* [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full
@ 2014-02-28 2:29 Hu Tao
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 1/4] qapi: introduce PreallocMode and a new PreallocMode full Hu Tao
` (4 more replies)
0 siblings, 5 replies; 10+ messages in thread
From: Hu Tao @ 2014-02-28 2:29 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, Fam Zheng, Peter Lieven, Stefan Hajnoczi
This series implements full image preallocation to create a non-sparse image
file at creation time, both for raw and qcow2 format. The purpose is to avoid
performance deterioration of the guest cause by sparse image.
v6:
- add `Since 2.0' to PreallocMode
- apply total_size change to raw-win32.c as well
Hu Tao (4):
qapi: introduce PreallocMode and a new PreallocMode full.
raw, qcow2: don't convert file size to sector size
raw-posix: Add full image preallocation option
qcow2: Add full image preallocation option
block/qcow2.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++++-------
block/raw-posix.c | 45 +++++++++++++++++++++------
block/raw-win32.c | 4 +--
qapi-schema.json | 14 +++++++++
4 files changed, 132 insertions(+), 22 deletions(-)
--
1.8.0
^ permalink raw reply [flat|nested] 10+ messages in thread
* [Qemu-devel] [PATCH v6 1/4] qapi: introduce PreallocMode and a new PreallocMode full.
2014-02-28 2:29 [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full Hu Tao
@ 2014-02-28 2:29 ` Hu Tao
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 2/4] raw, qcow2: don't convert file size to sector size Hu Tao
` (3 subsequent siblings)
4 siblings, 0 replies; 10+ messages in thread
From: Hu Tao @ 2014-02-28 2:29 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, Fam Zheng, Peter Lieven, Stefan Hajnoczi
This patch prepares for the subsequent patches.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
---
block/qcow2.c | 8 ++++----
qapi-schema.json | 14 ++++++++++++++
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/block/qcow2.c b/block/qcow2.c
index 0b4335c..d54d289 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1454,7 +1454,7 @@ static int preallocate(BlockDriverState *bs)
static int qcow2_create2(const char *filename, int64_t total_size,
const char *backing_file, const char *backing_format,
- int flags, size_t cluster_size, int prealloc,
+ int flags, size_t cluster_size, PreallocMode prealloc,
QEMUOptionParameter *options, int version,
Error **errp)
{
@@ -1624,7 +1624,7 @@ static int qcow2_create(const char *filename, QEMUOptionParameter *options,
uint64_t sectors = 0;
int flags = 0;
size_t cluster_size = DEFAULT_CLUSTER_SIZE;
- int prealloc = 0;
+ PreallocMode prealloc = PREALLOC_MODE_OFF;
int version = 3;
Error *local_err = NULL;
int ret;
@@ -1645,9 +1645,9 @@ static int qcow2_create(const char *filename, QEMUOptionParameter *options,
}
} else if (!strcmp(options->name, BLOCK_OPT_PREALLOC)) {
if (!options->value.s || !strcmp(options->value.s, "off")) {
- prealloc = 0;
+ prealloc = PREALLOC_MODE_OFF;
} else if (!strcmp(options->value.s, "metadata")) {
- prealloc = 1;
+ prealloc = PREALLOC_MODE_METADATA;
} else {
error_setg(errp, "Invalid preallocation mode: '%s'",
options->value.s);
diff --git a/qapi-schema.json b/qapi-schema.json
index 7cfb5e5..540d396 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -4420,3 +4420,17 @@
# Since: 1.7
##
{ 'command': 'blockdev-add', 'data': { 'options': 'BlockdevOptions' } }
+
+##
+# @PreallocMode
+#
+# Preallocation mode of QEMU image file
+#
+# @off: no preallocation
+# @metadata: preallocate only for metadata
+# @full: preallocate all data, including metadata
+#
+# Since 2.0
+##
+{ 'enum': 'PreallocMode',
+ 'data': [ 'off', 'metadata', 'full' ] }
--
1.8.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Qemu-devel] [PATCH v6 2/4] raw, qcow2: don't convert file size to sector size
2014-02-28 2:29 [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full Hu Tao
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 1/4] qapi: introduce PreallocMode and a new PreallocMode full Hu Tao
@ 2014-02-28 2:29 ` Hu Tao
2014-02-28 11:10 ` [Qemu-devel] qemu-img cannot convert 280G VHD file to qcow2 rightly redtone
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 3/4] raw-posix: Add full image preallocation option Hu Tao
` (2 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Hu Tao @ 2014-02-28 2:29 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, Fam Zheng, Peter Lieven, Stefan Hajnoczi
