Bug 207877: ASMedia drive (174c:55aa) hangs in ioctl CDROM_DRIVE

All of lore.kernel.org
 help / color / mirror / Atom feed

* Bug 207877: ASMedia drive (174c:55aa) hangs in ioctl CDROM_DRIVE_STATUS when mounting a DVD
@ 2020-05-28  4:23 Zebediah Figura
  2020-05-28  7:54 ` Greg KH
  0 siblings, 1 reply; 8+ messages in thread
From: Zebediah Figura @ 2020-05-28  4:23 UTC (permalink / raw)
  To: usb-storage, linux-usb

Hello all,

I was asked to report this bug here. There's more details in the bug 
report, but it's been proposed that there's a deadlock between 
device_reset() in scsiglue.c and usb_stor_control_thread().

I haven't examined the code in detail, but is this plausible? 
Alternatively, is there something else clearer that the backtrace shows?

ἔρρωσθε,
Zebediah

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Bug 207877: ASMedia drive (174c:55aa) hangs in ioctl CDROM_DRIVE_STATUS when mounting a DVD
  2020-05-28  4:23 Bug 207877: ASMedia drive (174c:55aa) hangs in ioctl CDROM_DRIVE_STATUS when mounting a DVD Zebediah Figura
@ 2020-05-28  7:54 ` Greg KH
  2020-05-28 15:02   ` Zebediah Figura
  0 siblings, 1 reply; 8+ messages in thread
From: Greg KH @ 2020-05-28  7:54 UTC (permalink / raw)
  To: Zebediah Figura; +Cc: usb-storage, linux-usb

On Wed, May 27, 2020 at 11:23:13PM -0500, Zebediah Figura wrote:
> Hello all,
> 
> I was asked to report this bug here. There's more details in the bug report,
> but it's been proposed that there's a deadlock between device_reset() in
> scsiglue.c and usb_stor_control_thread().

What bug report where?  Can you provide a link and the details here in
the email?

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Bug 207877: ASMedia drive (174c:55aa) hangs in ioctl CDROM_DRIVE_STATUS when mounting a DVD
  2020-05-28  7:54 ` Greg KH
@ 2020-05-28 15:02   ` Zebediah Figura
  2020-05-28 16:04     ` Alan Stern
  0 siblings, 1 reply; 8+ messages in thread
From: Zebediah Figura @ 2020-05-28 15:02 UTC (permalink / raw)
  To: Greg KH; +Cc: usb-storage, linux-usb

On 5/28/20 2:54 AM, Greg KH wrote:
> On Wed, May 27, 2020 at 11:23:13PM -0500, Zebediah Figura wrote:
>> Hello all,
>>
>> I was asked to report this bug here. There's more details in the bug report,
>> but it's been proposed that there's a deadlock between device_reset() in
>> scsiglue.c and usb_stor_control_thread().
> 
> What bug report where?  Can you provide a link and the details here in
> the email?

Oops, meant to link it and forgot. Sorry about that.

https://bugzilla.kernel.org/show_bug.cgi?id=207877

> 
> thanks,
> 
> greg k-h
> 


^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Bug 207877: ASMedia drive (174c:55aa) hangs in ioctl CDROM_DRIVE_STATUS when mounting a DVD
  2020-05-28 15:02   ` Zebediah Figura
@ 2020-05-28 16:04     ` Alan Stern
  2020-05-28 16:21       ` Zebediah Figura
  0 siblings, 1 reply; 8+ messages in thread
From: Alan Stern @ 2020-05-28 16:04 UTC (permalink / raw)
  To: Zebediah Figura; +Cc: Greg KH, usb-storage, linux-usb

On Thu, May 28, 2020 at 10:02:07AM -0500, Zebediah Figura wrote:
> On 5/28/20 2:54 AM, Greg KH wrote:
> > On Wed, May 27, 2020 at 11:23:13PM -0500, Zebediah Figura wrote:
> > > Hello all,
> > > 
> > > I was asked to report this bug here. There's more details in the bug report,
> > > but it's been proposed that there's a deadlock between device_reset() in
> > > scsiglue.c and usb_stor_control_thread().
> > 
> > What bug report where?  Can you provide a link and the details here in
> > the email?
> 
> Oops, meant to link it and forgot. Sorry about that.
> 
> https://bugzilla.kernel.org/show_bug.cgi?id=207877

This doesn't look like a deadlock to me, at least, not a deadlock 
involving the device reset code.

