* [PATCH 00/28] OpenChrome DRM for Linux 5.20
@ 2022-06-24 20:26 Kevin Brace
2022-06-24 20:26 ` [PATCH 01/28] drm/via: Add via_3d_reg.h Kevin Brace
` (20 more replies)
0 siblings, 21 replies; 34+ messages in thread
From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw)
To: dri-devel; +Cc: Kevin Brace
From: Kevin Brace <kevinbrace@bracecomputerlab.com>
Hi Dave and Daniel,
This is my first attempt (this is not a RFC posting) in trying to get
OpenChrome DRM pulled in for Linux 5.20.
I started to work on this seriously around the summer of 2017, so it has
been a long journey.
I know that the code is not quite perfect, but I have done as much work
as I can do on my own, and I now think that I should post the code on
dri-devel mailing list for other people to take a look at it.
Whether or not the code itself works or not, no, OpenChrome DRM is not
some vaporware, and the code reliability is comparable to the existing
OpenChrome DDX UMS code path.
The code reliability is more than good enough to the point where I utilize
the module almost every time I work on developing the code.
I am aware that the hardware (silicon) is quite old by today's standards,
so not too many people "still" (the word one open source software focused
journalist often uses to describe greater than 5 year old computer
hardware) own the VIA silicon hardware to actually test the code
themselves.
The current code is developed against drm-next branch
drm-next-2022-06-03-1 tag.
The current iteration of the code has no support for acceleration.
It is currently a mode setting only DRM module.
Even if the code is pulled into the Linux kernel tree, I will consider
the code experimental until at least 2D acceleration is implemented for
all supported devices.
Because of this, the DRM module requires via.modeset=1 to be added to
Linux kernel boot option line for it to function, and I intend to keep
this arrangement in place until at least 2D acceleration is fully
supported.
As a result, I think the code is fairly low risk to be pulled into the
Linux kernel tree.
The current module version is 3.5.2, but when the code is about to
be pulled into the kernel tree, I will like to up the version to 4.0.0.
This is because James Simmons era OpenChrome DRM used version number
3.0.x, but the current OpenChrome DRM uAPI implementation is different
from his implementation, so I will like to assign a new major version
(i.e., 4) so that DDX can distinguish the old and new OpenChrome DRM.
The current uAPI has no backward compatibility with the older DRI1 based
implementation, although some remnants of old DRI1 based uAPI still needs
to be there inside via_drm.h for XvMC based libraries on the DDX side to
properly compile.
It is my intention to replace the old DRI1 based VIA DRM located at
drivers/gpu/drm/via/ with OpenChrome DRM at the same location.
As I indicated previously, I do not wish to get pulled into the staging
area of the kernel tree.
I personally will like to have the option of porting the code to
BSD someday, however, the I2C bus access module (via_i2c.c) is GPL
based, so the DRM module license type is GPL (everything else is MIT
license based), for now.
I hope to replace this module someday with equivalent functionality
code that will be MIT license based.
I hope the uAPI variable types are compatible with BSD (please give
me advise on this since I do not know too much about this) since James
Simmons brought this up back in 2013 when he posted the code as RFC.
https://lists.freedesktop.org/archives/dri-devel/2013-June/039594.html
https://lists.freedesktop.org/archives/dri-devel/2013-June/040811.html
Features:
- Supports 12 different generations of VIA Technologies Chrome based
integrated graphics (CLE266 / KM400 / K8M800 / P4M800 Pro / PM800 /
P4M890 / K8M890 / P4M900 / CX700 / VX800 / VX855 / VX900 chipset) and
their variants
- Support for DAC (VGA), LVDS flat panel, DVI (CX700 / VX800 chipset
integrated, VX900 chipset integrated, and Silicon Image SiI164 /
VIA Technologies VT1632(A) DVI transmitter), and HDMI (VX900H chipset
integrated)
- Support for standby resume (ACPI S3 State)
- Support for dual head operation
- Supports atomic mode setting (implementation might still be incomplete
especially around gamma correction / palette initialization)
- Utilizes GEM / TTM for memory management
- Utilizes DRM FB Helper for FBDEV emulation
Known issues:
- via_lvds.c gives out 3 unused function warnings (willing to delete
the offending functions since they are not used)
- Gamma correction / palette initialization code is still legacy KMS
based (Daniel, how do I convert it for atomic mode setting?)
- uAPI might not be quite right (Do I need something like
DRM_IOCTL_VIA_GEM_DESTROY or DRM_IOCTL_VIA_GEM_FREE call to pair it
against DRM_IOCTL_VIA_GEM_CREATE?)
Code repository:
https://cgit.freedesktop.org/openchrome/drm-openchrome/
Current bleeding edge branch (drm-next-5.20 branch):
https://cgit.freedesktop.org/openchrome/drm-openchrome/?h=drm-next-5.20
Current bleeding edge branch (drm-next-5.20 branch) code location:
https://cgit.freedesktop.org/openchrome/drm-openchrome/tree/drivers/gpu/drm/via?h=drm-next-5.20
https://cgit.freedesktop.org/openchrome/drm-openchrome/tree/include/uapi/drm?h=drm-next-5.20
Obviously, I do not expect to get the code pulled in on my first try,
but if other people can point out what I need to improve, I will try to
improve the code so that I can get the code pulled in as soon as possible.
Personally, I will like the code to be pulled in for Linux 5.20, but I
sort of expect the next release after 5.20 is more likely.
Regards,
Kevin Brace
Brace Computer Laboratory blog
https://bracecomputerlab.com
---
Kevin Brace (28):
drm/via: Add via_3d_reg.h
drm/via: Add via_crtc_hw.h
drm/via: Add via_disp_reg.h
drm/via: Add via_drv.h
drm/via: Add via_regs.h
drm/via: Add via_crtc.c
drm/via: Add via_crtc_hw.c
drm/via: Add via_cursor.c
drm/via: Add via_dac.c
drm/via: Add via_display.c
drm/via: Add via_drv.c
drm/via: Add via_encoder.c
drm/via: Add via_hdmi.c
drm/via: Add via_i2c.c
drm/via: Add via_init.c
drm/via: Add via_ioctl.c
drm/via: Add via_lvds.c
drm/via: Add via_object.c
drm/via: Add via_pll.c
drm/via: Add via_pm.c
drm/via: Add via_sii164.c
drm/via: Add via_tmds.c
drm/via: Add via_ttm.c
drm/via: Add via_vt1632.c
drm/via: Add via_drm.h
drm/via: Add Kconfig
drm/via: Add Makefile
drm/via: Modify DRM main Makefile to be able to build OpenChrome DRM
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/via/Kconfig | 10 +
drivers/gpu/drm/via/Makefile | 26 +
drivers/gpu/drm/via/via_3d_reg.h | 1863 ++++++++++++++++++++++
drivers/gpu/drm/via/via_crtc.c | 2324 ++++++++++++++++++++++++++++
drivers/gpu/drm/via/via_crtc_hw.c | 91 ++
drivers/gpu/drm/via/via_crtc_hw.h | 1048 +++++++++++++
drivers/gpu/drm/via/via_cursor.c | 419 +++++
drivers/gpu/drm/via/via_dac.c | 504 ++++++
drivers/gpu/drm/via/via_disp_reg.h | 513 ++++++
drivers/gpu/drm/via/via_display.c | 125 ++
drivers/gpu/drm/via/via_drv.c | 313 ++++
drivers/gpu/drm/via/via_drv.h | 437 ++++++
drivers/gpu/drm/via/via_encoder.c | 173 +++
drivers/gpu/drm/via/via_hdmi.c | 719 +++++++++
drivers/gpu/drm/via/via_i2c.c | 209 +++
drivers/gpu/drm/via/via_init.c | 1300 ++++++++++++++++
drivers/gpu/drm/via/via_ioctl.c | 122 ++
drivers/gpu/drm/via/via_lvds.c | 1420 +++++++++++++++++
drivers/gpu/drm/via/via_object.c | 324 ++++
drivers/gpu/drm/via/via_pll.c | 263 ++++
drivers/gpu/drm/via/via_pm.c | 187 +++
drivers/gpu/drm/via/via_regs.h | 296 ++++
drivers/gpu/drm/via/via_sii164.c | 563 +++++++
drivers/gpu/drm/via/via_tmds.c | 714 +++++++++
drivers/gpu/drm/via/via_ttm.c | 168 ++
drivers/gpu/drm/via/via_vt1632.c | 583 +++++++
include/uapi/drm/via_drm.h | 309 ++++
28 files changed, 15024 insertions(+)
create mode 100644 drivers/gpu/drm/via/Kconfig
create mode 100644 drivers/gpu/drm/via/Makefile
create mode 100644 drivers/gpu/drm/via/via_3d_reg.h
create mode 100644 drivers/gpu/drm/via/via_crtc.c
create mode 100644 drivers/gpu/drm/via/via_crtc_hw.c
create mode 100644 drivers/gpu/drm/via/via_crtc_hw.h
create mode 100644 drivers/gpu/drm/via/via_cursor.c
create mode 100644 drivers/gpu/drm/via/via_dac.c
create mode 100644 drivers/gpu/drm/via/via_disp_reg.h
create mode 100644 drivers/gpu/drm/via/via_display.c
create mode 100644 drivers/gpu/drm/via/via_drv.c
create mode 100644 drivers/gpu/drm/via/via_drv.h
create mode 100644 drivers/gpu/drm/via/via_encoder.c
create mode 100644 drivers/gpu/drm/via/via_hdmi.c
create mode 100644 drivers/gpu/drm/via/via_i2c.c
create mode 100644 drivers/gpu/drm/via/via_init.c
create mode 100644 drivers/gpu/drm/via/via_ioctl.c
create mode 100644 drivers/gpu/drm/via/via_lvds.c
create mode 100644 drivers/gpu/drm/via/via_object.c
create mode 100644 drivers/gpu/drm/via/via_pll.c
create mode 100644 drivers/gpu/drm/via/via_pm.c
create mode 100644 drivers/gpu/drm/via/via_regs.h
create mode 100644 drivers/gpu/drm/via/via_sii164.c
create mode 100644 drivers/gpu/drm/via/via_tmds.c
create mode 100644 drivers/gpu/drm/via/via_ttm.c
create mode 100644 drivers/gpu/drm/via/via_vt1632.c
create mode 100644 include/uapi/drm/via_drm.h
--
2.35.1
^ permalink raw reply [flat|nested] 34+ messages in thread* [PATCH 01/28] drm/via: Add via_3d_reg.h 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 02/28] drm/via: Add via_crtc_hw.h Kevin Brace ` (19 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Originated from VIA Technologies. Currently unused. Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_3d_reg.h | 1863 ++++++++++++++++++++++++++++++ 1 file changed, 1863 insertions(+) create mode 100644 drivers/gpu/drm/via/via_3d_reg.h diff --git a/drivers/gpu/drm/via/via_3d_reg.h b/drivers/gpu/drm/via/via_3d_reg.h new file mode 100644 index 000000000000..fc74647f512a --- /dev/null +++ b/drivers/gpu/drm/via/via_3d_reg.h @@ -0,0 +1,1863 @@ +/* + * Copyright 1998-2011 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2011 S3 Graphics, Inc. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#ifndef VIA_3D_REG_H +#define VIA_3D_REG_H +#define HC_REG_BASE 0x0400 + +#define HC_REG_TRANS_SPACE 0x0040 + +#define HC_ParaN_MASK 0xffffffff +#define HC_Para_MASK 0x00ffffff +#define HC_SubA_MASK 0xff000000 +#define HC_SubA_SHIFT 24 +/* Transmission Setting + */ +#define HC_REG_TRANS_SET 0x003c +#define HC_ParaSubType_MASK 0xff000000 +#define HC_ParaType_MASK 0x00ff0000 +#define HC_ParaOS_MASK 0x0000ff00 +#define HC_ParaAdr_MASK 0x000000ff +#define HC_ParaSubType_SHIFT 24 +#define HC_ParaType_SHIFT 16 +#define HC_ParaOS_SHIFT 8 +#define HC_ParaAdr_SHIFT 0 + +#define HC_ParaType_CmdVdata 0x0000 +#define HC_ParaType_NotTex 0x0001 +#define HC_ParaType_Tex 0x0002 +#define HC_ParaType_Palette 0x0003 +#define HC_ParaType_PreCR 0x0010 +#define HC_ParaType_Auto 0x00fe +#define INV_ParaType_Dummy 0x00300000 + +/* Transmission Space + */ +#define HC_REG_Hpara0 0x0040 +#define HC_REG_HpataAF 0x02fc + +/* Read + */ +#define HC_REG_HREngSt 0x0000 +#define HC_REG_HRFIFOempty 0x0004 +#define HC_REG_HRFIFOfull 0x0008 +#define HC_REG_HRErr 0x000c +#define HC_REG_FIFOstatus 0x0010 +/* HC_REG_HREngSt 0x0000 + */ +#define HC_HDASZC_MASK 0x00010000 +#define HC_HSGEMI_MASK 0x0000f000 +#define HC_HLGEMISt_MASK 0x00000f00 +#define HC_HCRSt_MASK 0x00000080 +#define HC_HSE0St_MASK 0x00000040 +#define HC_HSE1St_MASK 0x00000020 +#define HC_HPESt_MASK 0x00000010 +#define HC_HXESt_MASK 0x00000008 +#define HC_HBESt_MASK 0x00000004 +#define HC_HE2St_MASK 0x00000002 +#define HC_HE3St_MASK 0x00000001 +/* HC_REG_HRFIFOempty 0x0004 + */ +#define HC_HRZDempty_MASK 0x00000010 +#define HC_HRTXAempty_MASK 0x00000008 +#define HC_HRTXDempty_MASK 0x00000004 +#define HC_HWZDempty_MASK 0x00000002 +#define HC_HWCDempty_MASK 0x00000001 +/* HC_REG_HRFIFOfull 0x0008 + */ +#define HC_HRZDfull_MASK 0x00000010 +#define HC_HRTXAfull_MASK 0x00000008 +#define HC_HRTXDfull_MASK 0x00000004 +#define HC_HWZDfull_MASK 0x00000002 +#define HC_HWCDfull_MASK 0x00000001 +/* HC_REG_HRErr 0x000c + */ +#define HC_HAGPCMErr_MASK 0x80000000 +#define HC_HAGPCMErrC_MASK 0x70000000 +/* HC_REG_FIFOstatus 0x0010 + */ +#define HC_HRFIFOATall_MASK 0x80000000 +#define HC_HRFIFOATbusy_MASK 0x40000000 +#define HC_HRATFGMDo_MASK 0x00000100 +#define HC_HRATFGMDi_MASK 0x00000080 +#define HC_HRATFRZD_MASK 0x00000040 +#define HC_HRATFRTXA_MASK 0x00000020 +#define HC_HRATFRTXD_MASK 0x00000010 +#define HC_HRATFWZD_MASK 0x00000008 +#define HC_HRATFWCD_MASK 0x00000004 +#define HC_HRATTXTAG_MASK 0x00000002 +#define HC_HRATTXCH_MASK 0x00000001 + +/* AGP Command Setting + */ +#define HC_SubA_HAGPBstL 0x0060 +#define HC_SubA_HAGPBendL 0x0061 +#define HC_SubA_HAGPCMNT 0x0062 +#define HC_SubA_HAGPBpL 0x0063 +#define HC_SubA_HAGPBpH 0x0064 +/* HC_SubA_HAGPCMNT 0x0062 + */ +#define HC_HAGPCMNT_MASK 0x00800000 +#define HC_HCmdErrClr_MASK 0x00400000 +#define HC_HAGPBendH_MASK 0x0000ff00 +#define HC_HAGPBstH_MASK 0x000000ff +#define HC_HAGPBendH_SHIFT 8 +#define HC_HAGPBstH_SHIFT 0 +/* HC_SubA_HAGPBpL 0x0063 + */ +#define HC_HAGPBpL_MASK 0x00fffffc +#define HC_HAGPBpID_MASK 0x00000003 +#define HC_HAGPBpID_PAUSE 0x00000000 +#define HC_HAGPBpID_JUMP 0x00000001 +#define HC_HAGPBpID_STOP 0x00000002 +/* HC_SubA_HAGPBpH 0x0064 + */ +#define HC_HAGPBpH_MASK 0x00ffffff + +/* Miscellaneous Settings + */ +#define HC_SubA_HClipTB 0x0070 +#define HC_SubA_HClipLR 0x0071 +#define HC_SubA_HFPClipTL 0x0072 +#define HC_SubA_HFPClipBL 0x0073 +#define HC_SubA_HFPClipLL 0x0074 +#define HC_SubA_HFPClipRL 0x0075 +#define HC_SubA_HFPClipTBH 0x0076 +#define HC_SubA_HFPClipLRH 0x0077 +#define HC_SubA_HLP 0x0078 +#define HC_SubA_HLPRF 0x0079 +#define HC_SubA_HSolidCL 0x007a +#define HC_SubA_HPixGC 0x007b +#define HC_SubA_HSPXYOS 0x007c +#define HC_SubA_HVertexCNT 0x007d + +#define HC_HClipT_MASK 0x00fff000 +#define HC_HClipT_SHIFT 12 +#define HC_HClipB_MASK 0x00000fff +#define HC_HClipB_SHIFT 0 +#define HC_HClipL_MASK 0x00fff000 +#define HC_HClipL_SHIFT 12 +#define HC_HClipR_MASK 0x00000fff +#define HC_HClipR_SHIFT 0 +#define HC_HFPClipBH_MASK 0x0000ff00 +#define HC_HFPClipBH_SHIFT 8 +#define HC_HFPClipTH_MASK 0x000000ff +#define HC_HFPClipTH_SHIFT 0 +#define HC_HFPClipRH_MASK 0x0000ff00 +#define HC_HFPClipRH_SHIFT 8 +#define HC_HFPClipLH_MASK 0x000000ff +#define HC_HFPClipLH_SHIFT 0 +#define HC_HSolidCH_MASK 0x000000ff +#define HC_HPixGC_MASK 0x00800000 +#define HC_HSPXOS_MASK 0x00fff000 +#define HC_HSPXOS_SHIFT 12 +#define HC_HSPYOS_MASK 0x00000fff + +/* Command + * Command A + */ +#define HC_HCmdHeader_MASK 0xfe000000 /*0xffe00000 */ +#define HC_HE3Fire_MASK 0x00100000 +#define HC_HPMType_MASK 0x000f0000 +#define HC_HEFlag_MASK 0x0000e000 +#define HC_HShading_MASK 0x00001c00 +#define HC_HPMValidN_MASK 0x00000200 +#define HC_HPLEND_MASK 0x00000100 +#define HC_HVCycle_MASK 0x000000ff +#define HC_HVCycle_Style_MASK 0x000000c0 +#define HC_HVCycle_ChgA_MASK 0x00000030 +#define HC_HVCycle_ChgB_MASK 0x0000000c +#define HC_HVCycle_ChgC_MASK 0x00000003 +#define HC_HPMType_Point 0x00000000 +#define HC_HPMType_Line 0x00010000 +#define HC_HPMType_Tri 0x00020000 +#define HC_HPMType_TriWF 0x00040000 +#define HC_HEFlag_NoAA 0x00000000 +#define HC_HEFlag_ab 0x00008000 +#define HC_HEFlag_bc 0x00004000 +#define HC_HEFlag_ca 0x00002000 +#define HC_HShading_Solid 0x00000000 +#define HC_HShading_FlatA 0x00000400 +#define HC_HShading_FlatB 0x00000800 +#define HC_HShading_FlatC 0x00000c00 +#define HC_HShading_Gouraud 0x00001000 +#define HC_HVCycle_Full 0x00000000 +#define HC_HVCycle_AFP 0x00000040 +#define HC_HVCycle_One 0x000000c0 +#define HC_HVCycle_NewA 0x00000000 +#define HC_HVCycle_AA 0x00000010 +#define HC_HVCycle_AB 0x00000020 +#define HC_HVCycle_AC 0x00000030 +#define HC_HVCycle_NewB 0x00000000 +#define HC_HVCycle_BA 0x00000004 +#define HC_HVCycle_BB 0x00000008 +#define HC_HVCycle_BC 0x0000000c +#define HC_HVCycle_NewC 0x00000000 +#define HC_HVCycle_CA 0x00000001 +#define HC_HVCycle_CB 0x00000002 +#define HC_HVCycle_CC 0x00000003 + +/* Command B + */ +#define HC_HLPrst_MASK 0x00010000 +#define HC_HLLastP_MASK 0x00008000 +#define HC_HVPMSK_MASK 0x00007f80 +#define HC_HBFace_MASK 0x00000040 +#define HC_H2nd1VT_MASK 0x0000003f +#define HC_HVPMSK_X 0x00004000 +#define HC_HVPMSK_Y 0x00002000 +#define HC_HVPMSK_Z 0x00001000 +#define HC_HVPMSK_W 0x00000800 +#define HC_HVPMSK_Cd 0x00000400 +#define HC_HVPMSK_Cs 0x00000200 +#define HC_HVPMSK_S 0x00000100 +#define HC_HVPMSK_T 0x00000080 + +/* Enable Setting + */ +#define HC_SubA_HEnable 0x0000 +#define HC_HenForce1P_MASK 0x00800000 /* [Force 1 Pipe] */ +#define HC_HenZDCheck_MASK 0x00400000 /* [Z dirty bit settings] */ +#define HC_HenTXEnvMap_MASK 0x00200000 +#define HC_HenVertexCNT_MASK 0x00100000 +#define HC_HenCPUDAZ_MASK 0x00080000 +#define HC_HenDASZWC_MASK 0x00040000 +#define HC_HenFBCull_MASK 0x00020000 +#define HC_HenCW_MASK 0x00010000 +#define HC_HenAA_MASK 0x00008000 +#define HC_HenST_MASK 0x00004000 +#define HC_HenZT_MASK 0x00002000 +#define HC_HenZW_MASK 0x00001000 +#define HC_HenAT_MASK 0x00000800 +#define HC_HenAW_MASK 0x00000400 +#define HC_HenSP_MASK 0x00000200 +#define HC_HenLP_MASK 0x00000100 +#define HC_HenTXCH_MASK 0x00000080 +#define HC_HenTXMP_MASK 0x00000040 +#define HC_HenTXPP_MASK 0x00000020 +#define HC_HenTXTR_MASK 0x00000010 +#define HC_HenCS_MASK 0x00000008 +#define HC_HenFOG_MASK 0x00000004 +#define HC_HenABL_MASK 0x00000002 +#define HC_HenDT_MASK 0x00000001 + +/* Z Setting + */ +#define HC_SubA_HZWBBasL 0x0010 +#define HC_SubA_HZWBBasH 0x0011 +#define HC_SubA_HZWBType 0x0012 +#define HC_SubA_HZBiasL 0x0013 +#define HC_SubA_HZWBend 0x0014 +#define HC_SubA_HZWTMD 0x0015 +#define HC_SubA_HZWCDL 0x0016 +#define HC_SubA_HZWCTAGnum 0x0017 +#define HC_SubA_HZCYNum 0x0018 +#define HC_SubA_HZWCFire 0x0019 +/* HC_SubA_HZWBType + */ +#define HC_HZWBType_MASK 0x00800000 +#define HC_HZBiasedWB_MASK 0x00400000 +#define HC_HZONEasFF_MASK 0x00200000 +#define HC_HZOONEasFF_MASK 0x00100000 +#define HC_HZWBFM_MASK 0x00030000 +#define HC_HZWBLoc_MASK 0x0000c000 +#define HC_HZWBPit_MASK 0x00003fff +#define HC_HZWBFM_16 0x00000000 +#define HC_HZWBFM_32 0x00020000 +#define HC_HZWBFM_24 0x00030000 +#define HC_HZWBLoc_Local 0x00000000 +#define HC_HZWBLoc_SyS 0x00004000 +/* HC_SubA_HZWBend + */ +#define HC_HZWBend_MASK 0x00ffe000 +#define HC_HZBiasH_MASK 0x000000ff +#define HC_HZWBend_SHIFT 10 +/* HC_SubA_HZWTMD + */ +#define HC_HZWTMD_MASK 0x00070000 +#define HC_HEBEBias_MASK 0x00007f00 +#define HC_HZNF_MASK 0x000000ff +#define HC_HZWTMD_NeverPass 0x00000000 +#define HC_HZWTMD_LT 0x00010000 +#define HC_HZWTMD_EQ 0x00020000 +#define HC_HZWTMD_LE 0x00030000 +#define HC_HZWTMD_GT 0x00040000 +#define HC_HZWTMD_NE 0x00050000 +#define HC_HZWTMD_GE 0x00060000 +#define HC_HZWTMD_AllPass 0x00070000 +#define HC_HEBEBias_SHIFT 8 +/* HC_SubA_HZWCDL 0x0016 + */ +#define HC_HZWCDL_MASK 0x00ffffff +/* HC_SubA_HZWCTAGnum 0x0017 + */ +#define HC_HZWCTAGnum_MASK 0x00ff0000 +#define HC_HZWCTAGnum_SHIFT 16 +#define HC_HZWCDH_MASK 0x000000ff +#define HC_HZWCDH_SHIFT 0 +/* HC_SubA_HZCYNum 0x0018 + */ +#define HC_HZCYNum_MASK 0x00030000 +#define HC_HZCYNum_SHIFT 16 +#define HC_HZWCQWnum_MASK 0x00003fff +#define HC_HZWCQWnum_SHIFT 0 +/* HC_SubA_HZWCFire 0x0019 + */ +#define HC_ZWCFire_MASK 0x00010000 +#define HC_HZWCQWnumLast_MASK 0x00003fff +#define HC_HZWCQWnumLast_SHIFT 0 + +/* Stencil Setting + */ +#define HC_SubA_HSTREF 0x0023 +#define HC_SubA_HSTMD 0x0024 +/* HC_SubA_HSBFM + */ +#define HC_HSBFM_MASK 0x00030000 +#define HC_HSBLoc_MASK 0x0000c000 +#define HC_HSBPit_MASK 0x00003fff +/* HC_SubA_HSTREF + */ +#define HC_HSTREF_MASK 0x00ff0000 +#define HC_HSTOPMSK_MASK 0x0000ff00 +#define HC_HSTBMSK_MASK 0x000000ff +#define HC_HSTREF_SHIFT 16 +#define HC_HSTOPMSK_SHIFT 8 +/* HC_SubA_HSTMD + */ +#define HC_HSTMD_MASK 0x00070000 +#define HC_HSTOPSF_MASK 0x000001c0 +#define HC_HSTOPSPZF_MASK 0x00000038 +#define HC_HSTOPSPZP_MASK 0x00000007 +#define HC_HSTMD_NeverPass 0x00000000 +#define HC_HSTMD_LT 0x00010000 +#define HC_HSTMD_EQ 0x00020000 +#define HC_HSTMD_LE 0x00030000 +#define HC_HSTMD_GT 0x00040000 +#define HC_HSTMD_NE 0x00050000 +#define HC_HSTMD_GE 0x00060000 +#define HC_HSTMD_AllPass 0x00070000 +#define HC_HSTOPSF_KEEP 0x00000000 +#define HC_HSTOPSF_ZERO 0x00000040 +#define HC_HSTOPSF_REPLACE 0x00000080 +#define HC_HSTOPSF_INCRSAT 0x000000c0 +#define HC_HSTOPSF_DECRSAT 0x00000100 +#define HC_HSTOPSF_INVERT 0x00000140 +#define HC_HSTOPSF_INCR 0x00000180 +#define HC_HSTOPSF_DECR 0x000001c0 +#define HC_HSTOPSPZF_KEEP 0x00000000 +#define HC_HSTOPSPZF_ZERO 0x00000008 +#define HC_HSTOPSPZF_REPLACE 0x00000010 +#define HC_HSTOPSPZF_INCRSAT 0x00000018 +#define HC_HSTOPSPZF_DECRSAT 0x00000020 +#define HC_HSTOPSPZF_INVERT 0x00000028 +#define HC_HSTOPSPZF_INCR 0x00000030 +#define HC_HSTOPSPZF_DECR 0x00000038 +#define HC_HSTOPSPZP_KEEP 0x00000000 +#define HC_HSTOPSPZP_ZERO 0x00000001 +#define HC_HSTOPSPZP_REPLACE 0x00000002 +#define HC_HSTOPSPZP_INCRSAT 0x00000003 +#define HC_HSTOPSPZP_DECRSAT 0x00000004 +#define HC_HSTOPSPZP_INVERT 0x00000005 +#define HC_HSTOPSPZP_INCR 0x00000006 +#define HC_HSTOPSPZP_DECR 0x00000007 + +/* Alpha Setting + */ +#define HC_SubA_HABBasL 0x0030 +#define HC_SubA_HABBasH 0x0031 +#define HC_SubA_HABFM 0x0032 +#define HC_SubA_HATMD 0x0033 +#define HC_SubA_HABLCsat 0x0034 +#define HC_SubA_HABLCop 0x0035 +#define HC_SubA_HABLAsat 0x0036 +#define HC_SubA_HABLAop 0x0037 +#define HC_SubA_HABLRCa 0x0038 +#define HC_SubA_HABLRFCa 0x0039 +#define HC_SubA_HABLRCbias 0x003a +#define HC_SubA_HABLRCb 0x003b +#define HC_SubA_HABLRFCb 0x003c +#define HC_SubA_HABLRAa 0x003d +#define HC_SubA_HABLRAb 0x003e +/* HC_SubA_HABFM + */ +#define HC_HABFM_MASK 0x00030000 +#define HC_HABLoc_MASK 0x0000c000 +#define HC_HABPit_MASK 0x000007ff +/* HC_SubA_HATMD + */ +#define HC_HATMD_MASK 0x00000700 +#define HC_HATREF_MASK 0x000000ff +#define HC_HATMD_NeverPass 0x00000000 +#define HC_HATMD_LT 0x00000100 +#define HC_HATMD_EQ 0x00000200 +#define HC_HATMD_LE 0x00000300 +#define HC_HATMD_GT 0x00000400 +#define HC_HATMD_NE 0x00000500 +#define HC_HATMD_GE 0x00000600 +#define HC_HATMD_AllPass 0x00000700 +/* HC_SubA_HABLCsat + */ +#define HC_HABLCsat_MASK 0x00010000 +#define HC_HABLCa_MASK 0x0000fc00 +#define HC_HABLCa_C_MASK 0x0000c000 +#define HC_HABLCa_OPC_MASK 0x00003c00 +#define HC_HABLFCa_MASK 0x000003f0 +#define HC_HABLFCa_C_MASK 0x00000300 +#define HC_HABLFCa_OPC_MASK 0x000000f0 +#define HC_HABLCbias_MASK 0x0000000f +#define HC_HABLCbias_C_MASK 0x00000008 +#define HC_HABLCbias_OPC_MASK 0x00000007 +/*-- Define the input color. + */ +#define HC_XC_Csrc 0x00000000 +#define HC_XC_Cdst 0x00000001 +#define HC_XC_Asrc 0x00000002 +#define HC_XC_Adst 0x00000003 +#define HC_XC_Fog 0x00000004 +#define HC_XC_HABLRC 0x00000005 +#define HC_XC_minSrcDst 0x00000006 +#define HC_XC_maxSrcDst 0x00000007 +#define HC_XC_mimAsrcInvAdst 0x00000008 +#define HC_XC_OPC 0x00000000 +#define HC_XC_InvOPC 0x00000010 +#define HC_XC_OPCp5 0x00000020 +/*-- Define the input Alpha + */ +#define HC_XA_OPA 0x00000000 +#define HC_XA_InvOPA 0x00000010 +#define HC_XA_OPAp5 0x00000020 +#define HC_XA_0 0x00000000 +#define HC_XA_Asrc 0x00000001 +#define HC_XA_Adst 0x00000002 +#define HC_XA_Fog 0x00000003 +#define HC_XA_minAsrcFog 0x00000004 +#define HC_XA_minAsrcAdst 0x00000005 +#define HC_XA_maxAsrcFog 0x00000006 +#define HC_XA_maxAsrcAdst 0x00000007 +#define HC_XA_HABLRA 0x00000008 +#define HC_XA_minAsrcInvAdst 0x00000008 +#define HC_XA_HABLFRA 0x00000009 +/*-- + */ +#define HC_HABLCa_OPC (HC_XC_OPC << 10) +#define HC_HABLCa_InvOPC (HC_XC_InvOPC << 10) +#define HC_HABLCa_OPCp5 (HC_XC_OPCp5 << 10) +#define HC_HABLCa_Csrc (HC_XC_Csrc << 10) +#define HC_HABLCa_Cdst (HC_XC_Cdst << 10) +#define HC_HABLCa_Asrc (HC_XC_Asrc << 10) +#define HC_HABLCa_Adst (HC_XC_Adst << 10) +#define HC_HABLCa_Fog (HC_XC_Fog << 10) +#define HC_HABLCa_HABLRCa (HC_XC_HABLRC << 10) +#define HC_HABLCa_minSrcDst (HC_XC_minSrcDst << 10) +#define HC_HABLCa_maxSrcDst (HC_XC_maxSrcDst << 10) +#define HC_HABLFCa_OPC (HC_XC_OPC << 4) +#define HC_HABLFCa_InvOPC (HC_XC_InvOPC << 4) +#define HC_HABLFCa_OPCp5 (HC_XC_OPCp5 << 4) +#define HC_HABLFCa_Csrc (HC_XC_Csrc << 4) +#define HC_HABLFCa_Cdst (HC_XC_Cdst << 4) +#define HC_HABLFCa_Asrc (HC_XC_Asrc << 4) +#define HC_HABLFCa_Adst (HC_XC_Adst << 4) +#define HC_HABLFCa_Fog (HC_XC_Fog << 4) +#define HC_HABLFCa_HABLRCa (HC_XC_HABLRC << 4) +#define HC_HABLFCa_minSrcDst (HC_XC_minSrcDst << 4) +#define HC_HABLFCa_maxSrcDst (HC_XC_maxSrcDst << 4) +#define HC_HABLFCa_mimAsrcInvAdst (HC_XC_mimAsrcInvAdst << 4) +#define HC_HABLCbias_HABLRCbias 0x00000000 +#define HC_HABLCbias_Asrc 0x00000001 +#define HC_HABLCbias_Adst 0x00000002 +#define HC_HABLCbias_Fog 0x00000003 +#define HC_HABLCbias_Cin 0x00000004 +/* HC_SubA_HABLCop 0x0035 + */ +#define HC_HABLdot_MASK 0x00010000 +#define HC_HABLCop_MASK 0x00004000 +#define HC_HABLCb_MASK 0x00003f00 +#define HC_HABLCb_C_MASK 0x00003000 +#define HC_HABLCb_OPC_MASK 0x00000f00 +#define HC_HABLFCb_MASK 0x000000fc +#define HC_HABLFCb_C_MASK 0x000000c0 +#define HC_HABLFCb_OPC_MASK 0x0000003c +#define HC_HABLCshift_MASK 0x00000003 +#define HC_HABLCb_OPC (HC_XC_OPC << 8) +#define HC_HABLCb_InvOPC (HC_XC_InvOPC << 8) +#define HC_HABLCb_OPCp5 (HC_XC_OPCp5 << 8) +#define HC_HABLCb_Csrc (HC_XC_Csrc << 8) +#define HC_HABLCb_Cdst (HC_XC_Cdst << 8) +#define HC_HABLCb_Asrc (HC_XC_Asrc << 8) +#define HC_HABLCb_Adst (HC_XC_Adst << 8) +#define HC_HABLCb_Fog (HC_XC_Fog << 8) +#define HC_HABLCb_HABLRCa (HC_XC_HABLRC << 8) +#define HC_HABLCb_minSrcDst (HC_XC_minSrcDst << 8) +#define HC_HABLCb_maxSrcDst (HC_XC_maxSrcDst << 8) +#define HC_HABLFCb_OPC (HC_XC_OPC << 2) +#define HC_HABLFCb_InvOPC (HC_XC_InvOPC << 2) +#define HC_HABLFCb_OPCp5 (HC_XC_OPCp5 << 2) +#define HC_HABLFCb_Csrc (HC_XC_Csrc << 2) +#define HC_HABLFCb_Cdst (HC_XC_Cdst << 2) +#define HC_HABLFCb_Asrc (HC_XC_Asrc << 2) +#define HC_HABLFCb_Adst (HC_XC_Adst << 2) +#define HC_HABLFCb_Fog (HC_XC_Fog << 2) +#define HC_HABLFCb_HABLRCb (HC_XC_HABLRC << 2) +#define HC_HABLFCb_minSrcDst (HC_XC_minSrcDst << 2) +#define HC_HABLFCb_maxSrcDst (HC_XC_maxSrcDst << 2) +#define HC_HABLFCb_mimAsrcInvAdst (HC_XC_mimAsrcInvAdst << 2) +/* HC_SubA_HABLAsat 0x0036 + */ +#define HC_HABLAsat_MASK 0x00010000 +#define HC_HABLAa_MASK 0x0000fc00 +#define HC_HABLAa_A_MASK 0x0000c000 +#define HC_HABLAa_OPA_MASK 0x00003c00 +#define HC_HABLFAa_MASK 0x000003f0 +#define HC_HABLFAa_A_MASK 0x00000300 +#define HC_HABLFAa_OPA_MASK 0x000000f0 +#define HC_HABLAbias_MASK 0x0000000f +#define HC_HABLAbias_A_MASK 0x00000008 +#define HC_HABLAbias_OPA_MASK 0x00000007 +#define HC_HABLAa_OPA (HC_XA_OPA << 10) +#define HC_HABLAa_InvOPA (HC_XA_InvOPA << 10) +#define HC_HABLAa_OPAp5 (HC_XA_OPAp5 << 10) +#define HC_HABLAa_0 (HC_XA_0 << 10) +#define HC_HABLAa_Asrc (HC_XA_Asrc << 10) +#define HC_HABLAa_Adst (HC_XA_Adst << 10) +#define HC_HABLAa_Fog (HC_XA_Fog << 10) +#define HC_HABLAa_minAsrcFog (HC_XA_minAsrcFog << 10) +#define HC_HABLAa_minAsrcAdst (HC_XA_minAsrcAdst << 10) +#define HC_HABLAa_maxAsrcFog (HC_XA_maxAsrcFog << 10) +#define HC_HABLAa_maxAsrcAdst (HC_XA_maxAsrcAdst << 10) +#define HC_HABLAa_HABLRA (HC_XA_HABLRA << 10) +#define HC_HABLFAa_OPA (HC_XA_OPA << 4) +#define HC_HABLFAa_InvOPA (HC_XA_InvOPA << 4) +#define HC_HABLFAa_OPAp5 (HC_XA_OPAp5 << 4) +#define HC_HABLFAa_0 (HC_XA_0 << 4) +#define HC_HABLFAa_Asrc (HC_XA_Asrc << 4) +#define HC_HABLFAa_Adst (HC_XA_Adst << 4) +#define HC_HABLFAa_Fog (HC_XA_Fog << 4) +#define HC_HABLFAa_minAsrcFog (HC_XA_minAsrcFog << 4) +#define HC_HABLFAa_minAsrcAdst (HC_XA_minAsrcAdst << 4) +#define HC_HABLFAa_maxAsrcFog (HC_XA_maxAsrcFog << 4) +#define HC_HABLFAa_maxAsrcAdst (HC_XA_maxAsrcAdst << 4) +#define HC_HABLFAa_minAsrcInvAdst (HC_XA_minAsrcInvAdst << 4) +#define HC_HABLFAa_HABLFRA (HC_XA_HABLFRA << 4) +#define HC_HABLAbias_HABLRAbias 0x00000000 +#define HC_HABLAbias_Asrc 0x00000001 +#define HC_HABLAbias_Adst 0x00000002 +#define HC_HABLAbias_Fog 0x00000003 +#define HC_HABLAbias_Aaa 0x00000004 +/* HC_SubA_HABLAop 0x0037 + */ +#define HC_HABLAop_MASK 0x00004000 +#define HC_HABLAb_MASK 0x00003f00 +#define HC_HABLAb_OPA_MASK 0x00000f00 +#define HC_HABLFAb_MASK 0x000000fc +#define HC_HABLFAb_OPA_MASK 0x0000003c +#define HC_HABLAshift_MASK 0x00000003 +#define HC_HABLAb_OPA (HC_XA_OPA << 8) +#define HC_HABLAb_InvOPA (HC_XA_InvOPA << 8) +#define HC_HABLAb_OPAp5 (HC_XA_OPAp5 << 8) +#define HC_HABLAb_0 (HC_XA_0 << 8) +#define HC_HABLAb_Asrc (HC_XA_Asrc << 8) +#define HC_HABLAb_Adst (HC_XA_Adst << 8) +#define HC_HABLAb_Fog (HC_XA_Fog << 8) +#define HC_HABLAb_minAsrcFog (HC_XA_minAsrcFog << 8) +#define HC_HABLAb_minAsrcAdst (HC_XA_minAsrcAdst << 8) +#define HC_HABLAb_maxAsrcFog (HC_XA_maxAsrcFog << 8) +#define HC_HABLAb_maxAsrcAdst (HC_XA_maxAsrcAdst << 8) +#define HC_HABLAb_HABLRA (HC_XA_HABLRA << 8) +#define HC_HABLFAb_OPA (HC_XA_OPA << 2) +#define HC_HABLFAb_InvOPA (HC_XA_InvOPA << 2) +#define HC_HABLFAb_OPAp5 (HC_XA_OPAp5 << 2) +#define HC_HABLFAb_0 (HC_XA_0 << 2) +#define HC_HABLFAb_Asrc (HC_XA_Asrc << 2) +#define HC_HABLFAb_Adst (HC_XA_Adst << 2) +#define HC_HABLFAb_Fog (HC_XA_Fog << 2) +#define HC_HABLFAb_minAsrcFog (HC_XA_minAsrcFog << 2) +#define HC_HABLFAb_minAsrcAdst (HC_XA_minAsrcAdst << 2) +#define HC_HABLFAb_maxAsrcFog (HC_XA_maxAsrcFog << 2) +#define HC_HABLFAb_maxAsrcAdst (HC_XA_maxAsrcAdst << 2) +#define HC_HABLFAb_minAsrcInvAdst (HC_XA_minAsrcInvAdst << 2) +#define HC_HABLFAb_HABLFRA (HC_XA_HABLFRA << 2) +/* HC_SubA_HABLRAa 0x003d + */ +#define HC_HABLRAa_MASK 0x00ff0000 +#define HC_HABLRFAa_MASK 0x0000ff00 +#define HC_HABLRAbias_MASK 0x000000ff +#define HC_HABLRAa_SHIFT 16 +#define HC_HABLRFAa_SHIFT 8 +/* HC_SubA_HABLRAb 0x003e + */ +#define HC_HABLRAb_MASK 0x0000ff00 +#define HC_HABLRFAb_MASK 0x000000ff +#define HC_HABLRAb_SHIFT 8 + +/* Destination Setting + */ +#define HC_SubA_HDBBasL 0x0040 +#define HC_SubA_HDBBasH 0x0041 +#define HC_SubA_HDBFM 0x0042 +#define HC_SubA_HFBBMSKL 0x0043 +#define HC_SubA_HROP 0x0044 +/* HC_SubA_HDBFM 0x0042 + */ +#define HC_HDBFM_MASK 0x001f0000 +#define HC_HDBLoc_MASK 0x0000c000 +#define HC_HDBPit_MASK 0x00003fff +#define HC_HDBFM_RGB555 0x00000000 +#define HC_HDBFM_RGB565 0x00010000 +#define HC_HDBFM_ARGB4444 0x00020000 +#define HC_HDBFM_ARGB1555 0x00030000 +#define HC_HDBFM_BGR555 0x00040000 +#define HC_HDBFM_BGR565 0x00050000 +#define HC_HDBFM_ABGR4444 0x00060000 +#define HC_HDBFM_ABGR1555 0x00070000 +#define HC_HDBFM_ARGB0888 0x00080000 +#define HC_HDBFM_ARGB8888 0x00090000 +#define HC_HDBFM_ABGR0888 0x000a0000 +#define HC_HDBFM_ABGR8888 0x000b0000 +#define HC_HDBLoc_Local 0x00000000 +#define HC_HDBLoc_Sys 0x00004000 +/* HC_SubA_HROP 0x0044 + */ +#define HC_HROP_MASK 0x00000f00 +#define HC_HFBBMSKH_MASK 0x000000ff +#define HC_HROP_BLACK 0x00000000 +#define HC_HROP_DPon 0x00000100 +#define HC_HROP_DPna 0x00000200 +#define HC_HROP_Pn 0x00000300 +#define HC_HROP_PDna 0x00000400 +#define HC_HROP_Dn 0x00000500 +#define HC_HROP_DPx 0x00000600 +#define HC_HROP_DPan 0x00000700 +#define HC_HROP_DPa 0x00000800 +#define HC_HROP_DPxn 0x00000900 +#define HC_HROP_D 0x00000a00 +#define HC_HROP_DPno 0x00000b00 +#define HC_HROP_P 0x00000c00 +#define HC_HROP_PDno 0x00000d00 +#define HC_HROP_DPo 0x00000e00 +#define HC_HROP_WHITE 0x00000f00 + +/* Fog Setting + */ +#define HC_SubA_HFogLF 0x0050 +#define HC_SubA_HFogCL 0x0051 +#define HC_SubA_HFogCH 0x0052 +#define HC_SubA_HFogStL 0x0053 +#define HC_SubA_HFogStH 0x0054 +#define HC_SubA_HFogOOdMF 0x0055 +#define HC_SubA_HFogOOdEF 0x0056 +#define HC_SubA_HFogEndL 0x0057 +#define HC_SubA_HFogDenst 0x0058 +/* HC_SubA_FogLF 0x0050 + */ +#define HC_FogLF_MASK 0x00000010 +#define HC_FogEq_MASK 0x00000008 +#define HC_FogMD_MASK 0x00000007 +#define HC_FogMD_LocalFog 0x00000000 +#define HC_FogMD_LinearFog 0x00000002 +#define HC_FogMD_ExponentialFog 0x00000004 +#define HC_FogMD_Exponential2Fog 0x00000005 +/* #define HC_FogMD_FogTable 0x00000003 */ + +/* HC_SubA_HFogDenst 0x0058 + */ +#define HC_FogDenst_MASK 0x001fff00 +#define HC_FogEndL_MASK 0x000000ff + +/* Texture subtype definitions + */ +#define HC_SubType_Samp0 0x00000020 +#define HC_SubType_Samp1 0x00000021 + + +/* Texture subtype definitions + */ +#define HC_SubType_Tex0 0x00000000 +#define HC_SubType_Tex1 0x00000001 +#define HC_SubType_TexGeneral 0x000000fe + +/* Attribute of texture n + */ +#define HC_SubA_HTXnL0BasL 0x0000 +#define HC_SubA_HTXnL1BasL 0x0001 +#define HC_SubA_HTXnL2BasL 0x0002 +#define HC_SubA_HTXnL3BasL 0x0003 +#define HC_SubA_HTXnL4BasL 0x0004 +#define HC_SubA_HTXnL5BasL 0x0005 +#define HC_SubA_HTXnL6BasL 0x0006 +#define HC_SubA_HTXnL7BasL 0x0007 +#define HC_SubA_HTXnL8BasL 0x0008 +#define HC_SubA_HTXnL9BasL 0x0009 +#define HC_SubA_HTXnLaBasL 0x000a +#define HC_SubA_HTXnLbBasL 0x000b +#define HC_SubA_HTXnLcBasL 0x000c +#define HC_SubA_HTXnLdBasL 0x000d +#define HC_SubA_HTXnLeBasL 0x000e +#define HC_SubA_HTXnLfBasL 0x000f +#define HC_SubA_HTXnL10BasL 0x0010 +#define HC_SubA_HTXnL11BasL 0x0011 +#define HC_SubA_HTXnL012BasH 0x0020 +#define HC_SubA_HTXnL345BasH 0x0021 +#define HC_SubA_HTXnL678BasH 0x0022 +#define HC_SubA_HTXnL9abBasH 0x0023 +#define HC_SubA_HTXnLcdeBasH 0x0024 +#define HC_SubA_HTXnLf1011BasH 0x0025 +#define HC_SubA_HTXnL0Pit 0x002b +#define HC_SubA_HTXnL1Pit 0x002c +#define HC_SubA_HTXnL2Pit 0x002d +#define HC_SubA_HTXnL3Pit 0x002e +#define HC_SubA_HTXnL4Pit 0x002f +#define HC_SubA_HTXnL5Pit 0x0030 +#define HC_SubA_HTXnL6Pit 0x0031 +#define HC_SubA_HTXnL7Pit 0x0032 +#define HC_SubA_HTXnL8Pit 0x0033 +#define HC_SubA_HTXnL9Pit 0x0034 +#define HC_SubA_HTXnLaPit 0x0035 +#define HC_SubA_HTXnLbPit 0x0036 +#define HC_SubA_HTXnLcPit 0x0037 +#define HC_SubA_HTXnLdPit 0x0038 +#define HC_SubA_HTXnLePit 0x0039 +#define HC_SubA_HTXnLfPit 0x003a +#define HC_SubA_HTXnL10Pit 0x003b +#define HC_SubA_HTXnL11Pit 0x003c +#define HC_SubA_HTXnL0_5WE 0x004b +#define HC_SubA_HTXnL6_bWE 0x004c +#define HC_SubA_HTXnLc_11WE 0x004d +#define HC_SubA_HTXnL0_5HE 0x0051 +#define HC_SubA_HTXnL6_bHE 0x0052 +#define HC_SubA_HTXnLc_11HE 0x0053 +#define HC_SubA_HTXnL0OS 0x0077 +#define HC_SubA_HTXnTB 0x0078 +#define HC_SubA_HTXnMPMD 0x0079 +#define HC_SubA_HTXnCLODu 0x007a +#define HC_SubA_HTXnFM 0x007b +#define HC_SubA_HTXnTRCH 0x007c +#define HC_SubA_HTXnTRCL 0x007d +#define HC_SubA_HTXnTBC 0x007e +#define HC_SubA_HTXnTRAH 0x007f +#define HC_SubA_HTXnTBLCsat 0x0080 +#define HC_SubA_HTXnTBLCop 0x0081 +#define HC_SubA_HTXnTBLMPfog 0x0082 +#define HC_SubA_HTXnTBLAsat 0x0083 +#define HC_SubA_HTXnTBLRCa 0x0085 +#define HC_SubA_HTXnTBLRCb 0x0086 +#define HC_SubA_HTXnTBLRCc 0x0087 +#define HC_SubA_HTXnTBLRCbias 0x0088 +#define HC_SubA_HTXnTBLRAa 0x0089 +#define HC_SubA_HTXnTBLRFog 0x008a +#define HC_SubA_HTXnBumpM00 0x0090 +#define HC_SubA_HTXnBumpM01 0x0091 +#define HC_SubA_HTXnBumpM10 0x0092 +#define HC_SubA_HTXnBumpM11 0x0093 +#define HC_SubA_HTXnLScale 0x0094 + +#define HC_SubA_HTXSMD 0x0000 +#define HC_SubA_HTXYUV2RGB1 0x0001 +#define HC_SubA_HTXYUV2RGB2 0x0002 +#define HC_SubA_HTXYUV2RGB3 0x0003 +#define HTXYUV2RGB4BT601 (1<<23) +#define HTXYUV2RGB4BT709 (1<<22) +/* HC_SubA_HTXnL012BasH 0x0020 + */ +#define HC_HTXnL0BasH_MASK 0x000000ff +#define HC_HTXnL1BasH_MASK 0x0000ff00 +#define HC_HTXnL2BasH_MASK 0x00ff0000 +#define HC_HTXnL1BasH_SHIFT 8 +#define HC_HTXnL2BasH_SHIFT 16 +/* HC_SubA_HTXnL345BasH 0x0021 + */ +#define HC_HTXnL3BasH_MASK 0x000000ff +#define HC_HTXnL4BasH_MASK 0x0000ff00 +#define HC_HTXnL5BasH_MASK 0x00ff0000 +#define HC_HTXnL4BasH_SHIFT 8 +#define HC_HTXnL5BasH_SHIFT 16 +/* HC_SubA_HTXnL678BasH 0x0022 + */ +#define HC_HTXnL6BasH_MASK 0x000000ff +#define HC_HTXnL7BasH_MASK 0x0000ff00 +#define HC_HTXnL8BasH_MASK 0x00ff0000 +#define HC_HTXnL7BasH_SHIFT 8 +#define HC_HTXnL8BasH_SHIFT 16 +/* HC_SubA_HTXnL9abBasH 0x0023 + */ +#define HC_HTXnL9BasH_MASK 0x000000ff +#define HC_HTXnLaBasH_MASK 0x0000ff00 +#define HC_HTXnLbBasH_MASK 0x00ff0000 +#define HC_HTXnLaBasH_SHIFT 8 +#define HC_HTXnLbBasH_SHIFT 16 +/* HC_SubA_HTXnLcdeBasH 0x0024 + */ +#define HC_HTXnLcBasH_MASK 0x000000ff +#define HC_HTXnLdBasH_MASK 0x0000ff00 +#define HC_HTXnLeBasH_MASK 0x00ff0000 +#define HC_HTXnLdBasH_SHIFT 8 +#define HC_HTXnLeBasH_SHIFT 16 +/* HC_SubA_HTXnLcdeBasH 0x0025 + */ +#define HC_HTXnLfBasH_MASK 0x000000ff +#define HC_HTXnL10BasH_MASK 0x0000ff00 +#define HC_HTXnL11BasH_MASK 0x00ff0000 +#define HC_HTXnL10BasH_SHIFT 8 +#define HC_HTXnL11BasH_SHIFT 16 +/* HC_SubA_HTXnL0Pit 0x002b + */ +#define HC_HTXnLnPit_MASK 0x00003fff +#define HC_HTXnEnPit_MASK 0x00080000 +#define HC_HTXnLnPitE_MASK 0x00f00000 +#define HC_HTXnLnPitE_SHIFT 20 +/* HC_SubA_HTXnL0_5WE 0x004b + */ +#define HC_HTXnL0WE_MASK 0x0000000f +#define HC_HTXnL1WE_MASK 0x000000f0 +#define HC_HTXnL2WE_MASK 0x00000f00 +#define HC_HTXnL3WE_MASK 0x0000f000 +#define HC_HTXnL4WE_MASK 0x000f0000 +#define HC_HTXnL5WE_MASK 0x00f00000 +#define HC_HTXnL1WE_SHIFT 4 +#define HC_HTXnL2WE_SHIFT 8 +#define HC_HTXnL3WE_SHIFT 12 +#define HC_HTXnL4WE_SHIFT 16 +#define HC_HTXnL5WE_SHIFT 20 +/* HC_SubA_HTXnL6_bWE 0x004c + */ +#define HC_HTXnL6WE_MASK 0x0000000f +#define HC_HTXnL7WE_MASK 0x000000f0 +#define HC_HTXnL8WE_MASK 0x00000f00 +#define HC_HTXnL9WE_MASK 0x0000f000 +#define HC_HTXnLaWE_MASK 0x000f0000 +#define HC_HTXnLbWE_MASK 0x00f00000 +#define HC_HTXnL7WE_SHIFT 4 +#define HC_HTXnL8WE_SHIFT 8 +#define HC_HTXnL9WE_SHIFT 12 +#define HC_HTXnLaWE_SHIFT 16 +#define HC_HTXnLbWE_SHIFT 20 +/* HC_SubA_HTXnLc_11WE 0x004d + */ +#define HC_HTXnLcWE_MASK 0x0000000f +#define HC_HTXnLdWE_MASK 0x000000f0 +#define HC_HTXnLeWE_MASK 0x00000f00 +#define HC_HTXnLfWE_MASK 0x0000f000 +#define HC_HTXnL10WE_MASK 0x000f0000 +#define HC_HTXnL11WE_MASK 0x00f00000 +#define HC_HTXnLdWE_SHIFT 4 +#define HC_HTXnLeWE_SHIFT 8 +#define HC_HTXnLfWE_SHIFT 12 +#define HC_HTXnL10WE_SHIFT 16 +#define HC_HTXnL11WE_SHIFT 20 +/* HC_SubA_HTXnL0_5HE 0x0051 + */ +#define HC_HTXnL0HE_MASK 0x0000000f +#define HC_HTXnL1HE_MASK 0x000000f0 +#define HC_HTXnL2HE_MASK 0x00000f00 +#define HC_HTXnL3HE_MASK 0x0000f000 +#define HC_HTXnL4HE_MASK 0x000f0000 +#define HC_HTXnL5HE_MASK 0x00f00000 +#define HC_HTXnL1HE_SHIFT 4 +#define HC_HTXnL2HE_SHIFT 8 +#define HC_HTXnL3HE_SHIFT 12 +#define HC_HTXnL4HE_SHIFT 16 +#define HC_HTXnL5HE_SHIFT 20 +/* HC_SubA_HTXnL6_bHE 0x0052 + */ +#define HC_HTXnL6HE_MASK 0x0000000f +#define HC_HTXnL7HE_MASK 0x000000f0 +#define HC_HTXnL8HE_MASK 0x00000f00 +#define HC_HTXnL9HE_MASK 0x0000f000 +#define HC_HTXnLaHE_MASK 0x000f0000 +#define HC_HTXnLbHE_MASK 0x00f00000 +#define HC_HTXnL7HE_SHIFT 4 +#define HC_HTXnL8HE_SHIFT 8 +#define HC_HTXnL9HE_SHIFT 12 +#define HC_HTXnLaHE_SHIFT 16 +#define HC_HTXnLbHE_SHIFT 20 +/* HC_SubA_HTXnLc_11HE 0x0053 + */ +#define HC_HTXnLcHE_MASK 0x0000000f +#define HC_HTXnLdHE_MASK 0x000000f0 +#define HC_HTXnLeHE_MASK 0x00000f00 +#define HC_HTXnLfHE_MASK 0x0000f000 +#define HC_HTXnL10HE_MASK 0x000f0000 +#define HC_HTXnL11HE_MASK 0x00f00000 +#define HC_HTXnLdHE_SHIFT 4 +#define HC_HTXnLeHE_SHIFT 8 +#define HC_HTXnLfHE_SHIFT 12 +#define HC_HTXnL10HE_SHIFT 16 +#define HC_HTXnL11HE_SHIFT 20 +/* HC_SubA_HTXnL0OS 0x0077 + */ +#define HC_HTXnL0OS_MASK 0x003ff000 +#define HC_HTXnLVmax_MASK 0x00000fc0 +#define HC_HTXnLVmin_MASK 0x0000003f +#define HC_HTXnL0OS_SHIFT 12 +#define HC_HTXnLVmax_SHIFT 6 +/* HC_SubA_HTXnTB 0x0078 + */ +#define HC_HTXnTB_MASK 0x00f00000 +#define HC_HTXnFLSe_MASK 0x0000e000 +#define HC_HTXnFLSs_MASK 0x00001c00 +#define HC_HTXnFLTe_MASK 0x00000380 +#define HC_HTXnFLTs_MASK 0x00000070 +#define HC_HTXnFLDs_MASK 0x0000000f +#define HC_HTXnTB_NoTB 0x00000000 +#define HC_HTXnTB_TBC_S 0x00100000 +#define HC_HTXnTB_TBC_T 0x00200000 +#define HC_HTXnTB_TB_S 0x00400000 +#define HC_HTXnTB_TB_T 0x00800000 +#define HC_HTXnFLSe_Nearest 0x00000000 +#define HC_HTXnFLSe_Linear 0x00002000 +#define HC_HTXnFLSe_NonLinear 0x00004000 +#define HC_HTXnFLSe_Sharp 0x00008000 +#define HC_HTXnFLSe_Flat_Gaussian_Cubic 0x0000c000 +#define HC_HTXnFLSs_Nearest 0x00000000 +#define HC_HTXnFLSs_Linear 0x00000400 +#define HC_HTXnFLSs_NonLinear 0x00000800 +#define HC_HTXnFLSs_Flat_Gaussian_Cubic 0x00001800 +#define HC_HTXnFLTe_Nearest 0x00000000 +#define HC_HTXnFLTe_Linear 0x00000080 +#define HC_HTXnFLTe_NonLinear 0x00000100 +#define HC_HTXnFLTe_Sharp 0x00000180 +#define HC_HTXnFLTe_Flat_Gaussian_Cubic 0x00000300 +#define HC_HTXnFLTs_Nearest 0x00000000 +#define HC_HTXnFLTs_Linear 0x00000010 +#define HC_HTXnFLTs_NonLinear 0x00000020 +#define HC_HTXnFLTs_Flat_Gaussian_Cubic 0x00000060 +#define HC_HTXnFLDs_Tex0 0x00000000 +#define HC_HTXnFLDs_Nearest 0x00000001 +#define HC_HTXnFLDs_Linear 0x00000002 +#define HC_HTXnFLDs_NonLinear 0x00000003 +#define HC_HTXnFLDs_Dither 0x00000004 +#define HC_HTXnFLDs_ConstLOD 0x00000005 +#define HC_HTXnFLDs_Ani 0x00000006 +#define HC_HTXnFLDs_AniDither 0x00000007 +/* HC_SubA_HTXnMPMD 0x0079 + */ +#define HC_HTXnMPMD_SMASK 0x00070000 +#define HC_HTXnMPMD_TMASK 0x00380000 +#define HC_HTXnLODDTf_MASK 0x00000007 +#define HC_HTXnXY2ST_MASK 0x00000008 +#define HC_HTXnMPMD_Tsingle 0x00000000 +#define HC_HTXnMPMD_Tclamp 0x00080000 +#define HC_HTXnMPMD_Trepeat 0x00100000 +#define HC_HTXnMPMD_Tmirror 0x00180000 +#define HC_HTXnMPMD_Twrap 0x00200000 +#define HC_HTXnMPMD_Ssingle 0x00000000 +#define HC_HTXnMPMD_Sclamp 0x00010000 +#define HC_HTXnMPMD_Srepeat 0x00020000 +#define HC_HTXnMPMD_Smirror 0x00030000 +#define HC_HTXnMPMD_Swrap 0x00040000 +/* HC_SubA_HTXnCLODu 0x007a + */ +#define HC_HTXnCLODu_MASK 0x000ffc00 +#define HC_HTXnCLODd_MASK 0x000003ff +#define HC_HTXnCLODu_SHIFT 10 +/* HC_SubA_HTXnFM 0x007b + */ +#define HC_HTXnFM_MASK 0x00ff0000 +#define HC_HTXnLoc_MASK 0x00000003 +#define HC_HTXnFM_INDEX 0x00000000 +#define HC_HTXnFM_Intensity 0x00080000 +#define HC_HTXnFM_Lum 0x00100000 +#define HC_HTXnFM_Alpha 0x00180000 +#define HC_HTXnFM_DX 0x00280000 +#define HC_HTXnFM_YUV 0x00300000 +#define HC_HTXnFM_ARGB16 0x00880000 +#define HC_HTXnFM_ARGB32 0x00980000 +#define HC_HTXnFM_ABGR16 0x00a80000 +#define HC_HTXnFM_ABGR32 0x00b80000 +#define HC_HTXnFM_RGBA16 0x00c80000 +#define HC_HTXnFM_RGBA32 0x00d80000 +#define HC_HTXnFM_BGRA16 0x00e80000 +#define HC_HTXnFM_BGRA32 0x00f80000 +#define HC_HTXnFM_BUMPMAP 0x00380000 +#define HC_HTXnFM_Index1 (HC_HTXnFM_INDEX | 0x00000000) +#define HC_HTXnFM_Index2 (HC_HTXnFM_INDEX | 0x00010000) +#define HC_HTXnFM_Index4 (HC_HTXnFM_INDEX | 0x00020000) +#define HC_HTXnFM_Index8 (HC_HTXnFM_INDEX | 0x00030000) +#define HC_HTXnFM_T1 (HC_HTXnFM_Intensity | 0x00000000) +#define HC_HTXnFM_T2 (HC_HTXnFM_Intensity | 0x00010000) +#define HC_HTXnFM_T4 (HC_HTXnFM_Intensity | 0x00020000) +#define HC_HTXnFM_T8 (HC_HTXnFM_Intensity | 0x00030000) +#define HC_HTXnFM_L1 (HC_HTXnFM_Lum | 0x00000000) +#define HC_HTXnFM_L2 (HC_HTXnFM_Lum | 0x00010000) +#define HC_HTXnFM_L4 (HC_HTXnFM_Lum | 0x00020000) +#define HC_HTXnFM_L8 (HC_HTXnFM_Lum | 0x00030000) +#define HC_HTXnFM_AL44 (HC_HTXnFM_Lum | 0x00040000) +#define HC_HTXnFM_AL88 (HC_HTXnFM_Lum | 0x00050000) +#define HC_HTXnFM_A1 (HC_HTXnFM_Alpha | 0x00000000) +#define HC_HTXnFM_A2 (HC_HTXnFM_Alpha | 0x00010000) +#define HC_HTXnFM_A4 (HC_HTXnFM_Alpha | 0x00020000) +#define HC_HTXnFM_A8 (HC_HTXnFM_Alpha | 0x00030000) +#define HC_HTXnFM_DX1 (HC_HTXnFM_DX | 0x00010000) +#define HC_HTXnFM_DX23 (HC_HTXnFM_DX | 0x00020000) +#define HC_HTXnFM_DX45 (HC_HTXnFM_DX | 0x00030000) +/* YUV package mode */ +#define HC_HTXnFM_YUY2 (HC_HTXnFM_YUV | 0x00000000) +/* YUV planner mode */ +#define HC_HTXnFM_YV12 (HC_HTXnFM_YUV | 0x00040000) +/* YUV planner mode */ +#define HC_HTXnFM_IYUV (HC_HTXnFM_YUV | 0x00040000) +#define HC_HTXnFM_RGB555 (HC_HTXnFM_ARGB16 | 0x00000000) +#define HC_HTXnFM_RGB565 (HC_HTXnFM_ARGB16 | 0x00010000) +#define HC_HTXnFM_ARGB1555 (HC_HTXnFM_ARGB16 | 0x00020000) +#define HC_HTXnFM_ARGB4444 (HC_HTXnFM_ARGB16 | 0x00030000) +#define HC_HTXnFM_ARGB0888 (HC_HTXnFM_ARGB32 | 0x00000000) +#define HC_HTXnFM_ARGB8888 (HC_HTXnFM_ARGB32 | 0x00010000) +#define HC_HTXnFM_BGR555 (HC_HTXnFM_ABGR16 | 0x00000000) +#define HC_HTXnFM_BGR565 (HC_HTXnFM_ABGR16 | 0x00010000) +#define HC_HTXnFM_ABGR1555 (HC_HTXnFM_ABGR16 | 0x00020000) +#define HC_HTXnFM_ABGR4444 (HC_HTXnFM_ABGR16 | 0x00030000) +#define HC_HTXnFM_ABGR0888 (HC_HTXnFM_ABGR32 | 0x00000000) +#define HC_HTXnFM_ABGR8888 (HC_HTXnFM_ABGR32 | 0x00010000) +#define HC_HTXnFM_RGBA5550 (HC_HTXnFM_RGBA16 | 0x00000000) +#define HC_HTXnFM_RGBA5551 (HC_HTXnFM_RGBA16 | 0x00020000) +#define HC_HTXnFM_RGBA4444 (HC_HTXnFM_RGBA16 | 0x00030000) +#define HC_HTXnFM_RGBA8880 (HC_HTXnFM_RGBA32 | 0x00000000) +#define HC_HTXnFM_RGBA8888 (HC_HTXnFM_RGBA32 | 0x00010000) +#define HC_HTXnFM_BGRA5550 (HC_HTXnFM_BGRA16 | 0x00000000) +#define HC_HTXnFM_BGRA5551 (HC_HTXnFM_BGRA16 | 0x00020000) +#define HC_HTXnFM_BGRA4444 (HC_HTXnFM_BGRA16 | 0x00030000) +#define HC_HTXnFM_BGRA8880 (HC_HTXnFM_BGRA32 | 0x00000000) +#define HC_HTXnFM_BGRA8888 (HC_HTXnFM_BGRA32 | 0x00010000) +#define HC_HTXnFM_VU88 (HC_HTXnFM_BUMPMAP | 0x00000000) +#define HC_HTXnFM_LVU655 (HC_HTXnFM_BUMPMAP | 0x00010000) +#define HC_HTXnFM_LVU888 (HC_HTXnFM_BUMPMAP | 0x00020000) +#define HC_HTXnLoc_Local 0x00000000 +#define HC_HTXnLoc_Sys 0x00000002 +#define HC_HTXnLoc_AGP 0x00000003 + +/* Video Texture */ +#define HC_HTXnYUV2RGBMode_RGB 0x00000000 +#define HC_HTXnYUV2RGBMode_SDTV 0x00000001 +#define HC_HTXnYUV2RGBMode_HDTV 0x00000002 +#define HC_HTXnYUV2RGBMode_TABLE 0x00000003 + +/* HC_SubA_HTXnTRAH 0x007f + */ +#define HC_HTXnTRAH_MASK 0x00ff0000 +#define HC_HTXnTRAL_MASK 0x0000ff00 +#define HC_HTXnTBA_MASK 0x000000ff +#define HC_HTXnTRAH_SHIFT 16 +#define HC_HTXnTRAL_SHIFT 8 +/* HC_SubA_HTXnTBLCsat 0x0080 + *-- Define the input texture. + */ +#define HC_XTC_TOPC 0x00000000 +#define HC_XTC_InvTOPC 0x00000010 +#define HC_XTC_TOPCp5 0x00000020 +#define HC_XTC_Cbias 0x00000000 +#define HC_XTC_InvCbias 0x00000010 +#define HC_XTC_0 0x00000000 +#define HC_XTC_Dif 0x00000001 +#define HC_XTC_Spec 0x00000002 +#define HC_XTC_Tex 0x00000003 +#define HC_XTC_Cur 0x00000004 +#define HC_XTC_Adif 0x00000005 +#define HC_XTC_Fog 0x00000006 +#define HC_XTC_Atex 0x00000007 +#define HC_XTC_Acur 0x00000008 +#define HC_XTC_HTXnTBLRC 0x00000009 +#define HC_XTC_Ctexnext 0x0000000a +/*-- + */ +#define HC_HTXnTBLCsat_MASK 0x00800000 +#define HC_HTXnTBLCa_MASK 0x000fc000 +#define HC_HTXnTBLCb_MASK 0x00001f80 +#define HC_HTXnTBLCc_MASK 0x0000003f +#define HC_HTXnTBLCa_TOPC (HC_XTC_TOPC << 14) +#define HC_HTXnTBLCa_InvTOPC (HC_XTC_InvTOPC << 14) +#define HC_HTXnTBLCa_TOPCp5 (HC_XTC_TOPCp5 << 14) +#define HC_HTXnTBLCa_0 (HC_XTC_0 << 14) +#define HC_HTXnTBLCa_Dif (HC_XTC_Dif << 14) +#define HC_HTXnTBLCa_Spec (HC_XTC_Spec << 14) +#define HC_HTXnTBLCa_Tex (HC_XTC_Tex << 14) +#define HC_HTXnTBLCa_Cur (HC_XTC_Cur << 14) +#define HC_HTXnTBLCa_Adif (HC_XTC_Adif << 14) +#define HC_HTXnTBLCa_Fog (HC_XTC_Fog << 14) +#define HC_HTXnTBLCa_Atex (HC_XTC_Atex << 14) +#define HC_HTXnTBLCa_Acur (HC_XTC_Acur << 14) +#define HC_HTXnTBLCa_HTXnTBLRC (HC_XTC_HTXnTBLRC << 14) +#define HC_HTXnTBLCa_Ctexnext (HC_XTC_Ctexnext << 14) +#define HC_HTXnTBLCb_TOPC (HC_XTC_TOPC << 7) +#define HC_HTXnTBLCb_InvTOPC (HC_XTC_InvTOPC << 7) +#define HC_HTXnTBLCb_TOPCp5 (HC_XTC_TOPCp5 << 7) +#define HC_HTXnTBLCb_0 (HC_XTC_0 << 7) +#define HC_HTXnTBLCb_Dif (HC_XTC_Dif << 7) +#define HC_HTXnTBLCb_Spec (HC_XTC_Spec << 7) +#define HC_HTXnTBLCb_Tex (HC_XTC_Tex << 7) +#define HC_HTXnTBLCb_Cur (HC_XTC_Cur << 7) +#define HC_HTXnTBLCb_Adif (HC_XTC_Adif << 7) +#define HC_HTXnTBLCb_Fog (HC_XTC_Fog << 7) +#define HC_HTXnTBLCb_Atex (HC_XTC_Atex << 7) +#define HC_HTXnTBLCb_Acur (HC_XTC_Acur << 7) +#define HC_HTXnTBLCb_HTXnTBLRC (HC_XTC_HTXnTBLRC << 7) +#define HC_HTXnTBLCb_Ctexnext (HC_XTC_Ctexnext << 7) +#define HC_HTXnTBLCc_TOPC (HC_XTC_TOPC << 0) +#define HC_HTXnTBLCc_InvTOPC (HC_XTC_InvTOPC << 0) +#define HC_HTXnTBLCc_TOPCp5 (HC_XTC_TOPCp5 << 0) +#define HC_HTXnTBLCc_0 (HC_XTC_0 << 0) +#define HC_HTXnTBLCc_Dif (HC_XTC_Dif << 0) +#define HC_HTXnTBLCc_Spec (HC_XTC_Spec << 0) +#define HC_HTXnTBLCc_Tex (HC_XTC_Tex << 0) +#define HC_HTXnTBLCc_Cur (HC_XTC_Cur << 0) +#define HC_HTXnTBLCc_Adif (HC_XTC_Adif << 0) +#define HC_HTXnTBLCc_Fog (HC_XTC_Fog << 0) +#define HC_HTXnTBLCc_Atex (HC_XTC_Atex << 0) +#define HC_HTXnTBLCc_Acur (HC_XTC_Acur << 0) +#define HC_HTXnTBLCc_HTXnTBLRC (HC_XTC_HTXnTBLRC << 0) +#define HC_HTXnTBLCc_Ctexnext (HC_XTC_Ctexnext << 0) +/* HC_SubA_HTXnTBLCop 0x0081 + */ +#define HC_HTXnTBLdot_MASK 0x00c00000 +#define HC_HTXnTBLCop_MASK 0x00380000 +#define HC_HTXnTBLCbias_MASK 0x0007c000 +#define HC_HTXnTBLCshift_MASK 0x00001800 +#define HC_HTXnTBLAop_MASK 0x00000380 +#define HC_HTXnTBLAbias_MASK 0x00000078 +#define HC_HTXnTBLAshift_MASK 0x00000003 +#define HC_HTXnTBLCop_Add 0x00000000 +#define HC_HTXnTBLCop_Sub 0x00080000 +#define HC_HTXnTBLCop_Min 0x00100000 +#define HC_HTXnTBLCop_Max 0x00180000 +#define HC_HTXnTBLCop_Mask 0x00200000 +#define HC_HTXnTBLCbias_Cbias (HC_XTC_Cbias << 14) +#define HC_HTXnTBLCbias_InvCbias (HC_XTC_InvCbias << 14) +#define HC_HTXnTBLCbias_0 (HC_XTC_0 << 14) +#define HC_HTXnTBLCbias_Dif (HC_XTC_Dif << 14) +#define HC_HTXnTBLCbias_Spec (HC_XTC_Spec << 14) +#define HC_HTXnTBLCbias_Tex (HC_XTC_Tex << 14) +#define HC_HTXnTBLCbias_Cur (HC_XTC_Cur << 14) +#define HC_HTXnTBLCbias_Adif (HC_XTC_Adif << 14) +#define HC_HTXnTBLCbias_Fog (HC_XTC_Fog << 14) +#define HC_HTXnTBLCbias_Atex (HC_XTC_Atex << 14) +#define HC_HTXnTBLCbias_Acur (HC_XTC_Acur << 14) +#define HC_HTXnTBLCbias_HTXnTBLRC (HC_XTC_HTXnTBLRC << 14) +#define HC_HTXnTBLCshift_1 0x00000000 +#define HC_HTXnTBLCshift_2 0x00000800 +#define HC_HTXnTBLCshift_No 0x00001000 +#define HC_HTXnTBLCshift_DotP 0x00001800 +/*=* John Sheng [2003.7.18] texture combine *=*/ +#define HC_HTXnTBLDOT3 0x00080000 +#define HC_HTXnTBLDOT4 0x000C0000 + +#define HC_HTXnTBLAop_Add 0x00000000 +#define HC_HTXnTBLAop_Sub 0x00000080 +#define HC_HTXnTBLAop_Min 0x00000100 +#define HC_HTXnTBLAop_Max 0x00000180 +#define HC_HTXnTBLAop_Mask 0x00000200 +#define HC_HTXnTBLAbias_Inv 0x00000040 +#define HC_HTXnTBLAbias_Adif 0x00000000 +#define HC_HTXnTBLAbias_Fog 0x00000008 +#define HC_HTXnTBLAbias_Acur 0x00000010 +#define HC_HTXnTBLAbias_HTXnTBLRAbias 0x00000018 +#define HC_HTXnTBLAbias_Atex 0x00000020 +#define HC_HTXnTBLAshift_1 0x00000000 +#define HC_HTXnTBLAshift_2 0x00000001 +#define HC_HTXnTBLAshift_No 0x00000002 +/* #define HC_HTXnTBLAshift_DotP 0x00000003 */ +/* HC_SubA_HTXnTBLMPFog 0x0082 + */ +#define HC_HTXnTBLMPfog_MASK 0x00e00000 +#define HC_HTXnTBLMPfog_0 0x00000000 +#define HC_HTXnTBLMPfog_Adif 0x00200000 +#define HC_HTXnTBLMPfog_Fog 0x00400000 +#define HC_HTXnTBLMPfog_Atex 0x00600000 +#define HC_HTXnTBLMPfog_Acur 0x00800000 +#define HC_HTXnTBLMPfog_GHTXnTBLRFog 0x00a00000 +/* HC_SubA_HTXnTBLAsat 0x0083 + *-- Define the texture alpha input. + */ +#define HC_XTA_TOPA 0x00000000 +#define HC_XTA_InvTOPA 0x00000008 +#define HC_XTA_TOPAp5 0x00000010 +#define HC_XTA_Adif 0x00000000 +#define HC_XTA_Fog 0x00000001 +#define HC_XTA_Acur 0x00000002 +#define HC_XTA_HTXnTBLRA 0x00000003 +#define HC_XTA_Atex 0x00000004 +#define HC_XTA_Atexnext 0x00000005 +/*-- + */ +#define HC_HTXnTBLAsat_MASK 0x00800000 +#define HC_HTXnTBLAMB_MASK 0x00700000 +#define HC_HTXnTBLAa_MASK 0x0007c000 +#define HC_HTXnTBLAb_MASK 0x00000f80 +#define HC_HTXnTBLAc_MASK 0x0000001f +#define HC_HTXnTBLAMB_SHIFT 20 +#define HC_HTXnTBLAa_TOPA (HC_XTA_TOPA << 14) +#define HC_HTXnTBLAa_InvTOPA (HC_XTA_InvTOPA << 14) +#define HC_HTXnTBLAa_TOPAp5 (HC_XTA_TOPAp5 << 14) +#define HC_HTXnTBLAa_Adif (HC_XTA_Adif << 14) +#define HC_HTXnTBLAa_Fog (HC_XTA_Fog << 14) +#define HC_HTXnTBLAa_Acur (HC_XTA_Acur << 14) +#define HC_HTXnTBLAa_HTXnTBLRA (HC_XTA_HTXnTBLRA << 14) +#define HC_HTXnTBLAa_Atex (HC_XTA_Atex << 14) +#define HC_HTXnTBLAa_Atexnext (HC_XTA_Atexnext << 14) +#define HC_HTXnTBLAb_TOPA (HC_XTA_TOPA << 7) +#define HC_HTXnTBLAb_InvTOPA (HC_XTA_InvTOPA << 7) +#define HC_HTXnTBLAb_TOPAp5 (HC_XTA_TOPAp5 << 7) +#define HC_HTXnTBLAb_Adif (HC_XTA_Adif << 7) +#define HC_HTXnTBLAb_Fog (HC_XTA_Fog << 7) +#define HC_HTXnTBLAb_Acur (HC_XTA_Acur << 7) +#define HC_HTXnTBLAb_HTXnTBLRA (HC_XTA_HTXnTBLRA << 7) +#define HC_HTXnTBLAb_Atex (HC_XTA_Atex << 7) +#define HC_HTXnTBLAb_Atexnext (HC_XTA_Atexnext << 7) +#define HC_HTXnTBLAc_TOPA (HC_XTA_TOPA << 0) +#define HC_HTXnTBLAc_InvTOPA (HC_XTA_InvTOPA << 0) +#define HC_HTXnTBLAc_TOPAp5 (HC_XTA_TOPAp5 << 0) +#define HC_HTXnTBLAc_Adif (HC_XTA_Adif << 0) +#define HC_HTXnTBLAc_Fog (HC_XTA_Fog << 0) +#define HC_HTXnTBLAc_Acur (HC_XTA_Acur << 0) +#define HC_HTXnTBLAc_HTXnTBLRA (HC_XTA_HTXnTBLRA << 0) +#define HC_HTXnTBLAc_Atex (HC_XTA_Atex << 0) +#define HC_HTXnTBLAc_Atexnext (HC_XTA_Atexnext << 0) +/* HC_SubA_HTXnTBLRAa 0x0089 + */ +#define HC_HTXnTBLRAa_MASK 0x00ff0000 +#define HC_HTXnTBLRAb_MASK 0x0000ff00 +#define HC_HTXnTBLRAc_MASK 0x000000ff +#define HC_HTXnTBLRAa_SHIFT 16 +#define HC_HTXnTBLRAb_SHIFT 8 +#define HC_HTXnTBLRAc_SHIFT 0 +/* HC_SubA_HTXnTBLRFog 0x008a + */ +#define HC_HTXnTBLRFog_MASK 0x0000ff00 +#define HC_HTXnTBLRAbias_MASK 0x000000ff +#define HC_HTXnTBLRFog_SHIFT 8 +#define HC_HTXnTBLRAbias_SHIFT 0 +/* HC_SubA_HTXnLScale 0x0094 + */ +#define HC_HTXnLScale_MASK 0x0007fc00 +#define HC_HTXnLOff_MASK 0x000001ff +#define HC_HTXnLScale_SHIFT 10 +/* HC_SubA_HTXSMD 0x0000 + */ +#define HC_HTXSMD_MASK 0x00000080 +#define HC_HTXTMD_MASK 0x00000040 +#define HC_HTXNum_MASK 0x00000038 +#define HC_HTXTRMD_MASK 0x00000006 +#define HC_HTXCHCLR_MASK 0x00000001 +#define HC_HTXNum_SHIFT 3 + +/* Texture Palette n + */ +#define HC_SubType_TexPalette0 0x00000000 +#define HC_SubType_TexPalette1 0x00000001 +#define HC_SubType_FogTable 0x00000010 +#define HC_SubType_Stipple 0x00000014 +/* HC_SubA_TexPalette0 0x0000 + */ +#define HC_HTPnA_MASK 0xff000000 +#define HC_HTPnR_MASK 0x00ff0000 +#define HC_HTPnG_MASK 0x0000ff00 +#define HC_HTPnB_MASK 0x000000ff +/* HC_SubA_FogTable 0x0010 + */ +#define HC_HFPn3_MASK 0xff000000 +#define HC_HFPn2_MASK 0x00ff0000 +#define HC_HFPn1_MASK 0x0000ff00 +#define HC_HFPn_MASK 0x000000ff +#define HC_HFPn3_SHIFT 24 +#define HC_HFPn2_SHIFT 16 +#define HC_HFPn1_SHIFT 8 + +/* Auto Testing & Security + */ +#define HC_SubA_HenFIFOAT 0x0000 +#define HC_SubA_HFBDrawFirst 0x0004 +#define HC_SubA_HFBBasL 0x0005 +#define HC_SubA_HFBDst 0x0006 +/* HC_SubA_HenFIFOAT 0x0000 + */ +#define HC_HenFIFOAT_MASK 0x00000020 +#define HC_HenGEMILock_MASK 0x00000010 +#define HC_HenFBASwap_MASK 0x00000008 +#define HC_HenOT_MASK 0x00000004 +#define HC_HenCMDQ_MASK 0x00000002 +#define HC_HenTXCTSU_MASK 0x00000001 +/* HC_SubA_HFBDrawFirst 0x0004 + */ +#define HC_HFBDrawFirst_MASK 0x00000800 +#define HC_HFBQueue_MASK 0x00000400 +#define HC_HFBLock_MASK 0x00000200 +#define HC_HEOF_MASK 0x00000100 +#define HC_HFBBasH_MASK 0x000000ff + +/* GEMI Setting + */ +#define HC_SubA_HTArbRCM 0x0008 +#define HC_SubA_HTArbRZ 0x000a +#define HC_SubA_HTArbWZ 0x000b +#define HC_SubA_HTArbRTX 0x000c +#define HC_SubA_HTArbRCW 0x000d +#define HC_SubA_HTArbE2 0x000e +#define HC_SubA_HArbRQCM 0x0010 +#define HC_SubA_HArbWQCM 0x0011 +#define HC_SubA_HGEMITout 0x0020 +#define HC_SubA_HFthRTXD 0x0040 +#define HC_SubA_HFthRTXA 0x0044 +#define HC_SubA_HCMDQstL 0x0050 +#define HC_SubA_HCMDQendL 0x0051 +#define HC_SubA_HCMDQLen 0x0052 +/* HC_SubA_HTArbRCM 0x0008 + */ +#define HC_HTArbRCM_MASK 0x0000ffff +/* HC_SubA_HTArbRZ 0x000a + */ +#define HC_HTArbRZ_MASK 0x0000ffff +/* HC_SubA_HTArbWZ 0x000b + */ +#define HC_HTArbWZ_MASK 0x0000ffff +/* HC_SubA_HTArbRTX 0x000c + */ +#define HC_HTArbRTX_MASK 0x0000ffff +/* HC_SubA_HTArbRCW 0x000d + */ +#define HC_HTArbRCW_MASK 0x0000ffff +/* HC_SubA_HTArbE2 0x000e + */ +#define HC_HTArbE2_MASK 0x0000ffff +/* HC_SubA_HArbRQCM 0x0010 + */ +#define HC_HTArbRQCM_MASK 0x0000ffff +/* HC_SubA_HArbWQCM 0x0011 + */ +#define HC_HArbWQCM_MASK 0x0000ffff +/* HC_SubA_HGEMITout 0x0020 + */ +#define HC_HGEMITout_MASK 0x000f0000 +#define HC_HNPArbZC_MASK 0x0000ffff +#define HC_HGEMITout_SHIFT 16 +/* HC_SubA_HFthRTXD 0x0040 + */ +#define HC_HFthRTXD_MASK 0x00ff0000 +#define HC_HFthRZD_MASK 0x0000ff00 +#define HC_HFthWZD_MASK 0x000000ff +#define HC_HFthRTXD_SHIFT 16 +#define HC_HFthRZD_SHIFT 8 +/* HC_SubA_HFthRTXA 0x0044 + */ +#define HC_HFthRTXA_MASK 0x000000ff + +/**************************************************************************** +** Define the Halcyon Internal register access constants. For simulator only. +****************************************************************************/ +#define HC_SIMA_HAGPBstL 0x0000 +#define HC_SIMA_HAGPBendL 0x0001 +#define HC_SIMA_HAGPCMNT 0x0002 +#define HC_SIMA_HAGPBpL 0x0003 +#define HC_SIMA_HAGPBpH 0x0004 +#define HC_SIMA_HClipTB 0x0005 +#define HC_SIMA_HClipLR 0x0006 +#define HC_SIMA_HFPClipTL 0x0007 +#define HC_SIMA_HFPClipBL 0x0008 +#define HC_SIMA_HFPClipLL 0x0009 +#define HC_SIMA_HFPClipRL 0x000a +#define HC_SIMA_HFPClipTBH 0x000b +#define HC_SIMA_HFPClipLRH 0x000c +#define HC_SIMA_HLP 0x000d +#define HC_SIMA_HLPRF 0x000e +#define HC_SIMA_HSolidCL 0x000f +#define HC_SIMA_HPixGC 0x0010 +#define HC_SIMA_HSPXYOS 0x0011 +#define HC_SIMA_HCmdA 0x0012 +#define HC_SIMA_HCmdB 0x0013 +#define HC_SIMA_HEnable 0x0014 +#define HC_SIMA_HZWBBasL 0x0015 +#define HC_SIMA_HZWBBasH 0x0016 +#define HC_SIMA_HZWBType 0x0017 +#define HC_SIMA_HZBiasL 0x0018 +#define HC_SIMA_HZWBend 0x0019 +#define HC_SIMA_HZWTMD 0x001a +#define HC_SIMA_HZWCDL 0x001b +#define HC_SIMA_HZWCTAGnum 0x001c +#define HC_SIMA_HZCYNum 0x001d +#define HC_SIMA_HZWCFire 0x001e +/* #define HC_SIMA_HSBBasL 0x001d */ +/* #define HC_SIMA_HSBBasH 0x001e */ +/* #define HC_SIMA_HSBFM 0x001f */ +#define HC_SIMA_HSTREF 0x0020 +#define HC_SIMA_HSTMD 0x0021 +#define HC_SIMA_HABBasL 0x0022 +#define HC_SIMA_HABBasH 0x0023 +#define HC_SIMA_HABFM 0x0024 +#define HC_SIMA_HATMD 0x0025 +#define HC_SIMA_HABLCsat 0x0026 +#define HC_SIMA_HABLCop 0x0027 +#define HC_SIMA_HABLAsat 0x0028 +#define HC_SIMA_HABLAop 0x0029 +#define HC_SIMA_HABLRCa 0x002a +#define HC_SIMA_HABLRFCa 0x002b +#define HC_SIMA_HABLRCbias 0x002c +#define HC_SIMA_HABLRCb 0x002d +#define HC_SIMA_HABLRFCb 0x002e +#define HC_SIMA_HABLRAa 0x002f +#define HC_SIMA_HABLRAb 0x0030 +#define HC_SIMA_HDBBasL 0x0031 +#define HC_SIMA_HDBBasH 0x0032 +#define HC_SIMA_HDBFM 0x0033 +#define HC_SIMA_HFBBMSKL 0x0034 +#define HC_SIMA_HROP 0x0035 +#define HC_SIMA_HFogLF 0x0036 +#define HC_SIMA_HFogCL 0x0037 +#define HC_SIMA_HFogCH 0x0038 +#define HC_SIMA_HFogStL 0x0039 +#define HC_SIMA_HFogStH 0x003a +#define HC_SIMA_HFogOOdMF 0x003b +#define HC_SIMA_HFogOOdEF 0x003c +#define HC_SIMA_HFogEndL 0x003d +#define HC_SIMA_HFogDenst 0x003e +/*---- start of texture 0 setting ---- + */ +#define HC_SIMA_HTX0L0BasL 0x0040 +#define HC_SIMA_HTX0L1BasL 0x0041 +#define HC_SIMA_HTX0L2BasL 0x0042 +#define HC_SIMA_HTX0L3BasL 0x0043 +#define HC_SIMA_HTX0L4BasL 0x0044 +#define HC_SIMA_HTX0L5BasL 0x0045 +#define HC_SIMA_HTX0L6BasL 0x0046 +#define HC_SIMA_HTX0L7BasL 0x0047 +#define HC_SIMA_HTX0L8BasL 0x0048 +#define HC_SIMA_HTX0L9BasL 0x0049 +#define HC_SIMA_HTX0LaBasL 0x004a +#define HC_SIMA_HTX0LbBasL 0x004b +#define HC_SIMA_HTX0LcBasL 0x004c +#define HC_SIMA_HTX0LdBasL 0x004d +#define HC_SIMA_HTX0LeBasL 0x004e +#define HC_SIMA_HTX0LfBasL 0x004f +#define HC_SIMA_HTX0L10BasL 0x0050 +#define HC_SIMA_HTX0L11BasL 0x0051 +#define HC_SIMA_HTX0L012BasH 0x0052 +#define HC_SIMA_HTX0L345BasH 0x0053 +#define HC_SIMA_HTX0L678BasH 0x0054 +#define HC_SIMA_HTX0L9abBasH 0x0055 +#define HC_SIMA_HTX0LcdeBasH 0x0056 +#define HC_SIMA_HTX0Lf1011BasH 0x0057 +#define HC_SIMA_HTX0L0Pit 0x0058 +#define HC_SIMA_HTX0L1Pit 0x0059 +#define HC_SIMA_HTX0L2Pit 0x005a +#define HC_SIMA_HTX0L3Pit 0x005b +#define HC_SIMA_HTX0L4Pit 0x005c +#define HC_SIMA_HTX0L5Pit 0x005d +#define HC_SIMA_HTX0L6Pit 0x005e +#define HC_SIMA_HTX0L7Pit 0x005f +#define HC_SIMA_HTX0L8Pit 0x0060 +#define HC_SIMA_HTX0L9Pit 0x0061 +#define HC_SIMA_HTX0LaPit 0x0062 +#define HC_SIMA_HTX0LbPit 0x0063 +#define HC_SIMA_HTX0LcPit 0x0064 +#define HC_SIMA_HTX0LdPit 0x0065 +#define HC_SIMA_HTX0LePit 0x0066 +#define HC_SIMA_HTX0LfPit 0x0067 +#define HC_SIMA_HTX0L10Pit 0x0068 +#define HC_SIMA_HTX0L11Pit 0x0069 +#define HC_SIMA_HTX0L0_5WE 0x006a +#define HC_SIMA_HTX0L6_bWE 0x006b +#define HC_SIMA_HTX0Lc_11WE 0x006c +#define HC_SIMA_HTX0L0_5HE 0x006d +#define HC_SIMA_HTX0L6_bHE 0x006e +#define HC_SIMA_HTX0Lc_11HE 0x006f +#define HC_SIMA_HTX0L0OS 0x0070 +#define HC_SIMA_HTX0TB 0x0071 +#define HC_SIMA_HTX0MPMD 0x0072 +#define HC_SIMA_HTX0CLODu 0x0073 +#define HC_SIMA_HTX0FM 0x0074 +#define HC_SIMA_HTX0TRCH 0x0075 +#define HC_SIMA_HTX0TRCL 0x0076 +#define HC_SIMA_HTX0TBC 0x0077 +#define HC_SIMA_HTX0TRAH 0x0078 +#define HC_SIMA_HTX0TBLCsat 0x0079 +#define HC_SIMA_HTX0TBLCop 0x007a +#define HC_SIMA_HTX0TBLMPfog 0x007b +#define HC_SIMA_HTX0TBLAsat 0x007c +#define HC_SIMA_HTX0TBLRCa 0x007d +#define HC_SIMA_HTX0TBLRCb 0x007e +#define HC_SIMA_HTX0TBLRCc 0x007f +#define HC_SIMA_HTX0TBLRCbias 0x0080 +#define HC_SIMA_HTX0TBLRAa 0x0081 +#define HC_SIMA_HTX0TBLRFog 0x0082 +#define HC_SIMA_HTX0BumpM00 0x0083 +#define HC_SIMA_HTX0BumpM01 0x0084 +#define HC_SIMA_HTX0BumpM10 0x0085 +#define HC_SIMA_HTX0BumpM11 0x0086 +#define HC_SIMA_HTX0LScale 0x0087 +/*---- end of texture 0 setting ---- 0x008f + */ +#define HC_SIMA_TX0TX1_OFF 0x0050 +/*---- start of texture 1 setting ---- + */ +#define HC_SIMA_HTX1L0BasL \ + (HC_SIMA_HTX0L0BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L1BasL \ + (HC_SIMA_HTX0L1BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L2BasL \ + (HC_SIMA_HTX0L2BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L3BasL \ + (HC_SIMA_HTX0L3BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L4BasL (\ + HC_SIMA_HTX0L4BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L5BasL \ + (HC_SIMA_HTX0L5BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L6BasL \ + (HC_SIMA_HTX0L6BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L7BasL \ + (HC_SIMA_HTX0L7BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L8BasL \ + (HC_SIMA_HTX0L8BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L9BasL \ + (HC_SIMA_HTX0L9BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LaBasL \ + (HC_SIMA_HTX0LaBasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LbBasL \ + (HC_SIMA_HTX0LbBasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LcBasL \ + (HC_SIMA_HTX0LcBasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LdBasL \ + (HC_SIMA_HTX0LdBasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LeBasL \ + (HC_SIMA_HTX0LeBasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LfBasL \ + (HC_SIMA_HTX0LfBasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L10BasL \ + (HC_SIMA_HTX0L10BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L11BasL \ + (HC_SIMA_HTX0L11BasL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L012BasH \ + (HC_SIMA_HTX0L012BasH + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L345BasH \ + (HC_SIMA_HTX0L345BasH + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L678BasH \ + (HC_SIMA_HTX0L678BasH + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L9abBasH \ + (HC_SIMA_HTX0L9abBasH + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LcdeBasH \ + (HC_SIMA_HTX0LcdeBasH + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1Lf1011BasH \ + (HC_SIMA_HTX0Lf1011BasH + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L0Pit \ + (HC_SIMA_HTX0L0Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L1Pit \ + (HC_SIMA_HTX0L1Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L2Pit \ + (HC_SIMA_HTX0L2Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L3Pit \ + (HC_SIMA_HTX0L3Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L4Pit \ + (HC_SIMA_HTX0L4Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L5Pit \ + (HC_SIMA_HTX0L5Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L6Pit \ + (HC_SIMA_HTX0L6Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L7Pit \ + (HC_SIMA_HTX0L7Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L8Pit \ + (HC_SIMA_HTX0L8Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L9Pit \ + (HC_SIMA_HTX0L9Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LaPit \ + (HC_SIMA_HTX0LaPit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LbPit \ + (HC_SIMA_HTX0LbPit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LcPit \ + (HC_SIMA_HTX0LcPit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LdPit \ + (HC_SIMA_HTX0LdPit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LePit \ + (HC_SIMA_HTX0LePit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LfPit \ + (HC_SIMA_HTX0LfPit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L10Pit \ + (HC_SIMA_HTX0L10Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L11Pit \ + (HC_SIMA_HTX0L11Pit + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L0_5WE \ + (HC_SIMA_HTX0L0_5WE + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L6_bWE \ + (HC_SIMA_HTX0L6_bWE + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1Lc_11WE \ + (HC_SIMA_HTX0Lc_11WE + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L0_5HE \ + (HC_SIMA_HTX0L0_5HE + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L6_bHE \ + (HC_SIMA_HTX0L6_bHE + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1Lc_11HE \ + (HC_SIMA_HTX0Lc_11HE + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1L0OS \ + (HC_SIMA_HTX0L0OS + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TB \ + (HC_SIMA_HTX0TB + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1MPMD \ + (HC_SIMA_HTX0MPMD + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1CLODu \ + (HC_SIMA_HTX0CLODu + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1FM \ + (HC_SIMA_HTX0FM + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TRCH \ + (HC_SIMA_HTX0TRCH + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TRCL \ + (HC_SIMA_HTX0TRCL + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TBC \ + (HC_SIMA_HTX0TBC + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TRAH \ + (HC_SIMA_HTX0TRAH + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LTC \ + (HC_SIMA_HTX0LTC + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LTA \ + (HC_SIMA_HTX0LTA + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TBLCsat \ + (HC_SIMA_HTX0TBLCsat + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TBLCop \ + (HC_SIMA_HTX0TBLCop + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TBLMPfog \ + (HC_SIMA_HTX0TBLMPfog + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TBLAsat \ + (HC_SIMA_HTX0TBLAsat + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TBLRCa \ + (HC_SIMA_HTX0TBLRCa + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TBLRCb \ + (HC_SIMA_HTX0TBLRCb + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TBLRCc \ + (HC_SIMA_HTX0TBLRCc + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TBLRCbias \ + (HC_SIMA_HTX0TBLRCbias + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TBLRAa \ + (HC_SIMA_HTX0TBLRAa + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1TBLRFog \ + (HC_SIMA_HTX0TBLRFog + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1BumpM00 \ + (HC_SIMA_HTX0BumpM00 + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1BumpM01 \ + (HC_SIMA_HTX0BumpM01 + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1BumpM10 \ + (HC_SIMA_HTX0BumpM10 + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1BumpM11 \ + (HC_SIMA_HTX0BumpM11 + HC_SIMA_TX0TX1_OFF) +#define HC_SIMA_HTX1LScale \ + (HC_SIMA_HTX0LScale + HC_SIMA_TX0TX1_OFF) +/*---- end of texture 1 setting ---- 0xaf + */ +#define HC_SIMA_HTXSMD 0x00b0 +#define HC_SIMA_HenFIFOAT 0x00b1 +#define HC_SIMA_HFBDrawFirst 0x00b2 +#define HC_SIMA_HFBBasL 0x00b3 +#define HC_SIMA_HTArbRCM 0x00b4 +#define HC_SIMA_HTArbRZ 0x00b5 +#define HC_SIMA_HTArbWZ 0x00b6 +#define HC_SIMA_HTArbRTX 0x00b7 +#define HC_SIMA_HTArbRCW 0x00b8 +#define HC_SIMA_HTArbE2 0x00b9 +#define HC_SIMA_HGEMITout 0x00ba +#define HC_SIMA_HFthRTXD 0x00bb +#define HC_SIMA_HFthRTXA 0x00bc +/* Define the texture palette 0 + */ +#define HC_SIMA_HTP0 0x0100 +#define HC_SIMA_HTP1 0x0200 +#define HC_SIMA_FOGTABLE 0x0300 +#define HC_SIMA_STIPPLE 0x0400 +#define HC_SIMA_HE3Fire 0x0440 +#define HC_SIMA_TRANS_SET 0x0441 +#define HC_SIMA_HREngSt 0x0442 +#define HC_SIMA_HRFIFOempty 0x0443 +#define HC_SIMA_HRFIFOfull 0x0444 +#define HC_SIMA_HRErr 0x0445 +#define HC_SIMA_FIFOstatus 0x0446 + +/**************************************************************************** +** Define the AGP command header. +****************************************************************************/ +#define HC_ACMD_MASK 0xfe000000 +#define HC_ACMD_SUB_MASK 0x0c000000 +#define HC_ACMD_HCmdA 0xee000000 +#define HC_ACMD_HCmdB 0xec000000 +#define HC_ACMD_HCmdC 0xea000000 +#define HC_ACMD_H1 0xf0000000 +#define HC_ACMD_H2 0xf2000000 +#define HC_ACMD_H3 0xf4000000 +#define HC_ACMD_H4 0xf6000000 + +#define HC_ACMD_H1IO_MASK 0x000001ff +#define HC_ACMD_H2IO1_MASK 0x001ff000 +#define HC_ACMD_H2IO2_MASK 0x000001ff +#define HC_ACMD_H2IO1_SHIFT 12 +#define HC_ACMD_H2IO2_SHIFT 0 +#define HC_ACMD_H3IO_MASK 0x000001ff +#define HC_ACMD_H3COUNT_MASK 0x01fff000 +#define HC_ACMD_H3COUNT_SHIFT 12 +#define HC_ACMD_H4ID_MASK 0x000001ff +#define HC_ACMD_H4COUNT_MASK 0x01fffe00 +#define HC_ACMD_H4COUNT_SHIFT 9 + +/***************************************************************************** +** Define Header +*****************************************************************************/ +#define HC_HEADER2 0xF210F110 + +/***************************************************************************** +** Define Dummy Value +*****************************************************************************/ +#define HC_DUMMY 0xCCCCCCCC +/***************************************************************************** +** Define for DMA use +*****************************************************************************/ +#define HALCYON_HEADER2 0XF210F110 +#define HALCYON_FIRECMD 0XEE100000 +#define HALCYON_FIREMASK 0XFFF00000 +#define HALCYON_CMDB 0XEC000000 +#define HALCYON_CMDBMASK 0XFFFE0000 +#define HALCYON_SUB_ADDR0 0X00000000 +#define HALCYON_HEADER1MASK 0XFFFFFC00 +#define HALCYON_HEADER1 0XF0000000 +#define HC_SubA_HAGPBstL 0x0060 +#define HC_SubA_HAGPBendL 0x0061 +#define HC_SubA_HAGPCMNT 0x0062 +#define HC_SubA_HAGPBpL 0x0063 +#define HC_SubA_HAGPBpH 0x0064 +#define HC_HAGPCMNT_MASK 0x00800000 +#define HC_HCmdErrClr_MASK 0x00400000 +#define HC_HAGPBendH_MASK 0x0000ff00 +#define HC_HAGPBstH_MASK 0x000000ff +#define HC_HAGPBendH_SHIFT 8 +#define HC_HAGPBstH_SHIFT 0 +#define HC_HAGPBpL_MASK 0x00fffffc +#define HC_HAGPBpID_MASK 0x00000003 +#define HC_HAGPBpID_PAUSE 0x00000000 +#define HC_HAGPBpID_JUMP 0x00000001 +#define HC_HAGPBpID_STOP 0x00000002 +#define HC_HAGPBpH_MASK 0x00ffffff + + +#define VIA_VIDEO_HEADER5 0xFE040000 +#define VIA_VIDEO_HEADER6 0xFE050000 +#define VIA_VIDEO_HEADER7 0xFE060000 +#define VIA_VIDEOMASK 0xFFFF0000 + +/***************************************************************************** +** Define for H5 DMA use +*****************************************************************************/ +#define H5_HC_DUMMY 0xCC000000 + +/* Command Header Type */ +#define INV_DUMMY_MASK 0xFF000000 +#define INV_AGPHeader0 0xFE000000 +#define INV_AGPHeader1 0xFE010000 +#define INV_AGPHeader2 0xFE020000 +#define INV_AGPHeader3 0xFE030000 +#define INV_AGPHeader4 0xFE040000 +#define INV_AGPHeader5 0xFE050000 +#define INV_AGPHeader6 0xFE060000 +#define INV_AGPHeader7 0xFE070000 +#define INV_AGPHeader9 0xFE090000 +#define INV_AGPHeaderA 0xFE0A0000 +#define INV_AGPHeader40 0xFE400000 +#define INV_AGPHeader41 0xFE410000 +#define INV_AGPHeader43 0xFE430000 +#define INV_AGPHeader45 0xFE450000 +#define INV_AGPHeader47 0xFE470000 +#define INV_AGPHeader4A 0xFE4A0000 +#define INV_AGPHeader82 0xFE820000 +#define INV_AGPHeader83 0xFE830000 +#define INV_AGPHeader_MASK 0xFFFF0000 +#define INV_AGPHeader2A 0xFE2A0000 +#define INV_AGPHeader25 0xFE250000 +#define INV_AGPHeader20 0xFE200000 +#define INV_AGPHeader23 0xFE230000 +#define INV_AGPHeaderE2 0xFEE20000 +#define INV_AGPHeaderE3 0xFEE30000 + +/*Transmission IO Space*/ +#define INV_REG_CR_TRANS 0x041C +#define INV_REG_CR_BEGIN 0x0420 +#define INV_REG_CR_END 0x0438 + +#define INV_REG_3D_TRANS 0x043C +#define INV_REG_3D_BEGIN 0x0440 +#define INV_REG_3D_END 0x06FC + +#define INV_ParaType_CmdVdata 0x0000 + +/* H5 Enable Setting + */ +#define INV_HC_SubA_HEnable1 0x00 + +#define INV_HC_HenAT4ALLRT_MASK 0x00100000 +#define INV_HC_HenATMRT3_MASK 0x00080000 +#define INV_HC_HenATMRT2_MASK 0x00040000 +#define INV_HC_HenATMRT1_MASK 0x00020000 +#define INV_HC_HenATMRT0_MASK 0x00010000 +#define INV_HC_HenSCMRT3_MASK 0x00008000 +#define INV_HC_HenSCMRT2_MASK 0x00004000 +#define INV_HC_HenSCMRT1_MASK 0x00002000 +#define INV_HC_HenSCMRT0_MASK 0x00001000 +#define INV_HC_HenFOGMRT3_MASK 0x00000800 +#define INV_HC_HenFOGMRT2_MASK 0x00000400 +#define INV_HC_HenFOGMRT1_MASK 0x00000200 +#define INV_HC_HenFOGMRT0_MASK 0x00000100 +#define INV_HC_HenABLMRT3_MASK 0x00000080 +#define INV_HC_HenABLMRT2_MASK 0x00000040 +#define INV_HC_HenABLMRT1_MASK 0x00000020 +#define INV_HC_HenABLMRT0_MASK 0x00000010 +#define INV_HC_HenDTMRT3_MASK 0x00000008 +#define INV_HC_HenDTMRT2_MASK 0x00000004 +#define INV_HC_HenDTMRT1_MASK 0x00000002 +#define INV_HC_HenDTMRT0_MASK 0x00000001 + +#define INV_HC_SubA_HEnable2 0x01 + +#define INV_HC_HenLUL2DR_MASK 0x00800000 +#define INV_HC_HenLDIAMOND_MASK 0x00400000 +#define INV_HC_HenPSPRITE_MASK 0x00200000 +#define INV_HC_HenC2S_MASK 0x00100000 +#define INV_HC_HenFOGPP_MASK 0x00080000 +#define INV_HC_HenSCPP_MASK 0x00040000 +#define INV_HC_HenCPP_MASK 0x00020000 +#define INV_HC_HenCZ_MASK 0x00002000 +#define INV_HC_HenVC_MASK 0x00001000 +#define INV_HC_HenCL_MASK 0x00000800 +#define INV_HC_HenPS_MASK 0x00000400 +#define INV_HC_HenWCZ_MASK 0x00000200 +#define INV_HC_HenTXCH_MASK 0x00000100 +#define INV_HC_HenBFCULL_MASK 0x00000080 +#define INV_HC_HenCW_MASK 0x00000040 +#define INV_HC_HenAA_MASK 0x00000020 +#define INV_HC_HenST_MASK 0x00000010 +#define INV_HC_HenZT_MASK 0x00000008 +#define INV_HC_HenZW_MASK 0x00000004 +#define INV_HC_HenSP_MASK 0x00000002 +#define INV_HC_HenLP_MASK 0x00000001 + +/* H5 Miscellaneous Settings + */ +#define INV_HC_SubA_HCClipTL 0x0080 +#define INV_HC_SubA_HCClipBL 0x0081 +#define INV_HC_SubA_HSClipTL 0x0082 +#define INV_HC_SubA_HSClipBL 0x0083 +#define INV_HC_SubA_HSolidCL 0x0086 +#define INV_HC_SubA_HSolidCH 0x0087 +#define INV_HC_SubA_HGBClipGL 0x0088 +#define INV_HC_SubA_HGBClipGR 0x0089 + + +#define INV_HC_ParaType_Vetex 0x00040000 + +#endif -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 02/28] drm/via: Add via_crtc_hw.h 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace 2022-06-24 20:26 ` [PATCH 01/28] drm/via: Add via_3d_reg.h Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 03/28] drm/via: Add via_disp_reg.h Kevin Brace ` (18 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_crtc_hw.h | 1048 +++++++++++++++++++++++++++++ 1 file changed, 1048 insertions(+) create mode 100644 drivers/gpu/drm/via/via_crtc_hw.h diff --git a/drivers/gpu/drm/via/via_crtc_hw.h b/drivers/gpu/drm/via/via_crtc_hw.h new file mode 100644 index 000000000000..9cce4fdcb33a --- /dev/null +++ b/drivers/gpu/drm/via/via_crtc_hw.h @@ -0,0 +1,1048 @@ +/* + * Copyright 2012 James Simmons. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * James Simmons <jsimmons@infradead.org> + */ + +#ifndef __CRTC_HW_H__ +#define __CRTC_HW_H__ + +#include <video/vga.h> + +#include <drm/drm_print.h> + + +/* To be used with via_dac_set_dpms_control inline function. */ +#define VIA_DAC_DPMS_ON 0x00 +#define VIA_DAC_DPMS_STANDBY 0x01 +#define VIA_DAC_DPMS_SUSPEND 0x02 +#define VIA_DAC_DPMS_OFF 0x03 + + +struct vga_regset { + u16 ioport; + u8 io_addr; + u8 start_bit; + u8 end_bit; +}; + +struct vga_registers { + unsigned int count; + struct vga_regset *regs; +}; + +/************************************************ + ***** Display Timing ***** + ************************************************/ + +struct crtc_timings { + struct vga_registers htotal; + struct vga_registers hdisplay; + struct vga_registers hblank_start; + struct vga_registers hblank_end; + struct vga_registers hsync_start; + struct vga_registers hsync_end; + struct vga_registers vtotal; + struct vga_registers vdisplay; + struct vga_registers vblank_start; + struct vga_registers vblank_end; + struct vga_registers vsync_start; + struct vga_registers vsync_end; +}; + +/* Write a value to misc register with a mask */ +static inline void svga_wmisc_mask(void __iomem *regbase, u8 data, u8 mask) +{ + vga_w(regbase, VGA_MIS_W, (data & mask) | (vga_r(regbase, VGA_MIS_R) & ~mask)); +} + +/* Write a value to a sequence register with a mask */ +static inline void svga_wseq_mask(void __iomem *regbase, u8 index, u8 data, u8 mask) +{ + vga_wseq(regbase, index, (data & mask) | (vga_rseq(regbase, index) & ~mask)); +} + +/* Write a value to a CRT register with a mask */ +static inline void svga_wcrt_mask(void __iomem *regbase, u8 index, u8 data, u8 mask) +{ + vga_wcrt(regbase, index, (data & mask) | (vga_rcrt(regbase, index) & ~mask)); +} + + +/*********************************************************************** + + VIA Technologies Chrome IGP Register Access Helper Functions + +***********************************************************************/ + +static inline void +via_iga1_set_palette_lut_resolution(void __iomem *regs, + bool palette_lut) +{ + /* Set the palette LUT resolution for IGA1. */ + /* 3C5.15[7] - IGA1 6 / 8 Bit LUT + * 0: 6-bit + * 1: 8-bit */ + svga_wseq_mask(regs, 0x15, palette_lut ? BIT(7) : 0x00, BIT(7)); + DRM_DEBUG_KMS("IGA1 Palette LUT Resolution: %s bit\n", + palette_lut ? "8" : "6"); +} + +static inline void +via_iga2_set_palette_lut_resolution(void __iomem *regs, + bool palette_lut) +{ + /* Set the palette LUT resolution for IGA2. */ + /* 3X5.6A[5] - IGA2 6 / 8 Bit LUT + * 0: 6-bit + * 1: 8-bit */ + svga_wcrt_mask(regs, 0x6a, palette_lut ? BIT(5) : 0x00, BIT(5)); + DRM_DEBUG_KMS("IGA2 Palette LUT Resolution: %s bit\n", + palette_lut ? "8" : "6"); +} + +static inline void +via_iga1_set_interlace_mode(void __iomem *regs, bool interlace_mode) +{ + svga_wcrt_mask(regs, 0x33, + interlace_mode ? BIT(6) : 0x00, BIT(6)); + DRM_DEBUG_KMS("IGA1 Interlace Mode: %s\n", + interlace_mode ? "On" : "Off"); +} + +static inline void +via_iga2_set_interlace_mode(void __iomem *regs, bool interlace_mode) +{ + svga_wcrt_mask(regs, 0x67, + interlace_mode ? BIT(5) : 0x00, BIT(5)); + DRM_DEBUG_KMS("IGA2 Interlace Mode: %s\n", + interlace_mode ? "On" : "Off"); +} + +/* + * Sets IGA1's HSYNC Shift value. + */ +static inline void +via_iga1_set_hsync_shift(void __iomem *regs, u8 shift_value) +{ + /* 3X5.33[2:0] - IGA1 HSYNC Shift */ + svga_wcrt_mask(regs, 0x33, shift_value, BIT(2) | BIT(1) | BIT(0)); + DRM_DEBUG_KMS("IGA1 HSYNC Shift: %u\n", + (shift_value & 0x07)); +} + +/* + * Sets DVP0 (Digital Video Port 0) I/O pad state. + */ +static inline void +via_dvp0_set_io_pad_state(void __iomem *regs, u8 io_pad_state) +{ + /* 3C5.1E[7:6] - DVP0 Power Control + * 0x: Pad always off + * 10: Depend on the other control signal + * 11: Pad on/off according to the + * Power Management Status (PMS) */ + svga_wseq_mask(regs, 0x1E, io_pad_state << 6, BIT(7) | BIT(6)); + DRM_DEBUG_KMS("DVP0 I/O Pad State: %s\n", + ((io_pad_state & (BIT(1) | BIT(0))) == 0x03) ? "On" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x02) ? "Conditional" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x01) ? "Off" : + "Off"); +} + +/* + * Sets DVP0 (Digital Video Port 0) clock I/O pad drive strength. + */ +static inline void +via_dvp0_set_clock_drive_strength(void __iomem *regs, + u8 clock_drive_strength) +{ + /* 3C5.1E[2] - DVP0 Clock Drive Strength Bit [0] */ + svga_wseq_mask(regs, 0x1E, + clock_drive_strength << 2, BIT(2)); + + /* 3C5.2A[4] - DVP0 Clock Drive Strength Bit [1] */ + svga_wseq_mask(regs, 0x2A, + clock_drive_strength << 3, BIT(4)); + + DRM_DEBUG_KMS("DVP0 Clock I/O Pad Drive Strength: %lu\n", + clock_drive_strength & (BIT(1) | BIT(0))); +} + +/* + * Sets DVP0 (Digital Video Port 0) data I/O pads drive strength. + */ +static inline void +via_dvp0_set_data_drive_strength(void __iomem *regs, + u8 data_drive_strength) +{ + /* 3C5.1B[1] - DVP0 Data Drive Strength Bit [0] */ + svga_wseq_mask(regs, 0x1B, + data_drive_strength << 1, BIT(1)); + + /* 3C5.2A[5] - DVP0 Data Drive Strength Bit [1] */ + svga_wseq_mask(regs, 0x2A, + data_drive_strength << 4, BIT(5)); + + DRM_DEBUG_KMS("DVP0 Data I/O Pads Drive Strength: %lu\n", + data_drive_strength & (BIT(1) | BIT(0))); +} + +/* + * Sets the display source of DVP0 (Digital Video Port 0) interface. + */ +static inline void +via_dvp0_set_display_source(void __iomem *regs, u8 display_source) +{ + /* 3X5.96[4] - DVP0 Data Source Selection + * 0: Primary Display + * 1: Secondary Display */ + svga_wcrt_mask(regs, 0x96, display_source << 4, BIT(4)); + DRM_DEBUG_KMS("DVP0 Display Source: IGA%d\n", + (display_source & 0x01) + 1); +} + +/* + * Sets DVP1 (Digital Video Port 1) I/O pad state. + */ +static inline void +via_dvp1_set_io_pad_state(void __iomem *regs, u8 io_pad_state) +{ + /* 3C5.1E[5:4] - DVP1 Power Control + * 0x: Pad always off + * 10: Depend on the other control signal + * 11: Pad on/off according to the + * Power Management Status (PMS) */ + svga_wseq_mask(regs, 0x1E, io_pad_state << 4, BIT(5) | BIT(4)); + DRM_DEBUG_KMS("DVP1 I/O Pad State: %s\n", + ((io_pad_state & (BIT(1) | BIT(0))) == 0x03) ? "On" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x02) ? "Conditional" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x01) ? "Off" : + "Off"); +} + +/* + * Sets DVP1 (Digital Video Port 1) clock I/O pad drive strength. + */ +static inline void +via_dvp1_set_clock_drive_strength(void __iomem *regs, + u8 clock_drive_strength) +{ + /* 3C5.65[3:2] - DVP1 Clock Pads Driving Select [1:0] + * 00: lowest + * 01: low + * 10: high + * 11: highest */ + svga_wseq_mask(regs, 0x65, + clock_drive_strength << 2, BIT(3) | BIT(2)); + DRM_DEBUG_KMS("DVP1 Clock I/O Pad Drive Strength: %lu\n", + clock_drive_strength & (BIT(1) | BIT(0))); +} + +/* + * Sets DVP1 (Digital Video Port 1) data I/O pads drive strength. + */ +static inline void +via_dvp1_set_data_drive_strength(void __iomem *regs, + u8 data_drive_strength) +{ + /* 3C5.65[1:0] - DVP1 Data Pads Driving Select [1:0} + * 00: lowest + * 01: low + * 10: high + * 11: highest */ + svga_wseq_mask(regs, 0x65, + data_drive_strength, BIT(1) | BIT(0)); + DRM_DEBUG_KMS("DVP1 Data I/O Pads Drive Strength: %lu\n", + data_drive_strength & (BIT(1) | BIT(0))); +} + +/* + * Sets the display source of DVP1 (Digital Video Port 1) interface. + */ +static inline void +via_dvp1_set_display_source(void __iomem *regs, u8 display_source) +{ + /* 3X5.9B[4] - DVP1 Data Source Selection + * 0: Primary Display + * 1: Secondary Display */ + svga_wcrt_mask(regs, 0x9B, display_source << 4, BIT(4)); + DRM_DEBUG_KMS("DVP1 Display Source: IGA%d\n", + (display_source & 0x01) + 1); +} + +/* + * Sets analog (VGA) DAC power. + */ +static inline void via_dac_set_power(void __iomem *regs, bool output_state) +{ + /* 3X5.47[2] - DACOFF Backdoor Register + * 0: DAC on + * 1: DAC off */ + svga_wcrt_mask(regs, 0x47, + output_state ? 