* [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE @ 2021-03-10 6:58 Michal Orzel 2021-03-10 8:05 ` Bertrand Marquis ` (2 more replies) 0 siblings, 3 replies; 14+ messages in thread From: Michal Orzel @ 2021-03-10 6:58 UTC (permalink / raw) To: xen-devel Cc: Stefano Stabellini, Julien Grall, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Ian Jackson, Jan Beulich, Wei Liu, bertrand.marquis Currently in order to link existing DTB into Xen image we need to either specify option CONFIG_DTB_FILE on the command line or manually add it into .config. Add Kconfig entry: CONFIG_DTB_FILE to be able to provide the path to DTB we want to embed into Xen image. If no path provided - the dtb will not be embedded. Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" as it is not needed since Kconfig will define it in a header with all the other config options. Signed-off-by: Michal Orzel <michal.orzel@arm.com> --- xen/arch/arm/Makefile | 5 ++--- xen/common/Kconfig | 8 ++++++++ 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile index 16e6523e2c..46e6a95fec 100644 --- a/xen/arch/arm/Makefile +++ b/xen/arch/arm/Makefile @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o #obj-bin-y += ....o -ifdef CONFIG_DTB_FILE +ifneq ($(CONFIG_DTB_FILE),"") obj-y += dtb.o -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" endif ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS) @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c xen.lds: xen.lds.S $(CPP) -P $(a_flags) -MQ $@ -o $@ $< -dtb.o: $(CONFIG_DTB_FILE) +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE)) .PHONY: clean clean:: diff --git a/xen/common/Kconfig b/xen/common/Kconfig index eb953d171e..a27836bf47 100644 --- a/xen/common/Kconfig +++ b/xen/common/Kconfig @@ -400,6 +400,14 @@ config DOM0_MEM Leave empty if you are not sure what to specify. +config DTB_FILE + string "Absolute path to device tree blob" + depends on HAS_DEVICE_TREE + ---help--- + When using a bootloader that has no device tree support or when there + is no bootloader at all, use this option to specify the absolute path + to a device tree that will be linked directly inside Xen binary. + config TRACEBUFFER bool "Enable tracing infrastructure" if EXPERT default y -- 2.29.0 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-10 6:58 [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE Michal Orzel @ 2021-03-10 8:05 ` Bertrand Marquis 2021-03-10 9:00 ` Jan Beulich 2021-03-11 10:34 ` Julien Grall 2 siblings, 0 replies; 14+ messages in thread From: Bertrand Marquis @ 2021-03-10 8:05 UTC (permalink / raw) To: Michal Orzel Cc: Xen-devel, Stefano Stabellini, Julien Grall, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Ian Jackson, Jan Beulich, Wei Liu Hi, > On 10 Mar 2021, at 07:58, Michal Orzel <Michal.Orzel@arm.com> wrote: > > Currently in order to link existing DTB into Xen image > we need to either specify option CONFIG_DTB_FILE on the > command line or manually add it into .config. > Add Kconfig entry: CONFIG_DTB_FILE to be able to > provide the path to DTB we want to embed into Xen image. > If no path provided - the dtb will not be embedded. > > Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" > as it is not needed since Kconfig will define it in a header > with all the other config options. > > Signed-off-by: Michal Orzel <michal.orzel@arm.com> Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com> Cheers Bertrand > --- > xen/arch/arm/Makefile | 5 ++--- > xen/common/Kconfig | 8 ++++++++ > 2 files changed, 10 insertions(+), 3 deletions(-) > > diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile > index 16e6523e2c..46e6a95fec 100644 > --- a/xen/arch/arm/Makefile > +++ b/xen/arch/arm/Makefile > @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o > > #obj-bin-y += ....o > > -ifdef CONFIG_DTB_FILE > +ifneq ($(CONFIG_DTB_FILE),"") > obj-y += dtb.o > -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" > endif > > ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS) > @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c > xen.lds: xen.lds.S > $(CPP) -P $(a_flags) -MQ $@ -o $@ $< > > -dtb.o: $(CONFIG_DTB_FILE) > +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE)) > > .PHONY: clean > clean:: > diff --git a/xen/common/Kconfig b/xen/common/Kconfig > index eb953d171e..a27836bf47 100644 > --- a/xen/common/Kconfig > +++ b/xen/common/Kconfig > @@ -400,6 +400,14 @@ config DOM0_MEM > > Leave empty if you are not sure what to specify. > > +config DTB_FILE > + string "Absolute path to device tree blob" > + depends on HAS_DEVICE_TREE > + ---help--- > + When using a bootloader that has no device tree support or when there > + is no bootloader at all, use this option to specify the absolute path > + to a device tree that will be linked directly inside Xen binary. > + > config TRACEBUFFER > bool "Enable tracing infrastructure" if EXPERT > default y > -- > 2.29.0 > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-10 6:58 [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE Michal Orzel 2021-03-10 8:05 ` Bertrand Marquis @ 2021-03-10 9:00 ` Jan Beulich 2021-03-10 11:33 ` Ian Jackson 2021-03-11 10:34 ` Julien Grall 2 siblings, 1 reply; 14+ messages in thread From: Jan Beulich @ 2021-03-10 9:00 UTC (permalink / raw) To: Michal Orzel Cc: Stefano Stabellini, Julien Grall, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Ian Jackson, Wei Liu, bertrand.marquis, xen-devel On 10.03.2021 07:58, Michal Orzel wrote: > --- a/xen/common/Kconfig > +++ b/xen/common/Kconfig > @@ -400,6 +400,14 @@ config DOM0_MEM > > Leave empty if you are not sure what to specify. > > +config DTB_FILE > + string "Absolute path to device tree blob" > + depends on HAS_DEVICE_TREE > + ---help--- > + When using a bootloader that has no device tree support or when there > + is no bootloader at all, use this option to specify the absolute path > + to a device tree that will be linked directly inside Xen binary. Nit: Linux, iirc, has dropped support for ---help--- (allowing only help now). To limit churn whenever we're going to re-sync our kconfig again, I'd like to avoid introduction of new uses of the old form. I'm sure this could be taken care of while committing. Jan ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-10 9:00 ` Jan Beulich @ 2021-03-10 11:33 ` Ian Jackson 2021-03-10 11:40 ` Julien Grall 0 siblings, 1 reply; 14+ messages in thread From: Ian Jackson @ 2021-03-10 11:33 UTC (permalink / raw) To: Jan Beulich Cc: Michal Orzel, Stefano Stabellini, Julien Grall, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Wei Liu, bertrand.marquis, xen-devel Jan Beulich writes ("Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE"): > Nit: Linux, iirc, has dropped support for ---help--- (allowing > only help now). To limit churn whenever we're going to re-sync > our kconfig again, I'd like to avoid introduction of new uses > of the old form. I'm sure this could be taken care of while > committing. At this stage of the release I would prefer to avoid updates made by the committer when committing. Ie the thing that is committed should have been previously posted and had at least some minimal time to spot howlers. Thanks, Ian. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-10 11:33 ` Ian Jackson @ 2021-03-10 11:40 ` Julien Grall 2021-03-10 13:36 ` Ian Jackson 0 siblings, 1 reply; 14+ messages in thread From: Julien Grall @ 2021-03-10 11:40 UTC (permalink / raw) To: Ian Jackson, Jan Beulich Cc: Michal Orzel, Stefano Stabellini, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Wei Liu, bertrand.marquis, xen-devel Hi Ian, On 10/03/2021 11:33, Ian Jackson wrote: > Jan Beulich writes ("Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE"): >> Nit: Linux, iirc, has dropped support for ---help--- (allowing >> only help now). To limit churn whenever we're going to re-sync >> our kconfig again, I'd like to avoid introduction of new uses >> of the old form. I'm sure this could be taken care of while >> committing. > > At this stage of the release I would prefer to avoid updates made by > the committer when committing. Ie the thing that is committed should > have been previously posted and had at least some minimal time to spot > howlers. I was under the impression that this patch would not target 4.15. At least I didn't see any request for it. Cheers, -- Julien Grall ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-10 11:40 ` Julien Grall @ 2021-03-10 13:36 ` Ian Jackson 2021-03-11 9:17 ` Michal Orzel 0 siblings, 1 reply; 14+ messages in thread From: Ian Jackson @ 2021-03-10 13:36 UTC (permalink / raw) To: Julien Grall Cc: Jan Beulich, Michal Orzel, Stefano Stabellini, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Wei Liu, bertrand.marquis, xen-devel Julien Grall writes ("Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE"): > I was under the impression that this patch would not target 4.15. At > least I didn't see any request for it. OK, good :-). Thanks, Ian. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-10 13:36 ` Ian Jackson @ 2021-03-11 9:17 ` Michal Orzel 0 siblings, 0 replies; 14+ messages in thread From: Michal Orzel @ 2021-03-11 9:17 UTC (permalink / raw) To: Ian Jackson, Julien Grall Cc: Jan Beulich, Stefano Stabellini, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Wei Liu, bertrand.marquis, xen-devel On 10.03.2021 14:36, Ian Jackson wrote: > Julien Grall writes ("Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE"): >> I was under the impression that this patch would not target 4.15. At >> least I didn't see any request for it. > > OK, good :-). > > Thanks, > Ian. > So do you guys want me to push v5 now with fix "help" or will the commiter do this? Michal ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-10 6:58 [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE Michal