* [PATCH v3] samples/kprobes: Fix typo in handler_{post,fault}()
@ 2021-05-15 2:39 Tiezhu Yang
2021-05-16 10:02 ` Masami Hiramatsu
0 siblings, 1 reply; 4+ messages in thread
From: Tiezhu Yang @ 2021-05-15 2:39 UTC (permalink / raw)
To: Jonathan Corbet, Marc Koderer, Masami Hiramatsu,
Mauro Carvalho Chehab, Christian Brauner, Jisheng Zhang,
Heiko Carstens, Martin Schwidefsky, Johannes Thumshirn,
Mathieu Desnoyers, Randy Dunlap, Ananth N Mavinakayanahalli,
Andrew Morton, Joe Perches
Cc: linux-kernel, Xuefeng Li
It should use post_handler instead of pre_handler in handler_post().
As Joe Perches suggested, it would be better to use pr_fmt and remove
all the embedded pre/post strings. This would change the style of the
output through.
Also fix a defective format in handler_fault() ending with an 'n' that
should be '\n'.
Fixes: e16c5dd5157e ("samples/kprobes: Add s390 case in kprobe example module")
Fixes: 804defea1c02 ("Kprobes: move kprobe examples to samples/")
Acked-by: Marc Koderer <marc@koderer.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
---
v3: use pr_fmt and fix typo in handler_fault() suggested by Joe Perches
v2: rebase on the latest mainline kernel
samples/kprobes/kprobe_example.c | 33 +++++++++++++++++----------------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/samples/kprobes/kprobe_example.c b/samples/kprobes/kprobe_example.c
index c495664..5f1eb8b 100644
--- a/samples/kprobes/kprobe_example.c
+++ b/samples/kprobes/kprobe_example.c
@@ -10,6 +10,8 @@
* whenever kernel_clone() is invoked to create a new process.
*/
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kprobes.h>
@@ -27,32 +29,31 @@ static struct kprobe kp = {
static int __kprobes handler_pre(struct kprobe *p, struct pt_regs *regs)
{
#ifdef CONFIG_X86
- pr_info("<%s> pre_handler: p->addr = 0x%p, ip = %lx, flags = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, ip = %lx, flags = 0x%lx\n",
p->symbol_name, p->addr, regs->ip, regs->flags);
#endif
#ifdef CONFIG_PPC
- pr_info("<%s> pre_handler: p->addr = 0x%p, nip = 0x%lx, msr = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, nip = 0x%lx, msr = 0x%lx\n",
p->symbol_name, p->addr, regs->nip, regs->msr);
#endif
#ifdef CONFIG_MIPS
- pr_info("<%s> pre_handler: p->addr = 0x%p, epc = 0x%lx, status = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, epc = 0x%lx, status = 0x%lx\n",
p->symbol_name, p->addr, regs->cp0_epc, regs->cp0_status);
#endif
#ifdef CONFIG_ARM64
- pr_info("<%s> pre_handler: p->addr = 0x%p, pc = 0x%lx,"
- " pstate = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, pc = 0x%lx, pstate = 0x%lx\n",
p->symbol_name, p->addr, (long)regs->pc, (long)regs->pstate);
#endif
#ifdef CONFIG_ARM
- pr_info("<%s> pre_handler: p->addr = 0x%p, pc = 0x%lx, cpsr = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, pc = 0x%lx, cpsr = 0x%lx\n",
p->symbol_name, p->addr, (long)regs->ARM_pc, (long)regs->ARM_cpsr);
#endif
#ifdef CONFIG_RISCV
- pr_info("<%s> pre_handler: p->addr = 0x%p, pc = 0x%lx, status = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, pc = 0x%lx, status = 0x%lx\n",
p->symbol_name, p->addr, regs->epc, regs->status);
#endif
#ifdef CONFIG_S390
- pr_info("<%s> pre_handler: p->addr, 0x%p, ip = 0x%lx, flags = 0x%lx\n",
+ pr_info("<%s> p->addr, 0x%p, ip = 0x%lx, flags = 0x%lx\n",
p->symbol_name, p->addr, regs->psw.addr, regs->flags);
#endif
@@ -65,31 +66,31 @@ static void __kprobes handler_post(struct kprobe *p, struct pt_regs *regs,
unsigned long flags)
{
#ifdef CONFIG_X86
- pr_info("<%s> post_handler: p->addr = 0x%p, flags = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, flags = 0x%lx\n",
p->symbol_name, p->addr, regs->flags);
