* Drives missing at boot
@ 2010-07-02 17:56 Mark Knecht
2010-07-03 15:20 ` Mark Knecht
2010-07-03 16:01 ` Tejun Heo
0 siblings, 2 replies; 55+ messages in thread
From: Mark Knecht @ 2010-07-02 17:56 UTC (permalink / raw)
To: Linux Kernel List
[-- Attachment #1: Type: text/plain, Size: 68555 bytes --]
Hi,
I have a newish machine - maybe 3 months old - which unreliably
finds its disk drives at each boot. Probably 40% of the time booting 1
or more drives will be missing.
So far I've been unable to determine what might be wrong. Sometimes
it finds all 5 drives, sometimes only 4 or 3 drives. It's not always
the same drives that are missing. Shown below are two successive warm
boots. The machien had been running with all 5 drives working. The
first time through it missed both /dev/sdd and /dev/sde while the very
next time it found all 5 drives. Each of the 5 drives has been missing
one or more times at different boots. (I.e. - it's not always drive
sdd for instance.)
Every time I boot the AMI BIOS screen says all 5 drives are there.
I have found that if I drop into BIOS before going to grub that
selecting each drive one at a time and reading through it's setup
seems to make the boot more reliable, but not 100%. Probably 80%
reliable.
I don't know what info is required to look at this. I'm running the
newest Gentoo kernel but it's been happening with all kernels I've
tried since I built the machine. I'm attaching the kernel config as
well as dmesg from the last boot which had all the drives. The only
difference in dmesg when the drives don't show up (that I've spotted)
is that the missing drive just isn't in dmesg. (I.e. no error messages
that I could spot.)
Let me know what I might try or what other info you might want. The
motherboard is an Asus Rampage II Extreme with an i7-980x 6 core/12
thread processor. sda, sdb & sdc are part of a RAID1, sdd & sde are
part of a RAID0.
Thanks,
Mark
mark@c2stable ~ $ uname -a
Linux c2stable 2.6.34-gentoo-r1 #1 SMP PREEMPT Fri Jul 2 10:04:52 PDT
2010 x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel
GNU/Linux
mark@c2stable ~ $
mark@c2stable ~ $ ls -la /dev/sd*
brw-rw---- 1 root disk 8, 0 Jul 2 2010 /dev/sda
brw-rw---- 1 root disk 8, 1 Jul 2 2010 /dev/sda1
brw-rw---- 1 root disk 8, 2 Jul 2 2010 /dev/sda2
brw-rw---- 1 root disk 8, 3 Jul 2 2010 /dev/sda3
brw-rw---- 1 root disk 8, 4 Jul 2 2010 /dev/sda4
brw-rw---- 1 root disk 8, 5 Jul 2 2010 /dev/sda5
brw-rw---- 1 root disk 8, 6 Jul 2 2010 /dev/sda6
brw-rw---- 1 root disk 8, 16 Jul 2 2010 /dev/sdb
brw-rw---- 1 root disk 8, 17 Jul 2 2010 /dev/sdb1
brw-rw---- 1 root disk 8, 18 Jul 2 2010 /dev/sdb2
brw-rw---- 1 root disk 8, 19 Jul 2 2010 /dev/sdb3
brw-rw---- 1 root disk 8, 20 Jul 2 2010 /dev/sdb4
brw-rw---- 1 root disk 8, 21 Jul 2 2010 /dev/sdb5
brw-rw---- 1 root disk 8, 22 Jul 2 2010 /dev/sdb6
brw-rw---- 1 root disk 8, 32 Jul 2 2010 /dev/sdc
brw-rw---- 1 root disk 8, 33 Jul 2 2010 /dev/sdc1
brw-rw---- 1 root disk 8, 34 Jul 2 2010 /dev/sdc2
brw-rw---- 1 root disk 8, 35 Jul 2 2010 /dev/sdc3
brw-rw---- 1 root disk 8, 36 Jul 2 2010 /dev/sdc4
brw-rw---- 1 root disk 8, 37 Jul 2 2010 /dev/sdc5
brw-rw---- 1 root disk 8, 38 Jul 2 2010 /dev/sdc6
mark@c2stable ~ $
[AFTER A REBOOT]
mark@c2stable ~ $ ls -la /dev/sd*
brw-rw---- 1 root disk 8, 0 Jul 2 2010 /dev/sda
brw-rw---- 1 root disk 8, 1 Jul 2 2010 /dev/sda1
brw-rw---- 1 root disk 8, 2 Jul 2 2010 /dev/sda2
brw-rw---- 1 root disk 8, 3 Jul 2 2010 /dev/sda3
brw-rw---- 1 root disk 8, 4 Jul 2 2010 /dev/sda4
brw-rw---- 1 root disk 8, 5 Jul 2 2010 /dev/sda5
brw-rw---- 1 root disk 8, 6 Jul 2 2010 /dev/sda6
brw-rw---- 1 root disk 8, 16 Jul 2 2010 /dev/sdb
brw-rw---- 1 root disk 8, 17 Jul 2 2010 /dev/sdb1
brw-rw---- 1 root disk 8, 18 Jul 2 2010 /dev/sdb2
brw-rw---- 1 root disk 8, 19 Jul 2 2010 /dev/sdb3
brw-rw---- 1 root disk 8, 20 Jul 2 2010 /dev/sdb4
brw-rw---- 1 root disk 8, 21 Jul 2 2010 /dev/sdb5
brw-rw---- 1 root disk 8, 22 Jul 2 2010 /dev/sdb6
brw-rw---- 1 root disk 8, 32 Jul 2 2010 /dev/sdc
brw-rw---- 1 root disk 8, 33 Jul 2 2010 /dev/sdc1
brw-rw---- 1 root disk 8, 34 Jul 2 2010 /dev/sdc2
brw-rw---- 1 root disk 8, 35 Jul 2 2010 /dev/sdc3
brw-rw---- 1 root disk 8, 36 Jul 2 2010 /dev/sdc4
brw-rw---- 1 root disk 8, 37 Jul 2 2010 /dev/sdc5
brw-rw---- 1 root disk 8, 38 Jul 2 2010 /dev/sdc6
brw-rw---- 1 root disk 8, 48 Jul 2 2010 /dev/sdd
brw-rw---- 1 root disk 8, 49 Jul 2 2010 /dev/sdd1
brw-rw---- 1 root disk 8, 64 Jul 2 2010 /dev/sde
brw-rw---- 1 root disk 8, 65 Jul 2 2010 /dev/sde1
mark@c2stable ~ $
c2stable ~ # lspci -v
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
Subsystem: ASUSTeK Computer Inc. Device 836b
Flags: fast devsel
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Capabilities: [90] Express Root Port (Slot-), MSI 00
Capabilities: [e0] Power Management version 3
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Access Control Services
Capabilities: [160] Vendor Specific Information <?>
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 1 (rev 13) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device
836b
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Capabilities: [90] Express Root Port (Slot+), MSI 00
Capabilities: [e0] Power Management version 3
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Access Control Services
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 3 (rev 13) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Capabilities: [90] Express Root Port (Slot+), MSI 00
Capabilities: [e0] Power Management version 3
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Access Control Services
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 7 (rev 13) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fba00000-fbafffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Capabilities: [90] Express Root Port (Slot+), MSI 00
Capabilities: [e0] Power Management version 3
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Access Control Services
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management
Registers (rev 13) (prog-if 00 [8259])
Flags: fast devsel
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch
Pad Registers (rev 13) (prog-if 00 [8259])
Flags: fast devsel
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status
and RAS Registers (rev 13) (prog-if 00 [8259])
Flags: fast devsel
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle
Registers (rev 13) (prog-if 00 [8259])
Flags: fast devsel
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 9800 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 9880 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 9c00 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at fb9ff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller
Subsystem: ASUSTeK Computer Inc. Device 82ea
Flags: bus master, fast devsel, latency 0, IRQ 57
Memory at fb9f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 1 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0000000-c03fffff
Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82ea
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 3 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82ea
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 5 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbc00000-fbcfffff
Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82ea
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
Express Port 6 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fbb00000-fbbfffff
Prefetchable memory behind bridge: 00000000c0800000-00000000c09fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82ea
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 9080 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 9400 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 9480 [size=32]
Capabilities: [50] PCI Advanced Features
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fb9fe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
(prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 82d4
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
I/O ports at 8000 [size=8]
I/O ports at 7c00 [size=4]
I/O ports at 7880 [size=8]
I/O ports at 7800 [size=4]
I/O ports at 7480 [size=16]
I/O ports at 7400 [size=16]
Capabilities: [70] Power Management version 3
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: medium devsel, IRQ 18
Memory at fb9fd000 (64-bit, non-prefetchable) [size=256]
I/O ports at 0400 [size=32]
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
I/O ports at 9000 [size=8]
I/O ports at 8c00 [size=4]
I/O ports at 8880 [size=8]
I/O ports at 8800 [size=4]
I/O ports at 8480 [size=16]
I/O ports at 8400 [size=16]
Capabilities: [70] Power Management version 3
Capabilities: [b0] PCI Advanced Features
Kernel driver in use: ata_piix
03:00.0 VGA compatible controller: ATI Technologies Inc Device 68b8
(prog-if 00 [VGA controller])
Subsystem: XFX Pine Group Inc. Device 2991
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fbac0000 (64-bit, non-prefetchable) [size=128K]
I/O ports at a000 [size=256]
Expansion ROM at fbaa0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: radeon
Kernel modules: radeon
03:00.1 Audio device: ATI Technologies Inc Device aa58
Subsystem: XFX Pine Group Inc. Device aa58
Flags: bus master, fast devsel, latency 0, IRQ 58
Memory at fbafc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information <?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
PCI-E Gigabit Ethernet Controller (rev 12)
Subsystem: ASUSTeK Computer Inc. Device 81f8
Flags: bus master, fast devsel, latency 0, IRQ 56
Memory at fbbfc000 (64-bit, non-prefetchable) [size=16K]
I/O ports at b800 [size=256]
Expansion ROM at fbbc0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: sky2
Kernel modules: sky2
05:00.0 SATA controller: JMicron Technology Corp. 20360/20363 Serial
ATA Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 824f
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fbcfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint, MSI 01
Kernel driver in use: ahci
05:00.1 IDE interface: JMicron Technology Corp. 20360/20363 Serial ATA
Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 824f
Flags: fast devsel
I/O ports at cc00 [disabled] [size=8]
I/O ports at c880 [disabled] [size=4]
I/O ports at c800 [disabled] [size=8]
I/O ports at c480 [disabled] [size=4]
I/O ports at c400 [disabled] [size=16]
Capabilities: [68] Power Management version 2
06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
PCI-E Gigabit Ethernet Controller (rev 12)
Subsystem: ASUSTeK Computer Inc. Device 81f8
Flags: bus master, fast devsel, latency 0, IRQ 55
Memory at fbdfc000 (64-bit, non-prefetchable) [size=16K]
I/O ports at d800 [size=256]
Expansion ROM at fbdc0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Express Legacy Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Kernel driver in use: sky2
Kernel modules: sky2
08:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II
IEEE 1394 OHCI Link Layer Controller (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 81fe
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at fbeff000 (32-bit, non-prefetchable) [size=2K]
I/O ports at ec00 [size=128]
Capabilities: [50] Power Management version 2
c2stable ~ #
c2stable ~ # dmesg
Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3
(Gentoo 4.4.3-r2 p1.2) ) #1 SMP PREEMPT Fri Jul 2 10:04:52 PDT 2010
Command line: root=/dev/md5
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
NX (Execute Disable) protection: active
DMI 2.5 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F00000000 write-back
2 base 300000000 mask FC0000000 write-back
3 base 0C0000000 mask FC0000000 uncachable
4 base 0BF800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bf780000
0000000000 - 0080000000 page 1G
0080000000 - 00bf600000 page 2M
00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 12000-15000
init_memory_mapping: 0000000100000000-0000000340000000
0100000000 - 0340000000 page 1G
kernel direct mapping tables up to 340000000 @ 14000-15000
ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
ACPI: FACS 00000000bf798000 00040
ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea000b5fffff] PMD ->
[ffff880002000000-ffff88000c7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00340000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bf780
0: 0x00100000 -> 0x00340000
On node 0 totalpages: 3143439
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3927 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765880 pages, LIFO batch:31
Normal zone: 32256 pages used for memmap
Normal zone: 2327040 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
16 Processors exceeds NR_CPUS limit of 12
SMP: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
early_res array is doubled to 64 at [14000 - 147ff]
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
Kernel command line: root=/dev/md5
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
early_res array is doubled to 128 at [14800 - 157ff]
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
No AGP bridge found
Subtract (60 early reservations)
#1 [0001000000 - 0001771244] TEXT DATA BSS
#2 [0001772000 - 0001772298] BRK
#3 [00000ff790 - 0000100000] BIOS reserved
#4 [00000ff780 - 00000ff790] MP-table mpf
#5 [000009fc00 - 00000f1310] BIOS reserved
#6 [00000f14fc - 00000ff780] BIOS reserved
#7 [00000f1310 - 00000f14fc] MP-table mpc
#8 [0000010000 - 0000012000] TRAMPOLINE
#9 [0000012000 - 0000014000] PGTABLE
#10 [00017722c0 - 00017732c0] BOOTMEM
#11 [0001771280 - 0001771880] BOOTMEM
#12 [0001f74000 - 0001f75000] BOOTMEM
#13 [0001f75000 - 0001f76000] BOOTMEM
#14 [0002000000 - 000c800000] MEMMAP 0
#15 [0001771880 - 0001771a00] BOOTMEM
#16 [00017732c0 - 000178b2c0] BOOTMEM
#17 [000178b2c0 - 00017a32c0] BOOTMEM
#18 [00017a4000 - 00017a5000] BOOTMEM
#19 [0001771a00 - 0001771a41] BOOTMEM
#20 [0001771a80 - 0001771b06] BOOTMEM
#21 [0001771b40 - 0001771da8] BOOTMEM
#22 [0001771dc0 - 0001771e28] BOOTMEM
#23 [0001771e40 - 0001771ea8] BOOTMEM
#24 [0001771ec0 - 0001771f28] BOOTMEM
#25 [0001771f40 - 0001771fa8] BOOTMEM
#26 [00017a32c0 - 00017a3328] BOOTMEM
#27 [00017a3340 - 00017a33a8] BOOTMEM
#28 [00017a33c0 - 00017a3428] BOOTMEM
#29 [00017a3440 - 00017a34a8] BOOTMEM
#30 [00017a34c0 - 00017a3528] BOOTMEM
#31 [00017a3540 - 00017a35a8] BOOTMEM
#32 [0001771fc0 - 0001771fce] BOOTMEM
#33 [00017a35c0 - 00017a35ce] BOOTMEM
#34 [0001800000 - 000181a000] BOOTMEM
#35 [0001820000 - 000183a000] BOOTMEM
#36 [0001840000 - 000185a000] BOOTMEM
#37 [0001860000 - 000187a000] BOOTMEM
#38 [0001880000 - 000189a000] BOOTMEM
#39 [00018a0000 - 00018ba000] BOOTMEM
#40 [00018c0000 - 00018da000] BOOTMEM
#41 [00018e0000 - 00018fa000] BOOTMEM
#42 [0001900000 - 000191a000] BOOTMEM
#43 [0001920000 - 000193a000] BOOTMEM
#44 [0001940000 - 000195a000] BOOTMEM
#45 [0001960000 - 000197a000] BOOTMEM
#46 [00017a3600 - 00017a3608] BOOTMEM
#47 [00017a3640 - 00017a3648] BOOTMEM
#48 [00017a3680 - 00017a36b0] BOOTMEM
#49 [00017a36c0 - 00017a3720] BOOTMEM
#50 [00017a3740 - 00017a3850] BOOTMEM
#51 [00017a3880 - 00017a38c8] BOOTMEM
#52 [00017a3900 - 00017a3948] BOOTMEM
#53 [00017a5000 - 00017ad000] BOOTMEM
#54 [000c800000 - 000d800000] BOOTMEM
#55 [000d800000 - 000e000000] BOOTMEM
#56 [000e000000 - 0012000000] BOOTMEM
#57 [00017ad000 - 00017cd000] BOOTMEM
#58 [000197a000 - 00019ba000] BOOTMEM
#59 [0000015800 - 000001d800] BOOTMEM
Memory: 12302060k/13631488k available (3665k kernel code, 1057732k
absent, 271696k reserved, 2924k data, 476k init)
Experimental preemptable hierarchical RCU implementation.
