* [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
@ 2018-10-06 13:57 Bhanusree Pola
2018-10-06 14:07 ` [Outreachy Kernel][PATCH v4] " Bhanusree
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: Bhanusree Pola @ 2018-10-06 13:57 UTC (permalink / raw)
To: outreachy-kernel; +Cc: gregkh
Adjust all lines exceeding 75 chars per line to fix checkpatch warning.
Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
---
changes in v4:
-Remove Whitespace in comment section of module_comedi_pci_driver()
to fix checkpatch Error.
changes in v3:
-Comment section of module_pci_driver() exceeds 75 characters.
Adjust the chars to 75 per line
-Modified log message.
-Added change log.
changes in v2:
-comedi_pci_auto_config() function prototype is exceeds
75 characters per line. Adjust to 75 chars to improve
readability and also adjust the arguments to match open
parantheses.
-Comment section of module_comedi_pci_driver() exceeds 75
characters. Modified contents to adjust 75 chars per line.
drivers/staging/comedi/comedi_pci.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/comedi/comedi_pci.h b/drivers/staging/comedi/comedi_pci.h
index 1cc5436cb415..7291d3c0b7dc 100644
--- a/drivers/staging/comedi/comedi_pci.h
+++ b/drivers/staging/comedi/comedi_pci.h
@@ -42,7 +42,7 @@ void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
struct pci_driver *pci_driver);
/**
- * module_comedi_pci_driver()-Helper macro for registering a comedi PCI
+ * module_comedi_pci_driver()-Helper macro for registering a comedi PCI
* driver
* @__comedi_driver: comedi_driver struct
* @__pci_driver: pci_driver struct
--
2.17.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [Outreachy Kernel][PATCH v4] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
2018-10-06 13:57 [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line Bhanusree Pola
@ 2018-10-06 14:07 ` Bhanusree
2018-10-06 17:55 ` [Outreachy kernel] [Outreachy Kernel][PATCH v3] " Himanshu Jha
2018-10-06 17:59 ` Himanshu Jha
2 siblings, 0 replies; 13+ messages in thread
From: Bhanusree @ 2018-10-06 14:07 UTC (permalink / raw)
To: outreachy-kernel; +Cc: Ian Abbott, H Hartley Sweeten, Greg Kroah-Hartman
On Saturday 06 October 2018 07:27 PM, Bhanusree Pola wrote:
> Adjust all lines exceeding 75 chars per line to fix checkpatch warning.
>
> Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
> ---
> changes in v4:
> -Remove Whitespace in comment section of module_comedi_pci_driver()
> to fix checkpatch Error.
>
> changes in v3:
> -Comment section of module_pci_driver() exceeds 75 characters.
> Adjust the chars to 75 per line
> -Modified log message.
> -Added change log.
>
> changes in v2:
> -comedi_pci_auto_config() function prototype is exceeds
> 75 characters per line. Adjust to 75 chars to improve
> readability and also adjust the arguments to match open
> parantheses.
> -Comment section of module_comedi_pci_driver() exceeds 75
> characters. Modified contents to adjust 75 chars per line.
>
> drivers/staging/comedi/comedi_pci.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/staging/comedi/comedi_pci.h b/drivers/staging/comedi/comedi_pci.h
> index 1cc5436cb415..7291d3c0b7dc 100644
> --- a/drivers/staging/comedi/comedi_pci.h
> +++ b/drivers/staging/comedi/comedi_pci.h
> @@ -42,7 +42,7 @@ void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
> struct pci_driver *pci_driver);
>
> /**
> - * module_comedi_pci_driver()-Helper macro for registering a comedi PCI
> + * module_comedi_pci_driver()-Helper macro for registering a comedi PCI
> * driver
> * @__comedi_driver: comedi_driver struct
> * @__pci_driver: pci_driver struct
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Outreachy kernel] [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
2018-10-06 13:57 [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line Bhanusree Pola
2018-10-06 14:07 ` [Outreachy Kernel][PATCH v4] " Bhanusree
@ 2018-10-06 17:55 ` Himanshu Jha
[not found] ` <68d61f32-294d-6056-7b3d-a89735bc539f@gmail.com>
2018-10-06 17:59 ` Himanshu Jha
2 siblings, 1 reply; 13+ messages in thread
From: Himanshu Jha @ 2018-10-06 17:55 UTC (permalink / raw)
To: julia.lawall; +Cc: outreachy-kernel, gregkh
On Sat, Oct 06, 2018 at 07:27:52PM +0530, Bhanusree Pola wrote:
> Adjust all lines exceeding 75 chars per line to fix checkpatch warning.
