* [NXP-IMX] please pull nxp-imx-2021-4-6
@ 2021-04-06 9:34 Peng Fan
2021-04-06 9:45 ` Stefano Babic
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Peng Fan @ 2021-04-06 9:34 UTC (permalink / raw)
To: u-boot
Hi Stefano,
Please pull nxp-imx-2021-4-6. This PR is based on Tom's master branch. If you need
me rebase on imx/master, I could redo this PR. This is quite a large PR, since lots
stuff in downstream tree.
I ran local buildman test for all boards, no issue found.
------------------------------------------
convert to use binman for i.MX8MN/M/P EVK board
i.MX8M caam/dek support
hab update/fix for i.MX8M/7ULP
env/distro cleanup for i.MX8M
i.MX8M ddr script/driver update
------------------------------------------
Thanks,
Peng.
The following changes since commit 90eba245a66aa20589404ba537215faf2012c1a3:
Merge branch 'next' (2021-04-05 11:29:57 -0400)
are available in the Git repository at:
https://github.com/MrVan/u-boot.git tags/nxp-imx-2021-4-6
for you to fetch changes up to 95dfcc086b419aece6835fd7aaad704de661e246:
doc: imx8mp-evk: update after using binman (2021-04-06 17:19:45 +0800)
----------------------------------------------------------------
Aymen Sghaier (6):
crypto: caam: Add CAAM support to i.MX8M platforms
crypto: caam: Fix build warnings pointer casting
crypto: Add blob command support for i.MX8M platforms
crypto: caam: Fix pointer size to 32bit for i.MX8M
crypto: caam: Add secure memory vid 3 support
crypto: caam: RNG4 TRNG errata
Breno Lima (13):
imx: imx7 Support for Manufacturing Protection
imx: Avoid hardcoded output ring size register offset (ORSR)
imx: Ensure CAAM clock is enabled prior getting out_jr_size
imx: Avoid hardcoded Job Ring Max size
imx: hab: Enable hab.c to authenticate additional images in open configuration
imx: hab: Check if IVT header is HABv4
mx7ulp: hab: Add hab_status command for HABv4 M4 boot
imx: hab: Fix build warnings in 32-bit targets
crypto: fsl: blob: Flush dcache range for destination address
mx6dq: hab: Fix chip version in hab.h code
cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
cmd: blob: Instantiate RNG before running CMD_BLOB
fsl_mfgprot: Fix typo in sign_mppubk()
Clement Faure (2):
imx8m: Add DEK blob encapsulation for imx8m
imx8: Add DEK blob encapsulation
Clement Le Marquis (1):
imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM SCFGR register to 0x3
Franck LENORMAND (3):
crypto: caam: change JR running loop
caam: enable support for iMX7ULP
imx7ulp: Enable support for cmd blob
Jacky Bai (1):
imx8mn: Update the DDR4 timing script on imx8mn ddr4 evk
Peng Fan (21):
tools: imx image: fix write warning
imx8mm/p: remove boot.cmd
imx8mm_evk: add/cleanup variable for distro
imx8mp_evk: add/cleanup variable for distro
imx8mp_evk: spl: clean up including headers
imx8mp_evk: Increase VDD_ARM to 0.95v Overdrive voltage
power: pca9450: add a new parameter for power_pca9450_init
imx8mn_evk: drop duplicated code
imx8mn: Add LPDDR4 EVK board support
imx: logos: use NXP logo
imx8m: soc: update fuse path
arch: mach-imx: imx8m: fix unique_id read error for imx8mp
imx: HAB: Update hab codes to support ARM64 and i.MX8M
imx8m: add regs used by CAAM
imx8mm_evk: switch to use binman to pack images
doc: imx8mm_evk: update doc after using binman
imx8mn-ddr4-evk: switch to use binman
imx8mn-evk: switch to use binman
doc: imx8mn_evk: update doc after using binman
imx8mp-evk: switch to use binman
doc: imx8mp-evk: update after using binman
Sherry Sun (1):
imx8mp: ddr: Add inline ECC feature support
Utkarsh Gupta (2):
imx: HAB: Validate IVT before authenticating image
imx: hab: Display All HAB events via hab_status command
Ye Li (18):
imx8mm_evk: Update to latest LPDDR4 script
imx8mm_evk: Switch to new imx8mm evk board
imx8mp_evk: Update LPDDR4 timing for new FW 202006
imx8mp_evk: Update LPDDR4 refresh time
imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
imx8mn: Add support for 11x11 UltraLite part number
imx8m: Update thermal and PMU kernel nodes for dual/single cores
imx8m: ddr: Disable CA VREF Training for LPDDR4
iMX8MQ: Recognize the B2 revision
misc: ocotp: Update OCOTP driver for iMX8MQ B2
imx8mq_evk: Applying default LPDDR4 script for B2
imx: hab: Add function to authenticate kernel image
hab: Change calling to ROM API failsafe
imx: HAB: Add support for iMX8MM
iMX8M: Add support to enable CONFIG_IMX_HAB
imx: cmd_dek: Enable DEK only for chips supporting CAAM
crypto: caam: Add fsl caam driver
crypto: fsl: refactor for 32 bit version CAAM support on ARM64
haidong.zheng (1):
imx8mp: refine power on imx8mp board
arch/arm/Kconfig | 6 +
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx8mm-evk-u-boot.dtsi | 117 ++++++++-
arch/arm/dts/imx8mm-evk.dtsi | 127 +++++-----
arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 115 +++++++++
arch/arm/dts/imx8mn-evk-u-boot.dtsi | 128 ++++++++++
arch/arm/dts/imx8mn-evk.dts | 128 ++++++++++
arch/arm/dts/imx8mp-evk-u-boot.dtsi | 112 +++++++++
arch/arm/include/asm/arch-imx/cpu.h | 13 +-
arch/arm/include/asm/arch-imx8/image.h | 11 +
arch/arm/include/asm/arch-imx8m/clock.h | 1 +
arch/arm/include/asm/arch-imx8m/imx-regs.h | 21 ++
arch/arm/include/asm/arch-mx7/crm_regs.h | 8 +
arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 12 +
arch/arm/include/asm/mach-imx/hab.h | 37 ++-
arch/arm/include/asm/mach-imx/sys_proto.h | 6 +-
arch/arm/mach-imx/Kconfig | 44 +++-
arch/arm/mach-imx/Makefile | 3 +
arch/arm/mach-imx/cmd_dek.c | 262 ++++++++++++++++++--
arch/arm/mach-imx/cmd_mfgprot.c | 150 ++++++++++++
arch/arm/mach-imx/cpu.c | 8 +-
arch/arm/mach-imx/hab.c | 417 ++++++++++++++++++++++++++++----
arch/arm/mach-imx/imx8/Kconfig | 1 +
arch/arm/mach-imx/imx8m/Kconfig | 11 +
arch/arm/mach-imx/imx8m/clock_imx8mm.c | 8 +
arch/arm/mach-imx/imx8m/clock_imx8mq.c | 7 +
arch/arm/mach-imx/imx8m/soc.c | 183 ++++++++++++--
arch/arm/mach-imx/mx7ulp/Kconfig | 1 +
arch/arm/mach-imx/priblob.c | 33 +++
board/freescale/imx8mm_evk/boot.cmd | 35 ---
board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg | 9 +
board/freescale/imx8mm_evk/lpddr4_timing.c | 692 +++++++++++++++++++++-------------------------------
board/freescale/imx8mm_evk/spl.c | 33 +--
board/freescale/imx8mn_evk/Kconfig | 6 +-
board/freescale/imx8mn_evk/Makefile | 6 +
board/freescale/imx8mn_evk/ddr4_timing.c | 1057 ++++++++++++++++++++++++++++++++++----------------------------------------------
board/freescale/imx8mn_evk/ddr4_timing_ld.c | 1057 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg | 10 +
board/freescale/imx8mn_evk/lpddr4_timing.c | 1587 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/freescale/imx8mn_evk/lpddr4_timing_ld.c | 1440 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/freescale/imx8mn_evk/spl.c | 50 +++-
board/freescale/imx8mp_evk/boot.cmd | 25 --
board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg | 10 +
board/freescale/imx8mp_evk/lpddr4_timing.c | 372 +++++++++++++++++++++-------
board/freescale/imx8mp_evk/spl.c | 38 +--
board/freescale/imx8mq_evk/spl.c | 2 +-
board/phytec/phycore_imx8mp/spl.c | 2 +-
cmd/Kconfig | 8 +
cmd/Makefile | 1 +
cmd/blob.c | 16 ++
cmd/cmd_fsl_caam.c | 88 +++++++
configs/imx8mm_evk_defconfig | 6 +-
configs/imx8mn_ddr4_evk_defconfig | 4 +-
configs/imx8mn_evk_defconfig | 93 +++++++
configs/imx8mp_evk_defconfig | 4 +-
doc/board/freescale/imx8mm_evk.rst | 3 +-
doc/board/freescale/imx8mn_evk.rst | 3 +-
doc/board/freescale/imx8mp_evk.rst | 11 +-
doc/imx/habv4/guides/mx6_mx7_secure_boot.txt | 25 ++
drivers/crypto/Makefile | 1 +
drivers/crypto/fsl/Kconfig | 6 +
drivers/crypto/fsl/Makefile | 4 +-
drivers/crypto/fsl/desc.h | 49 ++--
drivers/crypto/fsl/desc_constr.h | 28 +--
drivers/crypto/fsl/fsl_blob.c | 6 +
drivers/crypto/fsl/fsl_hash.c | 6 +-
drivers/crypto/fsl/fsl_mfgprot.c | 160 ++++++++++++
drivers/crypto/fsl/jobdesc.c | 16 +-
drivers/crypto/fsl/jr.c | 53 ++--
drivers/crypto/fsl/jr.h | 11 +-
drivers/crypto/fsl/type.h | 16 ++
drivers/crypto/fsl_caam.c | 720 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/crypto/fsl_caam_internal.h | 230 ++++++++++++++++++
drivers/ddr/imx/imx8m/Kconfig | 8 +
drivers/misc/mxc_ocotp.c | 2 +-
drivers/power/pmic/pmic_pca9450.c | 4 +-
include/configs/imx8mm_evk.h | 8 +-
include/configs/imx8mp_evk.h | 8 +-
include/fsl_caam.h | 24 ++
include/fsl_sec.h | 54 +++--
include/power/pca9450.h | 2 +-
tools/imx8image.c | 2 +-
tools/imx8mimage.c | 2 +-
tools/logos/freescale.bmp | Bin 46738 -> 47670 bytes
84 files changed, 8600 insertions(+), 1484 deletions(-)
create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mn-evk.dts
create mode 100644 arch/arm/mach-imx/cmd_mfgprot.c
create mode 100644 arch/arm/mach-imx/priblob.c
delete mode 100644 board/freescale/imx8mm_evk/boot.cmd
create mode 100644 board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg
create mode 100644 board/freescale/imx8mn_evk/ddr4_timing_ld.c
create mode 100644 board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg
create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing_ld.c
delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
create mode 100644 board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg
mode change 100644 => 100755 board/freescale/imx8mp_evk/lpddr4_timing.c
create mode 100644 cmd/cmd_fsl_caam.c
create mode 100644 configs/imx8mn_evk_defconfig
create mode 100644 drivers/crypto/fsl/fsl_mfgprot.c
create mode 100644 drivers/crypto/fsl/type.h
create mode 100644 drivers/crypto/fsl_caam.c
create mode 100644 drivers/crypto/fsl_caam_internal.h
create mode 100644 include/fsl_caam.h
^ permalink raw reply [flat|nested] 10+ messages in thread
* [NXP-IMX] please pull nxp-imx-2021-4-6
2021-04-06 9:34 [NXP-IMX] please pull nxp-imx-2021-4-6 Peng Fan
@ 2021-04-06 9:45 ` Stefano Babic
2021-04-08 1:21 ` Peng Fan
2021-04-07 5:27 ` Peng Fan
2021-05-27 14:47 ` Frieder Schrempf
2 siblings, 1 reply; 10+ messages in thread
From: Stefano Babic @ 2021-04-06 9:45 UTC (permalink / raw)
To: u-boot
Hi Peng,
On 06.04.21 11:34, Peng Fan (OSS) wrote:
> Hi Stefano,
>
> Please pull nxp-imx-2021-4-6. This PR is based on Tom's master branch. If you need
> me rebase on imx/master, I could redo this PR. This is quite a large PR, since lots
> stuff in downstream tree.
>
> I ran local buildman test for all boards, no issue found.
> ------------------------------------------
> convert to use binman for i.MX8MN/M/P EVK board
> i.MX8M caam/dek support
> hab update/fix for i.MX8M/7ULP
> env/distro cleanup for i.MX8M
> i.MX8M ddr script/driver update
> ------------------------------------------
>
Can you help me to sync myself with then patches in patchwork ? IMHO you
have two big series, I name them as "update on imx8m" (26 patches) and
"imx: hab/caam new features and update" (37 patches). In PR there should
be something more as the count of patches does not match ;-)
Regards,
Stefano
> Thanks,
> Peng.
