[PATCH 0/7] Second batch of Tegra clock updates for 2.6.39

[PATCH 0/7] Second batch of Tegra clock updates for 2.6.39

[Colin Cross]

This patch series contains two small patches out of the previous
series that needed fixes, as well as some new ones to disable
unused clocks during boot and related bug fixes.

Patch 4 converts the Harmony and Trimslice boards to use the new
init_early machine handler.  Any boards that go in after this
patch will need to be updated to match, and this patch will need
to be updated if any boards go in before this patch.

Tested-bys on Harmony and Trimslice would be appreciated.

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 0/7] Second batch of Tegra clock updates for 2.6.39

[Colin Cross]

This patch series contains two small patches out of the previous
series that needed fixes, as well as some new ones to disable
unused clocks during boot and related bug fixes.

Patch 4 converts the Harmony and Trimslice boards to use the new
init_early machine handler.  Any boards that go in after this
patch will need to be updated to match, and this patch will need
to be updated if any boards go in before this patch.

Tested-bys on Harmony and Trimslice would be appreciated.

[PATCH 0/7] Second batch of Tegra clock updates for 2.6.39

[Colin Cross]

This patch series contains two small patches out of the previous
series that needed fixes, as well as some new ones to disable
unused clocks during boot and related bug fixes.

Patch 4 converts the Harmony and Trimslice boards to use the new
init_early machine handler.  Any boards that go in after this
patch will need to be updated to match, and this patch will need
to be updated if any boards go in before this patch.

Tested-bys on Harmony and Trimslice would be appreciated.

[PATCH 1/7] ARM: tegra: clock: Refcount periph clock enables

[Colin Cross]

Some peripheral clocks share enable bits.  Refcount the enables so
that calling clk_disable on one clock will not turn off another
clock.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/tegra2_clocks.c |   37 +++++++++++++++++++++++++++++-----
 1 files changed, 31 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 59e77ba..2ca8b74 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -159,6 +159,12 @@ static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
  */
 static DEFINE_SPINLOCK(clock_register_lock);
 
+/*
+ * Some peripheral clocks share an enable bit, so refcount the enable bits
+ * in registers CLK_ENABLE_L, CLK_ENABLE_H, and CLK_ENABLE_U
+ */
+static int tegra_periph_clk_enable_refcount[3 * 32];
+
 #define clk_writel(value, reg) \
 	__raw_writel(value, (u32)reg_clk_base + (reg))
 #define clk_readl(reg) \
@@ -952,8 +958,17 @@ static void tegra2_periph_clk_init(struct clk *c)
 static int tegra2_periph_clk_enable(struct clk *c)
 {
 	u32 val;
+	unsigned long flags;
+	int refcount;
 	pr_debug("%s on clock %s\n", __func__, c->name);
 
+	spin_lock_irqsave(&clock_register_lock, flags);
+
+	refcount = tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
+
+	if (refcount > 1)
+		goto out;
+
 	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
 		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
 	if (!(c->flags & PERIPH_NO_RESET) && !(c->flags & PERIPH_MANUAL_RESET))
@@ -966,15 +981,29 @@ static int tegra2_periph_clk_enable(struct clk *c)
 		val |= 0x3 << 24;
 		clk_writel(val, c->reg);
 	}
+
+out:
+	spin_unlock_irqrestore(&clock_register_lock, flags);
+
 	return 0;
 }
 
 static void tegra2_periph_clk_disable(struct clk *c)
 {
+	unsigned long flags;
+
 	pr_debug("%s on clock %s\n", __func__, c->name);
 
-	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-		CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+	spin_lock_irqsave(&clock_register_lock, flags);
+
+	if (c->refcnt)
+		tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
+
+	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0)
+		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+			CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+
+	spin_unlock_irqrestore(&clock_register_lock, flags);
 }
 
 static void tegra2_periph_clk_reset(struct clk *c, bool assert)
@@ -2076,7 +2105,6 @@ struct clk tegra_list_clks[] = {
 	PERIPH_CLK("timer",	"timer",		NULL,	5,	0,	26000000,  mux_clk_m,			0),
 	PERIPH_CLK("i2s1",	"i2s.0",		NULL,	11,	0x100,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
 	PERIPH_CLK("i2s2",	"i2s.1",		NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
-	/* FIXME: spdif has 2 clocks but 1 enable */
 	PERIPH_CLK("spdif_out",	"spdif_out",		NULL,	10,	0x108,	100000000, mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
 	PERIPH_CLK("spdif_in",	"spdif_in",		NULL,	10,	0x10c,	100000000, mux_pllp_pllc_pllm,		MUX | DIV_U71),
 	PERIPH_CLK("pwm",	"pwm",			NULL,	17,	0x110,	432000000, mux_pllp_pllc_audio_clkm_clk32,	MUX | DIV_U71),
@@ -2089,7 +2117,6 @@ struct clk tegra_list_clks[] = {
 	PERIPH_CLK("sbc4",	"spi_tegra.3",		NULL,	68,	0x1b4,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
 	PERIPH_CLK("ide",	"ide",			NULL,	25,	0x144,	100000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* requires min voltage */
 	PERIPH_CLK("ndflash",	"tegra_nand",		NULL,	13,	0x160,	164000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	/* FIXME: vfir shares an enable with uartb */
 	PERIPH_CLK("vfir",	"vfir",			NULL,	7,	0x168,	72000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
 	PERIPH_CLK("sdmmc1",	"sdhci-tegra.0",	NULL,	14,	0x150,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
 	PERIPH_CLK("sdmmc2",	"sdhci-tegra.1",	NULL,	9,	0x154,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
@@ -2120,13 +2147,11 @@ struct clk tegra_list_clks[] = {
 	PERIPH_CLK("uarte",	"uart.4",		NULL,	66,	0x1c4,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
 	PERIPH_CLK("3d",	"3d",			NULL,	24,	0x158,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */
 	PERIPH_CLK("2d",	"2d",			NULL,	21,	0x15c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	/* FIXME: vi and vi_sensor share an enable */
 	PERIPH_CLK("vi",	"tegra_camera",		"vi",	20,	0x148,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
 	PERIPH_CLK("vi_sensor",	"tegra_camera",		"vi_sensor",	20,	0x1a8,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_NO_RESET), /* scales with voltage and process_id */
 	PERIPH_CLK("epp",	"epp",			NULL,	19,	0x16c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
 	PERIPH_CLK("mpe",	"mpe",			NULL,	60,	0x170,	250000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
 	PERIPH_CLK("host1x",	"host1x",		NULL,	28,	0x180,	166000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	/* FIXME: cve and tvo share an enable	*/
 	PERIPH_CLK("cve",	"cve",			NULL,	49,	0x140,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
 	PERIPH_CLK("tvo",	"tvo",			NULL,	49,	0x188,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
 	PERIPH_CLK("hdmi",	"hdmi",			NULL,	51,	0x18c,	600000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-- 
1.7.3.1

[PATCH 1/7] ARM: tegra: clock: Refcount periph clock enables

[Colin Cross]

Some peripheral clocks share enable bits.  Refcount the enables so
that calling clk_disable on one clock will not turn off another
clock.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/tegra2_clocks.c |   37 +++++++++++++++++++++++++++++-----
 1 files changed, 31 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 59e77ba..2ca8b74 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -159,6 +159,12 @@ static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
  */
 static DEFINE_SPINLOCK(clock_register_lock);
 
+/*
+ * Some peripheral clocks share an enable bit, so refcount the enable bits
+ * in registers CLK_ENABLE_L, CLK_ENABLE_H, and CLK_ENABLE_U
+ */
+static int tegra_periph_clk_enable_refcount[3 * 32];
+
 #define clk_writel(value, reg) \
 	__raw_writel(value, (u32)reg_clk_base + (reg))
 #define clk_readl(reg) \
@@ -952,8 +958,17 @@ static void tegra2_periph_clk_init(struct clk *c)
 static int tegra2_periph_clk_enable(struct clk *c)
 {
 	u32 val;
+	unsigned long flags;
+	int refcount;
 	pr_debug("%s on clock %s\n", __func__, c->name);
 
+	spin_lock_irqsave(&clock_register_lock, flags);
+
+	refcount = tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
+
+	if (refcount > 1)
+		goto out;
+
 	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
 		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
 	if (!(c->flags & PERIPH_NO_RESET) && !(c->flags & PERIPH_MANUAL_RESET))
@@ -966,15 +981,29 @@ static int tegra2_periph_clk_enable(struct clk *c)
 		val |= 0x3 << 24;
 		clk_writel(val, c->reg);
 	}
+
+out:
+	spin_unlock_irqrestore(&clock_register_lock, flags);
+
 	return 0;
 }
 
 static void tegra2_periph_clk_disable(struct clk *c)
 {
+	unsigned long flags;
+
 	pr_debug("%s on clock %s\n", __func__, c->name);
 
-	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
-		CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+	spin_lock_irqsave(&clock_register_lock, flags);
+
+	if (c->refcnt)
+		tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
+
+	if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0)
+		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
+			CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
+
+	spin_unlock_irqrestore(&clock_register_lock, flags);
 }
 