>
> Signed-off-by: Bhanusree Pola <bhanusreemahesh@gmail.com>
> ---
Your subject says v3 but changelog says v4 ...
> changes in v4:
> -Remove Whitespace in comment section of module_comedi_pci_driver()
> to fix checkpatch Error.
>
> changes in v3:
> -Comment section of module_pci_driver() exceeds 75 characters.
> Adjust the chars to 75 per line
> -Modified log message.
> -Added change log.
>
> changes in v2:
> -comedi_pci_auto_config() function prototype is exceeds
> 75 characters per line. Adjust to 75 chars to improve
> readability and also adjust the arguments to match open
> parantheses.
> -Comment section of module_comedi_pci_driver() exceeds 75
> characters. Modified contents to adjust 75 chars per line.
>
> drivers/staging/comedi/comedi_pci.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/staging/comedi/comedi_pci.h b/drivers/staging/comedi/comedi_pci.h
> index 1cc5436cb415..7291d3c0b7dc 100644
> --- a/drivers/staging/comedi/comedi_pci.h
> +++ b/drivers/staging/comedi/comedi_pci.h
> @@ -42,7 +42,7 @@ void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
> struct pci_driver *pci_driver);
>
> /**
> - * module_comedi_pci_driver()-Helper macro for registering a comedi PCI
> + * module_comedi_pci_driver()-Helper macro for registering a comedi PCI
The change is identical ?
Use `git rebase` to fixup and send again.
> * driver
> * @__comedi_driver: comedi_driver struct
> * @__pci_driver: pci_driver struct
> --
> 2.17.1
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20181006135752.GA3037%40veda-VGN-CS3AGH-R.
> For more options, visit https://groups.google.com/d/optout.
--
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Outreachy kernel] [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
2018-10-06 13:57 [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line Bhanusree Pola
2018-10-06 14:07 ` [Outreachy Kernel][PATCH v4] " Bhanusree
2018-10-06 17:55 ` [Outreachy kernel] [Outreachy Kernel][PATCH v3] " Himanshu Jha
@ 2018-10-06 17:59 ` Himanshu Jha
2018-10-06 18:05 ` Bhanusree
2 siblings, 1 reply; 13+ messages in thread
From: Himanshu Jha @ 2018-10-06 17:59 UTC (permalink / raw)
To: Bhanusree Pola; +Cc: outreachy-kernel, gregkh
On Sat, Oct 06, 2018 at 07:27:52PM +0530, Bhanusree Pola wrote:
> Adjust all lines exceeding 75 chars per line to fix checkpatch warning.
>
Would you mind explaining this:
from: Bhanusree Pola <bhanusreemahesh@gmail.com>
reply-to: himanshujha199640@gmail.com
to: outreachy-kernel@googlegroups.com
cc: bhanusreemahesh@gmail.com,
gregkh@linuxfoundation.org
date: 6 Oct 2018, 16:44
subject: [Outreachy kernel][PATCH v2]staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
mailing list: outreachy-kernel@googlegroups.com Filter messages from this mailing list
mailed-by: googlegroups.com
Signed by: gmail.com
"reply-to" ?
Please check your email settings!
--
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Outreachy kernel] [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
2018-10-06 17:59 ` Himanshu Jha
@ 2018-10-06 18:05 ` Bhanusree
2018-10-06 18:13 ` Himanshu Jha
0 siblings, 1 reply; 13+ messages in thread
From: Bhanusree @ 2018-10-06 18:05 UTC (permalink / raw)
To: Himanshu Jha; +Cc: outreachy-kernel, gregkh
On Saturday 06 October 2018 11:29 PM, Himanshu Jha wrote:
> On Sat, Oct 06, 2018 at 07:27:52PM +0530, Bhanusree Pola wrote:
>> Adjust all lines exceeding 75 chars per line to fix checkpatch warning.