#endif
#ifdef CONFIG_PPC
- pr_info("<%s> post_handler: p->addr = 0x%p, msr = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, msr = 0x%lx\n",
p->symbol_name, p->addr, regs->msr);
#endif
#ifdef CONFIG_MIPS
- pr_info("<%s> post_handler: p->addr = 0x%p, status = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, status = 0x%lx\n",
p->symbol_name, p->addr, regs->cp0_status);
#endif
#ifdef CONFIG_ARM64
- pr_info("<%s> post_handler: p->addr = 0x%p, pstate = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, pstate = 0x%lx\n",
p->symbol_name, p->addr, (long)regs->pstate);
#endif
#ifdef CONFIG_ARM
- pr_info("<%s> post_handler: p->addr = 0x%p, cpsr = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, cpsr = 0x%lx\n",
p->symbol_name, p->addr, (long)regs->ARM_cpsr);
#endif
#ifdef CONFIG_RISCV
- pr_info("<%s> post_handler: p->addr = 0x%p, status = 0x%lx\n",
+ pr_info("<%s> p->addr = 0x%p, status = 0x%lx\n",
p->symbol_name, p->addr, regs->status);
#endif
#ifdef CONFIG_S390
- pr_info("<%s> pre_handler: p->addr, 0x%p, flags = 0x%lx\n",
+ pr_info("<%s> p->addr, 0x%p, flags = 0x%lx\n",
p->symbol_name, p->addr, regs->flags);
#endif
}
@@ -101,7 +102,7 @@ static void __kprobes handler_post(struct kprobe *p, struct pt_regs *regs,
*/
static int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
{
- pr_info("fault_handler: p->addr = 0x%p, trap #%dn", p->addr, trapnr);
+ pr_info("p->addr = 0x%p, trap #%d\n", p->addr, trapnr);
/* Return 0 because we don't handle the fault. */
return 0;
}
--
2.1.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v3] samples/kprobes: Fix typo in handler_{post,fault}()
2021-05-15 2:39 [PATCH v3] samples/kprobes: Fix typo in handler_{post,fault}() Tiezhu Yang
@ 2021-05-16 10:02 ` Masami Hiramatsu
2021-05-16 13:14 ` Joe Perches
0 siblings, 1 reply; 4+ messages in thread
From: Masami Hiramatsu @ 2021-05-16 10:02 UTC (permalink / raw)
To: Tiezhu Yang
Cc: Jonathan Corbet, Marc Koderer, Mauro Carvalho Chehab,
Christian Brauner, Jisheng Zhang, Heiko Carstens,
Martin Schwidefsky, Johannes Thumshirn, Mathieu Desnoyers,
Randy Dunlap, Ananth N Mavinakayanahalli, Andrew Morton,
Joe Perches, linux-kernel, Xuefeng Li
On Sat, 15 May 2021 10:39:06 +0800
Tiezhu Yang <yangtiezhu@loongson.cn> wrote:
> It should use post_handler instead of pre_handler in handler_post().
>
> As Joe Perches suggested, it would be better to use pr_fmt and remove
> all the embedded pre/post strings. This would change the style of the
> output through.
>
NAK, this also shows which handler cought the event.
If you wanna change it. Please replace it with __func__ instead.
> Also fix a defective format in handler_fault() ending with an 'n' that
> should be '\n'.
This is another typo. Please split the fix from this patch.
Thank you,
>
> Fixes: e16c5dd5157e ("samples/kprobes: Add s390 case in kprobe example module")
> Fixes: 804defea1c02 ("Kprobes: move kprobe examples to samples/")
> Acked-by: Marc Koderer <marc@koderer.com>
> Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
> Suggested-by: Joe Perches <joe@perches.com>
> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
> ---
>
> v3: use pr_fmt and fix typo in handler_fault() suggested by Joe Perches
>
> v2: rebase on the latest mainline kernel
>
> samples/kprobes/kprobe_example.c | 33 +++++++++++++++++----------------
> 1 file changed, 17 insertions(+), 16 deletions(-)
>
> diff --git a/samples/kprobes/kprobe_example.c b/samples/kprobes/kprobe_example.c
> index c495664..5f1eb8b 100644
> --- a/samples/kprobes/kprobe_example.c
> +++ b/samples/kprobes/kprobe_example.c
> @@ -10,6 +10,8 @@
> * whenever kernel_clone() is invoked to create a new process.
