* [U-Boot] [PATCH 3/4] x86: baytrail: Use macros instead of magic numbers for FSP settings
2017-05-31 8:04 [U-Boot] [PATCH 1/4] x86: baytrail: Change "fsp, mrc-init-tseg-size" default value to 1 Bin Meng
2017-05-31 8:04 ` [U-Boot] [PATCH 2/4] x86: baytrail: Remove "serial-debug-port-*" settings Bin Meng
@ 2017-05-31 8:04 ` Bin Meng
2017-05-31 8:40 ` Stefan Roese
2017-06-01 3:12 ` Simon Glass
2017-05-31 8:04 ` [U-Boot] [PATCH 4/4] x86: baytrail: Change lpe/lpss-sio/scc FSP properties to integer Bin Meng
` (2 subsequent siblings)
4 siblings, 2 replies; 18+ messages in thread
From: Bin Meng @ 2017-05-31 8:04 UTC (permalink / raw)
To: u-boot
Introduce various meaningful macros for FSP settings and switch over
to use them instead of magic numbers.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---
arch/x86/cpu/baytrail/fsp_configs.c | 35 +++++-----
arch/x86/dts/bayleybay.dts | 17 ++---
arch/x86/dts/baytrail_som-db5800-som-6867.dts | 15 +++--
arch/x86/dts/conga-qeval20-qa3-e3845.dts | 29 ++++----
arch/x86/dts/dfi-bt700.dtsi | 29 ++++----
arch/x86/dts/minnowmax.dts | 29 ++++----
.../include/asm/arch-baytrail/fsp/fsp_configs.h | 77 ++++++++++++++++++++++
.../misc/intel,baytrail-fsp.txt | 74 +++++++--------------
8 files changed, 181 insertions(+), 124 deletions(-)
diff --git a/arch/x86/cpu/baytrail/fsp_configs.c b/arch/x86/cpu/baytrail/fsp_configs.c
index 977d5fe..c48ac07 100644
--- a/arch/x86/cpu/baytrail/fsp_configs.c
+++ b/arch/x86/cpu/baytrail/fsp_configs.c
@@ -148,10 +148,10 @@ void update_fsp_configs(struct fsp_config_data *config,
fsp_upd->mrc_init_tseg_size = fdtdec_get_int(blob, node,
"fsp,mrc-init-tseg-size",
- 1);
+ MRC_INIT_TSEG_SIZE_1MB);
fsp_upd->mrc_init_mmio_size = fdtdec_get_int(blob, node,
"fsp,mrc-init-mmio-size",
- 0x800);
+ MRC_INIT_MMIO_SIZE_2048MB);
fsp_upd->mrc_init_spd_addr1 = fdtdec_get_int(blob, node,
"fsp,mrc-init-spd-addr1",
0xa0);
@@ -159,7 +159,8 @@ void update_fsp_configs(struct fsp_config_data *config,
"fsp,mrc-init-spd-addr2",
0xa2);
fsp_upd->emmc_boot_mode = fdtdec_get_int(blob, node,
- "fsp,emmc-boot-mode", 2);
+ "fsp,emmc-boot-mode",
+ EMMC_BOOT_MODE_EMMC41);
fsp_upd->enable_sdio = fdtdec_get_bool(blob, node, "fsp,enable-sdio");
fsp_upd->enable_sdcard = fdtdec_get_bool(blob, node,
"fsp,enable-sdcard");
@@ -169,7 +170,8 @@ void update_fsp_configs(struct fsp_config_data *config,
"fsp,enable-hsuart1");
fsp_upd->enable_spi = fdtdec_get_bool(blob, node, "fsp,enable-spi");
fsp_upd->enable_sata = fdtdec_get_bool(blob, node, "fsp,enable-sata");
- fsp_upd->sata_mode = fdtdec_get_int(blob, node, "fsp,sata-mode", 1);
+ fsp_upd->sata_mode = fdtdec_get_int(blob, node, "fsp,sata-mode",
+ SATA_MODE_AHCI);
fsp_upd->enable_azalia = fdtdec_get_bool(blob, node,
"fsp,enable-azalia");
fsp_upd->enable_xhci = fdtdec_get_bool(blob, node, "fsp,enable-xhci");
@@ -189,10 +191,11 @@ void update_fsp_configs(struct fsp_config_data *config,
fsp_upd->enable_pwm1 = fdtdec_get_bool(blob, node, "fsp,enable-pwm1");
fsp_upd->enable_hsi = fdtdec_get_bool(blob, node, "fsp,enable-hsi");
fsp_upd->igd_dvmt50_pre_alloc = fdtdec_get_int(blob, node,
- "fsp,igd-dvmt50-pre-alloc", 2);
+ "fsp,igd-dvmt50-pre-alloc", IGD_DVMT50_PRE_ALLOC_64MB);
fsp_upd->aperture_size = fdtdec_get_int(blob, node, "fsp,aperture-size",
- 2);
- fsp_upd->gtt_size = fdtdec_get_int(blob, node, "fsp,gtt-size", 2);
+ APERTURE_SIZE_256MB);
+ fsp_upd->gtt_size = fdtdec_get_int(blob, node, "fsp,gtt-size",
+ GTT_SIZE_2MB);
fsp_upd->mrc_debug_msg = fdtdec_get_bool(blob, node,
"fsp,mrc-debug-msg");
fsp_upd->isp_enable = fdtdec_get_bool(blob, node, "fsp,isp-enable");
@@ -203,7 +206,7 @@ void update_fsp_configs(struct fsp_config_data *config,