Orzel 2021-03-10 8:05 ` Bertrand Marquis 2021-03-10 9:00 ` Jan Beulich @ 2021-03-11 10:34 ` Julien Grall 2021-03-11 10:41 ` Michal Orzel 2 siblings, 1 reply; 14+ messages in thread From: Julien Grall @ 2021-03-11 10:34 UTC (permalink / raw) To: Michal Orzel, xen-devel Cc: Stefano Stabellini, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Ian Jackson, Jan Beulich, Wei Liu, bertrand.marquis Hi Michal, On 10/03/2021 06:58, Michal Orzel wrote: > Currently in order to link existing DTB into Xen image > we need to either specify option CONFIG_DTB_FILE on the > command line or manually add it into .config. > Add Kconfig entry: CONFIG_DTB_FILE to be able to > provide the path to DTB we want to embed into Xen image. > If no path provided - the dtb will not be embedded. > > Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" > as it is not needed since Kconfig will define it in a header > with all the other config options. > > Signed-off-by: Michal Orzel <michal.orzel@arm.com> > --- > xen/arch/arm/Makefile | 5 ++--- > xen/common/Kconfig | 8 ++++++++ > 2 files changed, 10 insertions(+), 3 deletions(-) > > diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile > index 16e6523e2c..46e6a95fec 100644 > --- a/xen/arch/arm/Makefile > +++ b/xen/arch/arm/Makefile > @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o > > #obj-bin-y += ....o > > -ifdef CONFIG_DTB_FILE > +ifneq ($(CONFIG_DTB_FILE),"") > obj-y += dtb.o > -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" > endif > > ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS) > @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c > xen.lds: xen.lds.S > $(CPP) -P $(a_flags) -MQ $@ -o $@ $< > > -dtb.o: $(CONFIG_DTB_FILE) > +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE)) > > .PHONY: clean > clean:: > diff --git a/xen/common/Kconfig b/xen/common/Kconfig > index eb953d171e..a27836bf47 100644 > --- a/xen/common/Kconfig > +++ b/xen/common/Kconfig > @@ -400,6 +400,14 @@ config DOM0_MEM > > Leave empty if you are not sure what to specify. > > +config DTB_FILE > + string "Absolute path to device tree blob" > + depends on HAS_DEVICE_TREE > + ---help--- > + When using a bootloader that has no device tree support or when there > + is no bootloader at all, use this option to specify the absolute path > + to a device tree that will be linked directly inside Xen binary. With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge. So I think we need a second config to that indicates whether the string is empty or not. Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "". Cheers, -- Julien Grall ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-11 10:34 ` Julien Grall @ 2021-03-11 10:41 ` Michal Orzel 2021-03-11 11:11 ` Julien Grall 0 siblings, 1 reply; 14+ messages in thread From: Michal Orzel @ 2021-03-11 10:41 UTC (permalink / raw) To: Julien Grall, xen-devel Cc: Stefano Stabellini, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Ian Jackson, Jan Beulich, Wei Liu, bertrand.marquis Hi Julien, On 11.03.2021 11:34, Julien Grall wrote: > Hi Michal, > > On 10/03/2021 06:58, Michal Orzel wrote: >> Currently in order to link existing DTB into Xen image >> we need to either specify option CONFIG_DTB_FILE on the >> command line or manually add it into .config. >> Add Kconfig entry: CONFIG_DTB_FILE to be able to >> provide the path to DTB we want to embed into Xen image. >> If no path provided - the dtb will not be embedded. >> >> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >> as it is not needed since Kconfig will define it in a header >> with all the other config options. >> >> Signed-off-by: Michal Orzel <michal.orzel@arm.com> >> --- >> xen/arch/arm/Makefile | 5 ++--- >> xen/common/Kconfig | 8 ++++++++ >> 2 files changed, 10 insertions(+), 3 deletions(-) >> >> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile >> index 16e6523e2c..46e6a95fec 100644 >> --- a/xen/arch/arm/Makefile >> +++ b/xen/arch/arm/Makefile >> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o >> #obj-bin-y += ....o >> -ifdef CONFIG_DTB_FILE >> +ifneq ($(CONFIG_DTB_FILE),"") >> obj-y += dtb.o >> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >> endif >> ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS) >> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c >> xen.lds: xen.lds.S >> $(CPP) -P $(a_flags) -MQ $@ -o $@ $< >> -dtb.o: $(CONFIG_DTB_FILE) >> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE)) >> .PHONY: clean >> clean:: >> diff --git a/xen/common/Kconfig b/xen/common/Kconfig >> index eb953d171e..a27836bf47 100644 >> --- a/xen/common/Kconfig >> +++ b/xen/common/Kconfig >> @@ -400,6 +400,14 @@ config DOM0_MEM >> Leave empty if you are not sure what to specify. >> +config DTB_FILE >> + string "Absolute path to device tree blob" >> + depends on HAS_DEVICE_TREE >> + ---help--- >> + When using a bootloader that has no device tree support or when there >> + is no bootloader