>>
> Would you mind explaining this:
>
> from: Bhanusree Pola <bhanusreemahesh@gmail.com>
> reply-to: himanshujha199640@gmail.com
> to: outreachy-kernel@googlegroups.com
> cc: bhanusreemahesh@gmail.com,
> gregkh@linuxfoundation.org
> date: 6 Oct 2018, 16:44
> subject: [Outreachy kernel][PATCH v2]staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
> mailing list: outreachy-kernel@googlegroups.com Filter messages from this mailing list
> mailed-by: googlegroups.com
> Signed by: gmail.com
>
> "reply-to" ?
>
> >Please check your email settings!
>
I did not understand.What was the mistake i have done ? shouldn't I
mention "reply-to" in specific ?
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Outreachy kernel] [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
[not found] ` <20181006180243.GG6283@himanshu-Vostro-3559>
@ 2018-10-06 18:12 ` Bhanusree
2018-10-06 18:27 ` Himanshu Jha
0 siblings, 1 reply; 13+ messages in thread
From: Bhanusree @ 2018-10-06 18:12 UTC (permalink / raw)
To: Himanshu Jha; +Cc: outreachy-kernel, gregkh
>Then please state that reasoning in subject too ...
>Subject: [PATCH v4] ....
>---
>changelog:
>v4: corrected whitespace error.
>v3: ...
>v2: ...
I made changes mentioned and sent already with Subject:[PATCH v4]. Am I
supposed to send it again?
On Saturday 06 October 2018 11:32 PM, Himanshu Jha wrote:
> On Sat, Oct 06, 2018 at 11:28:36PM +0530, Bhanusree wrote:
>> Change is not identical. In v3 whitespace error is observed. So corrected it
>> and sent as v4 again.
> Then please state that reasoning in subject too ...
>
> Subject: [PATCH v4] ....
>
>
> ---
> changelog:
>
> v4: corrected whitespace error.
> v3: ...
> v2: ...
>
> And use 'reply-all` please!
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Outreachy kernel] [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
2018-10-06 18:05 ` Bhanusree
@ 2018-10-06 18:13 ` Himanshu Jha
2018-10-06 18:15 ` Bhanusree
0 siblings, 1 reply; 13+ messages in thread
From: Himanshu Jha @ 2018-10-06 18:13 UTC (permalink / raw)
To: Bhanusree; +Cc: outreachy-kernel, gregkh
On Sat, Oct 06, 2018 at 11:35:34PM +0530, Bhanusree wrote:
>
>
> On Saturday 06 October 2018 11:29 PM, Himanshu Jha wrote:
> > On Sat, Oct 06, 2018 at 07:27:52PM +0530, Bhanusree Pola wrote:
> > > Adjust all lines exceeding 75 chars per line to fix checkpatch warning.
> > >
> > Would you mind explaining this:
> >
> > from: Bhanusree Pola <bhanusreemahesh@gmail.com>
> > reply-to: himanshujha199640@gmail.com
> > to: outreachy-kernel@googlegroups.com
> > cc: bhanusreemahesh@gmail.com,
> > gregkh@linuxfoundation.org
> > date: 6 Oct 2018, 16:44
> > subject: [Outreachy kernel][PATCH v2]staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
> > mailing list: outreachy-kernel@googlegroups.com Filter messages from this mailing list
> > mailed-by: googlegroups.com
> > Signed by: gmail.com
> >
> > "reply-to" ?
> >
> > >Please check your email settings!
> >
> I did not understand.What was the mistake i have done ? shouldn't I mention
> "reply-to" in specific ?
Lookout for the purpose for "reply-to".
If someone replies to this thread, that reply would go to address
mentioned in the "reply-to" which is currently my email address.
reply-to: himanshujha199640@gmail.com
I hope I'm clear now.
You can add *your* secondary address in reply-to if you want to
receive the reply at that specified address.