fsp_upd->txe_uma_enable = fdtdec_get_bool(blob, node,
"fsp,txe-uma-enable");
fsp_upd->os_selection = fdtdec_get_int(blob, node, "fsp,os-selection",
- 4);
+ OS_SELECTION_LINUX);
fsp_upd->emmc45_ddr50_enabled = fdtdec_get_bool(blob, node,
"fsp,emmc45-ddr50-enabled");
fsp_upd->emmc45_hs200_enabled = fdtdec_get_bool(blob, node,
@@ -224,30 +227,32 @@ void update_fsp_configs(struct fsp_config_data *config,
} else {
mem->dram_speed = fdtdec_get_int(blob, node,
"fsp,dram-speed",
- 0x02);
+ DRAM_SPEED_1333MTS);
mem->dram_type = fdtdec_get_int(blob, node,
- "fsp,dram-type", 0x01);
+ "fsp,dram-type",
+ DRAM_TYPE_DDR3L);
mem->dimm_0_enable = fdtdec_get_bool(blob, node,
"fsp,dimm-0-enable");
mem->dimm_1_enable = fdtdec_get_bool(blob, node,
"fsp,dimm-1-enable");
mem->dimm_width = fdtdec_get_int(blob, node,
"fsp,dimm-width",
- 0x00);
+ DIMM_WIDTH_X8);
mem->dimm_density = fdtdec_get_int(blob, node,
"fsp,dimm-density",
- 0x01);
+ DIMM_DENSITY_2GBIT);
mem->dimm_bus_width = fdtdec_get_int(blob, node,
- "fsp,dimm-bus-width", 0x03);
+ "fsp,dimm-bus-width",
+ DIMM_BUS_WIDTH_64BITS);
mem->dimm_sides = fdtdec_get_int(blob, node,
"fsp,dimm-sides",
- 0x00);
+ DIMM_SIDES_1RANKS);
mem->dimm_tcl = fdtdec_get_int(blob, node,
"fsp,dimm-tcl", 0x09);
mem->dimm_trpt_rcd = fdtdec_get_int(blob, node,
"fsp,dimm-trpt-rcd", 0x09);
mem->dimm_twr = fdtdec_get_int(blob, node,
- "fsp,dimm-twr", 0x0A);
+ "fsp,dimm-twr", 0x0a);
mem->dimm_twtr = fdtdec_get_int(blob, node,
"fsp,dimm-twtr", 0x05);
mem->dimm_trrd = fdtdec_get_int(blob, node,
diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts
index 1916991..a577b93 100644
--- a/arch/x86/dts/bayleybay.dts
+++ b/arch/x86/dts/bayleybay.dts
@@ -6,6 +6,7 @@
/dts-v1/;
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
#include <dt-bindings/gpio/x86-gpio.h>
#include <dt-bindings/interrupt-router/intel-irq.h>
@@ -236,17 +237,17 @@
fsp {
compatible = "intel,baytrail-fsp";
- fsp,mrc-init-tseg-size = <1>;
- fsp,mrc-init-mmio-size = <0x800>;
+ fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+ fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
- fsp,emmc-boot-mode = <1>;
+ fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart1;
fsp,enable-spi;
fsp,enable-sata;
- fsp,sata-mode = <1>;
+ fsp,sata-mode = <SATA_MODE_AHCI>;
fsp,enable-lpe;
fsp,lpss-sio-enable-pci-mode;
fsp,enable-dma0;
@@ -260,11 +261,11 @@
fsp,enable-i2c6;
fsp,enable-pwm0;
fsp,enable-pwm1;
- fsp,igd-dvmt50-pre-alloc = <2>;
- fsp,aperture-size = <2>;
- fsp,gtt-size = <2>;
+ fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+ fsp,aperture-size = <APERTURE_SIZE_256MB>;
+ fsp,gtt-size = <GTT_SIZE_2MB>;
fsp,scc-enable-pci-mode;
- fsp,os-selection = <4>;
+ fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
fsp,enable-igd;
diff --git a/arch/x86/dts/baytrail_som-db5800-som-6867.dts b/arch/x86/dts/baytrail_som-db5800-som-6867.dts
index 61af636..3fc36f1 100644
--- a/arch/x86/dts/baytrail_som-db5800-som-6867.dts
+++ b/arch/x86/dts/baytrail_som-db5800-som-6867.dts
@@ -7,6 +7,7 @@
/dts-v1/;
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
#include <dt-bindings/gpio/x86-gpio.h>
#include <dt-bindings/interrupt-router/intel-irq.h>
@@ -259,13 +260,13 @@
fsp {
compatible = "intel,baytrail-fsp";
- fsp,mrc-init-tseg-size = <1>;
- fsp,mrc-init-mmio-size = <0x800>;
+ fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+ fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
fsp,enable-spi;
fsp,enable-sata;
- fsp,sata-mode = <1>;
+ fsp,sata-mode = <SATA_MODE_AHCI>;
fsp,enable-azalia;
fsp,lpss-sio-enable-pci-mode;
fsp,enable-dma0;
@@ -279,11 +280,11 @@
fsp,enable-i2c6;
fsp,enable-pwm0;
fsp,enable-pwm1;
