All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
To: Alex Riesen <alexander.riesen@cetitec.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Kieran Bingham <kieran.bingham@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Driver Development <devel@driverdev.osuosl.org>,
	Linux Media <linux-media@vger.kernel.org>,
	Linux Kernel <linux-kernel@vger.kernel.org>,
	Device Tree <devicetree@vger.kernel.org>,
	Renesas SoC <linux-renesas-soc@vger.kernel.org>
Subject: Re: [PATCH 8/8] arm64: dts: renesas: salvator: add a connection from adv748x codec (HDMI input) to the R-Car SoC
Date: 10 Mar 2020 10:07:23 +0900	[thread overview]
Message-ID: <87a74pvwz8.wl-kuninori.morimoto.gx@renesas.com> (raw)
In-Reply-To: <20200309110931.GB3593@pflmari>


Hi Alex

> Should the adv748x driver also implement anything to configure the frequency
> of MCLK clock? I mean something like .set_sysclk and .set_fmt callbacks of
> snd_soc_dai_ops?
> 
> Or is the driver implementation, which depends on mclk-fs to be 256, the audio
> stream format to be 8x S24_LE, and requires strictly 48kHz sampling rate on
> the HDMI input, a totally acceptable first attempt at writing a DAI driver?
> 
> I'm a bit bothered by that, as the hardware is also capable of decoding
> stereo, sampling rate 32-192kHz, a variety of PCM and compressed/encrypted
> formats, 128-768fs MCLK multipliers, and a row of I2S options.
> 
> I just find it confusing to place the configuration interfaces.
> For instance, the patches use the media ioctl for audio output selection to
> select I2S protocol. While works, it does not feel right (shouldn't it be in
> the device tree?)
> 
> Maybe you can point me at a driver doing something similar? I'm studying media
> drivers now, but not many of them use ASoC interfaces for devices providing a
> clock. Or maybe I should better look at sound/soc/...?

Setting Sound Clock for all cases/patterns are very complex and difficult actually.
(ADV7482 configuration) x (ADG divider / selector) x etc, etc...

Thus, Current R-Car sound is assuming that audio_clk_a/b/c/i are providing
route clock (= no configuration, fixed clock), and ADG divides it,
and provide best clock to each SSIx.

Current Salvator/ULCB already have 44.1/48kHz route clock (= CS2000 and Audio_CLK_A),
and we can reuse it for all SSIx. Thus, ADV7482 clock is not necessary, I guess ?
Or providing specific clock for some case is enough
(ADG will automatically select it if necessary).

If ADV7482 needs more detail clock settings combination,
then, there is no method to adjust to it.
We need to consider such system somehow.

Thank you for your help !!

Best regards
---
Kuninori Morimoto

WARNING: multiple messages have this Message-ID
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
To: Alex Riesen <alexander.riesen@cetitec.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Driver Development <devel@driverdev.osuosl.org>,
	Device Tree <devicetree@vger.kernel.org>,
	Kieran Bingham <kieran.bingham@ideasonboard.com>,
	Linux Kernel <linux-kernel@vger.kernel.org>,
	Renesas SoC <linux-renesas-soc@vger.kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Linux Media <linux-media@vger.kernel.org>
Subject: Re: [PATCH 8/8] arm64: dts: renesas: salvator: add a connection from adv748x codec (HDMI input) to the R-Car SoC
Date: 10 Mar 2020 10:07:23 +0900	[thread overview]
Message-ID: <87a74pvwz8.wl-kuninori.morimoto.gx@renesas.com> (raw)
In-Reply-To: <20200309110931.GB3593@pflmari>


Hi Alex

> Should the adv748x driver also implement anything to configure the frequency
> of MCLK clock? I mean something like .set_sysclk and .set_fmt callbacks of
> snd_soc_dai_ops?
> 
> Or is the driver implementation, which depends on mclk-fs to be 256, the audio
> stream format to be 8x S24_LE, and requires strictly 48kHz sampling rate on
> the HDMI input, a totally acceptable first attempt at writing a DAI driver?
> 
> I'm a bit bothered by that, as the hardware is also capable of decoding
> stereo, sampling rate 32-192kHz, a variety of PCM and compressed/encrypted
> formats, 128-768fs MCLK multipliers, and a row of I2S options.
> 
> I just find it confusing to place the configuration interfaces.
> For instance, the patches use the media ioctl for audio output selection to
> select I2S protocol. While works, it does not feel right (shouldn't it be in
> the device tree?)
> 
> Maybe you can point me at a driver doing something similar? I'm studying media
> drivers now, but not many of them use ASoC interfaces for devices providing a
> clock. Or maybe I should better look at sound/soc/...?

Setting Sound Clock for all cases/patterns are very complex and difficult actually.
(ADV7482 configuration) x (ADG divider / selector) x etc, etc...

Thus, Current R-Car sound is assuming that audio_clk_a/b/c/i are providing
route clock (= no configuration, fixed clock), and ADG divides it,
and provide best clock to each SSIx.