--
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Outreachy kernel] [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
2018-10-06 18:13 ` Himanshu Jha
@ 2018-10-06 18:15 ` Bhanusree
0 siblings, 0 replies; 13+ messages in thread
From: Bhanusree @ 2018-10-06 18:15 UTC (permalink / raw)
To: Himanshu Jha; +Cc: outreachy-kernel, gregkh
Thank you.
On Saturday 06 October 2018 11:43 PM, Himanshu Jha wrote:
> On Sat, Oct 06, 2018 at 11:35:34PM +0530, Bhanusree wrote:
>>
>> On Saturday 06 October 2018 11:29 PM, Himanshu Jha wrote:
>>> On Sat, Oct 06, 2018 at 07:27:52PM +0530, Bhanusree Pola wrote:
>>>> Adjust all lines exceeding 75 chars per line to fix checkpatch warning.
>>>>
>>> Would you mind explaining this:
>>>
>>> from: Bhanusree Pola <bhanusreemahesh@gmail.com>
>>> reply-to: himanshujha199640@gmail.com
>>> to: outreachy-kernel@googlegroups.com
>>> cc: bhanusreemahesh@gmail.com,
>>> gregkh@linuxfoundation.org
>>> date: 6 Oct 2018, 16:44
>>> subject: [Outreachy kernel][PATCH v2]staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
>>> mailing list: outreachy-kernel@googlegroups.com Filter messages from this mailing list
>>> mailed-by: googlegroups.com
>>> Signed by: gmail.com
>>>
>>> "reply-to" ?
>>>
>>>> Please check your email settings!
>> I did not understand.What was the mistake i have done ? shouldn't I mention
>> "reply-to" in specific ?
> Lookout for the purpose for "reply-to".
>
> If someone replies to this thread, that reply would go to address
> mentioned in the "reply-to" which is currently my email address.
>
> reply-to: himanshujha199640@gmail.com
>
> I hope I'm clear now.
>
> You can add *your* secondary address in reply-to if you want to
> receive the reply at that specified address.
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Outreachy kernel] [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
2018-10-06 18:12 ` Bhanusree
@ 2018-10-06 18:27 ` Himanshu Jha
2018-10-06 18:29 ` Bhanusree
0 siblings, 1 reply; 13+ messages in thread
From: Himanshu Jha @ 2018-10-06 18:27 UTC (permalink / raw)
To: Bhanusree; +Cc: outreachy-kernel, gregkh
On Sat, Oct 06, 2018 at 11:42:16PM +0530, Bhanusree wrote:
> > Then please state that reasoning in subject too ...
>
> > Subject: [PATCH v4] ....
>
>
> > ---
> > changelog:
>
> > v4: corrected whitespace error.
> > v3: ...
> > v2: ...
>
> I made changes mentioned and sent already with Subject:[PATCH v4]. Am I
> supposed to send it again?
Ah, I see.
Subject: [Outreachy kernel] Re: [Outreachy Kernel][PATCH v4] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
You send the patch as a "Re:" as you forgot to use `get_maintainer`
in the first place.
Took me some time to figure that out.
And I think this is not the correct way.
--
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Outreachy kernel] [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
2018-10-06 18:27 ` Himanshu Jha
@ 2018-10-06 18:29 ` Bhanusree
2018-10-06 18:32 ` Himanshu Jha
0 siblings, 1 reply; 13+ messages in thread
From: Bhanusree @ 2018-10-06 18:29 UTC (permalink / raw)
To: Himanshu Jha; +Cc: outreachy-kernel, gregkh
Please let me know what to do on this ?
On Saturday 06 October 2018 11:57 PM, Himanshu Jha wrote:
> On Sat, Oct 06, 2018 at 11:42:16PM +0530, Bhanusree wrote:
>>> Then please state that reasoning in subject too ...
>>> Subject: [PATCH v4] ....
>>
>>> ---
>>> changelog:
>>> v4: corrected whitespace error.
>>> v3: ...
>>> v2: ...
>> I made changes mentioned and sent already with Subject:[PATCH v4]. Am I
>> supposed to send it again?
> Ah, I see.