- fsp,igd-dvmt50-pre-alloc = <2>;
- fsp,aperture-size = <2>;
- fsp,gtt-size = <2>;
+ fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+ fsp,aperture-size = <APERTURE_SIZE_256MB>;
+ fsp,gtt-size = <GTT_SIZE_2MB>;
fsp,scc-enable-pci-mode;
- fsp,os-selection = <4>;
+ fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,enable-igd;
};
diff --git a/arch/x86/dts/conga-qeval20-qa3-e3845.dts b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
index 904197a..369cea6 100644
--- a/arch/x86/dts/conga-qeval20-qa3-e3845.dts
+++ b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
@@ -7,6 +7,7 @@
/dts-v1/;
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
#include <dt-bindings/gpio/x86-gpio.h>
#include <dt-bindings/interrupt-router/intel-irq.h>
@@ -246,42 +247,42 @@
fsp {
compatible = "intel,baytrail-fsp";
- fsp,mrc-init-tseg-size = <1>;
- fsp,mrc-init-mmio-size = <0x800>;
+ fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+ fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
- fsp,emmc-boot-mode = <1>;
+ fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart1;
fsp,enable-spi;
fsp,enable-sata;
- fsp,sata-mode = <1>;
+ fsp,sata-mode = <SATA_MODE_AHCI>;
fsp,enable-lpe;
fsp,lpss-sio-enable-pci-mode;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-pwm0;
fsp,enable-pwm1;
- fsp,igd-dvmt50-pre-alloc = <2>;
- fsp,aperture-size = <2>;
- fsp,gtt-size = <2>;
+ fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+ fsp,aperture-size = <APERTURE_SIZE_256MB>;
+ fsp,gtt-size = <GTT_SIZE_2MB>;
fsp,scc-enable-pci-mode;
- fsp,os-selection = <4>;
+ fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
fsp,enable-igd;
fsp,enable-memory-down;
fsp,memory-down-params {
compatible = "intel,baytrail-fsp-mdp";
- fsp,dram-speed = <2>; /* 2=1333MHz */
- fsp,dram-type = <1>; /* 1=DDR3L */
+ fsp,dram-speed = <DRAM_SPEED_1333MTS>;
+ fsp,dram-type = <DRAM_TYPE_DDR3L>;
fsp,dimm-0-enable;
fsp,dimm-1-enable;
- fsp,dimm-width = <1>; /* 1=x16, 2=x32 */
- fsp,dimm-density = <2>; /* 2=4Gbit */
- fsp,dimm-bus-width = <3>; /* 3=64bits */
- fsp,dimm-sides = <0>; /* 0=1 ranks -> 0x2b */
+ fsp,dimm-width = <DIMM_WIDTH_X16>;
+ fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
+ fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
+ fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
/* These following values might need a re-visit */
fsp,dimm-tcl = <8>;
diff --git a/arch/x86/dts/dfi-bt700.dtsi b/arch/x86/dts/dfi-bt700.dtsi
index a369e73..33f2a9c 100644
--- a/arch/x86/dts/dfi-bt700.dtsi
+++ b/arch/x86/dts/dfi-bt700.dtsi
@@ -5,6 +5,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
#include <dt-bindings/gpio/x86-gpio.h>
#include <dt-bindings/interrupt-router/intel-irq.h>
@@ -248,18 +249,18 @@
fsp {
compatible = "intel,baytrail-fsp";
- fsp,mrc-init-tseg-size = <1>;
- fsp,mrc-init-mmio-size = <0x800>;
+ fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+ fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
- fsp,emmc-boot-mode = <1>;
+ fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart0;
fsp,enable-hsuart1;
fsp,enable-spi;
fsp,enable-sata;
- fsp,sata-mode = <1>;
+ fsp,sata-mode = <SATA_MODE_AHCI>;
fsp,enable-lpe;
fsp,lpss-sio-enable-pci-mode;
fsp,enable-dma0;
@@ -273,24 +274,24 @@
fsp,enable-i2c6;
fsp,enable-pwm0;
fsp,enable-pwm1;
- fsp,igd-dvmt50-pre-alloc = <2>;
- fsp,aperture-size = <2>;
- fsp,gtt-size = <2>;
+ fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+ fsp,aperture-size = <APERTURE_SIZE_256MB>;
+ fsp,gtt-size = <GTT_SIZE_2MB>;
fsp,scc-enable-pci-mode;
- fsp,os-selection = <4>;
+ fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
fsp,enable-igd;
fsp,enable-memory-down;
