[PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[grygorii.strashko]

From: Grygorii Strashko <grygorii.strashko@linaro.org>

While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
i've found that the most common problem I have to dial with is absence
of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
So, I've fixed one driver first
commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
but then found another one which need to be fixed too (omap_l3_noc.c).
At this moment I decided to make my life easier and added new macro
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
SET_SYSTEM_SLEEP_PM_OPS macro.

SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
->restore_noirq.

Further two patches reuse this newly introduced macro.

SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
    point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
    function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
    ->restore_noirq.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>

Grygorii Strashko (3):
  PM / Sleep: Add macro to define common noirq system PM callbacks
  bus: omap_l3_noc: add missed callbacks for suspend-to-disk
  ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS

 arch/arm/mach-omap2/omap_device.c |  7 ++-----
 drivers/bus/omap_l3_noc.c         |  4 ++--
 include/linux/pm.h                | 12 ++++++++++++
 3 files changed, 16 insertions(+), 7 deletions(-)

-- 
1.9.1

[PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[grygorii.strashko at linaro.org]

From: Grygorii Strashko <grygorii.strashko@linaro.org>

While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
i've found that the most common problem I have to dial with is absence
of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
So, I've fixed one driver first
commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
but then found another one which need to be fixed too (omap_l3_noc.c).
At this moment I decided to make my life easier and added new macro
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
SET_SYSTEM_SLEEP_PM_OPS macro.

SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
->restore_noirq.

Further two patches reuse this newly introduced macro.

SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
    point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
    function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
    ->restore_noirq.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>

Grygorii Strashko (3):
  PM / Sleep: Add macro to define common noirq system PM callbacks
  bus: omap_l3_noc: add missed callbacks for suspend-to-disk
  ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS

 arch/arm/mach-omap2/omap_device.c |  7 ++-----
 drivers/bus/omap_l3_noc.c         |  4 ++--
 include/linux/pm.h                | 12 ++++++++++++
 3 files changed, 16 insertions(+), 7 deletions(-)

-- 
1.9.1

[PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[grygorii.strashko]

From: Grygorii Strashko <grygorii.strashko@linaro.org>

While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
i've found that the most common problem I have to dial with is absence
of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
So, I've fixed one driver first
commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
but then found another one which need to be fixed too (omap_l3_noc.c).
At this moment I decided to make my life easier and added new macro
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
SET_SYSTEM_SLEEP_PM_OPS macro.

SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
->restore_noirq.

Further two patches reuse this newly introduced macro.

SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
    point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
    function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
    ->restore_noirq.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>

Grygorii Strashko (3):
  PM / Sleep: Add macro to define common noirq system PM callbacks
  bus: omap_l3_noc: add missed callbacks for suspend-to-disk
  ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS

 arch/arm/mach-omap2/omap_device.c |  7 ++-----
 drivers/bus/omap_l3_noc.c         |  4 ++--
 include/linux/pm.h                | 12 ++++++++++++
 3 files changed, 16 insertions(+), 7 deletions(-)

-- 
1.9.1

[PATCH 1/3] PM / Sleep: Add macro to define common noirq system PM callbacks

[grygorii.strashko]

From: Grygorii Strashko <Grygorii.Strashko@linaro.org>

The same approach is used as for the existing SET_SYSTEM_SLEEP_PM_OPS,
but for noirq callbacks.

New SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
->restore_noirq.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
---
 include/linux/pm.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/include/linux/pm.h b/include/linux/pm.h
index 2d29c64..4890743 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -342,6 +342,18 @@ struct dev_pm_ops {
 #define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+#define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+	.suspend_noirq = suspend_fn, \
+	.resume_noirq = resume_fn, \
+	.freeze_noirq = suspend_fn, \
+	.thaw_noirq = resume_fn, \
+	.poweroff_noirq = suspend_fn, \
+	.restore_noirq = resume_fn,
+#else
+#define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
+#endif
+
 #ifdef CONFIG_PM
 #define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
 	.runtime_suspend = suspend_fn, \
-- 
1.9.1

[PATCH 1/3] PM / Sleep: Add macro to define common noirq system PM callbacks

[grygorii.strashko at linaro.org]

From: Grygorii Strashko <Grygorii.Strashko@linaro.org>

The same approach is used as for the existing SET_SYSTEM_SLEEP_PM_OPS,
but for noirq callbacks.

New SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
->restore_noirq.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
---
 include/linux/pm.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/include/linux/pm.h b/include/linux/pm.h
index 2d29c64..4890743 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -342,6 +342,18 @@ struct dev_pm_ops {
 #define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+#define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+	.suspend_noirq = suspend_fn, \
+	.resume_noirq = resume_fn, \
+	.freeze_noirq = suspend_fn, \
+	.thaw_noirq = resume_fn, \
+	.poweroff_noirq = suspend_fn, \
+	.restore_noirq = resume_fn,
+#else
+#define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
+#endif
+
 #ifdef CONFIG_PM
 #define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
 	.runtime_suspend = suspend_fn, \
-- 
1.9.1

[PATCH 1/3] PM / Sleep: Add macro to define common noirq system PM callbacks

[grygorii.strashko]

From: Grygorii Strashko <Grygorii.Strashko@linaro.org>

The same approach is used as for the existing SET_SYSTEM_SLEEP_PM_OPS,
but for noirq callbacks.

New SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
->restore_noirq.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
---
 include/linux/pm.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/include/linux/pm.h b/include/linux/pm.h
index 2d29c64..4890743 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -342,6 +342,18 @@ struct dev_pm_ops {
 #define SET_LATE_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+#define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn) \
+	.suspend_noirq = suspend_fn, \
+	.resume_noirq = resume_fn, \
+	.freeze_noirq = suspend_fn, \
+	.thaw_noirq = resume_fn, \
+	.poweroff_noirq = suspend_fn, \
+	.restore_noirq = resume_fn,
+#else
+#define SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(suspend_fn, resume_fn)
+#endif
+
 #ifdef CONFIG_PM
 #define SET_RUNTIME_PM_OPS(suspend_fn, resume_fn, idle_fn) \
 	.runtime_suspend = suspend_fn, \
-- 
1.9.1

[PATCH 2/3] bus: omap_l3_noc: add missed callbacks for suspend-to-disk

[grygorii.strashko]

From: Grygorii Strashko <Grygorii.Strashko@linaro.org>

Add missed callbacks needed for proper supporting of suspend-to-disk
by using recently introduced macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
---
 drivers/bus/omap_l3_noc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 11f7982..6ae3884 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -300,7 +300,7 @@ static int omap_l3_probe(struct platform_device *pdev)
 	return ret;
 }
 
-#ifdef	CONFIG_PM
+#ifdef	CONFIG_PM_SLEEP
 
 /**
  * l3_resume_noirq() - resume function for l3_noc
@@ -346,7 +346,7 @@ static int l3_resume_noirq(struct device *dev)
 }
 
 static const struct dev_pm_ops l3_dev_pm_ops = {
-	.resume_noirq		= l3_resume_noirq,
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, l3_resume_noirq)
 };
 
 #define L3_DEV_PM_OPS (&l3_dev_pm_ops)
-- 
1.9.1

[PATCH 2/3] bus: omap_l3_noc: add missed callbacks for suspend-to-disk

[grygorii.strashko at linaro.org]

From: Grygorii Strashko <Grygorii.Strashko@linaro.org>

Add missed callbacks needed for proper supporting of suspend-to-disk
by using recently introduced macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
---
 drivers/bus/omap_l3_noc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 11f7982..6ae3884 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -300,7 +300,7 @@ static int omap_l3_probe(struct platform_device *pdev)
 	return ret;
 }
 
-#ifdef	CONFIG_PM
+#ifdef	CONFIG_PM_SLEEP
 
 /**
  * l3_resume_noirq() - resume function for l3_noc
@@ -346,7 +346,7 @@ static int l3_resume_noirq(struct device *dev)
 }
 
 static const struct dev_pm_ops l3_dev_pm_ops = {
-	.resume_noirq		= l3_resume_noirq,
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, l3_resume_noirq)
 };
 
 #define L3_DEV_PM_OPS (&l3_dev_pm_ops)
-- 
1.9.1

[PATCH 2/3] bus: omap_l3_noc: add missed callbacks for suspend-to-disk

[grygorii.strashko]

