[PATCH v4 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH v4 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation
@ 2020-10-29  0:04 ` Kuninori Morimoto
  0 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-10-29  0:04 UTC (permalink / raw)
  To: Rob Herring, Mark Brown; +Cc: alsa-devel, devicetree, Sameer Pujar


Hi Rob, Mark
Cc: Sameer

These are v4 of switch to yaml base Documentation for
audio-graph-card and renesas,rsnd which uses audio-graph-card.

v3 -> v4
	- fixuped yamllint warnings/errors

v2 -> v3
	- fixuped Rob's pointed points

v1 -> v2
	- upgrade dt-schema, and fixup errors for [2/2] patch

Kuninori Morimoto (3):
  dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
  dt-bindings: ASoC: renesas,rsnd: switch to yaml base Documentation
  dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support

 .../bindings/sound/audio-graph-card.txt       | 337 ------------
 .../bindings/sound/audio-graph-card.yaml      | 165 ++++++
 .../bindings/sound/renesas,rsnd.txt           | 520 ------------------
 .../bindings/sound/renesas,rsnd.yaml          | 457 +++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +-
 5 files changed, 623 insertions(+), 858 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
 create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml

-- 
2.25.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v4 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation
@ 2020-10-29  0:04 ` Kuninori Morimoto
  0 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-10-29  0:04 UTC (permalink / raw)
  To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar


Hi Rob, Mark
Cc: Sameer

These are v4 of switch to yaml base Documentation for
audio-graph-card and renesas,rsnd which uses audio-graph-card.

v3 -> v4
	- fixuped yamllint warnings/errors

v2 -> v3
	- fixuped Rob's pointed points

v1 -> v2
	- upgrade dt-schema, and fixup errors for [2/2] patch

Kuninori Morimoto (3):
  dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
  dt-bindings: ASoC: renesas,rsnd: switch to yaml base Documentation
  dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support

 .../bindings/sound/audio-graph-card.txt       | 337 ------------
 .../bindings/sound/audio-graph-card.yaml      | 165 ++++++
 .../bindings/sound/renesas,rsnd.txt           | 520 ------------------
 .../bindings/sound/renesas,rsnd.yaml          | 457 +++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +-
 5 files changed, 623 insertions(+), 858 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
 create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml

-- 
2.25.1


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v4 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
  2020-10-29  0:04 ` Kuninori Morimoto
@ 2020-10-29  0:05   ` Kuninori Morimoto
  -1 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-10-29  0:05 UTC (permalink / raw)
  To: Rob Herring, Mark Brown; +Cc: alsa-devel, devicetree, Sameer Pujar

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch switches from .txt base to .yaml base Document.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 .../bindings/sound/audio-graph-card.txt       | 337 ------------------
 .../bindings/sound/audio-graph-card.yaml      | 165 +++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +-
 3 files changed, 166 insertions(+), 338 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
 create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml

diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
deleted file mode 100644
index d5f6919a2d69..000000000000
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ /dev/null
@@ -1,337 +0,0 @@
-Audio Graph Card:
-
-Audio Graph Card specifies audio DAI connections of SoC <-> codec.
-It is based on common bindings for device graphs.
-see ${LINUX}/Documentation/devicetree/bindings/graph.txt
-
-Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
-
-Below are same as Simple-Card.
-
-- label
-- widgets
-- routing
-- dai-format
-- frame-master
-- bitclock-master
-- bitclock-inversion
-- frame-inversion
-- mclk-fs
-- hp-det-gpio
-- mic-det-gpio
-- dai-tdm-slot-num
-- dai-tdm-slot-width
-- clocks / system-clock-frequency
-
-Required properties:
-
-- compatible				: "audio-graph-card";
-- dais					: list of CPU DAI port{s}
-
-Optional properties:
-- pa-gpios: GPIO used to control external amplifier.
-
------------------------
-Example: Single DAI case
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		dais = <&cpu_port>;
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint: endpoint {
-				remote-endpoint = <&codec_endpoint>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
-	audio-codec {
-		...
-		port {
-			codec_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint>;
-			};
-		};
-	};
-
------------------------
-Example: Multi DAI case
------------------------
-
-	sound-card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-
-		dais = <&cpu_port0
-			&cpu_port1
-			&cpu_port2>;
-	};
-
-	audio-codec@0 {
-		...
-		port {
-			codec0_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint0>;
-			};
-		};
-	};
-
-	audio-codec@1 {
-		...
-		port {
-			codec1_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint1>;
-			};
-		};
-	};
-
-	audio-codec@2 {
-		...
-		port {
-			codec2_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint2>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		ports {
-			cpu_port0: port@0 {
-				cpu_endpoint0: endpoint {
-					remote-endpoint = <&codec0_endpoint>;
-
-					dai-format = "left_j";
-					...
-				};
-			};
-			cpu_port1: port@1 {
-				cpu_endpoint1: endpoint {
-					remote-endpoint = <&codec1_endpoint>;
-
-					dai-format = "i2s";
-					...
-				};
-			};
-			cpu_port2: port@2 {
-				cpu_endpoint2: endpoint {
-					remote-endpoint = <&codec2_endpoint>;
-
-					dai-format = "i2s";
-					...
-				};
-			};
-		};
-	};
-
-
------------------------
-Example: Sampling Rate Conversion
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-		prefix = "codec";
-		routing = "codec Playback", "DAI0 Playback",
-			  "DAI0 Capture",   "codec Capture";
-		convert-rate = <48000>;
-
-		dais = <&cpu_port>;
-	};
-
-	audio-codec {
-		...
-		port {
-			codec_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint: endpoint {
-				remote-endpoint = <&codec_endpoint>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
------------------------
-Example: 2 CPU 1 Codec (Mixing)
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-		routing = "codec Playback", "DAI0 Playback",
-			  "codec Playback", "DAI1 Playback",
-			  "DAI0 Capture",   "codec Capture";
-
-		dais = <&cpu_port>;
-	};
-
-	audio-codec {
-		...
-
-		audio-graph-card,prefix = "codec";
-		audio-graph-card,convert-rate = <48000>;
-		port {
-			reg = <0>;
-			codec_endpoint0: endpoint@0 {
-				remote-endpoint = <&cpu_endpoint0>;
-			};
-			codec_endpoint1: endpoint@1 {
-				remote-endpoint = <&cpu_endpoint1>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint0: endpoint@0 {
-				remote-endpoint = <&codec_endpoint0>;
-
-				dai-format = "left_j";
-				...
-			};
-			cpu_endpoint1: endpoint@1 {
-				remote-endpoint = <&codec_endpoint1>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
------------------------
-Example: Multi DAI with DPCM
------------------------
-
-	CPU0 ------ ak4613
-	CPU1 ------ HDMI
-	CPU2 ------ PCM3168A-p	/* DPCM 1ch/2ch */
-	CPU3 --/		/* DPCM 3ch/4ch */
-	CPU4 --/		/* DPCM 5ch/6ch */
-	CPU5 --/		/* DPCM 7ch/8ch */
-	CPU6 ------ PCM3168A-c
-
-	sound_card: sound {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-
-		routing =	"pcm3168a Playback", "DAI2 Playback",
-				"pcm3168a Playback", "DAI3 Playback",
-				"pcm3168a Playback", "DAI4 Playback",
-				"pcm3168a Playback", "DAI5 Playback";
-
-		dais = <&snd_port0	/* ak4613 */
-			&snd_port1	/* HDMI0  */
-			&snd_port2	/* pcm3168a playback */
-			&snd_port3	/* pcm3168a capture  */
-			>;
-	};
-
-	ak4613: codec@10 {
-		...
-		port {
-			ak4613_endpoint: endpoint {
-				remote-endpoint = <&rsnd_endpoint0>;
-			};
-		};
-	};
-
-	pcm3168a: audio-codec@44 {
-		...
-		audio-graph-card,prefix = "pcm3168a";
-		audio-graph-card,convert-channels = <8>; /* TDM Split */
-		ports {
-			port@0 {
-				reg = <0>;
-				pcm3168a_endpoint_p1: endpoint@1 {
-					remote-endpoint = <&rsnd_endpoint2>;
-					...
-				};
-				pcm3168a_endpoint_p2: endpoint@2 {
-					remote-endpoint = <&rsnd_endpoint3>;
-					...
-				};
-				pcm3168a_endpoint_p3: endpoint@3 {
-					remote-endpoint = <&rsnd_endpoint4>;
-					...
-				};
-				pcm3168a_endpoint_p4: endpoint@4 {
-					remote-endpoint = <&rsnd_endpoint5>;
-					...
-				};
-			};
-			port@1 {
-				reg = <1>;
-				pcm3168a_endpoint_c: endpoint {
-					remote-endpoint = <&rsnd_endpoint6>;
-					...
-				};
-			};
-		};
-	};
-
-	&sound {
-		ports {
-			snd_port0: port@0 {
-				rsnd_endpoint0: endpoint {
-					remote-endpoint = <&ak4613_endpoint>;
-					...
-				};
-			};
-			snd_port1: port@1 {
-				rsnd_endpoint1: endpoint {
-					remote-endpoint = <&dw_hdmi0_snd_in>;
-					...
-				};
-			};
-			snd_port2: port@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rsnd_endpoint2: endpoint@2 {
-					remote-endpoint = <&pcm3168a_endpoint_p1>;
-					...
-				};
-				rsnd_endpoint3: endpoint@3 {
-					remote-endpoint = <&pcm3168a_endpoint_p2>;
-					...
-				};
-				rsnd_endpoint4: endpoint@4 {
-					remote-endpoint = <&pcm3168a_endpoint_p3>;
-					...
-				};
-				rsnd_endpoint5: endpoint@5 {
-					remote-endpoint = <&pcm3168a_endpoint_p4>;
-					...
-				};
-			};
-			snd_port3: port@6 {
-				rsnd_endpoint6: endpoint {
-					remote-endpoint = <&pcm3168a_endpoint_c>;
-					...
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
new file mode 100644
index 000000000000..9ccffbda86a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card Driver Device Tree Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - audio-graph-card
+      - audio-graph-scu-card
+
+  dais:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+  label:
+    maxItems: 1
+  prefix:
+    description: "device name prefix"
+    $ref: /schemas/types.yaml#/definitions/string
+  "audio-graph-card,prefix":
+    description: "device name prefix"
+    $ref: /schemas/types.yaml#/definitions/string
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  convert-rate:
+    description: CPU to Codec rate convert.
+    $ref: /schemas/types.yaml#/definitions/uint32
+  "audio-graph-card,convert-rate":
+    description: CPU to Codec rate convert.
+    $ref: /schemas/types.yaml#/definitions/uint32
+  convert-channels:
+    description: CPU to Codec rate channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+  "audio-graph-card,convert-channels":
+    description: CPU to Codec rate channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+  pa-gpios:
+    maxItems: 1
+  hp-det-gpio:
+    maxItems: 1
+  mic-det-gpio:
+    maxItems: 1
+
+  endpoint:
+    type: object
+    properties:
+      remote-endpoint:
+        maxItems: 1
+      mclk-fs:
+        description: |
+          Multiplication factor between stream rate and codec mclk.
+          When defined, mclk-fs property defined in dai-link sub nodes are ignored.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      frame-inversion:
+        description: dai-link uses frame clock inversion
+        $ref: /schemas/types.yaml#/definitions/flag
+      bitclock-inversion:
+        description: dai-link uses bit clock inversion
+        $ref: /schemas/types.yaml#/definitions/flag
+      frame-master:
+        description: Indicates dai-link frame master.
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
+      bitclock-master:
+        description: Indicates dai-link bit clock master
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
+      dai-format:
+        description: audio format.
+        items:
+          enum:
+            - i2s
+            - right_j
+            - left_j
+            - dsp_a
+            - dsp_b
+            - ac97
+            - pdm
+            - msb
+            - lsb
+      convert-rate:
+        description: CPU to Codec rate convert.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      convert-channels:
+        description: CPU to Codec rate channels.
+        $ref: /schemas/types.yaml#/definitions/uint32
+    required:
+      - remote-endpoint
+
+  port:
+    description: single OF-Graph subnode
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+      prefix:
+        description: "device name prefix"
+        $ref: /schemas/types.yaml#/definitions/string
+      convert-rate:
+        description: CPU to Codec rate convert.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      convert-channels:
+        description: CPU to Codec rate channels.
+        $ref: /schemas/types.yaml#/definitions/uint32
+    patternProperties:
+      "^endpoint(@[0-9a-f]+)?":
+        $ref: "#/properties/endpoint"
+
+  ports:
+    description: multi OF-Graph subnode
+    type: object
+    patternProperties:
+      "^port(@[0-9a-f]+)?":
+        $ref: "#/properties/port"
+
+required:
+  - compatible
+  - dais
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "audio-graph-card";
+
+        dais = <&cpu_port_a>;
+    };
+
+    cpu {
+        /*
+         * dai-controller own settings
+         */
+
+        port {
+            cpu_endpoint: endpoint {
+                remote-endpoint = <&codec_endpoint>;
+                dai-format = "left_j";
+            };
+        };
+    };
+
+    codec {
+        /*
+         * codec own settings
+         */
+
+        port {
+            codec_endpoint: endpoint {
+                remote-endpoint = <&cpu_endpoint>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 2735be1a8470..a4fe8f6cec6c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -20,7 +20,7 @@ patternProperties:
   "^(keypad|m25p|max8952|max8997|max8998|mpmc),.*": true
   "^(pinctrl-single|#pinctrl-single|PowerPC),.*": true
   "^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true
-  "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true
+  "^(simple-audio-card|audio-graph-card|st-plgpio|st-spics|ts),.*": true
 
