* [cip-dev] B@D run on Renesas board - issue @ 2017-11-02 10:05 Binh Thanh. Nguyen 2017-11-03 16:04 ` Robert Marshall 0 siblings, 1 reply; 17+ messages in thread From: Binh Thanh. Nguyen @ 2017-11-02 10:05 UTC (permalink / raw) To: cip-dev Hello Daniel, Robert, We are facing an issue when trying to run healthcheck using B at D on Renesas board. I would like to attach the log and the healthcheck script (we modified the healthcheck from Daniel) The boot action was passed, but after that, look like LAVA cannot send command to Board, only send "#" (it supposed to be "uname"). I wonder if you met same issue before? And if possible, please give us any hints you may have for debugging this issue! Best regards, Binh Nguyen -------------- next part -------------- A non-text attachment was scrubbed... Name: iwg20m-test-ramdisk.yaml Type: application/octet-stream Size: 1512 bytes Desc: iwg20m-test-ramdisk.yaml URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20171102/33dd411c/attachment-0001.obj> -------------- next part -------------- A non-text attachment was scrubbed... Name: logs.JPG Type: image/jpeg Size: 159978 bytes Desc: logs.JPG URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20171102/33dd411c/attachment-0001.jpe> ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-02 10:05 [cip-dev] B@D run on Renesas board - issue Binh Thanh. Nguyen @ 2017-11-03 16:04 ` Robert Marshall 2017-11-06 2:18 ` Daniel Sangorrin 0 siblings, 1 reply; 17+ messages in thread From: Robert Marshall @ 2017-11-03 16:04 UTC (permalink / raw) To: cip-dev "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: > Hello Daniel, Robert, > > We are facing an issue when trying to run healthcheck using B at D on Renesas board. > I would like to attach the log and the healthcheck script (we modified the healthcheck from Daniel) > > The boot action was passed, but after that, look like LAVA cannot send > command to Board, only send "#" (it supposed to be "uname"). > I wonder if you met same issue before? > And if possible, please give us any hints you may have for debugging this issue! > > Best regards, > Binh Nguyen Thanh Sorry for the delay in responding! That test is missing a deploy section (all commented out) are you trying to make the test too minimal? LAVA tends to swallow output if it is what is expected. Robert ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-03 16:04 ` Robert Marshall @ 2017-11-06 2:18 ` Daniel Sangorrin 2017-11-08 7:26 ` Binh Thanh. Nguyen 2017-11-15 10:21 ` Trung. Huynh 0 siblings, 2 replies; 17+ messages in thread From: Daniel Sangorrin @ 2017-11-06 2:18 UTC (permalink / raw) To: cip-dev Hello Binh-san, > -----Original Message----- > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > Sent: Saturday, November 04, 2017 1:05 AM > To: Binh Thanh. Nguyen > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. Huynh; cip-dev at lists.cip-project.org > Subject: Re: B at D run on Renesas board - issue > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: > > > Hello Daniel, Robert, > > > > We are facing an issue when trying to run healthcheck using B at D on Renesas board. > > I would like to attach the log and the healthcheck script (we modified the healthcheck from Daniel) > > > > The boot action was passed, but after that, look like LAVA cannot send > > command to Board, only send "#" (it supposed to be "uname"). > > I wonder if you met same issue before? > > And if possible, please give us any hints you may have for debugging this issue! > > > > Best regards, > > Binh Nguyen > > Thanh > > Sorry for the delay in responding! > > That test is missing a deploy section (all commented out) are you trying > to make the test too minimal? LAVA tends to swallow output if it is what > is expected. > > Robert As Robert said, please do not comment out the deploy section. LAVA does not just deploy the binaries as they are, it also copies some scripts (LAVA Test shell) into the ramdisk (or network filesystem). # LAVA does not use scp (or a serial protocol) to copy them into the target For deploying you need a PDU (remote power switch). If you don't have one you need to buy one and then add the corresponding commands. # Note: I use an IP Power 9258 remote PDU. # Note: do not think you can get around without a PDU* Thanks, Daniel *There are ways to do it but they have limitations https://validation.linaro.org/static/docs/v2/dispatcher-design.html#primary-connection ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-06 2:18 ` Daniel Sangorrin @ 2017-11-08 7:26 ` Binh Thanh. Nguyen 2017-11-15 10:21 ` Trung. Huynh 1 sibling, 0 replies; 17+ messages in thread From: Binh Thanh. Nguyen @ 2017-11-08 7:26 UTC (permalink / raw) To: cip-dev Hello Daniel, Robert, > Subject: RE: B at D run on Renesas board - issue > > Hello Binh-san, > > > -----Original Message----- > > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > > Sent: Saturday, November 04, 2017 1:05 AM > > To: Binh Thanh. Nguyen > > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. Huynh; > > cip-dev at lists.cip-project.org > > Subject: Re: B at D run on Renesas board - issue > > > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: > > > > > Hello Daniel, Robert, > > > > > > We are facing an issue when trying to run healthcheck using B at D on > Renesas board. > > > I would like to attach the log and the healthcheck script (we > > > modified the healthcheck from Daniel) > > > > > > The boot action was passed, but after that, look like LAVA cannot > > > send command to Board, only send "#" (it supposed to be "uname"). > > > I wonder if you met same issue before? > > > And if possible, please give us any hints you may have for debugging this > issue! > > > > > > Best regards, > > > Binh Nguyen > > > > Thanh > > > > Sorry for the delay in responding! > > > > That test is missing a deploy section (all commented out) are you > > trying to make the test too minimal? LAVA tends to swallow output if > > it is what is expected. > > > > Robert > > As Robert said, please do not comment out the deploy section. LAVA does not > just deploy the binaries as they are, it also copies some scripts (LAVA Test > shell) into the ramdisk (or network filesystem). > # LAVA does not use scp (or a serial protocol) to copy them into the target > > For deploying you need a PDU (remote power switch). If you don't have one > you need to buy one and then add the corresponding commands. > # Note: I use an IP Power 9258 remote PDU. > # Note: do not think you can get around without a PDU* Thank you for your feedback. We are now purchasing the PDU. > > Thanks, > Daniel > > *There are ways to do it but they have limitations > https://validation.linaro.org/static/docs/v2/dispatcher-design.html#primary- > connection > > > > Best regards, Binh Nguyen ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-06 2:18 ` Daniel Sangorrin 2017-11-08 7:26 ` Binh Thanh. Nguyen @ 2017-11-15 10:21 ` Trung. Huynh 2017-11-15 13:59 ` Robert Marshall 2017-11-16 8:11 ` Daniel Sangorrin 1 sibling, 2 replies; 17+ messages in thread From: Trung. Huynh @ 2017-11-15 10:21 UTC (permalink / raw) To: cip-dev Hi Daniel, Robert, We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our error log in attachment. I also take example log over here https://gitlab.com/snippets/1679749 to see that it can create a directory by mkdir /lava-1 Could you please tell us what does it make scene? How can we fix it? Thank you. P/S: healthcheck script same as Binh-san attached to you before Best Regards, Trung -----Original Message----- From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] Sent: Monday, November 6, 2017 9:19 AM To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' <Chris.Paterson2@renesas.com>; Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org Subject: RE: B at D run on Renesas board - issue Hello Binh-san, > -----Original Message----- > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > Sent: Saturday, November 04, 2017 1:05 AM > To: Binh Thanh. Nguyen > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. Huynh; > cip-dev at lists.cip-project.org > Subject: Re: B at D run on Renesas board - issue > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: > > > Hello Daniel, Robert, > > > > We are facing an issue when trying to run healthcheck using B at D on Renesas board. > > I would like to attach the log and the healthcheck script (we > > modified the healthcheck from Daniel) > > > > The boot action was passed, but after that, look like LAVA cannot > > send command to Board, only send "#" (it supposed to be "uname"). > > I wonder if you met same issue before? > > And if possible, please give us any hints you may have for debugging this issue! > > > > Best regards, > > Binh Nguyen > > Thanh > > Sorry for the delay in responding! > > That test is missing a deploy section (all commented out) are you > trying to make the test too minimal? LAVA tends to swallow output if > it is what is expected. > > Robert As Robert said, please do not comment out the deploy section. LAVA does not just deploy the binaries as they are, it also copies some scripts (LAVA Test shell) into the ramdisk (or network filesystem). # LAVA does not use scp (or a serial protocol) to copy them into the target For deploying you need a PDU (remote power switch). If you don't have one you need to buy one and then add the corresponding commands. # Note: I use an IP Power 9258 remote PDU. # Note: do not think you can get around without a PDU* Thanks, Daniel *There are ways to do it but they have limitations https://validation.linaro.org/static/docs/v2/dispatcher-design.html#primary-connection -------------- next part -------------- A non-text attachment was scrubbed... Name: Capture.jpg Type: image/jpeg Size: 132077 bytes Desc: Capture.jpg URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20171115/0251a3ad/attachment-0001.jpg> ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-15 10:21 ` Trung. Huynh @ 2017-11-15 13:59 ` Robert Marshall 2017-11-16 8:11 ` Daniel Sangorrin 1 sibling, 0 replies; 17+ messages in thread From: Robert Marshall @ 2017-11-15 13:59 UTC (permalink / raw) To: cip-dev Trung, The LAVA environment knows about those paths - I'd look into whether the prompts you get on logging in are the ones that LAVA is telling you that it is expecting? Robert "Trung. Huynh" <trung.huynh.uw@rvc.renesas.com> writes: > Hi Daniel, Robert, > > We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: > # /lava-237/bin/lava-test-runner /lava-237/0 > as you can see our error log in attachment. > I also take example log over here https://gitlab.com/snippets/1679749 > to see that it can create a directory by mkdir /lava-1 > > Could you please tell us what does it make scene? How can we fix it? > Thank you. > > P/S: healthcheck script same as Binh-san attached to you before > > Best Regards, > Trung > > -----Original Message----- > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] > Sent: Monday, November 6, 2017 9:19 AM > To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com> > Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' > <Chris.Paterson2@renesas.com>; Trung. Huynh > <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org > Subject: RE: B at D run on Renesas board - issue > > Hello Binh-san, > >> -----Original Message----- >> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] >> Sent: Saturday, November 04, 2017 1:05 AM >> To: Binh Thanh. Nguyen >> Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. Huynh; >> cip-dev at lists.cip-project.org >> Subject: Re: B at D run on Renesas board - issue >> >> "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: >> >> > Hello Daniel, Robert, >> > >> > We are facing an issue when trying to run healthcheck using B at D on Renesas board. >> > I would like to attach the log and the healthcheck script (we >> > modified the healthcheck from Daniel) >> > >> > The boot action was passed, but after that, look like LAVA cannot >> > send command to Board, only send "#" (it supposed to be "uname"). >> > I wonder if you met same issue before? >> > And if possible, please give us any hints you may have for debugging this issue! >> > >> > Best regards, >> > Binh Nguyen >> >> Thanh >> >> Sorry for the delay in responding! >> >> That test is missing a deploy section (all commented out) are you >> trying to make the test too minimal? LAVA tends to swallow output if >> it is what is expected. >> >> Robert > > As Robert said, please do not comment out the deploy section. LAVA does not just deploy the binaries as they are, it also copies some scripts (LAVA Test shell) into the ramdisk (or network filesystem). > # LAVA does not use scp (or a serial protocol) to copy them into the target > > For deploying you need a PDU (remote power switch). If you don't have one you need to buy one and then add the corresponding commands. > # Note: I use an IP Power 9258 remote PDU. > # Note: do not think you can get around without a PDU* > > Thanks, > Daniel > > *There are ways to do it but they have limitations https://validation.linaro.org/static/docs/v2/dispatcher-design.html#primary-connection ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-15 10:21 ` Trung. Huynh 2017-11-15 13:59 ` Robert Marshall @ 2017-11-16 8:11 ` Daniel Sangorrin 2017-11-16 8:48 ` Trung. Huynh 1 sibling, 1 reply; 17+ messages in thread From: Daniel Sangorrin @ 2017-11-16 8:11 UTC (permalink / raw) To: cip-dev Dear Trung san, > -----Original Message----- > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > Sent: Wednesday, November 15, 2017 7:21 PM > To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen > Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org > Subject: RE: B at D run on Renesas board - issue > > Hi Daniel, Robert, > > We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: > # /lava-237/bin/lava-test-runner /lava-237/0 > as you can see our error log in attachment. > I also take example log over here https://gitlab.com/snippets/1679749 > to see that it can create a directory by mkdir /lava-1 > > Could you please tell us what does it make scene? How can we fix it? > Thank you. Please could you send the complete log? > P/S: healthcheck script same as Binh-san attached to you before Did you make sure to uncomment the deploy section? Regards, Daniel > > Best Regards, > Trung > > -----Original Message----- > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] > Sent: Monday, November 6, 2017 9:19 AM > To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com> > Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' <Chris.Paterson2@renesas.com>; Trung. Huynh > <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org > Subject: RE: B at D run on Renesas board - issue > > Hello Binh-san, > > > -----Original Message----- > > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > > Sent: Saturday, November 04, 2017 1:05 AM > > To: Binh Thanh. Nguyen > > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. Huynh; > > cip-dev at lists.cip-project.org > > Subject: Re: B at D run on Renesas board - issue > > > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: > > > > > Hello Daniel, Robert, > > > > > > We are facing an issue when trying to run healthcheck using B at D on Renesas board. > > > I would like to attach the log and the healthcheck script (we > > > modified the healthcheck from Daniel) > > > > > > The boot action was passed, but after that, look like LAVA cannot > > > send command to Board, only send "#" (it supposed to be "uname"). > > > I wonder if you met same issue before? > > > And if possible, please give us any hints you may have for debugging this issue! > > > > > > Best regards, > > > Binh Nguyen > > > > Thanh > > > > Sorry for the delay in responding! > > > > That test is missing a deploy section (all commented out) are you > > trying to make the test too minimal? LAVA tends to swallow output if > > it is what is expected. > > > > Robert > > As Robert said, please do not comment out the deploy section. LAVA does not just deploy the binaries as they are, it also copies some > scripts (LAVA Test shell) into the ramdisk (or network filesystem). > # LAVA does not use scp (or a serial protocol) to copy them into the target > > For deploying you need a PDU (remote power switch). If you don't have one you need to buy one and then add the corresponding > commands. > # Note: I use an IP Power 9258 remote PDU. > # Note: do not think you can get around without a PDU* > > Thanks, > Daniel > > *There are ways to do it but they have limitations https://validation.linaro.org/static/docs/v2/dispatcher-design.html#primary- > connection > > > > ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-16 8:11 ` Daniel Sangorrin @ 2017-11-16 8:48 ` Trung. Huynh 2017-11-16 8:54 ` Daniel Sangorrin 0 siblings, 1 reply; 17+ messages in thread From: Trung. Huynh @ 2017-11-16 8:48 UTC (permalink / raw) To: cip-dev Dear Daniel, Thank for your reply. The log in attachment is took from lava for easily observing instead of html page. Regarding deploy section, YES, as you can see the log showing that has passed over it already to get into test section. Is there anything going wrong? Looking for your feedback Best Regards, Trung -----Original Message----- From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] Sent: Thursday, November 16, 2017 3:11 PM To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org Subject: RE: B at D run on Renesas board - issue Dear Trung san, > -----Original Message----- > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > Sent: Wednesday, November 15, 2017 7:21 PM > To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen > Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org > Subject: RE: B at D run on Renesas board - issue > > Hi Daniel, Robert, > > We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: > # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our error > log in attachment. > I also take example log over here https://gitlab.com/snippets/1679749 > to see that it can create a directory by mkdir /lava-1 > > Could you please tell us what does it make scene? How can we fix it? > Thank you. Please could you send the complete log? > P/S: healthcheck script same as Binh-san attached to you before Did you make sure to uncomment the deploy section? Regards, Daniel > > Best Regards, > Trung > > -----Original Message----- > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] > Sent: Monday, November 6, 2017 9:19 AM > To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. > Nguyen <binh.nguyen.uw@rvc.renesas.com> > Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' > <Chris.Paterson2@renesas.com>; Trung. Huynh > <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org > Subject: RE: B at D run on Renesas board - issue > > Hello Binh-san, > > > -----Original Message----- > > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > > Sent: Saturday, November 04, 2017 1:05 AM > > To: Binh Thanh. Nguyen > > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. Huynh; > > cip-dev at lists.cip-project.org > > Subject: Re: B at D run on Renesas board - issue > > > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: > > > > > Hello Daniel, Robert, > > > > > > We are facing an issue when trying to run healthcheck using B at D on Renesas board. > > > I would like to attach the log and the healthcheck script (we > > > modified the healthcheck from Daniel) > > > > > > The boot action was passed, but after that, look like LAVA cannot > > > send command to Board, only send "#" (it supposed to be "uname"). > > > I wonder if you met same issue before? > > > And if possible, please give us any hints you may have for debugging this issue! > > > > > > Best regards, > > > Binh Nguyen > > > > Thanh > > > > Sorry for the delay in responding! > > > > That test is missing a deploy section (all commented out) are you > > trying to make the test too minimal? LAVA tends to swallow output if > > it is what is expected. > > > > Robert > > As Robert said, please do not comment out the deploy section. LAVA > does not just deploy the binaries as they are, it also copies some scripts (LAVA Test shell) into the ramdisk (or network filesystem). > # LAVA does not use scp (or a serial protocol) to copy them into the > target > > For deploying you need a PDU (remote power switch). If you don't have > one you need to buy one and then add the corresponding commands. > # Note: I use an IP Power 9258 remote PDU. > # Note: do not think you can get around without a PDU* > > Thanks, > Daniel > > *There are ways to do it but they have limitations > https://validation.linaro.org/static/docs/v2/dispatcher-design.html#pr > imary- > connection > > > > -------------- next part -------------- A non-text attachment was scrubbed... Name: output.yaml Type: application/octet-stream Size: 85945 bytes Desc: output.yaml URL: <http://lists.cip-project.org/pipermail/cip-dev/attachments/20171116/c7dbefde/attachment-0001.obj> ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-16 8:48 ` Trung. Huynh @ 2017-11-16 8:54 ` Daniel Sangorrin 2017-11-17 9:18 ` Robert Marshall 0 siblings, 1 reply; 17+ messages in thread From: Daniel Sangorrin @ 2017-11-16 8:54 UTC (permalink / raw) To: cip-dev Dear Trung san > -----Original Message----- > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > Sent: Thursday, November 16, 2017 5:49 PM > To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen > Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org > Subject: RE: B at D run on Renesas board - issue > > Dear Daniel, > > Thank for your reply. > The log in attachment is took from lava for easily observing instead of html page. > Regarding deploy section, YES, as you can see the log showing that has passed over it already to get into test section. > > Is there anything going wrong? > Looking for your feedback > It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card. Regards, Daniel > Best Regards, > Trung > > -----Original Message----- > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] > Sent: Thursday, November 16, 2017 3:11 PM > To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen > <binh.nguyen.uw@rvc.renesas.com> > Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org > Subject: RE: B at D run on Renesas board - issue > > Dear Trung san, > > > -----Original Message----- > > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > > Sent: Wednesday, November 15, 2017 7:21 PM > > To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen > > Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org > > Subject: RE: B at D run on Renesas board - issue > > > > Hi Daniel, Robert, > > > > We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: > > # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our error > > log in attachment. > > I also take example log over here https://gitlab.com/snippets/1679749 > > to see that it can create a directory by mkdir /lava-1 > > > > Could you please tell us what does it make scene? How can we fix it? > > Thank you. > > Please could you send the complete log? > > > P/S: healthcheck script same as Binh-san attached to you before > > Did you make sure to uncomment the deploy section? > > Regards, > Daniel > > > > > Best Regards, > > Trung > > > > -----Original Message----- > > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] > > Sent: Monday, November 6, 2017 9:19 AM > > To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. > > Nguyen <binh.nguyen.uw@rvc.renesas.com> > > Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' > > <Chris.Paterson2@renesas.com>; Trung. Huynh > > <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org > > Subject: RE: B at D run on Renesas board - issue > > > > Hello Binh-san, > > > > > -----Original Message----- > > > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > > > Sent: Saturday, November 04, 2017 1:05 AM > > > To: Binh Thanh. Nguyen > > > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. Huynh; > > > cip-dev at lists.cip-project.org > > > Subject: Re: B at D run on Renesas board - issue > > > > > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: > > > > > > > Hello Daniel, Robert, > > > > > > > > We are facing an issue when trying to run healthcheck using B at D on Renesas board. > > > > I would like to attach the log and the healthcheck script (we > > > > modified the healthcheck from Daniel) > > > > > > > > The boot action was passed, but after that, look like LAVA cannot > > > > send command to Board, only send "#" (it supposed to be "uname"). > > > > I wonder if you met same issue before? > > > > And if possible, please give us any hints you may have for debugging this issue! > > > > > > > > Best regards, > > > > Binh Nguyen > > > > > > Thanh > > > > > > Sorry for the delay in responding! > > > > > > That test is missing a deploy section (all commented out) are you > > > trying to make the test too minimal? LAVA tends to swallow output if > > > it is what is expected. > > > > > > Robert > > > > As Robert said, please do not comment out the deploy section. LAVA > > does not just deploy the binaries as they are, it also copies some scripts (LAVA Test shell) into the ramdisk (or network filesystem). > > # LAVA does not use scp (or a serial protocol) to copy them into the > > target > > > > For deploying you need a PDU (remote power switch). If you don't have > > one you need to buy one and then add the corresponding commands. > > # Note: I use an IP Power 9258 remote PDU. > > # Note: do not think you can get around without a PDU* > > > > Thanks, > > Daniel > > > > *There are ways to do it but they have limitations > > https://validation.linaro.org/static/docs/v2/dispatcher-design.html#pr > > imary- > > connection > > > > > > > > > > ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-16 8:54 ` Daniel Sangorrin @ 2017-11-17 9:18 ` Robert Marshall 2017-11-27 10:45 ` Trung. Huynh 0 siblings, 1 reply; 17+ messages in thread From: Robert Marshall @ 2017-11-17 9:18 UTC (permalink / raw) To: cip-dev Hi "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes: > Dear Trung san > >> -----Original Message----- >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >> Sent: Thursday, November 16, 2017 5:49 PM >> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen >> Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org >> Subject: RE: B at D run on Renesas board - issue >> >> Dear Daniel, >> >> Thank for your reply. >> The log in attachment is took from lava for easily observing instead of html page. >> Regarding deploy section, YES, as you can see the log showing that >> has passed over it already to get into test section. >> >> Is there anything going wrong? >> Looking for your feedback >> > > It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card. > It would be useful to see the test yaml as it is now, but looking back in the thread the original has in the boot section: commands: sd you should change that to commands: ramdisk Robert > Regards, > Daniel > >> Best Regards, >> Trung >> >> -----Original Message----- >> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] >> Sent: Thursday, November 16, 2017 3:11 PM >> To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall' >> <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen >> <binh.nguyen.uw@rvc.renesas.com> >> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' >> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org >> Subject: RE: B at D run on Renesas board - issue >> >> Dear Trung san, >> >> > -----Original Message----- >> > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >> > Sent: Wednesday, November 15, 2017 7:21 PM >> > To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen >> > Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org >> > Subject: RE: B at D run on Renesas board - issue >> > >> > Hi Daniel, Robert, >> > >> > We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: >> > # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our error >> > log in attachment. >> > I also take example log over here https://gitlab.com/snippets/1679749 >> > to see that it can create a directory by mkdir /lava-1 >> > >> > Could you please tell us what does it make scene? How can we fix it? >> > Thank you. >> >> Please could you send the complete log? >> >> > P/S: healthcheck script same as Binh-san attached to you before >> >> Did you make sure to uncomment the deploy section? >> >> Regards, >> Daniel >> >> > >> > Best Regards, >> > Trung >> > >> > -----Original Message----- >> > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] >> > Sent: Monday, November 6, 2017 9:19 AM >> > To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. >> > Nguyen <binh.nguyen.uw@rvc.renesas.com> >> > Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' >> > <Chris.Paterson2@renesas.com>; Trung. Huynh >> > <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org >> > Subject: RE: B at D run on Renesas board - issue >> > >> > Hello Binh-san, >> > >> > > -----Original Message----- >> > > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] >> > > Sent: Saturday, November 04, 2017 1:05 AM >> > > To: Binh Thanh. Nguyen >> > > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. Huynh; >> > > cip-dev at lists.cip-project.org >> > > Subject: Re: B at D run on Renesas board - issue >> > > >> > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: >> > > >> > > > Hello Daniel, Robert, >> > > > >> > > > We are facing an issue when trying to run healthcheck using B at D on Renesas board. >> > > > I would like to attach the log and the healthcheck script (we >> > > > modified the healthcheck from Daniel) >> > > > >> > > > The boot action was passed, but after that, look like LAVA cannot >> > > > send command to Board, only send "#" (it supposed to be "uname"). >> > > > I wonder if you met same issue before? >> > > > And if possible, please give us any hints you may have for debugging this issue! >> > > > >> > > > Best regards, >> > > > Binh Nguyen >> > > >> > > Thanh >> > > >> > > Sorry for the delay in responding! >> > > >> > > That test is missing a deploy section (all commented out) are you >> > > trying to make the test too minimal? LAVA tends to swallow output if >> > > it is what is expected. >> > > >> > > Robert >> > >> > As Robert said, please do not comment out the deploy section. LAVA >> > does not just deploy the binaries as they are, it also copies some >> > scripts (LAVA Test shell) into the ramdisk (or network >> > filesystem). >> > # LAVA does not use scp (or a serial protocol) to copy them into the >> > target >> > >> > For deploying you need a PDU (remote power switch). If you don't have >> > one you need to buy one and then add the corresponding commands. >> > # Note: I use an IP Power 9258 remote PDU. >> > # Note: do not think you can get around without a PDU* >> > >> > Thanks, >> > Daniel >> > >> > *There are ways to do it but they have limitations >> > https://validation.linaro.org/static/docs/v2/dispatcher-design.html#pr >> > imary- >> > connection >> > >> > >> > >> > >> >> ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-17 9:18 ` Robert Marshall @ 2017-11-27 10:45 ` Trung. Huynh 2017-11-30 7:53 ` Daniel Sangorrin 0 siblings, 1 reply; 17+ messages in thread From: Trung. Huynh @ 2017-11-27 10:45 UTC (permalink / raw) To: cip-dev Dear Daniel, Robert, Thank for your advices. BTW, could you please give me uImage and device tree file as well as file system you have already built to use in your sample test? I appreciate that. Regards, Trung -----Original Message----- From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] Sent: Friday, November 17, 2017 4:18 PM To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> Cc: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org Subject: Re: B at D run on Renesas board - issue Hi "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes: > Dear Trung san > >> -----Original Message----- >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >> Sent: Thursday, November 