at all, use this option to specify the absolute path >> + to a device tree that will be linked directly inside Xen binary. > > With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge. > > So I think we need a second config to that indicates whether the string is empty or not. > > Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "". > > Cheers, > I do not agrree. We do not need another config. If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary. The dtb.o will be compiled and embedded into Xen if and only if the path to dtb was given. Cheers, Michal ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-11 10:41 ` Michal Orzel @ 2021-03-11 11:11 ` Julien Grall 2021-03-11 12:39 ` Michal Orzel 0 siblings, 1 reply; 14+ messages in thread From: Julien Grall @ 2021-03-11 11:11 UTC (permalink / raw) To: Michal Orzel, xen-devel Cc: Stefano Stabellini, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Ian Jackson, Jan Beulich, Wei Liu, bertrand.marquis On 11/03/2021 10:41, Michal Orzel wrote: > Hi Julien, Hi, > > On 11.03.2021 11:34, Julien Grall wrote: >> Hi Michal, >> >> On 10/03/2021 06:58, Michal Orzel wrote: >>> Currently in order to link existing DTB into Xen image >>> we need to either specify option CONFIG_DTB_FILE on the >>> command line or manually add it into .config. >>> Add Kconfig entry: CONFIG_DTB_FILE to be able to >>> provide the path to DTB we want to embed into Xen image. >>> If no path provided - the dtb will not be embedded. >>> >>> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >>> as it is not needed since Kconfig will define it in a header >>> with all the other config options. >>> >>> Signed-off-by: Michal Orzel <michal.orzel@arm.com> >>> --- >>> xen/arch/arm/Makefile | 5 ++--- >>> xen/common/Kconfig | 8 ++++++++ >>> 2 files changed, 10 insertions(+), 3 deletions(-) >>> >>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile >>> index 16e6523e2c..46e6a95fec 100644 >>> --- a/xen/arch/arm/Makefile >>> +++ b/xen/arch/arm/Makefile >>> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o >>> #obj-bin-y += ....o >>> -ifdef CONFIG_DTB_FILE >>> +ifneq ($(CONFIG_DTB_FILE),"") >>> obj-y += dtb.o >>> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >>> endif >>> ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS) >>> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c >>> xen.lds: xen.lds.S >>> $(CPP) -P $(a_flags) -MQ $@ -o $@ $< >>> -dtb.o: $(CONFIG_DTB_FILE) >>> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE)) >>> .PHONY: clean >>> clean:: >>> diff --git a/xen/common/Kconfig b/xen/common/Kconfig >>> index eb953d171e..a27836bf47 100644 >>> --- a/xen/common/Kconfig >>> +++ b/xen/common/Kconfig >>> @@ -400,6 +400,14 @@ config DOM0_MEM >>> Leave empty if you are not sure what to specify. >>> +config DTB_FILE >>> + string "Absolute path to device tree blob" >>> + depends on HAS_DEVICE_TREE >>> + ---help--- >>> + When using a bootloader that has no device tree support or when there >>> + is no bootloader at all, use this option to specify the absolute path >>> + to a device tree that will be linked directly inside Xen binary. >> >> With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge. >> >> So I think we need a second config to that indicates whether the string is empty or not. >> >> Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "". >> >> Cheers, >> > I do not agrree. We do not need another config. Did you test that Xen will still boot if the string is empty? > If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary. The dtb.o will not be created but the section will because the linker use #ifdef CONFIG_DTB_FILE: 42sh> grep CONFIG_DTB .config CONFIG_DTB_FILE="" 42sh> nm xen-syms | grep _sdtb 00000000003560f8 B _sdtb And to show this is going to be used: 42sh> git diff diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S index 5d44667bd89d..2b680b8226d2 100644 --- a/xen/arch/arm/arm64/head.S +++ b/xen/arch/arm/arm64/head.S @@ -297,6 +297,7 @@ real_start_efi: /* Using the DTB in the .dtb section? */ #ifdef CONFIG_DTB_FILE + e load_paddr x21, _sdtb #endif 42hs> make [...] CC arm64/head.o arm64/head.S: Assembler messages: arm64/head.S:300: Error: unknown mnemonic `e' -- `e' /home/ANT.AMAZON.COM/jgrall/works/oss/xen/xen/Rules.mk:204: recipe for target 'arm64/head.o' failed So _sdtb is going to always be used... Cheers, -- Julien Grall ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-11 11:11 ` Julien Grall @ 2021-03-11 12:39 ` Michal Orzel 2021-03-11 13:10 ` Jan Beulich 0 siblings, 1 reply; 14+ messages in thread From: Michal Orzel @ 2021-03-11 12:39 UTC (permalink / raw) To: Julien Grall, xen-devel Cc: Stefano Stabellini, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Ian Jackson, Jan Beulich, Wei Liu, bertrand.marquis On 11.03.2021 12:11, Julien Grall wrote: > > > On 11/03/2021 10:41, Michal Orzel wrote: >> Hi Julien, > > Hi, > >> >> On 11.03.2021 11:34, Julien