   # Keep list in alphabetical order.
   "^70mai,.*":
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
@ 2020-10-29  0:05   ` Kuninori Morimoto
  0 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-10-29  0:05 UTC (permalink / raw)
  To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch switches from .txt base to .yaml base Document.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 .../bindings/sound/audio-graph-card.txt       | 337 ------------------
 .../bindings/sound/audio-graph-card.yaml      | 165 +++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +-
 3 files changed, 166 insertions(+), 338 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
 create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml

diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
deleted file mode 100644
index d5f6919a2d69..000000000000
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ /dev/null
@@ -1,337 +0,0 @@
-Audio Graph Card:
-
-Audio Graph Card specifies audio DAI connections of SoC <-> codec.
-It is based on common bindings for device graphs.
-see ${LINUX}/Documentation/devicetree/bindings/graph.txt
-
-Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
-
-Below are same as Simple-Card.
-
-- label
-- widgets
-- routing
-- dai-format
-- frame-master
-- bitclock-master
-- bitclock-inversion
-- frame-inversion
-- mclk-fs
-- hp-det-gpio
-- mic-det-gpio
-- dai-tdm-slot-num
-- dai-tdm-slot-width
-- clocks / system-clock-frequency
-
-Required properties:
-
-- compatible				: "audio-graph-card";
-- dais					: list of CPU DAI port{s}
-
-Optional properties:
-- pa-gpios: GPIO used to control external amplifier.
-
------------------------
-Example: Single DAI case
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		dais = <&cpu_port>;
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint: endpoint {
-				remote-endpoint = <&codec_endpoint>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
-	audio-codec {
-		...
-		port {
-			codec_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint>;
-			};
-		};
-	};
-
------------------------
-Example: Multi DAI case
------------------------
-
-	sound-card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-
-		dais = <&cpu_port0
-			&cpu_port1
-			&cpu_port2>;
-	};
-
-	audio-codec@0 {
-		...
-		port {
-			codec0_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint0>;
-			};
-		};
-	};
-
-	audio-codec@1 {
-		...
-		port {
-			codec1_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint1>;
-			};
-		};
-	};
-
-	audio-codec@2 {
-		...
-		port {
-			codec2_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint2>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		ports {
-			cpu_port0: port@0 {
-				cpu_endpoint0: endpoint {
-					remote-endpoint = <&codec0_endpoint>;
-
-					dai-format = "left_j";
-					...
-				};
-			};
-			cpu_port1: port@1 {
-				cpu_endpoint1: endpoint {
-					remote-endpoint = <&codec1_endpoint>;
-
-					dai-format = "i2s";
-					...
-				};
-			};
-			cpu_port2: port@2 {
-				cpu_endpoint2: endpoint {
-					remote-endpoint = <&codec2_endpoint>;
-
-					dai-format = "i2s";
-					...
-				};
-			};
-		};
-	};
-
-
------------------------
-Example: Sampling Rate Conversion
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-		prefix = "codec";
-		routing = "codec Playback", "DAI0 Playback",
-			  "DAI0 Capture",   "codec Capture";
-		convert-rate = <48000>;
-
-		dais = <&cpu_port>;
-	};
-
-	audio-codec {
-		...
-		port {
-			codec_endpoint: endpoint {
-				remote-endpoint = <&cpu_endpoint>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint: endpoint {
-				remote-endpoint = <&codec_endpoint>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
------------------------
-Example: 2 CPU 1 Codec (Mixing)
------------------------
-
-	sound_card {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-		routing = "codec Playback", "DAI0 Playback",
-			  "codec Playback", "DAI1 Playback",
-			  "DAI0 Capture",   "codec Capture";
-
-		dais = <&cpu_port>;
-	};
-
-	audio-codec {
-		...
-
-		audio-graph-card,prefix = "codec";
-		audio-graph-card,convert-rate = <48000>;
-		port {
-			reg = <0>;
-			codec_endpoint0: endpoint@0 {
-				remote-endpoint = <&cpu_endpoint0>;
-			};
-			codec_endpoint1: endpoint@1 {
-				remote-endpoint = <&cpu_endpoint1>;
-			};
-		};
-	};
-
-	dai-controller {
-		...
-		cpu_port: port {
-			cpu_endpoint0: endpoint@0 {
-				remote-endpoint = <&codec_endpoint0>;
-
-				dai-format = "left_j";
-				...
-			};
-			cpu_endpoint1: endpoint@1 {
-				remote-endpoint = <&codec_endpoint1>;
-
-				dai-format = "left_j";
-				...
-			};
-		};
-	};
-
------------------------
-Example: Multi DAI with DPCM
------------------------
-
-	CPU0 ------ ak4613
-	CPU1 ------ HDMI
-	CPU2 ------ PCM3168A-p	/* DPCM 1ch/2ch */
-	CPU3 --/		/* DPCM 3ch/4ch */
-	CPU4 --/		/* DPCM 5ch/6ch */
-	CPU5 --/		/* DPCM 7ch/8ch */
-	CPU6 ------ PCM3168A-c
-
-	sound_card: sound {
-		compatible = "audio-graph-card";
-
-		label = "sound-card";
-
-		routing =	"pcm3168a Playback", "DAI2 Playback",
-				"pcm3168a Playback", "DAI3 Playback",
-				"pcm3168a Playback", "DAI4 Playback",
-				"pcm3168a Playback", "DAI5 Playback";
-
-		dais = <&snd_port0	/* ak4613 */
-			&snd_port1	/* HDMI0  */
-			&snd_port2	/* pcm3168a playback */
-			&snd_port3	/* pcm3168a capture  */
-			>;
-	};
-
-	ak4613: codec@10 {
-		...
-		port {
-			ak4613_endpoint: endpoint {
-				remote-endpoint = <&rsnd_endpoint0>;
-			};
-		};
-	};
-
-	pcm3168a: audio-codec@44 {
-		...
-		audio-graph-card,prefix = "pcm3168a";
-		audio-graph-card,convert-channels = <8>; /* TDM Split */
-		ports {
-			port@0 {
-				reg = <0>;
-				pcm3168a_endpoint_p1: endpoint@1 {
-					remote-endpoint = <&rsnd_endpoint2>;
-					...
-				};
-				pcm3168a_endpoint_p2: endpoint@2 {
-					remote-endpoint = <&rsnd_endpoint3>;
-					...
-				};
-				pcm3168a_endpoint_p3: endpoint@3 {
-					remote-endpoint = <&rsnd_endpoint4>;
-					...
-				};
-				pcm3168a_endpoint_p4: endpoint@4 {
-					remote-endpoint = <&rsnd_endpoint5>;
-					...
-				};
-			};
-			port@1 {
-				reg = <1>;
-				pcm3168a_endpoint_c: endpoint {
-					remote-endpoint = <&rsnd_endpoint6>;
-					...
-				};
-			};
-		};
-	};
-
-	&sound {
-		ports {
-			snd_port0: port@0 {
-				rsnd_endpoint0: endpoint {
-					remote-endpoint = <&ak4613_endpoint>;
-					...
-				};
-			};
-			snd_port1: port@1 {
-				rsnd_endpoint1: endpoint {
-					remote-endpoint = <&dw_hdmi0_snd_in>;
-					...
-				};
-			};
-			snd_port2: port@2 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				rsnd_endpoint2: endpoint@2 {
-					remote-endpoint = <&pcm3168a_endpoint_p1>;
-					...
-				};
-				rsnd_endpoint3: endpoint@3 {
-					remote-endpoint = <&pcm3168a_endpoint_p2>;
-					...
-				};
-				rsnd_endpoint4: endpoint@4 {
-					remote-endpoint = <&pcm3168a_endpoint_p3>;
-					...
-				};
-				rsnd_endpoint5: endpoint@5 {
-					remote-endpoint = <&pcm3168a_endpoint_p4>;
-					...
-				};
-			};
-			snd_port3: port@6 {
-				rsnd_endpoint6: endpoint {
-					remote-endpoint = <&pcm3168a_endpoint_c>;
-					...
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
new file mode 100644
index 000000000000..9ccffbda86a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card Driver Device Tree Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - audio-graph-card
+      - audio-graph-scu-card
+
+  dais:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+  label:
+    maxItems: 1
+  prefix:
+    description: "device name prefix"
+    $ref: /schemas/types.yaml#/definitions/string
+  "audio-graph-card,prefix":
+    description: "device name prefix"
+    $ref: /schemas/types.yaml#/definitions/string
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  widgets:
+    description: User specified audio sound widgets.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  convert-rate:
+    description: CPU to Codec rate convert.
+    $ref: /schemas/types.yaml#/definitions/uint32
+  "audio-graph-card,convert-rate":
+    description: CPU to Codec rate convert.
+    $ref: /schemas/types.yaml#/definitions/uint32
+  convert-channels:
+    description: CPU to Codec rate channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+  "audio-graph-card,convert-channels":
+    description: CPU to Codec rate channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+  pa-gpios:
+    maxItems: 1
+  hp-det-gpio:
+    maxItems: 1
+  mic-det-gpio:
+    maxItems: 1
+
+  endpoint:
+    type: object
+    properties:
+      remote-endpoint:
+        maxItems: 1
+      mclk-fs:
+        description: |
+          Multiplication factor between stream rate and codec mclk.
+          When defined, mclk-fs property defined in dai-link sub nodes are ignored.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      frame-inversion:
+        description: dai-link uses frame clock inversion
+        $ref: /schemas/types.yaml#/definitions/flag
+      bitclock-inversion:
+        description: dai-link uses bit clock inversion
+        $ref: /schemas/types.yaml#/definitions/flag
+      frame-master:
+        description: Indicates dai-link frame master.
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
+      bitclock-master:
+        description: Indicates dai-link bit clock master
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        maxItems: 1
+      dai-format:
+        description: audio format.
+        items:
+          enum:
+            - i2s
+            - right_j
+            - left_j
+            - dsp_a
+            - dsp_b
+            - ac97
+            - pdm
+            - msb
+            - lsb
+      convert-rate:
+        description: CPU to Codec rate convert.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      convert-channels:
+        description: CPU to Codec rate channels.
+        $ref: /schemas/types.yaml#/definitions/uint32
+    required:
+      - remote-endpoint
+
+  port:
+    description: single OF-Graph subnode
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+      prefix:
+        description: "device name prefix"
+        $ref: /schemas/types.yaml#/definitions/string
+      convert-rate:
+        description: CPU to Codec rate convert.
+        $ref: /schemas/types.yaml#/definitions/uint32
+      convert-channels:
+        description: CPU to Codec rate channels.
+        $ref: /schemas/types.yaml#/definitions/uint32
+    patternProperties:
+      "^endpoint(@[0-9a-f]+)?":
+        $ref: "#/properties/endpoint"
+
+  ports:
+    description: multi OF-Graph subnode
+    type: object
+    patternProperties:
+      "^port(@[0-9a-f]+)?":
+        $ref: "#/properties/port"
+
+required:
+  - compatible
+  - dais
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "audio-graph-card";
+
+        dais = <&cpu_port_a>;
+    };
+
+    cpu {
+        /*
+         * dai-controller own settings
+         */
+
+        port {
+            cpu_endpoint: endpoint {
+                remote-endpoint = <&codec_endpoint>;
+                dai-format = "left_j";
+            };
+        };
+    };
+
+    codec {
+        /*
+         * codec own settings
+         */
+
+        port {
+            codec_endpoint: endpoint {
+                remote-endpoint = <&cpu_endpoint>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 2735be1a8470..a4fe8f6cec6c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -20,7 +20,7 @@ patternProperties:
   "^(keypad|m25p|max8952|max8997|max8998|mpmc),.*": true
   "^(pinctrl-single|#pinctrl-single|PowerPC),.*": true
   "^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true
-  "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true
+  "^(simple-audio-card|audio-graph-card|st-plgpio|st-spics|ts),.*": true
 