>
> The following changes since commit 90eba245a66aa20589404ba537215faf2012c1a3:
>
> Merge branch 'next' (2021-04-05 11:29:57 -0400)
>
> are available in the Git repository at:
>
> https://github.com/MrVan/u-boot.git tags/nxp-imx-2021-4-6
>
> for you to fetch changes up to 95dfcc086b419aece6835fd7aaad704de661e246:
>
> doc: imx8mp-evk: update after using binman (2021-04-06 17:19:45 +0800)
>
> ----------------------------------------------------------------
> Aymen Sghaier (6):
> crypto: caam: Add CAAM support to i.MX8M platforms
> crypto: caam: Fix build warnings pointer casting
> crypto: Add blob command support for i.MX8M platforms
> crypto: caam: Fix pointer size to 32bit for i.MX8M
> crypto: caam: Add secure memory vid 3 support
> crypto: caam: RNG4 TRNG errata
>
> Breno Lima (13):
> imx: imx7 Support for Manufacturing Protection
> imx: Avoid hardcoded output ring size register offset (ORSR)
> imx: Ensure CAAM clock is enabled prior getting out_jr_size
> imx: Avoid hardcoded Job Ring Max size
> imx: hab: Enable hab.c to authenticate additional images in open configuration
> imx: hab: Check if IVT header is HABv4
> mx7ulp: hab: Add hab_status command for HABv4 M4 boot
> imx: hab: Fix build warnings in 32-bit targets
> crypto: fsl: blob: Flush dcache range for destination address
> mx6dq: hab: Fix chip version in hab.h code
> cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
> cmd: blob: Instantiate RNG before running CMD_BLOB
> fsl_mfgprot: Fix typo in sign_mppubk()
>
> Clement Faure (2):
> imx8m: Add DEK blob encapsulation for imx8m
> imx8: Add DEK blob encapsulation
>
> Clement Le Marquis (1):
> imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM SCFGR register to 0x3
>
> Franck LENORMAND (3):
> crypto: caam: change JR running loop
> caam: enable support for iMX7ULP
> imx7ulp: Enable support for cmd blob
>
> Jacky Bai (1):
> imx8mn: Update the DDR4 timing script on imx8mn ddr4 evk
>
> Peng Fan (21):
> tools: imx image: fix write warning
> imx8mm/p: remove boot.cmd
> imx8mm_evk: add/cleanup variable for distro
> imx8mp_evk: add/cleanup variable for distro
> imx8mp_evk: spl: clean up including headers
> imx8mp_evk: Increase VDD_ARM to 0.95v Overdrive voltage
> power: pca9450: add a new parameter for power_pca9450_init
> imx8mn_evk: drop duplicated code
> imx8mn: Add LPDDR4 EVK board support
> imx: logos: use NXP logo
> imx8m: soc: update fuse path
> arch: mach-imx: imx8m: fix unique_id read error for imx8mp
> imx: HAB: Update hab codes to support ARM64 and i.MX8M
> imx8m: add regs used by CAAM
> imx8mm_evk: switch to use binman to pack images
> doc: imx8mm_evk: update doc after using binman
> imx8mn-ddr4-evk: switch to use binman
> imx8mn-evk: switch to use binman
> doc: imx8mn_evk: update doc after using binman
> imx8mp-evk: switch to use binman
> doc: imx8mp-evk: update after using binman
>
> Sherry Sun (1):
> imx8mp: ddr: Add inline ECC feature support
>
> Utkarsh Gupta (2):
> imx: HAB: Validate IVT before authenticating image
> imx: hab: Display All HAB events via hab_status command
>
> Ye Li (18):
> imx8mm_evk: Update to latest LPDDR4 script
> imx8mm_evk: Switch to new imx8mm evk board
> imx8mp_evk: Update LPDDR4 timing for new FW 202006
> imx8mp_evk: Update LPDDR4 refresh time
> imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
> imx8mn: Add support for 11x11 UltraLite part number
> imx8m: Update thermal and PMU kernel nodes for dual/single cores
> imx8m: ddr: Disable CA VREF Training for LPDDR4
> iMX8MQ: Recognize the B2 revision
> misc: ocotp: Update OCOTP driver for iMX8MQ B2
> imx8mq_evk: Applying default LPDDR4 script for B2
> imx: hab: Add function to authenticate kernel image
> hab: Change calling to ROM API failsafe
> imx: HAB: Add support for iMX8MM
> iMX8M: Add support to enable CONFIG_IMX_HAB
> imx: cmd_dek: Enable DEK only for chips supporting CAAM
> crypto: caam: Add fsl caam driver
> crypto: fsl: refactor for 32 bit version CAAM support on ARM64
>
> haidong.zheng (1):
> imx8mp: refine power on imx8mp board
>
> arch/arm/Kconfig | 6 +
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/imx8mm-evk-u-boot.dtsi | 117 ++++++++-
> arch/arm/dts/imx8mm-evk.dtsi | 127 +++++-----
> arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 115 +++++++++
> arch/arm/dts/imx8mn-evk-u-boot.dtsi | 128 ++++++++++
> arch/arm/dts/imx8mn-evk.dts | 128 ++++++++++
> arch/arm/dts/imx8mp-evk-u-boot.dtsi | 112 +++++++++
> arch/arm/include/asm/arch-imx/cpu.h | 13 +-
> arch/arm/include/asm/arch-imx8/image.h | 11 +
> arch/arm/include/asm/arch-imx8m/clock.h | 1 +
> arch/arm/include/asm/arch-imx8m/imx-regs.h | 21 ++
> arch/arm/include/asm/arch-mx7/crm_regs.h | 8 +
> arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 12 +
> arch/arm/include/asm/mach-imx/hab.h | 37 ++-
> arch/arm/include/asm/mach-imx/sys_proto.h | 6 +-
> arch/arm/mach-imx/Kconfig | 44 +++-
> arch/arm/mach-imx/Makefile | 3 +
> arch/arm/mach-imx/cmd_dek.c | 262 ++++++++++++++++++--
> arch/arm/mach-imx/cmd_mfgprot.c | 150 ++++++++++++
> arch/arm/mach-imx/cpu.c | 8 +-
> arch/arm/mach-imx/hab.c | 417 ++++++++++++++++++++++++++++----
> arch/arm/mach-imx/imx8/Kconfig | 1 +
> arch/arm/mach-imx/imx8m/Kconfig | 11 +
> arch/arm/mach-imx/imx8m/clock_imx8mm.c | 8 +
> arch/arm/mach-imx/imx8m/clock_imx8mq.c | 7 +
> arch/arm/mach-imx/imx8m/soc.c | 183 ++++++++++++--
> arch/arm/mach-imx/mx7ulp/Kconfig | 1 +
> arch/arm/mach-imx/priblob.c | 33 +++
> board/freescale/imx8mm_evk/boot.cmd | 35 ---
> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg | 9 +
> board/freescale/imx8mm_evk/lpddr4_timing.c | 692 +++++++++++++++++++++-------------------------------
> board/freescale/imx8mm_evk/spl.c | 33 +--
> board/freescale/imx8mn_evk/Kconfig | 6 +-
> board/freescale/imx8mn_evk/Makefile | 6 +
> board/freescale/imx8mn_evk/ddr4_timing.c | 1057 ++++++++++++++++++++++++++++++++++----------------------------------------------
> board/freescale/imx8mn_evk/ddr4_timing_ld.c | 1057 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg | 10 +
> board/freescale/imx8mn_evk/lpddr4_timing.c | 1587 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mn_evk/lpddr4_timing_ld.c | 1440 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mn_evk/spl.c | 50 +++-
> board/freescale/imx8mp_evk/boot.cmd | 25 --
> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg | 10 +
> board/freescale/imx8mp_evk/lpddr4_timing.c | 372 +++++++++++++++++++++-------
> board/freescale/imx8mp_evk/spl.c | 38 +--
> board/freescale/imx8mq_evk/spl.c | 2 +-
> board/phytec/phycore_imx8mp/spl.c | 2 +-
> cmd/Kconfig | 8 +
> cmd/Makefile | 1 +
> cmd/blob.c | 16 ++
> cmd/cmd_fsl_caam.c | 88 +++++++
> configs/imx8mm_evk_defconfig | 6 +-
> configs/imx8mn_ddr4_evk_defconfig | 4 +-
> configs/imx8mn_evk_defconfig | 93 +++++++
> configs/imx8mp_evk_defconfig | 4 +-
> doc/board/freescale/imx8mm_evk.rst | 3 +-
> doc/board/freescale/imx8mn_evk.rst | 3 +-
> doc/board/freescale/imx8mp_evk.rst | 11 +-
> doc/imx/habv4/guides/mx6_mx7_secure_boot.txt | 25 ++
> drivers/crypto/Makefile | 1 +
> drivers/crypto/fsl/Kconfig | 6 +
> drivers/crypto/fsl/Makefile | 4 +-
> drivers/crypto/fsl/desc.h | 49 ++--
> drivers/crypto/fsl/desc_constr.h | 28 +--
> drivers/crypto/fsl/fsl_blob.c | 6 +
> drivers/crypto/fsl/fsl_hash.c | 6 +-
> drivers/crypto/fsl/fsl_mfgprot.c | 160 ++++++++++++
> drivers/crypto/fsl/jobdesc.c | 16 +-
> drivers/crypto/fsl/jr.c | 53 ++--
> drivers/crypto/fsl/jr.h | 11 +-
> drivers/crypto/fsl/type.h | 16 ++
> drivers/crypto/fsl_caam.c | 720 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/crypto/fsl_caam_internal.h | 230 ++++++++++++++++++
> drivers/ddr/imx/imx8m/Kconfig | 8 +
> drivers/misc/mxc_ocotp.c | 2 +-
> drivers/power/pmic/pmic_pca9450.c | 4 +-
> include/configs/imx8mm_evk.h | 8 +-
> include/configs/imx8mp_evk.h | 8 +-
> include/fsl_caam.h | 24 ++
> include/fsl_sec.h | 54 +++--
> include/power/pca9450.h | 2 +-
> tools/imx8image.c | 2 +-
> tools/imx8mimage.c | 2 +-
> tools/logos/freescale.bmp | Bin 46738 -> 47670 bytes
> 84 files changed, 8600 insertions(+), 1484 deletions(-)
> create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx8mn-evk.dts
> create mode 100644 arch/arm/mach-imx/cmd_mfgprot.c
> create mode 100644 arch/arm/mach-imx/priblob.c
> delete mode 100644 board/freescale/imx8mm_evk/boot.cmd
> create mode 100644 board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg
> create mode 100644 board/freescale/imx8mn_evk/ddr4_timing_ld.c
> create mode 100644 board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg
> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing_ld.c
> delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
> create mode 100644 board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg
> mode change 100644 => 100755 board/freescale/imx8mp_evk/lpddr4_timing.c
> create mode 100644 cmd/cmd_fsl_caam.c
> create mode 100644 configs/imx8mn_evk_defconfig
> create mode 100644 drivers/crypto/fsl/fsl_mfgprot.c
> create mode 100644 drivers/crypto/fsl/type.h
> create mode 100644 drivers/crypto/fsl_caam.c
> create mode 100644 drivers/crypto/fsl_caam_internal.h
> create mode 100644 include/fsl_caam.h
>
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 10+ messages in thread
* [NXP-IMX] please pull nxp-imx-2021-4-6
2021-04-06 9:34 [NXP-IMX] please pull nxp-imx-2021-4-6 Peng Fan
2021-04-06 9:45 ` Stefano Babic
@ 2021-04-07 5:27 ` Peng Fan
2021-05-27 14:47 ` Frieder Schrempf
2 siblings, 0 replies; 10+ messages in thread
From: Peng Fan @ 2021-04-07 5:27 UTC (permalink / raw)
To: u-boot
> Subject: [NXP-IMX] please pull nxp-imx-2021-4-6
Please ignore this PR, I'll resend a v2 PR
Thanks,
Peng.
>
> Hi Stefano,
>
> Please pull nxp-imx-2021-4-6. This PR is based on Tom's master branch. If you
> need me rebase on imx/master, I could redo this PR. This is quite a large PR,
> since lots stuff in downstream tree.
>
> I ran local buildman test for all boards, no issue found.
> ------------------------------------------
> convert to use binman for i.MX8MN/M/P EVK board i.MX8M caam/dek
> support hab update/fix for i.MX8M/7ULP env/distro cleanup for i.MX8M
> i.MX8M ddr script/driver update
> ------------------------------------------
>
> Thanks,
> Peng.
>
> The following changes since commit
> 90eba245a66aa20589404ba537215faf2012c1a3:
>
> Merge branch 'next' (2021-04-05 11:29:57 -0400)
>
> are available in the Git repository at:
>
> https://github.com/MrVan/u-boot.git tags/nxp-imx-2021-4-6
>
> for you to fetch changes up to
> 95dfcc086b419aece6835fd7aaad704de661e246:
>
> doc: imx8mp-evk: update after using binman (2021-04-06 17:19:45 +0800)
>
> ----------------------------------------------------------------
> Aymen Sghaier (6):
> crypto: caam: Add CAAM support to i.MX8M platforms
> crypto: caam: Fix build warnings pointer casting
> crypto: Add blob command support for i.MX8M platforms
> crypto: caam: Fix pointer size to 32bit for i.MX8M
> crypto: caam: Add secure memory vid 3 support
> crypto: caam: RNG4 TRNG errata
>
> Breno Lima (13):
> imx: imx7 Support for Manufacturing Protection
> imx: Avoid hardcoded output ring size register offset (ORSR)
> imx: Ensure CAAM clock is enabled prior getting out_jr_size
> imx: Avoid hardcoded Job Ring Max size
> imx: hab: Enable hab.c to authenticate additional images in open
> configuration
> imx: hab: Check if IVT header is HABv4
> mx7ulp: hab: Add hab_status command for HABv4 M4 boot
> imx: hab: Fix build warnings in 32-bit targets
> crypto: fsl: blob: Flush dcache range for destination address
> mx6dq: hab: Fix chip version in hab.h code
> cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
> cmd: blob: Instantiate RNG before running CMD_BLOB
> fsl_mfgprot: Fix typo in sign_mppubk()
>
> Clement Faure (2):
> imx8m: Add DEK blob encapsulation for imx8m
> imx8: Add DEK blob encapsulation
>
> Clement Le Marquis (1):
> imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM
> SCFGR register to 0x3
>
> Franck LENORMAND (3):
> crypto: caam: change JR running loop
> caam: enable support for iMX7ULP
> imx7ulp: Enable support for cmd blob
>
> Jacky Bai (1):
> imx8mn: Update the DDR4 timing script on imx8mn ddr4 evk
>
> Peng Fan (21):
> tools: imx image: fix write warning
> imx8mm/p: remove boot.cmd
> imx8mm_evk: add/cleanup variable for distro
> imx8mp_evk: add/cleanup variable for distro
> imx8mp_evk: spl: clean up including headers
> imx8mp_evk: Increase VDD_ARM to 0.95v Overdrive voltage
> power: pca9450: add a new parameter for power_pca9450_init
> imx8mn_evk: drop duplicated code
> imx8mn: Add LPDDR4 EVK board support
> imx: logos: use NXP logo
> imx8m: soc: update fuse path
> arch: mach-imx: imx8m: fix unique_id read error for imx8mp
> imx: HAB: Update hab codes to support ARM64 and i.MX8M
> imx8m: add regs used by CAAM
> imx8mm_evk: switch to use binman to pack images
> doc: imx8mm_evk: update doc after using binman
> imx8mn-ddr4-evk: switch to use binman
> imx8mn-evk: switch to use binman
> doc: imx8mn_evk: update doc after using binman
> imx8mp-evk: switch to use binman
> doc: imx8mp-evk: update after using binman
>
> Sherry Sun (1):
> imx8mp: ddr: Add inline ECC feature support
>
> Utkarsh Gupta (2):
> imx: HAB: Validate IVT before authenticating image
> imx: hab: Display All HAB events via hab_status command
>
> Ye Li (18):
> imx8mm_evk: Update to latest LPDDR4 script
> imx8mm_evk: Switch to new imx8mm evk board
> imx8mp_evk: Update LPDDR4 timing for new FW 202006
> imx8mp_evk: Update LPDDR4 refresh time
> imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
> imx8mn: Add support for 11x11 UltraLite part number
> imx8m: Update thermal and PMU kernel nodes for dual/single cores
> imx8m: ddr: Disable CA VREF Training for LPDDR4
> iMX8MQ: Recognize the B2 revision
> misc: ocotp: Update OCOTP driver for iMX8MQ B2
> imx8mq_evk: Applying default LPDDR4 script for B2
> imx: hab: Add function to authenticate kernel image
> hab: Change calling to ROM API failsafe
> imx: HAB: Add support for iMX8MM
> iMX8M: Add support to enable CONFIG_IMX_HAB
> imx: cmd_dek: Enable DEK only for chips supporting CAAM
> crypto: caam: Add fsl caam driver
> crypto: fsl: refactor for 32 bit version CAAM support on ARM64
>
> haidong.zheng (1):
> imx8mp: refine power on imx8mp board
>
> arch/arm/Kconfig | 6 +
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/imx8mm-evk-u-boot.dtsi | 117
> ++++++++-
> arch/arm/dts/imx8mm-evk.dtsi | 127
> +++++-----
> arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 115
> +++++++++
> arch/arm/dts/imx8mn-evk-u-boot.dtsi | 128
> ++++++++++
> arch/arm/dts/imx8mn-evk.dts | 128
> ++++++++++
> arch/arm/dts/imx8mp-evk-u-boot.dtsi | 112
> +++++++++
> arch/arm/include/asm/arch-imx/cpu.h | 13 +-
> arch/arm/include/asm/arch-imx8/image.h | 11 +
> arch/arm/include/asm/arch-imx8m/clock.h | 1 +
> arch/arm/include/asm/arch-imx8m/imx-regs.h | 21 ++
> arch/arm/include/asm/arch-mx7/crm_regs.h | 8 +
> arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 12 +
> arch/arm/include/asm/mach-imx/hab.h | 37 ++-
> arch/arm/include/asm/mach-imx/sys_proto.h | 6 +-
> arch/arm/mach-imx/Kconfig | 44 +++-
> arch/arm/mach-imx/Makefile | 3 +
> arch/arm/mach-imx/cmd_dek.c | 262
> ++++++++++++++++++--
> arch/arm/mach-imx/cmd_mfgprot.c | 150
> ++++++++++++
> arch/arm/mach-imx/cpu.c | 8 +-
> arch/arm/mach-imx/hab.c | 417
> ++++++++++++++++++++++++++++----
> arch/arm/mach-imx/imx8/Kconfig | 1 +
> arch/arm/mach-imx/imx8m/Kconfig | 11 +
> arch/arm/mach-imx/imx8m/clock_imx8mm.c | 8 +
> arch/arm/mach-imx/imx8m/clock_imx8mq.c | 7 +
> arch/arm/mach-imx/imx8m/soc.c | 183
> ++++++++++++--
> arch/arm/mach-imx/mx7ulp/Kconfig | 1 +
> arch/arm/mach-imx/priblob.c | 33 +++
> board/freescale/imx8mm_evk/boot.cmd | 35 ---
> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg | 9 +
> board/freescale/imx8mm_evk/lpddr4_timing.c | 692
> +++++++++++++++++++++-------------------------------
> board/freescale/imx8mm_evk/spl.c | 33 +--
> board/freescale/imx8mn_evk/Kconfig | 6 +-
> board/freescale/imx8mn_evk/Makefile | 6 +
> board/freescale/imx8mn_evk/ddr4_timing.c | 1057
> ++++++++++++++++++++++++++++++++++------------------------------------------
> ----
> board/freescale/imx8mn_evk/ddr4_timing_ld.c | 1057
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++
> board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg | 10 +
> board/freescale/imx8mn_evk/lpddr4_timing.c | 1587
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mn_evk/lpddr4_timing_ld.c | 1440
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mn_evk/spl.c | 50 +++-
> board/freescale/imx8mp_evk/boot.cmd | 25 --
> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg | 10 +
> board/freescale/imx8mp_evk/lpddr4_timing.c | 372
> +++++++++++++++++++++-------
> board/freescale/imx8mp_evk/spl.c | 38 +--
> board/freescale/imx8mq_evk/spl.c | 2 +-
> board/phytec/phycore_imx8mp/spl.c | 2 +-
> cmd/Kconfig | 8 +
> cmd/Makefile | 1 +
> cmd/blob.c | 16 ++
> cmd/cmd_fsl_caam.c | 88
> +++++++
> configs/imx8mm_evk_defconfig | 6 +-
> configs/imx8mn_ddr4_evk_defconfig | 4 +-
> configs/imx8mn_evk_defconfig | 93 +++++++
> configs/imx8mp_evk_defconfig | 4 +-
> doc/board/freescale/imx8mm_evk.rst | 3 +-
> doc/board/freescale/imx8mn_evk.rst | 3 +-
> doc/board/freescale/imx8mp_evk.rst | 11 +-
> doc/imx/habv4/guides/mx6_mx7_secure_boot.txt | 25 ++
> drivers/crypto/Makefile | 1 +
> drivers/crypto/fsl/Kconfig | 6 +
> drivers/crypto/fsl/Makefile | 4 +-
> drivers/crypto/fsl/desc.h | 49 ++--
> drivers/crypto/fsl/desc_constr.h | 28 +--
> drivers/crypto/fsl/fsl_blob.c | 6 +
> drivers/crypto/fsl/fsl_hash.c | 6 +-
> drivers/crypto/fsl/fsl_mfgprot.c | 160
> ++++++++++++
> drivers/crypto/fsl/jobdesc.c | 16 +-
> drivers/crypto/fsl/jr.c | 53 ++--
> drivers/crypto/fsl/jr.h | 11 +-
> drivers/crypto/fsl/type.h | 16 ++
> drivers/crypto/fsl_caam.c | 720
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/crypto/fsl_caam_internal.h | 230
> ++++++++++++++++++
> drivers/ddr/imx/imx8m/Kconfig | 8 +
> drivers/misc/mxc_ocotp.c | 2 +-
> drivers/power/pmic/pmic_pca9450.c | 4 +-
> include/configs/imx8mm_evk.h | 8 +-
> include/configs/imx8mp_evk.h | 8 +-
> include/fsl_caam.h | 24 ++
> include/fsl_sec.h | 54 +++--
> include/power/pca9450.h | 2 +-
> tools/imx8image.c | 2 +-
> tools/imx8mimage.c | 2 +-
> tools/logos/freescale.bmp | Bin 46738 ->
> 47670 bytes
> 84 files changed, 8600 insertions(+), 1484 deletions(-) create mode 100644
> arch/arm/dts/imx8mn-evk-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx8mn-evk.dts create mode 100644
> arch/arm/mach-imx/cmd_mfgprot.c create mode 100644
> arch/arm/mach-imx/priblob.c delete mode 100644
> board/freescale/imx8mm_evk/boot.cmd
> create mode 100644
> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg
> create mode 100644 board/freescale/imx8mn_evk/ddr4_timing_ld.c
> create mode 100644 board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg
> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing_ld.c
> delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
> create mode 100644
> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg
> mode change 100644 => 100755
> board/freescale/imx8mp_evk/lpddr4_timing.c
> create mode 100644 cmd/cmd_fsl_caam.c
> create mode 100644 configs/imx8mn_evk_defconfig create mode 100644
> drivers/crypto/fsl/fsl_mfgprot.c create mode 100644
> drivers/crypto/fsl/type.h create mode 100644 drivers/crypto/fsl_caam.c
> create mode 100644 drivers/crypto/fsl_caam_internal.h
> create mode 100644 include/fsl_caam.h
^ permalink raw reply [flat|nested] 10+ messages in thread
* [NXP-IMX] please pull nxp-imx-2021-4-6
2021-04-06 9:45 ` Stefano Babic
@ 2021-04-08 1:21 ` Peng Fan
0 siblings, 0 replies; 10+ messages in thread
From: Peng Fan @ 2021-04-08 1:21 UTC (permalink / raw)
To: u-boot
Hi Stefano,
On 2021/4/6 17:45, Stefano Babic wrote:
> Hi Peng,
>
> On 06.04.21 11:34, Peng Fan (OSS) wrote:
>> Hi Stefano,
>>
>> Please pull nxp-imx-2021-4-6. This PR is based on Tom's master branch.