NR_IRQS:640
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3337.884 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 6675.76 BogoMIPS (lpj=3337884)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Freeing SMP alternatives: 36k freed
ACPI: Core revision 20100121
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
Brought up 12 CPUs
Total of 12 processors activated (81162.38 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff]
(subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0500-0x057f] could not be reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:03:00.0: Boot video device
PCI: CLS 256 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
software IO TLB at phys 0xe000000 - 0x12000000
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.13)
msgmni has been set to 24027
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
Non-volatile memory driver v1.3
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ahci 0000:05:00.0: version 3.0
ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:05:00.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
console [netcon0] enabled
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata6: link resume succeeded after 1 retries
ata5: link resume succeeded after 1 retries
usb 3-2: new full speed USB device using uhci_hcd and address 2
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: configured for UDMA/133
ata5.00: configured for UDMA/133
usb 3-2: New USB device found, idVendor=051d, idProduct=0002
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
usb 3-2: Manufacturer: American Power Conversion
usb 3-2: SerialNumber: 3B1007X44377
generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00
Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB
FW:L1 ] on usb-0000:00:1a.0-2/input0
ata3.00: SATA link down (SStatus 0 SControl 301)
ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: configured for UDMA/133
scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:1:0: Attached scsi generic sg0 type 0
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4 <
ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
sda5
ata4.00: configured for UDMA/133
ata4.01: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: Attached scsi generic sg1 type 0
scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:1:0: [sdc] Write Protect is off
sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:1:0: Attached scsi generic sg2 type 0
sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sdc:
sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg3 type 0
sdd:
scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sde: sda6 >
sde1
sd 5:0:0:0: [sde] Attached SCSI disk
sdc1
sd 3:0:0:0: [sdb] Write Protect is off
sdc2 sdc3 sdc4 < sdd1
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Attached SCSI disk
sd 2:0:1:0: [sda] Attached SCSI disk
sdc5
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdc6 >
sdb:
sd 3:0:1:0: [sdc] Attached SCSI disk
sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 8-2: new low speed USB device using uhci_hcd and address 2
usb 8-2: New USB device found, idVendor=045e, idProduct=0039
usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
usb 8-2: Manufacturer: Microsoft
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse
[Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on
usb-0000:00:1d.2-2/input0
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 6 and added 6 devices.
md: autorun ...
md: considering sdb5 ...
md: adding sdb5 ...
md: sdb3 has different UUID to sdb5
md: adding sdc5 ...
md: sdc3 has different UUID to sdb5
md: adding sda5 ...
md: sda3 has different UUID to sdb5
md: created md5
md: bind<sda5>
md: bind<sdc5>
md: bind<sdb5>
md: running: <sdb5><sdc5><sda5>
raid1: raid set md5 active with 3 out of 3 mirrors
md5: detected capacity change from 0 to 53694496768
md: considering sdb3 ...
md: adding sdb3 ...
md: adding sdc3 ...
md: adding sda3 ...
md: created md3
md: bind<sda3>
md: bind<sdc3>
md: bind<sdb3>
md: running: <sdb3><sdc3><sda3>
raid1: raid set md3 active with 3 out of 3 mirrors
md3: detected capacity change from 0 to 53694562304
md: ... autorun DONE.
md5: unknown partition table
kjournald starting. Commit interval 5 seconds
EXT3-fs (md5): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
Freeing unused kernel memory: 476k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 412k freed
Freeing unused kernel memory: 224k freed
udev: starting version 149
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI
region SMRG [mem 0x00000400-0x0000040f pref disabled]
ACPI: If an ACPI driver is available for this device, you should use
it instead of the native driver
md3: unknown partition table
sky2: driver version 1.27
sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sky2 0000:06:00.0: setting latency timer to 64
sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:06:00.0: irq 55 for MSI/MSI-X
sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:04:00.0: irq 56 for MSI/MSI-X
sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
radeon 0000:03:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[drm] register mmio base: 0xFBAC0000
[drm] register mmio size: 131072
ATOM BIOS: JUNIPER
[drm] Clocks initialized !
[drm] 1 Power State(s)
[drm] State 0 Default (default)
[drm] 16 PCIE Lanes
[drm] 1 Clock Mode(s)
[drm] 0 engine/memory: 850000/1200000
[drm] radeon: power management initialized
radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 6151604 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DisplayPort
[drm] HPD4
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD5
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 3:
[drm] DVI-I
[drm] HPD6
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
Console: switching to colour frame buffer device 240x67
hda_codec: AD1989B: BIOS auto-probing.
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
HDA Intel 0000:03:00.1: setting latency timer to 64
EXT3-fs (md5): using internal journal
md: md11 stopped.
md: bind<sde1>
md: bind<sdd1>
raid0: looking at sdd1
raid0: comparing sdd1(104871936)
with sdd1(104871936)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sde1
raid0: comparing sde1(104871936)
with sdd1(104871936)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 209743872 sectors.
******* md11 configuration *********
zone0=[sdd1/sde1/]
zone offset=0kb device offset=0kb size=104871936kb
**********************************
md11: detected capacity change from 0 to 107388862464
md11: unknown partition table
md: md6 stopped.
md: bind<sdb6>
md: bind<sdc6>
md: bind<sda6>
raid1: raid set md6 active with 3 out of 3 mirrors
md6: detected capacity change from 0 to 253354939392
md6: unknown partition table
kjournald starting. Commit interval 5 seconds
EXT3-fs (md11): warning: maximal mount count reached, running e2fsck
is recommended
EXT3-fs (md11): using internal journal
EXT3-fs (md11): mounted filesystem with writeback data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is
recommended
EXT3-fs (md6): using internal journal
EXT3-fs (md6): mounted filesystem with writeback data mode
Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
sky2 0000:06:00.0: eth0: enabling interface
sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
NET: Registered protocol family 10
/dev/vmmon[4187]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[4187]: Initial HV check: anyNotCapable=0 anyUnlocked=0
anyEnabled=1 anyDisabled=0
/dev/vmmon[4187]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1
anyDisabled=0
/dev/vmmon[4187]: Module vmmon: initialized
/dev/vmci[4206]: VMCI: Driver initialized.
/dev/vmci[4206]: Module vmci: registered with major=10 minor=59
/dev/vmci[4206]: Module vmci: initialized
/dev/vmnet: open called by PID 4288 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 4295 (vmnet-dhcpd)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4297 (vmnet-netifup)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4300 (vmnet-dhcpd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 4304 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 4305 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
eth0: no IPv6 routers present
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
c2stable ~ #
[-- Attachment #2: i980.2.6.34-gentoo-r1.config --]
[-- Type: application/octet-stream, Size: 65526 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34-gentoo-r1
# Fri Jul 2 09:56:52 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
# CONFIG_TREE_RCU is not set
CONFIG_TREE_PREEMPT_RCU=y
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=12
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
# CONFIG_DMAR_DEFAULT_ON is not set
CONFIG_DMAR_FLOPPY_WA=y
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
#
# Classification
#
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
#
# PCI IDE chipsets support
#
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=m
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=m
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
CONFIG_IGB=m
CONFIG_IGBVF=m
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VMXNET3=m
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_WINBOND_CIR is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
CONFIG_LPC_SCH=m
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_TTM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_KMS=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FB_CON_DECOR is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_CTXFI=m
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_NTRIG=y
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-02 17:56 Drives missing at boot Mark Knecht
@ 2010-07-03 15:20 ` Mark Knecht
2010-07-03 16:01 ` Tejun Heo
1 sibling, 0 replies; 55+ messages in thread
From: Mark Knecht @ 2010-07-03 15:20 UTC (permalink / raw)
To: Linux Kernel List
On Fri, Jul 2, 2010 at 10:56 AM, Mark Knecht <markknecht@gmail.com> wrote:
> Hi,
> I have a newish machine - maybe 3 months old - which unreliably
> finds its disk drives at each boot. Probably 40% of the time booting 1
> or more drives will be missing.
>
> So far I've been unable to determine what might be wrong. Sometimes
> it finds all 5 drives, sometimes only 4 or 3 drives. It's not always
> the same drives that are missing. Shown below are two successive warm
> boots. The machien had been running with all 5 drives working. The
> first time through it missed both /dev/sdd and /dev/sde while the very
> next time it found all 5 drives. Each of the 5 drives has been missing
> one or more times at different boots. (I.e. - it's not always drive
> sdd for instance.)
>
> Every time I boot the AMI BIOS screen says all 5 drives are there.
> I have found that if I drop into BIOS before going to grub that
> selecting each drive one at a time and reading through it's setup
> seems to make the boot more reliable, but not 100%. Probably 80%
> reliable.
>
> I don't know what info is required to look at this. I'm running the
> newest Gentoo kernel but it's been happening with all kernels I've
> tried since I built the machine. I'm attaching the kernel config as
> well as dmesg from the last boot which had all the drives. The only
> difference in dmesg when the drives don't show up (that I've spotted)
> is that the missing drive just isn't in dmesg. (I.e. no error messages
> that I could spot.)
>
> Let me know what I might try or what other info you might want. The
> motherboard is an Asus Rampage II Extreme with an i7-980x 6 core/12
> thread processor. sda, sdb & sdc are part of a RAID1, sdd & sde are
> part of a RAID0.
>
> Thanks,
> Mark
>
<SNIP>
As a follow-up here's dmesg on a boot where neither sdd or sde showed up.
- Mark
mark@c2stable ~ $ ls -al /dev/sd*
brw-rw---- 1 root disk 8, 0 Jul 3 2010 /dev/sda
brw-rw---- 1 root disk 8, 1 Jul 3 2010 /dev/sda1
brw-rw---- 1 root disk 8, 2 Jul 3 2010 /dev/sda2
brw-rw---- 1 root disk 8, 3 Jul 3 2010 /dev/sda3
brw-rw---- 1 root disk 8, 4 Jul 3 2010 /dev/sda4
brw-rw---- 1 root disk 8, 5 Jul 3 2010 /dev/sda5
brw-rw---- 1 root disk 8, 6 Jul 3 2010 /dev/sda6
brw-rw---- 1 root disk 8, 16 Jul 3 2010 /dev/sdb
brw-rw---- 1 root disk 8, 17 Jul 3 2010 /dev/sdb1
brw-rw---- 1 root disk 8, 18 Jul 3 2010 /dev/sdb2
brw-rw---- 1 root disk 8, 19 Jul 3 2010 /dev/sdb3
brw-rw---- 1 root disk 8, 20 Jul 3 2010 /dev/sdb4
brw-rw---- 1 root disk 8, 21 Jul 3 2010 /dev/sdb5
brw-rw---- 1 root disk 8, 22 Jul 3 2010 /dev/sdb6
brw-rw---- 1 root disk 8, 32 Jul 3 2010 /dev/sdc
brw-rw---- 1 root disk 8, 33 Jul 3 2010 /dev/sdc1
brw-rw---- 1 root disk 8, 34 Jul 3 2010 /dev/sdc2
brw-rw---- 1 root disk 8, 35 Jul 3 2010 /dev/sdc3
brw-rw---- 1 root disk 8, 36 Jul 3 2010 /dev/sdc4
brw-rw---- 1 root disk 8, 37 Jul 3 2010 /dev/sdc5
brw-rw---- 1 root disk 8, 38 Jul 3 2010 /dev/sdc6
mark@c2stable ~ $ dmesg
Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3
(Gentoo 4.4.3-r2 p1.2) ) #1 SMP PREEMPT Fri Jul 2 10:04:52 PDT 2010
Command line: root=/dev/md5
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
NX (Execute Disable) protection: active
DMI 2.5 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F00000000 write-back
2 base 300000000 mask FC0000000 write-back
3 base 0C0000000 mask FC0000000 uncachable
4 base 0BF800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000ff780] ff780
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bf780000
0000000000 - 0080000000 page 1G
0080000000 - 00bf600000 page 2M
00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 12000-15000
init_memory_mapping: 0000000100000000-0000000340000000
0100000000 - 0340000000 page 1G
kernel direct mapping tables up to 340000000 @ 14000-15000
ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
ACPI: FACS 00000000bf798000 00040
ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
[ffffea0000000000-ffffea000b5fffff] PMD ->
[ffff880002000000-ffff88000c7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00340000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bf780
0: 0x00100000 -> 0x00340000
On node 0 totalpages: 3143439
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3927 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765880 pages, LIFO batch:31
Normal zone: 32256 pages used for memmap
Normal zone: 2327040 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
16 Processors exceeds NR_CPUS limit of 12
SMP: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
early_res array is doubled to 64 at [14000 - 147ff]
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
Kernel command line: root=/dev/md5
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
early_res array is doubled to 128 at [14800 - 157ff]
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
No AGP bridge found
Subtract (60 early reservations)
#1 [0001000000 - 0001771244] TEXT DATA BSS
#2 [0001772000 - 0001772298] BRK
#3 [00000ff790 - 0000100000] BIOS reserved
#4 [00000ff780 - 00000ff790] MP-table mpf
#5 [000009fc00 - 00000f1310] BIOS reserved
#6 [00000f14fc - 00000ff780] BIOS reserved
#7 [00000f1310 - 00000f14fc] MP-table mpc
#8 [0000010000 - 0000012000] TRAMPOLINE
#9 [0000012000 - 0000014000] PGTABLE
#10 [00017722c0 - 00017732c0] BOOTMEM
#11 [0001771280 - 0001771880] BOOTMEM
#12 [0001f74000 - 0001f75000] BOOTMEM
#13 [0001f75000 - 0001f76000] BOOTMEM
#14 [0002000000 - 000c800000] MEMMAP 0
#15 [0001771880 - 0001771a00] BOOTMEM
#16 [00017732c0 - 000178b2c0] BOOTMEM
#17 [000178b2c0 - 00017a32c0] BOOTMEM
#18 [00017a4000 - 00017a5000] BOOTMEM
#19 [0001771a00 - 0001771a41] BOOTMEM
#20 [0001771a80 - 0001771b06] BOOTMEM
#21 [0001771b40 - 0001771da8] BOOTMEM
#22 [0001771dc0 - 0001771e28] BOOTMEM
#23 [0001771e40 - 0001771ea8] BOOTMEM
#24 [0001771ec0 - 0001771f28] BOOTMEM
#25 [0001771f40 - 0001771fa8] BOOTMEM
#26 [00017a32c0 - 00017a3328] BOOTMEM
#27 [00017a3340 - 00017a33a8] BOOTMEM
#28 [00017a33c0 - 00017a3428] BOOTMEM
#29 [00017a3440 - 00017a34a8] BOOTMEM
#30 [00017a34c0 - 00017a3528] BOOTMEM
#31 [00017a3540 - 00017a35a8] BOOTMEM
#32 [0001771fc0 - 0001771fce] BOOTMEM
#33 [00017a35c0 - 00017a35ce] BOOTMEM
#34 [0001800000 - 000181a000] BOOTMEM
#35 [0001820000 - 000183a000] BOOTMEM
#36 [0001840000 - 000185a000] BOOTMEM
#37 [0001860000 - 000187a000] BOOTMEM
#38 [0001880000 - 000189a000] BOOTMEM
#39 [00018a0000 - 00018ba000] BOOTMEM
#40 [00018c0000 - 00018da000] BOOTMEM
#41 [00018e0000 - 00018fa000] BOOTMEM
#42 [0001900000 - 000191a000] BOOTMEM
#43 [0001920000 - 000193a000] BOOTMEM
#44 [0001940000 - 000195a000] BOOTMEM
#45 [0001960000 - 000197a000] BOOTMEM
#46 [00017a3600 - 00017a3608] BOOTMEM
#47 [00017a3640 - 00017a3648] BOOTMEM
#48 [00017a3680 - 00017a36b0] BOOTMEM
#49 [00017a36c0 - 00017a3720] BOOTMEM
#50 [00017a3740 - 00017a3850] BOOTMEM
#51 [00017a3880 - 00017a38c8] BOOTMEM
#52 [00017a3900 - 00017a3948] BOOTMEM
#53 [00017a5000 - 00017ad000] BOOTMEM
#54 [000c800000 - 000d800000] BOOTMEM
#55 [000d800000 - 000e000000] BOOTMEM
#56 [000e000000 - 0012000000] BOOTMEM
#57 [00017ad000 - 00017cd000] BOOTMEM
#58 [000197a000 - 00019ba000] BOOTMEM
#59 [0000015800 - 000001d800] BOOTMEM
Memory: 12302060k/13631488k available (3665k kernel code, 1057732k
absent, 271696k reserved, 2924k data, 476k init)
Experimental preemptable hierarchical RCU implementation.
NR_IRQS:640
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3337.655 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 6675.31 BogoMIPS (lpj=3337655)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Freeing SMP alternatives: 36k freed
ACPI: Core revision 20100121
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
APIC calibration not consistent with PM-Timer: 103ms instead of 100ms
APIC delta adjusted to PM-Timer: 834372 (867738)
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
Brought up 12 CPUs
Total of 12 processors activated (80895.10 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff]
(subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff]
(subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:07: [io 0x0290-0x029f] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0500-0x057f] could not be reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem disabled]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge window [io disabled]
pci 0000:00:03.0: bridge window [mem disabled]
pci 0000:00:03.0: bridge window [mem pref disabled]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07-07]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05-05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08-08]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:03:00.0: Boot video device
PCI: CLS 256 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
software IO TLB at phys 0xe000000 - 0x12000000
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
fuse init (API version 7.13)
msgmni has been set to 24027
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
Non-volatile memory driver v1.3
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ahci 0000:05:00.0: version 3.0
ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:05:00.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
console [netcon0] enabled
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 301)
usb 3-2: new full speed USB device using uhci_hcd and address 2
ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
ata4.00: configured for UDMA/133
ata3.01: configured for UDMA/133
ata4.01: configured for UDMA/133
scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:1:0: Attached scsi generic sg1 type 0
scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sdb:
sd 3:0:1:0: Attached scsi generic sg3 type 0
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sdb1 sdb2 sdb3 sdb4 <
usb 3-2: New USB device found, idVendor=051d, idProduct=0002
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
usb 3-2: Manufacturer: American Power Conversion
usb 3-2: SerialNumber: 3B1007X44377
sda1 sda2 sda3 sda4 < sdb5
sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sda5 sdb6 >
sda6 >
sd 2:0:1:0: [sda] Attached SCSI disk
sd 3:0:1:0: [sdc] Write Protect is off
sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 3:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
sd 3:0:1:0: [sdc] Attached SCSI disk
generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00
Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB
FW:L1 ] on usb-0000:00:1a.0-2/input0
usb 8-2: new low speed USB device using uhci_hcd and address 2
usb 8-2: New USB device found, idVendor=045e, idProduct=0039
usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
usb 8-2: Manufacturer: Microsoft
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse
[Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on
usb-0000:00:1d.2-2/input0
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 6 and added 6 devices.
md: autorun ...
md: considering sdc5 ...
md: adding sdc5 ...
md: sdc3 has different UUID to sdc5
md: adding sdb5 ...
md: sdb3 has different UUID to sdc5
md: adding sda5 ...
md: sda3 has different UUID to sdc5
md: created md5
md: bind<sda5>
md: bind<sdb5>
md: bind<sdc5>
md: running: <sdc5><sdb5><sda5>
raid1: raid set md5 active with 3 out of 3 mirrors
md5: detected capacity change from 0 to 53694496768
md: considering sdc3 ...
md: adding sdc3 ...
md: adding sdb3 ...
md: adding sda3 ...
md: created md3
md: bind<sda3>
md: bind<sdb3>
md: bind<sdc3>
md: running: <sdc3><sdb3><sda3>
raid1: raid set md3 active with 3 out of 3 mirrors
md3: detected capacity change from 0 to 53694562304
md: ... autorun DONE.
md5: unknown partition table
kjournald starting. Commit interval 5 seconds
EXT3-fs (md5): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
Freeing unused kernel memory: 476k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 412k freed
Freeing unused kernel memory: 224k freed
udev: starting version 149
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
md3: unknown partition table
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI
region SMRG [io 0x0400-0x040f 64bit pref window disabled]
ACPI: If an ACPI driver is available for this device, you should use
it instead of the native driver
sky2: driver version 1.27
sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sky2 0000:06:00.0: setting latency timer to 64
sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:06:00.0: irq 55 for MSI/MSI-X
sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:04:00.0: irq 56 for MSI/MSI-X
sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
radeon 0000:03:00.0: setting latency timer to 64
[drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[drm] register mmio base: 0xFBAC0000
[drm] register mmio size: 131072
ATOM BIOS: JUNIPER
[drm] Clocks initialized !