From: Grygorii Strashko <Grygorii.Strashko@linaro.org>

Add missed callbacks needed for proper supporting of suspend-to-disk
by using recently introduced macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
---
 drivers/bus/omap_l3_noc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 11f7982..6ae3884 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -300,7 +300,7 @@ static int omap_l3_probe(struct platform_device *pdev)
 	return ret;
 }
 
-#ifdef	CONFIG_PM
+#ifdef	CONFIG_PM_SLEEP
 
 /**
  * l3_resume_noirq() - resume function for l3_noc
@@ -346,7 +346,7 @@ static int l3_resume_noirq(struct device *dev)
 }
 
 static const struct dev_pm_ops l3_dev_pm_ops = {
-	.resume_noirq		= l3_resume_noirq,
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, l3_resume_noirq)
 };
 
 #define L3_DEV_PM_OPS (&l3_dev_pm_ops)
-- 
1.9.1

Re: [PATCH 2/3] bus: omap_l3_noc: add missed callbacks for suspend-to-disk

[Nishanth Menon]

On Mon, Apr 27, 2015 at 1:24 PM,  <grygorii.strashko@linaro.org> wrote:
> From: Grygorii Strashko <Grygorii.Strashko@linaro.org>
>
> Add missed callbacks needed for proper supporting of suspend-to-disk
> by using recently introduced macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.
>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>
> Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
> ---
>  drivers/bus/omap_l3_noc.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
> index 11f7982..6ae3884 100644
> --- a/drivers/bus/omap_l3_noc.c
> +++ b/drivers/bus/omap_l3_noc.c
> @@ -300,7 +300,7 @@ static int omap_l3_probe(struct platform_device *pdev)
>         return ret;
>  }
>
> -#ifdef CONFIG_PM
> +#ifdef CONFIG_PM_SLEEP
>
>  /**
>   * l3_resume_noirq() - resume function for l3_noc
> @@ -346,7 +346,7 @@ static int l3_resume_noirq(struct device *dev)
>  }
>
>  static const struct dev_pm_ops l3_dev_pm_ops = {
> -       .resume_noirq           = l3_resume_noirq,
> +       SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, l3_resume_noirq)
>  };
>
>  #define L3_DEV_PM_OPS (&l3_dev_pm_ops)
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Acked-by: Nishanth Menon <nm@ti.com>

-- 
---
Regards,
Nishanth Menon

[PATCH 2/3] bus: omap_l3_noc: add missed callbacks for suspend-to-disk

[Nishanth Menon]

On Mon, Apr 27, 2015 at 1:24 PM,  <grygorii.strashko@linaro.org> wrote:
> From: Grygorii Strashko <Grygorii.Strashko@linaro.org>
>
> Add missed callbacks needed for proper supporting of suspend-to-disk
> by using recently introduced macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.
>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>
> Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
> ---
>  drivers/bus/omap_l3_noc.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
> index 11f7982..6ae3884 100644
> --- a/drivers/bus/omap_l3_noc.c
> +++ b/drivers/bus/omap_l3_noc.c
> @@ -300,7 +300,7 @@ static int omap_l3_probe(struct platform_device *pdev)
>         return ret;
>  }
>
> -#ifdef CONFIG_PM
> +#ifdef CONFIG_PM_SLEEP
>
>  /**
>   * l3_resume_noirq() - resume function for l3_noc
> @@ -346,7 +346,7 @@ static int l3_resume_noirq(struct device *dev)
>  }
>
>  static const struct dev_pm_ops l3_dev_pm_ops = {
> -       .resume_noirq           = l3_resume_noirq,
> +       SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, l3_resume_noirq)
>  };
>
>  #define L3_DEV_PM_OPS (&l3_dev_pm_ops)
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Acked-by: Nishanth Menon <nm@ti.com>

-- 
---
Regards,
Nishanth Menon

Re: [PATCH 2/3] bus: omap_l3_noc: add missed callbacks for suspend-to-disk

[Nishanth Menon]