fsp,memory-down-params {
compatible = "intel,baytrail-fsp-mdp";
- fsp,dram-speed = <2>; /* 2=1333MHz */
- fsp,dram-type = <1>; /* 1=DDR3L */
+ fsp,dram-speed = <DRAM_SPEED_1333MTS>;
+ fsp,dram-type = <DRAM_TYPE_DDR3L>;
fsp,dimm-0-enable;
- fsp,dimm-width = <1>; /* 1=x16, 2=x32 */
- fsp,dimm-density = <3>; /* 3=8Gbit */
- fsp,dimm-bus-width = <3>; /* 3=64bits */
- fsp,dimm-sides = <0>; /* 0=1 ranks -> 0x2b */
+ fsp,dimm-width = <DIMM_WIDTH_X16>;
+ fsp,dimm-density = <DIMM_DENSITY_8GBIT>;
+ fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
+ fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
/* These following values might need a re-visit */
fsp,dimm-tcl = <8>;
diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts
index 75d2761..a4e2fa2 100644
--- a/arch/x86/dts/minnowmax.dts
+++ b/arch/x86/dts/minnowmax.dts
@@ -6,6 +6,7 @@
/dts-v1/;
+#include <asm/arch-baytrail/fsp/fsp_configs.h>
#include <dt-bindings/gpio/x86-gpio.h>
#include <dt-bindings/interrupt-router/intel-irq.h>
@@ -260,17 +261,17 @@
fsp {
compatible = "intel,baytrail-fsp";
- fsp,mrc-init-tseg-size = <1>;
- fsp,mrc-init-mmio-size = <0x800>;
+ fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+ fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
- fsp,emmc-boot-mode = <1>;
+ fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart1;
fsp,enable-spi;
fsp,enable-sata;
- fsp,sata-mode = <1>;
+ fsp,sata-mode = <SATA_MODE_AHCI>;
fsp,enable-lpe;
fsp,lpss-sio-enable-pci-mode;
fsp,enable-dma0;
@@ -284,24 +285,24 @@
fsp,enable-i2c6;
fsp,enable-pwm0;
fsp,enable-pwm1;
- fsp,igd-dvmt50-pre-alloc = <2>;
- fsp,aperture-size = <2>;
- fsp,gtt-size = <2>;
+ fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+ fsp,aperture-size = <APERTURE_SIZE_256MB>;
+ fsp,gtt-size = <GTT_SIZE_2MB>;
fsp,scc-enable-pci-mode;
- fsp,os-selection = <4>;
+ fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
fsp,enable-igd;
fsp,enable-memory-down;
fsp,memory-down-params {
compatible = "intel,baytrail-fsp-mdp";
- fsp,dram-speed = <1>;
- fsp,dram-type = <1>;
+ fsp,dram-speed = <DRAM_SPEED_1066MTS>;
+ fsp,dram-type = <DRAM_TYPE_DDR3L>;
fsp,dimm-0-enable;
- fsp,dimm-width = <1>;
- fsp,dimm-density = <2>;
- fsp,dimm-bus-width = <3>;
- fsp,dimm-sides = <0>;
+ fsp,dimm-width = <DIMM_WIDTH_X16>;
+ fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
+ fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
+ fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
fsp,dimm-tcl = <0xb>;
fsp,dimm-trpt-rcd = <0xb>;
fsp,dimm-twr = <0xc>;
diff --git a/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h b/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h
index e539890..382cb79 100644
--- a/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h
+++ b/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h
@@ -7,6 +7,7 @@
#ifndef __FSP_CONFIGS_H__
#define __FSP_CONFIGS_H__
+#ifndef __ASSEMBLY__
struct fsp_config_data {
struct fsp_cfg_common common;
struct upd_region fsp_upd;
@@ -15,5 +16,81 @@ struct fsp_config_data {
struct fspinit_rtbuf {
struct common_buf common; /* FSP common runtime data structure */
};
+#endif
+
+/* FSP user configuration settings */
+
+#define MRC_INIT_TSEG_SIZE_1MB 1
+#define MRC_INIT_TSEG_SIZE_2MB 2
+#define MRC_INIT_TSEG_SIZE_4MB 4
+#define MRC_INIT_TSEG_SIZE_8MB 8
+
+#define MRC_INIT_MMIO_SIZE_1024MB 0x400
+#define MRC_INIT_MMIO_SIZE_1536MB 0x600
+#define MRC_INIT_MMIO_SIZE_2048MB 0x800
+
+#define EMMC_BOOT_MODE_DISABLED 0
+#define EMMC_BOOT_MODE_AUTO 1
+#define EMMC_BOOT_MODE_EMMC41 2
+#define EMMC_BOOT_MODE_EMCC45 3
+
+#define SATA_MODE_IDE 0
+#define SATA_MODE_AHCI 1
+
+#define IGD_DVMT50_PRE_ALLOC_32MB 0x01