Grall wrote: >>> Hi Michal, >>> >>> On 10/03/2021 06:58, Michal Orzel wrote: >>>> Currently in order to link existing DTB into Xen image >>>> we need to either specify option CONFIG_DTB_FILE on the >>>> command line or manually add it into .config. >>>> Add Kconfig entry: CONFIG_DTB_FILE to be able to >>>> provide the path to DTB we want to embed into Xen image. >>>> If no path provided - the dtb will not be embedded. >>>> >>>> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >>>> as it is not needed since Kconfig will define it in a header >>>> with all the other config options. >>>> >>>> Signed-off-by: Michal Orzel <michal.orzel@arm.com> >>>> --- >>>> xen/arch/arm/Makefile | 5 ++--- >>>> xen/common/Kconfig | 8 ++++++++ >>>> 2 files changed, 10 insertions(+), 3 deletions(-) >>>> >>>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile >>>> index 16e6523e2c..46e6a95fec 100644 >>>> --- a/xen/arch/arm/Makefile >>>> +++ b/xen/arch/arm/Makefile >>>> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o >>>> #obj-bin-y += ....o >>>> -ifdef CONFIG_DTB_FILE >>>> +ifneq ($(CONFIG_DTB_FILE),"") >>>> obj-y += dtb.o >>>> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >>>> endif >>>> ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS) >>>> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c >>>> xen.lds: xen.lds.S >>>> $(CPP) -P $(a_flags) -MQ $@ -o $@ $< >>>> -dtb.o: $(CONFIG_DTB_FILE) >>>> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE)) >>>> .PHONY: clean >>>> clean:: >>>> diff --git a/xen/common/Kconfig b/xen/common/Kconfig >>>> index eb953d171e..a27836bf47 100644 >>>> --- a/xen/common/Kconfig >>>> +++ b/xen/common/Kconfig >>>> @@ -400,6 +400,14 @@ config DOM0_MEM >>>> Leave empty if you are not sure what to specify. >>>> +config DTB_FILE >>>> + string "Absolute path to device tree blob" >>>> + depends on HAS_DEVICE_TREE >>>> + ---help--- >>>> + When using a bootloader that has no device tree support or when there >>>> + is no bootloader at all, use this option to specify the absolute path >>>> + to a device tree that will be linked directly inside Xen binary. >>> >>> With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge. >>> >>> So I think we need a second config to that indicates whether the string is empty or not. >>> >>> Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "". >>> >>> Cheers, >>> >> I do not agrree. We do not need another config. > > Did you test that Xen will still boot if the string is empty? > >> If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary. > > The dtb.o will not be created but the section will because the linker use #ifdef CONFIG_DTB_FILE: > > 42sh> grep CONFIG_DTB .config > CONFIG_DTB_FILE="" > 42sh> nm xen-syms | grep _sdtb > 00000000003560f8 B _sdtb > > And to show this is going to be used: > > 42sh> git diff > diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S > index 5d44667bd89d..2b680b8226d2 100644 > --- a/xen/arch/arm/arm64/head.S > +++ b/xen/arch/arm/arm64/head.S > @@ -297,6 +297,7 @@ real_start_efi: > > /* Using the DTB in the .dtb section? */ > #ifdef CONFIG_DTB_FILE > + e > load_paddr x21, _sdtb > #endif > > 42hs> make > [...] > CC arm64/head.o > arm64/head.S: Assembler messages: > arm64/head.S:300: Error: unknown mnemonic `e' -- `e' > /home/ANT.AMAZON.COM/jgrall/works/oss/xen/xen/Rules.mk:204: recipe for target 'arm64/head.o' failed > > So _sdtb is going to always be used... > > Cheers, > Yes you are right. So I could add another config like: config DTB_VALID def_bool y if DTB_FILE != "" and change all the lines containing: #ifdef CONFIG_DTB_FILE to #ifdef CONFIG_DTB_VALID What do u think? Michal ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-11 12:39 ` Michal Orzel @ 2021-03-11 13:10 ` Jan Beulich 2021-03-11 13:32 ` Julien Grall 0 siblings, 1 reply; 14+ messages in thread From: Jan Beulich @ 2021-03-11 13:10 UTC (permalink / raw) To: Michal Orzel Cc: Stefano Stabellini, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Ian Jackson, Wei Liu, bertrand.marquis, xen-devel, Julien Grall On 11.03.2021 13:39, Michal Orzel wrote: > On 11.03.2021 12:11, Julien Grall wrote: >> On 11/03/2021 10:41, Michal Orzel wrote: >>> On 11.03.2021 11:34, Julien Grall wrote: >>>> On 10/03/2021 06:58, Michal Orzel wrote: >>>>> Currently in order to link existing DTB into Xen image >>>>> we need to either specify option CONFIG_DTB_FILE on the >>>>> command line or manually add it into .config. >>>>> Add Kconfig entry: CONFIG_DTB_FILE to be able to >>>>> provide the path to DTB we want to embed into Xen image. >>>>> If no path provided - the dtb will not be embedded. >>>>> >>>>> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >>>>> as it is not needed since Kconfig will define it in a header >>>>> with all the other config options. >>>>> >>>>> Signed-off-by: Michal Orzel <michal.orzel@arm.com> >>>>> --- >>>>> xen/arch/arm/Makefile | 5 ++--- >>>>> xen/common/Kconfig | 8 ++++++++ >>>>> 2 files changed, 10 insertions(+), 3 deletions(-) >>>>> >>>>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile >>>>> index 16e6523e2c..46e6a95fec 100644 >>>>> --- a/xen/arch/arm/Makefile >>>>> +++ b/xen/arch/arm/Makefile >>>>> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o >>>>> #obj-bin-y += ....o >>>>> -ifdef CONFIG_DTB_FILE >>>>> +ifneq ($(CONFIG_DTB_FILE),"") >>>>> obj-y += dtb.o >>>>> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >>>>> endif >>>>> ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS) >>>>> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c >>>>> xen.lds: xen.lds.S >>>>> $(CPP) -P $(a_flags) -MQ $@ -o $@ $< >>>>> -dtb.o: $(CONFIG_DTB_FILE) >>>>> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE)) >>>>> .PHONY: clean >>>>> clean:: >>>>> diff --git a/xen/common/Kconfig b/xen/common/Kconfig >>>>> index eb953d171e..a27836bf47 100644 >>>>> --- a/xen/common/Kconfig >>>>> +++ b/xen/common/Kconfig >>>>> @@ -400,6 +400,14 @@ config DOM0_MEM >>>>> Leave empty if you are not sure what to specify. >>>>> +config DTB_FILE >>>>> + string "Absolute path to device tree blob" >>>>> + depends on HAS_DEVICE_TREE >>>>> + ---help--- >>>>> + When using a bootloader that has no device tree support or when there >>>>> + is no bootloader at all, use this option to specify the absolute path >>>>> + to a device tree that will be linked directly inside Xen binary. >>>> >>>> With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge. >>>> >>>> So I think we need a second config to that indicates whether the string is empty or not. >>>> >>>> Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "". >>>> >>>> Cheers, >>>> >>> I do not agrree. We do not need another config. >> >> Did you test that Xen will still boot if the string is empty? >> >>> If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary. >> >> The dtb.o will not be created but the section will because the linker use #ifdef CONFIG_DTB_FILE: >> >> 42sh> grep CONFIG_DTB .config >> CONFIG_DTB_FILE="" >> 42sh> nm xen-syms | grep _sdtb >> 00000000003560f8 B _sdtb >> >> And to show this is going to be used: >> >> 42sh> git diff >> diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S >> index 5d44667bd89d..2b680b8226d2 100644 >> --- a/xen/arch/arm/arm64/head.S >> +++ b/xen/arch/arm/arm64/head.S >> @@ -297,6 +297,7 @@ real_start_efi: >> >> /* Using the DTB in the .dtb section? */ >> #ifdef CONFIG_DTB_FILE >> + e >> load_paddr x21, _sdtb >> #endif >> >> 42hs> make >> [...] >> CC arm64/head.o >> arm64/head.S: Assembler messages: >> arm64/head.S:300: Error: unknown mnemonic `e' -- `e' >> /home/ANT.AMAZON.COM/jgrall/works/oss/xen/xen/Rules.mk:204: recipe for target 'arm64/head.o' failed >> >> So _sdtb is going to always be used... >> >> Cheers, >> > > Yes you are right. So I could add another config like: > config DTB_VALID > def_bool y if DTB_FILE != "" > and change all the lines containing: > #ifdef CONFIG_DTB_FILE > to > #ifdef CONFIG_DTB_VALID I'm sorry to jump in again, but I still think a 2nd Kconfig setting is not needed. I count three uses of CONFIG_DTB_VALID outside of make files. The ones in .S can be replaced by using assembler directives .ifeqs / .ifneqs. And the one in xen.lds.S looks to be unnecessary altogether: If there's no input .dtb section, the linker wouldn't allocate an output one anyway. And the _sdtb symbol, if you want to avoid its creation when there's no reference, could be wrapped in PROVIDE(). (I also think that symbol should be defined inside the section definition, not ahead of it.) Jan ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-11 13:10 ` Jan Beulich @ 2021-03-11 13:32 ` Julien Grall 2021-03-11 14:16 ` Michal Orzel 0 siblings, 1 reply; 14+ messages in thread From: Julien Grall @ 2021-03-11 13:32 UTC (permalink / raw) To: Jan Beulich, Michal Orzel Cc: Stefano Stabellini, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Ian Jackson, Wei Liu, bertrand.marquis, xen-devel Hi, On 11/03/2021 13:10, Jan Beulich wrote: > On 11.03.2021 13:39, Michal Orzel wrote: >> On 11.03.2021 12:11, Julien Grall wrote: >>> On 11/03/2021 10:41, Michal Orzel wrote: >>>> On 11.03.2021 11:34, Julien Grall wrote: >>>>> On 10/03/2021 06:58, Michal Orzel wrote: >>>>>> Currently in order to link existing DTB into Xen image >>>>>> we need to either specify option CONFIG_DTB_FILE on the >>>>>> command line or manually add it into .config. >>>>>> Add Kconfig entry: CONFIG_DTB_FILE to be able to >>>>>> provide the path to DTB we want to embed into Xen image. >>>>>> If no path provided - the dtb will not be embedded. >>>>>> >>>>>> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >>>>>> as it is not needed since Kconfig will define it in a header >>>>>> with all the other config options. >>>>>> >>>>>> Signed-off-by: Michal Orzel <michal.orzel@arm.com> >>>>>> --- >>>>>> xen/arch/arm/Makefile | 5 ++--- >>>>>> xen/common/Kconfig | 8 ++++++++ >>>>>> 2 files changed, 10 insertions(+), 3 deletions(-) >>>>>> >>>>>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile >>>>>> index 16e6523e2c..46e6a95fec 100644 >>>>>> --- a/xen/arch/arm/Makefile >>>>>> +++ b/xen/arch/arm/Makefile >>>>>> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o >>>>>> #obj-bin-y += ....o >>>>>> -ifdef CONFIG_DTB_FILE >>>>>> +ifneq ($(CONFIG_DTB_FILE),"") >>>>>> obj-y += dtb.o >>>>>> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >>>>>> endif >>>>>> ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS) >>>>>> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c >>>>>> xen.lds: xen.lds.S >>>>>> $(CPP) -P $(a_flags) -MQ $@ -o $@ $< >>>>>> -dtb.o: $(CONFIG_DTB_FILE) >>>>>> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE)) >>>>>> .PHONY: clean >>>>>> clean:: >>>>>> diff --git a/xen/common/Kconfig b/xen/common/Kconfig >>>>>> index eb953d171e..a27836bf47 100644 >>>>>> --- a/xen/common/Kconfig >>>>>> +++ b/xen/common/Kconfig >>>>>> @@ -400,6 +400,14 @@ config DOM0_MEM >>>>>> Leave empty if you are not sure what to specify. >>>>>> +config DTB_FILE >>>>>> + string "Absolute path to device tree blob" >>>>>> + depends on HAS_DEVICE_TREE >>>>>> + ---help--- >>>>>> + When using a bootloader that has no device tree support or when there >>>>>> + is no bootloader at all, use this option to specify the absolute path >>>>>> + to a device tree that will be linked directly inside Xen binary. >>>>> >>>>> With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge. >>>>> >>>>> So I think we need a second config to that indicates whether the string is empty or not. >>>>> >>>>> Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "". >>>>> >>>>> Cheers, >>>>> >>>> I do not agrree. We do not need another config. >>> >>> Did you test that Xen will still boot if the string is empty? >>> >>>> If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary. >>> >>> The dtb.o will not be created but the section will because the linker use #ifdef CONFIG_DTB_FILE: >>> >>> 42sh> grep CONFIG_DTB .config >>> CONFIG_DTB_FILE="" >>> 42sh> nm xen-syms | grep _sdtb >>> 00000000003560f8 B _sdtb >>> >>> And to show this is going to be used: >>> >>> 42sh> git diff >>> diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S >>> index 5d44667bd89d..2b680b8226d2 100644 >>> --- a/xen/arch/arm/arm64/head.S >>> +++ b/xen/arch/arm/arm64/head.S >>> @@ -297,6 +297,7 @@ real_start_efi: >>> >>> /* Using the DTB in the .dtb section? */ >>> #ifdef CONFIG_DTB_FILE >>> + e >>> load_paddr x21, _sdtb >>> #endif >>> >>> 42hs> make >>> [...] >>> CC arm64/head.o >>> arm64/head.S: Assembler messages: >>> arm64/head.S:300: Error: unknown mnemonic `e' -- `e' >>> /home/ANT.AMAZON.COM/jgrall/works/oss/xen/xen/Rules.mk:204: recipe for target 'arm64/head.o' failed >>> >>> So _sdtb is going to always be used... >>> >>> Cheers, >>> >> >> Yes you are right. So I could add another config like: >> config DTB_VALID >> def_bool y if DTB_FILE != "" >> and change all the lines containing: >> #ifdef CONFIG_DTB_FILE >> to >> #ifdef CONFIG_DTB_VALID > > I'm sorry to jump in again, but I still think a 2nd Kconfig setting > is not needed. I count three uses of CONFIG_DTB_VALID outside of > make files. The ones in .S can be replaced by using assembler > directives .ifeqs / .ifneqs. And the one in xen.lds.S looks to be > unnecessary altogether: If there's no input .dtb section, the > linker wouldn't allocate an output one anyway. And the _sdtb symbol, > if you want to avoid its creation when there's no reference, could > be wrapped in PROVIDE(). (I also think that symbol should be > defined inside the section definition, not ahead of it.) I don't particularly care of the approach used so long it doesn't break existing setup and doesn't end up to define _sdtb. Cheers, -- Julien Grall ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE 2021-03-11 13:32 ` Julien Grall @ 2021-03-11 14:16 ` Michal Orzel 0 siblings, 0 replies; 14+ messages in thread From: Michal Orzel @ 2021-03-11 14:16 UTC (permalink / raw) To: Julien Grall, Jan Beulich Cc: Stefano Stabellini, Volodymyr Babchuk, Andrew Cooper, George Dunlap, Ian Jackson, Wei Liu, bertrand.marquis, xen-devel On 11.03.2021 14:32, Julien Grall wrote: > Hi, > > On 11/03/2021 13:10, Jan Beulich wrote: >> On 11.03.2021 13:39, Michal Orzel wrote: >>> On 11.03.2021 12:11, Julien Grall wrote: >>>> On 11/03/2021 10:41, Michal Orzel wrote: >>>>> On 11.03.2021 11:34, Julien Grall wrote: >>>>>> On 10/03/2021 06:58, Michal Orzel wrote: >>>>>>> Currently in order to link existing DTB into Xen image >>>>>>> we need to either specify option CONFIG_DTB_FILE on the >>>>>>> command line or manually add it into .config. >>>>>>> Add Kconfig entry: CONFIG_DTB_FILE to be able to >>>>>>> provide the path to DTB we want to embed into Xen image. >>>>>>> If no path provided - the dtb will not be