* unpacking error
@ 2019-10-28 0:11 lyle.ziegelmiller
2019-10-28 10:14 ` Philip Oakley
0 siblings, 1 reply; 6+ messages in thread
From: lyle.ziegelmiller @ 2019-10-28 0:11 UTC (permalink / raw)
To: 'git bug report'
Hi
I almost always get this error when pushing from my PC to the bare
repository on my laptop. I'm running Cygwin on Windows 10. I've tried
everything! chmod -R 777, chown -R <my user id>, etc.
A few more details: I have a Git repository on my PC, and from that, I've
cloned a bare repository on my laptop, which I then used to clone a regular
repository on my laptop. The error occurs when I attempt to push changes on
my PC into the bare repository on my laptop.
If I delete the old bare repository on my laptop, I'm able to create a new
bare repository on my laptop from my pc, but then as soon as I try to push
to it, I get this error again. I've tried disabling the anti-virus, etc.
I've spent hours Googling solutions. Nothing works! Many others have had
this same issue. I never had this type of problem with SVN.
It would be nice if Git would say what's failing when this happens, and it
would be nice to get this bug fixed. It happens with all my git
repositories. I don't think it's a network issue or I wouldn't be able to
create a new repository on my laptop from my PC, as that would encounter the
same permissions issues.
The two machines are connected with an ethernet cable. I've done everything
I can to make sure all the Windows permissions are set correctly, etc.
$ git push
Counting objects: 3, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (3/3), done.
Writing objects: 100% (3/3), 331 bytes | 331.00 KiB/s, done.
Total 3 (delta 2), reused 0 (delta 0)
remote: fatal: not a git repository: '.'
error: remote unpack failed: unpack-objects abnormal exit To
//lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-repositor
y.git/
! [remote rejected] timestamp_testing -> timestamp_testing (unpacker error)
error: failed to push some refs to
'//lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-reposito
ry.git/'
$ git --version
git version 2.17.0
------------------
System Information
------------------
Time of this report: 10/27/2019, 16:53:09
Machine name: LJZ-DELLPC
Machine Id: {39BC0826-743F-4ECA-AFBE-66A14FBE533C}
Operating System: Windows 10 Pro 64-bit (10.0, Build 17134)
(17134.rs4_release.180410-1804)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Inspiron 3650
BIOS: BIOS Date: 06/17/16 21:14:07 Ver: 05.0000B (type:
BIOS)
Processor: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (4 CPUs),
~2.7GHz
Memory: 8192MB RAM
Available OS Memory: 8096MB RAM
Page File: 8076MB used, 7243MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Available, with HDCP Microsoft Graphics Hybrid:
Not Supported
DxDiag Version: 10.00.17134.0001 64bit Unicode
Regards,
Lyle Ziegelmiller
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: unpacking error
2019-10-28 0:11 unpacking error lyle.ziegelmiller
@ 2019-10-28 10:14 ` Philip Oakley
2019-10-29 4:47 ` lyle.ziegelmiller
0 siblings, 1 reply; 6+ messages in thread
From: Philip Oakley @ 2019-10-28 10:14 UTC (permalink / raw)
To: lyle.ziegelmiller, 'git bug report'
On 28/10/2019 00:11, lyle.ziegelmiller@gmail.com wrote:
> Hi
>
> I almost always get this error when pushing from my PC to the bare
> repository on my laptop. I'm running Cygwin on Windows 10. I've tried
> everything! chmod -R 777, chown -R <my user id>, etc.
>
> A few more details: I have a Git repository on my PC, and from that, I've
> cloned a bare repository on my laptop,
How did you clone that bare repository? In particular, how did you
provide the path to that repo.
If I understand correctly it must be in a URL format (e.g. file://) to
ensure that you get distinct repos, rather than two interrelated repos
(thought the docs discuss the issue as being the transport mechanism).
The same issue probably applies to the subsequent clones of the bare repo.
Perhaps focus on the error message and decide if "." is the correct way
of thinking about the path.
> which I then used to clone a regular
> repository on my laptop. The error occurs when I attempt to push changes on
> my PC into the bare repository on my laptop.
>
> If I delete the old bare repository on my laptop, I'm able to create a new
> bare repository on my laptop from my pc, but then as soon as I try to push
> to it, I get this error again. I've tried disabling the anti-virus, etc.
> I've spent hours Googling solutions. Nothing works! Many others have had
> this same issue. I never had this type of problem with SVN.
>
> It would be nice if Git would say what's failing when this happens, and it
> would be nice to get this bug fixed. It happens with all my git
> repositories. I don't think it's a network issue or I wouldn't be able to
> create a new repository on my laptop from my PC, as that would encounter the
> same permissions issues.
>
> The two machines are connected with an ethernet cable. I've done everything
> I can to make sure all the Windows permissions are set correctly, etc.
>
> $ git push
> Counting objects: 3, done.
> Delta compression using up to 4 threads.
> Compressing objects: 100% (3/3), done.
> Writing objects: 100% (3/3), 331 bytes | 331.00 KiB/s, done.
> Total 3 (delta 2), reused 0 (delta 0)
> remote: fatal: not a git repository: '.'
