ERROR: problem:package openssh-7.6p1-r0.i586 conflicts with dropbear provided by dropbear-2017.75-r0.i586

ERROR: problem:package openssh-7.6p1-r0.i586 conflicts with dropbear provided by dropbear-2017.75-r0.i586

[Aditya Tayade]

[-- Attachment #1.1: Type: text/plain, Size: 947 bytes --]

Hi,


I trying to build core-image-sato using yocto 2.5 with new package openssh.


Added openssh entry in the local.conf file as follows:

IMAGE_INSTALL_append = "openssh"


But facing some conflicts error. Please refer attached log file for more information.


Could you please help to resolve the issue. I need to use use openssh for ssh rather than dropbear.



Regards,

Aditya Tayade

This message contains information that may be privileged or confidential and is the property of the KPIT Technologies Ltd. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message. KPIT Technologies Ltd. does not accept any liability for virus infected mails.

[-- Attachment #1.2: Type: text/html, Size: 2192 bytes --]

[-- Attachment #2: package_conflicts.txt --]
[-- Type: text/plain, Size: 2792 bytes --]

ERROR: core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command '/home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf -y -c /home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf --setopt=reposdir=/home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d --repofrompath=oe-repo,/home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo --installroot=/home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/rootfs --setopt=logdir=/home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/temp --nogpgcheck install locale-base-en-us locale-base-en-gb os-release automake mosquitto gdb libsamplerate0 libfribidi0 liburcu ltrace libatomic-ops cmake devmem2 libgif7 krb5 rpm libtinyxml2-5 python-dbus bison libtool kbd kernel-devsrc tcpdump opkg-arch-config libsqlite0 strongswan asio hdparm acpid vlan python-pygobject coreutils mmc-utils eglinfo-fb gnu-config libdnet run-postinsts fbset-modes libacpi0 kexec-tools polkit ebtables gperftools nftables dnf libaio1 libyaml-0-2 mesa libical smartmontools openssh icu lz4 libjson-c3 opkg-utils git boost i2c-tools bridge-utils ccache packagegroup-base-extended lsof autofs mtools linux-firmware perf lrzsz packagegroup-core-boot libprotobuf15 findutils curl packagegroup-core-ssh-dropbear packagegroup-core-x11-sato gcc-sanitizers ppp libfuse2 canutils gettext libnewt0.52 mozjs libatasmart4 udisks2 psplash libqrencode4 packagegroup-core-x11-base opkg libxslt lighttpd libdbus-glib-1-2 libgudev-1.0-0 libnftnl7 dbus-1 libusb-0.1-4 lua lttng-ust libsocketcan2 nano libcgroup libssh2-1 libcheck iw mailx pseudo hello' returned 1:
Added oe-repo repo from /home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
Last metadata expiration check: 0:00:01 ago on Mon 02 Apr 2018 09:20:12 AM UTC.
Error: 
 Problem: package packagegroup-core-ssh-dropbear-1.0-r1.noarch requires dropbear, but none of the providers can be installed
  - package openssh-7.6p1-r0.i586 conflicts with dropbear provided by dropbear-2017.75-r0.i586
  - conflicting requests
(try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages)

ERROR: core-image-sato-1.0-r0 do_rootfs: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/temp/log.do_rootfs.4050
ERROR: Task (/home/aditya/mywork/poky/meta/recipes-sato/images/core-image-sato.bb:do_rootfs) failed with exit code '1'

ERROR: problem:package openssh-7.6p1-r0.i586 conflicts with dropbear provided by dropbear-2017.75-r0.i586

[Aditya Tayade]

[-- Attachment #1.1: Type: text/plain, Size: 949 bytes --]


Hi,


I trying to build core-image-sato using yocto 2.5 with new package openssh.


Added openssh entry in the local.conf file as follows:

IMAGE_INSTALL_append = "openssh"


But facing some conflicts error. Please refer attached log file for more information.


Could you please help to resolve the issue. I need to use use openssh for ssh rather than dropbear.



Regards,

Aditya Tayade

This message contains information that may be privileged or confidential and is the property of the KPIT Technologies Ltd. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message. KPIT Technologies Ltd. does not accept any liability for virus infected mails.

[-- Attachment #1.2: Type: text/html, Size: 2385 bytes --]

[-- Attachment #2: package_conflicts.txt --]
[-- Type: text/plain, Size: 2792 bytes --]