[drm] 1 Power State(s)
[drm] State 0 Default (default)
[drm] 16 PCIE Lanes
[drm] 1 Clock Mode(s)
[drm] 0 engine/memory: 850000/1200000
[drm] radeon: power management initialized
radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 6151604 kiB.
[TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DisplayPort
[drm] HPD4
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A
[drm] HPD5
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I
[drm] HPD1
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] Connector 3:
[drm] DVI-I
[drm] HPD6
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
hda_codec: AD1989B: BIOS auto-probing.
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
Console: switching to colour frame buffer device 240x67
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
HDA Intel 0000:03:00.1: setting latency timer to 64
EXT3-fs (md5): using internal journal
md: md6 stopped.
md: bind<sdb6>
md: bind<sdc6>
md: bind<sda6>
raid1: raid set md6 active with 3 out of 3 mirrors
md6: detected capacity change from 0 to 253354939392
md6: unknown partition table
kjournald starting. Commit interval 5 seconds
EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is
recommended
EXT3-fs (md6): using internal journal
EXT3-fs (md6): mounted filesystem with writeback data mode
Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
sky2 0000:06:00.0: eth0: enabling interface
sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
NET: Registered protocol family 10
/dev/vmmon[4147]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[4147]: Initial HV check: anyNotCapable=0 anyUnlocked=0
anyEnabled=1 anyDisabled=0
/dev/vmmon[4147]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1
anyDisabled=0
/dev/vmmon[4147]: Module vmmon: initialized
/dev/vmci[4166]: VMCI: Driver initialized.
/dev/vmci[4166]: Module vmci: registered with major=10 minor=59
/dev/vmci[4166]: Module vmci: initialized
/dev/vmnet: open called by PID 4248 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
/dev/vmnet: open called by PID 4255 (vmnet-dhcpd)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4257 (vmnet-netifup)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4260 (vmnet-dhcpd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 4264 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 4265 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
eth0: no IPv6 routers present
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
mark@c2stable ~ $
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-02 17:56 Drives missing at boot Mark Knecht
2010-07-03 15:20 ` Mark Knecht
@ 2010-07-03 16:01 ` Tejun Heo
2010-07-03 16:06 ` Mark Knecht
1 sibling, 1 reply; 55+ messages in thread
From: Tejun Heo @ 2010-07-03 16:01 UTC (permalink / raw)
To: Mark Knecht; +Cc: Linux Kernel List, linux-ide
(cc'ing linux-ide)
On 07/02/2010 07:56 PM, Mark Knecht wrote:
> Hi,
> I have a newish machine - maybe 3 months old - which unreliably
> finds its disk drives at each boot. Probably 40% of the time booting 1
> or more drives will be missing.
>
> So far I've been unable to determine what might be wrong. Sometimes
> it finds all 5 drives, sometimes only 4 or 3 drives. It's not always
> the same drives that are missing. Shown below are two successive warm
> boots. The machien had been running with all 5 drives working. The
> first time through it missed both /dev/sdd and /dev/sde while the very
> next time it found all 5 drives. Each of the 5 drives has been missing
> one or more times at different boots. (I.e. - it's not always drive
> sdd for instance.)
>
> Every time I boot the AMI BIOS screen says all 5 drives are there.
> I have found that if I drop into BIOS before going to grub that
> selecting each drive one at a time and reading through it's setup
> seems to make the boot more reliable, but not 100%. Probably 80%
> reliable.
>
> I don't know what info is required to look at this. I'm running the
> newest Gentoo kernel but it's been happening with all kernels I've
> tried since I built the machine. I'm attaching the kernel config as
> well as dmesg from the last boot which had all the drives. The only
> difference in dmesg when the drives don't show up (that I've spotted)
> is that the missing drive just isn't in dmesg. (I.e. no error messages
> that I could spot.)
>
> Let me know what I might try or what other info you might want. The
> motherboard is an Asus Rampage II Extreme with an i7-980x 6 core/12
> thread processor. sda, sdb & sdc are part of a RAID1, sdd & sde are
> part of a RAID0.
Can you please *attach* full logs of a successful boot and several
failing boots?
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 16:01 ` Tejun Heo
@ 2010-07-03 16:06 ` Mark Knecht
2010-07-03 16:13 ` Tejun Heo
2010-07-03 18:56 ` Stan Hoeppner
0 siblings, 2 replies; 55+ messages in thread
From: Mark Knecht @ 2010-07-03 16:06 UTC (permalink / raw)
To: Tejun Heo; +Cc: Linux Kernel List, linux-ide
On Sat, Jul 3, 2010 at 9:01 AM, Tejun Heo <tj@kernel.org> wrote:
> (cc'ing linux-ide)
>
> On 07/02/2010 07:56 PM, Mark Knecht wrote:
>> Hi,
>> I have a newish machine - maybe 3 months old - which unreliably
>> finds its disk drives at each boot. Probably 40% of the time booting 1
>> or more drives will be missing.
>>
>> So far I've been unable to determine what might be wrong. Sometimes
>> it finds all 5 drives, sometimes only 4 or 3 drives. It's not always
>> the same drives that are missing. Shown below are two successive warm
>> boots. The machien had been running with all 5 drives working. The
>> first time through it missed both /dev/sdd and /dev/sde while the very
>> next time it found all 5 drives. Each of the 5 drives has been missing
>> one or more times at different boots. (I.e. - it's not always drive
>> sdd for instance.)
>>
>> Every time I boot the AMI BIOS screen says all 5 drives are there.
>> I have found that if I drop into BIOS before going to grub that
>> selecting each drive one at a time and reading through it's setup
>> seems to make the boot more reliable, but not 100%. Probably 80%
>> reliable.
>>
>> I don't know what info is required to look at this. I'm running the
>> newest Gentoo kernel but it's been happening with all kernels I've
>> tried since I built the machine. I'm attaching the kernel config as
>> well as dmesg from the last boot which had all the drives. The only
>> difference in dmesg when the drives don't show up (that I've spotted)
>> is that the missing drive just isn't in dmesg. (I.e. no error messages
>> that I could spot.)
>>
>> Let me know what I might try or what other info you might want. The
>> motherboard is an Asus Rampage II Extreme with an i7-980x 6 core/12
>> thread processor. sda, sdb & sdc are part of a RAID1, sdd & sde are
>> part of a RAID0.
>
> Can you please *attach* full logs of a successful boot and several
> failing boots?
>
> Thanks.
>
> --
> tejun
>
Certainly? Which logs? dmesg or something else?
Thanks,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 16:06 ` Mark Knecht
@ 2010-07-03 16:13 ` Tejun Heo
2010-07-03 16:42 ` Mark Knecht
2010-07-03 18:56 ` Stan Hoeppner
1 sibling, 1 reply; 55+ messages in thread
From: Tejun Heo @ 2010-07-03 16:13 UTC (permalink / raw)
To: Mark Knecht; +Cc: Linux Kernel List, linux-ide
Hello,
On 07/03/2010 06:06 PM, Mark Knecht wrote:
>> Can you please *attach* full logs of a successful boot and several
>> failing boots?
>
> Certainly? Which logs? dmesg or something else?
dmesg output preferably with printk timestamp enabled.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 16:13 ` Tejun Heo
@ 2010-07-03 16:42 ` Mark Knecht
2010-07-05 6:30 ` Tejun Heo
0 siblings, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-03 16:42 UTC (permalink / raw)
To: Tejun Heo; +Cc: Linux Kernel List, linux-ide
[-- Attachment #1: Type: text/plain, Size: 3214 bytes --]
On Sat, Jul 3, 2010 at 9:13 AM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On 07/03/2010 06:06 PM, Mark Knecht wrote:
>>> Can you please *attach* full logs of a successful boot and several
>>> failing boots?
>>
>> Certainly? Which logs? dmesg or something else?
>
> dmesg output preferably with printk timestamp enabled.
>
> Thanks.
>
> --
> tejun
>
OK, I enable printk timing.
Here are two boots. The first one had /dev/sde come up missing:
mark@c2stable ~ $ ls -al /dev/sd*
brw-rw---- 1 root disk 8, 0 Jul 3 2010 /dev/sda
brw-rw---- 1 root disk 8, 1 Jul 3 2010 /dev/sda1
brw-rw---- 1 root disk 8, 2 Jul 3 2010 /dev/sda2
brw-rw---- 1 root disk 8, 3 Jul 3 2010 /dev/sda3
brw-rw---- 1 root disk 8, 4 Jul 3 2010 /dev/sda4
brw-rw---- 1 root disk 8, 5 Jul 3 2010 /dev/sda5
brw-rw---- 1 root disk 8, 6 Jul 3 2010 /dev/sda6
brw-rw---- 1 root disk 8, 16 Jul 3 2010 /dev/sdb
brw-rw---- 1 root disk 8, 17 Jul 3 2010 /dev/sdb1
brw-rw---- 1 root disk 8, 18 Jul 3 2010 /dev/sdb2
brw-rw---- 1 root disk 8, 19 Jul 3 2010 /dev/sdb3
brw-rw---- 1 root disk 8, 20 Jul 3 2010 /dev/sdb4
brw-rw---- 1 root disk 8, 21 Jul 3 2010 /dev/sdb5
brw-rw---- 1 root disk 8, 22 Jul 3 2010 /dev/sdb6
brw-rw---- 1 root disk 8, 32 Jul 3 2010 /dev/sdc
brw-rw---- 1 root disk 8, 33 Jul 3 2010 /dev/sdc1
brw-rw---- 1 root disk 8, 34 Jul 3 2010 /dev/sdc2
brw-rw---- 1 root disk 8, 35 Jul 3 2010 /dev/sdc3
brw-rw---- 1 root disk 8, 36 Jul 3 2010 /dev/sdc4
brw-rw---- 1 root disk 8, 37 Jul 3 2010 /dev/sdc5
brw-rw---- 1 root disk 8, 38 Jul 3 2010 /dev/sdc6
brw-rw---- 1 root disk 8, 48 Jul 3 2010 /dev/sdd
brw-rw---- 1 root disk 8, 49 Jul 3 2010 /dev/sdd1
mark@c2stable ~ $
I then did two warm boots and got the same problem so I shut down
completely and did a cold boot which worked:
mark@c2stable ~ $ ls -al /dev/sd*
brw-rw---- 1 root disk 8, 0 Jul 3 2010 /dev/sda
brw-rw---- 1 root disk 8, 1 Jul 3 2010 /dev/sda1
brw-rw---- 1 root disk 8, 2 Jul 3 2010 /dev/sda2
brw-rw---- 1 root disk 8, 3 Jul 3 2010 /dev/sda3
brw-rw---- 1 root disk 8, 4 Jul 3 2010 /dev/sda4
brw-rw---- 1 root disk 8, 5 Jul 3 2010 /dev/sda5
brw-rw---- 1 root disk 8, 6 Jul 3 2010 /dev/sda6
brw-rw---- 1 root disk 8, 16 Jul 3 2010 /dev/sdb
brw-rw---- 1 root disk 8, 17 Jul 3 2010 /dev/sdb1
brw-rw---- 1 root disk 8, 18 Jul 3 2010 /dev/sdb2
brw-rw---- 1 root disk 8, 19 Jul 3 2010 /dev/sdb3
brw-rw---- 1 root disk 8, 20 Jul 3 2010 /dev/sdb4
brw-rw---- 1 root disk 8, 21 Jul 3 2010 /dev/sdb5
brw-rw---- 1 root disk 8, 22 Jul 3 2010 /dev/sdb6
brw-rw---- 1 root disk 8, 32 Jul 3 2010 /dev/sdc
brw-rw---- 1 root disk 8, 33 Jul 3 2010 /dev/sdc1
brw-rw---- 1 root disk 8, 34 Jul 3 2010 /dev/sdc2
brw-rw---- 1 root disk 8, 35 Jul 3 2010 /dev/sdc3
brw-rw---- 1 root disk 8, 36 Jul 3 2010 /dev/sdc4
brw-rw---- 1 root disk 8, 37 Jul 3 2010 /dev/sdc5
brw-rw---- 1 root disk 8, 38 Jul 3 2010 /dev/sdc6
brw-rw---- 1 root disk 8, 48 Jul 3 2010 /dev/sdd
brw-rw---- 1 root disk 8, 49 Jul 3 2010 /dev/sdd1
brw-rw---- 1 root disk 8, 64 Jul 3 2010 /dev/sde
brw-rw---- 1 root disk 8, 65 Jul 3 2010 /dev/sde1
mark@c2stable ~ $
Let me know what else you might need.
Thanks!
Cheers,
Mark
[-- Attachment #2: dmesg.DriveEmissing --]
[-- Type: application/octet-stream, Size: 60900 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #2 SMP PREEMPT Sat Jul 3 09:21:09 PDT 2010
[ 0.000000] Command line: root=/dev/md5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 1G
[ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000
[ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143439
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 12
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] early_res array is doubled to 64 at [14000 - 147ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
[ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
[ 0.000000] Kernel command line: root=/dev/md5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] early_res array is doubled to 128 at [14800 - 157ff]
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (60 early reservations)
[ 0.000000] #1 [0001000000 - 0001771244] TEXT DATA BSS
[ 0.000000] #2 [0001772000 - 0001772298] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved
[ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM
[ 0.000000] #11 [0001771280 - 0001771880] BOOTMEM
[ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM
[ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM
[ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0
[ 0.000000] #15 [0001771880 - 0001771a00] BOOTMEM
[ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM
[ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM
[ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM
[ 0.000000] #19 [0001771a00 - 0001771a41] BOOTMEM
[ 0.000000] #20 [0001771a80 - 0001771b06] BOOTMEM
[ 0.000000] #21 [0001771b40 - 0001771da8] BOOTMEM
[ 0.000000] #22 [0001771dc0 - 0001771e28] BOOTMEM
[ 0.000000] #23 [0001771e40 - 0001771ea8] BOOTMEM
[ 0.000000] #24 [0001771ec0 - 0001771f28] BOOTMEM
[ 0.000000] #25 [0001771f40 - 0001771fa8] BOOTMEM
[ 0.000000] #26 [00017a32c0 - 00017a3328] BOOTMEM
[ 0.000000] #27 [00017a3340 - 00017a33a8] BOOTMEM
[ 0.000000] #28 [00017a33c0 - 00017a3428] BOOTMEM
[ 0.000000] #29 [00017a3440 - 00017a34a8] BOOTMEM
[ 0.000000] #30 [00017a34c0 - 00017a3528] BOOTMEM
[ 0.000000] #31 [00017a3540 - 00017a35a8] BOOTMEM
[ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM
[ 0.000000] #33 [00017a35c0 - 00017a35ce] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM
[ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM
[ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM
[ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM
[ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM
[ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM
[ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM
[ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM
[ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM
[ 0.000000] #46 [00017a3600 - 00017a3608] BOOTMEM
[ 0.000000] #47 [00017a3640 - 00017a3648] BOOTMEM
[ 0.000000] #48 [00017a3680 - 00017a36b0] BOOTMEM
[ 0.000000] #49 [00017a36c0 - 00017a3720] BOOTMEM
[ 0.000000] #50 [00017a3740 - 00017a3850] BOOTMEM
[ 0.000000] #51 [00017a3880 - 00017a38c8] BOOTMEM
[ 0.000000] #52 [00017a3900 - 00017a3948] BOOTMEM
[ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM
[ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM
[ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM
[ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM
[ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM
[ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM
[ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 12302060k/13631488k available (3665k kernel code, 1057732k absent, 271696k reserved, 2924k data, 476k init)
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3337.212 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6674.42 BogoMIPS (lpj=3337212)
[ 0.000294] Security Framework initialized
[ 0.000432] Mount-cache hash table entries: 256
[ 0.000638] CPU: Physical Processor ID: 0
[ 0.000763] CPU: Processor Core ID: 0
[ 0.000890] mce: CPU supports 9 MCE banks
[ 0.001025] CPU0: Thermal monitoring enabled (TM1)
[ 0.001158] using mwait in idle threads.
[ 0.001290] Performance Events: Westmere events, Intel PMU driver.