Why is the remote end of the connection reporting the error that it is
looking at "." (as opposed to a proper path/repo)?
I could easily be wrong - I haven't double checked the man pages at all,
but thought a comment may help your research.
> error: remote unpack failed: unpack-objects abnormal exit To
> //lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-repositor
> y.git/
> ! [remote rejected] timestamp_testing -> timestamp_testing (unpacker error)
> error: failed to push some refs to
> '//lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-reposito
> ry.git/'
>
>
> $ git --version
> git version 2.17.0
>
> ------------------
> System Information
> ------------------
> Time of this report: 10/27/2019, 16:53:09
> Machine name: LJZ-DELLPC
> Machine Id: {39BC0826-743F-4ECA-AFBE-66A14FBE533C}
> Operating System: Windows 10 Pro 64-bit (10.0, Build 17134)
> (17134.rs4_release.180410-1804)
> Language: English (Regional Setting: English)
> System Manufacturer: Dell Inc.
> System Model: Inspiron 3650
> BIOS: BIOS Date: 06/17/16 21:14:07 Ver: 05.0000B (type:
> BIOS)
> Processor: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (4 CPUs),
> ~2.7GHz
> Memory: 8192MB RAM
> Available OS Memory: 8096MB RAM
> Page File: 8076MB used, 7243MB available
> Windows Dir: C:\WINDOWS
> DirectX Version: DirectX 12
> DX Setup Parameters: Not found
> User DPI Setting: 96 DPI (100 percent)
> System DPI Setting: 96 DPI (100 percent)
> DWM DPI Scaling: Disabled
> Miracast: Available, with HDCP Microsoft Graphics Hybrid:
> Not Supported
> DxDiag Version: 10.00.17134.0001 64bit Unicode
>
>
> Regards,
>
> Lyle Ziegelmiller
>
>
--
Philip
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: unpacking error
2019-10-28 10:14 ` Philip Oakley
@ 2019-10-29 4:47 ` lyle.ziegelmiller
[not found] ` <001a01d5a256$5e64d010$1b2e7030$@gmail.com>
0 siblings, 1 reply; 6+ messages in thread
From: lyle.ziegelmiller @ 2019-10-29 4:47 UTC (permalink / raw)
To: 'Philip Oakley', 'git bug report'
From: Philip Oakley <philipoakley@iee.email>
Sent: Monday, October 28, 2019 3:14 AM
To: lyle.ziegelmiller@gmail.com; 'git bug report' <git@vger.kernel.org>
Subject: Re: unpacking error
Hi Philip.
Thanks for writing back. Please see below.
Regards
Lyle
On 28/10/2019 00:11, lyle.ziegelmiller@gmail.com wrote:
> Hi
>
> I almost always get this error when pushing from my PC to the bare
> repository on my laptop. I'm running Cygwin on Windows 10. I've tried
> everything! chmod -R 777, chown -R <my user id>, etc.
>
> A few more details: I have a Git repository on my PC, and from that,
> I've cloned a bare repository on my laptop,
[Philip] "How did you clone that bare repository? In particular, how did you provide the path to that repo."
I'm recreating the entire process below with a smaller repository on my PC (so it won't take hours to clone, etc):
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git clone --bare . //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
Cloning into bare repository '//lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git'...
done.
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ echo "line1" > afile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git add afile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git commit -m 'Added afile.txt'
[master 7fa616b] Added afile.txt
1 file changed, 1 insertion(+)
create mode 100644 afile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git push
Counting objects: 3, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 287 bytes | 287.00 KiB/s, done.
Total 3 (delta 1), reused 0 (delta 0)
remote: fatal: not a git repository: '.'
error: remote unpack failed: unpack-objects abnormal exit
To //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
! [remote rejected] master -> master (unpacker error)
error: failed to push some refs to '//lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git'
Note: I'm able to access the remote repository using Cygwin Unix commands on Windows 10:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ ls //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
config description HEAD hooks info objects packed-refs refs
... and I do have write permission:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ touch //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git/anotherFile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ echo "line2" >> //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git/anotherFile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git remote -v
origin //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git (fetch)
origin //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git (push)
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$
So, I can clone the repository, and I can still write to the remote directory using the "touch" and "echo" commands. But I can't push to it. It seems that "clone" can access (create, actually) the remote repository, but "push" cannot access it effectively.
[Philip] "If I understand correctly it must be in a URL format (e.g. file://) to ensure that you get distinct repos, rather than two interrelated repos (thought the docs discuss the issue as being the transport mechanism)."
"file://" is for referring to a local file from within a web browser. "//" is how to begin a path of a file on a remote machine in Windows.
After doing all of this, I created another test file on my laptop (filename: afile2.txt) in the repository on my laptop made by cloning the bare repository that I just created on my laptop, and added the test file afile2.txt to the cloned non-bare git repository, and then did a "git push" on my laptop (the remote machine) to the bare repository on my laptop (the remote machine). Then, back on my PC, I was able to do a git pull even though earlier I could not do a git push:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git pull
remote: Counting objects: 3, done.
remote: Compressing objects: 100% (2/2), done.
remote: Total 3 (delta 1), reused 0 (delta 0)
Unpacking objects: 100% (3/3), done.