On Mon, Apr 27, 2015 at 1:24 PM,  <grygorii.strashko@linaro.org> wrote:
> From: Grygorii Strashko <Grygorii.Strashko@linaro.org>
>
> Add missed callbacks needed for proper supporting of suspend-to-disk
> by using recently introduced macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS.
>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>
> Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
> ---
>  drivers/bus/omap_l3_noc.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
> index 11f7982..6ae3884 100644
> --- a/drivers/bus/omap_l3_noc.c
> +++ b/drivers/bus/omap_l3_noc.c
> @@ -300,7 +300,7 @@ static int omap_l3_probe(struct platform_device *pdev)
>         return ret;
>  }
>
> -#ifdef CONFIG_PM
> +#ifdef CONFIG_PM_SLEEP
>
>  /**
>   * l3_resume_noirq() - resume function for l3_noc
> @@ -346,7 +346,7 @@ static int l3_resume_noirq(struct device *dev)
>  }
>
>  static const struct dev_pm_ops l3_dev_pm_ops = {
> -       .resume_noirq           = l3_resume_noirq,
> +       SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, l3_resume_noirq)
>  };
>
>  #define L3_DEV_PM_OPS (&l3_dev_pm_ops)
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Acked-by: Nishanth Menon <nm@ti.com>

-- 
---
Regards,
Nishanth Menon

[PATCH 3/3] ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS

[grygorii.strashko]

From: Grygorii Strashko <Grygorii.Strashko@linaro.org>

Use recently introduced macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS to
set up PM callbacks. This also fixes missed assignment of
.poweroff_noirq() callback.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
---
 arch/arm/mach-omap2/omap_device.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 166b18f..83a0f5a 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -688,11 +688,8 @@ struct dev_pm_domain omap_device_pm_domain = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
 				   NULL)
 		USE_PLATFORM_PM_SLEEP_OPS
-		.suspend_noirq = _od_suspend_noirq,
-		.resume_noirq = _od_resume_noirq,
-		.freeze_noirq = _od_suspend_noirq,
-		.thaw_noirq = _od_resume_noirq,
-		.restore_noirq = _od_resume_noirq,
+		SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq,
+					      _od_resume_noirq)
 	}
 };
 
-- 
1.9.1

[PATCH 3/3] ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS

[grygorii.strashko at linaro.org]

From: Grygorii Strashko <Grygorii.Strashko@linaro.org>

Use recently introduced macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS to
set up PM callbacks. This also fixes missed assignment of
.poweroff_noirq() callback.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
---
 arch/arm/mach-omap2/omap_device.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 166b18f..83a0f5a 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -688,11 +688,8 @@ struct dev_pm_domain omap_device_pm_domain = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
 				   NULL)
 		USE_PLATFORM_PM_SLEEP_OPS
-		.suspend_noirq = _od_suspend_noirq,
-		.resume_noirq = _od_resume_noirq,
-		.freeze_noirq = _od_suspend_noirq,
-		.thaw_noirq = _od_resume_noirq,
-		.restore_noirq = _od_resume_noirq,
+		SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq,
+					      _od_resume_noirq)
 	}
 };
 
-- 
1.9.1

[PATCH 3/3] ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS

[grygorii.strashko]

From: Grygorii Strashko <Grygorii.Strashko@linaro.org>

Use recently introduced macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS to
set up PM callbacks. This also fixes missed assignment of
.poweroff_noirq() callback.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
---
 arch/arm/mach-omap2/omap_device.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 166b18f..83a0f5a 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -688,11 +688,8 @@ struct dev_pm_domain omap_device_pm_domain = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
 				   NULL)
 		USE_PLATFORM_PM_SLEEP_OPS
-		.suspend_noirq = _od_suspend_noirq,
-		.resume_noirq = _od_resume_noirq,
-		.freeze_noirq = _od_suspend_noirq,
-		.thaw_noirq = _od_resume_noirq,
-		.restore_noirq = _od_resume_noirq,
+		SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq,
+					      _od_resume_noirq)
 	}
 };
 
-- 
1.9.1

Re: [PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[santosh shilimkar]

On 4/27/2015 11:24 AM, grygorii.strashko@linaro.org wrote:
> From: Grygorii Strashko <grygorii.strashko@linaro.org>
>
> While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> i've found that the most common problem I have to dial with is absence
> of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> So, I've fixed one driver first
> commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> but then found another one which need to be fixed too (omap_l3_noc.c).
> At this moment I decided to make my life easier and added new macro
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> SET_SYSTEM_SLEEP_PM_OPS macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> ->restore_noirq.
>
> Further two patches reuse this newly introduced macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
>      point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
>      function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
>      ->restore_noirq.
>
[...]

