All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] wlcore: disable multicast filter in AP mode
@ 2017-01-30 14:49 Iain Hunter
  2017-01-31  7:22 ` Kalle Valo
  0 siblings, 1 reply; 5+ messages in thread
From: Iain Hunter @ 2017-01-30 14:49 UTC (permalink / raw)
  To: linux-wireless; +Cc: kvalo, Iain Hunter

Enable AP support allmulticast for MDNS. It can be enabled by bringing up 

the interface with ip command with the argument allmulticast on

Signed-off-by: Iain Hunter <i-hunter1@ti.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 3241e9eba73..1ab0561ab13 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3281,6 +3281,20 @@ static void wl1271_op_configure_filter(struct ieee80211_hw *hw,
 			if (ret < 0)
 				goto out_sleep;
 		}
+
+        /*
+         * If interface in AP mode and created with allmulticast then disable
+         * the firmware filters so that all multicast packets are passed
+         * This is mandatory for MDNS based discovery protocols 
+         */
+ 		if (wlvif->bss_type == BSS_TYPE_AP_BSS) {
+ 			if (*total & FIF_ALLMULTI)
+				ret = wl1271_acx_group_address_tbl(wl, wlvif,
+								   false,
+								   NULL, 0);
+              
+                }
+
 	}
 
 	/*
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH] wlcore: disable multicast filter in AP mode
  2017-01-30 14:49 [PATCH] wlcore: disable multicast filter in AP mode Iain Hunter
@ 2017-01-31  7:22 ` Kalle Valo
  0 siblings, 0 replies; 5+ messages in thread
From: Kalle Valo @ 2017-01-31  7:22 UTC (permalink / raw)
  To: Iain Hunter; +Cc: linux-wireless, Iain Hunter

Iain Hunter <drhunter95@gmail.com> writes:

> Enable AP support allmulticast for MDNS. It can be enabled by bringing up 
>
> the interface with ip command with the argument allmulticast on
>
> Signed-off-by: Iain Hunter <i-hunter1@ti.com>

The commit log looks now ok, except there's an unnecessare empty line.
But I can fix that.

> @@ -3281,6 +3281,20 @@ static void wl1271_op_configure_filter(struct ieee80211_hw *hw,
>  			if (ret < 0)
>  				goto out_sleep;
>  		}
> +
> +        /*
> +         * If interface in AP mode and created with allmulticast then disable
> +         * the firmware filters so that all multicast packets are passed
> +         * This is mandatory for MDNS based discovery protocols 
> +         */
> + 		if (wlvif->bss_type == BSS_TYPE_AP_BSS) {
> + 			if (*total & FIF_ALLMULTI)
> +				ret = wl1271_acx_group_address_tbl(wl, wlvif,
> +								   false,
> +								   NULL, 0);
> +              
> +                }
> +
>  	}

Sorry, I missed this earlier but here you don't check ret value at all.
I think you should bail out from the look if an error happens, like
other commands in the same loop does.

-- 
Kalle Valo

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH] wlcore: disable multicast filter in AP mode
@ 2017-01-31 11:31 Iain Hunter
  0 siblings, 0 replies; 5+ messages in thread
From: Iain Hunter @ 2017-01-31 11:31 UTC (permalink / raw)
  To: linux-wireless; +Cc: kvalo, Iain Hunter

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 3241e9eba73..7d3f15d5d5c 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3281,6 +3281,21 @@ static void wl1271_op_configure_filter(struct ieee80211_hw *hw,
 			if (ret < 0)
 				goto out_sleep;
 		}
+
+        /*
+         * If interface in AP mode and created with allmulticast then disable
+         * the firmware filters so that all multicast packets are passed
+         * This is mandatory for MDNS based discovery protocols 
+         */
+ 		if (wlvif->bss_type == BSS_TYPE_AP_BSS) {
+ 			if (*total & FIF_ALLMULTI) {
+				ret = wl1271_acx_group_address_tbl(wl, wlvif,
+							false,
+							NULL, 0);
+				if (ret < 0)
+					goto out_sleep;
+				}
+		}
 	}
 
 	/*
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH] wlcore: disable multicast filter in AP mode
@ 2017-01-31 11:26 Iain Hunter
  0 siblings, 0 replies; 5+ messages in thread
From: Iain Hunter @ 2017-01-31 11:26 UTC (permalink / raw)
  To: linux-wireless; +Cc: kvalo, Iain Hunter

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 3241e9eba73..7d3f15d5d5c 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3281,6 +3281,21 @@ static void wl1271_op_configure_filter(struct ieee80211_hw *hw,
 			if (ret < 0)
 				goto out_sleep;
 		}
+
+        /*
+         * If interface in AP mode and created with allmulticast then disable
+         * the firmware filters so that all multicast packets are passed
+         * This is mandatory for MDNS based discovery protocols 
+         */
+ 		if (wlvif->bss_type == BSS_TYPE_AP_BSS) {
+ 			if (*total & FIF_ALLMULTI) {
+				ret = wl1271_acx_group_address_tbl(wl, wlvif,
+							false,
+							NULL, 0);
+				if (ret < 0)
+					goto out_sleep;
+				}
+		}
 	}
 
 	/*
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH] wlcore: disable multicast filter in AP mode
@ 2017-01-31 10:48 Iain Hunter
  0 siblings, 0 replies; 5+ messages in thread
From: Iain Hunter @ 2017-01-31 10:48 UTC (permalink / raw)
  To: linux-wireless; +Cc: kvalo, Iain Hunter

Enable AP support for allmulticast for MDNS It can be enabled by bringing

up the interface with ip command with argument allmulticast on  
Signed-off-by: Iain Hunter <i-hunter1@ti.com>
---
PATCH v2: resumbitting to handle error return value
 drivers/net/wireless/ti/wlcore/main.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 3241e9eba73..4fabbb486e7 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3281,6 +3281,21 @@ static void wl1271_op_configure_filter(struct ieee80211_hw *hw,
 			if (ret < 0)
 				goto out_sleep;
 		}
+
+        /*
+         * If interface in AP mode and created with allmulticast then disable
+         * the firmware filters so that all multicast packets are passed
+         * This is mandatory for MDNS based discovery protocols 
+         */
+ 		if (wlvif->bss_type == BSS_TYPE_AP_BSS) {
+ 			if (*total & FIF_ALLMULTI) {
+				ret = wl1271_acx_group_address_tbl(wl, wlvif,
+								   false,
+								   NULL, 0);
+			    if (ret < 0)
+				   goto out_sleep;
+                }
+           }
 	}
 
 	/*
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2017-01-31 11:32 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-30 14:49 [PATCH] wlcore: disable multicast filter in AP mode Iain Hunter
2017-01-31  7:22 ` Kalle Valo
2017-01-31 10:48 Iain Hunter
2017-01-31 11:26 Iain Hunter
2017-01-31 11:31 Iain Hunter

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.