embedded. >>>>>>> >>>>>>> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >>>>>>> as it is not needed since Kconfig will define it in a header >>>>>>> with all the other config options. >>>>>>> >>>>>>> Signed-off-by: Michal Orzel <michal.orzel@arm.com> >>>>>>> --- >>>>>>> xen/arch/arm/Makefile | 5 ++--- >>>>>>> xen/common/Kconfig | 8 ++++++++ >>>>>>> 2 files changed, 10 insertions(+), 3 deletions(-) >>>>>>> >>>>>>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile >>>>>>> index 16e6523e2c..46e6a95fec 100644 >>>>>>> --- a/xen/arch/arm/Makefile >>>>>>> +++ b/xen/arch/arm/Makefile >>>>>>> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o >>>>>>> #obj-bin-y += ....o >>>>>>> -ifdef CONFIG_DTB_FILE >>>>>>> +ifneq ($(CONFIG_DTB_FILE),"") >>>>>>> obj-y += dtb.o >>>>>>> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\" >>>>>>> endif >>>>>>> ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS) >>>>>>> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c >>>>>>> xen.lds: xen.lds.S >>>>>>> $(CPP) -P $(a_flags) -MQ $@ -o $@ $< >>>>>>> -dtb.o: $(CONFIG_DTB_FILE) >>>>>>> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE)) >>>>>>> .PHONY: clean >>>>>>> clean:: >>>>>>> diff --git a/xen/common/Kconfig b/xen/common/Kconfig >>>>>>> index eb953d171e..a27836bf47 100644 >>>>>>> --- a/xen/common/Kconfig >>>>>>> +++ b/xen/common/Kconfig >>>>>>> @@ -400,6 +400,14 @@ config DOM0_MEM >>>>>>> Leave empty if you are not sure what to specify. >>>>>>> +config DTB_FILE >>>>>>> + string "Absolute path to device tree blob" >>>>>>> + depends on HAS_DEVICE_TREE >>>>>>> + ---help--- >>>>>>> + When using a bootloader that has no device tree support or when there >>>>>>> + is no bootloader at all, use this option to specify the absolute path >>>>>>> + to a device tree that will be linked directly inside Xen binary. >>>>>> >>>>>> With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge. >>>>>> >>>>>> So I think we need a second config to that indicates whether the string is empty or not. >>>>>> >>>>>> Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "". >>>>>> >>>>>> Cheers, >>>>>> >>>>> I do not agrree. We do not need another config. >>>> >>>> Did you test that Xen will still boot if the string is empty? >>>> >>>>> If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary. >>>> >>>> The dtb.o will not be created but the section will because the linker use #ifdef CONFIG_DTB_FILE: >>>> >>>> 42sh> grep CONFIG_DTB .config >>>> CONFIG_DTB_FILE="" >>>> 42sh> nm xen-syms | grep _sdtb >>>> 00000000003560f8 B _sdtb >>>> >>>> And to show this is going to be used: >>>> >>>> 42sh> git diff >>>> diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S >>>> index 5d44667bd89d..2b680b8226d2 100644 >>>> --- a/xen/arch/arm/arm64/head.S >>>> +++ b/xen/arch/arm/arm64/head.S >>>> @@ -297,6 +297,7 @@ real_start_efi: >>>> >>>> /* Using the DTB in the .dtb section? */ >>>> #ifdef CONFIG_DTB_FILE >>>> + e >>>> load_paddr x21, _sdtb >>>> #endif >>>> >>>> 42hs> make >>>> [...] >>>> CC arm64/head.o >>>> arm64/head.S: Assembler messages: >>>> arm64/head.S:300: Error: unknown mnemonic `e' -- `e' >>>> /home/ANT.AMAZON.COM/jgrall/works/oss/xen/xen/Rules.mk:204: recipe for target 'arm64/head.o' failed >>>> >>>> So _sdtb is going to always be used... >>>> >>>> Cheers, >>>> >>> >>> Yes you are right. So I could add another config like: >>> config DTB_VALID >>> def_bool y if DTB_FILE != "" >>> and change all the lines containing: >>> #ifdef CONFIG_DTB_FILE >>> to >>> #ifdef CONFIG_DTB_VALID >> >> I'm sorry to jump in again, but I still think a 2nd Kconfig setting >> is not needed. I count three uses of CONFIG_DTB_VALID outside of >> make files. The ones in .S can be replaced by using assembler >> directives .ifeqs / .ifneqs. And the one in xen.lds.S looks to be >> unnecessary altogether: If there's no input .dtb section, the >> linker wouldn't allocate an output one anyway. And the _sdtb symbol, >> if you want to avoid its creation when there's no reference, could >> be wrapped in PROVIDE(). (I also think that symbol should be >> defined inside the section definition, not ahead of it.) > > I don't particularly care of the approach used so long it doesn't break existing setup and doesn't end up to define _sdtb. > > Cheers, > I will send v5. ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2021-03-11 14:17 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-03-10 6:58 [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE Michal Orzel 2021-03-10 8:05 ` Bertrand Marquis 2021-03-10 9:00 ` Jan Beulich 2021-03-10 11:33 ` Ian Jackson 2021-03-10 11:40 ` Julien Grall 2021-03-10 13:36 ` Ian Jackson 2021-03-11 9:17 ` Michal Orzel 2021-03-11 10:34 ` Julien Grall 2021-03-11 10:41 ` Michal Orzel 2021-03-11 11:11 ` Julien Grall 2021-03-11 12:39 ` Michal Orzel 2021-03-11 13:10 ` Jan Beulich 2021-03-11 13:32 ` Julien Grall 2021-03-11 14:16 ` Michal Orzel
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.