 static void tegra2_periph_clk_reset(struct clk *c, bool assert)
@@ -2076,7 +2105,6 @@ struct clk tegra_list_clks[] = {
 	PERIPH_CLK("timer",	"timer",		NULL,	5,	0,	26000000,  mux_clk_m,			0),
 	PERIPH_CLK("i2s1",	"i2s.0",		NULL,	11,	0x100,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
 	PERIPH_CLK("i2s2",	"i2s.1",		NULL,	18,	0x104,	26000000,  mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
-	/* FIXME: spdif has 2 clocks but 1 enable */
 	PERIPH_CLK("spdif_out",	"spdif_out",		NULL,	10,	0x108,	100000000, mux_pllaout0_audio2x_pllp_clkm,	MUX | DIV_U71),
 	PERIPH_CLK("spdif_in",	"spdif_in",		NULL,	10,	0x10c,	100000000, mux_pllp_pllc_pllm,		MUX | DIV_U71),
 	PERIPH_CLK("pwm",	"pwm",			NULL,	17,	0x110,	432000000, mux_pllp_pllc_audio_clkm_clk32,	MUX | DIV_U71),
@@ -2089,7 +2117,6 @@ struct clk tegra_list_clks[] = {
 	PERIPH_CLK("sbc4",	"spi_tegra.3",		NULL,	68,	0x1b4,	160000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
 	PERIPH_CLK("ide",	"ide",			NULL,	25,	0x144,	100000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* requires min voltage */
 	PERIPH_CLK("ndflash",	"tegra_nand",		NULL,	13,	0x160,	164000000, mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
-	/* FIXME: vfir shares an enable with uartb */
 	PERIPH_CLK("vfir",	"vfir",			NULL,	7,	0x168,	72000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71),
 	PERIPH_CLK("sdmmc1",	"sdhci-tegra.0",	NULL,	14,	0x150,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
 	PERIPH_CLK("sdmmc2",	"sdhci-tegra.1",	NULL,	9,	0x154,	52000000,  mux_pllp_pllc_pllm_clkm,	MUX | DIV_U71), /* scales with voltage */
@@ -2120,13 +2147,11 @@ struct clk tegra_list_clks[] = {
 	PERIPH_CLK("uarte",	"uart.4",		NULL,	66,	0x1c4,	600000000, mux_pllp_pllc_pllm_clkm,	MUX),
 	PERIPH_CLK("3d",	"3d",			NULL,	24,	0x158,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_MANUAL_RESET), /* scales with voltage and process_id */
 	PERIPH_CLK("2d",	"2d",			NULL,	21,	0x15c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	/* FIXME: vi and vi_sensor share an enable */
 	PERIPH_CLK("vi",	"tegra_camera",		"vi",	20,	0x148,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
 	PERIPH_CLK("vi_sensor",	"tegra_camera",		"vi_sensor",	20,	0x1a8,	150000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71 | PERIPH_NO_RESET), /* scales with voltage and process_id */
 	PERIPH_CLK("epp",	"epp",			NULL,	19,	0x16c,	300000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
 	PERIPH_CLK("mpe",	"mpe",			NULL,	60,	0x170,	250000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
 	PERIPH_CLK("host1x",	"host1x",		NULL,	28,	0x180,	166000000, mux_pllm_pllc_pllp_plla,	MUX | DIV_U71), /* scales with voltage and process_id */
-	/* FIXME: cve and tvo share an enable	*/
 	PERIPH_CLK("cve",	"cve",			NULL,	49,	0x140,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
 	PERIPH_CLK("tvo",	"tvo",			NULL,	49,	0x188,	250000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
 	PERIPH_CLK("hdmi",	"hdmi",			NULL,	51,	0x18c,	600000000, mux_pllp_plld_pllc_clkm,	MUX | DIV_U71), /* requires min voltage */
-- 
1.7.3.1

Re: [PATCH 1/7] ARM: tegra: clock: Refcount periph clock enables

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org> wrote:
> Some peripheral clocks share enable bits.  Refcount the enables so
> that calling clk_disable on one clock will not turn off another
> clock.
>
> Signed-off-by: Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>

Acked-by: Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/7] ARM: tegra: clock: Refcount periph clock enables

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Some peripheral clocks share enable bits. ?Refcount the enables so
> that calling clk_disable on one clock will not turn off another
> clock.
>
> Signed-off-by: Colin Cross <ccross@android.com>

Acked-by: Olof Johansson <olof@lixom.net>

Re: [PATCH 1/7] ARM: tegra: clock: Refcount periph clock enables

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Some peripheral clocks share enable bits.  Refcount the enables so
> that calling clk_disable on one clock will not turn off another
> clock.
>
> Signed-off-by: Colin Cross <ccross@android.com>

Acked-by: Olof Johansson <olof@lixom.net>

[PATCH 2/7] ARM: tegra: clock: Round rate before setting rate

[Colin Cross]

Call the clock's round_rate op, if it exists, before calling
the set_rate op.  This will help later when dvfs is added,
dvfs needs to know what the final rate will be before the
frequency changes.

Also requires fixes to the round rate functions to ensure
calling round rate and then set rate will not cause the
frequency to be rounded down twice.  When picking clock
divider values, the clock framework picks the closest
frequency that is lower than the requested frequency.  If
the new frequency calculated from the divider value is
rounded down, and then passed to set_rate, it will get
rounded down again, possibly resulting in a frequency two
steps lower than the original requested frequency.

Fix the problem by rounding up when calculating the frequency
coming out of a clock divider, so if that frequency is
requested again, the same divider value will be picked.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/clock.c         |   12 ++++++++++++
 arch/arm/mach-tegra/tegra2_clocks.c |    8 ++++----
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index 165aa9c..e028320 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -86,6 +86,7 @@ static unsigned long clk_predict_rate_from_parent(struct clk *c, struct clk *p)
 
 	if (c->mul != 0 && c->div != 0) {
 		rate *= c->mul;
+		rate += c->div - 1; /* round up */
 		do_div(rate, c->div);
 	}
 
@@ -240,12 +241,23 @@ EXPORT_SYMBOL(clk_get_parent);
 
 int clk_set_rate_locked(struct clk *c, unsigned long rate)
 {
+	long new_rate;
+
 	if (!c->ops || !c->ops->set_rate)
 		return -ENOSYS;
 
 	if (rate > c->max_rate)
 		rate = c->max_rate;
 
+	if (c->ops && c->ops->round_rate) {
+		new_rate = c->ops->round_rate(c, rate);
+
+		if (new_rate < 0)
+			return new_rate;
+
+		rate = new_rate;
+	}
+
 	return c->ops->set_rate(c, rate);
 }
 
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 2ca8b74..73e112f 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -898,9 +898,9 @@ static long tegra2_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
 		divider = clk_div71_get_divider(parent_rate, rate);
 		if (divider < 0)
 			return divider;
-		return parent_rate * 2 / (divider + 2);
+		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
 	} else if (c->flags & DIV_2) {
-		return parent_rate / 2;
+		return DIV_ROUND_UP(parent_rate, 2);
 	}
 	return -EINVAL;
 }
@@ -1092,12 +1092,12 @@ static long tegra2_periph_clk_round_rate(struct clk *c,
 		if (divider < 0)
 			return divider;
 
-		return parent_rate * 2 / (divider + 2);
+		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
 	} else if (c->flags & DIV_U16) {
 		divider = clk_div16_get_divider(parent_rate, rate);
 		if (divider < 0)
 			return divider;
-		return parent_rate / (divider + 1);
+		return DIV_ROUND_UP(parent_rate, divider + 1);
 	}
 	return -EINVAL;
 }
-- 
1.7.3.1

[PATCH 2/7] ARM: tegra: clock: Round rate before setting rate

[Colin Cross]

Call the clock's round_rate op, if it exists, before calling
the set_rate op.  This will help later when dvfs is added,
dvfs needs to know what the final rate will be before the
frequency changes.

Also requires fixes to the round rate functions to ensure
calling round rate and then set rate will not cause the
frequency to be rounded down twice.  When picking clock
divider values, the clock framework picks the closest
frequency that is lower than the requested frequency.  If
the new frequency calculated from the divider value is
rounded down, and then passed to set_rate, it will get
rounded down again, possibly resulting in a frequency two
steps lower than the original requested frequency.

Fix the problem by rounding up when calculating the frequency
coming out of a clock divider, so if that frequency is
requested again, the same divider value will be picked.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/clock.c         |   12 ++++++++++++
 arch/arm/mach-tegra/tegra2_clocks.c |    8 ++++----
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index 165aa9c..e028320 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -86,6 +86,7 @@ static unsigned long clk_predict_rate_from_parent(struct clk *c, struct clk *p)
 
 	if (c->mul != 0 && c->div != 0) {
 		rate *= c->mul;
+		rate += c->div - 1; /* round up */
 		do_div(rate, c->div);
 	}
 
@@ -240,12 +241,23 @@ EXPORT_SYMBOL(clk_get_parent);
 
 int clk_set_rate_locked(struct clk *c, unsigned long rate)
 {
+	long new_rate;
+
 	if (!c->ops || !c->ops->set_rate)
 		return -ENOSYS;
 
 	if (rate > c->max_rate)
 		rate = c->max_rate;
 
+	if (c->ops && c->ops->round_rate) {
+		new_rate = c->ops->round_rate(c, rate);
+
+		if (new_rate < 0)
+			return new_rate;
+
+		rate = new_rate;
+	}
+
 	return c->ops->set_rate(c, rate);
 }
 
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 2ca8b74..73e112f 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -898,9 +898,9 @@ static long tegra2_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
 		divider = clk_div71_get_divider(parent_rate, rate);
 		if (divider < 0)
 			return divider;
-		return parent_rate * 2 / (divider + 2);
+		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
 	} else if (c->flags & DIV_2) {
-		return parent_rate / 2;
+		return DIV_ROUND_UP(parent_rate, 2);
 	}
 	return -EINVAL;
 }
@@ -1092,12 +1092,12 @@ static long tegra2_periph_clk_round_rate(struct clk *c,
 		if (divider < 0)
 			return divider;
 
-		return parent_rate * 2 / (divider + 2);
+		return DIV_ROUND_UP(parent_rate * 2, divider + 2);
 	} else if (c->flags & DIV_U16) {
 		divider = clk_div16_get_divider(parent_rate, rate);
 		if (divider < 0)
 			return divider;
-		return parent_rate / (divider + 1);
+		return DIV_ROUND_UP(parent_rate, divider + 1);
 	}
 	return -EINVAL;
 }
-- 
1.7.3.1

Re: [PATCH 2/7] ARM: tegra: clock: Round rate before setting rate

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org> wrote:
> Call the clock's round_rate op, if it exists, before calling
> the set_rate op.  This will help later when dvfs is added,
> dvfs needs to know what the final rate will be before the
> frequency changes.
>
> Also requires fixes to the round rate functions to ensure
> calling round rate and then set rate will not cause the
> frequency to be rounded down twice.  When picking clock
> divider values, the clock framework picks the closest
> frequency that is lower than the requested frequency.  If
> the new frequency calculated from the divider value is
> rounded down, and then passed to set_rate, it will get
> rounded down again, possibly resulting in a frequency two
> steps lower than the original requested frequency.
>
> Fix the problem by rounding up when calculating the frequency
> coming out of a clock divider, so if that frequency is
> requested again, the same divider value will be picked.
>
> Signed-off-by: Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>

Acked-by: Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/7] ARM: tegra: clock: Round rate before setting rate

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Call the clock's round_rate op, if it exists, before calling
> the set_rate op. ?This will help later when dvfs is added,
> dvfs needs to know what the final rate will be before the
> frequency changes.
>
> Also requires fixes to the round rate functions to ensure
> calling round rate and then set rate will not cause the
> frequency to be rounded down twice. ?When picking clock
> divider values, the clock framework picks the closest
> frequency that is lower than the requested frequency. ?If
> the new frequency calculated from the divider value is
> rounded down, and then passed to set_rate, it will get
> rounded down again, possibly resulting in a frequency two
> steps lower than the original requested frequency.
>
> Fix the problem by rounding up when calculating the frequency
> coming out of a clock divider, so if that frequency is
> requested again, the same divider value will be picked.
>
> Signed-off-by: Colin Cross <ccross@android.com>