Current Salvator/ULCB already have 44.1/48kHz route clock (= CS2000 and Audio_CLK_A),
and we can reuse it for all SSIx. Thus, ADV7482 clock is not necessary, I guess ?
Or providing specific clock for some case is enough
(ADG will automatically select it if necessary).

If ADV7482 needs more detail clock settings combination,
then, there is no method to adjust to it.
We need to consider such system somehow.

Thank you for your help !!

Best regards
---
Kuninori Morimoto
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  reply	other threads:[~2020-03-10  1:07 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-13 14:19 [PATCH 0/8] media: i2c: adv748x: add support for HDMI audio Alex Riesen
2020-01-13 14:19 ` Alex Riesen
2020-01-13 14:15 ` [PATCH 1/8] media: adv748x: add a device-specific wrapper for register block read Alex Riesen
2020-01-13 14:15   ` Alex Riesen
2020-01-13 14:15 ` [PATCH 2/8] media: adv748x: add audio mute control and output selection ioctls Alex Riesen
2020-01-13 14:15   ` Alex Riesen
2020-03-13  8:16   ` Hans Verkuil
2020-03-13  8:16     ` Hans Verkuil
2020-03-13 10:26     ` Alex Riesen
2020-03-13 10:26       ` Alex Riesen
2020-03-13 10:52       ` Hans Verkuil
2020-03-13 10:52         ` Hans Verkuil
2020-03-13 11:00         ` Alex Riesen
2020-03-13 11:00           ` Alex Riesen
2020-01-13 14:15 ` [PATCH 3/8] media: adv748x: add log_status ioctl Alex Riesen
2020-01-13 14:15   ` Alex Riesen
2020-01-13 14:15 ` [PATCH 4/8] media: adv748x: reserve space for the audio (I2S) port in the driver structures Alex Riesen
2020-01-13 14:15   ` Alex Riesen
2020-01-13 14:15 ` [PATCH 5/8] media: adv748x: add an ASoC DAI definition to the driver Alex Riesen
2020-01-13 14:15   ` Alex Riesen
2020-01-13 14:15 ` [PATCH 6/8] media: adv748x: reduce amount of code for bitwise modification of device registers Alex Riesen
2020-01-13 14:15   ` Alex Riesen
2020-01-13 14:15 ` [PATCH 7/8] dt-bindings: adv748x: add information about serial audio interface (I2S/TDM) Alex Riesen
2020-01-13 14:15   ` Alex Riesen
2020-01-13 22:32   ` Rob Herring
2020-01-13 22:32     ` Rob Herring
2020-01-13 14:15 ` [PATCH 8/8] arm64: dts: renesas: salvator: add a connection from adv748x codec (HDMI input) to the R-Car SoC Alex Riesen
2020-01-13 14:15   ` Alex Riesen
2020-03-02 12:28   ` Geert Uytterhoeven
2020-03-02 12:28     ` Geert Uytterhoeven
2020-03-02 13:40     ` Alex Riesen
2020-03-02 13:40       ` Alex Riesen
2020-03-02 13:47       ` Geert Uytterhoeven
2020-03-02 13:47         ` Geert Uytterhoeven
2020-03-02 15:07         ` Alex Riesen
2020-03-02 15:07           ` Alex Riesen
2020-03-02 15:32           ` Geert Uytterhoeven
2020-03-02 15:32             ` Geert Uytterhoeven
2020-03-02 16:09             ` Alex Riesen
2020-03-02 16:09               ` Alex Riesen
2020-03-02 16:13               ` Geert Uytterhoeven
2020-03-02 16:13                 ` Geert Uytterhoeven
2020-03-05 14:36                 ` Alex Riesen
2020-03-05 14:36                   ` Alex Riesen
2020-03-06 12:21                   ` Geert Uytterhoeven
2020-03-06 12:21                     ` Geert Uytterhoeven
2020-03-06 13:16                   ` Laurent Pinchart
2020-03-06 13:16                     ` Laurent Pinchart
2020-03-06 13:41                     ` Alex Riesen
2020-03-06 13:41                       ` Alex Riesen
2020-03-06 13:45                       ` Laurent Pinchart
2020-03-06 13:45                         ` Laurent Pinchart
2020-03-09  1:31                         ` Kuninori Morimoto
2020-03-09  1:31                           ` Kuninori Morimoto
2020-03-09 11:09                           ` Alex Riesen
2020-03-09 11:09                             ` Alex Riesen
2020-03-10  1:07                             ` Kuninori Morimoto [this message]
2020-03-10  1:07                               ` Kuninori Morimoto
2020-03-10  8:17                               ` Alex Riesen
2020-03-10  8:17                                 ` Alex Riesen
2020-03-10 10:39                                 ` Laurent Pinchart
2020-03-10 10:39                                   ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87a74pvwz8.wl-kuninori.morimoto.gx@renesas.com \
    --to=kuninori.morimoto.gx@renesas.com \
    --cc=alexander.riesen@cetitec.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert@linux-m68k.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH 8/8] arm64: dts: renesas: salvator: add a connection from adv748x codec (HDMI input) to the R-Car SoC' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.