0x00 : BIT(2), BIT(2)); + DRM_DEBUG_KMS("Analog (VGA) Power: %s\n", + output_state ? "On" : "Off"); +} + +/* + * Sets analog (VGA) DPMS state. + */ +static inline void via_dac_set_dpms_control(void __iomem *regs, + u8 dpms_control) +{ + /* 3X5.36[5:4] - DPMS Control + * 00: On + * 01: Stand-by + * 10: Suspend + * 11: Off */ + svga_wcrt_mask(regs, 0x36, + dpms_control << 4, BIT(5) | BIT(4)); + DRM_DEBUG_KMS("Analog (VGA) DPMS: %s\n", + ((dpms_control & (BIT(1) | BIT(0))) == 0x03) ? + "Off" : + ((dpms_control & (BIT(1) | BIT(0))) == 0x02) ? + "Suspend" : + ((dpms_control & (BIT(1) | BIT(0))) == 0x01) ? + "Standby" : + "On"); +} + +/* + * Sets analog (VGA) sync polarity. + */ +static inline void via_dac_set_sync_polarity(void __iomem *regs, + u8 sync_polarity) +{ + /* 3C2[7] - Analog Vertical Sync Polarity + * 0: Positive + * 1: Negative + * 3C2[6] - Analog Horizontal Sync Polarity + * 0: Positive + * 1: Negative */ + svga_wmisc_mask(regs, + sync_polarity << 6, (BIT(1) | BIT(0)) << 6); + DRM_DEBUG_KMS("Analog (VGA) Horizontal Sync Polarity: %s\n", + (sync_polarity & BIT(0)) ? "-" : "+"); + DRM_DEBUG_KMS("Analog (VGA) Vertical Sync Polarity: %s\n", + (sync_polarity & BIT(1)) ? "-" : "+"); +} + +/* + * Sets analog (VGA) display source. + */ +static inline void via_dac_set_display_source(void __iomem *regs, + u8 display_source) +{ + /* 3C5.16[6] - CRT Display Source + * 0: Primary Display Stream (IGA1) + * 1: Secondary Display Stream (IGA2) */ + svga_wseq_mask(regs, 0x16, + display_source << 6, BIT(6)); + DRM_DEBUG_KMS("Analog (VGA) Display Source: IGA%d\n", + (display_source & 0x01) + 1); +} + +/* + * Sets KM400 or later chipset's FP primary power sequence control + * type. + */ +static inline void via_lvds_set_primary_power_seq_type(void __iomem *regs, + bool ctrl_type) +{ + /* 3X5.91[0] - FP Primary Power Sequence Control Type + * 0: Hardware Control + * 1: Software Control */ + svga_wcrt_mask(regs, 0x91, + ctrl_type ? 0x00 : BIT(0), BIT(0)); + DRM_DEBUG_KMS("FP Primary Power Sequence Control Type: " + "%s Control\n", + ctrl_type ? "Hardware" : "Software"); +} + +/* + * Sets KM400 or later chipset's FP primary software controlled + * back light. + */ +static inline void via_lvds_set_primary_soft_back_light(void __iomem *regs, + bool soft_on) +{ + /* 3X5.91[1] - FP Primary Software Back Light On + * 0: Off + * 1: On */ + svga_wcrt_mask(regs, 0x91, + soft_on ? BIT(1) : 0x00, BIT(1)); + DRM_DEBUG_KMS("FP Primary Software Controlled Back Light: " + "%s\n", soft_on ? "On" : "Off"); +} + +/* + * Sets KM400 or later chipset's FP primary software controlled + * VEE. + */ +static inline void via_lvds_set_primary_soft_vee(void __iomem *regs, + bool soft_on) +{ + /* 3X5.91[2] - FP Primary Software VEE On + * 0: Off + * 1: On */ + svga_wcrt_mask(regs, 0x91, + soft_on ? BIT(2) : 0x00, BIT(2)); + DRM_DEBUG_KMS("FP Primary Software Controlled VEE: %s\n", + soft_on ? "On" : "Off"); +} + +/* + * Sets KM400 or later chipset's FP primary software controlled + * data. + */ +static inline void via_lvds_set_primary_soft_data(void __iomem *regs, + bool soft_on) +{ + /* 3X5.91[3] - FP Primary Software Data On + * 0: Off + * 1: On */ + svga_wcrt_mask(regs, 0x91, + soft_on ? BIT(3) : 0x00, BIT(3)); + DRM_DEBUG_KMS("FP Primary Software Controlled Data: %s\n", + soft_on ? "On" : "Off"); +} + +/* + * Sets KM400 or later chipset's FP primary software controlled + * VDD. + */ +static inline void via_lvds_set_primary_soft_vdd(void __iomem *regs, + bool soft_on) +{ + /* 3X5.91[4] - FP Primary Software VDD On + * 0: Off + * 1: On */ + svga_wcrt_mask(regs, 0x91, + soft_on ? BIT(4) : 0x00, BIT(4)); + DRM_DEBUG_KMS("FP Primary Software Controlled VDD: %s\n", + soft_on ? "On" : "Off"); +} + +/* + * Sets KM400 or later chipset's FP primary direct back + * light control. + */ +static inline void via_lvds_set_primary_direct_back_light_ctrl( + void __iomem *regs, bool direct_on) +{ + /* 3X5.91[6] - FP Primary Direct Back Light Control + * 0: On + * 1: Off */ + svga_wcrt_mask(regs, 0x91, + direct_on ? 0x00 : BIT(6), BIT(6)); + DRM_DEBUG_KMS("FP Primary Direct Back Light Control: %s\n", + direct_on ? "On" : "Off"); +} + +/* + * Sets KM400 or later chipset's FP primary direct display + * period control. + */ +static inline void via_lvds_set_primary_direct_display_period( + void __iomem *regs, bool direct_on) +{ + /* 3X5.91[7] - FP Primary Direct Display Period Control + * 0: On + * 1: Off */ + svga_wcrt_mask(regs, 0x91, + direct_on ? 0x00 : BIT(7), BIT(7)); + DRM_DEBUG_KMS("FP Primary Direct Display Period Control: %s\n", + direct_on ? "On" : "Off"); +} + +/* + * Sets KM400 or later chipset's FP primary hardware controlled + * power sequence. + */ +static inline void via_lvds_set_primary_hard_power(void __iomem *regs, + bool power_state) +{ + /* 3X5.6A[3] - FP Primary Hardware Controlled Power Sequence + * 0: Hardware Controlled Power Off + * 1: Hardware Controlled Power On */ + svga_wcrt_mask(regs, 0x6A, + power_state ? BIT(3) : 0x00, BIT(3)); + DRM_DEBUG_KMS("FP Primary Hardware Controlled Power " + "Sequence: %s\n", power_state ? "On" : "Off"); +} + +/* + * Sets CX700 / VX700 or later chipset's FP secondary + * power sequence control type. + */ +static inline void via_lvds_set_secondary_power_seq_type(void __iomem *regs, + bool ctrl_type) +{ + /* 3X5.D3[0] - FP Secondary Power Sequence Control Type + * 0: Hardware Control + * 1: Software Control */ + svga_wcrt_mask(regs, 0xD3, + ctrl_type ? 0x00 : BIT(0), BIT(0)); + DRM_DEBUG_KMS("FP Secondary Power Sequence Control Type: " + "%s Control\n", + ctrl_type ? "Hardware" : "Software"); +} + +/* + * Sets CX700 / VX700 or later chipset's FP secondary + * software controlled back light. + */ +static inline void via_lvds_set_secondary_soft_back_light(void __iomem *regs, + bool soft_on) +{ + /* 3X5.D3[1] - FP Secondary Software Back Light On + * 0: Off + * 1: On */ + svga_wcrt_mask(regs, 0xD3, + soft_on ? BIT(1) : 0x00, BIT(1)); + DRM_DEBUG_KMS("FP Secondary Software Controlled Back Light: " + "%s\n", soft_on ? "On" : "Off"); +} + +/* + * Sets CX700 / VX700 or later chipset's FP secondary software + * controlled VEE. + */ +static inline void via_lvds_set_secondary_soft_vee(void __iomem *regs, + bool soft_on) +{ + /* 3X5.D3[2] - FP Secondary Software VEE On + * 0: Off + * 1: On */ + svga_wcrt_mask(regs, 0xD3, + soft_on ? BIT(2) : 0x00, BIT(2)); + DRM_DEBUG_KMS("FP Secondary Software Controlled VEE: %s\n", + soft_on ? "On" : "Off"); +} + +/* + * Sets CX700 / VX700 or later chipset's FP secondary software + * controlled data. + */ +static inline void via_lvds_set_secondary_soft_data(void __iomem *regs, + bool soft_on) +{ + /* 3X5.D3[3] - FP Secondary Software Data On + * 0: Off + * 1: On */ + svga_wcrt_mask(regs, 0xD3, + soft_on ? BIT(3) : 0x00, BIT(3)); + DRM_DEBUG_KMS("FP Secondary Software Controlled Data: %s\n", + soft_on ? "On" : "Off"); +} + +/* + * Sets CX700 / VX700 or later chipset's FP secondary software + * controlled VDD. + */ +static inline void via_lvds_set_secondary_soft_vdd(void __iomem *regs, + bool soft_on) +{ + /* 3X5.D3[4] - FP Secondary Software VDD On + * 0: Off + * 1: On */ + svga_wcrt_mask(regs, 0xD3, + soft_on ? BIT(4) : 0x00, BIT(4)); + DRM_DEBUG_KMS("FP Secondary Software Controlled VDD: %s\n", + soft_on ? "On" : "Off"); +} + +/* + * Sets CX700 / VX700 or later chipset's FP secondary direct back + * light control. + */ +static inline void via_lvds_set_secondary_direct_back_light_ctrl( + void __iomem *regs, bool direct_on) +{ + /* 3X5.D3[6] - FP Secondary Direct Back Light Control + * 0: On + * 1: Off */ + svga_wcrt_mask(regs, 0xD3, + direct_on ? 0x00 : BIT(6), BIT(6)); + DRM_DEBUG_KMS("FP Secondary Direct Back Light " + "Control: %s\n", direct_on ? "On" : "Off"); +} + +/* + * Sets CX700 / VX700 or later chipset's FP secondary direct + * display period control. + */ +static inline void via_lvds_set_secondary_direct_display_period( + void __iomem *regs, bool direct_on) +{ + /* 3X5.D3[7] - FP Secondary Direct Display Period Control + * 0: On + * 1: Off */ + svga_wcrt_mask(regs, 0xD3, + direct_on ? 0x00 : BIT(7), BIT(7)); + DRM_DEBUG_KMS("FP Secondary Direct Display Period " + "Control: %s\n", direct_on ? "On" : "Off"); +} + +/* + * Sets FP secondary hardware controlled power sequence enable. + */ +static inline void via_lvds_set_secondary_hard_power(void __iomem *regs, + bool power_state) +{ + /* 3X5.D4[1] - Secondary Power Hardware Power Sequence Enable + * 0: Off + * 1: On */ + svga_wcrt_mask(regs, 0xD4, + power_state ? BIT(1) : 0x00, BIT(1)); + DRM_DEBUG_KMS("FP Secondary Hardware Controlled Power " + "Sequence: %s\n", power_state ? "On" : "Off"); +} + +/* + * Sets FPDP (Flat Panel Display Port) Low I/O pad state. + */ +static inline void +via_fpdp_low_set_io_pad_state(void __iomem *regs, u8 io_pad_state) +{ + /* 3C5.2A[1:0] - FPDP Low I/O Pad Control + * 0x: Pad always off + * 10: Depend on the other control signal + * 11: Pad on/off according to the + * Power Management Status (PMS) */ + svga_wseq_mask(regs, 0x2A, + io_pad_state, BIT(1) | BIT(0)); + DRM_DEBUG_KMS("FPDP Low I/O Pad State: %s\n", + ((io_pad_state & (BIT(1) | BIT(0))) == 0x03) ? + "On" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x02) ? + "Conditional" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x01) ? + "Off" : + "Off"); +} + +/* + * Sets FPDP (Flat Panel Display Port) Low adjustment register. + */ +static inline void +via_fpdp_low_set_adjustment(void __iomem *regs, u8 adjustment) +{ + /* 3X5.99[3:0] - FPDP Low Adjustment */ + svga_wcrt_mask(regs, 0x99, + adjustment, BIT(3) | BIT(2) | BIT(1) | BIT(0)); + DRM_DEBUG_KMS("FPDP Low Adjustment: %lu\n", + (adjustment & (BIT(3) | BIT(2) | + BIT(1) | BIT(0)))); +} + +/* + * Sets FPDP (Flat Panel Display Port) Low interface display source. + */ +static inline void +via_fpdp_low_set_display_source(void __iomem *regs, u8 display_source) +{ + /* 3X5.99[4] - FPDP Low Data Source Selection + * 0: Primary Display + * 1: Secondary Display */ + svga_wcrt_mask(regs, 0x99, + display_source << 4, BIT(4)); + DRM_DEBUG_KMS("FPDP Low Display Source: IGA%d\n", + (display_source & 0x01) + 1); +} + +/* + * Sets FPDP (Flat Panel Display Port) High I/O pad state. + */ +static inline void +via_fpdp_high_set_io_pad_state(void __iomem *regs, u8 io_pad_state) +{ + /* 3C5.2A[3:2] - FPDP High I/O Pad Control + * 0x: Pad always off + * 10: Depend on the other control signal + * 11: Pad on/off according to the + * Power Management Status (PMS) */ + svga_wseq_mask(regs, 0x2A, + io_pad_state << 2, BIT(3) | BIT(2)); + DRM_DEBUG_KMS("FPDP High I/O Pad State: %s\n", + ((io_pad_state & (BIT(1) | BIT(0))) == 0x03) ? + "On" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x02) ? + "Conditional" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x01) ? + "Off" : + "Off"); +} + +/* + * Sets FPDP (Flat Panel Display Port) High adjustment register. + */ +static inline void +via_fpdp_high_set_adjustment(void __iomem *regs, u8 adjustment) +{ + /* 3X5.97[3:0] - FPDP High Adjustment */ + svga_wcrt_mask(regs, 0x97, + adjustment, BIT(3) | BIT(2) | BIT(1) | BIT(0)); + DRM_DEBUG_KMS("FPDP High Adjustment: %lu\n", + (adjustment & (BIT(3) | BIT(2) | + BIT(1) | BIT(0)))); +} + +/* + * Sets FPDP (Flat Panel Display Port) High interface display source. + */ +static inline void +via_fpdp_high_set_display_source(void __iomem *regs, u8 display_source) +{ + /* 3X5.97[4] - FPDP High Data Source Selection + * 0: Primary Display + * 1: Secondary Display */ + svga_wcrt_mask(regs, 0x97, + display_source << 4, BIT(4)); + DRM_DEBUG_KMS("FPDP High Display Source: IGA%d\n", + (display_source & 0x01) + 1); +} + +/* + * Sets CX700 / VX700 or later chipset's LVDS1 power state. + */ +static inline void +via_lvds1_set_power(void __iomem *regs, bool power_state) +{ + /* 3X5.D2[7] - Power Down (Active High) for Channel 1 LVDS + * 0: Power on + * 1: Power off */ + svga_wcrt_mask(regs, 0xD2, + power_state ? 0x00 : BIT(7), BIT(7)); + DRM_DEBUG_KMS("LVDS1 Power State: %s\n", + power_state ? "On" : "Off"); +} + +/* + * Sets CX700 or later single chipset's LVDS1 power sequence type. + */ +static inline void +via_lvds1_set_power_seq(void __iomem *regs, bool softCtrl) +{ + /* Set LVDS1 power sequence type. */ + /* 3X5.91[0] - LVDS1 Hardware or Software Control Power Sequence + * 0: Hardware Control + * 1: Software Control */ + svga_wcrt_mask(regs, 0x91, softCtrl ? BIT(0) : 0, BIT(0)); + DRM_DEBUG_KMS("LVDS1 Power Sequence: %s Control\n", + softCtrl ? "Software" : "Hardware"); +} + +/* + * Sets CX700 or later single chipset's LVDS1 software controlled + * data path state. + */ +static inline void +via_lvds1_set_soft_data(void __iomem *regs, bool softOn) +{ + /* Set LVDS1 software controlled data path state. */ + /* 3X5.91[3] - Software Data On + * 0: Off + * 1: On */ + svga_wcrt_mask(regs, 0x91, softOn ? BIT(3) : 0, BIT(3)); + DRM_DEBUG_KMS("LVDS1 Software Controlled Data Path: %s\n", + softOn ? "On" : "Off"); +} + +/* + * Sets CX700 or later single chipset's LVDS1 software controlled Vdd. + */ +static inline void +via_lvds1_set_soft_vdd(void __iomem *regs, bool softOn) +{ + /* Set LVDS1 software controlled Vdd. */ + /* 3X5.91[4] - Software VDD On + * 0: Off + * 1: On */ + svga_wcrt_mask(regs, 0x91, softOn ? BIT(4) : 0, BIT(4)); + DRM_DEBUG_KMS("LVDS1 Software Controlled Vdd: %s\n", + softOn ? "On" : "Off"); +} + +/* + * Sets CX700 or later single chipset's LVDS1 software controlled + * display period. + */ +static inline void +via_lvds1_set_soft_display_period(void __iomem *regs, bool softOn) +{ + /* Set LVDS1 software controlled display period state. */ + /* 3X5.91[7] - Software Direct On / Off Display Period + * in the Panel Path + * 0: On + * 1: Off */ + svga_wcrt_mask(regs, 0x91, softOn ? 0 : BIT(7), BIT(7)); + DRM_DEBUG_KMS("LVDS1 Software Controlled Display Period: %s\n", + softOn ? "On" : "Off"); +} + +/* + * Sets LVDS1 I/O pad state. + */ +static inline void +via_lvds1_set_io_pad_setting(void __iomem *regs, u8 io_pad_state) +{ + /* 3C5.2A[1:0] - LVDS1 I/O Pad Control + * 0x: Pad always off + * 10: Depend on the other control signal + * 11: Pad on/off according to the + * Power Management Status (PMS) */ + svga_wseq_mask(regs, 0x2A, + io_pad_state, BIT(1) | BIT(0)); + DRM_DEBUG_KMS("LVDS1 I/O Pad State: %s\n", + ((io_pad_state & (BIT(1) | BIT(0))) == 0x03) ? + "On" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x02) ? + "Conditional" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x01) ? + "Off" : + "Off"); +} + +/* + * Sets LVDS1 format. + */ +static inline void +via_lvds1_set_format(void __iomem *regs, u8 format) +{ + /* 3X5.D2[1] - LVDS Channel 1 Format Selection + * 0: SPWG Mode + * 1: OPENLDI Mode */ + svga_wcrt_mask(regs, 0xd2, + format << 1, BIT(1)); + DRM_DEBUG_KMS("LVDS1 Format: %s\n", + (format & BIT(0)) ? "OPENLDI" : "SPWG"); +} + +/* + * Sets LVDS1 output format (rotation or sequential mode). + */ +static inline void +via_lvds1_set_output_format(void __iomem *regs, u8 output_format) +{ + /* 3X5.88[6] - LVDS Channel 1 Output Format + * 0: Rotation + * 1: Sequential */ + svga_wcrt_mask(regs, 0x88, + output_format << 6, BIT(6)); + DRM_DEBUG_KMS("LVDS1 Output Format: %s\n", + (output_format & BIT(0)) ? + "Sequential" : "Rotation"); +} + +/* + * Sets LVDS1 output color dithering (18-bit color display vs. + * 24-bit color display). + */ +static inline void +via_lvds1_set_dithering(void __iomem *regs, bool dithering) +{ + /* 3X5.88[0] - LVDS Channel 1 Output Bits + * 0: 24 bits (dithering off) + * 1: 18 bits (dithering on) */ + svga_wcrt_mask(regs, 0x88, + dithering ? BIT(0) : 0x00, BIT(0)); + DRM_DEBUG_KMS("LVDS1 Color Dithering: %s\n", + dithering ? + "On (18 bit color)" : "Off (24 bit color)"); +} + +/* + * Sets LVDS1 display source. + */ +static inline void +via_lvds1_set_display_source(void __iomem *regs, u8 display_source) +{ + /* 3X5.99[4] - LVDS Channel 1 Data Source Selection + * 0: Primary Display + * 1: Secondary Display */ + svga_wcrt_mask(regs, 0x99, + display_source << 4, BIT(4)); + DRM_DEBUG_KMS("LVDS1 Display Source: IGA%d\n", + (display_source & 0x01) + 1); +} + +/* + * Sets CX700 / VX700 and VX800 chipset's LVDS2 power state. + */ +static inline void +via_lvds2_set_power(void __iomem *regs, bool power_state) +{ + /* 3X5.D2[6] - Power Down (Active High) for Channel 2 LVDS + * 0: Power on + * 1: Power off */ + svga_wcrt_mask(regs, 0xD2, + power_state ? 0x00 : BIT(6), BIT(6)); + DRM_DEBUG_KMS("LVDS2 Power State: %s\n", + power_state ? "On" : "Off"); +} + +/* + * Sets LVDS2 I/O pad state. + */ +static inline void +via_lvds2_set_io_pad_setting(void __iomem *regs, u8 io_pad_state) +{ + /* 3C5.2A[3:2] - LVDS2 I/O Pad Control + * 0x: Pad always off + * 10: Depend on the other control signal + * 11: Pad on/off according to the + * Power Management Status (PMS) */ + svga_wseq_mask(regs, 0x2A, + io_pad_state << 2, BIT(3) | BIT(2)); + DRM_DEBUG_KMS("LVDS2 I/O Pad State: %s\n", + ((io_pad_state & (BIT(1) | BIT(0))) == 0x03) ? + "On" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x02) ? + "Conditional" : + ((io_pad_state & (BIT(1) | BIT(0))) == 0x01) ? + "Off" : + "Off"); +} + +/* + * Sets LVDS2 format. + */ +static inline void +via_lvds2_set_format(void __iomem *regs, u8 format) +{ + /* 3X5.D2[0] - LVDS Channel 2 Format Selection + * 0: SPWG Mode + * 1: OPENLDI Mode */ + svga_wcrt_mask(regs, 0xd2, format, BIT(0)); + DRM_DEBUG_KMS("LVDS2 Format: %s\n", + (format & BIT(0)) ? "OPENLDI" : "SPWG"); +} + +/* + * Sets LVDS2 output format (rotation or sequential mode). + */ +static inline void +via_lvds2_set_output_format(void __iomem *regs, u8 output_format) +{ + /* 3X5.D4[7] - LVDS Channel 2 Output Format + * 0: Rotation + * 1: Sequential */ + svga_wcrt_mask(regs, 0xd4, output_format << 7, BIT(7)); + DRM_DEBUG_KMS("LVDS2 Output Format: %s\n", + (output_format & BIT(0)) ? + "Sequential" : "Rotation"); +} + +/* + * Sets LVDS2 output color dithering (18-bit color display vs. + * 24-bit color display). + */ +static inline void +via_lvds2_set_dithering(void __iomem *regs, bool dithering) +{ + /* 3X5.D4[6] - LVDS Channel 2 Output Bits + * 0: 24 bits (dithering off) + * 1: 18 bits (dithering on) */ + svga_wcrt_mask(regs, 0xd4, + dithering ? BIT(6) : 0x00, BIT(6)); + DRM_DEBUG_KMS("LVDS2 Color Dithering: %s\n", + dithering ? + "On (18 bit color)" : "Off (24 bit color)"); +} + +/* + * Sets LVDS2 display source. + */ +static inline void +via_lvds2_set_display_source(void __iomem *regs, u8 display_source) +{ + /* 3X5.97[4] - LVDS Channel 2 Data Source Selection + * 0: Primary Display + * 1: Secondary Display */ + svga_wcrt_mask(regs, 0x97, + display_source << 4, BIT(4)); + DRM_DEBUG_KMS("LVDS2 Display Source: IGA%d\n", + (display_source & 0x01) + 1); +} + +/* + * Sets CX700 / VX700 and VX800 chipsets' TMDS (DVI) power state. + */ +static inline void +via_tmds_set_power(void __iomem *regs, bool powerState) +{ + /* 3X5.D2[3] - Power Down (Active High) for DVI + * 0: TMDS power on + * 1: TMDS power down */ + svga_wcrt_mask(regs, 0xD2, + powerState ? 0x00 : BIT(3), BIT(3)); + DRM_DEBUG_KMS("TMDS (DVI) Power State: %s\n", + powerState ? "On" : "Off"); +} + +/* + * Sets CX700 / VX700 and VX800 chipsets' TMDS (DVI) sync polarity. + */ +static inline void +via_tmds_set_sync_polarity(void __iomem *regs, u8 syncPolarity) +{ + /* Set TMDS (DVI) sync polarity. */ + /* 3X5.97[6] - DVI (TMDS) VSYNC Polarity + * 0: Positive + * 1: Negative + * 3X5.97[5] - DVI (TMDS) HSYNC Polarity + * 0: Positive + * 1: Negative */ + svga_wcrt_mask(regs, 0x97, + syncPolarity << 5, BIT(6) | BIT(5)); + DRM_DEBUG_KMS("TMDS (DVI) Horizontal Sync Polarity: %s\n", + (syncPolarity & BIT(0)) ? "-" : "+"); + DRM_DEBUG_KMS("TMDS (DVI) Vertical Sync Polarity: %s\n", + (syncPolarity & BIT(1)) ? "-" : "+"); +} + +/* + * Sets TMDS (DVI) display source. + */ +static inline void +via_tmds_set_display_source(void __iomem *regs, u8 displaySource) +{ + /* The integrated TMDS transmitter appears to utilize LVDS1's + * data source selection bit (3X5.99[4]). */ + /* 3X5.99[4] - LVDS Channel1 Data Source Selection + * 0: Primary Display + * 1: Secondary Display */ + svga_wcrt_mask(regs, 0x99, + displaySource << 4, BIT(4)); + DRM_DEBUG_KMS("TMDS (DVI) Display Source: IGA%d\n", + (displaySource & 0x01) + 1); +} + + +void load_register_tables(void __iomem *regbase, struct vga_registers *regs); +void load_value_to_registers(void __iomem *regbase, struct vga_registers *regs, + unsigned int value); + +#endif /* __CRTC_HW_H__ */ -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 03/28] drm/via: Add via_disp_reg.h 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace 2022-06-24 20:26 ` [PATCH 01/28] drm/via: Add via_3d_reg.h Kevin Brace 2022-06-24 20:26 ` [PATCH 02/28] drm/via: Add via_crtc_hw.h Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 04/28] drm/via: Add via_drv.h Kevin Brace ` (17 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Likely originated from VIA Technologies. Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_disp_reg.h | 513 +++++++++++++++++++++++++++++ 1 file changed, 513 insertions(+) create mode 100644 drivers/gpu/drm/via/via_disp_reg.h diff --git a/drivers/gpu/drm/via/via_disp_reg.h b/drivers/gpu/drm/via/via_disp_reg.h new file mode 100644 index 000000000000..e2bd895bb495 --- /dev/null +++ b/drivers/gpu/drm/via/via_disp_reg.h @@ -0,0 +1,513 @@ +/* + * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2009 S3 Graphics, Inc. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#ifndef __VIA_DISP_REG_H__ +#define __VIA_DISP_REG_H__ + +/********************************************************/ +/* Definition IGA Design Method of FIFO Registers */ +/********************************************************/ +#define IGA1_FIFO_DEPTH_SELECT_FORMULA(x) ((x >> 1) - 1) +#define IGA2_FIFO_DEPTH_SELECT_FORMULA(x) ((x >> 3) - 1) + +/* Define Display OFFSET */ +/* VT3314 chipset */ +#define CN700_IGA1_FIFO_MAX_DEPTH 96 /* location: {SR17,0,7}*/ +#define CN700_IGA1_FIFO_THRESHOLD 80 /* location: {SR16,0,5},{SR16,7,7}*/ +#define CN700_IGA1_FIFO_HIGH_THRESHOLD 64 /* location: {SR18,0,5},{SR18,7,7}*/ +#define CN700_IGA1_DISPLAY_QUEUE_EXPIRE_NUM 128 /* location: {SR22,0,4}. (128/4) =64, + * P800 must be set zero, because HW + * only 5 bits */ +#define CN700_IGA2_FIFO_MAX_DEPTH 96 /* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/ +#define CN700_IGA2_FIFO_THRESHOLD 80 /* location: {CR68,0,3},{CR95,4,6}*/ +#define CN700_IGA2_FIFO_HIGH_THRESHOLD 32 /* location: {CR92,0,3},{CR95,0,2}*/ +#define CN700_IGA2_DISPLAY_QUEUE_EXPIRE_NUM 128 /* location: {CR94,0,6}*/ + +/* For VT3324, these values are suggested by HW */ +#define CX700_IGA1_FIFO_MAX_DEPTH 192 /* location: {SR17,0,7}*/ +#define CX700_IGA1_FIFO_THRESHOLD 128 /* location: {SR16,0,5},{SR16,7,7}*/ +#define CX700_IGA1_FIFO_HIGH_THRESHOLD 128 /* location: {SR18,0,5},{SR18,7,7} */ +#define CX700_IGA1_DISPLAY_QUEUE_EXPIRE_NUM 124 /* location: {SR22,0,4} */ + +#define CX700_IGA2_FIFO_MAX_DEPTH 96 /* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/ +#define CX700_IGA2_FIFO_THRESHOLD 64 /* location: {CR68,0,3},{CR95,4,6}*/ +#define CX700_IGA2_FIFO_HIGH_THRESHOLD 32 /* location: {CR92,0,3},{CR95,0,2} */ +#define CX700_IGA2_DISPLAY_QUEUE_EXPIRE_NUM 128 /* location: {CR94,0,6}*/ + +/* VT3336 chipset */ +#define K8M890_IGA1_FIFO_MAX_DEPTH 360 /* location: {SR17,0,7}*/ +#define K8M890_IGA1_FIFO_THRESHOLD 328 /* location: {SR16,0,5},{SR16,7,7}*/ +#define K8M890_IGA1_FIFO_HIGH_THRESHOLD 296 /* location: {SR18,0,5},{SR18,7,7}*/ +#define K8M890_IGA1_DISPLAY_QUEUE_EXPIRE_NUM 124 /* location: {SR22,0,4}.*/ + +#define K8M890_IGA2_FIFO_MAX_DEPTH 360 /* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/ +#define K8M890_IGA2_FIFO_THRESHOLD 328 /* location: {CR68,0,3},{CR95,4,6}*/ +#define K8M890_IGA2_FIFO_HIGH_THRESHOLD 296 /* location: {CR92,0,3},{CR95,0,2}*/ +#define K8M890_IGA2_DISPLAY_QUEUE_EXPIRE_NUM 124 /* location: {CR94,0,6}*/ + +/* VT3327 chipset */ +#define P4M890_IGA1_FIFO_MAX_DEPTH 96 /* location: {SR17,0,7}*/ +#define P4M890_IGA1_FIFO_THRESHOLD 76 /* location: {SR16,0,5},{SR16,7,7}*/ +#define P4M890_IGA1_FIFO_HIGH_THRESHOLD 64 /* location: {SR18,0,5},{SR18,7,7}*/ +#define P4M890_IGA1_DISPLAY_QUEUE_EXPIRE_NUM 32 /* location: {SR22,0,4}. (32/4) =8*/ + +#define P4M890_IGA2_FIFO_MAX_DEPTH 96 /* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/ +#define P4M890_IGA2_FIFO_THRESHOLD 76 /* location: {CR68,0,3},{CR95,4,6}*/ +#define P4M890_IGA2_FIFO_HIGH_THRESHOLD 64 /* location: {CR92,0,3},{CR95,0,2}*/ +#define P4M890_IGA2_DISPLAY_QUEUE_EXPIRE_NUM 32 /* location: {CR94,0,6}*/ + +/* VT3364 chipset */ +#define P4M900_IGA1_FIFO_MAX_DEPTH 96 /* location: {SR17,0,7}*/ +#define P4M900_IGA1_FIFO_THRESHOLD 76 /* location: {SR16,0,5},{SR16,7,7}*/ +#define P4M900_IGA1_FIFO_HIGH_THRESHOLD 76 /* location: {SR18,0,5},{SR18,7,7}*/ +#define P4M900_IGA1_DISPLAY_QUEUE_EXPIRE_NUM 32 /* location: {SR22,0,4}.*/ + +#define P4M900_IGA2_FIFO_MAX_DEPTH 96 /* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/ +#define P4M900_IGA2_FIFO_THRESHOLD 76 /* location: {CR68,0,3},{CR95,4,6}*/ +#define P4M900_IGA2_FIFO_HIGH_THRESHOLD 76 /* location: {CR92,0,3},{CR95,0,2}*/ +#define P4M900_IGA2_DISPLAY_QUEUE_EXPIRE_NUM 32 /* location: {CR94,0,6}*/ + +/* For VT3353, these values are suggested by HW */ +#define VX800_IGA1_FIFO_MAX_DEPTH 192 /* location: {SR17,0,7}*/ +#define VX800_IGA1_FIFO_THRESHOLD 152 /* location: {SR16,0,5},{SR16,7,7}*/ +#define VX800_IGA1_FIFO_HIGH_THRESHOLD 152 /* location: {SR18,0,5},{SR18,7,7} */ +#define VX800_IGA1_DISPLAY_QUEUE_EXPIRE_NUM 64 /* location: {SR22,0,4} */ + +#define VX800_IGA2_FIFO_MAX_DEPTH 96 /* location: {CR68,4,7},{CR94,7,7},{CR95,7,7}*/ +#define VX800_IGA2_FIFO_THRESHOLD 64 /* location: {CR68,0,3},{CR95,4,6}*/ +#define VX800_IGA2_FIFO_HIGH_THRESHOLD 32 /* location: {CR92,0,3},{CR95,0,2} */ +#define VX800_IGA2_DISPLAY_QUEUE_EXPIRE_NUM 128 /* location: {CR94,0,6}*/ + +/* For VT3409 */ +#define VX855_IGA1_FIFO_MAX_DEPTH 400 +#define VX855_IGA1_FIFO_THRESHOLD 320 +#define VX855_IGA1_FIFO_HIGH_THRESHOLD 320 +#define VX855_IGA1_DISPLAY_QUEUE_EXPIRE_NUM 160 + +#define VX855_IGA2_FIFO_MAX_DEPTH 200 +#define VX855_IGA2_FIFO_THRESHOLD 160 +#define VX855_IGA2_FIFO_HIGH_THRESHOLD 160 +#define VX855_IGA2_DISPLAY_QUEUE_EXPIRE_NUM 320 + +/* For VT3410 */ +#define VX900_IGA1_FIFO_MAX_DEPTH 400 +#define VX900_IGA1_FIFO_THRESHOLD 320 +#define VX900_IGA1_FIFO_HIGH_THRESHOLD 320 +#define VX900_IGA1_DISPLAY_QUEUE_EXPIRE_NUM 160 + +#define VX900_IGA2_FIFO_MAX_DEPTH 192 +#define VX900_IGA2_FIFO_THRESHOLD 160 +#define VX900_IGA2_FIFO_HIGH_THRESHOLD 160 +#define VX900_IGA2_DISPLAY_QUEUE_EXPIRE_NUM 320 + +#ifdef VIA_VT3293_SUPPORT +/* For VT3293 */ +#define CN750_IGA1_FIFO_MAX_DEPTH 96 +#define CN750_IGA1_FIFO_THRESHOLD 76 +#define CN750_IGA1_FIFO_HIGH_THRESHOLD 76 +#define CN750_IGA1_DISPLAY_QUEUE_EXPIRE_NUM 32 + +#define CN750_IGA2_FIFO_MAX_DEPTH 96 +#define CN750_IGA2_FIFO_THRESHOLD 76 +#define CN750_IGA2_FIFO_HIGH_THRESHOLD 76 +#define CN750_IGA2_DISPLAY_QUEUE_EXPIRE_NUM 32 +#endif + +/* CLE266 and KM400 IGA1 FIFO Depth Select */ +static struct vga_regset iga1_cle266_fifo_depth_select[] = { + { VGA_SEQ_I, 0x17, 0, 6 } +}; + +/* K8M800 or later IGA1 FIFO Depth Select */ +static struct vga_regset iga1_k8m800_fifo_depth_select[] = { + { VGA_SEQ_I, 0x17, 0, 7 } +}; + +/* CLE266 and KM400 IGA2 FIFO Depth_Select */ +static struct vga_regset iga2_cle266_fifo_depth_select[] = { + { VGA_CRT_IC, 0x68, 4, 7 } +}; + +/* K8M800 or later IGA2 FIFO Depth_Select */ +static struct vga_regset iga2_k8m800_fifo_depth_select[] = { + { VGA_CRT_IC, 0x68, 4, 7 }, + { VGA_CRT_IC, 0x94, 7, 7 }, + { VGA_CRT_IC, 0x95, 7, 7 } +}; + +/* CLE266 and KM400 IGA1 FIFO Threshold Select */ +static struct vga_regset iga1_cle266_fifo_threshold_select[] = { + { VGA_SEQ_I, 0x16, 0, 5 } +}; + +/* K8M800 or later IGA1 FIFO Threshold Select */ +static struct vga_regset iga1_k8m800_fifo_threshold_select[] = { + { VGA_SEQ_I, 0x16, 0, 5 }, + { VGA_SEQ_I, 0x16, 7, 7 } +}; + +/* CLE266 and KM400 IGA2 FIFO Threshold Select */ +static struct vga_regset iga2_cle266_fifo_threshold_select[] = { + { VGA_CRT_IC, 0x68, 0, 3 } +}; + +/* K8M800 or later IGA2 FIFO Threshold Select */ +static struct vga_regset iga2_k8m800_fifo_threshold_select[] = { + { VGA_CRT_IC, 0x68, 0, 3 }, + { VGA_CRT_IC, 0x95, 4, 6 } +}; + +/* CLE266 and KM400 IGA1 FIFO High Threshold Select */ +static struct vga_regset iga1_cle266_fifo_high_threshold_select[] = { + { VGA_SEQ_I, 0x18, 0, 5 } +}; + +/* K8M800 or later IGA1 FIFO High Threshold Select */ +static struct vga_regset iga1_k8m800_fifo_high_threshold_select[] = { + { VGA_SEQ_I, 0x18, 0, 5 }, + { VGA_SEQ_I, 0x18, 7, 7 } +}; + +/* IGA2 FIFO High Threshold Select */ +static struct vga_regset iga2_fifo_high_threshold_select[] = { + { VGA_CRT_IC, 0x92, 0, 3 }, + { VGA_CRT_IC, 0x95, 0, 2 } +}; + +/* CLE266 and KM400 IGA1 FIFO Display Queue Expire */ +static struct vga_regset iga1_cle266_display_queue_expire_num[] = { + { VGA_SEQ_I, 0x22, 0, 4 } +}; + +/* K8M800 and later IGA1 FIFO Display Queue Expire */ +static struct vga_regset iga1_k8m800_display_queue_expire_num[] = { + { VGA_SEQ_I, 0x22, 0, 4 } +}; + +/* IGA2 FIFO display queue expire */ +static struct vga_regset iga2_display_queue_expire_num[] = { + { VGA_CRT_IC, 0x94, 0, 6 } +}; + +/***********************************************/ +/************* Offset register *****************/ +/***********************************************/ + +/* IGA1 Offset Register */ +static struct vga_regset iga1_offset[] = { + { VGA_CRT_IC, 0x13, 0, 7 }, + { VGA_CRT_IC, 0x35, 5, 7 } +}; + +/* IGA2 Offset Register */ +static struct vga_regset iga2_offset[] = { + { VGA_CRT_IC, 0x66, 0, 7 }, + { VGA_CRT_IC, 0x67, 0, 1 }, + { VGA_CRT_IC, 0x71, 7, 7 } +}; + +/***********************************************/ +/*********** Fetch count register **************/ +/***********************************************/ + +/* IGA1 Fetch Count Register */ +static struct vga_regset iga1_fetch_count[] = { + { VGA_SEQ_I, 0x1C, 0, 7 }, + { VGA_SEQ_I, 0x1D, 0, 1 } +}; + +/* IGA2 Fetch Count Register */ +static struct vga_regset iga2_fetch_count[] = { + { VGA_CRT_IC, 0x65, 0, 7 }, + { VGA_CRT_IC, 0x67, 2, 3 } +}; + +/************************************************/ +/*********** IGA Scaling Factor Registers *******/ +/************************************************/ +#define LCD_HOR_SCALE_FACTOR_FORMULA(x, y) (((x - 1) * 4096) / (y - 1)) +#define LCD_VER_SCALE_FACTOR_FORMULA(x, y) (((x - 1) * 2048) / (y - 1)) + +static struct vga_regset lcd_hor_scaling[] = { + { VGA_CRT_IC, 0x9F, 0, 1 }, + { VGA_CRT_IC, 0x77, 0, 7 }, + { VGA_CRT_IC, 0x79, 4, 5 } +}; + +static struct vga_regset lcd_ver_scaling[] = { + { VGA_CRT_IC, 0x79, 3, 3 }, + { VGA_CRT_IC, 0x78, 0, 7 }, + { VGA_CRT_IC, 0x79, 6, 7 } +}; + +/***********************************************/ +/*********** CRTC timing register **************/ +/***********************************************/ + +/***************************************************/ +/* Definition IGA1 Design Method of CRTC Registers */ +/***************************************************/ +#define IGA1_HOR_TOTAL_FORMULA(x) (x / 8) - 5 +#define IGA1_HOR_ADDR_FORMULA(x) (x / 8) - 1 +#define IGA1_HOR_BLANK_START_FORMULA(x) (x / 8) - 1 +#define IGA1_HOR_BLANK_END_FORMULA(x) (x / 8) - 1 +#define IGA1_HOR_SYNC_START_FORMULA(x) (x / 8) - 1 +#define IGA1_HOR_SYNC_END_FORMULA(x) (x / 8) - 1 + +#define IGA1_VER_TOTAL_FORMULA(x) (x - 2) +#define IGA1_VER_ADDR_FORMULA(x) (x - 1) +#define IGA1_VER_BLANK_START_FORMULA(x) (x - 1) +#define IGA1_VER_BLANK_END_FORMULA(x) (x - 1) +#define IGA1_VER_SYNC_START_FORMULA(x) (x - 1) +#define IGA1_VER_SYNC_END_FORMULA(x) (x - 1) + +/***************************************************/ +/* Definition IGA2 Design Method of CRTC Registers */ +/***************************************************/ +#define IGA2_HOR_TOTAL_FORMULA(x) (x - 1) +#define IGA2_HOR_ADDR_FORMULA(x) (x - 1) +#define IGA2_HOR_BLANK_START_FORMULA(x) (x - 1) +#define IGA2_HOR_BLANK_END_FORMULA(x) (x - 1) +#define IGA2_HOR_SYNC_START_FORMULA(x) (x - 1) +#define IGA2_HOR_SYNC_END_FORMULA(x) (x - 1) + +#define IGA2_VER_TOTAL_FORMULA(x) (x - 1) +#define IGA2_VER_ADDR_FORMULA(x) (x - 1) +#define IGA2_VER_BLANK_START_FORMULA(x) (x - 1) +#define IGA2_VER_BLANK_END_FORMULA(x) (x - 1) +#define IGA2_VER_SYNC_START_FORMULA(x) (x - 1) +#define IGA2_VER_SYNC_END_FORMULA(x) (x - 1) + +/****************************************************************/ +/* Definition IGA1 Design Method of CRTC Pixel timing Registers */ +/****************************************************************/ +#define IGA1_PIXELTIMING_HOR_TOTAL_FORMULA(x) (x - 1) +#define IGA1_PIXELTIMING_HOR_ADDR_FORMULA(x) (x - 1) +#define IGA1_PIXELTIMING_HOR_BLANK_START_FORMULA(x) (x - 1) +#define IGA1_PIXELTIMING_HOR_BLANK_END_FORMULA(x) (x - 1) +#define IGA1_PIXELTIMING_HOR_SYNC_START_FORMULA(x) (x - 1) +#define IGA1_PIXELTIMING_HOR_SYNC_END_FORMULA(x) (x - 1) + +#define IGA1_PIXELTIMING_VER_TOTAL_FORMULA(x) (x - 2) +#define IGA1_PIXELTIMING_VER_ADDR_FORMULA(x) (x - 1) +#define IGA1_PIXELTIMING_VER_BLANK_START_FORMULA(x) (x - 1) +#define IGA1_PIXELTIMING_VER_BLANK_END_FORMULA(x) (x - 1) +#define IGA1_PIXELTIMING_VER_SYNC_START_FORMULA(x) (x - 1) +#define IGA1_PIXELTIMING_VER_SYNC_END_FORMULA(x) (x - 1) + +#define IGA1_PIXELTIMING_HVSYNC_OFFSET_END_FORMULA(x, y) \ + ((x / 2) - 1 - (x - y)) + +/************************************************/ +/* Define IGA1 Display Timing */ +/************************************************/ + +/* IGA1 Horizontal Total */ +static struct vga_regset iga1_hor_total[] = { + { VGA_CRT_IC, 0x00, 0, 7 }, + { VGA_CRT_IC, 0x36, 3, 3 } +}; + +/* IGA1 Horizontal Addressable Video */ +static struct vga_regset iga1_hor_addr[] = { + { VGA_CRT_IC, 0x01, 0, 7 }, + { VGA_CRT_IC, 0x45, 1, 1 } +}; + +/* IGA1 Horizontal Blank Start */ +static struct vga_regset iga1_hor_blank_start[] = { + { VGA_CRT_IC, 0x02, 0, 7 }, + { VGA_CRT_IC, 0x45, 2, 2 } +}; + +/* IGA1 Horizontal Blank End */ +static struct vga_regset iga1_hor_blank_end[] = { + { VGA_CRT_IC, 0x03, 0, 4 }, + { VGA_CRT_IC, 0x05, 7, 7 }, + { VGA_CRT_IC, 0x33, 5, 5 } +}; + +/* IGA1 Horizontal Sync Start */ +static struct vga_regset iga1_hor_sync_start[] = { + { VGA_CRT_IC, 0x04, 0, 7 }, + { VGA_CRT_IC, 0x33, 4, 4 } +}; + +/* IGA1 Horizontal Sync End */ +static struct vga_regset iga1_hor_sync_end[] = { + { VGA_CRT_IC, 0x05, 0, 4 } +}; + +/* IGA1 Vertical Total */ +static struct vga_regset iga1_ver_total[] = { + { VGA_CRT_IC, 0x06, 0, 7 }, + { VGA_CRT_IC, 0x07, 0, 0 }, + { VGA_CRT_IC, 0x07, 5, 5 }, + { VGA_CRT_IC, 0x35, 0, 0 } +}; + +/* IGA1 Vertical Addressable Video */ +static struct vga_regset iga1_ver_addr[] = { + { VGA_CRT_IC, 0x12, 0, 7 }, + { VGA_CRT_IC, 0x07, 1, 1 }, + { VGA_CRT_IC, 0x07, 6, 6 }, + { VGA_CRT_IC, 0x35, 2, 2 } +}; + +/* IGA1 Vertical Blank Start */ +static struct vga_regset iga1_ver_blank_start[] = { + { VGA_CRT_IC, 0x15, 0, 7 }, + { VGA_CRT_IC, 0x07, 3, 3 }, + { VGA_CRT_IC, 0x09, 5, 5 }, + { VGA_CRT_IC, 0x35, 3, 3 } +}; + +/* IGA1 Vertical Blank End */ +static struct vga_regset iga1_ver_blank_end[] = { + { VGA_CRT_IC, 0x16, 0, 7 } +}; + +/* IGA1 Vertical Sync Start */ +static struct vga_regset iga1_ver_sync_start[] = { + { VGA_CRT_IC, 0x10, 0, 7 }, + { VGA_CRT_IC, 0x07, 2, 2 }, + { VGA_CRT_IC, 0x07, 7, 7 }, + { VGA_CRT_IC, 0x35, 1, 1 } +}; + +/* IGA1 Vertical Sync End */ +static struct vga_regset iga1_ver_sync_end[] = { + { VGA_CRT_IC, 0x11, 0, 3 } +}; + +/************************************************/ +/* Define IGA2 Display Timing */ +/************************************************/ + +/* IGA2 Horizontal Total */ +static struct vga_regset iga2_hor_total[] = { + { VGA_CRT_IC, 0x50, 0, 7 }, + { VGA_CRT_IC, 0x55, 0, 3 } +}; + +/* IGA2 Horizontal Addressable Video */ +static struct vga_regset iga2_hor_addr[] = { + { VGA_CRT_IC, 0x51, 0, 7 }, + { VGA_CRT_IC, 0x55, 4, 6 }, + { VGA_CRT_IC, 0x55, 7, 7 } +}; + +/* IGA2 Horizontal Blank Start */ +static struct vga_regset iga2_hor_blank_start[] = { + { VGA_CRT_IC, 0x52, 0, 7 }, + { VGA_CRT_IC, 0x54, 0, 2 }, + { VGA_CRT_IC, 0x6B, 0, 0 } +}; + +/* IGA2 Horizontal Blank End */ +static struct vga_regset iga2_hor_blank_end[] = { + { VGA_CRT_IC, 0x53, 0, 7 }, + { VGA_CRT_IC, 0x54, 3, 5 }, + { VGA_CRT_IC, 0x5D, 6, 6 } +}; + +/* IGA2 Horizontal Sync Start */ +static struct vga_regset iga2_hor_sync_start[] = { + { VGA_CRT_IC, 0x56, 0, 7 }, + { VGA_CRT_IC, 0x54, 6, 7 }, + { VGA_CRT_IC, 0x5C, 7, 7 }, + { VGA_CRT_IC, 0x5D, 7, 7 } +}; + +/* IGA2 Horizontal Sync End */ +static struct vga_regset iga2_hor_sync_end[] = { + { VGA_CRT_IC, 0x57, 0, 7 }, + { VGA_CRT_IC, 0x5C, 6, 6 } +}; + +/* IGA2 Vertical Total */ +static struct vga_regset iga2_ver_total[] = { + { VGA_CRT_IC, 0x58, 0, 7 }, + { VGA_CRT_IC, 0x5D, 0, 2 } +}; + +/* IGA2 Vertical Addressable Video */ +static struct vga_regset iga2_ver_addr[] = { + { VGA_CRT_IC, 0x59, 0, 7 }, + { VGA_CRT_IC, 0x5D, 3, 5 } +}; + +/* IGA2 Vertical Blank Start */ +static struct vga_regset iga2_ver_blank_start[] = { + { VGA_CRT_IC, 0x5A, 0, 7 }, + { VGA_CRT_IC, 0x5C, 0, 2 } +}; + +/* IGA2 Vertical Blank End */ +static struct vga_regset iga2_ver_blank_end[] = { + { VGA_CRT_IC, 0x5B, 0, 7 }, + { VGA_CRT_IC, 0x5C, 3, 5 } +}; + +/* IGA2 Vertical Sync Start */ +static struct vga_regset iga2_ver_sync_start[] = { + { VGA_CRT_IC, 0x5E, 0, 7 }, + { VGA_CRT_IC, 0x5F, 5, 7 } +}; + +/* IGA2 Vertical Sync End */ +static struct vga_regset iga2_ver_sync_end[] = { + { VGA_CRT_IC, 0x5F, 0, 4 } +}; + +/* IGA1 pixel timing Registers */ +#define IGA1_PIX_H_TOTAL_REG 0x8400 /* [15:0] */ +#define IGA1_PIX_H_ADDR_REG 0x8400 /* [31:16] */ +#define IGA1_PIX_H_BNK_ST_REG 0x8404 /* [15:0] */ +#define IGA1_PIX_H_BNK_END_REG 0x8404 /* [31:16] */ +#define IGA1_PIX_H_SYNC_ST_REG 0x8408 /* [15:0] */ +#define IGA1_PIX_H_SYNC_END_REG 0x8408 /* [31:16] */ +#define IGA1_PIX_V_TOTAL_REG 0x8424 /* [10:0] */ +#define IGA1_PIX_V_ADDR_REG 0x8424 /* [26:16] */ +#define IGA1_PIX_V_BNK_ST_REG 0x8428 /* [10:0] */ +#define IGA1_PIX_V_BNK_END_REG 0x8428 /* [26:16] */ +#define IGA1_PIX_V_SYNC_ST_REG 0x842C /* [10:0] */ +#define IGA1_PIX_V_SYNC_END_REG 0x842C /* [15:12] */ +#define IGA1_PIX_HALF_LINE_REG 0x8434 /* [15:0] */ + +#define IGA1_PIX_H_TOTAL_MASK 0x0000FFFF /* [15:0] */ +#define IGA1_PIX_H_ADDR_MASK 0xFFFF0000 /* [31:16] */ +#define IGA1_PIX_H_BNK_ST_MASK 0x0000FFFF /* [15:0] */ +#define IGA1_PIX_H_BNK_END_MASK 0xFFFF0000 /* [31:16] */ +#define IGA1_PIX_H_SYNC_ST_MASK 0x0000FFFF /* [15:0] */ +#define IGA1_PIX_H_SYNC_END_MASK 0xFFFF0000 /* [31:16] */ +#define IGA1_PIX_V_TOTAL_MASK 0x000007FF /* [10:0] */ +#define IGA1_PIX_V_ADDR_MASK 0x07FF0000 /* [26:16] */ +#define IGA1_PIX_V_BNK_ST_MASK 0x000007FF /* [10:0] */ +#define IGA1_PIX_V_BNK_END_MASK 0x07FF0000 /* [26:16] */ +#define IGA1_PIX_V_SYNC_ST_MASK 0x000007FF /* [10:0] */ +#define IGA1_PIX_V_SYNC_END_MASK 0x0000F000 /* [15:12] */ +#define IGA1_PIX_HALF_LINE_MASK 0x0000FFFF /* [15:0] */ + +#endif -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 04/28] drm/via: Add via_drv.h 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (2 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 03/28] drm/via: Add via_disp_reg.h Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-25 6:51 ` Sam Ravnborg 2022-06-28 14:32 ` Jani Nikula 2022-06-24 20:26 ` [PATCH 05/28] drm/via: Add via_regs.h Kevin Brace ` (16 subsequent siblings) 20 siblings, 2 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Main header file for the module. Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_drv.h | 437 ++++++++++++++++++++++++++++++++++ 1 file changed, 437 insertions(+) create mode 100644 drivers/gpu/drm/via/via_drv.h diff --git a/drivers/gpu/drm/via/via_drv.h b/drivers/gpu/drm/via/via_drv.h new file mode 100644 index 000000000000..330ab8905417 --- /dev/null +++ b/drivers/gpu/drm/via/via_drv.h @@ -0,0 +1,437 @@ +/* + * Copyright © 2019 Kevin Brace. + * Copyright 2012 James Simmons. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * Kevin Brace <kevinbrace@bracecomputerlab.com> + * James Simmons <jsimmons@infradead.org> + */ + +#ifndef _VIA_DRV_H +#define _VIA_DRV_H + + +#include <linux/pci_ids.h> + +#include <video/vga.h> + +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_encoder.h> +#include <drm/drm_fb_helper.h> +#include <drm/drm_plane.h> + +#include <drm/ttm/ttm_bo_api.h> +#include <drm/ttm/ttm_bo_driver.h> +#include <drm/ttm/ttm_placement.h> + +#include "via_crtc_hw.h" +#include "via_regs.h" + + +#define DRIVER_MAJOR 3 +#define DRIVER_MINOR 5 +#define DRIVER_PATCHLEVEL 2 +#define DRIVER_NAME "via" +#define DRIVER_DESC "OpenChrome DRM for VIA Technologies Chrome IGP" +#define DRIVER_DATE "20220620" +#define DRIVER_AUTHOR "OpenChrome Project" + + +#define VIA_TTM_PL_NUM 2 + +#define VIA_MAX_CRTC 2 + +#define VIA_CURSOR_SIZE 64 + +#define VIA_MM_ALIGN_SIZE 16 + + +#define CLE266_REVISION_AX 0x0A +#define CLE266_REVISION_CX 0x0C + +#define CX700_REVISION_700 0x0 +#define CX700_REVISION_700M 0x1 +#define CX700_REVISION_700M2 0x2 + +#define VIA_MEM_NONE 0x00 +#define VIA_MEM_SDR66 0x01 +#define VIA_MEM_SDR100 0x02 +#define VIA_MEM_SDR133 0x03 +#define VIA_MEM_DDR_200 0x04 +#define VIA_MEM_DDR_266 0x05 +#define VIA_MEM_DDR_333 0x06 +#define VIA_MEM_DDR_400 0x07 +#define VIA_MEM_DDR2_400 0x08 +#define VIA_MEM_DDR2_533 0x09 +#define VIA_MEM_DDR2_667 0x0A +#define VIA_MEM_DDR2_800 0x0B +#define VIA_MEM_DDR2_1066 0x0C +#define VIA_MEM_DDR3_533 0x0D +#define VIA_MEM_DDR3_667 0x0E +#define VIA_MEM_DDR3_800 0x0F +#define VIA_MEM_DDR3_1066 0x10 +#define VIA_MEM_DDR3_1333 0x11 +#define VIA_MEM_DDR3_1600 0x12 + +/* IGA Scaling disable */ +#define VIA_NO_SCALING 0 + +/* IGA Scaling down */ +#define VIA_HOR_SHRINK BIT(0) +#define VIA_VER_SHRINK BIT(1) +#define VIA_SHRINK (BIT(0) | BIT(1)) + +/* IGA Scaling up */ +#define VIA_HOR_EXPAND BIT(2) +#define VIA_VER_EXPAND BIT(3) +#define VIA_EXPAND (BIT(2) | BIT(3)) + +/* Define IGA Scaling up/down status : Horizontal or Vertical */ +/* Is IGA Hor scaling up/down status */ +#define HOR_SCALE BIT(0) +/* Is IGA Ver scaling up/down status */ +#define VER_SCALE BIT(1) +/* Is IGA Hor and Ver scaling up/down status */ +#define HOR_VER_SCALE (BIT(0) | BIT(1)) + +#define VIA_I2C_NONE 0x0 +#define VIA_I2C_BUS1 BIT(0) +#define VIA_I2C_BUS2 BIT(1) +#define VIA_I2C_BUS3 BIT(2) +#define VIA_I2C_BUS4 BIT(3) +#define VIA_I2C_BUS5 BIT(4) + +#define VIA_DI_PORT_NONE 0x0 +#define VIA_DI_PORT_DIP0 BIT(0) +#define VIA_DI_PORT_DIP1 BIT(1) +#define VIA_DI_PORT_DVP0 BIT(2) +#define VIA_DI_PORT_DVP1 BIT(3) +#define VIA_DI_PORT_DFPL BIT(4) +#define VIA_DI_PORT_FPDPLOW BIT(4) +#define VIA_DI_PORT_DFPH BIT(5) +#define VIA_DI_PORT_FPDPHIGH BIT(5) +#define VIA_DI_PORT_DFP BIT(6) +#define VIA_DI_PORT_LVDS1 BIT(7) +#define VIA_DI_PORT_TMDS BIT(7) +#define VIA_DI_PORT_LVDS2 BIT(8) + +/* External TMDS (DVI) Transmitter Type */ +#define VIA_TMDS_NONE 0x0 +#define VIA_TMDS_VT1632 BIT(0) +#define VIA_TMDS_SII164 BIT(1) + + +typedef struct _via_lvds_info { + u32 x; + u32 y; +} via_lvds_info; + +struct via_crtc { + struct drm_crtc base; + struct crtc_timings pixel_timings; + struct crtc_timings timings; + struct vga_registers display_queue; + struct vga_registers high_threshold; + struct vga_registers threshold; + struct vga_registers fifo_depth; + struct vga_registers offset; + struct vga_registers fetch; + int scaling_mode; + uint32_t index; +}; + +struct via_connector { + struct drm_connector base; + u32 i2c_bus; + struct list_head props; + uint32_t flags; +}; + +struct via_encoder { + struct drm_encoder base; + u32 i2c_bus; + u32 di_port; + struct via_connector cons[]; +}; + +struct via_state { + struct vga_regset crt_regs[256]; + struct vga_regset seq_regs[256]; +}; + +struct via_bo { + struct ttm_buffer_object ttm_bo; + struct ttm_bo_kmap_obj kmap; + struct ttm_placement placement; + struct ttm_place placements[VIA_TTM_PL_NUM]; +}; + +enum via_engine { + VIA_ENG_H1 = 0, + VIA_ENG_H2, + VIA_ENG_H5S1, + VIA_ENG_H5S2VP1, + VIA_ENG_H6S2 +}; + +struct via_drm_priv { + struct drm_device dev; + + struct ttm_device bdev; + + /* Set this flag for ttm_bo_device_init. */ + bool need_dma32; + + int revision; + + u8 vram_type; + resource_size_t vram_start; + resource_size_t vram_size; + int vram_mtrr; + + resource_size_t mmio_base; + resource_size_t mmio_size; + void __iomem *mmio; + + struct via_state pm_cache; + + bool spread_spectrum; + + /* + * Frame Buffer Size Control register (SR14) needs to be saved and + * restored upon standby resume or can lead to a display corruption + * issue. These registers are only available on VX800, VX855, and + * VX900 chipsets. This bug was observed on VIA EPIA-M830 mainboard. + */ + uint8_t saved_sr14; + + /* + * GTI registers (SR66 through SR6F) need to be saved and restored + * upon standby resume or can lead to a display corruption issue. + * These registers are only available on VX800, VX855, and VX900 + * chipsets. This bug was observed on VIA EPIA-M830 mainboard. + */ + uint8_t saved_sr66; + uint8_t saved_sr67; + uint8_t saved_sr68; + uint8_t saved_sr69; + uint8_t saved_sr6a; + uint8_t saved_sr6b; + uint8_t saved_sr6c; + uint8_t saved_sr6d; + uint8_t saved_sr6e; + uint8_t saved_sr6f; + + /* 3X5.3B through 3X5.3F are scratch pad registers. + * They are important for FP detection. */ + uint8_t saved_cr3b; + uint8_t saved_cr3c; + uint8_t saved_cr3d; + uint8_t saved_cr3e; + uint8_t saved_cr3f; + + /* + * Due to the way VIA NanoBook reference design implemented + * the pin strapping settings, DRM needs to ignore them for + * FP and DVI to be properly detected. + */ + bool is_via_nanobook; + + /* + * Quanta IL1 netbook has its FP connected to DVP1 + * rather than LVDS, hence, a special flag register + * is needed for properly controlling its FP. + */ + bool is_quanta_il1; + + /* + * Samsung NC20 netbook has its FP connected to LVDS2 + * rather than the more logical LVDS1, hence, a special + * flag register is needed for properly controlling its + * FP. + */ + bool is_samsung_nc20; + + bool dac_presence; + u32 dac_i2c_bus; + + bool int_tmds_presence; + u32 int_tmds_di_port; + u32 int_tmds_i2c_bus; + + bool ext_tmds_presence; + u32 ext_tmds_di_port; + u32 ext_tmds_i2c_bus; + u32 ext_tmds_transmitter; + + bool int_fp1_presence; + u32 int_fp1_di_port; + u32 int_fp1_i2c_bus; + + bool int_fp2_presence; + u32 int_fp2_di_port; + u32 int_fp2_i2c_bus; + + /* Keeping track of the number of DVI connectors. */ + u32 number_dvi; + + /* Keeping track of the number of FP (Flat Panel) connectors. */ + u32 number_fp; + + u32 mapped_i2c_bus; +}; + + +/* + * Shortcut for using container_of macro. + */ +#define to_via_drm_priv(x) container_of(x, struct via_drm_priv, dev) +#define to_ttm_bo(x) container_of(x, struct via_bo, ttm_bo) + + +/* VIA MMIO register access */ +#define VIA_BASE ((dev_priv->mmio)) + +#define VIA_READ(reg) ioread32(VIA_BASE + reg) +#define VIA_WRITE(reg, val) iowrite32(val, VIA_BASE + reg) +#define VIA_READ8(reg) ioread8(VIA_BASE + reg) +#define VIA_WRITE8(reg, val) iowrite8(val, VIA_BASE + reg) + +#define VIA_WRITE_MASK(reg, data, mask) \ + VIA_WRITE(reg, (data & mask) | (VIA_READ(reg) & ~mask)) \ + +#define VGABASE (VIA_BASE+VIA_MMIO_VGABASE) + + +static inline void +via_lock_crtc(void __iomem *regs) +{ + svga_wcrt_mask(regs, 0x11, BIT(7), BIT(7)); +} + +static inline void +via_unlock_crtc(void __iomem *regs, int pci_id) +{ + u8 mask = BIT(0); + + svga_wcrt_mask(regs, 0x11, 0, BIT(7)); + if ((pci_id == PCI_DEVICE_ID_VIA_VX875) || + (pci_id == PCI_DEVICE_ID_VIA_VX900_VGA)) + mask = BIT(4); + svga_wcrt_mask(regs, 0x47, 0, mask); +} + + +extern int via_driver_num_ioctls; + +extern struct ttm_device_funcs via_bo_driver; + +int via_vram_detect(struct via_drm_priv *dev_priv); +int via_vram_init(struct via_drm_priv *dev_priv); +void via_vram_fini(struct via_drm_priv *dev_priv); +int via_mmio_init(struct via_drm_priv *dev_priv); +void via_mmio_fini(struct via_drm_priv *dev_priv); +void via_graphics_unlock(struct via_drm_priv *dev_priv); +void chip_revision_info(struct via_drm_priv *dev_priv); +int via_device_init(struct via_drm_priv *dev_priv); +void via_device_fini(struct via_drm_priv *dev_priv); +void via_mode_config_init(struct via_drm_priv *dev_priv); +int via_drm_init(struct drm_device *dev); +void via_drm_fini(struct drm_device *dev); + +int via_dev_pm_ops_suspend(struct device *dev); +int via_dev_pm_ops_resume(struct device *dev); + +void via_ttm_domain_to_placement(struct via_bo *bo, uint32_t ttm_domain); +void via_ttm_bo_destroy(struct ttm_buffer_object *tbo); +int via_bo_pin(struct via_bo *bo, uint32_t ttm_domain); +void via_bo_unpin(struct via_bo *bo); +int via_bo_create(struct drm_device *dev, struct ttm_device *bdev, + uint64_t size, enum ttm_bo_type type, + uint32_t ttm_domain, bool kmap, + struct via_bo **bo_ptr); +void via_bo_destroy(struct via_bo *bo, bool kmap); +int via_mm_init(struct via_drm_priv *dev_priv); +void via_mm_fini(struct via_drm_priv *dev_priv); + +void via_transmitter_io_pad_state(struct via_drm_priv *dev_priv, + uint32_t di_port, bool io_pad_on); +void via_transmitter_clock_drive_strength(struct via_drm_priv *dev_priv, + u32 di_port, u8 drive_strength); +void via_transmitter_data_drive_strength(struct via_drm_priv *dev_priv, + u32 di_port, u8 drive_strength); +void via_transmitter_display_source(struct via_drm_priv *dev_priv, + u32 di_port, int index); + +extern const struct drm_plane_helper_funcs via_cursor_drm_plane_helper_funcs; +extern const struct drm_plane_funcs via_cursor_drm_plane_funcs; +extern const uint32_t via_cursor_formats[]; +extern const unsigned int via_cursor_formats_size; + +/* display */ +int via_modeset_init(struct drm_device *dev); +void via_modeset_fini(struct drm_device *dev); + +/* i2c */ +struct i2c_adapter *via_find_ddc_bus(int port); +void via_i2c_readbytes(struct i2c_adapter *adapter, + u8 slave_addr, char offset, + u8 *buffer, unsigned int size); +void via_i2c_writebytes(struct i2c_adapter *adapter, + u8 slave_addr, char offset, + u8 *data, unsigned int size); +void via_i2c_reg_init(struct via_drm_priv *dev_priv); +int via_i2c_init(struct drm_device *dev); +void via_i2c_exit(void); + +/* clock */ +u32 via_get_clk_value(struct drm_device *dev, u32 clk); +void via_set_vclock(struct drm_crtc *crtc, u32 clk); + +/* crtc */ +void via_load_crtc_pixel_timing(struct drm_crtc *crtc, + struct drm_display_mode *mode); +int via_crtc_init(struct via_drm_priv *dev_priv, uint32_t index); + +/* encoders */ +void via_encoder_cleanup(struct drm_encoder *encoder); + +/* connectors */ +void via_connector_destroy(struct drm_connector *connector); + +void via_dac_probe(struct drm_device *dev); +bool via_vt1632_probe(struct i2c_adapter *i2c_bus); +bool via_sii164_probe(struct i2c_adapter *i2c_bus); +void via_ext_dvi_probe(struct drm_device *dev); +void via_tmds_probe(struct drm_device *dev); +void via_lvds_probe(struct drm_device *dev); + +void via_hdmi_init(struct drm_device *dev, u32 di_port); +void via_dac_init(struct drm_device *dev); +void via_vt1632_init(struct drm_device *dev); +void via_sii164_init(struct drm_device *dev); +void via_ext_dvi_init(struct drm_device *dev); +void via_tmds_init(struct drm_device *dev); +void via_lvds_init(struct drm_device *dev); + +#endif /* _VIA_DRV_H */ -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [PATCH 04/28] drm/via: Add via_drv.h 2022-06-24 20:26 ` [PATCH 04/28] drm/via: Add via_drv.h Kevin Brace @ 2022-06-25 6:51 ` Sam Ravnborg 2022-06-28 14:33 ` Jani Nikula 2022-06-28 14:32 ` Jani Nikula 1 sibling, 1 reply; 34+ messages in thread From: Sam Ravnborg @ 2022-06-25 6:51 UTC (permalink / raw) To: Kevin Brace; +Cc: Kevin Brace, dri-devel Hi Kevin, A few nitpicks in the following. Sam On Fri, Jun 24, 2022 at 03:26:09PM -0500, Kevin Brace wrote: > From: Kevin Brace <kevinbrace@bracecomputerlab.com> > > Main header file for the module. > > Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> > --- > drivers/gpu/drm/via/via_drv.h | 437 ++++++++++++++++++++++++++++++++++ > 1 file changed, 437 insertions(+) > create mode 100644 drivers/gpu/drm/via/via_drv.h > > diff --git a/drivers/gpu/drm/via/via_drv.h b/drivers/gpu/drm/via/via_drv.h > new file mode 100644 > index 000000000000..330ab8905417 > --- /dev/null > +++ b/drivers/gpu/drm/via/via_drv.h > @@ -0,0 +1,437 @@ > +/* > + * Copyright © 2019 Kevin Brace. > + * Copyright 2012 James Simmons. All Rights Reserved. > + * > + * Permission is hereby granted, free of charge, to any person obtaining a > + * copy of this software and associated documentation files (the "Software"), > + * to deal in the Software without restriction, including without limitation > + * the rights to use, copy, modify, merge, publish, distribute, sub license, > + * and/or sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following conditions: > + * > + * The above copyright notice and this permission notice (including the > + * next paragraph) shall be included in all copies or substantial portions > + * of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL > + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR > + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, > + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER > + * DEALINGS IN THE SOFTWARE. As a general note, can the MIT license be replaced with /* SPDX-License-Identifier: MIT */ > + * > + * Author(s): > + * Kevin Brace <kevinbrace@bracecomputerlab.com> > + * James Simmons <jsimmons@infradead.org> > + */ > + > +#ifndef _VIA_DRV_H > +#define _VIA_DRV_H > + > + > +#include <linux/pci_ids.h> > + > +#include <video/vga.h> > + > +#include <drm/drm_crtc.h> > +#include <drm/drm_crtc_helper.h> > +#include <drm/drm_encoder.h> > +#include <drm/drm_fb_helper.h> > +#include <drm/drm_plane.h> > + > +#include <drm/ttm/ttm_bo_api.h> > +#include <drm/ttm/ttm_bo_driver.h> > +#include <drm/ttm/ttm_placement.h> > + > +#include "via_crtc_hw.h" > +#include "via_regs.h" Grouped and sorted in each group - nice. > + > + > +#define DRIVER_MAJOR 3 > +#define DRIVER_MINOR 5 > +#define DRIVER_PATCHLEVEL 2 > +#define DRIVER_NAME "via" > +#define DRIVER_DESC "OpenChrome DRM for VIA Technologies Chrome IGP" > +#define DRIVER_DATE "20220620" > +#define DRIVER_AUTHOR "OpenChrome Project" > + > + > +#define VIA_TTM_PL_NUM 2 > + > +#define VIA_MAX_CRTC 2 > + > +#define VIA_CURSOR_SIZE 64 > + > +#define VIA_MM_ALIGN_SIZE 16 > + > + > +#define CLE266_REVISION_AX 0x0A > +#define CLE266_REVISION_CX 0x0C > + > +#define CX700_REVISION_700 0x0 > +#define CX700_REVISION_700M 0x1 > +#define CX700_REVISION_700M2 0x2 > + > +#define VIA_MEM_NONE 0x00 > +#define VIA_MEM_SDR66 0x01 > +#define VIA_MEM_SDR100 0x02 > +#define VIA_MEM_SDR133 0x03 > +#define VIA_MEM_DDR_200 0x04 > +#define VIA_MEM_DDR_266 0x05 > +#define VIA_MEM_DDR_333 0x06 > +#define VIA_MEM_DDR_400 0x07 > +#define VIA_MEM_DDR2_400 0x08 > +#define VIA_MEM_DDR2_533 0x09 > +#define VIA_MEM_DDR2_667 0x0A > +#define VIA_MEM_DDR2_800 0x0B > +#define VIA_MEM_DDR2_1066 0x0C > +#define VIA_MEM_DDR3_533 0x0D > +#define VIA_MEM_DDR3_667 0x0E > +#define VIA_MEM_DDR3_800 0x0F > +#define VIA_MEM_DDR3_1066 0x10 > +#define VIA_MEM_DDR3_1333 0x11 > +#define VIA_MEM_DDR3_1600 0x12 > + > +/* IGA Scaling disable */ > +#define VIA_NO_SCALING 0 > + > +/* IGA Scaling down */ > +#define VIA_HOR_SHRINK BIT(0) > +#define VIA_VER_SHRINK BIT(1) > +#define VIA_SHRINK (BIT(0) | BIT(1)) > + > +/* IGA Scaling up */ > +#define VIA_HOR_EXPAND BIT(2) > +#define VIA_VER_EXPAND BIT(3) > +#define VIA_EXPAND (BIT(2) | BIT(3)) > + > +/* Define IGA Scaling up/down status : Horizontal or Vertical */ > +/* Is IGA Hor scaling up/down status */ > +#define HOR_SCALE BIT(0) > +/* Is IGA Ver scaling up/down status */ > +#define VER_SCALE BIT(1) > +/* Is IGA Hor and Ver scaling up/down status */ > +#define HOR_VER_SCALE (BIT(0) | BIT(1)) > + > +#define VIA_I2C_NONE 0x0 > +#define VIA_I2C_BUS1 BIT(0) > +#define VIA_I2C_BUS2 BIT(1) > +#define VIA_I2C_BUS3 BIT(2) > +#define VIA_I2C_BUS4 BIT(3) > +#define VIA_I2C_BUS5 BIT(4) > + > +#define VIA_DI_PORT_NONE 0x0 > +#define VIA_DI_PORT_DIP0 BIT(0) > +#define VIA_DI_PORT_DIP1 BIT(1) > +#define VIA_DI_PORT_DVP0 BIT(2) > +#define VIA_DI_PORT_DVP1 BIT(3) > +#define VIA_DI_PORT_DFPL BIT(4) > +#define VIA_DI_PORT_FPDPLOW BIT(4) > +#define VIA_DI_PORT_DFPH BIT(5) > +#define VIA_DI_PORT_FPDPHIGH BIT(5) > +#define VIA_DI_PORT_DFP BIT(6) > +#define VIA_DI_PORT_LVDS1 BIT(7) > +#define VIA_DI_PORT_TMDS BIT(7) > +#define VIA_DI_PORT_LVDS2 BIT(8) > + > +/* External TMDS (DVI) Transmitter Type */ > +#define VIA_TMDS_NONE 0x0 > +#define VIA_TMDS_VT1632 BIT(0) > +#define VIA_TMDS_SII164 BIT(1) > + > + > +typedef struct _via_lvds_info { > + u32 x; > + u32 y; > +} via_lvds_info; Make this look like: typedef struct via_lvds_info { u32 x; u32 y; }; This follows the normal linux way, and there is only one user anyway. > + > +struct via_crtc { > + struct drm_crtc base; > + struct crtc_timings pixel_timings; > + struct crtc_timings timings; > + struct vga_registers display_queue; > + struct vga_registers high_threshold; > + struct vga_registers threshold; > + struct vga_registers fifo_depth; > + struct vga_registers offset; > + struct vga_registers fetch; > + int scaling_mode; > + uint32_t index; > +}; > + > +struct via_connector { > + struct drm_connector base; > + u32 i2c_bus; > + struct list_head props; > + uint32_t flags; > +}; > + > +struct via_encoder { > + struct drm_encoder base; > + u32 i2c_bus; > + u32 di_port; > + struct via_connector cons[]; > +}; > + > +struct via_state { > + struct vga_regset crt_regs[256]; > + struct vga_regset seq_regs[256]; > +}; > + > +struct via_bo { > + struct ttm_buffer_object ttm_bo; > + struct ttm_bo_kmap_obj kmap; > + struct ttm_placement placement; > + struct ttm_place placements[VIA_TTM_PL_NUM]; > +}; > + > +enum via_engine { > + VIA_ENG_H1 = 0, > + VIA_ENG_H2, > + VIA_ENG_H5S1, > + VIA_ENG_H5S2VP1, > + VIA_ENG_H6S2 > +}; > + > +struct via_drm_priv { > + struct drm_device dev; > + > + struct ttm_device bdev; > + > + /* Set this flag for ttm_bo_device_init. */ > + bool need_dma32; > + > + int revision; > + > + u8 vram_type; > + resource_size_t vram_start; > + resource_size_t vram_size; > + int vram_mtrr; > + > + resource_size_t mmio_base; > + resource_size_t mmio_size; > + void __iomem *mmio; > + > + struct via_state pm_cache; > + > + bool spread_spectrum; > + > + /* > + * Frame Buffer Size Control register (SR14) needs to be saved and > + * restored upon standby resume or can lead to a display corruption > + * issue. These registers are only available on VX800, VX855, and > + * VX900 chipsets. This bug was observed on VIA EPIA-M830 mainboard. > + */ > + uint8_t saved_sr14; > + > + /* > + * GTI registers (SR66 through SR6F) need to be saved and restored > + * upon standby resume or can lead to a display corruption issue. > + * These registers are only available on VX800, VX855, and VX900 > + * chipsets. This bug was observed on VIA EPIA-M830 mainboard. > + */ > + uint8_t saved_sr66; > + uint8_t saved_sr67; > + uint8_t saved_sr68; > + uint8_t saved_sr69; > + uint8_t saved_sr6a; > + uint8_t saved_sr6b; > + uint8_t saved_sr6c; > + uint8_t saved_sr6d; > + uint8_t saved_sr6e; > + uint8_t saved_sr6f; > + > + /* 3X5.3B through 3X5.3F are scratch pad registers. > + * They are important for FP detection. */ The final */ shall be moved to a new line. > + uint8_t saved_cr3b; > + uint8_t saved_cr3c; > + uint8_t saved_cr3d; > + uint8_t saved_cr3e; > + uint8_t saved_cr3f; > + > + /* > + * Due to the way VIA NanoBook reference design implemented > + * the pin strapping settings, DRM needs to ignore them for > + * FP and DVI to be properly detected. > + */ > + bool is_via_nanobook; > + > + /* > + * Quanta IL1 netbook has its FP connected to DVP1 > + * rather than LVDS, hence, a special flag register > + * is needed for properly controlling its FP. > + */ > + bool is_quanta_il1; > + > + /* > + * Samsung NC20 netbook has its FP connected to LVDS2 > + * rather than the more logical LVDS1, hence, a special > + * flag register is needed for properly controlling its > + * FP. > + */ > + bool is_samsung_nc20; > + > + bool dac_presence; > + u32 dac_i2c_bus; > + > + bool int_tmds_presence; > + u32 int_tmds_di_port; > + u32 int_tmds_i2c_bus; > + > + bool ext_tmds_presence; > + u32 ext_tmds_di_port; > + u32 ext_tmds_i2c_bus; > + u32 ext_tmds_transmitter; > + > + bool int_fp1_presence; > + u32 int_fp1_di_port; > + u32 int_fp1_i2c_bus; > + > + bool int_fp2_presence; > + u32 int_fp2_di_port; > + u32 int_fp2_i2c_bus; > + > + /* Keeping track of the number of DVI connectors. */ > + u32 number_dvi; > + > + /* Keeping track of the number of FP (Flat Panel) connectors. */ > + u32 number_fp; > + > + u32 mapped_i2c_bus; > +}; > + > + > +/* > + * Shortcut for using container_of macro. > + */ > +#define to_via_drm_priv(x) container_of(x, struct via_drm_priv, dev) > +#define to_ttm_bo(x) container_of(x, struct via_bo, ttm_bo) > + > + > +/* VIA MMIO register access */ > +#define VIA_BASE ((dev_priv->mmio)) > + > +#define VIA_READ(reg) ioread32(VIA_BASE + reg) > +#define VIA_WRITE(reg, val) iowrite32(val, VIA_BASE + reg) > +#define VIA_READ8(reg) ioread8(VIA_BASE + reg) > +#define VIA_WRITE8(reg, val) iowrite8(val, VIA_BASE + reg) I am a fan of using regmap when possible as this is a nice abstraction on top of the io access methods - with some nice helpers. For via the pain/gain ratio is likely too high, but at least something to know exists. > + > +#define VIA_WRITE_MASK(reg, data, mask) \ > + VIA_WRITE(reg, (data & mask) | (VIA_READ(reg) & ~mask)) \ > + > +#define VGABASE (VIA_BASE+VIA_MMIO_VGABASE) > + > + > +static inline void > +via_lock_crtc(void __iomem *regs) > +{ > + svga_wcrt_mask(regs, 0x11, BIT(7), BIT(7)); > +} > + > +static inline void > +via_unlock_crtc(void __iomem *regs, int pci_id) > +{ > + u8 mask = BIT(0); > + > + svga_wcrt_mask(regs, 0x11, 0, BIT(7)); > + if ((pci_id == PCI_DEVICE_ID_VIA_VX875) || > + (pci_id == PCI_DEVICE_ID_VIA_VX900_VGA)) > + mask = BIT(4); > + svga_wcrt_mask(regs, 0x47, 0, mask); > +} > + > + > +extern int via_driver_num_ioctls; > + > +extern struct ttm_device_funcs via_bo_driver; > + > +int via_vram_detect(struct via_drm_priv *dev_priv); > +int via_vram_init(struct via_drm_priv *dev_priv); > +void via_vram_fini(struct via_drm_priv *dev_priv); > +int via_mmio_init(struct via_drm_priv *dev_priv); > +void via_mmio_fini(struct via_drm_priv *dev_priv); > +void via_graphics_unlock(struct via_drm_priv *dev_priv); > +void chip_revision_info(struct via_drm_priv *dev_priv); > +int via_device_init(struct via_drm_priv *dev_priv); > +void via_device_fini(struct via_drm_priv *dev_priv); > +void via_mode_config_init(struct via_drm_priv *dev_priv); > +int via_drm_init(struct drm_device *dev); > +void via_drm_fini(struct drm_device *dev); > + > +int via_dev_pm_ops_suspend(struct device *dev); > +int via_dev_pm_ops_resume(struct device *dev); > + > +void via_ttm_domain_to_placement(struct via_bo *bo, uint32_t ttm_domain); > +void via_ttm_bo_destroy(struct ttm_buffer_object *tbo); > +int via_bo_pin(struct via_bo *bo, uint32_t ttm_domain); > +void via_bo_unpin(struct via_bo *bo); > +int via_bo_create(struct drm_device *dev, struct ttm_device *bdev, > + uint64_t size, enum ttm_bo_type type, > + uint32_t ttm_domain, bool kmap, > + struct via_bo **bo_ptr); > +void via_bo_destroy(struct via_bo *bo, bool kmap); > +int via_mm_init(struct via_drm_priv *dev_priv); > +void via_mm_fini(struct via_drm_priv *dev_priv); > + > +void via_transmitter_io_pad_state(struct via_drm_priv *dev_priv, > + uint32_t di_port, bool io_pad_on); > +void via_transmitter_clock_drive_strength(struct via_drm_priv *dev_priv, > + u32 di_port, u8 drive_strength); > +void via_transmitter_data_drive_strength(struct via_drm_priv *dev_priv, > + u32 di_port, u8 drive_strength); > +void via_transmitter_display_source(struct via_drm_priv *dev_priv, > + u32 di_port, int index); > + > +extern const struct drm_plane_helper_funcs via_cursor_drm_plane_helper_funcs; > +extern const struct drm_plane_funcs via_cursor_drm_plane_funcs; > +extern const uint32_t via_cursor_formats[]; > +extern const unsigned int via_cursor_formats_size; > + > +/* display */ > +int via_modeset_init(struct drm_device *dev); > +void via_modeset_fini(struct drm_device *dev); > + > +/* i2c */ > +struct i2c_adapter *via_find_ddc_bus(int port); > +void via_i2c_readbytes(struct i2c_adapter *adapter, > + u8 slave_addr, char offset, > + u8 *buffer, unsigned int size); > +void via_i2c_writebytes(struct i2c_adapter *adapter, > + u8 slave_addr, char offset, > + u8 *data, unsigned int size); > +void via_i2c_reg_init(struct via_drm_priv *dev_priv); > +int via_i2c_init(struct drm_device *dev); > +void via_i2c_exit(void); > + > +/* clock */ > +u32 via_get_clk_value(struct drm_device *dev, u32 clk); > +void via_set_vclock(struct drm_crtc *crtc, u32 clk); > + > +/* crtc */ > +void via_load_crtc_pixel_timing(struct drm_crtc *crtc, > + struct drm_display_mode *mode); > +int via_crtc_init(struct via_drm_priv *dev_priv, uint32_t index); > + > +/* encoders */ > +void via_encoder_cleanup(struct drm_encoder *encoder); > + > +/* connectors */ > +void via_connector_destroy(struct drm_connector *connector); > + > +void via_dac_probe(struct drm_device *dev); > +bool via_vt1632_probe(struct i2c_adapter *i2c_bus); > +bool via_sii164_probe(struct i2c_adapter *i2c_bus); > +void via_ext_dvi_probe(struct drm_device *dev); > +void via_tmds_probe(struct drm_device *dev); > +void via_lvds_probe(struct drm_device *dev); > + > +void via_hdmi_init(struct drm_device *dev, u32 di_port); > +void via_dac_init(struct drm_device *dev); > +void via_vt1632_init(struct drm_device *dev); > +void via_sii164_init(struct drm_device *dev); > +void via_ext_dvi_init(struct drm_device *dev); > +void via_tmds_init(struct drm_device *dev); > +void via_lvds_init(struct drm_device *dev); > + > +#endif /* _VIA_DRV_H */ > -- > 2.35.1 ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 04/28] drm/via: Add via_drv.h 2022-06-25 6:51 ` Sam Ravnborg @ 2022-06-28 14:33 ` Jani Nikula 0 siblings, 0 replies; 34+ messages in thread From: Jani Nikula @ 2022-06-28 14:33 UTC (permalink / raw) To: Sam Ravnborg, Kevin Brace; +Cc: Kevin Brace, dri-devel On Sat, 25 Jun 2022, Sam Ravnborg <sam@ravnborg.org> wrote: > Hi Kevin, > > A few nitpicks in the following. > > Sam > > On Fri, Jun 24, 2022 at 03:26:09PM -0500, Kevin Brace wrote: >> +typedef struct _via_lvds_info { >> + u32 x; >> + u32 y; >> +} via_lvds_info; > Make this look like: > typedef struct via_lvds_info { > u32 x; > u32 y; > }; > > This follows the normal linux way, and there is only one user anyway. The normal linux way would be to *not* use typedefs in the first place. ;) BR, Jani. -- Jani Nikula, Intel Open Source Graphics Center ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 04/28] drm/via: Add via_drv.h 2022-06-24 20:26 ` [PATCH 04/28] drm/via: Add via_drv.h Kevin Brace 2022-06-25 6:51 ` Sam Ravnborg @ 2022-06-28 14:32 ` Jani Nikula 1 sibling, 0 replies; 34+ messages in thread From: Jani Nikula @ 2022-06-28 14:32 UTC (permalink / raw) To: Kevin Brace, dri-devel; +Cc: Kevin Brace On Fri, 24 Jun 2022, Kevin Brace <kevinbrace@gmx.com> wrote: > From: Kevin Brace <kevinbrace@bracecomputerlab.com> > > Main header file for the module. I sincerely suggest you reconsider this "main header file" approach. It seems like a nice idea to only have to include one header in each source file. Kind of feels cleaner in the C source. However, you'll end up recompiling your entire driver every time anything changes in this header, or in any of the headers it includes. Initially, it doesn't seem like much, for a small driver, etc. but it'll end up hurting you more than you'll know. For example, imagine a git bisect that's supposed to funnel towards the regressing commit, but every build for every commit takes just as long because everything gets rebuilt. And the bigger the driver grows, the harder it is to untangle this. Trust me, I know. I've spent a lot of time and effort trying to untangle a similar mess in i915. It's really, really painful. I suggest: * Split the header, add corresponding .h for each .c for the stuff it exposes. * Split the types and the macros to separate headers too. * Avoid including any headers from headers. Use forward declarations as much as possible. * Include minimal headers from headers. And from .c files too, but it's of lesser importance. * Avoid static inlines in headers, if they require you to include other headers. At the end of the day, it's your driver, and your call. But please do give it some thought. BR, Jani. > > Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> > --- > drivers/gpu/drm/via/via_drv.h | 437 ++++++++++++++++++++++++++++++++++ > 1 file changed, 437 insertions(+) > create mode 100644 drivers/gpu/drm/via/via_drv.h > > diff --git a/drivers/gpu/drm/via/via_drv.h b/drivers/gpu/drm/via/via_drv.h > new file mode 100644 > index 000000000000..330ab8905417 > --- /dev/null > +++ b/drivers/gpu/drm/via/via_drv.h > @@ -0,0 +1,437 @@ > +/* > + * Copyright © 2019 Kevin Brace. > + * Copyright 2012 James Simmons. All Rights Reserved. > + * > + * Permission is hereby granted, free of charge, to any person obtaining a > + * copy of this software and associated documentation files (the "Software"), > + * to deal in the Software without restriction, including without limitation > + * the rights to use, copy, modify, merge, publish, distribute, sub license, > + * and/or sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following conditions: > + * > + * The above copyright notice and this permission notice (including the > + * next paragraph) shall be included in all copies or substantial portions > + * of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL > + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR > + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, > + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER > + * DEALINGS IN THE SOFTWARE. > + * > + * Author(s): > + * Kevin Brace <kevinbrace@bracecomputerlab.com> > + * James Simmons <jsimmons@infradead.org> > + */ > + > +#ifndef _VIA_DRV_H > +#define _VIA_DRV_H > + > + > +#include <linux/pci_ids.h> > + > +#include <video/vga.h> > + > +#include <drm/drm_crtc.h> > +#include <drm/drm_crtc_helper.h> > +#include <drm/drm_encoder.h> > +#include <drm/drm_fb_helper.h> > +#include <drm/drm_plane.h> > + > +#include <drm/ttm/ttm_bo_api.h> > +#include <drm/ttm/ttm_bo_driver.h> > +#include <drm/ttm/ttm_placement.h> > + > +#include "via_crtc_hw.h" > +#include "via_regs.h" > + > + > +#define DRIVER_MAJOR 3 > +#define DRIVER_MINOR 5 > +#define DRIVER_PATCHLEVEL 2 > +#define DRIVER_NAME "via" > +#define DRIVER_DESC "OpenChrome DRM for VIA Technologies Chrome IGP" > +#define DRIVER_DATE "20220620" > +#define DRIVER_AUTHOR "OpenChrome Project" > + > + > +#define VIA_TTM_PL_NUM 2 > + > +#define VIA_MAX_CRTC 2 > + > +#define VIA_CURSOR_SIZE 64 > + > +#define VIA_MM_ALIGN_SIZE 16 > + > + > +#define CLE266_REVISION_AX 0x0A > +#define CLE266_REVISION_CX 0x0C > + > +#define CX700_REVISION_700 0x0 > +#define CX700_REVISION_700M 0x1 > +#define CX700_REVISION_700M2 0x2 > + > +#define VIA_MEM_NONE 0x00 > +#define VIA_MEM_SDR66 0x01 > +#define VIA_MEM_SDR100 0x02 > +#define VIA_MEM_SDR133 0x03 > +#define VIA_MEM_DDR_200 0x04 > +#define VIA_MEM_DDR_266 0x05 > +#define VIA_MEM_DDR_333 0x06 > +#define VIA_MEM_DDR_400 0x07 > +#define VIA_MEM_DDR2_400 0x08 > +#define VIA_MEM_DDR2_533 0x09 > +#define VIA_MEM_DDR2_667 0x0A > +#define VIA_MEM_DDR2_800 0x0B > +#define VIA_MEM_DDR2_1066 0x0C > +#define VIA_MEM_DDR3_533 0x0D > +#define VIA_MEM_DDR3_667 0x0E > +#define VIA_MEM_DDR3_800 0x0F > +#define VIA_MEM_DDR3_1066 0x10 > +#define VIA_MEM_DDR3_1333 0x11 > +#define VIA_MEM_DDR3_1600 0x12 > + > +/* IGA Scaling disable */ > +#define VIA_NO_SCALING 0 > + > +/* IGA Scaling down */ > +#define VIA_HOR_SHRINK BIT(0) > +#define VIA_VER_SHRINK BIT(1) > +#define VIA_SHRINK (BIT(0) | BIT(1)) > + > +/* IGA Scaling up */ > +#define VIA_HOR_EXPAND BIT(2) > +#define VIA_VER_EXPAND BIT(3) > +#define VIA_EXPAND (BIT(2) | BIT(3)) > + > +/* Define IGA Scaling up/down status : Horizontal or Vertical */ > +/* Is IGA Hor scaling up/down status */ > +#define HOR_SCALE BIT(0) > +/* Is IGA Ver scaling up/down status */ > +#define VER_SCALE BIT(1) > +/* Is IGA Hor and Ver scaling up/down status */ > +#define HOR_VER_SCALE (BIT(0) | BIT(1)) > + > +#define VIA_I2C_NONE 0x0 > +#define VIA_I2C_BUS1 BIT(0) > +#define VIA_I2C_BUS2 BIT(1) > +#define VIA_I2C_BUS3 BIT(2) > +#define VIA_I2C_BUS4 BIT(3) > +#define VIA_I2C_BUS5 BIT(4) > + > +#define VIA_DI_PORT_NONE 0x0 > +#define VIA_DI_PORT_DIP0 BIT(0) > +#define VIA_DI_PORT_DIP1 BIT(1) > +#define VIA_DI_PORT_DVP0 BIT(2) > +#define VIA_DI_PORT_DVP1 BIT(3) > +#define VIA_DI_PORT_DFPL BIT(4) > +#define VIA_DI_PORT_FPDPLOW BIT(4) > +#define VIA_DI_PORT_DFPH BIT(5) > +#define VIA_DI_PORT_FPDPHIGH BIT(5) > +#define VIA_DI_PORT_DFP BIT(6) > +#define VIA_DI_PORT_LVDS1 BIT(7) > +#define VIA_DI_PORT_TMDS BIT(7) > +#define VIA_DI_PORT_LVDS2 BIT(8) > + > +/* External TMDS (DVI) Transmitter Type */ > +#define VIA_TMDS_NONE 0x0 > +#define VIA_TMDS_VT1632 BIT(0) > +#define VIA_TMDS_SII164 BIT(1) > + > + > +typedef struct _via_lvds_info { > + u32 x; > + u32 y; > +} via_lvds_info; > + > +struct via_crtc { > + struct drm_crtc base; > + struct crtc_timings pixel_timings; > + struct crtc_timings timings; > + struct vga_registers display_queue; > + struct vga_registers high_threshold; > + struct vga_registers threshold; > + struct vga_registers fifo_depth; > + struct vga_registers offset; > + struct vga_registers fetch; > + int scaling_mode; > + uint32_t index; > +}; > + > +struct via_connector { > + struct drm_connector base; > + u32 i2c_bus; > + struct list_head props; > + uint32_t flags; > +}; > + > +struct via_encoder { > + struct drm_encoder base; > + u32 i2c_bus; > + u32 di_port; > + struct via_connector cons[]; > +}; > + > +struct via_state { > + struct vga_regset crt_regs[256]; > + struct vga_regset seq_regs[256]; > +}; > + > +struct via_bo { > + struct ttm_buffer_object ttm_bo; > + struct ttm_bo_kmap_obj kmap; > + struct ttm_placement placement; > + struct ttm_place placements[VIA_TTM_PL_NUM]; > +}; > + > +enum via_engine { > + VIA_ENG_H1 = 0, > + VIA_ENG_H2, > + VIA_ENG_H5S1, > + VIA_ENG_H5S2VP1, > + VIA_ENG_H6S2 > +}; > + > +struct via_drm_priv { > + struct drm_device dev; > + > + struct ttm_device bdev; > + > + /* Set this flag for ttm_bo_device_init. */ > + bool need_dma32; > + > + int revision; > + > + u8 vram_type; > + resource_size_t vram_start; > + resource_size_t vram_size; > + int vram_mtrr; > + > + resource_size_t mmio_base; > + resource_size_t mmio_size; > + void __iomem *mmio; > + > + struct via_state pm_cache; > + > + bool spread_spectrum; > + > + /* > + * Frame Buffer Size Control register (SR14) needs to be saved and > + * restored upon standby resume or can lead to a display corruption > + * issue. These registers are only available on VX800, VX855, and > + * VX900 chipsets. This bug was observed on VIA EPIA-M830 mainboard. > + */ > + uint8_t saved_sr14; > + > + /* > + * GTI registers (SR66 through SR6F) need to be saved and restored > + * upon standby resume or can lead to a display corruption issue. > + * These registers are only available on VX800, VX855, and VX900 > + * chipsets. This bug was observed on VIA EPIA-M830 mainboard. > + */ > + uint8_t saved_sr66; > + uint8_t saved_sr67; > + uint8_t saved_sr68; > + uint8_t saved_sr69; > + uint8_t saved_sr6a; > + uint8_t saved_sr6b; > + uint8_t saved_sr6c; > + uint8_t saved_sr6d; > + uint8_t saved_sr6e; > + uint8_t saved_sr6f; > + > + /* 3X5.3B through 3X5.3F are scratch pad registers. > + * They are important for FP detection. */ > + uint8_t saved_cr3b; > + uint8_t saved_cr3c; > + uint8_t saved_cr3d; > + uint8_t saved_cr3e; > + uint8_t saved_cr3f; > + > + /* > + * Due to the way VIA NanoBook reference design implemented > + * the pin strapping settings, DRM needs to ignore them for > + * FP and DVI to be properly detected. > + */ > + bool is_via_nanobook; > + > + /* > + * Quanta IL1 netbook has its FP connected to DVP1 > + * rather than LVDS, hence, a special flag register > + * is needed for properly controlling its FP. > + */ > + bool is_quanta_il1; > + > + /* > + * Samsung NC20 netbook has its FP connected to LVDS2 > + * rather than the more logical LVDS1, hence, a special > + * flag register is needed for properly controlling its > + * FP. > + */ > + bool is_samsung_nc20; > + > + bool dac_presence; > + u32 dac_i2c_bus; > + > + bool int_tmds_presence; > + u32 int_tmds_di_port; > + u32 int_tmds_i2c_bus; > + > + bool ext_tmds_presence; > + u32 ext_tmds_di_port; > + u32 ext_tmds_i2c_bus; > + u32 ext_tmds_transmitter; > + > + bool int_fp1_presence; > + u32 int_fp1_di_port; > + u32 int_fp1_i2c_bus; > + > + bool int_fp2_presence; > + u32 int_fp2_di_port; > + u32 int_fp2_i2c_bus; > + > + /* Keeping track of the number of DVI connectors. */ > + u32 number_dvi; > + > + /* Keeping track of the number of FP (Flat Panel) connectors. */ > + u32 number_fp; > + > + u32 mapped_i2c_bus; > +}; > + > + > +/* > + * Shortcut for using container_of macro. > + */ > +#define to_via_drm_priv(x) container_of(x, struct via_drm_priv, dev) > +#define to_ttm_bo(x) container_of(x, struct via_bo, ttm_bo) > + > + > +/* VIA MMIO register access */ > +#define VIA_BASE ((dev_priv->mmio)) > + > +#define VIA_READ(reg) ioread32(VIA_BASE + reg) > +#define VIA_WRITE(reg, val) iowrite32(val, VIA_BASE + reg) > +#define VIA_READ8(reg) ioread8(VIA_BASE + reg) > +#define VIA_WRITE8(reg, val) iowrite8(val, VIA_BASE + reg) > + > +#define VIA_WRITE_MASK(reg, data, mask) \ > + VIA_WRITE(reg, (data & mask) | (VIA_READ(reg) & ~mask)) \ > + > +#define VGABASE (VIA_BASE+VIA_MMIO_VGABASE) > + > + > +static inline void > +via_lock_crtc(void __iomem *regs) > +{ > + svga_wcrt_mask(regs, 0x11, BIT(7), BIT(7)); > +} > + > +static inline void > +via_unlock_crtc(void __iomem *regs, int pci_id) > +{ > + u8 mask = BIT(0); > + > + svga_wcrt_mask(regs, 0x11, 0, BIT(7)); > + if ((pci_id == PCI_DEVICE_ID_VIA_VX875) || > + (pci_id == PCI_DEVICE_ID_VIA_VX900_VGA)) > + mask = BIT(4); > + svga_wcrt_mask(regs, 0x47, 0, mask); > +} > + > + > +extern int via_driver_num_ioctls; > + > +extern struct ttm_device_funcs via_bo_driver; > + > +int via_vram_detect(struct via_drm_priv *dev_priv); > +int via_vram_init(struct via_drm_priv *dev_priv); > +void via_vram_fini(struct via_drm_priv *dev_priv); > +int via_mmio_init(struct via_drm_priv *dev_priv); > +void via_mmio_fini(struct via_drm_priv *dev_priv); > +void via_graphics_unlock(struct via_drm_priv *dev_priv); > +void chip_revision_info(struct via_drm_priv *dev_priv); > +int via_device_init(struct via_drm_priv *dev_priv); > +void via_device_fini(struct via_drm_priv *dev_priv); > +void via_mode_config_init(struct via_drm_priv *dev_priv); > +int via_drm_init(struct drm_device *dev); > +void via_drm_fini(struct drm_device *dev); > + > +int via_dev_pm_ops_suspend(struct device *dev); > +int via_dev_pm_ops_resume(struct device *dev); > + > +void via_ttm_domain_to_placement(struct via_bo *bo, uint32_t ttm_domain); > +void via_ttm_bo_destroy(struct ttm_buffer_object *tbo); > +int via_bo_pin(struct via_bo *bo, uint32_t ttm_domain); > +void via_bo_unpin(struct via_bo *bo); > +int via_bo_create(struct drm_device *dev, struct ttm_device *bdev, > + uint64_t size, enum ttm_bo_type type, > + uint32_t ttm_domain, bool kmap, > + struct via_bo **bo_ptr); > +void via_bo_destroy(struct via_bo *bo, bool kmap); > +int via_mm_init(struct via_drm_priv *dev_priv); > +void via_mm_fini(struct via_drm_priv *dev_priv); > + > +void via_transmitter_io_pad_state(struct via_drm_priv *dev_priv, > + uint32_t di_port, bool io_pad_on); > +void via_transmitter_clock_drive_strength(struct via_drm_priv *dev_priv, > + u32 di_port, u8 drive_strength); > +void via_transmitter_data_drive_strength(struct via_drm_priv *dev_priv, > + u32 di_port, u8 drive_strength); > +void via_transmitter_display_source(struct via_drm_priv *dev_priv, > + u32 di_port, int index); > + > +extern const struct drm_plane_helper_funcs via_cursor_drm_plane_helper_funcs; > +extern const struct drm_plane_funcs via_cursor_drm_plane_funcs; > +extern const uint32_t via_cursor_formats[]; > +extern const unsigned int via_cursor_formats_size; > + > +/* display */ > +int via_modeset_init(struct drm_device *dev); > +void via_modeset_fini(struct drm_device *dev); > + > +/* i2c */ > +struct i2c_adapter *via_find_ddc_bus(int port); > +void via_i2c_readbytes(struct i2c_adapter *adapter, > + u8 slave_addr, char offset, > + u8 *buffer, unsigned int size); > +void via_i2c_writebytes(struct i2c_adapter *adapter, > + u8 slave_addr, char offset, > + u8 *data, unsigned int size); > +void via_i2c_reg_init(struct via_drm_priv *dev_priv); > +int via_i2c_init(struct drm_device *dev); > +void via_i2c_exit(void); > + > +/* clock */ > +u32 via_get_clk_value(struct drm_device *dev, u32 clk); > +void via_set_vclock(struct drm_crtc *crtc, u32 clk); > + > +/* crtc */ > +void via_load_crtc_pixel_timing(struct drm_crtc *crtc, > + struct drm_display_mode *mode); > +int via_crtc_init(struct via_drm_priv *dev_priv, uint32_t index); > + > +/* encoders */ > +void via_encoder_cleanup(struct drm_encoder *encoder); > + > +/* connectors */ > +void via_connector_destroy(struct drm_connector *connector); > + > +void via_dac_probe(struct drm_device *dev); > +bool via_vt1632_probe(struct i2c_adapter *i2c_bus); > +bool via_sii164_probe(struct i2c_adapter *i2c_bus); > +void via_ext_dvi_probe(struct drm_device *dev); > +void via_tmds_probe(struct drm_device *dev); > +void via_lvds_probe(struct drm_device *dev); > + > +void via_hdmi_init(struct drm_device *dev, u32 di_port); > +void via_dac_init(struct drm_device *dev); > +void via_vt1632_init(struct drm_device *dev); > +void via_sii164_init(struct drm_device *dev); > +void via_ext_dvi_init(struct drm_device *dev); > +void via_tmds_init(struct drm_device *dev); > +void via_lvds_init(struct drm_device *dev); > + > +#endif /* _VIA_DRV_H */ > -- > 2.35.1 > -- Jani Nikula, Intel Open Source Graphics Center ^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH 05/28] drm/via: Add via_regs.h 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (3 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 04/28] drm/via: Add via_drv.h Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 06/28] drm/via: Add via_crtc.c Kevin Brace ` (15 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Likely originated from VIA Technologies. Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_regs.h | 296 +++++++++++++++++++++++++++++++++ 1 file changed, 296 insertions(+) create mode 100644 drivers/gpu/drm/via/via_regs.h diff --git a/drivers/gpu/drm/via/via_regs.h b/drivers/gpu/drm/via/via_regs.h new file mode 100644 index 000000000000..5ac06d75f0b5 --- /dev/null +++ b/drivers/gpu/drm/via/via_regs.h @@ -0,0 +1,296 @@ +/* + * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2009 S3 Graphics, Inc. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + */ + +/************************************************************************* + * + * File: via_regs.h + * Content: The defines of VIA Technologies Chrome registers. + * + ************************************************************************/ + +#ifndef _VIA_REGS_H_ +#define _VIA_REGS_H_ 1 + +#define BIOS_BSIZE 1024 +#define BIOS_BASE 0xc0000 + +#define VIA_MMIO_REGSIZE 0xD000 /* DisplayPort:0xC610~0xC7D4 */ +#define VIA_MMIO_REGBASE 0x0 +#define VIA_MMIO_VGABASE 0x8000 +#define VIA_MMIO_BLTBASE 0x200000 +#define VIA_MMIO_BLTSIZE 0x200000 + +/* defines for VIA 2D registers */ +#define VIA_REG_GECMD 0x000 +#define VIA_REG_GEMODE 0x004 +#define VIA_REG_GESTATUS 0x004 /* as same as VIA_REG_GEMODE */ +#define VIA_REG_SRCPOS 0x008 +#define VIA_REG_DSTPOS 0x00C +#define VIA_REG_LINE_K1K2 0x008 +#define VIA_REG_LINE_XY 0x00C +#define VIA_REG_DIMENSION 0x010 /* width and height */ +#define VIA_REG_PATADDR 0x014 +#define VIA_REG_FGCOLOR 0x018 +#define VIA_REG_DSTCOLORKEY 0x018 /* as same as VIA_REG_FG */ +#define VIA_REG_BGCOLOR 0x01C +#define VIA_REG_SRCCOLORKEY 0x01C /* as same as VIA_REG_BG */ +#define VIA_REG_CLIPTL 0x020 /* top and left of clipping */ +#define VIA_REG_CLIPBR 0x024 /* bottom and right of clipping */ +#define VIA_REG_OFFSET 0x028 +#define VIA_REG_LINE_ERROR 0x028 +#define VIA_REG_KEYCONTROL 0x02C /* color key control */ +#define VIA_REG_SRCBASE 0x030 +#define VIA_REG_DSTBASE 0x034 +#define VIA_REG_PITCH 0x038 /* pitch of src and dst */ +#define VIA_REG_MONOPAT0 0x03C +#define VIA_REG_MONOPAT1 0x040 +#define VIA_REG_COLORPAT 0x100 /* from 0x100 to 0x1ff */ + +/* defineds vor VIA 2D registers for VT3353 (M1 engine) */ +#define VIA_REG_GECMD_M1 0x000 +#define VIA_REG_GEMODE_M1 0x004 +#define VIA_REG_GESTATUS_M1 0x004 /* as same as VIA_REG_GEMODE */ +#define VIA_REG_PITCH_M1 0x008 /* pitch of src and dst */ +#define VIA_REG_DIMENSION_M1 0x00C /* width and height */ +#define VIA_REG_DSTPOS_M1 0x010 +#define VIA_REG_LINE_XY_M1 0x010 +#define VIA_REG_DSTBASE_M1 0x014 +#define VIA_REG_SRCPOS_M1 0x018 +#define VIA_REG_LINE_K1K2_M1 0x018 +#define VIA_REG_SRCBASE_M1 0x01C +#define VIA_REG_PATADDR_M1 0x020 +#define VIA_REG_MONOPAT0_M1 0x024 +#define VIA_REG_MONOPAT1_M1 0x028 +#define VIA_REG_OFFSET_M1 0x02C +#define VIA_REG_LINE_ERROR_M1 0x02C +#define VIA_REG_CLIPTL_M1 0x040 /* top and left of clipping */ +#define VIA_REG_CLIPBR_M1 0x044 /* bottom and right of clipping */ +#define VIA_REG_KEYCONTROL_M1 0x048 /* color key control */ +#define VIA_REG_FGCOLOR_M1 0x04C +#define VIA_REG_DSTCOLORKEY_M1 0x04C /* as same as VIA_REG_FG */ +#define VIA_REG_BGCOLOR_M1 0x050 +#define VIA_REG_SRCCOLORKEY_M1 0x050 /* as same as VIA_REG_BG */ +#define VIA_REG_MONOPATFGC_M1 0x058 /* Add foreground color of Pattern */ +#define VIA_REG_MONOPATBGC_M1 0x05C /* Add background color of Pattern */ +#define VIA_REG_COLORPAT_M1 0x100 /* from 0x100 to 0x1ff */ + +/* defines for VIA video registers */ +#define VIA_REG_INTERRUPT 0x200 +#define VIA_REG_CRTCSTART 0x214 + +/*CN400 and older Hardware Icon engine register*/ +#define HI_POSSTART 0x208 +#define HI_CENTEROFFSET 0x20C +#define HI_FBOFFSET 0x224 +#define HI_CONTROL 0x260 +#define HI_TRANSPARENT_COLOR 0x270 +#define HI_INVTCOLOR 0x274 +/* VT3324 primary Hardware Icon engine register */ +#define PRIM_HI_POSEND 0x290 +#define V327_HI_INVTCOLOR 0x2E4 +#define PRIM_HI_FIFO 0x2E8 +#define PRIM_HI_TRANSCOLOR 0x2EC +#define PRIM_HI_CTRL 0x2F0 +#define PRIM_HI_FBOFFSET 0x2F4 +#define PRIM_HI_POSSTART 0x2F8 +#define PRIM_HI_CENTEROFFSET 0x2FC +#define PRIM_HI_INVTCOLOR 0x120C + +#define ALPHA_V3_PREFIFO_CONTROL 0x268 +#define ALPHA_V3_FIFO_CONTROL 0x278 + +/* defines for VIA 3D registers */ +#define VIA_REG_STATUS 0x400 +#define VIA_REG_TRANSET 0x43C +#define VIA_REG_TRANSPACE 0x440 + +/* VIA_REG_STATUS(0x400): Engine Status */ +#define VIA_CMD_RGTR_BUSY 0x00000080 /* Command Regulator is busy */ +#define VIA_2D_ENG_BUSY 0x00000002 /* 2D Engine is busy */ +#define VIA_3D_ENG_BUSY 0x00000001 /* 3D Engine is busy */ +#define VIA_VR_QUEUE_EMPTY 0x00020000 /* Virtual Queue is busy */ + +/* VIA_REG_STATUS(0x400): Egine Status */ +#define VIA_CMD_RGTR_BUSY_H5 0x00000010 /* Command Regulator is busy */ +#define VIA_2D_ENG_BUSY_H5 0x00000002 /* 2D Engine is busy */ +#define VIA_3D_ENG_BUSY_H5 0x00001FE1 /* 3D Engine is busy */ +#define VIA_VR_QUEUE_BUSY_H5 0x00000004 /* Virtual Queue is busy */ + +/* VIA_REG_GECMD(0x00): 2D Engine Command */ +#define VIA_GEC_NOOP 0x00000000 +#define VIA_GEC_BLT 0x00000001 +#define VIA_GEC_LINE 0x00000005 + +#define VIA_GEC_SRC_XY 0x00000000 +#define VIA_GEC_SRC_LINEAR 0x00000010 +#define VIA_GEC_DST_XY 0x00000000 +#define VIA_GEC_DST_LINRAT 0x00000020 + +#define VIA_GEC_SRC_FB 0x00000000 +#define VIA_GEC_SRC_SYS 0x00000040 +#define VIA_GEC_DST_FB 0x00000000 +#define VIA_GEC_DST_SYS 0x00000080 + +#define VIA_GEC_SRC_MONO 0x00000100 /* source is mono */ +#define VIA_GEC_PAT_MONO 0x00000200 /* pattern is mono */ + +#define VIA_GEC_MSRC_OPAQUE 0x00000000 /* mono src is opaque */ +#define VIA_GEC_MSRC_TRANS 0x00000400 /* mono src is transparent */ + +#define VIA_GEC_PAT_FB 0x00000000 /* pattern is in frame buffer */ +#define VIA_GEC_PAT_REG 0x00000800 /* pattern is from reg setting */ + +#define VIA_GEC_CLIP_DISABLE 0x00000000 +#define VIA_GEC_CLIP_ENABLE 0x00001000 + +#define VIA_GEC_FIXCOLOR_PAT 0x00002000 + +#define VIA_GEC_INCX 0x00000000 +#define VIA_GEC_DECY 0x00004000 +#define VIA_GEC_INCY 0x00000000 +#define VIA_GEC_DECX 0x00008000 + +#define VIA_GEC_MPAT_OPAQUE 0x00000000 /* mono pattern is opaque */ +#define VIA_GEC_MPAT_TRANS 0x00010000 /* mono pattern is transparent */ + +#define VIA_GEC_MONO_UNPACK 0x00000000 +#define VIA_GEC_MONO_PACK 0x00020000 +#define VIA_GEC_MONO_DWORD 0x00000000 +#define VIA_GEC_MONO_WORD 0x00040000 +#define VIA_GEC_MONO_BYTE 0x00080000 + +#define VIA_GEC_LASTPIXEL_ON 0x00000000 +#define VIA_GEC_LASTPIXEL_OFF 0x00100000 +#define VIA_GEC_X_MAJOR 0x00000000 +#define VIA_GEC_Y_MAJOR 0x00200000 +#define VIA_GEC_QUICK_START 0x00800000 + + +/* VIA_REG_GEMODE(0x04): GE mode */ +#define VIA_GEM_8bpp 0x00000000 +#define VIA_GEM_16bpp 0x00000100 +#define VIA_GEM_32bpp 0x00000300 + +#define VIA_GEM_640 0x00000000 /* 640*480 */ +#define VIA_GEM_800 0x00000400 /* 800*600 */ +#define VIA_GEM_1024 0x00000800 /* 1024*768 */ +#define VIA_GEM_1280 0x00000C00 /* 1280*1024 */ +#define VIA_GEM_1600 0x00001000 /* 1600*1200 */ +#define VIA_GEM_2048 0x00001400 /* 2048*1536 */ + +/* VIA_REG_PITCH(0x38): Pitch Setting */ +#define VIA_PITCH_ENABLE 0x80000000 + +/* CN400 HQV offset */ +#define REG_HQV1_INDEX 0x00001000 + +/************************************************ + * DisplayPort Register + ************************************************/ +#define DP_DATA_PASS_ENABLE_REG 0xC000 + +#define DP_ATTR_DATA_REG 0xC610 +#define DP_LINK_TRAINING_REG 0xC614 +#define DP_VIDEO_CTRL_REG 0xC618 +#define DP_VER_EXT_PKT_HEAD_REG 0xC61C + +/* DP Display Port Enable and InfoFrame Control */ +#define DP_ENABLE_IF_REG 0xC640 +#define DP_HWIDTH_TUSIZE_REG 0xC644 +#define DP_HLINE_DUR_REG 0xC648 +#define DP_MVID_MISC0_REG 0xC64C + +#define DP_H_ATTR_REG 0xC650 +#define DP_HV_START_REG 0xC654 +#define DP_POLARITY_WIDTH_REG 0xC658 +#define DP_ACITVE_WH_REG 0xC65C + +#define AUX_W_DATA0_REG 0xC710 +#define AUX_W_DATA1_REG 0xC714 +#define AUX_W_DATA2_REG 0xC718 +#define AUX_W_DATA3_REG 0xC71C + +#define AUX_R_DATA0_REG 0xC720 +#define AUX_R_DATA1_REG 0xC724 +#define AUX_R_DATA2_REG 0xC728 +#define AUX_R_DATA3_REG 0xC72C +#define VIA_IRQ_DP_HOT_IRQ 0xC0000000 +#define VIA_IRQ_DP_HOT_UNPLUG 0x80000000 +#define VIA_IRQ_DP_HOT_PLUG 0x40000000 +#define VIA_IRQ_DP_NO_INT 0x00000000 + +#define AUX_TIMER_REG 0xC730 +#define AUX_CMD_REG 0xC734 +#define DP_NAUD_MUTE_REG 0xC738 + +#define DP_EPHY_PLL_REG 0xC740 +#define DP_EPHY_TX_PWR_REG 0xC744 +#define DP_EPHY_MISC_PWR_REG 0xC748 + +/************************************************* + * DisplayPort2 Register + *************************************************/ +#define DP2_NVID_MISC0_REG 0xC690 +#define DP2_LINK_TRAINING_REG 0xC694 +#define DP2_VIDEO_CTRL_REG 0xC698 +#define DP2_EXT_REG 0xC69C +#define DP2_VER_EXT_PKT_HEAD_REG 0xC61C + +/* DP2 Display Port Enable and InfoFrame Control */ +#define DP2_ENABLE_IF_REG 0xC6C0 +#define DP2_HWIDTH_TUSIZE_REG 0xC6C4 +#define DP2_HLINE_DUR_REG 0xC6C8 +#define DP2_MVID_MISC0_REG 0xC6CC + +#define DP2_H_ATTR_REG 0xC6D0 +#define DP2_HV_START_REG 0xC6D4 +#define DP2_POLARITY_WIDTH_REG 0xC6D8 +#define DP2_ACITVE_WH_REG 0xC6DC + +/* the same with DP1 */ +#define DP2_EPHY_SSC_REG 0xC740 +/* the same with DP1 */ +#define DP2_EPHY_RT_REG 0xC744 + +#define DP2_AUX_W_DATA0_REG 0xC790 +#define DP2_AUX_W_DATA1_REG 0xC794 +#define DP2_AUX_W_DATA2_REG 0xC798 +#define DP2_AUX_W_DATA3_REG 0xC79C + +#define DP2_AUX_R_DATA0_REG 0xC7A0 +#define DP2_AUX_R_DATA1_REG 0xC7A4 +#define DP2_AUX_R_DATA2_REG 0xC7A8 +#define DP2_AUX_R_DATA3_REG 0xC7AC + +#define DP2_AUX_TIMER_REG 0xC7B0 +#define DP2_AUX_CMD_REG 0xC7B4 +#define DP2_NAUD_MUTE_REG 0xC7B8 + +#define DP2_EPHY_TX_PWR_REG2 0xC7C0 +#define DP2_EPHY_TX_IDLE_REG 0xC7C4 +#define DP2_EPHY_TX_PWR_REG 0xC7C8 +#define DP2_EPHY_PLL_REG 0xC7CC + +#endif /* _VIA_REGS_H_ */ -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 06/28] drm/via: Add via_crtc.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (4 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 05/28] drm/via: Add via_regs.h Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 07/28] drm/via: Add via_crtc_hw.c Kevin Brace ` (14 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_crtc.c | 2324 ++++++++++++++++++++++++++++++++ 1 file changed, 2324 insertions(+) create mode 100644 drivers/gpu/drm/via/via_crtc.c diff --git a/drivers/gpu/drm/via/via_crtc.c b/drivers/gpu/drm/via/via_crtc.c new file mode 100644 index 000000000000..afd42bd99f25 --- /dev/null +++ b/drivers/gpu/drm/via/via_crtc.c @@ -0,0 +1,2324 @@ +/* + * Copyright © 2019-2020 Kevin Brace. + * Copyright 2012 James Simmons. All Rights Reserved. + * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2009 S3 Graphics, Inc. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * Kevin Brace <kevinbrace@bracecomputerlab.com> + * James Simmons <jsimmons@infradead.org> + */ + +#include <linux/pci.h> +#include <linux/pci_ids.h> + +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_fourcc.h> +#include <drm/drm_gem.h> +#include <drm/drm_mode.h> +#include <drm/drm_modeset_helper_vtables.h> +#include <drm/drm_plane.h> +#include <drm/drm_plane_helper.h> + +#include <drm/ttm/ttm_bo_api.h> + +#include "via_drv.h" +#include "via_disp_reg.h" + + +static struct vga_regset vpit_table[] = { + {VGA_SEQ_I, 0x01, 0xFF, 0x01 }, + {VGA_SEQ_I, 0x02, 0xFF, 0x0F }, + {VGA_SEQ_I, 0x03, 0xFF, 0x00 }, + {VGA_SEQ_I, 0x04, 0xFF, 0x0E }, + {VGA_GFX_I, 0x00, 0xFF, 0x00 }, + {VGA_GFX_I, 0x01, 0xFF, 0x00 }, + {VGA_GFX_I, 0x02, 0xFF, 0x00 }, + {VGA_GFX_I, 0x03, 0xFF, 0x00 }, + {VGA_GFX_I, 0x04, 0xFF, 0x00 }, + {VGA_GFX_I, 0x05, 0xFF, 0x00 }, + {VGA_GFX_I, 0x06, 0xFF, 0x05 }, + {VGA_GFX_I, 0x07, 0xFF, 0x0F }, + {VGA_GFX_I, 0x08, 0xFF, 0xFF } +}; + +static void via_iga_common_init(void __iomem *regs) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* Be careful with 3C5.15[5] - Wrap Around Disable. + * It must be set to 1 for proper operation. */ + /* 3C5.15[5] - Wrap Around Disable + * 0: Disable (For Mode 0-13) + * 1: Enable + * 3C5.15[1] - Extended Display Mode Enable + * 0: Disable + * 1: Enable */ + svga_wseq_mask(regs, 0x15, BIT(5) | BIT(1), BIT(5) | BIT(1)); + + /* + * Disable simultaneous display. + * Turning this on causes IGA1 to have a display issue. + */ + /* + * 3X5.6B[3] - Simultaneous Display Enable + * 0: Disable + * 1: Enable + */ + svga_wcrt_mask(regs, 0x6B, 0x00, BIT(3)); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_iga1_set_color_depth(struct via_drm_priv *dev_priv, + u8 depth) +{ + u8 value; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + value = 0x00; + + /* Set the color depth for IGA1. */ + switch (depth) { + case 8: + break; + case 16: + /* Bit 4 is for 555 (15-bit) / 565 (16-bit) color selection. */ + value |= BIT(4) | BIT(2); + break; + case 24: + value |= BIT(3) | BIT(2); + break; + default: + break; + } + + if ((depth == 8) || (depth == 16) || (depth == 24)) { + /* 3C5.15[4] - Hi Color Mode Select + * 0: 555 + * 1: 565 + * 3C5.15[3:2] - Display Color Depth Select + * 00: 8bpp + * 01: 16bpp + * 10: 30bpp + * 11: 32bpp */ + svga_wseq_mask(VGABASE, 0x15, value, + BIT(4) | BIT(3) | BIT(2)); + DRM_INFO("IGA1 Color Depth: %d bit\n", depth); + } else { + DRM_ERROR("Unsupported IGA1 Color Depth: %d bit\n", + depth); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_iga2_set_color_depth(struct via_drm_priv *dev_priv, + u8 depth) +{ + u8 value; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + value = 0x00; + + /* Set the color depth for IGA2. */ + switch (depth) { + case 8: + break; + case 16: + value = BIT(6); + break; + case 24: + value = BIT(7) | BIT(6); + break; + default: + break; + } + + if ((depth == 8) || (depth == 16) || (depth == 24)) { + /* 3X5.67[7:6] - Display Color Depth Select + * 00: 8bpp + * 01: 16bpp + * 10: 30bpp + * 11: 32bpp */ + svga_wcrt_mask(VGABASE, 0x67, value, 0xC0); + DRM_INFO("IGA2 Color Depth: %d bit\n", depth); + } else { + DRM_ERROR("Unsupported IGA2 Color Depth: %d bit\n", + depth); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static int via_gamma_set(struct drm_crtc *crtc, + u16 *r, u16 *g, u16 *b, + uint32_t size, + struct drm_modeset_acquire_ctx *ctx) +{ + struct drm_device *dev = crtc->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct via_crtc *iga = container_of(crtc, + struct via_crtc, base); + int end = (size > 256) ? 256 : size, i; + u8 val = 0; + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if ((!crtc->enabled) || (!crtc->primary->fb)) { + ret = -EINVAL; + goto exit; + } + + if (!iga->index) { + /* + * Access IGA1's pallette LUT. + */ + svga_wseq_mask(VGABASE, 0x1A, 0x00, BIT(0)); + + /* + * Is it an 8-bit color mode? + */ + if (crtc->primary->fb->format->cpp[0] == 1) { + /* Change to Primary Display's LUT */ + val = vga_rseq(VGABASE, 0x1B); + vga_wseq(VGABASE, 0x1B, val); + val = vga_rcrt(VGABASE, 0x67); + vga_wcrt(VGABASE, 0x67, val); + + /* Fill in IGA1's LUT */ + for (i = 0; i < end; i++) { + /* Bit mask of palette */ + vga_w(VGABASE, VGA_PEL_MSK, 0xFF); + vga_w(VGABASE, VGA_PEL_IW, i); + vga_w(VGABASE, VGA_PEL_D, r[i] >> 8); + vga_w(VGABASE, VGA_PEL_D, g[i] >> 8); + vga_w(VGABASE, VGA_PEL_D, b[i] >> 8); + } + /* enable LUT */ + svga_wseq_mask(VGABASE, 0x1B, 0x00, BIT(0)); + /* + * Disable gamma in case it was enabled + * previously + */ + svga_wcrt_mask(VGABASE, 0x33, 0x00, BIT(7)); + } else { + /* Enable Gamma */ + svga_wcrt_mask(VGABASE, 0x33, BIT(7), BIT(7)); + + /* Fill in IGA1's gamma */ + for (i = 0; i < end; i++) { + /* bit mask of palette */ + vga_w(VGABASE, VGA_PEL_MSK, 0xFF); + vga_w(VGABASE, VGA_PEL_IW, i); + vga_w(VGABASE, VGA_PEL_D, r[i] >> 8); + vga_w(VGABASE, VGA_PEL_D, g[i] >> 8); + vga_w(VGABASE, VGA_PEL_D, b[i] >> 8); + } + } + } else { + /* + * Access IGA2's pallette LUT. + */ + svga_wseq_mask(VGABASE, 0x1A, BIT(0), BIT(0)); + + /* + * Is it an 8-bit color mode? + */ + if (crtc->primary->fb->format->cpp[0] == 1) { + /* Enable Secondary Display Engine */ + svga_wseq_mask(VGABASE, 0x1B, BIT(7), BIT(7)); + /* Second Display Color Depth, 8bpp */ + svga_wcrt_mask(VGABASE, 0x67, 0x3F, 0x3F); + + /* + * Enable second display channel just in case. + */ + if (!(vga_rcrt(VGABASE, 0x6A) & BIT(7))) + svga_wcrt_mask(VGABASE, 0x6A, + BIT(7), BIT(7)); + + /* Fill in IGA2's LUT */ + for (i = 0; i < end; i++) { + /* Bit mask of palette */ + vga_w(VGABASE, VGA_PEL_MSK, 0xFF); + vga_w(VGABASE, VGA_PEL_IW, i); + vga_w(VGABASE, VGA_PEL_D, r[i] >> 8); + vga_w(VGABASE, VGA_PEL_D, g[i] >> 8); + vga_w(VGABASE, VGA_PEL_D, b[i] >> 8); + } + /* + * Disable gamma in case it was enabled + * previously + */ + svga_wcrt_mask(VGABASE, 0x6A, 0x00, BIT(1)); + } else { + u8 reg_bits = BIT(1); + + /* Bit 1 enables gamma */ + svga_wcrt_mask(VGABASE, 0x6A, BIT(1), BIT(1)); + + /* Old platforms LUT are 6 bits in size. + * Newer it is 8 bits. */ + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_CLE266: + case PCI_DEVICE_ID_VIA_KM400: + case PCI_DEVICE_ID_VIA_K8M800: + case PCI_DEVICE_ID_VIA_PM800: + break; + + default: + reg_bits |= BIT(5); + break; + } + svga_wcrt_mask(VGABASE, 0x6A, reg_bits, + reg_bits); + + /* + * Before we fill the second LUT, we have to + * enable second display channel. If it's + * enabled before, we don't need to do that, + * or else the secondary display will be dark + * for about 1 sec and then be turned on + * again. + */ + if (!(vga_rcrt(VGABASE, 0x6A) & BIT(7))) + svga_wcrt_mask(VGABASE, 0x6A, + BIT(7), BIT(7)); + + /* Fill in IGA2's gamma */ + for (i = 0; i < end; i++) { + /* bit mask of palette */ + vga_w(VGABASE, VGA_PEL_MSK, 0xFF); + vga_w(VGABASE, VGA_PEL_IW, i); + vga_w(VGABASE, VGA_PEL_D, r[i] >> 8); + vga_w(VGABASE, VGA_PEL_D, g[i] >> 8); + vga_w(VGABASE, VGA_PEL_D, b[i] >> 8); + } + } + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static void via_crtc_destroy(struct drm_crtc *crtc) +{ + struct via_crtc *iga = container_of(crtc, struct via_crtc, base); + + drm_crtc_cleanup(&iga->base); + kfree(iga); +} + +static const struct drm_crtc_funcs via_drm_crtc_funcs = { + .reset = drm_atomic_helper_crtc_reset, + .gamma_set = via_gamma_set, + .set_config = drm_atomic_helper_set_config, + .destroy = via_crtc_destroy, + .page_flip = drm_atomic_helper_page_flip, + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, +}; + +static void via_load_vpit_regs(struct via_drm_priv *dev_priv) +{ + u8 ar[] = {0x00, 0x01, 0x02, 0x03, + 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0A, 0x0B, + 0x0C, 0x0D, 0x0E, 0x0F, + 0x01, 0x00, 0x0F, 0x00}; + struct vga_registers vpit_regs; + unsigned int i = 0; + u8 reg_value = 0; + + /* Enable changing the palette registers */ + reg_value = vga_r(VGABASE, VGA_IS1_RC); + vga_w(VGABASE, VGA_ATT_W, 0x00); + + /* Write Misc register */ + vga_w(VGABASE, VGA_MIS_W, 0xCF); + + /* Fill VPIT registers */ + vpit_regs.count = ARRAY_SIZE(vpit_table); + vpit_regs.regs = vpit_table; + load_register_tables(VGABASE, &vpit_regs); + + /* Write Attribute Controller */ + for (i = 0; i < 0x14; i++) { + reg_value = vga_r(VGABASE, VGA_IS1_RC); + vga_w(VGABASE, VGA_ATT_W, i); + vga_w(VGABASE, VGA_ATT_W, ar[i]); + } + + /* Disable changing the palette registers */ + reg_value = vga_r(VGABASE, VGA_IS1_RC); + vga_w(VGABASE, VGA_ATT_W, BIT(5)); +} + +static int via_iga1_display_fifo_regs(struct drm_device *dev, + struct via_drm_priv *dev_priv, + struct via_crtc *iga, + struct drm_display_mode *mode, + struct drm_framebuffer *fb) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + u32 reg_value; + unsigned int fifo_max_depth = 0; + unsigned int fifo_threshold = 0; + unsigned int fifo_high_threshold = 0; + unsigned int display_queue_expire_num = 0; + bool enable_extended_display_fifo = false; + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_CLE266: + if (dev_priv->revision == CLE266_REVISION_AX) { + if (mode->hdisplay > 1024) { + /* SR17[6:0] */ + fifo_max_depth = 96; + + /* SR16[5:0] */ + fifo_threshold = 92; + + /* SR18[5:0] */ + fifo_high_threshold = 92; + + enable_extended_display_fifo = true; + } else { + /* SR17[6:0] */ + fifo_max_depth = 64; + + /* SR16[5:0] */ + fifo_threshold = 32; + + /* SR18[5:0] */ + fifo_high_threshold = 56; + + enable_extended_display_fifo = false; + } + + if (dev_priv->vram_type <= VIA_MEM_DDR_200) { + if (fb->format->depth == 24) { + if (mode->hdisplay > 1024) { + if (mode->vdisplay > 768) { + /* SR22[4:0] */ + display_queue_expire_num = 16; + } else { + /* SR22[4:0] */ + display_queue_expire_num = 12; + } + } else if (mode->hdisplay > 640) { + /* SR22[4:0] */ + display_queue_expire_num = 40; + } else { + /* SR22[4:0] */ + display_queue_expire_num = 124; + } + } else if (fb->format->depth == 16){ + if (mode->hdisplay > 1400) { + /* SR22[4:0] */ + display_queue_expire_num = 16; + } else { + /* SR22[4:0] */ + display_queue_expire_num = 12; + } + } else { + /* SR22[4:0] */ + display_queue_expire_num = 124; + } + } else { + if (mode->hdisplay > 1280) { + /* SR22[4:0] */ + display_queue_expire_num = 16; + } else if (mode->hdisplay > 1024) { + /* SR22[4:0] */ + display_queue_expire_num = 12; + } else { + /* SR22[4:0] */ + display_queue_expire_num = 124; + } + } + /* dev_priv->revision == CLE266_REVISION_CX */ + } else { + if (mode->hdisplay >= 1024) { + /* SR17[6:0] */ + fifo_max_depth = 128; + + /* SR16[5:0] */ + fifo_threshold = 112; + + /* SR18[5:0] */ + fifo_high_threshold = 92; + + enable_extended_display_fifo = false; + } else { + /* SR17[6:0] */ + fifo_max_depth = 64; + + /* SR16[5:0] */ + fifo_threshold = 32; + + /* SR18[5:0] */ + fifo_high_threshold = 56; + + enable_extended_display_fifo = false; + } + + if (dev_priv->vram_type <= VIA_MEM_DDR_200) { + if (mode->hdisplay > 1024) { + if (mode->vdisplay > 768) { + /* SR22[4:0] */ + display_queue_expire_num = 16; + } else { + /* SR22[4:0] */ + display_queue_expire_num = 12; + } + } else if (mode->hdisplay > 640) { + /* SR22[4:0] */ + display_queue_expire_num = 40; + } else { + /* SR22[4:0] */ + display_queue_expire_num = 124; + } + } else { + if (mode->hdisplay >= 1280) { + /* SR22[4:0] */ + display_queue_expire_num = 16; + } else { + /* SR22[4:0] */ + display_queue_expire_num = 124; + } + } + } + break; + + case PCI_DEVICE_ID_VIA_KM400: + if ((mode->hdisplay >= 1600) && + (dev_priv->vram_type <= VIA_MEM_DDR_200)) { + /* SR17[6:0] */ + fifo_max_depth = 58; + + /* SR16[5:0] */ + fifo_threshold = 24; + + /* SR18[5:0] */ + fifo_high_threshold = 92; + } else { + /* SR17[6:0] */ + fifo_max_depth = 128; + + /* SR16[5:0] */ + fifo_threshold = 112; + + /* SR18[5:0] */ + fifo_high_threshold = 92; + } + + enable_extended_display_fifo = false; + + if (dev_priv->vram_type <= VIA_MEM_DDR_200) { + if (mode->hdisplay >= 1600) { + /* SR22[4:0] */ + display_queue_expire_num = 16; + } else { + /* SR22[4:0] */ + display_queue_expire_num = 8; + } + } else { + if (mode->hdisplay >= 1600) { + /* SR22[4:0] */ + display_queue_expire_num = 40; + } else { + /* SR22[4:0] */ + display_queue_expire_num = 36; + } + } + + break; + case PCI_DEVICE_ID_VIA_K8M800: + /* SR17[7:0] */ + fifo_max_depth = 384; + + /* SR16[7], SR16[5:0] */ + fifo_threshold = 328; + + /* SR18[7], SR18[5:0] */ + fifo_high_threshold = 296; + + if ((fb->format->depth == 24) && + (mode->hdisplay >= 1400)) { + /* SR22[4:0] */ + display_queue_expire_num = 64; + } else { + /* SR22[4:0] */ + display_queue_expire_num = 128; + } + + break; + case PCI_DEVICE_ID_VIA_PM800: + /* SR17[7:0] */ + fifo_max_depth = 192; + + /* SR16[7], SR16[5:0] */ + fifo_threshold = 128; + + /* SR18[7], SR18[5:0] */ + fifo_high_threshold = 64; + + if ((fb->format->depth == 24) && + (mode->hdisplay >= 1400)) { + /* SR22[4:0] */ + display_queue_expire_num = 64; + } else { + /* SR22[4:0] */ + display_queue_expire_num = 124; + } + + break; + case PCI_DEVICE_ID_VIA_CN700: + /* SR17[7:0] */ + fifo_max_depth = CN700_IGA1_FIFO_MAX_DEPTH; + + /* SR16[7], SR16[5:0] */ + fifo_threshold = CN700_IGA1_FIFO_THRESHOLD; + + /* SR18[7], SR18[5:0] */ + fifo_high_threshold = CN700_IGA1_FIFO_HIGH_THRESHOLD; + + /* SR22[4:0] */ + display_queue_expire_num = CN700_IGA1_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* CX700 */ + case PCI_DEVICE_ID_VIA_VT3157: + /* SR17[7:0] */ + fifo_max_depth = CX700_IGA1_FIFO_MAX_DEPTH; + + /* SR16[7], SR16[5:0] */ + fifo_threshold = CX700_IGA1_FIFO_THRESHOLD; + + /* SR18[7], SR18[5:0] */ + fifo_high_threshold = CX700_IGA1_FIFO_HIGH_THRESHOLD; + + /* SR22[4:0] */ + display_queue_expire_num = CX700_IGA1_DISPLAY_QUEUE_EXPIRE_NUM; + break; + + /* K8M890 */ + case PCI_DEVICE_ID_VIA_K8M890: + /* SR17[7:0] */ + fifo_max_depth = K8M890_IGA1_FIFO_MAX_DEPTH; + + /* SR16[7], SR16[5:0] */ + fifo_threshold = K8M890_IGA1_FIFO_THRESHOLD; + + /* SR18[7], SR18[5:0] */ + fifo_high_threshold = K8M890_IGA1_FIFO_HIGH_THRESHOLD; + + /* SR22[4:0] */ + display_queue_expire_num = K8M890_IGA1_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* P4M890 */ + case PCI_DEVICE_ID_VIA_VT3343: + /* SR17[7:0] */ + fifo_max_depth = P4M890_IGA1_FIFO_MAX_DEPTH; + + /* SR16[7], SR16[5:0] */ + fifo_threshold = P4M890_IGA1_FIFO_THRESHOLD; + + /* SR18[7], SR18[5:0] */ + fifo_high_threshold = P4M890_IGA1_FIFO_HIGH_THRESHOLD; + + /* SR22[4:0] */ + display_queue_expire_num = P4M890_IGA1_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* P4M900 */ + case PCI_DEVICE_ID_VIA_P4M900: + /* SR17[7:0] */ + fifo_max_depth = P4M900_IGA1_FIFO_MAX_DEPTH; + + /* SR16[7], SR16[5:0] */ + fifo_threshold = P4M900_IGA1_FIFO_THRESHOLD; + + /* SR18[7], SR18[5:0] */ + fifo_high_threshold = P4M900_IGA1_FIFO_HIGH_THRESHOLD; + + /* SR22[4:0] */ + display_queue_expire_num = P4M900_IGA1_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* VX800 */ + case PCI_DEVICE_ID_VIA_VT1122: + /* SR17[7:0] */ + fifo_max_depth = VX800_IGA1_FIFO_MAX_DEPTH; + + /* SR16[7], SR16[5:0] */ + fifo_threshold = VX800_IGA1_FIFO_THRESHOLD; + + /* SR18[7], SR18[5:0] */ + fifo_high_threshold = VX800_IGA1_FIFO_HIGH_THRESHOLD; + + /* SR22[4:0] */ + display_queue_expire_num = VX800_IGA1_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* VX855 */ + case PCI_DEVICE_ID_VIA_VX875: + /* SR17[7:0] */ + fifo_max_depth = VX855_IGA1_FIFO_MAX_DEPTH; + + /* SR16[7], SR16[5:0] */ + fifo_threshold = VX855_IGA1_FIFO_THRESHOLD; + + /* SR18[7], SR18[5:0] */ + fifo_high_threshold = VX855_IGA1_FIFO_HIGH_THRESHOLD; + + /* SR22[4:0] */ + display_queue_expire_num = VX855_IGA1_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* VX900 */ + case PCI_DEVICE_ID_VIA_VX900_VGA: + /* SR17[7:0] */ + fifo_max_depth = VX900_IGA1_FIFO_MAX_DEPTH; + + /* SR16[7], SR16[5:0] */ + fifo_threshold = VX900_IGA1_FIFO_THRESHOLD; + + /* SR18[7], SR18[5:0] */ + fifo_high_threshold = VX900_IGA1_FIFO_HIGH_THRESHOLD; + + /* SR22[4:0] */ + display_queue_expire_num = VX900_IGA1_DISPLAY_QUEUE_EXPIRE_NUM; + break; + default: + ret = -EINVAL; + break; + } + + if (ret) { + goto exit; + } + + if ((pdev->device == PCI_DEVICE_ID_VIA_CLE266) || + (pdev->device == PCI_DEVICE_ID_VIA_KM400) || + (pdev->device == PCI_DEVICE_ID_VIA_K8M800) || + (pdev->device == PCI_DEVICE_ID_VIA_PM800) || + (pdev->device == PCI_DEVICE_ID_VIA_CN700) || + (pdev->device == PCI_DEVICE_ID_VIA_VT3157)) { + /* Force PREQ to be always higher than TREQ. */ + svga_wseq_mask(VGABASE, 0x18, BIT(6), BIT(6)); + } else { + svga_wseq_mask(VGABASE, 0x18, 0x00, BIT(6)); + } + + if ((pdev->device == PCI_DEVICE_ID_VIA_CLE266) || + (pdev->device == PCI_DEVICE_ID_VIA_KM400)) { + if (enable_extended_display_fifo) { + reg_value = VIA_READ(0x0298); + VIA_WRITE(0x0298, reg_value | 0x20000000); + + /* Turn on IGA1 extended display FIFO. */ + reg_value = VIA_READ(0x0230); + VIA_WRITE(0x0230, reg_value | 0x00200000); + + reg_value = VIA_READ(0x0298); + VIA_WRITE(0x0298, reg_value & (~0x20000000)); + } else { + reg_value = VIA_READ(0x0298); + VIA_WRITE(0x0298, reg_value | 0x20000000); + + /* Turn off IGA1 extended display FIFO. */ + reg_value = VIA_READ(0x0230); + VIA_WRITE(0x0230, reg_value & (~0x00200000)); + + reg_value = VIA_READ(0x0298); + VIA_WRITE(0x0298, reg_value & (~0x20000000)); + + } + } + + /* Set IGA1 Display FIFO Depth Select */ + reg_value = IGA1_FIFO_DEPTH_SELECT_FORMULA(fifo_max_depth); + load_value_to_registers(VGABASE, &iga->fifo_depth, reg_value); + + /* Set Display FIFO Threshold Select */ + reg_value = fifo_threshold / 4; + load_value_to_registers(VGABASE, &iga->threshold, reg_value); + + /* Set FIFO High Threshold Select */ + reg_value = fifo_high_threshold / 4; + load_value_to_registers(VGABASE, &iga->high_threshold, reg_value); + + /* Set Display Queue Expire Num */ + reg_value = display_queue_expire_num / 4; + load_value_to_registers(VGABASE, &iga->display_queue, reg_value); + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static int via_iga2_display_fifo_regs(struct drm_device *dev, + struct via_drm_priv *dev_priv, + struct via_crtc *iga, + struct drm_display_mode *mode, + struct drm_framebuffer *fb) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + u32 reg_value; + unsigned int fifo_max_depth = 0; + unsigned int fifo_threshold = 0; + unsigned int fifo_high_threshold = 0; + unsigned int display_queue_expire_num = 0; + bool enable_extended_display_fifo = false; + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_CLE266: + if (dev_priv->revision == CLE266_REVISION_AX) { + if (((dev_priv->vram_type <= VIA_MEM_DDR_200) && + (fb->format->depth > 16) && + (mode->vdisplay > 768)) || + ((dev_priv->vram_type <= VIA_MEM_DDR_266) && + (fb->format->depth > 16) && + (mode->hdisplay > 1280))) { + /* CR68[7:4] */ + fifo_max_depth = 88; + + /* CR68[3:0] */ + fifo_threshold = 44; + + enable_extended_display_fifo = true; + } else { + /* CR68[7:4] */ + fifo_max_depth = 56; + + /* CR68[3:0] */ + fifo_threshold = 28; + + enable_extended_display_fifo = false; + } + /* dev_priv->revision == CLE266_REVISION_CX */ + } else { + if (mode->hdisplay >= 1024) { + /* CR68[7:4] */ + fifo_max_depth = 88; + + /* CR68[3:0] */ + fifo_threshold = 44; + + enable_extended_display_fifo = false; + } else { + /* CR68[7:4] */ + fifo_max_depth = 56; + + /* CR68[3:0] */ + fifo_threshold = 28; + + enable_extended_display_fifo = false; + } + } + + break; + case PCI_DEVICE_ID_VIA_KM400: + if (mode->hdisplay >= 1600) { + /* CR68[7:4] */ + fifo_max_depth = 120; + + /* CR68[3:0] */ + fifo_threshold = 44; + + enable_extended_display_fifo = true; + } else if (((mode->hdisplay > 1024) && + (fb->format->depth == 24) && + (dev_priv->vram_type <= VIA_MEM_DDR_333)) || + ((mode->hdisplay == 1024) && + (fb->format->depth == 24) && + (dev_priv->vram_type <= VIA_MEM_DDR_200))) { + /* CR68[7:4] */ + fifo_max_depth = 104; + + /* CR68[3:0] */ + fifo_threshold = 28; + + enable_extended_display_fifo = true; + } else if (((mode->hdisplay > 1280) && + (fb->format->depth == 16) && + (dev_priv->vram_type <= VIA_MEM_DDR_333)) || + ((mode->hdisplay == 1280) && + (fb->format->depth == 16) && + (dev_priv->vram_type <= VIA_MEM_DDR_200))) { + /* CR68[7:4] */ + fifo_max_depth = 88; + + /* CR68[3:0] */ + fifo_threshold = 44; + + enable_extended_display_fifo = true; + } else { + /* CR68[7:4] */ + fifo_max_depth = 56; + + /* CR68[3:0] */ + fifo_threshold = 28; + + enable_extended_display_fifo = false; + } + + break; + case PCI_DEVICE_ID_VIA_K8M800: + /* CR95[7], CR94[7], CR68[7:4] */ + fifo_max_depth = 376; + + /* CR95[6:4], CR68[3:0] */ + fifo_threshold = 328; + + /* CR95[2:0], CR92[3:0] */ + fifo_high_threshold = 296; + + if ((fb->format->depth == 24) && + (mode->hdisplay >= 1400)) { + /* CR94[6:0] */ + display_queue_expire_num = 64; + } else { + /* CR94[6:0] */ + display_queue_expire_num = 128; + } + + break; + case PCI_DEVICE_ID_VIA_PM800: + /* CR95[7], CR94[7], CR68[7:4] */ + fifo_max_depth = 96; + + /* CR95[6:4], CR68[3:0] */ + fifo_threshold = 64; + + /* CR95[2:0], CR92[3:0] */ + fifo_high_threshold = 32; + + if ((fb->format->depth == 24) && + (mode->hdisplay >= 1400)) { + /* CR94[6:0] */ + display_queue_expire_num = 64; + } else { + /* CR94[6:0] */ + display_queue_expire_num = 128; + } + + break; + case PCI_DEVICE_ID_VIA_CN700: + /* CR95[7], CR94[7], CR68[7:4] */ + fifo_max_depth = CN700_IGA2_FIFO_MAX_DEPTH; + + /* CR95[6:4], CR68[3:0] */ + fifo_threshold = CN700_IGA2_FIFO_THRESHOLD; + + /* CR95[2:0], CR92[3:0] */ + fifo_high_threshold = CN700_IGA2_FIFO_HIGH_THRESHOLD; + + /* CR94[6:0] */ + display_queue_expire_num = CN700_IGA2_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* CX700 */ + case PCI_DEVICE_ID_VIA_VT3157: + /* CR95[7], CR94[7], CR68[7:4] */ + fifo_max_depth = CX700_IGA2_FIFO_MAX_DEPTH; + + /* CR95[6:4], CR68[3:0] */ + fifo_threshold = CX700_IGA2_FIFO_THRESHOLD; + + /* CR95[2:0], CR92[3:0] */ + fifo_high_threshold = CX700_IGA2_FIFO_HIGH_THRESHOLD; + + /* CR94[6:0] */ + display_queue_expire_num = CX700_IGA2_DISPLAY_QUEUE_EXPIRE_NUM; + break; + + /* K8M890 */ + case PCI_DEVICE_ID_VIA_K8M890: + /* CR95[7], CR94[7], CR68[7:4] */ + fifo_max_depth = K8M890_IGA2_FIFO_MAX_DEPTH; + + /* CR95[6:4], CR68[3:0] */ + fifo_threshold = K8M890_IGA2_FIFO_THRESHOLD; + + /* CR95[2:0], CR92[3:0] */ + fifo_high_threshold = K8M890_IGA2_FIFO_HIGH_THRESHOLD; + + /* CR94[6:0] */ + display_queue_expire_num = K8M890_IGA2_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* P4M890 */ + case PCI_DEVICE_ID_VIA_VT3343: + /* CR95[7], CR94[7], CR68[7:4] */ + fifo_max_depth = P4M890_IGA2_FIFO_MAX_DEPTH; + + /* CR95[6:4], CR68[3:0] */ + fifo_threshold = P4M890_IGA2_FIFO_THRESHOLD; + + /* CR95[2:0], CR92[3:0] */ + fifo_high_threshold = P4M890_IGA2_FIFO_HIGH_THRESHOLD; + + /* CR94[6:0] */ + display_queue_expire_num = P4M890_IGA2_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* P4M900 */ + case PCI_DEVICE_ID_VIA_P4M900: + /* CR95[7], CR94[7], CR68[7:4] */ + fifo_max_depth = P4M900_IGA2_FIFO_MAX_DEPTH; + + /* CR95[7], CR94[7], CR68[7:4] */ + fifo_threshold = P4M900_IGA2_FIFO_THRESHOLD; + + /* CR95[2:0], CR92[3:0] */ + fifo_high_threshold = P4M900_IGA2_FIFO_HIGH_THRESHOLD; + + /* CR94[6:0] */ + display_queue_expire_num = P4M900_IGA2_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* VX800 */ + case PCI_DEVICE_ID_VIA_VT1122: + /* CR95[7], CR94[7], CR68[7:4] */ + fifo_max_depth = VX800_IGA2_FIFO_MAX_DEPTH; + + /* CR95[6:4], CR68[3:0] */ + fifo_threshold = VX800_IGA2_FIFO_THRESHOLD; + + /* CR95[2:0], CR92[3:0] */ + fifo_high_threshold = VX800_IGA2_FIFO_HIGH_THRESHOLD; + + /* CR94[6:0] */ + display_queue_expire_num = VX800_IGA2_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* VX855 */ + case PCI_DEVICE_ID_VIA_VX875: + /* CR95[7], CR94[7], CR68[7:4] */ + fifo_max_depth = VX855_IGA2_FIFO_MAX_DEPTH; + + /* CR95[6:4], CR68[3:0] */ + fifo_threshold = VX855_IGA2_FIFO_THRESHOLD; + + /* CR95[2:0], CR92[3:0] */ + fifo_high_threshold = VX855_IGA2_FIFO_HIGH_THRESHOLD; + + /* CR94[6:0] */ + display_queue_expire_num = VX855_IGA2_DISPLAY_QUEUE_EXPIRE_NUM; + break; + /* VX900 */ + case PCI_DEVICE_ID_VIA_VX900_VGA: + /* CR95[7], CR94[7], CR68[7:4] */ + fifo_max_depth = VX900_IGA2_FIFO_MAX_DEPTH; + + /* CR95[6:4], CR68[3:0] */ + fifo_threshold = VX900_IGA2_FIFO_THRESHOLD; + + /* CR95[2:0], CR92[3:0] */ + fifo_high_threshold = VX900_IGA2_FIFO_HIGH_THRESHOLD; + + /* CR94[6:0] */ + display_queue_expire_num = VX900_IGA2_DISPLAY_QUEUE_EXPIRE_NUM; + break; + default: + ret = -EINVAL; + break; + } + + if (ret) { + goto exit; + } + + if ((pdev->device == PCI_DEVICE_ID_VIA_CLE266) || + (pdev->device == PCI_DEVICE_ID_VIA_KM400)) { + if (enable_extended_display_fifo) { + /* Enable IGA2 extended display FIFO. */ + svga_wcrt_mask(VGABASE, 0x6a, BIT(5), BIT(5)); + } else { + /* Disable IGA2 extended display FIFO. */ + svga_wcrt_mask(VGABASE, 0x6a, 0x00, BIT(5)); + } + } + + if ((pdev->device == PCI_DEVICE_ID_VIA_CLE266) || + (pdev->device == PCI_DEVICE_ID_VIA_KM400)) { + /* Set IGA2 Display FIFO Depth Select */ + reg_value = IGA2_FIFO_DEPTH_SELECT_FORMULA(fifo_max_depth); + load_value_to_registers(VGABASE, &iga->fifo_depth, reg_value); + + /* Set Display FIFO Threshold Select */ + reg_value = fifo_threshold / 4; + load_value_to_registers(VGABASE, &iga->threshold, reg_value); + } else { + /* Set IGA2 Display FIFO Depth Select */ + reg_value = IGA2_FIFO_DEPTH_SELECT_FORMULA(fifo_max_depth); + load_value_to_registers(VGABASE, &iga->fifo_depth, reg_value); + + /* Set Display FIFO Threshold Select */ + reg_value = fifo_threshold / 4; + load_value_to_registers(VGABASE, &iga->threshold, reg_value); + + /* Set FIFO High Threshold Select */ + reg_value = fifo_high_threshold / 4; + load_value_to_registers(VGABASE, &iga->high_threshold, reg_value); + + /* Set Display Queue Expire Num */ + reg_value = display_queue_expire_num / 4; + load_value_to_registers(VGABASE, &iga->display_queue, reg_value); + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +/* Load CRTC Pixel Timing registers */ +void via_load_crtc_pixel_timing(struct drm_crtc *crtc, + struct drm_display_mode *mode) +{ + struct drm_device *dev = crtc->dev; + struct via_crtc *iga = container_of(crtc, struct via_crtc, base); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + u32 reg_value = 0; + + reg_value = IGA1_PIXELTIMING_HOR_TOTAL_FORMULA(mode->crtc_htotal); + load_value_to_registers(VGABASE, &iga->pixel_timings.htotal, + reg_value); + + reg_value = IGA1_PIXELTIMING_HOR_ADDR_FORMULA(mode->crtc_hdisplay) << 16; + load_value_to_registers(VGABASE, &iga->pixel_timings.hdisplay, + reg_value); + + reg_value = IGA1_PIXELTIMING_HOR_BLANK_START_FORMULA( + mode->crtc_hblank_start); + load_value_to_registers(VGABASE, &iga->pixel_timings.hblank_start, + reg_value); + + reg_value = IGA1_PIXELTIMING_HOR_BLANK_END_FORMULA(mode->crtc_hblank_end) << 16; + load_value_to_registers(VGABASE, &iga->pixel_timings.hblank_end, reg_value); + + reg_value = IGA1_PIXELTIMING_HOR_SYNC_START_FORMULA(mode->crtc_hsync_start); + load_value_to_registers(VGABASE, &iga->pixel_timings.hsync_start, + reg_value); + + reg_value = IGA1_PIXELTIMING_HOR_SYNC_END_FORMULA(mode->crtc_hsync_end) << 16; + load_value_to_registers(VGABASE, &iga->pixel_timings.hsync_end, reg_value); + + reg_value = IGA1_PIXELTIMING_VER_TOTAL_FORMULA(mode->crtc_vtotal); + load_value_to_registers(VGABASE, &iga->pixel_timings.vtotal, reg_value); + + reg_value = IGA1_PIXELTIMING_VER_ADDR_FORMULA(mode->crtc_vdisplay) << 16; + load_value_to_registers(VGABASE, &iga->pixel_timings.vdisplay, reg_value); + + reg_value = IGA1_PIXELTIMING_VER_BLANK_START_FORMULA( + mode->crtc_vblank_start); + load_value_to_registers(VGABASE, &iga->pixel_timings.vblank_start, reg_value); + + reg_value = IGA1_PIXELTIMING_VER_BLANK_END_FORMULA(mode->crtc_vblank_end) << 16; + load_value_to_registers(VGABASE, &iga->pixel_timings.vblank_end, reg_value); + + reg_value = IGA1_PIXELTIMING_VER_SYNC_START_FORMULA(mode->crtc_vsync_start); + load_value_to_registers(VGABASE, &iga->pixel_timings.vsync_start, reg_value); + + reg_value = IGA1_PIXELTIMING_VER_SYNC_END_FORMULA(mode->crtc_vsync_end) << 12; + load_value_to_registers(VGABASE, &iga->pixel_timings.vsync_end, reg_value); + + if (mode->flags & DRM_MODE_FLAG_INTERLACE) { + reg_value = IGA1_PIXELTIMING_HVSYNC_OFFSET_END_FORMULA( + mode->crtc_htotal, mode->crtc_hsync_start); + VIA_WRITE_MASK(IGA1_PIX_HALF_LINE_REG, reg_value, + IGA1_PIX_HALF_LINE_MASK); + + svga_wcrt_mask(VGABASE, 0x32, BIT(2), BIT(2)); + /** + * According to information from HW team, + * we need to set 0xC280[1] = 1 (HDMI function enable) + * or 0xC640[0] = 1 (DP1 enable) + * to let the half line function work. + * Otherwise, the clock for interlace mode + * will not correct. + * This is a special setting for 410. + */ + VIA_WRITE_MASK(0xC280, BIT(1), BIT(1)); + } else { + VIA_WRITE_MASK(IGA1_PIX_HALF_LINE_REG, 0x0, IGA1_PIX_HALF_LINE_MASK); + svga_wcrt_mask(VGABASE, 0x32, 0x00, BIT(2)); + + } + svga_wcrt_mask(VGABASE, 0xFD, BIT(5), BIT(5)); +} + +/* Load CRTC timing registers */ +void via_load_crtc_timing(struct via_crtc *iga, struct drm_display_mode *mode) +{ + struct drm_device *dev = iga->base.dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + u32 reg_value = 0; + + if (!iga->index) { + if (pdev->device == PCI_DEVICE_ID_VIA_VX900_VGA) { + /* Disable IGA1 shadow timing */ + svga_wcrt_mask(VGABASE, 0x45, 0x00, BIT(0)); + + /* Disable IGA1 pixel timing */ + svga_wcrt_mask(VGABASE, 0xFD, 0x00, BIT(5)); + } + + reg_value = IGA1_HOR_TOTAL_FORMULA(mode->crtc_htotal); + load_value_to_registers(VGABASE, &iga->timings.htotal, reg_value); + + reg_value = IGA1_HOR_ADDR_FORMULA(mode->crtc_hdisplay); + load_value_to_registers(VGABASE, &iga->timings.hdisplay, reg_value); + + reg_value = IGA1_HOR_BLANK_START_FORMULA(mode->crtc_hblank_start); + load_value_to_registers(VGABASE, &iga->timings.hblank_start, reg_value); + + reg_value = IGA1_HOR_BLANK_END_FORMULA(mode->crtc_hblank_end); + load_value_to_registers(VGABASE, &iga->timings.hblank_end, reg_value); + + reg_value = IGA1_HOR_SYNC_START_FORMULA(mode->crtc_hsync_start); + load_value_to_registers(VGABASE, &iga->timings.hsync_start, reg_value); + + reg_value = IGA1_HOR_SYNC_END_FORMULA(mode->crtc_hsync_end); + load_value_to_registers(VGABASE, &iga->timings.hsync_end, reg_value); + + reg_value = IGA1_VER_TOTAL_FORMULA(mode->crtc_vtotal); + load_value_to_registers(VGABASE, &iga->timings.vtotal, reg_value); + + reg_value = IGA1_VER_ADDR_FORMULA(mode->crtc_vdisplay); + load_value_to_registers(VGABASE, &iga->timings.vdisplay, reg_value); + + reg_value = IGA1_VER_BLANK_START_FORMULA(mode->crtc_vblank_start); + load_value_to_registers(VGABASE, &iga->timings.vblank_start, reg_value); + + reg_value = IGA1_VER_BLANK_END_FORMULA(mode->crtc_vblank_end); + load_value_to_registers(VGABASE, &iga->timings.vblank_end, reg_value); + + reg_value = IGA1_VER_SYNC_START_FORMULA(mode->crtc_vsync_start); + load_value_to_registers(VGABASE, &iga->timings.vsync_start, reg_value); + + reg_value = IGA1_VER_SYNC_END_FORMULA(mode->crtc_vsync_end); + load_value_to_registers(VGABASE, &iga->timings.vsync_end, reg_value); + } else { + reg_value = IGA2_HOR_TOTAL_FORMULA(mode->crtc_htotal); + load_value_to_registers(VGABASE, &iga->timings.htotal, reg_value); + + reg_value = IGA2_HOR_ADDR_FORMULA(mode->crtc_hdisplay); + load_value_to_registers(VGABASE, &iga->timings.hdisplay, reg_value); + + reg_value = IGA2_HOR_BLANK_START_FORMULA(mode->crtc_hblank_start); + load_value_to_registers(VGABASE, &iga->timings.hblank_start, reg_value); + + reg_value = IGA2_HOR_BLANK_END_FORMULA(mode->crtc_hblank_end); + load_value_to_registers(VGABASE, &iga->timings.hblank_end, reg_value); + + reg_value = IGA2_HOR_SYNC_START_FORMULA(mode->crtc_hsync_start); + load_value_to_registers(VGABASE, &iga->timings.hsync_start, reg_value); + + reg_value = IGA2_HOR_SYNC_END_FORMULA(mode->crtc_hsync_end); + load_value_to_registers(VGABASE, &iga->timings.hsync_end, reg_value); + + reg_value = IGA2_VER_TOTAL_FORMULA(mode->crtc_vtotal); + load_value_to_registers(VGABASE, &iga->timings.vtotal, reg_value); + + reg_value = IGA2_VER_ADDR_FORMULA(mode->crtc_vdisplay); + load_value_to_registers(VGABASE, &iga->timings.vdisplay, reg_value); + + reg_value = IGA2_VER_BLANK_START_FORMULA(mode->crtc_vblank_start); + load_value_to_registers(VGABASE, &iga->timings.vblank_start, reg_value); + + reg_value = IGA2_VER_BLANK_END_FORMULA(mode->crtc_vblank_end); + load_value_to_registers(VGABASE, &iga->timings.vblank_end, reg_value); + + reg_value = IGA2_VER_SYNC_START_FORMULA(mode->crtc_vsync_start); + load_value_to_registers(VGABASE, &iga->timings.vsync_start, reg_value); + + reg_value = IGA2_VER_SYNC_END_FORMULA(mode->crtc_vsync_end); + load_value_to_registers(VGABASE, &iga->timings.vsync_end, reg_value); + } +} + +/* + * This function changes the destination of scaling up/down + * and CRTC timing registers + * crtc : which IGA + * scale_type : upscaling(VIA_EXPAND) or downscaling(VIA_SHRINK) + */ +void via_set_scale_path(struct drm_crtc *crtc, u32 scale_type) +{ + struct via_crtc *iga = container_of(crtc, struct via_crtc, base); + struct drm_device *dev = crtc->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + u8 reg_cr_fd = vga_rcrt(VGABASE, 0xFD); + + if (!iga->index) + /* register reuse: select IGA1 path */ + reg_cr_fd |= BIT(7); + else + /* register reuse: select IGA2 path */ + reg_cr_fd &= ~BIT(7); + + /* only IGA1 up scaling need to clear this bit CRFD.5. */ + if (pdev->device == PCI_DEVICE_ID_VIA_VX900_VGA) { + if (!iga->index + && ((VIA_HOR_EXPAND & scale_type) + || (VIA_VER_EXPAND & scale_type))) + reg_cr_fd &= ~BIT(5); + } + + /* CRFD.0 = 0 : common IGA2, = 1 : downscaling IGA */ + switch (scale_type) { + case VIA_NO_SCALING: + case VIA_EXPAND: + case VIA_HOR_EXPAND: + case VIA_VER_EXPAND: + /* register reuse: as common IGA2 */ + reg_cr_fd &= ~BIT(0); + break; + + case VIA_SHRINK: + /* register reuse: as downscaling IGA */ + reg_cr_fd |= BIT(0); + break; + + default: + break; + } + vga_wcrt(VGABASE, 0xFD, reg_cr_fd); +} + +/* disable IGA scaling */ +static void via_disable_iga_scaling(struct drm_crtc *crtc) +{ + struct via_crtc *iga = container_of(crtc, struct via_crtc, base); + struct drm_device *dev = crtc->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + if (iga->index) { + /* IGA2 scalings disable */ + via_set_scale_path(crtc, VIA_SHRINK); + /* disable IGA down scaling and buffer sharing. */ + svga_wcrt_mask(VGABASE, 0x89, 0x00, BIT(7) | BIT(0)); + /* Horizontal and Vertical scaling disable */ + svga_wcrt_mask(VGABASE, 0xA2, 0x00, BIT(7) | BIT(3)); + + /* Disable scale up as well */ + via_set_scale_path(crtc, VIA_EXPAND); + /* disable IGA up scaling */ + svga_wcrt_mask(VGABASE, 0x79, 0, BIT(0)); + /* Horizontal and Vertical scaling disable */ + svga_wcrt_mask(VGABASE, 0xA2, 0x00, BIT(7) | BIT(3)); + } else { + /* IGA1 scalings disable */ + via_set_scale_path(crtc, VIA_SHRINK); + /* disable IGA down scaling and buffer sharing. */ + svga_wcrt_mask(VGABASE, 0x89, 0x00, BIT(7) | BIT(0)); + /* Horizontal and Vertical scaling disable */ + svga_wcrt_mask(VGABASE, 0xA2, 0x00, BIT(7) | BIT(3)); + + /* Disable scale up as well */ + via_set_scale_path(crtc, VIA_EXPAND); + /* disable IGA up scaling */ + svga_wcrt_mask(VGABASE, 0x79, 0, BIT(0)); + /* Horizontal and Vertical scaling disable */ + svga_wcrt_mask(VGABASE, 0xA2, 0x00, BIT(7) | BIT(3)); + } +} + +/* + * Enable IGA scale functions. + * + * input : iga_path = IGA1 or IGA2 or + * IGA1+IGA2 + * + * scale_type = VIA_HOR_EXPAND or VIA_VER_EXPAND or VIA_EXPAND or + * VIA_SHRINK or VIA_SHRINK + VIA_EXPAND + */ +bool via_set_iga_scale_function(struct drm_crtc *crtc, u32 scale_type) +{ + struct via_crtc *iga = container_of(crtc, struct via_crtc, base); + struct drm_device *dev = crtc->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + if (!(scale_type & (VIA_SHRINK + VIA_EXPAND))) + return false; + + if (iga->index) { + /* IGA2 scalings enable */ + if (VIA_SHRINK & scale_type) { + via_set_scale_path(crtc, VIA_SHRINK); + /* Horizontal and Vertical scaling enable */ + svga_wcrt_mask(VGABASE, 0xA2, BIT(7) | BIT(3), BIT(7) | BIT(3)); + /* enable IGA down scaling */ + svga_wcrt_mask(VGABASE, 0x89, BIT(0), BIT(0)); + /* hor and ver scaling : Interpolation */ + svga_wcrt_mask(VGABASE, 0x79, BIT(2) | BIT(1), BIT(2) | BIT(1)); + } + + if (VIA_EXPAND & scale_type) { + via_set_scale_path(crtc, VIA_EXPAND); + /* enable IGA up scaling */ + svga_wcrt_mask(VGABASE, 0x79, BIT(0), BIT(0)); + } + + if ((VIA_EXPAND & scale_type) == VIA_EXPAND) { + /* Horizontal and Vertical scaling enable */ + svga_wcrt_mask(VGABASE, 0xA2, BIT(7) | BIT(3), BIT(7) | BIT(3)); + /* hor and ver scaling : Interpolation */ + svga_wcrt_mask(VGABASE, 0x79, BIT(2) | BIT(1), BIT(2) | BIT(1)); + } else if (VIA_HOR_EXPAND & scale_type) { + /* Horizontal scaling disable */ + svga_wcrt_mask(VGABASE, 0xA2, BIT(7), BIT(7)); + /* hor scaling : Interpolation */ + svga_wcrt_mask(VGABASE, 0x79, BIT(1), BIT(1)); + } else if (VIA_VER_EXPAND & scale_type) { + /* Vertical scaling disable */ + svga_wcrt_mask(VGABASE, 0xA2, BIT(3), BIT(3)); + /* ver scaling : Interpolation */ + svga_wcrt_mask(VGABASE, 0x79, BIT(2), BIT(2)); + } + } else { + /* IGA1 scalings enable */ + if (VIA_SHRINK & scale_type) { + via_set_scale_path(crtc, VIA_SHRINK); + + /* Horizontal and Vertical scaling enable */ + svga_wcrt_mask(VGABASE, 0xA2, BIT(7) | BIT(3), BIT(7) | BIT(3)); + /* enable IGA down scaling */ + svga_wcrt_mask(VGABASE, 0x89, BIT(0), BIT(0)); + /* hor and ver scaling : Interpolation */ + svga_wcrt_mask(VGABASE, 0x79, BIT(2) | BIT(1), BIT(2) | BIT(1)); + } + + if (VIA_EXPAND & scale_type) { + via_set_scale_path(crtc, VIA_EXPAND); + /* enable IGA up scaling */ + svga_wcrt_mask(VGABASE, 0x79, BIT(0), BIT(0)); + } + + if ((VIA_EXPAND & scale_type) == VIA_EXPAND) { + /* Horizontal and Vertical scaling enable */ + svga_wcrt_mask(VGABASE, 0xA2, BIT(7) | BIT(3), BIT(7) | BIT(3)); + /* hor and ver scaling : Interpolation */ + svga_wcrt_mask(VGABASE, 0x79, BIT(2) | BIT(1), BIT(2) | BIT(1)); + } else if (VIA_HOR_EXPAND & scale_type) { + /* Horizontal scaling disable */ + svga_wcrt_mask(VGABASE, 0xA2, BIT(7), BIT(7)); + /* hor scaling : Interpolation */ + svga_wcrt_mask(VGABASE, 0x79, BIT(1), BIT(1)); + } else if (VIA_VER_EXPAND & scale_type) { + /* Vertical scaling disable */ + svga_wcrt_mask(VGABASE, 0xA2, BIT(3), BIT(3)); + /* ver scaling : Interpolation */ + svga_wcrt_mask(VGABASE, 0x79, BIT(2), BIT(2)); + } + } + return true; +} + +/* + * 1. get scale factors from source and dest H & V size + * 2. load scale factors into registers + * 3. enable H or V scale ( set CRA2 bit7 or bit3 ) + */ +bool via_load_iga_scale_factor_regs(struct via_drm_priv *dev_priv, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + u32 scale_type, u32 is_hor_or_ver) +{ + u32 dst_hor_regs = adjusted_mode->crtc_hdisplay; + u32 dst_ver_regs = adjusted_mode->crtc_vdisplay; + u32 src_hor_regs = mode->crtc_hdisplay; + u32 src_ver_regs = mode->crtc_vdisplay; + u32 hor_factor = 0, ver_factor = 0; + struct vga_registers reg; + + if ((0 == src_hor_regs) || (0 == src_ver_regs) || (0 == dst_hor_regs) + || (0 == dst_ver_regs)) + return false; + + if (VIA_EXPAND == scale_type) { + if (HOR_SCALE & is_hor_or_ver) { + hor_factor = ((src_hor_regs - 1) * 4096) / (dst_hor_regs - 1); + reg.count = ARRAY_SIZE(lcd_hor_scaling); + reg.regs = lcd_hor_scaling; + load_value_to_registers(VGABASE, ®, hor_factor); + /* Horizontal scaling enable */ + svga_wcrt_mask(VGABASE, 0xA2, BIT(7), BIT(7)); + } + + if (VER_SCALE & is_hor_or_ver) { + ver_factor = ((src_ver_regs - 1) * 2048) / (dst_ver_regs - 1); + reg.count = ARRAY_SIZE(lcd_ver_scaling); + reg.regs = lcd_ver_scaling; + load_value_to_registers(VGABASE, ®, ver_factor); + /* Vertical scaling enable */ + svga_wcrt_mask(VGABASE, 0xA2, BIT(3), BIT(3)); + } + + } else if (VIA_SHRINK == scale_type) { + + if (src_hor_regs > dst_hor_regs) + hor_factor = ((src_hor_regs - dst_hor_regs) * 4096) / dst_hor_regs; + + if (src_ver_regs > dst_ver_regs) + ver_factor = ((src_ver_regs - dst_ver_regs) * 2048) / dst_ver_regs; + + reg.count = ARRAY_SIZE(lcd_hor_scaling); + reg.regs = lcd_hor_scaling; + load_value_to_registers(VGABASE, ®, hor_factor); + + reg.count = ARRAY_SIZE(lcd_ver_scaling); + reg.regs = lcd_ver_scaling; + load_value_to_registers(VGABASE, ®, ver_factor); + + /* set buffer sharing enable bit . */ + if (hor_factor || ver_factor) { + if (dst_hor_regs > 1024) + svga_wcrt_mask(VGABASE, 0x89, BIT(7), BIT(7)); + else + svga_wcrt_mask(VGABASE, 0x89, 0x00, BIT(7)); + } + + if (hor_factor) + /* CRA2[7]:1 Enable Hor scaling + CRA2[6]:1 Linear Mode */ + svga_wcrt_mask(VGABASE, 0xA2, BIT(7) | BIT(6), BIT(7) | BIT(6)); + else + svga_wcrt_mask(VGABASE, 0xA2, 0, BIT(7)); + + if (ver_factor) + svga_wcrt_mask(VGABASE, 0xA2, BIT(3), BIT(3)); + else + svga_wcrt_mask(VGABASE, 0xA2, 0, BIT(3)); + } + return true; +} + +void via_set_iga2_downscale_source_timing(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + unsigned int viewx = adjusted_mode->hdisplay, + viewy = adjusted_mode->vdisplay; + unsigned int srcx = mode->crtc_hdisplay, srcy = mode->crtc_vdisplay; + struct via_crtc *iga = container_of(crtc, struct via_crtc, base); + struct drm_display_mode *src_timing; + + src_timing = drm_mode_duplicate(crtc->dev, adjusted_mode); + /* derived source timing */ + if (srcx <= viewx) { + src_timing->crtc_htotal = adjusted_mode->crtc_htotal; + src_timing->crtc_hdisplay = adjusted_mode->crtc_hdisplay; + } else { + unsigned int htotal = adjusted_mode->crtc_htotal - + adjusted_mode->crtc_hdisplay; + + src_timing->crtc_htotal = htotal + srcx; + src_timing->crtc_hdisplay = srcx; + } + src_timing->crtc_hblank_start = src_timing->crtc_hdisplay; + src_timing->crtc_hblank_end = src_timing->crtc_htotal; + src_timing->crtc_hsync_start = src_timing->crtc_hdisplay + 2; + src_timing->crtc_hsync_end = src_timing->crtc_hsync_start + 1; + + if (srcy <= viewy) { + src_timing->crtc_vtotal = adjusted_mode->crtc_vtotal; + src_timing->crtc_vdisplay = adjusted_mode->crtc_vdisplay; + } else { + unsigned int vtotal = adjusted_mode->crtc_vtotal - + adjusted_mode->crtc_vdisplay; + + src_timing->crtc_vtotal = vtotal + srcy; + src_timing->crtc_vdisplay = srcy; + } + src_timing->crtc_vblank_start = src_timing->crtc_vdisplay; + src_timing->crtc_vblank_end = src_timing->crtc_vtotal; + src_timing->crtc_vsync_start = src_timing->crtc_vdisplay + 2; + src_timing->crtc_vsync_end = src_timing->crtc_vsync_start + 1; + + via_set_scale_path(crtc, VIA_NO_SCALING); + /* load src timing */ + via_load_crtc_timing(iga, src_timing); + + /* Cleanup up source timings */ + drm_mode_destroy(crtc->dev, src_timing); +} + +void via_mode_set_nofb(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct drm_display_mode *mode = &crtc->state->mode; + struct drm_display_mode *adjusted_mode = + &crtc->state->adjusted_mode; + struct via_crtc *iga = container_of(crtc, + struct via_crtc, base); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + u8 reg_value = 0; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (!iga->index) { + /* Load standard registers */ + via_load_vpit_regs(dev_priv); + + /* Unlock */ + via_unlock_crtc(VGABASE, pdev->device); + + /* IGA1 reset */ + vga_wcrt(VGABASE, 0x09, 0x00); /* initial CR09=0 */ + svga_wcrt_mask(VGABASE, 0x11, 0x00, BIT(6)); + + /* disable IGA scales first */ + via_disable_iga_scaling(crtc); + + /* + * when not down scaling, we only need load one + * timing. + */ + via_load_crtc_timing(iga, adjusted_mode); + + switch (adjusted_mode->crtc_htotal % 8) { + case 0: + default: + break; + case 2: + reg_value = BIT(7); + break; + case 4: + reg_value = BIT(6); + break; + case 6: + reg_value = BIT(3); + break; + } + + svga_wcrt_mask(VGABASE, 0x47, + reg_value, BIT(7) | BIT(6) | BIT(3)); + + /* Relock */ + via_lock_crtc(VGABASE); + + /* Set non-interlace / interlace mode. */ + via_iga1_set_interlace_mode(VGABASE, + adjusted_mode->flags & + DRM_MODE_FLAG_INTERLACE); + + /* No HSYNC shift. */ + via_iga1_set_hsync_shift(VGABASE, 0x05); + + /* Load display FIFO. */ + ret = via_iga1_display_fifo_regs(dev, dev_priv, + iga, adjusted_mode, + crtc->primary->fb); + if (ret) { + goto exit; + } + + /* Set PLL */ + if (adjusted_mode->clock) { + u32 clock = adjusted_mode->clock * 1000; + u32 pll_regs; + + if (iga->scaling_mode & VIA_SHRINK) + clock *= 2; + pll_regs = via_get_clk_value(crtc->dev, clock); + via_set_vclock(crtc, pll_regs); + } + + via_iga_common_init(VGABASE); + + /* Set palette LUT to 8-bit mode. */ + via_iga1_set_palette_lut_resolution(VGABASE, true); + } else { + /* Load standard registers */ + via_load_vpit_regs(dev_priv); + + /* Unlock */ + via_unlock_crtc(VGABASE, pdev->device); + + /* disable IGA scales first */ + via_disable_iga_scaling(crtc); + + /* Load crtc timing and IGA scaling */ + if (iga->scaling_mode & VIA_SHRINK) { + /* + * enable IGA2 down scaling and set + * Interpolation + */ + via_set_iga_scale_function(crtc, VIA_SHRINK); + + /* load hor and ver downscaling factor */ + /* + * interlace modes scaling support(example + * 1080I): we should use mode->crtc_vdisplay + * here, because crtc_vdisplay=540, + * vdisplay=1080, we need 540 here, not 1080. + */ + via_load_iga_scale_factor_regs(dev_priv, + mode, + adjusted_mode, + VIA_SHRINK, + HOR_VER_SCALE); + /* load src timing to timing registers */ + /* + * interlace modes scaling support(example + * 1080I): we should use mode->crtc_vdisplay + * here, because crtc_vdisplay=540, + * vdisplay=1080, we need 540 here, not 1080. + */ + via_set_iga2_downscale_source_timing(crtc, + mode, + adjusted_mode); + + /* Download dst timing */ + via_set_scale_path(crtc, VIA_SHRINK); + via_load_crtc_timing(iga, adjusted_mode); + /* + * very necessary to set IGA to none scaling + * status need to fix why so need. + */ + via_set_scale_path(crtc, VIA_NO_SCALING); + } else { + /* + * when not down scaling, we only need load + * one timing. + */ + via_load_crtc_timing(iga, adjusted_mode); + + /* II. up scaling */ + if (iga->scaling_mode & VIA_EXPAND) { + /* Horizontal scaling */ + if (iga->scaling_mode & + VIA_HOR_EXPAND) { + via_set_iga_scale_function( + crtc, + VIA_HOR_EXPAND); + via_load_iga_scale_factor_regs( + dev_priv, + mode, + adjusted_mode, + VIA_EXPAND, + HOR_SCALE); + } + + /* Vertical scaling */ + if (iga->scaling_mode & + VIA_VER_EXPAND) { + via_set_iga_scale_function( + crtc, + VIA_VER_EXPAND); + via_load_iga_scale_factor_regs( + dev_priv, + mode, + adjusted_mode, + VIA_EXPAND, + VER_SCALE); + } + } + } + + /* Relock */ + via_lock_crtc(VGABASE); + + /* Set non-interlace / interlace mode. */ + via_iga2_set_interlace_mode(VGABASE, + adjusted_mode->flags & + DRM_MODE_FLAG_INTERLACE); + + /* Load display FIFO. */ + ret = via_iga2_display_fifo_regs(dev, dev_priv, + iga, adjusted_mode, + crtc->primary->fb); + if (ret) { + goto exit; + } + + /* Set PLL */ + if (adjusted_mode->clock) { + u32 clock = adjusted_mode->clock * 1000; + u32 pll_regs; + + if (iga->scaling_mode & VIA_SHRINK) + clock *= 2; + pll_regs = via_get_clk_value(crtc->dev, clock); + via_set_vclock(crtc, pll_regs); + } + + via_iga_common_init(VGABASE); + + /* Set palette LUT to 8-bit mode. */ + via_iga2_set_palette_lut_resolution(VGABASE, true); + + svga_wcrt_mask(VGABASE, 0x6A, BIT(7), BIT(7)); + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_crtc_helper_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + struct drm_device *dev = crtc->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct via_crtc *iga = container_of(crtc, + struct via_crtc, base); + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (!iga->index) { + svga_wseq_mask(VGABASE, 0x01, 0x00, BIT(5)); + } else { + svga_wcrt_mask(VGABASE, 0x6B, 0x00, BIT(2)); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_crtc_helper_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + struct drm_device *dev = crtc->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct via_crtc *iga = container_of(crtc, + struct via_crtc, base); + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (!iga->index) { + svga_wseq_mask(VGABASE, 0x01, BIT(5), BIT(5)); + } else { + svga_wcrt_mask(VGABASE, 0x6B, BIT(2), BIT(2)); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static const struct drm_crtc_helper_funcs via_drm_crtc_helper_funcs = { + .mode_set_nofb = via_mode_set_nofb, + .atomic_enable = via_crtc_helper_atomic_enable, + .atomic_disable = via_crtc_helper_atomic_disable, +}; + +static int via_primary_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_plane_state = + drm_atomic_get_new_plane_state(state, plane); + struct drm_crtc_state *new_crtc_state; + struct drm_device *dev = plane->dev; + struct drm_framebuffer *fb = new_plane_state->fb; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + uint32_t frame_buffer_size; + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if ((!new_plane_state->crtc) || (!new_plane_state->visible)) { + goto exit; + } + + frame_buffer_size = (fb->width * fb->format->cpp[0]) * + fb->height; + if (frame_buffer_size > dev_priv->vram_size) { + ret = -ENOMEM; + goto exit; + } + + if ((fb->width > dev->mode_config.max_width) || + (fb->width < dev->mode_config.min_width)) { + ret = -EINVAL; + goto exit; + } + + new_crtc_state = drm_atomic_get_new_crtc_state(state, + new_plane_state->crtc); + ret = drm_atomic_helper_check_plane_state( + new_plane_state, + new_crtc_state, + DRM_PLANE_HELPER_NO_SCALING, + DRM_PLANE_HELPER_NO_SCALING, + false, true); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static void via_primary_atomic_disable(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return; +} + +void via_primary_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_state = + drm_atomic_get_new_plane_state(state, plane); + struct drm_crtc *crtc = new_state->crtc; + struct drm_framebuffer *fb = new_state->fb; + uint32_t pitch = (new_state->crtc_y * fb->pitches[0]) + + (new_state->crtc_x * fb->format->cpp[0]); + uint32_t addr; + struct via_crtc *iga = container_of(crtc, struct via_crtc, base); + struct drm_device *dev = crtc->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct drm_gem_object *gem; + struct ttm_buffer_object *ttm_bo; + struct via_bo *bo; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + gem = fb->obj[0]; + ttm_bo = container_of(gem, struct ttm_buffer_object, base); + bo = to_ttm_bo(ttm_bo); + + if (!iga->index) { + via_iga1_set_color_depth(dev_priv, fb->format->depth); + + /* Set the framebuffer offset */ + addr = round_up((ttm_bo->resource->start << PAGE_SHIFT) + + pitch, 16) >> 1; + + vga_wcrt(VGABASE, 0x0D, addr & 0xFF); + vga_wcrt(VGABASE, 0x0C, (addr >> 8) & 0xFF); + /* Yes order of setting these registers matters on some hardware */ + svga_wcrt_mask(VGABASE, 0x48, ((addr >> 24) & 0x1F), 0x1F); + vga_wcrt(VGABASE, 0x34, (addr >> 16) & 0xFF); + + /* Load fetch count registers */ + pitch = ALIGN(crtc->mode.hdisplay * fb->format->cpp[0], + 16); + load_value_to_registers(VGABASE, &iga->fetch, pitch >> 4); + + /* Set the primary pitch */ + pitch = ALIGN(fb->pitches[0], 16); + /* Spec does not say that first adapter skips 3 bits but old + * code did it and seems to be reasonable in analogy to + * second adapter */ + load_value_to_registers(VGABASE, &iga->offset, pitch >> 3); + } else { + via_iga2_set_color_depth(dev_priv, fb->format->depth); + + /* Set the framebuffer offset */ + addr = round_up((ttm_bo->resource->start << PAGE_SHIFT) + + pitch, 16); + /* Bits 9 to 3 of the frame buffer go into bits 7 to 1 + * of the register. Bit 0 is for setting tile mode or + * linear mode. A value of zero sets it to linear mode */ + vga_wcrt(VGABASE, 0x62, ((addr >> 3) & 0x7F) << 1); + vga_wcrt(VGABASE, 0x63, (addr >> 10) & 0xFF); + vga_wcrt(VGABASE, 0x64, (addr >> 18) & 0xFF); + svga_wcrt_mask(VGABASE, 0xA3, ((addr >> 26) & 0x07), 0x07); + + /* Load fetch count registers */ + pitch = ALIGN(crtc->mode.hdisplay * (fb->format->cpp[0] * 8) >> 3, 16); + load_value_to_registers(VGABASE, &iga->fetch, pitch >> 4); + + /* Set secondary pitch */ + pitch = ALIGN(fb->pitches[0], 16); + load_value_to_registers(VGABASE, &iga->offset, pitch >> 3); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static int via_primary_prepare_fb(struct drm_plane *plane, + struct drm_plane_state *new_state) +{ + struct drm_gem_object *gem; + struct ttm_buffer_object *ttm_bo; + struct via_bo *bo; + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (!new_state->fb) { + goto exit; + } + + gem = new_state->fb->obj[0]; + ttm_bo = container_of(gem, struct ttm_buffer_object, base); + bo = to_ttm_bo(ttm_bo); + + ret = ttm_bo_reserve(ttm_bo, true, false, NULL); + if (ret) { + goto exit; + } + + ret = via_bo_pin(bo, TTM_PL_VRAM); + ttm_bo_unreserve(ttm_bo); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static void via_primary_cleanup_fb(struct drm_plane *plane, + struct drm_plane_state *old_state) +{ + struct drm_gem_object *gem; + struct ttm_buffer_object *ttm_bo; + struct via_bo *bo; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (!old_state->fb) { + goto exit; + } + + gem = old_state->fb->obj[0]; + ttm_bo = container_of(gem, struct ttm_buffer_object, base); + bo = to_ttm_bo(ttm_bo); + + ret = ttm_bo_reserve(ttm_bo, true, false, NULL); + if (ret) { + goto exit; + } + + via_bo_unpin(bo); + ttm_bo_unreserve(ttm_bo); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static const struct drm_plane_helper_funcs +via_primary_drm_plane_helper_funcs = { + .prepare_fb = via_primary_prepare_fb, + .cleanup_fb = via_primary_cleanup_fb, + .atomic_check = via_primary_atomic_check, + .atomic_update = via_primary_atomic_update, + .atomic_disable = via_primary_atomic_disable, +}; + +static const struct drm_plane_funcs via_primary_drm_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + .reset = drm_atomic_helper_plane_reset, + .atomic_duplicate_state = + drm_atomic_helper_plane_duplicate_state, + .atomic_destroy_state = + drm_atomic_helper_plane_destroy_state, +}; + +static void via_crtc_param_init(struct via_drm_priv *dev_priv, + struct drm_crtc *crtc, + uint32_t index) +{ + struct drm_device *dev = &dev_priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_crtc *iga = container_of(crtc, + struct via_crtc, base); + + if (iga->index) { + iga->timings.htotal.count = ARRAY_SIZE(iga2_hor_total); + iga->timings.htotal.regs = iga2_hor_total; + + iga->timings.hdisplay.count = ARRAY_SIZE(iga2_hor_addr); + iga->timings.hdisplay.regs = iga2_hor_addr; + if (pdev->device != PCI_DEVICE_ID_VIA_VX900_VGA) + iga->timings.hdisplay.count--; + + iga->timings.hblank_start.count = ARRAY_SIZE(iga2_hor_blank_start); + iga->timings.hblank_start.regs = iga2_hor_blank_start; + if (pdev->device != PCI_DEVICE_ID_VIA_VX900_VGA) + iga->timings.hblank_start.count--; + + iga->timings.hblank_end.count = ARRAY_SIZE(iga2_hor_blank_end); + iga->timings.hblank_end.regs = iga2_hor_blank_end; + + iga->timings.hsync_start.count = ARRAY_SIZE(iga2_hor_sync_start); + iga->timings.hsync_start.regs = iga2_hor_sync_start; + if (pdev->device == PCI_DEVICE_ID_VIA_CLE266 + || pdev->device == PCI_DEVICE_ID_VIA_KM400) + iga->timings.hsync_start.count--; + + iga->timings.hsync_end.count = ARRAY_SIZE(iga2_hor_sync_end); + iga->timings.hsync_end.regs = iga2_hor_sync_end; + + iga->timings.vtotal.count = ARRAY_SIZE(iga2_ver_total); + iga->timings.vtotal.regs = iga2_ver_total; + + iga->timings.vdisplay.count = ARRAY_SIZE(iga2_ver_addr); + iga->timings.vdisplay.regs = iga2_ver_addr; + + iga->timings.vblank_start.count = ARRAY_SIZE(iga2_ver_blank_start); + iga->timings.vblank_start.regs = iga2_ver_blank_start; + + iga->timings.vblank_end.count = ARRAY_SIZE(iga2_ver_blank_end); + iga->timings.vblank_end.regs = iga2_ver_blank_end; + + iga->timings.vsync_start.count = ARRAY_SIZE(iga2_ver_sync_start); + iga->timings.vsync_start.regs = iga2_ver_sync_start; + + iga->timings.vsync_end.count = ARRAY_SIZE(iga2_ver_sync_end); + iga->timings.vsync_end.regs = iga2_ver_sync_end; + + /* Secondary FIFO setup */ + if ((pdev->device == PCI_DEVICE_ID_VIA_CLE266) || + (pdev->device == PCI_DEVICE_ID_VIA_KM400)) { + iga->fifo_depth.count = + ARRAY_SIZE(iga2_cle266_fifo_depth_select); + iga->fifo_depth.regs = iga2_cle266_fifo_depth_select; + + iga->threshold.count = + ARRAY_SIZE(iga2_cle266_fifo_threshold_select); + iga->threshold.regs = iga2_cle266_fifo_threshold_select; + } else { + iga->fifo_depth.count = ARRAY_SIZE(iga2_k8m800_fifo_depth_select); + iga->fifo_depth.regs = iga2_k8m800_fifo_depth_select; + + iga->threshold.count = ARRAY_SIZE(iga2_k8m800_fifo_threshold_select); + iga->threshold.regs = iga2_k8m800_fifo_threshold_select; + + iga->high_threshold.count = ARRAY_SIZE(iga2_fifo_high_threshold_select); + iga->high_threshold.regs = iga2_fifo_high_threshold_select; + + iga->display_queue.count = ARRAY_SIZE(iga2_display_queue_expire_num); + iga->display_queue.regs = iga2_display_queue_expire_num; + } + + iga->fetch.count = ARRAY_SIZE(iga2_fetch_count); + iga->fetch.regs = iga2_fetch_count; + + /* Older hardware only uses 12 bits */ + iga->offset.count = ARRAY_SIZE(iga2_offset) - 1; + iga->offset.regs = iga2_offset; + } else { + iga->timings.htotal.count = ARRAY_SIZE(iga1_hor_total); + iga->timings.htotal.regs = iga1_hor_total; + + iga->timings.hdisplay.count = ARRAY_SIZE(iga1_hor_addr); + iga->timings.hdisplay.regs = iga1_hor_addr; + if (pdev->device != PCI_DEVICE_ID_VIA_VX900_VGA) + iga->timings.hdisplay.count--; + + iga->timings.hblank_start.count = ARRAY_SIZE(iga1_hor_blank_start); + iga->timings.hblank_start.regs = iga1_hor_blank_start; + if (pdev->device != PCI_DEVICE_ID_VIA_VX900_VGA) + iga->timings.hblank_start.count--; + + iga->timings.hblank_end.count = ARRAY_SIZE(iga1_hor_blank_end); + iga->timings.hblank_end.regs = iga1_hor_blank_end; + + iga->timings.hsync_start.count = ARRAY_SIZE(iga1_hor_sync_start); + iga->timings.hsync_start.regs = iga1_hor_sync_start; + + iga->timings.hsync_end.count = ARRAY_SIZE(iga1_hor_sync_end); + iga->timings.hsync_end.regs = iga1_hor_sync_end; + + iga->timings.vtotal.count = ARRAY_SIZE(iga1_ver_total); + iga->timings.vtotal.regs = iga1_ver_total; + + iga->timings.vdisplay.count = ARRAY_SIZE(iga1_ver_addr); + iga->timings.vdisplay.regs = iga1_ver_addr; + + iga->timings.vblank_start.count = ARRAY_SIZE(iga1_ver_blank_start); + iga->timings.vblank_start.regs = iga1_ver_blank_start; + + iga->timings.vblank_end.count = ARRAY_SIZE(iga1_ver_blank_end); + iga->timings.vblank_end.regs = iga1_ver_blank_end; + + iga->timings.vsync_start.count = ARRAY_SIZE(iga1_ver_sync_start); + iga->timings.vsync_start.regs = iga1_ver_sync_start; + + iga->timings.vsync_end.count = ARRAY_SIZE(iga1_ver_sync_end); + iga->timings.vsync_end.regs = iga1_ver_sync_end; + + /* Primary FIFO setup */ + if ((pdev->device == PCI_DEVICE_ID_VIA_CLE266) || + (pdev->device == PCI_DEVICE_ID_VIA_KM400)) { + iga->fifo_depth.count = ARRAY_SIZE(iga1_cle266_fifo_depth_select); + iga->fifo_depth.regs = iga1_cle266_fifo_depth_select; + + iga->threshold.count = ARRAY_SIZE(iga1_cle266_fifo_threshold_select); + iga->threshold.regs = iga1_cle266_fifo_threshold_select; + + iga->high_threshold.count = ARRAY_SIZE(iga1_cle266_fifo_high_threshold_select); + iga->high_threshold.regs = iga1_cle266_fifo_high_threshold_select; + + iga->display_queue.count = ARRAY_SIZE(iga1_cle266_display_queue_expire_num); + iga->display_queue.regs = iga1_cle266_display_queue_expire_num; + } else { + iga->fifo_depth.count = ARRAY_SIZE(iga1_k8m800_fifo_depth_select); + iga->fifo_depth.regs = iga1_k8m800_fifo_depth_select; + + iga->threshold.count = ARRAY_SIZE(iga1_k8m800_fifo_threshold_select); + iga->threshold.regs = iga1_k8m800_fifo_threshold_select; + + iga->high_threshold.count = ARRAY_SIZE(iga1_k8m800_fifo_high_threshold_select); + iga->high_threshold.regs = iga1_k8m800_fifo_high_threshold_select; + + iga->display_queue.count = ARRAY_SIZE(iga1_k8m800_display_queue_expire_num); + iga->display_queue.regs = iga1_k8m800_display_queue_expire_num; + } + + iga->fetch.count = ARRAY_SIZE(iga1_fetch_count); + iga->fetch.regs = iga1_fetch_count; + + iga->offset.count = ARRAY_SIZE(iga1_offset); + iga->offset.regs = iga1_offset; + } +} + +static int via_gamma_init(struct drm_crtc *crtc) +{ + u16 *gamma; + uint32_t i; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + ret = drm_mode_crtc_set_gamma_size(crtc, 256); + if (ret) { + DRM_ERROR("Failed to set gamma size!\n"); + goto exit; + } + + gamma = crtc->gamma_store; + for (i = 0; i < 256; i++) { + gamma[i] = i << 8 | i; + gamma[i + 256] = i << 8 | i; + gamma[i + 512] = i << 8 | i; + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static const uint32_t via_primary_formats[] = { + DRM_FORMAT_XRGB8888, + DRM_FORMAT_ARGB8888, + DRM_FORMAT_RGB888, + DRM_FORMAT_RGB565, + DRM_FORMAT_RGB332, +}; + +int via_crtc_init(struct via_drm_priv *dev_priv, uint32_t index) +{ + struct drm_device *dev = &dev_priv->dev; + struct via_crtc *iga; + struct drm_plane *primary; + struct drm_plane *cursor; + uint32_t possible_crtcs; + int ret; + + possible_crtcs = 1 << index; + + primary = kzalloc(sizeof(struct drm_plane), GFP_KERNEL); + if (!primary) { + ret = -ENOMEM; + DRM_ERROR("Failed to allocate a primary plane.\n"); + goto exit; + } + + drm_plane_helper_add(primary, + &via_primary_drm_plane_helper_funcs); + ret = drm_universal_plane_init(dev, primary, possible_crtcs, + &via_primary_drm_plane_funcs, + via_primary_formats, + ARRAY_SIZE(via_primary_formats), + NULL, DRM_PLANE_TYPE_PRIMARY, NULL); + if (ret) { + DRM_ERROR("Failed to initialize a primary " + "plane.\n"); + goto free_primary; + } + + cursor = kzalloc(sizeof(struct drm_plane), GFP_KERNEL); + if (!cursor) { + ret = -ENOMEM; + DRM_ERROR("Failed to allocate a cursor plane.\n"); + goto cleanup_primary; + } + + drm_plane_helper_add(cursor, + &via_cursor_drm_plane_helper_funcs); + ret = drm_universal_plane_init(dev, cursor, possible_crtcs, + &via_cursor_drm_plane_funcs, + via_cursor_formats, + via_cursor_formats_size, + NULL, DRM_PLANE_TYPE_CURSOR, NULL); + if (ret) { + DRM_ERROR("Failed to initialize a cursor " + "plane.\n"); + goto free_cursor; + } + + iga = kzalloc(sizeof(struct via_crtc), GFP_KERNEL); + if (!iga) { + ret = -ENOMEM; + DRM_ERROR("Failed to allocate CRTC storage.\n"); + goto cleanup_cursor; + } + + drm_crtc_helper_add(&iga->base, + &via_drm_crtc_helper_funcs); + ret = drm_crtc_init_with_planes(dev, &iga->base, + primary, cursor, + &via_drm_crtc_funcs, + NULL); + if (ret) { + DRM_ERROR("Failed to initialize CRTC!\n"); + goto free_crtc; + } + + iga->index = index; + + via_crtc_param_init(dev_priv, &iga->base, index); + ret = via_gamma_init(&iga->base); + if (ret) { + goto free_crtc; + } + + goto exit; +free_crtc: + kfree(iga); +cleanup_cursor: + drm_plane_cleanup(cursor); +free_cursor: + kfree(cursor); +cleanup_primary: + drm_plane_cleanup(primary); +free_primary: + kfree(primary); +exit: + return ret; +} -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 07/28] drm/via: Add via_crtc_hw.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (5 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 06/28] drm/via: Add via_crtc.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 08/28] drm/via: Add via_cursor.c Kevin Brace ` (13 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_crtc_hw.c | 91 +++++++++++++++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 drivers/gpu/drm/via/via_crtc_hw.c diff --git a/drivers/gpu/drm/via/via_crtc_hw.c b/drivers/gpu/drm/via/via_crtc_hw.c new file mode 100644 index 000000000000..f5446da52c0f --- /dev/null +++ b/drivers/gpu/drm/via/via_crtc_hw.c @@ -0,0 +1,91 @@ +/* + * Copyright 2012 James Simmons. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * James Simmons <jsimmons@infradead.org> + */ + +#include <video/vga.h> + +#include "via_crtc_hw.h" + +/* + * load_register_table enables the ability to set entire + * tables of registers. For each register defined by the + * port and the index for that register is programmed + * with a masked value. + */ +void +load_register_tables(void __iomem *regbase, struct vga_registers *regs) +{ + u8 cr_index, orig, reg_mask, data; + unsigned int i; + u16 port; + + for (i = 0; i < regs->count; i++) { + reg_mask = regs->regs[i].start_bit; + data = regs->regs[i].end_bit; + cr_index = regs->regs[i].io_addr; + port = regs->regs[i].ioport; + + vga_w(regbase, port, cr_index); + orig = (vga_r(regbase, port + 1) & ~reg_mask); + vga_w(regbase, port + 1, ((data & reg_mask) | orig)); + } +} + +/* + * Due to the limitation of how much data you can write to a single + * register we run into data that can't be written in only one register. + * So load_value_to_register was developed to be able to define register + * tables that can load different bit ranges of the data to different + * registers. + */ +void +load_value_to_registers(void __iomem *regbase, struct vga_registers *regs, + unsigned int value) +{ + unsigned int bit_num = 0, shift_next_reg, reg_mask; + u8 start_index, end_index, cr_index, orig; + unsigned int data, i, j; + u16 get_bit, port; + + for (i = 0; i < regs->count; i++) { + start_index = regs->regs[i].start_bit; + end_index = regs->regs[i].end_bit; + cr_index = regs->regs[i].io_addr; + port = regs->regs[i].ioport; + reg_mask = data = 0; + + shift_next_reg = bit_num; + for (j = start_index; j <= end_index; j++) { + reg_mask = reg_mask | (1 << j); + get_bit = (value & (1 << bit_num)); + data |= ((get_bit >> shift_next_reg) << start_index); + bit_num++; + } + + vga_w(regbase, port, cr_index); + orig = (vga_r(regbase, port + 1) & ~reg_mask); + vga_w(regbase, port + 1, ((data & reg_mask) | orig)); + } +} -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 08/28] drm/via: Add via_cursor.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (6 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 07/28] drm/via: Add via_crtc_hw.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-25 6:59 ` Sam Ravnborg 2022-06-24 20:26 ` [PATCH 09/28] drm/via: Add via_dac.c Kevin Brace ` (12 subsequent siblings) 20 siblings, 1 reply; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_cursor.c | 419 +++++++++++++++++++++++++++++++ 1 file changed, 419 insertions(+) create mode 100644 drivers/gpu/drm/via/via_cursor.c diff --git a/drivers/gpu/drm/via/via_cursor.c b/drivers/gpu/drm/via/via_cursor.c new file mode 100644 index 000000000000..9a6bce1cf922 --- /dev/null +++ b/drivers/gpu/drm/via/via_cursor.c @@ -0,0 +1,419 @@ +/* + * Copyright © 2019-2020 Kevin Brace. + * Copyright 2012 James Simmons. All Rights Reserved. + * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2009 S3 Graphics, Inc. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * Kevin Brace <kevinbrace@bracecomputerlab.com> + * James Simmons <jsimmons@infradead.org> + */ + +#include <linux/pci.h> +#include <linux/pci_ids.h> + +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_crtc.h> +#include <drm/drm_fourcc.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_gem.h> +#include <drm/drm_mode.h> +#include <drm/drm_modeset_helper_vtables.h> +#include <drm/drm_plane.h> +#include <drm/drm_plane_helper.h> + +#include <drm/ttm/ttm_bo_api.h> +#include <drm/ttm/ttm_bo_driver.h> + +#include "via_drv.h" + + +static void via_hide_cursor(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_crtc *iga = container_of(crtc, + struct via_crtc, base); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + uint32_t temp; + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_VT3157: + case PCI_DEVICE_ID_VIA_VT3343: + case PCI_DEVICE_ID_VIA_P4M900: + case PCI_DEVICE_ID_VIA_VT1122: + case PCI_DEVICE_ID_VIA_VX875: + case PCI_DEVICE_ID_VIA_VX900_VGA: + if (iga->index) { + temp = VIA_READ(HI_CONTROL); + VIA_WRITE(HI_CONTROL, temp & 0xFFFFFFFA); + } else { + temp = VIA_READ(PRIM_HI_CTRL); + VIA_WRITE(PRIM_HI_CTRL, temp & 0xFFFFFFFA); + } + + break; + default: + temp = VIA_READ(HI_CONTROL); + VIA_WRITE(HI_CONTROL, temp & 0xFFFFFFFA); + break; + } +} + +static void via_show_cursor(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_crtc *iga = container_of(crtc, + struct via_crtc, base); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_VT3157: + case PCI_DEVICE_ID_VIA_VT3343: + case PCI_DEVICE_ID_VIA_P4M900: + case PCI_DEVICE_ID_VIA_VT1122: + case PCI_DEVICE_ID_VIA_VX875: + case PCI_DEVICE_ID_VIA_VX900_VGA: + /* + * Program Hardware Icon (HI) FIFO, foreground color, + * and background color. + */ + if (iga->index) { + VIA_WRITE(HI_TRANSPARENT_COLOR, 0x00000000); + VIA_WRITE(HI_INVTCOLOR, 0x00FFFFFF); + VIA_WRITE(ALPHA_V3_PREFIFO_CONTROL, + 0x000E0000); + VIA_WRITE(ALPHA_V3_FIFO_CONTROL, 0x0E0F0000); + } else { + VIA_WRITE(PRIM_HI_TRANSCOLOR, 0x00000000); + VIA_WRITE(PRIM_HI_INVTCOLOR, 0x00FFFFFF); + VIA_WRITE(V327_HI_INVTCOLOR, 0x00FFFFFF); + VIA_WRITE(PRIM_HI_FIFO, 0x0D000D0F); + } + + break; + default: + /* + * Program Hardware Icon (HI) FIFO, foreground color, + * and background color. + */ + VIA_WRITE(HI_TRANSPARENT_COLOR, 0x00000000); + VIA_WRITE(HI_INVTCOLOR, 0x00FFFFFF); + VIA_WRITE(ALPHA_V3_PREFIFO_CONTROL, 0x000E0000); + VIA_WRITE(ALPHA_V3_FIFO_CONTROL, 0xE0F0000); + break; + } + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_VT3157: + case PCI_DEVICE_ID_VIA_VT3343: + case PCI_DEVICE_ID_VIA_P4M900: + case PCI_DEVICE_ID_VIA_VT1122: + case PCI_DEVICE_ID_VIA_VX875: + case PCI_DEVICE_ID_VIA_VX900_VGA: + /* + * Turn on Hardware Icon (HI). + */ + if (iga->index) { + VIA_WRITE(HI_CONTROL, 0xB6000005); + } else { + VIA_WRITE(PRIM_HI_CTRL, 0x36000005); + } + + break; + default: + /* + * Turn on Hardware Icon (HI). + */ + if (iga->index) { + VIA_WRITE(HI_CONTROL, 0xB6000005); + } else { + VIA_WRITE(HI_CONTROL, 0x36000005); + } + + break; + } +} + +static void via_cursor_address(struct drm_crtc *crtc, + struct ttm_buffer_object *ttm_bo) +{ + struct drm_device *dev = crtc->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_crtc *iga = container_of(crtc, + struct via_crtc, base); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_VT3157: + case PCI_DEVICE_ID_VIA_VT3343: + case PCI_DEVICE_ID_VIA_P4M900: + case PCI_DEVICE_ID_VIA_VT1122: + case PCI_DEVICE_ID_VIA_VX875: + case PCI_DEVICE_ID_VIA_VX900_VGA: + /* + * Program Hardware Icon (HI) offset. + */ + if (iga->index) { + VIA_WRITE(HI_FBOFFSET, + ttm_bo->resource->start << PAGE_SHIFT); + } else { + VIA_WRITE(PRIM_HI_FBOFFSET, + ttm_bo->resource->start << PAGE_SHIFT); + } + break; + default: + /* + * Program Hardware Icon (HI) offset. + */ + VIA_WRITE(HI_FBOFFSET, ttm_bo->resource->start << PAGE_SHIFT); + break; + } + + return; +} + +static void via_set_hi_location(struct drm_crtc *crtc, int crtc_x, int crtc_y) +{ + struct drm_device *dev = crtc->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_crtc *iga = container_of(crtc, + struct via_crtc, base); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + uint32_t location_x = 0, location_y = 0; + uint32_t offset_x = 0, offset_y = 0; + + if (crtc_x < 0) { + offset_x = -crtc_x; + } else { + location_x = crtc_x; + } + + if (crtc_y < 0) { + offset_y = -crtc_y; + } else { + location_y = crtc_y; + } + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_VT3157: + case PCI_DEVICE_ID_VIA_VT3343: + case PCI_DEVICE_ID_VIA_P4M900: + case PCI_DEVICE_ID_VIA_VT1122: + case PCI_DEVICE_ID_VIA_VX875: + case PCI_DEVICE_ID_VIA_VX900_VGA: + if (iga->index) { + VIA_WRITE(HI_POSSTART, + (((location_x & 0x07ff) << 16) | + (location_y & 0x07ff))); + VIA_WRITE(HI_CENTEROFFSET, + (((offset_x & 0x07ff) << 16) | + (offset_y & 0x07ff))); + } else { + VIA_WRITE(PRIM_HI_POSSTART, + (((location_x & 0x07ff) << 16) | + (location_y & 0x07ff))); + VIA_WRITE(PRIM_HI_CENTEROFFSET, + (((offset_x & 0x07ff) << 16) | + (offset_y & 0x07ff))); + } + + break; + default: + VIA_WRITE(HI_POSSTART, + (((location_x & 0x07ff) << 16) | + (location_y & 0x07ff))); + VIA_WRITE(HI_CENTEROFFSET, + (((offset_x & 0x07ff) << 16) | + (offset_y & 0x07ff))); + break; + } +} + +static int via_cursor_prepare_fb(struct drm_plane *plane, + struct drm_plane_state *new_state) +{ + struct drm_gem_object *gem; + struct ttm_buffer_object *ttm_bo; + struct via_bo *bo; + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (!new_state->fb) { + goto exit; + } + + gem = new_state->fb->obj[0]; + ttm_bo = container_of(gem, struct ttm_buffer_object, base); + bo = to_ttm_bo(ttm_bo); + + ret = ttm_bo_reserve(ttm_bo, true, false, NULL); + if (ret) { + goto exit; + } + + ret = via_bo_pin(bo, TTM_PL_VRAM); + ttm_bo_unreserve(ttm_bo); + ret = ttm_bo_kmap(ttm_bo, 0, ttm_bo->resource->num_pages, &bo->kmap); + if (ret) { + goto exit; + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static void via_cursor_cleanup_fb(struct drm_plane *plane, + struct drm_plane_state *old_state) +{ + struct drm_gem_object *gem; + struct ttm_buffer_object *ttm_bo; + struct via_bo *bo; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (!old_state->fb) { + goto exit; + } + + gem = old_state->fb->obj[0]; + ttm_bo = container_of(gem, struct ttm_buffer_object, base); + bo = to_ttm_bo(ttm_bo); + + ttm_bo_kunmap(&bo->kmap); + ret = ttm_bo_reserve(ttm_bo, true, false, NULL); + if (ret) { + goto exit; + } + + via_bo_unpin(bo); + ttm_bo_unreserve(ttm_bo); + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static int via_cursor_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_plane_state = + drm_atomic_get_new_plane_state(state, plane); + struct drm_crtc_state *new_crtc_state; + struct drm_framebuffer *fb = new_plane_state->fb; + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if ((!new_plane_state->crtc) || (!new_plane_state->visible)) { + goto exit; + } + + if (fb->width != fb->height) { + DRM_ERROR("Hardware cursor is expected to have " + "square dimensions.\n"); + ret = -EINVAL; + goto exit; + } + + new_crtc_state = drm_atomic_get_new_crtc_state(state, + new_plane_state->crtc); + ret = drm_atomic_helper_check_plane_state( + new_plane_state, + new_crtc_state, + DRM_PLANE_HELPER_NO_SCALING, + DRM_PLANE_HELPER_NO_SCALING, + true, true); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static void via_cursor_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_state = + drm_atomic_get_new_plane_state(state, plane); + struct drm_plane_state *old_state = + drm_atomic_get_old_plane_state(state, plane); + struct drm_crtc *crtc = new_state->crtc; + struct drm_gem_object *gem; + struct ttm_buffer_object *ttm_bo; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (new_state->fb != old_state->fb) { + gem = new_state->fb->obj[0]; + ttm_bo = container_of(gem, struct ttm_buffer_object, base); + via_cursor_address(crtc, ttm_bo); + } + + via_set_hi_location(crtc, new_state->crtc_x, new_state->crtc_y); + via_show_cursor(crtc); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +void via_cursor_atomic_disable(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_state = + drm_atomic_get_new_plane_state(state, plane); + struct drm_crtc *crtc = new_state->crtc; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (crtc) { + via_hide_cursor(crtc); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +const struct drm_plane_helper_funcs via_cursor_drm_plane_helper_funcs = { + .prepare_fb = via_cursor_prepare_fb, + .cleanup_fb = via_cursor_cleanup_fb, + .atomic_check = via_cursor_atomic_check, + .atomic_update = via_cursor_atomic_update, + .atomic_disable = via_cursor_atomic_disable, +}; + +const struct drm_plane_funcs via_cursor_drm_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + .reset = drm_atomic_helper_plane_reset, + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, +}; + +const uint32_t via_cursor_formats[] = { + DRM_FORMAT_ARGB8888, +}; + +const unsigned int via_cursor_formats_size = + ARRAY_SIZE(via_cursor_formats); -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [PATCH 08/28] drm/via: Add via_cursor.c 2022-06-24 20:26 ` [PATCH 08/28] drm/via: Add via_cursor.c Kevin Brace @ 2022-06-25 6:59 ` Sam Ravnborg 0 siblings, 0 replies; 34+ messages in thread From: Sam Ravnborg @ 2022-06-25 6:59 UTC (permalink / raw) To: Kevin Brace; +Cc: Kevin Brace, dri-devel Hi Kevin, a few nitpicks in the following. Sam On Fri, Jun 24, 2022 at 03:26:13PM -0500, Kevin Brace wrote: > From: Kevin Brace <kevinbrace@bracecomputerlab.com> > > Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> > --- > drivers/gpu/drm/via/via_cursor.c | 419 +++++++++++++++++++++++++++++++ > 1 file changed, 419 insertions(+) > create mode 100644 drivers/gpu/drm/via/via_cursor.c > > + DRM_DEBUG_KMS("Exiting %s.\n", __func__); The use of the DRM_* for logging is deprecated these days. The recommended variants are names drm_dbg_* and friends. They require a drm_device, and in lack of this use dev_dbg or fallback to pr_* This applies for all the driver, not only this file. > + > +const struct drm_plane_funcs via_cursor_drm_plane_funcs = { > + .update_plane = drm_atomic_helper_update_plane, > + .disable_plane = drm_atomic_helper_disable_plane, > + .destroy = drm_plane_cleanup, > + .reset = drm_atomic_helper_plane_reset, > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, > +}; > + > +const uint32_t via_cursor_formats[] = { > + DRM_FORMAT_ARGB8888, > +}; > + > +const unsigned int via_cursor_formats_size = > + ARRAY_SIZE(via_cursor_formats); The three variables above does not reference anything in this file and can be moved to the file with the single user. Sam ^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH 09/28] drm/via: Add via_dac.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (7 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 08/28] drm/via: Add via_cursor.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 10/28] drm/via: Add via_display.c Kevin Brace ` (11 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_dac.c | 504 ++++++++++++++++++++++++++++++++++ 1 file changed, 504 insertions(+) create mode 100644 drivers/gpu/drm/via/via_dac.c diff --git a/drivers/gpu/drm/via/via_dac.c b/drivers/gpu/drm/via/via_dac.c new file mode 100644 index 000000000000..4921c93d1089 --- /dev/null +++ b/drivers/gpu/drm/via/via_dac.c @@ -0,0 +1,504 @@ +/* + * Copyright © 2016-2018 Kevin Brace. + * Copyright 2012 James Simmons. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * Kevin Brace <kevinbrace@bracecomputerlab.com> + * James Simmons <jsimmons@infradead.org> + */ + +#include <linux/pci.h> + +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_probe_helper.h> + +#include "via_crtc_hw.h" +#include "via_drv.h" + + +/* + * Enables or disables DAC (VGA) output. + */ +static void via_dac_power(struct via_drm_priv *dev_priv, bool outputState) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + + via_dac_set_power(VGABASE, outputState); + DRM_INFO("DAC (VGA) Power: %s\n", + outputState ? "On" : "Off"); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +/* + * Set DAC (VGA) sync polarity. + */ +static void via_dac_sync_polarity(struct via_drm_priv *dev_priv, + unsigned int flags) +{ + u8 syncPolarity = 0x00; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (flags & DRM_MODE_FLAG_NHSYNC) { + syncPolarity |= BIT(0); + } + + if (flags & DRM_MODE_FLAG_NVSYNC) { + syncPolarity |= BIT(1); + } + + via_dac_set_sync_polarity(VGABASE, syncPolarity); + DRM_INFO("DAC (VGA) Horizontal Sync Polarity: %s\n", + (syncPolarity & BIT(0)) ? "-" : "+"); + DRM_INFO("DAC (VGA) Vertical Sync Polarity: %s\n", + (syncPolarity & BIT(1)) ? "-" : "+"); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +/* + * Sets DAC (VGA) display source. + */ +static void via_dac_display_source(struct via_drm_priv *dev_priv, + int index) +{ + u8 displaySource = index; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + via_dac_set_display_source(VGABASE, displaySource & 0x01); + DRM_INFO("DAC (VGA) Display Source: IGA%d\n", + (displaySource & 0x01) + 1); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +/* + * Routines for controlling stuff on the DAC port + */ +static const struct drm_encoder_funcs via_dac_enc_funcs = { + .destroy = via_encoder_cleanup, +}; + +/* + * Manage the power state of DAC (VGA). + */ +static void via_dac_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch (mode) { + case DRM_MODE_DPMS_ON: + via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_ON); + via_dac_power(dev_priv, true); + break; + case DRM_MODE_DPMS_STANDBY: + via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_STANDBY); + via_dac_power(dev_priv, true); + break; + case DRM_MODE_DPMS_SUSPEND: + via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_SUSPEND); + via_dac_power(dev_priv, true); + break; + case DRM_MODE_DPMS_OFF: + via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_OFF); + via_dac_power(dev_priv, false); + break; + default: + DRM_ERROR("Bad DPMS mode."); + break; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +/* Pass our mode to the connectors and the CRTC to give them a chance to + * adjust it according to limitations or connector properties, and also + * a chance to reject the mode entirely. Useful for things like scaling. + */ +static bool via_dac_mode_fixup(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + drm_mode_set_crtcinfo(adjusted_mode, 0); + return true; +} + +/* + * Handle DAC (VGA) mode setting. + */ +static void via_dac_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct via_crtc *iga = container_of(encoder->crtc, struct via_crtc, base); + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + via_dac_sync_polarity(dev_priv, adjusted_mode->flags); + via_dac_display_source(dev_priv, iga->index); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_dac_prepare(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (encoder->crtc) { + via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_OFF); + via_dac_power(dev_priv, false); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_dac_commit(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (encoder->crtc) { + via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_ON); + via_dac_power(dev_priv, true); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_dac_disable(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + via_dac_set_dpms_control(VGABASE, VIA_DAC_DPMS_OFF); + via_dac_power(dev_priv, false); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static const struct drm_encoder_helper_funcs via_dac_enc_helper_funcs = { + .dpms = via_dac_dpms, + .mode_fixup = via_dac_mode_fixup, + .mode_set = via_dac_mode_set, + .prepare = via_dac_prepare, + .commit = via_dac_commit, + .disable = via_dac_disable, +}; + +static enum drm_connector_status +via_dac_detect(struct drm_connector *connector, bool force) +{ + struct via_connector *con = container_of(connector, + struct via_connector, base); + enum drm_connector_status ret = connector_status_disconnected; + struct i2c_adapter *i2c_bus; + struct edid *edid = NULL; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (con->i2c_bus & VIA_I2C_BUS1) { + i2c_bus = via_find_ddc_bus(0x26); + } else { + i2c_bus = NULL; + } + + if (i2c_bus) { + edid = drm_get_edid(&con->base, i2c_bus); + if (edid) { + if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) { + ret = connector_status_connected; + } + + kfree(edid); + goto exit; + } + } + + if (con->i2c_bus & VIA_I2C_BUS2) { + i2c_bus = via_find_ddc_bus(0x31); + } else { + i2c_bus = NULL; + } + + if (i2c_bus) { + edid = drm_get_edid(&con->base, i2c_bus); + if (edid) { + if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) { + ret = connector_status_connected; + } + + kfree(edid); + goto exit; + } + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static const struct drm_connector_funcs via_dac_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = via_dac_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = via_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = + drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = + drm_atomic_helper_connector_destroy_state, +}; + +static enum drm_mode_status via_dac_mode_valid( + struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct drm_device *dev = connector->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + int min_clock, max_clock; + enum drm_mode_status status = MODE_OK; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + min_clock = 25000; + switch (pdev->device) { + /* CLE266 Chipset */ + case PCI_DEVICE_ID_VIA_CLE266: + /* KM400(A) / KN400(A) / P4M800 Chipset */ + case PCI_DEVICE_ID_VIA_KM400: + max_clock = 250000; + break; + /* K8M800(A) / K8N800(A) Chipset */ + case PCI_DEVICE_ID_VIA_K8M800: + /* P4M800 Pro / P4M800CE / VN800 / CN700 / CN333 / CN400 Chipset */ + case PCI_DEVICE_ID_VIA_CN700: + max_clock = 300000; + break; + /* PM800 / PN800 / PM880 / PN880 Chipset */ + case PCI_DEVICE_ID_VIA_PM800: + /* P4M890 / P4N890 Chipset */ + case PCI_DEVICE_ID_VIA_VT3343: + /* K8M890 / K8N890 Chipset */ + case PCI_DEVICE_ID_VIA_K8M890: + /* P4M900 / VN896 / CN896 Chipset */ + case PCI_DEVICE_ID_VIA_P4M900: + /* CX700(M/M2) / VX700(M/M2) Chipset */ + case PCI_DEVICE_ID_VIA_VT3157: + /* VX800 / VX820 Chipset */ + case PCI_DEVICE_ID_VIA_VT1122: + /* VX855 / VX875 Chipset */ + case PCI_DEVICE_ID_VIA_VX875: + /* VX900(H) Chipset */ + case PCI_DEVICE_ID_VIA_VX900_VGA: + max_clock = 350000; + break; + /* Illegal condition (should never get here) */ + default: + max_clock = 0; + break; + } + + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) { + status = MODE_NO_DBLESCAN; + goto exit; + } + + if (mode->clock < min_clock) { + status = MODE_CLOCK_LOW; + goto exit; + } + + if (mode->clock > max_clock) { + status = MODE_CLOCK_HIGH; + goto exit; + } + +exit: + DRM_DEBUG_KMS("status: %u\n", status); + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return status; +} + +static int via_dac_get_modes(struct drm_connector *connector) +{ + struct via_connector *con = container_of(connector, + struct via_connector, base); + int count = 0; + struct i2c_adapter *i2c_bus; + struct edid *edid = NULL; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (con->i2c_bus & VIA_I2C_BUS1) { + i2c_bus = via_find_ddc_bus(0x26); + } else { + i2c_bus = NULL; + } + + if (i2c_bus) { + edid = drm_get_edid(&con->base, i2c_bus); + if (edid) { + if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) { + drm_connector_update_edid_property(connector, + edid); + count = drm_add_edid_modes(connector, edid); + } + + kfree(edid); + goto exit; + } + } + + if (con->i2c_bus & VIA_I2C_BUS2) { + i2c_bus = via_find_ddc_bus(0x31); + } else { + i2c_bus = NULL; + } + + if (i2c_bus) { + edid = drm_get_edid(&con->base, i2c_bus); + if (edid) { + if (!(edid->input & DRM_EDID_INPUT_DIGITAL)) { + drm_connector_update_edid_property(connector, + edid); + count = drm_add_edid_modes(connector, edid); + } + + kfree(edid); + goto exit; + } + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return count; +} + +static const struct drm_connector_helper_funcs +via_dac_connector_helper_funcs = { + .mode_valid = via_dac_mode_valid, + .get_modes = via_dac_get_modes, +}; + +void via_dac_probe(struct drm_device *dev) +{ + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + u16 chipset = pdev->device; + u8 sr13, sr5a; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch (chipset) { + case PCI_DEVICE_ID_VIA_VT3157: + case PCI_DEVICE_ID_VIA_VT1122: + case PCI_DEVICE_ID_VIA_VX875: + case PCI_DEVICE_ID_VIA_VX900_VGA: + sr5a = vga_rseq(VGABASE, 0x5a); + DRM_DEBUG_KMS("SR5A: 0x%02x\n", sr5a); + + /* Setting SR5A[0] to 1. + * This allows the reading out the alternative + * pin strapping information from SR12 and SR13. */ + svga_wseq_mask(VGABASE, 0x5a, BIT(0), BIT(0)); + DRM_DEBUG_KMS("SR5A: 0x%02x\n", sr5a); + + sr13 = vga_rseq(VGABASE, 0x13); + DRM_DEBUG_KMS("SR13: 0x%02x\n", sr13); + + if (!(sr13 & BIT(2))) { + dev_priv->dac_presence = true; + DRM_DEBUG_KMS("Detected the presence of VGA.\n"); + } else { + dev_priv->dac_presence = false; + } + + /* Restore SR5A. */ + vga_wseq(VGABASE, 0x5a, sr5a); + break; + default: + dev_priv->dac_presence = true; + DRM_DEBUG_KMS("Detected the presence of VGA.\n"); + break; + } + + dev_priv->dac_i2c_bus = VIA_I2C_NONE; + + if (dev_priv->dac_presence) { + dev_priv->dac_i2c_bus = VIA_I2C_BUS2 | VIA_I2C_BUS1; + } + + dev_priv->mapped_i2c_bus |= dev_priv->dac_i2c_bus; + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +void via_dac_init(struct drm_device *dev) +{ + struct via_connector *con; + struct via_encoder *enc; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + enc = kzalloc(sizeof(*enc) + sizeof(*con), GFP_KERNEL); + if (!enc) { + DRM_ERROR("Failed to allocate connector and encoder\n"); + return; + } + con = &enc->cons[0]; + INIT_LIST_HEAD(&con->props); + + /* Piece together our connector */ + drm_connector_init(dev, &con->base, &via_dac_connector_funcs, + DRM_MODE_CONNECTOR_VGA); + drm_connector_helper_add(&con->base, &via_dac_connector_helper_funcs); + drm_connector_register(&con->base); + + con->i2c_bus = dev_priv->dac_i2c_bus; + con->base.doublescan_allowed = false; + con->base.interlace_allowed = true; + + /* Setup the encoders and attach them */ + drm_encoder_init(dev, &enc->base, &via_dac_enc_funcs, + DRM_MODE_ENCODER_DAC, NULL); + drm_encoder_helper_add(&enc->base, &via_dac_enc_helper_funcs); + + enc->base.possible_crtcs = BIT(1) | BIT(0); + enc->base.possible_clones = 0; + enc->di_port = VIA_DI_PORT_NONE; + + drm_connector_attach_encoder(&con->base, &enc->base); +} -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 10/28] drm/via: Add via_display.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (8 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 09/28] drm/via: Add via_dac.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 11/28] drm/via: Add via_drv.c Kevin Brace ` (10 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_display.c | 125 ++++++++++++++++++++++++++++++ 1 file changed, 125 insertions(+) create mode 100644 drivers/gpu/drm/via/via_display.c diff --git a/drivers/gpu/drm/via/via_display.c b/drivers/gpu/drm/via/via_display.c new file mode 100644 index 000000000000..2f82764038c0 --- /dev/null +++ b/drivers/gpu/drm/via/via_display.c @@ -0,0 +1,125 @@ +/* + * Copyright © 2017-2020 Kevin Brace. + * Copyright 2012 James Simmons. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * Kevin Brace <kevinbrace@bracecomputerlab.com> + * James Simmons <jsimmons@infradead.org> + */ + +#include <linux/pci.h> + +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_probe_helper.h> + +#include "via_drv.h" + +void via_encoder_cleanup(struct drm_encoder *encoder) +{ + struct via_encoder *enc = container_of(encoder, struct via_encoder, base); + + drm_encoder_cleanup(encoder); + kfree(enc); +} + +void via_connector_destroy(struct drm_connector *connector) +{ + struct via_connector *con = container_of(connector, struct via_connector, base); + struct drm_property *property, *tmp; + + list_for_each_entry_safe(property, tmp, &con->props, head) + drm_property_destroy(connector->dev, property); + list_del(&con->props); + + drm_connector_update_edid_property(connector, NULL); + drm_connector_unregister(connector); + drm_connector_cleanup(connector); +} + +int via_modeset_init(struct drm_device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + uint32_t i; + int ret = 0; + + via_mode_config_init(dev_priv); + + /* Initialize the number of display connectors. */ + dev_priv->number_fp = 0; + dev_priv->number_dvi = 0; + + via_i2c_reg_init(dev_priv); + ret = via_i2c_init(dev); + if (ret) { + DRM_ERROR("Failed to initialize I2C bus!\n"); + goto exit; + } + + for (i = 0; i < VIA_MAX_CRTC; i++) { + ret = via_crtc_init(dev_priv, i); + if (ret) { + goto exit; + } + } + + via_ext_dvi_probe(dev); + via_tmds_probe(dev); + + via_lvds_probe(dev); + + via_dac_probe(dev); + + + via_ext_dvi_init(dev); + via_tmds_init(dev); + + via_dac_init(dev); + + via_lvds_init(dev); + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_VX900_VGA: + via_hdmi_init(dev, VIA_DI_PORT_NONE); + break; + default: + break; + } + + drm_mode_config_reset(dev); + + drm_kms_helper_poll_init(dev); +exit: + return ret; +} + +void via_modeset_fini(struct drm_device *dev) +{ + drm_kms_helper_poll_fini(dev); + + drm_helper_force_disable_all(dev); + + drm_mode_config_cleanup(dev); + + via_i2c_exit(); +} -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 11/28] drm/via: Add via_drv.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (9 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 10/28] drm/via: Add via_display.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-25 7:15 ` Sam Ravnborg 2022-06-24 20:26 ` [PATCH 12/28] drm/via: Add via_encoder.c Kevin Brace ` (9 subsequent siblings) 20 siblings, 1 reply; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Note that GPL is chosen as a license type. This is due to via_i2c.c being GPL based. Everything else is MIT license based. Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_drv.c | 313 ++++++++++++++++++++++++++++++++++ 1 file changed, 313 insertions(+) create mode 100644 drivers/gpu/drm/via/via_drv.c diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c new file mode 100644 index 000000000000..25d7967c938b --- /dev/null +++ b/drivers/gpu/drm/via/via_drv.c @@ -0,0 +1,313 @@ +/* + * Copyright © 2019-2021 Kevin Brace. + * Copyright 2012 James Simmons. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * Kevin Brace <kevinbrace@bracecomputerlab.com> + * James Simmons <jsimmons@infradead.org> + */ + +#include <linux/pci.h> + +#include <drm/drm_aperture.h> +#include <drm/drm_drv.h> +#include <drm/drm_fb_helper.h> +#include <drm/drm_file.h> +#include <drm/drm_gem.h> +#include <drm/drm_ioctl.h> +#include <drm/drm_pciids.h> +#include <drm/drm_prime.h> + +#include <drm/ttm/ttm_bo_api.h> + +#include "via_drv.h" + + +extern const struct drm_ioctl_desc via_driver_ioctls[]; + +/* + * For now, this device driver will be disabled, unless the + * user decides to enable it. + */ +int via_modeset = 0; + +MODULE_PARM_DESC(modeset, "Enable DRM device driver " + "(Default: Disabled, " + "0 = Disabled," + "1 = Enabled)"); +module_param_named(modeset, via_modeset, int, 0400); + +static int via_driver_open(struct drm_device *dev, + struct drm_file *file_priv) +{ + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static void via_driver_postclose(struct drm_device *dev, + struct drm_file *file_priv) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_driver_lastclose(struct drm_device *dev) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + drm_fb_helper_lastclose(dev); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static int via_driver_dumb_create(struct drm_file *file_priv, + struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + struct ttm_buffer_object *ttm_bo; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct via_bo *bo; + uint32_t handle, pitch; + uint64_t size; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* + * Calculate the parameters for the dumb buffer. + */ + pitch = args->width * ((args->bpp + 7) >> 3); + size = pitch * args->height; + + ret = via_bo_create(dev, &dev_priv->bdev, size, + ttm_bo_type_device, TTM_PL_VRAM, false, &bo); + if (ret) { + goto exit; + } + + ttm_bo = &bo->ttm_bo; + + ret = drm_gem_handle_create(file_priv, &ttm_bo->base, &handle); + drm_gem_object_put(&ttm_bo->base); + if (ret) { + via_bo_destroy(bo, false); + goto exit; + } + + args->handle = handle; + args->pitch = pitch; + args->size = size; +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static int via_driver_dumb_map_offset(struct drm_file *file_priv, + struct drm_device *dev, + uint32_t handle, + uint64_t *offset) +{ + struct drm_gem_object *gem; + struct ttm_buffer_object *ttm_bo; + struct via_bo *bo; + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + gem = drm_gem_object_lookup(file_priv, handle); + if (!gem) { + ret = -ENOENT; + goto exit; + } + + ttm_bo = container_of(gem, struct ttm_buffer_object, base); + bo = to_ttm_bo(ttm_bo); + *offset = drm_vma_node_offset_addr(&ttm_bo->base.vma_node); + + drm_gem_object_put(gem); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static const struct file_operations via_driver_fops = { + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .unlocked_ioctl = drm_ioctl, + .mmap = drm_gem_mmap, + .poll = drm_poll, + .llseek = noop_llseek, +}; + +static struct drm_driver via_driver = { + .driver_features = DRIVER_GEM | + DRIVER_MODESET | + DRIVER_ATOMIC, + .open = via_driver_open, + .postclose = via_driver_postclose, + .lastclose = via_driver_lastclose, + .gem_prime_mmap = drm_gem_prime_mmap, + .dumb_create = via_driver_dumb_create, + .dumb_map_offset = via_driver_dumb_map_offset, + .ioctls = via_driver_ioctls, + .fops = &via_driver_fops, + .name = DRIVER_NAME, + .desc = DRIVER_DESC, + .date = DRIVER_DATE, + .major = DRIVER_MAJOR, + .minor = DRIVER_MINOR, + .patchlevel = DRIVER_PATCHLEVEL, +}; + +static struct pci_device_id via_pci_table[] = { + viadrv_PCI_IDS, +}; + +MODULE_DEVICE_TABLE(pci, via_pci_table); + +static int via_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct drm_device *dev; + struct via_drm_priv *dev_priv; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, + &via_driver); + if (ret) { + goto exit; + } + + ret = pci_enable_device(pdev); + if (ret) { + goto exit; + } + + dev_priv = devm_drm_dev_alloc(&pdev->dev, + &via_driver, + struct via_drm_priv, + dev); + if (IS_ERR(dev_priv)) { + ret = PTR_ERR(dev_priv); + goto exit; + } + + dev = &dev_priv->dev; + + pci_set_drvdata(pdev, dev); + + ret = via_drm_init(dev); + if (ret) { + goto error_disable_pci; + } + + ret = drm_dev_register(dev, ent->driver_data); + if (ret) { + goto error_disable_pci; + } + + drm_fbdev_generic_setup(dev, 32); + goto exit; +error_disable_pci: + pci_disable_device(pdev); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static void via_pci_remove(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + via_drm_fini(dev); + drm_dev_unregister(dev); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static const struct dev_pm_ops via_dev_pm_ops = { + .suspend = via_dev_pm_ops_suspend, + .resume = via_dev_pm_ops_resume, +}; + +static struct pci_driver via_pci_driver = { + .name = DRIVER_NAME, + .id_table = via_pci_table, + .probe = via_pci_probe, + .remove = via_pci_remove, + .driver.pm = &via_dev_pm_ops, +}; + +static int __init via_init(void) +{ + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if ((via_modeset == -1) && + (drm_firmware_drivers_only())) { + via_modeset = 0; + } + + if (!via_modeset) { + ret = -EINVAL; + goto exit; + } + + via_driver.num_ioctls = via_driver_num_ioctls; + + ret = pci_register_driver(&via_pci_driver); + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static void __exit via_exit(void) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (!via_modeset) { + goto exit; + } + + pci_unregister_driver(&via_pci_driver); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +module_init(via_init); +module_exit(via_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [PATCH 11/28] drm/via: Add via_drv.c 2022-06-24 20:26 ` [PATCH 11/28] drm/via: Add via_drv.c Kevin Brace @ 2022-06-25 7:15 ` Sam Ravnborg 0 siblings, 0 replies; 34+ messages in thread From: Sam Ravnborg @ 2022-06-25 7:15 UTC (permalink / raw) To: Kevin Brace; +Cc: Kevin Brace, dri-devel Hi Kevin, a few nitpicks in the following. Sam On Fri, Jun 24, 2022 at 03:26:16PM -0500, Kevin Brace wrote: > From: Kevin Brace <kevinbrace@bracecomputerlab.com> > > Note that GPL is chosen as a license type. This is due to via_i2c.c > being GPL based. Everything else is MIT license based. It would be nice to have a re-written version of i2c so everything could be MIT. > > Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> > --- > drivers/gpu/drm/via/via_drv.c | 313 ++++++++++++++++++++++++++++++++++ > 1 file changed, 313 insertions(+) > create mode 100644 drivers/gpu/drm/via/via_drv.c > > diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c > new file mode 100644 > index 000000000000..25d7967c938b > --- /dev/null > +++ b/drivers/gpu/drm/via/via_drv.c > @@ -0,0 +1,313 @@ > +/* > + * Copyright © 2019-2021 Kevin Brace. > + * Copyright 2012 James Simmons. All Rights Reserved. > + * > + * Permission is hereby granted, free of charge, to any person obtaining a > + * copy of this software and associated documentation files (the "Software"), > + * to deal in the Software without restriction, including without limitation > + * the rights to use, copy, modify, merge, publish, distribute, sub license, > + * and/or sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following conditions: > + * > + * The above copyright notice and this permission notice (including the > + * next paragraph) shall be included in all copies or substantial portions > + * of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL > + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR > + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, > + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER > + * DEALINGS IN THE SOFTWARE. Can you use the SPDX: // SPDX-License-Identifier: GPL-2.0 OR MIT > + * > + * Author(s): > + * Kevin Brace <kevinbrace@bracecomputerlab.com> > + * James Simmons <jsimmons@infradead.org> > + */ > + > +#include <linux/pci.h> > + > +#include <drm/drm_aperture.h> > +#include <drm/drm_drv.h> > +#include <drm/drm_fb_helper.h> > +#include <drm/drm_file.h> > +#include <drm/drm_gem.h> > +#include <drm/drm_ioctl.h> > +#include <drm/drm_pciids.h> > +#include <drm/drm_prime.h> > + > +#include <drm/ttm/ttm_bo_api.h> > + > +#include "via_drv.h" > + > + > +extern const struct drm_ioctl_desc via_driver_ioctls[]; > + > +/* > + * For now, this device driver will be disabled, unless the > + * user decides to enable it. > + */ > +int via_modeset = 0; > + > +MODULE_PARM_DESC(modeset, "Enable DRM device driver " > + "(Default: Disabled, " > + "0 = Disabled," > + "1 = Enabled)"); > +module_param_named(modeset, via_modeset, int, 0400); > + > +static int via_driver_open(struct drm_device *dev, > + struct drm_file *file_priv) > +{ > + int ret = 0; > + > + DRM_DEBUG_KMS("Entered %s.\n", __func__); > + > + DRM_DEBUG_KMS("Exiting %s.\n", __func__); > + return ret; > +} > + > +static void via_driver_postclose(struct drm_device *dev, > + struct drm_file *file_priv) > +{ > + DRM_DEBUG_KMS("Entered %s.\n", __func__); > + > + DRM_DEBUG_KMS("Exiting %s.\n", __func__); > +} > + > +static void via_driver_lastclose(struct drm_device *dev) > +{ > + DRM_DEBUG_KMS("Entered %s.\n", __func__); > + > + drm_fb_helper_lastclose(dev); > + > + DRM_DEBUG_KMS("Exiting %s.\n", __func__); > +} The above three functions should be dropped as they are not needed. > + > +static int via_driver_dumb_create(struct drm_file *file_priv, > + struct drm_device *dev, > + struct drm_mode_create_dumb *args) > +{ > + struct ttm_buffer_object *ttm_bo; > + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); > + struct via_bo *bo; > + uint32_t handle, pitch; > + uint64_t size; > + int ret; > + > + DRM_DEBUG_KMS("Entered %s.\n", __func__); > + > + /* > + * Calculate the parameters for the dumb buffer. > + */ > + pitch = args->width * ((args->bpp + 7) >> 3); > + size = pitch * args->height; > + > + ret = via_bo_create(dev, &dev_priv->bdev, size, > + ttm_bo_type_device, TTM_PL_VRAM, false, &bo); > + if (ret) { > + goto exit; > + } > + > + ttm_bo = &bo->ttm_bo; > + > + ret = drm_gem_handle_create(file_priv, &ttm_bo->base, &handle); > + drm_gem_object_put(&ttm_bo->base); > + if (ret) { > + via_bo_destroy(bo, false); > + goto exit; > + } > + > + args->handle = handle; > + args->pitch = pitch; > + args->size = size; > +exit: > + DRM_DEBUG_KMS("Exiting %s.\n", __func__); > + return ret; > +} > + > +static int via_driver_dumb_map_offset(struct drm_file *file_priv, > + struct drm_device *dev, > + uint32_t handle, > + uint64_t *offset) > +{ > + struct drm_gem_object *gem; > + struct ttm_buffer_object *ttm_bo; > + struct via_bo *bo; > + int ret = 0; > + > + DRM_DEBUG_KMS("Entered %s.\n", __func__); > + > + gem = drm_gem_object_lookup(file_priv, handle); > + if (!gem) { > + ret = -ENOENT; > + goto exit; > + } > + > + ttm_bo = container_of(gem, struct ttm_buffer_object, base); > + bo = to_ttm_bo(ttm_bo); > + *offset = drm_vma_node_offset_addr(&ttm_bo->base.vma_node); > + > + drm_gem_object_put(gem); > +exit: > + DRM_DEBUG_KMS("Exiting %s.\n", __func__); > + return ret; > +} > + > +static const struct file_operations via_driver_fops = { > + .owner = THIS_MODULE, > + .open = drm_open, > + .release = drm_release, > + .unlocked_ioctl = drm_ioctl, > + .mmap = drm_gem_mmap, > + .poll = drm_poll, > + .llseek = noop_llseek, > +}; There is a few macros that can be used here - like DEFINE_DRM_GEM_CMA_FOPS Maybe this fits. What I cannot grasp is the memory handling in the driver. There is a lot of helpers around for gem, shm, tmm etc. and I wonder how much of the helpers in drm apply to this driver. This is obviously a question for the audience and not to Kevin. > + > +static struct drm_driver via_driver = { > + .driver_features = DRIVER_GEM | > + DRIVER_MODESET | > + DRIVER_ATOMIC, > + .open = via_driver_open, > + .postclose = via_driver_postclose, > + .lastclose = via_driver_lastclose, > + .gem_prime_mmap = drm_gem_prime_mmap, > + .dumb_create = via_driver_dumb_create, > + .dumb_map_offset = via_driver_dumb_map_offset, > + .ioctls = via_driver_ioctls, > + .fops = &via_driver_fops, > + .name = DRIVER_NAME, > + .desc = DRIVER_DESC, > + .date = DRIVER_DATE, > + .major = DRIVER_MAJOR, > + .minor = DRIVER_MINOR, > + .patchlevel = DRIVER_PATCHLEVEL, > +}; > + > +static struct pci_device_id via_pci_table[] = { > + viadrv_PCI_IDS, > +}; > + > +MODULE_DEVICE_TABLE(pci, via_pci_table); > + > +static int via_pci_probe(struct pci_dev *pdev, > + const struct pci_device_id *ent) > +{ > + struct drm_device *dev; > + struct via_drm_priv *dev_priv; > + int ret; > + > + DRM_DEBUG_KMS("Entered %s.\n", __func__); > + > + ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, > + &via_driver); > + if (ret) { > + goto exit; > + } > + > + ret = pci_enable_device(pdev); > + if (ret) { > + goto exit; > + } > + > + dev_priv = devm_drm_dev_alloc(&pdev->dev, > + &via_driver, > + struct via_drm_priv, > + dev); > + if (IS_ERR(dev_priv)) { > + ret = PTR_ERR(dev_priv); > + goto exit; > + } > + > + dev = &dev_priv->dev; > + > + pci_set_drvdata(pdev, dev); > + > + ret = via_drm_init(dev); > + if (ret) { > + goto error_disable_pci; > + } > + > + ret = drm_dev_register(dev, ent->driver_data); > + if (ret) { > + goto error_disable_pci; > + } > + > + drm_fbdev_generic_setup(dev, 32); > + goto exit; > +error_disable_pci: > + pci_disable_device(pdev); > +exit: > + DRM_DEBUG_KMS("Exiting %s.\n", __func__); > + return ret; > +} > + > +static void via_pci_remove(struct pci_dev *pdev) > +{ > + struct drm_device *dev = pci_get_drvdata(pdev); > + > + DRM_DEBUG_KMS("Entered %s.\n", __func__); > + > + via_drm_fini(dev); > + drm_dev_unregister(dev); > + > + DRM_DEBUG_KMS("Exiting %s.\n", __func__); > +} > + Use DEFINE_SIMPLE_DEV_PM_OPS(.., ..) here. > +static const struct dev_pm_ops via_dev_pm_ops = { > + .suspend = via_dev_pm_ops_suspend, > + .resume = via_dev_pm_ops_resume, > +}; > + > +static struct pci_driver via_pci_driver = { > + .name = DRIVER_NAME, > + .id_table = via_pci_table, > + .probe = via_pci_probe, > + .remove = via_pci_remove, > + .driver.pm = &via_dev_pm_ops, > +}; > + > +static int __init via_init(void) > +{ > + int ret = 0; > + > + DRM_DEBUG_KMS("Entered %s.\n", __func__); > + > + if ((via_modeset == -1) && > + (drm_firmware_drivers_only())) { > + via_modeset = 0; > + } > + > + if (!via_modeset) { > + ret = -EINVAL; > + goto exit; > + } > + > + via_driver.num_ioctls = via_driver_num_ioctls; > + > + ret = pci_register_driver(&via_pci_driver); > + > +exit: > + DRM_DEBUG_KMS("Exiting %s.\n", __func__); > + return ret; > +} > + > +static void __exit via_exit(void) > +{ > + DRM_DEBUG_KMS("Entered %s.\n", __func__); > + > + if (!via_modeset) { > + goto exit; > + } > + > + pci_unregister_driver(&via_pci_driver); > +exit: > + DRM_DEBUG_KMS("Exiting %s.\n", __func__); > +} > + > +module_init(via_init); > +module_exit(via_exit); > + > +MODULE_AUTHOR(DRIVER_AUTHOR); > +MODULE_DESCRIPTION(DRIVER_DESC); > +MODULE_LICENSE("GPL"); > -- > 2.35.1 ^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH 12/28] drm/via: Add via_encoder.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (10 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 11/28] drm/via: Add via_drv.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 13/28] drm/via: Add via_hdmi.c Kevin Brace ` (8 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_encoder.c | 173 ++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) create mode 100644 drivers/gpu/drm/via/via_encoder.c diff --git a/drivers/gpu/drm/via/via_encoder.c b/drivers/gpu/drm/via/via_encoder.c new file mode 100644 index 000000000000..eae693fc5141 --- /dev/null +++ b/drivers/gpu/drm/via/via_encoder.c @@ -0,0 +1,173 @@ +/* + * Copyright © 2017-2018 Kevin Brace. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * Kevin Brace <kevinbrace@bracecomputerlab.com> + */ + +#include <linux/pci.h> +#include <linux/pci_ids.h> + +#include "via_drv.h" + + +void via_transmitter_io_pad_state(struct via_drm_priv *dev_priv, + uint32_t di_port, + bool io_pad_on) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch(di_port) { + case VIA_DI_PORT_DVP0: + via_dvp0_set_io_pad_state(VGABASE, + io_pad_on ? 0x03 : 0x00); + break; + case VIA_DI_PORT_DVP1: + via_dvp1_set_io_pad_state(VGABASE, + io_pad_on ? 0x03 : 0x00); + break; + case VIA_DI_PORT_FPDPLOW: + via_fpdp_low_set_io_pad_state(VGABASE, + io_pad_on ? 0x03 : 0x00); + break; + case VIA_DI_PORT_FPDPHIGH: + via_fpdp_high_set_io_pad_state(VGABASE, + io_pad_on ? 0x03 : 0x00); + break; + case (VIA_DI_PORT_FPDPLOW | + VIA_DI_PORT_FPDPHIGH): + via_fpdp_low_set_io_pad_state(VGABASE, + io_pad_on ? 0x03 : 0x00); + via_fpdp_high_set_io_pad_state(VGABASE, + io_pad_on ? 0x03 : 0x00); + break; + case VIA_DI_PORT_LVDS1: + via_lvds1_set_io_pad_setting(VGABASE, + io_pad_on ? 0x03 : 0x00); + break; + case VIA_DI_PORT_LVDS2: + via_lvds2_set_io_pad_setting(VGABASE, + io_pad_on ? 0x03 : 0x00); + break; + case (VIA_DI_PORT_LVDS1 | + VIA_DI_PORT_LVDS2): + via_lvds1_set_io_pad_setting(VGABASE, + io_pad_on ? 0x03 : 0x00); + via_lvds2_set_io_pad_setting(VGABASE, + io_pad_on ? 0x03 : 0x00); + break; + default: + break; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +void via_transmitter_clock_drive_strength( + struct via_drm_priv *dev_priv, + u32 di_port, u8 drive_strength) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch(di_port) { + case VIA_DI_PORT_DVP0: + via_dvp0_set_clock_drive_strength(VGABASE, + drive_strength); + break; + case VIA_DI_PORT_DVP1: + via_dvp1_set_clock_drive_strength(VGABASE, + drive_strength); + break; + default: + break; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +void via_transmitter_data_drive_strength( + struct via_drm_priv *dev_priv, + u32 di_port, u8 drive_strength) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch(di_port) { + case VIA_DI_PORT_DVP0: + via_dvp0_set_data_drive_strength(VGABASE, + drive_strength); + break; + case VIA_DI_PORT_DVP1: + via_dvp1_set_data_drive_strength(VGABASE, + drive_strength); + break; + default: + break; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +void via_transmitter_display_source(struct via_drm_priv *dev_priv, + u32 di_port, int index) +{ + u8 display_source = index & 0x01; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch(di_port) { + case VIA_DI_PORT_DVP0: + via_dvp0_set_display_source(VGABASE, display_source); + break; + case VIA_DI_PORT_DVP1: + via_dvp1_set_display_source(VGABASE, display_source); + break; + case VIA_DI_PORT_FPDPLOW: + via_fpdp_low_set_display_source(VGABASE, display_source); + via_dvp1_set_display_source(VGABASE, display_source); + break; + case VIA_DI_PORT_FPDPHIGH: + via_fpdp_high_set_display_source(VGABASE, display_source); + via_dvp0_set_display_source(VGABASE, display_source); + break; + case (VIA_DI_PORT_FPDPLOW | + VIA_DI_PORT_FPDPHIGH): + via_fpdp_low_set_display_source(VGABASE, display_source); + via_fpdp_high_set_display_source(VGABASE, display_source); + break; + case VIA_DI_PORT_LVDS1: + via_lvds1_set_display_source(VGABASE, display_source); + break; + case VIA_DI_PORT_LVDS2: + via_lvds2_set_display_source(VGABASE, display_source); + break; + case (VIA_DI_PORT_LVDS1 | + VIA_DI_PORT_LVDS2): + via_lvds1_set_display_source(VGABASE, display_source); + via_lvds2_set_display_source(VGABASE, display_source); + break; + default: + break; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 13/28] drm/via: Add via_hdmi.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (11 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 12/28] drm/via: Add via_encoder.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 14/28] drm/via: Add via_i2c.c Kevin Brace ` (7 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_hdmi.c | 719 +++++++++++++++++++++++++++++++++ 1 file changed, 719 insertions(+) create mode 100644 drivers/gpu/drm/via/via_hdmi.c diff --git a/drivers/gpu/drm/via/via_hdmi.c b/drivers/gpu/drm/via/via_hdmi.c new file mode 100644 index 000000000000..9412054a24df --- /dev/null +++ b/drivers/gpu/drm/via/via_hdmi.c @@ -0,0 +1,719 @@ +/* + * Copyright 2013 James Simmons. All Rights Reserved. + * Copyright 1998-2012 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2012 S3 Graphics, Inc. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * James Simmons <jsimmons@infradead.org> + */ + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_print.h> +#include <drm/drm_probe_helper.h> + +#include "via_drv.h" + + +#define HDMI_AUDIO_ENABLED BIT(0) + +int via_hdmi_audio = 0; + +MODULE_PARM_DESC(audio, "HDMI Audio enable (1 = enable)"); +module_param_named(audio, via_hdmi_audio, int, 0444); + +/* + * Routines for controlling stuff on the HDMI port + */ +static const struct drm_encoder_funcs via_hdmi_enc_funcs = { + .destroy = via_encoder_cleanup, +}; + +static void via_hdmi_enc_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + switch (mode) { + case DRM_MODE_DPMS_SUSPEND: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_OFF: + /* disable HDMI */ + VIA_WRITE_MASK(0xC280, 0x0, 0x2); + break; + + case DRM_MODE_DPMS_ON: + default: + /* enable band gap */ + VIA_WRITE_MASK(0xC740, BIT(0), BIT(0)); + /* enable video */ + VIA_WRITE_MASK(0xC640, BIT(3), BIT(3)); + /* enable HDMI */ + VIA_WRITE_MASK(0xC280, BIT(1), BIT(1)); + break; + } +} + +static bool via_hdmi_enc_mode_fixup(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + uint32_t panelHSyncTime = 0, panelHBlankStart = 0, newHBlankStart = 0; + uint32_t panelVSyncTime = 0, panelVBlankStart = 0, newVBlankStart = 0; + uint32_t left_border = 0, right_border = 0; + uint32_t top_border = 0, bottom_border = 0; + + if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { + /* when interlace mode, we should consider halve vertical + * timings. */ + panelHSyncTime = adjusted_mode->hsync_end - + adjusted_mode->hsync_start; + panelVSyncTime = adjusted_mode->vsync_end / 2 - + adjusted_mode->vsync_start / 2; + panelHBlankStart = adjusted_mode->hdisplay; + panelVBlankStart = adjusted_mode->vdisplay / 2; + newHBlankStart = adjusted_mode->hdisplay - left_border; + newVBlankStart = adjusted_mode->vdisplay / 2 - top_border; + + adjusted_mode->hdisplay = + adjusted_mode->hdisplay - left_border - right_border; + adjusted_mode->hsync_start = + (adjusted_mode->hsync_start - panelHBlankStart) + + newHBlankStart; + adjusted_mode->hsync_end = + adjusted_mode->hsync_start + panelHSyncTime; + + adjusted_mode->vdisplay = adjusted_mode->vdisplay / 2 - + top_border - bottom_border; + adjusted_mode->vsync_start = + (adjusted_mode->vsync_start / 2 - panelVBlankStart) + + newVBlankStart; + adjusted_mode->vsync_end = + adjusted_mode->vsync_start + panelVSyncTime; + } else { + panelHSyncTime = + adjusted_mode->hsync_end - adjusted_mode->hsync_start; + panelVSyncTime = + adjusted_mode->vsync_end - adjusted_mode->vsync_start; + panelHBlankStart = adjusted_mode->hdisplay; + panelVBlankStart = adjusted_mode->vdisplay; + newHBlankStart = adjusted_mode->hdisplay - left_border; + newVBlankStart = adjusted_mode->vdisplay - top_border; + + adjusted_mode->hdisplay = + adjusted_mode->hdisplay - left_border - right_border; + adjusted_mode->hsync_start = + (adjusted_mode->hsync_start - panelHBlankStart) + + newHBlankStart; + adjusted_mode->hsync_end = + adjusted_mode->hsync_start + panelHSyncTime; + + adjusted_mode->vdisplay = + adjusted_mode->vdisplay - top_border - bottom_border; + adjusted_mode->vsync_start = + (adjusted_mode->vsync_start - panelVBlankStart) + + newVBlankStart; + adjusted_mode->vsync_end = + adjusted_mode->vsync_start + panelVSyncTime; + } + + /* Adjust crtc H and V */ + adjusted_mode->crtc_hdisplay = adjusted_mode->hdisplay; + adjusted_mode->crtc_hblank_start = newHBlankStart; + adjusted_mode->crtc_hblank_end = + adjusted_mode->crtc_htotal - left_border; + adjusted_mode->crtc_hsync_start = adjusted_mode->hsync_start; + adjusted_mode->crtc_hsync_end = adjusted_mode->hsync_end; + + adjusted_mode->crtc_vdisplay = adjusted_mode->vdisplay; + adjusted_mode->crtc_vblank_start = newVBlankStart; + adjusted_mode->crtc_vblank_end = + adjusted_mode->crtc_vtotal - top_border; + adjusted_mode->crtc_vsync_start = adjusted_mode->vsync_start; + adjusted_mode->crtc_vsync_end = adjusted_mode->vsync_end; + + drm_mode_set_crtcinfo(adjusted_mode, 0); + return true; +} + +static void via_hdmi_native_mode_set(struct via_crtc *iga, + struct drm_display_mode *mode, + bool audio_off) +{ + struct drm_device *dev = iga->base.dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + u32 reg_c280, reg_c284; + int max_packet, delay; + u8 value = BIT(0); + + /* 135MHz ~ 270MHz */ + if (mode->clock >= 135000) + VIA_WRITE_MASK(DP_EPHY_PLL_REG, 0x00000000, 0xC0000000); + /* 67.5MHz ~ <135MHz */ + else if (mode->clock >= 67500) + VIA_WRITE_MASK(DP_EPHY_PLL_REG, 0x40000000, 0xC0000000); + /* 33.75MHz ~ <67.5MHz */ + else if (mode->clock >= 33750) + VIA_WRITE_MASK(DP_EPHY_PLL_REG, 0x80000000, 0xC0000000); + /* 25MHz ~ <33.75MHz */ + else + VIA_WRITE_MASK(DP_EPHY_PLL_REG, 0xC0000000, 0xC0000000); + + /* touch C282 when init HDMI by mode 720x576, 720x480, + * or other modes */ + if ((mode->hdisplay == 720) && (mode->vdisplay == 576)) + VIA_WRITE(0xC280, 0x18232402); + else if ((mode->hdisplay == 720) && (mode->vdisplay == 480)) + VIA_WRITE(0xC280, 0x181f2402); + else + VIA_WRITE(0xC280, 0x18330002); + + /* init C280 */ + reg_c280 = 0x18000002 | (VIA_READ(0xC280) & 0x40); + /* sync polarity */ + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + reg_c280 |= BIT(10); + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + reg_c280 |= BIT(13); + + /* calculate correct delay of regC280[22:16] */ + if ((mode->crtc_hsync_start - mode->crtc_hdisplay) > (58 - 11)) + delay = 0; + else + delay = 58 - (mode->crtc_hsync_start - mode->crtc_hdisplay) - 11; + + /* calculate max_packet */ + max_packet = (mode->crtc_hblank_end - mode->crtc_hsync_start - 16 - 11 - delay) / 32; + if (0 == delay) + delay = mode->crtc_hblank_end - mode->crtc_hsync_start - (32 * max_packet + 16 + 11); + + reg_c280 |= (delay << 16); + VIA_WRITE(0xC280, reg_c280); + reg_c284 = 0x00000102 | (max_packet << 28); + + /* power down to reset */ + VIA_WRITE_MASK(0xC740, 0x00000000, 0x06000000); + /* enable DP data pass */ + VIA_WRITE_MASK(DP_DATA_PASS_ENABLE_REG, 0x00000001, 0x00000001); + /* select HDMI mode */ + VIA_WRITE_MASK(0xC748, 0, BIT(0)); + /* enable HDMI with HDMI mode */ + VIA_WRITE_MASK(0xC280, 0x00, 0x40); + /* select AC mode */ + VIA_WRITE_MASK(0xC74C, 0x40, 0x40); + /* enable InfoFrame */ + VIA_WRITE(0xC284, reg_c284); + /* set status of Lane0~3 */ + VIA_WRITE_MASK(0xC744, 0x00FFFF82, 0x00FFFF82); + VIA_WRITE(0xC0B4, 0x92000000); + /* enable audio packet */ + if (!audio_off) + VIA_WRITE_MASK(0xC294, 0x10000000, 0x10000000); + /* enable InfoFrame */ + VIA_WRITE(0xC284, reg_c284); + VIA_WRITE_MASK(0xC740, 0x1E4CBE7F, 0x3FFFFFFF); + VIA_WRITE_MASK(0xC748, 0x84509180, 0x001FFFFF); + /* Select PHY Function as HDMI */ + /* Select HDTV0 source */ + if (iga->index) + value |= BIT(1); + svga_wcrt_mask(VGABASE, 0xFF, value, BIT(1) | BIT(0)); +} + +static void via_hdmi_enc_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct via_encoder *enc = container_of(encoder, struct via_encoder, base); + struct via_crtc *iga = container_of(encoder->crtc, struct via_crtc, base); + struct drm_connector *connector = NULL, *con; + struct drm_device *dev = encoder->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + list_for_each_entry(con, &dev->mode_config.connector_list, head) { + if (encoder == con->encoder) { + connector = con; + break; + } + } + + if (!connector) { + DRM_INFO("HDMI encoder is not used by any connector\n"); + return; + } + + if (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA) { + struct via_connector *con = container_of(connector, struct via_connector, base); + bool audio_off = (con->flags & HDMI_AUDIO_ENABLED); + + if (enc->di_port == VIA_DI_PORT_NONE) + via_hdmi_native_mode_set(iga, adjusted_mode, audio_off); + + if (!iga->index) + via_load_crtc_pixel_timing(encoder->crtc, adjusted_mode); + + /* Set Hsync Offset, delay one clock (To meet 861-D spec.) */ + svga_wcrt_mask(VGABASE, 0x8A, 0x01, 0x7); + + /* If CR8A +1, HSyc must -1 */ + vga_wcrt(VGABASE, 0x56, vga_rcrt(VGABASE, 0x56) - 1); + vga_wcrt(VGABASE, 0x57, vga_rcrt(VGABASE, 0x57) - 1); + + if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { + if (iga->index) { + /* FIXME VIA where do you get this value from ??? */ + u32 v_sync_adjust = 0; + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_VX875: + svga_wcrt_mask(VGABASE, 0xFB, + v_sync_adjust & 0xFF, 0xFF); + svga_wcrt_mask(VGABASE, 0xFC, + (v_sync_adjust & 0x700) >> 8, 0x07); + break; + + case PCI_DEVICE_ID_VIA_VX900_VGA: + svga_wcrt_mask(VGABASE, 0xAB, v_sync_adjust & 0xFF, 0xFF); + svga_wcrt_mask(VGABASE, 0xAC, (v_sync_adjust & 0x700) >> 8, 0x07); + break; + + default: + svga_wcrt_mask(VGABASE, 0xFB, v_sync_adjust & 0xFF, 0xFF); + svga_wcrt_mask(VGABASE, 0xFC, (v_sync_adjust & 0x700) >> 8, 0x07); + break; + } + } + } else { /* non-interlace, clear interlace setting. */ + if (iga->index) { + vga_wcrt(VGABASE, 0xFB, 0); + svga_wcrt_mask(VGABASE, 0xFC, 0, 0x07); + } + } + } else if (connector->connector_type == DRM_MODE_CONNECTOR_DVID) { + /* 135MHz ~ 270MHz */ + if (mode->clock >= 135000) + VIA_WRITE_MASK(DP_EPHY_PLL_REG, 0x00000000, 0xC0000000); + /* 67.5MHz ~ < 135MHz */ + else if (mode->clock >= 67500) + VIA_WRITE_MASK(DP_EPHY_PLL_REG, 0x40000000, 0xC0000000); + /* 33.75MHz ~ < 67.5MHz */ + else if (mode->clock >= 33750) + VIA_WRITE_MASK(DP_EPHY_PLL_REG, 0x80000000, 0xC0000000); + /* 25MHz ~ < 33.75MHz */ + else + VIA_WRITE_MASK(DP_EPHY_PLL_REG, 0xC0000000, 0xC0000000); + + /* Power down TPLL to reset */ + VIA_WRITE_MASK(DP_EPHY_PLL_REG, 0x00000000, 0x06000000); + /* Enable DP data pass */ + VIA_WRITE_MASK(DP_DATA_PASS_ENABLE_REG, 0x00000001, 0x00000001); + /* Select EPHY as HDMI mode */ + VIA_WRITE_MASK(DP_EPHY_MISC_PWR_REG, 0, BIT(0)); + /* Enable HDMI with DVI mode */ + VIA_WRITE_MASK(0xC280, 0x40, 0x40); + /* select AC mode */ + VIA_WRITE_MASK(0xC74C, 0x40, 0x40); + /* Set status of Lane0~3 */ + VIA_WRITE_MASK(0xC744, 0x00FFFF00, 0x00FFFF00); + /* Disable InfoFrame */ + VIA_WRITE_MASK(0xC284, 0x00000000, 0x00000002); + /* EPHY Control Register */ + VIA_WRITE_MASK(DP_EPHY_PLL_REG, 0x1EC46E6F, 0x3FFFFFFF); + /* Select PHY Function as HDMI */ + svga_wcrt_mask(VGABASE, 0xFF, BIT(0), BIT(0)); + /* Select HDTV0 source */ + if (!iga->index) + svga_wcrt_mask(VGABASE, 0xFF, 0, BIT(1)); + else + svga_wcrt_mask(VGABASE, 0xFF, BIT(1), BIT(1)); + + /* in 640x480 case, MPLL is different */ + /* For VT3410 internal transmitter 640x480 issue */ + if (mode->hdisplay == 640 && mode->vdisplay == 480) { + VIA_WRITE(DP_EPHY_PLL_REG, 0xD8C29E6F); + VIA_WRITE(DP_EPHY_PLL_REG, 0xDEC29E6F); + } + } + + /* Patch for clock skew */ + if (enc->di_port == VIA_DI_PORT_DVP1) { + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_VT3157: /* CX700 */ + svga_wcrt_mask(VGABASE, 0x65, 0x0B, 0x0F); + svga_wcrt_mask(VGABASE, 0x9B, 0x00, 0x0F); + break; + + case PCI_DEVICE_ID_VIA_VT1122: /* VX800 */ + case PCI_DEVICE_ID_VIA_VX875: /* VX855 */ + svga_wcrt_mask(VGABASE, 0x65, 0x0B, 0x0F); + svga_wcrt_mask(VGABASE, 0x9B, 0x0F, 0x0F); + break; + + case PCI_DEVICE_ID_VIA_VX900_VGA: /* VX900 */ + svga_wcrt_mask(VGABASE, 0x65, 0x09, 0x0F); + svga_wcrt_mask(VGABASE, 0x9B, 0x09, 0x0F); + break; + + default: + break; + } + } +} + +static const struct drm_encoder_helper_funcs via_hdmi_enc_helper_funcs = { + .dpms = via_hdmi_enc_dpms, + .mode_fixup = via_hdmi_enc_mode_fixup, + .mode_set = via_hdmi_enc_mode_set, +}; + +static unsigned int via_check_hdmi_i2c_status(struct via_drm_priv *dev_priv, + unsigned int check_bits, + unsigned int condition) +{ + unsigned int status = true, max = 50, loop = 0; + + if (condition) { + while ((VIA_READ(0xC0B8) & check_bits) && loop < max) { + /* delay 20 us */ + udelay(20); + + if (++loop == max) + status = false; + } + } else { + while (!(VIA_READ(0xC0B8) & check_bits) && loop < max) { + /* delay 20 us */ + udelay(20); + + if (++loop == max) + status = false; + } + } + return status; +} + +unsigned int via_ddc_read_bytes_by_hdmi(struct via_drm_priv *dev_priv, + unsigned int offset, + unsigned char *block) +{ + unsigned int status = true, temp = 0, i; + + /* Enable DDC */ + VIA_WRITE_MASK(0xC000, 0x00000001, 0x00000001); + VIA_WRITE(0xC0C4, (VIA_READ(0xC0C4) & 0xFC7FFFFF) | 0x00800000); + VIA_WRITE(0xC0B8, 0x00000001); + + /* START */ + VIA_WRITE(0xC0B8, 0x0011); + VIA_WRITE(0xC0B8, 0x0019); + if (status) + status = via_check_hdmi_i2c_status(dev_priv, 0x0018, true); + + /* Slave Address */ + temp = 0xA0; + temp <<= 16; + temp |= VIA_READ(0xC0B4) & 0xFF00FFFF; + VIA_WRITE(0xC0B4, temp); + VIA_WRITE(0xC0B8, 0x0009); + if (status) + status = via_check_hdmi_i2c_status(dev_priv, 0x0008, true); + + /* Offset */ + temp = offset; + temp <<= 16; + temp |= VIA_READ(0xC0B4) & 0xFF00FFFF; + VIA_WRITE(0xC0B4, temp); + VIA_WRITE(0xC0B8, 0x0009); + if (status) + status = via_check_hdmi_i2c_status(dev_priv, 0x0008, true); + + /* START */ + VIA_WRITE(0xC0B8, 0x0011); + VIA_WRITE(0xC0B8, 0x0019); + if (status) + status = via_check_hdmi_i2c_status(dev_priv, 0x0018, true); + + /* Slave Address + 1 */ + temp = 0xA1; + temp <<= 16; + temp |= VIA_READ(0xC0B4) & 0xFF00FFFF; + VIA_WRITE(0xC0B4, temp); + VIA_WRITE(0xC0B8, 0x0009); + if (status) + status = via_check_hdmi_i2c_status(dev_priv, 0x0008, true); + + for (i = 0; i < EDID_LENGTH; i++) { + /* Read Data */ + VIA_WRITE(0xC0B8, 0x0009); + via_check_hdmi_i2c_status(dev_priv, 0x0008, true); + via_check_hdmi_i2c_status(dev_priv, 0x0080, false); + *block++ = (unsigned char) ((VIA_READ(0xC0B4) & 0x0000FF00) >> 8); + VIA_WRITE(0xC0B8, (VIA_READ(0xC0B8) & ~0x80)); + } + + /* STOP */ + VIA_WRITE(0xC0B8, 0x0021); + VIA_WRITE(0xC0B8, 0x0029); + + status = via_check_hdmi_i2c_status(dev_priv, 0x0828, true); + if (!status) { + /* Reset */ + VIA_WRITE_MASK(0xC0C4, 0x00000080, 0x00000080); + VIA_WRITE_MASK(0xC0C4, 0x00000000, 0x00000080); + } + return status; +} + +struct edid* via_hdmi_get_edid(struct drm_connector *connector) +{ + bool print_bad_edid = !connector->bad_edid_counter || (drm_debug_enabled(DRM_UT_KMS)); + struct drm_device *dev = connector->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct edid *edid = NULL; + int i, j = 0; + u8 *block; + + /* Clear out old EDID block */ + drm_connector_update_edid_property(connector, edid); + + block = kmalloc(EDID_LENGTH, GFP_KERNEL); + if (!block) + return edid; + + /* base block fetch */ + for (i = 0; i < 4; i++) { + if (!via_ddc_read_bytes_by_hdmi(dev_priv, 0, block)) + goto out; + + if (drm_edid_block_valid(block, 0, print_bad_edid, NULL)) + break; + + if (i == 0 && !memchr_inv(block, 0, EDID_LENGTH)) { + connector->null_edid_counter++; + goto carp; + } + } + if (i == 4) + goto carp; + + /* parse the extensions if present */ + if (block[0x7e]) { + u8 *new = krealloc(block, (block[0x7e] + 1) * EDID_LENGTH, GFP_KERNEL); + int valid_extensions = 0, offset = 0; + + if (!new) + goto out; + block = new; + + for (j = 1; j <= block[0x7e]; j++) { + for (i = 0; i < 4; i++) { + offset = (valid_extensions + 1) * EDID_LENGTH; + new = block + offset; + + if (!via_ddc_read_bytes_by_hdmi(dev_priv, + offset, new)) + goto out; + + if (drm_edid_block_valid(new, j, print_bad_edid, NULL)) { + valid_extensions++; + break; + } + } + + if (i == 4 && print_bad_edid) { + dev_warn(connector->dev->dev, + "%s: Ignoring invalid EDID block %d.\n", + connector->name, j); + + connector->bad_edid_counter++; + } + } + + if (valid_extensions != block[0x7e]) { + block[EDID_LENGTH - 1] += block[0x7e] - valid_extensions; + block[0x7e] = valid_extensions; + + new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL); + if (!new) + goto out; + block = new; + } + } + edid = (struct edid *) block; + drm_connector_update_edid_property(connector, edid); + return edid; + +carp: + if (print_bad_edid) { + dev_warn(connector->dev->dev, "%s: EDID block %d invalid.\n", + connector->name, j); + } + connector->bad_edid_counter++; +out: + kfree(block); + return edid; +} + +static enum drm_connector_status +via_hdmi_detect(struct drm_connector *connector, bool force) +{ + struct drm_device *dev = connector->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + enum drm_connector_status ret = connector_status_disconnected; + u32 mm_c730 = VIA_READ(0xc730) & 0xC0000000; + struct edid *edid = NULL; + + if (VIA_IRQ_DP_HOT_UNPLUG == mm_c730) { + drm_connector_update_edid_property(connector, NULL); + return ret; + } + + edid = via_hdmi_get_edid(connector); + if (edid) { + if ((connector->connector_type != DRM_MODE_CONNECTOR_HDMIA) ^ + (drm_detect_hdmi_monitor(edid))) + ret = connector_status_connected; + } + return ret; +} + +static int via_hdmi_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t value) +{ + struct drm_device *dev = connector->dev; + + if (property == dev->mode_config.dpms_property && connector->encoder) + via_hdmi_enc_dpms(connector->encoder, (uint32_t)(value & 0xf)); + return 0; +} + +static const struct drm_connector_funcs via_hdmi_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = via_hdmi_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .set_property = via_hdmi_set_property, + .destroy = via_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = + drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = + drm_atomic_helper_connector_destroy_state, +}; + +static int via_hdmi_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + return MODE_OK; +} + +int via_hdmi_get_modes(struct drm_connector *connector) +{ + struct edid *edid = via_hdmi_get_edid(connector); + + if (edid) { + struct via_connector *con; + + if (edid->input & DRM_EDID_INPUT_DIGITAL) { + con = container_of(connector, struct via_connector, base); + + if (via_hdmi_audio) + con->flags |= drm_detect_monitor_audio(edid); + } + } + return drm_add_edid_modes(connector, edid); +} + +static const struct drm_connector_helper_funcs via_hdmi_connector_helper_funcs = { + .mode_valid = via_hdmi_mode_valid, + .get_modes = via_hdmi_get_modes, +}; + +void via_hdmi_init(struct drm_device *dev, u32 di_port) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_connector *dvi, *hdmi; + struct via_encoder *enc; + + enc = kzalloc(sizeof(*enc) + 2 * sizeof(*hdmi), GFP_KERNEL); + if (!enc) { + DRM_ERROR("Failed to allocate connector and encoder\n"); + return; + } + hdmi = &enc->cons[0]; + dvi = &enc->cons[1]; + + /* Setup the encoders and attach them */ + drm_encoder_init(dev, &enc->base, &via_hdmi_enc_funcs, + DRM_MODE_ENCODER_TMDS, NULL); + drm_encoder_helper_add(&enc->base, &via_hdmi_enc_helper_funcs); + + enc->base.possible_crtcs = BIT(1) | BIT(0); + enc->base.possible_clones = 0; + enc->di_port = di_port; + + /* Setup the HDMI connector */ + drm_connector_init(dev, &hdmi->base, &via_hdmi_connector_funcs, + DRM_MODE_CONNECTOR_HDMIA); + drm_connector_helper_add(&hdmi->base, &via_hdmi_connector_helper_funcs); + drm_connector_register(&hdmi->base); + + hdmi->base.polled = DRM_CONNECTOR_POLL_HPD; + hdmi->base.doublescan_allowed = false; + INIT_LIST_HEAD(&hdmi->props); + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_VT3157: + case PCI_DEVICE_ID_VIA_VT1122: + hdmi->base.interlace_allowed = false; + break; + default: + hdmi->base.interlace_allowed = true; + break; + } + drm_connector_attach_encoder(&hdmi->base, &enc->base); + + /* Setup the DVI connector */ + drm_connector_init(dev, &dvi->base, &via_hdmi_connector_funcs, + DRM_MODE_CONNECTOR_DVID); + drm_connector_helper_add(&dvi->base, &via_hdmi_connector_helper_funcs); + drm_connector_register(&dvi->base); + + dvi->base.polled = DRM_CONNECTOR_POLL_HPD; + dvi->base.doublescan_allowed = false; + INIT_LIST_HEAD(&dvi->props); + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_VT3157: + case PCI_DEVICE_ID_VIA_VT3353: + dvi->base.interlace_allowed = false; + break; + default: + dvi->base.interlace_allowed = true; + break; + } + drm_connector_attach_encoder(&dvi->base, &enc->base); +} -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 14/28] drm/via: Add via_i2c.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (12 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 13/28] drm/via: Add via_hdmi.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 15/28] drm/via: Add via_init.c Kevin Brace ` (6 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Note that the code here is GPL based. Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_i2c.c | 209 ++++++++++++++++++++++++++++++++++ 1 file changed, 209 insertions(+) create mode 100644 drivers/gpu/drm/via/via_i2c.c diff --git a/drivers/gpu/drm/via/via_i2c.c b/drivers/gpu/drm/via/via_i2c.c new file mode 100644 index 000000000000..f2e8b118754e --- /dev/null +++ b/drivers/gpu/drm/via/via_i2c.c @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2012 James Simmons. All Rights Reserved. + * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. + * + * Author(s): + * James Simmons <jsimmons@infradead.org> + */ + +#include <linux/delay.h> + +#include "via_drv.h" + +enum viafb_i2c_adap; + +#include <linux/via_i2c.h> + +#define SERIAL 0 +#define GPIO 1 + +static struct via_i2c_stuff via_i2c_par[5]; + +static void via_i2c_setsda(void *data, int state) +{ + struct via_i2c_stuff *i2c = data; + struct drm_device *dev = i2c_get_adapdata(&i2c->adapter); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + u8 value, mask; + + if (i2c->is_active == GPIO) { + mask = state ? BIT(6) : BIT(6) | BIT(4); + value = state ? 0x00 : BIT(6); + } else { + value = state ? BIT(4) | BIT(0) : BIT(0); + mask = BIT(4) | BIT(0); + } + + svga_wseq_mask(VGABASE, i2c->i2c_port, value, mask); +} + +static void via_i2c_setscl(void *data, int state) +{ + struct via_i2c_stuff *i2c = data; + struct drm_device *dev = i2c_get_adapdata(&i2c->adapter); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + u8 value, mask; + + if (i2c->is_active == GPIO) { + mask = state ? BIT(7) : BIT(7) | BIT(5); + value = state ? 0x00 : BIT(7); + } else { + value = state ? BIT(5) | BIT(0) : BIT(0); + mask = BIT(5) | BIT(0); + } + + svga_wseq_mask(VGABASE, i2c->i2c_port, value, mask); +} + +static int via_i2c_getsda(void *data) +{ + struct via_i2c_stuff *i2c = data; + struct drm_device *dev = i2c_get_adapdata(&i2c->adapter); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + return vga_rseq(VGABASE, i2c->i2c_port) & BIT(2); +} + +static int via_i2c_getscl(void *data) +{ + struct via_i2c_stuff *i2c = data; + struct drm_device *dev = i2c_get_adapdata(&i2c->adapter); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + return vga_rseq(VGABASE, i2c->i2c_port) & BIT(3); +} + +struct i2c_adapter *via_find_ddc_bus(int port) +{ + struct i2c_adapter *adapter = NULL; + int i; + + for (i = 0; i < ARRAY_SIZE(via_i2c_par); i++) { + struct via_i2c_stuff *i2c = &via_i2c_par[i]; + + if (i2c->i2c_port == port) { + adapter = &i2c->adapter; + break; + } + } + return adapter; +} + +static int create_i2c_bus(struct drm_device *dev, + struct via_i2c_stuff *i2c_par) +{ + struct i2c_adapter *adapter = &i2c_par->adapter; + struct i2c_algo_bit_data *algo = &i2c_par->algo; + + algo->setsda = via_i2c_setsda; + algo->setscl = via_i2c_setscl; + algo->getsda = via_i2c_getsda; + algo->getscl = via_i2c_getscl; + algo->udelay = 15; + algo->timeout = usecs_to_jiffies(2200); /* from VESA */ + algo->data = i2c_par; + + sprintf(adapter->name, "via i2c bit bus 0x%02x", i2c_par->i2c_port); + adapter->owner = THIS_MODULE; + adapter->class = I2C_CLASS_DDC; + adapter->algo_data = algo; + i2c_set_adapdata(adapter, dev); + + /* Raise SCL and SDA */ + via_i2c_setsda(i2c_par, 1); + via_i2c_setscl(i2c_par, 1); + udelay(20); + + return i2c_bit_add_bus(adapter); +} + +void via_i2c_readbytes(struct i2c_adapter *adapter, + u8 slave_addr, char offset, + u8 *buffer, unsigned int size) +{ + u8 out_buf[2]; + u8 in_buf[2]; + struct i2c_msg msgs[] = { + { + .addr = slave_addr, + .flags = 0, + .len = 1, + .buf = out_buf, + }, + { + .addr = slave_addr, + .flags = I2C_M_RD, + .len = size, + .buf = in_buf, + } + }; + + out_buf[0] = offset; + out_buf[1] = 0; + + if (i2c_transfer(adapter, msgs, 2) != 2) + printk(KERN_WARNING "%s failed\n", __func__); + else + *buffer = in_buf[0]; +} + +void via_i2c_writebytes(struct i2c_adapter *adapter, + u8 slave_addr, char offset, + u8 *data, unsigned int size) +{ + struct i2c_msg msg = { 0 }; + u8 *out_buf; + + out_buf = kzalloc(size + 1, GFP_KERNEL); + out_buf[0] = offset; + memcpy(&out_buf[1], data, size); + msg.addr = slave_addr; + msg.flags = 0; + msg.len = size + 1; + msg.buf = out_buf; + + if (i2c_transfer(adapter, &msg, 1) != 1) + printk(KERN_WARNING "%s failed\n", __func__); + + kfree(out_buf); +} + +void via_i2c_reg_init(struct via_drm_priv *dev_priv) +{ + svga_wseq_mask(VGABASE, 0x31, 0x30, 0x30); + svga_wseq_mask(VGABASE, 0x26, 0x30, 0x30); + vga_wseq(VGABASE, 0x2C, 0xc2); + vga_wseq(VGABASE, 0x3D, 0xc0); + svga_wseq_mask(VGABASE, 0x2C, 0x30, 0x30); + svga_wseq_mask(VGABASE, 0x3D, 0x30, 0x30); +} + +int via_i2c_init(struct drm_device *dev) +{ + int types[] = { SERIAL, SERIAL, GPIO, GPIO, GPIO }; + int ports[] = { 0x26, 0x31, 0x25, 0x2C, 0x3D }; + int count = ARRAY_SIZE(via_i2c_par), ret, i; + struct via_i2c_stuff *i2c = via_i2c_par; + + for (i = 0; i < count; i++) { + i2c->is_active = types[i]; + i2c->i2c_port = ports[i]; + + ret = create_i2c_bus(dev, i2c); + if (ret < 0) + DRM_ERROR("cannot create i2c bus %x:%d\n", + ports[i], ret); + i2c++; + } + return 0; +} + +void via_i2c_exit(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(via_i2c_par); i++) + i2c_del_adapter(&via_i2c_par->adapter); +} -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 15/28] drm/via: Add via_init.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (13 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 14/28] drm/via: Add via_i2c.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 16/28] drm/via: Add via_ioctl.c Kevin Brace ` (5 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_init.c | 1300 ++++++++++++++++++++++++++++++++ 1 file changed, 1300 insertions(+) create mode 100644 drivers/gpu/drm/via/via_init.c diff --git a/drivers/gpu/drm/via/via_init.c b/drivers/gpu/drm/via/via_init.c new file mode 100644 index 000000000000..a46b9fb79884 --- /dev/null +++ b/drivers/gpu/drm/via/via_init.c @@ -0,0 +1,1300 @@ +/* + * Copyright © 2019 Kevin Brace. + * Copyright 2012 James Simmons. All Rights Reserved. + * Copyright 2006-2009 Luc Verhaegen. + * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2009 S3 Graphics, Inc. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * Kevin Brace <kevinbrace@bracecomputerlab.com> + * James Simmons <jsimmons@infradead.org> + * Luc Verhaegen + */ + +#include <linux/pci.