   # Keep list in alphabetical order.
   "^70mai,.*":
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 2/3] dt-bindings: ASoC: renesas,rsnd: switch to yaml base Documentation
  2020-10-29  0:04 ` Kuninori Morimoto
@ 2020-10-29  0:05   ` Kuninori Morimoto
  -1 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-10-29  0:05 UTC (permalink / raw)
  To: Rob Herring, Mark Brown; +Cc: alsa-devel, devicetree, Sameer Pujar

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch switches from .txt base to .yaml base Document.
It is still keeping detail explanations at .txt

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 .../bindings/sound/renesas,rsnd.txt           | 520 ------------------
 .../bindings/sound/renesas,rsnd.yaml          | 456 +++++++++++++++
 2 files changed, 456 insertions(+), 520 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml

diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index b39743d3f7c4..b731f16aea84 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -253,523 +253,3 @@ This is example of TDM 6ch.
 Driver can automatically switches TDM <-> stereo mode in this case.
 
 see "Example: simple sound card for TDM"
-
-=============================================
-Required properties:
-=============================================
-
-- compatible			: "renesas,rcar_sound-<soctype>", fallbacks
-				  "renesas,rcar_sound-gen1" if generation1, and
-				  "renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
-				  "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
-				  Examples with soctypes are:
-				    - "renesas,rcar_sound-r8a7742" (RZ/G1H)
-				    - "renesas,rcar_sound-r8a7743" (RZ/G1M)
-				    - "renesas,rcar_sound-r8a7744" (RZ/G1N)
-				    - "renesas,rcar_sound-r8a7745" (RZ/G1E)
-				    - "renesas,rcar_sound-r8a77470" (RZ/G1C)
-				    - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
-				    - "renesas,rcar_sound-r8a774b1" (RZ/G2N)
-				    - "renesas,rcar_sound-r8a774c0" (RZ/G2E)
-				    - "renesas,rcar_sound-r8a774e1" (RZ/G2H)
-				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
-				    - "renesas,rcar_sound-r8a7779" (R-Car H1)
-				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
-				    - "renesas,rcar_sound-r8a7791" (R-Car M2-W)
-				    - "renesas,rcar_sound-r8a7793" (R-Car M2-N)
-				    - "renesas,rcar_sound-r8a7794" (R-Car E2)
-				    - "renesas,rcar_sound-r8a7795" (R-Car H3)
-				    - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
-				    - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
-				    - "renesas,rcar_sound-r8a77990" (R-Car E3)
-				    - "renesas,rcar_sound-r8a77995" (R-Car D3)
-- reg				: Should contain the register physical address.
-				  required register is
-				   SRU/ADG/SSI      if generation1
-				   SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3
-				   Select extended AUDIO-DMAC-periperi address if SoC has it,
-				   otherwise select normal AUDIO-DMAC-periperi address.
-- reg-names			: Should contain the register names.
-				   scu/adg/ssi	if generation1
-				   scu/adg/ssiu/ssi/audmapp if generation2/generation3
-- rcar_sound,ssi		: Should contain SSI feature.
-				  The number of SSI subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,ssiu		: Should contain SSIU feature.
-				  The number of SSIU subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,src		: Should contain SRC feature.
-				  The number of SRC subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,ctu		: Should contain CTU feature.
-				  The number of CTU subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,mix		: Should contain MIX feature.
-				  The number of MIX subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,dvc		: Should contain DVC feature.
-				  The number of DVC subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,dai		: DAI contents.
-				  The number of DAI subnode should be same as HW.
-				  see below for detail.
-- #sound-dai-cells		: it must be 0 if your system is using single DAI
-				  it must be 1 if your system is using multi  DAI
-- clocks			: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
-- clock-names			: List of necessary clock names.
-				  "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X",
-				  "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"
-
-Optional properties:
-- #clock-cells			: it must be 0 if your system has audio_clkout
-				  it must be 1 if your system has audio_clkout0/1/2/3
-- clock-frequency		: for all audio_clkout0/1/2/3
-- clkout-lr-asynchronous	: boolean property. it indicates that audio_clkoutn
-				  is asynchronizes with lr-clock.
-- resets			: References to SSI resets.
-- reset-names			: List of valid reset names.
-				  "ssi-all", "ssi.X"
-
-SSI subnode properties:
-- interrupts			: Should contain SSI interrupt for PIO transfer
-- shared-pin			: if shared clock pin
-- pio-transfer			: use PIO transfer mode
-- no-busif			: BUSIF is not ussed when [mem -> SSI] via DMA case
-- dma				: Should contain Audio DMAC entry
-- dma-names			: SSI  case "rx"  (=playback), "tx"  (=capture)
-				  Deprecated: see SSIU subnode properties
-				  SSIU case "rxu" (=playback), "txu" (=capture)
-
-SSIU subnode properties:
-- dma				: Should contain Audio DMAC entry
-- dma-names			: "rx" (=playback), "tx" (=capture)
-
-SRC subnode properties:
-- dma				: Should contain Audio DMAC entry
-- dma-names			: "rx" (=playback), "tx" (=capture)
-
-DVC subnode properties:
-- dma				: Should contain Audio DMAC entry
-- dma-names			: "tx" (=playback/capture)
-
-DAI subnode properties:
-- playback			: list of playback modules
-- capture			: list of capture  modules
-
-
-=============================================
-Example:
-=============================================
-
-rcar_sound: sound@ec500000 {
-	#sound-dai-cells = <1>;
-	compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
-	reg =	<0 0xec500000 0 0x1000>, /* SCU */
-		<0 0xec5a0000 0 0x100>,  /* ADG */
-		<0 0xec540000 0 0x1000>, /* SSIU */
-		<0 0xec541000 0 0x1280>, /* SSI */
-		<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
-	reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
-	clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
-		<&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
-		<&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
-		<&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
-		<&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
-		<&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
-		<&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
-		<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
-	clock-names = "ssi-all",
-			"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
-			"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
-			"src.9", "src.8", "src.7", "src.6", "src.5",
-			"src.4", "src.3", "src.2", "src.1", "src.0",
-			"dvc.0", "dvc.1",
-			"clk_a", "clk_b", "clk_c", "clk_i";
-
-	rcar_sound,dvc {
-		dvc0: dvc-0 {
-			dmas = <&audma0 0xbc>;
-			dma-names = "tx";
-		};
-		dvc1: dvc-1 {
-			dmas = <&audma0 0xbe>;
-			dma-names = "tx";
-		};
-	};
-
-	rcar_sound,mix {
-		mix0: mix-0 { };
-		mix1: mix-1 { };
-	};
-
-	rcar_sound,ctu {
-		ctu00: ctu-0 { };
-		ctu01: ctu-1 { };
-		ctu02: ctu-2 { };
-		ctu03: ctu-3 { };
-		ctu10: ctu-4 { };
-		ctu11: ctu-5 { };
-		ctu12: ctu-6 { };
-		ctu13: ctu-7 { };
-	};
-
-	rcar_sound,src {
-		src0: src-0 {
-			interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x85>, <&audma1 0x9a>;
-			dma-names = "rx", "tx";
-		};
-		src1: src-1 {
-			interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x87>, <&audma1 0x9c>;
-			dma-names = "rx", "tx";
-		};
-		src2: src-2 {
-			interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x89>, <&audma1 0x9e>;
-			dma-names = "rx", "tx";
-		};
-		src3: src-3 {
-			interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x8b>, <&audma1 0xa0>;
-			dma-names = "rx", "tx";
-		};
-		src4: src-4 {
-			interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x8d>, <&audma1 0xb0>;
-			dma-names = "rx", "tx";
-		};
-		src5: src-5 {
-			interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x8f>, <&audma1 0xb2>;
-			dma-names = "rx", "tx";
-		};
-		src6: src-6 {
-			interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x91>, <&audma1 0xb4>;
-			dma-names = "rx", "tx";
-		};
-		src7: src-7 {
-			interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x93>, <&audma1 0xb6>;
-			dma-names = "rx", "tx";
-		};
-		src8: src-8 {
-			interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x95>, <&audma1 0xb8>;
-			dma-names = "rx", "tx";
-		};
-		src9: src-9 {
-			interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x97>, <&audma1 0xba>;
-			dma-names = "rx", "tx";
-		};
-	};
-
-	rcar_sound,ssiu {
-		ssiu00: ssiu-0 {
-			dmas = <&audma0 0x15>, <&audma1 0x16>;
-			dma-names = "rx", "tx";
-		};
-		ssiu01: ssiu-1 {
-			dmas = <&audma0 0x35>, <&audma1 0x36>;
-			dma-names = "rx", "tx";
-		};
-
-		...
-
-		ssiu95: ssiu-49 {
-			dmas = <&audma0 0xA5>, <&audma1 0xA6>;
-			dma-names = "rx", "tx";
-		};
-		ssiu96: ssiu-50 {
-			dmas = <&audma0 0xA7>, <&audma1 0xA8>;
-			dma-names = "rx", "tx";
-		};
-		ssiu97: ssiu-51 {
-			dmas = <&audma0 0xA9>, <&audma1 0xAA>;
-			dma-names = "rx", "tx";
-		};
-	};
-
-	rcar_sound,ssi {
-		ssi0: ssi-0 {
-			interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x01>, <&audma1 0x02>;
-			dma-names = "rx", "tx";
-		};
-		ssi1: ssi-1 {
-			interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x03>, <&audma1 0x04>;
-			dma-names = "rx", "tx";
-		};
-
-		...
-
-		ssi8: ssi-8 {
-			interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x11>, <&audma1 0x12>;
-			dma-names = "rx", "tx";
-		};
-		ssi9: ssi-9 {
-			interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x13>, <&audma1 0x14>;
-			dma-names = "rx", "tx";
-		};
-	};
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi5 &src5>;
-			capture  = <&ssi6>;
-		};
-		dai1 {
-			playback = <&ssi3>;
-		};
-		dai2 {
-			capture  = <&ssi4>;
-		};
-		dai3 {
-			playback = <&ssi7>;
-		};
-		dai4 {
-			capture  = <&ssi8>;
-		};
-	};
-};
-
-=============================================
-Example: simple sound card
-=============================================
-
-	rsnd_ak4643: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&ak4643>;
-			clocks = <&audio_clock>;
-		};
-	};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins &sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0 &src2 &dvc0>;
-			capture  = <&ssi1 &src3 &dvc1>;
-		};
-	};
-};
-
-&ssi1 {
-	shared-pin;
-};
-
-=============================================
-Example: simple sound card for Asynchronous mode
-=============================================
-
-sound {
-	compatible = "simple-scu-audio-card";
-	...
-	/*
-	 * SRC Asynchronous mode setting
-	 * Playback:
-	 * All input data will be converted to 48kHz
-	 * Capture:
-	 * Inputed 48kHz data will be converted to
-	 * system specified Hz
-	 */
-	simple-audio-card,convert-rate = <48000>;
-	...
-	simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-	};
-	simple-audio-card,codec {
-		...
-	};
-};
-
-=============================================
-Example: simple sound card for channel convert
-=============================================
-
-sound {
-	compatible = "simple-scu-audio-card";
-	...
-	/*
-	 * CTU setting
-	 * All input data will be converted to 2ch
-	 * as output data
-	 */
-	simple-audio-card,convert-channels = <2>;
-	...
-	simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-	};
-	simple-audio-card,codec {
-		...
-	};
-};
-
-=============================================
-Example: simple sound card for MIXer
-=============================================
-
-sound {
-	compatible = "simple-scu-audio-card";
-	...
-	simple-audio-card,cpu@0 {
-		sound-dai = <&rcar_sound 0>;
-	};
-	simple-audio-card,cpu@1 {
-		sound-dai = <&rcar_sound 1>;
-	};
-	simple-audio-card,codec {
-		...
-	};
-};
-
-&rcar_sound {
-	...
-	rcar_sound,dai {
-		dai0 {
-			playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
-		};
-		dai1 {
-			playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
-		};
-	};
-};
-
-=============================================
-Example: simple sound card for TDM
-=============================================
-
-rsnd_tdm: sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&sndcodec>;
-	simple-audio-card,frame-master = <&sndcodec>;
-
-	sndcpu: simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-		dai-tdm-slot-num = <6>;
-	};
-
-	sndcodec: simple-audio-card,codec {
-		sound-dai = <&xxx>;
-	};
-};
-
-=============================================
-Example: simple sound card for TDM Split
-=============================================
-
-sound_card: sound {
-	compatible = "audio-graph-scu-card";
-	prefix = "xxxx";
-	routing = "xxxx Playback", "DAI0 Playback",
-		  "xxxx Playback", "DAI1 Playback",
-		  "xxxx Playback", "DAI2 Playback",
-		  "xxxx Playback", "DAI3 Playback";
-	convert-channels = <8>; /* TDM Split */
-
-	dais = <&rsnd_port0     /* playback ch1/ch2 */
-		&rsnd_port1     /* playback ch3/ch4 */
-		&rsnd_port2     /* playback ch5/ch6 */
-		&rsnd_port3     /* playback ch7/ch8 */
-		>;
-};
-
-audio-codec {
-	...
-	port {
-		codec_0: endpoint@1 {
-			remote-endpoint = <&rsnd_ep0>;
-		};
-		codec_1: endpoint@2 {
-			remote-endpoint = <&rsnd_ep1>;
-		};
-		codec_2: endpoint@3 {
-			remote-endpoint = <&rsnd_ep2>;
-		};
-		codec_3: endpoint@4 {
-			remote-endpoint = <&rsnd_ep3>;
-		};
-	};
-};
-
-&rcar_sound {
-	...
-	ports {
-		rsnd_port0: port@0 {
-			rsnd_ep0: endpoint {