Acked-by: Olof Johansson <olof@lixom.net>

Re: [PATCH 2/7] ARM: tegra: clock: Round rate before setting rate

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Call the clock's round_rate op, if it exists, before calling
> the set_rate op.  This will help later when dvfs is added,
> dvfs needs to know what the final rate will be before the
> frequency changes.
>
> Also requires fixes to the round rate functions to ensure
> calling round rate and then set rate will not cause the
> frequency to be rounded down twice.  When picking clock
> divider values, the clock framework picks the closest
> frequency that is lower than the requested frequency.  If
> the new frequency calculated from the divider value is
> rounded down, and then passed to set_rate, it will get
> rounded down again, possibly resulting in a frequency two
> steps lower than the original requested frequency.
>
> Fix the problem by rounding up when calculating the frequency
> coming out of a clock divider, so if that frequency is
> requested again, the same divider value will be picked.
>
> Signed-off-by: Colin Cross <ccross@android.com>

Acked-by: Olof Johansson <olof@lixom.net>

[PATCH 3/7] ARM: tegra: clock: Check for clk_num == 0

[Colin Cross]

Peripheral clocks that have no clock enable bit in the
enable registers have their clk_num set to 0.  Bit 0
in the clock enable registers is the CPU clock.
Prevent disables on these peripheral clocks from
accidentally disabling the CPU clock.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/tegra2_clocks.c |   25 +++++++++++++++++++++++++
 1 files changed, 25 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 73e112f..3015a2c 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -946,9 +946,14 @@ static void tegra2_periph_clk_init(struct clk *c)
 	}
 
 	c->state = ON;
+
+	if (!c->u.periph.clk_num)
+		return;
+
 	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
 			PERIPH_CLK_TO_ENB_BIT(c)))
 		c->state = OFF;
+
 	if (!(c->flags & PERIPH_NO_RESET))
 		if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) &
 				PERIPH_CLK_TO_ENB_BIT(c))
@@ -962,6 +967,9 @@ static int tegra2_periph_clk_enable(struct clk *c)
 	int refcount;
 	pr_debug("%s on clock %s\n", __func__, c->name);
 
+	if (!c->u.periph.clk_num)
+		return 0;
+
 	spin_lock_irqsave(&clock_register_lock, flags);
 
 	refcount = tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
@@ -994,6 +1002,9 @@ static void tegra2_periph_clk_disable(struct clk *c)
 
 	pr_debug("%s on clock %s\n", __func__, c->name);
 
+	if (!c->u.periph.clk_num)
+		return;
+
 	spin_lock_irqsave(&clock_register_lock, flags);
 
 	if (c->refcnt)
@@ -1012,6 +1023,9 @@ static void tegra2_periph_clk_reset(struct clk *c, bool assert)
 
 	pr_debug("%s %s on clock %s\n", __func__,
 		 assert ? "assert" : "deassert", c->name);
+
+	BUG_ON(!c->u.periph.clk_num);
+
 	if (!(c->flags & PERIPH_NO_RESET))
 		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
 			   base + PERIPH_CLK_TO_ENB_SET_REG(c));
@@ -1182,6 +1196,10 @@ static void tegra2_clk_double_init(struct clk *c)
 	c->mul = 2;
 	c->div = 1;
 	c->state = ON;
+
+	if (!c->u.periph.clk_num)
+		return;
+
 	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
 			PERIPH_CLK_TO_ENB_BIT(c)))
 		c->state = OFF;
@@ -1269,6 +1287,9 @@ static void tegra2_cdev_clk_init(struct clk *c)
 	/* We could un-tristate the cdev1 or cdev2 pingroup here; this is
 	 * currently done in the pinmux code. */
 	c->state = ON;
+
+	BUG_ON(!c->u.periph.clk_num);
+
 	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
 			PERIPH_CLK_TO_ENB_BIT(c)))
 		c->state = OFF;
@@ -1276,6 +1297,8 @@ static void tegra2_cdev_clk_init(struct clk *c)
 
 static int tegra2_cdev_clk_enable(struct clk *c)
 {
+	BUG_ON(!c->u.periph.clk_num);
+
 	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
 		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
 	return 0;
@@ -1283,6 +1306,8 @@ static int tegra2_cdev_clk_enable(struct clk *c)
 
 static void tegra2_cdev_clk_disable(struct clk *c)
 {
+	BUG_ON(!c->u.periph.clk_num);
+
 	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
 		CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
 }
-- 
1.7.3.1

[PATCH 3/7] ARM: tegra: clock: Check for clk_num == 0

[Colin Cross]

Peripheral clocks that have no clock enable bit in the
enable registers have their clk_num set to 0.  Bit 0
in the clock enable registers is the CPU clock.
Prevent disables on these peripheral clocks from
accidentally disabling the CPU clock.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/tegra2_clocks.c |   25 +++++++++++++++++++++++++
 1 files changed, 25 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 73e112f..3015a2c 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -946,9 +946,14 @@ static void tegra2_periph_clk_init(struct clk *c)
 	}
 
 	c->state = ON;
+
+	if (!c->u.periph.clk_num)
+		return;
+
 	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
 			PERIPH_CLK_TO_ENB_BIT(c)))
 		c->state = OFF;
+
 	if (!(c->flags & PERIPH_NO_RESET))
 		if (clk_readl(RST_DEVICES + PERIPH_CLK_TO_ENB_REG(c)) &
 				PERIPH_CLK_TO_ENB_BIT(c))
@@ -962,6 +967,9 @@ static int tegra2_periph_clk_enable(struct clk *c)
 	int refcount;
 	pr_debug("%s on clock %s\n", __func__, c->name);
 
+	if (!c->u.periph.clk_num)
+		return 0;
+
 	spin_lock_irqsave(&clock_register_lock, flags);
 
 	refcount = tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
@@ -994,6 +1002,9 @@ static void tegra2_periph_clk_disable(struct clk *c)
 
 	pr_debug("%s on clock %s\n", __func__, c->name);
 
+	if (!c->u.periph.clk_num)
+		return;
+
 	spin_lock_irqsave(&clock_register_lock, flags);
 
 	if (c->refcnt)
@@ -1012,6 +1023,9 @@ static void tegra2_periph_clk_reset(struct clk *c, bool assert)
 
 	pr_debug("%s %s on clock %s\n", __func__,
 		 assert ? "assert" : "deassert", c->name);
+
+	BUG_ON(!c->u.periph.clk_num);
+
 	if (!(c->flags & PERIPH_NO_RESET))
 		clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
 			   base + PERIPH_CLK_TO_ENB_SET_REG(c));
@@ -1182,6 +1196,10 @@ static void tegra2_clk_double_init(struct clk *c)
 	c->mul = 2;
 	c->div = 1;
 	c->state = ON;
+
+	if (!c->u.periph.clk_num)
+		return;
+
 	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
 			PERIPH_CLK_TO_ENB_BIT(c)))
 		c->state = OFF;
@@ -1269,6 +1287,9 @@ static void tegra2_cdev_clk_init(struct clk *c)
 	/* We could un-tristate the cdev1 or cdev2 pingroup here; this is
 	 * currently done in the pinmux code. */
 	c->state = ON;
+
+	BUG_ON(!c->u.periph.clk_num);
+
 	if (!(clk_readl(CLK_OUT_ENB + PERIPH_CLK_TO_ENB_REG(c)) &
 			PERIPH_CLK_TO_ENB_BIT(c)))
 		c->state = OFF;
@@ -1276,6 +1297,8 @@ static void tegra2_cdev_clk_init(struct clk *c)
 
 static int tegra2_cdev_clk_enable(struct clk *c)
 {
+	BUG_ON(!c->u.periph.clk_num);
+
 	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
 		CLK_OUT_ENB_SET + PERIPH_CLK_TO_ENB_SET_REG(c));
 	return 0;
@@ -1283,6 +1306,8 @@ static int tegra2_cdev_clk_enable(struct clk *c)
 
 static void tegra2_cdev_clk_disable(struct clk *c)
 {
+	BUG_ON(!c->u.periph.clk_num);
+
 	clk_writel(PERIPH_CLK_TO_ENB_BIT(c),
 		CLK_OUT_ENB_CLR + PERIPH_CLK_TO_ENB_SET_REG(c));
 }
-- 
1.7.3.1

Re: [PATCH 3/7] ARM: tegra: clock: Check for clk_num == 0

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Peripheral clocks that have no clock enable bit in the
> enable registers have their clk_num set to 0.  Bit 0
> in the clock enable registers is the CPU clock.
> Prevent disables on these peripheral clocks from
> accidentally disabling the CPU clock.
>
> Signed-off-by: Colin Cross <ccross@android.com>

Acked-by: Olof Johansson <olof@lixom.net>

May I suggest a slightly more descriptive patch subject though? "ARM:
tegra: clock: prevent accidental disables of cpu clock" or similar,
maybe.


-Olof

[PATCH 3/7] ARM: tegra: clock: Check for clk_num == 0

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Peripheral clocks that have no clock enable bit in the
> enable registers have their clk_num set to 0. ?Bit 0
> in the clock enable registers is the CPU clock.
> Prevent disables on these peripheral clocks from
> accidentally disabling the CPU clock.
>
> Signed-off-by: Colin Cross <ccross@android.com>

Acked-by: Olof Johansson <olof@lixom.net>

May I suggest a slightly more descriptive patch subject though? "ARM:
tegra: clock: prevent accidental disables of cpu clock" or similar,
maybe.


-Olof

[PATCH 4/7] ARM: tegra: Move tegra_common_init to tegra_init_early

[Colin Cross]

Move tegra_common_init to tegra_init_early, and set it
as the init_early entry in the machine struct.
Initializes the clocks earlier so that timers can enable
their clocks.