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_mode_config.h> + +#include "via_drv.h" + + +static int cle266_mem_type(struct via_drm_priv *dev_priv, + struct pci_dev *bridge) +{ + u8 type, fsb, freq; + int ret; + + ret = pci_read_config_byte(bridge, 0x54, &fsb); + if (ret) + return ret; + ret = pci_read_config_byte(bridge, 0x69, &freq); + if (ret) + return ret; + + freq >>= 6; + fsb >>= 6; + + /* FSB frequency */ + switch (fsb) { + case 0x01: /* 100MHz */ + switch (freq) { + case 0x00: + freq = 100; + break; + case 0x01: + freq = 133; + break; + case 0x02: + freq = 66; + break; + default: + freq = 0; + break; + } + break; + + case 0x02: /* 133 MHz */ + case 0x03: + switch (freq) { + case 0x00: + freq = 133; + break; + case 0x02: + freq = 100; + break; + default: + freq = 0; + break; + } + break; + default: + freq = 0; + break; + } + + ret = pci_read_config_byte(bridge, 0x60, &fsb); + if (ret) + return ret; + ret = pci_read_config_byte(bridge, 0xE3, &type); + if (ret) + return ret; + + /* On bank 2/3 */ + if (type & 0x02) + fsb >>= 2; + + /* Memory type */ + switch (fsb & 0x03) { + case 0x00: /* SDR */ + switch (freq) { + case 66: + dev_priv->vram_type = VIA_MEM_SDR66; + break; + case 100: + dev_priv->vram_type = VIA_MEM_SDR100; + break; + case 133: + dev_priv->vram_type = VIA_MEM_SDR133; + break; + default: + break; + } + break; + + case 0x02: /* DDR */ + switch (freq) { + case 100: + dev_priv->vram_type = VIA_MEM_DDR_200; + break; + case 133: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + default: + break; + } + break; + default: + break; + } + return ret; +} + +static int km400_mem_type(struct via_drm_priv *dev_priv, + struct pci_dev *bridge) +{ + u8 fsb, freq, rev; + int ret; + + ret = pci_read_config_byte(bridge, 0xF6, &rev); + if (ret) + return ret; + ret = pci_read_config_byte(bridge, 0x54, &fsb); + if (ret) + return ret; + ret = pci_read_config_byte(bridge, 0x69, &freq); + if (ret) + return ret; + + freq >>= 6; + fsb >>= 6; + + /* KM400 */ + if (rev < 0x80) { + /* FSB frequency */ + switch (fsb) { + case 0x00: + switch (freq) { + case 0x00: + dev_priv->vram_type = VIA_MEM_DDR_200; + break; + case 0x01: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + case 0x02: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + case 0x03: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + default: + break; + } + break; + + case 0x01: + switch (freq) { + case 0x00: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + case 0x01: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + case 0x02: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + default: + break; + } + break; + + case 0x02: + case 0x03: + switch (freq) { + case 0x00: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + case 0x02: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + case 0x03: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + default: + break; + } + break; + default: + break; + } + } else { + /* KM400A */ + ret = pci_read_config_byte(bridge, 0x67, &rev); + if (ret) + return ret; + if (rev & 0x80) + freq |= 0x04; + + switch (fsb) { + case 0x00: + switch (freq) { + case 0x00: + dev_priv->vram_type = VIA_MEM_DDR_200; + break; + case 0x01: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + case 0x03: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + case 0x07: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + default: + dev_priv->vram_type = VIA_MEM_NONE; + break; + } + break; + + case 0x01: + switch (freq) { + case 0x00: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + case 0x01: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + case 0x03: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + default: + break; + } + break; + + case 0x02: + switch (freq) { + case 0x00: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + case 0x04: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + case 0x06: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + default: + break; + } + break; + + case 0x03: + switch (freq) { + case 0x00: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + case 0x01: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + case 0x04: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + default: + break; + } + break; + default: + break; + } + } + return ret; +} + +static int p4m800_mem_type(struct via_drm_priv *dev_priv, + struct pci_bus *bus, + struct pci_dev *fn3) +{ + struct pci_dev *fn4 = pci_get_slot(bus, PCI_DEVFN(0, 4)); + int ret, freq = 0; + u8 type, fsb; + + /* VIA Scratch region */ + ret = pci_read_config_byte(fn4, 0xF3, &fsb); + if (ret) { + pci_dev_put(fn4); + return ret; + } + + switch (fsb >> 5) { + case 0: + freq = 3; /* 100 MHz */ + break; + case 1: + freq = 4; /* 133 MHz */ + break; + case 3: + freq = 5; /* 166 MHz */ + break; + case 2: + freq = 6; /* 200 MHz */ + break; + case 4: + freq = 7; /* 233 MHz */ + break; + default: + break; + } + pci_dev_put(fn4); + + ret = pci_read_config_byte(fn3, 0x68, &type); + if (ret) + return ret; + type &= 0x0f; + + if (type & 0x02) + freq -= type >> 2; + else { + freq += type >> 2; + if (type & 0x01) + freq++; + } + + switch (freq) { + case 0x03: + dev_priv->vram_type = VIA_MEM_DDR_200; + break; + case 0x04: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + case 0x05: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + case 0x06: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + default: + break; + } + return ret; +} + +static int km8xx_mem_type(struct via_drm_priv *dev_priv) +{ + struct pci_dev *dram, *misc = NULL; + int ret = -ENXIO; + u8 type, tmp; + + dram = pci_get_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_K8_NB_MEMCTL, NULL); + if (dram) { + misc = pci_get_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_K8_NB_MISC, NULL); + + ret = pci_read_config_byte(misc, 0xFD, &type); + if (type) { + pci_read_config_byte(dram, 0x94, &type); + switch (type & 0x03) { + case 0x00: + dev_priv->vram_type = VIA_MEM_DDR2_400; + break; + case 0x01: + dev_priv->vram_type = VIA_MEM_DDR2_533; + break; + case 0x02: + dev_priv->vram_type = VIA_MEM_DDR2_667; + break; + case 0x03: + dev_priv->vram_type = VIA_MEM_DDR2_800; + break; + default: + break; + } + } else { + ret = pci_read_config_byte(dram, 0x96, &type); + if (ret) + return ret; + type >>= 4; + type &= 0x07; + + switch (type) { + case 0x00: + dev_priv->vram_type = VIA_MEM_DDR_200; + break; + case 0x02: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + case 0x05: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + case 0x07: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + default: + break; + } + } + } + + /* AMD 10h DRAM Controller */ + dram = pci_get_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_10H_NB_DRAM, NULL); + if (dram) { + ret = pci_read_config_byte(misc, 0x94, &tmp); + if (ret) + return ret; + ret = pci_read_config_byte(misc, 0x95, &type); + if (ret) + return ret; + + if (type & 0x01) { /* DDR3 */ + switch (tmp & 0x07) { + case 0x03: + dev_priv->vram_type = VIA_MEM_DDR3_800; + break; + case 0x04: + dev_priv->vram_type = VIA_MEM_DDR3_1066; + break; + case 0x05: + dev_priv->vram_type = VIA_MEM_DDR3_1333; + break; + case 0x06: + dev_priv->vram_type = VIA_MEM_DDR3_1600; + break; + default: + break; + } + } else { /* DDR2 */ + switch (tmp & 0x07) { + case 0x00: + dev_priv->vram_type = VIA_MEM_DDR2_400; + break; + case 0x01: + dev_priv->vram_type = VIA_MEM_DDR2_533; + break; + case 0x02: + dev_priv->vram_type = VIA_MEM_DDR2_667; + break; + case 0x03: + dev_priv->vram_type = VIA_MEM_DDR2_800; + break; + case 0x04: + dev_priv->vram_type = VIA_MEM_DDR2_1066; + break; + default: + break; + } + } + } + + /* AMD 11h DRAM Controller */ + dram = pci_get_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_11H_NB_DRAM, NULL); + if (dram) { + ret = pci_read_config_byte(misc, 0x94, &type); + if (ret) + return ret; + + switch (tmp & 0x07) { + case 0x01: + dev_priv->vram_type = VIA_MEM_DDR2_533; + break; + case 0x02: + dev_priv->vram_type = VIA_MEM_DDR2_667; + break; + case 0x03: + dev_priv->vram_type = VIA_MEM_DDR2_800; + break; + default: + break; + } + } + return ret; +} + +static int cn400_mem_type(struct via_drm_priv *dev_priv, + struct pci_bus *bus, + struct pci_dev *fn3) +{ + struct pci_dev *fn2 = pci_get_slot(bus, PCI_DEVFN(0, 2)); + int ret, freq = 0; + u8 type, fsb; + + ret = pci_read_config_byte(fn2, 0x54, &fsb); + if (ret) { + pci_dev_put(fn2); + return ret; + } + + switch (fsb >> 5) { + case 0: + freq = 3; /* 100 MHz */ + break; + case 1: + freq = 4; /* 133 MHz */ + break; + case 3: + freq = 5; /* 166 MHz */ + break; + case 2: + freq = 6; /* 200 MHz */ + break; + case 4: + freq = 7; /* 233 MHz */ + break; + default: + break; + } + pci_dev_put(fn2); + + ret = pci_read_config_byte(fn3, 0x68, &type); + if (ret) + return ret; + type &= 0x0f; + + if (type & 0x01) + freq += 1 + (type >> 2); + else + freq -= 1 + (type >> 2); + + switch (freq) { + case 0x03: + dev_priv->vram_type = VIA_MEM_DDR_200; + break; + case 0x04: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + case 0x05: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + case 0x06: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + default: + break; + } + return ret; +} + +static int cn700_mem_type(struct via_drm_priv *dev_priv, + struct pci_dev *fn3) +{ + int ret; + u8 tmp; + + ret = pci_read_config_byte(fn3, 0x90, &tmp); + if (!ret) { + switch (tmp & 0x07) { + case 0x00: + dev_priv->vram_type = VIA_MEM_DDR_200; + break; + case 0x01: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + case 0x02: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + case 0x03: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + case 0x04: + dev_priv->vram_type = VIA_MEM_DDR2_400; + break; + case 0x05: + dev_priv->vram_type = VIA_MEM_DDR2_533; + break; + default: + break; + } + } + return ret; +} + +static int cx700_mem_type(struct via_drm_priv *dev_priv, + struct pci_dev *fn3) +{ + u8 type, clock; + int ret; + + ret = pci_read_config_byte(fn3, 0x90, &clock); + if (ret) + return ret; + ret = pci_read_config_byte(fn3, 0x6C, &type); + if (ret) + return ret; + type &= 0x40; + type >>= 6; + + switch (type) { + case 0: + switch (clock & 0x07) { + case 0: + dev_priv->vram_type = VIA_MEM_DDR_200; + break; + case 1: + dev_priv->vram_type = VIA_MEM_DDR_266; + break; + case 2: + dev_priv->vram_type = VIA_MEM_DDR_333; + break; + case 3: + dev_priv->vram_type = VIA_MEM_DDR_400; + break; + default: + break; + } + break; + + case 1: + switch (clock & 0x07) { + case 3: + dev_priv->vram_type = VIA_MEM_DDR2_400; + break; + case 4: + dev_priv->vram_type = VIA_MEM_DDR2_533; + break; + case 5: + dev_priv->vram_type = VIA_MEM_DDR2_667; + break; + case 6: + dev_priv->vram_type = VIA_MEM_DDR2_800; + break; + default: + break; + } + break; + default: + break; + } + return ret; +} + +static int vx900_mem_type(struct via_drm_priv *dev_priv, + struct pci_dev *fn3) +{ + int ret; + u8 clock, type, volt; + + ret = pci_read_config_byte(fn3, 0x90, &clock); + if (ret) + return ret; + ret = pci_read_config_byte(fn3, 0x6C, &type); + if (ret) + return ret; + volt = type; + type &= 0xC0; + type >>= 6; + volt &= 0x20; + volt >>= 5; + + switch (type) { + case 1: + switch (clock & 0x0F) { + case 0: + if (volt) + dev_priv->vram_type = VIA_MEM_DDR2_800; + else + dev_priv->vram_type = VIA_MEM_DDR2_533; + break; + case 4: + dev_priv->vram_type = VIA_MEM_DDR2_533; + break; + case 5: + dev_priv->vram_type = VIA_MEM_DDR2_667; + break; + case 6: + dev_priv->vram_type = VIA_MEM_DDR2_800; + break; + case 7: + dev_priv->vram_type = VIA_MEM_DDR2_1066; + break; + default: + break; + } + break; + case 2: + switch (clock & 0x0F) { + case 0: + if (volt) + dev_priv->vram_type = VIA_MEM_DDR3_800; + else + dev_priv->vram_type = VIA_MEM_DDR3_533; + break; + case 4: + dev_priv->vram_type = VIA_MEM_DDR3_533; + break; + case 5: + dev_priv->vram_type = VIA_MEM_DDR3_667; + break; + case 6: + dev_priv->vram_type = VIA_MEM_DDR3_800; + break; + case 7: + dev_priv->vram_type = VIA_MEM_DDR3_1066; + break; + default: + break; + } + break; + } + return ret; +} + +int via_vram_detect(struct via_drm_priv *dev_priv) +{ + struct drm_device *dev = &dev_priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct pci_dev *bridge = NULL; + struct pci_dev *fn3 = NULL; + char *name = "unknown"; + struct pci_bus *bus; + u8 size; + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + bus = pci_find_bus(0, 0); + if (bus == NULL) { + ret = -EINVAL; + goto out_err; + } + + bridge = pci_get_slot(bus, PCI_DEVFN(0, 0)); + fn3 = pci_get_slot(bus, PCI_DEVFN(0, 3)); + + if (!bridge) { + ret = -EINVAL; + DRM_ERROR("No host bridge found...\n"); + goto out_err; + } + + if (!fn3 && pdev->device != PCI_DEVICE_ID_VIA_CLE266 + && pdev->device != PCI_DEVICE_ID_VIA_KM400) { + ret = -EINVAL; + DRM_ERROR("No function 3 on host bridge...\n"); + goto out_err; + } + + if (pdev->device == PCI_DEVICE_ID_VIA_VX900_VGA) { + dev_priv->vram_start = pci_resource_start(pdev, 2); + } else { + dev_priv->vram_start = pci_resource_start(pdev, 0); + } + + switch (bridge->device) { + + /* CLE266 */ + case PCI_DEVICE_ID_VIA_862X_0: + ret = cle266_mem_type(dev_priv, bridge); + if (ret) + goto out_err; + + ret = pci_read_config_byte(bridge, 0xE1, &size); + if (ret) + goto out_err; + dev_priv->vram_size = (1 << ((size & 0x70) >> 4)) << 20; + break; + + /* KM400 / KN400 / KM400A / KN400A */ + case PCI_DEVICE_ID_VIA_8378_0: + ret = km400_mem_type(dev_priv, bridge); + + ret = pci_read_config_byte(bridge, 0xE1, &size); + if (ret) + goto out_err; + dev_priv->vram_size = (1 << ((size & 0x70) >> 4)) << 20; + break; + + /* P4M800 */ + case PCI_DEVICE_ID_VIA_3296_0: + ret = p4m800_mem_type(dev_priv, bus, fn3); + + ret = pci_read_config_byte(fn3, 0xA1, &size); + if (ret) + goto out_err; + dev_priv->vram_size = (1 << ((size & 0x70) >> 4)) << 20; + break; + + /* K8M800 / K8N800 */ + case PCI_DEVICE_ID_VIA_8380_0: + /* K8M890 */ + case PCI_DEVICE_ID_VIA_VT3336: + ret = pci_read_config_byte(fn3, 0xA1, &size); + if (ret) + goto out_err; + dev_priv->vram_size = (1 << ((size & 0x70) >> 4)) << 20; + + if (bridge->device == PCI_DEVICE_ID_VIA_VT3336) + dev_priv->vram_size <<= 2; + + ret = km8xx_mem_type(dev_priv); + if (ret) + goto out_err; + break; + + /* CN400 / PM800 / PM880 */ + case PCI_DEVICE_ID_VIA_PX8X0_0: + ret = pci_read_config_byte(fn3, 0xA1, &size); + if (ret) + goto out_err; + dev_priv->vram_size = (1 << ((size & 0x70) >> 4)) << 20; + + ret = cn400_mem_type(dev_priv, bus, fn3); + if (ret) + goto out_err; + break; + + /* P4M800CE / P4M800 Pro / VN800 / CN700 */ + case PCI_DEVICE_ID_VIA_P4M800CE: + /* P4M900 / VN896 / CN896 */ + case PCI_DEVICE_ID_VIA_VT3364: + ret = pci_read_config_byte(fn3, 0xA1, &size); + if (ret) + goto out_err; + dev_priv->vram_size = (1 << ((size & 0x70) >> 4)) << 20; + + if (bridge->device != PCI_DEVICE_ID_VIA_P4M800CE) + dev_priv->vram_size <<= 2; + + ret = cn700_mem_type(dev_priv, fn3); + if (ret) + goto out_err; + break; + + /* CX700 / VX700 */ + case PCI_DEVICE_ID_VIA_VT3324: + /* P4M890 / VN890 */ + case PCI_DEVICE_ID_VIA_P4M890: + /* VX800 / VX820 */ + case PCI_DEVICE_ID_VIA_VT3353: + /* VX855 / VX875 */ + case PCI_DEVICE_ID_VIA_VT3409: + ret = pci_read_config_byte(fn3, 0xA1, &size); + if (ret) + goto out_err; + dev_priv->vram_size = (1 << ((size & 0x70) >> 4)) << 22; + + ret = cx700_mem_type(dev_priv, fn3); + if (ret) + goto out_err; + break; + + /* VX900 */ + case PCI_DEVICE_ID_VIA_VT3410: + ret = pci_read_config_byte(fn3, 0xA1, &size); + if (ret) + goto out_err; + dev_priv->vram_size = (1 << ((size & 0x70) >> 4)) << 22; + + ret = vx900_mem_type(dev_priv, fn3); + if (ret) + goto out_err; + break; + + default: + DRM_ERROR("Unknown north bridge device: 0x%04x\n", + bridge->device); + goto out_err; + } + + switch (dev_priv->vram_type) { + case VIA_MEM_SDR66: + name = "SDR 66"; + break; + case VIA_MEM_SDR100: + name = "SDR 100"; + break; + case VIA_MEM_SDR133: + name = "SDR 133"; + break; + case VIA_MEM_DDR_200: + name = "DDR 200"; + break; + case VIA_MEM_DDR_266: + name = "DDR 266"; + break; + case VIA_MEM_DDR_333: + name = "DDR 333"; + break; + case VIA_MEM_DDR_400: + name = "DDR 400"; + break; + case VIA_MEM_DDR2_400: + name = "DDR2 400"; + break; + case VIA_MEM_DDR2_533: + name = "DDR2 533"; + break; + case VIA_MEM_DDR2_667: + name = "DDR2 667"; + break; + case VIA_MEM_DDR2_800: + name = "DDR2 800"; + break; + case VIA_MEM_DDR2_1066: + name = "DDR2 1066"; + break; + case VIA_MEM_DDR3_533: + name = "DDR3 533"; + break; + case VIA_MEM_DDR3_667: + name = "DDR3 667"; + break; + case VIA_MEM_DDR3_800: + name = "DDR3 800"; + break; + case VIA_MEM_DDR3_1066: + name = "DDR3 1066"; + break; + case VIA_MEM_DDR3_1333: + name = "DDR3 1333"; + break; + case VIA_MEM_DDR3_1600: + name = "DDR3 1600"; + break; + default: + break; + } + + DRM_INFO("Found %s video RAM.\n", name); +out_err: + if (bridge) + pci_dev_put(bridge); + if (fn3) + pci_dev_put(fn3); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static void via_flag_init(struct via_drm_priv *dev_priv) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* Set this flag for ttm_bo_device_init. */ + dev_priv->need_dma32 = true; + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_quirks_init(struct via_drm_priv *dev_priv) +{ + struct drm_device *dev = &dev_priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* + * Checking for VIA Technologies NanoBook reference design. + * Examples include Everex CloudBook and Sylvania g netbook. + * It is also called FIC CE260 or CE261 by its ODM (Original + * Design Manufacturer) name. + * This device has its strapping resistors set to a wrong + * setting to handle DVI. As a result, the code needs to know + * this in order to support DVI properly. + */ + if ((pdev->device == PCI_DEVICE_ID_VIA_VT3157) && + (pdev->subsystem_vendor == 0x1509) && + (pdev->subsystem_device == 0x2d30)) { + dev_priv->is_via_nanobook = true; + } else { + dev_priv->is_via_nanobook = false; + } + + /* + * Check for Quanta IL1 netbook. This is necessary + * due to its flat panel connected to DVP1 (Digital + * Video Port 1) rather than its LVDS channel. + */ + if ((pdev->device == PCI_DEVICE_ID_VIA_VT1122) && + (pdev->subsystem_vendor == 0x152d) && + (pdev->subsystem_device == 0x0771)) { + dev_priv->is_quanta_il1 = true; + } else { + dev_priv->is_quanta_il1 = false; + } + + /* + * Samsung NC20 netbook has its FP connected to LVDS2 + * rather than the more logical LVDS1, hence, a special + * flag register is needed for properly controlling its + * FP. + */ + if ((pdev->device == PCI_DEVICE_ID_VIA_VT1122) && + (pdev->subsystem_vendor == 0x144d) && + (pdev->subsystem_device == 0xc04e)) { + dev_priv->is_samsung_nc20 = true; + } else { + dev_priv->is_samsung_nc20 = false; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +int via_vram_init(struct via_drm_priv *dev_priv) +{ + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* Add an MTRR for the video RAM. */ + dev_priv->vram_mtrr = arch_phys_wc_add(dev_priv->vram_start, + dev_priv->vram_size); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +void via_vram_fini(struct via_drm_priv *dev_priv) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (dev_priv->vram_mtrr) { + arch_phys_wc_del(dev_priv->vram_mtrr); + arch_io_free_memtype_wc(dev_priv->vram_start, + dev_priv->vram_size); + dev_priv->vram_mtrr = 0; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +int via_mmio_init(struct via_drm_priv *dev_priv) +{ + struct drm_device *dev = &dev_priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* + * PCI BAR1 is the MMIO memory window for all + * VIA Technologies Chrome IGPs. + * Obtain the starting base address and size, and + * map it to the OS for use. + */ + dev_priv->mmio_base = pci_resource_start(pdev, 1); + dev_priv->mmio_size = pci_resource_len(pdev, 1); + dev_priv->mmio = ioremap(dev_priv->mmio_base, + dev_priv->mmio_size); + if (!dev_priv->mmio) { + ret = -ENOMEM; + goto exit; + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +void via_mmio_fini(struct via_drm_priv *dev_priv) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (dev_priv->mmio) { + iounmap(dev_priv->mmio); + dev_priv->mmio = NULL; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +void via_graphics_unlock(struct via_drm_priv *dev_priv) +{ + uint8_t temp; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* + * Enable VGA subsystem. + */ + temp = vga_io_r(0x03C3); + vga_io_w(0x03C3, temp | 0x01); + svga_wmisc_mask(VGABASE, BIT(0), BIT(0)); + + /* + * Unlock VIA Technologies Chrome IGP extended + * registers. + */ + svga_wseq_mask(VGABASE, 0x10, BIT(0), BIT(0)); + + /* + * Unlock VIA Technologies Chrome IGP extended + * graphics functionality. + */ + svga_wseq_mask(VGABASE, 0x1a, BIT(3), BIT(3)); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +void chip_revision_info(struct via_drm_priv *dev_priv) +{ + struct drm_device *dev = &dev_priv->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + u8 tmp; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch (pdev->device) { + /* CLE266 Chipset */ + case PCI_DEVICE_ID_VIA_CLE266: + /* CR4F only defined in CLE266.CX chipset. */ + tmp = vga_rcrt(VGABASE, 0x4F); + vga_wcrt(VGABASE, 0x4F, 0x55); + if (vga_rcrt(VGABASE, 0x4F) != 0x55) { + dev_priv->revision = CLE266_REVISION_AX; + } else { + dev_priv->revision = CLE266_REVISION_CX; + } + + /* Restore original CR4F value. */ + vga_wcrt(VGABASE, 0x4F, tmp); + break; + /* CX700 / VX700 Chipset */ + case PCI_DEVICE_ID_VIA_VT3157: + tmp = vga_rseq(VGABASE, 0x43); + if (tmp & 0x02) { + dev_priv->revision = CX700_REVISION_700M2; + } else if (tmp & 0x40) { + dev_priv->revision = CX700_REVISION_700M; + } else { + dev_priv->revision = CX700_REVISION_700; + } + + break; + /* VX800 / VX820 Chipset */ + case PCI_DEVICE_ID_VIA_VT1122: + break; + /* VX855 / VX875 Chipset */ + case PCI_DEVICE_ID_VIA_VX875: + /* VX900 Chipset */ + case PCI_DEVICE_ID_VIA_VX900_VGA: + dev_priv->revision = vga_rseq(VGABASE, 0x3B); + break; + default: + break; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +int via_device_init(struct via_drm_priv *dev_priv) +{ + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + via_flag_init(dev_priv); + via_quirks_init(dev_priv); + + ret = via_vram_detect(dev_priv); + if (ret) { + DRM_ERROR("Failed to detect video RAM.\n"); + goto exit; + } + + /* + * Map VRAM. + */ + ret = via_vram_init(dev_priv); + if (ret) { + DRM_ERROR("Failed to initialize video RAM.\n"); + goto exit; + } + + ret = via_mmio_init(dev_priv); + if (ret) { + DRM_ERROR("Failed to initialize MMIO.\n"); + goto exit; + } + + via_graphics_unlock(dev_priv); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +void via_device_fini(struct via_drm_priv *dev_priv) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + via_mmio_fini(dev_priv); + via_vram_fini(dev_priv); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static const struct drm_mode_config_funcs via_drm_mode_config_funcs = { + .fb_create = drm_gem_fb_create, + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, +}; + +void via_mode_config_init(struct via_drm_priv *dev_priv) +{ + struct drm_device *dev = &dev_priv->dev; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + drm_mode_config_init(dev); + + dev->mode_config.min_width = 0; + dev->mode_config.min_height = 0; + dev->mode_config.max_width = 2044; + dev->mode_config.max_height = 4096; + + dev->mode_config.funcs = &via_drm_mode_config_funcs; + + dev->mode_config.fb_base = dev_priv->vram_start; + + dev->mode_config.preferred_depth = 24; + dev->mode_config.prefer_shadow_fbdev = true; + + dev->mode_config.cursor_width = + dev->mode_config.cursor_height = VIA_CURSOR_SIZE; + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +int via_drm_init(struct drm_device *dev) +{ + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + dev_priv->vram_mtrr = -ENXIO; + + ret = via_device_init(dev_priv); + if (ret) { + DRM_ERROR("Failed to initialize Chrome IGP.\n"); + goto exit; + } + + ret = via_mm_init(dev_priv); + if (ret) { + DRM_ERROR("Failed to initialize TTM.\n"); + goto exit; + } + + chip_revision_info(dev_priv); + + ret = via_modeset_init(dev); + if (ret) { + DRM_ERROR("Failed to initialize mode setting.\n"); + goto error_modeset; + } + + goto exit; +error_modeset: + via_modeset_fini(dev); + via_mm_fini(dev_priv); + via_mmio_fini(dev_priv); + via_vram_fini(dev_priv); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +void via_drm_fini(struct drm_device *dev) +{ + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + via_modeset_fini(dev); + via_mm_fini(dev_priv); + via_mmio_fini(dev_priv); + via_vram_fini(dev_priv); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 16/28] drm/via: Add via_ioctl.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (14 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 15/28] drm/via: Add via_init.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 17/28] drm/via: Add via_lvds.c Kevin Brace ` (4 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_ioctl.c | 122 ++++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100644 drivers/gpu/drm/via/via_ioctl.c diff --git a/drivers/gpu/drm/via/via_ioctl.c b/drivers/gpu/drm/via/via_ioctl.c new file mode 100644 index 000000000000..24d72bf4d53a --- /dev/null +++ b/drivers/gpu/drm/via/via_ioctl.c @@ -0,0 +1,122 @@ +/* + * Copyright © 2020 Kevin Brace. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * Kevin Brace <kevinbrace@bracecomputerlab.com> + */ + +#include <drm/drm_gem.h> +#include <drm/drm_ioctl.h> + +#include <drm/ttm/ttm_bo_api.h> + +#include <uapi/drm/via_drm.h> + +#include "via_drv.h" + + +static int via_gem_create_ioctl(struct drm_device *dev, + void *data, + struct drm_file *file_priv) +{ + struct drm_via_gem_create *args = data; + struct ttm_buffer_object *ttm_bo; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct via_bo *bo; + uint32_t handle; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + ret = via_bo_create(dev, &dev_priv->bdev, args->size, + ttm_bo_type_device, args->domain, false, &bo); + if (ret) { + goto exit; + } + + ttm_bo = &bo->ttm_bo; + + ret = drm_gem_handle_create(file_priv, &ttm_bo->base, &handle); + drm_gem_object_put(&ttm_bo->base); + if (ret) { + via_bo_destroy(bo, false); + goto exit; + } + + args->size = ttm_bo->base.size; + args->domain = ttm_bo->resource->placement; + args->handle = handle; + args->offset = ttm_bo->resource->start << PAGE_SHIFT; +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static int via_gem_map_ioctl(struct drm_device *dev, + void *data, + struct drm_file *file_priv) +{ + struct drm_via_gem_map *args = data; + struct drm_gem_object *gem; + struct ttm_buffer_object *ttm_bo; + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + gem = drm_gem_object_lookup(file_priv, args->handle); + if (!gem) { + ret = -EINVAL; + goto exit; + } + + ttm_bo = container_of(gem, struct ttm_buffer_object, base); + + args->map_offset = drm_vma_node_offset_addr(&ttm_bo->base.vma_node); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static int via_gem_unmap_ioctl(struct drm_device *dev, + void *data, + struct drm_file *file_priv) +{ + struct drm_via_gem_unmap *args = data; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + ret = drm_gem_handle_delete(file_priv, args->handle); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + + +const struct drm_ioctl_desc via_driver_ioctls[] = { + DRM_IOCTL_DEF_DRV(VIA_GEM_CREATE, via_gem_create_ioctl, DRM_AUTH | DRM_UNLOCKED), + DRM_IOCTL_DEF_DRV(VIA_GEM_MAP, via_gem_map_ioctl, DRM_AUTH | DRM_UNLOCKED), + DRM_IOCTL_DEF_DRV(VIA_GEM_UNMAP, via_gem_unmap_ioctl, DRM_AUTH | DRM_UNLOCKED), +}; + + +int via_driver_num_ioctls = ARRAY_SIZE(via_driver_ioctls); -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 17/28] drm/via: Add via_lvds.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (15 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 16/28] drm/via: Add via_ioctl.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 18/28] drm/via: Add via_object.c Kevin Brace ` (3 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_lvds.c | 1420 ++++++++++++++++++++++++++++++++ 1 file changed, 1420 insertions(+) create mode 100644 drivers/gpu/drm/via/via_lvds.c diff --git a/drivers/gpu/drm/via/via_lvds.c b/drivers/gpu/drm/via/via_lvds.c new file mode 100644 index 000000000000..44f80cc0d6ef --- /dev/null +++ b/drivers/gpu/drm/via/via_lvds.c @@ -0,0 +1,1420 @@ +/* + * Copyright © 2016-2018 Kevin Brace. + * Copyright 2012 James Simmons. All Rights Reserved. + * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * Kevin Brace <kevinbrace@bracecomputerlab.com> + * James Simmons <jsimmons@infradead.org> + */ + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <asm/olpc.h> + +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_probe_helper.h> + +#include "via_drv.h" + +#define TD0 200 +#define TD1 25 +#define TD2 0 +#define TD3 25 + +/* Non-I2C bus FP native screen resolution information table.*/ +static via_lvds_info via_lvds_info_table[] = { + { 640, 480}, + { 800, 600}, + {1024, 768}, + {1280, 768}, + {1280, 1024}, + {1400, 1050}, + {1600, 1200}, + {1280, 800}, + { 800, 480}, + {1024, 768}, + {1366, 768}, + {1024, 768}, + {1280, 768}, + {1280, 1024}, + {1400, 1050}, + {1600, 1200} +}; + +/* Power sequence relations */ +struct td_timer { + struct vga_regset tdRegs[2]; +}; + +static struct td_timer td_timer_regs[] = { + /* td_timer0 */ + { { { VGA_CRT_IC, 0x8B, 0, 7 }, { VGA_CRT_IC, 0x8F, 0, 3 } } }, + /* td_timer1 */ + { { { VGA_CRT_IC, 0x8C, 0, 7 }, { VGA_CRT_IC, 0x8F, 4, 7 } } }, + /* td_timer2 */ + { { { VGA_CRT_IC, 0x8D, 0, 7 }, { VGA_CRT_IC, 0x90, 0, 3 } } }, + /* td_timer3 */ + { { { VGA_CRT_IC, 0x8E, 0, 7 }, { VGA_CRT_IC, 0x90, 4, 7 } } } +}; + +/* + * Function Name: via_init_td_timing_regs + * Description: Init TD timing register (power sequence) + */ +static void via_init_td_timing_regs(struct drm_device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + unsigned int td_timer[4] = { 500, 50, 0, 510 }, i; + struct vga_registers timings; + u32 reg_value; + + /* Fill primary power sequence */ + for (i = 0; i < 4; i++) { + /* Calculate TD Timer, every step is 572.1uSec */ + reg_value = td_timer[i] * 10000 / 5721; + + timings.count = ARRAY_SIZE(td_timer_regs[i].tdRegs); + timings.regs = td_timer_regs[i].tdRegs; + load_value_to_registers(VGABASE, &timings, reg_value); + } + + /* Note: VT3353 have two hardware power sequences + * other chips only have one hardware power sequence */ + if (pdev->device == PCI_DEVICE_ID_VIA_VT1122) { + /* set CRD4[0] to "1" to select 2nd LCD power sequence. */ + svga_wcrt_mask(VGABASE, 0xD4, BIT(0), BIT(0)); + /* Fill secondary power sequence */ + for (i = 0; i < 4; i++) { + /* Calculate TD Timer, every step is 572.1uSec */ + reg_value = td_timer[i] * 10000 / 5721; + + timings.count = ARRAY_SIZE(td_timer_regs[i].tdRegs); + timings.regs = td_timer_regs[i].tdRegs; + load_value_to_registers(VGABASE, &timings, reg_value); + } + } +} + +static bool via_fp_probe_edid(struct i2c_adapter *i2c_bus) +{ + u8 out = 0x0; + u8 buf[8]; + struct i2c_msg msgs[] = { + { + .addr = DDC_ADDR, + .flags = 0, + .len = 1, + .buf = &out, + }, + { + .addr = DDC_ADDR, + .flags = I2C_M_RD, + .len = 8, + .buf = buf, + } + }; + int i2c_ret; + bool ret = false; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + i2c_ret = i2c_transfer(i2c_bus, msgs, 2); + if (i2c_ret != 2) { + goto exit; + } + + if (drm_edid_header_is_valid(buf) < 6) { + goto exit; + } + + ret = true; +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +/* caculate the cetering timing using mode and adjusted_mode */ +static void via_centering_timing(const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + int panel_hsync_time = adjusted_mode->hsync_end - + adjusted_mode->hsync_start; + int panel_vsync_time = adjusted_mode->vsync_end - + adjusted_mode->vsync_start; + int panel_hblank_start = adjusted_mode->hdisplay; + int panel_vbank_start = adjusted_mode->vdisplay; + int hborder = (adjusted_mode->hdisplay - mode->hdisplay) / 2; + int vborder = (adjusted_mode->vdisplay - mode->vdisplay) / 2; + int new_hblank_start = hborder + mode->hdisplay; + int new_vblank_start = vborder + mode->vdisplay; + + adjusted_mode->hdisplay = mode->hdisplay; + adjusted_mode->hsync_start = (adjusted_mode->hsync_start - + panel_hblank_start) + new_hblank_start; + adjusted_mode->hsync_end = adjusted_mode->hsync_start + + panel_hsync_time; + adjusted_mode->vdisplay = mode->vdisplay; + adjusted_mode->vsync_start = (adjusted_mode->vsync_start - + panel_vbank_start) + new_vblank_start; + adjusted_mode->vsync_end = adjusted_mode->vsync_start + + panel_vsync_time; + /* Adjust Crtc H and V */ + adjusted_mode->crtc_hdisplay = adjusted_mode->hdisplay; + adjusted_mode->crtc_hblank_start = new_hblank_start; + adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal - hborder; + adjusted_mode->crtc_hsync_start = adjusted_mode->hsync_start; + adjusted_mode->crtc_hsync_end = adjusted_mode->hsync_end; + adjusted_mode->crtc_vdisplay = adjusted_mode->vdisplay; + adjusted_mode->crtc_vblank_start = new_vblank_start; + adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal - vborder; + adjusted_mode->crtc_vsync_start = adjusted_mode->vsync_start; + adjusted_mode->crtc_vsync_end = adjusted_mode->vsync_end; +} + +static void via_lvds_cle266_soft_power_seq(struct via_drm_priv *dev_priv, + bool power_state) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (power_state) { + /* Wait for 25 ms. */ + mdelay(25); + + /* Turn on FP VDD rail. */ + via_lvds_set_primary_soft_vdd(VGABASE, true); + + /* Wait for 510 ms. */ + mdelay(510); + + /* Turn on FP data transmission. */ + via_lvds_set_primary_soft_data(VGABASE, true); + + /* Wait for 1 ms. */ + mdelay(1); + + /* Turn on FP VEE rail. */ + via_lvds_set_primary_soft_vee(VGABASE, true); + + /* Turn on FP back light. */ + via_lvds_set_primary_soft_back_light(VGABASE, true); + } else { + /* Wait for 1 ms. */ + mdelay(1); + + /* Turn off FP back light. */ + via_lvds_set_primary_soft_back_light(VGABASE, false); + + /* Turn off FP VEE rail. */ + via_lvds_set_primary_soft_vee(VGABASE, false); + + /* Wait for 510 ms. */ + mdelay(510); + + /* Turn off FP data transmission. */ + via_lvds_set_primary_soft_data(VGABASE, false); + + /* Wait for 25 ms. */ + mdelay(25); + + /* Turn off FP VDD rail. */ + via_lvds_set_primary_soft_vdd(VGABASE, false); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_lvds_primary_soft_power_seq(struct via_drm_priv *dev_priv, + bool power_state) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* Turn off FP hardware power sequence. */ + via_lvds_set_primary_hard_power(VGABASE, false); + + /* Use software FP power sequence control. */ + via_lvds_set_primary_power_seq_type(VGABASE, false); + + if (power_state) { + /* Turn on FP display period. */ + via_lvds_set_primary_direct_display_period(VGABASE, true); + + /* Wait for TD0 ms. */ + mdelay(TD0); + + /* Turn on FP VDD rail. */ + via_lvds_set_primary_soft_vdd(VGABASE, true); + + /* Wait for TD1 ms. */ + mdelay(TD1); + + /* Turn on FP data transmission. */ + via_lvds_set_primary_soft_data(VGABASE, true); + + /* Wait for TD2 ms. */ + mdelay(TD2); + + /* Turn on FP VEE rail. */ + via_lvds_set_primary_soft_vee(VGABASE, true); + + /* Wait for TD3 ms. */ + mdelay(TD3); + + /* Turn on FP back light. */ + via_lvds_set_primary_soft_back_light(VGABASE, true); + } else { + /* Turn off FP back light. */ + via_lvds_set_primary_soft_back_light(VGABASE, false); + + /* Wait for TD3 ms. */ + mdelay(TD3); + + /* Turn off FP VEE rail. */ + via_lvds_set_primary_soft_vee(VGABASE, false); + + /* Wait for TD2 ms. */ + mdelay(TD2); + + /* Turn off FP data transmission. */ + via_lvds_set_primary_soft_data(VGABASE, false); + + /* Wait for TD1 ms. */ + mdelay(TD1); + + /* Turn off FP VDD rail. */ + via_lvds_set_primary_soft_vdd(VGABASE, false); + + /* Turn off FP display period. */ + via_lvds_set_primary_direct_display_period(VGABASE, false); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_lvds_secondary_soft_power_seq(struct via_drm_priv *dev_priv, + bool power_state) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* Turn off FP hardware power sequence. */ + via_lvds_set_secondary_hard_power(VGABASE, false); + + /* Use software FP power sequence control. */ + via_lvds_set_secondary_power_seq_type(VGABASE, false); + + if (power_state) { + /* Turn on FP display period. */ + via_lvds_set_secondary_direct_display_period(VGABASE, true); + + /* Wait for TD0 ms. */ + mdelay(TD0); + + /* Turn on FP VDD rail. */ + via_lvds_set_secondary_soft_vdd(VGABASE, true); + + /* Wait for TD1 ms. */ + mdelay(TD1); + + /* Turn on FP data transmission. */ + via_lvds_set_secondary_soft_data(VGABASE, true); + + /* Wait for TD2 ms. */ + mdelay(TD2); + + /* Turn on FP VEE rail. */ + via_lvds_set_secondary_soft_vee(VGABASE, true); + + /* Wait for TD3 ms. */ + mdelay(TD3); + + /* Turn on FP back light. */ + via_lvds_set_secondary_soft_back_light(VGABASE, true); + } else { + /* Turn off FP back light. */ + via_lvds_set_secondary_soft_back_light(VGABASE, false); + + /* Wait for TD3 ms. */ + mdelay(TD3); + + /* Turn off FP VEE rail. */ + via_lvds_set_secondary_soft_vee(VGABASE, false); + + /* Wait for TD2 ms. */ + mdelay(TD2); + + /* Turn off FP data transmission. */ + via_lvds_set_secondary_soft_data(VGABASE, false); + + /* Wait for TD1 ms. */ + mdelay(TD1); + + /* Turn off FP VDD rail. */ + via_lvds_set_secondary_soft_vdd(VGABASE, false); + + /* Turn off FP display period. */ + via_lvds_set_secondary_direct_display_period(VGABASE, false); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_lvds_primary_hard_power_seq(struct via_drm_priv *dev_priv, + bool power_state) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* Use hardware FP power sequence control. */ + via_lvds_set_primary_power_seq_type(VGABASE, true); + + if (power_state) { + /* Turn on FP display period. */ + via_lvds_set_primary_direct_display_period(VGABASE, true); + + /* Turn on FP hardware power sequence. */ + via_lvds_set_primary_hard_power(VGABASE, true); + + /* Turn on FP back light. */ + via_lvds_set_primary_direct_back_light_ctrl(VGABASE, true); + } else { + /* Turn off FP back light. */ + via_lvds_set_primary_direct_back_light_ctrl(VGABASE, false); + + /* Turn off FP hardware power sequence. */ + via_lvds_set_primary_hard_power(VGABASE, false); + + /* Turn on FP display period. */ + via_lvds_set_primary_direct_display_period(VGABASE, false); + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_lvds_power(struct via_drm_priv *dev_priv, + unsigned short device, + u32 di_port, bool power_state) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch (device) { + case PCI_DEVICE_ID_VIA_CLE266: + via_lvds_cle266_soft_power_seq(dev_priv, power_state); + break; + case PCI_DEVICE_ID_VIA_KM400: + case PCI_DEVICE_ID_VIA_CN700: + case PCI_DEVICE_ID_VIA_PM800: + case PCI_DEVICE_ID_VIA_K8M800: + case PCI_DEVICE_ID_VIA_VT3343: + case PCI_DEVICE_ID_VIA_K8M890: + case PCI_DEVICE_ID_VIA_P4M900: + via_lvds_primary_hard_power_seq(dev_priv, power_state); + break; + case PCI_DEVICE_ID_VIA_VT3157: + case PCI_DEVICE_ID_VIA_VT1122: + if (di_port & VIA_DI_PORT_LVDS1) { + via_lvds_primary_soft_power_seq(dev_priv, power_state); + via_lvds1_set_power(VGABASE, power_state); + } + + if (di_port & VIA_DI_PORT_LVDS2) { + via_lvds_secondary_soft_power_seq(dev_priv, power_state); + via_lvds2_set_power(VGABASE, power_state); + } + + break; + case PCI_DEVICE_ID_VIA_VX875: + case PCI_DEVICE_ID_VIA_VX900_VGA: + via_lvds_primary_hard_power_seq(dev_priv, power_state); + via_lvds1_set_power(VGABASE, power_state); + break; + default: + DRM_DEBUG_KMS("VIA Technologies Chrome IGP " + "FP Power: Unrecognized " + "PCI Device ID.\n"); + break; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +/* + * Sets flat panel I/O pad state. + */ +static void via_lvds_io_pad_setting(struct via_drm_priv *dev_priv, + u32 di_port, bool io_pad_on) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch(di_port) { + case VIA_DI_PORT_DVP0: + via_dvp0_set_io_pad_state(VGABASE, io_pad_on ? 0x03 : 0x00); + break; + case VIA_DI_PORT_DVP1: + via_dvp1_set_io_pad_state(VGABASE, io_pad_on ? 0x03 : 0x00); + break; + case VIA_DI_PORT_FPDPLOW: + via_fpdp_low_set_io_pad_state(VGABASE, io_pad_on ? 0x03 : 0x00); + break; + case VIA_DI_PORT_FPDPHIGH: + via_fpdp_high_set_io_pad_state(VGABASE, io_pad_on ? 0x03 : 0x00); + break; + case (VIA_DI_PORT_FPDPLOW | + VIA_DI_PORT_FPDPHIGH): + via_fpdp_low_set_io_pad_state(VGABASE, io_pad_on ? 0x03 : 0x00); + via_fpdp_high_set_io_pad_state(VGABASE, io_pad_on ? 0x03 : 0x00); + break; + case VIA_DI_PORT_LVDS1: + via_lvds1_set_io_pad_setting(VGABASE, io_pad_on ? 0x03 : 0x00); + break; + case VIA_DI_PORT_LVDS2: + via_lvds2_set_io_pad_setting(VGABASE, io_pad_on ? 0x03 : 0x00); + break; + case (VIA_DI_PORT_LVDS1 | + VIA_DI_PORT_LVDS2): + via_lvds1_set_io_pad_setting(VGABASE, io_pad_on ? 0x03 : 0x00); + via_lvds2_set_io_pad_setting(VGABASE, io_pad_on ? 0x03 : 0x00); + break; + default: + break; + } + + DRM_DEBUG_KMS("FP I/O Pad: %s\n", io_pad_on ? "On": "Off"); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_lvds_format(struct via_drm_priv *dev_priv, + u32 di_port, u8 format) +{ + u8 temp = format & 0x01; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch(di_port) { + case VIA_DI_PORT_LVDS1: + via_lvds1_set_format(VGABASE, temp); + break; + case VIA_DI_PORT_LVDS2: + via_lvds2_set_format(VGABASE, temp); + break; + case (VIA_DI_PORT_LVDS1 | + VIA_DI_PORT_LVDS2): + via_lvds1_set_format(VGABASE, temp); + via_lvds2_set_format(VGABASE, temp); + break; + default: + break; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_lvds_output_format(struct via_drm_priv *dev_priv, + u32 di_port, u8 output_format) +{ + u8 temp = output_format & 0x01; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch(di_port) { + case VIA_DI_PORT_LVDS1: + via_lvds1_set_output_format(VGABASE, temp); + break; + case VIA_DI_PORT_LVDS2: + via_lvds2_set_output_format(VGABASE, temp); + break; + case (VIA_DI_PORT_LVDS1 | + VIA_DI_PORT_LVDS2): + via_lvds1_set_output_format(VGABASE, temp); + via_lvds2_set_output_format(VGABASE, temp); + break; + default: + break; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_lvds_dithering(struct via_drm_priv *dev_priv, + u32 di_port, bool dithering) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch(di_port) { + case VIA_DI_PORT_LVDS1: + via_lvds1_set_dithering(VGABASE, dithering); + break; + case VIA_DI_PORT_LVDS2: + via_lvds2_set_dithering(VGABASE, dithering); + break; + case (VIA_DI_PORT_LVDS1 | + VIA_DI_PORT_LVDS2): + via_lvds1_set_dithering(VGABASE, dithering); + via_lvds2_set_dithering(VGABASE, dithering); + break; + default: + break; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +/* + * Sets flat panel display source. + */ +static void via_lvds_display_source(struct via_drm_priv *dev_priv, + u32 di_port, int index) +{ + u8 display_source = index & 0x01; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch(di_port) { + case VIA_DI_PORT_DVP0: + via_dvp0_set_display_source(VGABASE, display_source); + break; + case VIA_DI_PORT_DVP1: + via_dvp1_set_display_source(VGABASE, display_source); + break; + case VIA_DI_PORT_FPDPLOW: + via_fpdp_low_set_display_source(VGABASE, display_source); + via_dvp1_set_display_source(VGABASE, display_source); + break; + case VIA_DI_PORT_FPDPHIGH: + via_fpdp_high_set_display_source(VGABASE, display_source); + via_dvp0_set_display_source(VGABASE, display_source); + break; + case (VIA_DI_PORT_FPDPLOW | + VIA_DI_PORT_FPDPHIGH): + via_fpdp_low_set_display_source(VGABASE, display_source); + via_fpdp_high_set_display_source(VGABASE, display_source); + break; + case VIA_DI_PORT_LVDS1: + via_lvds1_set_display_source(VGABASE, display_source); + break; + case VIA_DI_PORT_LVDS2: + via_lvds2_set_display_source(VGABASE, display_source); + break; + case (VIA_DI_PORT_LVDS1 | + VIA_DI_PORT_LVDS2): + via_lvds1_set_display_source(VGABASE, display_source); + via_lvds2_set_display_source(VGABASE, display_source); + break; + default: + break; + } + + DRM_DEBUG_KMS("FP Display Source: IGA%d\n", + display_source + 1); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_lvds_dpms(struct drm_encoder *encoder, int mode) +{ + struct via_encoder *enc = container_of(encoder, + struct via_encoder, base); + struct drm_device *dev = encoder->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + /* PCI Device ID */ + u16 chipset = pdev->device; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + switch (mode) { + case DRM_MODE_DPMS_ON: + via_lvds_power(dev_priv, chipset, enc->di_port, true); + via_lvds_io_pad_setting(dev_priv, enc->di_port, true); + break; + case DRM_MODE_DPMS_SUSPEND: + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_OFF: + via_lvds_power(dev_priv, chipset, enc->di_port, false); + via_lvds_io_pad_setting(dev_priv, enc->di_port, false); + break; + default: + break; + } + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static bool via_lvds_mode_fixup(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_property *prop = encoder->dev->mode_config.scaling_mode_property; + struct via_crtc *iga = container_of(encoder->crtc, struct via_crtc, base); + struct drm_display_mode *native_mode = NULL, *tmp, *t; + struct drm_connector *connector = NULL, *con; + u64 scale_mode = DRM_MODE_SCALE_CENTER; + struct drm_device *dev = encoder->dev; + + list_for_each_entry(con, &dev->mode_config.connector_list, head) { + if (encoder == con->encoder) { + connector = con; + break; + } + } + + if (!connector) { + DRM_INFO("LVDS encoder is not used by any connector\n"); + return false; + } + + list_for_each_entry_safe(tmp, t, &connector->modes, head) { + if (tmp->type & (DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER)) { + native_mode = tmp; + break; + } + } + + if (!native_mode) { + DRM_INFO("No native mode for LVDS\n"); + return false; + } + + drm_object_property_get_value(&connector->base, prop, &scale_mode); + + if ((mode->hdisplay != native_mode->hdisplay) || + (mode->vdisplay != native_mode->vdisplay)) { + if (scale_mode == DRM_MODE_SCALE_NONE) + return false; + drm_mode_copy(adjusted_mode, native_mode); + } + drm_mode_set_crtcinfo(adjusted_mode, 0); + + iga->scaling_mode = VIA_NO_SCALING; + /* Take care of 410 downscaling */ + if ((mode->hdisplay > native_mode->hdisplay) || + (mode->vdisplay > native_mode->vdisplay)) { + iga->scaling_mode = VIA_SHRINK; + } else { + if (!iga->index || scale_mode == DRM_MODE_SCALE_CENTER) { + /* Do centering according to mode and adjusted_mode */ + via_centering_timing(mode, adjusted_mode); + } else { + if (mode->hdisplay < native_mode->hdisplay) + iga->scaling_mode |= VIA_HOR_EXPAND; + if (mode->vdisplay < native_mode->vdisplay) + iga->scaling_mode |= VIA_VER_EXPAND; + } + } + return true; +} + +static void via_lvds_prepare(struct drm_encoder *encoder) +{ + struct via_encoder *enc = container_of(encoder, + struct via_encoder, base); + struct drm_device *dev = encoder->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + /* PCI Device ID */ + u16 chipset = pdev->device; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + via_lvds_power(dev_priv, chipset, enc->di_port, false); + via_lvds_io_pad_setting(dev_priv, enc->di_port, false); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_lvds_commit(struct drm_encoder *encoder) +{ + struct via_encoder *enc = container_of(encoder, + struct via_encoder, base); + struct drm_device *dev = encoder->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + /* PCI Device ID */ + u16 chipset = pdev->device; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + via_lvds_power(dev_priv, chipset, enc->di_port, true); + via_lvds_io_pad_setting(dev_priv, enc->di_port, true); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void +via_lvds_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct via_crtc *iga = container_of(encoder->crtc, struct via_crtc, base); + struct via_encoder *enc = container_of(encoder, struct via_encoder, base); + struct drm_device *dev = encoder->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + /* PCI Device ID */ + u16 chipset = pdev->device; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* Temporary implementation.*/ + switch (chipset) { + case PCI_DEVICE_ID_VIA_P4M900: + via_fpdp_low_set_adjustment(VGABASE, 0x08); + break; + default: + break; + } + + switch (chipset) { + case PCI_DEVICE_ID_VIA_VT3157: + case PCI_DEVICE_ID_VIA_VT1122: + case PCI_DEVICE_ID_VIA_VX875: + case PCI_DEVICE_ID_VIA_VX900_VGA: + /* OPENLDI Mode */ + via_lvds_format(dev_priv, enc->di_port, 0x01); + + /* Sequential Mode */ + via_lvds_output_format(dev_priv, enc->di_port, 0x01); + + /* Turn on dithering. */ + via_lvds_dithering(dev_priv, enc->di_port, true); + break; + default: + break; + } + + via_lvds_display_source(dev_priv, enc->di_port, iga->index); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static void via_lvds_disable(struct drm_encoder *encoder) +{ + struct via_encoder *enc = container_of(encoder, + struct via_encoder, base); + struct drm_device *dev = encoder->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + + /* PCI Device ID */ + u16 chipset = pdev->device; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + via_lvds_power(dev_priv, chipset, enc->di_port, false); + via_lvds_io_pad_setting(dev_priv, enc->di_port, false); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +const struct drm_encoder_helper_funcs via_lvds_helper_funcs = { + .dpms = via_lvds_dpms, + .prepare = via_lvds_prepare, + .commit = via_lvds_commit, + .mode_set = via_lvds_mode_set, + .disable = via_lvds_disable, +}; + +const struct drm_encoder_funcs via_lvds_enc_funcs = { + .destroy = via_encoder_cleanup, +}; + +/* Detect FP presence. */ +static enum drm_connector_status +via_lvds_detect(struct drm_connector *connector, bool force) +{ + struct drm_device *dev = connector->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_connector *con = container_of(connector, + struct via_connector, base); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + enum drm_connector_status ret = connector_status_disconnected; + struct i2c_adapter *i2c_bus; + struct edid *edid = NULL; + u8 mask; + uint32_t i, i2c_bus_bit; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if (machine_is_olpc()) { + ret = connector_status_connected; + goto exit; + } + + i2c_bus_bit = VIA_I2C_BUS2; + for (i = 0; i < 2; i++) { + if (con->i2c_bus & i2c_bus_bit) { + if (i2c_bus_bit & VIA_I2C_BUS2) { + i2c_bus = via_find_ddc_bus(0x31); + } else if (i2c_bus_bit & VIA_I2C_BUS3) { + i2c_bus = via_find_ddc_bus(0x2c); + } else { + i2c_bus = NULL; + i2c_bus_bit = i2c_bus_bit << 1; + continue; + } + } else { + i2c_bus = NULL; + i2c_bus_bit = i2c_bus_bit << 1; + continue; + } + + if (!via_fp_probe_edid(i2c_bus)) { + i2c_bus_bit = i2c_bus_bit << 1; + continue; + } + + edid = drm_get_edid(&con->base, i2c_bus); + if (edid) { + if (edid->input & DRM_EDID_INPUT_DIGITAL) { + ret = connector_status_connected; + kfree(edid); + DRM_DEBUG_KMS("FP detected.\n"); + DRM_DEBUG_KMS("i2c_bus_bit: %x\n", i2c_bus_bit); + goto exit; + } else { + kfree(edid); + } + } + + i2c_bus_bit = i2c_bus_bit << 1; + } + + if (pdev->device == PCI_DEVICE_ID_VIA_CLE266) { + mask = BIT(3); + } else { + mask = BIT(1); + } + + if (vga_rcrt(VGABASE, 0x3B) & mask) { + ret = connector_status_connected; + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +static int via_lvds_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t val) +{ + struct drm_device *dev = connector->dev; + uint64_t orig; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + ret = drm_object_property_get_value(&connector->base, property, &orig); + if (ret) { + DRM_ERROR("FP Property not found!\n"); + ret = -EINVAL; + goto exit; + } + + if (orig != val) { + if (property == dev->mode_config.scaling_mode_property) { + switch (val) { + case DRM_MODE_SCALE_NONE: + break; + case DRM_MODE_SCALE_CENTER: + break; + case DRM_MODE_SCALE_ASPECT: + break; + case DRM_MODE_SCALE_FULLSCREEN: + break; + default: + DRM_ERROR("Invalid FP property!\n"); + ret = -EINVAL; + break; + } + } + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +struct drm_connector_funcs via_lvds_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = via_lvds_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = via_connector_destroy, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = + drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = + drm_atomic_helper_connector_destroy_state, +}; + +static int +via_lvds_get_modes(struct drm_connector *connector) +{ + struct via_connector *con = container_of(connector, struct via_connector, base); + struct drm_device *dev = connector->dev; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct i2c_adapter *i2c_bus; + struct edid *edid = NULL; + struct drm_display_mode *native_mode = NULL; + u8 reg_value; + int hdisplay, vdisplay; + int count = 0; + uint32_t i, i2c_bus_bit; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* OLPC is very special */ + if (machine_is_olpc()) { + native_mode = drm_mode_create(dev); + + native_mode->clock = 56519; + native_mode->hdisplay = 1200; + native_mode->hsync_start = 1211; + native_mode->hsync_end = 1243; + native_mode->htotal = 1264; + native_mode->hskew = 0; + native_mode->vdisplay = 900; + native_mode->vsync_start = 901; + native_mode->vsync_end = 911; + native_mode->vtotal = 912; + native_mode->vscan = 0; + + native_mode->type = DRM_MODE_TYPE_PREFERRED | + DRM_MODE_TYPE_DRIVER; + drm_mode_set_name(native_mode); + drm_mode_probed_add(connector, native_mode); + count = 1; + goto exit; + } + + i2c_bus_bit = VIA_I2C_BUS2; + for (i = 0; i < 2; i++) { + if (con->i2c_bus & i2c_bus_bit) { + if (i2c_bus_bit & VIA_I2C_BUS2) { + i2c_bus = via_find_ddc_bus(0x31); + } else if (i2c_bus_bit & VIA_I2C_BUS3) { + i2c_bus = via_find_ddc_bus(0x2c); + } else { + i2c_bus = NULL; + i2c_bus_bit = i2c_bus_bit << 1; + continue; + } + } else { + i2c_bus = NULL; + i2c_bus_bit = i2c_bus_bit << 1; + continue; + } + + edid = drm_get_edid(&con->base, i2c_bus); + if (edid) { + if (edid->input & DRM_EDID_INPUT_DIGITAL) { + drm_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + kfree(edid); + DRM_DEBUG_KMS("FP EDID information was obtained.\n"); + DRM_DEBUG_KMS("i2c_bus_bit: %x\n", i2c_bus_bit); + break; + } else { + kfree(edid); + } + } + + i2c_bus_bit = i2c_bus_bit << 1; + } + + reg_value = (vga_rcrt(VGABASE, 0x3f) & 0x0f); + hdisplay = vdisplay = 0; + hdisplay = via_lvds_info_table[reg_value].x; + vdisplay = via_lvds_info_table[reg_value].y; + + if (hdisplay && vdisplay) { + native_mode = drm_cvt_mode(dev, hdisplay, vdisplay, + 60, false, false, false); + } + + if (native_mode) { + native_mode->type = DRM_MODE_TYPE_PREFERRED | + DRM_MODE_TYPE_DRIVER; + drm_mode_set_name(native_mode); + drm_mode_probed_add(connector, native_mode); + count = 1; + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return count; +} + +static int via_lvds_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct drm_property *prop = connector->dev->mode_config.scaling_mode_property; + struct drm_display_mode *native_mode = NULL, *tmp, *t; + struct drm_device *dev = connector->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + u64 scale_mode = DRM_MODE_SCALE_CENTER; + + list_for_each_entry_safe(tmp, t, &connector->modes, head) { + if (tmp->type & (DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER)) { + native_mode = tmp; + break; + } + } + + drm_object_property_get_value(&connector->base, prop, &scale_mode); + + if ((scale_mode == DRM_MODE_SCALE_NONE) && + ((mode->hdisplay != native_mode->hdisplay) || + (mode->vdisplay != native_mode->vdisplay))) + return MODE_PANEL; + + /* Don't support mode larger than physical size */ + if (pdev->device != PCI_DEVICE_ID_VIA_VX900_VGA) { + if (mode->hdisplay > native_mode->hdisplay) + return MODE_PANEL; + if (mode->vdisplay > native_mode->vdisplay) + return MODE_PANEL; + } else { + /* HW limitation 410 only can + * do <= 1.33 scaling */ + if (mode->hdisplay * 100 > native_mode->hdisplay * 133) + return MODE_PANEL; + if (mode->vdisplay * 100 > native_mode->vdisplay * 133) + return MODE_PANEL; + + /* Now we can not support H V different scale */ + if ((mode->hdisplay > native_mode->hdisplay) && + (mode->vdisplay < native_mode->vdisplay)) + return MODE_PANEL; + + if ((mode->hdisplay < native_mode->hdisplay) && + (mode->vdisplay > native_mode->vdisplay)) + return MODE_PANEL; + } + return MODE_OK; +} + +struct drm_connector_helper_funcs via_lvds_connector_helper_funcs = { + .get_modes = via_lvds_get_modes, +}; + +/* + * Probe (pre-initialization detection) FP. + */ +void via_lvds_probe(struct drm_device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct drm_connector connector; + struct i2c_adapter *i2c_bus; + struct edid *edid; + u16 chipset = pdev->device; + u8 sr12, sr13, sr5a; + u8 cr3b; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + sr12 = vga_rseq(VGABASE, 0x12); + sr13 = vga_rseq(VGABASE, 0x13); + cr3b = vga_rcrt(VGABASE, 0x3b); + + DRM_DEBUG_KMS("chipset: 0x%04x\n", chipset); + DRM_DEBUG_KMS("sr12: 0x%02x\n", sr12); + DRM_DEBUG_KMS("sr13: 0x%02x\n", sr13); + DRM_DEBUG_KMS("cr3b: 0x%02x\n", cr3b); + + /* Detect the presence of FPs. */ + switch (chipset) { + case PCI_DEVICE_ID_VIA_CLE266: + if ((sr12 & BIT(4)) || (cr3b & BIT(3))) { + dev_priv->int_fp1_presence = true; + dev_priv->int_fp1_di_port = VIA_DI_PORT_DIP0; + } else { + dev_priv->int_fp1_presence = false; + dev_priv->int_fp1_di_port = VIA_DI_PORT_NONE; + } + + dev_priv->int_fp2_presence = false; + dev_priv->int_fp2_di_port = VIA_DI_PORT_NONE; + break; + case PCI_DEVICE_ID_VIA_KM400: + case PCI_DEVICE_ID_VIA_CN700: + case PCI_DEVICE_ID_VIA_PM800: + case PCI_DEVICE_ID_VIA_K8M800: + /* 3C5.13[3] - DVP0D8 pin strapping + * 0: AGP pins are used for AGP + * 1: AGP pins are used by FPDP + * (Flat Panel Display Port) */ + if ((sr13 & BIT(3)) && (cr3b & BIT(1))) { + dev_priv->int_fp1_presence = true; + dev_priv->int_fp1_di_port = VIA_DI_PORT_FPDPHIGH | + VIA_DI_PORT_FPDPLOW; + } else { + dev_priv->int_fp1_presence = false; + dev_priv->int_fp1_di_port = VIA_DI_PORT_NONE; + } + + dev_priv->int_fp2_presence = false; + dev_priv->int_fp2_di_port = VIA_DI_PORT_NONE; + break; + case PCI_DEVICE_ID_VIA_VT3343: + case PCI_DEVICE_ID_VIA_K8M890: + case PCI_DEVICE_ID_VIA_P4M900: + if (cr3b & BIT(1)) { + /* 3C5.12[4] - DVP0D4 pin strapping + * 0: 12-bit FPDP (Flat Panel + * Display Port) + * 1: 24-bit FPDP (Flat Panel + * Display Port) */ + if (sr12 & BIT(4)) { + dev_priv->int_fp1_presence = true; + dev_priv->int_fp1_di_port = VIA_DI_PORT_FPDPLOW | + VIA_DI_PORT_FPDPHIGH; + } else { + dev_priv->int_fp1_presence = true; + dev_priv->int_fp1_di_port = + VIA_DI_PORT_FPDPLOW; + } + } else { + dev_priv->int_fp1_presence = false; + dev_priv->int_fp1_di_port = VIA_DI_PORT_NONE; + } + + dev_priv->int_fp2_presence = false; + dev_priv->int_fp2_di_port = VIA_DI_PORT_NONE; + break; + case PCI_DEVICE_ID_VIA_VT3157: + case PCI_DEVICE_ID_VIA_VT1122: + case PCI_DEVICE_ID_VIA_VX875: + case PCI_DEVICE_ID_VIA_VX900_VGA: + /* Save SR5A. */ + sr5a = vga_rseq(VGABASE, 0x5a); + + DRM_DEBUG_KMS("sr5a: 0x%02x\n", sr5a); + + /* Set SR5A[0] to 1. + * This allows the read out of the alternative + * pin strapping settings from SR12 and SR13. */ + svga_wseq_mask(VGABASE, 0x5a, BIT(0), BIT(0)); + + sr13 = vga_rseq(VGABASE, 0x13); + if (cr3b & BIT(1)) { + if (dev_priv->is_via_nanobook) { + dev_priv->int_fp1_presence = false; + dev_priv->int_fp1_di_port = VIA_DI_PORT_NONE; + dev_priv->int_fp2_presence = true; + dev_priv->int_fp2_di_port = VIA_DI_PORT_LVDS2; + } else if (dev_priv->is_quanta_il1) { + /* From the Quanta IL1 schematic. */ + dev_priv->int_fp1_presence = true; + dev_priv->int_fp1_di_port = VIA_DI_PORT_DVP1; + dev_priv->int_fp2_presence = false; + dev_priv->int_fp2_di_port = VIA_DI_PORT_NONE; + + } else if (dev_priv->is_samsung_nc20) { + dev_priv->int_fp1_presence = false; + dev_priv->int_fp1_di_port = VIA_DI_PORT_NONE; + dev_priv->int_fp2_presence = true; + dev_priv->int_fp2_di_port = VIA_DI_PORT_LVDS2; + + /* 3C5.13[7:6] - Integrated LVDS / DVI + * Mode Select (DVP1D15-14 pin + * strapping) + * 00: LVDS1 + LVDS2 + * 01: DVI + LVDS2 + * 10: Dual LVDS Channel + * (High Resolution Panel) + * 11: One DVI only (decrease + * the clock jitter) */ + } else if ((!(sr13 & BIT(7))) && + (!(sr13 & BIT(6)))) { + dev_priv->int_fp1_presence = true; + dev_priv->int_fp1_di_port = VIA_DI_PORT_LVDS1; + + /* + * For now, don't support the second + * FP. + */ + dev_priv->int_fp2_presence = false; + dev_priv->int_fp2_di_port = VIA_DI_PORT_NONE; + } else if ((!(sr13 & BIT(7))) && + (sr13 & BIT(6))) { + dev_priv->int_fp1_presence = false; + dev_priv->int_fp1_di_port = VIA_DI_PORT_NONE; + dev_priv->int_fp2_presence = true; + dev_priv->int_fp2_di_port = VIA_DI_PORT_LVDS2; + } else if ((sr13 & BIT(7)) && + (!(sr13 & BIT(6)))) { + dev_priv->int_fp1_presence = true; + dev_priv->int_fp1_di_port = VIA_DI_PORT_LVDS1 | + VIA_DI_PORT_LVDS2; + dev_priv->int_fp2_presence = false; + dev_priv->int_fp2_di_port = VIA_DI_PORT_NONE; + } else { + dev_priv->int_fp1_presence = false; + dev_priv->int_fp1_di_port = VIA_DI_PORT_NONE; + dev_priv->int_fp2_presence = false; + dev_priv->int_fp2_di_port = VIA_DI_PORT_NONE; + } + } else { + dev_priv->int_fp1_presence = false; + dev_priv->int_fp1_di_port = VIA_DI_PORT_NONE; + dev_priv->int_fp2_presence = false; + dev_priv->int_fp2_di_port = VIA_DI_PORT_NONE; + } + + /* Restore SR5A. */ + vga_wseq(VGABASE, 0x5a, sr5a); + break; + default: + dev_priv->int_fp1_presence = false; + dev_priv->int_fp1_di_port = VIA_DI_PORT_NONE; + dev_priv->int_fp2_presence = false; + dev_priv->int_fp2_di_port = VIA_DI_PORT_NONE; + break; + } + + dev_priv->int_fp1_i2c_bus = VIA_I2C_NONE; + dev_priv->int_fp2_i2c_bus = VIA_I2C_NONE; + + /* Zero clear connector struct. + * Not doing so leads to a crash. */ + memset(&connector, 0, sizeof(connector)); + + /* Register a connector only for I2C bus probing. */ + drm_connector_init(dev, &connector, &via_lvds_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + drm_connector_helper_add(&connector, + &via_lvds_connector_helper_funcs); + drm_connector_register(&connector); + + if ((dev_priv->int_fp1_presence) + && (!(dev_priv->mapped_i2c_bus & VIA_I2C_BUS2))) { + i2c_bus = via_find_ddc_bus(0x31); + edid = drm_get_edid(&connector, i2c_bus); + if (edid) { + dev_priv->int_fp1_i2c_bus = VIA_I2C_BUS2; + dev_priv->mapped_i2c_bus |= VIA_I2C_BUS2; + kfree(edid); + } + } + + if ((dev_priv->int_fp2_presence) + && (!(dev_priv->mapped_i2c_bus & VIA_I2C_BUS2))) { + i2c_bus = via_find_ddc_bus(0x31); + edid = drm_get_edid(&connector, i2c_bus); + if (edid) { + dev_priv->int_fp2_i2c_bus = VIA_I2C_BUS2; + dev_priv->mapped_i2c_bus |= VIA_I2C_BUS2; + kfree(edid); + } + } + + /* Release the connector resource. */ + drm_connector_unregister(&connector); + drm_connector_cleanup(&connector); + + DRM_DEBUG_KMS("int_fp1_presence: %x\n", + dev_priv->int_fp1_presence); + DRM_DEBUG_KMS("int_fp1_di_port: 0x%08x\n", + dev_priv->int_fp1_di_port); + DRM_DEBUG_KMS("int_fp1_i2c_bus: 0x%08x\n", + dev_priv->int_fp1_i2c_bus); + DRM_DEBUG_KMS("int_fp2_presence: %x\n", + dev_priv->int_fp2_presence); + DRM_DEBUG_KMS("int_fp2_di_port: 0x%08x\n", + dev_priv->int_fp2_di_port); + DRM_DEBUG_KMS("int_fp2_i2c_bus: 0x%08x\n", + dev_priv->int_fp2_i2c_bus); + DRM_DEBUG_KMS("mapped_i2c_bus: 0x%08x\n", + dev_priv->mapped_i2c_bus); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +void via_lvds_init(struct drm_device *dev) +{ + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct via_connector *con; + struct via_encoder *enc; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + if ((!(dev_priv->int_fp1_presence)) && + (!(dev_priv->int_fp2_presence))) { + goto exit; + } + + enc = kzalloc(sizeof(*enc) + sizeof(*con), GFP_KERNEL); + if (!enc) { + DRM_ERROR("Failed to allocate FP.\n"); + goto exit; + } + + con = &enc->cons[0]; + INIT_LIST_HEAD(&con->props); + + drm_connector_init(dev, &con->base, &via_lvds_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + drm_connector_helper_add(&con->base, &via_lvds_connector_helper_funcs); + drm_connector_register(&con->base); + + if (dev_priv->int_fp1_presence) { + con->i2c_bus = dev_priv->int_fp1_i2c_bus; + } else if (dev_priv->int_fp2_presence) { + con->i2c_bus = dev_priv->int_fp2_i2c_bus; + } else { + con->i2c_bus = VIA_I2C_NONE; + } + + con->base.doublescan_allowed = false; + con->base.interlace_allowed = false; + + /* Now setup the encoder */ + drm_encoder_init(dev, &enc->base, &via_lvds_enc_funcs, + DRM_MODE_ENCODER_LVDS, NULL); + drm_encoder_helper_add(&enc->base, &via_lvds_helper_funcs); + + enc->base.possible_crtcs = BIT(1) | BIT(0); + + if (dev_priv->int_fp1_presence) { + enc->di_port = dev_priv->int_fp1_di_port; + } else if (dev_priv->int_fp2_presence) { + enc->di_port = dev_priv->int_fp2_di_port; + } else { + enc->di_port = VIA_DI_PORT_NONE; + } + + /* Put it all together */ + drm_connector_attach_encoder(&con->base, &enc->base); + + /* Init TD timing register (power sequence) */ + via_init_td_timing_regs(dev); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return; +} -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 18/28] drm/via: Add via_object.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (16 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 17/28] drm/via: Add via_lvds.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 20:26 ` [PATCH 19/28] drm/via: Add via_pll.c Kevin Brace ` (2 subsequent siblings) 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_object.c | 324 +++++++++++++++++++++++++++++++ 1 file changed, 324 insertions(+) create mode 100644 drivers/gpu/drm/via/via_object.c diff --git a/drivers/gpu/drm/via/via_object.c b/drivers/gpu/drm/via/via_object.c new file mode 100644 index 000000000000..96fb2934d0de --- /dev/null +++ b/drivers/gpu/drm/via/via_object.c @@ -0,0 +1,324 @@ +/* + * Copyright © 2018-2019 Kevin Brace. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * Kevin Brace <kevinbrace@bracecomputerlab.com> + */ +/* + * via_object.c + * + * Manages Buffer Objects (BO) via TTM. + * Part of the TTM memory allocator. + * + */ + +#include <drm/drm_file.h> +#include <drm/drm_gem.h> +#include <drm/drm_gem_ttm_helper.h> + +#include <drm/ttm/ttm_bo_api.h> +#include <drm/ttm/ttm_bo_driver.h> +#include <drm/ttm/ttm_range_manager.h> + +#include "via_drv.h" + + +static void via_gem_free(struct drm_gem_object *obj) +{ + struct ttm_buffer_object *ttm_bo; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + ttm_bo = container_of(obj, struct ttm_buffer_object, base); + + ttm_bo_put(ttm_bo); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +static const struct vm_operations_struct via_ttm_bo_vm_ops = { + .fault = ttm_bo_vm_fault, + .open = ttm_bo_vm_open, + .close = ttm_bo_vm_close, + .access = ttm_bo_vm_access +}; + +static const struct drm_gem_object_funcs via_gem_object_funcs = { + .free = via_gem_free, + .vmap = drm_gem_ttm_vmap, + .vunmap = drm_gem_ttm_vunmap, + .mmap = drm_gem_ttm_mmap, + .vm_ops = &via_ttm_bo_vm_ops, +}; + +void via_ttm_domain_to_placement(struct via_bo *bo, + uint32_t ttm_domain) +{ + unsigned i = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + bo->placement.placement = bo->placements; + bo->placement.busy_placement = bo->placements; + + if (ttm_domain == TTM_PL_SYSTEM) { + bo->placements[i].fpfn = 0; + bo->placements[i].lpfn = 0; + bo->placements[i].mem_type = TTM_PL_SYSTEM; + bo->placements[i].flags = 0; + i++; + } + + if (ttm_domain == TTM_PL_TT) { + bo->placements[i].fpfn = 0; + bo->placements[i].lpfn = 0; + bo->placements[i].mem_type = TTM_PL_TT; + bo->placements[i].flags = 0; + i++; + } + + if (ttm_domain == TTM_PL_VRAM) { + bo->placements[i].fpfn = 0; + bo->placements[i].lpfn = 0; + bo->placements[i].mem_type = TTM_PL_VRAM; + bo->placements[i].flags = 0; + i++; + } + + bo->placement.num_placement = i; + bo->placement.num_busy_placement = i; + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +void via_ttm_bo_destroy(struct ttm_buffer_object *tbo) +{ + struct via_bo *bo; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + bo = to_ttm_bo(tbo); + + drm_gem_object_release(&tbo->base); + kfree(bo); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +int via_bo_pin(struct via_bo *bo, uint32_t ttm_domain) +{ + struct ttm_buffer_object *ttm_bo; + struct ttm_operation_ctx ctx = {false, false}; + int ret = 0; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + ttm_bo = &bo->ttm_bo; + + if (ttm_bo->pin_count) { + goto pin; + } + + via_ttm_domain_to_placement(bo, ttm_domain); + ret = ttm_bo_validate(ttm_bo, &bo->placement, &ctx); + if (ret) { + goto exit; + } + +pin: + ttm_bo_pin(ttm_bo); +exit: + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +void via_bo_unpin(struct via_bo *bo) +{ + struct ttm_buffer_object *ttm_bo; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + ttm_bo = &bo->ttm_bo; + + ttm_bo_unpin(ttm_bo); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +int via_bo_create(struct drm_device *dev, + struct ttm_device *bdev, + uint64_t size, + enum ttm_bo_type type, + uint32_t ttm_domain, + bool kmap, + struct via_bo **bo_ptr) +{ + struct ttm_buffer_object *ttm_bo; + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + struct via_bo *bo; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + bo = kzalloc(sizeof(*bo), GFP_KERNEL); + if (!bo) { + DRM_ERROR("Cannot allocate a TTM buffer object.\n"); + ret = -ENOMEM; + goto exit; + } + + ttm_bo = &bo->ttm_bo; + + /* + * It is an imperative to page align the requested buffer size + * prior to a memory allocation request, or various memory + * allocation related system instabilities may occur. + */ + size = ALIGN(size, PAGE_SIZE); + + ret = drm_gem_object_init(dev, &ttm_bo->base, size); + if (ret) { + DRM_ERROR("Cannot initialize a GEM object.\n"); + goto error; + } + + ttm_bo->base.funcs = &via_gem_object_funcs; + + via_ttm_domain_to_placement(bo, ttm_domain); + ret = ttm_bo_init(&dev_priv->bdev, ttm_bo, + size, type, &bo->placement, + PAGE_SIZE >> PAGE_SHIFT, false, + NULL, NULL, via_ttm_bo_destroy); + if (ret) { + DRM_ERROR("Cannot initialize a TTM object.\n"); + goto exit; + } + + if (kmap) { + ret = ttm_bo_reserve(ttm_bo, true, false, NULL); + if (ret) { + ttm_bo_put(ttm_bo); + goto exit; + } + + ret = via_bo_pin(bo, ttm_domain); + ttm_bo_unreserve(ttm_bo); + if (ret) { + ttm_bo_put(ttm_bo); + goto exit; + } + + ret = ttm_bo_kmap(ttm_bo, 0, ttm_bo->resource->num_pages, + &bo->kmap); + if (ret) { + ttm_bo_put(ttm_bo); + goto exit; + } + } + + *bo_ptr = bo; + goto exit; +error: + kfree(bo); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +void via_bo_destroy(struct via_bo *bo, bool kmap) +{ + struct ttm_buffer_object *ttm_bo; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + ttm_bo = &bo->ttm_bo; + + if (kmap) { + ttm_bo_kunmap(&bo->kmap); + + ret = ttm_bo_reserve(ttm_bo, true, false, NULL); + if (ret) { + goto exit; + } + + via_bo_unpin(bo); + ttm_bo_unreserve(ttm_bo); + if (ret) { + goto exit; + } + } + + ttm_bo_put(ttm_bo); +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} + +int via_mm_init(struct via_drm_priv *dev_priv) +{ + struct drm_device *dev = &dev_priv->dev; + int ret; + + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + /* + * Initialize bdev ttm_bo_device struct. + */ + ret = ttm_device_init(&dev_priv->bdev, + &via_bo_driver, + dev->dev, + dev->anon_inode->i_mapping, + dev->vma_offset_manager, + false, + dev_priv->need_dma32); + if (ret) { + DRM_ERROR("Failed initializing buffer object driver.\n"); + goto exit; + } + + /* + * Initialize TTM range manager for VRAM management. + */ + ret = ttm_range_man_init(&dev_priv->bdev, TTM_PL_VRAM, + false, + dev_priv->vram_size >> PAGE_SHIFT); + if (ret) { + DRM_ERROR("Failed initializing TTM VRAM memory manager.\n"); + goto exit; + } + +exit: + DRM_DEBUG_KMS("Exiting %s.\n", __func__); + return ret; +} + +void via_mm_fini(struct via_drm_priv *dev_priv) +{ + DRM_DEBUG_KMS("Entered %s.\n", __func__); + + ttm_range_man_fini(&dev_priv->bdev, TTM_PL_VRAM); + + ttm_device_fini(&dev_priv->bdev); + + DRM_DEBUG_KMS("Exiting %s.\n", __func__); +} -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 19/28] drm/via: Add via_pll.c 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (17 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 18/28] drm/via: Add via_object.c Kevin Brace @ 2022-06-24 20:26 ` Kevin Brace 2022-06-24 21:15 ` [PATCH 00/28] OpenChrome DRM for Linux 5.20 Sam Ravnborg 2022-06-27 7:37 ` Thomas Zimmermann 20 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 20:26 UTC (permalink / raw) To: dri-devel; +Cc: Kevin Brace From: Kevin Brace <kevinbrace@bracecomputerlab.com> Signed-off-by: Kevin Brace <kevinbrace@bracecomputerlab.com> --- drivers/gpu/drm/via/via_pll.c | 263 ++++++++++++++++++++++++++++++++++ 1 file changed, 263 insertions(+) create mode 100644 drivers/gpu/drm/via/via_pll.c diff --git a/drivers/gpu/drm/via/via_pll.c b/drivers/gpu/drm/via/via_pll.c new file mode 100644 index 000000000000..ec61d044504d --- /dev/null +++ b/drivers/gpu/drm/via/via_pll.c @@ -0,0 +1,263 @@ +/* + * Copyright 2012 James Simmons. All Rights Reserved. + * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2009 S3 Graphics, Inc. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Author(s): + * James Simmons <jsimmons@infradead.org> + */ + +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> + +#include "via_drv.h" + + +#define CSR_VCO_UP 600000000 +#define CSR_VCO_DOWN 300000000 + +#define PLL_DTZ_DEFAULT (BIT(0) | BIT(1)) + +#define VIA_CLK_REFERENCE 14318180 + +struct pll_mrn_value { + u32 pll_m; + u32 pll_r; + u32 pll_n; + u32 diff_clk; + u32 pll_fout; +}; + +/* + * This function first gets the best frequency M, R, N value + * to program the PLL according to the supplied frequence + * passed in. After we get the MRN values the results are + * formatted to fit properly into the PLL clock registers. + * + * PLL registers M, R, N value + * [31:16] DM[7:0] + * [15:8 ] DR[2:0] + * [7 :0 ] DN[6:0] + */ +u32 via_get_clk_value(struct drm_device *dev, u32 freq) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + u32 best_pll_n = 2, best_pll_r = 0, best_pll_m = 2, best_clk_diff = freq; + u32 pll_fout, pll_fvco, pll_mrn = 0; + u32 pll_n, pll_r, pll_m, clk_diff; + struct pll_mrn_value pll_tmp[5] = { + { 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0 } }; + int count; + + if ((pdev->device != PCI_DEVICE_ID_VIA_CLE266) && + (pdev->device != PCI_DEVICE_ID_VIA_KM400)) { + /* DN[6:0] */ + for (pll_n = 2; pll_n < 6; pll_n++) { + /* DR[2:0] */ + for (pll_r = 0; pll_r < 6; pll_r++) { + /* DM[9:0] */ + for (pll_m = 2; pll_m < 512; pll_m++) { + /* first divide pll_n then multiply + * pll_m. We have to reduce pll_m + * to 512 to get rid of the overflow */ + pll_fvco = (VIA_CLK_REFERENCE / pll_n) * pll_m; + if ((pll_fvco >= CSR_VCO_DOWN) && (pll_fvco <= CSR_VCO_UP)) { + pll_fout = pll_fvco >> pll_r; + if (pll_fout < freq) + clk_diff = freq - pll_fout; + else + clk_diff = pll_fout - freq; + + /* if frequency (which is the PLL we want + * to set) > 150MHz, the MRN value we + * write in register must < frequency, and + * get MRN value whose M is the largeset */ + if (freq >= 150000000) { + if ((clk_diff <= pll_tmp[0].diff_clk) || pll_tmp[0].pll_fout == 0) { + for (count = ARRAY_SIZE(pll_tmp) - 1; count >= 1; count--) + pll_tmp[count] = pll_tmp[count - 1]; + + pll_tmp[0].pll_m = pll_m; + pll_tmp[0].pll_r = pll_r; + pll_tmp[0].pll_n = pll_n; + pll_tmp[0].diff_clk = clk_diff; + pll_tmp[0].pll_fout = pll_fout; + } + } + + if (clk_diff < best_clk_diff) { + best_clk_diff = clk_diff; + best_pll_m = pll_m; + best_pll_n = pll_n; + best_pll_r = pll_r; + } + } /* if pll_fvco in VCO range */ + } /* for PLL M */ + } /* for PLL R */ + } /* for PLL N */ + + /* if frequency(which is the PLL we want to set) > 150MHz, + * the MRN value we write in register must < frequency, + * and get MRN value whose M is the largeset */ + if (freq > 150000000) { + best_pll_m = pll_tmp[0].pll_m; + best_pll_r = pll_tmp[0].pll_r; + best_pll_n = pll_tmp[0].pll_n; + } + /* UniChrome IGP (CLE266, KM400(A), KN400, and P4M800 chipsets) + * requires a different formula for calculating the PLL parameters. + * The code was borrowed from OpenChrome DDX device driver UMS + * (User Mode Setting) section, but was modified to not use float type + * variables. */ + } else { + for (pll_r = 0; pll_r < 4; ++pll_r) { + for (pll_n = (pll_r == 0) ? 2 : 1; pll_n <= 7; ++pll_n) { + for (pll_m = 1; pll_m <= 127; ++pll_m) { + pll_fout = VIA_CLK_REFERENCE * pll_m; + pll_fout /= (pll_n << pll_r); + if (pll_fout < freq) + clk_diff = freq - pll_fout; + else + clk_diff = pll_fout - freq; + + if (clk_diff < best_clk_diff) { + best_clk_diff = clk_diff; + best_pll_m = pll_m & 0x7F; + best_pll_n = pll_n & 0x1F; + best_pll_r = pll_r & 0x03; + } + } + } + } + } + + switch (pdev->device) { + case PCI_DEVICE_ID_VIA_CLE266: + case PCI_DEVICE_ID_VIA_KM400: + /* Clock Synthesizer Value 0[7:6]: DR[1:0] + * Clock Synthesizer Value 0[5:0]: DN[5:0] */ + pll_mrn = ((best_pll_r & 0x3) << 14 | + (best_pll_n & 0x1F) << 8); + /* Clock Synthesizer Value 1[6:0]: DM[6:0] */ + pll_mrn |= (best_pll_m & 0x7F); + break; + case PCI_DEVICE_ID_VIA_VX875: + case PCI_DEVICE_ID_VIA_VX900_VGA: + /* Clock Synthesizer Value 0 : DM[7:0] */ + pll_mrn = (best_pll_m & 0xFF) << 16; + /* Clock Synthesizer Value 1[1:0] : DM[9:8] + * Clock Synthesizer Value 1[4:2] : DR[2:0] + * Clock Synthesizer Value 1[7] : DTZ[0] */ + pll_mrn |= (((PLL_DTZ_DEFAULT & 0x1) << 7) | + ((best_pll_r & 0x7) << 2) | + (((best_pll_m) >> 8) & 0x3)) << 8; + /* Clock Synthesizer Value 2[6:0] : DN[6:0] + * Clock Synthesizer Value 2[7] : DTZ[1] */ + pll_mrn |= (((PLL_DTZ_DEFAULT >> 1) & 0x1) << 7) | + ((best_pll_n) & 0x7F); + break; + default: + /* Clock Synthesizer Value 0 : DM[7:0] */ + pll_mrn = ((best_pll_m - 2) & 0xFF) << 16; + /* Clock Synthesizer Value 1[1:0] : DM[9:8] + * Clock Synthesizer Value 1[4:2] : DR[2:0] + * Clock Synthesizer Value 1[7] : DTZ[0] */ + pll_mrn |= (((PLL_DTZ_DEFAULT & 0x1) << 7) | + ((best_pll_r & 0x7) << 2) | + (((best_pll_m - 2) >> 8) & 0x3)) << 8; + /* Clock Synthesizer Value 2[6:0] : DN[6:0] + * Clock Synthesizer Value 2[7] : DTZ[1] */ + pll_mrn |= (((PLL_DTZ_DEFAULT >> 1) & 0x1) << 7) | + ((best_pll_n - 2) & 0x7F); + break; + } + return pll_mrn; +} + +/* Set VCLK */ +void via_set_vclock(struct drm_crtc *crtc, u32 clk) +{ + struct via_crtc *iga = container_of(crtc, struct via_crtc, base); + struct drm_device *dev = crtc->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + struct via_drm_priv *dev_priv = to_via_drm_priv(dev); + unsigned long max_loop = 50, i = 0; + + if (!iga->index) { + /* IGA1 HW Reset Enable */ + svga_wcrt_mask(VGABASE, 0x17, 0x00, BIT(7)); + + /* set clk */ + if ((pdev->device == PCI_DEVICE_ID_VIA_CLE266) || + (pdev->device == PCI_DEVICE_ID_VIA_KM400)) { + vga_wseq(VGABASE, 0x46, (clk & 0xFF00) >> 8); /* rshift + divisor */ + vga_wseq(VGABASE, 0x47, (clk & 0x00FF)); /* multiplier */ + } else { + vga_wseq(VGABASE, 0x44, (clk & 0xFF0000) >> 16); + vga_wseq(VGABASE, 0x45, (clk & 0x00FF00) >> 8); + vga_wseq(VGABASE, 0x46, (clk & 0x0000FF)); + } + /* Fire */ + svga_wmisc_mask(VGABASE, BIT(3) | BIT(2), BIT(3) | BIT(2)); + + /* reset pll */ + svga_wseq_mask(VGABASE, 0x40, 0x02, 0x02); + svga_wseq_mask(VGABASE, 0x40, 0x00, 0x02); + + /* exit hw reset */ + while ((vga_rseq(VGABASE, 0x3C) & BIT(3)) == 0 && i++ < max_loop) + udelay(20); + + /* IGA1 HW Reset Disable */ + svga_wcrt_mask(VGABASE, 0x17, BIT(7), BIT(7)); + } else { + /* IGA2 HW Reset Enable */ + svga_wcrt_mask(VGABASE, 0x6A, 0x00, BIT(6)); + + /* set clk */ + if ((pdev->device == PCI_DEVICE_ID_VIA_CLE266) || + (pdev->device == PCI_DEVICE_ID_VIA_KM400)) { + vga_wseq(VGABASE, 0x44, (clk & 0xFF00) >> 8); + vga_wseq(VGABASE, 0x45, (clk & 0x00FF)); + } else { + vga_wseq(VGABASE, 0x4A, (clk & 0xFF0000) >> 16); + vga_wseq(VGABASE, 0x4B, (clk & 0x00FF00) >> 8); + vga_wseq(VGABASE, 0x4C, (clk & 0x0000FF)); + } + + /* reset pll */ + svga_wseq_mask(VGABASE, 0x40, 0x04, 0x04); + svga_wseq_mask(VGABASE, 0x40, 0x00, 0x04); + + /* exit hw reset */ + while ((vga_rseq(VGABASE, 0x3C) & BIT(2)) == 0 && i++ < max_loop) + udelay(20); + + /* IGA2 HW Reset Disble, CR6A[6] = 1 */ + svga_wcrt_mask(VGABASE, 0x6A, BIT(6), BIT(6)); + } +} -- 2.35.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [PATCH 00/28] OpenChrome DRM for Linux 5.20 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (18 preceding siblings ...) 2022-06-24 20:26 ` [PATCH 19/28] drm/via: Add via_pll.c Kevin Brace @ 2022-06-24 21:15 ` Sam Ravnborg 2022-06-24 23:14 ` Kevin Brace 2022-06-27 7:37 ` Thomas Zimmermann 20 siblings, 1 reply; 34+ messages in thread From: Sam Ravnborg @ 2022-06-24 21:15 UTC (permalink / raw) To: Kevin Brace; +Cc: Kevin Brace, dri-devel Hi Kevin, On Fri, Jun 24, 2022 at 03:26:05PM -0500, Kevin Brace wrote: > From: Kevin Brace <kevinbrace@bracecomputerlab.com> > > Hi Dave and Daniel, > > This is my first attempt (this is not a RFC posting) in trying to get > OpenChrome DRM pulled in for Linux 5.20. I tried to apply the patches one-by-one but they fail as they assume all old via files are gone. Please fix v2 so all patches apply clean to the chosen base. There is no need for a respin now, give people a bit time to look at the patches first. At least unless someone else needs it. Sam ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 00/28] OpenChrome DRM for Linux 5.20 2022-06-24 21:15 ` [PATCH 00/28] OpenChrome DRM for Linux 5.20 Sam Ravnborg @ 2022-06-24 23:14 ` Kevin Brace 0 siblings, 0 replies; 34+ messages in thread From: Kevin Brace @ 2022-06-24 23:14 UTC (permalink / raw) To: Sam Ravnborg; +Cc: dri-devel Hi Sam, Oh, sorry that I assumed drivers/gpu/drm/via/ is completely cleared out. The problem is, I used drm-openchrome repository (customized drm-next branch for OpenChrome DRM development) to generate the patches. I happened not to have the original DRM maintainers version installed on my regular development system. As of now, I am downloading it onto my development system. I will have a few patches to supplement the patches I posted ready in about 2 hours per your suggestion. Regards, Kevin Brace Brace Computer Laboratory blog https://bracecomputerlab.com > Sent: Friday, June 24, 2022 at 4:15 PM > From: "Sam Ravnborg" <sam@ravnborg.org> > To: "Kevin Brace" <kevinbrace@gmx.com> > Cc: dri-devel@lists.freedesktop.org, "Kevin Brace" <kevinbrace@bracecomputerlab.com> > Subject: Re: [PATCH 00/28] OpenChrome DRM for Linux 5.20 > > Hi Kevin, > > On Fri, Jun 24, 2022 at 03:26:05PM -0500, Kevin Brace wrote: > > From: Kevin Brace <kevinbrace@bracecomputerlab.com> > > > > Hi Dave and Daniel, > > > > This is my first attempt (this is not a RFC posting) in trying to get > > OpenChrome DRM pulled in for Linux 5.20. > > I tried to apply the patches one-by-one but they fail as they assume all > old via files are gone. Please fix v2 so all patches apply clean to the > chosen base. > > There is no need for a respin now, give people a bit time to look at the > patches first. At least unless someone else needs it. > > Sam > ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 00/28] OpenChrome DRM for Linux 5.20 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace ` (19 preceding siblings ...) 