Your next step should be to collect a usbmon trace showing what happens 
when the problem occurs.  See the instructions in 
Documentation/usb/usbmon.rst.

Alan Stern

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Bug 207877: ASMedia drive (174c:55aa) hangs in ioctl CDROM_DRIVE_STATUS when mounting a DVD
  2020-05-28 16:04     ` Alan Stern
@ 2020-05-28 16:21       ` Zebediah Figura
  2020-05-28 17:05         ` Alan Stern
  0 siblings, 1 reply; 8+ messages in thread
From: Zebediah Figura @ 2020-05-28 16:21 UTC (permalink / raw)
  To: Alan Stern; +Cc: Greg KH, usb-storage, linux-usb

On 5/28/20 11:04 AM, Alan Stern wrote:
> On Thu, May 28, 2020 at 10:02:07AM -0500, Zebediah Figura wrote:
>> On 5/28/20 2:54 AM, Greg KH wrote:
>>> On Wed, May 27, 2020 at 11:23:13PM -0500, Zebediah Figura wrote:
>>>> Hello all,
>>>>
>>>> I was asked to report this bug here. There's more details in the bug report,
>>>> but it's been proposed that there's a deadlock between device_reset() in
>>>> scsiglue.c and usb_stor_control_thread().
>>>
>>> What bug report where?  Can you provide a link and the details here in
>>> the email?
>>
>> Oops, meant to link it and forgot. Sorry about that.
>>
>> https://bugzilla.kernel.org/show_bug.cgi?id=207877
> 
> This doesn't look like a deadlock to me, at least, not a deadlock
> involving the device reset code.
> 
> Your next step should be to collect a usbmon trace showing what happens
> when the problem occurs.  See the instructions in
> Documentation/usb/usbmon.rst.

Thanks, I've attached a usbmon trace to the bug. It seems the kernel 
submits a bulk input transfer that never receives a response. I hope my 
drive isn't broken...

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Bug 207877: ASMedia drive (174c:55aa) hangs in ioctl CDROM_DRIVE_STATUS when mounting a DVD
  2020-05-28 16:21       ` Zebediah Figura
@ 2020-05-28 17:05         ` Alan Stern
  2020-05-28 19:27           ` Zebediah Figura
  0 siblings, 1 reply; 8+ messages in thread
From: Alan Stern @ 2020-05-28 17:05 UTC (permalink / raw)
  To: Zebediah Figura; +Cc: Greg KH, usb-storage, linux-usb

> Thanks, I've attached a usbmon trace to the bug. It seems the kernel submits
> a bulk input transfer that never receives a response. I hope my drive isn't
> broken...

Did you wait for thirty seconds after that final bulk input transfer 
started?  It should have been aborted at that point, just like the two 
previous transfer attempts.  There might be a bad sector on the disc you 
were trying to read; all three attempts seem to have failed at the same 
place.

I get the impression that the SCSI error handler may have tried to reset 
the device without first aborting the current transfer.  But it's not 
easy to tell if that's what really happened.  You might be able to get 
more information by enabling CONFIG_USB_STORAGE_DEBUG and rebuilding the 
usb-storage driver, or by turning on SCSI debugging.

Alan Stern

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Bug 207877: ASMedia drive (174c:55aa) hangs in ioctl CDROM_DRIVE_STATUS when mounting a DVD
  2020-05-28 17:05         ` Alan Stern
@ 2020-05-28 19:27           ` Zebediah Figura
  2020-05-30  1:03             ` Alan Stern
  0 siblings, 1 reply; 8+ messages in thread
From: Zebediah Figura @ 2020-05-28 19:27 UTC (permalink / raw)
  To: Alan Stern; +Cc: Greg KH, usb-storage, linux-usb

On 5/28/20 12:05 PM, Alan Stern wrote:
>> Thanks, I've attached a usbmon trace to the bug. It seems the kernel submits
>> a bulk input transfer that never receives a response. I hope my drive isn't
>> broken...
> 
> Did you wait for thirty seconds after that final bulk input transfer
> started?  It should have been aborted at that point, just like the two
> previous transfer attempts.  There might be a bad sector on the disc you
> were trying to read; all three attempts seem to have failed at the same
> place.