Also reorders the members in the Harmony and Trimslice
boards' machine structs to match the order they are
called in.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/board-harmony.c   |    7 +++----
 arch/arm/mach-tegra/board-trimslice.c |    7 +++----
 arch/arm/mach-tegra/board.h           |    2 +-
 arch/arm/mach-tegra/common.c          |    2 +-
 4 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index b9dbdb1..368ddff 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -104,8 +104,6 @@ static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
 
 static void __init tegra_harmony_init(void)
 {
-	tegra_common_init();
-
 	tegra_clk_init_from_table(harmony_clk_init_table);
 
 	harmony_pinmux_init();
@@ -116,8 +114,9 @@ static void __init tegra_harmony_init(void)
 MACHINE_START(HARMONY, "harmony")
 	.boot_params  = 0x00000100,
 	.fixup		= tegra_harmony_fixup,
-	.init_irq       = tegra_init_irq,
-	.init_machine   = tegra_harmony_init,
 	.map_io         = tegra_map_common_io,
+	.init_early	= tegra_init_early,
+	.init_irq       = tegra_init_irq,
 	.timer          = &tegra_timer,
+	.init_machine   = tegra_harmony_init,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index ef233b2..0f3081a 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -85,8 +85,6 @@ subsys_initcall(tegra_trimslice_pci_init);
 
 static void __init tegra_trimslice_init(void)
 {
-	tegra_common_init();
-
 	tegra_clk_init_from_table(trimslice_clk_init_table);
 
 	trimslice_pinmux_init();
@@ -97,8 +95,9 @@ static void __init tegra_trimslice_init(void)
 MACHINE_START(TRIMSLICE, "trimslice")
 	.boot_params	= 0x00000100,
 	.fixup		= tegra_trimslice_fixup,
-	.init_irq       = tegra_init_irq,
-	.init_machine   = tegra_trimslice_init,
 	.map_io         = tegra_map_common_io,
+	.init_early	= tegra_init_early,
+	.init_irq       = tegra_init_irq,
 	.timer          = &tegra_timer,
+	.init_machine   = tegra_trimslice_init,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index b3f9c94..1d14df7 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -25,7 +25,7 @@
 
 void tegra_assert_system_reset(char mode, const char *cmd);
 
-void __init tegra_common_init(void);
+void __init tegra_init_early(void);
 void __init tegra_map_common_io(void);
 void __init tegra_init_irq(void);
 void __init tegra_init_clock(void);
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 54826b8..14fa533 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -72,7 +72,7 @@ void __init tegra_init_cache(void)
 
 }
 
-void __init tegra_common_init(void)
+void __init tegra_init_early(void)
 {
 	tegra_init_fuse();
 	tegra_init_clock();
-- 
1.7.3.1

[PATCH 4/7] ARM: tegra: Move tegra_common_init to tegra_init_early

[Colin Cross]

Move tegra_common_init to tegra_init_early, and set it
as the init_early entry in the machine struct.
Initializes the clocks earlier so that timers can enable
their clocks.

Also reorders the members in the Harmony and Trimslice
boards' machine structs to match the order they are
called in.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/board-harmony.c   |    7 +++----
 arch/arm/mach-tegra/board-trimslice.c |    7 +++----
 arch/arm/mach-tegra/board.h           |    2 +-
 arch/arm/mach-tegra/common.c          |    2 +-
 4 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index b9dbdb1..368ddff 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -104,8 +104,6 @@ static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
 
 static void __init tegra_harmony_init(void)
 {
-	tegra_common_init();
-
 	tegra_clk_init_from_table(harmony_clk_init_table);
 
 	harmony_pinmux_init();
@@ -116,8 +114,9 @@ static void __init tegra_harmony_init(void)
 MACHINE_START(HARMONY, "harmony")
 	.boot_params  = 0x00000100,
 	.fixup		= tegra_harmony_fixup,
-	.init_irq       = tegra_init_irq,
-	.init_machine   = tegra_harmony_init,
 	.map_io         = tegra_map_common_io,
+	.init_early	= tegra_init_early,
+	.init_irq       = tegra_init_irq,
 	.timer          = &tegra_timer,
+	.init_machine   = tegra_harmony_init,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index ef233b2..0f3081a 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -85,8 +85,6 @@ subsys_initcall(tegra_trimslice_pci_init);
 
 static void __init tegra_trimslice_init(void)
 {
-	tegra_common_init();
-
 	tegra_clk_init_from_table(trimslice_clk_init_table);
 
 	trimslice_pinmux_init();
@@ -97,8 +95,9 @@ static void __init tegra_trimslice_init(void)
 MACHINE_START(TRIMSLICE, "trimslice")
 	.boot_params	= 0x00000100,
 	.fixup		= tegra_trimslice_fixup,
-	.init_irq       = tegra_init_irq,
-	.init_machine   = tegra_trimslice_init,
 	.map_io         = tegra_map_common_io,
+	.init_early	= tegra_init_early,
+	.init_irq       = tegra_init_irq,
 	.timer          = &tegra_timer,
+	.init_machine   = tegra_trimslice_init,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index b3f9c94..1d14df7 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -25,7 +25,7 @@
 
 void tegra_assert_system_reset(char mode, const char *cmd);
 
-void __init tegra_common_init(void);
+void __init tegra_init_early(void);
 void __init tegra_map_common_io(void);
 void __init tegra_init_irq(void);
 void __init tegra_init_clock(void);
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 54826b8..14fa533 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -72,7 +72,7 @@ void __init tegra_init_cache(void)
 
 }
 
-void __init tegra_common_init(void)
+void __init tegra_init_early(void)
 {
 	tegra_init_fuse();
 	tegra_init_clock();
-- 
1.7.3.1

[PATCH 4/7] ARM: tegra: Move tegra_common_init to tegra_init_early

[Colin Cross]

Move tegra_common_init to tegra_init_early, and set it
as the init_early entry in the machine struct.
Initializes the clocks earlier so that timers can enable
their clocks.

Also reorders the members in the Harmony and Trimslice
boards' machine structs to match the order they are
called in.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/board-harmony.c   |    7 +++----
 arch/arm/mach-tegra/board-trimslice.c |    7 +++----
 arch/arm/mach-tegra/board.h           |    2 +-
 arch/arm/mach-tegra/common.c          |    2 +-
 4 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index b9dbdb1..368ddff 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -104,8 +104,6 @@ static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
 
 static void __init tegra_harmony_init(void)
 {
-	tegra_common_init();
-
 	tegra_clk_init_from_table(harmony_clk_init_table);
 
 	harmony_pinmux_init();
@@ -116,8 +114,9 @@ static void __init tegra_harmony_init(void)
 MACHINE_START(HARMONY, "harmony")
 	.boot_params  = 0x00000100,
 	.fixup		= tegra_harmony_fixup,
-	.init_irq       = tegra_init_irq,
-	.init_machine   = tegra_harmony_init,
 	.map_io         = tegra_map_common_io,
+	.init_early	= tegra_init_early,
+	.init_irq       = tegra_init_irq,
 	.timer          = &tegra_timer,
+	.init_machine   = tegra_harmony_init,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index ef233b2..0f3081a 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -85,8 +85,6 @@ subsys_initcall(tegra_trimslice_pci_init);
 
 static void __init tegra_trimslice_init(void)
 {
-	tegra_common_init();
-
 	tegra_clk_init_from_table(trimslice_clk_init_table);
 
 	trimslice_pinmux_init();
@@ -97,8 +95,9 @@ static void __init tegra_trimslice_init(void)
 MACHINE_START(TRIMSLICE, "trimslice")
 	.boot_params	= 0x00000100,
 	.fixup		= tegra_trimslice_fixup,
-	.init_irq       = tegra_init_irq,
-	.init_machine   = tegra_trimslice_init,
 	.map_io         = tegra_map_common_io,
+	.init_early	= tegra_init_early,
+	.init_irq       = tegra_init_irq,
 	.timer          = &tegra_timer,
+	.init_machine   = tegra_trimslice_init,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index b3f9c94..1d14df7 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -25,7 +25,7 @@
 
 void tegra_assert_system_reset(char mode, const char *cmd);
 
-void __init tegra_common_init(void);
+void __init tegra_init_early(void);
 void __init tegra_map_common_io(void);
 void __init tegra_init_irq(void);
 void __init tegra_init_clock(void);
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 54826b8..14fa533 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -72,7 +72,7 @@ void __init tegra_init_cache(void)
 
 }
 
-void __init tegra_common_init(void)
+void __init tegra_init_early(void)
 {
 	tegra_init_fuse();
 	tegra_init_clock();
-- 
1.7.3.1

Re: [PATCH 4/7] ARM: tegra: Move tegra_common_init to tegra_init_early

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Move tegra_common_init to tegra_init_early, and set it
> as the init_early entry in the machine struct.
> Initializes the clocks earlier so that timers can enable
> their clocks.
>
> Also reorders the members in the Harmony and Trimslice
> boards' machine structs to match the order they are
> called in.
>
> Signed-off-by: Colin Cross <ccross@android.com>

Acked-by: Olof Johansson <olof@lixom.net>

Please push this ASAP so I can rebase my series, even if some of the
others might need respin. :)


-Olof

[PATCH 4/7] ARM: tegra: Move tegra_common_init to tegra_init_early

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Move tegra_common_init to tegra_init_early, and set it
> as the init_early entry in the machine struct.
> Initializes the clocks earlier so that timers can enable
> their clocks.
>
> Also reorders the members in the Harmony and Trimslice
> boards' machine structs to match the order they are
> called in.
>
> Signed-off-by: Colin Cross <ccross@android.com>

Acked-by: Olof Johansson <olof@lixom.net>

Please push this ASAP so I can rebase my series, even if some of the
others might need respin. :)


-Olof

[PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Colin Cross]

Enable the timer and rtc clocks to prevent them being
turned off by the bootloader clock disabling code.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/timer.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index ffa6a68..31b4f56 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/interrupt.h>
@@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = {
 
 static void __init tegra_init_timer(void)
 {
+	struct clk *clk;
 	unsigned long rate = clk_measure_input_freq();
 	int ret;
 
+	clk = clk_get_sys("timer", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_enable(clk);
+	clk_put(clk);
+
+	clk = clk_get_sys("rtc-tegra", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_enable(clk);
+	clk_put(clk);
+
 #ifdef CONFIG_HAVE_ARM_TWD
 	twd_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x600);
 #endif
@@ -239,8 +251,6 @@ static void __init tegra_init_timer(void)
 	tegra_clockevent.cpumask = cpu_all_mask;
 	tegra_clockevent.irq = tegra_timer_irq.irq;
 	clockevents_register_device(&tegra_clockevent);
-
-	return;
 }
 
 struct sys_timer tegra_timer = {
-- 
1.7.3.1

[PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Colin Cross]

Enable the timer and rtc clocks to prevent them being
turned off by the bootloader clock disabling code.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/timer.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index ffa6a68..31b4f56 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/err.h>
 #include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/interrupt.h>
@@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = {
 
 static void __init tegra_init_timer(void)
 {
+	struct clk *clk;
 	unsigned long rate = clk_measure_input_freq();
 	int ret;
 
+	clk = clk_get_sys("timer", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_enable(clk);
+	clk_put(clk);
+
+	clk = clk_get_sys("rtc-tegra", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_enable(clk);
+	clk_put(clk);
+
 #ifdef CONFIG_HAVE_ARM_TWD
 	twd_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x600);
 #endif
@@ -239,8 +251,6 @@ static void __init tegra_init_timer(void)
 	tegra_clockevent.cpumask = cpu_all_mask;
 	tegra_clockevent.irq = tegra_timer_irq.irq;
 	clockevents_register_device(&tegra_clockevent);
-
-	return;
 }
 
 struct sys_timer tegra_timer = {
-- 
1.7.3.1

Re: [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Olof Johansson]

Hi,


On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org> wrote:
> Enable the timer and rtc clocks to prevent them being
> turned off by the bootloader clock disabling code.
>
> Signed-off-by: Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
> ---
>  arch/arm/mach-tegra/timer.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
> index ffa6a68..31b4f56 100644
> --- a/arch/arm/mach-tegra/timer.c
> +++ b/arch/arm/mach-tegra/timer.c
> @@ -18,6 +18,7 @@
>  */
>
>  #include <linux/init.h>
> +#include <linux/err.h>
>  #include <linux/sched.h>
>  #include <linux/time.h>
>  #include <linux/interrupt.h>
> @@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = {
>
>  static void __init tegra_init_timer(void)
>  {
> +       struct clk *clk;
>        unsigned long rate = clk_measure_input_freq();
>        int ret;
>
> +       clk = clk_get_sys("timer", NULL);
> +       BUG_ON(IS_ERR(clk));
> +       clk_enable(clk);
> +       clk_put(clk);
> +
> +       clk = clk_get_sys("rtc-tegra", NULL);
> +       BUG_ON(IS_ERR(clk));
> +       clk_enable(clk);
> +       clk_put(clk);

Why initialize the rtc clock here? Not all boards use it and instead
use the rtc on the pmic. Seems wasteful to clock it unless the driver
for it is probed and configured.