+#define IGD_DVMT50_PRE_ALLOC_64MB 0x02
+#define IGD_DVMT50_PRE_ALLOC_96MB 0x03
+#define IGD_DVMT50_PRE_ALLOC_128MB 0x04
+#define IGD_DVMT50_PRE_ALLOC_160MB 0x05
+#define IGD_DVMT50_PRE_ALLOC_192MB 0x06
+#define IGD_DVMT50_PRE_ALLOC_224MB 0x07
+#define IGD_DVMT50_PRE_ALLOC_256MB 0x08
+#define IGD_DVMT50_PRE_ALLOC_288MB 0x09
+#define IGD_DVMT50_PRE_ALLOC_320MB 0x0a
+#define IGD_DVMT50_PRE_ALLOC_352MB 0x0b
+#define IGD_DVMT50_PRE_ALLOC_384MB 0x0c
+#define IGD_DVMT50_PRE_ALLOC_416MB 0x0d
+#define IGD_DVMT50_PRE_ALLOC_448MB 0x0e
+#define IGD_DVMT50_PRE_ALLOC_480MB 0x0f
+#define IGD_DVMT50_PRE_ALLOC_512MB 0x10
+
+#define APERTURE_SIZE_128MB 1
+#define APERTURE_SIZE_256MB 2
+#define APERTURE_SIZE_512MB 3
+
+#define GTT_SIZE_1MB 1
+#define GTT_SIZE_2MB 2
+
+#define OS_SELECTION_ANDROID 1
+#define OS_SELECTION_LINUX 4
+
+#define DRAM_SPEED_800MTS 0
+#define DRAM_SPEED_1066MTS 1
+#define DRAM_SPEED_1333MTS 2
+#define DRAM_SPEED_1600MTS 3
+
+#define DRAM_TYPE_DDR3 0
+#define DRAM_TYPE_DDR3L 1
+#define DRAM_TYPE_DDR3ECC 2
+#define DRAM_TYPE_LPDDR2 4
+#define DRAM_TYPE_LPDDR3 5
+#define DRAM_TYPE_DDR4 6
+
+#define DIMM_WIDTH_X8 0
+#define DIMM_WIDTH_X16 1
+#define DIMM_WIDTH_X32 2
+
+#define DIMM_DENSITY_1GBIT 0
+#define DIMM_DENSITY_2GBIT 1
+#define DIMM_DENSITY_4GBIT 2
+#define DIMM_DENSITY_8GBIT 3
+
+#define DIMM_BUS_WIDTH_8BITS 0
+#define DIMM_BUS_WIDTH_16BITS 1
+#define DIMM_BUS_WIDTH_32BITS 2
+#define DIMM_BUS_WIDTH_64BITS 3
+
+#define DIMM_SIDES_1RANKS 0
+#define DIMM_SIDES_2RANKS 1
#endif /* __FSP_CONFIGS_H__ */
diff --git a/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
index f40011e..691ae53 100644
--- a/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
+++ b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
@@ -6,8 +6,8 @@ UPD data for configuring the SoC.
All properties can be found within the `upd-region` struct in
arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h, under the same names, and in
-Intel's FSP Binary Configuration Tool for Bay Trail. This list of properties is
-matched up to Intel's E3800 FSPv4 release.
+Intel's FSP Binary Configuration Tool for Bay Trail. This list of properties
+is matched up to Intel's E3800 FSPv4 release.
# Boolean properties:
@@ -44,8 +44,8 @@ matched up to Intel's E3800 FSPv4 release.
- fsp,enable-memory-down
If you set "fsp,enable-memory-down" you are strongly encouraged to provide an
-"fsp,memory-down-params{};" to specify how your memory is configured. If you do
-not set "fsp,enable-memory-down", then the DIMM SPD information will be
+"fsp,memory-down-params{};" to specify how your memory is configured. If you
+do not set "fsp,enable-memory-down", then the DIMM SPD information will be
discovered by the FSP and used to setup main memory.
@@ -72,41 +72,12 @@ discovered by the FSP and used to setup main memory.
# Integer properties:
- - fsp,dram-speed:
- 0x0: "800 MHz"
- 0x1: "1066 MHz"
- 0x2: "1333 MHz"
- 0x3: "1600 MHz"
-
+ - fsp,dram-speed
- fsp,dram-type
- 0x0: "DDR3"
- 0x1: "DDR3L"
- 0x2: "DDR3U"
- 0x4: "LPDDR2"
- 0x5: "LPDDR3"
- 0x6: "DDR4"
-
- fsp,dimm-width
- 0x0: "x8"
- 0x1: "x16"
- 0x2: "x32"
-
- fsp,dimm-density
- 0x0: "1 Gbit"
- 0x1: "2 Gbit"
- 0x2: "4 Gbit"
- 0x3: "8 Gbit"
-
- fsp,dimm-bus-width
- 0x0: "8 bits"
- 0x1: "16 bits"
- 0x2: "32 bits"
- 0x3: "64 bits"
-
- fsp,dimm-sides
- 0x0: "1 rank"
- 0x1: "2 ranks"
-
- fsp,dimm-tcl
- fsp,dimm-trpt-rcd
- fsp,dimm-twr
@@ -116,6 +87,9 @@ discovered by the FSP and used to setup main memory.
- fsp,dimm-tfaw
};
+For all integer properties, available options are listed in fsp_configs.h in
+arch/x86/include/asm/arch-baytrail/fsp directory (eg: MRC_INIT_TSEG_SIZE_1MB).