[ 0.001470] ... version: 3
[ 0.001594] ... bit width: 48
[ 0.001718] ... generic registers: 4
[ 0.001844] ... value mask: 0000ffffffffffff
[ 0.001970] ... max period: 000000007fffffff
[ 0.002097] ... fixed-purpose events: 3
[ 0.002228] ... event mask: 000000070000000f
[ 0.002375] Freeing SMP alternatives: 36k freed
[ 0.002505] ACPI: Core revision 20100121
[ 0.041981] Setting APIC routing to physical flat
[ 0.042547] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056632] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
[ 0.163788] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
[ 1.203984] Brought up 12 CPUs
[ 1.204108] Total of 12 processors activated (81161.06 BogoMIPS).
[ 1.210623] NET: Registered protocol family 16
[ 1.213504] ACPI: bus type pci registered
[ 1.213685] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.213912] PCI: not using MMCONFIG
[ 1.214036] PCI: Using configuration type 1 for base access
[ 1.216086] bio: create slab <bio-0> at 0
[ 1.217404] ACPI: EC: Look up EC in DSDT
[ 1.218519] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.298129] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.298954] ACPI: Interpreter enabled
[ 1.299077] ACPI: (supports S0 S5)
[ 1.299254] ACPI: Using IOAPIC for interrupt routing
[ 1.299419] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.301211] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.330871] ACPI: No dock devices found.
[ 1.330997] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.331326] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.331673] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.331801] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.331930] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.332151] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.332372] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.332596] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.332859] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.332862] pci 0000:00:00.0: PME# disabled
[ 1.332904] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.332906] pci 0000:00:01.0: PME# disabled
[ 1.332948] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.332951] pci 0000:00:03.0: PME# disabled
[ 1.332994] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.332996] pci 0000:00:07.0: PME# disabled
[ 1.333165] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
[ 1.333217] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
[ 1.333270] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
[ 1.333322] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 1.333367] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.333370] pci 0000:00:1a.7: PME# disabled
[ 1.333397] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 1.333430] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.333433] pci 0000:00:1b.0: PME# disabled
[ 1.333483] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.333486] pci 0000:00:1c.0: PME# disabled
[ 1.333539] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.333541] pci 0000:00:1c.2: PME# disabled
[ 1.333596] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.333599] pci 0000:00:1c.4: PME# disabled
[ 1.333651] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.333654] pci 0000:00:1c.5: PME# disabled
[ 1.333693] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
[ 1.333747] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
[ 1.333799] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
[ 1.333850] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 1.333895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.333899] pci 0000:00:1d.7: PME# disabled
[ 1.333993] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 1.334216] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.334346] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.334609] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
[ 1.334613] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
[ 1.334617] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
[ 1.334621] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
[ 1.334625] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
[ 1.334629] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
[ 1.334665] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 1.334675] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.334704] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
[ 1.334708] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
[ 1.334712] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
[ 1.334716] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
[ 1.334721] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
[ 1.334725] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
[ 1.334774] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.334901] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.334904] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.334907] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.334934] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.335060] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.335063] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.335066] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.335107] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.335114] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[ 1.335118] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
[ 1.335124] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[ 1.335138] pci 0000:03:00.0: supports D1 D2
[ 1.335160] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[ 1.335187] pci 0000:03:00.1: supports D1 D2
[ 1.335198] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.335324] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.335327] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.335330] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.335362] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.335489] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.335492] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.335496] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.335561] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.335568] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.335592] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.335627] pci 0000:06:00.0: supports D1 D2
[ 1.335628] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.335632] pci 0000:06:00.0: PME# disabled
[ 1.335642] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.335769] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.335771] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.335776] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.335873] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 1.335907] pci 0000:05:00.0: PME# supported from D3hot
[ 1.335911] pci 0000:05:00.0: PME# disabled
[ 1.335951] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.335958] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
[ 1.335965] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
[ 1.335973] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.335980] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.336033] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.336160] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.336162] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.336167] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.336231] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 1.336238] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.336260] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 1.336295] pci 0000:04:00.0: supports D1 D2
[ 1.336297] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.336300] pci 0000:04:00.0: PME# disabled
[ 1.336310] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.336436] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.336439] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.336443] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.336481] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 1.336487] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
[ 1.336523] pci 0000:08:02.0: supports D2
[ 1.336525] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 1.336528] pci 0000:08:02.0: PME# disabled
[ 1.336564] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.336695] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.336698] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.336702] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.336704] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.336705] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.336707] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.336708] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.336710] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.336711] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.336735] pci_bus 0000:00: on NUMA node 0
[ 1.336738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.336969] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.337045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.337090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.337134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.337186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.337228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.337271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.337313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.357707] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.358191] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.358475] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.358962] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.359445] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.359931] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.360413] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.360898] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.361477] SCSI subsystem initialized
[ 1.361710] libata version 3.00 loaded.
[ 1.361793] usbcore: registered new interface driver usbfs
[ 1.361936] usbcore: registered new interface driver hub
[ 1.362084] usbcore: registered new device driver usb
[ 1.362316] PCI: Using ACPI for IRQ routing
[ 1.362441] PCI: pci_cache_line_size set to 64 bytes
[ 1.362526] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.362528] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.362598] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.362847] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.364985] Switching to clocksource tsc
[ 1.365485] pnp: PnP ACPI init
[ 1.365613] ACPI: bus type pnp registered
[ 1.368146] pnp: PnP ACPI: found 17 devices
[ 1.368270] ACPI: ACPI bus type pnp unregistered
[ 1.368399] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.368527] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.368658] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.368786] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.368914] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.369041] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.369171] system 00:07: [io 0x0290-0x029f] has been reserved
[ 1.369299] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.369426] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.369553] system 00:08: [io 0x0500-0x057f] could not be reserved
[ 1.369682] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.369809] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.369936] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.370066] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.370195] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.370323] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.370452] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.370583] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.370711] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.370839] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.370967] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.371095] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.375812] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.375941] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.376162] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.376383] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.376606] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.376733] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.376858] pci 0000:00:01.0: bridge window [io disabled]
[ 1.376985] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.377111] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.377239] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.377364] pci 0000:00:03.0: bridge window [io disabled]
[ 1.377491] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.377619] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.377748] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.377873] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.378002] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.378130] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.378352] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.378478] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.378608] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.378737] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.378960] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.379085] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.379214] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.379342] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.379568] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.379694] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.379822] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.379951] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.380174] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.380300] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.380428] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.380559] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.380783] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.380908] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.381037] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.381165] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.381300] pci 0000:00:01.0: setting latency timer to 64
[ 1.381305] pci 0000:00:03.0: setting latency timer to 64
[ 1.381310] pci 0000:00:07.0: setting latency timer to 64
[ 1.381315] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.381444] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.381575] pci 0000:00:1c.0: setting latency timer to 64
[ 1.381582] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.381711] pci 0000:00:1c.2: setting latency timer to 64
[ 1.381716] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.381845] pci 0000:00:1c.4: setting latency timer to 64
[ 1.381851] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.381980] pci 0000:00:1c.5: setting latency timer to 64
[ 1.381984] pci 0000:00:1e.0: setting latency timer to 64
[ 1.381987] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.381988] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.381989] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.381991] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.381992] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.381993] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.381995] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 1.381996] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.381997] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.381999] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.382000] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.382001] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.382002] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.382004] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.382005] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.382006] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.382007] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.382009] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.382010] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.382011] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.382013] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.382014] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 1.382015] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.382016] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.382018] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.382019] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.382020] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.382021] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.382023] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.382062] NET: Registered protocol family 2
[ 1.382235] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.382910] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.383590] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.383820] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.383947] TCP reno registered
[ 1.384071] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.384231] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.384472] NET: Registered protocol family 1
[ 1.384743] RPC: Registered udp transport module.
[ 1.384867] RPC: Registered tcp transport module.
[ 1.384991] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.385253] pci 0000:03:00.0: Boot video device
[ 1.385266] PCI: CLS 256 bytes, default 64
[ 1.385291] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.385419] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
[ 1.385642] software IO TLB at phys 0xe000000 - 0x12000000
[ 1.387859] VFS: Disk quotas dquot_6.5.2
[ 1.388001] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.388386] NTFS driver 2.1.29 [Flags: R/W].
[ 1.388551] fuse init (API version 7.13)
[ 1.388724] msgmni has been set to 24027
[ 1.389042] alg: No test for stdrng (krng)
[ 1.389194] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.389415] io scheduler noop registered
[ 1.389540] io scheduler deadline registered
[ 1.389678] io scheduler cfq registered (default)
[ 1.389866] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.389890] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.389952] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.389974] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.390033] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.390055] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.390116] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.390143] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.390225] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.390252] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.390332] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.390360] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.390441] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.390469] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.390569] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.390573] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.390576] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.392054] Non-volatile memory driver v1.3
[ 1.392268] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.392495] ACPI: Power Button [PWRB]
[ 1.392651] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.392872] ACPI: Power Button [PWRF]
[ 1.393495] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.394749] brd: module loaded
[ 1.395291] loop: module loaded
[ 1.395415] Uniform Multi-Platform E-IDE driver
[ 1.395570] ide-gd driver 1.18
[ 1.395812] ahci 0000:05:00.0: version 3.0
[ 1.395825] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.406141] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.406373] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.409133] ahci 0000:05:00.0: setting latency timer to 64
[ 1.409213] scsi0 : ahci
[ 1.409412] scsi1 : ahci
[ 1.409605] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.409827] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.410087] ata_piix 0000:00:1f.2: version 2.13
[ 1.410096] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.410226] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.410496] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.410527] scsi2 : ata_piix
[ 1.410707] scsi3 : ata_piix
[ 1.412084] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[ 1.412214] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[ 1.412357] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.412488] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.412754] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.412774] scsi4 : ata_piix
[ 1.412953] scsi5 : ata_piix
[ 1.414137] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[ 1.414266] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[ 1.414478] console [netcon0] enabled
[ 1.414601] netconsole: network logging started
[ 1.414782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.414920] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.415055] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.415057] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.415223] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.415463] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.419459] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.419468] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.429052] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.429198] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.429328] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.429548] usb usb1: Product: EHCI Host Controller
[ 1.429672] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.429799] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.429993] hub 1-0:1.0: USB hub found
[ 1.430118] hub 1-0:1.0: 6 ports detected
[ 1.430281] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.430416] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.430418] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.430575] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.430811] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.434798] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.434807] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.444011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.444152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.444281] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.444500] usb usb2: Product: EHCI Host Controller
[ 1.444624] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.444751] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.444940] hub 2-0:1.0: USB hub found
[ 1.445064] hub 2-0:1.0: 6 ports detected
[ 1.445241] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.445389] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.445532] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.445662] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.445664] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.445824] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.446063] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.446210] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.446338] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.446558] usb usb3: Product: UHCI Host Controller
[ 1.446682] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.446808] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.446999] hub 3-0:1.0: USB hub found
[ 1.447124] hub 3-0:1.0: 2 ports detected
[ 1.447278] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.447409] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.447411] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.447569] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.447813] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.447956] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.448084] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.448306] usb usb4: Product: UHCI Host Controller
[ 1.448431] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.448558] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.448746] hub 4-0:1.0: USB hub found
[ 1.448871] hub 4-0:1.0: 2 ports detected
[ 1.449022] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.449152] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.449154] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.449314] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.449559] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.449703] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.449830] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.450050] usb usb5: Product: UHCI Host Controller
[ 1.450174] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.450304] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.450494] hub 5-0:1.0: USB hub found
[ 1.450618] hub 5-0:1.0: 2 ports detected
[ 1.450769] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.450900] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.450902] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.451059] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.451300] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.451444] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.451571] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.451791] usb usb6: Product: UHCI Host Controller
[ 1.451915] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.452042] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.452232] hub 6-0:1.0: USB hub found
[ 1.452357] hub 6-0:1.0: 2 ports detected
[ 1.452509] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.452640] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.452642] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.452798] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.453038] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.453181] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.453312] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.453532] usb usb7: Product: UHCI Host Controller
[ 1.453656] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.453783] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.453972] hub 7-0:1.0: USB hub found
[ 1.454096] hub 7-0:1.0: 2 ports detected
[ 1.454248] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.454379] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.454381] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.454539] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.454777] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.454921] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.455049] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.455271] usb usb8: Product: UHCI Host Controller
[ 1.455396] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.455522] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.455711] hub 8-0:1.0: USB hub found
[ 1.455836] hub 8-0:1.0: 2 ports detected
[ 1.456002] Initializing USB Mass Storage driver...
[ 1.456164] usbcore: registered new interface driver usb-storage
[ 1.456293] USB Mass Storage support registered.
[ 1.456453] usbcore: registered new interface driver libusual
[ 1.456631] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.458322] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.458450] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.458626] mice: PS/2 mouse device common for all mice
[ 1.458854] i2c /dev entries driver
[ 1.459019] md: raid0 personality registered for level 0
[ 1.459145] md: raid1 personality registered for level 1
[ 1.459360] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.459583] cpuidle: using governor ladder
[ 1.459707] cpuidle: using governor menu
[ 1.459946] usbcore: registered new interface driver hiddev
[ 1.460098] usbcore: registered new interface driver usbhid
[ 1.460224] usbhid: USB HID core driver
[ 1.460505] TCP cubic registered
[ 1.460628] NET: Registered protocol family 17
[ 1.461144] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.476326] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.713573] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.714364] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.048355] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.119150] ata4.01: link resume succeeded after 1 retries
[ 2.119153] ata3.01: link resume succeeded after 1 retries
[ 2.209179] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.209315] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.209444] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
[ 2.209571] usb 3-2: Manufacturer: American Power Conversion
[ 2.209698] usb 3-2: SerialNumber: 3B1007X44377
[ 2.231949] ata5: SATA link down (SStatus 0 SControl 301)
[ 2.293060] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
[ 2.359558] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.362760] ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.362897] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.368768] ata6.00: configured for UDMA/133
[ 2.371534] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.371677] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.377564] ata3.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
[ 2.377855] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.377991] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.382475] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.382617] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.383553] ata3.00: configured for UDMA/100
[ 2.389713] ata3.01: configured for UDMA/133
[ 2.392540] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.392668] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.392982] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.393127] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.393325] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
[ 2.397551] ata4.00: configured for UDMA/133
[ 2.400690] ata4.01: configured for UDMA/133
[ 2.403253] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.403484] Uniform CD-ROM driver Revision: 3.20
[ 2.403680] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.403735] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.403929] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.404261] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.404288] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.404362] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.404463] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.404488] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.404490] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.404498] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.404500] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.404572] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.404577] sdb:
[ 2.404696] sd 3:0:1:0: Attached scsi generic sg3 type 0
[ 2.404756] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.404848] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.404872] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.404873] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.404883] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2.404885] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.404949] sdd:
[ 2.406959] sd 2:0:1:0: [sda] Write Protect is off
[ 2.407200] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.407211] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.407499] sda: sdb1 sdb2 sdb3 sdb4 < sdd1
[ 2.409099] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 2.418507] sdb5
[ 2.418601] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.421379] sda1 sda2 sda3 sda4 < sda5 sdb6 >
[ 2.439819] sda6 >
[ 2.450321] sd 3:0:1:0: [sdc] Write Protect is off
[ 2.450450] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.450469] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.450666] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.450892] sdc:
[ 2.452759] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.462946] sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
[ 2.498109] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.501060] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 2.667691] usb 8-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.667828] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.667956] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.668085] usb 8-2: Manufacturer: Microsoft
[ 2.685797] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.686101] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 4.579303] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.586802] md: Waiting for all devices to be available before autodetect
[ 4.586938] md: If you don't use raid, use raid=noautodetect
[ 4.587153] md: Autodetecting RAID arrays.
[ 4.641503] md: Scanned 6 and added 6 devices.
[ 4.641634] md: autorun ...
[ 4.641756] md: considering sdc5 ...
[ 4.641880] md: adding sdc5 ...
[ 4.642003] md: sdc3 has different UUID to sdc5
[ 4.642129] md: adding sda5 ...
[ 4.642254] md: sda3 has different UUID to sdc5
[ 4.642380] md: adding sdb5 ...
[ 4.642503] md: sdb3 has different UUID to sdc5
[ 4.642709] md: created md5
[ 4.642831] md: bind<sdb5>
[ 4.642956] md: bind<sda5>
[ 4.643081] md: bind<sdc5>
[ 4.643208] md: running: <sdc5><sda5><sdb5>
[ 4.643502] raid1: raid set md5 active with 3 out of 3 mirrors
[ 4.643640] md5: detected capacity change from 0 to 53694496768
[ 4.643787] md: considering sdc3 ...
[ 4.643911] md: adding sdc3 ...
[ 4.644034] md: adding sda3 ...
[ 4.644158] md: adding sdb3 ...
[ 4.644357] md: created md3
[ 4.644480] md: bind<sdb3>
[ 4.644606] md: bind<sda3>
[ 4.644731] md: bind<sdc3>
[ 4.644855] md: running: <sdc3><sda3><sdb3>
[ 4.645139] raid1: raid set md3 active with 3 out of 3 mirrors
[ 4.645278] md3: detected capacity change from 0 to 53694562304
[ 4.645425] md: ... autorun DONE.
[ 4.645580] md5: unknown partition table
[ 4.688185] kjournald starting. Commit interval 5 seconds
[ 4.688191] EXT3-fs (md5): mounted filesystem with writeback data mode
[ 4.688201] VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
[ 4.688577] Freeing unused kernel memory: 476k freed
[ 4.688757] Write protecting the kernel read-only data: 6144k
[ 4.688963] Freeing unused kernel memory: 412k freed
[ 4.689158] Freeing unused kernel memory: 224k freed
[ 6.396275] udev: starting version 149
[ 6.499541] md3:
[ 6.505089] rtc_cmos 00:03: RTC can wake from S4
[ 6.505120] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.505143] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.507808] unknown partition table
[ 6.590707] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.590710] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f disabled]
[ 6.590712] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.696653] sky2: driver version 1.27
[ 6.696675] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.696686] sky2 0000:06:00.0: setting latency timer to 64
[ 6.696718] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.696803] sky2 0000:06:00.0: irq 55 for MSI/MSI-X
[ 6.696973] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
[ 6.696985] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.696992] sky2 0000:04:00.0: setting latency timer to 64
[ 6.697008] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.697088] sky2 0000:04:00.0: irq 56 for MSI/MSI-X
[ 6.697244] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
[ 6.831794] Linux agpgart interface v0.103
[ 6.863019] [drm] Initialized drm 1.1.0 20060810
[ 7.069605] [drm] radeon defaulting to kernel modesetting.