-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Olof Johansson]

Hi,


On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Enable the timer and rtc clocks to prevent them being
> turned off by the bootloader clock disabling code.
>
> Signed-off-by: Colin Cross <ccross@android.com>
> ---
> ?arch/arm/mach-tegra/timer.c | ? 14 ++++++++++++--
> ?1 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
> index ffa6a68..31b4f56 100644
> --- a/arch/arm/mach-tegra/timer.c
> +++ b/arch/arm/mach-tegra/timer.c
> @@ -18,6 +18,7 @@
> ?*/
>
> ?#include <linux/init.h>
> +#include <linux/err.h>
> ?#include <linux/sched.h>
> ?#include <linux/time.h>
> ?#include <linux/interrupt.h>
> @@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = {
>
> ?static void __init tegra_init_timer(void)
> ?{
> + ? ? ? struct clk *clk;
> ? ? ? ?unsigned long rate = clk_measure_input_freq();
> ? ? ? ?int ret;
>
> + ? ? ? clk = clk_get_sys("timer", NULL);
> + ? ? ? BUG_ON(IS_ERR(clk));
> + ? ? ? clk_enable(clk);
> + ? ? ? clk_put(clk);
> +
> + ? ? ? clk = clk_get_sys("rtc-tegra", NULL);
> + ? ? ? BUG_ON(IS_ERR(clk));
> + ? ? ? clk_enable(clk);
> + ? ? ? clk_put(clk);

Why initialize the rtc clock here? Not all boards use it and instead
use the rtc on the pmic. Seems wasteful to clock it unless the driver
for it is probed and configured.


-Olof

Re: [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Olof Johansson]

Hi,


On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Enable the timer and rtc clocks to prevent them being
> turned off by the bootloader clock disabling code.
>
> Signed-off-by: Colin Cross <ccross@android.com>
> ---
>  arch/arm/mach-tegra/timer.c |   14 ++++++++++++--
>  1 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
> index ffa6a68..31b4f56 100644
> --- a/arch/arm/mach-tegra/timer.c
> +++ b/arch/arm/mach-tegra/timer.c
> @@ -18,6 +18,7 @@
>  */
>
>  #include <linux/init.h>
> +#include <linux/err.h>
>  #include <linux/sched.h>
>  #include <linux/time.h>
>  #include <linux/interrupt.h>
> @@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = {
>
>  static void __init tegra_init_timer(void)
>  {
> +       struct clk *clk;
>        unsigned long rate = clk_measure_input_freq();
>        int ret;
>
> +       clk = clk_get_sys("timer", NULL);
> +       BUG_ON(IS_ERR(clk));
> +       clk_enable(clk);
> +       clk_put(clk);
> +
> +       clk = clk_get_sys("rtc-tegra", NULL);
> +       BUG_ON(IS_ERR(clk));
> +       clk_enable(clk);
> +       clk_put(clk);

Why initialize the rtc clock here? Not all boards use it and instead
use the rtc on the pmic. Seems wasteful to clock it unless the driver
for it is probed and configured.


-Olof

Re: [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Colin Cross]

On Mon, Feb 21, 2011 at 9:32 PM, Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org> wrote:
> Hi,
>
>
> On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org> wrote:
>> Enable the timer and rtc clocks to prevent them being
>> turned off by the bootloader clock disabling code.
>>
>> Signed-off-by: Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
>> ---
>>  arch/arm/mach-tegra/timer.c |   14 ++++++++++++--
>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
>> index ffa6a68..31b4f56 100644
>> --- a/arch/arm/mach-tegra/timer.c
>> +++ b/arch/arm/mach-tegra/timer.c
>> @@ -18,6 +18,7 @@
>>  */
>>
>>  #include <linux/init.h>
>> +#include <linux/err.h>
>>  #include <linux/sched.h>
>>  #include <linux/time.h>
>>  #include <linux/interrupt.h>
>> @@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = {
>>
>>  static void __init tegra_init_timer(void)
>>  {
>> +       struct clk *clk;
>>        unsigned long rate = clk_measure_input_freq();
>>        int ret;
>>
>> +       clk = clk_get_sys("timer", NULL);
>> +       BUG_ON(IS_ERR(clk));
>> +       clk_enable(clk);
>> +       clk_put(clk);
>> +
>> +       clk = clk_get_sys("rtc-tegra", NULL);
>> +       BUG_ON(IS_ERR(clk));
>> +       clk_enable(clk);
>> +       clk_put(clk);
>
> Why initialize the rtc clock here? Not all boards use it and instead
> use the rtc on the pmic. Seems wasteful to clock it unless the driver
> for it is probed and configured.

timekeeping_suspend uses read_persistent_clock and not the RTC driver
to track time in suspend.  The Tegra implementation of
read_persistent_clock reads from the internal RTC registers.  Its a 32
kHz clock, so it's power usage is negligible, and it is required on
all Tegra boards.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Colin Cross]

On Mon, Feb 21, 2011 at 9:32 PM, Olof Johansson <olof@lixom.net> wrote:
> Hi,
>
>
> On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
>> Enable the timer and rtc clocks to prevent them being
>> turned off by the bootloader clock disabling code.
>>
>> Signed-off-by: Colin Cross <ccross@android.com>
>> ---
>> ?arch/arm/mach-tegra/timer.c | ? 14 ++++++++++++--
>> ?1 files changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
>> index ffa6a68..31b4f56 100644
>> --- a/arch/arm/mach-tegra/timer.c
>> +++ b/arch/arm/mach-tegra/timer.c
>> @@ -18,6 +18,7 @@
>> ?*/
>>
>> ?#include <linux/init.h>
>> +#include <linux/err.h>
>> ?#include <linux/sched.h>
>> ?#include <linux/time.h>
>> ?#include <linux/interrupt.h>
>> @@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = {
>>
>> ?static void __init tegra_init_timer(void)
>> ?{
>> + ? ? ? struct clk *clk;
>> ? ? ? ?unsigned long rate = clk_measure_input_freq();
>> ? ? ? ?int ret;
>>
>> + ? ? ? clk = clk_get_sys("timer", NULL);
>> + ? ? ? BUG_ON(IS_ERR(clk));
>> + ? ? ? clk_enable(clk);
>> + ? ? ? clk_put(clk);
>> +
>> + ? ? ? clk = clk_get_sys("rtc-tegra", NULL);
>> + ? ? ? BUG_ON(IS_ERR(clk));
>> + ? ? ? clk_enable(clk);
>> + ? ? ? clk_put(clk);
>
> Why initialize the rtc clock here? Not all boards use it and instead
> use the rtc on the pmic. Seems wasteful to clock it unless the driver
> for it is probed and configured.

timekeeping_suspend uses read_persistent_clock and not the RTC driver
to track time in suspend.  The Tegra implementation of
read_persistent_clock reads from the internal RTC registers.  Its a 32
kHz clock, so it's power usage is negligible, and it is required on
all Tegra boards.

Re: [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Colin Cross]

On Mon, Feb 21, 2011 at 9:32 PM, Olof Johansson <olof@lixom.net> wrote:
> Hi,
>
>
> On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
>> Enable the timer and rtc clocks to prevent them being
>> turned off by the bootloader clock disabling code.
>>
>> Signed-off-by: Colin Cross <ccross@android.com>
>> ---
>>  arch/arm/mach-tegra/timer.c |   14 ++++++++++++--
>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
>> index ffa6a68..31b4f56 100644
>> --- a/arch/arm/mach-tegra/timer.c
>> +++ b/arch/arm/mach-tegra/timer.c
>> @@ -18,6 +18,7 @@
>>  */
>>
>>  #include <linux/init.h>
>> +#include <linux/err.h>
>>  #include <linux/sched.h>
>>  #include <linux/time.h>
>>  #include <linux/interrupt.h>
>> @@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = {
>>
>>  static void __init tegra_init_timer(void)
>>  {
>> +       struct clk *clk;
>>        unsigned long rate = clk_measure_input_freq();
>>        int ret;
>>
>> +       clk = clk_get_sys("timer", NULL);
>> +       BUG_ON(IS_ERR(clk));
>> +       clk_enable(clk);
>> +       clk_put(clk);
>> +
>> +       clk = clk_get_sys("rtc-tegra", NULL);
>> +       BUG_ON(IS_ERR(clk));
>> +       clk_enable(clk);
>> +       clk_put(clk);
>
> Why initialize the rtc clock here? Not all boards use it and instead
> use the rtc on the pmic. Seems wasteful to clock it unless the driver
> for it is probed and configured.

timekeeping_suspend uses read_persistent_clock and not the RTC driver
to track time in suspend.  The Tegra implementation of
read_persistent_clock reads from the internal RTC registers.  Its a 32
kHz clock, so it's power usage is negligible, and it is required on
all Tegra boards.