-				remote-endpoint = <&codec_0>;
-				...
-				playback = <&ssiu30 &ssi3>;
-			};
-		};
-		rsnd_port1: port@1 {
-			rsnd_ep1: endpoint {
-				remote-endpoint = <&codec_1>;
-				...
-				playback = <&ssiu31 &ssi3>;
-			};
-		};
-		rsnd_port2: port@2 {
-			rsnd_ep2: endpoint {
-				remote-endpoint = <&codec_2>;
-				...
-				playback = <&ssiu32 &ssi3>;
-			};
-		};
-		rsnd_port3: port@3 {
-			rsnd_ep3: endpoint {
-				remote-endpoint = <&codec_3>;
-				...
-				playback = <&ssiu33 &ssi3>;
-			};
-		};
-	};
-};
-
-=============================================
-Example: simple sound card for Multi channel
-=============================================
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins &sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
new file mode 100644
index 000000000000..9be88c2e4f16
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -0,0 +1,456 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Sound Driver Device Tree Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+
+  compatible:
+    oneOf:
+      # for Gen1 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a7778   # R-Car M1A
+              - renesas,rcar_sound-r8a7779   # R-Car H1
+          - enum:
+              - renesas,rcar_sound-gen1
+      # for Gen2 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a7742   # RZ/G1H
+              - renesas,rcar_sound-r8a7743   # RZ/G1M
+              - renesas,rcar_sound-r8a7744   # RZ/G1N
+              - renesas,rcar_sound-r8a7745   # RZ/G1E
+              - renesas,rcar_sound-r8a77470  # RZ/G1C
+              - renesas,rcar_sound-r8a7790   # R-Car H2
+              - renesas,rcar_sound-r8a7791   # R-Car M2-W
+              - renesas,rcar_sound-r8a7793   # R-Car M2-N
+              - renesas,rcar_sound-r8a7794   # R-Car E2
+          - enum:
+              - renesas,rcar_sound-gen2
+      # for Gen3 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a774a1  # RZ/G2M
+              - renesas,rcar_sound-r8a774b1  # RZ/G2N
+              - renesas,rcar_sound-r8a774c0  # RZ/G2E
+              - renesas,rcar_sound-r8a774e1  # RZ/G2H
+              - renesas,rcar_sound-r8a7795   # R-Car H3
+              - renesas,rcar_sound-r8a7796   # R-Car M3-W
+              - renesas,rcar_sound-r8a77965  # R-Car M3-N
+              - renesas,rcar_sound-r8a77990  # R-Car E3
+              - renesas,rcar_sound-r8a77995  # R-Car D3
+          - enum:
+              - renesas,rcar_sound-gen3
+      # for Generic
+      - items:
+          - enum:
+              - renesas,rcar_sound-gen1
+              - renesas,rcar_sound-gen2
+              - renesas,rcar_sound-gen3
+
+  reg:
+    minItems: 1
+    maxItems: 5
+
+  reg-names:
+    minItems: 1
+    maxItems: 5
+
+  "#sound-dai-cells":
+    description: |
+      it must be 0 if your system is using single DAI
+      it must be 1 if your system is using multi  DAIs
+    enum: [0, 1]
+
+  "#clock-cells":
+    description: |
+      it must be 0 if your system has audio_clkout
+      it must be 1 if your system has audio_clkout0/1/2/3
+    enum: [0, 1]
+
+  clock-frequency:
+    description: for audio_clkout0/1/2/3
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clkout-lr-asynchronous:
+    description: audio_clkoutn is asynchronizes with lr-clock.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  power-domains: true
+
+  resets:
+    maxItems: 11
+
+  reset-names:
+    maxItems: 11
+
+  clocks:
+    description: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
+    minItems: 1
+    maxItems: 31
+
+  clock-names:
+    description: List of necessary clock names.
+    minItems: 1
+    maxItems: 31
+    items:
+      oneOf:
+        - const: ssi-all
+        - pattern: '^ssi\.[0-9]$'
+        - pattern: '^src\.[0-9]$'
+        - pattern: '^mix\.[0-1]$'
+        - pattern: '^ctu\.[0-1]$'
+        - pattern: '^dvc\.[0-1]$'
+        - pattern: '^clk_(a|b|c|i)$'
+
+  port:
+    description: OF-Graph subnode
+    $ref: "audio-graph-card.yaml#/properties/port"
+
+  ports:
+    description: multi OF-Graph subnode
+    $ref: "audio-graph-card.yaml#/properties/ports"
+
+# use patternProperties to avoid naming "xxx,yyy" issue
+patternProperties:
+  "^rcar_sound,dvc$":
+    description: DVC subnode.
+    type: object
+    patternProperties:
+      "^dvc-[0-1]$":
+        type: object
+        properties:
+          dmas:
+            maxItems: 1
+          dma-names:
+            const: "tx"
+        required:
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  "^rcar_sound,mix$":
+    description: MIX subnode.
+    type: object
+    patternProperties:
+      "^mix-[0-1]$":
+        type: object
+        # no propaties
+    additionalProperties: false
+
+  "^rcar_sound,ctu$":
+    description: CTU subnode.
+    type: object
+    patternProperties:
+      "^ctu-[0-7]$":
+        type: object
+        # no propaties
+    additionalProperties: false
+
+  "^rcar_sound,src$":
+    description: SRC subnode.
+    type: object
+    patternProperties:
+      "^src-[0-9]$":
+        type: object
+        properties:
+          interrupts:
+            maxItems: 1
+          dmas:
+            maxItems: 2
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+        allOf:
+          - if:
+              properties:
+                status:
+                  const: "ok"
+            then:
+              required:
+                - interrupts
+                - dmas
+                - dma-names
+    additionalProperties: false
+
+  "^rcar_sound,ssiu$":
+    description: SSIU subnode.
+    type: object
+    patternProperties:
+      "^ssiu-[0-9]+$":
+        type: object
+        properties:
+          dmas:
+            maxItems: 2
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+        required:
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  "^rcar_sound,ssi$":
+    description: SSI subnode.
+    type: object
+    patternProperties:
+      "^ssi-[0-9]$":
+        type: object
+        properties:
+          interrupts:
+            maxItems: 1
+          dmas:
+            minItems: 2
+            maxItems: 4
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+                    - txu # if no ssiu node
+                    - rxu # if no ssiu node
+
+          shared-pin:
+            description: shared clock pin
+            $ref: /schemas/types.yaml#/definitions/flag
+          pio-transfer:
+            description: PIO transfer mode
+            $ref: /schemas/types.yaml#/definitions/flag
+          no-busif:
+            description: BUSIF is not used when [mem -> SSI] via DMA case
+            $ref: /schemas/types.yaml#/definitions/flag
+        required:
+          - interrupts
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  # For DAI base
+  "^rcar_sound,dai$":
+    description: DAI subnode.
+    type: object
+    patternProperties:
+      "^dai([0-9]+)?$":
+        type: object
+        properties:
+          playback:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+          capture:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+        anyOf:
+          - required:
+              - playback
+          - required:
+              - capture
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - "#sound-dai-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar_sound-gen1
+    then:
+      properties:
+        reg:
+          maxItems: 3
+        reg-names:
+          maxItems: 3
+          items:
+            enum:
+              - scu
+              - ssi
+              - adg
+    else:
+      properties:
+        reg:
+          maxItems: 5
+        reg-names:
+          maxItems: 5
+          items:
+            enum:
+              - scu
+              - adg
+              - ssiu
+              - ssi
+              - audmapp
+
+additionalProperties: false
+
+examples:
+  - |
+    rcar_sound: sound@ec500000 {
+        #sound-dai-cells = <1>;
+        compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2";
+        reg = <0xec500000 0x1000>, /* SCU  */
+              <0xec5a0000 0x100>,  /* ADG  */
+              <0xec540000 0x1000>, /* SSIU */
+              <0xec541000 0x1280>, /* SSI  */
+              <0xec740000 0x200>;  /* Audio DMAC peri peri*/
+        reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+        clocks = <&mstp10_clks 1005>,                      /* SSI-ALL    */
+                 <&mstp10_clks 1006>, <&mstp10_clks 1007>, /* SSI9, SSI8 */
+                 <&mstp10_clks 1008>, <&mstp10_clks 1009>, /* SSI7, SSI6 */
+                 <&mstp10_clks 1010>, <&mstp10_clks 1011>, /* SSI5, SSI4 */
+                 <&mstp10_clks 1012>, <&mstp10_clks 1013>, /* SSI3, SSI2 */
+                 <&mstp10_clks 1014>, <&mstp10_clks 1015>, /* SSI1, SSI0 */
+                 <&mstp10_clks 1022>, <&mstp10_clks 1023>, /* SRC9, SRC8 */
+                 <&mstp10_clks 1024>, <&mstp10_clks 1025>, /* SRC7, SRC6 */
+                 <&mstp10_clks 1026>, <&mstp10_clks 1027>, /* SRC5, SRC4 */
+                 <&mstp10_clks 1028>, <&mstp10_clks 1029>, /* SRC3, SRC2 */
+                 <&mstp10_clks 1030>, <&mstp10_clks 1031>, /* SRC1, SRC0 */
+                 <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* MIX1, MIX0 */
+                 <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* CTU1, CTU0 */
+                 <&mstp10_clks 1019>, <&mstp10_clks 1018>, /* DVC0, DVC1 */
+                 <&audio_clk_a>, <&audio_clk_b>,           /* CLKA, CLKB */
+                 <&audio_clk_c>, <&audio_clk_i>;           /* CLKC, CLKI */
+
+        clock-names = "ssi-all",
+                      "ssi.9", "ssi.8",
+                      "ssi.7", "ssi.6",
+                      "ssi.5", "ssi.4",
+                      "ssi.3", "ssi.2",
+                      "ssi.1", "ssi.0",
+                      "src.9", "src.8",
+                      "src.7", "src.6",
+                      "src.5", "src.4",
+                      "src.3", "src.2",
+                      "src.1", "src.0",
+                      "mix.1", "mix.0",
+                      "ctu.1", "ctu.0",
+                      "dvc.0", "dvc.1",
+                      "clk_a", "clk_b",
+                      "clk_c", "clk_i";
+
+        rcar_sound,dvc {
+               dvc0: dvc-0 {
+                    dmas = <&audma0 0xbc>;
+                    dma-names = "tx";
+               };
+               dvc1: dvc-1 {
+                    dmas = <&audma0 0xbe>;
+                    dma-names = "tx";
+               };
+        };
+
+        rcar_sound,mix {
+            mix0: mix-0 { };
+            mix1: mix-1 { };
+        };
+
+        rcar_sound,ctu {
+            ctu00: ctu-0 { };
+            ctu01: ctu-1 { };
+            ctu02: ctu-2 { };
+            ctu03: ctu-3 { };
+            ctu10: ctu-4 { };
+            ctu11: ctu-5 { };
+            ctu12: ctu-6 { };
+            ctu13: ctu-7 { };
+        };
+
+        rcar_sound,src {
+            src0: src-0 {
+                status = "disabled";
+            };
+            src1: src-1 {
+                interrupts = <0 353 0>;
+                dmas = <&audma0 0x87>, <&audma1 0x9c>;
+                dma-names = "rx", "tx";
+            };
+            /* skip after src-2 */
+        };
+
+        rcar_sound,ssiu {
+            ssiu00: ssiu-0 {
+                dmas = <&audma0 0x15>, <&audma1 0x16>;
+                dma-names = "rx", "tx";
+            };
+            ssiu01: ssiu-1 {
+                dmas = <&audma0 0x35>, <&audma1 0x36>;
+                dma-names = "rx", "tx";
+            };
+            /* skip after ssiu-2 */
+        };
+
+        rcar_sound,ssi {
+            ssi0: ssi-0 {
+                interrupts = <0 370 1>;
+                dmas = <&audma0 0x01>, <&audma1 0x02>;
+                dma-names = "rx", "tx";
+            };
+            ssi1: ssi-1 {
+                interrupts = <0 371 1>;
+                dmas = <&audma0 0x03>, <&audma1 0x04>;
+                dma-names = "rx", "tx";
+            };
+            /* skip other ssi-2 */
+        };
+
+        /* DAI base */
+        rcar_sound,dai {
+            dai0 {
+                playback = <&ssi5 &src5>;
+                capture  = <&ssi6>;
+            };
+            dai1 {
+                playback = <&ssi3>;
+            };
+            dai2 {
+                capture  = <&ssi4>;
+            };
+            dai3 {
+                playback = <&ssi7>;
+            };
+            dai4 {
+                capture  = <&ssi8>;
+            };
+        };
+
+        /* assume audio-graph */
+        port {
+            rsnd_endpoint: endpoint {
+                remote-endpoint = <&codec_endpoint>;
+
+                dai-format = "left_j";
+                bitclock-master = <&rsnd_endpoint0>;
+                frame-master = <&rsnd_endpoint0>;
+
+                playback = <&ssi0 &src0 &dvc0>;
+                capture  = <&ssi1 &src1 &dvc1>;
+            };
+        };
+    };
+
+
+    /* assume audio-graph */
+    codec {
+        port {
+            codec_endpoint: endpoint {
+                remote-endpoint = <&rsnd_endpoint>;
+            };
+        };
+    };
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 2/3] dt-bindings: ASoC: renesas, rsnd: switch to yaml base Documentation
@ 2020-10-29  0:05   ` Kuninori Morimoto
  0 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-10-29  0:05 UTC (permalink / raw)
  To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch switches from .txt base to .yaml base Document.
It is still keeping detail explanations at .txt