[ 7.069608] [drm] radeon kernel modesetting enabled.
[ 7.069643] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 7.069646] radeon 0000:03:00.0: setting latency timer to 64
[ 7.070351] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[ 7.070992] [drm] register mmio base: 0xFBAC0000
[ 7.070994] [drm] register mmio size: 131072
[ 7.071060] ATOM BIOS: JUNIPER
[ 7.071069] [drm] Clocks initialized !
[ 7.071070] [drm] 1 Power State(s)
[ 7.071071] [drm] State 0 Default (default)
[ 7.071072] [drm] 16 PCIE Lanes
[ 7.071072] [drm] 1 Clock Mode(s)
[ 7.071073] [drm] 0 engine/memory: 850000/1200000
[ 7.071078] [drm] radeon: power management initialized
[ 7.071084] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 7.071086] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 7.071096] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 7.071097] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.071098] [drm] RAM width 128bits DDR
[ 7.071118] [TTM] Zone kernel: Available graphics memory: 6151604 kiB.
[ 7.071119] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 7.071126] [drm] radeon: 256M of VRAM memory ready
[ 7.071127] [drm] radeon: 512M of GTT memory ready.
[ 7.072468] [drm] Radeon Display Connectors
[ 7.072470] [drm] Connector 0:
[ 7.072471] [drm] DisplayPort
[ 7.072472] [drm] HPD4
[ 7.072474] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 7.072476] [drm] Encoders:
[ 7.072477] [drm] DFP1: INTERNAL_UNIPHY2
[ 7.072479] [drm] Connector 1:
[ 7.072480] [drm] HDMI-A
[ 7.072481] [drm] HPD5
[ 7.072483] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 7.072484] [drm] Encoders:
[ 7.072486] [drm] DFP2: INTERNAL_UNIPHY2
[ 7.072487] [drm] Connector 2:
[ 7.072489] [drm] DVI-I
[ 7.072490] [drm] HPD1
[ 7.072492] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 7.072494] [drm] Encoders:
[ 7.072495] [drm] DFP3: INTERNAL_UNIPHY1
[ 7.072496] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.072498] [drm] Connector 3:
[ 7.072499] [drm] DVI-I
[ 7.072500] [drm] HPD6
[ 7.072502] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 7.072504] [drm] Encoders:
[ 7.072505] [drm] DFP4: INTERNAL_UNIPHY
[ 7.072507] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.123470] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.123512] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 7.123534] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.422241] [drm] fb mappable at 0xD0040000
[ 7.422243] [drm] vram apper at 0xD0000000
[ 7.422244] [drm] size 8294400
[ 7.422245] [drm] fb depth is 24
[ 7.422246] [drm] pitch is 7680
[ 7.430854] Console: switching to colour frame buffer device 240x67
[ 7.434826] fb0: radeondrmfb frame buffer device
[ 7.434827] registered panic notifier
[ 7.434831] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
[ 7.505452] hda_codec: AD1989B: BIOS auto-probing.
[ 7.507737] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 7.507780] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
[ 7.507797] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 8.961840] EXT3-fs (md5): using internal journal
[ 9.253884] md: md11 stopped.
[ 9.285670] md: bind<sdd1>
[ 9.297473] md: md6 stopped.
[ 9.299607] md: bind<sdb6>
[ 9.301256] md: bind<sdc6>
[ 9.301440] md: bind<sda6>
[ 9.301997] raid1: raid set md6 active with 3 out of 3 mirrors
[ 9.302009] md6: detected capacity change from 0 to 253354939392
[ 9.302482] md6: unknown partition table
[ 9.707338] EXT3-fs (md11): error: unable to read superblock
[ 9.738406] kjournald starting. Commit interval 5 seconds
[ 9.738410] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 9.764247] EXT3-fs (md6): using internal journal
[ 9.764252] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 9.833944] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 9.835227] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 9.849174] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 15.188746] sky2 0000:06:00.0: eth0: enabling interface
[ 17.142821] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 23.699296] NET: Registered protocol family 10
[ 26.019554] /dev/vmmon[4167]: Module vmmon: registered with major=10 minor=165
[ 26.019563] /dev/vmmon[4167]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 26.019568] /dev/vmmon[4167]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 26.019570] /dev/vmmon[4167]: Module vmmon: initialized
[ 26.091421] /dev/vmci[4186]: VMCI: Driver initialized.
[ 26.091442] /dev/vmci[4186]: Module vmci: registered with major=10 minor=59
[ 26.091444] /dev/vmci[4186]: Module vmci: initialized
[ 26.380369] /dev/vmnet: open called by PID 4268 (vmnet-bridge)
[ 26.380376] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 26.380395] /dev/vmnet: port on hub 0 successfully opened
[ 26.380406] bridge-eth0: up
[ 26.380408] bridge-eth0: attached
[ 27.590868] /dev/vmnet: open called by PID 4275 (vmnet-dhcpd)
[ 27.590873] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 27.590892] /dev/vmnet: port on hub 1 successfully opened
[ 27.656431] /dev/vmnet: open called by PID 4277 (vmnet-netifup)
[ 27.656440] /dev/vmnet: port on hub 1 successfully opened
[ 27.696350] /dev/vmnet: open called by PID 4280 (vmnet-dhcpd)
[ 27.696355] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 27.696374] /dev/vmnet: port on hub 8 successfully opened
[ 27.804340] /dev/vmnet: open called by PID 4284 (vmnet-natd)
[ 27.804346] /dev/vmnet: port on hub 8 successfully opened
[ 27.809048] /dev/vmnet: open called by PID 4285 (vmnet-netifup)
[ 27.809055] /dev/vmnet: port on hub 8 successfully opened
[ 34.300792] eth0: no IPv6 routers present
[ 38.088802] vmnet8: no IPv6 routers present
[ 38.385003] vmnet1: no IPv6 routers present
[-- Attachment #3: dmesg.AllDrivesFound --]
[-- Type: application/octet-stream, Size: 62912 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #2 SMP PREEMPT Sat Jul 3 09:21:09 PDT 2010
[ 0.000000] Command line: root=/dev/md5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 1G
[ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000
[ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143439
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 12
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] early_res array is doubled to 64 at [14000 - 147ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
[ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
[ 0.000000] Kernel command line: root=/dev/md5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] early_res array is doubled to 128 at [14800 - 157ff]
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (60 early reservations)
[ 0.000000] #1 [0001000000 - 0001771244] TEXT DATA BSS
[ 0.000000] #2 [0001772000 - 0001772298] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved
[ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM
[ 0.000000] #11 [0001771280 - 0001771880] BOOTMEM
[ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM
[ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM
[ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0
[ 0.000000] #15 [0001771880 - 0001771a00] BOOTMEM
[ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM
[ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM
[ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM
[ 0.000000] #19 [0001771a00 - 0001771a41] BOOTMEM
[ 0.000000] #20 [0001771a80 - 0001771b06] BOOTMEM
[ 0.000000] #21 [0001771b40 - 0001771da8] BOOTMEM
[ 0.000000] #22 [0001771dc0 - 0001771e28] BOOTMEM
[ 0.000000] #23 [0001771e40 - 0001771ea8] BOOTMEM
[ 0.000000] #24 [0001771ec0 - 0001771f28] BOOTMEM
[ 0.000000] #25 [0001771f40 - 0001771fa8] BOOTMEM
[ 0.000000] #26 [00017a32c0 - 00017a3328] BOOTMEM
[ 0.000000] #27 [00017a3340 - 00017a33a8] BOOTMEM
[ 0.000000] #28 [00017a33c0 - 00017a3428] BOOTMEM
[ 0.000000] #29 [00017a3440 - 00017a34a8] BOOTMEM
[ 0.000000] #30 [00017a34c0 - 00017a3528] BOOTMEM
[ 0.000000] #31 [00017a3540 - 00017a35a8] BOOTMEM
[ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM
[ 0.000000] #33 [00017a35c0 - 00017a35ce] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM
[ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM
[ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM
[ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM
[ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM
[ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM
[ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM
[ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM
[ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM
[ 0.000000] #46 [00017a3600 - 00017a3608] BOOTMEM
[ 0.000000] #47 [00017a3640 - 00017a3648] BOOTMEM
[ 0.000000] #48 [00017a3680 - 00017a36b0] BOOTMEM
[ 0.000000] #49 [00017a36c0 - 00017a3720] BOOTMEM
[ 0.000000] #50 [00017a3740 - 00017a3850] BOOTMEM
[ 0.000000] #51 [00017a3880 - 00017a38c8] BOOTMEM
[ 0.000000] #52 [00017a3900 - 00017a3948] BOOTMEM
[ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM
[ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM
[ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM
[ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM
[ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM
[ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM
[ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 12302060k/13631488k available (3665k kernel code, 1057732k absent, 271696k reserved, 2924k data, 476k init)
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3337.808 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6675.61 BogoMIPS (lpj=3337808)
[ 0.000297] Security Framework initialized
[ 0.000437] Mount-cache hash table entries: 256
[ 0.000642] CPU: Physical Processor ID: 0
[ 0.000768] CPU: Processor Core ID: 0
[ 0.000897] mce: CPU supports 9 MCE banks
[ 0.001033] CPU0: Thermal monitoring enabled (TM1)
[ 0.001168] using mwait in idle threads.
[ 0.001301] Performance Events: Westmere events, Intel PMU driver.
[ 0.001483] ... version: 3
[ 0.001609] ... bit width: 48
[ 0.001734] ... generic registers: 4
[ 0.001860] ... value mask: 0000ffffffffffff
[ 0.001988] ... max period: 000000007fffffff
[ 0.002116] ... fixed-purpose events: 3
[ 0.002248] ... event mask: 000000070000000f
[ 0.002396] Freeing SMP alternatives: 36k freed
[ 0.002527] ACPI: Core revision 20100121
[ 0.041735] Setting APIC routing to physical flat
[ 0.042303] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052408] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
[ 0.159795] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
[ 1.199999] Brought up 12 CPUs
[ 1.200125] Total of 12 processors activated (81295.74 BogoMIPS).
[ 1.206642] NET: Registered protocol family 16
[ 1.209595] ACPI: bus type pci registered
[ 1.209778] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.210009] PCI: not using MMCONFIG
[ 1.210133] PCI: Using configuration type 1 for base access
[ 1.212199] bio: create slab <bio-0> at 0
[ 1.213521] ACPI: EC: Look up EC in DSDT
[ 1.214637] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.300195] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.301023] ACPI: Interpreter enabled
[ 1.301148] ACPI: (supports S0 S5)
[ 1.301326] ACPI: Using IOAPIC for interrupt routing
[ 1.301493] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.303293] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.327991] ACPI: No dock devices found.
[ 1.328117] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.328448] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.328797] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.328927] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.329057] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.329281] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.329505] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.329731] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.329996] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.329999] pci 0000:00:00.0: PME# disabled
[ 1.330041] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.330043] pci 0000:00:01.0: PME# disabled
[ 1.330085] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.330087] pci 0000:00:03.0: PME# disabled
[ 1.330131] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.330133] pci 0000:00:07.0: PME# disabled
[ 1.330302] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
[ 1.330354] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
[ 1.330407] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
[ 1.330459] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 1.330504] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.330507] pci 0000:00:1a.7: PME# disabled
[ 1.330535] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 1.330569] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.330571] pci 0000:00:1b.0: PME# disabled
[ 1.330622] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.330625] pci 0000:00:1c.0: PME# disabled
[ 1.330680] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.330683] pci 0000:00:1c.2: PME# disabled
[ 1.330736] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.330738] pci 0000:00:1c.4: PME# disabled
[ 1.330791] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.330794] pci 0000:00:1c.5: PME# disabled
[ 1.330833] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
[ 1.330886] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
[ 1.330938] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
[ 1.330991] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 1.331036] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.331039] pci 0000:00:1d.7: PME# disabled
[ 1.331134] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 1.331360] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.331491] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.331757] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
[ 1.331762] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
[ 1.331766] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
[ 1.331770] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
[ 1.331774] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
[ 1.331778] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
[ 1.331814] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 1.331824] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.331854] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
[ 1.331858] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
[ 1.331862] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
[ 1.331866] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
[ 1.331870] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
[ 1.331874] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
[ 1.331924] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.332052] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.332055] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.332058] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332085] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.332213] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.332215] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.332219] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332260] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.332266] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[ 1.332270] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
[ 1.332277] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[ 1.332291] pci 0000:03:00.0: supports D1 D2
[ 1.332313] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[ 1.332340] pci 0000:03:00.1: supports D1 D2
[ 1.332351] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.332479] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.332481] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.332485] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.332517] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.332646] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.332649] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.332653] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.332720] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.332727] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.332749] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.332784] pci 0000:06:00.0: supports D1 D2
[ 1.332785] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.332789] pci 0000:06:00.0: PME# disabled
[ 1.332799] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.332927] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.332930] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.332934] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.333032] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 1.333066] pci 0000:05:00.0: PME# supported from D3hot
[ 1.333070] pci 0000:05:00.0: PME# disabled
[ 1.333109] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.333117] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
[ 1.333124] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
[ 1.333131] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.333139] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.333191] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.333319] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.333322] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.333326] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.333391] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 1.333398] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.333420] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 1.333455] pci 0000:04:00.0: supports D1 D2
[ 1.333457] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.333460] pci 0000:04:00.0: PME# disabled
[ 1.333470] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.333599] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.333601] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.333606] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.333644] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 1.333650] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
[ 1.333688] pci 0000:08:02.0: supports D2
[ 1.333689] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 1.333693] pci 0000:08:02.0: PME# disabled
[ 1.333728] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.333860] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.333862] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.333866] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.333868] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.333869] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.333871] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.333872] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.333874] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.333875] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.333900] pci_bus 0000:00: on NUMA node 0
[ 1.333903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.334133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.334208] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.334253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.334297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.334349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.334391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.334434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.334476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.354856] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.355344] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.355632] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.356118] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.356607] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.357092] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.357578] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.358065] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.358648] SCSI subsystem initialized
[ 1.358879] libata version 3.00 loaded.
[ 1.358961] usbcore: registered new interface driver usbfs
[ 1.359106] usbcore: registered new interface driver hub
[ 1.359256] usbcore: registered new device driver usb
[ 1.359490] PCI: Using ACPI for IRQ routing
[ 1.359618] PCI: pci_cache_line_size set to 64 bytes
[ 1.359701] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.359702] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.359772] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.360023] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.362163] Switching to clocksource tsc
[ 1.362666] pnp: PnP ACPI init
[ 1.362792] ACPI: bus type pnp registered
[ 1.365319] pnp: PnP ACPI: found 17 devices
[ 1.365444] ACPI: ACPI bus type pnp unregistered
[ 1.365578] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.365707] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.365836] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.365964] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.366093] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.366222] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.366353] system 00:07: [io 0x0290-0x029f] has been reserved
[ 1.366483] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.366613] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.366740] system 00:08: [io 0x0500-0x057f] could not be reserved
[ 1.366869] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.366998] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.367126] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.367257] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.367387] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.367517] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.367649] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.367779] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.367909] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.368037] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.368167] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.368296] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.373016] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.373145] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.373369] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.373595] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.373819] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.373946] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.374072] pci 0000:00:01.0: bridge window [io disabled]
[ 1.374200] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.374328] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.374458] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.374586] pci 0000:00:03.0: bridge window [io disabled]
[ 1.374715] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.374842] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.374972] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.375099] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.375228] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.375357] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.375585] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.375712] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.375841] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.375972] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.376198] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.376324] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.376454] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.376586] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.376812] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.376939] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.377068] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.377198] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.377424] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.377553] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.377682] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.377812] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.378038] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.378164] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.378294] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.378423] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.378561] pci 0000:00:01.0: setting latency timer to 64
[ 1.378566] pci 0000:00:03.0: setting latency timer to 64
[ 1.378572] pci 0000:00:07.0: setting latency timer to 64
[ 1.378577] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.378707] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.378837] pci 0000:00:1c.0: setting latency timer to 64
[ 1.378844] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.378974] pci 0000:00:1c.2: setting latency timer to 64
[ 1.378979] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.379109] pci 0000:00:1c.4: setting latency timer to 64
[ 1.379116] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.379245] pci 0000:00:1c.5: setting latency timer to 64
[ 1.379250] pci 0000:00:1e.0: setting latency timer to 64
[ 1.379252] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.379253] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.379254] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.379256] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.379257] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.379258] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.379260] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 1.379261] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.379262] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.379264] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.379265] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.379266] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.379268] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.379269] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.379270] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.379271] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.379273] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.379274] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.379275] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.379276] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.379278] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.379279] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 1.379280] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.379282] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.379283] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.379284] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.379285] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.379286] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.379288] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.379328] NET: Registered protocol family 2
[ 1.379504] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.380180] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.380864] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.381097] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.381226] TCP reno registered
[ 1.381350] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.381513] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.381760] NET: Registered protocol family 1
[ 1.382029] RPC: Registered udp transport module.
[ 1.382154] RPC: Registered tcp transport module.
[ 1.382279] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.382547] pci 0000:03:00.0: Boot video device
[ 1.382561] PCI: CLS 256 bytes, default 64
[ 1.382587] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.382716] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
[ 1.382939] software IO TLB at phys 0xe000000 - 0x12000000
[ 1.385121] VFS: Disk quotas dquot_6.5.2
[ 1.385264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.385655] NTFS driver 2.1.29 [Flags: R/W].