Re: [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Olof Johansson]

On Tue, Feb 22, 2011 at 12:00 AM, Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org> wrote:
> On Mon, Feb 21, 2011 at 9:32 PM, Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org> wrote:
>> Hi,
>>
>>
>> On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org> wrote:
>>> Enable the timer and rtc clocks to prevent them being
>>> turned off by the bootloader clock disabling code.
>>>
>>> Signed-off-by: Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
>>> ---
>>>  arch/arm/mach-tegra/timer.c |   14 ++++++++++++--
>>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
>>> index ffa6a68..31b4f56 100644
>>> --- a/arch/arm/mach-tegra/timer.c
>>> +++ b/arch/arm/mach-tegra/timer.c
>>> @@ -18,6 +18,7 @@
>>>  */
>>>
>>>  #include <linux/init.h>
>>> +#include <linux/err.h>
>>>  #include <linux/sched.h>
>>>  #include <linux/time.h>
>>>  #include <linux/interrupt.h>
>>> @@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = {
>>>
>>>  static void __init tegra_init_timer(void)
>>>  {
>>> +       struct clk *clk;
>>>        unsigned long rate = clk_measure_input_freq();
>>>        int ret;
>>>
>>> +       clk = clk_get_sys("timer", NULL);
>>> +       BUG_ON(IS_ERR(clk));
>>> +       clk_enable(clk);
>>> +       clk_put(clk);
>>> +
>>> +       clk = clk_get_sys("rtc-tegra", NULL);
>>> +       BUG_ON(IS_ERR(clk));
>>> +       clk_enable(clk);
>>> +       clk_put(clk);
>>
>> Why initialize the rtc clock here? Not all boards use it and instead
>> use the rtc on the pmic. Seems wasteful to clock it unless the driver
>> for it is probed and configured.
>
> timekeeping_suspend uses read_persistent_clock and not the RTC driver
> to track time in suspend.  The Tegra implementation of
> read_persistent_clock reads from the internal RTC registers.  Its a 32
> kHz clock, so it's power usage is negligible, and it is required on
> all Tegra boards.

Ah, right. A short comment to that effect near the clock enablement
would be useful, but other than that:

Acked-by: Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>


-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Olof Johansson]

On Tue, Feb 22, 2011 at 12:00 AM, Colin Cross <ccross@android.com> wrote:
> On Mon, Feb 21, 2011 at 9:32 PM, Olof Johansson <olof@lixom.net> wrote:
>> Hi,
>>
>>
>> On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
>>> Enable the timer and rtc clocks to prevent them being
>>> turned off by the bootloader clock disabling code.
>>>
>>> Signed-off-by: Colin Cross <ccross@android.com>
>>> ---
>>> ?arch/arm/mach-tegra/timer.c | ? 14 ++++++++++++--
>>> ?1 files changed, 12 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
>>> index ffa6a68..31b4f56 100644
>>> --- a/arch/arm/mach-tegra/timer.c
>>> +++ b/arch/arm/mach-tegra/timer.c
>>> @@ -18,6 +18,7 @@
>>> ?*/
>>>
>>> ?#include <linux/init.h>
>>> +#include <linux/err.h>
>>> ?#include <linux/sched.h>
>>> ?#include <linux/time.h>
>>> ?#include <linux/interrupt.h>
>>> @@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = {
>>>
>>> ?static void __init tegra_init_timer(void)
>>> ?{
>>> + ? ? ? struct clk *clk;
>>> ? ? ? ?unsigned long rate = clk_measure_input_freq();
>>> ? ? ? ?int ret;
>>>
>>> + ? ? ? clk = clk_get_sys("timer", NULL);
>>> + ? ? ? BUG_ON(IS_ERR(clk));
>>> + ? ? ? clk_enable(clk);
>>> + ? ? ? clk_put(clk);
>>> +
>>> + ? ? ? clk = clk_get_sys("rtc-tegra", NULL);
>>> + ? ? ? BUG_ON(IS_ERR(clk));
>>> + ? ? ? clk_enable(clk);
>>> + ? ? ? clk_put(clk);
>>
>> Why initialize the rtc clock here? Not all boards use it and instead
>> use the rtc on the pmic. Seems wasteful to clock it unless the driver
>> for it is probed and configured.
>
> timekeeping_suspend uses read_persistent_clock and not the RTC driver
> to track time in suspend. ?The Tegra implementation of
> read_persistent_clock reads from the internal RTC registers. ?Its a 32
> kHz clock, so it's power usage is negligible, and it is required on
> all Tegra boards.

Ah, right. A short comment to that effect near the clock enablement
would be useful, but other than that:

Acked-by: Olof Johansson <olof@lixom.net>


-Olof

Re: [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Olof Johansson]

On Tue, Feb 22, 2011 at 12:00 AM, Colin Cross <ccross@android.com> wrote:
> On Mon, Feb 21, 2011 at 9:32 PM, Olof Johansson <olof@lixom.net> wrote:
>> Hi,
>>
>>
>> On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
>>> Enable the timer and rtc clocks to prevent them being
>>> turned off by the bootloader clock disabling code.
>>>
>>> Signed-off-by: Colin Cross <ccross@android.com>
>>> ---
>>>  arch/arm/mach-tegra/timer.c |   14 ++++++++++++--
>>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
>>> index ffa6a68..31b4f56 100644
>>> --- a/arch/arm/mach-tegra/timer.c
>>> +++ b/arch/arm/mach-tegra/timer.c
>>> @@ -18,6 +18,7 @@
>>>  */
>>>
>>>  #include <linux/init.h>
>>> +#include <linux/err.h>
>>>  #include <linux/sched.h>
>>>  #include <linux/time.h>
>>>  #include <linux/interrupt.h>
>>> @@ -193,9 +194,20 @@ static struct irqaction tegra_timer_irq = {
>>>
>>>  static void __init tegra_init_timer(void)
>>>  {
>>> +       struct clk *clk;
>>>        unsigned long rate = clk_measure_input_freq();
>>>        int ret;
>>>
>>> +       clk = clk_get_sys("timer", NULL);
>>> +       BUG_ON(IS_ERR(clk));
>>> +       clk_enable(clk);
>>> +       clk_put(clk);
>>> +
>>> +       clk = clk_get_sys("rtc-tegra", NULL);
>>> +       BUG_ON(IS_ERR(clk));
>>> +       clk_enable(clk);
>>> +       clk_put(clk);
>>
>> Why initialize the rtc clock here? Not all boards use it and instead
>> use the rtc on the pmic. Seems wasteful to clock it unless the driver
>> for it is probed and configured.
>
> timekeeping_suspend uses read_persistent_clock and not the RTC driver
> to track time in suspend.  The Tegra implementation of
> read_persistent_clock reads from the internal RTC registers.  Its a 32
> kHz clock, so it's power usage is negligible, and it is required on
> all Tegra boards.

Ah, right. A short comment to that effect near the clock enablement
would be useful, but other than that:

Acked-by: Olof Johansson <olof@lixom.net>


-Olof

Re: [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Russell King - ARM Linux]

On Mon, Feb 21, 2011 at 06:39:50PM -0800, Colin Cross wrote:
> +	struct clk *clk;
>  	unsigned long rate = clk_measure_input_freq();
>  	int ret;
>  
> +	clk = clk_get_sys("timer", NULL);
> +	BUG_ON(IS_ERR(clk));
> +	clk_enable(clk);
> +	clk_put(clk);
> +
> +	clk = clk_get_sys("rtc-tegra", NULL);
> +	BUG_ON(IS_ERR(clk));
> +	clk_enable(clk);
> +	clk_put(clk);

It's probably better to leave them get'd if you're continuing to use
them and just forget the reference.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Russell King - ARM Linux]

On Mon, Feb 21, 2011 at 06:39:50PM -0800, Colin Cross wrote:
> +	struct clk *clk;
>  	unsigned long rate = clk_measure_input_freq();
>  	int ret;
>  
> +	clk = clk_get_sys("timer", NULL);
> +	BUG_ON(IS_ERR(clk));
> +	clk_enable(clk);
> +	clk_put(clk);
> +
> +	clk = clk_get_sys("rtc-tegra", NULL);
> +	BUG_ON(IS_ERR(clk));
> +	clk_enable(clk);
> +	clk_put(clk);

It's probably better to leave them get'd if you're continuing to use
them and just forget the reference.

Re: [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Russell King - ARM Linux]

On Mon, Feb 21, 2011 at 06:39:50PM -0800, Colin Cross wrote:
> +	struct clk *clk;
>  	unsigned long rate = clk_measure_input_freq();
>  	int ret;
>  
> +	clk = clk_get_sys("timer", NULL);
> +	BUG_ON(IS_ERR(clk));
> +	clk_enable(clk);
> +	clk_put(clk);
> +
> +	clk = clk_get_sys("rtc-tegra", NULL);
> +	BUG_ON(IS_ERR(clk));
> +	clk_enable(clk);
> +	clk_put(clk);

It's probably better to leave them get'd if you're continuing to use
them and just forget the reference.

Re: [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Colin Cross]

On Tue, Feb 22, 2011 at 12:56 PM, Russell King - ARM Linux
<linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org> wrote:
> On Mon, Feb 21, 2011 at 06:39:50PM -0800, Colin Cross wrote:
>> +     struct clk *clk;
>>       unsigned long rate = clk_measure_input_freq();
>>       int ret;
>>
>> +     clk = clk_get_sys("timer", NULL);
>> +     BUG_ON(IS_ERR(clk));
>> +     clk_enable(clk);
>> +     clk_put(clk);
>> +
>> +     clk = clk_get_sys("rtc-tegra", NULL);
>> +     BUG_ON(IS_ERR(clk));
>> +     clk_enable(clk);
>> +     clk_put(clk);
>
> It's probably better to leave them get'd if you're continuing to use
> them and just forget the reference.
>

Good point, fixed.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Colin Cross]

On Tue, Feb 22, 2011 at 12:56 PM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Mon, Feb 21, 2011 at 06:39:50PM -0800, Colin Cross wrote:
>> + ? ? struct clk *clk;
>> ? ? ? unsigned long rate = clk_measure_input_freq();
>> ? ? ? int ret;
>>
>> + ? ? clk = clk_get_sys("timer", NULL);
>> + ? ? BUG_ON(IS_ERR(clk));
>> + ? ? clk_enable(clk);
>> + ? ? clk_put(clk);
>> +
>> + ? ? clk = clk_get_sys("rtc-tegra", NULL);
>> + ? ? BUG_ON(IS_ERR(clk));
>> + ? ? clk_enable(clk);
>> + ? ? clk_put(clk);
>
> It's probably better to leave them get'd if you're continuing to use
> them and just forget the reference.
>

Good point, fixed.

Re: [PATCH 5/7] ARM: tegra: timer: Enable timer and rtc clocks

[Colin Cross]

On Tue, Feb 22, 2011 at 12:56 PM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Mon, Feb 21, 2011 at 06:39:50PM -0800, Colin Cross wrote:
>> +     struct clk *clk;
>>       unsigned long rate = clk_measure_input_freq();
>>       int ret;
>>
>> +     clk = clk_get_sys("timer", NULL);
>> +     BUG_ON(IS_ERR(clk));
>> +     clk_enable(clk);
>> +     clk_put(clk);
>> +
>> +     clk = clk_get_sys("rtc-tegra", NULL);
>> +     BUG_ON(IS_ERR(clk));
>> +     clk_enable(clk);
>> +     clk_put(clk);
>
> It's probably better to leave them get'd if you're continuing to use
> them and just forget the reference.
>

Good point, fixed.