From //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository
+ e9d5a3c...cd21f1d master -> origin/master (forced update)
Merge made by the 'recursive' strategy.
afile2.txt | 1 +
1 file changed, 1 insertion(+)
create mode 100644 afile2.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ ls
afile.txt afile2.txt backup Budget.xlsx Joanne Scotland.xlsx
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
And there it is, the new file (afile2.txt).
So Git is able to utilize the remote bare repository for cloning on the remote machine, and on the local machine (my PC) it can pull from the remote bare repository, but it can't push to it.
[Philip] "The same issue probably applies to the subsequent clones of the bare repo."
[Philip] "Perhaps focus on the error message and decide if "." is the correct way of thinking about the path."
"." is the local directory on my PC that was initially cloned. It is where the Git repository reside:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ ls -a
. .. .git afile.txt afile2.txt backup Budget.xlsx Joanne Scotland.xlsx
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> which I then used to clone a regular repository on my laptop. The
> error occurs when I attempt to push changes on my PC into the bare
> repository on my laptop.
>
> If I delete the old bare repository on my laptop, I'm able to create a
> new bare repository on my laptop from my pc, but then as soon as I try
> to push to it, I get this error again. I've tried disabling the anti-virus, etc.
> I've spent hours Googling solutions. Nothing works! Many others have
> had this same issue. I never had this type of problem with SVN.
>
> It would be nice if Git would say what's failing when this happens,
> and it would be nice to get this bug fixed. It happens with all my git
> repositories. I don't think it's a network issue or I wouldn't be able
> to create a new repository on my laptop from my PC, as that would
> encounter the same permissions issues.
>
> The two machines are connected with an ethernet cable. I've done
> everything I can to make sure all the Windows permissions are set correctly, etc.
>
> $ git push
> Counting objects: 3, done.
> Delta compression using up to 4 threads.
> Compressing objects: 100% (3/3), done.
> Writing objects: 100% (3/3), 331 bytes | 331.00 KiB/s, done.
> Total 3 (delta 2), reused 0 (delta 0)
> remote: fatal: not a git repository: '.'
[Philip] "Why is the remote end of the connection reporting the error that it is looking at "." (as opposed to a proper path/repo)?"
I'm not sure. I cloned ".". I think that's a legitimate thing to do.
All this stuff has worked for me for years. I'm not sure why it's stopped working.
[Philip] "I could easily be wrong - I haven't double checked the man pages at all, but thought a comment may help your research."
> error: remote unpack failed: unpack-objects abnormal exit To
> //lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-rep
> ositor
> y.git/
> ! [remote rejected] timestamp_testing -> timestamp_testing (unpacker
> error)
> error: failed to push some refs to
> '//lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-re
> posito
> ry.git/'
>
>
> $ git --version
> git version 2.17.0
>
> ------------------
> System Information
> ------------------
> Time of this report: 10/27/2019, 16:53:09
> Machine name: LJZ-DELLPC
> Machine Id: {39BC0826-743F-4ECA-AFBE-66A14FBE533C}
> Operating System: Windows 10 Pro 64-bit (10.0, Build 17134)
> (17134.rs4_release.180410-1804)
> Language: English (Regional Setting: English)
> System Manufacturer: Dell Inc.
> System Model: Inspiron 3650
> BIOS: BIOS Date: 06/17/16 21:14:07 Ver: 05.0000B (type:
> BIOS)
> Processor: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (4
> CPUs), ~2.7GHz
> Memory: 8192MB RAM
> Available OS Memory: 8096MB RAM
> Page File: 8076MB used, 7243MB available
> Windows Dir: C:\WINDOWS
> DirectX Version: DirectX 12
> DX Setup Parameters: Not found
> User DPI Setting: 96 DPI (100 percent)
> System DPI Setting: 96 DPI (100 percent)
> DWM DPI Scaling: Disabled
> Miracast: Available, with HDCP Microsoft Graphics Hybrid:
> Not Supported
> DxDiag Version: 10.00.17134.0001 64bit Unicode
>
>
> Regards,
>
> Lyle Ziegelmiller
>
>
--
Philip
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: FW: unpacking error
[not found] ` <001a01d5a256$5e64d010$1b2e7030$@gmail.com>
@ 2019-11-24 14:53 ` Philip Oakley
2019-12-25 18:49 ` lyle.ziegelmiller
1 sibling, 0 replies; 6+ messages in thread
From: Philip Oakley @ 2019-11-24 14:53 UTC (permalink / raw)
To: lyle.ziegelmiller, Git List
On 23/11/2019 23:33, lyle.ziegelmiller@gmail.com wrote:
> Hi Philip
>
> Any updates on this?
I haven't seen anything on list
(https://public-inbox.org/git/005501d58e14$07504990$15f0dcb0$@gmail.com/)
and haven;'t looked any further myself.
cc'ing the list.
Have you managed any more investigation?
Or tried upgrading to the latest release v2.24.x (which may provide
updated error messages)?
