* ath11k: QCA6390 support on Linux @ 2020-09-14 17:20 ` Kalle Valo 0 siblings, 0 replies; 9+ messages in thread From: Kalle Valo @ 2020-09-14 17:20 UTC (permalink / raw) To: ath11k; +Cc: linux-wireless, linux-kernel Hi, some of the Dell XPS 15 9500 models have QCA6390 Wi-Fi 6 device. ath11k will be the driver to support QCA6390 and the plan is that Linux v5.10 (most likely released end of December) will be the first release to support it. But as everything is not ready yet I recommend people to test ath11k-qca6390-bringup branch, and specifically tag ath11k-qca6390-bringup-202008181507. Below are instructions how to install kernel and firmware. Do note that this is still experimental, there will be bugs but at least it should be possible to connect to an AP and have connectivity. Please send all questions, comments and bug reports to ath11k@lists.infradead.org list. I do not have time to reply to private email. I have Bcced people who have contacted me privately. Kalle # clone kernel git clone -b ath11k-qca6390-bringup-202008181507 https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git # Tag ath11k-qca6390-bringup-202008181507 uses v5.9-rc1 as the baseline # which has a regression in nvme subsystem, so this nvme patch might be # needed as well: # http://git.infradead.org/nvme.git/commitdiff/286155561ecd13b6c85a78eaf2880d3baea03b9e # clone firmware git clone https://github.com/kvalo/ath11k-firmware.git # Ensure below options are selected in the kernel cd ath make menuconfig --> Select Device drivers --> Network device support --> Wireless LAN --> Enable as below <M> Qualcomm Technologies 11ax chipset support <M> Atheros ath11k PCI support [*] QCA ath11k debugging [*] QCA ath11k debugfs support [*] ath11k tracing support [*] QCA ath11k spectral scan support # Build and install the kernel and kernel modules # Install firmware cd ../ath11k-firmware sudo mkdir -p /lib/firmware/ath11k/QCA6390/hw2.0/ sudo cp QCA6390/hw2.0/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/*.bin /lib/firmware/ath11k/QCA6390/hw2.0/ sudo cp QCA6390/hw2.0/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/bdwlan.e04 /lib/firmware/ath11k/QCA6390/hw2.0/board.bin -- https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches ^ permalink raw reply [flat|nested] 9+ messages in thread
* ath11k: QCA6390 support on Linux @ 2020-09-14 17:20 ` Kalle Valo 0 siblings, 0 replies; 9+ messages in thread From: Kalle Valo @ 2020-09-14 17:20 UTC (permalink / raw) To: ath11k; +Cc: linux-wireless, linux-kernel Hi, some of the Dell XPS 15 9500 models have QCA6390 Wi-Fi 6 device. ath11k will be the driver to support QCA6390 and the plan is that Linux v5.10 (most likely released end of December) will be the first release to support it. But as everything is not ready yet I recommend people to test ath11k-qca6390-bringup branch, and specifically tag ath11k-qca6390-bringup-202008181507. Below are instructions how to install kernel and firmware. Do note that this is still experimental, there will be bugs but at least it should be possible to connect to an AP and have connectivity. Please send all questions, comments and bug reports to ath11k@lists.infradead.org list. I do not have time to reply to private email. I have Bcced people who have contacted me privately. Kalle # clone kernel git clone -b ath11k-qca6390-bringup-202008181507 https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git # Tag ath11k-qca6390-bringup-202008181507 uses v5.9-rc1 as the baseline # which has a regression in nvme subsystem, so this nvme patch might be # needed as well: # http://git.infradead.org/nvme.git/commitdiff/286155561ecd13b6c85a78eaf2880d3baea03b9e # clone firmware git clone https://github.com/kvalo/ath11k-firmware.git # Ensure below options are selected in the kernel cd ath make menuconfig --> Select Device drivers --> Network device support --> Wireless LAN --> Enable as below <M> Qualcomm Technologies 11ax chipset support <M> Atheros ath11k PCI