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 .../bindings/sound/renesas,rsnd.txt           | 520 ------------------
 .../bindings/sound/renesas,rsnd.yaml          | 456 +++++++++++++++
 2 files changed, 456 insertions(+), 520 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml

diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index b39743d3f7c4..b731f16aea84 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -253,523 +253,3 @@ This is example of TDM 6ch.
 Driver can automatically switches TDM <-> stereo mode in this case.
 
 see "Example: simple sound card for TDM"
-
-=============================================
-Required properties:
-=============================================
-
-- compatible			: "renesas,rcar_sound-<soctype>", fallbacks
-				  "renesas,rcar_sound-gen1" if generation1, and
-				  "renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
-				  "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
-				  Examples with soctypes are:
-				    - "renesas,rcar_sound-r8a7742" (RZ/G1H)
-				    - "renesas,rcar_sound-r8a7743" (RZ/G1M)
-				    - "renesas,rcar_sound-r8a7744" (RZ/G1N)
-				    - "renesas,rcar_sound-r8a7745" (RZ/G1E)
-				    - "renesas,rcar_sound-r8a77470" (RZ/G1C)
-				    - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
-				    - "renesas,rcar_sound-r8a774b1" (RZ/G2N)
-				    - "renesas,rcar_sound-r8a774c0" (RZ/G2E)
-				    - "renesas,rcar_sound-r8a774e1" (RZ/G2H)
-				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
-				    - "renesas,rcar_sound-r8a7779" (R-Car H1)
-				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
-				    - "renesas,rcar_sound-r8a7791" (R-Car M2-W)
-				    - "renesas,rcar_sound-r8a7793" (R-Car M2-N)
-				    - "renesas,rcar_sound-r8a7794" (R-Car E2)
-				    - "renesas,rcar_sound-r8a7795" (R-Car H3)
-				    - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
-				    - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
-				    - "renesas,rcar_sound-r8a77990" (R-Car E3)
-				    - "renesas,rcar_sound-r8a77995" (R-Car D3)
-- reg				: Should contain the register physical address.
-				  required register is
-				   SRU/ADG/SSI      if generation1
-				   SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3
-				   Select extended AUDIO-DMAC-periperi address if SoC has it,
-				   otherwise select normal AUDIO-DMAC-periperi address.
-- reg-names			: Should contain the register names.
-				   scu/adg/ssi	if generation1
-				   scu/adg/ssiu/ssi/audmapp if generation2/generation3
-- rcar_sound,ssi		: Should contain SSI feature.
-				  The number of SSI subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,ssiu		: Should contain SSIU feature.
-				  The number of SSIU subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,src		: Should contain SRC feature.
-				  The number of SRC subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,ctu		: Should contain CTU feature.
-				  The number of CTU subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,mix		: Should contain MIX feature.
-				  The number of MIX subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,dvc		: Should contain DVC feature.
-				  The number of DVC subnode should be same as HW.
-				  see below for detail.
-- rcar_sound,dai		: DAI contents.
-				  The number of DAI subnode should be same as HW.
-				  see below for detail.
-- #sound-dai-cells		: it must be 0 if your system is using single DAI
-				  it must be 1 if your system is using multi  DAI
-- clocks			: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
-- clock-names			: List of necessary clock names.
-				  "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X",
-				  "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"
-
-Optional properties:
-- #clock-cells			: it must be 0 if your system has audio_clkout
-				  it must be 1 if your system has audio_clkout0/1/2/3
-- clock-frequency		: for all audio_clkout0/1/2/3
-- clkout-lr-asynchronous	: boolean property. it indicates that audio_clkoutn
-				  is asynchronizes with lr-clock.
-- resets			: References to SSI resets.
-- reset-names			: List of valid reset names.
-				  "ssi-all", "ssi.X"
-
-SSI subnode properties:
-- interrupts			: Should contain SSI interrupt for PIO transfer
-- shared-pin			: if shared clock pin
-- pio-transfer			: use PIO transfer mode
-- no-busif			: BUSIF is not ussed when [mem -> SSI] via DMA case
-- dma				: Should contain Audio DMAC entry
-- dma-names			: SSI  case "rx"  (=playback), "tx"  (=capture)
-				  Deprecated: see SSIU subnode properties
-				  SSIU case "rxu" (=playback), "txu" (=capture)
-
-SSIU subnode properties:
-- dma				: Should contain Audio DMAC entry
-- dma-names			: "rx" (=playback), "tx" (=capture)
-
-SRC subnode properties:
-- dma				: Should contain Audio DMAC entry
-- dma-names			: "rx" (=playback), "tx" (=capture)
-
-DVC subnode properties:
-- dma				: Should contain Audio DMAC entry
-- dma-names			: "tx" (=playback/capture)
-
-DAI subnode properties:
-- playback			: list of playback modules
-- capture			: list of capture  modules
-
-
-=============================================
-Example:
-=============================================
-
-rcar_sound: sound@ec500000 {
-	#sound-dai-cells = <1>;
-	compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
-	reg =	<0 0xec500000 0 0x1000>, /* SCU */
-		<0 0xec5a0000 0 0x100>,  /* ADG */
-		<0 0xec540000 0 0x1000>, /* SSIU */
-		<0 0xec541000 0 0x1280>, /* SSI */
-		<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
-	reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
-	clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
-		<&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
-		<&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
-		<&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
-		<&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
-		<&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
-		<&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
-		<&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
-		<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
-	clock-names = "ssi-all",
-			"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
-			"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
-			"src.9", "src.8", "src.7", "src.6", "src.5",
-			"src.4", "src.3", "src.2", "src.1", "src.0",
-			"dvc.0", "dvc.1",
-			"clk_a", "clk_b", "clk_c", "clk_i";
-
-	rcar_sound,dvc {
-		dvc0: dvc-0 {
-			dmas = <&audma0 0xbc>;
-			dma-names = "tx";
-		};
-		dvc1: dvc-1 {
-			dmas = <&audma0 0xbe>;
-			dma-names = "tx";
-		};
-	};
-
-	rcar_sound,mix {
-		mix0: mix-0 { };
-		mix1: mix-1 { };
-	};
-
-	rcar_sound,ctu {
-		ctu00: ctu-0 { };
-		ctu01: ctu-1 { };
-		ctu02: ctu-2 { };
-		ctu03: ctu-3 { };
-		ctu10: ctu-4 { };
-		ctu11: ctu-5 { };
-		ctu12: ctu-6 { };
-		ctu13: ctu-7 { };
-	};
-
-	rcar_sound,src {
-		src0: src-0 {
-			interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x85>, <&audma1 0x9a>;
-			dma-names = "rx", "tx";
-		};
-		src1: src-1 {
-			interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x87>, <&audma1 0x9c>;
-			dma-names = "rx", "tx";
-		};
-		src2: src-2 {
-			interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x89>, <&audma1 0x9e>;
-			dma-names = "rx", "tx";
-		};
-		src3: src-3 {
-			interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x8b>, <&audma1 0xa0>;
-			dma-names = "rx", "tx";
-		};
-		src4: src-4 {
-			interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x8d>, <&audma1 0xb0>;
-			dma-names = "rx", "tx";
-		};
-		src5: src-5 {
-			interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x8f>, <&audma1 0xb2>;
-			dma-names = "rx", "tx";
-		};
-		src6: src-6 {
-			interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x91>, <&audma1 0xb4>;
-			dma-names = "rx", "tx";
-		};
-		src7: src-7 {
-			interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x93>, <&audma1 0xb6>;
-			dma-names = "rx", "tx";
-		};
-		src8: src-8 {
-			interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x95>, <&audma1 0xb8>;
-			dma-names = "rx", "tx";
-		};
-		src9: src-9 {
-			interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x97>, <&audma1 0xba>;
-			dma-names = "rx", "tx";
-		};
-	};
-
-	rcar_sound,ssiu {
-		ssiu00: ssiu-0 {
-			dmas = <&audma0 0x15>, <&audma1 0x16>;
-			dma-names = "rx", "tx";
-		};
-		ssiu01: ssiu-1 {
-			dmas = <&audma0 0x35>, <&audma1 0x36>;
-			dma-names = "rx", "tx";
-		};
-
-		...
-
-		ssiu95: ssiu-49 {
-			dmas = <&audma0 0xA5>, <&audma1 0xA6>;
-			dma-names = "rx", "tx";
-		};
-		ssiu96: ssiu-50 {
-			dmas = <&audma0 0xA7>, <&audma1 0xA8>;
-			dma-names = "rx", "tx";
-		};
-		ssiu97: ssiu-51 {
-			dmas = <&audma0 0xA9>, <&audma1 0xAA>;
-			dma-names = "rx", "tx";
-		};
-	};
-
-	rcar_sound,ssi {
-		ssi0: ssi-0 {
-			interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x01>, <&audma1 0x02>;
-			dma-names = "rx", "tx";
-		};
-		ssi1: ssi-1 {
-			interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x03>, <&audma1 0x04>;
-			dma-names = "rx", "tx";
-		};
-
-		...
-
-		ssi8: ssi-8 {
-			interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x11>, <&audma1 0x12>;
-			dma-names = "rx", "tx";
-		};
-		ssi9: ssi-9 {
-			interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x13>, <&audma1 0x14>;
-			dma-names = "rx", "tx";
-		};
-	};
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi5 &src5>;
-			capture  = <&ssi6>;
-		};
-		dai1 {
-			playback = <&ssi3>;
-		};
-		dai2 {
-			capture  = <&ssi4>;
-		};
-		dai3 {
-			playback = <&ssi7>;
-		};
-		dai4 {
-			capture  = <&ssi8>;
-		};
-	};
-};
-
-=============================================
-Example: simple sound card
-=============================================
-
-	rsnd_ak4643: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&ak4643>;
-			clocks = <&audio_clock>;
-		};
-	};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins &sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0 &src2 &dvc0>;
-			capture  = <&ssi1 &src3 &dvc1>;
-		};
-	};
-};
-
-&ssi1 {
-	shared-pin;
-};
-
-=============================================
-Example: simple sound card for Asynchronous mode
-=============================================
-
-sound {
-	compatible = "simple-scu-audio-card";
-	...
-	/*
-	 * SRC Asynchronous mode setting
-	 * Playback:
-	 * All input data will be converted to 48kHz
-	 * Capture:
-	 * Inputed 48kHz data will be converted to
-	 * system specified Hz
-	 */
-	simple-audio-card,convert-rate = <48000>;
-	...
-	simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-	};
-	simple-audio-card,codec {
-		...
-	};
-};
-
-=============================================
-Example: simple sound card for channel convert
-=============================================
-
-sound {
-	compatible = "simple-scu-audio-card";
-	...
-	/*
-	 * CTU setting
-	 * All input data will be converted to 2ch
-	 * as output data
-	 */
-	simple-audio-card,convert-channels = <2>;
-	...
-	simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-	};
-	simple-audio-card,codec {
-		...
-	};
-};
-
-=============================================
-Example: simple sound card for MIXer
-=============================================
-
-sound {
-	compatible = "simple-scu-audio-card";
-	...
-	simple-audio-card,cpu@0 {
-		sound-dai = <&rcar_sound 0>;
-	};
-	simple-audio-card,cpu@1 {
-		sound-dai = <&rcar_sound 1>;
-	};
-	simple-audio-card,codec {
-		...
-	};
-};
-
-&rcar_sound {
-	...
-	rcar_sound,dai {
-		dai0 {
-			playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
-		};
-		dai1 {
-			playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
-		};
-	};
-};
-
-=============================================
-Example: simple sound card for TDM
-=============================================
-
-rsnd_tdm: sound {
-	compatible = "simple-audio-card";
-
-	simple-audio-card,format = "left_j";
-	simple-audio-card,bitclock-master = <&sndcodec>;
-	simple-audio-card,frame-master = <&sndcodec>;
-
-	sndcpu: simple-audio-card,cpu {
-		sound-dai = <&rcar_sound>;
-		dai-tdm-slot-num = <6>;
-	};
-
-	sndcodec: simple-audio-card,codec {
-		sound-dai = <&xxx>;
-	};
-};
-
-=============================================
-Example: simple sound card for TDM Split
-=============================================
-
-sound_card: sound {
-	compatible = "audio-graph-scu-card";
-	prefix = "xxxx";
-	routing = "xxxx Playback", "DAI0 Playback",
-		  "xxxx Playback", "DAI1 Playback",
-		  "xxxx Playback", "DAI2 Playback",
-		  "xxxx Playback", "DAI3 Playback";
-	convert-channels = <8>; /* TDM Split */
-
-	dais = <&rsnd_port0     /* playback ch1/ch2 */
-		&rsnd_port1     /* playback ch3/ch4 */
-		&rsnd_port2     /* playback ch5/ch6 */
-		&rsnd_port3     /* playback ch7/ch8 */
-		>;
-};
-
-audio-codec {
-	...
-	port {
-		codec_0: endpoint@1 {
-			remote-endpoint = <&rsnd_ep0>;
-		};
-		codec_1: endpoint@2 {
-			remote-endpoint = <&rsnd_ep1>;
-		};
-		codec_2: endpoint@3 {
-			remote-endpoint = <&rsnd_ep2>;
-		};
-		codec_3: endpoint@4 {
-			remote-endpoint = <&rsnd_ep3>;
-		};
-	};
-};
-
-&rcar_sound {
-	...
-	ports {
-		rsnd_port0: port@0 {
-			rsnd_ep0: endpoint {
-				remote-endpoint = <&codec_0>;
-				...
-				playback = <&ssiu30 &ssi3>;
-			};
-		};
-		rsnd_port1: port@1 {
-			rsnd_ep1: endpoint {
-				remote-endpoint = <&codec_1>;
-				...
-				playback = <&ssiu31 &ssi3>;
-			};
-		};