[PATCH 6/7] ARM: tegra: common: Enable core clocks

[Colin Cross]

Enable the cpu, emc (memory controller) and csite (debug and
trace controller) clocks during init to prevent them from
being disabled by the bootloader clock disabling code.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/common.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 14fa533..516e100 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -56,6 +56,9 @@ static __initdata struct tegra_clk_init_table common_clk_init_table[] = {
 	{ "sclk",	"pll_p_out4",	108000000,	true },
 	{ "hclk",	"sclk",		108000000,	true },
 	{ "pclk",	"hclk",		54000000,	true },
+	{ "csite",	NULL,		0,		true },
+	{ "emc",	NULL,		0,		true },
+	{ "cpu",	NULL,		0,		true },
 	{ NULL,		NULL,		0,		0},
 };
 
-- 
1.7.3.1

[PATCH 6/7] ARM: tegra: common: Enable core clocks

[Colin Cross]

Enable the cpu, emc (memory controller) and csite (debug and
trace controller) clocks during init to prevent them from
being disabled by the bootloader clock disabling code.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/common.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 14fa533..516e100 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -56,6 +56,9 @@ static __initdata struct tegra_clk_init_table common_clk_init_table[] = {
 	{ "sclk",	"pll_p_out4",	108000000,	true },
 	{ "hclk",	"sclk",		108000000,	true },
 	{ "pclk",	"hclk",		54000000,	true },
+	{ "csite",	NULL,		0,		true },
+	{ "emc",	NULL,		0,		true },
+	{ "cpu",	NULL,		0,		true },
 	{ NULL,		NULL,		0,		0},
 };
 
-- 
1.7.3.1

[PATCH 6/7] ARM: tegra: common: Enable core clocks

[Colin Cross]

Enable the cpu, emc (memory controller) and csite (debug and
trace controller) clocks during init to prevent them from
being disabled by the bootloader clock disabling code.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/common.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index 14fa533..516e100 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -56,6 +56,9 @@ static __initdata struct tegra_clk_init_table common_clk_init_table[] = {
 	{ "sclk",	"pll_p_out4",	108000000,	true },
 	{ "hclk",	"sclk",		108000000,	true },
 	{ "pclk",	"hclk",		54000000,	true },
+	{ "csite",	NULL,		0,		true },
+	{ "emc",	NULL,		0,		true },
+	{ "cpu",	NULL,		0,		true },
 	{ NULL,		NULL,		0,		0},
 };
 
-- 
1.7.3.1

Re: [PATCH 6/7] ARM: tegra: common: Enable core clocks

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org> wrote:
> Enable the cpu, emc (memory controller) and csite (debug and
> trace controller) clocks during init to prevent them from
> being disabled by the bootloader clock disabling code.
>
> Signed-off-by: Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>

Acked-by: Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 6/7] ARM: tegra: common: Enable core clocks

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Enable the cpu, emc (memory controller) and csite (debug and
> trace controller) clocks during init to prevent them from
> being disabled by the bootloader clock disabling code.
>
> Signed-off-by: Colin Cross <ccross@android.com>

Acked-by: Olof Johansson <olof@lixom.net>

Re: [PATCH 6/7] ARM: tegra: common: Enable core clocks

[Olof Johansson]

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Enable the cpu, emc (memory controller) and csite (debug and
> trace controller) clocks during init to prevent them from
> being disabled by the bootloader clock disabling code.
>
> Signed-off-by: Colin Cross <ccross@android.com>

Acked-by: Olof Johansson <olof@lixom.net>

[PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader

[Colin Cross]

Iterates through all clocks, disabling any for which the
refcount is 0 but the clock init detected the bootloader
left the clock on.  Can be disabled with command line
tegra_clock.disable_boot_clocks=N

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/clock.c |   44 +++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 44 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index e028320..6d686ff 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -33,6 +33,9 @@
 #include "board.h"
 #include "clock.h"
 
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "tegra_clock."
+
 /*
  * Locking:
  *
@@ -416,6 +419,47 @@ void tegra_sdmmc_tap_delay(struct clk *c, int delay)
 	spin_unlock_irqrestore(&c->spinlock, flags);
 }
 
+static bool tegra_disable_boot_clocks = true;
+module_param_named(disable_boot_clocks, tegra_disable_boot_clocks, bool,
+	S_IRUGO | S_IWUSR | S_IWGRP);
+
+/*
+ * Iterate through all clocks, disabling any for which the refcount is 0
+ * but the clock init detected the bootloader left the clock on.
+ */
+static int __init tegra_init_disable_boot_clocks(void)
+{
+	struct clk *c;
+
+	mutex_lock(&clock_list_lock);
+
+	list_for_each_entry(c, &clocks, node) {
+		spin_lock_irq(&c->spinlock);
+
+		if (c->refcnt == 0 && c->state == ON &&
+				c->ops && c->ops->disable) {
+			pr_warn_once("%s clocks left on by bootloader:\n",
+				tegra_disable_boot_clocks ?
+					"Disabling" :
+					"Prevented disabling");
+
+			pr_warn("   %s\n", c->name);
+
+			if (tegra_disable_boot_clocks) {
+				c->ops->disable(c);
+				c->state = OFF;
+			}
+		}
+
+		spin_unlock_irq(&c->spinlock);
+	}
+
+	mutex_unlock(&clock_list_lock);
+
+	return 0;
+}
+late_initcall(tegra_init_disable_boot_clocks);
+
 #ifdef CONFIG_DEBUG_FS
 
 static int __clk_lock_all_spinlocks(void)
-- 
1.7.3.1

[PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader

[Colin Cross]

Iterates through all clocks, disabling any for which the
refcount is 0 but the clock init detected the bootloader
left the clock on.  Can be disabled with command line
tegra_clock.disable_boot_clocks=N

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/mach-tegra/clock.c |   44 +++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 44 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index e028320..6d686ff 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -33,6 +33,9 @@
 #include "board.h"
 #include "clock.h"
 
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "tegra_clock."
+
 /*
  * Locking:
  *
@@ -416,6 +419,47 @@ void tegra_sdmmc_tap_delay(struct clk *c, int delay)
 	spin_unlock_irqrestore(&c->spinlock, flags);
 }
 
+static bool tegra_disable_boot_clocks = true;
+module_param_named(disable_boot_clocks, tegra_disable_boot_clocks, bool,
+	S_IRUGO | S_IWUSR | S_IWGRP);
+
+/*
+ * Iterate through all clocks, disabling any for which the refcount is 0
+ * but the clock init detected the bootloader left the clock on.
+ */
+static int __init tegra_init_disable_boot_clocks(void)
+{
+	struct clk *c;
+
+	mutex_lock(&clock_list_lock);
+
+	list_for_each_entry(c, &clocks, node) {
+		spin_lock_irq(&c->spinlock);
+
+		if (c->refcnt == 0 && c->state == ON &&
+				c->ops && c->ops->disable) {
+			pr_warn_once("%s clocks left on by bootloader:\n",
+				tegra_disable_boot_clocks ?
+					"Disabling" :
+					"Prevented disabling");
+
+			pr_warn("   %s\n", c->name);
+
+			if (tegra_disable_boot_clocks) {
+				c->ops->disable(c);
+				c->state = OFF;
+			}
+		}
+
+		spin_unlock_irq(&c->spinlock);
+	}
+
+	mutex_unlock(&clock_list_lock);
+
+	return 0;
+}
+late_initcall(tegra_init_disable_boot_clocks);
+
 #ifdef CONFIG_DEBUG_FS
 
 static int __clk_lock_all_spinlocks(void)
-- 
1.7.3.1

Re: [PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader

[Olof Johansson]

Hi,

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org> wrote:
> Iterates through all clocks, disabling any for which the
> refcount is 0 but the clock init detected the bootloader
> left the clock on.  Can be disabled with command line
> tegra_clock.disable_boot_clocks=N
>
> Signed-off-by: Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
> ---
>  arch/arm/mach-tegra/clock.c |   44 +++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 44 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
> index e028320..6d686ff 100644
> --- a/arch/arm/mach-tegra/clock.c
> +++ b/arch/arm/mach-tegra/clock.c
> @@ -33,6 +33,9 @@
>  #include "board.h"
>  #include "clock.h"
>
> +#undef MODULE_PARAM_PREFIX
> +#define MODULE_PARAM_PREFIX "tegra_clock."
> +
>  /*
>  * Locking:
>  *
> @@ -416,6 +419,47 @@ void tegra_sdmmc_tap_delay(struct clk *c, int delay)
>        spin_unlock_irqrestore(&c->spinlock, flags);
>  }
>
> +static bool tegra_disable_boot_clocks = true;
> +module_param_named(disable_boot_clocks, tegra_disable_boot_clocks, bool,
> +       S_IRUGO | S_IWUSR | S_IWGRP);

I suggest doing this as an early_param instead. I know it's not truly
an early param, but it's the easier way to do non-module bootargs,
i.e. by not requiring a (fake) module prefix. It'd be a little
cleaner, in my opinion. The variable name itself is unique enough to
not need a module prefix for namespace reasons.

Also, Documentation/kernel-parameters.txt should be updated with it.


-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader

[Olof Johansson]

Hi,

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Iterates through all clocks, disabling any for which the
> refcount is 0 but the clock init detected the bootloader
> left the clock on. ?Can be disabled with command line
> tegra_clock.disable_boot_clocks=N
>
> Signed-off-by: Colin Cross <ccross@android.com>
> ---
> ?arch/arm/mach-tegra/clock.c | ? 44 +++++++++++++++++++++++++++++++++++++++++++
> ?1 files changed, 44 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
> index e028320..6d686ff 100644
> --- a/arch/arm/mach-tegra/clock.c
> +++ b/arch/arm/mach-tegra/clock.c
> @@ -33,6 +33,9 @@
> ?#include "board.h"
> ?#include "clock.h"
>
> +#undef MODULE_PARAM_PREFIX
> +#define MODULE_PARAM_PREFIX "tegra_clock."
> +
> ?/*
> ?* Locking:
> ?*
> @@ -416,6 +419,47 @@ void tegra_sdmmc_tap_delay(struct clk *c, int delay)
> ? ? ? ?spin_unlock_irqrestore(&c->spinlock, flags);
> ?}
>
> +static bool tegra_disable_boot_clocks = true;
> +module_param_named(disable_boot_clocks, tegra_disable_boot_clocks, bool,
> + ? ? ? S_IRUGO | S_IWUSR | S_IWGRP);

I suggest doing this as an early_param instead. I know it's not truly
an early param, but it's the easier way to do non-module bootargs,
i.e. by not requiring a (fake) module prefix. It'd be a little
cleaner, in my opinion. The variable name itself is unique enough to
not need a module prefix for namespace reasons.

Also, Documentation/kernel-parameters.txt should be updated with it.