>> If you need
>> me rebase on imx/master, I could redo this PR. This is quite a large
>> PR, since lots
>> stuff in downstream tree.
>>
>> I ran local buildman test for all boards, no issue found.
>> ------------------------------------------
>> convert to use binman for i.MX8MN/M/P EVK board
>> i.MX8M caam/dek support
>> hab update/fix for i.MX8M/7ULP
>> env/distro cleanup for i.MX8M
>> i.MX8M ddr script/driver update
>> ------------------------------------------
>>
>
> Can you help me to sync myself with then patches in patchwork ? IMHO you
> have two big series, I name them as "update on imx8m" (26 patches) and
> "imx: hab/caam new features and update" (37 patches). In PR there should
> be something more as the count of patches does not match ;-)
Sorry for this. I have a V2 PR
https://patchwork.ozlabs.org/project/uboot/patch/DB6PR0402MB2760000FC5D80300AA73058E88759 at DB6PR0402MB2760.eurprd04.prod.outlook.com/
The last PR was wrongly did direclty from my local tree.
V2 PR is done from downloading patches on patchwork.
I have updated the patches with awaiting upstream status.
Thanks,
Peng.
>
> Regards,
> Stefano
>
>> Thanks,
>> Peng.
>>
>> The following changes since commit
>> 90eba245a66aa20589404ba537215faf2012c1a3:
>>
>> ?? Merge branch 'next' (2021-04-05 11:29:57 -0400)
>>
>> are available in the Git repository at:
>>
>> ?? https://github.com/MrVan/u-boot.git tags/nxp-imx-2021-4-6
>>
>> for you to fetch changes up to 95dfcc086b419aece6835fd7aaad704de661e246:
>>
>> ?? doc: imx8mp-evk: update after using binman (2021-04-06 17:19:45 +0800)
>>
>> ----------------------------------------------------------------
>> Aymen Sghaier (6):
>> ?????? crypto: caam: Add CAAM support to i.MX8M platforms
>> ?????? crypto: caam: Fix build warnings pointer casting
>> ?????? crypto: Add blob command support for i.MX8M platforms
>> ?????? crypto: caam: Fix pointer size to 32bit for i.MX8M
>> ?????? crypto: caam: Add secure memory vid 3 support
>> ?????? crypto: caam: RNG4 TRNG errata
>>
>> Breno Lima (13):
>> ?????? imx: imx7 Support for Manufacturing Protection
>> ?????? imx: Avoid hardcoded output ring size register offset (ORSR)
>> ?????? imx: Ensure CAAM clock is enabled prior getting out_jr_size
>> ?????? imx: Avoid hardcoded Job Ring Max size
>> ?????? imx: hab: Enable hab.c to authenticate additional images in
>> open configuration
>> ?????? imx: hab: Check if IVT header is HABv4
>> ?????? mx7ulp: hab: Add hab_status command for HABv4 M4 boot
>> ?????? imx: hab: Fix build warnings in 32-bit targets
>> ?????? crypto: fsl: blob: Flush dcache range for destination address
>> ?????? mx6dq: hab: Fix chip version in hab.h code
>> ?????? cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
>> ?????? cmd: blob: Instantiate RNG before running CMD_BLOB
>> ?????? fsl_mfgprot: Fix typo in sign_mppubk()
>>
>> Clement Faure (2):
>> ?????? imx8m: Add DEK blob encapsulation for imx8m
>> ?????? imx8: Add DEK blob encapsulation
>>
>> Clement Le Marquis (1):
>> ?????? imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM
>> SCFGR register to 0x3
>>
>> Franck LENORMAND (3):
>> ?????? crypto: caam: change JR running loop
>> ?????? caam: enable support for iMX7ULP
>> ?????? imx7ulp: Enable support for cmd blob
>>
>> Jacky Bai (1):
>> ?????? imx8mn: Update the DDR4 timing script on imx8mn ddr4 evk
>>
>> Peng Fan (21):
>> ?????? tools: imx image: fix write warning
>> ?????? imx8mm/p: remove boot.cmd
>> ?????? imx8mm_evk: add/cleanup variable for distro
>> ?????? imx8mp_evk: add/cleanup variable for distro
>> ?????? imx8mp_evk: spl: clean up including headers
>> ?????? imx8mp_evk: Increase VDD_ARM to 0.95v Overdrive voltage
>> ?????? power: pca9450: add a new parameter for power_pca9450_init
>> ?????? imx8mn_evk: drop duplicated code
>> ?????? imx8mn: Add LPDDR4 EVK board support
>> ?????? imx: logos: use NXP logo
>> ?????? imx8m: soc: update fuse path
>> ?????? arch: mach-imx: imx8m: fix unique_id read error for imx8mp
>> ?????? imx: HAB: Update hab codes to support ARM64 and i.MX8M
>> ?????? imx8m: add regs used by CAAM
>> ?????? imx8mm_evk: switch to use binman to pack images
>> ?????? doc: imx8mm_evk: update doc after using binman
>> ?????? imx8mn-ddr4-evk: switch to use binman
>> ?????? imx8mn-evk: switch to use binman
>> ?????? doc: imx8mn_evk: update doc after using binman
>> ?????? imx8mp-evk: switch to use binman
>> ?????? doc: imx8mp-evk: update after using binman
>>
>> Sherry Sun (1):
>> ?????? imx8mp: ddr: Add inline ECC feature support
>>
>> Utkarsh Gupta (2):
>> ?????? imx: HAB: Validate IVT before authenticating image
>> ?????? imx: hab: Display All HAB events via hab_status command
>>
>> Ye Li (18):
>> ?????? imx8mm_evk: Update to latest LPDDR4 script
>> ?????? imx8mm_evk: Switch to new imx8mm evk board
>> ?????? imx8mp_evk: Update LPDDR4 timing for new FW 202006
>> ?????? imx8mp_evk: Update LPDDR4 refresh time
>> ?????? imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
>> ?????? imx8mn: Add support for 11x11 UltraLite part number
>> ?????? imx8m: Update thermal and PMU kernel nodes for dual/single cores
>> ?????? imx8m: ddr: Disable CA VREF Training for LPDDR4
>> ?????? iMX8MQ: Recognize the B2 revision
>> ?????? misc: ocotp: Update OCOTP driver for iMX8MQ B2
>> ?????? imx8mq_evk: Applying default LPDDR4 script for B2
>> ?????? imx: hab: Add function to authenticate kernel image
>> ?????? hab: Change calling to ROM API failsafe
>> ?????? imx: HAB: Add support for iMX8MM
>> ?????? iMX8M: Add support to enable CONFIG_IMX_HAB
>> ?????? imx: cmd_dek: Enable DEK only for chips supporting CAAM
>> ?????? crypto: caam: Add fsl caam driver
>> ?????? crypto: fsl: refactor for 32 bit version CAAM support on ARM64
>>
>> haidong.zheng (1):
>> ?????? imx8mp: refine power on imx8mp board
>>
>> ? arch/arm/Kconfig?????????????????????????????????? |??? 6 +
>> ? arch/arm/dts/Makefile????????????????????????????? |??? 1 +
>> ? arch/arm/dts/imx8mm-evk-u-boot.dtsi??????????????? |? 117 ++++++++-
>> ? arch/arm/dts/imx8mm-evk.dtsi?????????????????????? |? 127 +++++-----
>> ? arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi?????????? |? 115 +++++++++
>> ? arch/arm/dts/imx8mn-evk-u-boot.dtsi??????????????? |? 128 ++++++++++
>> ? arch/arm/dts/imx8mn-evk.dts??????????????????????? |? 128 ++++++++++
>> ? arch/arm/dts/imx8mp-evk-u-boot.dtsi??????????????? |? 112 +++++++++
>> ? arch/arm/include/asm/arch-imx/cpu.h??????????????? |?? 13 +-
>> ? arch/arm/include/asm/arch-imx8/image.h???????????? |?? 11 +
>> ? arch/arm/include/asm/arch-imx8m/clock.h??????????? |??? 1 +
>> ? arch/arm/include/asm/arch-imx8m/imx-regs.h???????? |?? 21 ++
>> ? arch/arm/include/asm/arch-mx7/crm_regs.h?????????? |??? 8 +
>> ? arch/arm/include/asm/arch-mx7ulp/imx-regs.h??????? |?? 12 +
>> ? arch/arm/include/asm/mach-imx/hab.h??????????????? |?? 37 ++-
>> ? arch/arm/include/asm/mach-imx/sys_proto.h????????? |??? 6 +-
>> ? arch/arm/mach-imx/Kconfig????????????????????????? |?? 44 +++-
>> ? arch/arm/mach-imx/Makefile???????????????????????? |??? 3 +
>> ? arch/arm/mach-imx/cmd_dek.c??????????????????????? |? 262
>> ++++++++++++++++++--
>> ? arch/arm/mach-imx/cmd_mfgprot.c??????????????????? |? 150 ++++++++++++
>> ? arch/arm/mach-imx/cpu.c??????????????????????????? |??? 8 +-
>> ? arch/arm/mach-imx/hab.c??????????????????????????? |? 417
>> ++++++++++++++++++++++++++++----
>> ? arch/arm/mach-imx/imx8/Kconfig???????????????????? |??? 1 +
>> ? arch/arm/mach-imx/imx8m/Kconfig??????????????????? |?? 11 +
>> ? arch/arm/mach-imx/imx8m/clock_imx8mm.c???????????? |??? 8 +
>> ? arch/arm/mach-imx/imx8m/clock_imx8mq.c???????????? |??? 7 +
>> ? arch/arm/mach-imx/imx8m/soc.c????????????????????? |? 183
>> ++++++++++++--
>> ? arch/arm/mach-imx/mx7ulp/Kconfig?????????????????? |??? 1 +
>> ? arch/arm/mach-imx/priblob.c??????????????????????? |?? 33 +++
>> ? board/freescale/imx8mm_evk/boot.cmd??????????????? |?? 35 ---
>> ? board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg |??? 9 +
>> ? board/freescale/imx8mm_evk/lpddr4_timing.c???????? |? 692
>> +++++++++++++++++++++-------------------------------
>> ? board/freescale/imx8mm_evk/spl.c?????????????????? |?? 33 +--
>> ? board/freescale/imx8mn_evk/Kconfig???????????????? |??? 6 +-
>> ? board/freescale/imx8mn_evk/Makefile??????????????? |??? 6 +
>> ? board/freescale/imx8mn_evk/ddr4_timing.c?????????? | 1057
>> ++++++++++++++++++++++++++++++++++----------------------------------------------
>>
>> ? board/freescale/imx8mn_evk/ddr4_timing_ld.c??????? | 1057
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>
>> ? board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg?? |?? 10 +
>> ? board/freescale/imx8mn_evk/lpddr4_timing.c???????? | 1587
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>
>> ? board/freescale/imx8mn_evk/lpddr4_timing_ld.c????? | 1440
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>
>> ? board/freescale/imx8mn_evk/spl.c?????????????????? |?? 50 +++-
>> ? board/freescale/imx8mp_evk/boot.cmd??????????????? |?? 25 --
>> ? board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg |?? 10 +
>> ? board/freescale/imx8mp_evk/lpddr4_timing.c???????? |? 372
>> +++++++++++++++++++++-------
>> ? board/freescale/imx8mp_evk/spl.c?????????????????? |?? 38 +--
>> ? board/freescale/imx8mq_evk/spl.c?????????????????? |??? 2 +-
>> ? board/phytec/phycore_imx8mp/spl.c????????????????? |??? 2 +-
>> ? cmd/Kconfig??????????????????????????????????????? |??? 8 +
>> ? cmd/Makefile?????????????????????????????????????? |??? 1 +
>> ? cmd/blob.c???????????????????????????????????????? |?? 16 ++
>> ? cmd/cmd_fsl_caam.c???????????????????????????????? |?? 88 +++++++
>> ? configs/imx8mm_evk_defconfig?????????????????????? |??? 6 +-
>> ? configs/imx8mn_ddr4_evk_defconfig????????????????? |??? 4 +-
>> ? configs/imx8mn_evk_defconfig?????????????????????? |?? 93 +++++++
>> ? configs/imx8mp_evk_defconfig?????????????????????? |??? 4 +-
>> ? doc/board/freescale/imx8mm_evk.rst???????????????? |??? 3 +-
>> ? doc/board/freescale/imx8mn_evk.rst???????????????? |??? 3 +-
>> ? doc/board/freescale/imx8mp_evk.rst???????????????? |?? 11 +-
>> ? doc/imx/habv4/guides/mx6_mx7_secure_boot.txt?????? |?? 25 ++
>> ? drivers/crypto/Makefile??????????????????????????? |??? 1 +
>> ? drivers/crypto/fsl/Kconfig???????????????????????? |??? 6 +
>> ? drivers/crypto/fsl/Makefile??????????????????????? |??? 4 +-
>> ? drivers/crypto/fsl/desc.h????????????????????????? |?? 49 ++--
>> ? drivers/crypto/fsl/desc_constr.h?????????????????? |?? 28 +--
>> ? drivers/crypto/fsl/fsl_blob.c????????????????????? |??? 6 +
>> ? drivers/crypto/fsl/fsl_hash.c????????????????????? |??? 6 +-
>> ? drivers/crypto/fsl/fsl_mfgprot.c?????????????????? |? 160 ++++++++++++
>> ? drivers/crypto/fsl/jobdesc.c?????????????????????? |?? 16 +-
>> ? drivers/crypto/fsl/jr.c??????????????????????????? |?? 53 ++--
>> ? drivers/crypto/fsl/jr.h??????????????????????????? |?? 11 +-
>> ? drivers/crypto/fsl/type.h????????????????????????? |?? 16 ++
>> ? drivers/crypto/fsl_caam.c????????????????????????? |? 720
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> ? drivers/crypto/fsl_caam_internal.h???????????????? |? 230
>> ++++++++++++++++++
>> ? drivers/ddr/imx/imx8m/Kconfig????????????????????? |??? 8 +
>> ? drivers/misc/mxc_ocotp.c?????????????????????????? |??? 2 +-
>> ? drivers/power/pmic/pmic_pca9450.c????????????????? |??? 4 +-
>> ? include/configs/imx8mm_evk.h?????????????????????? |??? 8 +-
>> ? include/configs/imx8mp_evk.h?????????????????????? |??? 8 +-
>> ? include/fsl_caam.h???????????????????????????????? |?? 24 ++
>> ? include/fsl_sec.h????????????????????????????????? |?? 54 +++--
>> ? include/power/pca9450.h??????????????????????????? |??? 2 +-
>> ? tools/imx8image.c????????????????????????????????? |??? 2 +-
>> ? tools/imx8mimage.c???????????????????????????????? |??? 2 +-
>> ? tools/logos/freescale.bmp????????????????????????? |? Bin 46738 ->
>> 47670 bytes
>> ? 84 files changed, 8600 insertions(+), 1484 deletions(-)
>> ? create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
>> ? create mode 100644 arch/arm/dts/imx8mn-evk.dts
>> ? create mode 100644 arch/arm/mach-imx/cmd_mfgprot.c
>> ? create mode 100644 arch/arm/mach-imx/priblob.c
>> ? delete mode 100644 board/freescale/imx8mm_evk/boot.cmd
>> ? create mode 100644 board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg
>> ? create mode 100644 board/freescale/imx8mn_evk/ddr4_timing_ld.c
>> ? create mode 100644 board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg
>> ? create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
>> ? create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing_ld.c
>> ? delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
>> ? create mode 100644 board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg
>> ? mode change 100644 => 100755 board/freescale/imx8mp_evk/lpddr4_timing.c
>> ? create mode 100644 cmd/cmd_fsl_caam.c
>> ? create mode 100644 configs/imx8mn_evk_defconfig
>> ? create mode 100644 drivers/crypto/fsl/fsl_mfgprot.c
>> ? create mode 100644 drivers/crypto/fsl/type.h
>> ? create mode 100644 drivers/crypto/fsl_caam.c
>> ? create mode 100644 drivers/crypto/fsl_caam_internal.h
>> ? create mode 100644 include/fsl_caam.h
>>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [NXP-IMX] please pull nxp-imx-2021-4-6
2021-04-06 9:34 [NXP-IMX] please pull nxp-imx-2021-4-6 Peng Fan
2021-04-06 9:45 ` Stefano Babic
2021-04-07 5:27 ` Peng Fan
@ 2021-05-27 14:47 ` Frieder Schrempf
2021-05-27 14:59 ` Stefano Babic
2 siblings, 1 reply; 10+ messages in thread
From: Frieder Schrempf @ 2021-05-27 14:47 UTC (permalink / raw)
To: Peng Fan (OSS), Stefano Babic, Fabio Estevam; +Cc: u-boot
Hi,
On 06.04.21 11:34, Peng Fan (OSS) wrote:
> Hi Stefano,
>
> Please pull nxp-imx-2021-4-6. This PR is based on Tom's master branch. If you need
> me rebase on imx/master, I could redo this PR. This is quite a large PR, since lots
> stuff in downstream tree.