-		rsnd_port2: port@2 {
-			rsnd_ep2: endpoint {
-				remote-endpoint = <&codec_2>;
-				...
-				playback = <&ssiu32 &ssi3>;
-			};
-		};
-		rsnd_port3: port@3 {
-			rsnd_ep3: endpoint {
-				remote-endpoint = <&codec_3>;
-				...
-				playback = <&ssiu33 &ssi3>;
-			};
-		};
-	};
-};
-
-=============================================
-Example: simple sound card for Multi channel
-=============================================
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins &sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
new file mode 100644
index 000000000000..9be88c2e4f16
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -0,0 +1,456 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Sound Driver Device Tree Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+
+  compatible:
+    oneOf:
+      # for Gen1 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a7778   # R-Car M1A
+              - renesas,rcar_sound-r8a7779   # R-Car H1
+          - enum:
+              - renesas,rcar_sound-gen1
+      # for Gen2 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a7742   # RZ/G1H
+              - renesas,rcar_sound-r8a7743   # RZ/G1M
+              - renesas,rcar_sound-r8a7744   # RZ/G1N
+              - renesas,rcar_sound-r8a7745   # RZ/G1E
+              - renesas,rcar_sound-r8a77470  # RZ/G1C
+              - renesas,rcar_sound-r8a7790   # R-Car H2
+              - renesas,rcar_sound-r8a7791   # R-Car M2-W
+              - renesas,rcar_sound-r8a7793   # R-Car M2-N
+              - renesas,rcar_sound-r8a7794   # R-Car E2
+          - enum:
+              - renesas,rcar_sound-gen2
+      # for Gen3 SoC
+      - items:
+          - enum:
+              - renesas,rcar_sound-r8a774a1  # RZ/G2M
+              - renesas,rcar_sound-r8a774b1  # RZ/G2N
+              - renesas,rcar_sound-r8a774c0  # RZ/G2E
+              - renesas,rcar_sound-r8a774e1  # RZ/G2H
+              - renesas,rcar_sound-r8a7795   # R-Car H3
+              - renesas,rcar_sound-r8a7796   # R-Car M3-W
+              - renesas,rcar_sound-r8a77965  # R-Car M3-N
+              - renesas,rcar_sound-r8a77990  # R-Car E3
+              - renesas,rcar_sound-r8a77995  # R-Car D3
+          - enum:
+              - renesas,rcar_sound-gen3
+      # for Generic
+      - items:
+          - enum:
+              - renesas,rcar_sound-gen1
+              - renesas,rcar_sound-gen2
+              - renesas,rcar_sound-gen3
+
+  reg:
+    minItems: 1
+    maxItems: 5
+
+  reg-names:
+    minItems: 1
+    maxItems: 5
+
+  "#sound-dai-cells":
+    description: |
+      it must be 0 if your system is using single DAI
+      it must be 1 if your system is using multi  DAIs
+    enum: [0, 1]
+
+  "#clock-cells":
+    description: |
+      it must be 0 if your system has audio_clkout
+      it must be 1 if your system has audio_clkout0/1/2/3
+    enum: [0, 1]
+
+  clock-frequency:
+    description: for audio_clkout0/1/2/3
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clkout-lr-asynchronous:
+    description: audio_clkoutn is asynchronizes with lr-clock.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  power-domains: true
+
+  resets:
+    maxItems: 11
+
+  reset-names:
+    maxItems: 11
+
+  clocks:
+    description: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
+    minItems: 1
+    maxItems: 31
+
+  clock-names:
+    description: List of necessary clock names.
+    minItems: 1
+    maxItems: 31
+    items:
+      oneOf:
+        - const: ssi-all
+        - pattern: '^ssi\.[0-9]$'
+        - pattern: '^src\.[0-9]$'
+        - pattern: '^mix\.[0-1]$'
+        - pattern: '^ctu\.[0-1]$'
+        - pattern: '^dvc\.[0-1]$'
+        - pattern: '^clk_(a|b|c|i)$'
+
+  port:
+    description: OF-Graph subnode
+    $ref: "audio-graph-card.yaml#/properties/port"
+
+  ports:
+    description: multi OF-Graph subnode
+    $ref: "audio-graph-card.yaml#/properties/ports"
+
+# use patternProperties to avoid naming "xxx,yyy" issue
+patternProperties:
+  "^rcar_sound,dvc$":
+    description: DVC subnode.
+    type: object
+    patternProperties:
+      "^dvc-[0-1]$":
+        type: object
+        properties:
+          dmas:
+            maxItems: 1
+          dma-names:
+            const: "tx"
+        required:
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  "^rcar_sound,mix$":
+    description: MIX subnode.
+    type: object
+    patternProperties:
+      "^mix-[0-1]$":
+        type: object
+        # no propaties
+    additionalProperties: false
+
+  "^rcar_sound,ctu$":
+    description: CTU subnode.
+    type: object
+    patternProperties:
+      "^ctu-[0-7]$":
+        type: object
+        # no propaties
+    additionalProperties: false
+
+  "^rcar_sound,src$":
+    description: SRC subnode.
+    type: object
+    patternProperties:
+      "^src-[0-9]$":
+        type: object
+        properties:
+          interrupts:
+            maxItems: 1
+          dmas:
+            maxItems: 2
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+        allOf:
+          - if:
+              properties:
+                status:
+                  const: "ok"
+            then:
+              required:
+                - interrupts
+                - dmas
+                - dma-names
+    additionalProperties: false
+
+  "^rcar_sound,ssiu$":
+    description: SSIU subnode.
+    type: object
+    patternProperties:
+      "^ssiu-[0-9]+$":
+        type: object
+        properties:
+          dmas:
+            maxItems: 2
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+        required:
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  "^rcar_sound,ssi$":
+    description: SSI subnode.
+    type: object
+    patternProperties:
+      "^ssi-[0-9]$":
+        type: object
+        properties:
+          interrupts:
+            maxItems: 1
+          dmas:
+            minItems: 2
+            maxItems: 4
+          dma-names:
+            allOf:
+              - items:
+                  enum:
+                    - tx
+                    - rx
+                    - txu # if no ssiu node
+                    - rxu # if no ssiu node
+
+          shared-pin:
+            description: shared clock pin
+            $ref: /schemas/types.yaml#/definitions/flag
+          pio-transfer:
+            description: PIO transfer mode
+            $ref: /schemas/types.yaml#/definitions/flag
+          no-busif:
+            description: BUSIF is not used when [mem -> SSI] via DMA case
+            $ref: /schemas/types.yaml#/definitions/flag
+        required:
+          - interrupts
+          - dmas
+          - dma-names
+    additionalProperties: false
+
+  # For DAI base
+  "^rcar_sound,dai$":
+    description: DAI subnode.
+    type: object
+    patternProperties:
+      "^dai([0-9]+)?$":
+        type: object
+        properties:
+          playback:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+          capture:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+        anyOf:
+          - required:
+              - playback
+          - required:
+              - capture
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - "#sound-dai-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar_sound-gen1
+    then:
+      properties:
+        reg:
+          maxItems: 3
+        reg-names:
+          maxItems: 3
+          items:
+            enum:
+              - scu
+              - ssi
+              - adg
+    else:
+      properties:
+        reg:
+          maxItems: 5
+        reg-names:
+          maxItems: 5
+          items:
+            enum:
+              - scu
+              - adg
+              - ssiu
+              - ssi
+              - audmapp
+
+additionalProperties: false
+
+examples:
+  - |
+    rcar_sound: sound@ec500000 {
+        #sound-dai-cells = <1>;
+        compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2";
+        reg = <0xec500000 0x1000>, /* SCU  */
+              <0xec5a0000 0x100>,  /* ADG  */
+              <0xec540000 0x1000>, /* SSIU */
+              <0xec541000 0x1280>, /* SSI  */
+              <0xec740000 0x200>;  /* Audio DMAC peri peri*/
+        reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+        clocks = <&mstp10_clks 1005>,                      /* SSI-ALL    */
+                 <&mstp10_clks 1006>, <&mstp10_clks 1007>, /* SSI9, SSI8 */
+                 <&mstp10_clks 1008>, <&mstp10_clks 1009>, /* SSI7, SSI6 */
+                 <&mstp10_clks 1010>, <&mstp10_clks 1011>, /* SSI5, SSI4 */
+                 <&mstp10_clks 1012>, <&mstp10_clks 1013>, /* SSI3, SSI2 */
+                 <&mstp10_clks 1014>, <&mstp10_clks 1015>, /* SSI1, SSI0 */
+                 <&mstp10_clks 1022>, <&mstp10_clks 1023>, /* SRC9, SRC8 */
+                 <&mstp10_clks 1024>, <&mstp10_clks 1025>, /* SRC7, SRC6 */
+                 <&mstp10_clks 1026>, <&mstp10_clks 1027>, /* SRC5, SRC4 */
+                 <&mstp10_clks 1028>, <&mstp10_clks 1029>, /* SRC3, SRC2 */
+                 <&mstp10_clks 1030>, <&mstp10_clks 1031>, /* SRC1, SRC0 */
+                 <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* MIX1, MIX0 */
+                 <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* CTU1, CTU0 */
+                 <&mstp10_clks 1019>, <&mstp10_clks 1018>, /* DVC0, DVC1 */
+                 <&audio_clk_a>, <&audio_clk_b>,           /* CLKA, CLKB */
+                 <&audio_clk_c>, <&audio_clk_i>;           /* CLKC, CLKI */
+
+        clock-names = "ssi-all",
+                      "ssi.9", "ssi.8",
+                      "ssi.7", "ssi.6",
+                      "ssi.5", "ssi.4",
+                      "ssi.3", "ssi.2",
+                      "ssi.1", "ssi.0",
+                      "src.9", "src.8",
+                      "src.7", "src.6",
+                      "src.5", "src.4",
+                      "src.3", "src.2",
+                      "src.1", "src.0",
+                      "mix.1", "mix.0",
+                      "ctu.1", "ctu.0",
+                      "dvc.0", "dvc.1",
+                      "clk_a", "clk_b",
+                      "clk_c", "clk_i";
+
+        rcar_sound,dvc {
+               dvc0: dvc-0 {
+                    dmas = <&audma0 0xbc>;
+                    dma-names = "tx";
+               };
+               dvc1: dvc-1 {
+                    dmas = <&audma0 0xbe>;
+                    dma-names = "tx";
+               };
+        };
+
+        rcar_sound,mix {
+            mix0: mix-0 { };
+            mix1: mix-1 { };
+        };
+
+        rcar_sound,ctu {
+            ctu00: ctu-0 { };
+            ctu01: ctu-1 { };
+            ctu02: ctu-2 { };
+            ctu03: ctu-3 { };
+            ctu10: ctu-4 { };
+            ctu11: ctu-5 { };
+            ctu12: ctu-6 { };
+            ctu13: ctu-7 { };
+        };
+
+        rcar_sound,src {
+            src0: src-0 {
+                status = "disabled";
+            };
+            src1: src-1 {
+                interrupts = <0 353 0>;
+                dmas = <&audma0 0x87>, <&audma1 0x9c>;
+                dma-names = "rx", "tx";
+            };
+            /* skip after src-2 */
+        };
+
+        rcar_sound,ssiu {
+            ssiu00: ssiu-0 {
+                dmas = <&audma0 0x15>, <&audma1 0x16>;
+                dma-names = "rx", "tx";
+            };
+            ssiu01: ssiu-1 {
+                dmas = <&audma0 0x35>, <&audma1 0x36>;
+                dma-names = "rx", "tx";
+            };
+            /* skip after ssiu-2 */
+        };
+
+        rcar_sound,ssi {
+            ssi0: ssi-0 {
+                interrupts = <0 370 1>;
+                dmas = <&audma0 0x01>, <&audma1 0x02>;
+                dma-names = "rx", "tx";
+            };
+            ssi1: ssi-1 {
+                interrupts = <0 371 1>;
+                dmas = <&audma0 0x03>, <&audma1 0x04>;
+                dma-names = "rx", "tx";
+            };
+            /* skip other ssi-2 */
+        };
+
+        /* DAI base */
+        rcar_sound,dai {
+            dai0 {
+                playback = <&ssi5 &src5>;
+                capture  = <&ssi6>;
+            };
+            dai1 {
+                playback = <&ssi3>;
+            };
+            dai2 {
+                capture  = <&ssi4>;
+            };
+            dai3 {
+                playback = <&ssi7>;
+            };
+            dai4 {
+                capture  = <&ssi8>;
+            };
+        };
+
+        /* assume audio-graph */
+        port {
+            rsnd_endpoint: endpoint {
+                remote-endpoint = <&codec_endpoint>;
+
+                dai-format = "left_j";
+                bitclock-master = <&rsnd_endpoint0>;
+                frame-master = <&rsnd_endpoint0>;
+
+                playback = <&ssi0 &src0 &dvc0>;
+                capture  = <&ssi1 &src1 &dvc1>;
+            };
+        };
+    };
+
+
+    /* assume audio-graph */
+    codec {
+        port {
+            codec_endpoint: endpoint {
+                remote-endpoint = <&rsnd_endpoint>;
+            };
+        };
+    };
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support
  2020-10-29  0:04 ` Kuninori Morimoto
@ 2020-10-29  0:05   ` Kuninori Morimoto
  -1 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-10-29  0:05 UTC (permalink / raw)
  To: Rob Herring, Mark Brown; +Cc: alsa-devel, devicetree, Sameer Pujar