-Olof

Re: [PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader

[Olof Johansson]

Hi,

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> Iterates through all clocks, disabling any for which the
> refcount is 0 but the clock init detected the bootloader
> left the clock on.  Can be disabled with command line
> tegra_clock.disable_boot_clocks=N
>
> Signed-off-by: Colin Cross <ccross@android.com>
> ---
>  arch/arm/mach-tegra/clock.c |   44 +++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 44 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
> index e028320..6d686ff 100644
> --- a/arch/arm/mach-tegra/clock.c
> +++ b/arch/arm/mach-tegra/clock.c
> @@ -33,6 +33,9 @@
>  #include "board.h"
>  #include "clock.h"
>
> +#undef MODULE_PARAM_PREFIX
> +#define MODULE_PARAM_PREFIX "tegra_clock."
> +
>  /*
>  * Locking:
>  *
> @@ -416,6 +419,47 @@ void tegra_sdmmc_tap_delay(struct clk *c, int delay)
>        spin_unlock_irqrestore(&c->spinlock, flags);
>  }
>
> +static bool tegra_disable_boot_clocks = true;
> +module_param_named(disable_boot_clocks, tegra_disable_boot_clocks, bool,
> +       S_IRUGO | S_IWUSR | S_IWGRP);

I suggest doing this as an early_param instead. I know it's not truly
an early param, but it's the easier way to do non-module bootargs,
i.e. by not requiring a (fake) module prefix. It'd be a little
cleaner, in my opinion. The variable name itself is unique enough to
not need a module prefix for namespace reasons.

Also, Documentation/kernel-parameters.txt should be updated with it.


-Olof

Re: [PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader

[Colin Cross]

On Mon, Feb 21, 2011 at 9:43 PM, Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org> wrote:
> Hi,
>
> On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org> wrote:
>> Iterates through all clocks, disabling any for which the
>> refcount is 0 but the clock init detected the bootloader
>> left the clock on.  Can be disabled with command line
>> tegra_clock.disable_boot_clocks=N
>>
>> Signed-off-by: Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
>> ---
>>  arch/arm/mach-tegra/clock.c |   44 +++++++++++++++++++++++++++++++++++++++++++
>>  1 files changed, 44 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
>> index e028320..6d686ff 100644
>> --- a/arch/arm/mach-tegra/clock.c
>> +++ b/arch/arm/mach-tegra/clock.c
>> @@ -33,6 +33,9 @@
>>  #include "board.h"
>>  #include "clock.h"
>>
>> +#undef MODULE_PARAM_PREFIX
>> +#define MODULE_PARAM_PREFIX "tegra_clock."
>> +
>>  /*
>>  * Locking:
>>  *
>> @@ -416,6 +419,47 @@ void tegra_sdmmc_tap_delay(struct clk *c, int delay)
>>        spin_unlock_irqrestore(&c->spinlock, flags);
>>  }
>>
>> +static bool tegra_disable_boot_clocks = true;
>> +module_param_named(disable_boot_clocks, tegra_disable_boot_clocks, bool,
>> +       S_IRUGO | S_IWUSR | S_IWGRP);
>
> I suggest doing this as an early_param instead. I know it's not truly
> an early param, but it's the easier way to do non-module bootargs,
> i.e. by not requiring a (fake) module prefix. It'd be a little
> cleaner, in my opinion. The variable name itself is unique enough to
> not need a module prefix for namespace reasons.
It doesn't need to be an early_param, I can make it a __setup.

> Also, Documentation/kernel-parameters.txt should be updated with it.
Is it really worth adding every debug flag on every platform to
kernel-parametes.txt?  I could add the flag to the warning message
instead.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader

[Colin Cross]

On Mon, Feb 21, 2011 at 9:43 PM, Olof Johansson <olof@lixom.net> wrote:
> Hi,
>
> On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
>> Iterates through all clocks, disabling any for which the
>> refcount is 0 but the clock init detected the bootloader
>> left the clock on. ?Can be disabled with command line
>> tegra_clock.disable_boot_clocks=N
>>
>> Signed-off-by: Colin Cross <ccross@android.com>
>> ---
>> ?arch/arm/mach-tegra/clock.c | ? 44 +++++++++++++++++++++++++++++++++++++++++++
>> ?1 files changed, 44 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
>> index e028320..6d686ff 100644
>> --- a/arch/arm/mach-tegra/clock.c
>> +++ b/arch/arm/mach-tegra/clock.c
>> @@ -33,6 +33,9 @@
>> ?#include "board.h"
>> ?#include "clock.h"
>>
>> +#undef MODULE_PARAM_PREFIX
>> +#define MODULE_PARAM_PREFIX "tegra_clock."
>> +
>> ?/*
>> ?* Locking:
>> ?*
>> @@ -416,6 +419,47 @@ void tegra_sdmmc_tap_delay(struct clk *c, int delay)
>> ? ? ? ?spin_unlock_irqrestore(&c->spinlock, flags);
>> ?}
>>
>> +static bool tegra_disable_boot_clocks = true;
>> +module_param_named(disable_boot_clocks, tegra_disable_boot_clocks, bool,
>> + ? ? ? S_IRUGO | S_IWUSR | S_IWGRP);
>
> I suggest doing this as an early_param instead. I know it's not truly
> an early param, but it's the easier way to do non-module bootargs,
> i.e. by not requiring a (fake) module prefix. It'd be a little
> cleaner, in my opinion. The variable name itself is unique enough to
> not need a module prefix for namespace reasons.
It doesn't need to be an early_param, I can make it a __setup.

> Also, Documentation/kernel-parameters.txt should be updated with it.
Is it really worth adding every debug flag on every platform to
kernel-parametes.txt?  I could add the flag to the warning message
instead.

Re: [PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader

[Colin Cross]

On Mon, Feb 21, 2011 at 9:43 PM, Olof Johansson <olof@lixom.net> wrote:
> Hi,
>
> On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
>> Iterates through all clocks, disabling any for which the
>> refcount is 0 but the clock init detected the bootloader
>> left the clock on.  Can be disabled with command line
>> tegra_clock.disable_boot_clocks=N
>>
>> Signed-off-by: Colin Cross <ccross@android.com>
>> ---
>>  arch/arm/mach-tegra/clock.c |   44 +++++++++++++++++++++++++++++++++++++++++++
>>  1 files changed, 44 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
>> index e028320..6d686ff 100644
>> --- a/arch/arm/mach-tegra/clock.c
>> +++ b/arch/arm/mach-tegra/clock.c
>> @@ -33,6 +33,9 @@
>>  #include "board.h"
>>  #include "clock.h"
>>
>> +#undef MODULE_PARAM_PREFIX
>> +#define MODULE_PARAM_PREFIX "tegra_clock."
>> +
>>  /*
>>  * Locking:
>>  *
>> @@ -416,6 +419,47 @@ void tegra_sdmmc_tap_delay(struct clk *c, int delay)
>>        spin_unlock_irqrestore(&c->spinlock, flags);
>>  }
>>
>> +static bool tegra_disable_boot_clocks = true;
>> +module_param_named(disable_boot_clocks, tegra_disable_boot_clocks, bool,
>> +       S_IRUGO | S_IWUSR | S_IWGRP);
>
> I suggest doing this as an early_param instead. I know it's not truly
> an early param, but it's the easier way to do non-module bootargs,
> i.e. by not requiring a (fake) module prefix. It'd be a little
> cleaner, in my opinion. The variable name itself is unique enough to
> not need a module prefix for namespace reasons.
It doesn't need to be an early_param, I can make it a __setup.

> Also, Documentation/kernel-parameters.txt should be updated with it.
Is it really worth adding every debug flag on every platform to
kernel-parametes.txt?  I could add the flag to the warning message
instead.

Re: [PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader

[Olof Johansson]

Hi,

On Tue, Feb 22, 2011 at 12:05 AM, Colin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org> wrote:

> It doesn't need to be an early_param, I can make it a __setup.

Sounds good.

>> Also, Documentation/kernel-parameters.txt should be updated with it.
> Is it really worth adding every debug flag on every platform to
> kernel-parametes.txt?  I could add the flag to the warning message
> instead.

It looks like most arm sub-archs haven't added theirs, so it's OK to
leave out. I'm not too bothered either way myself.


-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader

[Olof Johansson]

Hi,

On Tue, Feb 22, 2011 at 12:05 AM, Colin Cross <ccross@android.com> wrote:

> It doesn't need to be an early_param, I can make it a __setup.

Sounds good.

>> Also, Documentation/kernel-parameters.txt should be updated with it.
> Is it really worth adding every debug flag on every platform to
> kernel-parametes.txt? ?I could add the flag to the warning message
> instead.

It looks like most arm sub-archs haven't added theirs, so it's OK to
leave out. I'm not too bothered either way myself.


-Olof

Re: [PATCH 7/7] ARM: tegra: clock: Disable clocks left on by bootloader

[Olof Johansson]

Hi,

On Tue, Feb 22, 2011 at 12:05 AM, Colin Cross <ccross@android.com> wrote:

> It doesn't need to be an early_param, I can make it a __setup.

Sounds good.

>> Also, Documentation/kernel-parameters.txt should be updated with it.
> Is it really worth adding every debug flag on every platform to
> kernel-parametes.txt?  I could add the flag to the warning message
> instead.

It looks like most arm sub-archs haven't added theirs, so it's OK to
leave out. I'm not too bothered either way myself.


-Olof

Re: [PATCH 0/7] Second batch of Tegra clock updates for 2.6.39

[Colin Cross]

I pushed everything except the last patch that disables bootloader
clocks to for-next.  I'll repost the last change with Olof's comments
addressed.

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> This patch series contains two small patches out of the previous
> series that needed fixes, as well as some new ones to disable
> unused clocks during boot and related bug fixes.
>
> Patch 4 converts the Harmony and Trimslice boards to use the new
> init_early machine handler.  Any boards that go in after this
> patch will need to be updated to match, and this patch will need
> to be updated if any boards go in before this patch.
>
> Tested-bys on Harmony and Trimslice would be appreciated.
>
>

[PATCH 0/7] Second batch of Tegra clock updates for 2.6.39

[Colin Cross]

I pushed everything except the last patch that disables bootloader
clocks to for-next.  I'll repost the last change with Olof's comments
addressed.

On Mon, Feb 21, 2011 at 6:39 PM, Colin Cross <ccross@android.com> wrote:
> This patch series contains two small patches out of the previous
> series that needed fixes, as well as some new ones to disable
> unused clocks during boot and related bug fixes.
>
> Patch 4 converts the Harmony and Trimslice boards to use the new
> init_early machine handler. ?Any boards that go in after this
> patch will need to be updated to match, and this patch will need
> to be updated if any boards go in before this patch.
>
> Tested-bys on Harmony and Trimslice would be appreciated.
>
>