Yes, in fact I waited for several minutes. The transfer seems never to 
have been aborted.

> I get the impression that the SCSI error handler may have tried to reset
> the device without first aborting the current transfer.  But it's not
> easy to tell if that's what really happened.  You might be able to get
> more information by enabling CONFIG_USB_STORAGE_DEBUG and rebuilding the
> usb-storage driver, or by turning on SCSI debugging.

I've attached a kernel log with CONFIG_USB_STORAGE_DEBUG to the bug 
report. I'm not able to properly interpret the results, but I do see 
"device_reset called" as the last USB/SCSI-related message without any 
nearby mention of cancellation...?

The backtrace looks different, though.

With respect to SCSI debugging, the best instructions I was able to find 
directed me to try:

hazel@watership:~$ cat /proc/scsi/sg/debug
max_active_device=2  def_reserved_size=32768

while the hang was taking place. If there's more useful debugging I can 
do, I'll need pointers. I did enable CONFIG_SCSI_LOGGING in the above build.

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: Bug 207877: ASMedia drive (174c:55aa) hangs in ioctl CDROM_DRIVE_STATUS when mounting a DVD
  2020-05-28 19:27           ` Zebediah Figura
@ 2020-05-30  1:03             ` Alan Stern
  0 siblings, 0 replies; 8+ messages in thread
From: Alan Stern @ 2020-05-30  1:03 UTC (permalink / raw)
  To: Zebediah Figura; +Cc: Greg KH, usb-storage, linux-usb, SCSI development list

On Thu, May 28, 2020 at 02:27:52PM -0500, Zebediah Figura wrote:
> On 5/28/20 12:05 PM, Alan Stern wrote:
> > I get the impression that the SCSI error handler may have tried to reset
> > the device without first aborting the current transfer.  But it's not
> > easy to tell if that's what really happened.  You might be able to get
> > more information by enabling CONFIG_USB_STORAGE_DEBUG and rebuilding the
> > usb-storage driver, or by turning on SCSI debugging.
> 
> I've attached a kernel log with CONFIG_USB_STORAGE_DEBUG to the bug report.
> I'm not able to properly interpret the results, but I do see "device_reset
> called" as the last USB/SCSI-related message without any nearby mention of
> cancellation...?
> 
> The backtrace looks different, though.

I don't think that matters.

> With respect to SCSI debugging, the best instructions I was able to find
> directed me to try:
> 
> hazel@watership:~$ cat /proc/scsi/sg/debug
> max_active_device=2  def_reserved_size=32768
> 
> while the hang was taking place. If there's more useful debugging I can do,
> I'll need pointers. I did enable CONFIG_SCSI_LOGGING in the above build.

Maybe someone from the linux-scsi mailing list will help.

Here is the problem we are facing, as shown in the following debugging 
log.  The log includes a sequence of six commands sent to a DVD drive.  
The first READ succeeds:

May 28 14:03:05 watership kernel: *** thread awakened
May 28 14:03:05 watership kernel: Command READ_10 (10 bytes)
May 28 14:03:05 watership kernel: bytes: 28 00 00 00 00 fa 00 00 06 00
May 28 14:03:05 watership kernel: Bulk Command S 0x43425355 T 0x222 L 12288 F 128 Trg 0 LUN 0 CL 10
May 28 14:03:05 watership kernel: xfer 31 bytes
May 28 14:03:05 watership kernel: Status code 0; transferred 31/31
May 28 14:03:05 watership kernel: -- transfer complete
May 28 14:03:05 watership kernel: Bulk command transfer result=0
May 28 14:03:05 watership kernel: xfer 12288 bytes, 1 entries
May 28 14:03:05 watership kernel: Status code 0; transferred 12288/12288
May 28 14:03:05 watership kernel: -- transfer complete
May 28 14:03:05 watership kernel: Bulk data transfer result 0x0
May 28 14:03:05 watership kernel: Attempting to get CSW...
May 28 14:03:05 watership kernel: xfer 13 bytes
May 28 14:03:05 watership kernel: Status code 0; transferred 13/13
May 28 14:03:05 watership kernel: -- transfer complete
May 28 14:03:05 watership kernel: Bulk status result = 0
May 28 14:03:05 watership kernel: Bulk Status S 0x53425355 T 0x222 R 0 Stat 0x0
May 28 14:03:05 watership kernel: scsi cmd done, result=0x0
May 28 14:03:05 watership kernel: *** thread sleeping