support [*] QCA ath11k debugging [*] QCA ath11k debugfs support [*] ath11k tracing support [*] QCA ath11k spectral scan support # Build and install the kernel and kernel modules # Install firmware cd ../ath11k-firmware sudo mkdir -p /lib/firmware/ath11k/QCA6390/hw2.0/ sudo cp QCA6390/hw2.0/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/*.bin /lib/firmware/ath11k/QCA6390/hw2.0/ sudo cp QCA6390/hw2.0/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/bdwlan.e04 /lib/firmware/ath11k/QCA6390/hw2.0/board.bin -- https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath11k: QCA6390 support on Linux 2020-09-14 17:20 ` Kalle Valo @ 2020-11-04 16:33 ` Kalle Valo -1 siblings, 0 replies; 9+ messages in thread From: Kalle Valo @ 2020-11-04 16:33 UTC (permalink / raw) To: ath11k; +Cc: linux-wireless, linux-kernel Kalle Valo <kvalo@codeaurora.org> writes: > some of the Dell XPS 15 9500 models have QCA6390 Wi-Fi 6 device. ath11k > will be the driver to support QCA6390 and the plan is that Linux v5.10 > (most likely released end of December) will be the first release to > support it. > > But as everything is not ready yet I recommend people to test > ath11k-qca6390-bringup branch, and specifically tag > ath11k-qca6390-bringup-202008181507. Below are instructions how to > install kernel and firmware. > > Do note that this is still experimental, there will be bugs but at least > it should be possible to connect to an AP and have connectivity. > > Please send all questions, comments and bug reports to > ath11k@lists.infradead.org list. I do not have time to reply to private > email. I have Bcced people who have contacted me privately. Some updates: * QCA6390 support is now in v5.10-rc2 * pull request to linux-firmware sent, not yet pulled * board-2.bin should be now used instead of board.bin * there was some reorganisation in ath11k-firmware Here are updated instructions on how to test ath11k: # clone kernel git clone -b v5.10-rc2 git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git # clone firmware git clone https://github.com/kvalo/ath11k-firmware.git # Ensure below options are selected in the kernel cd linux make menuconfig --> Select Device drivers --> Network device support --> Wireless LAN --> Enable as below <M> Qualcomm Technologies 11ax chipset support <M> Atheros ath11k PCI support [*] QCA ath11k debugging [*] QCA ath11k debugfs support [*] ath11k tracing support [*] QCA ath11k spectral scan support # Build and install the kernel and kernel modules # Install firmware cd ../ath11k-firmware sudo mkdir -p /lib/firmware/ath11k/QCA6390/hw2.0/ sudo cp QCA6390/hw2.0/1.0.1/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/*.bin /lib/firmware/ath11k/QCA6390/hw2.0/ sudo cp QCA6390/hw2.0/board-2.bin /lib/firmware/ath11k/QCA6390/hw2.0/ -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath11k: QCA6390 support on Linux @ 2020-11-04 16:33 ` Kalle Valo 0 siblings, 0 replies; 9+ messages in thread From: Kalle Valo @ 2020-11-04 16:33 UTC (permalink / raw) To: ath11k; +Cc: linux-wireless, linux-kernel Kalle Valo <kvalo@codeaurora.org> writes: > some of the Dell XPS 15 9500 models have QCA6390 Wi-Fi 6 device. ath11k > will be the driver to support QCA6390 and the plan is that Linux v5.10 > (most likely released end of December) will be the first release to > support it. > > But as everything is not ready yet I recommend people to test > ath11k-qca6390-bringup branch, and specifically tag > ath11k-qca6390-bringup-202008181507. Below are instructions how to > install kernel and firmware. > > Do note that this is still experimental, there will be bugs but at least > it should be possible to connect to an AP and have connectivity. > > Please send all questions, comments and bug reports to > ath11k@lists.infradead.org list. I do not have time to reply to private > email. I have Bcced people who have contacted me privately. Some updates: * QCA6390 support is now in v5.10-rc2 * pull request to linux-firmware sent, not