[ 1.385818] fuse init (API version 7.13)
[ 1.385993] msgmni has been set to 24027
[ 1.386313] alg: No test for stdrng (krng)
[ 1.386468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.386694] io scheduler noop registered
[ 1.386818] io scheduler deadline registered
[ 1.386957] io scheduler cfq registered (default)
[ 1.387146] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.387169] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.387233] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.387255] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.387316] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.387338] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.387400] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.387427] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.387515] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.387543] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.387626] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.387654] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.387735] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.387762] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.387859] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.387863] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.387866] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.389342] Non-volatile memory driver v1.3
[ 1.389564] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.389790] ACPI: Power Button [PWRB]
[ 1.389949] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.390172] ACPI: Power Button [PWRF]
[ 1.390803] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.392043] brd: module loaded
[ 1.392582] loop: module loaded
[ 1.392705] Uniform Multi-Platform E-IDE driver
[ 1.392864] ide-gd driver 1.18
[ 1.393112] ahci 0000:05:00.0: version 3.0
[ 1.393124] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.403326] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.403560] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.406340] ahci 0000:05:00.0: setting latency timer to 64
[ 1.406423] scsi0 : ahci
[ 1.406624] scsi1 : ahci
[ 1.406820] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.407044] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.407308] ata_piix 0000:00:1f.2: version 2.13
[ 1.407317] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.407448] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.407720] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.407753] scsi2 : ata_piix
[ 1.407938] scsi3 : ata_piix
[ 1.409322] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[ 1.409454] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[ 1.409599] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.409732] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.410001] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.410022] scsi4 : ata_piix
[ 1.410201] scsi5 : ata_piix
[ 1.411391] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[ 1.411524] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[ 1.411733] console [netcon0] enabled
[ 1.411857] netconsole: network logging started
[ 1.412037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.412177] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.412313] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.412316] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.412480] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.412719] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.416724] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.416735] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.426240] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.426386] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.426517] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.426740] usb usb1: Product: EHCI Host Controller
[ 1.426865] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.426993] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.427185] hub 1-0:1.0: USB hub found
[ 1.427310] hub 1-0:1.0: 6 ports detected
[ 1.427475] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.427611] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.427613] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.427770] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.428009] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.432003] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.432012] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.441202] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.441344] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.441475] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.441698] usb usb2: Product: EHCI Host Controller
[ 1.441824] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.441951] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.442139] hub 2-0:1.0: USB hub found
[ 1.442265] hub 2-0:1.0: 6 ports detected
[ 1.442440] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.442588] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.442732] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.442864] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.442866] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.443026] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.443268] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.443417] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.443545] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.443768] usb usb3: Product: UHCI Host Controller
[ 1.443893] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.444021] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.444209] hub 3-0:1.0: USB hub found
[ 1.444335] hub 3-0:1.0: 2 ports detected
[ 1.444490] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.444622] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.444624] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.444783] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.445028] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.445174] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.445303] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.445528] usb usb4: Product: UHCI Host Controller
[ 1.445654] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.445781] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.445968] hub 4-0:1.0: USB hub found
[ 1.446094] hub 4-0:1.0: 2 ports detected
[ 1.446246] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.446378] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.446380] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.446539] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.446787] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.446932] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.447060] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.447282] usb usb5: Product: UHCI Host Controller
[ 1.447410] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.447538] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.447727] hub 5-0:1.0: USB hub found
[ 1.447853] hub 5-0:1.0: 2 ports detected
[ 1.448005] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.448137] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.448139] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.448296] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.448539] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.448684] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.448813] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.449035] usb usb6: Product: UHCI Host Controller
[ 1.449161] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.449289] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.449478] hub 6-0:1.0: USB hub found
[ 1.449603] hub 6-0:1.0: 2 ports detected
[ 1.449759] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.449891] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.449893] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.450049] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.450290] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.450438] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.450567] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.450790] usb usb7: Product: UHCI Host Controller
[ 1.450916] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.451043] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.451230] hub 7-0:1.0: USB hub found
[ 1.451355] hub 7-0:1.0: 2 ports detected
[ 1.451509] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.451641] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.451644] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.451802] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.452043] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.452188] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.452317] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.452541] usb usb8: Product: UHCI Host Controller
[ 1.452668] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.452795] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.452982] hub 8-0:1.0: USB hub found
[ 1.453107] hub 8-0:1.0: 2 ports detected
[ 1.453273] Initializing USB Mass Storage driver...
[ 1.453438] usbcore: registered new interface driver usb-storage
[ 1.453565] USB Mass Storage support registered.
[ 1.453725] usbcore: registered new interface driver libusual
[ 1.453903] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.455650] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.455779] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.455953] mice: PS/2 mouse device common for all mice
[ 1.456184] i2c /dev entries driver
[ 1.456343] md: raid0 personality registered for level 0
[ 1.456472] md: raid1 personality registered for level 1
[ 1.456686] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.456913] cpuidle: using governor ladder
[ 1.457038] cpuidle: using governor menu
[ 1.457276] usbcore: registered new interface driver hiddev
[ 1.457426] usbcore: registered new interface driver usbhid
[ 1.457553] usbhid: USB HID core driver
[ 1.457834] TCP cubic registered
[ 1.457957] NET: Registered protocol family 17
[ 1.458481] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.473120] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.711531] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.711534] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.715526] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.715666] ata5.00: link online but device misclassifed
[ 1.715668] ata5: link online but 1 devices misclassified, retrying
[ 1.715798] ata5: reset failed (errno=-11), retrying in 10 secs
[ 1.866151] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.869382] ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 1.869520] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.875627] ata6.00: configured for UDMA/133
[ 2.046644] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.168381] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.168399] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.168413] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.168782] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.174487] ata3.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
[ 2.174756] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.174907] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.175113] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.175256] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.175457] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.175586] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.178441] ata3.00: configured for UDMA/100
[ 2.179774] ata4.00: configured for UDMA/133
[ 2.181586] ata3.01: configured for UDMA/133
[ 2.184587] ata4.01: configured for UDMA/133
[ 2.188666] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
[ 2.193591] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.193824] Uniform CD-ROM driver Revision: 3.20
[ 2.194022] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.194077] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.194276] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.194622] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.194647] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.194722] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.194819] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.194844] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.194846] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.194847] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.194857] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.194915] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.194930] sdb:
[ 2.195045] sd 3:0:1:0: Attached scsi generic sg3 type 0
[ 2.196406] sd 2:0:1:0: [sda] Write Protect is off
[ 2.196536] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.196548] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.196836] sda: sdb1 sdb2 sdb3 sdb4 <
[ 2.204488] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.204735] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.204865] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
[ 2.204994] usb 3-2: Manufacturer: American Power Conversion
[ 2.205121] usb 3-2: SerialNumber: 3B1007X44377
[ 2.210598] sda1 sda2 sda3 sda4 < sdb5
[ 2.214568] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.224622] sda5 sdb6 >
[ 2.237351] sda6 >
[ 2.246053] sd 3:0:1:0: [sdc] Write Protect is off
[ 2.246183] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.246201] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.246216] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.246624] sdc:
[ 2.250299] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.255910] sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
[ 2.288276] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
[ 2.294050] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 2.493492] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.662963] usb 8-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.663104] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.663233] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.663363] usb 8-2: Manufacturer: Microsoft
[ 2.681059] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.681367] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 4.574999] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 11.840461] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 11.843698] ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 11.843836] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 11.849705] ata5.00: configured for UDMA/133
[ 11.849878] scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 11.850230] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 11.850372] sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 11.850624] sd 4:0:0:0: [sdd] Write Protect is off
[ 11.850640] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 11.850765] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 11.850809] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 11.850833] sd 5:0:0:0: [sde] Write Protect is off
[ 11.850835] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 11.850845] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.850908] sde:
[ 11.851705] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 11.851833] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.852123] sdd: sde1
[ 11.859879] sd 5:0:0:0: [sde] Attached SCSI disk
[ 11.867949] sdd1
[ 11.868241] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 11.868380] md: Waiting for all devices to be available before autodetect
[ 11.868510] md: If you don't use raid, use raid=noautodetect
[ 11.868716] md: Autodetecting RAID arrays.
[ 11.922779] md: Scanned 6 and added 6 devices.
[ 11.922912] md: autorun ...
[ 11.923035] md: considering sdc5 ...
[ 11.923161] md: adding sdc5 ...
[ 11.923288] md: sdc3 has different UUID to sdc5
[ 11.923414] md: adding sda5 ...
[ 11.923539] md: sda3 has different UUID to sdc5
[ 11.923665] md: adding sdb5 ...
[ 11.923790] md: sdb3 has different UUID to sdc5
[ 11.923995] md: created md5
[ 11.924119] md: bind<sdb5>
[ 11.924248] md: bind<sda5>
[ 11.924374] md: bind<sdc5>
[ 11.924500] md: running: <sdc5><sda5><sdb5>
[ 11.924798] raid1: raid set md5 active with 3 out of 3 mirrors
[ 11.924937] md5: detected capacity change from 0 to 53694496768
[ 11.925086] md: considering sdc3 ...
[ 11.925215] md: adding sdc3 ...
[ 11.925339] md: adding sda3 ...
[ 11.925464] md: adding sdb3 ...
[ 11.925665] md: created md3
[ 11.925788] md: bind<sdb3>
[ 11.925915] md: bind<sda3>
[ 11.926041] md: bind<sdc3>
[ 11.926167] md: running: <sdc3><sda3><sdb3>
[ 11.926459] raid1: raid set md3 active with 3 out of 3 mirrors
[ 11.926598] md3: detected capacity change from 0 to 53694562304
[ 11.926746] md: ... autorun DONE.
[ 11.926902] md5: unknown partition table
[ 11.969463] kjournald starting. Commit interval 5 seconds
[ 11.969469] EXT3-fs (md5): mounted filesystem with writeback data mode
[ 11.969480] VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
[ 11.969859] Freeing unused kernel memory: 476k freed
[ 11.970041] Write protecting the kernel read-only data: 6144k
[ 11.970251] Freeing unused kernel memory: 412k freed
[ 11.970444] Freeing unused kernel memory: 224k freed
[ 13.777441] udev: starting version 149
[ 13.860466] rtc_cmos 00:03: RTC can wake from S4
[ 13.860505] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 13.860530] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 13.969487] sky2: driver version 1.27
[ 13.969517] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 13.969528] sky2 0000:06:00.0: setting latency timer to 64
[ 13.969557] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 13.969640] sky2 0000:06:00.0: irq 55 for MSI/MSI-X
[ 13.969820] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
[ 13.969833] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.969840] sky2 0000:04:00.0: setting latency timer to 64
[ 13.969857] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 13.969940] sky2 0000:04:00.0: irq 56 for MSI/MSI-X
[ 13.970105] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
[ 13.971966] md3:
[ 14.033237] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 14.033240] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [mem 0x00000400-0x0000040f 64bit pref window disabled]
[ 14.033242] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.042770] unknown partition table
[ 14.253773] Linux agpgart interface v0.103
[ 14.281843] [drm] Initialized drm 1.1.0 20060810
[ 14.426843] [drm] radeon defaulting to kernel modesetting.
[ 14.426845] [drm] radeon kernel modesetting enabled.
[ 14.426879] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 14.426883] radeon 0000:03:00.0: setting latency timer to 64
[ 14.427650] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[ 14.427804] [drm] register mmio base: 0xFBAC0000
[ 14.427805] [drm] register mmio size: 131072
[ 14.427869] ATOM BIOS: JUNIPER
[ 14.427878] [drm] Clocks initialized !
[ 14.427879] [drm] 1 Power State(s)
[ 14.427880] [drm] State 0 Default (default)
[ 14.427881] [drm] 16 PCIE Lanes
[ 14.427882] [drm] 1 Clock Mode(s)
[ 14.427883] [drm] 0 engine/memory: 850000/1200000
[ 14.427888] [drm] radeon: power management initialized
[ 14.427893] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 14.427895] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 14.427905] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 14.427906] [drm] Detected VRAM RAM=256M, BAR=256M
[ 14.427907] [drm] RAM width 128bits DDR
[ 14.427932] [TTM] Zone kernel: Available graphics memory: 6151604 kiB.
[ 14.427933] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 14.427940] [drm] radeon: 256M of VRAM memory ready
[ 14.427941] [drm] radeon: 512M of GTT memory ready.
[ 14.429285] [drm] Radeon Display Connectors
[ 14.429286] [drm] Connector 0:
[ 14.429288] [drm] DisplayPort
[ 14.429289] [drm] HPD4
[ 14.429291] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 14.429293] [drm] Encoders:
[ 14.429294] [drm] DFP1: INTERNAL_UNIPHY2
[ 14.429296] [drm] Connector 1:
[ 14.429297] [drm] HDMI-A
[ 14.429298] [drm] HPD5
[ 14.429300] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 14.429301] [drm] Encoders:
[ 14.429303] [drm] DFP2: INTERNAL_UNIPHY2
[ 14.429304] [drm] Connector 2:
[ 14.429305] [drm] DVI-I
[ 14.429307] [drm] HPD1
[ 14.429309] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 14.429310] [drm] Encoders:
[ 14.429312] [drm] DFP3: INTERNAL_UNIPHY1
[ 14.429313] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 14.429315] [drm] Connector 3:
[ 14.429316] [drm] DVI-I
[ 14.429317] [drm] HPD6
[ 14.429319] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 14.429321] [drm] Encoders:
[ 14.429322] [drm] DFP4: INTERNAL_UNIPHY
[ 14.429324] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 14.478732] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.478774] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 14.478795] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.805032] [drm] fb mappable at 0xD0040000
[ 14.805033] [drm] vram apper at 0xD0000000
[ 14.805034] [drm] size 8294400
[ 14.805035] [drm] fb depth is 24
[ 14.805036] [drm] pitch is 7680
[ 14.829458] Console: switching to colour frame buffer device 240x67
[ 14.833424] fb0: radeondrmfb frame buffer device
[ 14.833425] registered panic notifier
[ 14.833428] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
[ 14.882132] hda_codec: AD1989B: BIOS auto-probing.
[ 14.884404] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 14.884443] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
[ 14.884460] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 15.314746] EXT3-fs (md5): using internal journal
[ 15.629535] md: md11 stopped.
[ 15.671637] md: bind<sde1>
[ 15.671820] md: bind<sdd1>
[ 15.672297] raid0: looking at sdd1
[ 15.672299] raid0: comparing sdd1(104871936)
[ 15.672300] with sdd1(104871936)
[ 15.672301] raid0: END
[ 15.672301] raid0: ==> UNIQUE
[ 15.672302] raid0: 1 zones
[ 15.672303] raid0: looking at sde1
[ 15.672304] raid0: comparing sde1(104871936)
[ 15.672305] with sdd1(104871936)
[ 15.672306] raid0: EQUAL
[ 15.672307] raid0: FINAL 1 zones
[ 15.672308] raid0: done.
[ 15.672309] raid0 : md_size is 209743872 sectors.
[ 15.672310] ******* md11 configuration *********
[ 15.672311] zone0=[sdd1/sde1/]
[ 15.672313] zone offset=0kb device offset=0kb size=104871936kb
[ 15.672314] **********************************
[ 15.672315]
[ 15.672318] md11: detected capacity change from 0 to 107388862464
[ 15.672777] md11: unknown partition table
[ 15.683619] md: md6 stopped.
[ 15.685524] md: bind<sdb6>
[ 15.687223] md: bind<sdc6>
[ 15.687386] md: bind<sda6>
[ 15.687918] raid1: raid set md6 active with 3 out of 3 mirrors
[ 15.687931] md6: detected capacity change from 0 to 253354939392
[ 15.688416] md6: unknown partition table
[ 16.134404] kjournald starting. Commit interval 5 seconds
[ 16.134412] EXT3-fs (md11): warning: maximal mount count reached, running e2fsck is recommended
[ 16.134666] EXT3-fs (md11): using internal journal
[ 16.134671] EXT3-fs (md11): mounted filesystem with writeback data mode
[ 16.171735] kjournald starting. Commit interval 5 seconds
[ 16.171739] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 16.191898] EXT3-fs (md6): using internal journal
[ 16.191903] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 16.251083] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 16.259361] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 16.260639] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 21.955469] sky2 0000:06:00.0: eth0: enabling interface
[ 23.767400] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 28.239123] NET: Registered protocol family 10
[ 30.573416] /dev/vmmon[4186]: Module vmmon: registered with major=10 minor=165
[ 30.573424] /dev/vmmon[4186]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 30.573430] /dev/vmmon[4186]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 30.573431] /dev/vmmon[4186]: Module vmmon: initialized
[ 30.666068] /dev/vmci[4205]: VMCI: Driver initialized.