>
> I ran local buildman test for all boards, no issue found.
> ------------------------------------------
> convert to use binman for i.MX8MN/M/P EVK board
It looks like these patches haven't been sent to the list. Is this common practice to have patches pulled via PR that were not sent to the list before? To me it feels wrong as there is no chance they will ever get reviewed/tested before merging, but I don't know the rules.
@Peng: Since using binman to build the images there is the following output:
WARNING 'mkimage.flash.mkimage' not found, resulting binary is not-functional
make[2]: Nothing to be done for 'SPL'.
Why is it there? How to get rid of it?
Thanks
Frieder
> i.MX8M caam/dek support
> hab update/fix for i.MX8M/7ULP
> env/distro cleanup for i.MX8M
> i.MX8M ddr script/driver update
> ------------------------------------------
>
> Thanks,
> Peng.
>
> The following changes since commit 90eba245a66aa20589404ba537215faf2012c1a3:
>
> Merge branch 'next' (2021-04-05 11:29:57 -0400)
>
> are available in the Git repository at:
>
> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FMrVan%2Fu-boot.git&data=04%7C01%7Cfrieder.schrempf%40kontron.de%7C2ed49d663d694871619d08d8f8df37e6%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637532984941310093%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=QEMqCBw9qvbdQfELx%2BpMAMTjw5Z7kgpo5G%2FzwTaLULY%3D&reserved=0 tags/nxp-imx-2021-4-6
>
> for you to fetch changes up to 95dfcc086b419aece6835fd7aaad704de661e246:
>
> doc: imx8mp-evk: update after using binman (2021-04-06 17:19:45 +0800)
>
> ----------------------------------------------------------------
> Aymen Sghaier (6):
> crypto: caam: Add CAAM support to i.MX8M platforms
> crypto: caam: Fix build warnings pointer casting
> crypto: Add blob command support for i.MX8M platforms
> crypto: caam: Fix pointer size to 32bit for i.MX8M
> crypto: caam: Add secure memory vid 3 support
> crypto: caam: RNG4 TRNG errata
>
> Breno Lima (13):
> imx: imx7 Support for Manufacturing Protection
> imx: Avoid hardcoded output ring size register offset (ORSR)
> imx: Ensure CAAM clock is enabled prior getting out_jr_size
> imx: Avoid hardcoded Job Ring Max size
> imx: hab: Enable hab.c to authenticate additional images in open configuration
> imx: hab: Check if IVT header is HABv4
> mx7ulp: hab: Add hab_status command for HABv4 M4 boot
> imx: hab: Fix build warnings in 32-bit targets
> crypto: fsl: blob: Flush dcache range for destination address
> mx6dq: hab: Fix chip version in hab.h code
> cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
> cmd: blob: Instantiate RNG before running CMD_BLOB
> fsl_mfgprot: Fix typo in sign_mppubk()
>
> Clement Faure (2):
> imx8m: Add DEK blob encapsulation for imx8m
> imx8: Add DEK blob encapsulation
>
> Clement Le Marquis (1):
> imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM SCFGR register to 0x3
>
> Franck LENORMAND (3):
> crypto: caam: change JR running loop
> caam: enable support for iMX7ULP
> imx7ulp: Enable support for cmd blob
>
> Jacky Bai (1):
> imx8mn: Update the DDR4 timing script on imx8mn ddr4 evk
>
> Peng Fan (21):
> tools: imx image: fix write warning
> imx8mm/p: remove boot.cmd
> imx8mm_evk: add/cleanup variable for distro
> imx8mp_evk: add/cleanup variable for distro
> imx8mp_evk: spl: clean up including headers
> imx8mp_evk: Increase VDD_ARM to 0.95v Overdrive voltage
> power: pca9450: add a new parameter for power_pca9450_init
> imx8mn_evk: drop duplicated code
> imx8mn: Add LPDDR4 EVK board support
> imx: logos: use NXP logo
> imx8m: soc: update fuse path
> arch: mach-imx: imx8m: fix unique_id read error for imx8mp
> imx: HAB: Update hab codes to support ARM64 and i.MX8M
> imx8m: add regs used by CAAM
> imx8mm_evk: switch to use binman to pack images
> doc: imx8mm_evk: update doc after using binman
> imx8mn-ddr4-evk: switch to use binman
> imx8mn-evk: switch to use binman
> doc: imx8mn_evk: update doc after using binman
> imx8mp-evk: switch to use binman
> doc: imx8mp-evk: update after using binman
>
> Sherry Sun (1):
> imx8mp: ddr: Add inline ECC feature support
>
> Utkarsh Gupta (2):
> imx: HAB: Validate IVT before authenticating image
> imx: hab: Display All HAB events via hab_status command
>
> Ye Li (18):
> imx8mm_evk: Update to latest LPDDR4 script
> imx8mm_evk: Switch to new imx8mm evk board
> imx8mp_evk: Update LPDDR4 timing for new FW 202006
> imx8mp_evk: Update LPDDR4 refresh time
> imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
> imx8mn: Add support for 11x11 UltraLite part number
> imx8m: Update thermal and PMU kernel nodes for dual/single cores
> imx8m: ddr: Disable CA VREF Training for LPDDR4
> iMX8MQ: Recognize the B2 revision
> misc: ocotp: Update OCOTP driver for iMX8MQ B2
> imx8mq_evk: Applying default LPDDR4 script for B2
> imx: hab: Add function to authenticate kernel image
> hab: Change calling to ROM API failsafe
> imx: HAB: Add support for iMX8MM
> iMX8M: Add support to enable CONFIG_IMX_HAB
> imx: cmd_dek: Enable DEK only for chips supporting CAAM
> crypto: caam: Add fsl caam driver
> crypto: fsl: refactor for 32 bit version CAAM support on ARM64
>
> haidong.zheng (1):
> imx8mp: refine power on imx8mp board
>
> arch/arm/Kconfig | 6 +
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/imx8mm-evk-u-boot.dtsi | 117 ++++++++-
> arch/arm/dts/imx8mm-evk.dtsi | 127 +++++-----
> arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 115 +++++++++
> arch/arm/dts/imx8mn-evk-u-boot.dtsi | 128 ++++++++++
> arch/arm/dts/imx8mn-evk.dts | 128 ++++++++++
> arch/arm/dts/imx8mp-evk-u-boot.dtsi | 112 +++++++++
> arch/arm/include/asm/arch-imx/cpu.h | 13 +-
> arch/arm/include/asm/arch-imx8/image.h | 11 +
> arch/arm/include/asm/arch-imx8m/clock.h | 1 +
> arch/arm/include/asm/arch-imx8m/imx-regs.h | 21 ++
> arch/arm/include/asm/arch-mx7/crm_regs.h | 8 +
> arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 12 +
> arch/arm/include/asm/mach-imx/hab.h | 37 ++-
> arch/arm/include/asm/mach-imx/sys_proto.h | 6 +-
> arch/arm/mach-imx/Kconfig | 44 +++-
> arch/arm/mach-imx/Makefile | 3 +
> arch/arm/mach-imx/cmd_dek.c | 262 ++++++++++++++++++--
> arch/arm/mach-imx/cmd_mfgprot.c | 150 ++++++++++++
> arch/arm/mach-imx/cpu.c | 8 +-
> arch/arm/mach-imx/hab.c | 417 ++++++++++++++++++++++++++++----
> arch/arm/mach-imx/imx8/Kconfig | 1 +
> arch/arm/mach-imx/imx8m/Kconfig | 11 +
> arch/arm/mach-imx/imx8m/clock_imx8mm.c | 8 +
> arch/arm/mach-imx/imx8m/clock_imx8mq.c | 7 +
> arch/arm/mach-imx/imx8m/soc.c | 183 ++++++++++++--
> arch/arm/mach-imx/mx7ulp/Kconfig | 1 +
> arch/arm/mach-imx/priblob.c | 33 +++
> board/freescale/imx8mm_evk/boot.cmd | 35 ---
> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg | 9 +
> board/freescale/imx8mm_evk/lpddr4_timing.c | 692 +++++++++++++++++++++-------------------------------
> board/freescale/imx8mm_evk/spl.c | 33 +--
> board/freescale/imx8mn_evk/Kconfig | 6 +-
> board/freescale/imx8mn_evk/Makefile | 6 +
> board/freescale/imx8mn_evk/ddr4_timing.c | 1057 ++++++++++++++++++++++++++++++++++----------------------------------------------
> board/freescale/imx8mn_evk/ddr4_timing_ld.c | 1057 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg | 10 +
> board/freescale/imx8mn_evk/lpddr4_timing.c | 1587 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mn_evk/lpddr4_timing_ld.c | 1440 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> board/freescale/imx8mn_evk/spl.c | 50 +++-
> board/freescale/imx8mp_evk/boot.cmd | 25 --
> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg | 10 +
> board/freescale/imx8mp_evk/lpddr4_timing.c | 372 +++++++++++++++++++++-------
> board/freescale/imx8mp_evk/spl.c | 38 +--
> board/freescale/imx8mq_evk/spl.c | 2 +-
> board/phytec/phycore_imx8mp/spl.c | 2 +-
> cmd/Kconfig | 8 +
> cmd/Makefile | 1 +
> cmd/blob.c | 16 ++
> cmd/cmd_fsl_caam.c | 88 +++++++
> configs/imx8mm_evk_defconfig | 6 +-
> configs/imx8mn_ddr4_evk_defconfig | 4 +-
> configs/imx8mn_evk_defconfig | 93 +++++++
> configs/imx8mp_evk_defconfig | 4 +-
> doc/board/freescale/imx8mm_evk.rst | 3 +-
> doc/board/freescale/imx8mn_evk.rst | 3 +-
> doc/board/freescale/imx8mp_evk.rst | 11 +-
> doc/imx/habv4/guides/mx6_mx7_secure_boot.txt | 25 ++
> drivers/crypto/Makefile | 1 +
> drivers/crypto/fsl/Kconfig | 6 +
> drivers/crypto/fsl/Makefile | 4 +-
> drivers/crypto/fsl/desc.h | 49 ++--
> drivers/crypto/fsl/desc_constr.h | 28 +--
> drivers/crypto/fsl/fsl_blob.c | 6 +
> drivers/crypto/fsl/fsl_hash.c | 6 +-
> drivers/crypto/fsl/fsl_mfgprot.c | 160 ++++++++++++
> drivers/crypto/fsl/jobdesc.c | 16 +-
> drivers/crypto/fsl/jr.c | 53 ++--
> drivers/crypto/fsl/jr.h | 11 +-
> drivers/crypto/fsl/type.h | 16 ++
> drivers/crypto/fsl_caam.c | 720 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/crypto/fsl_caam_internal.h | 230 ++++++++++++++++++
> drivers/ddr/imx/imx8m/Kconfig | 8 +
> drivers/misc/mxc_ocotp.c | 2 +-
> drivers/power/pmic/pmic_pca9450.c | 4 +-
> include/configs/imx8mm_evk.h | 8 +-
> include/configs/imx8mp_evk.h | 8 +-
> include/fsl_caam.h | 24 ++
> include/fsl_sec.h | 54 +++--
> include/power/pca9450.h | 2 +-
> tools/imx8image.c | 2 +-
> tools/imx8mimage.c | 2 +-
> tools/logos/freescale.bmp | Bin 46738 -> 47670 bytes
> 84 files changed, 8600 insertions(+), 1484 deletions(-)
> create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
> create mode 100644 arch/arm/dts/imx8mn-evk.dts
> create mode 100644 arch/arm/mach-imx/cmd_mfgprot.c
> create mode 100644 arch/arm/mach-imx/priblob.c
> delete mode 100644 board/freescale/imx8mm_evk/boot.cmd
> create mode 100644 board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg
> create mode 100644 board/freescale/imx8mn_evk/ddr4_timing_ld.c
> create mode 100644 board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg
> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing_ld.c
> delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
> create mode 100644 board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg
> mode change 100644 => 100755 board/freescale/imx8mp_evk/lpddr4_timing.c
> create mode 100644 cmd/cmd_fsl_caam.c
> create mode 100644 configs/imx8mn_evk_defconfig
> create mode 100644 drivers/crypto/fsl/fsl_mfgprot.c
> create mode 100644 drivers/crypto/fsl/type.h
> create mode 100644 drivers/crypto/fsl_caam.c
> create mode 100644 drivers/crypto/fsl_caam_internal.h
> create mode 100644 include/fsl_caam.h
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [NXP-IMX] please pull nxp-imx-2021-4-6
2021-05-27 14:47 ` Frieder Schrempf
@ 2021-05-27 14:59 ` Stefano Babic
2021-05-27 15:09 ` Frieder Schrempf
2021-05-27 15:27 ` Sean Anderson
0 siblings, 2 replies; 10+ messages in thread
From: Stefano Babic @ 2021-05-27 14:59 UTC (permalink / raw)
To: Frieder Schrempf, Peng Fan (OSS), Stefano Babic, Fabio Estevam; +Cc: u-boot
Hi Frieder,
On 27.05.21 16:47, Frieder Schrempf wrote:
> Hi,
>
> On 06.04.21 11:34, Peng Fan (OSS) wrote:
>> Hi Stefano,
>>
>> Please pull nxp-imx-2021-4-6. This PR is based on Tom's master branch. If you need
>> me rebase on imx/master, I could redo this PR. This is quite a large PR, since lots
>> stuff in downstream tree.
>>
>> I ran local buildman test for all boards, no issue found.
>> ------------------------------------------
>> convert to use binman for i.MX8MN/M/P EVK board
>
> It looks like these patches haven't been sent to the list. Is this common practice to have patches pulled via PR that were not sent to the list before?