The second READ hangs for 30 seconds (reason unknown) and then gets 
aborted.  Following the abort, usb-storage automatically performs a 
reset:

May 28 14:03:05 watership kernel: *** thread awakened
May 28 14:03:05 watership kernel: Command READ_10 (10 bytes)
May 28 14:03:05 watership kernel: bytes: 28 00 00 3e 38 00 00 00 3c 00
May 28 14:03:05 watership kernel: Bulk Command S 0x43425355 T 0x223 L 122880 F 128 Trg 0 LUN 0 CL 10
May 28 14:03:05 watership kernel: xfer 31 bytes
May 28 14:03:05 watership kernel: Status code 0; transferred 31/31
May 28 14:03:05 watership kernel: -- transfer complete
May 28 14:03:05 watership kernel: Bulk command transfer result=0
May 28 14:03:05 watership kernel: xfer 122880 bytes, 15 entries
May 28 14:03:37 watership kernel: command_abort called
May 28 14:03:37 watership kernel: -- cancelling sg request
May 28 14:03:37 watership kernel: Status code -104; transferred 2048/122880
May 28 14:03:37 watership kernel: -- transfer cancelled
May 28 14:03:37 watership kernel: Bulk data transfer result 0x4
May 28 14:03:37 watership kernel: -- command was aborted
May 28 14:03:37 watership kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
May 28 14:03:37 watership kernel: usb_reset_device returns 0
May 28 14:03:37 watership kernel: scsi command aborted
May 28 14:03:37 watership kernel: *** thread sleeping
May 28 14:03:37 watership kernel: sr 1:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=31s
May 28 14:03:37 watership kernel: sr 1:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 3e 38 00 00 00 3c 00
May 28 14:03:37 watership kernel: blk_update_request: I/O error, dev sr0, sector 16310272 op 0x0:(READ) flags 0x80700 phys_seg 15 prio class 0

Next is a GET EVENT/STATUS NOTIFICATION...

May 28 14:03:37 watership kernel: *** thread awakened
May 28 14:03:37 watership kernel: Command GET EVENT/STATUS NOTIFICATION (10 bytes)
May 28 14:03:37 watership kernel: bytes: 4a 01 00 00 10 00 00 00 08 00
May 28 14:03:37 watership kernel: Bulk Command S 0x43425355 T 0x224 L 8 F 128 Trg 0 LUN 0 CL 10
May 28 14:03:37 watership kernel: xfer 31 bytes
May 28 14:03:37 watership kernel: Status code 0; transferred 31/31
May 28 14:03:37 watership kernel: -- transfer complete
May 28 14:03:37 watership kernel: Bulk command transfer result=0
May 28 14:03:37 watership kernel: xfer 8 bytes, 1 entries
May 28 14:03:37 watership kernel: Status code 0; transferred 8/8
May 28 14:03:37 watership kernel: -- transfer complete
May 28 14:03:37 watership kernel: Bulk data transfer result 0x0
May 28 14:03:37 watership kernel: Attempting to get CSW...
May 28 14:03:37 watership kernel: xfer 13 bytes
May 28 14:03:37 watership kernel: Status code 0; transferred 13/13
May 28 14:03:37 watership kernel: -- transfer complete
May 28 14:03:37 watership kernel: Bulk status result = 0
May 28 14:03:37 watership kernel: Bulk Status S 0x53425355 T 0x224 R 0 Stat 0x0
May 28 14:03:37 watership kernel: scsi cmd done, result=0x0
May 28 14:03:37 watership kernel: *** thread sleeping

... followed by a retry attempt of the previous READ, which hangs and is 
aborted again:

