* [PATCH] ath10k: add cc_wraparound type for QCA9888 and QCA9884
@ 2016-09-16 11:45 ` akolli
0 siblings, 0 replies; 4+ messages in thread
From: akolli @ 2016-09-16 11:45 UTC (permalink / raw)
To: ath10k; +Cc: akolli, linux-wireless, Anilkumar Kolli
From: Anilkumar Kolli <akolli@qti.qualcomm.com>
During offchannel scan, iw survey dump shows wrong values.
Fix this by assigning cycle counter wranarround type for
QCA9888 and QCA9884, they share same config with QCA4019.
Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 3a8984ba9f74..93168d9f8902 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -191,6 +191,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.name = "qca9984/qca9994 hw1.0",
.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
+ .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
.otp_exe_param = 0x00000700,
.continuous_frag_desc = true,
.cck_rate_map_rev2 = true,
@@ -215,6 +216,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.name = "qca9888 hw2.0",
.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
+ .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
.otp_exe_param = 0x00000700,
.continuous_frag_desc = true,
.channel_counters_freq_hz = 150000,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ath10k: add cc_wraparound type for QCA9888 and QCA9884
@ 2016-09-16 11:45 ` akolli
0 siblings, 0 replies; 4+ messages in thread
From: akolli @ 2016-09-16 11:45 UTC (permalink / raw)
To: ath10k; +Cc: Anilkumar Kolli, akolli, linux-wireless
From: Anilkumar Kolli <akolli@qti.qualcomm.com>
During offchannel scan, iw survey dump shows wrong values.
Fix this by assigning cycle counter wranarround type for
QCA9888 and QCA9884, they share same config with QCA4019.
Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 3a8984ba9f74..93168d9f8902 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -191,6 +191,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.name = "qca9984/qca9994 hw1.0",
.patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
+ .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
.otp_exe_param = 0x00000700,
.continuous_frag_desc = true,
.cck_rate_map_rev2 = true,
@@ -215,6 +216,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.name = "qca9888 hw2.0",
.patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
.uart_pin = 7,
+ .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
.otp_exe_param = 0x00000700,
.continuous_frag_desc = true,
.channel_counters_freq_hz = 150000,
--
1.7.9.5
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: ath10k: add cc_wraparound type for QCA9888 and QCA9884
2016-09-16 11:45 ` akolli
@ 2016-10-04 14:58 ` Kalle Valo
-1 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2016-10-04 14:58 UTC (permalink / raw)
To: akolli; +Cc: ath10k, Anilkumar Kolli, akolli, linux-wireless
akolli@qti.qualcomm.com wrote:
> From: Anilkumar Kolli <akolli@qti.qualcomm.com>
>
> During offchannel scan, iw survey dump shows wrong values.
> Fix this by assigning cycle counter wranarround type for
> QCA9888 and QCA9884, they share same config with QCA4019.
>
> Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
Patch applied to ath-next branch of ath.git, thanks.
bafe492610d5 ath10k: add cc_wraparound type for QCA9888 and QCA9884
--
https://patchwork.kernel.org/patch/9335581/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ath10k: add cc_wraparound type for QCA9888 and QCA9884
@ 2016-10-04 14:58 ` Kalle Valo
0 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2016-10-04 14:58 UTC (permalink / raw)
To: akolli; +Cc: akolli, linux-wireless, ath10k
akolli@qti.qualcomm.com wrote:
> From: Anilkumar Kolli <akolli@qti.qualcomm.com>
>
> During offchannel scan, iw survey dump shows wrong values.
> Fix this by assigning cycle counter wranarround type for
> QCA9888 and QCA9884, they share same config with QCA4019.
>
> Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
Patch applied to ath-next branch of ath.git, thanks.
bafe492610d5 ath10k: add cc_wraparound type for QCA9888 and QCA9884
--
https://patchwork.kernel.org/patch/9335581/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-10-04 14:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-16 11:45 [PATCH] ath10k: add cc_wraparound type for QCA9888 and QCA9884 akolli
2016-09-16 11:45 ` akolli
2016-10-04 14:58 ` Kalle Valo
2016-10-04 14:58 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.