Never. Patches *MUST* be sent to the ML. I am sorry if some patches were
pulled by me and they were not in the ML: it is then a mistake. Anyway,
my work-flow foresees to get patches from patchworks and update the
status after merging, and it is weird if some patches were not posted.
For the patches reported here, they were posted and you get at:
http://patchwork.ozlabs.org/project/uboot/list/?series=235820&state=*
but again, if some patches were merged without beeing posted, it was
just a big mistake. It should not happen !
> To me it feels wrong as there is no chance they will ever get reviewed/tested before merging,
You're right, and patches must be posted without exceptions.
> but I don't know the rules.
Your feeling is correct.
>
> @Peng: Since using binman to build the images there is the following output:
>
> WARNING 'mkimage.flash.mkimage' not found, resulting binary is not-functional
> make[2]: Nothing to be done for 'SPL'.
>
> Why is it there? How to get rid of it?
>
Best regards,
Stefano
> Thanks
> Frieder
>
>> i.MX8M caam/dek support
>> hab update/fix for i.MX8M/7ULP
>> env/distro cleanup for i.MX8M
>> i.MX8M ddr script/driver update
>> ------------------------------------------
>>
>> Thanks,
>> Peng.
>>
>> The following changes since commit 90eba245a66aa20589404ba537215faf2012c1a3:
>>
>> Merge branch 'next' (2021-04-05 11:29:57 -0400)
>>
>> are available in the Git repository at:
>>
>> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FMrVan%2Fu-boot.git&data=04%7C01%7Cfrieder.schrempf%40kontron.de%7C2ed49d663d694871619d08d8f8df37e6%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637532984941310093%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=QEMqCBw9qvbdQfELx%2BpMAMTjw5Z7kgpo5G%2FzwTaLULY%3D&reserved=0 tags/nxp-imx-2021-4-6
>>
>> for you to fetch changes up to 95dfcc086b419aece6835fd7aaad704de661e246:
>>
>> doc: imx8mp-evk: update after using binman (2021-04-06 17:19:45 +0800)
>>
>> ----------------------------------------------------------------
>> Aymen Sghaier (6):
>> crypto: caam: Add CAAM support to i.MX8M platforms
>> crypto: caam: Fix build warnings pointer casting
>> crypto: Add blob command support for i.MX8M platforms
>> crypto: caam: Fix pointer size to 32bit for i.MX8M
>> crypto: caam: Add secure memory vid 3 support
>> crypto: caam: RNG4 TRNG errata
>>
>> Breno Lima (13):
>> imx: imx7 Support for Manufacturing Protection
>> imx: Avoid hardcoded output ring size register offset (ORSR)
>> imx: Ensure CAAM clock is enabled prior getting out_jr_size
>> imx: Avoid hardcoded Job Ring Max size
>> imx: hab: Enable hab.c to authenticate additional images in open configuration
>> imx: hab: Check if IVT header is HABv4
>> mx7ulp: hab: Add hab_status command for HABv4 M4 boot
>> imx: hab: Fix build warnings in 32-bit targets
>> crypto: fsl: blob: Flush dcache range for destination address
>> mx6dq: hab: Fix chip version in hab.h code
>> cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
>> cmd: blob: Instantiate RNG before running CMD_BLOB
>> fsl_mfgprot: Fix typo in sign_mppubk()
>>
>> Clement Faure (2):
>> imx8m: Add DEK blob encapsulation for imx8m
>> imx8: Add DEK blob encapsulation
>>
>> Clement Le Marquis (1):
>> imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM SCFGR register to 0x3
>>
>> Franck LENORMAND (3):
>> crypto: caam: change JR running loop
>> caam: enable support for iMX7ULP
>> imx7ulp: Enable support for cmd blob
>>
>> Jacky Bai (1):
>> imx8mn: Update the DDR4 timing script on imx8mn ddr4 evk
>>
>> Peng Fan (21):
>> tools: imx image: fix write warning
>> imx8mm/p: remove boot.cmd
>> imx8mm_evk: add/cleanup variable for distro
>> imx8mp_evk: add/cleanup variable for distro
>> imx8mp_evk: spl: clean up including headers
>> imx8mp_evk: Increase VDD_ARM to 0.95v Overdrive voltage
>> power: pca9450: add a new parameter for power_pca9450_init
>> imx8mn_evk: drop duplicated code
>> imx8mn: Add LPDDR4 EVK board support
>> imx: logos: use NXP logo
>> imx8m: soc: update fuse path
>> arch: mach-imx: imx8m: fix unique_id read error for imx8mp
>> imx: HAB: Update hab codes to support ARM64 and i.MX8M
>> imx8m: add regs used by CAAM
>> imx8mm_evk: switch to use binman to pack images
>> doc: imx8mm_evk: update doc after using binman
>> imx8mn-ddr4-evk: switch to use binman
>> imx8mn-evk: switch to use binman
>> doc: imx8mn_evk: update doc after using binman
>> imx8mp-evk: switch to use binman
>> doc: imx8mp-evk: update after using binman
>>
>> Sherry Sun (1):
>> imx8mp: ddr: Add inline ECC feature support
>>
>> Utkarsh Gupta (2):
>> imx: HAB: Validate IVT before authenticating image
>> imx: hab: Display All HAB events via hab_status command
>>
>> Ye Li (18):
>> imx8mm_evk: Update to latest LPDDR4 script
>> imx8mm_evk: Switch to new imx8mm evk board
>> imx8mp_evk: Update LPDDR4 timing for new FW 202006
>> imx8mp_evk: Update LPDDR4 refresh time
>> imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
>> imx8mn: Add support for 11x11 UltraLite part number
>> imx8m: Update thermal and PMU kernel nodes for dual/single cores
>> imx8m: ddr: Disable CA VREF Training for LPDDR4
>> iMX8MQ: Recognize the B2 revision
>> misc: ocotp: Update OCOTP driver for iMX8MQ B2
>> imx8mq_evk: Applying default LPDDR4 script for B2
>> imx: hab: Add function to authenticate kernel image
>> hab: Change calling to ROM API failsafe
>> imx: HAB: Add support for iMX8MM
>> iMX8M: Add support to enable CONFIG_IMX_HAB
>> imx: cmd_dek: Enable DEK only for chips supporting CAAM
>> crypto: caam: Add fsl caam driver
>> crypto: fsl: refactor for 32 bit version CAAM support on ARM64
>>
>> haidong.zheng (1):
>> imx8mp: refine power on imx8mp board
>>
>> arch/arm/Kconfig | 6 +
>> arch/arm/dts/Makefile | 1 +
>> arch/arm/dts/imx8mm-evk-u-boot.dtsi | 117 ++++++++-
>> arch/arm/dts/imx8mm-evk.dtsi | 127 +++++-----
>> arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 115 +++++++++
>> arch/arm/dts/imx8mn-evk-u-boot.dtsi | 128 ++++++++++
>> arch/arm/dts/imx8mn-evk.dts | 128 ++++++++++
>> arch/arm/dts/imx8mp-evk-u-boot.dtsi | 112 +++++++++
>> arch/arm/include/asm/arch-imx/cpu.h | 13 +-
>> arch/arm/include/asm/arch-imx8/image.h | 11 +
>> arch/arm/include/asm/arch-imx8m/clock.h | 1 +
>> arch/arm/include/asm/arch-imx8m/imx-regs.h | 21 ++
>> arch/arm/include/asm/arch-mx7/crm_regs.h | 8 +
>> arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 12 +
>> arch/arm/include/asm/mach-imx/hab.h | 37 ++-
>> arch/arm/include/asm/mach-imx/sys_proto.h | 6 +-
>> arch/arm/mach-imx/Kconfig | 44 +++-
>> arch/arm/mach-imx/Makefile | 3 +
>> arch/arm/mach-imx/cmd_dek.c | 262 ++++++++++++++++++--
>> arch/arm/mach-imx/cmd_mfgprot.c | 150 ++++++++++++
>> arch/arm/mach-imx/cpu.c | 8 +-
>> arch/arm/mach-imx/hab.c | 417 ++++++++++++++++++++++++++++----
>> arch/arm/mach-imx/imx8/Kconfig | 1 +
>> arch/arm/mach-imx/imx8m/Kconfig | 11 +
>> arch/arm/mach-imx/imx8m/clock_imx8mm.c | 8 +
>> arch/arm/mach-imx/imx8m/clock_imx8mq.c | 7 +
>> arch/arm/mach-imx/imx8m/soc.c | 183 ++++++++++++--
>> arch/arm/mach-imx/mx7ulp/Kconfig | 1 +
>> arch/arm/mach-imx/priblob.c | 33 +++
>> board/freescale/imx8mm_evk/boot.cmd | 35 ---
>> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg | 9 +
>> board/freescale/imx8mm_evk/lpddr4_timing.c | 692 +++++++++++++++++++++-------------------------------
>> board/freescale/imx8mm_evk/spl.c | 33 +--
>> board/freescale/imx8mn_evk/Kconfig | 6 +-
>> board/freescale/imx8mn_evk/Makefile | 6 +
>> board/freescale/imx8mn_evk/ddr4_timing.c | 1057 ++++++++++++++++++++++++++++++++++----------------------------------------------
>> board/freescale/imx8mn_evk/ddr4_timing_ld.c | 1057 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg | 10 +
>> board/freescale/imx8mn_evk/lpddr4_timing.c | 1587 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> board/freescale/imx8mn_evk/lpddr4_timing_ld.c | 1440 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> board/freescale/imx8mn_evk/spl.c | 50 +++-
>> board/freescale/imx8mp_evk/boot.cmd | 25 --
>> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg | 10 +
>> board/freescale/imx8mp_evk/lpddr4_timing.c | 372 +++++++++++++++++++++-------
>> board/freescale/imx8mp_evk/spl.c | 38 +--
>> board/freescale/imx8mq_evk/spl.c | 2 +-
>> board/phytec/phycore_imx8mp/spl.c | 2 +-
>> cmd/Kconfig | 8 +
>> cmd/Makefile | 1 +
>> cmd/blob.c | 16 ++
>> cmd/cmd_fsl_caam.c | 88 +++++++
>> configs/imx8mm_evk_defconfig | 6 +-
>> configs/imx8mn_ddr4_evk_defconfig | 4 +-
>> configs/imx8mn_evk_defconfig | 93 +++++++
>> configs/imx8mp_evk_defconfig | 4 +-
>> doc/board/freescale/imx8mm_evk.rst | 3 +-
>> doc/board/freescale/imx8mn_evk.rst | 3 +-
>> doc/board/freescale/imx8mp_evk.rst | 11 +-
>> doc/imx/habv4/guides/mx6_mx7_secure_boot.txt | 25 ++
>> drivers/crypto/Makefile | 1 +
>> drivers/crypto/fsl/Kconfig | 6 +
>> drivers/crypto/fsl/Makefile | 4 +-
>> drivers/crypto/fsl/desc.h | 49 ++--
>> drivers/crypto/fsl/desc_constr.h | 28 +--
>> drivers/crypto/fsl/fsl_blob.c | 6 +
>> drivers/crypto/fsl/fsl_hash.c | 6 +-
>> drivers/crypto/fsl/fsl_mfgprot.c | 160 ++++++++++++
>> drivers/crypto/fsl/jobdesc.c | 16 +-
>> drivers/crypto/fsl/jr.c | 53 ++--
>> drivers/crypto/fsl/jr.h | 11 +-
>> drivers/crypto/fsl/type.h | 16 ++
>> drivers/crypto/fsl_caam.c | 720 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> drivers/crypto/fsl_caam_internal.h | 230 ++++++++++++++++++
>> drivers/ddr/imx/imx8m/Kconfig | 8 +
>> drivers/misc/mxc_ocotp.c | 2 +-
>> drivers/power/pmic/pmic_pca9450.c | 4 +-
>> include/configs/imx8mm_evk.h | 8 +-
>> include/configs/imx8mp_evk.h | 8 +-
>> include/fsl_caam.h | 24 ++
>> include/fsl_sec.h | 54 +++--
>> include/power/pca9450.h | 2 +-
>> tools/imx8image.c | 2 +-
>> tools/imx8mimage.c | 2 +-
>> tools/logos/freescale.bmp | Bin 46738 -> 47670 bytes
>> 84 files changed, 8600 insertions(+), 1484 deletions(-)
>> create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
>> create mode 100644 arch/arm/dts/imx8mn-evk.dts
>> create mode 100644 arch/arm/mach-imx/cmd_mfgprot.c
>> create mode 100644 arch/arm/mach-imx/priblob.c
>> delete mode 100644 board/freescale/imx8mm_evk/boot.cmd
>> create mode 100644 board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg
>> create mode 100644 board/freescale/imx8mn_evk/ddr4_timing_ld.c
>> create mode 100644 board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg
>> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
>> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing_ld.c
>> delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
>> create mode 100644 board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg
>> mode change 100644 => 100755 board/freescale/imx8mp_evk/lpddr4_timing.c
>> create mode 100644 cmd/cmd_fsl_caam.c
>> create mode 100644 configs/imx8mn_evk_defconfig
>> create mode 100644 drivers/crypto/fsl/fsl_mfgprot.c
>> create mode 100644 drivers/crypto/fsl/type.h
>> create mode 100644 drivers/crypto/fsl_caam.c
>> create mode 100644 drivers/crypto/fsl_caam_internal.h
>> create mode 100644 include/fsl_caam.h
>>
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [NXP-IMX] please pull nxp-imx-2021-4-6
2021-05-27 14:59 ` Stefano Babic
@ 2021-05-27 15:09 ` Frieder Schrempf
2021-05-27 15:27 ` Sean Anderson
1 sibling, 0 replies; 10+ messages in thread
From: Frieder Schrempf @ 2021-05-27 15:09 UTC (permalink / raw)
To: Stefano Babic, Peng Fan (OSS), Fabio Estevam; +Cc: u-boot
Hi Stefano,
On 27.05.21 16:59, Stefano Babic wrote:
> Hi Frieder,
>
> On 27.05.21 16:47, Frieder Schrempf wrote:
>> Hi,
>>
>> On 06.04.21 11:34, Peng Fan (OSS) wrote:
>>> Hi Stefano,
>>>
>>> Please pull nxp-imx-2021-4-6. This PR is based on Tom's master branch. If you need
>>> me rebase on imx/master, I could redo this PR. This is quite a large PR, since lots
>>> stuff in downstream tree.
>>>
>>> I ran local buildman test for all boards, no issue found.
>>> ------------------------------------------
>>> convert to use binman for i.MX8MN/M/P EVK board
>>
>> It looks like these patches haven't been sent to the list. Is this common practice to have patches pulled via PR that were not sent to the list before?
>
> Never. Patches *MUST* be sent to the ML. I am sorry if some patches were pulled by me and they were not in the ML: it is then a mistake. Anyway, my work-flow foresees to get patches from patchworks and update the status after merging, and it is weird if some patches were not posted.
>
> For the patches reported here, they were posted and you get at:
>
> https://eur04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatchwork.ozlabs.org%2Fproject%2Fuboot%2Flist%2F%3Fseries%3D235820%26state%3D*&data=04%7C01%7Cfrieder.schrempf%40kontron.de%7C6757587cd70a41af63f308d9211fff81%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637577243581770096%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=AkXzKPgEtURhDXRY4tfdu4BjFCqOKBYYPyQ0JSXusn0%3D&reserved=0
>
> but again, if some patches were merged without beeing posted, it was just a big mistake. It should not happen !
>
>> To me it feels wrong as there is no chance they will ever get reviewed/tested before merging,
>
> You're right, and patches must be posted without exceptions.
>
>> but I don't know the rules.
>
> Your feeling is correct.
Thanks for clarifying and for pointing to patchwork. I should have been looking there before. Your link points to a different series, but I found the patches I was looking for here: http://patchwork.ozlabs.org/project/uboot/list/?series=237531&state=%2A&archive=both.
For some reason I can't find them in my mailbox, but that's probably a different story.
Thanks a lot!
Frieder
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [NXP-IMX] please pull nxp-imx-2021-4-6
2021-05-27 14:59 ` Stefano Babic
2021-05-27 15:09 ` Frieder Schrempf
@ 2021-05-27 15:27 ` Sean Anderson
2021-05-27 15:40 ` Stefano Babic
1 sibling, 1 reply; 10+ messages in thread
From: Sean Anderson @ 2021-05-27 15:27 UTC (permalink / raw)
To: Stefano Babic, Frieder Schrempf, Peng Fan (OSS), Fabio Estevam; +Cc: u-boot
On 5/27/21 10:59 AM, Stefano Babic wrote:
> Hi Frieder,
>
> On 27.05.21 16:47, Frieder Schrempf wrote:
>> Hi,
>>
>> On 06.04.21 11:34, Peng Fan (OSS) wrote:
>>> Hi Stefano,
>>>
>>> Please pull nxp-imx-2021-4-6. This PR is based on Tom's master branch. If you need
>>> me rebase on imx/master, I could redo this PR. This is quite a large PR, since lots
>>> stuff in downstream tree.
>>>
>>> I ran local buildman test for all boards, no issue found.