and avoid converting it back later.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
---
block/qcow2.c | 8 ++++----
block/raw-posix.c | 4 ++--
block/raw-win32.c | 4 ++--
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/block/qcow2.c b/block/qcow2.c
index d54d289..59c01f7 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1571,7 +1571,7 @@ static int qcow2_create2(const char *filename, int64_t total_size,
}
/* Okay, now that we have a valid image, let's give it the right size */
- ret = bdrv_truncate(bs, total_size * BDRV_SECTOR_SIZE);
+ ret = bdrv_truncate(bs, total_size);
if (ret < 0) {
error_setg_errno(errp, -ret, "Could not resize image");
goto out;
@@ -1621,7 +1621,7 @@ static int qcow2_create(const char *filename, QEMUOptionParameter *options,
{
const char *backing_file = NULL;
const char *backing_fmt = NULL;
- uint64_t sectors = 0;
+ uint64_t size = 0;
int flags = 0;
size_t cluster_size = DEFAULT_CLUSTER_SIZE;
PreallocMode prealloc = PREALLOC_MODE_OFF;
@@ -1632,7 +1632,7 @@ static int qcow2_create(const char *filename, QEMUOptionParameter *options,
/* Read out options */
while (options && options->name) {
if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
- sectors = options->value.n / 512;
+ size = options->value.n & BDRV_SECTOR_MASK;
} else if (!strcmp(options->name, BLOCK_OPT_BACKING_FILE)) {
backing_file = options->value.s;
} else if (!strcmp(options->name, BLOCK_OPT_BACKING_FMT)) {
@@ -1683,7 +1683,7 @@ static int qcow2_create(const char *filename, QEMUOptionParameter *options,
return -EINVAL;
}
- ret = qcow2_create2(filename, sectors, backing_file, backing_fmt, flags,
+ ret = qcow2_create2(filename, size, backing_file, backing_fmt, flags,
cluster_size, prealloc, options, version, &local_err);
if (error_is_set(&local_err)) {
error_propagate(errp, local_err);
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 126a634..01fb41a 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -1233,7 +1233,7 @@ static int raw_create(const char *filename, QEMUOptionParameter *options,
/* Read out options */
while (options && options->name) {
if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
- total_size = options->value.n / BDRV_SECTOR_SIZE;
+ total_size = options->value.n & BDRV_SECTOR_MASK;
}
options++;
}
@@ -1244,7 +1244,7 @@ static int raw_create(const char *filename, QEMUOptionParameter *options,
result = -errno;
error_setg_errno(errp, -result, "Could not create file");
} else {
- if (ftruncate(fd, total_size * BDRV_SECTOR_SIZE) != 0) {
+ if (ftruncate(fd, total_size) != 0) {
result = -errno;
error_setg_errno(errp, -result, "Could not resize file");
}
diff --git a/block/raw-win32.c b/block/raw-win32.c
index beb7f23..35d1207 100644
--- a/block/raw-win32.c
+++ b/block/raw-win32.c
@@ -473,7 +473,7 @@ static int raw_create(const char *filename, QEMUOptionParameter *options,
/* Read out options */
while (options && options->name) {
if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
- total_size = options->value.n / 512;
+ total_size = options->value.n & BDRV_SECTOR_MASK;
}
options++;
}
@@ -485,7 +485,7 @@ static int raw_create(const char *filename, QEMUOptionParameter *options,
return -EIO;
}
set_sparse(fd);
- ftruncate(fd, total_size * 512);
+ ftruncate(fd, total_size);
qemu_close(fd);
return 0;
}
--
1.8.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Qemu-devel] [PATCH v6 3/4] raw-posix: Add full image preallocation option
2014-02-28 2:29 [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full Hu Tao
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 1/4] qapi: introduce PreallocMode and a new PreallocMode full Hu Tao
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 2/4] raw, qcow2: don't convert file size to sector size Hu Tao
@ 2014-02-28 2:29 ` Hu Tao
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 4/4] qcow2: " Hu Tao
2014-03-03 15:00 ` [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full Stefan Hajnoczi
4 siblings, 0 replies; 10+ messages in thread
From: Hu Tao @ 2014-02-28 2:29 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, Fam Zheng, Peter Lieven, Stefan Hajnoczi
This patch adds a new option preallocation for raw format, and implements
full preallocation.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
---
block/raw-posix.c | 43 +++++++++++++++++++++++++++++++++++--------
1 file changed, 35 insertions(+), 8 deletions(-)
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 01fb41a..1961b74 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -1229,11 +1229,22 @@ static int raw_create(const char *filename, QEMUOptionParameter *options,