2022-06-24 21:15 ` [PATCH 00/28] OpenChrome DRM for Linux 5.20 Sam Ravnborg @ 2022-06-27 7:37 ` Thomas Zimmermann 2022-06-27 21:32 ` Sam Ravnborg 20 siblings, 1 reply; 34+ messages in thread From: Thomas Zimmermann @ 2022-06-27 7:37 UTC (permalink / raw) To: Kevin Brace, dri-devel; +Cc: Kevin Brace [-- Attachment #1.1: Type: text/plain, Size: 11594 bytes --] Hi Kevin Am 24.06.22 um 22:26 schrieb Kevin Brace: > From: Kevin Brace <kevinbrace@bracecomputerlab.com> > > Hi Dave and Daniel, > > This is my first attempt (this is not a RFC posting) in trying to get > OpenChrome DRM pulled in for Linux 5.20. First of all, thank you so much for working on this. > I started to work on this seriously around the summer of 2017, so it has > been a long journey. > I know that the code is not quite perfect, but I have done as much work > as I can do on my own, and I now think that I should post the code on > dri-devel mailing list for other people to take a look at it. I had a brief look over the patches. Even though the code looks fairly rough in places, I think we should get this driver merged ASAP. Once merged, cleanups become *a lot* easier. > Whether or not the code itself works or not, no, OpenChrome DRM is not > some vaporware, and the code reliability is comparable to the existing > OpenChrome DDX UMS code path. > The code reliability is more than good enough to the point where I utilize > the module almost every time I work on developing the code. > I am aware that the hardware (silicon) is quite old by today's standards, > so not too many people "still" (the word one open source software focused > journalist often uses to describe greater than 5 year old computer > hardware) own the VIA silicon hardware to actually test the code > themselves. I wanted to test the patches (with that other additional patch), but they don't build with the current DRM development tree. > The current code is developed against drm-next branch > drm-next-2022-06-03-1 tag. This will go through drm-misc-next, presumably. You need to rebase on top of that branch. Please don't merge but rebase, so that you actually have all required changes in the next patchset. I've found that at least DRM's Kconfig file misses a change and that <linux/pci_ids.h> doesn't contain all necessary PCI ids. This should be the next step. > The current iteration of the code has no support for acceleration. > It is currently a mode setting only DRM module. > Even if the code is pulled into the Linux kernel tree, I will consider > the code experimental until at least 2D acceleration is implemented for > all supported devices. Just forget about 2d acceleration (aka blitters). Daniel did a write-up about the specific problems of 2d acceleration at [1]. (There's also video acceleration, which is a different story.) > Because of this, the DRM module requires via.modeset=1 to be added to > Linux kernel boot option line for it to function, and I intend to keep > this arrangement in place until at least 2D acceleration is fully > supported. Don't do that. Enable modesetting from day 1. You want to get the driver out to users ASAP. Otherwise, it'll take another 5 years. We plenty of options to disable your driver on systems where it fails. > As a result, I think the code is fairly low risk to be pulled into the > Linux kernel tree. Exactly. > The current module version is 3.5.2, but when the code is about to > be pulled into the kernel tree, I will like to up the version to 4.0.0. > This is because James Simmons era OpenChrome DRM used version number > 3.0.x, but the current OpenChrome DRM uAPI implementation is different > from his implementation, so I will like to assign a new major version > (i.e., 4) so that DDX can distinguish the old and new OpenChrome DRM. > The current uAPI has no backward compatibility with the older DRI1 based > implementation, although some remnants of old DRI1 based uAPI still needs > to be there inside via_drm.h for XvMC based libraries on the DDX side to > properly compile. What is the DDX required for? Would the regular X11 modesetting driver work as well? > It is my intention to replace the old DRI1 based VIA DRM located at > drivers/gpu/drm/via/ with OpenChrome DRM at the same location. > As I indicated previously, I do not wish to get pulled into the staging > area of the kernel tree. DRM is not allowed in staging. For the old via driver, I think we need a better apprach. IMHO it would be preferable to put the new driver into via/ but keep the old driver there as well. A build option would control which is being used. Best regards Thomas [1] https://blog.ffwll.ch/2018/08/no-2d-in-drm.html > I personally will like to have the option of porting the code to > BSD someday, however, the I2C bus access module (via_i2c.c) is GPL > based, so the DRM module license type is GPL (everything else is MIT > license based), for now. > I hope to replace this module someday with equivalent functionality > code that will be MIT license based. > I hope the uAPI variable types are compatible with BSD (please give > me advise on this since I do not know too much about this) since James > Simmons brought this up back in 2013 when he posted the code as RFC. > > https://lists.freedesktop.org/archives/dri-devel/2013-June/039594.html > https://lists.freedesktop.org/archives/dri-devel/2013-June/040811.html > > > Features: > > - Supports 12 different generations of VIA Technologies Chrome based > integrated graphics (CLE266 / KM400 / K8M800 / P4M800 Pro / PM800 / > P4M890 / K8M890 / P4M900 / CX700 / VX800 / VX855 / VX900 chipset) and > their variants > - Support for DAC (VGA), LVDS flat panel, DVI (CX700 / VX800 chipset > integrated, VX900 chipset integrated, and Silicon Image SiI164 / > VIA Technologies VT1632(A) DVI transmitter), and HDMI (VX900H chipset > integrated) > - Support for standby resume (ACPI S3 State) > - Support for dual head operation > - Supports atomic mode setting (implementation might still be incomplete > especially around gamma correction / palette initialization) > - Utilizes GEM / TTM for memory management > - Utilizes DRM FB Helper for FBDEV emulation > > > Known issues: > > - via_lvds.c gives out 3 unused function warnings (willing to delete > the offending functions since they are not used) > - Gamma correction / palette initialization code is still legacy KMS > based (Daniel, how do I convert it for atomic mode setting?) > - uAPI might not be quite right (Do I need something like > DRM_IOCTL_VIA_GEM_DESTROY or DRM_IOCTL_VIA_GEM_FREE call to pair it > against DRM_IOCTL_VIA_GEM_CREATE?) > > > Code repository: > https://cgit.freedesktop.org/openchrome/drm-openchrome/ > > Current bleeding edge branch (drm-next-5.20 branch): > https://cgit.freedesktop.org/openchrome/drm-openchrome/?h=drm-next-5.20 > > Current bleeding edge branch (drm-next-5.20 branch) code location: > https://cgit.freedesktop.org/openchrome/drm-openchrome/tree/drivers/gpu/drm/via?h=drm-next-5.20 > https://cgit.freedesktop.org/openchrome/drm-openchrome/tree/include/uapi/drm?h=drm-next-5.20 > > Obviously, I do not expect to get the code pulled in on my first try, > but if other people can point out what I need to improve, I will try to > improve the code so that I can get the code pulled in as soon as possible. > Personally, I will like the code to be pulled in for Linux 5.20, but I > sort of expect the next release after 5.20 is more likely. > > Regards, > > Kevin Brace > Brace Computer Laboratory blog > https://bracecomputerlab.com > > > --- > Kevin Brace (28): > drm/via: Add via_3d_reg.h > drm/via: Add via_crtc_hw.h > drm/via: Add via_disp_reg.h > drm/via: Add via_drv.h > drm/via: Add via_regs.h > drm/via: Add via_crtc.c > drm/via: Add via_crtc_hw.c > drm/via: Add via_cursor.c > drm/via: Add via_dac.c > drm/via: Add via_display.c > drm/via: Add via_drv.c > drm/via: Add via_encoder.c > drm/via: Add via_hdmi.c > drm/via: Add via_i2c.c > drm/via: Add via_init.c > drm/via: Add via_ioctl.c > drm/via: Add via_lvds.c > drm/via: Add via_object.c > drm/via: Add via_pll.c > drm/via: Add via_pm.c > drm/via: Add via_sii164.c > drm/via: Add via_tmds.c > drm/via: Add via_ttm.c > drm/via: Add via_vt1632.c > drm/via: Add via_drm.h > drm/via: Add Kconfig > drm/via: Add Makefile > drm/via: Modify DRM main Makefile to be able to build OpenChrome DRM > > drivers/gpu/drm/Makefile | 1 + > drivers/gpu/drm/via/Kconfig | 10 + > drivers/gpu/drm/via/Makefile | 26 + > drivers/gpu/drm/via/via_3d_reg.h | 1863 ++++++++++++++++++++++ > drivers/gpu/drm/via/via_crtc.c | 2324 ++++++++++++++++++++++++++++ > drivers/gpu/drm/via/via_crtc_hw.c | 91 ++ > drivers/gpu/drm/via/via_crtc_hw.h | 1048 +++++++++++++ > drivers/gpu/drm/via/via_cursor.c | 419 +++++ > drivers/gpu/drm/via/via_dac.c | 504 ++++++ > drivers/gpu/drm/via/via_disp_reg.h | 513 ++++++ > drivers/gpu/drm/via/via_display.c | 125 ++ > drivers/gpu/drm/via/via_drv.c | 313 ++++ > drivers/gpu/drm/via/via_drv.h | 437 ++++++ > drivers/gpu/drm/via/via_encoder.c | 173 +++ > drivers/gpu/drm/via/via_hdmi.c | 719 +++++++++ > drivers/gpu/drm/via/via_i2c.c | 209 +++ > drivers/gpu/drm/via/via_init.c | 1300 ++++++++++++++++ > drivers/gpu/drm/via/via_ioctl.c | 122 ++ > drivers/gpu/drm/via/via_lvds.c | 1420 +++++++++++++++++ > drivers/gpu/drm/via/via_object.c | 324 ++++ > drivers/gpu/drm/via/via_pll.c | 263 ++++ > drivers/gpu/drm/via/via_pm.c | 187 +++ > drivers/gpu/drm/via/via_regs.h | 296 ++++ > drivers/gpu/drm/via/via_sii164.c | 563 +++++++ > drivers/gpu/drm/via/via_tmds.c | 714 +++++++++ > drivers/gpu/drm/via/via_ttm.c | 168 ++ > drivers/gpu/drm/via/via_vt1632.c | 583 +++++++ > include/uapi/drm/via_drm.h | 309 ++++ > 28 files changed, 15024 insertions(+) > create mode 100644 drivers/gpu/drm/via/Kconfig > create mode 100644 drivers/gpu/drm/via/Makefile > create mode 100644 drivers/gpu/drm/via/via_3d_reg.h > create mode 100644 drivers/gpu/drm/via/via_crtc.c > create mode 100644 drivers/gpu/drm/via/via_crtc_hw.c > create mode 100644 drivers/gpu/drm/via/via_crtc_hw.h > create mode 100644 drivers/gpu/drm/via/via_cursor.c > create mode 100644 drivers/gpu/drm/via/via_dac.c > create mode 100644 drivers/gpu/drm/via/via_disp_reg.h > create mode 100644 drivers/gpu/drm/via/via_display.c > create mode 100644 drivers/gpu/drm/via/via_drv.c > create mode 100644 drivers/gpu/drm/via/via_drv.h > create mode 100644 drivers/gpu/drm/via/via_encoder.c > create mode 100644 drivers/gpu/drm/via/via_hdmi.c > create mode 100644 drivers/gpu/drm/via/via_i2c.c > create mode 100644 drivers/gpu/drm/via/via_init.c > create mode 100644 drivers/gpu/drm/via/via_ioctl.c > create mode 100644 drivers/gpu/drm/via/via_lvds.c > create mode 100644 drivers/gpu/drm/via/via_object.c > create mode 100644 drivers/gpu/drm/via/via_pll.c > create mode 100644 drivers/gpu/drm/via/via_pm.c > create mode 100644 drivers/gpu/drm/via/via_regs.h > create mode 100644 drivers/gpu/drm/via/via_sii164.c > create mode 100644 drivers/gpu/drm/via/via_tmds.c > create mode 100644 drivers/gpu/drm/via/via_ttm.c > create mode 100644 drivers/gpu/drm/via/via_vt1632.c > create mode 100644 include/uapi/drm/via_drm.h > > -- > 2.35.1 > -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Ivo Totev [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 840 bytes --] ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 00/28] OpenChrome DRM for Linux 5.20 2022-06-27 7:37 ` Thomas Zimmermann @ 2022-06-27 21:32 ` Sam Ravnborg 2022-06-28 12:21 ` Thomas Zimmermann 0 siblings, 1 reply; 34+ messages in thread From: Sam Ravnborg @ 2022-06-27 21:32 UTC (permalink / raw) To: Thomas Zimmermann; +Cc: Kevin Brace, dri-devel, Kevin Brace Hi Kevin/Thomas, > > I had a brief look over the patches. Even though the code looks fairly rough > in places, I think we should get this driver merged ASAP. Agreed, we have a had a few cases where we dragged out committing much too long time. Timing wise, it would be good if we can already hit drm-misc-next right _after_ the pull -so we have a full cycle to fix anything before it hits mainline. > For the old via driver, I think we need a better apprach. IMHO it would be > preferable to put the new driver into via/ but keep the old driver there as > well. A build option would control which is being used. I assume the user base for via drivers are very small and they have the fbdev driver already. So I support replacing the current via drm driver as Kevin tries to do. But anyway we need a patch set that applies without extra delete file / add file cycles as the next step. Sam ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 00/28] OpenChrome DRM for Linux 5.20 2022-06-27 21:32 ` Sam Ravnborg @ 2022-06-28 12:21 ` Thomas Zimmermann 2022-06-30 8:07 ` Javier Martinez Canillas 0 siblings, 1 reply; 34+ messages in thread From: Thomas Zimmermann @ 2022-06-28 12:21 UTC (permalink / raw) To: Sam Ravnborg; +Cc: Kevin Brace, dri-devel, Kevin Brace [-- Attachment #1.1.1: Type: text/plain, Size: 1860 bytes --] Hi Am 27.06.22 um 23:32 schrieb Sam Ravnborg: > Hi Kevin/Thomas, > >> >> I had a brief look over the patches. Even though the code looks fairly rough >> in places, I think we should get this driver merged ASAP. > > Agreed, we have a had a few cases where we dragged out committing much > too long time. > > Timing wise, it would be good if we can already hit drm-misc-next right > _after_ the pull -so we have a full cycle to fix anything before it hits > mainline. > >> For the old via driver, I think we need a better apprach. IMHO it would be >> preferable to put the new driver into via/ but keep the old driver there as >> well. A build option would control which is being used. > > I assume the user base for via drivers are very small and they have the > fbdev driver already. > So I support replacing the current via drm driver as Kevin tries to do. I don't know if there are still users of the old userspace, but if so I would consider this removal a regression. I think the old code supports 3d and video decoding. Depending on the feature set, 3d support might not be useful any longer, but video decoding probably is. (I might be wrong about all this.) IMHO we should not simply remove this at least until we can verify that it's no longer useful to anyone. However, legacy support is trivial. Kevin, please see the attached files for two cleanup patches. You're welcome to add them to the start of your patchset to get the legacy code out of the way. Best regards Thomas > > But anyway we need a patch set that applies without extra > delete file / add file cycles as the next step. > > Sam -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Ivo Totev [-- Attachment #1.1.2: 0001-drm-via-Move-legacy-code-into-single-file.patch --] [-- Type: text/x-patch, Size: 228412 bytes --] From 50a20465317a2b2eca1a5dba852b754fc26c96b8 Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann <tzimmermann@suse.de> Date: Tue, 28 Jun 2022 12:15:47 +0200 Subject: [PATCH 1/2] drm/via: Move legacy code into single file Prepare the driver for adding a modern modesetting driver by moving all legacy code into a single source file. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> --- drivers/gpu/drm/via/Makefile | 2 +- drivers/gpu/drm/via/via_dma.c | 744 ------ drivers/gpu/drm/via/via_dmablit.c | 807 ------ drivers/gpu/drm/via/via_dmablit.h | 140 - drivers/gpu/drm/via/via_drv.c | 124 - drivers/gpu/drm/via/via_drv.h | 229 -- drivers/gpu/drm/via/via_irq.c | 388 --- drivers/gpu/drm/via/via_legacy.c | 3836 ++++++++++++++++++++++++++++ drivers/gpu/drm/via/via_map.c | 132 - drivers/gpu/drm/via/via_mm.c | 241 -- drivers/gpu/drm/via/via_verifier.c | 1110 -------- drivers/gpu/drm/via/via_verifier.h | 62 - drivers/gpu/drm/via/via_video.c | 94 - 13 files changed, 3837 insertions(+), 4072 deletions(-) delete mode 100644 drivers/gpu/drm/via/via_dma.c delete mode 100644 drivers/gpu/drm/via/via_dmablit.c delete mode 100644 drivers/gpu/drm/via/via_dmablit.h delete mode 100644 drivers/gpu/drm/via/via_drv.c delete mode 100644 drivers/gpu/drm/via/via_drv.h delete mode 100644 drivers/gpu/drm/via/via_irq.c create mode 100644 drivers/gpu/drm/via/via_legacy.c delete mode 100644 drivers/gpu/drm/via/via_map.c delete mode 100644 drivers/gpu/drm/via/via_mm.c delete mode 100644 drivers/gpu/drm/via/via_verifier.c delete mode 100644 drivers/gpu/drm/via/via_verifier.h delete mode 100644 drivers/gpu/drm/via/via_video.c diff --git a/drivers/gpu/drm/via/Makefile b/drivers/gpu/drm/via/Makefile index 84db4eee7828..997620aa14f2 100644 --- a/drivers/gpu/drm/via/Makefile +++ b/drivers/gpu/drm/via/Makefile @@ -3,6 +3,6 @@ # Makefile for the drm device driver. This driver provides support for the # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. -via-y := via_irq.o via_drv.o via_map.o via_mm.o via_dma.o via_verifier.o via_video.o via_dmablit.o +via-y := via_legacy.o obj-$(CONFIG_DRM_VIA) +=via.o diff --git a/drivers/gpu/drm/via/via_dma.c b/drivers/gpu/drm/via/via_dma.c deleted file mode 100644 index 177b0499abf1..000000000000 --- a/drivers/gpu/drm/via/via_dma.c +++ /dev/null @@ -1,744 +0,0 @@ -/* via_dma.c -- DMA support for the VIA Unichrome/Pro - * - * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. - * All Rights Reserved. - * - * Copyright 2004 Digeo, Inc., Palo Alto, CA, U.S.A. - * All Rights Reserved. - * - * Copyright 2004 The Unichrome project. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE - * USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Tungsten Graphics, - * Erdi Chen, - * Thomas Hellstrom. - */ - -#include <linux/delay.h> -#include <linux/uaccess.h> - -#include <drm/drm.h> -#include <drm/drm_device.h> -#include <drm/drm_file.h> -#include <drm/via_drm.h> - -#include "via_drv.h" -#include "via_3d_reg.h" - -#define CMDBUF_ALIGNMENT_SIZE (0x100) -#define CMDBUF_ALIGNMENT_MASK (0x0ff) - -/* defines for VIA 3D registers */ -#define VIA_REG_STATUS 0x400 -#define VIA_REG_TRANSET 0x43C -#define VIA_REG_TRANSPACE 0x440 - -/* VIA_REG_STATUS(0x400): Engine Status */ -#define VIA_CMD_RGTR_BUSY 0x00000080 /* Command Regulator is busy */ -#define VIA_2D_ENG_BUSY 0x00000001 /* 2D Engine is busy */ -#define VIA_3D_ENG_BUSY 0x00000002 /* 3D Engine is busy */ -#define VIA_VR_QUEUE_BUSY 0x00020000 /* Virtual Queue is busy */ - -#define SetReg2DAGP(nReg, nData) { \ - *((uint32_t *)(vb)) = ((nReg) >> 2) | HALCYON_HEADER1; \ - *((uint32_t *)(vb) + 1) = (nData); \ - vb = ((uint32_t *)vb) + 2; \ - dev_priv->dma_low += 8; \ -} - -#define via_flush_write_combine() mb() - -#define VIA_OUT_RING_QW(w1, w2) do { \ - *vb++ = (w1); \ - *vb++ = (w2); \ - dev_priv->dma_low += 8; \ -} while (0) - -static void via_cmdbuf_start(drm_via_private_t *dev_priv); -static void via_cmdbuf_pause(drm_via_private_t *dev_priv); -static void via_cmdbuf_reset(drm_via_private_t *dev_priv); -static void via_cmdbuf_rewind(drm_via_private_t *dev_priv); -static int via_wait_idle(drm_via_private_t *dev_priv); -static void via_pad_cache(drm_via_private_t *dev_priv, int qwords); - -/* - * Free space in command buffer. - */ - -static uint32_t via_cmdbuf_space(drm_via_private_t *dev_priv) -{ - uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; - uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base; - - return ((hw_addr <= dev_priv->dma_low) ? - (dev_priv->dma_high + hw_addr - dev_priv->dma_low) : - (hw_addr - dev_priv->dma_low)); -} - -/* - * How much does the command regulator lag behind? - */ - -static uint32_t via_cmdbuf_lag(drm_via_private_t *dev_priv) -{ - uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; - uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base; - - return ((hw_addr <= dev_priv->dma_low) ? - (dev_priv->dma_low - hw_addr) : - (dev_priv->dma_wrap + dev_priv->dma_low - hw_addr)); -} - -/* - * Check that the given size fits in the buffer, otherwise wait. - */ - -static inline int -via_cmdbuf_wait(drm_via_private_t *dev_priv, unsigned int size) -{ - uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; - uint32_t cur_addr, hw_addr, next_addr; - volatile uint32_t *hw_addr_ptr; - uint32_t count; - hw_addr_ptr = dev_priv->hw_addr_ptr; - cur_addr = dev_priv->dma_low; - next_addr = cur_addr + size + 512 * 1024; - count = 1000000; - do { - hw_addr = *hw_addr_ptr - agp_base; - if (count-- == 0) { - DRM_ERROR - ("via_cmdbuf_wait timed out hw %x cur_addr %x next_addr %x\n", - hw_addr, cur_addr, next_addr); - return -1; - } - if ((cur_addr < hw_addr) && (next_addr >= hw_addr)) - msleep(1); - } while ((cur_addr < hw_addr) && (next_addr >= hw_addr)); - return 0; -} - -/* - * Checks whether buffer head has reach the end. Rewind the ring buffer - * when necessary. - * - * Returns virtual pointer to ring buffer. - */ - -static inline uint32_t *via_check_dma(drm_via_private_t * dev_priv, - unsigned int size) -{ - if ((dev_priv->dma_low + size + 4 * CMDBUF_ALIGNMENT_SIZE) > - dev_priv->dma_high) { - via_cmdbuf_rewind(dev_priv); - } - if (via_cmdbuf_wait(dev_priv, size) != 0) - return NULL; - - return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low); -} - -int via_dma_cleanup(struct drm_device *dev) -{ - if (dev->dev_private) { - drm_via_private_t *dev_priv = - (drm_via_private_t *) dev->dev_private; - - if (dev_priv->ring.virtual_start) { - via_cmdbuf_reset(dev_priv); - - drm_legacy_ioremapfree(&dev_priv->ring.map, dev); - dev_priv->ring.virtual_start = NULL; - } - - } - - return 0; -} - -static int via_initialize(struct drm_device *dev, - drm_via_private_t *dev_priv, - drm_via_dma_init_t *init) -{ - if (!dev_priv || !dev_priv->mmio) { - DRM_ERROR("via_dma_init called before via_map_init\n"); - return -EFAULT; - } - - if (dev_priv->ring.virtual_start != NULL) { - DRM_ERROR("called again without calling cleanup\n"); - return -EFAULT; - } - - if (!dev->agp || !dev->agp->base) { - DRM_ERROR("called with no agp memory available\n"); - return -EFAULT; - } - - if (dev_priv->chipset == VIA_DX9_0) { - DRM_ERROR("AGP DMA is not supported on this chip\n"); - return -EINVAL; - } - - dev_priv->ring.map.offset = dev->agp->base + init->offset; - dev_priv->ring.map.size = init->size; - dev_priv->ring.map.type = 0; - dev_priv->ring.map.flags = 0; - dev_priv->ring.map.mtrr = 0; - - drm_legacy_ioremap(&dev_priv->ring.map, dev); - - if (dev_priv->ring.map.handle == NULL) { - via_dma_cleanup(dev); - DRM_ERROR("can not ioremap virtual address for" - " ring buffer\n"); - return -ENOMEM; - } - - dev_priv->ring.virtual_start = dev_priv->ring.map.handle; - - dev_priv->dma_ptr = dev_priv->ring.virtual_start; - dev_priv->dma_low = 0; - dev_priv->dma_high = init->size; - dev_priv->dma_wrap = init->size; - dev_priv->dma_offset = init->offset; - dev_priv->last_pause_ptr = NULL; - dev_priv->hw_addr_ptr = - (volatile uint32_t *)((char *)dev_priv->mmio->handle + - init->reg_pause_addr); - - via_cmdbuf_start(dev_priv); - - return 0; -} - -static int via_dma_init(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - drm_via_dma_init_t *init = data; - int retcode = 0; - - switch (init->func) { - case VIA_INIT_DMA: - if (!capable(CAP_SYS_ADMIN)) - retcode = -EPERM; - else - retcode = via_initialize(dev, dev_priv, init); - break; - case VIA_CLEANUP_DMA: - if (!capable(CAP_SYS_ADMIN)) - retcode = -EPERM; - else - retcode = via_dma_cleanup(dev); - break; - case VIA_DMA_INITIALIZED: - retcode = (dev_priv->ring.virtual_start != NULL) ? - 0 : -EFAULT; - break; - default: - retcode = -EINVAL; - break; - } - - return retcode; -} - -static int via_dispatch_cmdbuffer(struct drm_device *dev, drm_via_cmdbuffer_t *cmd) -{ - drm_via_private_t *dev_priv; - uint32_t *vb; - int ret; - - dev_priv = (drm_via_private_t *) dev->dev_private; - - if (dev_priv->ring.virtual_start == NULL) { - DRM_ERROR("called without initializing AGP ring buffer.\n"); - return -EFAULT; - } - - if (cmd->size > VIA_PCI_BUF_SIZE) - return -ENOMEM; - - if (copy_from_user(dev_priv->pci_buf, cmd->buf, cmd->size)) - return -EFAULT; - - /* - * Running this function on AGP memory is dead slow. Therefore - * we run it on a temporary cacheable system memory buffer and - * copy it to AGP memory when ready. - */ - - if ((ret = - via_verify_command_stream((uint32_t *) dev_priv->pci_buf, - cmd->size, dev, 1))) { - return ret; - } - - vb = via_check_dma(dev_priv, (cmd->size < 0x100) ? 0x102 : cmd->size); - if (vb == NULL) - return -EAGAIN; - - memcpy(vb, dev_priv->pci_buf, cmd->size); - - dev_priv->dma_low += cmd->size; - - /* - * Small submissions somehow stalls the CPU. (AGP cache effects?) - * pad to greater size. - */ - - if (cmd->size < 0x100) - via_pad_cache(dev_priv, (0x100 - cmd->size) >> 3); - via_cmdbuf_pause(dev_priv); - - return 0; -} - -int via_driver_dma_quiescent(struct drm_device *dev) -{ - drm_via_private_t *dev_priv = dev->dev_private; - - if (!via_wait_idle(dev_priv)) - return -EBUSY; - return 0; -} - -static int via_flush_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - - LOCK_TEST_WITH_RETURN(dev, file_priv); - - return via_driver_dma_quiescent(dev); -} - -static int via_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_cmdbuffer_t *cmdbuf = data; - int ret; - - LOCK_TEST_WITH_RETURN(dev, file_priv); - - DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size); - - ret = via_dispatch_cmdbuffer(dev, cmdbuf); - return ret; -} - -static int via_dispatch_pci_cmdbuffer(struct drm_device *dev, - drm_via_cmdbuffer_t *cmd) -{ - drm_via_private_t *dev_priv = dev->dev_private; - int ret; - - if (cmd->size > VIA_PCI_BUF_SIZE) - return -ENOMEM; - if (copy_from_user(dev_priv->pci_buf, cmd->buf, cmd->size)) - return -EFAULT; - - if ((ret = - via_verify_command_stream((uint32_t *) dev_priv->pci_buf, - cmd->size, dev, 0))) { - return ret; - } - - ret = - via_parse_command_stream(dev, (const uint32_t *)dev_priv->pci_buf, - cmd->size); - return ret; -} - -static int via_pci_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_cmdbuffer_t *cmdbuf = data; - int ret; - - LOCK_TEST_WITH_RETURN(dev, file_priv); - - DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size); - - ret = via_dispatch_pci_cmdbuffer(dev, cmdbuf); - return ret; -} - -static inline uint32_t *via_align_buffer(drm_via_private_t *dev_priv, - uint32_t * vb, int qw_count) -{ - for (; qw_count > 0; --qw_count) - VIA_OUT_RING_QW(HC_DUMMY, HC_DUMMY); - return vb; -} - -/* - * This function is used internally by ring buffer management code. - * - * Returns virtual pointer to ring buffer. - */ -static inline uint32_t *via_get_dma(drm_via_private_t *dev_priv) -{ - return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low); -} - -/* - * Hooks a segment of data into the tail of the ring-buffer by - * modifying the pause address stored in the buffer itself. If - * the regulator has already paused, restart it. - */ -static int via_hook_segment(drm_via_private_t *dev_priv, - uint32_t pause_addr_hi, uint32_t pause_addr_lo, - int no_pci_fire) -{ - int paused, count; - volatile uint32_t *paused_at = dev_priv->last_pause_ptr; - uint32_t reader, ptr; - uint32_t diff; - - paused = 0; - via_flush_write_combine(); - (void) *(volatile uint32_t *)(via_get_dma(dev_priv) - 1); - - *paused_at = pause_addr_lo; - via_flush_write_combine(); - (void) *paused_at; - - reader = *(dev_priv->hw_addr_ptr); - ptr = ((volatile char *)paused_at - dev_priv->dma_ptr) + - dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; - - dev_priv->last_pause_ptr = via_get_dma(dev_priv) - 1; - - /* - * If there is a possibility that the command reader will - * miss the new pause address and pause on the old one, - * In that case we need to program the new start address - * using PCI. - */ - - diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; - count = 10000000; - while (diff == 0 && count--) { - paused = (via_read(dev_priv, 0x41c) & 0x80000000); - if (paused) - break; - reader = *(dev_priv->hw_addr_ptr); - diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; - } - - paused = via_read(dev_priv, 0x41c) & 0x80000000; - - if (paused && !no_pci_fire) { - reader = *(dev_priv->hw_addr_ptr); - diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; - diff &= (dev_priv->dma_high - 1); - if (diff != 0 && diff < (dev_priv->dma_high >> 1)) { - DRM_ERROR("Paused at incorrect address. " - "0x%08x, 0x%08x 0x%08x\n", - ptr, reader, dev_priv->dma_diff); - } else if (diff == 0) { - /* - * There is a concern that these writes may stall the PCI bus - * if the GPU is not idle. However, idling the GPU first - * doesn't make a difference. - */ - - via_write(dev_priv, VIA_REG_TRANSET, (HC_ParaType_PreCR << 16)); - via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_hi); - via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_lo); - via_read(dev_priv, VIA_REG_TRANSPACE); - } - } - return paused; -} - -static int via_wait_idle(drm_via_private_t *dev_priv) -{ - int count = 10000000; - - while (!(via_read(dev_priv, VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && --count) - ; - - while (count && (via_read(dev_priv, VIA_REG_STATUS) & - (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | - VIA_3D_ENG_BUSY))) - --count; - return count; -} - -static uint32_t *via_align_cmd(drm_via_private_t *dev_priv, uint32_t cmd_type, - uint32_t addr, uint32_t *cmd_addr_hi, - uint32_t *cmd_addr_lo, int skip_wait) -{ - uint32_t agp_base; - uint32_t cmd_addr, addr_lo, addr_hi; - uint32_t *vb; - uint32_t qw_pad_count; - - if (!skip_wait) - via_cmdbuf_wait(dev_priv, 2 * CMDBUF_ALIGNMENT_SIZE); - - vb = via_get_dma(dev_priv); - VIA_OUT_RING_QW(HC_HEADER2 | ((VIA_REG_TRANSET >> 2) << 12) | - (VIA_REG_TRANSPACE >> 2), HC_ParaType_PreCR << 16); - agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; - qw_pad_count = (CMDBUF_ALIGNMENT_SIZE >> 3) - - ((dev_priv->dma_low & CMDBUF_ALIGNMENT_MASK) >> 3); - - cmd_addr = (addr) ? addr : - agp_base + dev_priv->dma_low - 8 + (qw_pad_count << 3); - addr_lo = ((HC_SubA_HAGPBpL << 24) | (cmd_type & HC_HAGPBpID_MASK) | - (cmd_addr & HC_HAGPBpL_MASK)); - addr_hi = ((HC_SubA_HAGPBpH << 24) | (cmd_addr >> 24)); - - vb = via_align_buffer(dev_priv, vb, qw_pad_count - 1); - VIA_OUT_RING_QW(*cmd_addr_hi = addr_hi, *cmd_addr_lo = addr_lo); - return vb; -} - -static void via_cmdbuf_start(drm_via_private_t *dev_priv) -{ - uint32_t pause_addr_lo, pause_addr_hi; - uint32_t start_addr, start_addr_lo; - uint32_t end_addr, end_addr_lo; - uint32_t command; - uint32_t agp_base; - uint32_t ptr; - uint32_t reader; - int count; - - dev_priv->dma_low = 0; - - agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; - start_addr = agp_base; - end_addr = agp_base + dev_priv->dma_high; - - start_addr_lo = ((HC_SubA_HAGPBstL << 24) | (start_addr & 0xFFFFFF)); - end_addr_lo = ((HC_SubA_HAGPBendL << 24) | (end_addr & 0xFFFFFF)); - command = ((HC_SubA_HAGPCMNT << 24) | (start_addr >> 24) | - ((end_addr & 0xff000000) >> 16)); - - dev_priv->last_pause_ptr = - via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, - &pause_addr_hi, &pause_addr_lo, 1) - 1; - - via_flush_write_combine(); - (void) *(volatile uint32_t *)dev_priv->last_pause_ptr; - - via_write(dev_priv, VIA_REG_TRANSET, (HC_ParaType_PreCR << 16)); - via_write(dev_priv, VIA_REG_TRANSPACE, command); - via_write(dev_priv, VIA_REG_TRANSPACE, start_addr_lo); - via_write(dev_priv, VIA_REG_TRANSPACE, end_addr_lo); - - via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_hi); - via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_lo); - wmb(); - via_write(dev_priv, VIA_REG_TRANSPACE, command | HC_HAGPCMNT_MASK); - via_read(dev_priv, VIA_REG_TRANSPACE); - - dev_priv->dma_diff = 0; - - count = 10000000; - while (!(via_read(dev_priv, 0x41c) & 0x80000000) && count--); - - reader = *(dev_priv->hw_addr_ptr); - ptr = ((volatile char *)dev_priv->last_pause_ptr - dev_priv->dma_ptr) + - dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; - - /* - * This is the difference between where we tell the - * command reader to pause and where it actually pauses. - * This differs between hw implementation so we need to - * detect it. - */ - - dev_priv->dma_diff = ptr - reader; -} - -static void via_pad_cache(drm_via_private_t *dev_priv, int qwords) -{ - uint32_t *vb; - - via_cmdbuf_wait(dev_priv, qwords + 2); - vb = via_get_dma(dev_priv); - VIA_OUT_RING_QW(HC_HEADER2, HC_ParaType_NotTex << 16); - via_align_buffer(dev_priv, vb, qwords); -} - -static inline void via_dummy_bitblt(drm_via_private_t *dev_priv) -{ - uint32_t *vb = via_get_dma(dev_priv); - SetReg2DAGP(0x0C, (0 | (0 << 16))); - SetReg2DAGP(0x10, 0 | (0 << 16)); - SetReg2DAGP(0x0, 0x1 | 0x2000 | 0xAA000000); -} - -static void via_cmdbuf_jump(drm_via_private_t *dev_priv) -{ - uint32_t pause_addr_lo, pause_addr_hi; - uint32_t jump_addr_lo, jump_addr_hi; - volatile uint32_t *last_pause_ptr; - uint32_t dma_low_save1, dma_low_save2; - - via_align_cmd(dev_priv, HC_HAGPBpID_JUMP, 0, &jump_addr_hi, - &jump_addr_lo, 0); - - dev_priv->dma_wrap = dev_priv->dma_low; - - /* - * Wrap command buffer to the beginning. - */ - - dev_priv->dma_low = 0; - if (via_cmdbuf_wait(dev_priv, CMDBUF_ALIGNMENT_SIZE) != 0) - DRM_ERROR("via_cmdbuf_jump failed\n"); - - via_dummy_bitblt(dev_priv); - via_dummy_bitblt(dev_priv); - - last_pause_ptr = - via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, - &pause_addr_lo, 0) - 1; - via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, - &pause_addr_lo, 0); - - *last_pause_ptr = pause_addr_lo; - dma_low_save1 = dev_priv->dma_low; - - /* - * Now, set a trap that will pause the regulator if it tries to rerun the old - * command buffer. (Which may happen if via_hook_segment detecs a command regulator pause - * and reissues the jump command over PCI, while the regulator has already taken the jump - * and actually paused at the current buffer end). - * There appears to be no other way to detect this condition, since the hw_addr_pointer - * does not seem to get updated immediately when a jump occurs. - */ - - last_pause_ptr = - via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, - &pause_addr_lo, 0) - 1; - via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, - &pause_addr_lo, 0); - *last_pause_ptr = pause_addr_lo; - - dma_low_save2 = dev_priv->dma_low; - dev_priv->dma_low = dma_low_save1; - via_hook_segment(dev_priv, jump_addr_hi, jump_addr_lo, 0); - dev_priv->dma_low = dma_low_save2; - via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); -} - - -static void via_cmdbuf_rewind(drm_via_private_t *dev_priv) -{ - via_cmdbuf_jump(dev_priv); -} - -static void via_cmdbuf_flush(drm_via_private_t *dev_priv, uint32_t cmd_type) -{ - uint32_t pause_addr_lo, pause_addr_hi; - - via_align_cmd(dev_priv, cmd_type, 0, &pause_addr_hi, &pause_addr_lo, 0); - via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); -} - -static void via_cmdbuf_pause(drm_via_private_t *dev_priv) -{ - via_cmdbuf_flush(dev_priv, HC_HAGPBpID_PAUSE); -} - -static void via_cmdbuf_reset(drm_via_private_t *dev_priv) -{ - via_cmdbuf_flush(dev_priv, HC_HAGPBpID_STOP); - via_wait_idle(dev_priv); -} - -/* - * User interface to the space and lag functions. - */ - -static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_cmdbuf_size_t *d_siz = data; - int ret = 0; - uint32_t tmp_size, count; - drm_via_private_t *dev_priv; - - DRM_DEBUG("\n"); - LOCK_TEST_WITH_RETURN(dev, file_priv); - - dev_priv = (drm_via_private_t *) dev->dev_private; - - if (dev_priv->ring.virtual_start == NULL) { - DRM_ERROR("called without initializing AGP ring buffer.\n"); - return -EFAULT; - } - - count = 1000000; - tmp_size = d_siz->size; - switch (d_siz->func) { - case VIA_CMDBUF_SPACE: - while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size) - && --count) { - if (!d_siz->wait) - break; - } - if (!count) { - DRM_ERROR("VIA_CMDBUF_SPACE timed out.\n"); - ret = -EAGAIN; - } - break; - case VIA_CMDBUF_LAG: - while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size) - && --count) { - if (!d_siz->wait) - break; - } - if (!count) { - DRM_ERROR("VIA_CMDBUF_LAG timed out.\n"); - ret = -EAGAIN; - } - break; - default: - ret = -EFAULT; - } - d_siz->size = tmp_size; - - return ret; -} - -const struct drm_ioctl_desc via_ioctls[] = { - DRM_IOCTL_DEF_DRV(VIA_ALLOCMEM, via_mem_alloc, DRM_AUTH), - DRM_IOCTL_DEF_DRV(VIA_FREEMEM, via_mem_free, DRM_AUTH), - DRM_IOCTL_DEF_DRV(VIA_AGP_INIT, via_agp_init, DRM_AUTH|DRM_MASTER), - DRM_IOCTL_DEF_DRV(VIA_FB_INIT, via_fb_init, DRM_AUTH|DRM_MASTER), - DRM_IOCTL_DEF_DRV(VIA_MAP_INIT, via_map_init, DRM_AUTH|DRM_MASTER), - DRM_IOCTL_DEF_DRV(VIA_DEC_FUTEX, via_decoder_futex, DRM_AUTH), - DRM_IOCTL_DEF_DRV(VIA_DMA_INIT, via_dma_init, DRM_AUTH), - DRM_IOCTL_DEF_DRV(VIA_CMDBUFFER, via_cmdbuffer, DRM_AUTH), - DRM_IOCTL_DEF_DRV(VIA_FLUSH, via_flush_ioctl, DRM_AUTH), - DRM_IOCTL_DEF_DRV(VIA_PCICMD, via_pci_cmdbuffer, DRM_AUTH), - DRM_IOCTL_DEF_DRV(VIA_CMDBUF_SIZE, via_cmdbuf_size, DRM_AUTH), - DRM_IOCTL_DEF_DRV(VIA_WAIT_IRQ, via_wait_irq, DRM_AUTH), - DRM_IOCTL_DEF_DRV(VIA_DMA_BLIT, via_dma_blit, DRM_AUTH), - DRM_IOCTL_DEF_DRV(VIA_BLIT_SYNC, via_dma_blit_sync, DRM_AUTH) -}; - -int via_max_ioctl = ARRAY_SIZE(via_ioctls); diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c deleted file mode 100644 index e016a4d62090..000000000000 --- a/drivers/gpu/drm/via/via_dmablit.c +++ /dev/null @@ -1,807 +0,0 @@ -/* via_dmablit.c -- PCI DMA BitBlt support for the VIA Unichrome/Pro - * - * Copyright (C) 2005 Thomas Hellstrom, All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE - * USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Hellstrom. - * Partially based on code obtained from Digeo Inc. - */ - - -/* - * Unmaps the DMA mappings. - * FIXME: Is this a NoOp on x86? Also - * FIXME: What happens if this one is called and a pending blit has previously done - * the same DMA mappings? - */ - -#include <linux/pagemap.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> - -#include <drm/drm_device.h> -#include <drm/via_drm.h> - -#include "via_dmablit.h" -#include "via_drv.h" - -#define VIA_PGDN(x) (((unsigned long)(x)) & PAGE_MASK) -#define VIA_PGOFF(x) (((unsigned long)(x)) & ~PAGE_MASK) -#define VIA_PFN(x) ((unsigned long)(x) >> PAGE_SHIFT) - -typedef struct _drm_via_descriptor { - uint32_t mem_addr; - uint32_t dev_addr; - uint32_t size; - uint32_t next; -} drm_via_descriptor_t; - - -/* - * Unmap a DMA mapping. - */ - - - -static void -via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg) -{ - int num_desc = vsg->num_desc; - unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page; - unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page; - drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] + - descriptor_this_page; - dma_addr_t next = vsg->chain_start; - - while (num_desc--) { - if (descriptor_this_page-- == 0) { - cur_descriptor_page--; - descriptor_this_page = vsg->descriptors_per_page - 1; - desc_ptr = vsg->desc_pages[cur_descriptor_page] + - descriptor_this_page; - } - dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE); - dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction); - next = (dma_addr_t) desc_ptr->next; - desc_ptr--; - } -} - -/* - * If mode = 0, count how many descriptors are needed. - * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors. - * Descriptors are run in reverse order by the hardware because we are not allowed to update the - * 'next' field without syncing calls when the descriptor is already mapped. - */ - -static void -via_map_blit_for_device(struct pci_dev *pdev, - const drm_via_dmablit_t *xfer, - drm_via_sg_info_t *vsg, - int mode) -{ - unsigned cur_descriptor_page = 0; - unsigned num_descriptors_this_page = 0; - unsigned char *mem_addr = xfer->mem_addr; - unsigned char *cur_mem; - unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr); - uint32_t fb_addr = xfer->fb_addr; - uint32_t cur_fb; - unsigned long line_len; - unsigned remaining_len; - int num_desc = 0; - int cur_line; - dma_addr_t next = 0 | VIA_DMA_DPR_EC; - drm_via_descriptor_t *desc_ptr = NULL; - - if (mode == 1) - desc_ptr = vsg->desc_pages[cur_descriptor_page]; - - for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) { - - line_len = xfer->line_length; - cur_fb = fb_addr; - cur_mem = mem_addr; - - while (line_len > 0) { - - remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len); - line_len -= remaining_len; - - if (mode == 1) { - desc_ptr->mem_addr = - dma_map_page(&pdev->dev, - vsg->pages[VIA_PFN(cur_mem) - - VIA_PFN(first_addr)], - VIA_PGOFF(cur_mem), remaining_len, - vsg->direction); - desc_ptr->dev_addr = cur_fb; - - desc_ptr->size = remaining_len; - desc_ptr->next = (uint32_t) next; - next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr), - DMA_TO_DEVICE); - desc_ptr++; - if (++num_descriptors_this_page >= vsg->descriptors_per_page) { - num_descriptors_this_page = 0; - desc_ptr = vsg->desc_pages[++cur_descriptor_page]; - } - } - - num_desc++; - cur_mem += remaining_len; - cur_fb += remaining_len; - } - - mem_addr += xfer->mem_stride; - fb_addr += xfer->fb_stride; - } - - if (mode == 1) { - vsg->chain_start = next; - vsg->state = dr_via_device_mapped; - } - vsg->num_desc = num_desc; -} - -/* - * Function that frees up all resources for a blit. It is usable even if the - * blit info has only been partially built as long as the status enum is consistent - * with the actual status of the used resources. - */ - - -static void -via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) -{ - int i; - - switch (vsg->state) { - case dr_via_device_mapped: - via_unmap_blit_from_device(pdev, vsg); - fallthrough; - case dr_via_desc_pages_alloc: - for (i = 0; i < vsg->num_desc_pages; ++i) { - if (vsg->desc_pages[i] != NULL) - free_page((unsigned long)vsg->desc_pages[i]); - } - kfree(vsg->desc_pages); - fallthrough; - case dr_via_pages_locked: - unpin_user_pages_dirty_lock(vsg->pages, vsg->num_pages, - (vsg->direction == DMA_FROM_DEVICE)); - fallthrough; - case dr_via_pages_alloc: - vfree(vsg->pages); - fallthrough; - default: - vsg->state = dr_via_sg_init; - } - vfree(vsg->bounce_buffer); - vsg->bounce_buffer = NULL; - vsg->free_on_sequence = 0; -} - -/* - * Fire a blit engine. - */ - -static void -via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - - via_write(dev_priv, VIA_PCI_DMA_MAR0 + engine*0x10, 0); - via_write(dev_priv, VIA_PCI_DMA_DAR0 + engine*0x10, 0); - via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD | - VIA_DMA_CSR_DE); - via_write(dev_priv, VIA_PCI_DMA_MR0 + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE); - via_write(dev_priv, VIA_PCI_DMA_BCR0 + engine*0x10, 0); - via_write(dev_priv, VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start); - wmb(); - via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS); - via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04); -} - -/* - * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will - * occur here if the calling user does not have access to the submitted address. - */ - -static int -via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) -{ - int ret; - unsigned long first_pfn = VIA_PFN(xfer->mem_addr); - vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) - - first_pfn + 1; - - vsg->pages = vzalloc(array_size(sizeof(struct page *), vsg->num_pages)); - if (NULL == vsg->pages) - return -ENOMEM; - ret = pin_user_pages_fast((unsigned long)xfer->mem_addr, - vsg->num_pages, - vsg->direction == DMA_FROM_DEVICE ? FOLL_WRITE : 0, - vsg->pages); - if (ret != vsg->num_pages) { - if (ret < 0) - return ret; - vsg->state = dr_via_pages_locked; - return -EINVAL; - } - vsg->state = dr_via_pages_locked; - DRM_DEBUG("DMA pages locked\n"); - return 0; -} - -/* - * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the - * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be - * quite large for some blits, and pages don't need to be contiguous. - */ - -static int -via_alloc_desc_pages(drm_via_sg_info_t *vsg) -{ - int i; - - vsg->descriptors_per_page = PAGE_SIZE / sizeof(drm_via_descriptor_t); - vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) / - vsg->descriptors_per_page; - - if (NULL == (vsg->desc_pages = kcalloc(vsg->num_desc_pages, sizeof(void *), GFP_KERNEL))) - return -ENOMEM; - - vsg->state = dr_via_desc_pages_alloc; - for (i = 0; i < vsg->num_desc_pages; ++i) { - if (NULL == (vsg->desc_pages[i] = - (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL))) - return -ENOMEM; - } - DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages, - vsg->num_desc); - return 0; -} - -static void -via_abort_dmablit(struct drm_device *dev, int engine) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - - via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA); -} - -static void -via_dmablit_engine_off(struct drm_device *dev, int engine) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - - via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD); -} - - - -/* - * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here. - * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue - * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while - * the workqueue task takes care of processing associated with the old blit. - */ - -void -via_dmablit_handler(struct drm_device *dev, int engine, int from_irq) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - drm_via_blitq_t *blitq = dev_priv->blit_queues + engine; - int cur; - int done_transfer; - unsigned long irqsave = 0; - uint32_t status = 0; - - DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n", - engine, from_irq, (unsigned long) blitq); - - if (from_irq) - spin_lock(&blitq->blit_lock); - else - spin_lock_irqsave(&blitq->blit_lock, irqsave); - - done_transfer = blitq->is_active && - ((status = via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD); - done_transfer = done_transfer || (blitq->aborting && !(status & VIA_DMA_CSR_DE)); - - cur = blitq->cur; - if (done_transfer) { - - blitq->blits[cur]->aborted = blitq->aborting; - blitq->done_blit_handle++; - wake_up(blitq->blit_queue + cur); - - cur++; - if (cur >= VIA_NUM_BLIT_SLOTS) - cur = 0; - blitq->cur = cur; - - /* - * Clear transfer done flag. - */ - - via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD); - - blitq->is_active = 0; - blitq->aborting = 0; - schedule_work(&blitq->wq); - - } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) { - - /* - * Abort transfer after one second. - */ - - via_abort_dmablit(dev, engine); - blitq->aborting = 1; - blitq->end = jiffies + HZ; - } - - if (!blitq->is_active) { - if (blitq->num_outstanding) { - via_fire_dmablit(dev, blitq->blits[cur], engine); - blitq->is_active = 1; - blitq->cur = cur; - blitq->num_outstanding--; - blitq->end = jiffies + HZ; - if (!timer_pending(&blitq->poll_timer)) - mod_timer(&blitq->poll_timer, jiffies + 1); - } else { - if (timer_pending(&blitq->poll_timer)) - del_timer(&blitq->poll_timer); - via_dmablit_engine_off(dev, engine); - } - } - - if (from_irq) - spin_unlock(&blitq->blit_lock); - else - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); -} - - - -/* - * Check whether this blit is still active, performing necessary locking. - */ - -static int -via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue) -{ - unsigned long irqsave; - uint32_t slot; - int active; - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - - /* - * Allow for handle wraparounds. - */ - - active = ((blitq->done_blit_handle - handle) > (1 << 23)) && - ((blitq->cur_blit_handle - handle) <= (1 << 23)); - - if (queue && active) { - slot = handle - blitq->done_blit_handle + blitq->cur - 1; - if (slot >= VIA_NUM_BLIT_SLOTS) - slot -= VIA_NUM_BLIT_SLOTS; - *queue = blitq->blit_queue + slot; - } - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - return active; -} - -/* - * Sync. Wait for at least three seconds for the blit to be performed. - */ - -static int -via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine) -{ - - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - drm_via_blitq_t *blitq = dev_priv->blit_queues + engine; - wait_queue_head_t *queue; - int ret = 0; - - if (via_dmablit_active(blitq, engine, handle, &queue)) { - VIA_WAIT_ON(ret, *queue, 3 * HZ, - !via_dmablit_active(blitq, engine, handle, NULL)); - } - DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n", - handle, engine, ret); - - return ret; -} - - -/* - * A timer that regularly polls the blit engine in cases where we don't have interrupts: - * a) Broken hardware (typically those that don't have any video capture facility). - * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted. - * The timer and hardware IRQ's can and do work in parallel. If the hardware has - * irqs, it will shorten the latency somewhat. - */ - - - -static void -via_dmablit_timer(struct timer_list *t) -{ - drm_via_blitq_t *blitq = from_timer(blitq, t, poll_timer); - struct drm_device *dev = blitq->dev; - int engine = (int) - (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues); - - DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine, - (unsigned long) jiffies); - - via_dmablit_handler(dev, engine, 0); - - if (!timer_pending(&blitq->poll_timer)) { - mod_timer(&blitq->poll_timer, jiffies + 1); - - /* - * Rerun handler to delete timer if engines are off, and - * to shorten abort latency. This is a little nasty. - */ - - via_dmablit_handler(dev, engine, 0); - - } -} - - - - -/* - * Workqueue task that frees data and mappings associated with a blit. - * Also wakes up waiting processes. Each of these tasks handles one - * blit engine only and may not be called on each interrupt. - */ - - -static void -via_dmablit_workqueue(struct work_struct *work) -{ - drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq); - struct drm_device *dev = blitq->dev; - struct pci_dev *pdev = to_pci_dev(dev->dev); - unsigned long irqsave; - drm_via_sg_info_t *cur_sg; - int cur_released; - - - DRM_DEBUG("Workqueue task called for blit engine %ld\n", (unsigned long) - (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues)); - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - - while (blitq->serviced != blitq->cur) { - - cur_released = blitq->serviced++; - - DRM_DEBUG("Releasing blit slot %d\n", cur_released); - - if (blitq->serviced >= VIA_NUM_BLIT_SLOTS) - blitq->serviced = 0; - - cur_sg = blitq->blits[cur_released]; - blitq->num_free++; - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - wake_up(&blitq->busy_queue); - - via_free_sg_info(pdev, cur_sg); - kfree(cur_sg); - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - } - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); -} - - -/* - * Init all blit engines. Currently we use two, but some hardware have 4. - */ - - -void -via_init_dmablit(struct drm_device *dev) -{ - int i, j; - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - struct pci_dev *pdev = to_pci_dev(dev->dev); - drm_via_blitq_t *blitq; - - pci_set_master(pdev); - - for (i = 0; i < VIA_NUM_BLIT_ENGINES; ++i) { - blitq = dev_priv->blit_queues + i; - blitq->dev = dev; - blitq->cur_blit_handle = 0; - blitq->done_blit_handle = 0; - blitq->head = 0; - blitq->cur = 0; - blitq->serviced = 0; - blitq->num_free = VIA_NUM_BLIT_SLOTS - 1; - blitq->num_outstanding = 0; - blitq->is_active = 0; - blitq->aborting = 0; - spin_lock_init(&blitq->blit_lock); - for (j = 0; j < VIA_NUM_BLIT_SLOTS; ++j) - init_waitqueue_head(blitq->blit_queue + j); - init_waitqueue_head(&blitq->busy_queue); - INIT_WORK(&blitq->wq, via_dmablit_workqueue); - timer_setup(&blitq->poll_timer, via_dmablit_timer, 0); - } -} - -/* - * Build all info and do all mappings required for a blit. - */ - - -static int -via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) -{ - struct pci_dev *pdev = to_pci_dev(dev->dev); - int draw = xfer->to_fb; - int ret = 0; - - vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; - vsg->bounce_buffer = NULL; - - vsg->state = dr_via_sg_init; - - if (xfer->num_lines <= 0 || xfer->line_length <= 0) { - DRM_ERROR("Zero size bitblt.\n"); - return -EINVAL; - } - - /* - * Below check is a driver limitation, not a hardware one. We - * don't want to lock unused pages, and don't want to incoporate the - * extra logic of avoiding them. Make sure there are no. - * (Not a big limitation anyway.) - */ - - if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) { - DRM_ERROR("Too large system memory stride. Stride: %d, " - "Length: %d\n", xfer->mem_stride, xfer->line_length); - return -EINVAL; - } - - if ((xfer->mem_stride == xfer->line_length) && - (xfer->fb_stride == xfer->line_length)) { - xfer->mem_stride *= xfer->num_lines; - xfer->line_length = xfer->mem_stride; - xfer->fb_stride = xfer->mem_stride; - xfer->num_lines = 1; - } - - /* - * Don't lock an arbitrary large number of pages, since that causes a - * DOS security hole. - */ - - if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) { - DRM_ERROR("Too large PCI DMA bitblt.\n"); - return -EINVAL; - } - - /* - * we allow a negative fb stride to allow flipping of images in - * transfer. - */ - - if (xfer->mem_stride < xfer->line_length || - abs(xfer->fb_stride) < xfer->line_length) { - DRM_ERROR("Invalid frame-buffer / memory stride.\n"); - return -EINVAL; - } - - /* - * A hardware bug seems to be worked around if system memory addresses start on - * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted - * about this. Meanwhile, impose the following restrictions: - */ - -#ifdef VIA_BUGFREE - if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) || - ((xfer->num_lines > 1) && ((xfer->mem_stride & 3) != (xfer->fb_stride & 3)))) { - DRM_ERROR("Invalid DRM bitblt alignment.\n"); - return -EINVAL; - } -#else - if ((((unsigned long)xfer->mem_addr & 15) || - ((unsigned long)xfer->fb_addr & 3)) || - ((xfer->num_lines > 1) && - ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) { - DRM_ERROR("Invalid DRM bitblt alignment.\n"); - return -EINVAL; - } -#endif - - if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) { - DRM_ERROR("Could not lock DMA pages.\n"); - via_free_sg_info(pdev, vsg); - return ret; - } - - via_map_blit_for_device(pdev, xfer, vsg, 0); - if (0 != (ret = via_alloc_desc_pages(vsg))) { - DRM_ERROR("Could not allocate DMA descriptor pages.\n"); - via_free_sg_info(pdev, vsg); - return ret; - } - via_map_blit_for_device(pdev, xfer, vsg, 1); - - return 0; -} - - -/* - * Reserve one free slot in the blit queue. Will wait for one second for one - * to become available. Otherwise -EBUSY is returned. - */ - -static int -via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine) -{ - int ret = 0; - unsigned long irqsave; - - DRM_DEBUG("Num free is %d\n", blitq->num_free); - spin_lock_irqsave(&blitq->blit_lock, irqsave); - while (blitq->num_free == 0) { - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - VIA_WAIT_ON(ret, blitq->busy_queue, HZ, blitq->num_free > 0); - if (ret) - return (-EINTR == ret) ? -EAGAIN : ret; - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - } - - blitq->num_free--; - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - return 0; -} - -/* - * Hand back a free slot if we changed our mind. - */ - -static void -via_dmablit_release_slot(drm_via_blitq_t *blitq) -{ - unsigned long irqsave; - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - blitq->num_free++; - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - wake_up(&blitq->busy_queue); -} - -/* - * Grab a free slot. Build blit info and queue a blit. - */ - - -static int -via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - drm_via_sg_info_t *vsg; - drm_via_blitq_t *blitq; - int ret; - int engine; - unsigned long irqsave; - - if (dev_priv == NULL) { - DRM_ERROR("Called without initialization.\n"); - return -EINVAL; - } - - engine = (xfer->to_fb) ? 0 : 1; - blitq = dev_priv->blit_queues + engine; - if (0 != (ret = via_dmablit_grab_slot(blitq, engine))) - return ret; - if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) { - via_dmablit_release_slot(blitq); - return -ENOMEM; - } - if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) { - via_dmablit_release_slot(blitq); - kfree(vsg); - return ret; - } - spin_lock_irqsave(&blitq->blit_lock, irqsave); - - blitq->blits[blitq->head++] = vsg; - if (blitq->head >= VIA_NUM_BLIT_SLOTS) - blitq->head = 0; - blitq->num_outstanding++; - xfer->sync.sync_handle = ++blitq->cur_blit_handle; - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - xfer->sync.engine = engine; - - via_dmablit_handler(dev, engine, 0); - - return 0; -} - -/* - * Sync on a previously submitted blit. Note that the X server use signals extensively, and - * that there is a very big probability that this IOCTL will be interrupted by a signal. In that - * case it returns with -EAGAIN for the signal to be delivered. - * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock(). - */ - -int -via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_blitsync_t *sync = data; - int err; - - if (sync->engine >= VIA_NUM_BLIT_ENGINES) - return -EINVAL; - - err = via_dmablit_sync(dev, sync->sync_handle, sync->engine); - - if (-EINTR == err) - err = -EAGAIN; - - return err; -} - - -/* - * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal - * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should - * be reissued. See the above IOCTL code. - */ - -int -via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_dmablit_t *xfer = data; - int err; - - err = via_dmablit(dev, xfer); - - return err; -} diff --git a/drivers/gpu/drm/via/via_dmablit.h b/drivers/gpu/drm/via/via_dmablit.h deleted file mode 100644 index 9b662a327cef..000000000000 --- a/drivers/gpu/drm/via/via_dmablit.h +++ /dev/null @@ -1,140 +0,0 @@ -/* via_dmablit.h -- PCI DMA BitBlt support for the VIA Unichrome/Pro - * - * Copyright 2005 Thomas Hellstrom. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE - * USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Hellstrom. - * Register info from Digeo Inc. - */ - -#ifndef _VIA_DMABLIT_H -#define _VIA_DMABLIT_H - -#include <linux/dma-mapping.h> - -#define VIA_NUM_BLIT_ENGINES 2 -#define VIA_NUM_BLIT_SLOTS 8 - -struct _drm_via_descriptor; - -typedef struct _drm_via_sg_info { - struct page **pages; - unsigned long num_pages; - struct _drm_via_descriptor **desc_pages; - int num_desc_pages; - int num_desc; - enum dma_data_direction direction; - unsigned char *bounce_buffer; - dma_addr_t chain_start; - uint32_t free_on_sequence; - unsigned int descriptors_per_page; - int aborted; - enum { - dr_via_device_mapped, - dr_via_desc_pages_alloc, - dr_via_pages_locked, - dr_via_pages_alloc, - dr_via_sg_init - } state; -} drm_via_sg_info_t; - -typedef struct _drm_via_blitq { - struct drm_device *dev; - uint32_t cur_blit_handle; - uint32_t done_blit_handle; - unsigned serviced; - unsigned head; - unsigned cur; - unsigned num_free; - unsigned num_outstanding; - unsigned long end; - int aborting; - int is_active; - drm_via_sg_info_t *blits[VIA_NUM_BLIT_SLOTS]; - spinlock_t blit_lock; - wait_queue_head_t blit_queue[VIA_NUM_BLIT_SLOTS]; - wait_queue_head_t busy_queue; - struct work_struct wq; - struct timer_list poll_timer; -} drm_via_blitq_t; - - -/* - * PCI DMA Registers - * Channels 2 & 3 don't seem to be implemented in hardware. - */ - -#define VIA_PCI_DMA_MAR0 0xE40 /* Memory Address Register of Channel 0 */ -#define VIA_PCI_DMA_DAR0 0xE44 /* Device Address Register of Channel 0 */ -#define VIA_PCI_DMA_BCR0 0xE48 /* Byte Count Register of Channel 0 */ -#define VIA_PCI_DMA_DPR0 0xE4C /* Descriptor Pointer Register of Channel 0 */ - -#define VIA_PCI_DMA_MAR1 0xE50 /* Memory Address Register of Channel 1 */ -#define VIA_PCI_DMA_DAR1 0xE54 /* Device Address Register of Channel 1 */ -#define VIA_PCI_DMA_BCR1 0xE58 /* Byte Count Register of Channel 1 */ -#define VIA_PCI_DMA_DPR1 0xE5C /* Descriptor Pointer Register of Channel 1 */ - -#define VIA_PCI_DMA_MAR2 0xE60 /* Memory Address Register of Channel 2 */ -#define VIA_PCI_DMA_DAR2 0xE64 /* Device Address Register of Channel 2 */ -#define VIA_PCI_DMA_BCR2 0xE68 /* Byte Count Register of Channel 2 */ -#define VIA_PCI_DMA_DPR2 0xE6C /* Descriptor Pointer Register of Channel 2 */ - -#define VIA_PCI_DMA_MAR3 0xE70 /* Memory Address Register of Channel 3 */ -#define VIA_PCI_DMA_DAR3 0xE74 /* Device Address Register of Channel 3 */ -#define VIA_PCI_DMA_BCR3 0xE78 /* Byte Count Register of Channel 3 */ -#define VIA_PCI_DMA_DPR3 0xE7C /* Descriptor Pointer Register of Channel 3 */ - -#define VIA_PCI_DMA_MR0 0xE80 /* Mode Register of Channel 0 */ -#define VIA_PCI_DMA_MR1 0xE84 /* Mode Register of Channel 1 */ -#define VIA_PCI_DMA_MR2 0xE88 /* Mode Register of Channel 2 */ -#define VIA_PCI_DMA_MR3 0xE8C /* Mode Register of Channel 3 */ - -#define VIA_PCI_DMA_CSR0 0xE90 /* Command/Status Register of Channel 0 */ -#define VIA_PCI_DMA_CSR1 0xE94 /* Command/Status Register of Channel 1 */ -#define VIA_PCI_DMA_CSR2 0xE98 /* Command/Status Register of Channel 2 */ -#define VIA_PCI_DMA_CSR3 0xE9C /* Command/Status Register of Channel 3 */ - -#define VIA_PCI_DMA_PTR 0xEA0 /* Priority Type Register */ - -/* Define for DMA engine */ -/* DPR */ -#define VIA_DMA_DPR_EC (1<<1) /* end of chain */ -#define VIA_DMA_DPR_DDIE (1<<2) /* descriptor done interrupt enable */ -#define VIA_DMA_DPR_DT (1<<3) /* direction of transfer (RO) */ - -/* MR */ -#define VIA_DMA_MR_CM (1<<0) /* chaining mode */ -#define VIA_DMA_MR_TDIE (1<<1) /* transfer done interrupt enable */ -#define VIA_DMA_MR_HENDMACMD (1<<7) /* ? */ - -/* CSR */ -#define VIA_DMA_CSR_DE (1<<0) /* DMA enable */ -#define VIA_DMA_CSR_TS (1<<1) /* transfer start */ -#define VIA_DMA_CSR_TA (1<<2) /* transfer abort */ -#define VIA_DMA_CSR_TD (1<<3) /* transfer done */ -#define VIA_DMA_CSR_DD (1<<4) /* descriptor done */ -#define VIA_DMA_DPR_EC (1<<1) /* end of chain */ - - - -#endif diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c deleted file mode 100644 index 5da38082821f..000000000000 --- a/drivers/gpu/drm/via/via_drv.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved. - * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * VIA, S3 GRAPHICS, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -#include <linux/module.h> -#include <linux/pci.h> - -#include <drm/drm_drv.h> -#include <drm/drm_file.h> -#include <drm/drm_pciids.h> -#include <drm/via_drm.h> - -#include "via_drv.h" - - -static int via_driver_open(struct drm_device *dev, struct drm_file *file) -{ - struct via_file_private *file_priv; - - DRM_DEBUG_DRIVER("\n"); - file_priv = kmalloc(sizeof(*file_priv), GFP_KERNEL); - if (!file_priv) - return -ENOMEM; - - file->driver_priv = file_priv; - - INIT_LIST_HEAD(&file_priv->obj_list); - - return 0; -} - -static void via_driver_postclose(struct drm_device *dev, struct drm_file *file) -{ - struct via_file_private *file_priv = file->driver_priv; - - kfree(file_priv); -} - -static struct pci_device_id pciidlist[] = { - viadrv_PCI_IDS -}; - -static const struct file_operations via_driver_fops = { - .owner = THIS_MODULE, - .open = drm_open, - .release = drm_release, - .unlocked_ioctl = drm_ioctl, - .mmap = drm_legacy_mmap, - .poll = drm_poll, - .compat_ioctl = drm_compat_ioctl, - .llseek = noop_llseek, -}; - -static struct drm_driver driver = { - .driver_features = - DRIVER_USE_AGP | DRIVER_HAVE_IRQ | DRIVER_LEGACY, - .load = via_driver_load, - .unload = via_driver_unload, - .open = via_driver_open, - .preclose = via_reclaim_buffers_locked, - .postclose = via_driver_postclose, - .context_dtor = via_final_context, - .get_vblank_counter = via_get_vblank_counter, - .enable_vblank = via_enable_vblank, - .disable_vblank = via_disable_vblank, - .irq_preinstall = via_driver_irq_preinstall, - .irq_postinstall = via_driver_irq_postinstall, - .irq_uninstall = via_driver_irq_uninstall, - .irq_handler = via_driver_irq_handler, - .dma_quiescent = via_driver_dma_quiescent, - .lastclose = via_lastclose, - .ioctls = via_ioctls, - .fops = &via_driver_fops, - .name = DRIVER_NAME, - .desc = DRIVER_DESC, - .date = DRIVER_DATE, - .major = DRIVER_MAJOR, - .minor = DRIVER_MINOR, - .patchlevel = DRIVER_PATCHLEVEL, -}; - -static struct pci_driver via_pci_driver = { - .name = DRIVER_NAME, - .id_table = pciidlist, -}; - -static int __init via_init(void) -{ - driver.num_ioctls = via_max_ioctl; - via_init_command_verifier(); - return drm_legacy_pci_init(&driver, &via_pci_driver); -} - -static void __exit via_exit(void) -{ - drm_legacy_pci_exit(&driver, &via_pci_driver); -} - -module_init(via_init); -module_exit(via_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL and additional rights"); diff --git a/drivers/gpu/drm/via/via_drv.h b/drivers/gpu/drm/via/via_drv.h deleted file mode 100644 index d5ad1b05bf77..000000000000 --- a/drivers/gpu/drm/via/via_drv.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved. - * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * VIA, S3 GRAPHICS, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ -#ifndef _VIA_DRV_H_ -#define _VIA_DRV_H_ - -#include <linux/irqreturn.h> -#include <linux/jiffies.h> -#include <linux/sched.h> -#include <linux/sched/signal.h> -#include <linux/wait.h> - -#include <drm/drm_ioctl.h> -#include <drm/drm_legacy.h> -#include <drm/drm_mm.h> -#include <drm/via_drm.h> - -#define DRIVER_AUTHOR "Various" - -#define DRIVER_NAME "via" -#define DRIVER_DESC "VIA Unichrome / Pro" -#define DRIVER_DATE "20070202" - -#define DRIVER_MAJOR 2 -#define DRIVER_MINOR 11 -#define DRIVER_PATCHLEVEL 1 - -#include "via_verifier.h" - -#include "via_dmablit.h" - -#define VIA_PCI_BUF_SIZE 60000 -#define VIA_FIRE_BUF_SIZE 1024 -#define VIA_NUM_IRQS 4 - -typedef struct drm_via_ring_buffer { - drm_local_map_t map; - char *virtual_start; -} drm_via_ring_buffer_t; - -typedef uint32_t maskarray_t[5]; - -typedef struct drm_via_irq { - atomic_t irq_received; - uint32_t pending_mask; - uint32_t enable_mask; - wait_queue_head_t irq_queue; -} drm_via_irq_t; - -typedef struct drm_via_private { - drm_via_sarea_t *sarea_priv; - drm_local_map_t *sarea; - drm_local_map_t *fb; - drm_local_map_t *mmio; - unsigned long agpAddr; - wait_queue_head_t decoder_queue[VIA_NR_XVMC_LOCKS]; - char *dma_ptr; - unsigned int dma_low; - unsigned int dma_high; - unsigned int dma_offset; - uint32_t dma_wrap; - volatile uint32_t *last_pause_ptr; - volatile uint32_t *hw_addr_ptr; - drm_via_ring_buffer_t ring; - ktime_t last_vblank; - int last_vblank_valid; - ktime_t nsec_per_vblank; - atomic_t vbl_received; - drm_via_state_t hc_state; - char pci_buf[VIA_PCI_BUF_SIZE]; - const uint32_t *fire_offsets[VIA_FIRE_BUF_SIZE]; - uint32_t num_fire_offsets; - int chipset; - drm_via_irq_t via_irqs[VIA_NUM_IRQS]; - unsigned num_irqs; - maskarray_t *irq_masks; - uint32_t irq_enable_mask; - uint32_t irq_pending_mask; - int *irq_map; - unsigned int idle_fault; - int vram_initialized; - struct drm_mm vram_mm; - int agp_initialized; - struct drm_mm agp_mm; - /** Mapping of userspace keys to mm objects */ - struct idr object_idr; - unsigned long vram_offset; - unsigned long agp_offset; - drm_via_blitq_t blit_queues[VIA_NUM_BLIT_ENGINES]; - uint32_t dma_diff; -} drm_via_private_t; - -struct via_file_private { - struct list_head obj_list; -}; - -enum via_family { - VIA_OTHER = 0, /* Baseline */ - VIA_PRO_GROUP_A, /* Another video engine and DMA commands */ - VIA_DX9_0 /* Same video as pro_group_a, but 3D is unsupported */ -}; - -/* VIA MMIO register access */ -static inline u32 via_read(struct drm_via_private *dev_priv, u32 reg) -{ - return readl((void __iomem *)(dev_priv->mmio->handle + reg)); -} - -static inline void via_write(struct drm_via_private *dev_priv, u32 reg, - u32 val) -{ - writel(val, (void __iomem *)(dev_priv->mmio->handle + reg)); -} - -static inline void via_write8(struct drm_via_private *dev_priv, u32 reg, - u32 val) -{ - writeb(val, (void __iomem *)(dev_priv->mmio->handle + reg)); -} - -static inline void via_write8_mask(struct drm_via_private *dev_priv, - u32 reg, u32 mask, u32 val) -{ - u32 tmp; - - tmp = readb((void __iomem *)(dev_priv->mmio->handle + reg)); - tmp = (tmp & ~mask) | (val & mask); - writeb(tmp, (void __iomem *)(dev_priv->mmio->handle + reg)); -} - -/* - * Poll in a loop waiting for 'contidition' to be true. - * Note: A direct replacement with wait_event_interruptible_timeout() - * will not work unless driver is updated to emit wake_up() - * in relevant places that can impact the 'condition' - * - * Returns: - * ret keeps current value if 'condition' becomes true - * ret = -BUSY if timeout happens - * ret = -EINTR if a signal interrupted the waiting period - */ -#define VIA_WAIT_ON( ret, queue, timeout, condition ) \ -do { \ - DECLARE_WAITQUEUE(entry, current); \ - unsigned long end = jiffies + (timeout); \ - add_wait_queue(&(queue), &entry); \ - \ - for (;;) { \ - __set_current_state(TASK_INTERRUPTIBLE); \ - if (condition) \ - break; \ - if (time_after_eq(jiffies, end)) { \ - ret = -EBUSY; \ - break; \ - } \ - schedule_timeout((HZ/100 > 1) ? HZ/100 : 1); \ - if (signal_pending(current)) { \ - ret = -EINTR; \ - break; \ - } \ - } \ - __set_current_state(TASK_RUNNING); \ - remove_wait_queue(&(queue), &entry); \ -} while (0) - -extern const struct drm_ioctl_desc via_ioctls[]; -extern int via_max_ioctl; - -extern int via_fb_init(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int via_mem_alloc(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int via_mem_free(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int via_agp_init(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int via_map_init(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int via_decoder_futex(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int via_wait_irq(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv); - -extern int via_driver_load(struct drm_device *dev, unsigned long chipset); -extern void via_driver_unload(struct drm_device *dev); - -extern int via_init_context(struct drm_device *dev, int context); -extern int via_final_context(struct drm_device *dev, int context); - -extern int via_do_cleanup_map(struct drm_device *dev); -extern u32 via_get_vblank_counter(struct drm_device *dev, unsigned int pipe); -extern int via_enable_vblank(struct drm_device *dev, unsigned int pipe); -extern void via_disable_vblank(struct drm_device *dev, unsigned int pipe); - -extern irqreturn_t via_driver_irq_handler(int irq, void *arg); -extern void via_driver_irq_preinstall(struct drm_device *dev); -extern int via_driver_irq_postinstall(struct drm_device *dev); -extern void via_driver_irq_uninstall(struct drm_device *dev); - -extern int via_dma_cleanup(struct drm_device *dev); -extern void via_init_command_verifier(void); -extern int via_driver_dma_quiescent(struct drm_device *dev); -extern void via_init_futex(drm_via_private_t *dev_priv); -extern void via_cleanup_futex(drm_via_private_t *dev_priv); -extern void via_release_futex(drm_via_private_t *dev_priv, int context); - -extern void via_reclaim_buffers_locked(struct drm_device *dev, - struct drm_file *file_priv); -extern void via_lastclose(struct drm_device *dev); - -extern void via_dmablit_handler(struct drm_device *dev, int engine, int from_irq); -extern void via_init_dmablit(struct drm_device *dev); - -#endif diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c deleted file mode 100644 index faeae5d881fb..000000000000 --- a/drivers/gpu/drm/via/via_irq.c +++ /dev/null @@ -1,388 +0,0 @@ -/* via_irq.c - * - * Copyright 2004 BEAM Ltd. - * Copyright 2002 Tungsten Graphics, Inc. - * Copyright 2005 Thomas Hellstrom. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * BEAM LTD, TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Authors: - * Terry Barnaby <terry1@beam.ltd.uk> - * Keith Whitwell <keith@tungstengraphics.com> - * Thomas Hellstrom <unichrome@shipmail.org> - * - * This code provides standard DRM access to the Via Unichrome / Pro Vertical blank - * interrupt, as well as an infrastructure to handle other interrupts of the chip. - * The refresh rate is also calculated for video playback sync purposes. - */ - -#include <drm/drm_device.h> -#include <drm/drm_vblank.h> -#include <drm/via_drm.h> - -#include "via_drv.h" - -#define VIA_REG_INTERRUPT 0x200 - -/* VIA_REG_INTERRUPT */ -#define VIA_IRQ_GLOBAL (1 << 31) -#define VIA_IRQ_VBLANK_ENABLE (1 << 19) -#define VIA_IRQ_VBLANK_PENDING (1 << 3) -#define VIA_IRQ_HQV0_ENABLE (1 << 11) -#define VIA_IRQ_HQV1_ENABLE (1 << 25) -#define VIA_IRQ_HQV0_PENDING (1 << 9) -#define VIA_IRQ_HQV1_PENDING (1 << 10) -#define VIA_IRQ_DMA0_DD_ENABLE (1 << 20) -#define VIA_IRQ_DMA0_TD_ENABLE (1 << 21) -#define VIA_IRQ_DMA1_DD_ENABLE (1 << 22) -#define VIA_IRQ_DMA1_TD_ENABLE (1 << 23) -#define VIA_IRQ_DMA0_DD_PENDING (1 << 4) -#define VIA_IRQ_DMA0_TD_PENDING (1 << 5) -#define VIA_IRQ_DMA1_DD_PENDING (1 << 6) -#define VIA_IRQ_DMA1_TD_PENDING (1 << 7) - - -/* - * Device-specific IRQs go here. This type might need to be extended with - * the register if there are multiple IRQ control registers. - * Currently we activate the HQV interrupts of Unichrome Pro group A. - */ - -static maskarray_t via_pro_group_a_irqs[] = { - {VIA_IRQ_HQV0_ENABLE, VIA_IRQ_HQV0_PENDING, 0x000003D0, 0x00008010, - 0x00000000 }, - {VIA_IRQ_HQV1_ENABLE, VIA_IRQ_HQV1_PENDING, 0x000013D0, 0x00008010, - 0x00000000 }, - {VIA_IRQ_DMA0_TD_ENABLE, VIA_IRQ_DMA0_TD_PENDING, VIA_PCI_DMA_CSR0, - VIA_DMA_CSR_TA | VIA_DMA_CSR_TD, 0x00000008}, - {VIA_IRQ_DMA1_TD_ENABLE, VIA_IRQ_DMA1_TD_PENDING, VIA_PCI_DMA_CSR1, - VIA_DMA_CSR_TA | VIA_DMA_CSR_TD, 0x00000008}, -}; -static int via_num_pro_group_a = ARRAY_SIZE(via_pro_group_a_irqs); -static int via_irqmap_pro_group_a[] = {0, 1, -1, 2, -1, 3}; - -static maskarray_t via_unichrome_irqs[] = { - {VIA_IRQ_DMA0_TD_ENABLE, VIA_IRQ_DMA0_TD_PENDING, VIA_PCI_DMA_CSR0, - VIA_DMA_CSR_TA | VIA_DMA_CSR_TD, 0x00000008}, - {VIA_IRQ_DMA1_TD_ENABLE, VIA_IRQ_DMA1_TD_PENDING, VIA_PCI_DMA_CSR1, - VIA_DMA_CSR_TA | VIA_DMA_CSR_TD, 0x00000008} -}; -static int via_num_unichrome = ARRAY_SIZE(via_unichrome_irqs); -static int via_irqmap_unichrome[] = {-1, -1, -1, 0, -1, 1}; - - -u32 via_get_vblank_counter(struct drm_device *dev, unsigned int pipe) -{ - drm_via_private_t *dev_priv = dev->dev_private; - - if (pipe != 0) - return 0; - - return atomic_read(&dev_priv->vbl_received); -} - -irqreturn_t via_driver_irq_handler(int irq, void *arg) -{ - struct drm_device *dev = (struct drm_device *) arg; - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - u32 status; - int handled = 0; - ktime_t cur_vblank; - drm_via_irq_t *cur_irq = dev_priv->via_irqs; - int i; - - status = via_read(dev_priv, VIA_REG_INTERRUPT); - if (status & VIA_IRQ_VBLANK_PENDING) { - atomic_inc(&dev_priv->vbl_received); - if (!(atomic_read(&dev_priv->vbl_received) & 0x0F)) { - cur_vblank = ktime_get(); - if (dev_priv->last_vblank_valid) { - dev_priv->nsec_per_vblank = - ktime_sub(cur_vblank, - dev_priv->last_vblank) >> 4; - } - dev_priv->last_vblank = cur_vblank; - dev_priv->last_vblank_valid = 1; - } - if (!(atomic_read(&dev_priv->vbl_received) & 0xFF)) { - DRM_DEBUG("nsec per vblank is: %llu\n", - ktime_to_ns(dev_priv->nsec_per_vblank)); - } - drm_handle_vblank(dev, 0); - handled = 1; - } - - for (i = 0; i < dev_priv->num_irqs; ++i) { - if (status & cur_irq->pending_mask) { - atomic_inc(&cur_irq->irq_received); - wake_up(&cur_irq->irq_queue); - handled = 1; - if (dev_priv->irq_map[drm_via_irq_dma0_td] == i) - via_dmablit_handler(dev, 0, 1); - else if (dev_priv->irq_map[drm_via_irq_dma1_td] == i) - via_dmablit_handler(dev, 1, 1); - } - cur_irq++; - } - - /* Acknowledge interrupts */ - via_write(dev_priv, VIA_REG_INTERRUPT, status); - - - if (handled) - return IRQ_HANDLED; - else - return IRQ_NONE; -} - -static __inline__ void viadrv_acknowledge_irqs(drm_via_private_t *dev_priv) -{ - u32 status; - - if (dev_priv) { - /* Acknowledge interrupts */ - status = via_read(dev_priv, VIA_REG_INTERRUPT); - via_write(dev_priv, VIA_REG_INTERRUPT, status | - dev_priv->irq_pending_mask); - } -} - -int via_enable_vblank(struct drm_device *dev, unsigned int pipe) -{ - drm_via_private_t *dev_priv = dev->dev_private; - u32 status; - - if (pipe != 0) { - DRM_ERROR("%s: bad crtc %u\n", __func__, pipe); - return -EINVAL; - } - - status = via_read(dev_priv, VIA_REG_INTERRUPT); - via_write(dev_priv, VIA_REG_INTERRUPT, status | VIA_IRQ_VBLANK_ENABLE); - - via_write8(dev_priv, 0x83d4, 0x11); - via_write8_mask(dev_priv, 0x83d5, 0x30, 0x30); - - return 0; -} - -void via_disable_vblank(struct drm_device *dev, unsigned int pipe) -{ - drm_via_private_t *dev_priv = dev->dev_private; - u32 status; - - status = via_read(dev_priv, VIA_REG_INTERRUPT); - via_write(dev_priv, VIA_REG_INTERRUPT, status & ~VIA_IRQ_VBLANK_ENABLE); - - via_write8(dev_priv, 0x83d4, 0x11); - via_write8_mask(dev_priv, 0x83d5, 0x30, 0); - - if (pipe != 0) - DRM_ERROR("%s: bad crtc %u\n", __func__, pipe); -} - -static int -via_driver_irq_wait(struct drm_device *dev, unsigned int irq, int force_sequence, - unsigned int *sequence) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - unsigned int cur_irq_sequence; - drm_via_irq_t *cur_irq; - int ret = 0; - maskarray_t *masks; - int real_irq; - - DRM_DEBUG("\n"); - - if (!dev_priv) { - DRM_ERROR("called with no initialization\n"); - return -EINVAL; - } - - if (irq >= drm_via_irq_num) { - DRM_ERROR("Trying to wait on unknown irq %d\n", irq); - return -EINVAL; - } - - real_irq = dev_priv->irq_map[irq]; - - if (real_irq < 0) { - DRM_ERROR("Video IRQ %d not available on this hardware.\n", - irq); - return -EINVAL; - } - - masks = dev_priv->irq_masks; - cur_irq = dev_priv->via_irqs + real_irq; - - if (masks[real_irq][2] && !force_sequence) { - VIA_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ, - ((via_read(dev_priv, masks[irq][2]) & masks[irq][3]) == - masks[irq][4])); - cur_irq_sequence = atomic_read(&cur_irq->irq_received); - } else { - VIA_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ, - (((cur_irq_sequence = - atomic_read(&cur_irq->irq_received)) - - *sequence) <= (1 << 23))); - } - *sequence = cur_irq_sequence; - return ret; -} - - -/* - * drm_dma.h hooks - */ - -void via_driver_irq_preinstall(struct drm_device *dev) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - u32 status; - drm_via_irq_t *cur_irq; - int i; - - DRM_DEBUG("dev_priv: %p\n", dev_priv); - if (dev_priv) { - cur_irq = dev_priv->via_irqs; - - dev_priv->irq_enable_mask = VIA_IRQ_VBLANK_ENABLE; - dev_priv->irq_pending_mask = VIA_IRQ_VBLANK_PENDING; - - if (dev_priv->chipset == VIA_PRO_GROUP_A || - dev_priv->chipset == VIA_DX9_0) { - dev_priv->irq_masks = via_pro_group_a_irqs; - dev_priv->num_irqs = via_num_pro_group_a; - dev_priv->irq_map = via_irqmap_pro_group_a; - } else { - dev_priv->irq_masks = via_unichrome_irqs; - dev_priv->num_irqs = via_num_unichrome; - dev_priv->irq_map = via_irqmap_unichrome; - } - - for (i = 0; i < dev_priv->num_irqs; ++i) { - atomic_set(&cur_irq->irq_received, 0); - cur_irq->enable_mask = dev_priv->irq_masks[i][0]; - cur_irq->pending_mask = dev_priv->irq_masks[i][1]; - init_waitqueue_head(&cur_irq->irq_queue); - dev_priv->irq_enable_mask |= cur_irq->enable_mask; - dev_priv->irq_pending_mask |= cur_irq->pending_mask; - cur_irq++; - - DRM_DEBUG("Initializing IRQ %d\n", i); - } - - dev_priv->last_vblank_valid = 0; - - /* Clear VSync interrupt regs */ - status = via_read(dev_priv, VIA_REG_INTERRUPT); - via_write(dev_priv, VIA_REG_INTERRUPT, status & - ~(dev_priv->irq_enable_mask)); - - /* Clear bits if they're already high */ - viadrv_acknowledge_irqs(dev_priv); - } -} - -int via_driver_irq_postinstall(struct drm_device *dev) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - u32 status; - - DRM_DEBUG("fun: %s\n", __func__); - if (!dev_priv) - return -EINVAL; - - status = via_read(dev_priv, VIA_REG_INTERRUPT); - via_write(dev_priv, VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL - | dev_priv->irq_enable_mask); - - /* Some magic, oh for some data sheets ! */ - via_write8(dev_priv, 0x83d4, 0x11); - via_write8_mask(dev_priv, 0x83d5, 0x30, 0x30); - - return 0; -} - -void via_driver_irq_uninstall(struct drm_device *dev) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - u32 status; - - DRM_DEBUG("\n"); - if (dev_priv) { - - /* Some more magic, oh for some data sheets ! */ - - via_write8(dev_priv, 0x83d4, 0x11); - via_write8_mask(dev_priv, 0x83d5, 0x30, 0); - - status = via_read(dev_priv, VIA_REG_INTERRUPT); - via_write(dev_priv, VIA_REG_INTERRUPT, status & - ~(VIA_IRQ_VBLANK_ENABLE | dev_priv->irq_enable_mask)); - } -} - -int via_wait_irq(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_irqwait_t *irqwait = data; - struct timespec64 now; - int ret = 0; - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - drm_via_irq_t *cur_irq = dev_priv->via_irqs; - int force_sequence; - - if (irqwait->request.irq >= dev_priv->num_irqs) { - DRM_ERROR("Trying to wait on unknown irq %d\n", - irqwait->request.irq); - return -EINVAL; - } - - cur_irq += irqwait->request.irq; - - switch (irqwait->request.type & ~VIA_IRQ_FLAGS_MASK) { - case VIA_IRQ_RELATIVE: - irqwait->request.sequence += - atomic_read(&cur_irq->irq_received); - irqwait->request.type &= ~_DRM_VBLANK_RELATIVE; - break; - case VIA_IRQ_ABSOLUTE: - break; - default: - return -EINVAL; - } - - if (irqwait->request.type & VIA_IRQ_SIGNAL) { - DRM_ERROR("Signals on Via IRQs not implemented yet.