>>> ------------------------------------------
>>> convert to use binman for i.MX8MN/M/P EVK board
>>
>> It looks like these patches haven't been sent to the list. Is this common practice to have patches pulled via PR that were not sent to the list before?
>
> Never. Patches *MUST* be sent to the ML. I am sorry if some patches were pulled by me and they were not in the ML: it is then a mistake. Anyway, my work-flow foresees to get patches from patchworks and update the status after merging, and it is weird if some patches were not posted.
>
> For the patches reported here, they were posted and you get at:
>
> http://patchwork.ozlabs.org/project/uboot/list/?series=235820&state=*
But none of the feedback was addressed. Ex:
https://lore.kernel.org/u-boot/c8f2512d-d35a-748c-1c00-190849ffa525@nxp.com/
https://lore.kernel.org/u-boot/ce3f1e35-d215-6ace-4f38-1b36fc6abfa9@denx.de/
This last one is even your own feedback, but here is the patch anyway. I
don't understand why there is a PR without addressing why we are adding
a second caam driver, which was brought up by two people.
--Sean
>
> but again, if some patches were merged without beeing posted, it was just a big mistake. It should not happen !
>
>> To me it feels wrong as there is no chance they will ever get reviewed/tested before merging,
>
> You're right, and patches must be posted without exceptions.
>
>> but I don't know the rules.
>
> Your feeling is correct.
>
>>
>> @Peng: Since using binman to build the images there is the following output:
>>
>> WARNING 'mkimage.flash.mkimage' not found, resulting binary is not-functional
>> make[2]: Nothing to be done for 'SPL'.
>>
>> Why is it there? How to get rid of it?
>>
>
> Best regards,
> Stefano
>
>> Thanks
>> Frieder
>>
>>> i.MX8M caam/dek support
>>> hab update/fix for i.MX8M/7ULP
>>> env/distro cleanup for i.MX8M
>>> i.MX8M ddr script/driver update
>>> ------------------------------------------
>>>
>>> Thanks,
>>> Peng.
>>>
>>> The following changes since commit 90eba245a66aa20589404ba537215faf2012c1a3:
>>>
>>> Merge branch 'next' (2021-04-05 11:29:57 -0400)
>>>
>>> are available in the Git repository at:
>>>
>>> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FMrVan%2Fu-boot.git&data=04%7C01%7Cfrieder.schrempf%40kontron.de%7C2ed49d663d694871619d08d8f8df37e6%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637532984941310093%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=QEMqCBw9qvbdQfELx%2BpMAMTjw5Z7kgpo5G%2FzwTaLULY%3D&reserved=0 tags/nxp-imx-2021-4-6
>>>
>>> for you to fetch changes up to 95dfcc086b419aece6835fd7aaad704de661e246:
>>>
>>> doc: imx8mp-evk: update after using binman (2021-04-06 17:19:45 +0800)
>>>
>>> ----------------------------------------------------------------
>>> Aymen Sghaier (6):
>>> crypto: caam: Add CAAM support to i.MX8M platforms
>>> crypto: caam: Fix build warnings pointer casting
>>> crypto: Add blob command support for i.MX8M platforms
>>> crypto: caam: Fix pointer size to 32bit for i.MX8M
>>> crypto: caam: Add secure memory vid 3 support
>>> crypto: caam: RNG4 TRNG errata
>>>
>>> Breno Lima (13):
>>> imx: imx7 Support for Manufacturing Protection
>>> imx: Avoid hardcoded output ring size register offset (ORSR)
>>> imx: Ensure CAAM clock is enabled prior getting out_jr_size
>>> imx: Avoid hardcoded Job Ring Max size
>>> imx: hab: Enable hab.c to authenticate additional images in open configuration
>>> imx: hab: Check if IVT header is HABv4
>>> mx7ulp: hab: Add hab_status command for HABv4 M4 boot
>>> imx: hab: Fix build warnings in 32-bit targets
>>> crypto: fsl: blob: Flush dcache range for destination address
>>> mx6dq: hab: Fix chip version in hab.h code
>>> cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
>>> cmd: blob: Instantiate RNG before running CMD_BLOB
>>> fsl_mfgprot: Fix typo in sign_mppubk()
>>>
>>> Clement Faure (2):
>>> imx8m: Add DEK blob encapsulation for imx8m
>>> imx8: Add DEK blob encapsulation
>>>
>>> Clement Le Marquis (1):
>>> imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM SCFGR register to 0x3
>>>
>>> Franck LENORMAND (3):
>>> crypto: caam: change JR running loop
>>> caam: enable support for iMX7ULP
>>> imx7ulp: Enable support for cmd blob
>>>
>>> Jacky Bai (1):
>>> imx8mn: Update the DDR4 timing script on imx8mn ddr4 evk
>>>
>>> Peng Fan (21):
>>> tools: imx image: fix write warning
>>> imx8mm/p: remove boot.cmd
>>> imx8mm_evk: add/cleanup variable for distro
>>> imx8mp_evk: add/cleanup variable for distro
>>> imx8mp_evk: spl: clean up including headers
>>> imx8mp_evk: Increase VDD_ARM to 0.95v Overdrive voltage
>>> power: pca9450: add a new parameter for power_pca9450_init
>>> imx8mn_evk: drop duplicated code
>>> imx8mn: Add LPDDR4 EVK board support
>>> imx: logos: use NXP logo
>>> imx8m: soc: update fuse path
>>> arch: mach-imx: imx8m: fix unique_id read error for imx8mp
>>> imx: HAB: Update hab codes to support ARM64 and i.MX8M
>>> imx8m: add regs used by CAAM
>>> imx8mm_evk: switch to use binman to pack images
>>> doc: imx8mm_evk: update doc after using binman
>>> imx8mn-ddr4-evk: switch to use binman
>>> imx8mn-evk: switch to use binman
>>> doc: imx8mn_evk: update doc after using binman
>>> imx8mp-evk: switch to use binman
>>> doc: imx8mp-evk: update after using binman
>>>
>>> Sherry Sun (1):
>>> imx8mp: ddr: Add inline ECC feature support
>>>
>>> Utkarsh Gupta (2):
>>> imx: HAB: Validate IVT before authenticating image
>>> imx: hab: Display All HAB events via hab_status command
>>>
>>> Ye Li (18):
>>> imx8mm_evk: Update to latest LPDDR4 script
>>> imx8mm_evk: Switch to new imx8mm evk board
>>> imx8mp_evk: Update LPDDR4 timing for new FW 202006
>>> imx8mp_evk: Update LPDDR4 refresh time
>>> imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
>>> imx8mn: Add support for 11x11 UltraLite part number
>>> imx8m: Update thermal and PMU kernel nodes for dual/single cores
>>> imx8m: ddr: Disable CA VREF Training for LPDDR4
>>> iMX8MQ: Recognize the B2 revision
>>> misc: ocotp: Update OCOTP driver for iMX8MQ B2
>>> imx8mq_evk: Applying default LPDDR4 script for B2
>>> imx: hab: Add function to authenticate kernel image
>>> hab: Change calling to ROM API failsafe
>>> imx: HAB: Add support for iMX8MM
>>> iMX8M: Add support to enable CONFIG_IMX_HAB
>>> imx: cmd_dek: Enable DEK only for chips supporting CAAM
>>> crypto: caam: Add fsl caam driver
>>> crypto: fsl: refactor for 32 bit version CAAM support on ARM64
>>>
>>> haidong.zheng (1):
>>> imx8mp: refine power on imx8mp board
>>>
>>> arch/arm/Kconfig | 6 +
>>> arch/arm/dts/Makefile | 1 +
>>> arch/arm/dts/imx8mm-evk-u-boot.dtsi | 117 ++++++++-
>>> arch/arm/dts/imx8mm-evk.dtsi | 127 +++++-----
>>> arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 115 +++++++++
>>> arch/arm/dts/imx8mn-evk-u-boot.dtsi | 128 ++++++++++
>>> arch/arm/dts/imx8mn-evk.dts | 128 ++++++++++
>>> arch/arm/dts/imx8mp-evk-u-boot.dtsi | 112 +++++++++
>>> arch/arm/include/asm/arch-imx/cpu.h | 13 +-
>>> arch/arm/include/asm/arch-imx8/image.h | 11 +
>>> arch/arm/include/asm/arch-imx8m/clock.h | 1 +
>>> arch/arm/include/asm/arch-imx8m/imx-regs.h | 21 ++
>>> arch/arm/include/asm/arch-mx7/crm_regs.h | 8 +
>>> arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 12 +
>>> arch/arm/include/asm/mach-imx/hab.h | 37 ++-
>>> arch/arm/include/asm/mach-imx/sys_proto.h | 6 +-
>>> arch/arm/mach-imx/Kconfig | 44 +++-
>>> arch/arm/mach-imx/Makefile | 3 +
>>> arch/arm/mach-imx/cmd_dek.c | 262 ++++++++++++++++++--
>>> arch/arm/mach-imx/cmd_mfgprot.c | 150 ++++++++++++
>>> arch/arm/mach-imx/cpu.c | 8 +-
>>> arch/arm/mach-imx/hab.c | 417 ++++++++++++++++++++++++++++----
>>> arch/arm/mach-imx/imx8/Kconfig | 1 +
>>> arch/arm/mach-imx/imx8m/Kconfig | 11 +
>>> arch/arm/mach-imx/imx8m/clock_imx8mm.c | 8 +
>>> arch/arm/mach-imx/imx8m/clock_imx8mq.c | 7 +
>>> arch/arm/mach-imx/imx8m/soc.c | 183 ++++++++++++--
>>> arch/arm/mach-imx/mx7ulp/Kconfig | 1 +
>>> arch/arm/mach-imx/priblob.c | 33 +++
>>> board/freescale/imx8mm_evk/boot.cmd | 35 ---
>>> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg | 9 +
>>> board/freescale/imx8mm_evk/lpddr4_timing.c | 692 +++++++++++++++++++++-------------------------------
>>> board/freescale/imx8mm_evk/spl.c | 33 +--
>>> board/freescale/imx8mn_evk/Kconfig | 6 +-
>>> board/freescale/imx8mn_evk/Makefile | 6 +
>>> board/freescale/imx8mn_evk/ddr4_timing.c | 1057 ++++++++++++++++++++++++++++++++++----------------------------------------------
>>> board/freescale/imx8mn_evk/ddr4_timing_ld.c | 1057 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg | 10 +
>>> board/freescale/imx8mn_evk/lpddr4_timing.c | 1587 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> board/freescale/imx8mn_evk/lpddr4_timing_ld.c | 1440 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> board/freescale/imx8mn_evk/spl.c | 50 +++-
>>> board/freescale/imx8mp_evk/boot.cmd | 25 --
>>> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg | 10 +
>>> board/freescale/imx8mp_evk/lpddr4_timing.c | 372 +++++++++++++++++++++-------
>>> board/freescale/imx8mp_evk/spl.c | 38 +--
>>> board/freescale/imx8mq_evk/spl.c | 2 +-
>>> board/phytec/phycore_imx8mp/spl.c | 2 +-
>>> cmd/Kconfig | 8 +
>>> cmd/Makefile | 1 +
>>> cmd/blob.c | 16 ++
>>> cmd/cmd_fsl_caam.c | 88 +++++++
>>> configs/imx8mm_evk_defconfig | 6 +-
>>> configs/imx8mn_ddr4_evk_defconfig | 4 +-
>>> configs/imx8mn_evk_defconfig | 93 +++++++
>>> configs/imx8mp_evk_defconfig | 4 +-
>>> doc/board/freescale/imx8mm_evk.rst | 3 +-
>>> doc/board/freescale/imx8mn_evk.rst | 3 +-
>>> doc/board/freescale/imx8mp_evk.rst | 11 +-
>>> doc/imx/habv4/guides/mx6_mx7_secure_boot.txt | 25 ++
>>> drivers/crypto/Makefile | 1 +
>>> drivers/crypto/fsl/Kconfig | 6 +
>>> drivers/crypto/fsl/Makefile | 4 +-
>>> drivers/crypto/fsl/desc.h | 49 ++--
>>> drivers/crypto/fsl/desc_constr.h | 28 +--
>>> drivers/crypto/fsl/fsl_blob.c | 6 +
>>> drivers/crypto/fsl/fsl_hash.c | 6 +-
>>> drivers/crypto/fsl/fsl_mfgprot.c | 160 ++++++++++++
>>> drivers/crypto/fsl/jobdesc.c | 16 +-
>>> drivers/crypto/fsl/jr.c | 53 ++--
>>> drivers/crypto/fsl/jr.h | 11 +-
>>> drivers/crypto/fsl/type.h | 16 ++
>>> drivers/crypto/fsl_caam.c | 720 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> drivers/crypto/fsl_caam_internal.h | 230 ++++++++++++++++++
>>> drivers/ddr/imx/imx8m/Kconfig | 8 +
>>> drivers/misc/mxc_ocotp.c | 2 +-
>>> drivers/power/pmic/pmic_pca9450.c | 4 +-
>>> include/configs/imx8mm_evk.h | 8 +-
>>> include/configs/imx8mp_evk.h | 8 +-
>>> include/fsl_caam.h | 24 ++
>>> include/fsl_sec.h | 54 +++--
>>> include/power/pca9450.h | 2 +-
>>> tools/imx8image.c | 2 +-
>>> tools/imx8mimage.c | 2 +-
>>> tools/logos/freescale.bmp | Bin 46738 -> 47670 bytes
>>> 84 files changed, 8600 insertions(+), 1484 deletions(-)
>>> create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
>>> create mode 100644 arch/arm/dts/imx8mn-evk.dts
>>> create mode 100644 arch/arm/mach-imx/cmd_mfgprot.c
>>> create mode 100644 arch/arm/mach-imx/priblob.c
>>> delete mode 100644 board/freescale/imx8mm_evk/boot.cmd
>>> create mode 100644 board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg
>>> create mode 100644 board/freescale/imx8mn_evk/ddr4_timing_ld.c
>>> create mode 100644 board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg
>>> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
>>> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing_ld.c
>>> delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
>>> create mode 100644 board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg
>>> mode change 100644 => 100755 board/freescale/imx8mp_evk/lpddr4_timing.c
>>> create mode 100644 cmd/cmd_fsl_caam.c
>>> create mode 100644 configs/imx8mn_evk_defconfig
>>> create mode 100644 drivers/crypto/fsl/fsl_mfgprot.c
>>> create mode 100644 drivers/crypto/fsl/type.h
>>> create mode 100644 drivers/crypto/fsl_caam.c
>>> create mode 100644 drivers/crypto/fsl_caam_internal.h
>>> create mode 100644 include/fsl_caam.h
>>>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [NXP-IMX] please pull nxp-imx-2021-4-6
2021-05-27 15:27 ` Sean Anderson
@ 2021-05-27 15:40 ` Stefano Babic
2021-05-27 15:42 ` Sean Anderson
0 siblings, 1 reply; 10+ messages in thread
From: Stefano Babic @ 2021-05-27 15:40 UTC (permalink / raw)
To: Sean Anderson, Stefano Babic, Frieder Schrempf, Peng Fan (OSS),
Fabio Estevam
Cc: u-boot
Hi Sean,
On 27.05.21 17:27, Sean Anderson wrote:
>
>
> On 5/27/21 10:59 AM, Stefano Babic wrote:
> > Hi Frieder,
> >
> > On 27.05.21 16:47, Frieder Schrempf wrote:
> >> Hi,
> >>
> >> On 06.04.21 11:34, Peng Fan (OSS) wrote:
> >>> Hi Stefano,
> >>>
> >>> Please pull nxp-imx-2021-4-6. This PR is based on Tom's master
> branch. If you need
> >>> me rebase on imx/master, I could redo this PR. This is quite a
> large PR, since lots
> >>> stuff in downstream tree.
> >>>
> >>> I ran local buildman test for all boards, no issue found.
> >>> ------------------------------------------
> >>> convert to use binman for i.MX8MN/M/P EVK board
> >>
> >> It looks like these patches haven't been sent to the list. Is this
> common practice to have patches pulled via PR that were not sent to the
> list before?
> >
> > Never. Patches *MUST* be sent to the ML. I am sorry if some patches
> were pulled by me and they were not in the ML: it is then a mistake.
> Anyway, my work-flow foresees to get patches from patchworks and update
> the status after merging, and it is weird if some patches were not posted.
> >
> > For the patches reported here, they were posted and you get at:
> >
> > http://patchwork.ozlabs.org/project/uboot/list/?series=235820&state=*
>
> But none of the feedback was addressed. Ex:
>
> https://lore.kernel.org/u-boot/c8f2512d-d35a-748c-1c00-190849ffa525@nxp.com/
>
> https://lore.kernel.org/u-boot/ce3f1e35-d215-6ace-4f38-1b36fc6abfa9@denx.de/
>
And in fact, the related patches are not applied - or do you see the
opposite ? There is not a second fsl CAAM driver...
Again, I am sorry if something was picked up without fixing the comments
- but this should not be the case.
>
> This last one is even your own feedback, but here is the patch anyway.