From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Document R-Car M3-W+ (R8A77961) SoC bindings.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index 9be88c2e4f16..dd0247802e65 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -43,6 +43,7 @@ properties:
               - renesas,rcar_sound-r8a774e1  # RZ/G2H
               - renesas,rcar_sound-r8a7795   # R-Car H3
               - renesas,rcar_sound-r8a7796   # R-Car M3-W
+              - renesas,rcar_sound-r8a77961  # R-Car M3-W+
               - renesas,rcar_sound-r8a77965  # R-Car M3-N
               - renesas,rcar_sound-r8a77990  # R-Car E3
               - renesas,rcar_sound-r8a77995  # R-Car D3
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v4 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support
@ 2020-10-29  0:05   ` Kuninori Morimoto
  0 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-10-29  0:05 UTC (permalink / raw)
  To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar


From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Document R-Car M3-W+ (R8A77961) SoC bindings.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index 9be88c2e4f16..dd0247802e65 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -43,6 +43,7 @@ properties:
               - renesas,rcar_sound-r8a774e1  # RZ/G2H
               - renesas,rcar_sound-r8a7795   # R-Car H3
               - renesas,rcar_sound-r8a7796   # R-Car M3-W
+              - renesas,rcar_sound-r8a77961  # R-Car M3-W+
               - renesas,rcar_sound-r8a77965  # R-Car M3-N
               - renesas,rcar_sound-r8a77990  # R-Car E3
               - renesas,rcar_sound-r8a77995  # R-Car D3
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCH v4 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
  2020-10-29  0:05   ` Kuninori Morimoto
@ 2020-10-29  4:36     ` Sameer Pujar
  -1 siblings, 0 replies; 12+ messages in thread
From: Sameer Pujar @ 2020-10-29  4:36 UTC (permalink / raw)
  To: Kuninori Morimoto, Rob Herring, Mark Brown; +Cc: alsa-devel, devicetree

Hi Morimoto-san,

> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> This patch switches from .txt base to .yaml base Document.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
>   .../bindings/sound/audio-graph-card.txt       | 337 ------------------
>   .../bindings/sound/audio-graph-card.yaml      | 165 +++++++++
>   .../devicetree/bindings/vendor-prefixes.yaml  |   2 +-
>   3 files changed, 166 insertions(+), 338 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
>   create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
>

...

> diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
> new file mode 100644
> index 000000000000..9ccffbda86a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
> @@ -0,0 +1,165 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Audio Graph Card Driver Device Tree Bindings
> +
> +maintainers:
> +  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - audio-graph-card
> +      - audio-graph-scu-card
> +
> +  dais:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +  label:
> +    maxItems: 1
> +  prefix:
> +    description: "device name prefix"
> +    $ref: /schemas/types.yaml#/definitions/string
> +  "audio-graph-card,prefix":
> +    description: "device name prefix"
> +    $ref: /schemas/types.yaml#/definitions/string
> +  routing:
> +    description: |
> +      A list of the connections between audio components.
> +      Each entry is a pair of strings, the first being the
> +      connection's sink, the second being the connection's source.
> +    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> +  widgets:
> +    description: User specified audio sound widgets.
> +    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> +  convert-rate:
> +    description: CPU to Codec rate convert.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +  "audio-graph-card,convert-rate":
> +    description: CPU to Codec rate convert.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +  convert-channels:
> +    description: CPU to Codec rate channels.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +  "audio-graph-card,convert-channels":
> +    description: CPU to Codec rate channels.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +  pa-gpios:
> +    maxItems: 1
> +  hp-det-gpio:
> +    maxItems: 1
> +  mic-det-gpio:
> +    maxItems: 1
> +

> +  endpoint:
> +    type: object
> +    properties:
> +      remote-endpoint:
> +        maxItems: 1
> +      mclk-fs:
> +        description: |
> +          Multiplication factor between stream rate and codec mclk.
> +          When defined, mclk-fs property defined in dai-link sub nodes are ignored.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +      frame-inversion:
> +        description: dai-link uses frame clock inversion
> +        $ref: /schemas/types.yaml#/definitions/flag
> +      bitclock-inversion:
> +        description: dai-link uses bit clock inversion
> +        $ref: /schemas/types.yaml#/definitions/flag
> +      frame-master:
> +        description: Indicates dai-link frame master.
> +        $ref: /schemas/types.yaml#/definitions/phandle-array
> +        maxItems: 1
> +      bitclock-master:
> +        description: Indicates dai-link bit clock master
> +        $ref: /schemas/types.yaml#/definitions/phandle-array
> +        maxItems: 1
> +      dai-format:
> +        description: audio format.
> +        items:
> +          enum:
> +            - i2s
> +            - right_j
> +            - left_j
> +            - dsp_a
> +            - dsp_b
> +            - ac97
> +            - pdm
> +            - msb
> +            - lsb
> +      convert-rate:
> +        description: CPU to Codec rate convert.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +      convert-channels:
> +        description: CPU to Codec rate channels.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +    required:
> +      - remote-endpoint
> +

Sorry this point was not clear to me. Can 'endpoint' exist without 
port/ports? Should this rather be moved inside of port?

> +  port:
> +    description: single OF-Graph subnode
> +    type: object
> +    properties:
> +      reg:
> +        maxItems: 1
> +      prefix:
> +        description: "device name prefix"
> +        $ref: /schemas/types.yaml#/definitions/string
> +      convert-rate:
> +        description: CPU to Codec rate convert.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +      convert-channels:
> +        description: CPU to Codec rate channels.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +    patternProperties:
> +      "^endpoint(@[0-9a-f]+)?":
> +        $ref: "#/properties/endpoint"
> +
> +  ports:
> +    description: multi OF-Graph subnode
> +    type: object
> +    patternProperties:
> +      "^port(@[0-9a-f]+)?":
> +        $ref: "#/properties/port"

...


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v4 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
@ 2020-10-29  4:36     ` Sameer Pujar
  0 siblings, 0 replies; 12+ messages in thread
From: Sameer Pujar @ 2020-10-29  4:36 UTC (permalink / raw)
  To: Kuninori Morimoto, Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel

Hi Morimoto-san,

> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> This patch switches from .txt base to .yaml base Document.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
>   .../bindings/sound/audio-graph-card.txt       | 337 ------------------
>   .../bindings/sound/audio-graph-card.yaml      | 165 +++++++++
>   .../devicetree/bindings/vendor-prefixes.yaml  |   2 +-
>   3 files changed, 166 insertions(+), 338 deletions(-)
>   delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
>   create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
>

...

> diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
> new file mode 100644
> index 000000000000..9ccffbda86a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
> @@ -0,0 +1,165 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Audio Graph Card Driver Device Tree Bindings
> +
> +maintainers:
> +  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - audio-graph-card
> +      - audio-graph-scu-card
> +
> +  dais:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +  label:
> +    maxItems: 1
> +  prefix:
> +    description: "device name prefix"
> +    $ref: /schemas/types.yaml#/definitions/string
> +  "audio-graph-card,prefix":
> +    description: "device name prefix"
> +    $ref: /schemas/types.yaml#/definitions/string
> +  routing:
> +    description: |
> +      A list of the connections between audio components.
> +      Each entry is a pair of strings, the first being the
> +      connection's sink, the second being the connection's source.
> +    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> +  widgets:
> +    description: User specified audio sound widgets.
> +    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> +  convert-rate:
> +    description: CPU to Codec rate convert.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +  "audio-graph-card,convert-rate":
> +    description: CPU to Codec rate convert.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +  convert-channels:
> +    description: CPU to Codec rate channels.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +  "audio-graph-card,convert-channels":
> +    description: CPU to Codec rate channels.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +  pa-gpios:
> +    maxItems: 1
> +  hp-det-gpio:
> +    maxItems: 1
> +  mic-det-gpio:
> +    maxItems: 1
> +

> +  endpoint:
> +    type: object
> +    properties:
> +      remote-endpoint:
> +        maxItems: 1
> +      mclk-fs:
> +        description: |
> +          Multiplication factor between stream rate and codec mclk.
> +          When defined, mclk-fs property defined in dai-link sub nodes are ignored.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +      frame-inversion:
> +        description: dai-link uses frame clock inversion
> +        $ref: /schemas/types.yaml#/definitions/flag
> +      bitclock-inversion:
> +        description: dai-link uses bit clock inversion
> +        $ref: /schemas/types.yaml#/definitions/flag
> +      frame-master:
> +        description: Indicates dai-link frame master.
> +        $ref: /schemas/types.yaml#/definitions/phandle-array
> +        maxItems: 1
> +      bitclock-master:
> +        description: Indicates dai-link bit clock master
> +        $ref: /schemas/types.yaml#/definitions/phandle-array
> +        maxItems: 1
> +      dai-format:
> +        description: audio format.
> +        items:
> +          enum:
> +            - i2s
> +            - right_j
> +            - left_j
> +            - dsp_a
> +            - dsp_b
> +            - ac97
> +            - pdm
> +            - msb
> +            - lsb
> +      convert-rate:
> +        description: CPU to Codec rate convert.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +      convert-channels:
> +        description: CPU to Codec rate channels.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +    required:
> +      - remote-endpoint
> +

Sorry this point was not clear to me. Can 'endpoint' exist without 
port/ports? Should this rather be moved inside of port?

> +  port:
> +    description: single OF-Graph subnode
> +    type: object
> +    properties:
> +      reg:
> +        maxItems: 1
> +      prefix:
> +        description: "device name prefix"
> +        $ref: /schemas/types.yaml#/definitions/string
> +      convert-rate:
> +        description: CPU to Codec rate convert.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +      convert-channels:
> +        description: CPU to Codec rate channels.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +    patternProperties:
> +      "^endpoint(@[0-9a-f]+)?":
> +        $ref: "#/properties/endpoint"
> +
> +  ports:
> +    description: multi OF-Graph subnode
> +    type: object
> +    patternProperties:
> +      "^port(@[0-9a-f]+)?":
> +        $ref: "#/properties/port"

...


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v4 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
  2020-10-29  4:36     ` Sameer Pujar
@ 2020-10-29  4:48       ` Kuninori Morimoto
  -1 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-10-29  4:48 UTC (permalink / raw)
  To: Sameer Pujar; +Cc: Rob Herring, Mark Brown, alsa-devel, devicetree


Hi Sameer

Thank you for your feedback

> > +  endpoint:
> > +    type: object
> > +    properties:
> > +      remote-endpoint:
> > +        maxItems: 1
> > +      mclk-fs:
> > +        description: |
> > +          Multiplication factor between stream rate and codec mclk.
> > +          When defined, mclk-fs property defined in dai-link sub nodes are ignored.
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +      frame-inversion:
> > +        description: dai-link uses frame clock inversion
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +      bitclock-inversion:
> > +        description: dai-link uses bit clock inversion
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +      frame-master:
> > +        description: Indicates dai-link frame master.
> > +        $ref: /schemas/types.yaml#/definitions/phandle-array
> > +        maxItems: 1
> > +      bitclock-master:
> > +        description: Indicates dai-link bit clock master
> > +        $ref: /schemas/types.yaml#/definitions/phandle-array
> > +        maxItems: 1
> > +      dai-format:
> > +        description: audio format.
> > +        items:
> > +          enum:
> > +            - i2s
> > +            - right_j
> > +            - left_j
> > +            - dsp_a
> > +            - dsp_b
> > +            - ac97
> > +            - pdm
> > +            - msb
> > +            - lsb
> > +      convert-rate:
> > +        description: CPU to Codec rate convert.
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +      convert-channels:
> > +        description: CPU to Codec rate channels.
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +    required:
> > +      - remote-endpoint
> > +
> 
> Sorry this point was not clear to me. Can 'endpoint' exist without
> port/ports? Should this rather be moved inside of port?

Ahh, yes.
You had been indicated it in previous mail.
I will try to move under port in v5

Thank you for your help !!

Best regards
---
Kuninori Morimoto

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v4 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
@ 2020-10-29  4:48       ` Kuninori Morimoto
  0 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-10-29  4:48 UTC (permalink / raw)
  To: Sameer Pujar; +Cc: devicetree, Mark Brown, Rob Herring, alsa-devel


Hi Sameer

Thank you for your feedback

> > +  endpoint:
> > +    type: object
> > +    properties:
> > +      remote-endpoint:
> > +        maxItems: 1
> > +      mclk-fs:
> > +        description: |
> > +          Multiplication factor between stream rate and codec mclk.
> > +          When defined, mclk-fs property defined in dai-link sub nodes are ignored.
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +      frame-inversion:
> > +        description: dai-link uses frame clock inversion
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +      bitclock-inversion:
> > +        description: dai-link uses bit clock inversion
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +      frame-master:
> > +        description: Indicates dai-link frame master.
> > +        $ref: /schemas/types.yaml#/definitions/phandle-array
> > +        maxItems: 1
> > +      bitclock-master:
> > +        description: Indicates dai-link bit clock master
> > +        $ref: /schemas/types.yaml#/definitions/phandle-array
> > +        maxItems: 1
> > +      dai-format:
> > +        description: audio format.
> > +        items:
> > +          enum:
> > +            - i2s
> > +            - right_j
> > +            - left_j
> > +            - dsp_a
> > +            - dsp_b
> > +            - ac97
> > +            - pdm
> > +            - msb
> > +            - lsb
> > +      convert-rate:
> > +        description: CPU to Codec rate convert.
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +      convert-channels:
> > +        description: CPU to Codec rate channels.
> > +        $ref: /schemas/types.yaml#/definitions/uint32
> > +    required:
> > +      - remote-endpoint
> > +
> 
> Sorry this point was not clear to me. Can 'endpoint' exist without
> port/ports? Should this rather be moved inside of port?

Ahh, yes.
You had been indicated it in previous mail.
I will try to move under port in v5

Thank you for your help !!

Best regards
---
Kuninori Morimoto

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2020-10-29  7:56 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-29  0:04 [PATCH v4 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation Kuninori Morimoto
2020-10-29  0:04 ` Kuninori Morimoto
2020-10-29  0:05 ` [PATCH v4 1/3] dt-bindings: ASoC: " Kuninori Morimoto
2020-10-29  0:05   ` Kuninori Morimoto
2020-10-29  4:36   ` Sameer Pujar
2020-10-29  4:36     ` Sameer Pujar
2020-10-29  4:48     ` Kuninori Morimoto
2020-10-29  4:48       ` Kuninori Morimoto
2020-10-29  0:05 ` [PATCH v4 2/3] dt-bindings: ASoC: renesas,rsnd: " Kuninori Morimoto
2020-10-29  0:05   ` [PATCH v4 2/3] dt-bindings: ASoC: renesas, rsnd: " Kuninori Morimoto
2020-10-29  0:05 ` [PATCH v4 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support Kuninori Morimoto
2020-10-29  0:05   ` Kuninori Morimoto

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.