int fd;
int result = 0;
int64_t total_size = 0;
+ PreallocMode prealloc = PREALLOC_MODE_OFF;
/* Read out options */
while (options && options->name) {
if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
total_size = options->value.n & BDRV_SECTOR_MASK;
+ } else if (!strcmp(options->name, BLOCK_OPT_PREALLOC)) {
+ if (!options->value.s || !strcmp(options->value.s, "off")) {
+ prealloc = PREALLOC_MODE_OFF;
+ } else if (!strcmp(options->value.s, "full")) {
+ prealloc = PREALLOC_MODE_FULL;
+ } else {
+ error_setg(errp, "Invalid preallocation mode: '%s'",
+ options->value.s);
+ return -EINVAL;
+ }
}
options++;
}
@@ -1243,16 +1254,27 @@ static int raw_create(const char *filename, QEMUOptionParameter *options,
if (fd < 0) {
result = -errno;
error_setg_errno(errp, -result, "Could not create file");
- } else {
- if (ftruncate(fd, total_size) != 0) {
- result = -errno;
- error_setg_errno(errp, -result, "Could not resize file");
- }
- if (qemu_close(fd) != 0) {
- result = -errno;
- error_setg_errno(errp, -result, "Could not close the new file");
+ goto out;
+ }
+ if (ftruncate(fd, total_size) != 0) {
+ result = -errno;
+ error_setg_errno(errp, -result, "Could not resize file");
+ goto out_close;
+ }
+ if (prealloc == PREALLOC_MODE_FULL) {
+ /* posix_fallocate() doesn't set errno. */
+ result = -posix_fallocate(fd, 0, total_size);
+ if (result != 0) {
+ error_setg_errno(errp, -result,
+ "Could not preallocate data for the new file");
}
}
+out_close:
+ if (qemu_close(fd) != 0) {
+ result = -errno;
+ error_setg_errno(errp, -result, "Could not close the new file");
+ }
+out:
return result;
}
@@ -1403,6 +1425,11 @@ static QEMUOptionParameter raw_create_options[] = {
.type = OPT_SIZE,
.help = "Virtual disk size"
},
+ {
+ .name = BLOCK_OPT_PREALLOC,
+ .type = OPT_STRING,
+ .help = "Preallocation mode (allowed values: off, full)"
+ },
{ NULL }
};
--
1.8.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Qemu-devel] [PATCH v6 4/4] qcow2: Add full image preallocation option
2014-02-28 2:29 [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full Hu Tao
` (2 preceding siblings ...)
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 3/4] raw-posix: Add full image preallocation option Hu Tao
@ 2014-02-28 2:29 ` Hu Tao
2014-03-03 15:00 ` [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full Stefan Hajnoczi
4 siblings, 0 replies; 10+ messages in thread
From: Hu Tao @ 2014-02-28 2:29 UTC (permalink / raw)
To: qemu-devel; +Cc: Kevin Wolf, Fam Zheng, Peter Lieven, Stefan Hajnoczi
This adds a preallocation=full mode to qcow2 image creation, which
creates a non-sparse image file.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
---
block/qcow2.c | 75 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 72 insertions(+), 3 deletions(-)
diff --git a/block/qcow2.c b/block/qcow2.c
index 59c01f7..2aa6efa 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -1458,6 +1458,7 @@ static int qcow2_create2(const char *filename, int64_t total_size,
QEMUOptionParameter *options, int version,
Error **errp)
{
+ QEMUOptionParameter *alloc_options = NULL;
/* Calculate cluster_bits */
int cluster_bits;
cluster_bits = ffs(cluster_size) - 1;
@@ -1487,16 +1488,80 @@ static int qcow2_create2(const char *filename, int64_t total_size,
Error *local_err = NULL;
int ret;
+ if (prealloc == PREALLOC_MODE_FULL) {
+ int64_t meta_size = 0;
+ unsigned nreftablee, nrefblocke, nl1e, nl2e;
+ BlockDriver *drv;
+
+ total_size = align_offset(total_size, cluster_size);
+
+ drv = bdrv_find_protocol(filename, true);
+ if (drv == NULL) {
+ error_setg(errp, "Could not find protocol for file '%s'", filename);
+ return -ENOENT;
+ }
+
+ alloc_options = append_option_parameters(alloc_options,
+ drv->create_options);
+ alloc_options = append_option_parameters(alloc_options, options);
+
+ /* header: 1 cluster */
+ meta_size += cluster_size;
+
+ /* total size of L2 tables */
+ nl2e = total_size / cluster_size;
+ nl2e = align_offset(nl2e, cluster_size / sizeof(uint64_t));
+ meta_size += nl2e * sizeof(uint64_t);
+
+ /* total size of L1 tables */
+ nl1e = nl2e * sizeof(uint64_t) / cluster_size;
+ nl1e = align_offset(nl1e, cluster_size / sizeof(uint64_t));
+ meta_size += nl1e * sizeof(uint64_t);
+
+ /* total size of refcount blocks
+ *
+ * note: every host cluster is reference-counted, including metadata
+ * (even refcount blocks are recursively included).