>
> Grygorii Strashko (3):
>    PM / Sleep: Add macro to define common noirq system PM callbacks
>    bus: omap_l3_noc: add missed callbacks for suspend-to-disk
>    ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
>
>   arch/arm/mach-omap2/omap_device.c |  7 ++-----
>   drivers/bus/omap_l3_noc.c         |  4 ++--
>   include/linux/pm.h                | 12 ++++++++++++
>   3 files changed, 16 insertions(+), 7 deletions(-)
>
Looks fine to me.....
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>

[PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[santosh shilimkar]

On 4/27/2015 11:24 AM, grygorii.strashko at linaro.org wrote:
> From: Grygorii Strashko <grygorii.strashko@linaro.org>
>
> While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> i've found that the most common problem I have to dial with is absence
> of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> So, I've fixed one driver first
> commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> but then found another one which need to be fixed too (omap_l3_noc.c).
> At this moment I decided to make my life easier and added new macro
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> SET_SYSTEM_SLEEP_PM_OPS macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> ->restore_noirq.
>
> Further two patches reuse this newly introduced macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
>      point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
>      function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
>      ->restore_noirq.
>
[...]

>
> Grygorii Strashko (3):
>    PM / Sleep: Add macro to define common noirq system PM callbacks
>    bus: omap_l3_noc: add missed callbacks for suspend-to-disk
>    ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
>
>   arch/arm/mach-omap2/omap_device.c |  7 ++-----
>   drivers/bus/omap_l3_noc.c         |  4 ++--
>   include/linux/pm.h                | 12 ++++++++++++
>   3 files changed, 16 insertions(+), 7 deletions(-)
>
Looks fine to me.....
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>

Re: [PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[Ulf Hansson]

On 27 April 2015 at 20:24,  <grygorii.strashko@linaro.org> wrote:
> From: Grygorii Strashko <grygorii.strashko@linaro.org>
>
> While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> i've found that the most common problem I have to dial with is absence
> of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> So, I've fixed one driver first
> commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> but then found another one which need to be fixed too (omap_l3_noc.c).
> At this moment I decided to make my life easier and added new macro
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> SET_SYSTEM_SLEEP_PM_OPS macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> ->restore_noirq.
>
> Further two patches reuse this newly introduced macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
>     point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
>     function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
>     ->restore_noirq.
>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>
>
> Grygorii Strashko (3):
>   PM / Sleep: Add macro to define common noirq system PM callbacks
>   bus: omap_l3_noc: add missed callbacks for suspend-to-disk
>   ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
>
>  arch/arm/mach-omap2/omap_device.c |  7 ++-----
>  drivers/bus/omap_l3_noc.c         |  4 ++--
>  include/linux/pm.h                | 12 ++++++++++++
>  3 files changed, 16 insertions(+), 7 deletions(-)
>
> --
> 1.9.1
>

For the patchset.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

[PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[Ulf Hansson]

On 27 April 2015 at 20:24,  <grygorii.strashko@linaro.org> wrote:
> From: Grygorii Strashko <grygorii.strashko@linaro.org>
>
> While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> i've found that the most common problem I have to dial with is absence
> of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> So, I've fixed one driver first
> commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> but then found another one which need to be fixed too (omap_l3_noc.c).
> At this moment I decided to make my life easier and added new macro
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> SET_SYSTEM_SLEEP_PM_OPS macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> ->restore_noirq.
>
> Further two patches reuse this newly introduced macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
>     point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
>     function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
>     ->restore_noirq.
>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>
>
> Grygorii Strashko (3):
>   PM / Sleep: Add macro to define common noirq system PM callbacks
>   bus: omap_l3_noc: add missed callbacks for suspend-to-disk
>   ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
>
>  arch/arm/mach-omap2/omap_device.c |  7 ++-----
>  drivers/bus/omap_l3_noc.c         |  4 ++--
>  include/linux/pm.h                | 12 ++++++++++++
>  3 files changed, 16 insertions(+), 7 deletions(-)
>
> --
> 1.9.1
>