+
Example (from MinnowMax Dual Core):
-----------------------------------
@@ -125,18 +99,17 @@ Example (from MinnowMax Dual Core):
fsp {
compatible = "intel,baytrail-fsp";
- fsp,mrc-init-tseg-size = <0>;
- fsp,mrc-init-mmio-size = <0x800>;
+ fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
+ fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
- fsp,emmc-boot-mode = <2>;
+ fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart1;
fsp,enable-spi;
fsp,enable-sata;
- fsp,sata-mode = <1>;
- fsp,enable-xhci;
+ fsp,sata-mode = <SATA_MODE_AHCI>;
fsp,enable-lpe;
fsp,lpss-sio-enable-pci-mode;
fsp,enable-dma0;
@@ -150,27 +123,24 @@ Example (from MinnowMax Dual Core):
fsp,enable-i2c6;
fsp,enable-pwm0;
fsp,enable-pwm1;
- fsp,igd-dvmt50-pre-alloc = <2>;
- fsp,aperture-size = <2>;
- fsp,gtt-size = <2>;
- fsp,serial-debug-port-address = <0x3f8>;
- fsp,serial-debug-port-type = <1>;
- fsp,mrc-debug-msg;
+ fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
+ fsp,aperture-size = <APERTURE_SIZE_256MB>;
+ fsp,gtt-size = <GTT_SIZE_2MB>;
fsp,scc-enable-pci-mode;
- fsp,os-selection = <4>;
+ fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
fsp,enable-igd;
fsp,enable-memory-down;
fsp,memory-down-params {
compatible = "intel,baytrail-fsp-mdp";
- fsp,dram-speed = <1>;
- fsp,dram-type = <1>;
+ fsp,dram-speed = <DRAM_SPEED_1066MTS>;
+ fsp,dram-type = <DRAM_TYPE_DDR3L>;
fsp,dimm-0-enable;
- fsp,dimm-width = <1>;
- fsp,dimm-density = <2>;
- fsp,dimm-bus-width = <3>;
- fsp,dimm-sides = <0>;
+ fsp,dimm-width = <DIMM_WIDTH_X16>;
+ fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
+ fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
+ fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
fsp,dimm-tcl = <0xb>;
fsp,dimm-trpt-rcd = <0xb>;
fsp,dimm-twr = <0xc>;
--
2.9.2
^ permalink raw reply related [flat|nested] 18+ messages in thread* [U-Boot] [PATCH 4/4] x86: baytrail: Change lpe/lpss-sio/scc FSP properties to integer
2017-05-31 8:04 [U-Boot] [PATCH 1/4] x86: baytrail: Change "fsp, mrc-init-tseg-size" default value to 1 Bin Meng
2017-05-31 8:04 ` [U-Boot] [PATCH 2/4] x86: baytrail: Remove "serial-debug-port-*" settings Bin Meng
2017-05-31 8:04 ` [U-Boot] [PATCH 3/4] x86: baytrail: Use macros instead of magic numbers for FSP settings Bin Meng
@ 2017-05-31 8:04 ` Bin Meng
2017-05-31 8:41 ` Stefan Roese
2017-06-01 3:12 ` Simon Glass
2017-05-31 8:18 ` [U-Boot] [PATCH 1/4] x86: baytrail: Change "fsp, mrc-init-tseg-size" default value to 1 Stefan Roese
2017-06-01 3:12 ` Simon Glass
4 siblings, 2 replies; 18+ messages in thread
From: Bin Meng @ 2017-05-31 8:04 UTC (permalink / raw)
To: u-boot
At present lpe/lpss-sio/scc FSP properties are all boolean, but in
fact for "enable-lpe" it has 3 possible options. This adds macros
for these options and change the property from a boolean type to
an integer type, and change their names to explicitly indicate what
the property is really for.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---
arch/x86/cpu/baytrail/fsp_configs.c | 11 ++++++-----
arch/x86/dts/bayleybay.dts | 6 +++---
arch/x86/dts/baytrail_som-db5800-som-6867.dts | 4 ++--
arch/x86/dts/conga-qeval20-qa3-e3845.dts | 6 +++---
arch/x86/dts/dfi-bt700.dtsi | 6 +++---
arch/x86/dts/minnowmax.dts | 6 +++---
arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h | 10 ++++++++++
arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h | 6 +++---
doc/device-tree-bindings/misc/intel,baytrail-fsp.txt | 12 ++++++------
9 files changed, 39 insertions(+), 28 deletions(-)
diff --git a/arch/x86/cpu/baytrail/fsp_configs.c b/arch/x86/cpu/baytrail/fsp_configs.c
index c48ac07..45f9bf9 100644
--- a/arch/x86/cpu/baytrail/fsp_configs.c
+++ b/arch/x86/cpu/baytrail/fsp_configs.c
@@ -175,9 +175,10 @@ void update_fsp_configs(struct fsp_config_data *config,
fsp_upd->enable_azalia = fdtdec_get_bool(blob, node,
"fsp,enable-azalia");
fsp_upd->enable_xhci = fdtdec_get_bool(blob, node, "fsp,enable-xhci");