May 28 14:03:37 watership kernel: *** thread awakened
May 28 14:03:37 watership kernel: Command READ_10 (10 bytes)
May 28 14:03:37 watership kernel: bytes: 28 00 00 3e 38 00 00 00 02 00
May 28 14:03:37 watership kernel: Bulk Command S 0x43425355 T 0x225 L 4096 F 128 Trg 0 LUN 0 CL 10
May 28 14:03:37 watership kernel: xfer 31 bytes
May 28 14:03:37 watership kernel: Status code 0; transferred 31/31
May 28 14:03:37 watership kernel: -- transfer complete
May 28 14:03:37 watership kernel: Bulk command transfer result=0
May 28 14:03:37 watership kernel: xfer 4096 bytes, 1 entries
May 28 14:04:08 watership kernel: command_abort called
May 28 14:04:08 watership kernel: -- cancelling sg request
May 28 14:04:08 watership kernel: Status code -104; transferred 2048/4096
May 28 14:04:08 watership kernel: -- transfer cancelled
May 28 14:04:08 watership kernel: Bulk data transfer result 0x4
May 28 14:04:08 watership kernel: -- command was aborted
May 28 14:04:08 watership kernel: usb 1-5: reset high-speed USB device number 3 using xhci_hcd
May 28 14:04:08 watership kernel: usb_reset_device returns 0
May 28 14:04:08 watership kernel: scsi command aborted
May 28 14:04:08 watership kernel: *** thread sleeping

Then there's another successful GET EVENT/STATUS NOTIFICATION:

May 28 14:04:08 watership kernel: *** thread awakened
May 28 14:04:08 watership kernel: Command GET EVENT/STATUS NOTIFICATION (10 bytes)
May 28 14:04:08 watership kernel: bytes: 4a 01 00 00 10 00 00 00 08 00
May 28 14:04:08 watership kernel: Bulk Command S 0x43425355 T 0x226 L 8 F 128 Trg 0 LUN 0 CL 10
May 28 14:04:08 watership kernel: xfer 31 bytes
May 28 14:04:08 watership kernel: Status code 0; transferred 31/31
May 28 14:04:08 watership kernel: -- transfer complete
May 28 14:04:08 watership kernel: Bulk command transfer result=0
May 28 14:04:08 watership kernel: xfer 8 bytes, 1 entries
May 28 14:04:08 watership kernel: Status code 0; transferred 8/8
May 28 14:04:08 watership kernel: -- transfer complete
May 28 14:04:08 watership kernel: Bulk data transfer result 0x0
May 28 14:04:08 watership kernel: Attempting to get CSW...
May 28 14:04:08 watership kernel: xfer 13 bytes
May 28 14:04:08 watership kernel: Status code 0; transferred 13/13
May 28 14:04:08 watership kernel: -- transfer complete
May 28 14:04:08 watership kernel: Bulk status result = 0
May 28 14:04:08 watership kernel: Bulk Status S 0x53425355 T 0x226 R 0 Stat 0x0
May 28 14:04:08 watership kernel: scsi cmd done, result=0x0
May 28 14:04:08 watership kernel: *** thread sleeping

And a third attempt at the READ, which hangs as before:

May 28 14:04:08 watership kernel: *** thread awakened
May 28 14:04:08 watership kernel: Command READ_10 (10 bytes)
May 28 14:04:08 watership kernel: bytes: 28 00 00 3e 38 00 00 00 02 00
May 28 14:04:08 watership kernel: Bulk Command S 0x43425355 T 0x227 L 4096 F 128 Trg 0 LUN 0 CL 10
May 28 14:04:08 watership kernel: xfer 31 bytes
May 28 14:04:08 watership kernel: Status code 0; transferred 31/31
May 28 14:04:08 watership kernel: -- transfer complete
May 28 14:04:08 watership kernel: Bulk command transfer result=0
May 28 14:04:08 watership kernel: xfer 4096 bytes, 1 entries

But this time, instead of aborting the command, the SCSI core calls the 
device_reset routine.  This causes usb-storage to lock up; the reset 
can't proceed while the READ command is still executing:

May 28 14:04:38 watership kernel: device_reset called
May 28 14:06:48 watership kernel: INFO: task scsi_eh_1:240 blocked for more than 122 seconds.
May 28 14:06:48 watership kernel:       Not tainted 5.7.0-rc7local #4
May 28 14:06:48 watership kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 28 14:06:48 watership kernel: scsi_eh_1       D    0   240      2 0x80004000
May 28 14:06:48 watership kernel: Call Trace:
May 28 14:06:48 watership kernel:  __schedule+0x2a5/0x8c0
May 28 14:06:48 watership kernel:  schedule+0x46/0xf0
May 28 14:06:48 watership kernel:  schedule_preempt_disabled+0x14/0x20
May 28 14:06:48 watership kernel:  __mutex_lock.constprop.0+0x180/0x510
May 28 14:06:48 watership kernel:  device_reset+0x33/0x60 [usb_storage]
May 28 14:06:48 watership kernel:  scsi_eh_ready_devs+0x5f4/0xa40 [scsi_mod]
May 28 14:06:48 watership kernel:  ? _raw_spin_unlock_irqrestore+0x20/0x40
May 28 14:06:48 watership kernel:  ? __pm_runtime_resume+0x49/0x60
May 28 14:06:48 watership kernel:  scsi_error_handler+0x448/0x510 [scsi_mod]
May 28 14:06:48 watership kernel:  ? scsi_eh_get_sense+0x1f0/0x1f0 [scsi_mod]
May 28 14:06:48 watership kernel:  kthread+0x13e/0x160
May 28 14:06:48 watership kernel:  ? __kthread_bind_mask+0x60/0x60
May 28 14:06:48 watership kernel:  ret_from_fork+0x22/0x40
May 28 14:06:48 watership kernel: INFO: task usb-storage:242 blocked for more than 122 seconds.
May 28 14:06:48 watership kernel:       Not tainted 5.7.0-rc7local #4
May 28 14:06:48 watership kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 28 14:06:48 watership kernel: usb-storage     D    0   242      2 0x80004000
May 28 14:06:48 watership kernel: Call Trace:
May 28 14:06:48 watership kernel:  __schedule+0x2a5/0x8c0
May 28 14:06:48 watership kernel:  schedule+0x46/0xf0
May 28 14:06:48 watership kernel:  schedule_timeout+0x12d/0x170
May 28 14:06:48 watership kernel:  wait_for_completion+0x9e/0x100
May 28 14:06:48 watership kernel:  usb_sg_wait+0xc9/0x190
May 28 14:06:48 watership kernel:  usb_stor_bulk_transfer_sglist.part.0.constprop.0+0x7f/0x100 [usb_storage]
May 28 14:06:48 watership kernel:  ? fill_inquiry_response+0x10/0x10 [usb_storage]
May 28 14:06:48 watership kernel:  usb_stor_Bulk_transport+0x1f9/0x5b0 [usb_storage]
May 28 14:06:48 watership kernel:  ? fill_inquiry_response+0x10/0x10 [usb_storage]
May 28 14:06:48 watership kernel:  usb_stor_invoke_transport+0x59/0x6c0 [usb_storage]
May 28 14:06:48 watership kernel:  ? fill_inquiry_response+0x10/0x10 [usb_storage]
May 28 14:06:48 watership kernel:  usb_stor_control_thread+0x17d/0x390 [usb_storage]
May 28 14:06:48 watership kernel:  kthread+0x13e/0x160
May 28 14:06:48 watership kernel:  ? __kthread_bind_mask+0x60/0x60
May 28 14:06:48 watership kernel:  ret_from_fork+0x22/0x40

So here's the question: Why doesn't the SCSI error handler abort the 
ongoing command (like it did the first two times) before resetting the 
device?

Note: The kernel version is 5.7-rc7.

Alan Stern

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2020-05-30  1:03 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-28  4:23 Bug 207877: ASMedia drive (174c:55aa) hangs in ioctl CDROM_DRIVE_STATUS when mounting a DVD Zebediah Figura
2020-05-28  7:54 ` Greg KH
2020-05-28 15:02   ` Zebediah Figura
2020-05-28 16:04     ` Alan Stern
2020-05-28 16:21       ` Zebediah Figura
2020-05-28 17:05         ` Alan Stern
2020-05-28 19:27           ` Zebediah Figura
2020-05-30  1:03             ` Alan Stern

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.