For the patchset.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

Re: [PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[Ulf Hansson]

On 27 April 2015 at 20:24,  <grygorii.strashko@linaro.org> wrote:
> From: Grygorii Strashko <grygorii.strashko@linaro.org>
>
> While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> i've found that the most common problem I have to dial with is absence
> of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> So, I've fixed one driver first
> commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> but then found another one which need to be fixed too (omap_l3_noc.c).
> At this moment I decided to make my life easier and added new macro
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> SET_SYSTEM_SLEEP_PM_OPS macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> ->restore_noirq.
>
> Further two patches reuse this newly introduced macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
>     point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
>     function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
>     ->restore_noirq.
>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>
>
> Grygorii Strashko (3):
>   PM / Sleep: Add macro to define common noirq system PM callbacks
>   bus: omap_l3_noc: add missed callbacks for suspend-to-disk
>   ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
>
>  arch/arm/mach-omap2/omap_device.c |  7 ++-----
>  drivers/bus/omap_l3_noc.c         |  4 ++--
>  include/linux/pm.h                | 12 ++++++++++++
>  3 files changed, 16 insertions(+), 7 deletions(-)
>
> --
> 1.9.1
>

For the patchset.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Kind regards
Uffe

Re: [PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[Kevin Hilman]

<grygorii.strashko@linaro.org> writes:

> From: Grygorii Strashko <grygorii.strashko@linaro.org>
>
> While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> i've found that the most common problem I have to dial with is absence
> of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> So, I've fixed one driver first
> commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> but then found another one which need to be fixed too (omap_l3_noc.c).
> At this moment I decided to make my life easier and added new macro
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> SET_SYSTEM_SLEEP_PM_OPS macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> ->restore_noirq.
>
> Further two patches reuse this newly introduced macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
>     point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
>     function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
>     ->restore_noirq.

For the series:

Reviewed-by: Kevin Hilman <khilman@linaro.org>

And for the omap_device changes:

Acked-by: Kevin Hilman <khilman@linaro.org>

[PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[Kevin Hilman]

<grygorii.strashko@linaro.org> writes:

> From: Grygorii Strashko <grygorii.strashko@linaro.org>
>
> While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> i've found that the most common problem I have to dial with is absence
> of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> So, I've fixed one driver first
> commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> but then found another one which need to be fixed too (omap_l3_noc.c).
> At this moment I decided to make my life easier and added new macro
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> SET_SYSTEM_SLEEP_PM_OPS macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> ->restore_noirq.
>
> Further two patches reuse this newly introduced macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
>     point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
>     function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
>     ->restore_noirq.

For the series:

Reviewed-by: Kevin Hilman <khilman@linaro.org>

And for the omap_device changes:

Acked-by: Kevin Hilman <khilman@linaro.org>

Re: [PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[Kevin Hilman]

<grygorii.strashko@linaro.org> writes:

> From: Grygorii Strashko <grygorii.strashko@linaro.org>
>
> While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> i've found that the most common problem I have to dial with is absence
> of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> So, I've fixed one driver first
> commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> but then found another one which need to be fixed too (omap_l3_noc.c).
> At this moment I decided to make my life easier and added new macro
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> SET_SYSTEM_SLEEP_PM_OPS macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> ->restore_noirq.
>
> Further two patches reuse this newly introduced macro.
>
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
>     point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
>     function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
>     ->restore_noirq.