Have a careful review of error messages and see if you can correlate at
least some of them with information you can find in your setup.
e.g. the first part of the error stream is "remote: fatal: not a git
repository: '.' "
This means the remote system is sending you a message that it is looking
at '.' and hoping that it is a repository, but it isn't. So why is it
looking (within the remote) at '.' - is that path something you sent?,
it is a misconfiguration at the remote?, etc.
This may also be a bad interaction between cygwin and your Git (is it
Git for Windows, or ..).
Philip
>
> Thanks
>
> Lyle
>
> -----Original Message-----
> From: lyle.ziegelmiller@gmail.com <lyle.ziegelmiller@gmail.com>
> Sent: Monday, October 28, 2019 9:48 PM
> To: 'Philip Oakley' <philipoakley@iee.email>; 'git bug report' <git@vger.kernel.org>
> Subject: RE: unpacking error
>
>
> From: Philip Oakley <philipoakley@iee.email>
> Sent: Monday, October 28, 2019 3:14 AM
> To: lyle.ziegelmiller@gmail.com; 'git bug report' <git@vger.kernel.org>
> Subject: Re: unpacking error
>
> Hi Philip.
>
> Thanks for writing back. Please see below.
>
> Regards
>
> Lyle
>
> On 28/10/2019 00:11, lyle.ziegelmiller@gmail.com wrote:
>> Hi
>>
>> I almost always get this error when pushing from my PC to the bare
>> repository on my laptop. I'm running Cygwin on Windows 10. I've tried
>> everything! chmod -R 777, chown -R <my user id>, etc.
>>
>> A few more details: I have a Git repository on my PC, and from that,
>> I've cloned a bare repository on my laptop,
> [Philip] "How did you clone that bare repository? In particular, how did you provide the path to that repo."
>
> I'm recreating the entire process below with a smaller repository on my PC (so it won't take hours to clone, etc):
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ git clone --bare . //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
> Cloning into bare repository '//lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git'...
> done.
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ echo "line1" > afile.txt
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ git add afile.txt
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ git commit -m 'Added afile.txt'
> [master 7fa616b] Added afile.txt
> 1 file changed, 1 insertion(+)
> create mode 100644 afile.txt
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ git push
> Counting objects: 3, done.
> Delta compression using up to 4 threads.
> Compressing objects: 100% (2/2), done.
> Writing objects: 100% (3/3), 287 bytes | 287.00 KiB/s, done.
> Total 3 (delta 1), reused 0 (delta 0)
> remote: fatal: not a git repository: '.'
> error: remote unpack failed: unpack-objects abnormal exit To //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
> ! [remote rejected] master -> master (unpacker error)
> error: failed to push some refs to '//lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git'
>
> Note: I'm able to access the remote repository using Cygwin Unix commands on Windows 10:
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ ls //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
> config description HEAD hooks info objects packed-refs refs
>
> ... and I do have write permission:
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ touch //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git/anotherFile.txt
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ echo "line2" >> //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git/anotherFile.txt
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ git remote -v
> origin //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git (fetch) origin //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git (push)
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $
>
> So, I can clone the repository, and I can still write to the remote directory using the "touch" and "echo" commands. But I can't push to it. It seems that "clone" can access (create, actually) the remote repository, but "push" cannot access it effectively.
>
> [Philip] "If I understand correctly it must be in a URL format (e.g. file://) to ensure that you get distinct repos, rather than two interrelated repos (thought the docs discuss the issue as being the transport mechanism)."
>
> "file://" is for referring to a local file from within a web browser. "//" is how to begin a path of a file on a remote machine in Windows.
>
> After doing all of this, I created another test file on my laptop (filename: afile2.txt) in the repository on my laptop made by cloning the bare repository that I just created on my laptop, and added the test file afile2.txt to the cloned non-bare git repository, and then did a "git push" on my laptop (the remote machine) to the bare repository on my laptop (the remote machine). Then, back on my PC, I was able to do a git pull even though earlier I could not do a git push:
>
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ git pull
> remote: Counting objects: 3, done.
> remote: Compressing objects: 100% (2/2), done.
> remote: Total 3 (delta 1), reused 0 (delta 0) Unpacking objects: 100% (3/3), done.
> From //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository
> + e9d5a3c...cd21f1d master -> origin/master (forced update)
> Merge made by the 'recursive' strategy.
> afile2.txt | 1 +
> 1 file changed, 1 insertion(+)
> create mode 100644 afile2.txt
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ ls
> afile.txt afile2.txt backup Budget.xlsx Joanne Scotland.xlsx
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
>
>
> And there it is, the new file (afile2.txt).
>
> So Git is able to utilize the remote bare repository for cloning on the remote machine, and on the local machine (my PC) it can pull from the remote bare repository, but it can't push to it.
>
> [Philip] "The same issue probably applies to the subsequent clones of the bare repo."
>
> [Philip] "Perhaps focus on the error message and decide if "." is the correct way of thinking about the path."
>
> "." is the local directory on my PC that was initially cloned. It is where the Git repository reside:
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> $ ls -a
> . .. .git afile.txt afile2.txt backup Budget.xlsx Joanne Scotland.xlsx
>
> lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
>
>> which I then used to clone a regular repository on my laptop. The
>> error occurs when I attempt to push changes on my PC into the bare
>> repository on my laptop.