> */
>
> +#define pr_fmt(fmt) "%s: " fmt, __func__
> +
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/kprobes.h>
> @@ -27,32 +29,31 @@ static struct kprobe kp = {
> static int __kprobes handler_pre(struct kprobe *p, struct pt_regs *regs)
> {
> #ifdef CONFIG_X86
> - pr_info("<%s> pre_handler: p->addr = 0x%p, ip = %lx, flags = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, ip = %lx, flags = 0x%lx\n",
> p->symbol_name, p->addr, regs->ip, regs->flags);
> #endif
> #ifdef CONFIG_PPC
> - pr_info("<%s> pre_handler: p->addr = 0x%p, nip = 0x%lx, msr = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, nip = 0x%lx, msr = 0x%lx\n",
> p->symbol_name, p->addr, regs->nip, regs->msr);
> #endif
> #ifdef CONFIG_MIPS
> - pr_info("<%s> pre_handler: p->addr = 0x%p, epc = 0x%lx, status = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, epc = 0x%lx, status = 0x%lx\n",
> p->symbol_name, p->addr, regs->cp0_epc, regs->cp0_status);
> #endif
> #ifdef CONFIG_ARM64
> - pr_info("<%s> pre_handler: p->addr = 0x%p, pc = 0x%lx,"
> - " pstate = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, pc = 0x%lx, pstate = 0x%lx\n",
> p->symbol_name, p->addr, (long)regs->pc, (long)regs->pstate);
> #endif
> #ifdef CONFIG_ARM
> - pr_info("<%s> pre_handler: p->addr = 0x%p, pc = 0x%lx, cpsr = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, pc = 0x%lx, cpsr = 0x%lx\n",
> p->symbol_name, p->addr, (long)regs->ARM_pc, (long)regs->ARM_cpsr);
> #endif
> #ifdef CONFIG_RISCV
> - pr_info("<%s> pre_handler: p->addr = 0x%p, pc = 0x%lx, status = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, pc = 0x%lx, status = 0x%lx\n",
> p->symbol_name, p->addr, regs->epc, regs->status);
> #endif
> #ifdef CONFIG_S390
> - pr_info("<%s> pre_handler: p->addr, 0x%p, ip = 0x%lx, flags = 0x%lx\n",
> + pr_info("<%s> p->addr, 0x%p, ip = 0x%lx, flags = 0x%lx\n",
> p->symbol_name, p->addr, regs->psw.addr, regs->flags);
> #endif
>
> @@ -65,31 +66,31 @@ static void __kprobes handler_post(struct kprobe *p, struct pt_regs *regs,
> unsigned long flags)
> {
> #ifdef CONFIG_X86
> - pr_info("<%s> post_handler: p->addr = 0x%p, flags = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, flags = 0x%lx\n",
> p->symbol_name, p->addr, regs->flags);
> #endif
> #ifdef CONFIG_PPC
> - pr_info("<%s> post_handler: p->addr = 0x%p, msr = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, msr = 0x%lx\n",
> p->symbol_name, p->addr, regs->msr);
> #endif
> #ifdef CONFIG_MIPS
> - pr_info("<%s> post_handler: p->addr = 0x%p, status = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, status = 0x%lx\n",
> p->symbol_name, p->addr, regs->cp0_status);
> #endif
> #ifdef CONFIG_ARM64
> - pr_info("<%s> post_handler: p->addr = 0x%p, pstate = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, pstate = 0x%lx\n",
> p->symbol_name, p->addr, (long)regs->pstate);
> #endif
> #ifdef CONFIG_ARM
> - pr_info("<%s> post_handler: p->addr = 0x%p, cpsr = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, cpsr = 0x%lx\n",
> p->symbol_name, p->addr, (long)regs->ARM_cpsr);
> #endif
> #ifdef CONFIG_RISCV
> - pr_info("<%s> post_handler: p->addr = 0x%p, status = 0x%lx\n",
> + pr_info("<%s> p->addr = 0x%p, status = 0x%lx\n",
> p->symbol_name, p->addr, regs->status);
> #endif
> #ifdef CONFIG_S390
> - pr_info("<%s> pre_handler: p->addr, 0x%p, flags = 0x%lx\n",
> + pr_info("<%s> p->addr, 0x%p, flags = 0x%lx\n",
> p->symbol_name, p->addr, regs->flags);
> #endif
> }
> @@ -101,7 +102,7 @@ static void __kprobes handler_post(struct kprobe *p, struct pt_regs *regs,
> */
> static int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
> {