- fsp_upd->enable_lpe = fdtdec_get_bool(blob, node, "fsp,enable-lpe");
- fsp_upd->lpss_sio_enable_pci_mode = fdtdec_get_bool(blob, node,
- "fsp,lpss-sio-enable-pci-mode");
+ fsp_upd->lpe_mode = fdtdec_get_int(blob, node, "fsp,lpe-mode",
+ LPE_MODE_PCI);
+ fsp_upd->lpss_sio_mode = fdtdec_get_int(blob, node, "fsp,lpss-sio-mode",
+ LPSS_SIO_MODE_PCI);
fsp_upd->enable_dma0 = fdtdec_get_bool(blob, node, "fsp,enable-dma0");
fsp_upd->enable_dma1 = fdtdec_get_bool(blob, node, "fsp,enable-dma1");
fsp_upd->enable_i2_c0 = fdtdec_get_bool(blob, node, "fsp,enable-i2c0");
@@ -199,8 +200,8 @@ void update_fsp_configs(struct fsp_config_data *config,
fsp_upd->mrc_debug_msg = fdtdec_get_bool(blob, node,
"fsp,mrc-debug-msg");
fsp_upd->isp_enable = fdtdec_get_bool(blob, node, "fsp,isp-enable");
- fsp_upd->scc_enable_pci_mode = fdtdec_get_bool(blob, node,
- "fsp,scc-enable-pci-mode");
+ fsp_upd->scc_mode = fdtdec_get_int(blob, node, "fsp,scc-mode",
+ SCC_MODE_PCI);
fsp_upd->igd_render_standby = fdtdec_get_bool(blob, node,
"fsp,igd-render-standby");
fsp_upd->txe_uma_enable = fdtdec_get_bool(blob, node,
diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts
index a577b93..0c314e0 100644
--- a/arch/x86/dts/bayleybay.dts
+++ b/arch/x86/dts/bayleybay.dts
@@ -248,8 +248,8 @@
fsp,enable-spi;
fsp,enable-sata;
fsp,sata-mode = <SATA_MODE_AHCI>;
- fsp,enable-lpe;
- fsp,lpss-sio-enable-pci-mode;
+ fsp,lpe-mode = <LPE_MODE_PCI>;
+ fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-i2c0;
@@ -264,7 +264,7 @@
fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
fsp,aperture-size = <APERTURE_SIZE_256MB>;
fsp,gtt-size = <GTT_SIZE_2MB>;
- fsp,scc-enable-pci-mode;
+ fsp,scc-mode = <SCC_MODE_PCI>;
fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
diff --git a/arch/x86/dts/baytrail_som-db5800-som-6867.dts b/arch/x86/dts/baytrail_som-db5800-som-6867.dts
index 3fc36f1..171e7ff 100644
--- a/arch/x86/dts/baytrail_som-db5800-som-6867.dts
+++ b/arch/x86/dts/baytrail_som-db5800-som-6867.dts
@@ -268,7 +268,7 @@
fsp,enable-sata;
fsp,sata-mode = <SATA_MODE_AHCI>;
fsp,enable-azalia;
- fsp,lpss-sio-enable-pci-mode;
+ fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-i2c0;
@@ -283,7 +283,7 @@
fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
fsp,aperture-size = <APERTURE_SIZE_256MB>;
fsp,gtt-size = <GTT_SIZE_2MB>;
- fsp,scc-enable-pci-mode;
+ fsp,scc-mode = <SCC_MODE_PCI>;
fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,enable-igd;
};
diff --git a/arch/x86/dts/conga-qeval20-qa3-e3845.dts b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
index 369cea6..ae11ccc 100644
--- a/arch/x86/dts/conga-qeval20-qa3-e3845.dts
+++ b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
@@ -258,8 +258,8 @@
fsp,enable-spi;
fsp,enable-sata;
fsp,sata-mode = <SATA_MODE_AHCI>;
- fsp,enable-lpe;
- fsp,lpss-sio-enable-pci-mode;
+ fsp,lpe-mode = <LPE_MODE_PCI>;
+ fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-pwm0;
@@ -267,7 +267,7 @@
fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
fsp,aperture-size = <APERTURE_SIZE_256MB>;
fsp,gtt-size = <GTT_SIZE_2MB>;
- fsp,scc-enable-pci-mode;
+ fsp,scc-mode = <SCC_MODE_PCI>;
fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
diff --git a/arch/x86/dts/dfi-bt700.dtsi b/arch/x86/dts/dfi-bt700.dtsi
index 33f2a9c..04aa95a 100644
--- a/arch/x86/dts/dfi-bt700.dtsi
+++ b/arch/x86/dts/dfi-bt700.dtsi
@@ -261,8 +261,8 @@
fsp,enable-spi;
fsp,enable-sata;
fsp,sata-mode = <SATA_MODE_AHCI>;
- fsp,enable-lpe;
- fsp,lpss-sio-enable-pci-mode;
+ fsp,lpe-mode = <LPE_MODE_PCI>;
+ fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-i2c0;
@@ -277,7 +277,7 @@
fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
fsp,aperture-size = <APERTURE_SIZE_256MB>;
fsp,gtt-size = <GTT_SIZE_2MB>;
- fsp,scc-enable-pci-mode;
+ fsp,scc-mode = <SCC_MODE_PCI>;
fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts
index a4e2fa2..4c0a8fe 100644