ERROR: core-image-sato-1.0-r0 do_rootfs: Could not invoke dnf. Command '/home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf -y -c /home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/rootfs/etc/dnf/dnf.conf --setopt=reposdir=/home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/rootfs/etc/yum.repos.d --repofrompath=oe-repo,/home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo --installroot=/home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/rootfs --setopt=logdir=/home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/temp --nogpgcheck install locale-base-en-us locale-base-en-gb os-release automake mosquitto gdb libsamplerate0 libfribidi0 liburcu ltrace libatomic-ops cmake devmem2 libgif7 krb5 rpm libtinyxml2-5 python-dbus bison libtool kbd kernel-devsrc tcpdump opkg-arch-config libsqlite0 strongswan asio hdparm acpid vlan python-pygobject coreutils mmc-utils eglinfo-fb gnu-config libdnet run-postinsts fbset-modes libacpi0 kexec-tools polkit ebtables gperftools nftables dnf libaio1 libyaml-0-2 mesa libical smartmontools openssh icu lz4 libjson-c3 opkg-utils git boost i2c-tools bridge-utils ccache packagegroup-base-extended lsof autofs mtools linux-firmware perf lrzsz packagegroup-core-boot libprotobuf15 findutils curl packagegroup-core-ssh-dropbear packagegroup-core-x11-sato gcc-sanitizers ppp libfuse2 canutils gettext libnewt0.52 mozjs libatasmart4 udisks2 psplash libqrencode4 packagegroup-core-x11-base opkg libxslt lighttpd libdbus-glib-1-2 libgudev-1.0-0 libnftnl7 dbus-1 libusb-0.1-4 lua lttng-ust libsocketcan2 nano libcgroup libssh2-1 libcheck iw mailx pseudo hello' returned 1:
Added oe-repo repo from /home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
Last metadata expiration check: 0:00:01 ago on Mon 02 Apr 2018 09:20:12 AM UTC.
Error: 
 Problem: package packagegroup-core-ssh-dropbear-1.0-r1.noarch requires dropbear, but none of the providers can be installed
  - package openssh-7.6p1-r0.i586 conflicts with dropbear provided by dropbear-2017.75-r0.i586
  - conflicting requests
(try to add '--allowerasing' to command line to replace conflicting packages or '--skip-broken' to skip uninstallable packages)

ERROR: core-image-sato-1.0-r0 do_rootfs: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /home/aditya/mywork/poky/build-hello/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/temp/log.do_rootfs.4050
ERROR: Task (/home/aditya/mywork/poky/meta/recipes-sato/images/core-image-sato.bb:do_rootfs) failed with exit code '1'

Re: ERROR: problem:package openssh-7.6p1-r0.i586 conflicts with dropbear provided by dropbear-2017.75-r0.i586

[Khem Raj]

On Mon, Apr 2, 2018 at 6:02 AM, Aditya Tayade <Aditya.Tayade@kpit.com> wrote:
>
> Hi,
>
>
> I trying to build core-image-sato using yocto 2.5 with new package openssh.
>
>
> Added openssh entry in the local.conf file as follows:
>
> IMAGE_INSTALL_append = "openssh"
>
>
> But facing some conflicts error. Please refer attached log file for more
> information.
>
>
> Could you please help to resolve the issue. I need to use use openssh for
> ssh rather than dropbear.
>
>

you can use image features,

something like EXTRA_IMAGE_FEATURES_append = " ssh-server-openssh" in
local.conf

For more info read the particular subsection in manual

https://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#ref-features-image

>
> Regards,
>
> Aditya Tayade
>
> This message contains information that may be privileged or confidential and
> is the property of the KPIT Technologies Ltd. It is intended only for the
> person to whom it is addressed. If you are not the intended recipient, you
> are not authorized to read, print, retain copy, disseminate, distribute, or
> use this message or any part thereof. If you receive this message in error,
> please notify the sender immediately and delete all copies of this message.
> KPIT Technologies Ltd. does not accept any liability for virus infected
> mails.
>
> --
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
>

Re: ERROR: problem:package openssh-7.6p1-r0.i586 conflicts with dropbear provided by dropbear-2017.75-r0.i586

[Sandeep G.R]

[-- Attachment #1: Type: text/plain, Size: 1356 bytes --]

Add this to local.conf

PACKAGE_EXCLUDE += " packagegroup-core-ssh-dropbear"

*Thanks,*
*Sandeep*


On Mon, Apr 2, 2018 at 4:38 AM, Aditya Tayade <Aditya.Tayade@kpit.com>
wrote:

> Hi,
>
>
> I trying to build core-image-sato using yocto 2.5 with new package openssh.
>
>
> Added openssh entry in the local.conf file as follows:
>
> IMAGE_INSTALL_append = "openssh"
>
>
> But facing some conflicts error. Please refer attached log file for more
> information.
>
>
> Could you please help to resolve the issue. I need to use use openssh for
> ssh rather than dropbear.
>
>
>
> Regards,
>
> Aditya Tayade
> This message contains information that may be privileged or confidential
> and is the property of the KPIT Technologies Ltd. It is intended only for
> the person to whom it is addressed. If you are not the intended recipient,
> you are not authorized to read, print, retain copy, disseminate,
> distribute, or use this message or any part thereof. If you receive this
> message in error, please notify the sender immediately and delete all
> copies of this message. KPIT Technologies Ltd. does not accept any
> liability for virus infected mails.
>
> --
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>
>

[-- Attachment #2: Type: text/html, Size: 3480 bytes --]

Re: ERROR: problem:package openssh-7.6p1-r0.i586 conflicts with dropbear provided by dropbear-2017.75-r0.i586

[Alexander Kanavin]

On 04/02/2018 01:38 PM, Aditya Tayade wrote:
> I trying to build core-image-sato using yocto 2.5 with new package openssh.
> 
> 
> Added openssh entry in the local.conf file as follows:
> 
> IMAGE_INSTALL_append = "openssh"
> 
> 
> But facing some conflicts error. Please refer attached log file for more 
> information.
> 
> 
> Could you please help to resolve the issue. I need to use use openssh 
> for ssh rather than dropbear.

Core-image-sato specifies dropbear as the ssh server. You need to make 
your own image recipe (you can copy core-image-sato as a starting 
point), and then tweak it the way you need.

Alex