>>
>> If I delete the old bare repository on my laptop, I'm able to create a
>> new bare repository on my laptop from my pc, but then as soon as I try
>> to push to it, I get this error again. I've tried disabling the anti-virus, etc.
>> I've spent hours Googling solutions. Nothing works! Many others have
>> had this same issue. I never had this type of problem with SVN.
>>
>> It would be nice if Git would say what's failing when this happens,
>> and it would be nice to get this bug fixed. It happens with all my git
>> repositories. I don't think it's a network issue or I wouldn't be able
>> to create a new repository on my laptop from my PC, as that would
>> encounter the same permissions issues.
>>
>> The two machines are connected with an ethernet cable. I've done
>> everything I can to make sure all the Windows permissions are set correctly, etc.
>>
>> $ git push
>> Counting objects: 3, done.
>> Delta compression using up to 4 threads.
>> Compressing objects: 100% (3/3), done.
>> Writing objects: 100% (3/3), 331 bytes | 331.00 KiB/s, done.
>> Total 3 (delta 2), reused 0 (delta 0)
>> remote: fatal: not a git repository: '.'
> [Philip] "Why is the remote end of the connection reporting the error that it is looking at "." (as opposed to a proper path/repo)?"
>
> I'm not sure. I cloned ".". I think that's a legitimate thing to do.
>
> All this stuff has worked for me for years. I'm not sure why it's stopped working.
>
> [Philip] "I could easily be wrong - I haven't double checked the man pages at all, but thought a comment may help your research."
>> error: remote unpack failed: unpack-objects abnormal exit To
>> //lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-rep
>> ositor
>> y.git/
>> ! [remote rejected] timestamp_testing -> timestamp_testing (unpacker
>> error)
>> error: failed to push some refs to
>> '//lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-re
>> posito
>> ry.git/'
>>
>>
>> $ git --version
>> git version 2.17.0
>>
>> ------------------
>> System Information
>> ------------------
>> Time of this report: 10/27/2019, 16:53:09
>> Machine name: LJZ-DELLPC
>> Machine Id: {39BC0826-743F-4ECA-AFBE-66A14FBE533C}
>> Operating System: Windows 10 Pro 64-bit (10.0, Build 17134)
>> (17134.rs4_release.180410-1804)
>> Language: English (Regional Setting: English)
>> System Manufacturer: Dell Inc.
>> System Model: Inspiron 3650
>> BIOS: BIOS Date: 06/17/16 21:14:07 Ver: 05.0000B (type:
>> BIOS)
>> Processor: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (4
>> CPUs), ~2.7GHz
>> Memory: 8192MB RAM
>> Available OS Memory: 8096MB RAM
>> Page File: 8076MB used, 7243MB available
>> Windows Dir: C:\WINDOWS
>> DirectX Version: DirectX 12
>> DX Setup Parameters: Not found
>> User DPI Setting: 96 DPI (100 percent)
>> System DPI Setting: 96 DPI (100 percent)
>> DWM DPI Scaling: Disabled
>> Miracast: Available, with HDCP Microsoft Graphics Hybrid:
>> Not Supported
>> DxDiag Version: 10.00.17134.0001 64bit Unicode
>>
>>
>> Regards,
>>
>> Lyle Ziegelmiller
>>
>>
> --
> Philip
>
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* FW: unpacking error
[not found] ` <001a01d5a256$5e64d010$1b2e7030$@gmail.com>
2019-11-24 14:53 ` FW: " Philip Oakley
@ 2019-12-25 18:49 ` lyle.ziegelmiller
[not found] ` <4C0A4F83-DD45-455F-B086-3416F86C1CCE@iee.email>
1 sibling, 1 reply; 6+ messages in thread
From: lyle.ziegelmiller @ 2019-12-25 18:49 UTC (permalink / raw)
To: git
Hi
It seems Philip is no longer receiving emails?
Please see below.
Regards
Lyle
-----Original Message-----
From: lyle.ziegelmiller@gmail.com <lyle.ziegelmiller@gmail.com>
Sent: Saturday, November 23, 2019 4:33 PM
To: philipoakley@iee.email
Subject: FW: unpacking error
Hi Philip
Any updates on this?
Thanks
Lyle
-----Original Message-----
From: lyle.ziegelmiller@gmail.com <lyle.ziegelmiller@gmail.com>
Sent: Monday, October 28, 2019 9:48 PM
To: 'Philip Oakley' <philipoakley@iee.email>; 'git bug report' <git@vger.kernel.org>
Subject: RE: unpacking error
From: Philip Oakley <philipoakley@iee.email>
Sent: Monday, October 28, 2019 3:14 AM
To: lyle.ziegelmiller@gmail.com; 'git bug report' <git@vger.kernel.org>
Subject: Re: unpacking error
Hi Philip.
Thanks for writing back. Please see below.
Regards
Lyle
On 28/10/2019 00:11, lyle.ziegelmiller@gmail.com wrote:
> Hi
>
> I almost always get this error when pushing from my PC to the bare
> repository on my laptop. I'm running Cygwin on Windows 10. I've tried
> everything! chmod -R 777, chown -R <my user id>, etc.