yet pulled * board-2.bin should be now used instead of board.bin * there was some reorganisation in ath11k-firmware Here are updated instructions on how to test ath11k: # clone kernel git clone -b v5.10-rc2 git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git # clone firmware git clone https://github.com/kvalo/ath11k-firmware.git # Ensure below options are selected in the kernel cd linux make menuconfig --> Select Device drivers --> Network device support --> Wireless LAN --> Enable as below <M> Qualcomm Technologies 11ax chipset support <M> Atheros ath11k PCI support [*] QCA ath11k debugging [*] QCA ath11k debugfs support [*] ath11k tracing support [*] QCA ath11k spectral scan support # Build and install the kernel and kernel modules # Install firmware cd ../ath11k-firmware sudo mkdir -p /lib/firmware/ath11k/QCA6390/hw2.0/ sudo cp QCA6390/hw2.0/1.0.1/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/*.bin /lib/firmware/ath11k/QCA6390/hw2.0/ sudo cp QCA6390/hw2.0/board-2.bin /lib/firmware/ath11k/QCA6390/hw2.0/ -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath11k: QCA6390 support on Linux 2020-11-04 16:33 ` Kalle Valo (?) @ 2020-11-04 21:50 ` Kenny Johansson 2020-11-05 10:34 ` Kalle Valo -1 siblings, 1 reply; 9+ messages in thread From: Kenny Johansson @ 2020-11-04 21:50 UTC (permalink / raw) To: Kalle Valo; +Cc: ath11k Hi I've tried it out and this time it did not work for me. (Previous instructions with ath11k-qca6390-bringup-202008181507 did bring it up.) My laptop is a Dell XPS 15" with Killer Wi-fi 6 AX500-DBS (2x2) (QCA6390) Output from dmesg: sudo dmesg | grep ath11k [ 7.450993] ath11k_pci 0000:6c:00.0: WARNING: ath11k PCI support is experimental! [ 7.451067] ath11k_pci 0000:6c:00.0: BAR 0: assigned [mem 0xb4200000-0xb42fffff 64bit] [ 7.451082] ath11k_pci 0000:6c:00.0: enabling device (0000 -> 0002) [ 7.955819] ath11k_pci 0000:6c:00.0: Respond mem req failed, result: 1, err: 0 [ 7.955821] ath11k_pci 0000:6c:00.0: qmi failed to respond fw mem req:-22 [ 8.004127] ath11k_pci 0000:6c:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff [ 8.004128] ath11k_pci 0000:6c:00.0: fw_version 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id [ 10.081910] ath11k_pci 0000:6c:00.0 wlp108s0: renamed from wlan0 [ 13.346532] ath11k_pci 0000:6c:00.0: wmi command 20488 timeout [ 13.346533] ath11k_pci 0000:6c:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID [ 13.346534] ath11k_pci 0000:6c:00.0: failed to set vdev 0 tx encap mode: -11 [ 16.418519] ath11k_pci 0000:6c:00.0: wmi command 20488 timeout [ 16.418520] ath11k_pci 0000:6c:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID [ 16.418521] ath11k_pci 0000:6c:00.0: failed to set vdev 0 chainmask 0x3, nss 2 :-11 [ 19.490526] ath11k_pci 0000:6c:00.0: wmi command 20482 timeout [ 19.490527] ath11k_pci 0000:6c:00.0: failed to submit WMI_VDEV_DELETE_CMDID [ 22.818765] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout [ 22.818767] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd [ 22.818769] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 [ 25.890491] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout [ 25.890493] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd [ 25.890494] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 [ 38.178527] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout [ 38.178529] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd [ 38.178531] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 [ 41.250526] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout Please let me know if I can provide anything more. On Wed, Nov 4, 2020 at 5:33 PM Kalle Valo <kvalo@codeaurora.org> wrote: > > Kalle Valo <kvalo@codeaurora.org> writes: > > > some of the Dell XPS 15 9500 models have QCA6390 Wi-Fi 6 device. ath11k > > will be the driver to support QCA6390 and the plan is that Linux v5.10 > > (most likely released end of December) will be the first release to > > support it. > > > > But