> - pr_info("fault_handler: p->addr = 0x%p, trap #%dn", p->addr, trapnr);
> + pr_info("p->addr = 0x%p, trap #%d\n", p->addr, trapnr);
> /* Return 0 because we don't handle the fault. */
> return 0;
> }
> --
> 2.1.0
>
--
Masami Hiramatsu <mhiramat@kernel.org>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v3] samples/kprobes: Fix typo in handler_{post,fault}()
2021-05-16 10:02 ` Masami Hiramatsu
@ 2021-05-16 13:14 ` Joe Perches
2021-05-16 13:20 ` Masami Hiramatsu
0 siblings, 1 reply; 4+ messages in thread
From: Joe Perches @ 2021-05-16 13:14 UTC (permalink / raw)
To: Masami Hiramatsu, Tiezhu Yang
Cc: Jonathan Corbet, Marc Koderer, Mauro Carvalho Chehab,
Christian Brauner, Jisheng Zhang, Heiko Carstens,
Martin Schwidefsky, Johannes Thumshirn, Mathieu Desnoyers,
Randy Dunlap, Ananth N Mavinakayanahalli, Andrew Morton,
linux-kernel, Xuefeng Li
On Sun, 2021-05-16 at 19:02 +0900, Masami Hiramatsu wrote:
> On Sat, 15 May 2021 10:39:06 +0800
> Tiezhu Yang <yangtiezhu@loongson.cn> wrote:
>
> > It should use post_handler instead of pre_handler in handler_post().
> >
> > As Joe Perches suggested, it would be better to use pr_fmt and remove
> > all the embedded pre/post strings. This would change the style of the
> > output through.
> >
>
> NAK, this also shows which handler cought the event.
> If you wanna change it. Please replace it with __func__ instead.
[]
> > diff --git a/samples/kprobes/kprobe_example.c b/samples/kprobes/kprobe_example.c
[]
> > @@ -10,6 +10,8 @@
> > * whenever kernel_clone() is invoked to create a new process.
> > */
> >
> > +#define pr_fmt(fmt) "%s: " fmt, __func__
It does that already via the pr_fmt which uses __func__.
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v3] samples/kprobes: Fix typo in handler_{post,fault}()
2021-05-16 13:14 ` Joe Perches
@ 2021-05-16 13:20 ` Masami Hiramatsu
0 siblings, 0 replies; 4+ messages in thread
From: Masami Hiramatsu @ 2021-05-16 13:20 UTC (permalink / raw)
To: Joe Perches
Cc: Tiezhu Yang, Jonathan Corbet, Marc Koderer,
Mauro Carvalho Chehab, Christian Brauner, Jisheng Zhang,
Heiko Carstens, Martin Schwidefsky, Johannes Thumshirn,
Mathieu Desnoyers, Randy Dunlap, Ananth N Mavinakayanahalli,
Andrew Morton, linux-kernel, Xuefeng Li
On Sun, 16 May 2021 06:14:58 -0700
Joe Perches <joe@perches.com> wrote:
> On Sun, 2021-05-16 at 19:02 +0900, Masami Hiramatsu wrote:
> > On Sat, 15 May 2021 10:39:06 +0800
> > Tiezhu Yang <yangtiezhu@loongson.cn> wrote:
> >
> > > It should use post_handler instead of pre_handler in handler_post().
> > >
> > > As Joe Perches suggested, it would be better to use pr_fmt and remove
> > > all the embedded pre/post strings. This would change the style of the
> > > output through.
> > >
> >
> > NAK, this also shows which handler cought the event.
> > If you wanna change it. Please replace it with __func__ instead.
> []
> > > diff --git a/samples/kprobes/kprobe_example.c b/samples/kprobes/kprobe_example.c
> []
> > > @@ -10,6 +10,8 @@
> > > * whenever kernel_clone() is invoked to create a new process.
> > > */
> > >
> > > +#define pr_fmt(fmt) "%s: " fmt, __func__
>
> It does that already via the pr_fmt which uses __func__.
Oops, I missed that. OK then it is good to me.
Thanks,
--
Masami Hiramatsu <mhiramat@kernel.org>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-05-16 13:20 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-15 2:39 [PATCH v3] samples/kprobes: Fix typo in handler_{post,fault}() Tiezhu Yang
2021-05-16 10:02 ` Masami Hiramatsu
2021-05-16 13:14 ` Joe Perches
2021-05-16 13:20 ` Masami Hiramatsu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.