16, 2017 5:49 PM >> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen >> Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org >> Subject: RE: B at D run on Renesas board - issue >> >> Dear Daniel, >> >> Thank for your reply. >> The log in attachment is took from lava for easily observing instead of html page. >> Regarding deploy section, YES, as you can see the log showing that >> has passed over it already to get into test section. >> >> Is there anything going wrong? >> Looking for your feedback >> > > It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card. > It would be useful to see the test yaml as it is now, but looking back in the thread the original has in the boot section: commands: sd you should change that to commands: ramdisk Robert > Regards, > Daniel > >> Best Regards, >> Trung >> >> -----Original Message----- >> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] >> Sent: Thursday, November 16, 2017 3:11 PM >> To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall' >> <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen >> <binh.nguyen.uw@rvc.renesas.com> >> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' >> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org >> Subject: RE: B at D run on Renesas board - issue >> >> Dear Trung san, >> >> > -----Original Message----- >> > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >> > Sent: Wednesday, November 15, 2017 7:21 PM >> > To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen >> > Cc: O365-Toru Oishi; 'Chris Paterson'; >> > cip-dev at lists.cip-project.org >> > Subject: RE: B at D run on Renesas board - issue >> > >> > Hi Daniel, Robert, >> > >> > We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: >> > # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our >> > error log in attachment. >> > I also take example log over here >> > https://gitlab.com/snippets/1679749 >> > to see that it can create a directory by mkdir /lava-1 >> > >> > Could you please tell us what does it make scene? How can we fix it? >> > Thank you. >> >> Please could you send the complete log? >> >> > P/S: healthcheck script same as Binh-san attached to you before >> >> Did you make sure to uncomment the deploy section? >> >> Regards, >> Daniel >> >> > >> > Best Regards, >> > Trung >> > >> > -----Original Message----- >> > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] >> > Sent: Monday, November 6, 2017 9:19 AM >> > To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. >> > Nguyen <binh.nguyen.uw@rvc.renesas.com> >> > Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' >> > <Chris.Paterson2@renesas.com>; Trung. Huynh >> > <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org >> > Subject: RE: B at D run on Renesas board - issue >> > >> > Hello Binh-san, >> > >> > > -----Original Message----- >> > > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] >> > > Sent: Saturday, November 04, 2017 1:05 AM >> > > To: Binh Thanh. Nguyen >> > > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. >> > > Huynh; cip-dev at lists.cip-project.org >> > > Subject: Re: B at D run on Renesas board - issue >> > > >> > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: >> > > >> > > > Hello Daniel, Robert, >> > > > >> > > > We are facing an issue when trying to run healthcheck using B at D on Renesas board. >> > > > I would like to attach the log and the healthcheck script (we >> > > > modified the healthcheck from Daniel) >> > > > >> > > > The boot action was passed, but after that, look like LAVA >> > > > cannot send command to Board, only send "#" (it supposed to be "uname"). >> > > > I wonder if you met same issue before? >> > > > And if possible, please give us any hints you may have for debugging this issue! >> > > > >> > > > Best regards, >> > > > Binh Nguyen >> > > >> > > Thanh >> > > >> > > Sorry for the delay in responding! >> > > >> > > That test is missing a deploy section (all commented out) are you >> > > trying to make the test too minimal? LAVA tends to swallow output >> > > if it is what is expected. >> > > >> > > Robert >> > >> > As Robert said, please do not comment out the deploy section. LAVA >> > does not just deploy the binaries as they are, it also copies some >> > scripts (LAVA Test shell) into the ramdisk (or network filesystem). >> > # LAVA does not use scp (or a serial protocol) to copy them into >> > the target >> > >> > For deploying you need a PDU (remote power switch). If you don't >> > have one you need to buy one and then add the corresponding commands. >> > # Note: I use an IP Power 9258 remote PDU. >> > # Note: do not think you can get around without a PDU* >> > >> > Thanks, >> > Daniel >> > >> > *There are ways to do it but they have limitations >> > https://validation.linaro.org/static/docs/v2/dispatcher-design.html >> > #pr >> > imary- >> > connection >> > >> > >> > >> > >> >> ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-27 10:45 ` Trung. Huynh @ 2017-11-30 7:53 ` Daniel Sangorrin 2017-11-30 9:09 ` Robert Marshall 2017-11-30 19:42 ` Agustin Benito Bethencourt 0 siblings, 2 replies; 17+ messages in thread From: Daniel Sangorrin @ 2017-11-30 7:53 UTC (permalink / raw) To: cip-dev Hi Trung, Agustin, Robert > -----Original Message----- > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > Sent: Monday, November 27, 2017 7:45 PM > To: Robert Marshall; Daniel Sangorrin > Cc: Binh Thanh. Nguyen; O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org > Subject: RE: B at D run on Renesas board - issue > > Dear Daniel, Robert, > > Thank for your advices. > BTW, could you please give me uImage and device tree file as well as file system you have already built to use in your sample test? > I appreciate that. I was planning to upload them to B at D AWS S3 account, but I haven't received an account yet. Agustin: could you try again please? should I send you some information? Robert: should I send the patches again to make sure that everyone is running the same code? Best regards, Daniel > -----Original Message----- > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > Sent: Friday, November 17, 2017 4:18 PM > To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> > Cc: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi > <toru.oishi.zj@renesas.com>; 'Chris Paterson' <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org > Subject: Re: B at D run on Renesas board - issue > > Hi > > "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes: > > > Dear Trung san > > > >> -----Original Message----- > >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > >> Sent: Thursday, November 16, 2017 5:49 PM > >> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen > >> Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org > >> Subject: RE: B at D run on Renesas board - issue > >> > >> Dear Daniel, > >> > >> Thank for your reply. > >> The log in attachment is took from lava for easily observing instead of html page. > >> Regarding deploy section, YES, as you can see the log showing that > >> has passed over it already to get into test section. > >> > >> Is there anything going wrong? > >> Looking for your feedback > >> > > > > It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card. > > > > It would be useful to see the test yaml as it is now, but looking back in the thread the original has in the boot section: > > commands: sd > > you should change that to > > commands: ramdisk > > Robert > > > Regards, > > Daniel > > > >> Best Regards, > >> Trung > >> > >> -----Original Message----- > >> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] > >> Sent: Thursday, November 16, 2017 3:11 PM > >> To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall' > >> <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen > >> <binh.nguyen.uw@rvc.renesas.com> > >> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' > >> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org > >> Subject: RE: B at D run on Renesas board - issue > >> > >> Dear Trung san, > >> > >> > -----Original Message----- > >> > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > >> > Sent: Wednesday, November 15, 2017 7:21 PM > >> > To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen > >> > Cc: O365-Toru Oishi; 'Chris Paterson'; > >> > cip-dev at lists.cip-project.org > >> > Subject: RE: B at D run on Renesas board - issue > >> > > >> > Hi Daniel, Robert, > >> > > >> > We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: > >> > # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our > >> > error log in attachment. > >> > I also take example log over here > >> > https://gitlab.com/snippets/1679749 > >> > to see that it can create a directory by mkdir /lava-1 > >> > > >> > Could you please tell us what does it make scene? How can we fix it? > >> > Thank you. > >> > >> Please could you send the complete log? > >> > >> > P/S: healthcheck script same as Binh-san attached to you before > >> > >> Did you make sure to uncomment the deploy section? > >> > >> Regards, > >> Daniel > >> > >> > > >> > Best Regards, > >> > Trung > >> > > >> > -----Original Message----- > >> > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] > >> > Sent: Monday, November 6, 2017 9:19 AM > >> > To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. > >> > Nguyen <binh.nguyen.uw@rvc.renesas.com> > >> > Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' > >> > <Chris.Paterson2@renesas.com>; Trung. Huynh > >> > <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org > >> > Subject: RE: B at D run on Renesas board - issue > >> > > >> > Hello Binh-san, > >> > > >> > > -----Original Message----- > >> > > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > >> > > Sent: Saturday, November 04, 2017 1:05 AM > >> > > To: Binh Thanh. Nguyen > >> > > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. > >> > > Huynh; cip-dev at lists.cip-project.org > >> > > Subject: Re: B at D run on Renesas board - issue > >> > > > >> > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: > >> > > > >> > > > Hello Daniel, Robert, > >> > > > > >> > > > We are facing an issue when trying to run healthcheck using B at D on Renesas board. > >> > > > I would like to attach the log and the healthcheck script (we > >> > > > modified the healthcheck from Daniel) > >> > > > > >> > > > The boot action was passed, but after that, look like LAVA > >> > > > cannot send command to Board, only send "#" (it supposed to be "uname"). > >> > > > I wonder if you met same issue before? > >> > > > And if possible, please give us any hints you may have for debugging this issue! > >> > > > > >> > > > Best regards, > >> > > > Binh Nguyen > >> > > > >> > > Thanh > >> > > > >> > > Sorry for the delay in responding! > >> > > > >> > > That test is missing a deploy section (all commented out) are you > >> > > trying to make the test too minimal? LAVA tends to swallow output > >> > > if it is what is expected. > >> > > > >> > > Robert > >> > > >> > As Robert said, please do not comment out the deploy section. LAVA > >> > does not just deploy the binaries as they are, it also copies some > >> > scripts (LAVA Test shell) into the ramdisk (or network filesystem). > >> > # LAVA does not use scp (or a serial protocol) to copy them into > >> > the target > >> > > >> > For deploying you need a PDU (remote power switch). If you don't > >> > have one you need to buy one and then add the corresponding commands. > >> > # Note: I use an IP Power 9258 remote PDU. > >> > # Note: do not think you can get around without a PDU* > >> > > >> > Thanks, > >> > Daniel > >> > > >> > *There are ways to do it but they have limitations > >> > https://validation.linaro.org/static/docs/v2/dispatcher-design.html > >> > #pr > >> > imary- > >> > connection > >> > > >> > > >> > > >> > > >> > >> ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-30 7:53 ` Daniel Sangorrin @ 2017-11-30 9:09 ` Robert Marshall 2017-11-30 19:42 ` Agustin Benito Bethencourt 1 sibling, 0 replies; 17+ messages in thread From: Robert Marshall @ 2017-11-30 9:09 UTC (permalink / raw) To: cip-dev "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes: > Hi Trung, Agustin, Robert > >> -----Original Message----- >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >> Sent: Monday, November 27, 2017 7:45 PM >> To: Robert Marshall; Daniel Sangorrin >> Cc: Binh Thanh. Nguyen; O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org >> Subject: RE: B at D run on Renesas board - issue >> >> Dear Daniel, Robert, >> >> Thank for your advices. >> BTW, could you please give me uImage and device tree file as well as >> file system you have already built to use in your sample test? >> I appreciate that. > > I was planning to upload them to B at D AWS S3 account, but I haven't received an account yet. > Agustin: could you try again please? should I send you some information? > Robert: should I send the patches again to make sure that everyone is running the same code? > Daniel I think your changes are all in Tom's mirror of the repos but they haven't been merged in yet https://gitlab.com/tpollard/board-at-desk-single-dev/tree/master Let me see if this can be MR'ed! Robert > Best regards, > Daniel > >> -----Original Message----- >> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] >> Sent: Friday, November 17, 2017 4:18 PM >> To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> >> Cc: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; Binh >> Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi >> <toru.oishi.zj@renesas.com>; 'Chris Paterson' <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org >> Subject: Re: B at D run on Renesas board - issue >> >> Hi >> >> "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes: >> >> > Dear Trung san >> > >> >> -----Original Message----- >> >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >> >> Sent: Thursday, November 16, 2017 5:49 PM >> >> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen >> >> Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org >> >> Subject: RE: B at D run on Renesas board - issue >> >> >> >> Dear Daniel, >> >> >> >> Thank for your reply. >> >> The log in attachment is took from lava for easily observing instead of html page. >> >> Regarding deploy section, YES, as you can see the log showing that >> >> has passed over it already to get into test section. >> >> >> >> Is there anything going wrong? >> >> Looking for your feedback >> >> >> > >> > It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card. >> > >> >> It would be useful to see the test yaml as it is now, but looking >> back in the thread the original has in the boot section: >> >> commands: sd >> >> you should change that to >> >> commands: ramdisk >> >> Robert >> >> > Regards, >> > Daniel >> > >> >> Best Regards, >> >> Trung >> >> >> >> -----Original Message----- >> >> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] >> >> Sent: Thursday, November 16, 2017 3:11 PM >> >> To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall' >> >> <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen >> >> <binh.nguyen.uw@rvc.renesas.com> >> >> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' >> >> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org >> >> Subject: RE: B at D run on Renesas board - issue >> >> >> >> Dear Trung san, >> >> >> >> > -----Original Message----- >> >> > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >> >> > Sent: Wednesday, November 15, 2017 7:21 PM >> >> > To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen >> >> > Cc: O365-Toru Oishi; 'Chris Paterson'; >> >> > cip-dev at lists.cip-project.org >> >> > Subject: RE: B at D run on Renesas board - issue >> >> > >> >> > Hi Daniel, Robert, >> >> > >> >> > We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: >> >> > # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our >> >> > error log in attachment. >> >> > I also take example log over here >> >> > https://gitlab.com/snippets/1679749 >> >> > to see that it can create a directory by mkdir /lava-1 >> >> > >> >> > Could you please tell us what does it make scene? How can we fix it? >> >> > Thank you. >> >> >> >> Please could you send the complete log? >> >> >> >> > P/S: healthcheck script same as Binh-san attached to you before >> >> >> >> Did you make sure to uncomment the deploy section? >> >> >> >> Regards, >> >> Daniel >> >> >> >> > >> >> > Best Regards, >> >> > Trung >> >> > >> >> > -----Original Message----- >> >> > From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] >> >> > Sent: Monday, November 6, 2017 9:19 AM >> >> > To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. >> >> > Nguyen <binh.nguyen.uw@rvc.renesas.com> >> >> > Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' >> >> > <Chris.Paterson2@renesas.com>; Trung. Huynh >> >> > <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org >> >> > Subject: RE: B at D run on Renesas board - issue >> >> > >> >> > Hello Binh-san, >> >> > >> >> > > -----Original Message----- >> >> > > From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] >> >> > > Sent: Saturday, November 04, 2017 1:05 AM >> >> > > To: Binh Thanh. Nguyen >> >> > > Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. >> >> > > Huynh; cip-dev at lists.cip-project.org >> >> > > Subject: Re: B at D run on Renesas board - issue >> >> > > >> >> > > "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: >> >> > > >> >> > > > Hello Daniel, Robert, >> >> > > > >> >> > > > We are facing an issue when trying to run healthcheck using B at D on Renesas board. >> >> > > > I would like to attach the log and the healthcheck script (we >> >> > > > modified the healthcheck from Daniel) >> >> > > > >> >> > > > The boot action was passed, but after that, look like LAVA >> >> > > > cannot send command to Board, only send "#" (it supposed to be "uname"). >> >> > > > I wonder if you met same issue before? >> >> > > > And if possible, please give us any hints you may have for debugging this issue! >> >> > > > >> >> > > > Best regards, >> >> > > > Binh Nguyen >> >> > > >> >> > > Thanh >> >> > > >> >> > > Sorry for the delay in responding! >> >> > > >> >> > > That test is missing a deploy section (all commented out) are you >> >> > > trying to make the test too minimal? LAVA tends to swallow output >> >> > > if it is what is expected. >> >> > > >> >> > > Robert >> >> > >> >> > As Robert said, please do not comment out the deploy section. LAVA >> >> > does not just deploy the binaries as they are, it also copies some >> >> > scripts (LAVA Test shell) into the ramdisk (or network filesystem). >> >> > # LAVA does not use scp (or a serial protocol) to copy them into >> >> > the target >> >> > >> >> > For deploying you need a PDU (remote power switch). If you don't >> >> > have one you need to buy one and then add the corresponding commands. >> >> > # Note: I use an IP Power 9258 remote PDU. >> >> > # Note: do not think you can get around without a PDU* >> >> > >> >> > Thanks, >> >> > Daniel >> >> > >> >> > *There are ways to do it but they have limitations >> >> > https://validation.linaro.org/static/docs/v2/dispatcher-design.html >> >> > #pr >> >> > imary- >> >> > connection >> >> > >> >> > >> >> > >> >> > >> >> >> >> ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-30 7:53 ` Daniel Sangorrin 2017-11-30 9:09 ` Robert Marshall @ 2017-11-30 19:42 ` Agustin Benito Bethencourt 2017-12-05 9:09 ` Trung. Huynh 1 sibling, 1 reply; 17+ messages in thread From: Agustin Benito Bethencourt @ 2017-11-30 19:42 UTC (permalink / raw) To: cip-dev Hi, On 29/11/17 23:53, Daniel Sangorrin wrote: > Hi Trung, Agustin, Robert > >> -----Original Message----- >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >> Sent: Monday, November 27, 2017 7:45 PM >> To: Robert Marshall; Daniel Sangorrin >> Cc: Binh Thanh. Nguyen; O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org >> Subject: RE: B at D run on Renesas board - issue >> >> Dear Daniel, Robert, >> >> Thank for your advices. >> BTW, could you please give me uImage and device tree file as well as file system you have already built to use in your sample test? >> I appreciate that. > > I was planning to upload them to B at D AWS S3 account, but I haven't received an account yet. > Agustin: could you try again please? should I send you some information? I am travelling. Will do it Mon or Tue next week. Sorry about this delay. You should have full access to S3. > Robert: should I send the patches again to make sure that everyone is running the same code? > > Best regards, > Daniel > >> -----Original Message----- >> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] >> Sent: Friday, November 17, 2017 4:18 PM >> To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> >> Cc: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi >> <toru.oishi.zj@renesas.com>; 'Chris Paterson' <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org >> Subject: Re: B at D run on Renesas board - issue >> >> Hi >> >> "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes: >> >>> Dear Trung san >>> >>>> -----Original Message----- >>>> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >>>> Sent: Thursday, November 16, 2017 5:49 PM >>>> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen >>>> Cc: O365-Toru Oishi; 'Chris Paterson'; cip-dev at lists.cip-project.org >>>> Subject: RE: B at D run on Renesas board - issue >>>> >>>> Dear Daniel, >>>> >>>> Thank for your reply. >>>> The log in attachment is took from lava for easily observing instead of html page. >>>> Regarding deploy section, YES, as you can see the log showing that >>>> has passed over it already to get into test section. >>>> >>>> Is there anything going wrong? >>>> Looking for your feedback >>>> >>> >>> It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card. >>> >> >> It would be useful to see the test yaml as it is now, but looking back in the thread the original has in the boot section: >> >> commands: sd >> >> you should change that to >> >> commands: ramdisk >> >> Robert >> >>> Regards, >>> Daniel >>> >>>> Best Regards, >>>> Trung >>>> >>>> -----Original Message----- >>>> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] >>>> Sent: Thursday, November 16, 2017 3:11 PM >>>> To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall' >>>> <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen >>>> <binh.nguyen.uw@rvc.renesas.com> >>>> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' >>>> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org >>>> Subject: RE: B at D run on Renesas board - issue >>>> >>>> Dear Trung san, >>>> >>>>> -----Original Message----- >>>>> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >>>>> Sent: Wednesday, November 15, 2017 7:21 PM >>>>> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen >>>>> Cc: O365-Toru Oishi; 'Chris Paterson'; >>>>> cip-dev at lists.cip-project.org >>>>> Subject: RE: B at D run on Renesas board - issue >>>>> >>>>> Hi Daniel, Robert, >>>>> >>>>> We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: >>>>> # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our >>>>> error log in attachment. >>>>> I also take example log over here >>>>> https://gitlab.com/snippets/1679749 >>>>> to see that it can create a directory by mkdir /lava-1 >>>>> >>>>> Could you please tell us what does it make scene? How can we fix it? >>>>> Thank you. >>>> >>>> Please could you send the complete log? >>>> >>>>> P/S: healthcheck script same as Binh-san attached to you before >>>> >>>> Did you make sure to uncomment the deploy section? >>>> >>>> Regards, >>>> Daniel >>>> >>>>> >>>>> Best Regards, >>>>> Trung >>>>> >>>>> -----Original Message----- >>>>> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] >>>>> Sent: Monday, November 6, 2017 9:19 AM >>>>> To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. >>>>> Nguyen <binh.nguyen.uw@rvc.renesas.com> >>>>> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' >>>>> <Chris.Paterson2@renesas.com>; Trung. Huynh >>>>> <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org >>>>> Subject: RE: B at D run on Renesas board - issue >>>>> >>>>> Hello Binh-san, >>>>> >>>>>> -----Original Message----- >>>>>> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] >>>>>> Sent: Saturday, November 04, 2017 1:05 AM >>>>>> To: Binh Thanh. Nguyen >>>>>> Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. >>>>>> Huynh; cip-dev at lists.cip-project.org >>>>>> Subject: Re: B at D run on Renesas board - issue >>>>>> >>>>>> "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: >>>>>> >>>>>>> Hello Daniel, Robert, >>>>>>> >>>>>>> We are facing an issue when trying to run healthcheck using B at D on Renesas board. >>>>>>> I would like to attach the log and the healthcheck script (we >>>>>>> modified the healthcheck from Daniel) >>>>>>> >>>>>>> The boot action was passed, but after that, look like LAVA >>>>>>> cannot send command to Board, only send "#" (it supposed to be "uname"). >>>>>>> I wonder if you met same issue before? >>>>>>> And if possible, please give us any hints you may have for debugging this issue! >>>>>>> >>>>>>> Best regards, >>>>>>> Binh Nguyen >>>>>> >>>>>> Thanh >>>>>> >>>>>> Sorry for the delay in responding! >>>>>> >>>>>> That test is missing a deploy section (all commented out) are you >>>>>> trying to make the test too minimal? LAVA tends to swallow output >>>>>> if it is what is expected. >>>>>> >>>>>> Robert >>>>> >>>>> As Robert said, please do not comment out the deploy section. LAVA >>>>> does not just deploy the binaries as they are, it also copies some >>>>> scripts (LAVA Test shell) into the ramdisk (or network filesystem). >>>>> # LAVA does not use scp (or a serial protocol) to copy them into >>>>> the target >>>>> >>>>> For deploying you need a PDU (remote power switch). If you don't >>>>> have one you need to buy one and then add the corresponding commands. >>>>> # Note: I use an IP Power 9258 remote PDU. >>>>> # Note: do not think you can get around without a PDU* >>>>> >>>>> Thanks, >>>>> Daniel >>>>> >>>>> *There are ways to do it but they have limitations >>>>> https://validation.linaro.org/static/docs/v2/dispatcher-design.html >>>>> #pr >>>>> imary- >>>>> connection >>>>> >>>>> >>>>> >>>>> >>>> >>>> > > > > -- Agustin Benito Bethencourt Principal Consultant - FOSS at Codethink agustin.benito at codethink.co.uk ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-11-30 19:42 ` Agustin Benito Bethencourt @ 2017-12-05 9:09 ` Trung. Huynh 2017-12-11 6:46 ` Daniel Sangorrin 0 siblings, 1 reply; 17+ messages in thread From: Trung. Huynh @ 2017-12-05 9:09 UTC (permalink / raw) To: cip-dev Dear Daniel, Once they to become ready for download, please ping me, thank you! Regards, Trung -----Original Message----- From: cip-dev-bounces@lists.cip-project.org [mailto:cip-dev-bounces at lists.cip-project.org] On Behalf Of Agustin Benito Bethencourt Sent: Friday, December 1, 2017 2:42 AM To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> Cc: Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi <toru.oishi.zj@renesas.com>; cip-dev at lists.cip-project.org Subject: Re: [cip-dev] B at D run on Renesas board - issue Hi, On 29/11/17 23:53, Daniel Sangorrin wrote: > Hi Trung, Agustin, Robert > >> -----Original Message----- >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >> Sent: Monday, November 27, 2017 7:45 PM >> To: Robert Marshall; Daniel Sangorrin >> Cc: Binh Thanh. Nguyen; O365-Toru Oishi; 'Chris Paterson'; >> cip-dev at lists.cip-project.org >> Subject: RE: B at D run on Renesas board - issue >> >> Dear Daniel, Robert, >> >> Thank for your advices. >> BTW, could you please give me uImage and device tree file as well as file system you have already built to use in your sample test? >> I appreciate that. > > I was planning to upload them to B at D AWS S3 account, but I haven't received an account yet. > Agustin: could you try again please? should I send you some information? I am travelling. Will do it Mon or Tue next week. Sorry about this delay. You should have full access to S3. > Robert: should I send the patches again to make sure that everyone is running the same code? > > Best regards, > Daniel > >> -----Original Message----- >> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] >> Sent: Friday, November 17, 2017 4:18 PM >> To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> >> Cc: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; Binh Thanh. Nguyen >> <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi >> <toru.oishi.zj@renesas.com>; 'Chris Paterson' >> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org >> Subject: Re: B at D run on Renesas board - issue >> >> Hi >> >> "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes: >> >>> Dear Trung san >>> >>>> -----Original Message----- >>>> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >>>> Sent: Thursday, November 16, 2017 5:49 PM >>>> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen >>>> Cc: O365-Toru Oishi; 'Chris Paterson'; >>>> cip-dev at lists.cip-project.org >>>> Subject: RE: B at D run on Renesas board - issue >>>> >>>> Dear Daniel, >>>> >>>> Thank for your reply. >>>> The log in attachment is took from lava for easily observing instead of html page. >>>> Regarding deploy section, YES, as you can see the log showing that >>>> has passed over it already to get into test section. >>>> >>>> Is there anything going wrong? >>>> Looking for your feedback >>>> >>> >>> It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card. >>> >> >> It would be useful to see the test yaml as it is now, but looking back in the thread the original has in the boot section: >> >> commands: sd >> >> you should change that to >> >> commands: ramdisk >> >> Robert >> >>> Regards, >>> Daniel >>> >>>> Best Regards, >>>> Trung >>>> >>>> -----Original Message----- >>>> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] >>>> Sent: Thursday, November 16, 2017 3:11 PM >>>> To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall' >>>> <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen >>>> <binh.nguyen.uw@rvc.renesas.com> >>>> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' >>>> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org >>>> Subject: RE: B at D run on Renesas board - issue >>>> >>>> Dear Trung san, >>>> >>>>> -----Original Message----- >>>>> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] >>>>> Sent: Wednesday, November 15, 2017 7:21 PM >>>>> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen >>>>> Cc: O365-Toru Oishi; 'Chris Paterson'; >>>>> cip-dev at lists.cip-project.org >>>>> Subject: RE: B at D run on Renesas board - issue >>>>> >>>>> Hi Daniel, Robert, >>>>> >>>>> We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: >>>>> # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our >>>>> error log in attachment. >>>>> I also take example log over here >>>>> https://gitlab.com/snippets/1679749 >>>>> to see that it can create a directory by mkdir /lava-1 >>>>> >>>>> Could you please tell us what does it make scene? How can we fix it? >>>>> Thank you. >>>> >>>> Please could you send the complete log? >>>> >>>>> P/S: healthcheck script same as Binh-san attached to you before >>>> >>>> Did you make sure to uncomment the deploy section? >>>> >>>> Regards, >>>> Daniel >>>> >>>>> >>>>> Best Regards, >>>>> Trung >>>>> >>>>> -----Original Message----- >>>>> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] >>>>> Sent: Monday, November 6, 2017 9:19 AM >>>>> To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. >>>>> Nguyen <binh.nguyen.uw@rvc.renesas.com> >>>>> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' >>>>> <Chris.Paterson2@renesas.com>; Trung. Huynh >>>>> <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org >>>>> Subject: RE: B at D run on Renesas board - issue >>>>> >>>>> Hello Binh-san, >>>>> >>>>>> -----Original Message----- >>>>>> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] >>>>>> Sent: Saturday, November 04, 2017 1:05 AM >>>>>> To: Binh Thanh. Nguyen >>>>>> Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. >>>>>> Huynh; cip-dev at lists.cip-project.org >>>>>> Subject: Re: B at D run on Renesas board - issue >>>>>> >>>>>> "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: >>>>>> >>>>>>> Hello Daniel, Robert, >>>>>>> >>>>>>> We are facing an issue when trying to run healthcheck using B at D on Renesas board. >>>>>>> I would like to attach the log and the healthcheck script (we >>>>>>> modified the healthcheck from Daniel) >>>>>>> >>>>>>> The boot action was passed, but after that, look like LAVA >>>>>>> cannot send command to Board, only send "#" (it supposed to be "uname"). >>>>>>> I wonder if you met same issue before? >>>>>>> And if possible, please give us any hints you may have for debugging this issue! >>>>>>> >>>>>>> Best regards, >>>>>>> Binh Nguyen >>>>>> >>>>>> Thanh >>>>>> >>>>>> Sorry for the delay in responding! >>>>>> >>>>>> That test is missing a deploy section (all commented out) are you >>>>>> trying to make the test too minimal? LAVA tends to swallow output >>>>>> if it is what is expected. >>>>>> >>>>>> Robert >>>>> >>>>> As Robert said, please do not comment out the deploy section. LAVA >>>>> does not just deploy the binaries as they are, it also copies some >>>>> scripts (LAVA Test shell) into the ramdisk (or network filesystem). >>>>> # LAVA does not use scp (or a serial protocol) to copy them into >>>>> the target >>>>> >>>>> For deploying you need a PDU (remote power switch). If you don't >>>>> have one you need to buy one and then add the corresponding commands. >>>>> # Note: I use an IP Power 9258 remote PDU. >>>>> # Note: do not think you can get around without a PDU* >>>>> >>>>> Thanks, >>>>> Daniel >>>>> >>>>> *There are ways to do it but they have limitations >>>>> https://validation.linaro.org/static/docs/v2/dispatcher-design.htm >>>>> l >>>>> #pr >>>>> imary- >>>>> connection >>>>> >>>>> >>>>> >>>>> >>>> >>>> > > > > -- Agustin Benito Bethencourt Principal Consultant - FOSS at Codethink agustin.benito at codethink.co.uk _______________________________________________ cip-dev mailing list cip-dev at lists.cip-project.org https://lists.cip-project.org/mailman/listinfo/cip-dev ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-12-05 9:09 ` Trung. Huynh @ 2017-12-11 6:46 ` Daniel Sangorrin 2017-12-11 9:54 ` Trung. Huynh 0 siblings, 1 reply; 17+ messages in thread From: Daniel Sangorrin @ 2017-12-11 6:46 UTC (permalink / raw) To: cip-dev Hi Trung, I haven't got any message from Agustin. Could you build the binaries by yourself? Regards, Daniel > -----Original Message----- > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > Sent: Tuesday, December 05, 2017 6:09 PM > To: Daniel Sangorrin; Agustin Benito Bethencourt > Cc: Binh Thanh. Nguyen; O365-Toru Oishi; cip-dev at lists.cip-project.org > Subject: RE: [cip-dev] B at D run on Renesas board - issue > > Dear Daniel, > > Once they to become ready for download, please ping me, thank you! > > Regards, > Trung > > -----Original Message----- > From: cip-dev-bounces at lists.cip-project.org [mailto:cip-dev-bounces at lists.cip-project.org] On Behalf Of Agustin Benito Bethencourt > Sent: Friday, December 1, 2017 2:42 AM > To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> > Cc: Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi <toru.oishi.zj@renesas.com>; cip-dev at lists.cip- > project.org > Subject: Re: [cip-dev] B at D run on Renesas board - issue > > Hi, > > On 29/11/17 23:53, Daniel Sangorrin wrote: > > Hi Trung, Agustin, Robert > > > >> -----Original Message----- > >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > >> Sent: Monday, November 27, 2017 7:45 PM > >> To: Robert Marshall; Daniel Sangorrin > >> Cc: Binh Thanh. Nguyen; O365-Toru Oishi; 'Chris Paterson'; > >> cip-dev at lists.cip-project.org > >> Subject: RE: B at D run on Renesas board - issue > >> > >> Dear Daniel, Robert, > >> > >> Thank for your advices. > >> BTW, could you please give me uImage and device tree file as well as file system you have already built to use in your sample test? > >> I appreciate that. > > > > I was planning to upload them to B at D AWS S3 account, but I haven't received an account yet. > > Agustin: could you try again please? should I send you some information? > > I am travelling. Will do it Mon or Tue next week. Sorry about this delay. You should have full access to S3. > > > Robert: should I send the patches again to make sure that everyone is running the same code? > > > > Best regards, > > Daniel > > > >> -----Original Message----- > >> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > >> Sent: Friday, November 17, 2017 4:18 PM > >> To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> > >> Cc: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; Binh Thanh. Nguyen > >> <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi > >> <toru.oishi.zj@renesas.com>; 'Chris Paterson' > >> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org > >> Subject: Re: B at D run on Renesas board - issue > >> > >> Hi > >> > >> "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes: > >> > >>> Dear Trung san > >>> > >>>> -----Original Message----- > >>>> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > >>>> Sent: Thursday, November 16, 2017 5:49 PM > >>>> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen > >>>> Cc: O365-Toru Oishi; 'Chris Paterson'; > >>>> cip-dev at lists.cip-project.org > >>>> Subject: RE: B at D run on Renesas board - issue > >>>> > >>>> Dear Daniel, > >>>> > >>>> Thank for your reply. > >>>> The log in attachment is took from lava for easily observing instead of html page. > >>>> Regarding deploy section, YES, as you can see the log showing that > >>>> has passed over it already to get into test section. > >>>> > >>>> Is there anything going wrong? > >>>> Looking for your feedback > >>>> > >>> > >>> It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card. > >>> > >> > >> It would be useful to see the test yaml as it is now, but looking back in the thread the original has in the boot section: > >> > >> commands: sd > >> > >> you should change that to > >> > >> commands: ramdisk > >> > >> Robert > >> > >>> Regards, > >>> Daniel > >>> > >>>> Best Regards, > >>>> Trung > >>>> > >>>> -----Original Message----- > >>>> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] > >>>> Sent: Thursday, November 16, 2017 3:11 PM > >>>> To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall' > >>>> <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen > >>>> <binh.nguyen.uw@rvc.renesas.com> > >>>> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' > >>>> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org > >>>> Subject: RE: B at D run on Renesas board - issue > >>>> > >>>> Dear Trung san, > >>>> > >>>>> -----Original Message----- > >>>>> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > >>>>> Sent: Wednesday, November 15, 2017 7:21 PM > >>>>> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen > >>>>> Cc: O365-Toru Oishi; 'Chris Paterson'; > >>>>> cip-dev at lists.cip-project.org > >>>>> Subject: RE: B at D run on Renesas board - issue > >>>>> > >>>>> Hi Daniel, Robert, > >>>>> > >>>>> We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: > >>>>> # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our > >>>>> error log in attachment. > >>>>> I also take example log over here > >>>>> https://gitlab.com/snippets/1679749 > >>>>> to see that it can create a directory by mkdir /lava-1 > >>>>> > >>>>> Could you please tell us what does it make scene? How can we fix it? > >>>>> Thank you. > >>>> > >>>> Please could you send the complete log? > >>>> > >>>>> P/S: healthcheck script same as Binh-san attached to you before > >>>> > >>>> Did you make sure to uncomment the deploy section? > >>>> > >>>> Regards, > >>>> Daniel > >>>> > >>>>> > >>>>> Best Regards, > >>>>> Trung > >>>>> > >>>>> -----Original Message----- > >>>>> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] > >>>>> Sent: Monday, November 6, 2017 9:19 AM > >>>>> To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. > >>>>> Nguyen <binh.nguyen.uw@rvc.renesas.com> > >>>>> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' > >>>>> <Chris.Paterson2@renesas.com>; Trung. Huynh > >>>>> <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org > >>>>> Subject: RE: B at D run on Renesas board - issue > >>>>> > >>>>> Hello Binh-san, > >>>>> > >>>>>> -----Original Message----- > >>>>>> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > >>>>>> Sent: Saturday, November 04, 2017 1:05 AM > >>>>>> To: Binh Thanh. Nguyen > >>>>>> Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. > >>>>>> Huynh; cip-dev at lists.cip-project.org > >>>>>> Subject: Re: B at D run on Renesas board - issue > >>>>>> > >>>>>> "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: > >>>>>> > >>>>>>> Hello Daniel, Robert, > >>>>>>> > >>>>>>> We are facing an issue when trying to run healthcheck using B at D on Renesas board. > >>>>>>> I would like to attach the log and the healthcheck script (we > >>>>>>> modified the healthcheck from Daniel) > >>>>>>> > >>>>>>> The boot action was passed, but after that, look like LAVA > >>>>>>> cannot send command to Board, only send "#" (it supposed to be "uname"). > >>>>>>> I wonder if you met same issue before? > >>>>>>> And if possible, please give us any hints you may have for debugging this issue! > >>>>>>> > >>>>>>> Best regards, > >>>>>>> Binh Nguyen > >>>>>> > >>>>>> Thanh > >>>>>> > >>>>>> Sorry for the delay in responding! > >>>>>> > >>>>>> That test is missing a deploy section (all commented out) are you > >>>>>> trying to make the test too minimal? LAVA tends to swallow output > >>>>>> if it is what is expected. > >>>>>> > >>>>>> Robert > >>>>> > >>>>> As Robert said, please do not comment out the deploy section. LAVA > >>>>> does not just deploy the binaries as they are, it also copies some > >>>>> scripts (LAVA Test shell) into the ramdisk (or network filesystem). > >>>>> # LAVA does not use scp (or a serial protocol) to copy them into > >>>>> the target > >>>>> > >>>>> For deploying you need a PDU (remote power switch). If you don't > >>>>> have one you need to buy one and then add the corresponding commands. > >>>>> # Note: I use an IP Power 9258 remote PDU. > >>>>> # Note: do not think you can get around without a PDU* > >>>>> > >>>>> Thanks, > >>>>> Daniel > >>>>> > >>>>> *There are ways to do it but they have limitations > >>>>> https://validation.linaro.org/static/docs/v2/dispatcher-design.htm > >>>>> l > >>>>> #pr > >>>>> imary- > >>>>> connection > >>>>> > >>>>> > >>>>> > >>>>> > >>>> > >>>> > > > > > > > > > > > -- > Agustin Benito Bethencourt > Principal Consultant - FOSS at Codethink agustin.benito at codethink.co.uk > _______________________________________________ > cip-dev mailing list > cip-dev at lists.cip-project.org > https://lists.cip-project.org/mailman/listinfo/cip-dev ^ permalink raw reply [flat|nested] 17+ messages in thread