as everything is not ready yet I recommend people to test > > ath11k-qca6390-bringup branch, and specifically tag > > ath11k-qca6390-bringup-202008181507. Below are instructions how to > > install kernel and firmware. > > > > Do note that this is still experimental, there will be bugs but at least > > it should be possible to connect to an AP and have connectivity. > > > > Please send all questions, comments and bug reports to > > ath11k@lists.infradead.org list. I do not have time to reply to private > > email. I have Bcced people who have contacted me privately. > > Some updates: > > * QCA6390 support is now in v5.10-rc2 > > * pull request to linux-firmware sent, not yet pulled > > * board-2.bin should be now used instead of board.bin > > * there was some reorganisation in ath11k-firmware > > Here are updated instructions on how to test ath11k: > > # clone kernel > git clone -b v5.10-rc2 git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git > > # clone firmware > git clone https://github.com/kvalo/ath11k-firmware.git > > # Ensure below options are selected in the kernel > cd linux > make menuconfig > --> Select Device drivers > --> Network device support > --> Wireless LAN > --> Enable as below > <M> Qualcomm Technologies 11ax chipset support > <M> Atheros ath11k PCI support > [*] QCA ath11k debugging > [*] QCA ath11k debugfs support > [*] ath11k tracing support > [*] QCA ath11k spectral scan support > > # Build and install the kernel and kernel modules > > # Install firmware > cd ../ath11k-firmware > sudo mkdir -p /lib/firmware/ath11k/QCA6390/hw2.0/ > sudo cp QCA6390/hw2.0/1.0.1/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/*.bin /lib/firmware/ath11k/QCA6390/hw2.0/ > sudo cp QCA6390/hw2.0/board-2.bin /lib/firmware/ath11k/QCA6390/hw2.0/ > > -- > https://patchwork.kernel.org/project/linux-wireless/list/ > > https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches > > -- > ath11k mailing list > ath11k@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/ath11k -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath11k: QCA6390 support on Linux 2020-11-04 21:50 ` Kenny Johansson @ 2020-11-05 10:34 ` Kalle Valo 2020-11-05 21:47 ` Kenny Johansson 0 siblings, 1 reply; 9+ messages in thread From: Kalle Valo @ 2020-11-05 10:34 UTC (permalink / raw) To: Kenny Johansson; +Cc: ath11k Kenny Johansson <wirehell@gmail.com> writes: > I've tried it out and this time it did not work for me. (Previous > instructions with ath11k-qca6390-bringup-202008181507 did bring it > up.) > > My laptop is a Dell XPS 15" with Killer Wi-fi 6 AX500-DBS (2x2) (QCA6390) > > Output from dmesg: > > sudo dmesg | grep ath11k > [ 7.450993] ath11k_pci 0000:6c:00.0: WARNING: ath11k PCI support is > experimental! > [ 7.451067] ath11k_pci 0000:6c:00.0: BAR 0: assigned [mem > 0xb4200000-0xb42fffff 64bit] > [ 7.451082] ath11k_pci 0000:6c:00.0: enabling device (0000 -> 0002) > [ 7.955819] ath11k_pci 0000:6c:00.0: Respond mem req failed, > result: 1, err: 0 > [ 7.955821] ath11k_pci 0000:6c:00.0: qmi failed to respond fw mem req:-22 > [ 8.004127] ath11k_pci 0000:6c:00.0: chip_id 0x0 chip_family 0xb > board_id 0xff soc_id 0xffffffff > [ 8.004128] ath11k_pci 0000:6c:00.0: fw_version 0x101c06cc > fw_build_timestamp 2020-06-24 19:50 fw_build_id > [ 10.081910] ath11k_pci 0000:6c:00.0 wlp108s0: renamed from wlan0 > [ 13.346532] ath11k_pci 0000:6c:00.0: wmi command 20488 timeout > [ 13.346533] ath11k_pci 0000:6c:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID > [ 13.346534] ath11k_pci 0000:6c:00.0: failed to set vdev 0 tx encap mode: -11 > [ 16.418519] ath11k_pci 0000:6c:00.0: wmi command 20488 timeout > [ 16.418520] ath11k_pci 0000:6c:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID > [ 16.418521] ath11k_pci 0000:6c:00.0: failed to set vdev 0 chainmask > 0x3, nss 2 :-11 > [ 19.490526] ath11k_pci 0000:6c:00.0: wmi command 20482 timeout > [ 19.490527] ath11k_pci 0000:6c:00.0: failed to submit WMI_VDEV_DELETE_CMDID > [ 