Agree with you, and again, raise your hand as soon as you find that
something slip away and was merged. For i.MX, I will revert before
asking Tom to merge my tree.
> I
> don't understand why there is a PR without addressing why we are adding
> a second caam driver, which was brought up by two people.
PR was sent by Peng, but then it is my responsibility as i.MX maintainer
to take it at whole or drop the patches (if orthogonal, as in this case)
that have open comments. And of course, you're right and comments should
be worked (or at least discussed) before merging into main tree.
Best regards,
Stefano
>
> --Sean
>
> >
> > but again, if some patches were merged without beeing posted, it was
> just a big mistake. It should not happen !
> >
> >> To me it feels wrong as there is no chance they will ever get
> reviewed/tested before merging,
> >
> > You're right, and patches must be posted without exceptions.
> >
> >> but I don't know the rules.
> >
> > Your feeling is correct.
> >
> >>
> >> @Peng: Since using binman to build the images there is the following
> output:
> >>
> >> WARNING 'mkimage.flash.mkimage' not found, resulting binary is
> not-functional
> >> make[2]: Nothing to be done for 'SPL'.
> >>
> >> Why is it there? How to get rid of it?
> >>
> >
> > Best regards,
> > Stefano
> >
> >> Thanks
> >> Frieder
> >>
> >>> i.MX8M caam/dek support
> >>> hab update/fix for i.MX8M/7ULP
> >>> env/distro cleanup for i.MX8M
> >>> i.MX8M ddr script/driver update
> >>> ------------------------------------------
> >>>
> >>> Thanks,
> >>> Peng.
> >>>
> >>> The following changes since commit
> 90eba245a66aa20589404ba537215faf2012c1a3:
> >>>
> >>> Merge branch 'next' (2021-04-05 11:29:57 -0400)
> >>>
> >>> are available in the Git repository at:
> >>>
> >>>
> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FMrVan%2Fu-boot.git&data=04%7C01%7Cfrieder.schrempf%40kontron.de%7C2ed49d663d694871619d08d8f8df37e6%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637532984941310093%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=QEMqCBw9qvbdQfELx%2BpMAMTjw5Z7kgpo5G%2FzwTaLULY%3D&reserved=0
> tags/nxp-imx-2021-4-6
> >>>
> >>> for you to fetch changes up to
> 95dfcc086b419aece6835fd7aaad704de661e246:
> >>>
> >>> doc: imx8mp-evk: update after using binman (2021-04-06 17:19:45
> +0800)
> >>>
> >>> ----------------------------------------------------------------
> >>> Aymen Sghaier (6):
> >>> crypto: caam: Add CAAM support to i.MX8M platforms
> >>> crypto: caam: Fix build warnings pointer casting
> >>> crypto: Add blob command support for i.MX8M platforms
> >>> crypto: caam: Fix pointer size to 32bit for i.MX8M
> >>> crypto: caam: Add secure memory vid 3 support
> >>> crypto: caam: RNG4 TRNG errata
> >>>
> >>> Breno Lima (13):
> >>> imx: imx7 Support for Manufacturing Protection
> >>> imx: Avoid hardcoded output ring size register offset (ORSR)
> >>> imx: Ensure CAAM clock is enabled prior getting out_jr_size
> >>> imx: Avoid hardcoded Job Ring Max size
> >>> imx: hab: Enable hab.c to authenticate additional images in
> open configuration
> >>> imx: hab: Check if IVT header is HABv4
> >>> mx7ulp: hab: Add hab_status command for HABv4 M4 boot
> >>> imx: hab: Fix build warnings in 32-bit targets
> >>> crypto: fsl: blob: Flush dcache range for destination address
> >>> mx6dq: hab: Fix chip version in hab.h code
> >>> cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
> >>> cmd: blob: Instantiate RNG before running CMD_BLOB
> >>> fsl_mfgprot: Fix typo in sign_mppubk()
> >>>
> >>> Clement Faure (2):
> >>> imx8m: Add DEK blob encapsulation for imx8m
> >>> imx8: Add DEK blob encapsulation
> >>>
> >>> Clement Le Marquis (1):
> >>> imx: caam: new u-boot command to set PRIBLOB bitfield from
> CAAM SCFGR register to 0x3
> >>>
> >>> Franck LENORMAND (3):
> >>> crypto: caam: change JR running loop
> >>> caam: enable support for iMX7ULP
> >>> imx7ulp: Enable support for cmd blob
> >>>
> >>> Jacky Bai (1):
> >>> imx8mn: Update the DDR4 timing script on imx8mn ddr4 evk
> >>>
> >>> Peng Fan (21):
> >>> tools: imx image: fix write warning
> >>> imx8mm/p: remove boot.cmd
> >>> imx8mm_evk: add/cleanup variable for distro
> >>> imx8mp_evk: add/cleanup variable for distro
> >>> imx8mp_evk: spl: clean up including headers
> >>> imx8mp_evk: Increase VDD_ARM to 0.95v Overdrive voltage
> >>> power: pca9450: add a new parameter for power_pca9450_init
> >>> imx8mn_evk: drop duplicated code
> >>> imx8mn: Add LPDDR4 EVK board support
> >>> imx: logos: use NXP logo
> >>> imx8m: soc: update fuse path
> >>> arch: mach-imx: imx8m: fix unique_id read error for imx8mp
> >>> imx: HAB: Update hab codes to support ARM64 and i.MX8M
> >>> imx8m: add regs used by CAAM
> >>> imx8mm_evk: switch to use binman to pack images
> >>> doc: imx8mm_evk: update doc after using binman
> >>> imx8mn-ddr4-evk: switch to use binman
> >>> imx8mn-evk: switch to use binman
> >>> doc: imx8mn_evk: update doc after using binman
> >>> imx8mp-evk: switch to use binman
> >>> doc: imx8mp-evk: update after using binman
> >>>
> >>> Sherry Sun (1):
> >>> imx8mp: ddr: Add inline ECC feature support
> >>>
> >>> Utkarsh Gupta (2):
> >>> imx: HAB: Validate IVT before authenticating image
> >>> imx: hab: Display All HAB events via hab_status command
> >>>
> >>> Ye Li (18):
> >>> imx8mm_evk: Update to latest LPDDR4 script
> >>> imx8mm_evk: Switch to new imx8mm evk board
> >>> imx8mp_evk: Update LPDDR4 timing for new FW 202006
> >>> imx8mp_evk: Update LPDDR4 refresh time
> >>> imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
> >>> imx8mn: Add support for 11x11 UltraLite part number
> >>> imx8m: Update thermal and PMU kernel nodes for dual/single
> cores
> >>> imx8m: ddr: Disable CA VREF Training for LPDDR4
> >>> iMX8MQ: Recognize the B2 revision
> >>> misc: ocotp: Update OCOTP driver for iMX8MQ B2
> >>> imx8mq_evk: Applying default LPDDR4 script for B2
> >>> imx: hab: Add function to authenticate kernel image
> >>> hab: Change calling to ROM API failsafe
> >>> imx: HAB: Add support for iMX8MM
> >>> iMX8M: Add support to enable CONFIG_IMX_HAB
> >>> imx: cmd_dek: Enable DEK only for chips supporting CAAM
> >>> crypto: caam: Add fsl caam driver
> >>> crypto: fsl: refactor for 32 bit version CAAM support on ARM64
> >>>
> >>> haidong.zheng (1):
> >>> imx8mp: refine power on imx8mp board
> >>>
> >>> arch/arm/Kconfig | 6 +
> >>> arch/arm/dts/Makefile | 1 +
> >>> arch/arm/dts/imx8mm-evk-u-boot.dtsi | 117 ++++++++-
> >>> arch/arm/dts/imx8mm-evk.dtsi | 127 +++++-----
> >>> arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 115 +++++++++
> >>> arch/arm/dts/imx8mn-evk-u-boot.dtsi | 128 ++++++++++
> >>> arch/arm/dts/imx8mn-evk.dts | 128 ++++++++++
> >>> arch/arm/dts/imx8mp-evk-u-boot.dtsi | 112 +++++++++
> >>> arch/arm/include/asm/arch-imx/cpu.h | 13 +-
> >>> arch/arm/include/asm/arch-imx8/image.h | 11 +
> >>> arch/arm/include/asm/arch-imx8m/clock.h | 1 +
> >>> arch/arm/include/asm/arch-imx8m/imx-regs.h | 21 ++
> >>> arch/arm/include/asm/arch-mx7/crm_regs.h | 8 +
> >>> arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 12 +
> >>> arch/arm/include/asm/mach-imx/hab.h | 37 ++-
> >>> arch/arm/include/asm/mach-imx/sys_proto.h | 6 +-
> >>> arch/arm/mach-imx/Kconfig | 44 +++-
> >>> arch/arm/mach-imx/Makefile | 3 +
> >>> arch/arm/mach-imx/cmd_dek.c | 262
> ++++++++++++++++++--
> >>> arch/arm/mach-imx/cmd_mfgprot.c | 150
> ++++++++++++
> >>> arch/arm/mach-imx/cpu.c | 8 +-
> >>> arch/arm/mach-imx/hab.c | 417
> ++++++++++++++++++++++++++++----
> >>> arch/arm/mach-imx/imx8/Kconfig | 1 +
> >>> arch/arm/mach-imx/imx8m/Kconfig | 11 +
> >>> arch/arm/mach-imx/imx8m/clock_imx8mm.c | 8 +
> >>> arch/arm/mach-imx/imx8m/clock_imx8mq.c | 7 +
> >>> arch/arm/mach-imx/imx8m/soc.c | 183
> ++++++++++++--
> >>> arch/arm/mach-imx/mx7ulp/Kconfig | 1 +
> >>> arch/arm/mach-imx/priblob.c | 33 +++
> >>> board/freescale/imx8mm_evk/boot.cmd | 35 ---
> >>> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg | 9 +
> >>> board/freescale/imx8mm_evk/lpddr4_timing.c | 692
> +++++++++++++++++++++-------------------------------
> >>> board/freescale/imx8mm_evk/spl.c | 33 +--
> >>> board/freescale/imx8mn_evk/Kconfig | 6 +-
> >>> board/freescale/imx8mn_evk/Makefile | 6 +
> >>> board/freescale/imx8mn_evk/ddr4_timing.c | 1057
> ++++++++++++++++++++++++++++++++++----------------------------------------------
>
> >>> board/freescale/imx8mn_evk/ddr4_timing_ld.c | 1057
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> >>> board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg | 10 +
> >>> board/freescale/imx8mn_evk/lpddr4_timing.c | 1587
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> >>> board/freescale/imx8mn_evk/lpddr4_timing_ld.c | 1440
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> >>> board/freescale/imx8mn_evk/spl.c | 50 +++-
> >>> board/freescale/imx8mp_evk/boot.cmd | 25 --
> >>> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg | 10 +
> >>> board/freescale/imx8mp_evk/lpddr4_timing.c | 372
> +++++++++++++++++++++-------
> >>> board/freescale/imx8mp_evk/spl.c | 38 +--
> >>> board/freescale/imx8mq_evk/spl.c | 2 +-
> >>> board/phytec/phycore_imx8mp/spl.c | 2 +-
> >>> cmd/Kconfig | 8 +
> >>> cmd/Makefile | 1 +
> >>> cmd/blob.c | 16 ++
> >>> cmd/cmd_fsl_caam.c | 88 +++++++
> >>> configs/imx8mm_evk_defconfig | 6 +-
> >>> configs/imx8mn_ddr4_evk_defconfig | 4 +-
> >>> configs/imx8mn_evk_defconfig | 93 +++++++
> >>> configs/imx8mp_evk_defconfig | 4 +-
> >>> doc/board/freescale/imx8mm_evk.rst | 3 +-
> >>> doc/board/freescale/imx8mn_evk.rst | 3 +-
> >>> doc/board/freescale/imx8mp_evk.rst | 11 +-
> >>> doc/imx/habv4/guides/mx6_mx7_secure_boot.txt | 25 ++
> >>> drivers/crypto/Makefile | 1 +
> >>> drivers/crypto/fsl/Kconfig | 6 +
> >>> drivers/crypto/fsl/Makefile | 4 +-
> >>> drivers/crypto/fsl/desc.h | 49 ++--
> >>> drivers/crypto/fsl/desc_constr.h | 28 +--
> >>> drivers/crypto/fsl/fsl_blob.c | 6 +
> >>> drivers/crypto/fsl/fsl_hash.c | 6 +-
> >>> drivers/crypto/fsl/fsl_mfgprot.c | 160
> ++++++++++++
> >>> drivers/crypto/fsl/jobdesc.c | 16 +-
> >>> drivers/crypto/fsl/jr.c | 53 ++--
> >>> drivers/crypto/fsl/jr.h | 11 +-
> >>> drivers/crypto/fsl/type.h | 16 ++
> >>> drivers/crypto/fsl_caam.c | 720
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >>> drivers/crypto/fsl_caam_internal.h | 230
> ++++++++++++++++++
> >>> drivers/ddr/imx/imx8m/Kconfig | 8 +
> >>> drivers/misc/mxc_ocotp.c | 2 +-
> >>> drivers/power/pmic/pmic_pca9450.c | 4 +-
> >>> include/configs/imx8mm_evk.h | 8 +-
> >>> include/configs/imx8mp_evk.h | 8 +-
> >>> include/fsl_caam.h | 24 ++
> >>> include/fsl_sec.h | 54 +++--
> >>> include/power/pca9450.h | 2 +-
> >>> tools/imx8image.c | 2 +-
> >>> tools/imx8mimage.c | 2 +-
> >>> tools/logos/freescale.bmp | Bin 46738
> -> 47670 bytes
> >>> 84 files changed, 8600 insertions(+), 1484 deletions(-)
> >>> create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
> >>> create mode 100644 arch/arm/dts/imx8mn-evk.dts
> >>> create mode 100644 arch/arm/mach-imx/cmd_mfgprot.c
> >>> create mode 100644 arch/arm/mach-imx/priblob.c
> >>> delete mode 100644 board/freescale/imx8mm_evk/boot.cmd
> >>> create mode 100644
> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg
> >>> create mode 100644 board/freescale/imx8mn_evk/ddr4_timing_ld.c
> >>> create mode 100644 board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg
> >>> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
> >>> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing_ld.c
> >>> delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
> >>> create mode 100644
> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg
> >>> mode change 100644 => 100755
> board/freescale/imx8mp_evk/lpddr4_timing.c
> >>> create mode 100644 cmd/cmd_fsl_caam.c
> >>> create mode 100644 configs/imx8mn_evk_defconfig
> >>> create mode 100644 drivers/crypto/fsl/fsl_mfgprot.c
> >>> create mode 100644 drivers/crypto/fsl/type.h
> >>> create mode 100644 drivers/crypto/fsl_caam.c
> >>> create mode 100644 drivers/crypto/fsl_caam_internal.h
> >>> create mode 100644 include/fsl_caam.h
> >>>
> >
> >
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [NXP-IMX] please pull nxp-imx-2021-4-6
2021-05-27 15:40 ` Stefano Babic
@ 2021-05-27 15:42 ` Sean Anderson
0 siblings, 0 replies; 10+ messages in thread
From: Sean Anderson @ 2021-05-27 15:42 UTC (permalink / raw)
To: Stefano Babic, Frieder Schrempf, Peng Fan (OSS), Fabio Estevam; +Cc: u-boot
On 5/27/21 11:40 AM, Stefano Babic wrote:
> Hi Sean,
>
> On 27.05.21 17:27, Sean Anderson wrote:
>>
>>
>> On 5/27/21 10:59 AM, Stefano Babic wrote:
>> > Hi Frieder,
>> >
>> > On 27.05.21 16:47, Frieder Schrempf wrote:
>> >> Hi,
>> >>
>> >> On 06.04.21 11:34, Peng Fan (OSS) wrote:
>> >>> Hi Stefano,
>> >>>
>> >>> Please pull nxp-imx-2021-4-6. This PR is based on Tom's master branch. If you need
>> >>> me rebase on imx/master, I could redo this PR. This is quite a large PR, since lots
>> >>> stuff in downstream tree.
>> >>>
>> >>> I ran local buildman test for all boards, no issue found.
>> >>> ------------------------------------------
>> >>> convert to use binman for i.MX8MN/M/P EVK board
>> >>
>> >> It looks like these patches haven't been sent to the list. Is this common practice to have patches pulled via PR that were not sent to the list before?
>> >
>> > Never. Patches *MUST* be sent to the ML. I am sorry if some patches were pulled by me and they were not in the ML: it is then a mistake. Anyway, my work-flow foresees to get patches from patchworks and update the status after merging, and it is weird if some patches were not posted.
>> >
>> > For the patches reported here, they were posted and you get at:
>> >
>> > http://patchwork.ozlabs.org/project/uboot/list/?series=235820&state=*
>>
>> But none of the feedback was addressed. Ex:
>>
>> https://lore.kernel.org/u-boot/c8f2512d-d35a-748c-1c00-190849ffa525@nxp.com/
>> https://lore.kernel.org/u-boot/ce3f1e35-d215-6ace-4f38-1b36fc6abfa9@denx.de/
>
> And in fact, the related patches are not applied - or do you see the opposite ? There is not a second fsl CAAM driver...