>
> A few more details: I have a Git repository on my PC, and from that,
> I've cloned a bare repository on my laptop,
[Philip] "How did you clone that bare repository? In particular, how did you provide the path to that repo."
I'm recreating the entire process below with a smaller repository on my PC (so it won't take hours to clone, etc):
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git clone --bare . //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
Cloning into bare repository '//lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git'...
done.
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ echo "line1" > afile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git add afile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git commit -m 'Added afile.txt'
[master 7fa616b] Added afile.txt
1 file changed, 1 insertion(+)
create mode 100644 afile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git push
Counting objects: 3, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 287 bytes | 287.00 KiB/s, done.
Total 3 (delta 1), reused 0 (delta 0)
remote: fatal: not a git repository: '.'
error: remote unpack failed: unpack-objects abnormal exit To //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
! [remote rejected] master -> master (unpacker error)
error: failed to push some refs to '//lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git'
Note: I'm able to access the remote repository using Cygwin Unix commands on Windows 10:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ ls //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
config description HEAD hooks info objects packed-refs refs
... and I do have write permission:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ touch //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git/anotherFile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ echo "line2" >> //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git/anotherFile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git remote -v
origin //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git (fetch) origin //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git (push)
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$
So, I can clone the repository, and I can still write to the remote directory using the "touch" and "echo" commands. But I can't push to it. It seems that "clone" can access (create, actually) the remote repository, but "push" cannot access it effectively.
[Philip] "If I understand correctly it must be in a URL format (e.g. file://) to ensure that you get distinct repos, rather than two interrelated repos (thought the docs discuss the issue as being the transport mechanism)."
"file://" is for referring to a local file from within a web browser. "//" is how to begin a path of a file on a remote machine in Windows.
After doing all of this, I created another test file on my laptop (filename: afile2.txt) in the repository on my laptop made by cloning the bare repository that I just created on my laptop, and added the test file afile2.txt to the cloned non-bare git repository, and then did a "git push" on my laptop (the remote machine) to the bare repository on my laptop (the remote machine). Then, back on my PC, I was able to do a git pull even though earlier I could not do a git push:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git pull
remote: Counting objects: 3, done.
remote: Compressing objects: 100% (2/2), done.
remote: Total 3 (delta 1), reused 0 (delta 0) Unpacking objects: 100% (3/3), done.
From //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository
+ e9d5a3c...cd21f1d master -> origin/master (forced update)
Merge made by the 'recursive' strategy.
afile2.txt | 1 +
1 file changed, 1 insertion(+)
create mode 100644 afile2.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ ls
afile.txt afile2.txt backup Budget.xlsx Joanne Scotland.xlsx
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
And there it is, the new file (afile2.txt).
So Git is able to utilize the remote bare repository for cloning on the remote machine, and on the local machine (my PC) it can pull from the remote bare repository, but it can't push to it.
[Philip] "The same issue probably applies to the subsequent clones of the bare repo."
[Philip] "Perhaps focus on the error message and decide if "." is the correct way of thinking about the path."
"." is the local directory on my PC that was initially cloned. It is where the Git repository reside:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ ls -a
. .. .git afile.txt afile2.txt backup Budget.xlsx Joanne Scotland.xlsx
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
> which I then used to clone a regular repository on my laptop. The
> error occurs when I attempt to push changes on my PC into the bare
> repository on my laptop.
>
> If I delete the old bare repository on my laptop, I'm able to create a
> new bare repository on my laptop from my pc, but then as soon as I try
> to push to it, I get this error again. I've tried disabling the anti-virus, etc.
> I've spent hours Googling solutions. Nothing works! Many others have
> had this same issue. I never had this type of problem with SVN.
>
> It would be nice if Git would say what's failing when this happens,
> and it would be nice to get this bug fixed. It happens with all my git
> repositories. I don't think it's a network issue or I wouldn't be able
> to create a new repository on my laptop from my PC, as that would
> encounter the same permissions issues.
>
> The two machines are connected with an ethernet cable. I've done
> everything I can to make sure all the Windows permissions are set correctly, etc.
>
> $ git push
> Counting objects: 3, done.
> Delta compression using up to 4 threads.
> Compressing objects: 100% (3/3), done.
> Writing objects: 100% (3/3), 331 bytes | 331.00 KiB/s, done.
> Total 3 (delta 2), reused 0 (delta 0)
> remote: fatal: not a git repository: '.'
[Philip] "Why is the remote end of the connection reporting the error that it is looking at "." (as opposed to a proper path/repo)?"
I'm not sure. I cloned ".". I think that's a legitimate thing to do.
All this stuff has worked for me for years. I'm not sure why it's stopped working.
[Philip] "I could easily be wrong - I haven't double checked the man pages at all, but thought a comment may help your research."
> error: remote unpack failed: unpack-objects abnormal exit To
> //lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-rep
> ositor
> y.git/
> ! [remote rejected] timestamp_testing -> timestamp_testing (unpacker
> error)
> error: failed to push some refs to
> '//lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-re
> posito
> ry.git/'
>
>
> $ git --version
> git version 2.17.0
>
> ------------------
> System Information
> ------------------
> Time of this report: 10/27/2019, 16:53:09
> Machine name: LJZ-DELLPC
> Machine Id: {39BC0826-743F-4ECA-AFBE-66A14FBE533C}
> Operating System: Windows 10 Pro 64-bit (10.0, Build 17134)
> (17134.rs4_release.180410-1804)
> Language: English (Regional Setting: English)
> System Manufacturer: Dell Inc.