22.818765] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout > [ 22.818767] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd > [ 22.818769] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 > [ 25.890491] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout > [ 25.890493] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd > [ 25.890494] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 > [ 38.178527] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout > [ 38.178529] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd > [ 38.178531] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 > [ 41.250526] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout > > Please let me know if I can provide anything more. Hmm, this is a new problem, never seen it before. Can you provide output from 'md5sum /lib/firmware/ath11k/QCA6390/hw2.0/*'? I want to check there's no corruption in firmware files. They should be: a101dc90f8e876f39383b60c9da64ec4 /lib/firmware/ath11k/QCA6390/hw2.0/amss.bin 4c0781f659d2b7d6bef10a2e3d457728 /lib/firmware/ath11k/QCA6390/hw2.0/board-2.bin d4c912a3501a3694a3f460d13de06d28 /lib/firmware/ath11k/QCA6390/hw2.0/m3.bin First you could try reverting commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()"), as it helped with Pavel's problem. Though his symptoms were different so I'm not optimistic but it's still a good idea to test it. If that doesn't help, the next best thing would be try to pinpoint where this got broken by testing these three commits: fd5ad4d1e980 wcn36xx: Advertise beacon filtering support in bmps 3650b228f83a Linux 5.10-rc1 3cea11cd5e3b Linux 5.10-rc2 Commit fd5ad4d1e980 is based on v5.9-rc6 so try that first. In these three commits ath11k is practically identical, the only change is a small bugfix in commit 8431350eee2e ("ath11k: Fix memory leak on error path"). For me QCA6390 works on all these commits, I don't know why it's failing for you. -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath11k: QCA6390 support on Linux 2020-11-05 10:34 ` Kalle Valo @ 2020-11-05 21:47 ` Kenny Johansson 2020-11-06 6:24 ` Kalle Valo 0 siblings, 1 reply; 9+ messages in thread From: Kenny Johansson @ 2020-11-05 21:47 UTC (permalink / raw) To: Kalle Valo; +Cc: ath11k Short story: * Firmware matches * Reverting 7fef431be9c9 does not work * fd5ad4d1e980 works * 3650b228f83a does not work Details: Firmware matches: ~/qca$ md5sum /lib/firmware/ath11k/QCA6390/hw2.0/* a101dc90f8e876f39383b60c9da64ec4 /lib/firmware/ath11k/QCA6390/hw2.0/amss.bin 4c0781f659d2b7d6bef10a2e3d457728 /lib/firmware/ath11k/QCA6390/hw2.0/board-2.bin d4c912a3501a3694a3f460d13de06d28 /lib/firmware/ath11k/QCA6390/hw2.0/m3.bin ------ I tried reverting 7fef431be9c9, it did not work, but showed a slightly different error [ 7.618202] ath11k_pci 0000:6c:00.0: WARNING: ath11k PCI support is experimental! [ 7.618411] ath11k_pci 0000:6c:00.0: BAR 0: assigned [mem 0xb4200000-0xb42fffff 64bit] [ 7.618424] ath11k_pci 0000:6c:00.0: enabling device (0000 -> 0002) [ 8.094576] ath11k_pci 0000:6c:00.0: Respond mem req failed, result: 1, err: 0 [ 8.094578] ath11k_pci 0000:6c:00.0: qmi failed to respond fw mem req:-22 [ 8.105426] ath11k_pci 0000:6c:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff [ 8.105428] ath11k_pci 0000:6c:00.0: fw_version 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id [ 13.342271] ath11k_pci 0000:6c:00.0: failed to receive wmi unified ready event: -110 [ 13.343250] ath11k_pci 0000:6c:00.0: qmi failed to send mode request, mode: 4, err = -5 [ 13.343252] ath11k_pci 0000:6c:00.0: qmi failed to send wlan mode off [ 13.343253] ath11k_pci 0000:6c:00.0: failed to start core: -110 ------ The commit 3650b228f83a worked [ 7.452884] ath11k_pci 0000:6c:00.0: WARNING: ath11k PCI support is experimental! [ 7.452926] ath11k_pci 0000:6c:00.0: BAR 0: assigned [mem 0xb4200000-0xb42fffff 64bit] [ 7.452939] ath11k_pci 0000:6c:00.0: enabling device (0000 -> 0002) [ 7.941932] ath11k_pci 0000:6c:00.0: Respond mem req failed, result: 1, err: 0 [ 7.941933] ath11k_pci 0000:6c:00.0: qmi failed to respond fw mem req:-22 [ 7.952897] ath11k_pci 0000:6c:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff [ 7.952897] ath11k_pci 0000:6c:00.0: fw_version 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id [ 8.156172] ath11k_pci 0000:6c:00.0 wlp108s0: renamed from wlan0 ------ The commit 3650b228f83a does not work [ 7.390729] ath11k_pci 0000:6c:00.0: WARNING: ath11k PCI support is experimental! [ 7.390773] ath11k_pci 0000:6c:00.0: BAR 0: assigned [mem 0xb4200000-0xb42fffff 64bit] [ 7.390804] ath11k_pci 0000:6c:00.0: enabling device (0000 -> 0002) [ 7.861912] ath11k_pci 0000:6c:00.0: Respond mem req failed, result: 1, err: 0 [ 7.861914] ath11k_pci 0000:6c:00.0: qmi failed to respond fw mem req:-22 [ 7.872416] ath11k_pci 0000:6c:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff [ 7.872418] ath11k_pci 0000:6c:00.0: fw_version 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id [ 8.072605] ath11k_pci 0000:6c:00.0 wlp108s0: renamed from wlan0 [ 11.298562] ath11k_pci 0000:6c:00.0: wmi command 20488 timeout [ 11.298563] ath11k_pci 0000:6c:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID [ 11.298565] ath11k_pci 0000:6c:00.0: failed to set vdev 0 tx encap mode: -11 [ 14.370799] ath11k_pci 0000:6c:00.0: wmi command 20488 timeout [ 14.370801] ath11k_pci 0000:6c:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID [ 14.370803] ath11k_pci 0000:6c:00.0: failed to set vdev 0 chainmask 0x3, nss 2 :-11 [ 17.442773] ath11k_pci 0000:6c:00.0: wmi command 20482 timeout [ 17.442774] ath11k_pci 0000:6c:00.0: failed to submit WMI_VDEV_DELETE_CMDID [ 20.514613] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout [ 20.514615] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd [ 20.514618] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 [ 23.586522] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout I will try to use fd5ad4d1e980 a bit more to make sure it is not something intermittent, though I suspect not as the bringup-branch seemed to work consistently, while the latest seems consistently broken for me. On Thu, Nov 5, 2020 at 11:34 AM Kalle Valo <kvalo@codeaurora.org> wrote: > > Kenny Johansson <wirehell@gmail.com> writes: > > > I've tried it out and this time it did not work for me. (Previous > > instructions with ath11k-qca6390-bringup-202008181507 did bring it > > up.) > > > > My laptop is a Dell XPS 15" with Killer Wi-fi 6 AX500-DBS (2x2) (QCA6390) > > > > Output from dmesg: > > > > sudo dmesg | grep ath11k > > [ 7.450993] ath11k_pci 0000:6c:00.0: WARNING: ath11k PCI support is > > experimental! > > [ 7.451067] ath11k_pci 0000:6c:00.0: BAR 0: assigned [mem > > 0xb4200000-0xb42fffff 64bit] > > [ 7.451082] ath11k_pci 0000:6c:00.0: enabling device (0000 -> 0002) > > [ 7.955819] ath11k_pci 0000:6c:00.0: Respond mem req failed, > > result: 1, err: 0 > > [ 7.955821] ath11k_pci 0000:6c:00.0: qmi failed to respond fw mem req:-22 > > [ 8.004127] ath11k_pci 0000:6c:00.0: chip_id 0x0 chip_family 0xb > > board_id 0xff soc_id 0xffffffff > > [ 8.004128] ath11k_pci 0000:6c:00.0: fw_version 0x101c06cc > > fw_build_timestamp 2020-06-24 19:50 fw_build_id > > [ 10.081910] ath11k_pci 0000:6c:00.0 wlp108s0: renamed from wlan0 > > [ 13.346532] ath11k_pci 0000:6c:00.0: wmi command 20488 timeout > > [ 13.346533] ath11k_pci 0000:6c:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID > > [ 13.346534] ath11k_pci 0000:6c:00.0: failed to set vdev 0 tx encap mode: -11 > > [ 16.418519] ath11k_pci 0000:6c:00.0: wmi command 20488 timeout > > [ 16.418520] ath11k_pci 0000:6c:00.0: failed to send WMI_VDEV_SET_PARAM_CMDID > > [ 16.418521] ath11k_pci 0000:6c:00.0: failed to set vdev 0 chainmask > > 0x3, nss 2 :-11 > > [ 19.490526] ath11k_pci 0000:6c:00.0: wmi command 20482 timeout > > [ 19.490527] ath11k_pci 0000:6c:00.0: failed to submit WMI_VDEV_DELETE_CMDID > > [ 22.818765] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout > > [ 22.818767] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd > > [ 22.818769] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 > > [ 25.890491] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout > > [ 25.890493] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd > > [ 25.890494] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 > > [ 38.178527] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout > > [ 38.178529] ath11k_pci 0000:6c:00.0: failed to send WMI_PDEV_SET_PARAM cmd > > [ 38.178531] ath11k_pci 0000:6c:00.0: failed to enable PMF QOS: (-11 > > [ 41.250526] ath11k_pci 0000:6c:00.0: wmi command 16387 timeout > > > > Please let me know if I can provide anything more. > > Hmm, this is a new problem, never seen it before. Can you provide output > from 'md5sum /lib/firmware/ath11k/QCA6390/hw2.0/*'? I want to check > there's no corruption in firmware files. They should be: > > a101dc90f8e876f39383b60c9da64ec4 /lib/firmware/ath11k/QCA6390/hw2.0/amss.bin > 4c0781f659d2b7d6bef10a2e3d457728 /lib/firmware/ath11k/QCA6390/hw2.0/board-2.bin > d4c912a3501a3694a3f460d13de06d28 /lib/firmware/ath11k/QCA6390/hw2.0/m3.bin > > First you could try reverting commit 7fef431be9c9 ("mm/page_alloc: place > pages to tail in __free_pages_core()"), as it helped with Pavel's > problem. Though his symptoms were different so I'm not optimistic but > it's still a good idea to test it. > > If that doesn't help, the next best thing would be try to pinpoint where > this got broken by testing these three commits: > > fd5ad4d1e980 wcn36xx: Advertise beacon filtering support in bmps > 3650b228f83a Linux 5.10-rc1 > 3cea11cd5e3b Linux 5.10-rc2 > > Commit fd5ad4d1e980 is based on v5.9-rc6 so try that first. > > In these three commits ath11k is practically identical, the only change > is a small bugfix in commit 8431350eee2e ("ath11k: Fix memory leak on > error path"). For me QCA6390 works on all these commits, I don't know > why it's failing for you. > > -- > https://patchwork.kernel.org/project/linux-wireless/list/ > > https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath11k: QCA6390 support on Linux 2020-11-05 21:47 ` Kenny Johansson @ 2020-11-06 6:24 ` Kalle Valo 2020-11-06 7:26 ` Kenny Johansson 0 siblings, 1 reply; 9+ messages in thread From: Kalle Valo @ 2020-11-06 6:24 UTC (permalink / raw) To: Kenny Johansson; +Cc: ath11k Kenny Johansson <wirehell@gmail.com> writes: > Short story: > * Firmware matches > * Reverting 7fef431be9c9 does not work > * fd5ad4d1e980 works > * 3650b228f83a does not work An excellent summary, makes it a lot easier to understand what's happening :) > Details: > > Firmware matches: > ~/qca$ md5sum /lib/firmware/ath11k/QCA6390/hw2.0/* > a101dc90f8e876f39383b60c9da64ec4 /lib/firmware/ath11k/QCA6390/hw2.0/amss.bin > 4c0781f659d2b7d6bef10a2e3d457728 /lib/firmware/ath11k/QCA6390/hw2.0/board-2.bin > d4c912a3501a3694a3f460d13de06d28 /lib/firmware/ath11k/QCA6390/hw2.0/m3.bin Good, we can rule out firmware corruption then. > The commit 3650b228f83a worked > > [ 7.452884] ath11k_pci 0000:6c:00.0: WARNING: ath11k PCI support is > experimental! > [ 7.452926] ath11k_pci 0000:6c:00.0: BAR 0: assigned [mem > 0xb4200000-0xb42fffff 64bit] > [ 7.452939] ath11k_pci 0000:6c:00.0: enabling device (0000 -> 0002) > [ 7.941932] ath11k_pci 0000:6c:00.0: Respond mem req failed, > result: 1, err: 0 > [ 7.941933] ath11k_pci 0000:6c:00.0: qmi failed to respond fw mem req:-22 > [ 7.952897] ath11k_pci 0000:6c:00.0: chip_id 0x0 chip_family 0xb > board_id 0xff soc_id 0xffffffff > [ 7.952897] ath11k_pci 0000:6c:00.0: fw_version 0x101c06cc > fw_build_timestamp 2020-06-24 19:50 fw_build_id > [ 8.156172] ath11k_pci 0000:6c:00.0 wlp108s0: renamed from wlan0 I think you have a typo here and you mean that commit fd5ad4d1e980 worked, right? The one which is based on v5.9-rc6: fd5ad4d1e980 wcn36xx: Advertise beacon filtering support in bmps > I will try to use fd5ad4d1e980 a bit more to make sure