+ * Let:
+ * a = total_size (this is the guest disk size)
+ * m = meta size not including refcount blocks and refcount tables
+ * c = cluster size
+ * y1 = number of refcount blocks entries
+ * y2 = meta size including everything
+ * then,
+ * y1 = (y2 + a)/c
+ * y2 = y1 * sizeof(u16) + y1 * sizeof(u16) * sizeof(u64) / c + m
+ * we can get y1:
+ * y1 = (a + m) / (c - sizeof(u16) - sizeof(u16) * sizeof(u64) / c)
+ */
+ nrefblocke = (total_size + meta_size + cluster_size) /
+ (cluster_size - sizeof(uint16_t) -
+ 1.0 * sizeof(uint16_t) * sizeof(uint64_t) / cluster_size);
+ nrefblocke = align_offset(nrefblocke, cluster_size / sizeof(uint16_t));
+ meta_size += nrefblocke * sizeof(uint16_t);
+
+ /* total size of refcount tables */
+ nreftablee = nrefblocke * sizeof(uint16_t) / cluster_size;
+ nreftablee = align_offset(nreftablee, cluster_size / sizeof(uint64_t));
+ meta_size += nreftablee * sizeof(uint64_t);
+
+ set_option_parameter_int(alloc_options, BLOCK_OPT_SIZE,
+ total_size + meta_size);
+ set_option_parameter(alloc_options, BLOCK_OPT_PREALLOC, "full");
+
+ options = alloc_options;
+ }
+
ret = bdrv_create_file(filename, options, &local_err);
if (ret < 0) {
error_propagate(errp, local_err);
- return ret;
+ goto out_options;
}
ret = bdrv_file_open(&bs, filename, NULL, NULL, BDRV_O_RDWR, &local_err);
if (ret < 0) {
error_propagate(errp, local_err);
- return ret;
+ goto out_options;
}
/* Write the header */
@@ -1613,6 +1678,8 @@ static int qcow2_create2(const char *filename, int64_t total_size,
ret = 0;
out:
bdrv_unref(bs);
+out_options:
+ free_option_parameters(alloc_options);
return ret;
}
@@ -1648,6 +1715,8 @@ static int qcow2_create(const char *filename, QEMUOptionParameter *options,
prealloc = PREALLOC_MODE_OFF;
} else if (!strcmp(options->value.s, "metadata")) {
prealloc = PREALLOC_MODE_METADATA;
+ } else if (!strcmp(options->value.s, "full")) {
+ prealloc = PREALLOC_MODE_FULL;
} else {
error_setg(errp, "Invalid preallocation mode: '%s'",
options->value.s);
@@ -2213,7 +2282,7 @@ static QEMUOptionParameter qcow2_create_options[] = {
{
.name = BLOCK_OPT_PREALLOC,
.type = OPT_STRING,
- .help = "Preallocation mode (allowed values: off, metadata)"
+ .help = "Preallocation mode (allowed values: off, metadata, full)"
},
{
.name = BLOCK_OPT_LAZY_REFCOUNTS,
--
1.8.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Qemu-devel] qemu-img cannot convert 280G VHD file to qcow2 rightly
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 2/4] raw, qcow2: don't convert file size to sector size Hu Tao
@ 2014-02-28 11:10 ` redtone
2014-03-03 14:58 ` Stefan Hajnoczi
0 siblings, 1 reply; 10+ messages in thread
From: redtone @ 2014-02-28 11:10 UTC (permalink / raw)
To: qemu-devel
Vhd file uslinux01-1.vhd is uploaded to KVM node, the original VHD's size is
290G
But when I convert to QCOW2, I find the disk size is 127G, and then I also
found the uslinux01-1.vhd disk size is 127G by qemu-img info.