--- a/arch/x86/dts/minnowmax.dts
+++ b/arch/x86/dts/minnowmax.dts
@@ -272,8 +272,8 @@
fsp,enable-spi;
fsp,enable-sata;
fsp,sata-mode = <SATA_MODE_AHCI>;
- fsp,enable-lpe;
- fsp,lpss-sio-enable-pci-mode;
+ fsp,lpe-mode = <LPE_MODE_PCI>;
+ fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-i2c0;
@@ -288,7 +288,7 @@
fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
fsp,aperture-size = <APERTURE_SIZE_256MB>;
fsp,gtt-size = <GTT_SIZE_2MB>;
- fsp,scc-enable-pci-mode;
+ fsp,scc-mode = <SCC_MODE_PCI>;
fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
diff --git a/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h b/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h
index 382cb79..1c6c247 100644
--- a/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h
+++ b/arch/x86/include/asm/arch-baytrail/fsp/fsp_configs.h
@@ -93,4 +93,14 @@ struct fspinit_rtbuf {
#define DIMM_SIDES_1RANKS 0
#define DIMM_SIDES_2RANKS 1
+#define LPE_MODE_DISABLED 0
+#define LPE_MODE_PCI 1
+#define LPE_MODE_ACPI 2
+
+#define LPSS_SIO_MODE_ACPI 0
+#define LPSS_SIO_MODE_PCI 1
+
+#define SCC_MODE_ACPI 0
+#define SCC_MODE_PCI 1
+
#endif /* __FSP_CONFIGS_H__ */
diff --git a/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h b/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h
index b083b6e..8c07b37 100644
--- a/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h
+++ b/arch/x86/include/asm/arch-baytrail/fsp/fsp_vpd.h
@@ -47,8 +47,8 @@ struct __packed upd_region {
uint8_t enable_azalia; /* Offset 0x002f */
uint32_t azalia_config_ptr; /* Offset 0x0030 */
uint8_t enable_xhci; /* Offset 0x0034 */
- uint8_t enable_lpe; /* Offset 0x0035 */
- uint8_t lpss_sio_enable_pci_mode; /* Offset 0x0036 */
+ uint8_t lpe_mode; /* Offset 0x0035 */
+ uint8_t lpss_sio_mode; /* Offset 0x0036 */
uint8_t enable_dma0; /* Offset 0x0037 */
uint8_t enable_dma1; /* Offset 0x0038 */
uint8_t enable_i2_c0; /* Offset 0x0039 */
@@ -67,7 +67,7 @@ struct __packed upd_region {
uint8_t reserved2[5]; /* Offset 0x0046 */
uint8_t mrc_debug_msg; /* Offset 0x004b */
uint8_t isp_enable; /* Offset 0x004c */
- uint8_t scc_enable_pci_mode; /* Offset 0x004d */
+ uint8_t scc_mode; /* Offset 0x004d */
uint8_t igd_render_standby; /* Offset 0x004e */
uint8_t txe_uma_enable; /* Offset 0x004f */
uint8_t os_selection; /* Offset 0x0050 */
diff --git a/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
index 691ae53..929ae88 100644
--- a/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
+++ b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt
@@ -19,8 +19,6 @@ is matched up to Intel's E3800 FSPv4 release.
- fsp,enable-sata
- fsp,enable-azalia
- fsp,enable-xhci
-- fsp,enable-lpe
-- fsp,lpss-sio-enable-pci-mode
- fsp,enable-dma0
- fsp,enable-dma1
- fsp,enable-i2-c0
@@ -35,7 +33,6 @@ is matched up to Intel's E3800 FSPv4 release.
- fsp,enable-hsi
- fsp,mrc-debug-msg
- fsp,isp-enable
-- fsp,scc-enable-pci-mode
- fsp,igd-render-standby
- fsp,txe-uma-enable
- fsp,emmc45-ddr50-enabled
@@ -57,9 +54,12 @@ discovered by the FSP and used to setup main memory.
- fsp,mrc-init-spd-addr2
- fsp,emmc-boot-mode
- fsp,sata-mode
+- fsp,lpe-mode
+- fsp,lpss-sio-mode
- fsp,igd-dvmt50-pre-alloc
- fsp,aperture-size
- fsp,gtt-size
+- fsp,scc-mode
- fsp,os-selection
- fsp,emmc45-retune-timer-value
@@ -110,8 +110,8 @@ Example (from MinnowMax Dual Core):
fsp,enable-spi;
fsp,enable-sata;
fsp,sata-mode = <SATA_MODE_AHCI>;
- fsp,enable-lpe;
- fsp,lpss-sio-enable-pci-mode;
+ fsp,lpe-mode = <LPE_MODE_PCI>;
+ fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-i2c0;
@@ -126,7 +126,7 @@ Example (from MinnowMax Dual Core):
fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
fsp,aperture-size = <APERTURE_SIZE_256MB>;
fsp,gtt-size = <GTT_SIZE_2MB>;
- fsp,scc-enable-pci-mode;
+ fsp,scc-mode = <SCC_MODE_PCI>;
fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
--
2.9.2
^ permalink raw reply related [flat|nested] 18+ messages in thread