[ 30.666083] /dev/vmci[4205]: Module vmci: registered with major=10 minor=59
[ 30.666084] /dev/vmci[4205]: Module vmci: initialized
[ 30.930673] /dev/vmnet: open called by PID 4287 (vmnet-bridge)
[ 30.930678] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 30.930698] /dev/vmnet: port on hub 0 successfully opened
[ 30.930707] bridge-eth0: up
[ 30.930710] bridge-eth0: attached
[ 32.137058] /dev/vmnet: open called by PID 4294 (vmnet-dhcpd)
[ 32.137063] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 32.137081] /dev/vmnet: port on hub 1 successfully opened
[ 32.203787] /dev/vmnet: open called by PID 4296 (vmnet-netifup)
[ 32.203797] /dev/vmnet: port on hub 1 successfully opened
[ 32.250937] /dev/vmnet: open called by PID 4299 (vmnet-dhcpd)
[ 32.250942] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 32.250961] /dev/vmnet: port on hub 8 successfully opened
[ 32.355712] /dev/vmnet: open called by PID 4303 (vmnet-natd)
[ 32.355718] /dev/vmnet: port on hub 8 successfully opened
[ 32.369300] /dev/vmnet: open called by PID 4304 (vmnet-netifup)
[ 32.369305] /dev/vmnet: port on hub 8 successfully opened
[ 38.215685] eth0: no IPv6 routers present
[ 42.346530] vmnet1: no IPv6 routers present
[ 43.158538] vmnet8: no IPv6 routers present
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 16:06 ` Mark Knecht
2010-07-03 16:13 ` Tejun Heo
@ 2010-07-03 18:56 ` Stan Hoeppner
2010-07-03 19:21 ` Mark Knecht
1 sibling, 1 reply; 55+ messages in thread
From: Stan Hoeppner @ 2010-07-03 18:56 UTC (permalink / raw)
To: Mark Knecht; +Cc: Tejun Heo, Linux Kernel List, linux-ide
Mark Knecht put forth on 7/3/2010 11:06 AM:
>>> I have a newish machine - maybe 3 months old - which unreliably
>>> finds its disk drives at each boot. Probably 40% of the time booting 1
>>> or more drives will be missing.
Please provide the make/model of the PC. If it's whitebox or DIY please
provide make/model of PSU, mobo and CPU. How many USB peripherals are powered
by the PC? Are you powering a water cooling loop pump from the PC's power
supply? Is this PC in a temperature controlled environment (A/C)?
--
Stan
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 18:56 ` Stan Hoeppner
@ 2010-07-03 19:21 ` Mark Knecht
2010-07-03 19:42 ` Stan Hoeppner
0 siblings, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-03 19:21 UTC (permalink / raw)
To: Stan Hoeppner; +Cc: Tejun Heo, Linux Kernel List, linux-ide
On Sat, Jul 3, 2010 at 11:56 AM, Stan Hoeppner <stan@hardwarefreak.com> wrote:
> Mark Knecht put forth on 7/3/2010 11:06 AM:
>
>>>> I have a newish machine - maybe 3 months old - which unreliably
>>>> finds its disk drives at each boot. Probably 40% of the time booting 1
>>>> or more drives will be missing.
>
> Please provide the make/model of the PC. If it's whitebox or DIY please
> provide make/model of PSU, mobo and CPU. How many USB peripherals are powered
> by the PC? Are you powering a water cooling loop pump from the PC's power
> supply? Is this PC in a temperature controlled environment (A/C)?
>
> --
> Stan
>
Build it myself.
Asus Rampage II Extreme motherboard
12GB Crucial DRAM currently installed (Holds 24GB)
Intel Core i7-980X CPU @ 3.33Ghz
Palit nVidia 9500GT-based graphics card
Sony Nec Optiarc AD-7241S-0B 24X Dual Layer DVD+/-RW SATA Drive
(5x) WD5002ABYS RE3 Enterprise Class 500GB hard drives
No external devices other than monitor, mouse, keyboard and the USB
interface to the UPS are attached. No USB, 1394 or eSATA are attached
at this time.
It's all powered by:
Corsair CMPSU-750TX 750-Watt TX Series 80 Plus Certified Power Supply
Air cooled using the stock Intel fan that came with the processor and
sitting in a home office environment.
The machine draws (steady state) about 250-275W according to both the
UPS it's hooked to as well as my trusty Kill-a-Watt. What it might
draw transient at power on while drives are spinning up I wouldn't
hazard a guess but it does seem to be well below the rating of the
supply. The PSU actually has something like 8 or 10 SATA power
connections, not that that means anything. I'm using 6. (1 CDRW, 5
drives)
Note two things:
1) All the drives are always reported by BIOS at boot time. Now, that
doesn't guarantee that the drives spin up. It may only mean they can
be read by BIOS, but they are there as far as I can tell. They show up
in the boot screens and in BIOS itself if I drop in to play with
settings.
2) Whatever state the machine comes up in - drives recognized or not -
it will run forever in that state under some pretty heavy loads so it
isn't like the PSU can't completely do the job. It could possibly be
marginal though.
QUESTION: There are some settings in BIOS for delaying the drive. (Or
something. I'm using the machine and not in BIOS) There were settings
from 0 to 35 seconds if I remember correctly. Possibly I should try
setting each drive to a different value to different value to stagger
power up?
If you need more info or have other ideas please let me know.
Thanks,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 19:21 ` Mark Knecht
@ 2010-07-03 19:42 ` Stan Hoeppner
2010-07-03 19:57 ` Mark Knecht
2010-07-03 20:15 ` Gene Heskett
0 siblings, 2 replies; 55+ messages in thread
From: Stan Hoeppner @ 2010-07-03 19:42 UTC (permalink / raw)
To: Mark Knecht; +Cc: Tejun Heo, Linux Kernel List, linux-ide
Mark Knecht put forth on 7/3/2010 2:21 PM:
> Note two things:
>
> 1) All the drives are always reported by BIOS at boot time. Now, that
> doesn't guarantee that the drives spin up. It may only mean they can
> be read by BIOS, but they are there as far as I can tell. They show up
> in the boot screens and in BIOS itself if I drop in to play with
> settings.
I missed that. I thought I read it was both. My bad.
> QUESTION: There are some settings in BIOS for delaying the drive. (Or
> something. I'm using the machine and not in BIOS) There were settings
> from 0 to 35 seconds if I remember correctly. Possibly I should try
> setting each drive to a different value to different value to stagger
> power up?
If that PSU meets published specs you shouldn't need delayed spin up with
those 5 drives.
> If you need more info or have other ideas please let me know.
Your answers here should have pretty much eliminated hardware issues as the
cause, unless that particular mobo has BIOS or other issues I'm unaware of.
I've found it's always best to ask about hardware with this kind of report
just to eliminate possibilities. All that gear is good quality stuff. If the
problem is due to hardware, it's because one of your components is defective,
but we don't see evidence of that at this point.
Also, TTBOMK, if a SATA drive motor doesn't spin up, the drive firmware won't
report the drive as ready upstream, thus the BIOS won't list the drive.
--
Stan
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 19:42 ` Stan Hoeppner
@ 2010-07-03 19:57 ` Mark Knecht
2010-07-03 22:31 ` Mark Knecht
2010-07-03 20:15 ` Gene Heskett
1 sibling, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-03 19:57 UTC (permalink / raw)
To: Stan Hoeppner; +Cc: Tejun Heo, Linux Kernel List, linux-ide
On Sat, Jul 3, 2010 at 12:42 PM, Stan Hoeppner <stan@hardwarefreak.com> wrote:
> Mark Knecht put forth on 7/3/2010 2:21 PM:
>
>> Note two things:
>>
>> 1) All the drives are always reported by BIOS at boot time. Now, that
>> doesn't guarantee that the drives spin up. It may only mean they can
>> be read by BIOS, but they are there as far as I can tell. They show up
>> in the boot screens and in BIOS itself if I drop in to play with
>> settings.
>
> I missed that. I thought I read it was both. My bad.
>
Not a problem. It's good to be as clear as possible for all involved.
>> QUESTION: There are some settings in BIOS for delaying the drive. (Or
>> something. I'm using the machine and not in BIOS) There were settings
>> from 0 to 35 seconds if I remember correctly. Possibly I should try
>> setting each drive to a different value to different value to stagger
>> power up?
>
> If that PSU meets published specs you shouldn't need delayed spin up with
> those 5 drives.
>
I've not dropped into BIOS yet as the machine is in use but from the
Asus manual it appears the delay is not on a drive by drive basis so I
don't think I can do much there.
>> If you need more info or have other ideas please let me know.
>
> Your answers here should have pretty much eliminated hardware issues as the
> cause, unless that particular mobo has BIOS or other issues I'm unaware of.
>
> I've found it's always best to ask about hardware with this kind of report
> just to eliminate possibilities. All that gear is good quality stuff. If the
> problem is due to hardware, it's because one of your components is defective,
> but we don't see evidence of that at this point.
>
> Also, TTBOMK, if a SATA drive motor doesn't spin up, the drive firmware won't
> report the drive as ready upstream, thus the BIOS won't list the drive.
An off-list response suggested possibly setting some drive jumpers on
non-boot drives to power up in standby. Apparently the kernel will
then spin up those drives later? If I cannot stagger the drives in
BIOS then I will likely try that. Technically I guess I only need
/boot on sda to get the kernel booted. The mdadm RAID1 on sda/sdb/sdc
could start slightly later, and technically the RAID0 on sdd/sde could
start very late as there are only VMWare images on that drive.
Cheers,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 19:42 ` Stan Hoeppner
2010-07-03 19:57 ` Mark Knecht
@ 2010-07-03 20:15 ` Gene Heskett
1 sibling, 0 replies; 55+ messages in thread
From: Gene Heskett @ 2010-07-03 20:15 UTC (permalink / raw)
To: linux-ide
On Saturday 03 July 2010, Stan Hoeppner wrote:
>Mark Knecht put forth on 7/3/2010 2:21 PM:
>> Note two things:
>>
>> 1) All the drives are always reported by BIOS at boot time. Now, that
>> doesn't guarantee that the drives spin up. It may only mean they can
>> be read by BIOS, but they are there as far as I can tell. They show up
>> in the boot screens and in BIOS itself if I drop in to play with
>> settings.
>
>I missed that. I thought I read it was both. My bad.
>
>> QUESTION: There are some settings in BIOS for delaying the drive. (Or
>> something. I'm using the machine and not in BIOS) There were settings
>> from 0 to 35 seconds if I remember correctly. Possibly I should try
>> setting each drive to a different value to different value to stagger
>> power up?
>
>If that PSU meets published specs you shouldn't need delayed spin up with
>those 5 drives.
>
>> If you need more info or have other ideas please let me know.
>
>Your answers here should have pretty much eliminated hardware issues as
> the cause, unless that particular mobo has BIOS or other issues I'm
> unaware of.
>
I would not trust the PSU just because it has a 'name' brand on it. One of
them in particular, and a popular one too, seems designed to work for not
more than 20 minutes more than the warranty period, and in 2 instances here
at the old farts home, has sagged to less than 4.8 volts on the 5 volt line
well short of the usually 1 year warranty. I have a no-name el cheapo psu
here, 350 watt rated, with a 90 day warranty, that has been reliably
starting 4 HD's in this box for almost 3 years now. Put a digital meter on
both the 12 volt and 5 volt lines, and verify that the first reading you get
from turning it on is at least 11.75 volts for the 12 volt line, and not
less than 4.95 volts on the 5 volt line, as measured at the 4 pin drive
power connector. Anything less is grounds to at least try a fresher supply.
>I've found it's always best to ask about hardware with this kind of report
>just to eliminate possibilities. All that gear is good quality stuff. If
> the problem is due to hardware, it's because one of your components is
> defective, but we don't see evidence of that at this point.
>
>Also, TTBOMK, if a SATA drive motor doesn't spin up, the drive firmware
> won't report the drive as ready upstream, thus the BIOS won't list the
> drive.
And quite likely that any spinup delays are probably not considered by the
bios anyway.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Yes, it is written. Good shall always destroy evil.
-- Sirah the Yang, "The Omega Glory", stardate unknown
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 19:57 ` Mark Knecht
@ 2010-07-03 22:31 ` Mark Knecht
2010-07-04 1:25 ` Thomas Fjellstrom
2010-07-05 6:19 ` Tejun Heo
0 siblings, 2 replies; 55+ messages in thread
From: Mark Knecht @ 2010-07-03 22:31 UTC (permalink / raw)
To: Stan Hoeppner; +Cc: Tejun Heo, Linux Kernel List, linux-ide
On Sat, Jul 3, 2010 at 12:57 PM, Mark Knecht <markknecht@gmail.com> wrote:
> On Sat, Jul 3, 2010 at 12:42 PM, Stan Hoeppner <stan@hardwarefreak.com> wrote:
>> Mark Knecht put forth on 7/3/2010 2:21 PM:
>>
>>> Note two things:
>>>
>>> 1) All the drives are always reported by BIOS at boot time. Now, that
>>> doesn't guarantee that the drives spin up. It may only mean they can
>>> be read by BIOS, but they are there as far as I can tell. They show up
>>> in the boot screens and in BIOS itself if I drop in to play with
>>> settings.
>>
>> I missed that. I thought I read it was both. My bad.
>>
>
> Not a problem. It's good to be as clear as possible for all involved.
>
>>> QUESTION: There are some settings in BIOS for delaying the drive. (Or
>>> something. I'm using the machine and not in BIOS) There were settings
>>> from 0 to 35 seconds if I remember correctly. Possibly I should try
>>> setting each drive to a different value to different value to stagger
>>> power up?
>>
>> If that PSU meets published specs you shouldn't need delayed spin up with
>> those 5 drives.
>>
>
> I've not dropped into BIOS yet as the machine is in use but from the
> Asus manual it appears the delay is not on a drive by drive basis so I
> don't think I can do much there.
>
>>> If you need more info or have other ideas please let me know.
>>
>> Your answers here should have pretty much eliminated hardware issues as the
>> cause, unless that particular mobo has BIOS or other issues I'm unaware of.
>>
>> I've found it's always best to ask about hardware with this kind of report
>> just to eliminate possibilities. All that gear is good quality stuff. If the
>> problem is due to hardware, it's because one of your components is defective,
>> but we don't see evidence of that at this point.
>>
>> Also, TTBOMK, if a SATA drive motor doesn't spin up, the drive firmware won't
>> report the drive as ready upstream, thus the BIOS won't list the drive.
>
> An off-list response suggested possibly setting some drive jumpers on
> non-boot drives to power up in standby. Apparently the kernel will
> then spin up those drives later? If I cannot stagger the drives in
> BIOS then I will likely try that. Technically I guess I only need
> /boot on sda to get the kernel booted. The mdadm RAID1 on sda/sdb/sdc
> could start slightly later, and technically the RAID0 on sdd/sde could
> start very late as there are only VMWare images on that drive.
>
> Cheers,
> Mark
>
OK, I don't know if this is related but so far I cannot get the
machine to boot if I set BIOS SATA configuration to AHCI. I believe
that I have AHCI support as well as SATA support built into the kernel
but when I set the BIOS to AHCI the machine just hangs saying it finds
no medium. I assume that means no hard drive. I have to set SATA
support to enhanced and then IDE to get the machine to boot at all.
I did notice that my earlier kernel had the depreciated ATA/ATAPI
support selected so I removed that from the kernel but it didn't
change the results.
The lshw listings below show the DATA controllers. The 20360/363 is
(apparently) the eSATA controller going to the front panel. Nothing is
attached there. The chipset supposedly handles 6 SATA ports - they
seem to be arranged x4 & x2. TTBOMK I have the CDROM and the 3-drive
RAID1 on the 4 port controller and the RAID0, which fails to be
recognized more often - on the 2 port controller. I don't know how to
prove that though.
I'm unclear how mature the SATA support is for this chipset. Is there
a chance that this is some bit that's not being sey reliably?
Also, I misspoke earlier about the graphics adapter. It's actually an
ATI Radeon 5770 in this machine. The 9500GT is in another machine.
Thanks,
Mark
c2stable ~ # lshw -short -class storage
H/W path Device Class Description
=========================================================
/0/100/1c.4/0 storage 20360/20363 Serial ATA Controller
/0/100/1c.4/0.1 storage 20360/20363 Serial ATA Controller
/0/100/1f.2 scsi2 storage 82801JI (ICH10 Family) 4
port SATA IDE Controller
/0/100/1f.5 scsi5 storage 82801JI (ICH10 Family) 2
port SATA IDE Controller
c2stable ~ # lshw -short | grep SATA
/0/100/1f.2 scsi2 storage 82801JI (ICH10 Family) 4
port SATA IDE Controller
/0/100/1f.5 scsi5 storage 82801JI (ICH10 Family) 2
port SATA IDE Controller
c2stable ~ # lshw -short | grep disk
/0/100/1f.2/0 /dev/sda disk 500GB WDC WD5002ABYS-0
/0/100/1f.2/0.0.0 /dev/sdb disk 500GB WDC WD5002ABYS-0
/0/100/1f.2/1 /dev/sdc disk 500GB WDC WD5002ABYS-0
/0/100/1f.5/0.0.0 /dev/sdd disk 500GB WDC WD5002ABYS-0
c2stable ~ #
NOTE ABOVE: /dev/sde not recognized on this boot.
c2stable linux # lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 1 (rev 13)
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 3 (rev 13)
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 7 (rev 13)
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management
Registers (rev 13)
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch
Pad Registers (rev 13)
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status
and RAS Registers (rev 13)
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 3
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller
03:00.0 VGA compatible controller: ATI Technologies Inc Device 68b8
03:00.1 Audio device: ATI Technologies Inc Device aa58
04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
PCI-E Gigabit Ethernet Controller (rev 12)
05:00.0 SATA controller: JMicron Technology Corp. 20360/20363 Serial
ATA Controller (rev 03)
05:00.1 IDE interface: JMicron Technology Corp. 20360/20363 Serial ATA
Controller (rev 03)
06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
PCI-E Gigabit Ethernet Controller (rev 12)
08:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II
IEEE 1394 OHCI Link Layer Controller (rev c0)
c2stable linux #
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 22:31 ` Mark Knecht
@ 2010-07-04 1:25 ` Thomas Fjellstrom
2010-07-05 6:19 ` Tejun Heo
1 sibling, 0 replies; 55+ messages in thread
From: Thomas Fjellstrom @ 2010-07-04 1:25 UTC (permalink / raw)
To: linux-kernel
On July 3, 2010, Mark Knecht wrote:
> On Sat, Jul 3, 2010 at 12:57 PM, Mark Knecht <markknecht@gmail.com> wrote:
> > On Sat, Jul 3, 2010 at 12:42 PM, Stan Hoeppner <stan@hardwarefreak.com>
wrote:
> >> Mark Knecht put forth on 7/3/2010 2:21 PM:
> >>> Note two things:
> >>>
> >>> 1) All the drives are always reported by BIOS at boot time. Now, that
> >>> doesn't guarantee that the drives spin up. It may only mean they can
> >>> be read by BIOS, but they are there as far as I can tell. They show
> >>> up in the boot screens and in BIOS itself if I drop in to play with
> >>> settings.