Qemu version is 1.7.0 stable
[root@raknode01 disk01]# qemu-img convert -f vpc uslinux01-2.vhd -O qcow2
kvm570_data
[root@raknode01 disk01]# qemu-img info kvm570_os
image: kvm570_os
file format: qcow2
virtual size: 10.0G (10737377280 bytes)
disk size: 3.9G
cluster_size: 65536
Format specific information:
compat: 1.1
lazy refcounts: false
[root@raknode01 disk01]# qemu-img info kvm570_data
image: kvm570_data
file format: qcow2
virtual size: 127G (136899993600 bytes)
disk size: 113M
cluster_size: 65536
Format specific information:
compat: 1.1
lazy refcounts: false
[root@raknode01 disk01]# qemu-img info uslinux01-2.vhd
image: uslinux01-2.vhd
file format: vpc
virtual size: 127G (136899993600 bytes)
disk size: 5.0G
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] qemu-img cannot convert 280G VHD file to qcow2 rightly
2014-02-28 11:10 ` [Qemu-devel] qemu-img cannot convert 280G VHD file to qcow2 rightly redtone
@ 2014-03-03 14:58 ` Stefan Hajnoczi
0 siblings, 0 replies; 10+ messages in thread
From: Stefan Hajnoczi @ 2014-03-03 14:58 UTC (permalink / raw)
To: redtone; +Cc: qemu-devel
On Fri, Feb 28, 2014 at 07:10:18PM +0800, redtone wrote:
> Vhd file uslinux01-1.vhd is uploaded to KVM node, the original VHD's size is
> 290G
> But when I convert to QCOW2, I find the disk size is 127G, and then I also
> found the uslinux01-1.vhd disk size is 127G by qemu-img info.
>
> Qemu version is 1.7.0 stable
This bug report is unrelated to this patch series. In the future,
please start new email threads for unrelated discussions.
> [root@raknode01 disk01]# qemu-img convert -f vpc uslinux01-2.vhd -O qcow2
> kvm570_data
[...]
> [root@raknode01 disk01]# qemu-img info kvm570_data
> image: kvm570_data
> file format: qcow2
> virtual size: 127G (136899993600 bytes)
> disk size: 113M
> cluster_size: 65536
> Format specific information:
> compat: 1.1
> lazy refcounts: false
> [root@raknode01 disk01]# qemu-img info uslinux01-2.vhd
> image: uslinux01-2.vhd
> file format: vpc
> virtual size: 127G (136899993600 bytes)
> disk size: 5.0G
This output doesn't show anything unexpected. You converted a VHD file
to qcow2. The guest sees a 127 GB virtual disk for both the VHD and the
qcow2 file.
You didn't show the part where the VHD is 290 GB.
Can you post step-by-step instructions for reproducing the problem?
Thanks,
Stefan
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full
2014-02-28 2:29 [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full Hu Tao
` (3 preceding siblings ...)
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 4/4] qcow2: " Hu Tao
@ 2014-03-03 15:00 ` Stefan Hajnoczi
2014-03-04 7:31 ` Hu Tao
4 siblings, 1 reply; 10+ messages in thread
From: Stefan Hajnoczi @ 2014-03-03 15:00 UTC (permalink / raw)
To: Hu Tao; +Cc: Kevin Wolf, Peter Lieven, Fam Zheng, qemu-devel, Stefan Hajnoczi
On Fri, Feb 28, 2014 at 10:29:29AM +0800, Hu Tao wrote:
> This series implements full image preallocation to create a non-sparse image
> file at creation time, both for raw and qcow2 format. The purpose is to avoid
> performance deterioration of the guest cause by sparse image.
>
> v6:
> - add `Since 2.0' to PreallocMode
> - apply total_size change to raw-win32.c as well
>
> Hu Tao (4):
> qapi: introduce PreallocMode and a new PreallocMode full.