\n"); - return -EINVAL; - } - - force_sequence = (irqwait->request.type & VIA_IRQ_FORCE_SEQUENCE); - - ret = via_driver_irq_wait(dev, irqwait->request.irq, force_sequence, - &irqwait->request.sequence); - ktime_get_ts64(&now); - irqwait->reply.tval_sec = now.tv_sec; - irqwait->reply.tval_usec = now.tv_nsec / NSEC_PER_USEC; - - return ret; -} diff --git a/drivers/gpu/drm/via/via_legacy.c b/drivers/gpu/drm/via/via_legacy.c new file mode 100644 index 000000000000..a900302947aa --- /dev/null +++ b/drivers/gpu/drm/via/via_legacy.c @@ -0,0 +1,3836 @@ +// SPDX-License-Identifier: MIT +/* + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sub license, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE AUTHOR(S), AND/OR THE COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/irqreturn.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/pagemap.h> +#include <linux/pci.h> +#include <linux/sched.h> +#include <linux/sched/signal.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <linux/vmalloc.h> +#include <linux/wait.h> + +#include <drm/drm.h> +#include <drm/drm_device.h> +#include <drm/drm_drv.h> +#include <drm/drm_ioctl.h> +#include <drm/drm_file.h> +#include <drm/drm_legacy.h> +#include <drm/drm_mm.h> +#include <drm/drm_pciids.h> +#include <drm/drm_vblank.h> +#include <drm/via_drm.h> + +#include "via_3d_reg.h" + +/* + * Legacy file: via_verifier.h + * + * Copyright 2004 The Unichrome Project. All Rights Reserved. + * + * Author: Thomas Hellström 2004. + */ + +typedef enum { + no_sequence = 0, + z_address, + dest_address, + tex_address +} drm_via_sequence_t; + +typedef struct { + unsigned texture; + uint32_t z_addr; + uint32_t d_addr; + uint32_t t_addr[2][10]; + uint32_t pitch[2][10]; + uint32_t height[2][10]; + uint32_t tex_level_lo[2]; + uint32_t tex_level_hi[2]; + uint32_t tex_palette_size[2]; + uint32_t tex_npot[2]; + drm_via_sequence_t unfinished; + int agp_texture; + int multitex; + struct drm_device *dev; + drm_local_map_t *map_cache; + uint32_t vertex_count; + int agp; + const uint32_t *buf_start; +} drm_via_state_t; + +extern int via_verify_command_stream(const uint32_t *buf, unsigned int size, + struct drm_device *dev, int agp); +extern int via_parse_command_stream(struct drm_device *dev, const uint32_t *buf, + unsigned int size); + +/* + * Legacy file: via_dmablit.h -- PCI DMA BitBlt support for the VIA Unichrome/Pro + * + * Copyright 2005 Thomas Hellstrom. + * All Rights Reserved. + * + * Authors: + * Thomas Hellstrom. + * Register info from Digeo Inc. + */ + +#define VIA_NUM_BLIT_ENGINES 2 +#define VIA_NUM_BLIT_SLOTS 8 + +struct _drm_via_descriptor; + +typedef struct _drm_via_sg_info { + struct page **pages; + unsigned long num_pages; + struct _drm_via_descriptor **desc_pages; + int num_desc_pages; + int num_desc; + enum dma_data_direction direction; + unsigned char *bounce_buffer; + dma_addr_t chain_start; + uint32_t free_on_sequence; + unsigned int descriptors_per_page; + int aborted; + enum { + dr_via_device_mapped, + dr_via_desc_pages_alloc, + dr_via_pages_locked, + dr_via_pages_alloc, + dr_via_sg_init + } state; +} drm_via_sg_info_t; + +typedef struct _drm_via_blitq { + struct drm_device *dev; + uint32_t cur_blit_handle; + uint32_t done_blit_handle; + unsigned serviced; + unsigned head; + unsigned cur; + unsigned num_free; + unsigned num_outstanding; + unsigned long end; + int aborting; + int is_active; + drm_via_sg_info_t *blits[VIA_NUM_BLIT_SLOTS]; + spinlock_t blit_lock; + wait_queue_head_t blit_queue[VIA_NUM_BLIT_SLOTS]; + wait_queue_head_t busy_queue; + struct work_struct wq; + struct timer_list poll_timer; +} drm_via_blitq_t; + + +/* + * PCI DMA Registers + * Channels 2 & 3 don't seem to be implemented in hardware. + */ + +#define VIA_PCI_DMA_MAR0 0xE40 /* Memory Address Register of Channel 0 */ +#define VIA_PCI_DMA_DAR0 0xE44 /* Device Address Register of Channel 0 */ +#define VIA_PCI_DMA_BCR0 0xE48 /* Byte Count Register of Channel 0 */ +#define VIA_PCI_DMA_DPR0 0xE4C /* Descriptor Pointer Register of Channel 0 */ + +#define VIA_PCI_DMA_MAR1 0xE50 /* Memory Address Register of Channel 1 */ +#define VIA_PCI_DMA_DAR1 0xE54 /* Device Address Register of Channel 1 */ +#define VIA_PCI_DMA_BCR1 0xE58 /* Byte Count Register of Channel 1 */ +#define VIA_PCI_DMA_DPR1 0xE5C /* Descriptor Pointer Register of Channel 1 */ + +#define VIA_PCI_DMA_MAR2 0xE60 /* Memory Address Register of Channel 2 */ +#define VIA_PCI_DMA_DAR2 0xE64 /* Device Address Register of Channel 2 */ +#define VIA_PCI_DMA_BCR2 0xE68 /* Byte Count Register of Channel 2 */ +#define VIA_PCI_DMA_DPR2 0xE6C /* Descriptor Pointer Register of Channel 2 */ + +#define VIA_PCI_DMA_MAR3 0xE70 /* Memory Address Register of Channel 3 */ +#define VIA_PCI_DMA_DAR3 0xE74 /* Device Address Register of Channel 3 */ +#define VIA_PCI_DMA_BCR3 0xE78 /* Byte Count Register of Channel 3 */ +#define VIA_PCI_DMA_DPR3 0xE7C /* Descriptor Pointer Register of Channel 3 */ + +#define VIA_PCI_DMA_MR0 0xE80 /* Mode Register of Channel 0 */ +#define VIA_PCI_DMA_MR1 0xE84 /* Mode Register of Channel 1 */ +#define VIA_PCI_DMA_MR2 0xE88 /* Mode Register of Channel 2 */ +#define VIA_PCI_DMA_MR3 0xE8C /* Mode Register of Channel 3 */ + +#define VIA_PCI_DMA_CSR0 0xE90 /* Command/Status Register of Channel 0 */ +#define VIA_PCI_DMA_CSR1 0xE94 /* Command/Status Register of Channel 1 */ +#define VIA_PCI_DMA_CSR2 0xE98 /* Command/Status Register of Channel 2 */ +#define VIA_PCI_DMA_CSR3 0xE9C /* Command/Status Register of Channel 3 */ + +#define VIA_PCI_DMA_PTR 0xEA0 /* Priority Type Register */ + +/* Define for DMA engine */ +/* DPR */ +#define VIA_DMA_DPR_EC (1<<1) /* end of chain */ +#define VIA_DMA_DPR_DDIE (1<<2) /* descriptor done interrupt enable */ +#define VIA_DMA_DPR_DT (1<<3) /* direction of transfer (RO) */ + +/* MR */ +#define VIA_DMA_MR_CM (1<<0) /* chaining mode */ +#define VIA_DMA_MR_TDIE (1<<1) /* transfer done interrupt enable */ +#define VIA_DMA_MR_HENDMACMD (1<<7) /* ? */ + +/* CSR */ +#define VIA_DMA_CSR_DE (1<<0) /* DMA enable */ +#define VIA_DMA_CSR_TS (1<<1) /* transfer start */ +#define VIA_DMA_CSR_TA (1<<2) /* transfer abort */ +#define VIA_DMA_CSR_TD (1<<3) /* transfer done */ +#define VIA_DMA_CSR_DD (1<<4) /* descriptor done */ +#define VIA_DMA_DPR_EC (1<<1) /* end of chain */ + +/* + * Legacy file: via_drv.h + * + * Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved. + */ + +#define DRIVER_AUTHOR "Various" + +#define DRIVER_NAME "via" +#define DRIVER_DESC "VIA Unichrome / Pro" +#define DRIVER_DATE "20070202" + +#define DRIVER_MAJOR 2 +#define DRIVER_MINOR 11 +#define DRIVER_PATCHLEVEL 1 + +#define VIA_PCI_BUF_SIZE 60000 +#define VIA_FIRE_BUF_SIZE 1024 +#define VIA_NUM_IRQS 4 + +typedef struct drm_via_ring_buffer { + drm_local_map_t map; + char *virtual_start; +} drm_via_ring_buffer_t; + +typedef uint32_t maskarray_t[5]; + +typedef struct drm_via_irq { + atomic_t irq_received; + uint32_t pending_mask; + uint32_t enable_mask; + wait_queue_head_t irq_queue; +} drm_via_irq_t; + +typedef struct drm_via_private { + drm_via_sarea_t *sarea_priv; + drm_local_map_t *sarea; + drm_local_map_t *fb; + drm_local_map_t *mmio; + unsigned long agpAddr; + wait_queue_head_t decoder_queue[VIA_NR_XVMC_LOCKS]; + char *dma_ptr; + unsigned int dma_low; + unsigned int dma_high; + unsigned int dma_offset; + uint32_t dma_wrap; + volatile uint32_t *last_pause_ptr; + volatile uint32_t *hw_addr_ptr; + drm_via_ring_buffer_t ring; + ktime_t last_vblank; + int last_vblank_valid; + ktime_t nsec_per_vblank; + atomic_t vbl_received; + drm_via_state_t hc_state; + char pci_buf[VIA_PCI_BUF_SIZE]; + const uint32_t *fire_offsets[VIA_FIRE_BUF_SIZE]; + uint32_t num_fire_offsets; + int chipset; + drm_via_irq_t via_irqs[VIA_NUM_IRQS]; + unsigned num_irqs; + maskarray_t *irq_masks; + uint32_t irq_enable_mask; + uint32_t irq_pending_mask; + int *irq_map; + unsigned int idle_fault; + int vram_initialized; + struct drm_mm vram_mm; + int agp_initialized; + struct drm_mm agp_mm; + /** Mapping of userspace keys to mm objects */ + struct idr object_idr; + unsigned long vram_offset; + unsigned long agp_offset; + drm_via_blitq_t blit_queues[VIA_NUM_BLIT_ENGINES]; + uint32_t dma_diff; +} drm_via_private_t; + +struct via_file_private { + struct list_head obj_list; +}; + +enum via_family { + VIA_OTHER = 0, /* Baseline */ + VIA_PRO_GROUP_A, /* Another video engine and DMA commands */ + VIA_DX9_0 /* Same video as pro_group_a, but 3D is unsupported */ +}; + +/* VIA MMIO register access */ +static inline u32 via_read(struct drm_via_private *dev_priv, u32 reg) +{ + return readl((void __iomem *)(dev_priv->mmio->handle + reg)); +} + +static inline void via_write(struct drm_via_private *dev_priv, u32 reg, + u32 val) +{ + writel(val, (void __iomem *)(dev_priv->mmio->handle + reg)); +} + +static inline void via_write8(struct drm_via_private *dev_priv, u32 reg, + u32 val) +{ + writeb(val, (void __iomem *)(dev_priv->mmio->handle + reg)); +} + +static inline void via_write8_mask(struct drm_via_private *dev_priv, + u32 reg, u32 mask, u32 val) +{ + u32 tmp; + + tmp = readb((void __iomem *)(dev_priv->mmio->handle + reg)); + tmp = (tmp & ~mask) | (val & mask); + writeb(tmp, (void __iomem *)(dev_priv->mmio->handle + reg)); +} + +/* + * Poll in a loop waiting for 'contidition' to be true. + * Note: A direct replacement with wait_event_interruptible_timeout() + * will not work unless driver is updated to emit wake_up() + * in relevant places that can impact the 'condition' + * + * Returns: + * ret keeps current value if 'condition' becomes true + * ret = -BUSY if timeout happens + * ret = -EINTR if a signal interrupted the waiting period + */ +#define VIA_WAIT_ON( ret, queue, timeout, condition ) \ +do { \ + DECLARE_WAITQUEUE(entry, current); \ + unsigned long end = jiffies + (timeout); \ + add_wait_queue(&(queue), &entry); \ + \ + for (;;) { \ + __set_current_state(TASK_INTERRUPTIBLE); \ + if (condition) \ + break; \ + if (time_after_eq(jiffies, end)) { \ + ret = -EBUSY; \ + break; \ + } \ + schedule_timeout((HZ/100 > 1) ? HZ/100 : 1); \ + if (signal_pending(current)) { \ + ret = -EINTR; \ + break; \ + } \ + } \ + __set_current_state(TASK_RUNNING); \ + remove_wait_queue(&(queue), &entry); \ +} while (0) + +extern const struct drm_ioctl_desc via_ioctls[]; +extern int via_max_ioctl; + +extern int via_fb_init(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int via_mem_alloc(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int via_mem_free(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int via_agp_init(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int via_map_init(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int via_decoder_futex(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int via_wait_irq(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv); +extern int via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv); + +extern int via_driver_load(struct drm_device *dev, unsigned long chipset); +extern void via_driver_unload(struct drm_device *dev); + +extern int via_init_context(struct drm_device *dev, int context); +extern int via_final_context(struct drm_device *dev, int context); + +extern int via_do_cleanup_map(struct drm_device *dev); +extern u32 via_get_vblank_counter(struct drm_device *dev, unsigned int pipe); +extern int via_enable_vblank(struct drm_device *dev, unsigned int pipe); +extern void via_disable_vblank(struct drm_device *dev, unsigned int pipe); + +extern irqreturn_t via_driver_irq_handler(int irq, void *arg); +extern void via_driver_irq_preinstall(struct drm_device *dev); +extern int via_driver_irq_postinstall(struct drm_device *dev); +extern void via_driver_irq_uninstall(struct drm_device *dev); + +extern int via_dma_cleanup(struct drm_device *dev); +extern void via_init_command_verifier(void); +extern int via_driver_dma_quiescent(struct drm_device *dev); +extern void via_init_futex(drm_via_private_t *dev_priv); +extern void via_cleanup_futex(drm_via_private_t *dev_priv); +extern void via_release_futex(drm_via_private_t *dev_priv, int context); + +extern void via_reclaim_buffers_locked(struct drm_device *dev, + struct drm_file *file_priv); +extern void via_lastclose(struct drm_device *dev); + +extern void via_dmablit_handler(struct drm_device *dev, int engine, int from_irq); +extern void via_init_dmablit(struct drm_device *dev); + +/* + * via_dma.c -- DMA support for the VIA Unichrome/Pro + * + * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. + * All Rights Reserved. + * + * Copyright 2004 Digeo, Inc., Palo Alto, CA, U.S.A. + * All Rights Reserved. + * + * Copyright 2004 The Unichrome project. + * All Rights Reserved. + * + * Authors: + * Tungsten Graphics, + * Erdi Chen, + * Thomas Hellstrom. + */ + +#define CMDBUF_ALIGNMENT_SIZE (0x100) +#define CMDBUF_ALIGNMENT_MASK (0x0ff) + +/* defines for VIA 3D registers */ +#define VIA_REG_STATUS 0x400 +#define VIA_REG_TRANSET 0x43C +#define VIA_REG_TRANSPACE 0x440 + +/* VIA_REG_STATUS(0x400): Engine Status */ +#define VIA_CMD_RGTR_BUSY 0x00000080 /* Command Regulator is busy */ +#define VIA_2D_ENG_BUSY 0x00000001 /* 2D Engine is busy */ +#define VIA_3D_ENG_BUSY 0x00000002 /* 3D Engine is busy */ +#define VIA_VR_QUEUE_BUSY 0x00020000 /* Virtual Queue is busy */ + +#define SetReg2DAGP(nReg, nData) { \ + *((uint32_t *)(vb)) = ((nReg) >> 2) | HALCYON_HEADER1; \ + *((uint32_t *)(vb) + 1) = (nData); \ + vb = ((uint32_t *)vb) + 2; \ + dev_priv->dma_low += 8; \ +} + +#define via_flush_write_combine() mb() + +#define VIA_OUT_RING_QW(w1, w2) do { \ + *vb++ = (w1); \ + *vb++ = (w2); \ + dev_priv->dma_low += 8; \ +} while (0) + +static void via_cmdbuf_start(drm_via_private_t *dev_priv); +static void via_cmdbuf_pause(drm_via_private_t *dev_priv); +static void via_cmdbuf_reset(drm_via_private_t *dev_priv); +static void via_cmdbuf_rewind(drm_via_private_t *dev_priv); +static int via_wait_idle(drm_via_private_t *dev_priv); +static void via_pad_cache(drm_via_private_t *dev_priv, int qwords); + +/* + * Free space in command buffer. + */ + +static uint32_t via_cmdbuf_space(drm_via_private_t *dev_priv) +{ + uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; + uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base; + + return ((hw_addr <= dev_priv->dma_low) ? + (dev_priv->dma_high + hw_addr - dev_priv->dma_low) : + (hw_addr - dev_priv->dma_low)); +} + +/* + * How much does the command regulator lag behind? + */ + +static uint32_t via_cmdbuf_lag(drm_via_private_t *dev_priv) +{ + uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; + uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base; + + return ((hw_addr <= dev_priv->dma_low) ? + (dev_priv->dma_low - hw_addr) : + (dev_priv->dma_wrap + dev_priv->dma_low - hw_addr)); +} + +/* + * Check that the given size fits in the buffer, otherwise wait. + */ + +static inline int +via_cmdbuf_wait(drm_via_private_t *dev_priv, unsigned int size) +{ + uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; + uint32_t cur_addr, hw_addr, next_addr; + volatile uint32_t *hw_addr_ptr; + uint32_t count; + hw_addr_ptr = dev_priv->hw_addr_ptr; + cur_addr = dev_priv->dma_low; + next_addr = cur_addr + size + 512 * 1024; + count = 1000000; + do { + hw_addr = *hw_addr_ptr - agp_base; + if (count-- == 0) { + DRM_ERROR + ("via_cmdbuf_wait timed out hw %x cur_addr %x next_addr %x\n", + hw_addr, cur_addr, next_addr); + return -1; + } + if ((cur_addr < hw_addr) && (next_addr >= hw_addr)) + msleep(1); + } while ((cur_addr < hw_addr) && (next_addr >= hw_addr)); + return 0; +} + +/* + * Checks whether buffer head has reach the end. Rewind the ring buffer + * when necessary. + * + * Returns virtual pointer to ring buffer. + */ + +static inline uint32_t *via_check_dma(drm_via_private_t * dev_priv, + unsigned int size) +{ + if ((dev_priv->dma_low + size + 4 * CMDBUF_ALIGNMENT_SIZE) > + dev_priv->dma_high) { + via_cmdbuf_rewind(dev_priv); + } + if (via_cmdbuf_wait(dev_priv, size) != 0) + return NULL; + + return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low); +} + +int via_dma_cleanup(struct drm_device *dev) +{ + if (dev->dev_private) { + drm_via_private_t *dev_priv = + (drm_via_private_t *) dev->dev_private; + + if (dev_priv->ring.virtual_start) { + via_cmdbuf_reset(dev_priv); + + drm_legacy_ioremapfree(&dev_priv->ring.map, dev); + dev_priv->ring.virtual_start = NULL; + } + + } + + return 0; +} + +static int via_initialize(struct drm_device *dev, + drm_via_private_t *dev_priv, + drm_via_dma_init_t *init) +{ + if (!dev_priv || !dev_priv->mmio) { + DRM_ERROR("via_dma_init called before via_map_init\n"); + return -EFAULT; + } + + if (dev_priv->ring.virtual_start != NULL) { + DRM_ERROR("called again without calling cleanup\n"); + return -EFAULT; + } + + if (!dev->agp || !dev->agp->base) { + DRM_ERROR("called with no agp memory available\n"); + return -EFAULT; + } + + if (dev_priv->chipset == VIA_DX9_0) { + DRM_ERROR("AGP DMA is not supported on this chip\n"); + return -EINVAL; + } + + dev_priv->ring.map.offset = dev->agp->base + init->offset; + dev_priv->ring.map.size = init->size; + dev_priv->ring.map.type = 0; + dev_priv->ring.map.flags = 0; + dev_priv->ring.map.mtrr = 0; + + drm_legacy_ioremap(&dev_priv->ring.map, dev); + + if (dev_priv->ring.map.handle == NULL) { + via_dma_cleanup(dev); + DRM_ERROR("can not ioremap virtual address for" + " ring buffer\n"); + return -ENOMEM; + } + + dev_priv->ring.virtual_start = dev_priv->ring.map.handle; + + dev_priv->dma_ptr = dev_priv->ring.virtual_start; + dev_priv->dma_low = 0; + dev_priv->dma_high = init->size; + dev_priv->dma_wrap = init->size; + dev_priv->dma_offset = init->offset; + dev_priv->last_pause_ptr = NULL; + dev_priv->hw_addr_ptr = + (volatile uint32_t *)((char *)dev_priv->mmio->handle + + init->reg_pause_addr); + + via_cmdbuf_start(dev_priv); + + return 0; +} + +static int via_dma_init(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + drm_via_dma_init_t *init = data; + int retcode = 0; + + switch (init->func) { + case VIA_INIT_DMA: + if (!capable(CAP_SYS_ADMIN)) + retcode = -EPERM; + else + retcode = via_initialize(dev, dev_priv, init); + break; + case VIA_CLEANUP_DMA: + if (!capable(CAP_SYS_ADMIN)) + retcode = -EPERM; + else + retcode = via_dma_cleanup(dev); + break; + case VIA_DMA_INITIALIZED: + retcode = (dev_priv->ring.virtual_start != NULL) ? + 0 : -EFAULT; + break; + default: + retcode = -EINVAL; + break; + } + + return retcode; +} + +static int via_dispatch_cmdbuffer(struct drm_device *dev, drm_via_cmdbuffer_t *cmd) +{ + drm_via_private_t *dev_priv; + uint32_t *vb; + int ret; + + dev_priv = (drm_via_private_t *) dev->dev_private; + + if (dev_priv->ring.virtual_start == NULL) { + DRM_ERROR("called without initializing AGP ring buffer.\n"); + return -EFAULT; + } + + if (cmd->size > VIA_PCI_BUF_SIZE) + return -ENOMEM; + + if (copy_from_user(dev_priv->pci_buf, cmd->buf, cmd->size)) + return -EFAULT; + + /* + * Running this function on AGP memory is dead slow. Therefore + * we run it on a temporary cacheable system memory buffer and + * copy it to AGP memory when ready. + */ + + if ((ret = + via_verify_command_stream((uint32_t *) dev_priv->pci_buf, + cmd->size, dev, 1))) { + return ret; + } + + vb = via_check_dma(dev_priv, (cmd->size < 0x100) ? 0x102 : cmd->size); + if (vb == NULL) + return -EAGAIN; + + memcpy(vb, dev_priv->pci_buf, cmd->size); + + dev_priv->dma_low += cmd->size; + + /* + * Small submissions somehow stalls the CPU. (AGP cache effects?) + * pad to greater size. + */ + + if (cmd->size < 0x100) + via_pad_cache(dev_priv, (0x100 - cmd->size) >> 3); + via_cmdbuf_pause(dev_priv); + + return 0; +} + +int via_driver_dma_quiescent(struct drm_device *dev) +{ + drm_via_private_t *dev_priv = dev->dev_private; + + if (!via_wait_idle(dev_priv)) + return -EBUSY; + return 0; +} + +static int via_flush_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + + LOCK_TEST_WITH_RETURN(dev, file_priv); + + return via_driver_dma_quiescent(dev); +} + +static int via_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_cmdbuffer_t *cmdbuf = data; + int ret; + + LOCK_TEST_WITH_RETURN(dev, file_priv); + + DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size); + + ret = via_dispatch_cmdbuffer(dev, cmdbuf); + return ret; +} + +static int via_dispatch_pci_cmdbuffer(struct drm_device *dev, + drm_via_cmdbuffer_t *cmd) +{ + drm_via_private_t *dev_priv = dev->dev_private; + int ret; + + if (cmd->size > VIA_PCI_BUF_SIZE) + return -ENOMEM; + if (copy_from_user(dev_priv->pci_buf, cmd->buf, cmd->size)) + return -EFAULT; + + if ((ret = + via_verify_command_stream((uint32_t *) dev_priv->pci_buf, + cmd->size, dev, 0))) { + return ret; + } + + ret = + via_parse_command_stream(dev, (const uint32_t *)dev_priv->pci_buf, + cmd->size); + return ret; +} + +static int via_pci_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_cmdbuffer_t *cmdbuf = data; + int ret; + + LOCK_TEST_WITH_RETURN(dev, file_priv); + + DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size); + + ret = via_dispatch_pci_cmdbuffer(dev, cmdbuf); + return ret; +} + +static inline uint32_t *via_align_buffer(drm_via_private_t *dev_priv, + uint32_t * vb, int qw_count) +{ + for (; qw_count > 0; --qw_count) + VIA_OUT_RING_QW(HC_DUMMY, HC_DUMMY); + return vb; +} + +/* + * This function is used internally by ring buffer management code. + * + * Returns virtual pointer to ring buffer. + */ +static inline uint32_t *via_get_dma(drm_via_private_t *dev_priv) +{ + return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low); +} + +/* + * Hooks a segment of data into the tail of the ring-buffer by + * modifying the pause address stored in the buffer itself. If + * the regulator has already paused, restart it. + */ +static int via_hook_segment(drm_via_private_t *dev_priv, + uint32_t pause_addr_hi, uint32_t pause_addr_lo, + int no_pci_fire) +{ + int paused, count; + volatile uint32_t *paused_at = dev_priv->last_pause_ptr; + uint32_t reader, ptr; + uint32_t diff; + + paused = 0; + via_flush_write_combine(); + (void) *(volatile uint32_t *)(via_get_dma(dev_priv) - 1); + + *paused_at = pause_addr_lo; + via_flush_write_combine(); + (void) *paused_at; + + reader = *(dev_priv->hw_addr_ptr); + ptr = ((volatile char *)paused_at - dev_priv->dma_ptr) + + dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; + + dev_priv->last_pause_ptr = via_get_dma(dev_priv) - 1; + + /* + * If there is a possibility that the command reader will + * miss the new pause address and pause on the old one, + * In that case we need to program the new start address + * using PCI. + */ + + diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; + count = 10000000; + while (diff == 0 && count--) { + paused = (via_read(dev_priv, 0x41c) & 0x80000000); + if (paused) + break; + reader = *(dev_priv->hw_addr_ptr); + diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; + } + + paused = via_read(dev_priv, 0x41c) & 0x80000000; + + if (paused && !no_pci_fire) { + reader = *(dev_priv->hw_addr_ptr); + diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; + diff &= (dev_priv->dma_high - 1); + if (diff != 0 && diff < (dev_priv->dma_high >> 1)) { + DRM_ERROR("Paused at incorrect address. " + "0x%08x, 0x%08x 0x%08x\n", + ptr, reader, dev_priv->dma_diff); + } else if (diff == 0) { + /* + * There is a concern that these writes may stall the PCI bus + * if the GPU is not idle. However, idling the GPU first + * doesn't make a difference. + */ + + via_write(dev_priv, VIA_REG_TRANSET, (HC_ParaType_PreCR << 16)); + via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_hi); + via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_lo); + via_read(dev_priv, VIA_REG_TRANSPACE); + } + } + return paused; +} + +static int via_wait_idle(drm_via_private_t *dev_priv) +{ + int count = 10000000; + + while (!(via_read(dev_priv, VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && --count) + ; + + while (count && (via_read(dev_priv, VIA_REG_STATUS) & + (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | + VIA_3D_ENG_BUSY))) + --count; + return count; +} + +static uint32_t *via_align_cmd(drm_via_private_t *dev_priv, uint32_t cmd_type, + uint32_t addr, uint32_t *cmd_addr_hi, + uint32_t *cmd_addr_lo, int skip_wait) +{ + uint32_t agp_base; + uint32_t cmd_addr, addr_lo, addr_hi; + uint32_t *vb; + uint32_t qw_pad_count; + + if (!skip_wait) + via_cmdbuf_wait(dev_priv, 2 * CMDBUF_ALIGNMENT_SIZE); + + vb = via_get_dma(dev_priv); + VIA_OUT_RING_QW(HC_HEADER2 | ((VIA_REG_TRANSET >> 2) << 12) | + (VIA_REG_TRANSPACE >> 2), HC_ParaType_PreCR << 16); + agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; + qw_pad_count = (CMDBUF_ALIGNMENT_SIZE >> 3) - + ((dev_priv->dma_low & CMDBUF_ALIGNMENT_MASK) >> 3); + + cmd_addr = (addr) ? addr : + agp_base + dev_priv->dma_low - 8 + (qw_pad_count << 3); + addr_lo = ((HC_SubA_HAGPBpL << 24) | (cmd_type & HC_HAGPBpID_MASK) | + (cmd_addr & HC_HAGPBpL_MASK)); + addr_hi = ((HC_SubA_HAGPBpH << 24) | (cmd_addr >> 24)); + + vb = via_align_buffer(dev_priv, vb, qw_pad_count - 1); + VIA_OUT_RING_QW(*cmd_addr_hi = addr_hi, *cmd_addr_lo = addr_lo); + return vb; +} + +static void via_cmdbuf_start(drm_via_private_t *dev_priv) +{ + uint32_t pause_addr_lo, pause_addr_hi; + uint32_t start_addr, start_addr_lo; + uint32_t end_addr, end_addr_lo; + uint32_t command; + uint32_t agp_base; + uint32_t ptr; + uint32_t reader; + int count; + + dev_priv->dma_low = 0; + + agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; + start_addr = agp_base; + end_addr = agp_base + dev_priv->dma_high; + + start_addr_lo = ((HC_SubA_HAGPBstL << 24) | (start_addr & 0xFFFFFF)); + end_addr_lo = ((HC_SubA_HAGPBendL << 24) | (end_addr & 0xFFFFFF)); + command = ((HC_SubA_HAGPCMNT << 24) | (start_addr >> 24) | + ((end_addr & 0xff000000) >> 16)); + + dev_priv->last_pause_ptr = + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, + &pause_addr_hi, &pause_addr_lo, 1) - 1; + + via_flush_write_combine(); + (void) *(volatile uint32_t *)dev_priv->last_pause_ptr; + + via_write(dev_priv, VIA_REG_TRANSET, (HC_ParaType_PreCR << 16)); + via_write(dev_priv, VIA_REG_TRANSPACE, command); + via_write(dev_priv, VIA_REG_TRANSPACE, start_addr_lo); + via_write(dev_priv, VIA_REG_TRANSPACE, end_addr_lo); + + via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_hi); + via_write(dev_priv, VIA_REG_TRANSPACE, pause_addr_lo); + wmb(); + via_write(dev_priv, VIA_REG_TRANSPACE, command | HC_HAGPCMNT_MASK); + via_read(dev_priv, VIA_REG_TRANSPACE); + + dev_priv->dma_diff = 0; + + count = 10000000; + while (!(via_read(dev_priv, 0x41c) & 0x80000000) && count--); + + reader = *(dev_priv->hw_addr_ptr); + ptr = ((volatile char *)dev_priv->last_pause_ptr - dev_priv->dma_ptr) + + dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; + + /* + * This is the difference between where we tell the + * command reader to pause and where it actually pauses. + * This differs between hw implementation so we need to + * detect it. + */ + + dev_priv->dma_diff = ptr - reader; +} + +static void via_pad_cache(drm_via_private_t *dev_priv, int qwords) +{ + uint32_t *vb; + + via_cmdbuf_wait(dev_priv, qwords + 2); + vb = via_get_dma(dev_priv); + VIA_OUT_RING_QW(HC_HEADER2, HC_ParaType_NotTex << 16); + via_align_buffer(dev_priv, vb, qwords); +} + +static inline void via_dummy_bitblt(drm_via_private_t *dev_priv) +{ + uint32_t *vb = via_get_dma(dev_priv); + SetReg2DAGP(0x0C, (0 | (0 << 16))); + SetReg2DAGP(0x10, 0 | (0 << 16)); + SetReg2DAGP(0x0, 0x1 | 0x2000 | 0xAA000000); +} + +static void via_cmdbuf_jump(drm_via_private_t *dev_priv) +{ + uint32_t pause_addr_lo, pause_addr_hi; + uint32_t jump_addr_lo, jump_addr_hi; + volatile uint32_t *last_pause_ptr; + uint32_t dma_low_save1, dma_low_save2; + + via_align_cmd(dev_priv, HC_HAGPBpID_JUMP, 0, &jump_addr_hi, + &jump_addr_lo, 0); + + dev_priv->dma_wrap = dev_priv->dma_low; + + /* + * Wrap command buffer to the beginning. + */ + + dev_priv->dma_low = 0; + if (via_cmdbuf_wait(dev_priv, CMDBUF_ALIGNMENT_SIZE) != 0) + DRM_ERROR("via_cmdbuf_jump failed\n"); + + via_dummy_bitblt(dev_priv); + via_dummy_bitblt(dev_priv); + + last_pause_ptr = + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, + &pause_addr_lo, 0) - 1; + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, + &pause_addr_lo, 0); + + *last_pause_ptr = pause_addr_lo; + dma_low_save1 = dev_priv->dma_low; + + /* + * Now, set a trap that will pause the regulator if it tries to rerun the old + * command buffer. (Which may happen if via_hook_segment detecs a command regulator pause + * and reissues the jump command over PCI, while the regulator has already taken the jump + * and actually paused at the current buffer end). + * There appears to be no other way to detect this condition, since the hw_addr_pointer + * does not seem to get updated immediately when a jump occurs. + */ + + last_pause_ptr = + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, + &pause_addr_lo, 0) - 1; + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, + &pause_addr_lo, 0); + *last_pause_ptr = pause_addr_lo; + + dma_low_save2 = dev_priv->dma_low; + dev_priv->dma_low = dma_low_save1; + via_hook_segment(dev_priv, jump_addr_hi, jump_addr_lo, 0); + dev_priv->dma_low = dma_low_save2; + via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); +} + + +static void via_cmdbuf_rewind(drm_via_private_t *dev_priv) +{ + via_cmdbuf_jump(dev_priv); +} + +static void via_cmdbuf_flush(drm_via_private_t *dev_priv, uint32_t cmd_type) +{ + uint32_t pause_addr_lo, pause_addr_hi; + + via_align_cmd(dev_priv, cmd_type, 0, &pause_addr_hi, &pause_addr_lo, 0); + via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); +} + +static void via_cmdbuf_pause(drm_via_private_t *dev_priv) +{ + via_cmdbuf_flush(dev_priv, HC_HAGPBpID_PAUSE); +} + +static void via_cmdbuf_reset(drm_via_private_t *dev_priv) +{ + via_cmdbuf_flush(dev_priv, HC_HAGPBpID_STOP); + via_wait_idle(dev_priv); +} + +/* + * User interface to the space and lag functions. + */ + +static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_cmdbuf_size_t *d_siz = data; + int ret = 0; + uint32_t tmp_size, count; + drm_via_private_t *dev_priv; + + DRM_DEBUG("\n"); + LOCK_TEST_WITH_RETURN(dev, file_priv); + + dev_priv = (drm_via_private_t *) dev->dev_private; + + if (dev_priv->ring.virtual_start == NULL) { + DRM_ERROR("called without initializing AGP ring buffer.\n"); + return -EFAULT; + } + + count = 1000000; + tmp_size = d_siz->size; + switch (d_siz->func) { + case VIA_CMDBUF_SPACE: + while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size) + && --count) { + if (!d_siz->wait) + break; + } + if (!count) { + DRM_ERROR("VIA_CMDBUF_SPACE timed out.\n"); + ret = -EAGAIN; + } + break; + case VIA_CMDBUF_LAG: + while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size) + && --count) { + if (!d_siz->wait) + break; + } + if (!count) { + DRM_ERROR("VIA_CMDBUF_LAG timed out.\n"); + ret = -EAGAIN; + } + break; + default: + ret = -EFAULT; + } + d_siz->size = tmp_size; + + return ret; +} + +const struct drm_ioctl_desc via_ioctls[] = { + DRM_IOCTL_DEF_DRV(VIA_ALLOCMEM, via_mem_alloc, DRM_AUTH), + DRM_IOCTL_DEF_DRV(VIA_FREEMEM, via_mem_free, DRM_AUTH), + DRM_IOCTL_DEF_DRV(VIA_AGP_INIT, via_agp_init, DRM_AUTH|DRM_MASTER), + DRM_IOCTL_DEF_DRV(VIA_FB_INIT, via_fb_init, DRM_AUTH|DRM_MASTER), + DRM_IOCTL_DEF_DRV(VIA_MAP_INIT, via_map_init, DRM_AUTH|DRM_MASTER), + DRM_IOCTL_DEF_DRV(VIA_DEC_FUTEX, via_decoder_futex, DRM_AUTH), + DRM_IOCTL_DEF_DRV(VIA_DMA_INIT, via_dma_init, DRM_AUTH), + DRM_IOCTL_DEF_DRV(VIA_CMDBUFFER, via_cmdbuffer, DRM_AUTH), + DRM_IOCTL_DEF_DRV(VIA_FLUSH, via_flush_ioctl, DRM_AUTH), + DRM_IOCTL_DEF_DRV(VIA_PCICMD, via_pci_cmdbuffer, DRM_AUTH), + DRM_IOCTL_DEF_DRV(VIA_CMDBUF_SIZE, via_cmdbuf_size, DRM_AUTH), + DRM_IOCTL_DEF_DRV(VIA_WAIT_IRQ, via_wait_irq, DRM_AUTH), + DRM_IOCTL_DEF_DRV(VIA_DMA_BLIT, via_dma_blit, DRM_AUTH), + DRM_IOCTL_DEF_DRV(VIA_BLIT_SYNC, via_dma_blit_sync, DRM_AUTH) +}; + +int via_max_ioctl = ARRAY_SIZE(via_ioctls); + + +/* + * via_dmablit.c -- PCI DMA BitBlt support for the VIA Unichrome/Pro + * + * Copyright (C) 2005 Thomas Hellstrom, All Rights Reserved. + * + * Authors: + * Thomas Hellstrom. + * Partially based on code obtained from Digeo Inc. + */ + +/* + * Unmaps the DMA mappings. + * FIXME: Is this a NoOp on x86? Also + * FIXME: What happens if this one is called and a pending blit has previously done + * the same DMA mappings? + */ + +#define VIA_PGDN(x) (((unsigned long)(x)) & PAGE_MASK) +#define VIA_PGOFF(x) (((unsigned long)(x)) & ~PAGE_MASK) +#define VIA_PFN(x) ((unsigned long)(x) >> PAGE_SHIFT) + +typedef struct _drm_via_descriptor { + uint32_t mem_addr; + uint32_t dev_addr; + uint32_t size; + uint32_t next; +} drm_via_descriptor_t; + + +/* + * Unmap a DMA mapping. + */ + + + +static void +via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg) +{ + int num_desc = vsg->num_desc; + unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page; + unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page; + drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] + + descriptor_this_page; + dma_addr_t next = vsg->chain_start; + + while (num_desc--) { + if (descriptor_this_page-- == 0) { + cur_descriptor_page--; + descriptor_this_page = vsg->descriptors_per_page - 1; + desc_ptr = vsg->desc_pages[cur_descriptor_page] + + descriptor_this_page; + } + dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE); + dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction); + next = (dma_addr_t) desc_ptr->next; + desc_ptr--; + } +} + +/* + * If mode = 0, count how many descriptors are needed. + * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors. + * Descriptors are run in reverse order by the hardware because we are not allowed to update the + * 'next' field without syncing calls when the descriptor is already mapped. + */ + +static void +via_map_blit_for_device(struct pci_dev *pdev, + const drm_via_dmablit_t *xfer, + drm_via_sg_info_t *vsg, + int mode) +{ + unsigned cur_descriptor_page = 0; + unsigned num_descriptors_this_page = 0; + unsigned char *mem_addr = xfer->mem_addr; + unsigned char *cur_mem; + unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr); + uint32_t fb_addr = xfer->fb_addr; + uint32_t cur_fb; + unsigned long line_len; + unsigned remaining_len; + int num_desc = 0; + int cur_line; + dma_addr_t next = 0 | VIA_DMA_DPR_EC; + drm_via_descriptor_t *desc_ptr = NULL; + + if (mode == 1) + desc_ptr = vsg->desc_pages[cur_descriptor_page]; + + for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) { + + line_len = xfer->line_length; + cur_fb = fb_addr; + cur_mem = mem_addr; + + while (line_len > 0) { + + remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len); + line_len -= remaining_len; + + if (mode == 1) { + desc_ptr->mem_addr = + dma_map_page(&pdev->dev, + vsg->pages[VIA_PFN(cur_mem) - + VIA_PFN(first_addr)], + VIA_PGOFF(cur_mem), remaining_len, + vsg->direction); + desc_ptr->dev_addr = cur_fb; + + desc_ptr->size = remaining_len; + desc_ptr->next = (uint32_t) next; + next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr), + DMA_TO_DEVICE); + desc_ptr++; + if (++num_descriptors_this_page >= vsg->descriptors_per_page) { + num_descriptors_this_page = 0; + desc_ptr = vsg->desc_pages[++cur_descriptor_page]; + } + } + + num_desc++; + cur_mem += remaining_len; + cur_fb += remaining_len; + } + + mem_addr += xfer->mem_stride; + fb_addr += xfer->fb_stride; + } + + if (mode == 1) { + vsg->chain_start = next; + vsg->state = dr_via_device_mapped; + } + vsg->num_desc = num_desc; +} + +/* + * Function that frees up all resources for a blit. It is usable even if the + * blit info has only been partially built as long as the status enum is consistent + * with the actual status of the used resources. + */ + + +static void +via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) +{ + int i; + + switch (vsg->state) { + case dr_via_device_mapped: + via_unmap_blit_from_device(pdev, vsg); + fallthrough; + case dr_via_desc_pages_alloc: + for (i = 0; i < vsg->num_desc_pages; ++i) { + if (vsg->desc_pages[i] != NULL) + free_page((unsigned long)vsg->desc_pages[i]); + } + kfree(vsg->desc_pages); + fallthrough; + case dr_via_pages_locked: + unpin_user_pages_dirty_lock(vsg->pages, vsg->num_pages, + (vsg->direction == DMA_FROM_DEVICE)); + fallthrough; + case dr_via_pages_alloc: + vfree(vsg->pages); + fallthrough; + default: + vsg->state = dr_via_sg_init; + } + vfree(vsg->bounce_buffer); + vsg->bounce_buffer = NULL; + vsg->free_on_sequence = 0; +} + +/* + * Fire a blit engine. + */ + +static void +via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + + via_write(dev_priv, VIA_PCI_DMA_MAR0 + engine*0x10, 0); + via_write(dev_priv, VIA_PCI_DMA_DAR0 + engine*0x10, 0); + via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD | + VIA_DMA_CSR_DE); + via_write(dev_priv, VIA_PCI_DMA_MR0 + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE); + via_write(dev_priv, VIA_PCI_DMA_BCR0 + engine*0x10, 0); + via_write(dev_priv, VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start); + wmb(); + via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS); + via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04); +} + +/* + * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will + * occur here if the calling user does not have access to the submitted address. + */ + +static int +via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) +{ + int ret; + unsigned long first_pfn = VIA_PFN(xfer->mem_addr); + vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) - + first_pfn + 1; + + vsg->pages = vzalloc(array_size(sizeof(struct page *), vsg->num_pages)); + if (NULL == vsg->pages) + return -ENOMEM; + ret = pin_user_pages_fast((unsigned long)xfer->mem_addr, + vsg->num_pages, + vsg->direction == DMA_FROM_DEVICE ? FOLL_WRITE : 0, + vsg->pages); + if (ret != vsg->num_pages) { + if (ret < 0) + return ret; + vsg->state = dr_via_pages_locked; + return -EINVAL; + } + vsg->state = dr_via_pages_locked; + DRM_DEBUG("DMA pages locked\n"); + return 0; +} + +/* + * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the + * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be + * quite large for some blits, and pages don't need to be contiguous. + */ + +static int +via_alloc_desc_pages(drm_via_sg_info_t *vsg) +{ + int i; + + vsg->descriptors_per_page = PAGE_SIZE / sizeof(drm_via_descriptor_t); + vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) / + vsg->descriptors_per_page; + + if (NULL == (vsg->desc_pages = kcalloc(vsg->num_desc_pages, sizeof(void *), GFP_KERNEL))) + return -ENOMEM; + + vsg->state = dr_via_desc_pages_alloc; + for (i = 0; i < vsg->num_desc_pages; ++i) { + if (NULL == (vsg->desc_pages[i] = + (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL))) + return -ENOMEM; + } + DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages, + vsg->num_desc); + return 0; +} + +static void +via_abort_dmablit(struct drm_device *dev, int engine) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + + via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA); +} + +static void +via_dmablit_engine_off(struct drm_device *dev, int engine) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + + via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD); +} + + + +/* + * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here. + * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue + * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while + * the workqueue task takes care of processing associated with the old blit. + */ + +void +via_dmablit_handler(struct drm_device *dev, int engine, int from_irq) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + drm_via_blitq_t *blitq = dev_priv->blit_queues + engine; + int cur; + int done_transfer; + unsigned long irqsave = 0; + uint32_t status = 0; + + DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n", + engine, from_irq, (unsigned long) blitq); + + if (from_irq) + spin_lock(&blitq->blit_lock); + else + spin_lock_irqsave(&blitq->blit_lock, irqsave); + + done_transfer = blitq->is_active && + ((status = via_read(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD); + done_transfer = done_transfer || (blitq->aborting && !(status & VIA_DMA_CSR_DE)); + + cur = blitq->cur; + if (done_transfer) { + + blitq->blits[cur]->aborted = blitq->aborting; + blitq->done_blit_handle++; + wake_up(blitq->blit_queue + cur); + + cur++; + if (cur >= VIA_NUM_BLIT_SLOTS) + cur = 0; + blitq->cur = cur; + + /* + * Clear transfer done flag. + */ + + via_write(dev_priv, VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD); + + blitq->is_active = 0; + blitq->aborting = 0; + schedule_work(&blitq->wq); + + } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) { + + /* + * Abort transfer after one second. + */ + + via_abort_dmablit(dev, engine); + blitq->aborting = 1; + blitq->end = jiffies + HZ; + } + + if (!blitq->is_active) { + if (blitq->num_outstanding) { + via_fire_dmablit(dev, blitq->blits[cur], engine); + blitq->is_active = 1; + blitq->cur = cur; + blitq->num_outstanding--; + blitq->end = jiffies + HZ; + if (!timer_pending(&blitq->poll_timer)) + mod_timer(&blitq->poll_timer, jiffies + 1); + } else { + if (timer_pending(&blitq->poll_timer)) + del_timer(&blitq->poll_timer); + via_dmablit_engine_off(dev, engine); + } + } + + if (from_irq) + spin_unlock(&blitq->blit_lock); + else + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); +} + + + +/* + * Check whether this blit is still active, performing necessary locking. + */ + +static int +via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue) +{ + unsigned long irqsave; + uint32_t slot; + int active; + + spin_lock_irqsave(&blitq->blit_lock, irqsave); + + /* + * Allow for handle wraparounds. + */ + + active = ((blitq->done_blit_handle - handle) > (1 << 23)) && + ((blitq->cur_blit_handle - handle) <= (1 << 23)); + + if (queue && active) { + slot = handle - blitq->done_blit_handle + blitq->cur - 1; + if (slot >= VIA_NUM_BLIT_SLOTS) + slot -= VIA_NUM_BLIT_SLOTS; + *queue = blitq->blit_queue + slot; + } + + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + + return active; +} + +/* + * Sync. Wait for at least three seconds for the blit to be performed. + */ + +static int +via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine) +{ + + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + drm_via_blitq_t *blitq = dev_priv->blit_queues + engine; + wait_queue_head_t *queue; + int ret = 0; + + if (via_dmablit_active(blitq, engine, handle, &queue)) { + VIA_WAIT_ON(ret, *queue, 3 * HZ, + !via_dmablit_active(blitq, engine, handle, NULL)); + } + DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n", + handle, engine, ret); + + return ret; +} + + +/* + * A timer that regularly polls the blit engine in cases where we don't have interrupts: + * a) Broken hardware (typically those that don't have any video capture facility). + * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted. + * The timer and hardware IRQ's can and do work in parallel. If the hardware has + * irqs, it will shorten the latency somewhat. + */ + + + +static void +via_dmablit_timer(struct timer_list *t) +{ + drm_via_blitq_t *blitq = from_timer(blitq, t, poll_timer); + struct drm_device *dev = blitq->dev; + int engine = (int) + (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues); + + DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine, + (unsigned long) jiffies); + + via_dmablit_handler(dev, engine, 0); + + if (!timer_pending(&blitq->poll_timer)) { + mod_timer(&blitq->poll_timer, jiffies + 1); + + /* + * Rerun handler to delete timer if engines are off, and + * to shorten abort latency. This is a little nasty. + */ + + via_dmablit_handler(dev, engine, 0); + + } +} + + + + +/* + * Workqueue task that frees data and mappings associated with a blit. + * Also wakes up waiting processes. Each of these tasks handles one + * blit engine only and may not be called on each interrupt. + */ + + +static void +via_dmablit_workqueue(struct work_struct *work) +{ + drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq); + struct drm_device *dev = blitq->dev; + struct pci_dev *pdev = to_pci_dev(dev->dev); + unsigned long irqsave; + drm_via_sg_info_t *cur_sg; + int cur_released; + + + DRM_DEBUG("Workqueue task called for blit engine %ld\n", (unsigned long) + (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues)); + + spin_lock_irqsave(&blitq->blit_lock, irqsave); + + while (blitq->serviced != blitq->cur) { + + cur_released = blitq->serviced++; + + DRM_DEBUG("Releasing blit slot %d\n", cur_released); + + if (blitq->serviced >= VIA_NUM_BLIT_SLOTS) + blitq->serviced = 0; + + cur_sg = blitq->blits[cur_released]; + blitq->num_free++; + + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + + wake_up(&blitq->busy_queue); + + via_free_sg_info(pdev, cur_sg); + kfree(cur_sg); + + spin_lock_irqsave(&blitq->blit_lock, irqsave); + } + + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); +} + + +/* + * Init all blit engines. Currently we use two, but some hardware have 4. + */ + + +void +via_init_dmablit(struct drm_device *dev) +{ + int i, j; + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + struct pci_dev *pdev = to_pci_dev(dev->dev); + drm_via_blitq_t *blitq; + + pci_set_master(pdev); + + for (i = 0; i < VIA_NUM_BLIT_ENGINES; ++i) { + blitq = dev_priv->blit_queues + i; + blitq->dev = dev; + blitq->cur_blit_handle = 0; + blitq->done_blit_handle = 0; + blitq->head = 0; + blitq->cur = 0; + blitq->serviced = 0; + blitq->num_free = VIA_NUM_BLIT_SLOTS - 1; + blitq->num_outstanding = 0; + blitq->is_active = 0; + blitq->aborting = 0; + spin_lock_init(&blitq->blit_lock); + for (j = 0; j < VIA_NUM_BLIT_SLOTS; ++j) + init_waitqueue_head(blitq->blit_queue + j); + init_waitqueue_head(&blitq->busy_queue); + INIT_WORK(&blitq->wq, via_dmablit_workqueue); + timer_setup(&blitq->poll_timer, via_dmablit_timer, 0); + } +} + +/* + * Build all info and do all mappings required for a blit. + */ + + +static int +via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + int draw = xfer->to_fb; + int ret = 0; + + vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; + vsg->bounce_buffer = NULL; + + vsg->state = dr_via_sg_init; + + if (xfer->num_lines <= 0 || xfer->line_length <= 0) { + DRM_ERROR("Zero size bitblt.\n"); + return -EINVAL; + } + + /* + * Below check is a driver limitation, not a hardware one. We + * don't want to lock unused pages, and don't want to incoporate the + * extra logic of avoiding them. Make sure there are no. + * (Not a big limitation anyway.) + */ + + if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) { + DRM_ERROR("Too large system memory stride. Stride: %d, " + "Length: %d\n", xfer->mem_stride, xfer->line_length); + return -EINVAL; + } + + if ((xfer->mem_stride == xfer->line_length) && + (xfer->fb_stride == xfer->line_length)) { + xfer->mem_stride *= xfer->num_lines; + xfer->line_length = xfer->mem_stride; + xfer->fb_stride = xfer->mem_stride; + xfer->num_lines = 1; + } + + /* + * Don't lock an arbitrary large number of pages, since that causes a + * DOS security hole. + */ + + if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) { + DRM_ERROR("Too large PCI DMA bitblt.\n"); + return -EINVAL; + } + + /* + * we allow a negative fb stride to allow flipping of images in + * transfer. + */ + + if (xfer->mem_stride < xfer->line_length || + abs(xfer->fb_stride) < xfer->line_length) { + DRM_ERROR("Invalid frame-buffer / memory stride.\n"); + return -EINVAL; + } + + /* + * A hardware bug seems to be worked around if system memory addresses start on + * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted + * about this. Meanwhile, impose the following restrictions: + */ + +#ifdef VIA_BUGFREE + if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) || + ((xfer->num_lines > 1) && ((xfer->mem_stride & 3) != (xfer->fb_stride & 3)))) { + DRM_ERROR("Invalid DRM bitblt alignment.\n"); + return -EINVAL; + } +#else + if ((((unsigned long)xfer->mem_addr & 15) || + ((unsigned long)xfer->fb_addr & 3)) || + ((xfer->num_lines > 1) && + ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) { + DRM_ERROR("Invalid DRM bitblt alignment.\n"); + return -EINVAL; + } +#endif + + if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) { + DRM_ERROR("Could not lock DMA pages.\n"); + via_free_sg_info(pdev, vsg); + return ret; + } + + via_map_blit_for_device(pdev, xfer, vsg, 0); + if (0 != (ret = via_alloc_desc_pages(vsg))) { + DRM_ERROR("Could not allocate DMA descriptor pages.\n"); + via_free_sg_info(pdev, vsg); + return ret; + } + via_map_blit_for_device(pdev, xfer, vsg, 1); + + return 0; +} + + +/* + * Reserve one free slot in the blit queue. Will wait for one second for one + * to become available. Otherwise -EBUSY is returned. + */ + +static int +via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine) +{ + int ret = 0; + unsigned long irqsave; + + DRM_DEBUG("Num free is %d\n", blitq->num_free); + spin_lock_irqsave(&blitq->blit_lock, irqsave); + while (blitq->num_free == 0) { + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + + VIA_WAIT_ON(ret, blitq->busy_queue, HZ, blitq->num_free > 0); + if (ret) + return (-EINTR == ret) ? -EAGAIN : ret; + + spin_lock_irqsave(&blitq->blit_lock, irqsave); + } + + blitq->num_free--; + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + + return 0; +} + +/* + * Hand back a free slot if we changed our mind. + */ + +static void +via_dmablit_release_slot(drm_via_blitq_t *blitq) +{ + unsigned long irqsave; + + spin_lock_irqsave(&blitq->blit_lock, irqsave); + blitq->num_free++; + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + wake_up(&blitq->busy_queue); +} + +/* + * Grab a free slot. Build blit info and queue a blit. + */ + + +static int +via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; + drm_via_sg_info_t *vsg; + drm_via_blitq_t *blitq; + int ret; + int engine; + unsigned long irqsave; + + if (dev_priv == NULL) { + DRM_ERROR("Called without initialization.\n"); + return -EINVAL; + } + + engine = (xfer->to_fb) ? 0 : 1; + blitq = dev_priv->blit_queues + engine; + if (0 != (ret = via_dmablit_grab_slot(blitq, engine))) + return ret; + if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) { + via_dmablit_release_slot(blitq); + return -ENOMEM; + } + if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) { + via_dmablit_release_slot(blitq); + kfree(vsg); + return ret; + } + spin_lock_irqsave(&blitq->blit_lock, irqsave); + + blitq->blits[blitq->head++] = vsg; + if (blitq->head >= VIA_NUM_BLIT_SLOTS) + blitq->head = 0; + blitq->num_outstanding++; + xfer->sync.sync_handle = ++blitq->cur_blit_handle; + + spin_unlock_irqrestore(&blitq->blit_lock, irqsave); + xfer->sync.engine = engine; + + via_dmablit_handler(dev, engine, 0); + + return 0; +} + +/* + * Sync on a previously submitted blit. Note that the X server use signals extensively, and + * that there is a very big probability that this IOCTL will be interrupted by a signal. In that + * case it returns with -EAGAIN for the signal to be delivered. + * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock(). + */ + +int +via_dma_blit_sync(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_blitsync_t *sync = data; + int err; + + if (sync->engine >= VIA_NUM_BLIT_ENGINES) + return -EINVAL; + + err = via_dmablit_sync(dev, sync->sync_handle, sync->engine); + + if (-EINTR == err) + err = -EAGAIN; + + return err; +} + + +/* + * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal + * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should + * be reissued. See the above IOCTL code. + */ + +int +via_dma_blit(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_dmablit_t *xfer = data; + int err; + + err = via_dmablit(dev, xfer); + + return err; +} + +/* + * Legacy file: via_drv.c + * + * Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved. + */ + +static int via_driver_open(struct drm_device *dev, struct drm_file *file) +{ + struct via_file_private *file_priv; + + DRM_DEBUG_DRIVER("\n"); + file_priv = kmalloc(sizeof(*file_priv), GFP_KERNEL); + if (!file_priv) + return -ENOMEM; + + file->driver_priv = file_priv; + + INIT_LIST_HEAD(&file_priv->obj_list); + + return 0; +} + +static void via_driver_postclose(struct drm_device *dev, struct drm_file *file) +{ + struct via_file_private *file_priv = file->driver_priv; + + kfree(file_priv); +} + +static struct pci_device_id pciidlist[] = { + viadrv_PCI_IDS +}; + +static const struct file_operations via_driver_fops = { + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .unlocked_ioctl = drm_ioctl, + .mmap = drm_legacy_mmap, + .poll = drm_poll, + .compat_ioctl = drm_compat_ioctl, + .llseek = noop_llseek, +}; + +static struct drm_driver driver = { + .driver_features = + DRIVER_USE_AGP | DRIVER_HAVE_IRQ | DRIVER_LEGACY, + .load = via_driver_load, + .unload = via_driver_unload, + .open = via_driver_open, + .preclose = via_reclaim_buffers_locked, + .postclose = via_driver_postclose, + .context_dtor = via_final_context, + .get_vblank_counter = via_get_vblank_counter, + .enable_vblank = via_enable_vblank, + .disable_vblank = via_disable_vblank, + .irq_preinstall = via_driver_irq_preinstall, + .irq_postinstall = via_driver_irq_postinstall, + .irq_uninstall = via_driver_irq_uninstall, + .irq_handler = via_driver_irq_handler, + .dma_quiescent = via_driver_dma_quiescent, + .lastclose = via_lastclose, + .ioctls = via_ioctls, + .fops = &via_driver_fops, + .name = DRIVER_NAME, + .desc = DRIVER_DESC, + .date = DRIVER_DATE, + .major = DRIVER_MAJOR, + .minor = DRIVER_MINOR, + .patchlevel = DRIVER_PATCHLEVEL, +}; + +static struct pci_driver via_pci_driver = { + .name = DRIVER_NAME, + .id_table = pciidlist, +}; + +static int __init via_init(void) +{ + driver.num_ioctls = via_max_ioctl; + via_init_command_verifier(); + return drm_legacy_pci_init(&driver, &via_pci_driver); +} + +static void __exit via_exit(void) +{ + drm_legacy_pci_exit(&driver, &via_pci_driver); +} + +module_init(via_init); +module_exit(via_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL and additional rights"); + +/* + * Legacy file: via_irq.c + * + * Copyright 2004 BEAM Ltd. + * Copyright 2002 Tungsten Graphics, Inc. + * Copyright 2005 Thomas Hellstrom. + * All Rights Reserved. + * + * Authors: + * Terry Barnaby <terry1@beam.ltd.uk> + * Keith Whitwell <keith@tungstengraphics.com> + * Thomas Hellstrom <unichrome@shipmail.org> + * + * This code provides standard DRM access to the Via Unichrome / Pro Vertical blank + * interrupt, as well as an infrastructure to handle other interrupts of the chip. + * The refresh rate is also calculated for video playback sync purposes. + */ + +#define VIA_REG_INTERRUPT 0x200 + +/* VIA_REG_INTERRUPT */ +#define VIA_IRQ_GLOBAL (1 << 31) +#define VIA_IRQ_VBLANK_ENABLE (1 << 19) +#define VIA_IRQ_VBLANK_PENDING (1 << 3) +#define VIA_IRQ_HQV0_ENABLE (1 << 11) +#define VIA_IRQ_HQV1_ENABLE (1 << 25) +#define VIA_IRQ_HQV0_PENDING (1 << 9) +#define VIA_IRQ_HQV1_PENDING (1 << 10) +#define VIA_IRQ_DMA0_DD_ENABLE (1 << 20) +#define VIA_IRQ_DMA0_TD_ENABLE (1 << 21) +#define VIA_IRQ_DMA1_DD_ENABLE (1 << 22) +#define VIA_IRQ_DMA1_TD_ENABLE (1 << 23) +#define VIA_IRQ_DMA0_DD_PENDING (1 << 4) +#define VIA_IRQ_DMA0_TD_PENDING (1 << 5) +#define VIA_IRQ_DMA1_DD_PENDING (1 << 6) +#define VIA_IRQ_DMA1_TD_PENDING (1 << 7) + + +/* + * Device-specific IRQs go here. This type might need to be extended with + * the register if there are multiple IRQ control registers. + * Currently we activate the HQV interrupts of Unichrome Pro group A. + */ + +static maskarray_t via_pro_group_a_irqs[] = { + {VIA_IRQ_HQV0_ENABLE, VIA_IRQ_HQV0_PENDING, 0x000003D0, 0x00008010, + 0x00000000 }, + {VIA_IRQ_HQV1_ENABLE, VIA_IRQ_HQV1_PENDING, 0x000013D0, 0x00008010, + 0x00000000 }, + {VIA_IRQ_DMA0_TD_ENABLE, VIA_IRQ_DMA0_TD_PENDING, VIA_PCI_DMA_CSR0, + VIA_DMA_CSR_TA | VIA_DMA_CSR_TD, 0x00000008}, + {VIA_IRQ_DMA1_TD_ENABLE, VIA_IRQ_DMA1_TD_PENDING, VIA_PCI_DMA_CSR1, + VIA_DMA_CSR_TA | VIA_DMA_CSR_TD, 0x00000008}, +}; +static int via_num_pro_group_a = ARRAY_SIZE(via_pro_group_a_irqs); +static int via_irqmap_pro_group_a[] = {0, 1, -1, 2, -1, 3}; + +static maskarray_t via_unichrome_irqs[] = { + {VIA_IRQ_DMA0_TD_ENABLE, VIA_IRQ_DMA0_TD_PENDING, VIA_PCI_DMA_CSR0, + VIA_DMA_CSR_TA | VIA_DMA_CSR_TD, 0x00000008}, + {VIA_IRQ_DMA1_TD_ENABLE, VIA_IRQ_DMA1_TD_PENDING, VIA_PCI_DMA_CSR1, + VIA_DMA_CSR_TA | VIA_DMA_CSR_TD, 0x00000008} +}; +static int via_num_unichrome = ARRAY_SIZE(via_unichrome_irqs); +static int via_irqmap_unichrome[] = {-1, -1, -1, 0, -1, 1}; + + +u32 via_get_vblank_counter(struct drm_device *dev, unsigned int pipe) +{ + drm_via_private_t *dev_priv = dev->dev_private; + + if (pipe != 0) + return 0; + + return atomic_read(&dev_priv->vbl_received); +} + +irqreturn_t via_driver_irq_handler(int irq, void *arg) +{ + struct drm_device *dev = (struct drm_device *) arg; + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + u32 status; + int handled = 0; + ktime_t cur_vblank; + drm_via_irq_t *cur_irq = dev_priv->via_irqs; + int i; + + status = via_read(dev_priv, VIA_REG_INTERRUPT); + if (status & VIA_IRQ_VBLANK_PENDING) { + atomic_inc(&dev_priv->vbl_received); + if (!(atomic_read(&dev_priv->vbl_received) & 0x0F)) { + cur_vblank = ktime_get(); + if (dev_priv->last_vblank_valid) { + dev_priv->nsec_per_vblank = + ktime_sub(cur_vblank, + dev_priv->last_vblank) >> 4; + } + dev_priv->last_vblank = cur_vblank; + dev_priv->last_vblank_valid = 1; + } + if (!(atomic_read(&dev_priv->vbl_received) & 0xFF)) { + DRM_DEBUG("nsec per vblank is: %llu\n", + ktime_to_ns(dev_priv->nsec_per_vblank)); + } + drm_handle_vblank(dev, 0); + handled = 1; + } + + for (i = 0; i < dev_priv->num_irqs; ++i) { + if (status & cur_irq->pending_mask) { + atomic_inc(&cur_irq->irq_received); + wake_up(&cur_irq->irq_queue); + handled = 1; + if (dev_priv->irq_map[drm_via_irq_dma0_td] == i) + via_dmablit_handler(dev, 0, 1); + else if (dev_priv->irq_map[drm_via_irq_dma1_td] == i) + via_dmablit_handler(dev, 1, 1); + } + cur_irq++; + } + + /* Acknowledge interrupts */ + via_write(dev_priv, VIA_REG_INTERRUPT, status); + + + if (handled) + return IRQ_HANDLED; + else + return IRQ_NONE; +} + +static __inline__ void viadrv_acknowledge_irqs(drm_via_private_t *dev_priv) +{ + u32 status; + + if (dev_priv) { + /* Acknowledge interrupts */ + status = via_read(dev_priv, VIA_REG_INTERRUPT); + via_write(dev_priv, VIA_REG_INTERRUPT, status | + dev_priv->irq_pending_mask); + } +} + +int via_enable_vblank(struct drm_device *dev, unsigned int pipe) +{ + drm_via_private_t *dev_priv = dev->dev_private; + u32 status; + + if (pipe != 0) { + DRM_ERROR("%s: bad crtc %u\n", __func__, pipe); + return -EINVAL; + } + + status = via_read(dev_priv, VIA_REG_INTERRUPT); + via_write(dev_priv, VIA_REG_INTERRUPT, status | VIA_IRQ_VBLANK_ENABLE); + + via_write8(dev_priv, 0x83d4, 0x11); + via_write8_mask(dev_priv, 0x83d5, 0x30, 0x30); + + return 0; +} + +void via_disable_vblank(struct drm_device *dev, unsigned int pipe) +{ + drm_via_private_t *dev_priv = dev->dev_private; + u32 status; + + status = via_read(dev_priv, VIA_REG_INTERRUPT); + via_write(dev_priv, VIA_REG_INTERRUPT, status & ~VIA_IRQ_VBLANK_ENABLE); + + via_write8(dev_priv, 0x83d4, 0x11); + via_write8_mask(dev_priv, 0x83d5, 0x30, 0); + + if (pipe != 0) + DRM_ERROR("%s: bad crtc %u\n", __func__, pipe); +} + +static int +via_driver_irq_wait(struct drm_device *dev, unsigned int irq, int force_sequence, + unsigned int *sequence) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + unsigned int cur_irq_sequence; + drm_via_irq_t *cur_irq; + int ret = 0; + maskarray_t *masks; + int real_irq; + + DRM_DEBUG("\n"); + + if (!dev_priv) { + DRM_ERROR("called with no initialization\n"); + return -EINVAL; + } + + if (irq >= drm_via_irq_num) { + DRM_ERROR("Trying to wait on unknown irq %d\n", irq); + return -EINVAL; + } + + real_irq = dev_priv->irq_map[irq]; + + if (real_irq < 0) { + DRM_ERROR("Video IRQ %d not available on this hardware.\n", + irq); + return -EINVAL; + } + + masks = dev_priv->irq_masks; + cur_irq = dev_priv->via_irqs + real_irq; + + if (masks[real_irq][2] && !force_sequence) { + VIA_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ, + ((via_read(dev_priv, masks[irq][2]) & masks[irq][3]) == + masks[irq][4])); + cur_irq_sequence = atomic_read(&cur_irq->irq_received); + } else { + VIA_WAIT_ON(ret, cur_irq->irq_queue, 3 * HZ, + (((cur_irq_sequence = + atomic_read(&cur_irq->irq_received)) - + *sequence) <= (1 << 23))); + } + *sequence = cur_irq_sequence; + return ret; +} + + +/* + * drm_dma.h hooks + */ + +void via_driver_irq_preinstall(struct drm_device *dev) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + u32 status; + drm_via_irq_t *cur_irq; + int i; + + DRM_DEBUG("dev_priv: %p\n", dev_priv); + if (dev_priv) { + cur_irq = dev_priv->via_irqs; + + dev_priv->irq_enable_mask = VIA_IRQ_VBLANK_ENABLE; + dev_priv->irq_pending_mask = VIA_IRQ_VBLANK_PENDING; + + if (dev_priv->chipset == VIA_PRO_GROUP_A || + dev_priv->chipset == VIA_DX9_0) { + dev_priv->irq_masks = via_pro_group_a_irqs; + dev_priv->num_irqs = via_num_pro_group_a; + dev_priv->irq_map = via_irqmap_pro_group_a; + } else { + dev_priv->irq_masks = via_unichrome_irqs; + dev_priv->num_irqs = via_num_unichrome; + dev_priv->irq_map = via_irqmap_unichrome; + } + + for (i = 0; i < dev_priv->num_irqs; ++i) { + atomic_set(&cur_irq->irq_received, 0); + cur_irq->enable_mask = dev_priv->irq_masks[i][0]; + cur_irq->pending_mask = dev_priv->irq_masks[i][1]; + init_waitqueue_head(&cur_irq->irq_queue); + dev_priv->irq_enable_mask |= cur_irq->enable_mask; + dev_priv->irq_pending_mask |= cur_irq->pending_mask; + cur_irq++; + + DRM_DEBUG("Initializing IRQ %d\n", i); + } + + dev_priv->last_vblank_valid = 0; + + /* Clear VSync interrupt regs */ + status = via_read(dev_priv, VIA_REG_INTERRUPT); + via_write(dev_priv, VIA_REG_INTERRUPT, status & + ~(dev_priv->irq_enable_mask)); + + /* Clear bits if they're already high */ + viadrv_acknowledge_irqs(dev_priv); + } +} + +int via_driver_irq_postinstall(struct drm_device *dev) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + u32 status; + + DRM_DEBUG("fun: %s\n", __func__); + if (!dev_priv) + return -EINVAL; + + status = via_read(dev_priv, VIA_REG_INTERRUPT); + via_write(dev_priv, VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL + | dev_priv->irq_enable_mask); + + /* Some magic, oh for some data sheets ! */ + via_write8(dev_priv, 0x83d4, 0x11); + via_write8_mask(dev_priv, 0x83d5, 0x30, 0x30); + + return 0; +} + +void via_driver_irq_uninstall(struct drm_device *dev) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + u32 status; + + DRM_DEBUG("\n"); + if (dev_priv) { + + /* Some more magic, oh for some data sheets ! */ + + via_write8(dev_priv, 0x83d4, 0x11); + via_write8_mask(dev_priv, 0x83d5, 0x30, 0); + + status = via_read(dev_priv, VIA_REG_INTERRUPT); + via_write(dev_priv, VIA_REG_INTERRUPT, status & + ~(VIA_IRQ_VBLANK_ENABLE | dev_priv->irq_enable_mask)); + } +} + +int via_wait_irq(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_irqwait_t *irqwait = data; + struct timespec64 now; + int ret = 0; + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + drm_via_irq_t *cur_irq = dev_priv->via_irqs; + int force_sequence; + + if (irqwait->request.irq >= dev_priv->num_irqs) { + DRM_ERROR("Trying to wait on unknown irq %d\n", + irqwait->request.irq); + return -EINVAL; + } + + cur_irq += irqwait->request.irq; + + switch (irqwait->request.type & ~VIA_IRQ_FLAGS_MASK) { + case VIA_IRQ_RELATIVE: + irqwait->request.sequence += + atomic_read(&cur_irq->irq_received); + irqwait->request.type &= ~_DRM_VBLANK_RELATIVE; + break; + case VIA_IRQ_ABSOLUTE: + break; + default: + return -EINVAL; + } + + if (irqwait->request.type & VIA_IRQ_SIGNAL) { + DRM_ERROR("Signals on Via IRQs not implemented yet.\n"); + return -EINVAL; + } + + force_sequence = (irqwait->request.type & VIA_IRQ_FORCE_SEQUENCE); + + ret = via_driver_irq_wait(dev, irqwait->request.irq, force_sequence, + &irqwait->request.sequence); + ktime_get_ts64(&now); + irqwait->reply.tval_sec = now.tv_sec; + irqwait->reply.tval_usec = now.tv_nsec / NSEC_PER_USEC; + + return ret; +} + +/* + * Legacy file: via_map.c + * + * Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved. + */ + +static int via_do_init_map(struct drm_device *dev, drm_via_init_t *init) +{ + drm_via_private_t *dev_priv = dev->dev_private; + + DRM_DEBUG("\n"); + + dev_priv->sarea = drm_legacy_getsarea(dev); + if (!dev_priv->sarea) { + DRM_ERROR("could not find sarea!\n"); + dev->dev_private = (void *)dev_priv; + via_do_cleanup_map(dev); + return -EINVAL; + } + + dev_priv->fb = drm_legacy_findmap(dev, init->fb_offset); + if (!dev_priv->fb) { + DRM_ERROR("could not find framebuffer!\n"); + dev->dev_private = (void *)dev_priv; + via_do_cleanup_map(dev); + return -EINVAL; + } + dev_priv->mmio = drm_legacy_findmap(dev, init->mmio_offset); + if (!dev_priv->mmio) { + DRM_ERROR("could not find mmio region!\n"); + dev->dev_private = (void *)dev_priv; + via_do_cleanup_map(dev); + return -EINVAL; + } + + dev_priv->sarea_priv = + (drm_via_sarea_t *) ((u8 *) dev_priv->sarea->handle + + init->sarea_priv_offset); + + dev_priv->agpAddr = init->agpAddr; + + via_init_futex(dev_priv); + + via_init_dmablit(dev); + + dev->dev_private = (void *)dev_priv; + return 0; +} + +int via_do_cleanup_map(struct drm_device *dev) +{ + via_dma_cleanup(dev); + + return 0; +} + +int via_map_init(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_init_t *init = data; + + DRM_DEBUG("\n"); + + switch (init->func) { + case VIA_INIT_MAP: + return via_do_init_map(dev, init); + case VIA_CLEANUP_MAP: + return via_do_cleanup_map(dev); + } + + return -EINVAL; +} + +int via_driver_load(struct drm_device *dev, unsigned long chipset) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + drm_via_private_t *dev_priv; + int ret = 0; + + dev_priv = kzalloc(sizeof(drm_via_private_t), GFP_KERNEL); + if (dev_priv == NULL) + return -ENOMEM; + + idr_init(&dev_priv->object_idr); + dev->dev_private = (void *)dev_priv; + + dev_priv->chipset = chipset; + + pci_set_master(pdev); + + ret = drm_vblank_init(dev, 1); + if (ret) { + kfree(dev_priv); + return ret; + } + + return 0; +} + +void via_driver_unload(struct drm_device *dev) +{ + drm_via_private_t *dev_priv = dev->dev_private; + + idr_destroy(&dev_priv->object_idr); + + kfree(dev_priv); +} + +/* + * Legacy file: via_mm.c + * + * Copyright 2006 Tungsten Graphics Inc., Bismarck, ND., USA. + * All rights reserved. + * + * Authors: Thomas Hellström <thomas-at-tungstengraphics-dot-com> + */ + +#define VIA_MM_ALIGN_SHIFT 4 +#define VIA_MM_ALIGN_MASK ((1 << VIA_MM_ALIGN_SHIFT) - 1) + +struct via_memblock { + struct drm_mm_node mm_node; + struct list_head owner_list; +}; + +int via_agp_init(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_agp_t *agp = data; + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + + mutex_lock(&dev->struct_mutex); + drm_mm_init(&dev_priv->agp_mm, 0, agp->size >> VIA_MM_ALIGN_SHIFT); + + dev_priv->agp_initialized = 1; + dev_priv->agp_offset = agp->offset; + mutex_unlock(&dev->struct_mutex); + + DRM_DEBUG("offset = %u, size = %u\n", agp->offset, agp->size); + return 0; +} + +int via_fb_init(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_fb_t *fb = data; + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + + mutex_lock(&dev->struct_mutex); + drm_mm_init(&dev_priv->vram_mm, 0, fb->size >> VIA_MM_ALIGN_SHIFT); + + dev_priv->vram_initialized = 1; + dev_priv->vram_offset = fb->offset; + + mutex_unlock(&dev->struct_mutex); + DRM_DEBUG("offset = %u, size = %u\n", fb->offset, fb->size); + + return 0; + +} + +int via_final_context(struct drm_device *dev, int context) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + + via_release_futex(dev_priv, context); + + /* Linux specific until context tracking code gets ported to BSD */ + /* Last context, perform cleanup */ + if (list_is_singular(&dev->ctxlist)) { + DRM_DEBUG("Last Context\n"); + drm_legacy_irq_uninstall(dev); + via_cleanup_futex(dev_priv); + via_do_cleanup_map(dev); + } + return 1; +} + +void via_lastclose(struct drm_device *dev) +{ + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + + if (!dev_priv) + return; + + mutex_lock(&dev->struct_mutex); + if (dev_priv->vram_initialized) { + drm_mm_takedown(&dev_priv->vram_mm); + dev_priv->vram_initialized = 0; + } + if (dev_priv->agp_initialized) { + drm_mm_takedown(&dev_priv->agp_mm); + dev_priv->agp_initialized = 0; + } + mutex_unlock(&dev->struct_mutex); +} + +int via_mem_alloc(struct drm_device *dev, void *data, + struct drm_file *file) +{ + drm_via_mem_t *mem = data; + int retval = 0, user_key; + struct via_memblock *item; + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + struct via_file_private *file_priv = file->driver_priv; + unsigned long tmpSize; + + if (mem->type > VIA_MEM_AGP) { + DRM_ERROR("Unknown memory type allocation\n"); + return -EINVAL; + } + mutex_lock(&dev->struct_mutex); + if (0 == ((mem->type == VIA_MEM_VIDEO) ? dev_priv->vram_initialized : + dev_priv->agp_initialized)) { + mutex_unlock(&dev->struct_mutex); + DRM_ERROR + ("Attempt to allocate from uninitialized memory manager.\n"); + return -EINVAL; + } + + item = kzalloc(sizeof(*item), GFP_KERNEL); + if (!item) { + retval = -ENOMEM; + goto fail_alloc; + } + + tmpSize = (mem->size + VIA_MM_ALIGN_MASK) >> VIA_MM_ALIGN_SHIFT; + if (mem->type == VIA_MEM_AGP) + retval = drm_mm_insert_node(&dev_priv->agp_mm, + &item->mm_node, + tmpSize); + else + retval = drm_mm_insert_node(&dev_priv->vram_mm, + &item->mm_node, + tmpSize); + if (retval) + goto fail_alloc; + + retval = idr_alloc(&dev_priv->object_idr, item, 1, 0, GFP_KERNEL); + if (retval < 0) + goto fail_idr; + user_key = retval; + + list_add(&item->owner_list, &file_priv->obj_list); + mutex_unlock(&dev->struct_mutex); + + mem->offset = ((mem->type == VIA_MEM_VIDEO) ? + dev_priv->vram_offset : dev_priv->agp_offset) + + ((item->mm_node.start) << VIA_MM_ALIGN_SHIFT); + mem->index = user_key; + + return 0; + +fail_idr: + drm_mm_remove_node(&item->mm_node); +fail_alloc: + kfree(item); + mutex_unlock(&dev->struct_mutex); + + mem->offset = 0; + mem->size = 0; + mem->index = 0; + DRM_DEBUG("Video memory allocation failed\n"); + + return retval; +} + +int via_mem_free(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_private_t *dev_priv = dev->dev_private; + drm_via_mem_t *mem = data; + struct via_memblock *obj; + + mutex_lock(&dev->struct_mutex); + obj = idr_find(&dev_priv->object_idr, mem->index); + if (obj == NULL) { + mutex_unlock(&dev->struct_mutex); + return -EINVAL; + } + + idr_remove(&dev_priv->object_idr, mem->index); + list_del(&obj->owner_list); + drm_mm_remove_node(&obj->mm_node); + kfree(obj); + mutex_unlock(&dev->struct_mutex); + + DRM_DEBUG("free = 0x%lx\n", mem->index); + + return 0; +} + + +void via_reclaim_buffers_locked(struct drm_device *dev, + struct drm_file *file) +{ + struct via_file_private *file_priv = file->driver_priv; + struct via_memblock *entry, *next; + + if (!(dev->master && file->master->lock.hw_lock)) + return; + + drm_legacy_idlelock_take(&file->master->lock); + + mutex_lock(&dev->struct_mutex); + if (list_empty(&file_priv->obj_list)) { + mutex_unlock(&dev->struct_mutex); + drm_legacy_idlelock_release(&file->master->lock); + + return; + } + + via_driver_dma_quiescent(dev); + + list_for_each_entry_safe(entry, next, &file_priv->obj_list, + owner_list) { + list_del(&entry->owner_list); + drm_mm_remove_node(&entry->mm_node); + kfree(entry); + } + mutex_unlock(&dev->struct_mutex); + + drm_legacy_idlelock_release(&file->master->lock); + + return; +} + +/* + * Legacy file: via_verifier.c + * + * Copyright 2004 The Unichrome Project. All Rights Reserved. + * Copyright 2005 Thomas Hellstrom. All Rights Reserved. + * + * Author: Thomas Hellstrom 2004, 2005. + * This code was written using docs obtained under NDA from VIA Inc. + * + * Don't run this code directly on an AGP buffer. Due to cache problems it will + * be very slow. + */ + +typedef enum { + state_command, + state_header2, + state_header1, + state_vheader5, + state_vheader6, + state_error +} verifier_state_t; + +typedef enum { + no_check = 0, + check_for_header2, + check_for_header1, + check_for_header2_err, + check_for_header1_err, + check_for_fire, + check_z_buffer_addr0, + check_z_buffer_addr1, + check_z_buffer_addr_mode, + check_destination_addr0, + check_destination_addr1, + check_destination_addr_mode, + check_for_dummy, + check_for_dd, + check_texture_addr0, + check_texture_addr1, + check_texture_addr2, + check_texture_addr3, + check_texture_addr4, + check_texture_addr5, + check_texture_addr6, + check_texture_addr7, + check_texture_addr8, + check_texture_addr_mode, + check_for_vertex_count, + check_number_texunits, + forbidden_command +} hazard_t; + +/* + * Associates each hazard above with a possible multi-command + * sequence. For example an address that is split over multiple + * commands and that needs to be checked at the first command + * that does not include any part of the address. + */ + +static drm_via_sequence_t seqs[] = { + no_sequence, + no_sequence, + no_sequence, + no_sequence, + no_sequence, + no_sequence, + z_address, + z_address, + z_address, + dest_address, + dest_address, + dest_address, + no_sequence, + no_sequence, + tex_address, + tex_address, + tex_address, + tex_address, + tex_address, + tex_address, + tex_address, + tex_address, + tex_address, + tex_address, + no_sequence +}; + +typedef struct { + unsigned int code; + hazard_t hz; +} hz_init_t; + +static hz_init_t init_table1[] = { + {0xf2, check_for_header2_err}, + {0xf0, check_for_header1_err}, + {0xee, check_for_fire}, + {0xcc, check_for_dummy}, + {0xdd, check_for_dd}, + {0x00, no_check}, + {0x10, check_z_buffer_addr0}, + {0x11, check_z_buffer_addr1}, + {0x12, check_z_buffer_addr_mode}, + {0x13, no_check}, + {0x14, no_check}, + {0x15, no_check}, + {0x23, no_check}, + {0x24, no_check}, + {0x33, no_check}, + {0x34, no_check}, + {0x35, no_check}, + {0x36, no_check}, + {0x37, no_check}, + {0x38, no_check}, + {0x39, no_check}, + {0x3A, no_check}, + {0x3B, no_check}, + {0x3C, no_check}, + {0x3D, no_check}, + {0x3E, no_check}, + {0x40, check_destination_addr0}, + {0x41, check_destination_addr1}, + {0x42, check_destination_addr_mode}, + {0x43, no_check}, + {0x44, no_check}, + {0x50, no_check}, + {0x51, no_check}, + {0x52, no_check}, + {0x53, no_check}, + {0x54, no_check}, + {0x55, no_check}, + {0x56, no_check}, + {0x57, no_check}, + {0x58, no_check}, + {0x70, no_check}, + {0x71, no_check}, + {0x78, no_check}, + {0x79, no_check}, + {0x7A, no_check}, + {0x7B, no_check}, + {0x7C, no_check}, + {0x7D, check_for_vertex_count} +}; + +static hz_init_t init_table2[] = { + {0xf2, check_for_header2_err}, + {0xf0, check_for_header1_err}, + {0xee, check_for_fire}, + {0xcc, check_for_dummy}, + {0x00, check_texture_addr0}, + {0x01, check_texture_addr0}, + {0x02, check_texture_addr0}, + {0x03, check_texture_addr0}, + {0x04, check_texture_addr0}, + {0x05, check_texture_addr0}, + {0x06, check_texture_addr0}, + {0x07, check_texture_addr0}, + {0x08, check_texture_addr0}, + {0x09, check_texture_addr0}, + {0x20, check_texture_addr1}, + {0x21, check_texture_addr1}, + {0x22, check_texture_addr1}, + {0x23, check_texture_addr4}, + {0x2B, check_texture_addr3}, + {0x2C, check_texture_addr3}, + {0x2D, check_texture_addr3}, + {0x2E, check_texture_addr3}, + {0x2F, check_texture_addr3}, + {0x30, check_texture_addr3}, + {0x31, check_texture_addr3}, + {0x32, check_texture_addr3}, + {0x33, check_texture_addr3}, + {0x34, check_texture_addr3}, + {0x4B, check_texture_addr5}, + {0x4C, check_texture_addr6}, + {0x51, check_texture_addr7}, + {0x52, check_texture_addr8}, + {0x77, check_texture_addr2}, + {0x78, no_check}, + {0x79, no_check}, + {0x7A, no_check}, + {0x7B, check_texture_addr_mode}, + {0x7C, no_check}, + {0x7D, no_check}, + {0x7E, no_check}, + {0x7F, no_check}, + {0x80, no_check}, + {0x81, no_check}, + {0x82, no_check}, + {0x83, no_check}, + {0x85, no_check}, + {0x86, no_check}, + {0x87, no_check}, + {0x88, no_check}, + {0x89, no_check}, + {0x8A, no_check}, + {0x90, no_check}, + {0x91, no_check}, + {0x92, no_check}, + {0x93, no_check} +}; + +static hz_init_t init_table3[] = { + {0xf2, check_for_header2_err}, + {0xf0, check_for_header1_err}, + {0xcc, check_for_dummy}, + {0x00, check_number_texunits} +}; + +static hazard_t table1[256]; +static hazard_t table2[256]; +static hazard_t table3[256]; + +static __inline__ int +eat_words(const uint32_t **buf, const uint32_t *buf_end, unsigned num_words) +{ + if ((buf_end - *buf) >= num_words) { + *buf += num_words; + return 0; + } + DRM_ERROR("Illegal termination of DMA command buffer\n"); + return 1; +} + +/* + * Partially stolen from drm_memory.h + */ + +static __inline__ drm_local_map_t *via_drm_lookup_agp_map(drm_via_state_t *seq, + unsigned long offset, + unsigned long size, + struct drm_device *dev) +{ + struct drm_map_list *r_list; + drm_local_map_t *map = seq->map_cache; + + if (map && map->offset <= offset + && (offset + size) <= (map->offset + map->size)) { + return map; + } + + list_for_each_entry(r_list, &dev->maplist, head) { + map = r_list->map; + if (!map) + continue; + if (map->offset <= offset + && (offset + size) <= (map->offset + map->size) + && !