* [cip-dev] B@D run on Renesas board - issue 2017-12-11 6:46 ` Daniel Sangorrin @ 2017-12-11 9:54 ` Trung. Huynh 0 siblings, 0 replies; 17+ messages in thread From: Trung. Huynh @ 2017-12-11 9:54 UTC (permalink / raw) To: cip-dev Dear Daniel, Well, I think I got my own binaries already. But wanna say that it's thankful to have your helping, keep forward. Regards, Trung -----Original Message----- From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] Sent: Monday, December 11, 2017 1:47 PM To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Agustin Benito Bethencourt' <agustin.benito@codethink.co.uk> Cc: Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi <toru.oishi.zj@renesas.com>; cip-dev at lists.cip-project.org Subject: RE: [cip-dev] B at D run on Renesas board - issue Hi Trung, I haven't got any message from Agustin. Could you build the binaries by yourself? Regards, Daniel > -----Original Message----- > From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > Sent: Tuesday, December 05, 2017 6:09 PM > To: Daniel Sangorrin; Agustin Benito Bethencourt > Cc: Binh Thanh. Nguyen; O365-Toru Oishi; cip-dev at lists.cip-project.org > Subject: RE: [cip-dev] B at D run on Renesas board - issue > > Dear Daniel, > > Once they to become ready for download, please ping me, thank you! > > Regards, > Trung > > -----Original Message----- > From: cip-dev-bounces at lists.cip-project.org > [mailto:cip-dev-bounces at lists.cip-project.org] On Behalf Of Agustin > Benito Bethencourt > Sent: Friday, December 1, 2017 2:42 AM > To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> > Cc: Binh Thanh. Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Toru > Oishi <toru.oishi.zj@renesas.com>; cip-dev at lists.cip- project.org > Subject: Re: [cip-dev] B at D run on Renesas board - issue > > Hi, > > On 29/11/17 23:53, Daniel Sangorrin wrote: > > Hi Trung, Agustin, Robert > > > >> -----Original Message----- > >> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > >> Sent: Monday, November 27, 2017 7:45 PM > >> To: Robert Marshall; Daniel Sangorrin > >> Cc: Binh Thanh. Nguyen; O365-Toru Oishi; 'Chris Paterson'; > >> cip-dev at lists.cip-project.org > >> Subject: RE: B at D run on Renesas board - issue > >> > >> Dear Daniel, Robert, > >> > >> Thank for your advices. > >> BTW, could you please give me uImage and device tree file as well as file system you have already built to use in your sample test? > >> I appreciate that. > > > > I was planning to upload them to B at D AWS S3 account, but I haven't received an account yet. > > Agustin: could you try again please? should I send you some information? > > I am travelling. Will do it Mon or Tue next week. Sorry about this delay. You should have full access to S3. > > > Robert: should I send the patches again to make sure that everyone is running the same code? > > > > Best regards, > > Daniel > > > >> -----Original Message----- > >> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > >> Sent: Friday, November 17, 2017 4:18 PM > >> To: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> > >> Cc: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; Binh Thanh. > >> Nguyen <binh.nguyen.uw@rvc.renesas.com>; O365-Toru Oishi > >> <toru.oishi.zj@renesas.com>; 'Chris Paterson' > >> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org > >> Subject: Re: B at D run on Renesas board - issue > >> > >> Hi > >> > >> "Daniel Sangorrin" <daniel.sangorrin@toshiba.co.jp> writes: > >> > >>> Dear Trung san > >>> > >>>> -----Original Message----- > >>>> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > >>>> Sent: Thursday, November 16, 2017 5:49 PM > >>>> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen > >>>> Cc: O365-Toru Oishi; 'Chris Paterson'; > >>>> cip-dev at lists.cip-project.org > >>>> Subject: RE: B at D run on Renesas board - issue > >>>> > >>>> Dear Daniel, > >>>> > >>>> Thank for your reply. > >>>> The log in attachment is took from lava for easily observing instead of html page. > >>>> Regarding deploy section, YES, as you can see the log showing > >>>> that has passed over it already to get into test section. > >>>> > >>>> Is there anything going wrong? > >>>> Looking for your feedback > >>>> > >>> > >>> It seems that you are not booting from a ramdisk, but rather the rootfs installed on the eMMC or SD Card. > >>> > >> > >> It would be useful to see the test yaml as it is now, but looking back in the thread the original has in the boot section: > >> > >> commands: sd > >> > >> you should change that to > >> > >> commands: ramdisk > >> > >> Robert > >> > >>> Regards, > >>> Daniel > >>> > >>>> Best Regards, > >>>> Trung > >>>> > >>>> -----Original Message----- > >>>> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] > >>>> Sent: Thursday, November 16, 2017 3:11 PM > >>>> To: Trung. Huynh <trung.huynh.uw@rvc.renesas.com>; 'Robert Marshall' > >>>> <robert.marshall@codethink.co.uk>; Binh Thanh. Nguyen > >>>> <binh.nguyen.uw@rvc.renesas.com> > >>>> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' > >>>> <Chris.Paterson2@renesas.com>; cip-dev at lists.cip-project.org > >>>> Subject: RE: B at D run on Renesas board - issue > >>>> > >>>> Dear Trung san, > >>>> > >>>>> -----Original Message----- > >>>>> From: Trung. Huynh [mailto:trung.huynh.uw at rvc.renesas.com] > >>>>> Sent: Wednesday, November 15, 2017 7:21 PM > >>>>> To: Daniel Sangorrin; 'Robert Marshall'; Binh Thanh. Nguyen > >>>>> Cc: O365-Toru Oishi; 'Chris Paterson'; > >>>>> cip-dev at lists.cip-project.org > >>>>> Subject: RE: B at D run on Renesas board - issue > >>>>> > >>>>> Hi Daniel, Robert, > >>>>> > >>>>> We got into test section already, but have no idea why it attempts to execute the thing non-exist at all: > >>>>> # /lava-237/bin/lava-test-runner /lava-237/0 as you can see our > >>>>> error log in attachment. > >>>>> I also take example log over here > >>>>> https://gitlab.com/snippets/1679749 > >>>>> to see that it can create a directory by mkdir /lava-1 > >>>>> > >>>>> Could you please tell us what does it make scene? How can we fix it? > >>>>> Thank you. > >>>> > >>>> Please could you send the complete log? > >>>> > >>>>> P/S: healthcheck script same as Binh-san attached to you before > >>>> > >>>> Did you make sure to uncomment the deploy section? > >>>> > >>>> Regards, > >>>> Daniel > >>>> > >>>>> > >>>>> Best Regards, > >>>>> Trung > >>>>> > >>>>> -----Original Message----- > >>>>> From: Daniel Sangorrin [mailto:daniel.sangorrin at toshiba.co.jp] > >>>>> Sent: Monday, November 6, 2017 9:19 AM > >>>>> To: 'Robert Marshall' <robert.marshall@codethink.co.uk>; Binh Thanh. > >>>>> Nguyen <binh.nguyen.uw@rvc.renesas.com> > >>>>> Cc: O365-Toru Oishi <toru.oishi.zj@renesas.com>; 'Chris Paterson' > >>>>> <Chris.Paterson2@renesas.com>; Trung. Huynh > >>>>> <trung.huynh.uw@rvc.renesas.com>; cip-dev at lists.cip-project.org > >>>>> Subject: RE: B at D run on Renesas board - issue > >>>>> > >>>>> Hello Binh-san, > >>>>> > >>>>>> -----Original Message----- > >>>>>> From: Robert Marshall [mailto:robert.marshall at codethink.co.uk] > >>>>>> Sent: Saturday, November 04, 2017 1:05 AM > >>>>>> To: Binh Thanh. Nguyen > >>>>>> Cc: Daniel Sangorrin; O365-Toru Oishi; Chris Paterson; Trung. > >>>>>> Huynh; cip-dev at lists.cip-project.org > >>>>>> Subject: Re: B at D run on Renesas board - issue > >>>>>> > >>>>>> "Binh Thanh. Nguyen" <binh.nguyen.uw@rvc.renesas.com> writes: > >>>>>> > >>>>>>> Hello Daniel, Robert, > >>>>>>> > >>>>>>> We are facing an issue when trying to run healthcheck using B at D on Renesas board. > >>>>>>> I would like to attach the log and the healthcheck script (we > >>>>>>> modified the healthcheck from Daniel) > >>>>>>> > >>>>>>> The boot action was passed, but after that, look like LAVA > >>>>>>> cannot send command to Board, only send "#" (it supposed to be "uname"). > >>>>>>> I wonder if you met same issue before? > >>>>>>> And if possible, please give us any hints you may have for debugging this issue! > >>>>>>> > >>>>>>> Best regards, > >>>>>>> Binh Nguyen > >>>>>> > >>>>>> Thanh > >>>>>> > >>>>>> Sorry for the delay in responding! > >>>>>> > >>>>>> That test is missing a deploy section (all commented out) are > >>>>>> you trying to make the test too minimal? LAVA tends to swallow > >>>>>> output if it is what is expected. > >>>>>> > >>>>>> Robert > >>>>> > >>>>> As Robert said, please do not comment out the deploy section. > >>>>> LAVA does not just deploy the binaries as they are, it also > >>>>> copies some scripts (LAVA Test shell) into the ramdisk (or network filesystem). > >>>>> # LAVA does not use scp (or a serial protocol) to copy them into > >>>>> the target > >>>>> > >>>>> For deploying you need a PDU (remote power switch). If you don't > >>>>> have one you need to buy one and then add the corresponding commands. > >>>>> # Note: I use an IP Power 9258 remote PDU. > >>>>> # Note: do not think you can get around without a PDU* > >>>>> > >>>>> Thanks, > >>>>> Daniel > >>>>> > >>>>> *There are ways to do it but they have limitations > >>>>> https://validation.linaro.org/static/docs/v2/dispatcher-design.h > >>>>> tm > >>>>> l > >>>>> #pr > >>>>> imary- > >>>>> connection > >>>>> > >>>>> > >>>>> > >>>>> > >>>> > >>>> > > > > > > > > > > > -- > Agustin Benito Bethencourt > Principal Consultant - FOSS at Codethink > agustin.benito at codethink.co.uk > _______________________________________________ > cip-dev mailing list > cip-dev at lists.cip-project.org > https://lists.cip-project.org/mailman/listinfo/cip-dev ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2017-12-11 9:54 UTC | newest] Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-11-02 10:05 [cip-dev] B@D run on Renesas board - issue Binh Thanh. Nguyen 2017-11-03 16:04 ` Robert Marshall 2017-11-06 2:18 ` Daniel Sangorrin 2017-11-08 7:26 ` Binh Thanh. Nguyen 2017-11-15 10:21 ` Trung. Huynh 2017-11-15 13:59 ` Robert Marshall 2017-11-16 8:11 ` Daniel Sangorrin 2017-11-16 8:48 ` Trung. Huynh 2017-11-16 8:54 ` Daniel Sangorrin 2017-11-17 9:18 ` Robert Marshall 2017-11-27 10:45 ` Trung. Huynh 2017-11-30 7:53 ` Daniel Sangorrin 2017-11-30 9:09 ` Robert Marshall 2017-11-30 19:42 ` Agustin Benito Bethencourt 2017-12-05 9:09 ` Trung. Huynh 2017-12-11 6:46 ` Daniel Sangorrin 2017-12-11 9:54 ` Trung. Huynh
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.