> raw, qcow2: don't convert file size to sector size
> raw-posix: Add full image preallocation option
> qcow2: Add full image preallocation option
>
> block/qcow2.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++++-------
> block/raw-posix.c | 45 +++++++++++++++++++++------
> block/raw-win32.c | 4 +--
> qapi-schema.json | 14 +++++++++
> 4 files changed, 132 insertions(+), 22 deletions(-)
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full
2014-03-03 15:00 ` [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full Stefan Hajnoczi
@ 2014-03-04 7:31 ` Hu Tao
2014-03-04 8:19 ` Stefan Hajnoczi
0 siblings, 1 reply; 10+ messages in thread
From: Hu Tao @ 2014-03-04 7:31 UTC (permalink / raw)
To: Stefan Hajnoczi
Cc: Kevin Wolf, Peter Lieven, Fam Zheng, qemu-devel, Stefan Hajnoczi
On Mon, Mar 03, 2014 at 04:00:37PM +0100, Stefan Hajnoczi wrote:
> On Fri, Feb 28, 2014 at 10:29:29AM +0800, Hu Tao wrote:
> > This series implements full image preallocation to create a non-sparse image
> > file at creation time, both for raw and qcow2 format. The purpose is to avoid
> > performance deterioration of the guest cause by sparse image.
> >
> > v6:
> > - add `Since 2.0' to PreallocMode
> > - apply total_size change to raw-win32.c as well
> >
> > Hu Tao (4):
> > qapi: introduce PreallocMode and a new PreallocMode full.
> > raw, qcow2: don't convert file size to sector size
> > raw-posix: Add full image preallocation option
> > qcow2: Add full image preallocation option
> >
> > block/qcow2.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++++-------
> > block/raw-posix.c | 45 +++++++++++++++++++++------
> > block/raw-win32.c | 4 +--
> > qapi-schema.json | 14 +++++++++
> > 4 files changed, 132 insertions(+), 22 deletions(-)
>
> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan, Kevin,
Is this series in time for 2.0?
Hu
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full
2014-03-04 7:31 ` Hu Tao
@ 2014-03-04 8:19 ` Stefan Hajnoczi
0 siblings, 0 replies; 10+ messages in thread
From: Stefan Hajnoczi @ 2014-03-04 8:19 UTC (permalink / raw)
To: Hu Tao; +Cc: Kevin Wolf, Stefan Hajnoczi, Fam Zheng, qemu-devel, Peter Lieven
On Tue, Mar 04, 2014 at 03:31:31PM +0800, Hu Tao wrote:
> On Mon, Mar 03, 2014 at 04:00:37PM +0100, Stefan Hajnoczi wrote:
> > On Fri, Feb 28, 2014 at 10:29:29AM +0800, Hu Tao wrote:
> > > This series implements full image preallocation to create a non-sparse image
> > > file at creation time, both for raw and qcow2 format. The purpose is to avoid
> > > performance deterioration of the guest cause by sparse image.
> > >
> > > v6:
> > > - add `Since 2.0' to PreallocMode
> > > - apply total_size change to raw-win32.c as well
> > >
> > > Hu Tao (4):
> > > qapi: introduce PreallocMode and a new PreallocMode full.
> > > raw, qcow2: don't convert file size to sector size
> > > raw-posix: Add full image preallocation option
> > > qcow2: Add full image preallocation option
> > >
> > > block/qcow2.c | 91 ++++++++++++++++++++++++++++++++++++++++++++++++-------
> > > block/raw-posix.c | 45 +++++++++++++++++++++------
> > > block/raw-win32.c | 4 +--
> > > qapi-schema.json | 14 +++++++++
> > > 4 files changed, 132 insertions(+), 22 deletions(-)
> >
> > Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
>
> Stefan, Kevin,
>
> Is this series in time for 2.0?
Yes, it was on the mailing list before soft freeze so it is a candidate
for 2.0. In some cases maintainers may decide to hold back if they feel
a patch series imposes a high risk of breaking things - but I think this
series should be okay.
Stefan
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2014-03-04 8:20 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-28 2:29 [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full Hu Tao
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 1/4] qapi: introduce PreallocMode and a new PreallocMode full Hu Tao
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 2/4] raw, qcow2: don't convert file size to sector size Hu Tao
2014-02-28 11:10 ` [Qemu-devel] qemu-img cannot convert 280G VHD file to qcow2 rightly redtone
2014-03-03 14:58 ` Stefan Hajnoczi
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 3/4] raw-posix: Add full image preallocation option Hu Tao
2014-02-28 2:29 ` [Qemu-devel] [PATCH v6 4/4] qcow2: " Hu Tao
2014-03-03 15:00 ` [Qemu-devel] [PATCH v6 0/4] qemu-img: add preallocation=full Stefan Hajnoczi
2014-03-04 7:31 ` Hu Tao
2014-03-04 8:19 ` Stefan Hajnoczi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.