For the series:

Reviewed-by: Kevin Hilman <khilman@linaro.org>

And for the omap_device changes:

Acked-by: Kevin Hilman <khilman@linaro.org>

Re: [PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[Rafael J. Wysocki]

On Tuesday, April 28, 2015 08:40:04 AM Kevin Hilman wrote:
> <grygorii.strashko@linaro.org> writes:
> 
> > From: Grygorii Strashko <grygorii.strashko@linaro.org>
> >
> > While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> > i've found that the most common problem I have to dial with is absence
> > of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> > So, I've fixed one driver first
> > commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> > but then found another one which need to be fixed too (omap_l3_noc.c).
> > At this moment I decided to make my life easier and added new macro
> > SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> > SET_SYSTEM_SLEEP_PM_OPS macro.
> >
> > SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> > assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> > function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> > ->restore_noirq.
> >
> > Further two patches reuse this newly introduced macro.
> >
> > SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
> >     point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> >     function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> >     ->restore_noirq.
> 
> For the series:
> 
> Reviewed-by: Kevin Hilman <khilman@linaro.org>
> 
> And for the omap_device changes:
> 
> Acked-by: Kevin Hilman <khilman@linaro.org>

All three queued up for 4.2, thanks!


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

[PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[Rafael J. Wysocki]

On Tuesday, April 28, 2015 08:40:04 AM Kevin Hilman wrote:
> <grygorii.strashko@linaro.org> writes:
> 
> > From: Grygorii Strashko <grygorii.strashko@linaro.org>
> >
> > While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> > i've found that the most common problem I have to dial with is absence
> > of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> > So, I've fixed one driver first
> > commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> > but then found another one which need to be fixed too (omap_l3_noc.c).
> > At this moment I decided to make my life easier and added new macro
> > SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> > SET_SYSTEM_SLEEP_PM_OPS macro.
> >
> > SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> > assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> > function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> > ->restore_noirq.
> >
> > Further two patches reuse this newly introduced macro.
> >
> > SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
> >     point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> >     function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> >     ->restore_noirq.
> 
> For the series:
> 
> Reviewed-by: Kevin Hilman <khilman@linaro.org>
> 
> And for the omap_device changes:
> 
> Acked-by: Kevin Hilman <khilman@linaro.org>

All three queued up for 4.2, thanks!


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[Pavel Machek]

On Mon 2015-04-27 21:24:29, grygorii.strashko@linaro.org wrote:
> From: Grygorii Strashko <grygorii.strashko@linaro.org>
> 
> While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> i've found that the most common problem I have to dial with is absence
> of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> So, I've fixed one driver first
> commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> but then found another one which need to be fixed too (omap_l3_noc.c).
> At this moment I decided to make my life easier and added new macro
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> SET_SYSTEM_SLEEP_PM_OPS macro.
> 
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> ->restore_noirq.
> 
> Further two patches reuse this newly introduced macro.
> 
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
>     point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
>     function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
>     ->restore_noirq.
> 
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>

Looks ok to me.

Acked-by: Pavel Machek <pavel@ucw.cz>

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[PATCH 0/3] Introduce SET_NOIRQ_SYSTEM_SLEEP_PM_OPS and use it

[Pavel Machek]

On Mon 2015-04-27 21:24:29, grygorii.strashko at linaro.org wrote:
> From: Grygorii Strashko <grygorii.strashko@linaro.org>
> 
> While working on suspend-to-disk functionality on TI dra7-evm (DRA7xx SoC)
> i've found that the most common problem I have to dial with is absence
> of corresponding PM callbacks in drivers and, in particular, noirq callbacks.
> So, I've fixed one driver first
> commit 6248015d6867 "ARM: omap-device: add missed callback for suspend-to-disk"
> but then found another one which need to be fixed too (omap_l3_noc.c).
> At this moment I decided to make my life easier and added new macro
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS using the same approach as for the existing
> SET_SYSTEM_SLEEP_PM_OPS macro.
> 
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS: defined for CONFIG_PM_SLEEP and
> assigns ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
> function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
> ->restore_noirq.
> 
> Further two patches reuse this newly introduced macro.
> 
> SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, defined for CONFIG_PM_SLEEP, will
>     point ->suspend_noirq, ->freeze_noirq and ->poweroff_noirq to the same
>     function. Vice versa happens for ->resume_noirq, ->thaw_noirq and
>     ->restore_noirq.
> 
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Kevin Hilman <khilman@linaro.org>
> Cc: Santosh Shilimkar <ssantosh@kernel.org>

Looks ok to me.

Acked-by: Pavel Machek <pavel@ucw.cz>

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html