Ah, looks like there was a second PR which never got merged. I was confused because Frieder commented on the first one.
--Sean
>
> Again, I am sorry if something was picked up without fixing the comments - but this should not be the case.
>
>>
>> This last one is even your own feedback, but here is the patch anyway.
>
> Agree with you, and again, raise your hand as soon as you find that something slip away and was merged. For i.MX, I will revert before asking Tom to merge my tree.
>
>> I
>> don't understand why there is a PR without addressing why we are adding
>> a second caam driver, which was brought up by two people.
>
> PR was sent by Peng, but then it is my responsibility as i.MX maintainer to take it at whole or drop the patches (if orthogonal, as in this case) that have open comments. And of course, you're right and comments should be worked (or at least discussed) before merging into main tree.
>
> Best regards,
> Stefano
>
>>
>> --Sean
>>
>> >
>> > but again, if some patches were merged without beeing posted, it was just a big mistake. It should not happen !
>> >
>> >> To me it feels wrong as there is no chance they will ever get reviewed/tested before merging,
>> >
>> > You're right, and patches must be posted without exceptions.
>> >
>> >> but I don't know the rules.
>> >
>> > Your feeling is correct.
>> >
>> >>
>> >> @Peng: Since using binman to build the images there is the following output:
>> >>
>> >> WARNING 'mkimage.flash.mkimage' not found, resulting binary is not-functional
>> >> make[2]: Nothing to be done for 'SPL'.
>> >>
>> >> Why is it there? How to get rid of it?
>> >>
>> >
>> > Best regards,
>> > Stefano
>> >
>> >> Thanks
>> >> Frieder
>> >>
>> >>> i.MX8M caam/dek support
>> >>> hab update/fix for i.MX8M/7ULP
>> >>> env/distro cleanup for i.MX8M
>> >>> i.MX8M ddr script/driver update
>> >>> ------------------------------------------
>> >>>
>> >>> Thanks,
>> >>> Peng.
>> >>>
>> >>> The following changes since commit 90eba245a66aa20589404ba537215faf2012c1a3:
>> >>>
>> >>> Merge branch 'next' (2021-04-05 11:29:57 -0400)
>> >>>
>> >>> are available in the Git repository at:
>> >>>
>> >>> https://eur04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2FMrVan%2Fu-boot.git&data=04%7C01%7Cfrieder.schrempf%40kontron.de%7C2ed49d663d694871619d08d8f8df37e6%7C8c9d3c973fd941c8a2b1646f3942daf1%7C0%7C0%7C637532984941310093%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=QEMqCBw9qvbdQfELx%2BpMAMTjw5Z7kgpo5G%2FzwTaLULY%3D&reserved=0 tags/nxp-imx-2021-4-6
>> >>>
>> >>> for you to fetch changes up to 95dfcc086b419aece6835fd7aaad704de661e246:
>> >>>
>> >>> doc: imx8mp-evk: update after using binman (2021-04-06 17:19:45 +0800)
>> >>>
>> >>> ----------------------------------------------------------------
>> >>> Aymen Sghaier (6):
>> >>> crypto: caam: Add CAAM support to i.MX8M platforms
>> >>> crypto: caam: Fix build warnings pointer casting
>> >>> crypto: Add blob command support for i.MX8M platforms
>> >>> crypto: caam: Fix pointer size to 32bit for i.MX8M
>> >>> crypto: caam: Add secure memory vid 3 support
>> >>> crypto: caam: RNG4 TRNG errata
>> >>>
>> >>> Breno Lima (13):
>> >>> imx: imx7 Support for Manufacturing Protection
>> >>> imx: Avoid hardcoded output ring size register offset (ORSR)
>> >>> imx: Ensure CAAM clock is enabled prior getting out_jr_size
>> >>> imx: Avoid hardcoded Job Ring Max size
>> >>> imx: hab: Enable hab.c to authenticate additional images in open configuration
>> >>> imx: hab: Check if IVT header is HABv4
>> >>> mx7ulp: hab: Add hab_status command for HABv4 M4 boot
>> >>> imx: hab: Fix build warnings in 32-bit targets
>> >>> crypto: fsl: blob: Flush dcache range for destination address
>> >>> mx6dq: hab: Fix chip version in hab.h code
>> >>> cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
>> >>> cmd: blob: Instantiate RNG before running CMD_BLOB
>> >>> fsl_mfgprot: Fix typo in sign_mppubk()
>> >>>
>> >>> Clement Faure (2):
>> >>> imx8m: Add DEK blob encapsulation for imx8m
>> >>> imx8: Add DEK blob encapsulation
>> >>>
>> >>> Clement Le Marquis (1):
>> >>> imx: caam: new u-boot command to set PRIBLOB bitfield from CAAM SCFGR register to 0x3
>> >>>
>> >>> Franck LENORMAND (3):
>> >>> crypto: caam: change JR running loop
>> >>> caam: enable support for iMX7ULP
>> >>> imx7ulp: Enable support for cmd blob
>> >>>
>> >>> Jacky Bai (1):
>> >>> imx8mn: Update the DDR4 timing script on imx8mn ddr4 evk
>> >>>
>> >>> Peng Fan (21):
>> >>> tools: imx image: fix write warning
>> >>> imx8mm/p: remove boot.cmd
>> >>> imx8mm_evk: add/cleanup variable for distro
>> >>> imx8mp_evk: add/cleanup variable for distro
>> >>> imx8mp_evk: spl: clean up including headers
>> >>> imx8mp_evk: Increase VDD_ARM to 0.95v Overdrive voltage
>> >>> power: pca9450: add a new parameter for power_pca9450_init
>> >>> imx8mn_evk: drop duplicated code
>> >>> imx8mn: Add LPDDR4 EVK board support
>> >>> imx: logos: use NXP logo
>> >>> imx8m: soc: update fuse path
>> >>> arch: mach-imx: imx8m: fix unique_id read error for imx8mp
>> >>> imx: HAB: Update hab codes to support ARM64 and i.MX8M
>> >>> imx8m: add regs used by CAAM
>> >>> imx8mm_evk: switch to use binman to pack images
>> >>> doc: imx8mm_evk: update doc after using binman
>> >>> imx8mn-ddr4-evk: switch to use binman
>> >>> imx8mn-evk: switch to use binman
>> >>> doc: imx8mn_evk: update doc after using binman
>> >>> imx8mp-evk: switch to use binman
>> >>> doc: imx8mp-evk: update after using binman
>> >>>
>> >>> Sherry Sun (1):
>> >>> imx8mp: ddr: Add inline ECC feature support
>> >>>
>> >>> Utkarsh Gupta (2):
>> >>> imx: HAB: Validate IVT before authenticating image
>> >>> imx: hab: Display All HAB events via hab_status command
>> >>>
>> >>> Ye Li (18):
>> >>> imx8mm_evk: Update to latest LPDDR4 script
>> >>> imx8mm_evk: Switch to new imx8mm evk board
>> >>> imx8mp_evk: Update LPDDR4 timing for new FW 202006
>> >>> imx8mp_evk: Update LPDDR4 refresh time
>> >>> imx8mn: Add low drive mode support for DDR4/LPDDR4 EVK
>> >>> imx8mn: Add support for 11x11 UltraLite part number
>> >>> imx8m: Update thermal and PMU kernel nodes for dual/single cores
>> >>> imx8m: ddr: Disable CA VREF Training for LPDDR4
>> >>> iMX8MQ: Recognize the B2 revision
>> >>> misc: ocotp: Update OCOTP driver for iMX8MQ B2
>> >>> imx8mq_evk: Applying default LPDDR4 script for B2
>> >>> imx: hab: Add function to authenticate kernel image
>> >>> hab: Change calling to ROM API failsafe
>> >>> imx: HAB: Add support for iMX8MM
>> >>> iMX8M: Add support to enable CONFIG_IMX_HAB
>> >>> imx: cmd_dek: Enable DEK only for chips supporting CAAM
>> >>> crypto: caam: Add fsl caam driver
>> >>> crypto: fsl: refactor for 32 bit version CAAM support on ARM64
>> >>>
>> >>> haidong.zheng (1):
>> >>> imx8mp: refine power on imx8mp board
>> >>>
>> >>> arch/arm/Kconfig | 6 +
>> >>> arch/arm/dts/Makefile | 1 +
>> >>> arch/arm/dts/imx8mm-evk-u-boot.dtsi | 117 ++++++++-
>> >>> arch/arm/dts/imx8mm-evk.dtsi | 127 +++++-----
>> >>> arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 115 +++++++++
>> >>> arch/arm/dts/imx8mn-evk-u-boot.dtsi | 128 ++++++++++
>> >>> arch/arm/dts/imx8mn-evk.dts | 128 ++++++++++
>> >>> arch/arm/dts/imx8mp-evk-u-boot.dtsi | 112 +++++++++
>> >>> arch/arm/include/asm/arch-imx/cpu.h | 13 +-
>> >>> arch/arm/include/asm/arch-imx8/image.h | 11 +
>> >>> arch/arm/include/asm/arch-imx8m/clock.h | 1 +
>> >>> arch/arm/include/asm/arch-imx8m/imx-regs.h | 21 ++
>> >>> arch/arm/include/asm/arch-mx7/crm_regs.h | 8 +
>> >>> arch/arm/include/asm/arch-mx7ulp/imx-regs.h | 12 +
>> >>> arch/arm/include/asm/mach-imx/hab.h | 37 ++-
>> >>> arch/arm/include/asm/mach-imx/sys_proto.h | 6 +-
>> >>> arch/arm/mach-imx/Kconfig | 44 +++-
>> >>> arch/arm/mach-imx/Makefile | 3 +
>> >>> arch/arm/mach-imx/cmd_dek.c | 262 ++++++++++++++++++--
>> >>> arch/arm/mach-imx/cmd_mfgprot.c | 150 ++++++++++++
>> >>> arch/arm/mach-imx/cpu.c | 8 +-
>> >>> arch/arm/mach-imx/hab.c | 417 ++++++++++++++++++++++++++++----
>> >>> arch/arm/mach-imx/imx8/Kconfig | 1 +
>> >>> arch/arm/mach-imx/imx8m/Kconfig | 11 +
>> >>> arch/arm/mach-imx/imx8m/clock_imx8mm.c | 8 +
>> >>> arch/arm/mach-imx/imx8m/clock_imx8mq.c | 7 +
>> >>> arch/arm/mach-imx/imx8m/soc.c | 183 ++++++++++++--
>> >>> arch/arm/mach-imx/mx7ulp/Kconfig | 1 +
>> >>> arch/arm/mach-imx/priblob.c | 33 +++
>> >>> board/freescale/imx8mm_evk/boot.cmd | 35 ---
>> >>> board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg | 9 +
>> >>> board/freescale/imx8mm_evk/lpddr4_timing.c | 692 +++++++++++++++++++++-------------------------------
>> >>> board/freescale/imx8mm_evk/spl.c | 33 +--
>> >>> board/freescale/imx8mn_evk/Kconfig | 6 +-
>> >>> board/freescale/imx8mn_evk/Makefile | 6 +
>> >>> board/freescale/imx8mn_evk/ddr4_timing.c | 1057 ++++++++++++++++++++++++++++++++++----------------------------------------------
>> >>> board/freescale/imx8mn_evk/ddr4_timing_ld.c | 1057 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >>> board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg | 10 +
>> >>> board/freescale/imx8mn_evk/lpddr4_timing.c | 1587 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >>> board/freescale/imx8mn_evk/lpddr4_timing_ld.c | 1440 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >>> board/freescale/imx8mn_evk/spl.c | 50 +++-
>> >>> board/freescale/imx8mp_evk/boot.cmd | 25 --
>> >>> board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg | 10 +
>> >>> board/freescale/imx8mp_evk/lpddr4_timing.c | 372 +++++++++++++++++++++-------
>> >>> board/freescale/imx8mp_evk/spl.c | 38 +--
>> >>> board/freescale/imx8mq_evk/spl.c | 2 +-
>> >>> board/phytec/phycore_imx8mp/spl.c | 2 +-
>> >>> cmd/Kconfig | 8 +
>> >>> cmd/Makefile | 1 +
>> >>> cmd/blob.c | 16 ++
>> >>> cmd/cmd_fsl_caam.c | 88 +++++++
>> >>> configs/imx8mm_evk_defconfig | 6 +-
>> >>> configs/imx8mn_ddr4_evk_defconfig | 4 +-
>> >>> configs/imx8mn_evk_defconfig | 93 +++++++
>> >>> configs/imx8mp_evk_defconfig | 4 +-
>> >>> doc/board/freescale/imx8mm_evk.rst | 3 +-
>> >>> doc/board/freescale/imx8mn_evk.rst | 3 +-
>> >>> doc/board/freescale/imx8mp_evk.rst | 11 +-
>> >>> doc/imx/habv4/guides/mx6_mx7_secure_boot.txt | 25 ++
>> >>> drivers/crypto/Makefile | 1 +
>> >>> drivers/crypto/fsl/Kconfig | 6 +
>> >>> drivers/crypto/fsl/Makefile | 4 +-
>> >>> drivers/crypto/fsl/desc.h | 49 ++--
>> >>> drivers/crypto/fsl/desc_constr.h | 28 +--
>> >>> drivers/crypto/fsl/fsl_blob.c | 6 +
>> >>> drivers/crypto/fsl/fsl_hash.c | 6 +-
>> >>> drivers/crypto/fsl/fsl_mfgprot.c | 160 ++++++++++++
>> >>> drivers/crypto/fsl/jobdesc.c | 16 +-
>> >>> drivers/crypto/fsl/jr.c | 53 ++--
>> >>> drivers/crypto/fsl/jr.h | 11 +-
>> >>> drivers/crypto/fsl/type.h | 16 ++
>> >>> drivers/crypto/fsl_caam.c | 720 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> >>> drivers/crypto/fsl_caam_internal.h | 230 ++++++++++++++++++
>> >>> drivers/ddr/imx/imx8m/Kconfig | 8 +
>> >>> drivers/misc/mxc_ocotp.c | 2 +-
>> >>> drivers/power/pmic/pmic_pca9450.c | 4 +-
>> >>> include/configs/imx8mm_evk.h | 8 +-
>> >>> include/configs/imx8mp_evk.h | 8 +-
>> >>> include/fsl_caam.h | 24 ++
>> >>> include/fsl_sec.h | 54 +++--
>> >>> include/power/pca9450.h | 2 +-
>> >>> tools/imx8image.c | 2 +-
>> >>> tools/imx8mimage.c | 2 +-
>> >>> tools/logos/freescale.bmp | Bin 46738 -> 47670 bytes
>> >>> 84 files changed, 8600 insertions(+), 1484 deletions(-)
>> >>> create mode 100644 arch/arm/dts/imx8mn-evk-u-boot.dtsi
>> >>> create mode 100644 arch/arm/dts/imx8mn-evk.dts
>> >>> create mode 100644 arch/arm/mach-imx/cmd_mfgprot.c
>> >>> create mode 100644 arch/arm/mach-imx/priblob.c
>> >>> delete mode 100644 board/freescale/imx8mm_evk/boot.cmd
>> >>> create mode 100644 board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg
>> >>> create mode 100644 board/freescale/imx8mn_evk/ddr4_timing_ld.c
>> >>> create mode 100644 board/freescale/imx8mn_evk/imximage-8mn-ddr4.cfg
>> >>> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing.c
>> >>> create mode 100644 board/freescale/imx8mn_evk/lpddr4_timing_ld.c
>> >>> delete mode 100644 board/freescale/imx8mp_evk/boot.cmd
>> >>> create mode 100644 board/freescale/imx8mp_evk/imximage-8mp-lpddr4.cfg
>> >>> mode change 100644 => 100755 board/freescale/imx8mp_evk/lpddr4_timing.c
>> >>> create mode 100644 cmd/cmd_fsl_caam.c
>> >>> create mode 100644 configs/imx8mn_evk_defconfig
>> >>> create mode 100644 drivers/crypto/fsl/fsl_mfgprot.c
>> >>> create mode 100644 drivers/crypto/fsl/type.h
>> >>> create mode 100644 drivers/crypto/fsl_caam.c
>> >>> create mode 100644 drivers/crypto/fsl_caam_internal.h
>> >>> create mode 100644 include/fsl_caam.h
>> >>>
>> >
>> >
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2021-05-27 15:42 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-06 9:34 [NXP-IMX] please pull nxp-imx-2021-4-6 Peng Fan
2021-04-06 9:45 ` Stefano Babic
2021-04-08 1:21 ` Peng Fan
2021-04-07 5:27 ` Peng Fan
2021-05-27 14:47 ` Frieder Schrempf
2021-05-27 14:59 ` Stefano Babic
2021-05-27 15:09 ` Frieder Schrempf
2021-05-27 15:27 ` Sean Anderson
2021-05-27 15:40 ` Stefano Babic
2021-05-27 15:42 ` Sean Anderson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.