> System Model: Inspiron 3650
> BIOS: BIOS Date: 06/17/16 21:14:07 Ver: 05.0000B (type:
> BIOS)
> Processor: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (4
> CPUs), ~2.7GHz
> Memory: 8192MB RAM
> Available OS Memory: 8096MB RAM
> Page File: 8076MB used, 7243MB available
> Windows Dir: C:\WINDOWS
> DirectX Version: DirectX 12
> DX Setup Parameters: Not found
> User DPI Setting: 96 DPI (100 percent)
> System DPI Setting: 96 DPI (100 percent)
> DWM DPI Scaling: Disabled
> Miracast: Available, with HDCP Microsoft Graphics Hybrid:
> Not Supported
> DxDiag Version: 10.00.17134.0001 64bit Unicode
>
>
> Regards,
>
> Lyle Ziegelmiller
>
>
--
Philip
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: FW: unpacking error
[not found] ` <4C0A4F83-DD45-455F-B086-3416F86C1CCE@iee.email>
@ 2020-01-18 18:07 ` lyle.ziegelmiller
0 siblings, 0 replies; 6+ messages in thread
From: lyle.ziegelmiller @ 2020-01-18 18:07 UTC (permalink / raw)
To: 'Philip Oakley', git
Hi Philip
Per your request, here's a reminder (albeit a bit late) after January 4th. Please see below.
Regards
Lyle
From: Philip Oakley <philipoakley@iee.email>
Sent: Wednesday, December 25, 2019 1:41 PM
To: lyle.ziegelmiller@gmail.com; git@vger.kernel.org
Subject: Re: FW: unpacking error
Hi,
must have missed that one. I'm away for Christmas and New year, so a reminder about 4th January may help, or maybe other contributors may have ideas.
On 25 December 2019 18:49:59 GMT+00:00, mailto:lyle.ziegelmiller@gmail.com wrote:
Hi
It seems Philip is no longer receiving emails?
Please see below.
Regards
Lyle
-----Original Message-----
From: mailto:lyle.ziegelmiller@gmail.com <mailto:lyle.ziegelmiller@gmail.com>
Sent: Saturday, November 23, 2019 4:33 PM
To: mailto:philipoakley@iee.email
Subject: FW: unpacking error
Hi Philip
Any updates on this?
Thanks
Lyle
-----Original Message-----
From: mailto:lyle.ziegelmiller@gmail.com <mailto:lyle.ziegelmiller@gmail.com>
Sent: Monday, October 28, 2019 9:48 PM
To: 'Philip Oakley' <mailto:philipoakley@iee.email>; 'git bug report' <mailto:git@vger.kernel.org>
Subject: RE: unpacking error
From: Philip Oakley <mailto:philipoakley@iee.email>
Sent: Monday, October 28, 2019 3:14 AM
To: mailto:lyle.ziegelmiller@gmail.com; 'git bug report' <mailto:git@vger.kernel.org>
Subject: Re: unpacking error
Hi Philip.
Thanks for writing back. Please see below.
Regards
Lyle
On 28/10/2019 00:11, mailto:lyle.ziegelmiller@gmail.com wrote:
Hi
I almost always get this error when pushing from my PC to the bare
repository on my laptop. I'm running Cygwin on Windows 10. I've tried
everything! chmod -R 777, chown -R <my user id>, etc.
A few more details: I have a Git repository on my PC, and from that,
I've cloned a bare repository on my laptop,
[Philip] "How did you clone that bare repository? In particular, how did you provide the path to that repo."
I'm recreating the entire process below with a smaller repository on my PC (so it won't take hours to clone, etc):
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git clone --bare . //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
Cloning into bare repository '//lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git'...
done.
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ echo "line1" > afile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git add afile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git commit -m 'Added afile.txt'
[master 7fa616b] Added afile.txt
1 file changed, 1 insertion(+)
create mode 100644 afile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git push
Counting objects: 3, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 287 bytes | 287.00 KiB/s, done.
Total 3 (delta 1), reused 0 (delta 0)
remote: fatal: not a git repository: '.'
error: remote unpack failed: unpack-objects abnormal exit To //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
! [remote rejected] master -> master (unpacker error)
error: failed to push some refs to '//lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git'
Note: I'm able to access the remote repository using Cygwin Unix commands on Windows 10:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ ls //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git
config description HEAD hooks info objects packed-refs refs
... and I do have write permission:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ touch //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git/anotherFile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ echo "line2" >> //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git/anotherFile.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git remote -v
origin //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git (fetch) origin //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository.git (push)
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$
So, I can clone the repository, and I can still write to the remote directory using the "touch" and "echo" commands. But I can't push to it. It seems that "clone" can access (create, actually) the remote repository, but "push" cannot access it effectively.