(map->flags & _DRM_RESTRICTED) + && (map->type == _DRM_AGP)) { + seq->map_cache = map; + return map; + } + } + return NULL; +} + +/* + * Require that all AGP texture levels reside in the same AGP map which should + * be mappable by the client. This is not a big restriction. + * FIXME: To actually enforce this security policy strictly, drm_rmmap + * would have to wait for dma quiescent before removing an AGP map. + * The via_drm_lookup_agp_map call in reality seems to take + * very little CPU time. + */ + +static __inline__ int finish_current_sequence(drm_via_state_t * cur_seq) +{ + switch (cur_seq->unfinished) { + case z_address: + DRM_DEBUG("Z Buffer start address is 0x%x\n", cur_seq->z_addr); + break; + case dest_address: + DRM_DEBUG("Destination start address is 0x%x\n", + cur_seq->d_addr); + break; + case tex_address: + if (cur_seq->agp_texture) { + unsigned start = + cur_seq->tex_level_lo[cur_seq->texture]; + unsigned end = cur_seq->tex_level_hi[cur_seq->texture]; + unsigned long lo = ~0, hi = 0, tmp; + uint32_t *addr, *pitch, *height, tex; + unsigned i; + int npot; + + if (end > 9) + end = 9; + if (start > 9) + start = 9; + + addr = + &(cur_seq->t_addr[tex = cur_seq->texture][start]); + pitch = &(cur_seq->pitch[tex][start]); + height = &(cur_seq->height[tex][start]); + npot = cur_seq->tex_npot[tex]; + for (i = start; i <= end; ++i) { + tmp = *addr++; + if (tmp < lo) + lo = tmp; + if (i == 0 && npot) + tmp += (*height++ * *pitch++); + else + tmp += (*height++ << *pitch++); + if (tmp > hi) + hi = tmp; + } + + if (!via_drm_lookup_agp_map + (cur_seq, lo, hi - lo, cur_seq->dev)) { + DRM_ERROR + ("AGP texture is not in allowed map\n"); + return 2; + } + } + break; + default: + break; + } + cur_seq->unfinished = no_sequence; + return 0; +} + +static __inline__ int +investigate_hazard(uint32_t cmd, hazard_t hz, drm_via_state_t *cur_seq) +{ + register uint32_t tmp, *tmp_addr; + + if (cur_seq->unfinished && (cur_seq->unfinished != seqs[hz])) { + int ret; + if ((ret = finish_current_sequence(cur_seq))) + return ret; + } + + switch (hz) { + case check_for_header2: + if (cmd == HALCYON_HEADER2) + return 1; + return 0; + case check_for_header1: + if ((cmd & HALCYON_HEADER1MASK) == HALCYON_HEADER1) + return 1; + return 0; + case check_for_header2_err: + if (cmd == HALCYON_HEADER2) + return 1; + DRM_ERROR("Illegal DMA HALCYON_HEADER2 command\n"); + break; + case check_for_header1_err: + if ((cmd & HALCYON_HEADER1MASK) == HALCYON_HEADER1) + return 1; + DRM_ERROR("Illegal DMA HALCYON_HEADER1 command\n"); + break; + case check_for_fire: + if ((cmd & HALCYON_FIREMASK) == HALCYON_FIRECMD) + return 1; + DRM_ERROR("Illegal DMA HALCYON_FIRECMD command\n"); + break; + case check_for_dummy: + if (HC_DUMMY == cmd) + return 0; + DRM_ERROR("Illegal DMA HC_DUMMY command\n"); + break; + case check_for_dd: + if (0xdddddddd == cmd) + return 0; + DRM_ERROR("Illegal DMA 0xdddddddd command\n"); + break; + case check_z_buffer_addr0: + cur_seq->unfinished = z_address; + cur_seq->z_addr = (cur_seq->z_addr & 0xFF000000) | + (cmd & 0x00FFFFFF); + return 0; + case check_z_buffer_addr1: + cur_seq->unfinished = z_address; + cur_seq->z_addr = (cur_seq->z_addr & 0x00FFFFFF) | + ((cmd & 0xFF) << 24); + return 0; + case check_z_buffer_addr_mode: + cur_seq->unfinished = z_address; + if ((cmd & 0x0000C000) == 0) + return 0; + DRM_ERROR("Attempt to place Z buffer in system memory\n"); + return 2; + case check_destination_addr0: + cur_seq->unfinished = dest_address; + cur_seq->d_addr = (cur_seq->d_addr & 0xFF000000) | + (cmd & 0x00FFFFFF); + return 0; + case check_destination_addr1: + cur_seq->unfinished = dest_address; + cur_seq->d_addr = (cur_seq->d_addr & 0x00FFFFFF) | + ((cmd & 0xFF) << 24); + return 0; + case check_destination_addr_mode: + cur_seq->unfinished = dest_address; + if ((cmd & 0x0000C000) == 0) + return 0; + DRM_ERROR + ("Attempt to place 3D drawing buffer in system memory\n"); + return 2; + case check_texture_addr0: + cur_seq->unfinished = tex_address; + tmp = (cmd >> 24); + tmp_addr = &cur_seq->t_addr[cur_seq->texture][tmp]; + *tmp_addr = (*tmp_addr & 0xFF000000) | (cmd & 0x00FFFFFF); + return 0; + case check_texture_addr1: + cur_seq->unfinished = tex_address; + tmp = ((cmd >> 24) - 0x20); + tmp += tmp << 1; + tmp_addr = &cur_seq->t_addr[cur_seq->texture][tmp]; + *tmp_addr = (*tmp_addr & 0x00FFFFFF) | ((cmd & 0xFF) << 24); + tmp_addr++; + *tmp_addr = (*tmp_addr & 0x00FFFFFF) | ((cmd & 0xFF00) << 16); + tmp_addr++; + *tmp_addr = (*tmp_addr & 0x00FFFFFF) | ((cmd & 0xFF0000) << 8); + return 0; + case check_texture_addr2: + cur_seq->unfinished = tex_address; + cur_seq->tex_level_lo[tmp = cur_seq->texture] = cmd & 0x3F; + cur_seq->tex_level_hi[tmp] = (cmd & 0xFC0) >> 6; + return 0; + case check_texture_addr3: + cur_seq->unfinished = tex_address; + tmp = ((cmd >> 24) - HC_SubA_HTXnL0Pit); + if (tmp == 0 && + (cmd & HC_HTXnEnPit_MASK)) { + cur_seq->pitch[cur_seq->texture][tmp] = + (cmd & HC_HTXnLnPit_MASK); + cur_seq->tex_npot[cur_seq->texture] = 1; + } else { + cur_seq->pitch[cur_seq->texture][tmp] = + (cmd & HC_HTXnLnPitE_MASK) >> HC_HTXnLnPitE_SHIFT; + cur_seq->tex_npot[cur_seq->texture] = 0; + if (cmd & 0x000FFFFF) { + DRM_ERROR + ("Unimplemented texture level 0 pitch mode.\n"); + return 2; + } + } + return 0; + case check_texture_addr4: + cur_seq->unfinished = tex_address; + tmp_addr = &cur_seq->t_addr[cur_seq->texture][9]; + *tmp_addr = (*tmp_addr & 0x00FFFFFF) | ((cmd & 0xFF) << 24); + return 0; + case check_texture_addr5: + case check_texture_addr6: + cur_seq->unfinished = tex_address; + /* + * Texture width. We don't care since we have the pitch. + */ + return 0; + case check_texture_addr7: + cur_seq->unfinished = tex_address; + tmp_addr = &(cur_seq->height[cur_seq->texture][0]); + tmp_addr[5] = 1 << ((cmd & 0x00F00000) >> 20); + tmp_addr[4] = 1 << ((cmd & 0x000F0000) >> 16); + tmp_addr[3] = 1 << ((cmd & 0x0000F000) >> 12); + tmp_addr[2] = 1 << ((cmd & 0x00000F00) >> 8); + tmp_addr[1] = 1 << ((cmd & 0x000000F0) >> 4); + tmp_addr[0] = 1 << (cmd & 0x0000000F); + return 0; + case check_texture_addr8: + cur_seq->unfinished = tex_address; + tmp_addr = &(cur_seq->height[cur_seq->texture][0]); + tmp_addr[9] = 1 << ((cmd & 0x0000F000) >> 12); + tmp_addr[8] = 1 << ((cmd & 0x00000F00) >> 8); + tmp_addr[7] = 1 << ((cmd & 0x000000F0) >> 4); + tmp_addr[6] = 1 << (cmd & 0x0000000F); + return 0; + case check_texture_addr_mode: + cur_seq->unfinished = tex_address; + if (2 == (tmp = cmd & 0x00000003)) { + DRM_ERROR + ("Attempt to fetch texture from system memory.\n"); + return 2; + } + cur_seq->agp_texture = (tmp == 3); + cur_seq->tex_palette_size[cur_seq->texture] = + (cmd >> 16) & 0x000000007; + return 0; + case check_for_vertex_count: + cur_seq->vertex_count = cmd & 0x0000FFFF; + return 0; + case check_number_texunits: + cur_seq->multitex = (cmd >> 3) & 1; + return 0; + default: + DRM_ERROR("Illegal DMA data: 0x%x\n", cmd); + return 2; + } + return 2; +} + +static __inline__ int +via_check_prim_list(uint32_t const **buffer, const uint32_t * buf_end, + drm_via_state_t *cur_seq) +{ + drm_via_private_t *dev_priv = + (drm_via_private_t *) cur_seq->dev->dev_private; + uint32_t a_fire, bcmd, dw_count; + int ret = 0; + int have_fire; + const uint32_t *buf = *buffer; + + while (buf < buf_end) { + have_fire = 0; + if ((buf_end - buf) < 2) { + DRM_ERROR + ("Unexpected termination of primitive list.\n"); + ret = 1; + break; + } + if ((*buf & HC_ACMD_MASK) != HC_ACMD_HCmdB) + break; + bcmd = *buf++; + if ((*buf & HC_ACMD_MASK) != HC_ACMD_HCmdA) { + DRM_ERROR("Expected Vertex List A command, got 0x%x\n", + *buf); + ret = 1; + break; + } + a_fire = + *buf++ | HC_HPLEND_MASK | HC_HPMValidN_MASK | + HC_HE3Fire_MASK; + + /* + * How many dwords per vertex ? + */ + + if (cur_seq->agp && ((bcmd & (0xF << 11)) == 0)) { + DRM_ERROR("Illegal B command vertex data for AGP.\n"); + ret = 1; + break; + } + + dw_count = 0; + if (bcmd & (1 << 7)) + dw_count += (cur_seq->multitex) ? 2 : 1; + if (bcmd & (1 << 8)) + dw_count += (cur_seq->multitex) ? 2 : 1; + if (bcmd & (1 << 9)) + dw_count++; + if (bcmd & (1 << 10)) + dw_count++; + if (bcmd & (1 << 11)) + dw_count++; + if (bcmd & (1 << 12)) + dw_count++; + if (bcmd & (1 << 13)) + dw_count++; + if (bcmd & (1 << 14)) + dw_count++; + + while (buf < buf_end) { + if (*buf == a_fire) { + if (dev_priv->num_fire_offsets >= + VIA_FIRE_BUF_SIZE) { + DRM_ERROR("Fire offset buffer full.\n"); + ret = 1; + break; + } + dev_priv->fire_offsets[dev_priv-> + num_fire_offsets++] = + buf; + have_fire = 1; + buf++; + if (buf < buf_end && *buf == a_fire) + buf++; + break; + } + if ((*buf == HALCYON_HEADER2) || + ((*buf & HALCYON_FIREMASK) == HALCYON_FIRECMD)) { + DRM_ERROR("Missing Vertex Fire command, " + "Stray Vertex Fire command or verifier " + "lost sync.\n"); + ret = 1; + break; + } + if ((ret = eat_words(&buf, buf_end, dw_count))) + break; + } + if (buf >= buf_end && !have_fire) { + DRM_ERROR("Missing Vertex Fire command or verifier " + "lost sync.\n"); + ret = 1; + break; + } + if (cur_seq->agp && ((buf - cur_seq->buf_start) & 0x01)) { + DRM_ERROR("AGP Primitive list end misaligned.\n"); + ret = 1; + break; + } + } + *buffer = buf; + return ret; +} + +static __inline__ verifier_state_t +via_check_header2(uint32_t const **buffer, const uint32_t *buf_end, + drm_via_state_t *hc_state) +{ + uint32_t cmd; + int hz_mode; + hazard_t hz; + const uint32_t *buf = *buffer; + const hazard_t *hz_table; + + if ((buf_end - buf) < 2) { + DRM_ERROR + ("Illegal termination of DMA HALCYON_HEADER2 sequence.\n"); + return state_error; + } + buf++; + cmd = (*buf++ & 0xFFFF0000) >> 16; + + switch (cmd) { + case HC_ParaType_CmdVdata: + if (via_check_prim_list(&buf, buf_end, hc_state)) + return state_error; + *buffer = buf; + return state_command; + case HC_ParaType_NotTex: + hz_table = table1; + break; + case HC_ParaType_Tex: + hc_state->texture = 0; + hz_table = table2; + break; + case (HC_ParaType_Tex | (HC_SubType_Tex1 << 8)): + hc_state->texture = 1; + hz_table = table2; + break; + case (HC_ParaType_Tex | (HC_SubType_TexGeneral << 8)): + hz_table = table3; + break; + case HC_ParaType_Auto: + if (eat_words(&buf, buf_end, 2)) + return state_error; + *buffer = buf; + return state_command; + case (HC_ParaType_Palette | (HC_SubType_Stipple << 8)): + if (eat_words(&buf, buf_end, 32)) + return state_error; + *buffer = buf; + return state_command; + case (HC_ParaType_Palette | (HC_SubType_TexPalette0 << 8)): + case (HC_ParaType_Palette | (HC_SubType_TexPalette1 << 8)): + DRM_ERROR("Texture palettes are rejected because of " + "lack of info how to determine their size.\n"); + return state_error; + case (HC_ParaType_Palette | (HC_SubType_FogTable << 8)): + DRM_ERROR("Fog factor palettes are rejected because of " + "lack of info how to determine their size.\n"); + return state_error; + default: + + /* + * There are some unimplemented HC_ParaTypes here, that + * need to be implemented if the Mesa driver is extended. + */ + + DRM_ERROR("Invalid or unimplemented HALCYON_HEADER2 " + "DMA subcommand: 0x%x. Previous dword: 0x%x\n", + cmd, *(buf - 2)); + *buffer = buf; + return state_error; + } + + while (buf < buf_end) { + cmd = *buf++; + if ((hz = hz_table[cmd >> 24])) { + if ((hz_mode = investigate_hazard(cmd, hz, hc_state))) { + if (hz_mode == 1) { + buf--; + break; + } + return state_error; + } + } else if (hc_state->unfinished && + finish_current_sequence(hc_state)) { + return state_error; + } + } + if (hc_state->unfinished && finish_current_sequence(hc_state)) + return state_error; + *buffer = buf; + return state_command; +} + +static __inline__ verifier_state_t +via_parse_header2(drm_via_private_t *dev_priv, uint32_t const **buffer, + const uint32_t *buf_end, int *fire_count) +{ + uint32_t cmd; + const uint32_t *buf = *buffer; + const uint32_t *next_fire; + int burst = 0; + + next_fire = dev_priv->fire_offsets[*fire_count]; + buf++; + cmd = (*buf & 0xFFFF0000) >> 16; + via_write(dev_priv, HC_REG_TRANS_SET + HC_REG_BASE, *buf++); + switch (cmd) { + case HC_ParaType_CmdVdata: + while ((buf < buf_end) && + (*fire_count < dev_priv->num_fire_offsets) && + (*buf & HC_ACMD_MASK) == HC_ACMD_HCmdB) { + while (buf <= next_fire) { + via_write(dev_priv, HC_REG_TRANS_SPACE + HC_REG_BASE + + (burst & 63), *buf++); + burst += 4; + } + if ((buf < buf_end) + && ((*buf & HALCYON_FIREMASK) == HALCYON_FIRECMD)) + buf++; + + if (++(*fire_count) < dev_priv->num_fire_offsets) + next_fire = dev_priv->fire_offsets[*fire_count]; + } + break; + default: + while (buf < buf_end) { + + if (*buf == HC_HEADER2 || + (*buf & HALCYON_HEADER1MASK) == HALCYON_HEADER1 || + (*buf & VIA_VIDEOMASK) == VIA_VIDEO_HEADER5 || + (*buf & VIA_VIDEOMASK) == VIA_VIDEO_HEADER6) + break; + + via_write(dev_priv, HC_REG_TRANS_SPACE + HC_REG_BASE + + (burst & 63), *buf++); + burst += 4; + } + } + *buffer = buf; + return state_command; +} + +static __inline__ int verify_mmio_address(uint32_t address) +{ + if ((address > 0x3FF) && (address < 0xC00)) { + DRM_ERROR("Invalid VIDEO DMA command. " + "Attempt to access 3D- or command burst area.\n"); + return 1; + } else if ((address > 0xCFF) && (address < 0x1300)) { + DRM_ERROR("Invalid VIDEO DMA command. " + "Attempt to access PCI DMA area.\n"); + return 1; + } else if (address > 0x13FF) { + DRM_ERROR("Invalid VIDEO DMA command. " + "Attempt to access VGA registers.\n"); + return 1; + } + return 0; +} + +static __inline__ int +verify_video_tail(uint32_t const **buffer, const uint32_t * buf_end, + uint32_t dwords) +{ + const uint32_t *buf = *buffer; + + if (buf_end - buf < dwords) { + DRM_ERROR("Illegal termination of video command.\n"); + return 1; + } + while (dwords--) { + if (*buf++) { + DRM_ERROR("Illegal video command tail.\n"); + return 1; + } + } + *buffer = buf; + return 0; +} + +static __inline__ verifier_state_t +via_check_header1(uint32_t const **buffer, const uint32_t * buf_end) +{ + uint32_t cmd; + const uint32_t *buf = *buffer; + verifier_state_t ret = state_command; + + while (buf < buf_end) { + cmd = *buf; + if ((cmd > ((0x3FF >> 2) | HALCYON_HEADER1)) && + (cmd < ((0xC00 >> 2) | HALCYON_HEADER1))) { + if ((cmd & HALCYON_HEADER1MASK) != HALCYON_HEADER1) + break; + DRM_ERROR("Invalid HALCYON_HEADER1 command. " + "Attempt to access 3D- or command burst area.\n"); + ret = state_error; + break; + } else if (cmd > ((0xCFF >> 2) | HALCYON_HEADER1)) { + if ((cmd & HALCYON_HEADER1MASK) != HALCYON_HEADER1) + break; + DRM_ERROR("Invalid HALCYON_HEADER1 command. " + "Attempt to access VGA registers.\n"); + ret = state_error; + break; + } else { + buf += 2; + } + } + *buffer = buf; + return ret; +} + +static __inline__ verifier_state_t +via_parse_header1(drm_via_private_t *dev_priv, uint32_t const **buffer, + const uint32_t *buf_end) +{ + register uint32_t cmd; + const uint32_t *buf = *buffer; + + while (buf < buf_end) { + cmd = *buf; + if ((cmd & HALCYON_HEADER1MASK) != HALCYON_HEADER1) + break; + via_write(dev_priv, (cmd & ~HALCYON_HEADER1MASK) << 2, *++buf); + buf++; + } + *buffer = buf; + return state_command; +} + +static __inline__ verifier_state_t +via_check_vheader5(uint32_t const **buffer, const uint32_t *buf_end) +{ + uint32_t data; + const uint32_t *buf = *buffer; + + if (buf_end - buf < 4) { + DRM_ERROR("Illegal termination of video header5 command\n"); + return state_error; + } + + data = *buf++ & ~VIA_VIDEOMASK; + if (verify_mmio_address(data)) + return state_error; + + data = *buf++; + if (*buf++ != 0x00F50000) { + DRM_ERROR("Illegal header5 header data\n"); + return state_error; + } + if (*buf++ != 0x00000000) { + DRM_ERROR("Illegal header5 header data\n"); + return state_error; + } + if (eat_words(&buf, buf_end, data)) + return state_error; + if ((data & 3) && verify_video_tail(&buf, buf_end, 4 - (data & 3))) + return state_error; + *buffer = buf; + return state_command; + +} + +static __inline__ verifier_state_t +via_parse_vheader5(drm_via_private_t *dev_priv, uint32_t const **buffer, + const uint32_t *buf_end) +{ + uint32_t addr, count, i; + const uint32_t *buf = *buffer; + + addr = *buf++ & ~VIA_VIDEOMASK; + i = count = *buf; + buf += 3; + while (i--) + via_write(dev_priv, addr, *buf++); + if (count & 3) + buf += 4 - (count & 3); + *buffer = buf; + return state_command; +} + +static __inline__ verifier_state_t +via_check_vheader6(uint32_t const **buffer, const uint32_t * buf_end) +{ + uint32_t data; + const uint32_t *buf = *buffer; + uint32_t i; + + if (buf_end - buf < 4) { + DRM_ERROR("Illegal termination of video header6 command\n"); + return state_error; + } + buf++; + data = *buf++; + if (*buf++ != 0x00F60000) { + DRM_ERROR("Illegal header6 header data\n"); + return state_error; + } + if (*buf++ != 0x00000000) { + DRM_ERROR("Illegal header6 header data\n"); + return state_error; + } + if ((buf_end - buf) < (data << 1)) { + DRM_ERROR("Illegal termination of video header6 command\n"); + return state_error; + } + for (i = 0; i < data; ++i) { + if (verify_mmio_address(*buf++)) + return state_error; + buf++; + } + data <<= 1; + if ((data & 3) && verify_video_tail(&buf, buf_end, 4 - (data & 3))) + return state_error; + *buffer = buf; + return state_command; +} + +static __inline__ verifier_state_t +via_parse_vheader6(drm_via_private_t *dev_priv, uint32_t const **buffer, + const uint32_t *buf_end) +{ + + uint32_t addr, count, i; + const uint32_t *buf = *buffer; + + i = count = *++buf; + buf += 3; + while (i--) { + addr = *buf++; + via_write(dev_priv, addr, *buf++); + } + count <<= 1; + if (count & 3) + buf += 4 - (count & 3); + *buffer = buf; + return state_command; +} + +int +via_verify_command_stream(const uint32_t * buf, unsigned int size, + struct drm_device * dev, int agp) +{ + + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + drm_via_state_t *hc_state = &dev_priv->hc_state; + drm_via_state_t saved_state = *hc_state; + uint32_t cmd; + const uint32_t *buf_end = buf + (size >> 2); + verifier_state_t state = state_command; + int cme_video; + int supported_3d; + + cme_video = (dev_priv->chipset == VIA_PRO_GROUP_A || + dev_priv->chipset == VIA_DX9_0); + + supported_3d = dev_priv->chipset != VIA_DX9_0; + + hc_state->dev = dev; + hc_state->unfinished = no_sequence; + hc_state->map_cache = NULL; + hc_state->agp = agp; + hc_state->buf_start = buf; + dev_priv->num_fire_offsets = 0; + + while (buf < buf_end) { + + switch (state) { + case state_header2: + state = via_check_header2(&buf, buf_end, hc_state); + break; + case state_header1: + state = via_check_header1(&buf, buf_end); + break; + case state_vheader5: + state = via_check_vheader5(&buf, buf_end); + break; + case state_vheader6: + state = via_check_vheader6(&buf, buf_end); + break; + case state_command: + cmd = *buf; + if ((cmd == HALCYON_HEADER2) && supported_3d) + state = state_header2; + else if ((cmd & HALCYON_HEADER1MASK) == HALCYON_HEADER1) + state = state_header1; + else if (cme_video + && (cmd & VIA_VIDEOMASK) == VIA_VIDEO_HEADER5) + state = state_vheader5; + else if (cme_video + && (cmd & VIA_VIDEOMASK) == VIA_VIDEO_HEADER6) + state = state_vheader6; + else if ((cmd == HALCYON_HEADER2) && !supported_3d) { + DRM_ERROR("Accelerated 3D is not supported on this chipset yet.\n"); + state = state_error; + } else { + DRM_ERROR + ("Invalid / Unimplemented DMA HEADER command. 0x%x\n", + cmd); + state = state_error; + } + break; + case state_error: + default: + *hc_state = saved_state; + return -EINVAL; + } + } + if (state == state_error) { + *hc_state = saved_state; + return -EINVAL; + } + return 0; +} + +int +via_parse_command_stream(struct drm_device *dev, const uint32_t *buf, + unsigned int size) +{ + + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + uint32_t cmd; + const uint32_t *buf_end = buf + (size >> 2); + verifier_state_t state = state_command; + int fire_count = 0; + + while (buf < buf_end) { + + switch (state) { + case state_header2: + state = + via_parse_header2(dev_priv, &buf, buf_end, + &fire_count); + break; + case state_header1: + state = via_parse_header1(dev_priv, &buf, buf_end); + break; + case state_vheader5: + state = via_parse_vheader5(dev_priv, &buf, buf_end); + break; + case state_vheader6: + state = via_parse_vheader6(dev_priv, &buf, buf_end); + break; + case state_command: + cmd = *buf; + if (cmd == HALCYON_HEADER2) + state = state_header2; + else if ((cmd & HALCYON_HEADER1MASK) == HALCYON_HEADER1) + state = state_header1; + else if ((cmd & VIA_VIDEOMASK) == VIA_VIDEO_HEADER5) + state = state_vheader5; + else if ((cmd & VIA_VIDEOMASK) == VIA_VIDEO_HEADER6) + state = state_vheader6; + else { + DRM_ERROR + ("Invalid / Unimplemented DMA HEADER command. 0x%x\n", + cmd); + state = state_error; + } + break; + case state_error: + default: + return -EINVAL; + } + } + if (state == state_error) + return -EINVAL; + return 0; +} + +static void +setup_hazard_table(hz_init_t init_table[], hazard_t table[], int size) +{ + int i; + + for (i = 0; i < 256; ++i) + table[i] = forbidden_command; + + for (i = 0; i < size; ++i) + table[init_table[i].code] = init_table[i].hz; +} + +void via_init_command_verifier(void) +{ + setup_hazard_table(init_table1, table1, ARRAY_SIZE(init_table1)); + setup_hazard_table(init_table2, table2, ARRAY_SIZE(init_table2)); + setup_hazard_table(init_table3, table3, ARRAY_SIZE(init_table3)); +} + +/* + * Legacy file: via_video.c + * + * Copyright 2005 Thomas Hellstrom. All Rights Reserved. + * + * Author: Thomas Hellstrom 2005. + * + * Video and XvMC related functions. + */ + +void via_init_futex(drm_via_private_t *dev_priv) +{ + unsigned int i; + + DRM_DEBUG("\n"); + + for (i = 0; i < VIA_NR_XVMC_LOCKS; ++i) { + init_waitqueue_head(&(dev_priv->decoder_queue[i])); + XVMCLOCKPTR(dev_priv->sarea_priv, i)->lock = 0; + } +} + +void via_cleanup_futex(drm_via_private_t *dev_priv) +{ +} + +void via_release_futex(drm_via_private_t *dev_priv, int context) +{ + unsigned int i; + volatile int *lock; + + if (!dev_priv->sarea_priv) + return; + + for (i = 0; i < VIA_NR_XVMC_LOCKS; ++i) { + lock = (volatile int *)XVMCLOCKPTR(dev_priv->sarea_priv, i); + if ((_DRM_LOCKING_CONTEXT(*lock) == context)) { + if (_DRM_LOCK_IS_HELD(*lock) + && (*lock & _DRM_LOCK_CONT)) { + wake_up(&(dev_priv->decoder_queue[i])); + } + *lock = 0; + } + } +} + +int via_decoder_futex(struct drm_device *dev, void *data, struct drm_file *file_priv) +{ + drm_via_futex_t *fx = data; + volatile int *lock; + drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; + drm_via_sarea_t *sAPriv = dev_priv->sarea_priv; + int ret = 0; + + DRM_DEBUG("\n"); + + if (fx->lock >= VIA_NR_XVMC_LOCKS) + return -EFAULT; + + lock = (volatile int *)XVMCLOCKPTR(sAPriv, fx->lock); + + switch (fx->func) { + case VIA_FUTEX_WAIT: + VIA_WAIT_ON(ret, dev_priv->decoder_queue[fx->lock], + (fx->ms / 10) * (HZ / 100), *lock != fx->val); + return ret; + case VIA_FUTEX_WAKE: + wake_up(&(dev_priv->decoder_queue[fx->lock])); + return 0; + } + return 0; +} diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c deleted file mode 100644 index a9f6b0c11966..000000000000 --- a/drivers/gpu/drm/via/via_map.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Copyright 1998-2003 VIA Technologies, Inc. All Rights Reserved. - * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * VIA, S3 GRAPHICS, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -#include <linux/pci.h> - -#include <drm/drm_device.h> -#include <drm/drm_vblank.h> -#include <drm/via_drm.h> - -#include "via_drv.h" - -static int via_do_init_map(struct drm_device *dev, drm_via_init_t *init) -{ - drm_via_private_t *dev_priv = dev->dev_private; - - DRM_DEBUG("\n"); - - dev_priv->sarea = drm_legacy_getsarea(dev); - if (!dev_priv->sarea) { - DRM_ERROR("could not find sarea!\n"); - dev->dev_private = (void *)dev_priv; - via_do_cleanup_map(dev); - return -EINVAL; - } - - dev_priv->fb = drm_legacy_findmap(dev, init->fb_offset); - if (!dev_priv->fb) { - DRM_ERROR("could not find framebuffer!\n"); - dev->dev_private = (void *)dev_priv; - via_do_cleanup_map(dev); - return -EINVAL; - } - dev_priv->mmio = drm_legacy_findmap(dev, init->mmio_offset); - if (!dev_priv->mmio) { - DRM_ERROR("could not find mmio region!\n"); - dev->dev_private = (void *)dev_priv; - via_do_cleanup_map(dev); - return -EINVAL; - } - - dev_priv->sarea_priv = - (drm_via_sarea_t *) ((u8 *) dev_priv->sarea->handle + - init->sarea_priv_offset); - - dev_priv->agpAddr = init->agpAddr; - - via_init_futex(dev_priv); - - via_init_dmablit(dev); - - dev->dev_private = (void *)dev_priv; - return 0; -} - -int via_do_cleanup_map(struct drm_device *dev) -{ - via_dma_cleanup(dev); - - return 0; -} - -int via_map_init(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_init_t *init = data; - - DRM_DEBUG("\n"); - - switch (init->func) { - case VIA_INIT_MAP: - return via_do_init_map(dev, init); - case VIA_CLEANUP_MAP: - return via_do_cleanup_map(dev); - } - - return -EINVAL; -} - -int via_driver_load(struct drm_device *dev, unsigned long chipset) -{ - struct pci_dev *pdev = to_pci_dev(dev->dev); - drm_via_private_t *dev_priv; - int ret = 0; - - dev_priv = kzalloc(sizeof(drm_via_private_t), GFP_KERNEL); - if (dev_priv == NULL) - return -ENOMEM; - - idr_init(&dev_priv->object_idr); - dev->dev_private = (void *)dev_priv; - - dev_priv->chipset = chipset; - - pci_set_master(pdev); - - ret = drm_vblank_init(dev, 1); - if (ret) { - kfree(dev_priv); - return ret; - } - - return 0; -} - -void via_driver_unload(struct drm_device *dev) -{ - drm_via_private_t *dev_priv = dev->dev_private; - - idr_destroy(&dev_priv->object_idr); - - kfree(dev_priv); -} diff --git a/drivers/gpu/drm/via/via_mm.c b/drivers/gpu/drm/via/via_mm.c deleted file mode 100644 index c9afa1a51f23..000000000000 --- a/drivers/gpu/drm/via/via_mm.c +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Copyright 2006 Tungsten Graphics Inc., Bismarck, ND., USA. - * All rights reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ -/* - * Authors: Thomas Hellström <thomas-at-tungstengraphics-dot-com> - */ - -#include <linux/slab.h> - -#include <drm/drm_device.h> -#include <drm/drm_file.h> -#include <drm/via_drm.h> - -#include "via_drv.h" - -#define VIA_MM_ALIGN_SHIFT 4 -#define VIA_MM_ALIGN_MASK ((1 << VIA_MM_ALIGN_SHIFT) - 1) - -struct via_memblock { - struct drm_mm_node mm_node; - struct list_head owner_list; -}; - -int via_agp_init(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_agp_t *agp = data; - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - - mutex_lock(&dev->struct_mutex); - drm_mm_init(&dev_priv->agp_mm, 0, agp->size >> VIA_MM_ALIGN_SHIFT); - - dev_priv->agp_initialized = 1; - dev_priv->agp_offset = agp->offset; - mutex_unlock(&dev->struct_mutex); - - DRM_DEBUG("offset = %u, size = %u\n", agp->offset, agp->size); - return 0; -} - -int via_fb_init(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_fb_t *fb = data; - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - - mutex_lock(&dev->struct_mutex); - drm_mm_init(&dev_priv->vram_mm, 0, fb->size >> VIA_MM_ALIGN_SHIFT); - - dev_priv->vram_initialized = 1; - dev_priv->vram_offset = fb->offset; - - mutex_unlock(&dev->struct_mutex); - DRM_DEBUG("offset = %u, size = %u\n", fb->offset, fb->size); - - return 0; - -} - -int via_final_context(struct drm_device *dev, int context) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - - via_release_futex(dev_priv, context); - - /* Linux specific until context tracking code gets ported to BSD */ - /* Last context, perform cleanup */ - if (list_is_singular(&dev->ctxlist)) { - DRM_DEBUG("Last Context\n"); - drm_legacy_irq_uninstall(dev); - via_cleanup_futex(dev_priv); - via_do_cleanup_map(dev); - } - return 1; -} - -void via_lastclose(struct drm_device *dev) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - - if (!dev_priv) - return; - - mutex_lock(&dev->struct_mutex); - if (dev_priv->vram_initialized) { - drm_mm_takedown(&dev_priv->vram_mm); - dev_priv->vram_initialized = 0; - } - if (dev_priv->agp_initialized) { - drm_mm_takedown(&dev_priv->agp_mm); - dev_priv->agp_initialized = 0; - } - mutex_unlock(&dev->struct_mutex); -} - -int via_mem_alloc(struct drm_device *dev, void *data, - struct drm_file *file) -{ - drm_via_mem_t *mem = data; - int retval = 0, user_key; - struct via_memblock *item; - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - struct via_file_private *file_priv = file->driver_priv; - unsigned long tmpSize; - - if (mem->type > VIA_MEM_AGP) { - DRM_ERROR("Unknown memory type allocation\n"); - return -EINVAL; - } - mutex_lock(&dev->struct_mutex); - if (0 == ((mem->type == VIA_MEM_VIDEO) ? dev_priv->vram_initialized : - dev_priv->agp_initialized)) { - mutex_unlock(&dev->struct_mutex); - DRM_ERROR - ("Attempt to allocate from uninitialized memory manager.\n"); - return -EINVAL; - } - - item = kzalloc(sizeof(*item), GFP_KERNEL); - if (!item) { - retval = -ENOMEM; - goto fail_alloc; - } - - tmpSize = (mem->size + VIA_MM_ALIGN_MASK) >> VIA_MM_ALIGN_SHIFT; - if (mem->type == VIA_MEM_AGP) - retval = drm_mm_insert_node(&dev_priv->agp_mm, - &item->mm_node, - tmpSize); - else - retval = drm_mm_insert_node(&dev_priv->vram_mm, - &item->mm_node, - tmpSize); - if (retval) - goto fail_alloc; - - retval = idr_alloc(&dev_priv->object_idr, item, 1, 0, GFP_KERNEL); - if (retval < 0) - goto fail_idr; - user_key = retval; - - list_add(&item->owner_list, &file_priv->obj_list); - mutex_unlock(&dev->struct_mutex); - - mem->offset = ((mem->type == VIA_MEM_VIDEO) ? - dev_priv->vram_offset : dev_priv->agp_offset) + - ((item->mm_node.start) << VIA_MM_ALIGN_SHIFT); - mem->index = user_key; - - return 0; - -fail_idr: - drm_mm_remove_node(&item->mm_node); -fail_alloc: - kfree(item); - mutex_unlock(&dev->struct_mutex); - - mem->offset = 0; - mem->size = 0; - mem->index = 0; - DRM_DEBUG("Video memory allocation failed\n"); - - return retval; -} - -int via_mem_free(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_private_t *dev_priv = dev->dev_private; - drm_via_mem_t *mem = data; - struct via_memblock *obj; - - mutex_lock(&dev->struct_mutex); - obj = idr_find(&dev_priv->object_idr, mem->index); - if (obj == NULL) { - mutex_unlock(&dev->struct_mutex); - return -EINVAL; - } - - idr_remove(&dev_priv->object_idr, mem->index); - list_del(&obj->owner_list); - drm_mm_remove_node(&obj->mm_node); - kfree(obj); - mutex_unlock(&dev->struct_mutex); - - DRM_DEBUG("free = 0x%lx\n", mem->index); - - return 0; -} - - -void via_reclaim_buffers_locked(struct drm_device *dev, - struct drm_file *file) -{ - struct via_file_private *file_priv = file->driver_priv; - struct via_memblock *entry, *next; - - if (!(dev->master && file->master->lock.hw_lock)) - return; - - drm_legacy_idlelock_take(&file->master->lock); - - mutex_lock(&dev->struct_mutex); - if (list_empty(&file_priv->obj_list)) { - mutex_unlock(&dev->struct_mutex); - drm_legacy_idlelock_release(&file->master->lock); - - return; - } - - via_driver_dma_quiescent(dev); - - list_for_each_entry_safe(entry, next, &file_priv->obj_list, - owner_list) { - list_del(&entry->owner_list); - drm_mm_remove_node(&entry->mm_node); - kfree(entry); - } - mutex_unlock(&dev->struct_mutex); - - drm_legacy_idlelock_release(&file->master->lock); - - return; -} diff --git a/drivers/gpu/drm/via/via_verifier.c b/drivers/gpu/drm/via/via_verifier.c deleted file mode 100644 index 3d6e3a70f318..000000000000 --- a/drivers/gpu/drm/via/via_verifier.c +++ /dev/null @@ -1,1110 +0,0 @@ -/* - * Copyright 2004 The Unichrome Project. All Rights Reserved. - * Copyright 2005 Thomas Hellstrom. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE AUTHOR(S), AND/OR THE COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Author: Thomas Hellstrom 2004, 2005. - * This code was written using docs obtained under NDA from VIA Inc. - * - * Don't run this code directly on an AGP buffer. Due to cache problems it will - * be very slow. - */ - -#include <drm/drm_device.h> -#include <drm/drm_legacy.h> -#include <drm/via_drm.h> - -#include "via_3d_reg.h" -#include "via_drv.h" -#include "via_verifier.h" - -typedef enum { - state_command, - state_header2, - state_header1, - state_vheader5, - state_vheader6, - state_error -} verifier_state_t; - -typedef enum { - no_check = 0, - check_for_header2, - check_for_header1, - check_for_header2_err, - check_for_header1_err, - check_for_fire, - check_z_buffer_addr0, - check_z_buffer_addr1, - check_z_buffer_addr_mode, - check_destination_addr0, - check_destination_addr1, - check_destination_addr_mode, - check_for_dummy, - check_for_dd, - check_texture_addr0, - check_texture_addr1, - check_texture_addr2, - check_texture_addr3, - check_texture_addr4, - check_texture_addr5, - check_texture_addr6, - check_texture_addr7, - check_texture_addr8, - check_texture_addr_mode, - check_for_vertex_count, - check_number_texunits, - forbidden_command -} hazard_t; - -/* - * Associates each hazard above with a possible multi-command - * sequence. For example an address that is split over multiple - * commands and that needs to be checked at the first command - * that does not include any part of the address. - */ - -static drm_via_sequence_t seqs[] = { - no_sequence, - no_sequence, - no_sequence, - no_sequence, - no_sequence, - no_sequence, - z_address, - z_address, - z_address, - dest_address, - dest_address, - dest_address, - no_sequence, - no_sequence, - tex_address, - tex_address, - tex_address, - tex_address, - tex_address, - tex_address, - tex_address, - tex_address, - tex_address, - tex_address, - no_sequence -}; - -typedef struct { - unsigned int code; - hazard_t hz; -} hz_init_t; - -static hz_init_t init_table1[] = { - {0xf2, check_for_header2_err}, - {0xf0, check_for_header1_err}, - {0xee, check_for_fire}, - {0xcc, check_for_dummy}, - {0xdd, check_for_dd}, - {0x00, no_check}, - {0x10, check_z_buffer_addr0}, - {0x11, check_z_buffer_addr1}, - {0x12, check_z_buffer_addr_mode}, - {0x13, no_check}, - {0x14, no_check}, - {0x15, no_check}, - {0x23, no_check}, - {0x24, no_check}, - {0x33, no_check}, - {0x34, no_check}, - {0x35, no_check}, - {0x36, no_check}, - {0x37, no_check}, - {0x38, no_check}, - {0x39, no_check}, - {0x3A, no_check}, - {0x3B, no_check}, - {0x3C, no_check}, - {0x3D, no_check}, - {0x3E, no_check}, - {0x40, check_destination_addr0}, - {0x41, check_destination_addr1}, - {0x42, check_destination_addr_mode}, - {0x43, no_check}, - {0x44, no_check}, - {0x50, no_check}, - {0x51, no_check}, - {0x52, no_check}, - {0x53, no_check}, - {0x54, no_check}, - {0x55, no_check}, - {0x56, no_check}, - {0x57, no_check}, - {0x58, no_check}, - {0x70, no_check}, - {0x71, no_check}, - {0x78, no_check}, - {0x79, no_check}, - {0x7A, no_check}, - {0x7B, no_check}, - {0x7C, no_check}, - {0x7D, check_for_vertex_count} -}; - -static hz_init_t init_table2[] = { - {0xf2, check_for_header2_err}, - {0xf0, check_for_header1_err}, - {0xee, check_for_fire}, - {0xcc, check_for_dummy}, - {0x00, check_texture_addr0}, - {0x01, check_texture_addr0}, - {0x02, check_texture_addr0}, - {0x03, check_texture_addr0}, - {0x04, check_texture_addr0}, - {0x05, check_texture_addr0}, - {0x06, check_texture_addr0}, - {0x07, check_texture_addr0}, - {0x08, check_texture_addr0}, - {0x09, check_texture_addr0}, - {0x20, check_texture_addr1}, - {0x21, check_texture_addr1}, - {0x22, check_texture_addr1}, - {0x23, check_texture_addr4}, - {0x2B, check_texture_addr3}, - {0x2C, check_texture_addr3}, - {0x2D, check_texture_addr3}, - {0x2E, check_texture_addr3}, - {0x2F, check_texture_addr3}, - {0x30, check_texture_addr3}, - {0x31, check_texture_addr3}, - {0x32, check_texture_addr3}, - {0x33, check_texture_addr3}, - {0x34, check_texture_addr3}, - {0x4B, check_texture_addr5}, - {0x4C, check_texture_addr6}, - {0x51, check_texture_addr7}, - {0x52, check_texture_addr8}, - {0x77, check_texture_addr2}, - {0x78, no_check}, - {0x79, no_check}, - {0x7A, no_check}, - {0x7B, check_texture_addr_mode}, - {0x7C, no_check}, - {0x7D, no_check}, - {0x7E, no_check}, - {0x7F, no_check}, - {0x80, no_check}, - {0x81, no_check}, - {0x82, no_check}, - {0x83, no_check}, - {0x85, no_check}, - {0x86, no_check}, - {0x87, no_check}, - {0x88, no_check}, - {0x89, no_check}, - {0x8A, no_check}, - {0x90, no_check}, - {0x91, no_check}, - {0x92, no_check}, - {0x93, no_check} -}; - -static hz_init_t init_table3[] = { - {0xf2, check_for_header2_err}, - {0xf0, check_for_header1_err}, - {0xcc, check_for_dummy}, - {0x00, check_number_texunits} -}; - -static hazard_t table1[256]; -static hazard_t table2[256]; -static hazard_t table3[256]; - -static __inline__ int -eat_words(const uint32_t **buf, const uint32_t *buf_end, unsigned num_words) -{ - if ((buf_end - *buf) >= num_words) { - *buf += num_words; - return 0; - } - DRM_ERROR("Illegal termination of DMA command buffer\n"); - return 1; -} - -/* - * Partially stolen from drm_memory.h - */ - -static __inline__ drm_local_map_t *via_drm_lookup_agp_map(drm_via_state_t *seq, - unsigned long offset, - unsigned long size, - struct drm_device *dev) -{ - struct drm_map_list *r_list; - drm_local_map_t *map = seq->map_cache; - - if (map && map->offset <= offset - && (offset + size) <= (map->offset + map->size)) { - return map; - } - - list_for_each_entry(r_list, &dev->maplist, head) { - map = r_list->map; - if (!map) - continue; - if (map->offset <= offset - && (offset + size) <= (map->offset + map->size) - && !(map->flags & _DRM_RESTRICTED) - && (map->type == _DRM_AGP)) { - seq->map_cache = map; - return map; - } - } - return NULL; -} - -/* - * Require that all AGP texture levels reside in the same AGP map which should - * be mappable by the client. This is not a big restriction. - * FIXME: To actually enforce this security policy strictly, drm_rmmap - * would have to wait for dma quiescent before removing an AGP map. - * The via_drm_lookup_agp_map call in reality seems to take - * very little CPU time. - */ - -static __inline__ int finish_current_sequence(drm_via_state_t * cur_seq) -{ - switch (cur_seq->unfinished) { - case z_address: - DRM_DEBUG("Z Buffer start address is 0x%x\n", cur_seq->z_addr); - break; - case dest_address: - DRM_DEBUG("Destination start address is 0x%x\n", - cur_seq->d_addr); - break; - case tex_address: - if (cur_seq->agp_texture) { - unsigned start = - cur_seq->tex_level_lo[cur_seq->texture]; - unsigned end = cur_seq->tex_level_hi[cur_seq->texture]; - unsigned long lo = ~0, hi = 0, tmp; - uint32_t *addr, *pitch, *height, tex; - unsigned i; - int npot; - - if (end > 9) - end = 9; - if (start > 9) - start = 9; - - addr = - &(cur_seq->t_addr[tex = cur_seq->texture][start]); - pitch = &(cur_seq->pitch[tex][start]); - height = &(cur_seq->height[tex][start]); - npot = cur_seq->tex_npot[tex]; - for (i = start; i <= end; ++i) { - tmp = *addr++; - if (tmp < lo) - lo = tmp; - if (i == 0 && npot) - tmp += (*height++ * *pitch++); - else - tmp += (*height++ << *pitch++); - if (tmp > hi) - hi = tmp; - } - - if (!via_drm_lookup_agp_map - (cur_seq, lo, hi - lo, cur_seq->dev)) { - DRM_ERROR - ("AGP texture is not in allowed map\n"); - return 2; - } - } - break; - default: - break; - } - cur_seq->unfinished = no_sequence; - return 0; -} - -static __inline__ int -investigate_hazard(uint32_t cmd, hazard_t hz, drm_via_state_t *cur_seq) -{ - register uint32_t tmp, *tmp_addr; - - if (cur_seq->unfinished && (cur_seq->unfinished != seqs[hz])) { - int ret; - if ((ret = finish_current_sequence(cur_seq))) - return ret; - } - - switch (hz) { - case check_for_header2: - if (cmd == HALCYON_HEADER2) - return 1; - return 0; - case check_for_header1: - if ((cmd & HALCYON_HEADER1MASK) == HALCYON_HEADER1) - return 1; - return 0; - case check_for_header2_err: - if (cmd == HALCYON_HEADER2) - return 1; - DRM_ERROR("Illegal DMA HALCYON_HEADER2 command\n"); - break; - case check_for_header1_err: - if ((cmd & HALCYON_HEADER1MASK) == HALCYON_HEADER1) - return 1; - DRM_ERROR("Illegal DMA HALCYON_HEADER1 command\n"); - break; - case check_for_fire: - if ((cmd & HALCYON_FIREMASK) == HALCYON_FIRECMD) - return 1; - DRM_ERROR("Illegal DMA HALCYON_FIRECMD command\n"); - break; - case check_for_dummy: - if (HC_DUMMY == cmd) - return 0; - DRM_ERROR("Illegal DMA HC_DUMMY command\n"); - break; - case check_for_dd: - if (0xdddddddd == cmd) - return 0; - DRM_ERROR("Illegal DMA 0xdddddddd command\n"); - break; - case check_z_buffer_addr0: - cur_seq->unfinished = z_address; - cur_seq->z_addr = (cur_seq->z_addr & 0xFF000000) | - (cmd & 0x00FFFFFF); - return 0; - case check_z_buffer_addr1: - cur_seq->unfinished = z_address; - cur_seq->z_addr = (cur_seq->z_addr & 0x00FFFFFF) | - ((cmd & 0xFF) << 24); - return 0; - case check_z_buffer_addr_mode: - cur_seq->unfinished = z_address; - if ((cmd & 0x0000C000) == 0) - return 0; - DRM_ERROR("Attempt to place Z buffer in system memory\n"); - return 2; - case check_destination_addr0: - cur_seq->unfinished = dest_address; - cur_seq->d_addr = (cur_seq->d_addr & 0xFF000000) | - (cmd & 0x00FFFFFF); - return 0; - case check_destination_addr1: - cur_seq->unfinished = dest_address; - cur_seq->d_addr = (cur_seq->d_addr & 0x00FFFFFF) | - ((cmd & 0xFF) << 24); - return 0; - case check_destination_addr_mode: - cur_seq->unfinished = dest_address; - if ((cmd & 0x0000C000) == 0) - return 0; - DRM_ERROR - ("Attempt to place 3D drawing buffer in system memory\n"); - return 2; - case check_texture_addr0: - cur_seq->unfinished = tex_address; - tmp = (cmd >> 24); - tmp_addr = &cur_seq->t_addr[cur_seq->texture][tmp]; - *tmp_addr = (*tmp_addr & 0xFF000000) | (cmd & 0x00FFFFFF); - return 0; - case check_texture_addr1: - cur_seq->unfinished = tex_address; - tmp = ((cmd >> 24) - 0x20); - tmp += tmp << 1; - tmp_addr = &cur_seq->t_addr[cur_seq->texture][tmp]; - *tmp_addr = (*tmp_addr & 0x00FFFFFF) | ((cmd & 0xFF) << 24); - tmp_addr++; - *tmp_addr = (*tmp_addr & 0x00FFFFFF) | ((cmd & 0xFF00) << 16); - tmp_addr++; - *tmp_addr = (*tmp_addr & 0x00FFFFFF) | ((cmd & 0xFF0000) << 8); - return 0; - case check_texture_addr2: - cur_seq->unfinished = tex_address; - cur_seq->tex_level_lo[tmp = cur_seq->texture] = cmd & 0x3F; - cur_seq->tex_level_hi[tmp] = (cmd & 0xFC0) >> 6; - return 0; - case check_texture_addr3: - cur_seq->unfinished = tex_address; - tmp = ((cmd >> 24) - HC_SubA_HTXnL0Pit); - if (tmp == 0 && - (cmd & HC_HTXnEnPit_MASK)) { - cur_seq->pitch[cur_seq->texture][tmp] = - (cmd & HC_HTXnLnPit_MASK); - cur_seq->tex_npot[cur_seq->texture] = 1; - } else { - cur_seq->pitch[cur_seq->texture][tmp] = - (cmd & HC_HTXnLnPitE_MASK) >> HC_HTXnLnPitE_SHIFT; - cur_seq->tex_npot[cur_seq->texture] = 0; - if (cmd & 0x000FFFFF) { - DRM_ERROR - ("Unimplemented texture level 0 pitch mode.\n"); - return 2; - } - } - return 0; - case check_texture_addr4: - cur_seq->unfinished = tex_address; - tmp_addr = &cur_seq->t_addr[cur_seq->texture][9]; - *tmp_addr = (*tmp_addr & 0x00FFFFFF) | ((cmd & 0xFF) << 24); - return 0; - case check_texture_addr5: - case check_texture_addr6: - cur_seq->unfinished = tex_address; - /* - * Texture width. We don't care since we have the pitch. - */ - return 0; - case check_texture_addr7: - cur_seq->unfinished = tex_address; - tmp_addr = &(cur_seq->height[cur_seq->texture][0]); - tmp_addr[5] = 1 << ((cmd & 0x00F00000) >> 20); - tmp_addr[4] = 1 << ((cmd & 0x000F0000) >> 16); - tmp_addr[3] = 1 << ((cmd & 0x0000F000) >> 12); - tmp_addr[2] = 1 << ((cmd & 0x00000F00) >> 8); - tmp_addr[1] = 1 << ((cmd & 0x000000F0) >> 4); - tmp_addr[0] = 1 << (cmd & 0x0000000F); - return 0; - case check_texture_addr8: - cur_seq->unfinished = tex_address; - tmp_addr = &(cur_seq->height[cur_seq->texture][0]); - tmp_addr[9] = 1 << ((cmd & 0x0000F000) >> 12); - tmp_addr[8] = 1 << ((cmd & 0x00000F00) >> 8); - tmp_addr[7] = 1 << ((cmd & 0x000000F0) >> 4); - tmp_addr[6] = 1 << (cmd & 0x0000000F); - return 0; - case check_texture_addr_mode: - cur_seq->unfinished = tex_address; - if (2 == (tmp = cmd & 0x00000003)) { - DRM_ERROR - ("Attempt to fetch texture from system memory.\n"); - return 2; - } - cur_seq->agp_texture = (tmp == 3); - cur_seq->tex_palette_size[cur_seq->texture] = - (cmd >> 16) & 0x000000007; - return 0; - case check_for_vertex_count: - cur_seq->vertex_count = cmd & 0x0000FFFF; - return 0; - case check_number_texunits: - cur_seq->multitex = (cmd >> 3) & 1; - return 0; - default: - DRM_ERROR("Illegal DMA data: 0x%x\n", cmd); - return 2; - } - return 2; -} - -static __inline__ int -via_check_prim_list(uint32_t const **buffer, const uint32_t * buf_end, - drm_via_state_t *cur_seq) -{ - drm_via_private_t *dev_priv = - (drm_via_private_t *) cur_seq->dev->dev_private; - uint32_t a_fire, bcmd, dw_count; - int ret = 0; - int have_fire; - const uint32_t *buf = *buffer; - - while (buf < buf_end) { - have_fire = 0; - if ((buf_end - buf) < 2) { - DRM_ERROR - ("Unexpected termination of primitive list.\n"); - ret = 1; - break; - } - if ((*buf & HC_ACMD_MASK) != HC_ACMD_HCmdB) - break; - bcmd = *buf++; - if ((*buf & HC_ACMD_MASK) != HC_ACMD_HCmdA) { - DRM_ERROR("Expected Vertex List A command, got 0x%x\n", - *buf); - ret = 1; - break; - } - a_fire = - *buf++ | HC_HPLEND_MASK | HC_HPMValidN_MASK | - HC_HE3Fire_MASK; - - /* - * How many dwords per vertex ? - */ - - if (cur_seq->agp && ((bcmd & (0xF << 11)) == 0)) { - DRM_ERROR("Illegal B command vertex data for AGP.\n"); - ret = 1; - break; - } - - dw_count = 0; - if (bcmd & (1 << 7)) - dw_count += (cur_seq->multitex) ? 2 : 1; - if (bcmd & (1 << 8)) - dw_count += (cur_seq->multitex) ? 2 : 1; - if (bcmd & (1 << 9)) - dw_count++; - if (bcmd & (1 << 10)) - dw_count++; - if (bcmd & (1 << 11)) - dw_count++; - if (bcmd & (1 << 12)) - dw_count++; - if (bcmd & (1 << 13)) - dw_count++; - if (bcmd & (1 << 14)) - dw_count++; - - while (buf < buf_end) { - if (*buf == a_fire) { - if (dev_priv->num_fire_offsets >= - VIA_FIRE_BUF_SIZE) { - DRM_ERROR("Fire offset buffer full.\n"); - ret = 1; - break; - } - dev_priv->fire_offsets[dev_priv-> - num_fire_offsets++] = - buf; - have_fire = 1; - buf++; - if (buf < buf_end && *buf == a_fire) - buf++; - break; - } - if ((*buf == HALCYON_HEADER2) || - ((*buf & HALCYON_FIREMASK) == HALCYON_FIRECMD)) { - DRM_ERROR("Missing Vertex Fire command, " - "Stray Vertex Fire command or verifier " - "lost sync.\n"); - ret = 1; - break; - } - if ((ret = eat_words(&buf, buf_end, dw_count))) - break; - } - if (buf >= buf_end && !have_fire) { - DRM_ERROR("Missing Vertex Fire command or verifier " - "lost sync.\n"); - ret = 1; - break; - } - if (cur_seq->agp && ((buf - cur_seq->buf_start) & 0x01)) { - DRM_ERROR("AGP Primitive list end misaligned.\n"); - ret = 1; - break; - } - } - *buffer = buf; - return ret; -} - -static __inline__ verifier_state_t -via_check_header2(uint32_t const **buffer, const uint32_t *buf_end, - drm_via_state_t *hc_state) -{ - uint32_t cmd; - int hz_mode; - hazard_t hz; - const uint32_t *buf = *buffer; - const hazard_t *hz_table; - - if ((buf_end - buf) < 2) { - DRM_ERROR - ("Illegal termination of DMA HALCYON_HEADER2 sequence.\n"); - return state_error; - } - buf++; - cmd = (*buf++ & 0xFFFF0000) >> 16; - - switch (cmd) { - case HC_ParaType_CmdVdata: - if (via_check_prim_list(&buf, buf_end, hc_state)) - return state_error; - *buffer = buf; - return state_command; - case HC_ParaType_NotTex: - hz_table = table1; - break; - case HC_ParaType_Tex: - hc_state->texture = 0; - hz_table = table2; - break; - case (HC_ParaType_Tex | (HC_SubType_Tex1 << 8)): - hc_state->texture = 1; - hz_table = table2; - break; - case (HC_ParaType_Tex | (HC_SubType_TexGeneral << 8)): - hz_table = table3; - break; - case HC_ParaType_Auto: - if (eat_words(&buf, buf_end, 2)) - return state_error; - *buffer = buf; - return state_command; - case (HC_ParaType_Palette | (HC_SubType_Stipple << 8)): - if (eat_words(&buf, buf_end, 32)) - return state_error; - *buffer = buf; - return state_command; - case (HC_ParaType_Palette | (HC_SubType_TexPalette0 << 8)): - case (HC_ParaType_Palette | (HC_SubType_TexPalette1 << 8)): - DRM_ERROR("Texture palettes are rejected because of " - "lack of info how to determine their size.\n"); - return state_error; - case (HC_ParaType_Palette | (HC_SubType_FogTable << 8)): - DRM_ERROR("Fog factor palettes are rejected because of " - "lack of info how to determine their size.\n"); - return state_error; - default: - - /* - * There are some unimplemented HC_ParaTypes here, that - * need to be implemented if the Mesa driver is extended. - */ - - DRM_ERROR("Invalid or unimplemented HALCYON_HEADER2 " - "DMA subcommand: 0x%x. Previous dword: 0x%x\n", - cmd, *(buf - 2)); - *buffer = buf; - return state_error; - } - - while (buf < buf_end) { - cmd = *buf++; - if ((hz = hz_table[cmd >> 24])) { - if ((hz_mode = investigate_hazard(cmd, hz, hc_state))) { - if (hz_mode == 1) { - buf--; - break; - } - return state_error; - } - } else if (hc_state->unfinished && - finish_current_sequence(hc_state)) { - return state_error; - } - } - if (hc_state->unfinished && finish_current_sequence(hc_state)) - return state_error; - *buffer = buf; - return state_command; -} - -static __inline__ verifier_state_t -via_parse_header2(drm_via_private_t *dev_priv, uint32_t const **buffer, - const uint32_t *buf_end, int *fire_count) -{ - uint32_t cmd; - const uint32_t *buf = *buffer; - const uint32_t *next_fire; - int burst = 0; - - next_fire = dev_priv->fire_offsets[*fire_count]; - buf++; - cmd = (*buf & 0xFFFF0000) >> 16; - via_write(dev_priv, HC_REG_TRANS_SET + HC_REG_BASE, *buf++); - switch (cmd) { - case HC_ParaType_CmdVdata: - while ((buf < buf_end) && - (*fire_count < dev_priv->num_fire_offsets) && - (*buf & HC_ACMD_MASK) == HC_ACMD_HCmdB) { - while (buf <= next_fire) { - via_write(dev_priv, HC_REG_TRANS_SPACE + HC_REG_BASE + - (burst & 63), *buf++); - burst += 4; - } - if ((buf < buf_end) - && ((*buf & HALCYON_FIREMASK) == HALCYON_FIRECMD)) - buf++; - - if (++(*fire_count) < dev_priv->num_fire_offsets) - next_fire = dev_priv->fire_offsets[*fire_count]; - } - break; - default: - while (buf < buf_end) { - - if (*buf == HC_HEADER2 || - (*buf & HALCYON_HEADER1MASK) == HALCYON_HEADER1 || - (*buf & VIA_VIDEOMASK) == VIA_VIDEO_HEADER5 || - (*buf & VIA_VIDEOMASK) == VIA_VIDEO_HEADER6) - break; - - via_write(dev_priv, HC_REG_TRANS_SPACE + HC_REG_BASE + - (burst & 63), *buf++); - burst += 4; - } - } - *buffer = buf; - return state_command; -} - -static __inline__ int verify_mmio_address(uint32_t address) -{ - if ((address > 0x3FF) && (address < 0xC00)) { - DRM_ERROR("Invalid VIDEO DMA command. " - "Attempt to access 3D- or command burst area.\n"); - return 1; - } else if ((address > 0xCFF) && (address < 0x1300)) { - DRM_ERROR("Invalid VIDEO DMA command. " - "Attempt to access PCI DMA area.\n"); - return 1; - } else if (address > 0x13FF) { - DRM_ERROR("Invalid VIDEO DMA command. " - "Attempt to access VGA registers.\n"); - return 1; - } - return 0; -} - -static __inline__ int -verify_video_tail(uint32_t const **buffer, const uint32_t * buf_end, - uint32_t dwords) -{ - const uint32_t *buf = *buffer; - - if (buf_end - buf < dwords) { - DRM_ERROR("Illegal termination of video command.\n"); - return 1; - } - while (dwords--) { - if (*buf++) { - DRM_ERROR("Illegal video command tail.\n"); - return 1; - } - } - *buffer = buf; - return 0; -} - -static __inline__ verifier_state_t -via_check_header1(uint32_t const **buffer, const uint32_t * buf_end) -{ - uint32_t cmd; - const uint32_t *buf = *buffer; - verifier_state_t ret = state_command; - - while (buf < buf_end) { - cmd = *buf; - if ((cmd > ((0x3FF >> 2) | HALCYON_HEADER1)) && - (cmd < ((0xC00 >> 2) | HALCYON_HEADER1))) { - if ((cmd & HALCYON_HEADER1MASK) != HALCYON_HEADER1) - break; - DRM_ERROR("Invalid HALCYON_HEADER1 command. " - "Attempt to access 3D- or command burst area.\n"); - ret = state_error; - break; - } else if (cmd > ((0xCFF >> 2) | HALCYON_HEADER1)) { - if ((cmd & HALCYON_HEADER1MASK) != HALCYON_HEADER1) - break; - DRM_ERROR("Invalid HALCYON_HEADER1 command. " - "Attempt to access VGA registers.\n"); - ret = state_error; - break; - } else { - buf += 2; - } - } - *buffer = buf; - return ret; -} - -static __inline__ verifier_state_t -via_parse_header1(drm_via_private_t *dev_priv, uint32_t const **buffer, - const uint32_t *buf_end) -{ - register uint32_t cmd; - const uint32_t *buf = *buffer; - - while (buf < buf_end) { - cmd = *buf; - if ((cmd & HALCYON_HEADER1MASK) != HALCYON_HEADER1) - break; - via_write(dev_priv, (cmd & ~HALCYON_HEADER1MASK) << 2, *++buf); - buf++; - } - *buffer = buf; - return state_command; -} - -static __inline__ verifier_state_t -via_check_vheader5(uint32_t const **buffer, const uint32_t *buf_end) -{ - uint32_t data; - const uint32_t *buf = *buffer; - - if (buf_end - buf < 4) { - DRM_ERROR("Illegal termination of video header5 command\n"); - return state_error; - } - - data = *buf++ & ~VIA_VIDEOMASK; - if (verify_mmio_address(data)) - return state_error; - - data = *buf++; - if (*buf++ != 0x00F50000) { - DRM_ERROR("Illegal header5 header data\n"); - return state_error; - } - if (*buf++ != 0x00000000) { - DRM_ERROR("Illegal header5 header data\n"); - return state_error; - } - if (eat_words(&buf, buf_end, data)) - return state_error; - if ((data & 3) && verify_video_tail(&buf, buf_end, 4 - (data & 3))) - return state_error; - *buffer = buf; - return state_command; - -} - -static __inline__ verifier_state_t -via_parse_vheader5(drm_via_private_t *dev_priv, uint32_t const **buffer, - const uint32_t *buf_end) -{ - uint32_t addr, count, i; - const uint32_t *buf = *buffer; - - addr = *buf++ & ~VIA_VIDEOMASK; - i = count = *buf; - buf += 3; - while (i--) - via_write(dev_priv, addr, *buf++); - if (count & 3) - buf += 4 - (count & 3); - *buffer = buf; - return state_command; -} - -static __inline__ verifier_state_t -via_check_vheader6(uint32_t const **buffer, const uint32_t * buf_end) -{ - uint32_t data; - const uint32_t *buf = *buffer; - uint32_t i; - - if (buf_end - buf < 4) { - DRM_ERROR("Illegal termination of video header6 command\n"); - return state_error; - } - buf++; - data = *buf++; - if (*buf++ != 0x00F60000) { - DRM_ERROR("Illegal header6 header data\n"); - return state_error; - } - if (*buf++ != 0x00000000) { - DRM_ERROR("Illegal header6 header data\n"); - return state_error; - } - if ((buf_end - buf) < (data << 1)) { - DRM_ERROR("Illegal termination of video header6 command\n"); - return state_error; - } - for (i = 0; i < data; ++i) { - if (verify_mmio_address(*buf++)) - return state_error; - buf++; - } - data <<= 1; - if ((data & 3) && verify_video_tail(&buf, buf_end, 4 - (data & 3))) - return state_error; - *buffer = buf; - return state_command; -} - -static __inline__ verifier_state_t -via_parse_vheader6(drm_via_private_t *dev_priv, uint32_t const **buffer, - const uint32_t *buf_end) -{ - - uint32_t addr, count, i; - const uint32_t *buf = *buffer; - - i = count = *++buf; - buf += 3; - while (i--) { - addr = *buf++; - via_write(dev_priv, addr, *buf++); - } - count <<= 1; - if (count & 3) - buf += 4 - (count & 3); - *buffer = buf; - return state_command; -} - -int -via_verify_command_stream(const uint32_t * buf, unsigned int size, - struct drm_device * dev, int agp) -{ - - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - drm_via_state_t *hc_state = &dev_priv->hc_state; - drm_via_state_t saved_state = *hc_state; - uint32_t cmd; - const uint32_t *buf_end = buf + (size >> 2); - verifier_state_t state = state_command; - int cme_video; - int supported_3d; - - cme_video = (dev_priv->chipset == VIA_PRO_GROUP_A || - dev_priv->chipset == VIA_DX9_0); - - supported_3d = dev_priv->chipset != VIA_DX9_0; - - hc_state->dev = dev; - hc_state->unfinished = no_sequence; - hc_state->map_cache = NULL; - hc_state->agp = agp; - hc_state->buf_start = buf; - dev_priv->num_fire_offsets = 0; - - while (buf < buf_end) { - - switch (state) { - case state_header2: - state = via_check_header2(&buf, buf_end, hc_state); - break; - case state_header1: - state = via_check_header1(&buf, buf_end); - break; - case state_vheader5: - state = via_check_vheader5(&buf, buf_end); - break; - case state_vheader6: - state = via_check_vheader6(&buf, buf_end); - break; - case state_command: - cmd = *buf; - if ((cmd == HALCYON_HEADER2) && supported_3d) - state = state_header2; - else if ((cmd & HALCYON_HEADER1MASK) == HALCYON_HEADER1) - state = state_header1; - else if (cme_video - && (cmd & VIA_VIDEOMASK) == VIA_VIDEO_HEADER5) - state = state_vheader5; - else if (cme_video - && (cmd & VIA_VIDEOMASK) == VIA_VIDEO_HEADER6) - state = state_vheader6; - else if ((cmd == HALCYON_HEADER2) && !supported_3d) { - DRM_ERROR("Accelerated 3D is not supported on this chipset yet.\n"); - state = state_error; - } else { - DRM_ERROR - ("Invalid / Unimplemented DMA HEADER command. 0x%x\n", - cmd); - state = state_error; - } - break; - case state_error: - default: - *hc_state = saved_state; - return -EINVAL; - } - } - if (state == state_error) { - *hc_state = saved_state; - return -EINVAL; - } - return 0; -} - -int -via_parse_command_stream(struct drm_device *dev, const uint32_t *buf, - unsigned int size) -{ - - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - uint32_t cmd; - const uint32_t *buf_end = buf + (size >> 2); - verifier_state_t state = state_command; - int fire_count = 0; - - while (buf < buf_end) { - - switch (state) { - case state_header2: - state = - via_parse_header2(dev_priv, &buf, buf_end, - &fire_count); - break; - case state_header1: - state = via_parse_header1(dev_priv, &buf, buf_end); - break; - case state_vheader5: - state = via_parse_vheader5(dev_priv, &buf, buf_end); - break; - case state_vheader6: - state = via_parse_vheader6(dev_priv, &buf, buf_end); - break; - case state_command: - cmd = *buf; - if (cmd == HALCYON_HEADER2) - state = state_header2; - else if ((cmd & HALCYON_HEADER1MASK) == HALCYON_HEADER1) - state = state_header1; - else if ((cmd & VIA_VIDEOMASK) == VIA_VIDEO_HEADER5) - state = state_vheader5; - else if ((cmd & VIA_VIDEOMASK) == VIA_VIDEO_HEADER6) - state = state_vheader6; - else { - DRM_ERROR - ("Invalid / Unimplemented DMA HEADER command. 0x%x\n", - cmd); - state = state_error; - } - break; - case state_error: - default: - return -EINVAL; - } - } - if (state == state_error) - return -EINVAL; - return 0; -} - -static void -setup_hazard_table(hz_init_t init_table[], hazard_t table[], int size) -{ - int i; - - for (i = 0; i < 256; ++i) - table[i] = forbidden_command; - - for (i = 0; i < size; ++i) - table[init_table[i].code] = init_table[i].hz; -} - -void via_init_command_verifier(void) -{ - setup_hazard_table(init_table1, table1, ARRAY_SIZE(init_table1)); - setup_hazard_table(init_table2, table2, ARRAY_SIZE(init_table2)); - setup_hazard_table(init_table3, table3, ARRAY_SIZE(init_table3)); -} diff --git a/drivers/gpu/drm/via/via_verifier.h b/drivers/gpu/drm/via/via_verifier.h deleted file mode 100644 index 26b6d361ab95..000000000000 --- a/drivers/gpu/drm/via/via_verifier.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright 2004 The Unichrome Project. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE UNICHROME PROJECT, AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Author: Thomas Hellström 2004. - */ - -#ifndef _VIA_VERIFIER_H_ -#define _VIA_VERIFIER_H_ - -typedef enum { - no_sequence = 0, - z_address, - dest_address, - tex_address -} drm_via_sequence_t; - -typedef struct { - unsigned texture; - uint32_t z_addr; - uint32_t d_addr; - uint32_t t_addr[2][10]; - uint32_t pitch[2][10]; - uint32_t height[2][10]; - uint32_t tex_level_lo[2]; - uint32_t tex_level_hi[2]; - uint32_t tex_palette_size[2]; - uint32_t tex_npot[2]; - drm_via_sequence_t unfinished; - int agp_texture; - int multitex; - struct drm_device *dev; - drm_local_map_t *map_cache; - uint32_t vertex_count; - int agp; - const uint32_t *buf_start; -} drm_via_state_t; - -extern int via_verify_command_stream(const uint32_t *buf, unsigned int size, - struct drm_device *dev, int agp); -extern int via_parse_command_stream(struct drm_device *dev, const uint32_t *buf, - unsigned int size); - -#endif diff --git a/drivers/gpu/drm/via/via_video.c b/drivers/gpu/drm/via/via_video.c deleted file mode 100644 index 53b1f58f99b4..000000000000 --- a/drivers/gpu/drm/via/via_video.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright 2005 Thomas Hellstrom. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE AUTHOR(S), AND/OR THE COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - * - * Author: Thomas Hellstrom 2005. - * - * Video and XvMC related functions. - */ - -#include <drm/drm_device.h> -#include <drm/via_drm.h> - -#include "via_drv.h" - -void via_init_futex(drm_via_private_t *dev_priv) -{ - unsigned int i; - - DRM_DEBUG("\n"); - - for (i = 0; i < VIA_NR_XVMC_LOCKS; ++i) { - init_waitqueue_head(&(dev_priv->decoder_queue[i])); - XVMCLOCKPTR(dev_priv->sarea_priv, i)->lock = 0; - } -} - -void via_cleanup_futex(drm_via_private_t *dev_priv) -{ -} - -void via_release_futex(drm_via_private_t *dev_priv, int context) -{ - unsigned int i; - volatile int *lock; - - if (!dev_priv->sarea_priv) - return; - - for (i = 0; i < VIA_NR_XVMC_LOCKS; ++i) { - lock = (volatile int *)XVMCLOCKPTR(dev_priv->sarea_priv, i); - if ((_DRM_LOCKING_CONTEXT(*lock) == context)) { - if (_DRM_LOCK_IS_HELD(*lock) - && (*lock & _DRM_LOCK_CONT)) { - wake_up(&(dev_priv->decoder_queue[i])); - } - *lock = 0; - } - } -} - -int via_decoder_futex(struct drm_device *dev, void *data, struct drm_file *file_priv) -{ - drm_via_futex_t *fx = data; - volatile int *lock; - drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; - drm_via_sarea_t *sAPriv = dev_priv->sarea_priv; - int ret = 0; - - DRM_DEBUG("\n"); - - if (fx->lock >= VIA_NR_XVMC_LOCKS) - return -EFAULT; - - lock = (volatile int *)XVMCLOCKPTR(sAPriv, fx->lock); - - switch (fx->func) { - case VIA_FUTEX_WAIT: - VIA_WAIT_ON(ret, dev_priv->decoder_queue[fx->lock], - (fx->ms / 10) * (HZ / 100), *lock != fx->val); - return ret; - case VIA_FUTEX_WAKE: - wake_up(&(dev_priv->decoder_queue[fx->lock])); - return 0; - } - return 0; -} -- 2.36.1 [-- Attachment #1.1.3: 0002-drm-via-Add-new-module-entry-points.patch --] [-- Type: text/x-patch, Size: 7376 bytes --] From 46d85121c38ad906038bf4303ae40a331a16b11d Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann <tzimmermann@suse.de> Date: Tue, 28 Jun 2022 13:01:03 +0200 Subject: [PATCH 2/2] drm/via: Add new module entry points Add module netry points that allow for both, modern and legacy, modesetting. Make the legacy userspace modesetting configurable via config and module options. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> --- drivers/gpu/drm/Kconfig | 9 ++----- drivers/gpu/drm/via/Kconfig | 17 ++++++++++++++ drivers/gpu/drm/via/Makefile | 5 ++-- drivers/gpu/drm/via/via_drv.c | 40 ++++++++++++++++++++++++++++++++ drivers/gpu/drm/via/via_drv.h | 16 +++++++++++++ drivers/gpu/drm/via/via_legacy.c | 39 ++++++++++--------------------- drivers/gpu/drm/via/via_legacy.h | 21 +++++++++++++++++ 7 files changed, 111 insertions(+), 36 deletions(-) create mode 100644 drivers/gpu/drm/via/Kconfig create mode 100644 drivers/gpu/drm/via/via_drv.c create mode 100644 drivers/gpu/drm/via/via_drv.h create mode 100644 drivers/gpu/drm/via/via_legacy.h diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 22e7fa48d693..8ea87d355434 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -387,6 +387,8 @@ source "drivers/gpu/drm/solomon/Kconfig" source "drivers/gpu/drm/sprd/Kconfig" +source "drivers/gpu/drm/via/Kconfig" + config DRM_HYPERV tristate "DRM Support for Hyper-V synthetic video device" depends on DRM && PCI && MMU && HYPERV @@ -462,13 +464,6 @@ config DRM_SIS chipset. If M is selected the module will be called sis. AGP support is required for this driver to work. -config DRM_VIA - tristate "Via unichrome video cards" - depends on DRM && PCI - help - Choose this option if you have a Via unichrome or compatible video - chipset. If M is selected the module will be called via. - config DRM_SAVAGE tristate "Savage video cards" depends on DRM && PCI diff --git a/drivers/gpu/drm/via/Kconfig b/drivers/gpu/drm/via/Kconfig new file mode 100644 index 000000000000..b4e3c2405ae3 --- /dev/null +++ b/drivers/gpu/drm/via/Kconfig @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: MIT + +config DRM_VIA + tristate "Via UniChrome" + depends on DRM && PCI + help + Choose this option if you have a Via UniChrome or compatible video + chipset. + +config DRM_VIA_UMS_DEFAULT + bool "Enable userspace modesetting by default (DANGEROUS)" + depends on DRM_VIA && DRM_LEGACY + help + Select this option to enable userspace modesetting by default. + This feature is obsolete and dangerous. + + Select N unless you know what you're doing. diff --git a/drivers/gpu/drm/via/Makefile b/drivers/gpu/drm/via/Makefile index 997620aa14f2..08a7e92542ef 100644 --- a/drivers/gpu/drm/via/Makefile +++ b/drivers/gpu/drm/via/Makefile @@ -3,6 +3,7 @@ # Makefile for the drm device driver. This driver provides support for the # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. -via-y := via_legacy.o +via-y := via_drv.o +via-$(CONFIG_DRM_LEGACY) += via_legacy.o -obj-$(CONFIG_DRM_VIA) +=via.o +obj-$(CONFIG_DRM_VIA) += via.o diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c new file mode 100644 index 000000000000..e6c586ef90f4 --- /dev/null +++ b/drivers/gpu/drm/via/via_drv.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: MIT + +#include <linux/module.h> +#include <linux/pci_ids.h> + +#include "via_drv.h" +#include "via_legacy.h" + +#if defined(CONFIG_DRM_VIA_UMS_DEFAULT) +static bool enable_ums = true; +#else +static bool enable_ums; +#endif +MODULE_PARM_DESC(enable_ums, "Enable userspace modesetting (OBSOLETE)"); +module_param(enable_ums, bool, 0); + +static int __init via_init(void) +{ + if (enable_ums) + return via_legacy_init(); + + return -ENODEV; /* TODO: drm_pci_register_driver() */ +} + +static void __exit via_exit(void) +{ + if (enable_ums) { + via_legacy_exit(); + return; + } + + /* TODO: pci_unregister_driver() */ +} + +module_init(via_init); +module_exit(via_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL and additional rights"); diff --git a/drivers/gpu/drm/via/via_drv.h b/drivers/gpu/drm/via/via_drv.h new file mode 100644 index 000000000000..c69f8c187efa --- /dev/null +++ b/drivers/gpu/drm/via/via_drv.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: MIT */ + +#ifndef VIA_DRV_H +#define VIA_DRV_H + +#define DRIVER_AUTHOR "Various" + +#define DRIVER_NAME "via" +#define DRIVER_DESC "VIA Unichrome / Pro" +#define DRIVER_DATE "20070202" + +#define DRIVER_MAJOR 2 +#define DRIVER_MINOR 11 +#define DRIVER_PATCHLEVEL 1 + +#endif diff --git a/drivers/gpu/drm/via/via_legacy.c b/drivers/gpu/drm/via/via_legacy.c index a900302947aa..bb727b2792e3 100644 --- a/drivers/gpu/drm/via/via_legacy.c +++ b/drivers/gpu/drm/via/via_legacy.c @@ -46,6 +46,8 @@ #include <drm/via_drm.h> #include "via_3d_reg.h" +#include "via_drv.h" +#include "via_legacy.h" /* * Legacy file: via_verifier.h @@ -209,16 +211,6 @@ typedef struct _drm_via_blitq { * Copyright 2001-2003 S3 Graphics, Inc. All Rights Reserved. */ -#define DRIVER_AUTHOR "Various" - -#define DRIVER_NAME "via" -#define DRIVER_DESC "VIA Unichrome / Pro" -#define DRIVER_DATE "20070202" - -#define DRIVER_MAJOR 2 -#define DRIVER_MINOR 11 -#define DRIVER_PATCHLEVEL 1 - #define VIA_PCI_BUF_SIZE 60000 #define VIA_FIRE_BUF_SIZE 1024 #define VIA_NUM_IRQS 4 @@ -1921,10 +1913,6 @@ static void via_driver_postclose(struct drm_device *dev, struct drm_file *file) kfree(file_priv); } -static struct pci_device_id pciidlist[] = { - viadrv_PCI_IDS -}; - static const struct file_operations via_driver_fops = { .owner = THIS_MODULE, .open = drm_open, @@ -1964,30 +1952,27 @@ static struct drm_driver driver = { .patchlevel = DRIVER_PATCHLEVEL, }; -static struct pci_driver via_pci_driver = { +static const struct pci_device_id via_legacy_pci_driver_id_table[] = { + viadrv_PCI_IDS +}; + +static struct pci_driver via_legacy_pci_driver = { .name = DRIVER_NAME, - .id_table = pciidlist, + .id_table = via_legacy_pci_driver_id_table, }; -static int __init via_init(void) +int __init via_legacy_init(void) { driver.num_ioctls = via_max_ioctl; via_init_command_verifier(); - return drm_legacy_pci_init(&driver, &via_pci_driver); + return drm_legacy_pci_init(&driver, &via_legacy_pci_driver); } -static void __exit via_exit(void) +void __exit via_legacy_exit(void) { - drm_legacy_pci_exit(&driver, &via_pci_driver); + drm_legacy_pci_exit(&driver, &via_legacy_pci_driver); } -module_init(via_init); -module_exit(via_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL and additional rights"); - /* * Legacy file: via_irq.c * diff --git a/drivers/gpu/drm/via/via_legacy.h b/drivers/gpu/drm/via/via_legacy.h new file mode 100644 index 000000000000..27d8a5d797b3 --- /dev/null +++ b/drivers/gpu/drm/via/via_legacy.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: MIT */ + +#ifndef VIA_LEGACY_H +#define VIA_LEGACY_H + +#include <linux/errno.h> +#include <linux/init.h> + +#if defined(CONFIG_DRM_LEGACY) +int via_legacy_init(void); +void via_legacy_exit(void); +#else +static inline int __init via_legacy_init(void) +{ + return -ENODEV; +} +static inline void __exit via_legacy_exit(void) +{ } +#endif + +#endif -- 2.36.1 [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 840 bytes --] ^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [PATCH 00/28] OpenChrome DRM for Linux 5.20 2022-06-28 12:21 ` Thomas Zimmermann @ 2022-06-30 8:07 ` Javier Martinez Canillas 2022-06-30 8:19 ` Thomas Zimmermann 0 siblings, 1 reply; 34+ messages in thread From: Javier Martinez Canillas @ 2022-06-30 8:07 UTC (permalink / raw) To: Thomas Zimmermann, Sam Ravnborg; +Cc: Kevin Brace, dri-devel, Kevin Brace Hello, On 6/28/22 14:21, Thomas Zimmermann wrote: > Hi > > Am 27.06.22 um 23:32 schrieb Sam Ravnborg: >> Hi Kevin/Thomas, >> >>> >>> I had a brief look over the patches. Even though the code looks fairly rough >>> in places, I think we should get this driver merged ASAP. >> >> Agreed, we have a had a few cases where we dragged out committing much >> too long time. >> >> Timing wise, it would be good if we can already hit drm-misc-next right >> _after_ the pull -so we have a full cycle to fix anything before it hits >> mainline. >> >>> For the old via driver, I think we need a better apprach. IMHO it would be >>> preferable to put the new driver into via/ but keep the old driver there as >>> well. A build option would control which is being used. >> >> I assume the user base for via drivers are very small and they have the >> fbdev driver already. >> So I support replacing the current via drm driver as Kevin tries to do. > > I don't know if there are still users of the old userspace, but if so I > would consider this removal a regression. I think the old code supports > 3d and video decoding. Depending on the feature set, 3d support might > not be useful any longer, but video decoding probably is. (I might be > wrong about all this.) IMHO we should not simply remove this at least > until we can verify that it's no longer useful to anyone. > I strongly agree with Thomas on this. > However, legacy support is trivial. Kevin, please see the attached files > for two cleanup patches. You're welcome to add them to the start of your > patchset to get the legacy code out of the way. > I'm not sure about this approach, I think that having completely separated drivers would be better to maintain in the long run since it's likely that the legacy VIA driver will only get bug fixes (if any) and could be removed once the new modsetting driver has feature parity, the legacy can be dropped. Maybe an alternative could be to add a drivers/gpu/drm/legacy directory and move all the legacy DRM drivers there ? And the Kconfig symbol could be i.e: CONFIG_DRM_LEGACY_VIA and same for the others legacy DRM drivers. And the directory could only be sourced from Kconfig when CONFIG_DRM_LEGACY is enabled and make it default to n. If in a few of releases nobody complains then the whole directory could be removed. -- Best regards, Javier Martinez Canillas Linux Engineering Red Hat ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 00/28] OpenChrome DRM for Linux 5.20 2022-06-30 8:07 ` Javier Martinez Canillas @ 2022-06-30 8:19 ` Thomas Zimmermann 2022-06-30 8:27 ` Javier Martinez Canillas 2022-06-30 8:33 ` Thomas Zimmermann 0 siblings, 2 replies; 34+ messages in thread From: Thomas Zimmermann @ 2022-06-30 8:19 UTC (permalink / raw) To: Javier Martinez Canillas, Sam Ravnborg Cc: Kevin Brace, dri-devel, Kevin Brace [-- Attachment #1.1: Type: text/plain, Size: 3003 bytes --] Hi Am 30.06.22 um 10:07 schrieb Javier Martinez Canillas: > Hello, > > On 6/28/22 14:21, Thomas Zimmermann wrote: >> Hi >> >> Am 27.06.22 um 23:32 schrieb Sam Ravnborg: >>> Hi Kevin/Thomas, >>> >>>> >>>> I had a brief look over the patches. Even though the code looks fairly rough >>>> in places, I think we should get this driver merged ASAP. >>> >>> Agreed, we have a had a few cases where we dragged out committing much >>> too long time. >>> >>> Timing wise, it would be good if we can already hit drm-misc-next right >>> _after_ the pull -so we have a full cycle to fix anything before it hits >>> mainline. >>> >>>> For the old via driver, I think we need a better apprach. IMHO it would be >>>> preferable to put the new driver into via/ but keep the old driver there as >>>> well. A build option would control which is being used. >>> >>> I assume the user base for via drivers are very small and they have the >>> fbdev driver already. >>> So I support replacing the current via drm driver as Kevin tries to do. >> >> I don't know if there are still users of the old userspace, but if so I >> would consider this removal a regression. I think the old code supports >> 3d and video decoding. Depending on the feature set, 3d support might >> not be useful any longer, but video decoding probably is. (I might be >> wrong about all this.) IMHO we should not simply remove this at least >> until we can verify that it's no longer useful to anyone. >> > > I strongly agree with Thomas on this. > >> However, legacy support is trivial. Kevin, please see the attached files >> for two cleanup patches. You're welcome to add them to the start of your >> patchset to get the legacy code out of the way. >> > > I'm not sure about this approach, I think that having completely separated > drivers would be better to maintain in the long run since it's likely that > the legacy VIA driver will only get bug fixes (if any) and could be removed > once the new modsetting driver has feature parity, the legacy can be dropped. > > Maybe an alternative could be to add a drivers/gpu/drm/legacy directory and > move all the legacy DRM drivers there ? And the Kconfig symbol could be i.e: > CONFIG_DRM_LEGACY_VIA and same for the others legacy DRM drivers. > > And the directory could only be sourced from Kconfig when CONFIG_DRM_LEGACY > is enabled and make it default to n. If in a few of releases nobody complains > then the whole directory could be removed. > That seems a lot of work for simply removing something. And I'm sure that people will only complain after legacy/via got removed. If we want to separate code for the old and new VIA driver, let's put the new code into unichrome/ and be done with it. Best regards Thomas -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Ivo Totev [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 840 bytes --] ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 00/28] OpenChrome DRM for Linux 5.20 2022-06-30 8:19 ` Thomas Zimmermann @ 2022-06-30 8:27 ` Javier Martinez Canillas 2022-06-30 8:33 ` Thomas Zimmermann 1 sibling, 0 replies; 34+ messages in thread From: Javier Martinez Canillas @ 2022-06-30 8:27 UTC (permalink / raw) To: Thomas Zimmermann, Sam Ravnborg; +Cc: Kevin Brace, dri-devel, Kevin Brace Hello Thomas, On 6/30/22 10:19, Thomas Zimmermann wrote: [snip] >> >> And the directory could only be sourced from Kconfig when CONFIG_DRM_LEGACY >> is enabled and make it default to n. If in a few of releases nobody complains >> then the whole directory could be removed. >> > > That seems a lot of work for simply removing something. And I'm sure > that people will only complain after legacy/via got removed. > > If we want to separate code for the old and new VIA driver, let's put > the new code into unichrome/ and be done with it. > I believe that there's value in having all the legacy drivers in a single directory rather than having them scattered all across the subsystem. But don't have a strong opinion either. I just wanted to share my thoughts. > Best regards > Thomas > > -- Best regards, Javier Martinez Canillas Linux Engineering Red Hat ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 00/28] OpenChrome DRM for Linux 5.20 2022-06-30 8:19 ` Thomas Zimmermann 2022-06-30 8:27 ` Javier Martinez Canillas @ 2022-06-30 8:33 ` Thomas Zimmermann 1 sibling, 0 replies; 34+ messages in thread From: Thomas Zimmermann @ 2022-06-30 8:33 UTC (permalink / raw) To: Javier Martinez Canillas, Sam Ravnborg Cc: Kevin Brace, dri-devel, Kevin Brace [-- Attachment #1.1: Type: text/plain, Size: 3542 bytes --] Hi Am 30.06.22 um 10:19 schrieb Thomas Zimmermann: > Hi > > Am 30.06.22 um 10:07 schrieb Javier Martinez Canillas: >> Hello, >> >> On 6/28/22 14:21, Thomas Zimmermann wrote: >>> Hi >>> >>> Am 27.06.22 um 23:32 schrieb Sam Ravnborg: >>>> Hi Kevin/Thomas, >>>> >>>>> >>>>> I had a brief look over the patches. Even though the code looks >>>>> fairly rough >>>>> in places, I think we should get this driver merged ASAP. >>>> >>>> Agreed, we have a had a few cases where we dragged out committing much >>>> too long time. >>>> >>>> Timing wise, it would be good if we can already hit drm-misc-next right >>>> _after_ the pull -so we have a full cycle to fix anything before it >>>> hits >>>> mainline. >>>> >>>>> For the old via driver, I think we need a better apprach. IMHO it >>>>> would be >>>>> preferable to put the new driver into via/ but keep the old driver >>>>> there as >>>>> well. A build option would control which is being used. >>>> >>>> I assume the user base for via drivers are very small and they have the >>>> fbdev driver already. >>>> So I support replacing the current via drm driver as Kevin tries to do. >>> >>> I don't know if there are still users of the old userspace, but if so I >>> would consider this removal a regression. I think the old code supports >>> 3d and video decoding. Depending on the feature set, 3d support might >>> not be useful any longer, but video decoding probably is. (I might be >>> wrong about all this.) IMHO we should not simply remove this at least >>> until we can verify that it's no longer useful to anyone. >>> >> >> I strongly agree with Thomas on this. >>> However, legacy support is trivial. Kevin, please see the attached files >>> for two cleanup patches. You're welcome to add them to the start of your >>> patchset to get the legacy code out of the way. >>> >> >> I'm not sure about this approach, I think that having completely >> separated >> drivers would be better to maintain in the long run since it's likely >> that >> the legacy VIA driver will only get bug fixes (if any) and could be >> removed >> once the new modsetting driver has feature parity, the legacy can be >> dropped. >> Maybe an alternative could be to add a drivers/gpu/drm/legacy >> directory and >> move all the legacy DRM drivers there ? And the Kconfig symbol could >> be i.e: >> CONFIG_DRM_LEGACY_VIA and same for the others legacy DRM drivers. >> >> And the directory could only be sourced from Kconfig when >> CONFIG_DRM_LEGACY >> is enabled and make it default to n. If in a few of releases nobody >> complains >> then the whole directory could be removed. To add another comment here, if we do this then let's please not call it legacy. We also have non-atomic modesetting, non-atomic color mgmt, non-universal planes, etc. All that is also legacy in some way. If we're going to rename and move the old drivers, let's call it consistently CONFIG_DRI1 and dri1/. Best regard Thomas >> > > That seems a lot of work for simply removing something. And I'm sure > that people will only complain after legacy/via got removed. > > If we want to separate code for the old and new VIA driver, let's put > the new code into unichrome/ and be done with it. > > Best regards > Thomas > > -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Ivo Totev [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 840 bytes --] ^ permalink raw reply [flat|nested] 34+ messages in thread
end of thread, other threads:[~2022-06-30 8:34 UTC | newest] Thread overview: 34+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-06-24 20:26 [PATCH 00/28] OpenChrome DRM for Linux 5.20 Kevin Brace 2022-06-24 20:26 ` [PATCH 01/28] drm/via: Add via_3d_reg.h Kevin Brace 2022-06-24 20:26 ` [PATCH 02/28] drm/via: Add via_crtc_hw.h Kevin Brace 2022-06-24 20:26 ` [PATCH 03/28] drm/via: Add via_disp_reg.h Kevin Brace 2022-06-24 20:26 ` [PATCH 04/28] drm/via: Add via_drv.h Kevin Brace 2022-06-25 6:51 ` Sam Ravnborg 2022-06-28 14:33 ` Jani Nikula 2022-06-28 14:32 ` Jani Nikula 2022-06-24 20:26 ` [PATCH 05/28] drm/via: Add via_regs.h Kevin Brace 2022-06-24 20:26 ` [PATCH 06/28] drm/via: Add via_crtc.c Kevin Brace 2022-06-24 20:26 ` [PATCH 07/28] drm/via: Add via_crtc_hw.c Kevin Brace 2022-06-24 20:26 ` [PATCH 08/28] drm/via: Add via_cursor.c Kevin Brace 2022-06-25 6:59 ` Sam Ravnborg 2022-06-24 20:26 ` [PATCH 09/28] drm/via: Add via_dac.c Kevin Brace 2022-06-24 20:26 ` [PATCH 10/28] drm/via: Add via_display.c Kevin Brace 2022-06-24 20:26 ` [PATCH 11/28] drm/via: Add via_drv.c Kevin Brace 2022-06-25 7:15 ` Sam Ravnborg 2022-06-24 20:26 ` [PATCH 12/28] drm/via: Add via_encoder.c Kevin Brace 2022-06-24 20:26 ` [PATCH 13/28] drm/via: Add via_hdmi.c Kevin Brace 2022-06-24 20:26 ` [PATCH 14/28] drm/via: Add via_i2c.c Kevin Brace 2022-06-24 20:26 ` [PATCH 15/28] drm/via: Add via_init.c Kevin Brace 2022-06-24 20:26 ` [PATCH 16/28] drm/via: Add via_ioctl.c Kevin Brace 2022-06-24 20:26 ` [PATCH 17/28] drm/via: Add via_lvds.c Kevin Brace 2022-06-24 20:26 ` [PATCH 18/28] drm/via: Add via_object.c Kevin Brace 2022-06-24 20:26 ` [PATCH 19/28] drm/via: Add via_pll.c Kevin Brace 2022-06-24 21:15 ` [PATCH 00/28] OpenChrome DRM for Linux 5.20 Sam Ravnborg 2022-06-24 23:14 ` Kevin Brace 2022-06-27 7:37 ` Thomas Zimmermann 2022-06-27 21:32 ` Sam Ravnborg 2022-06-28 12:21 ` Thomas Zimmermann 2022-06-30 8:07 ` Javier Martinez Canillas 2022-06-30 8:19 ` Thomas Zimmermann 2022-06-30 8:27 ` Javier Martinez Canillas 2022-06-30 8:33 ` Thomas Zimmermann
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.