it is not > something intermittent, though I suspect not as the bringup-branch > seemed to work consistently, while the latest seems consistently > broken for me. Yes, it's a good idea to rule out all intermittent issues. This is a weird problem and any randomness might confuse the testing results. Even if your symptoms are different I suspect this is related to Pavel's problem, where the number one suspect is high physical addresses are causing problems: http://lists.infradead.org/pipermail/ath11k/2020-November/000556.html -- https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ath11k: QCA6390 support on Linux 2020-11-06 6:24 ` Kalle Valo @ 2020-11-06 7:26 ` Kenny Johansson 0 siblings, 0 replies; 9+ messages in thread From: Kenny Johansson @ 2020-11-06 7:26 UTC (permalink / raw) To: Kalle Valo; +Cc: ath11k An update here, * 3650b228f83a 5.10-rc1 works intermittently, I would say less than 50%, but more than 25% of times. * fd5ad4d1e980 worked consistently for at least 10 boots. I will follow that discussion, it sounds like a good lead. (You correctly spotted the commit typo in my previous email.) On Fri, Nov 6, 2020 at 7:24 AM Kalle Valo <kvalo@codeaurora.org> wrote: > > Kenny Johansson <wirehell@gmail.com> writes: > > > Short story: > > * Firmware matches > > * Reverting 7fef431be9c9 does not work > > * fd5ad4d1e980 works > > * 3650b228f83a does not work > > An excellent summary, makes it a lot easier to understand what's > happening :) > > > Details: > > > > Firmware matches: > > ~/qca$ md5sum /lib/firmware/ath11k/QCA6390/hw2.0/* > > a101dc90f8e876f39383b60c9da64ec4 /lib/firmware/ath11k/QCA6390/hw2.0/amss.bin > > 4c0781f659d2b7d6bef10a2e3d457728 /lib/firmware/ath11k/QCA6390/hw2.0/board-2.bin > > d4c912a3501a3694a3f460d13de06d28 /lib/firmware/ath11k/QCA6390/hw2.0/m3.bin > > Good, we can rule out firmware corruption then. > > > The commit 3650b228f83a worked > > > > [ 7.452884] ath11k_pci 0000:6c:00.0: WARNING: ath11k PCI support is > > experimental! > > [ 7.452926] ath11k_pci 0000:6c:00.0: BAR 0: assigned [mem > > 0xb4200000-0xb42fffff 64bit] > > [ 7.452939] ath11k_pci 0000:6c:00.0: enabling device (0000 -> 0002) > > [ 7.941932] ath11k_pci 0000:6c:00.0: Respond mem req failed, > > result: 1, err: 0 > > [ 7.941933] ath11k_pci 0000:6c:00.0: qmi failed to respond fw mem req:-22 > > [ 7.952897] ath11k_pci 0000:6c:00.0: chip_id 0x0 chip_family 0xb > > board_id 0xff soc_id 0xffffffff > > [ 7.952897] ath11k_pci 0000:6c:00.0: fw_version 0x101c06cc > > fw_build_timestamp 2020-06-24 19:50 fw_build_id > > [ 8.156172] ath11k_pci 0000:6c:00.0 wlp108s0: renamed from wlan0 > > I think you have a typo here and you mean that commit fd5ad4d1e980 > worked, right? The one which is based on v5.9-rc6: > > fd5ad4d1e980 wcn36xx: Advertise beacon filtering support in bmps > > > I will try to use fd5ad4d1e980 a bit more to make sure it is not > > something intermittent, though I suspect not as the bringup-branch > > seemed to work consistently, while the latest seems consistently > > broken for me. > > Yes, it's a good idea to rule out all intermittent issues. This is a > weird problem and any randomness might confuse the testing results. > > Even if your symptoms are different I suspect this is related to Pavel's > problem, where the number one suspect is high physical addresses are > causing problems: > > http://lists.infradead.org/pipermail/ath11k/2020-November/000556.html > > -- > https://patchwork.kernel.org/project/linux-wireless/list/ > > https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-11-06 7:27 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-09-14 17:20 ath11k: QCA6390 support on Linux Kalle Valo 2020-09-14 17:20 ` Kalle Valo 2020-11-04 16:33 ` Kalle Valo 2020-11-04 16:33 ` Kalle Valo 2020-11-04 21:50 ` Kenny Johansson 2020-11-05 10:34 ` Kalle Valo 2020-11-05 21:47 ` Kenny Johansson 2020-11-06 6:24 ` Kalle Valo 2020-11-06 7:26 ` Kenny Johansson
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.