>
> Subject: [Outreachy kernel] Re: [Outreachy Kernel][PATCH v4] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
>
> You send the patch as a "Re:" as you forgot to use `get_maintainer`
> in the first place.
>
> Took me some time to figure that out.
>
> And I think this is not the correct way.
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Outreachy kernel] [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
2018-10-06 18:29 ` Bhanusree
@ 2018-10-06 18:32 ` Himanshu Jha
2018-10-06 18:48 ` Bhanusree
0 siblings, 1 reply; 13+ messages in thread
From: Himanshu Jha @ 2018-10-06 18:32 UTC (permalink / raw)
To: Bhanusree; +Cc: outreachy-kernel, gregkh
On Sat, Oct 06, 2018 at 11:59:02PM +0530, Bhanusree wrote:
> Please let me know what to do on this ?
Send a new patch with v5 with changelog.
And don't top-post!
--
Himanshu Jha
Undergraduate Student
Department of Electronics & Communication
Guru Tegh Bahadur Institute of Technology
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Outreachy kernel] [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
2018-10-06 18:32 ` Himanshu Jha
@ 2018-10-06 18:48 ` Bhanusree
2018-10-06 18:53 ` Julia Lawall
0 siblings, 1 reply; 13+ messages in thread
From: Bhanusree @ 2018-10-06 18:48 UTC (permalink / raw)
To: Himanshu Jha; +Cc: outreachy-kernel, gregkh
On Sunday 07 October 2018 12:02 AM, Himanshu Jha wrote:
> On Sat, Oct 06, 2018 at 11:59:02PM +0530, Bhanusree wrote:
>> Please let me know what to do on this ?
> > Send a new patch with v5 with changelog.
Can I mention 'No changes in v5' in change log or am I supposed to
mention any ?
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Outreachy kernel] [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line
2018-10-06 18:48 ` Bhanusree
@ 2018-10-06 18:53 ` Julia Lawall
0 siblings, 0 replies; 13+ messages in thread
From: Julia Lawall @ 2018-10-06 18:53 UTC (permalink / raw)
To: Bhanusree; +Cc: Himanshu Jha, outreachy-kernel, gregkh
On Sun, 7 Oct 2018, Bhanusree wrote:
>
>
> On Sunday 07 October 2018 12:02 AM, Himanshu Jha wrote:
> > On Sat, Oct 06, 2018 at 11:59:02PM +0530, Bhanusree wrote:
> > > Please let me know what to do on this ?
> > > Send a new patch with v5 with changelog.
> Can I mention 'No changes in v5' in change log or am I supposed to mention any
> ?
Your comments about the changes in the version go under the --- so that
they don't appear in the change log. If there are no changes in some
cases, then you should mention that.
julia
>
> --
> You received this message because you are subscribed to the Google Groups
> "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/outreachy-kernel/4e37d6bc-9b6f-f128-38fc-8fca295573d4%40gmail.com.
> For more options, visit https://groups.google.com/d/optout.
>
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2018-10-06 18:53 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-06 13:57 [Outreachy Kernel][PATCH v3] staging:comedi:comedi_pci.h Prefer a maximum 75 chars per line Bhanusree Pola
2018-10-06 14:07 ` [Outreachy Kernel][PATCH v4] " Bhanusree
2018-10-06 17:55 ` [Outreachy kernel] [Outreachy Kernel][PATCH v3] " Himanshu Jha
[not found] ` <68d61f32-294d-6056-7b3d-a89735bc539f@gmail.com>
[not found] ` <20181006180243.GG6283@himanshu-Vostro-3559>
2018-10-06 18:12 ` Bhanusree
2018-10-06 18:27 ` Himanshu Jha
2018-10-06 18:29 ` Bhanusree
2018-10-06 18:32 ` Himanshu Jha
2018-10-06 18:48 ` Bhanusree
2018-10-06 18:53 ` Julia Lawall
2018-10-06 17:59 ` Himanshu Jha
2018-10-06 18:05 ` Bhanusree
2018-10-06 18:13 ` Himanshu Jha
2018-10-06 18:15 ` Bhanusree
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.