From: Michael Ellerman <mpe@ellerman.id.au> To: Chris Packham <chris.packham@alliedtelesis.co.nz>, wsa@kernel.org, andriy.shevchenko@linux.intel.com, andy.shevchenko@gmail.com, robh+dt@kernel.org Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org, Chris Packham <chris.packham@alliedtelesis.co.nz>, Benjamin Herrenschmidt <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org> Subject: Re: [PATCH v3 2/4] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers Date: Wed, 26 May 2021 11:02:05 +1000 [thread overview] Message-ID: <874keqi9yq.fsf@mpe.ellerman.id.au> (raw) In-Reply-To: <20210511212052.27242-3-chris.packham@alliedtelesis.co.nz> Chris Packham <chris.packham@alliedtelesis.co.nz> writes: > The i2c controllers on the P2040/P2041 have an erratum where the > documented scheme for i2c bus recovery will not work (A-004447). A > different mechanism is needed which is documented in the P2040 Chip > Errata Rev Q (latest available at the time of writing). > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > --- > arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) Acked-by: Michael Ellerman <mpe@ellerman.id.au> cheers > diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi > index 872e4485dc3f..ddc018d42252 100644 > --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi > +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi > @@ -371,7 +371,23 @@ sdhc@114000 { > }; > > /include/ "qoriq-i2c-0.dtsi" > + i2c@118000 { > + fsl,i2c-erratum-a004447; > + }; > + > + i2c@118100 { > + fsl,i2c-erratum-a004447; > + }; > + > /include/ "qoriq-i2c-1.dtsi" > + i2c@119000 { > + fsl,i2c-erratum-a004447; > + }; > + > + i2c@119100 { > + fsl,i2c-erratum-a004447; > + }; > + > /include/ "qoriq-duart-0.dtsi" > /include/ "qoriq-duart-1.dtsi" > /include/ "qoriq-gpio-0.dtsi" > -- > 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Michael Ellerman <mpe@ellerman.id.au> To: Chris Packham <chris.packham@alliedtelesis.co.nz>, wsa@kernel.org, andriy.shevchenko@linux.intel.com, andy.shevchenko@gmail.com, robh+dt@kernel.org Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Chris Packham <chris.packham@alliedtelesis.co.nz>, Paul Mackerras <paulus@samba.org>, linux-i2c@vger.kernel.org, linuxppc-dev@lists.ozlabs.org Subject: Re: [PATCH v3 2/4] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers Date: Wed, 26 May 2021 11:02:05 +1000 [thread overview] Message-ID: <874keqi9yq.fsf@mpe.ellerman.id.au> (raw) In-Reply-To: <20210511212052.27242-3-chris.packham@alliedtelesis.co.nz> Chris Packham <chris.packham@alliedtelesis.co.nz> writes: > The i2c controllers on the P2040/P2041 have an erratum where the > documented scheme for i2c bus recovery will not work (A-004447). A > different mechanism is needed which is documented in the P2040 Chip > Errata Rev Q (latest available at the time of writing). > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > --- > arch/powerpc/boot/dts/fsl/p2041si-post.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) Acked-by: Michael Ellerman <mpe@ellerman.id.au> cheers > diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi > index 872e4485dc3f..ddc018d42252 100644 > --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi > +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi > @@ -371,7 +371,23 @@ sdhc@114000 { > }; > > /include/ "qoriq-i2c-0.dtsi" > + i2c@118000 { > + fsl,i2c-erratum-a004447; > + }; > + > + i2c@118100 { > + fsl,i2c-erratum-a004447; > + }; > + > /include/ "qoriq-i2c-1.dtsi" > + i2c@119000 { > + fsl,i2c-erratum-a004447; > + }; > + > + i2c@119100 { > + fsl,i2c-erratum-a004447; > + }; > + > /include/ "qoriq-duart-0.dtsi" > /include/ "qoriq-duart-1.dtsi" > /include/ "qoriq-gpio-0.dtsi" > -- > 2.31.1
next prev parent reply other threads:[~2021-05-26 1:02 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-05-11 21:20 [PATCH v3 0/4] P2040/P2041 i2c recovery erratum Chris Packham 2021-05-11 21:20 ` Chris Packham 2021-05-11 21:20 ` [PATCH v3 1/4] dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag Chris Packham 2021-05-11 21:20 ` [PATCH v3 1/4] dt-bindings: i2c: mpc: Add fsl, i2c-erratum-a004447 flag Chris Packham 2021-05-11 21:20 ` [PATCH v3 2/4] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers Chris Packham 2021-05-11 21:20 ` [PATCH v3 2/4] powerpc/fsl: set fsl, i2c-erratum-a004447 " Chris Packham 2021-05-26 1:02 ` Michael Ellerman [this message] 2021-05-26 1:02 ` [PATCH v3 2/4] powerpc/fsl: set fsl,i2c-erratum-a004447 " Michael Ellerman 2021-05-11 21:20 ` [PATCH v3 3/4] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 " Chris Packham 2021-05-11 21:20 ` [PATCH v3 3/4] powerpc/fsl: set fsl, i2c-erratum-a004447 " Chris Packham 2021-05-26 1:02 ` [PATCH v3 3/4] powerpc/fsl: set fsl,i2c-erratum-a004447 " Michael Ellerman 2021-05-26 1:02 ` Michael Ellerman 2021-05-11 21:20 ` [PATCH v3 4/4] i2c: mpc: implement erratum A-004447 workaround Chris Packham 2021-05-11 21:20 ` Chris Packham 2021-05-11 22:10 ` [PATCH v3 0/4] P2040/P2041 i2c recovery erratum Joakim Tjernlund 2021-05-11 22:10 ` Joakim Tjernlund 2021-05-12 1:48 ` Chris Packham 2021-05-12 1:48 ` Chris Packham 2021-05-12 8:57 ` Joakim Tjernlund 2021-05-12 8:57 ` Joakim Tjernlund 2021-05-12 15:01 ` wsa 2021-05-12 15:01 ` wsa 2021-05-20 3:36 ` Chris Packham 2021-05-20 3:36 ` Chris Packham 2021-05-25 18:49 ` wsa 2021-05-25 18:49 ` wsa 2021-05-25 18:53 ` Wolfram Sang 2021-05-25 18:53 ` Wolfram Sang 2021-05-26 1:02 ` Michael Ellerman 2021-05-26 1:02 ` Michael Ellerman 2021-05-27 19:53 ` Wolfram Sang 2021-05-27 19:53 ` Wolfram Sang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=874keqi9yq.fsf@mpe.ellerman.id.au \ --to=mpe@ellerman.id.au \ --cc=andriy.shevchenko@linux.intel.com \ --cc=andy.shevchenko@gmail.com \ --cc=benh@kernel.crashing.org \ --cc=chris.packham@alliedtelesis.co.nz \ --cc=devicetree@vger.kernel.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=paulus@samba.org \ --cc=robh+dt@kernel.org \ --cc=wsa@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.