[Philip] "If I understand correctly it must be in a URL format (e.g. file://) to ensure that you get distinct repos, rather than two interrelated repos (thought the docs discuss the issue as being the transport mechanism)."
"file://" is for referring to a local file from within a web browser. "//" is how to begin a path of a file on a remote machine in Windows.
After doing all of this, I created another test file on my laptop (filename: afile2.txt) in the repository on my laptop made by cloning the bare repository that I just created on my laptop, and added the test file afile2.txt to the cloned non-bare git repository, and then did a "git push" on my laptop (the remote machine) to the bare repository on my laptop (the remote machine). Then, back on my PC, I was able to do a git pull even though earlier I could not do a git push:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ git pull
remote: Counting objects: 3, done.
remote: Compressing objects: 100% (2/2), done.
remote: Total 3 (delta 1), reused 0 (delta 0) Unpacking objects: 100% (3/3), done.
From //lylez-laptop/Users/Administrator/bare-repositories/budget-bare-repository
+ e9d5a3c...cd21f1d master -> origin/master (forced update)
Merge made by the 'recursive' strategy.
afile2.txt | 1 +
1 file changed, 1 insertion(+)
create mode 100644 afile2.txt
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ ls
afile.txt afile2.txt backup Budget.xlsx Joanne Scotland.xlsx
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
And there it is, the new file (afile2.txt).
So Git is able to utilize the remote bare repository for cloning on the remote machine, and on the local machine (my PC) it can pull from the remote bare repository, but it can't push to it.
[Philip] "The same issue probably applies to the subsequent clones of the bare repo."
[Philip] "Perhaps focus on the error message and decide if "." is the correct way of thinking about the path."
"." is the local directory on my PC that was initially cloned. It is where the Git repository reside:
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
$ ls -a
. .. .git afile.txt afile2.txt backup Budget.xlsx Joanne Scotland.xlsx
lylez@LJZ-DELLPC /cygdrive/c/Users/lyle/documents/budget
which I then used to clone a regular repository on my laptop. The
error occurs when I attempt to push changes on my PC into the bare
repository on my laptop.
If I delete the old bare repository on my laptop, I'm able to create a
new bare repository on my laptop from my pc, but then as soon as I try
to push to it, I get this error again. I've tried disabling the anti-virus, etc.
I've spent hours Googling solutions. Nothing works! Many others have
had this same issue. I never had this type of problem with SVN.
It would be nice if Git would say what's failing when this happens,
and it would be nice to get this bug fixed. It happens with all my git
repositories. I don't think it's a network issue or I wouldn't be able
to create a new repository on my laptop from my PC, as that would
encounter the same permissions issues.
The two machines are connected with an ethernet cable. I've done
everything I can to make sure all the Windows permissions are set correctly, etc.
$ git push
Counting objects: 3, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (3/3), done.
Writing objects: 100% (3/3), 331 bytes | 331.00 KiB/s, done.
Total 3 (delta 2), reused 0 (delta 0)
remote: fatal: not a git repository: '.'
[Philip] "Why is the remote end of the connection reporting the error that it is looking at "." (as opposed to a proper path/repo)?"
I'm not sure. I cloned ".". I think that's a legitimate thing to do.
All this stuff has worked for me for years. I'm not sure why it's stopped working.
[Philip] "I could easily be wrong - I haven't double checked the man pages at all, but thought a comment may help your research."
error: remote unpack failed: unpack-objects abnormal exit To
//lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-rep
ositor
y.git/
! [remote rejected] timestamp_testing -> timestamp_testing (unpacker
error)
error: failed to push some refs to
'//lylez-laptop/Users/Administrator/bare-repositories/Tradelab-bare-re
posito
ry.git/'
$ git --version
git version 2.17.0
________________________________________
System Information
________________________________________
Time of this report: 10/27/2019, 16:53:09
Machine name: LJZ-DELLPC
Machine Id: {39BC0826-743F-4ECA-AFBE-66A14FBE533C}
Operating System: Windows 10 Pro 64-bit (10.0, Build 17134)
(17134.rs4_release.180410-1804)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Inspiron 3650
BIOS: BIOS Date: 06/17/16 21:14:07 Ver: 05.0000B (type:
BIOS)
Processor: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (4
CPUs), ~2.7GHz
Memory: 8192MB RAM
Available OS Memory: 8096MB RAM
Page File: 8076MB used, 7243MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Miracast: Available, with HDCP Microsoft Graphics Hybrid:
Not Supported
DxDiag Version: 10.00.17134.0001 64bit Unicode
Regards,
Lyle Ziegelmiller
--
Philip
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-01-18 18:07 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-28 0:11 unpacking error lyle.ziegelmiller
2019-10-28 10:14 ` Philip Oakley
2019-10-29 4:47 ` lyle.ziegelmiller
[not found] ` <001a01d5a256$5e64d010$1b2e7030$@gmail.com>
2019-11-24 14:53 ` FW: " Philip Oakley
2019-12-25 18:49 ` lyle.ziegelmiller
[not found] ` <4C0A4F83-DD45-455F-B086-3416F86C1CCE@iee.email>
2020-01-18 18:07 ` lyle.ziegelmiller
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.