> >>
> >> I missed that. I thought I read it was both. My bad.
> >
> > Not a problem. It's good to be as clear as possible for all involved.
> >
> >>> QUESTION: There are some settings in BIOS for delaying the drive. (Or
> >>> something. I'm using the machine and not in BIOS) There were settings
> >>> from 0 to 35 seconds if I remember correctly. Possibly I should try
> >>> setting each drive to a different value to different value to stagger
> >>> power up?
> >>
> >> If that PSU meets published specs you shouldn't need delayed spin up
> >> with those 5 drives.
> >
> > I've not dropped into BIOS yet as the machine is in use but from the
> > Asus manual it appears the delay is not on a drive by drive basis so I
> > don't think I can do much there.
> >
> >>> If you need more info or have other ideas please let me know.
> >>
> >> Your answers here should have pretty much eliminated hardware issues
> >> as the cause, unless that particular mobo has BIOS or other issues
> >> I'm unaware of.
> >>
> >> I've found it's always best to ask about hardware with this kind of
> >> report just to eliminate possibilities. All that gear is good
> >> quality stuff. If the problem is due to hardware, it's because one
> >> of your components is defective, but we don't see evidence of that at
> >> this point.
> >>
> >> Also, TTBOMK, if a SATA drive motor doesn't spin up, the drive
> >> firmware won't report the drive as ready upstream, thus the BIOS
> >> won't list the drive.
> >
> > An off-list response suggested possibly setting some drive jumpers on
> > non-boot drives to power up in standby. Apparently the kernel will
> > then spin up those drives later? If I cannot stagger the drives in
> > BIOS then I will likely try that. Technically I guess I only need
> > /boot on sda to get the kernel booted. The mdadm RAID1 on sda/sdb/sdc
> > could start slightly later, and technically the RAID0 on sdd/sde could
> > start very late as there are only VMWare images on that drive.
> >
> > Cheers,
> > Mark
>
> OK, I don't know if this is related but so far I cannot get the
> machine to boot if I set BIOS SATA configuration to AHCI. I believe
> that I have AHCI support as well as SATA support built into the kernel
> but when I set the BIOS to AHCI the machine just hangs saying it finds
> no medium. I assume that means no hard drive. I have to set SATA
> support to enhanced and then IDE to get the machine to boot at all.
>
> I did notice that my earlier kernel had the depreciated ATA/ATAPI
> support selected so I removed that from the kernel but it didn't
> change the results.
>
> The lshw listings below show the DATA controllers. The 20360/363 is
> (apparently) the eSATA controller going to the front panel. Nothing is
> attached there. The chipset supposedly handles 6 SATA ports - they
> seem to be arranged x4 & x2. TTBOMK I have the CDROM and the 3-drive
> RAID1 on the 4 port controller and the RAID0, which fails to be
> recognized more often - on the 2 port controller. I don't know how to
> prove that though.
>
> I'm unclear how mature the SATA support is for this chipset. Is there
> a chance that this is some bit that's not being sey reliably?
>
> Also, I misspoke earlier about the graphics adapter. It's actually an
> ATI Radeon 5770 in this machine. The 9500GT is in another machine.
>
> Thanks,
> Mark
>
> c2stable ~ # lshw -short -class storage
> H/W path Device Class Description
> =========================================================
> /0/100/1c.4/0 storage 20360/20363 Serial ATA
> Controller /0/100/1c.4/0.1 storage 20360/20363
> Serial ATA Controller /0/100/1f.2 scsi2 storage
> 82801JI (ICH10 Family) 4 port SATA IDE Controller
> /0/100/1f.5 scsi5 storage 82801JI (ICH10 Family) 2
> port SATA IDE Controller
> c2stable ~ # lshw -short | grep SATA
> /0/100/1f.2 scsi2 storage 82801JI (ICH10 Family) 4
> port SATA IDE Controller
> /0/100/1f.5 scsi5 storage 82801JI (ICH10 Family) 2
> port SATA IDE Controller
> c2stable ~ # lshw -short | grep disk
> /0/100/1f.2/0 /dev/sda disk 500GB WDC WD5002ABYS-0
> /0/100/1f.2/0.0.0 /dev/sdb disk 500GB WDC WD5002ABYS-0
> /0/100/1f.2/1 /dev/sdc disk 500GB WDC WD5002ABYS-0
> /0/100/1f.5/0.0.0 /dev/sdd disk 500GB WDC WD5002ABYS-0
> c2stable ~ #
>
> NOTE ABOVE: /dev/sde not recognized on this boot.
>
>
> c2stable linux # lspci
> 00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
> 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
> Express Root Port 1 (rev 13)
> 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
> Express Root Port 3 (rev 13)
> 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI
> Express Root Port 7 (rev 13)
> 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management
> Registers (rev 13)
> 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch
> Pad Registers (rev 13)
> 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status
> and RAS Registers (rev 13)
> 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers
> (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10
> Family) USB UHCI Controller #4
> 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
> UHCI Controller #5
> 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
> UHCI Controller #6
> 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
> EHCI Controller #2
> 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD
> Audio Controller
> 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
> Port 1 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI
> Express Port 3 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10
> Family) PCI Express Port 5 00:1c.5 PCI bridge: Intel Corporation 82801JI
> (ICH10 Family) PCI Express Port 6 00:1d.0 USB Controller: Intel
> Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
> 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
> UHCI Controller #2
> 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
> UHCI Controller #3
> 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
> EHCI Controller #1
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
> 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
> Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10
> Family) 4 port SATA IDE Controller
> 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
> 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
> SATA IDE Controller
> 03:00.0 VGA compatible controller: ATI Technologies Inc Device 68b8
> 03:00.1 Audio device: ATI Technologies Inc Device aa58
> 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
> PCI-E Gigabit Ethernet Controller (rev 12)
> 05:00.0 SATA controller: JMicron Technology Corp. 20360/20363 Serial
> ATA Controller (rev 03)
> 05:00.1 IDE interface: JMicron Technology Corp. 20360/20363 Serial ATA
> Controller (rev 03)
> 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056
> PCI-E Gigabit Ethernet Controller (rev 12)
> 08:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306 Fire II
> IEEE 1394 OHCI Link Layer Controller (rev c0)
> c2stable linux #
If it wasn't for all that, I'd have suspected a small power issue.
I recently ran into an odd problem of how my PSU has its rails split up
between different cables. If I had all the hardware in the box hooked up
with the normal "black" cables from my PSU I'd get errors from one of my 2TB
WD Green's. But if I moved the drives, or the GPU to the "red" plug (modular
psu), everything worked. I assume the rails on my psu were split up
absolutely retardedly, causing the main 12v rail to be shared between the
cpu, all add-on devices, AND the non-modular PCI-E cable for the GPU
(8800GTS), causing that rail's voltage to drop below spec.
But it sounds like maybe your SATA chipset might not be supported in AHCI
mode (which you really want), and might have issues in IDE mode. But given
that its an intel chipset you'd think it'd have perfect support :o So I
don't know.
--
Thomas Fjellstrom
tfjellstrom@strangesoft.net
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 22:31 ` Mark Knecht
2010-07-04 1:25 ` Thomas Fjellstrom
@ 2010-07-05 6:19 ` Tejun Heo
2010-07-05 16:48 ` Mark Knecht
1 sibling, 1 reply; 55+ messages in thread
From: Tejun Heo @ 2010-07-05 6:19 UTC (permalink / raw)
To: Mark Knecht; +Cc: Stan Hoeppner, Linux Kernel List, linux-ide
Hello,
On 07/04/2010 12:31 AM, Mark Knecht wrote:
> OK, I don't know if this is related but so far I cannot get the
> machine to boot if I set BIOS SATA configuration to AHCI. I believe
> that I have AHCI support as well as SATA support built into the kernel
> but when I set the BIOS to AHCI the machine just hangs saying it finds
> no medium. I assume that means no hard drive. I have to set SATA
> support to enhanced and then IDE to get the machine to boot at all.
That's odd. Can you please attach kernel boot log w/ ahci mode?
Booting a recent live CD and saving boot log from there should do the
trick.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-03 16:42 ` Mark Knecht
@ 2010-07-05 6:30 ` Tejun Heo
2010-07-05 16:56 ` Mark Knecht
0 siblings, 1 reply; 55+ messages in thread
From: Tejun Heo @ 2010-07-05 6:30 UTC (permalink / raw)
To: Mark Knecht; +Cc: Linux Kernel List, linux-ide
[-- Attachment #1: Type: text/plain, Size: 487 bytes --]
On 07/03/2010 06:42 PM, Mark Knecht wrote:
> On Sat, Jul 3, 2010 at 9:13 AM, Tejun Heo <tj@kernel.org> wrote:
>> Hello,
>>
>> On 07/03/2010 06:06 PM, Mark Knecht wrote:
>>>> Can you please *attach* full logs of a successful boot and several
>>>> failing boots?
>>>
>>> Certainly? Which logs? dmesg or something else?
>>
>> dmesg output preferably with printk timestamp enabled.
Can you please apply the attached patch, reproduce the problem and
post the kernel log?
Thanks.
--
tejun
[-- Attachment #2: resume-dbg.patch --]
[-- Type: text/x-patch, Size: 1054 bytes --]
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2984e45..987ca80 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3739,6 +3739,14 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
return rc;
} while ((scontrol & 0xf0f) != 0x300 && --tries);
+ /* check once more */
+ msleep(100);
+ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+ return rc;
+ ata_link_printk(link, KERN_ERR,
+ "XXX SControl after resume = %X, tries=%d\n",
+ scontrol, ATA_LINK_RESUME_TRIES - tries + 1);
+
if ((scontrol & 0xf0f) != 0x300) {
ata_link_printk(link, KERN_ERR,
"failed to resume link (SControl %X)\n",
@@ -6007,7 +6015,7 @@ static void async_port_probe(void *data, async_cookie_t cookie)
ehi->probe_mask |= ATA_ALL_DEVICES;
ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
- ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
+ ehi->flags |= ATA_EHI_NO_AUTOPSY/* | ATA_EHI_QUIET*/;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
ap->pflags |= ATA_PFLAG_LOADING;
^ permalink raw reply related [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-05 6:19 ` Tejun Heo
@ 2010-07-05 16:48 ` Mark Knecht
2010-07-05 23:59 ` Robert Hancock
2010-07-06 6:32 ` Tejun Heo
0 siblings, 2 replies; 55+ messages in thread
From: Mark Knecht @ 2010-07-05 16:48 UTC (permalink / raw)
To: Tejun Heo; +Cc: Stan Hoeppner, Linux Kernel List, linux-ide
[-- Attachment #1: Type: text/plain, Size: 1553 bytes --]
On Sun, Jul 4, 2010 at 11:19 PM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On 07/04/2010 12:31 AM, Mark Knecht wrote:
>> OK, I don't know if this is related but so far I cannot get the
>> machine to boot if I set BIOS SATA configuration to AHCI. I believe
>> that I have AHCI support as well as SATA support built into the kernel
>> but when I set the BIOS to AHCI the machine just hangs saying it finds
>> no medium. I assume that means no hard drive. I have to set SATA
>> support to enhanced and then IDE to get the machine to boot at all.
>
> That's odd. Can you please attach kernel boot log w/ ahci mode?
> Booting a recent live CD and saving boot log from there should do the
> trick.
>
> Thanks.
>
> --
> tejun
>
Hi Tehun,
Thanks for the help.
I tried a Gentoo install CD from last march. It's a 2.6.31 type
kernel. Problem is the buffer depths are not big enough to capture the
complete dmesg contents and I don't know a command line option to make
it larger on the fly. If you know of one that's got a larger buffer -
or a command to increase it at boot time - then let me know and I'll
try again.
I'm attaching what I was able to catch for both AHCI and IDE
settings in BIOS for the storage configuration option.
It seems to me that even in AHCI mode the machine does see all the
hard drives. Maybe there's something about my boot partition that's
having problems in AHCI mode only? If it sees /dev/sda then why
wouldn't it find grub and at least show a grub menu?
Thanks,
Mark
[-- Attachment #2: GentooBoot_IDE --]
[-- Type: application/octet-stream, Size: 30899 bytes --]
5,11 0,6 1,7 2,8 3,9 4,10
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.8
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - F6, should be EE 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x9800-0x981f]
pci 0000:00:1a.1: reg 20 io port: [0x9880-0x989f]
pci 0000:00:1a.2: reg 20 io port: [0x9c00-0x9c1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfb9ff000-0xfb9ff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfb9f8000-0xfb9fbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x9080-0x909f]
pci 0000:00:1d.1: reg 20 io port: [0x9400-0x941f]
pci 0000:00:1d.2: reg 20 io port: [0x9480-0x949f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfb9fe000-0xfb9fe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10 io port: [0x8000-0x8007]
pci 0000:00:1f.2: reg 14 io port: [0x7c00-0x7c03]
pci 0000:00:1f.2: reg 18 io port: [0x7880-0x7887]
pci 0000:00:1f.2: reg 1c io port: [0x7800-0x7803]
pci 0000:00:1f.2: reg 20 io port: [0x7480-0x748f]
pci 0000:00:1f.2: reg 24 io port: [0x7400-0x740f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb9fd000-0xfb9fd0ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0x9000-0x9007]
pci 0000:00:1f.5: reg 14 io port: [0x8c00-0x8c03]
pci 0000:00:1f.5: reg 18 io port: [0x8880-0x8887]
pci 0000:00:1f.5: reg 1c io port: [0x8800-0x8803]
pci 0000:00:1f.5: reg 20 io port: [0x8480-0x848f]
pci 0000:00:1f.5: reg 24 io port: [0x8400-0x840f]
pci 0000:03:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:03:00.0: reg 18 64bit mmio: [0xfbac0000-0xfbadffff]
pci 0000:03:00.0: reg 20 io port: [0xa000-0xa0ff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xfbaa0000-0xfbabffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: reg 10 64bit mmio: [0xfbafc000-0xfbafffff]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:07.0: bridge io port: [0xa000-0xafff]
pci 0000:00:07.0: bridge 32bit mmio: [0xfba00000-0xfbafffff]
pci 0000:00:07.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff]
pci 0000:06:00.0: reg 10 64bit mmio: [0xfbdfc000-0xfbdfffff]
pci 0000:06:00.0: reg 18 io port: [0xd800-0xd8ff]
pci 0000:06:00.0: reg 30 32bit mmio: [0xfbdc0000-0xfbddffff]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
pci 0000:05:00.0: reg 24 32bit mmio: [0xfbcfe000-0xfbcfffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: reg 10 io port: [0xcc00-0xcc07]
pci 0000:05:00.1: reg 14 io port: [0xc880-0xc883]
pci 0000:05:00.1: reg 18 io port: [0xc800-0xc807]
pci 0000:05:00.1: reg 1c io port: [0xc480-0xc483]
pci 0000:05:00.1: reg 20 io port: [0xc400-0xc40f]
pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xfbbfc000-0xfbbfffff]
pci 0000:04:00.0: reg 18 io port: [0xb800-0xb8ff]
pci 0000:04:00.0: reg 30 32bit mmio: [0xfbbc0000-0xfbbdffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfbb00000-0xfbbfffff]
pci 0000:08:02.0: reg 10 32bit mmio: [0xfbeff000-0xfbeff7ff]
pci 0000:08:02.0: reg 14 io port: [0xec00-0xec7f]
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved
system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
system 00:07: ioport range 0x290-0x29f has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x500-0x57f could not be reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
system 00:10: iomem range 0x0-0x9ffff could not be reserved
system 00:10: iomem range 0xc0000-0xcffff has been reserved
system 00:10: iomem range 0xe0000-0xfffff could not be reserved
system 00:10: iomem range 0x100000-0xbfffffff could not be reserved
system 00:10: iomem range 0xfed90000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: disabled
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: disabled
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0: IO window: 0xa000-0xafff
pci 0000:00:07.0: MEM window: 0xfba00000-0xfbafffff
pci 0000:00:07.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: 0x000000faf00000-0x000000faffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.2: IO window: 0xd000-0xdfff
pci 0000:00:1c.2: MEM window: 0xfbd00000-0xfbdfffff
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.4: IO window: 0xc000-0xcfff
pci 0000:00:1c.4: MEM window: 0xfbc00000-0xfbcfffff
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.5: IO window: 0xb000-0xbfff
pci 0000:00:1c.5: MEM window: 0xfbb00000-0xfbbfffff
pci 0000:00:1c.5: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0: IO window: 0xe000-0xefff
pci 0000:00:1e.0: MEM window: 0xfbe00000-0xfbefffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:03: resource 0 io: [0xa000-0xafff]
pci_bus 0000:03: resource 1 mem: [0xfba00000-0xfbafffff]
pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:07: resource 2 pref mem [0xfaf00000-0xfaffffff]
pci_bus 0000:06: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:06: resource 1 mem: [0xfbd00000-0xfbdfffff]
pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbcfffff]
pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:04: resource 1 mem: [0xfbb00000-0xfbbfffff]
pci_bus 0000:08: resource 0 io: [0xe000-0xefff]
pci_bus 0000:08: resource 1 mem: [0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 3 io: [0x00-0xffff]
pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5261k freed
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/O].
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 24028
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:03:00.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.5: setting latency timer to 64
Linux agpgart interface v0.103
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010100000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver
jmicron 0000:05:00.1: IDE controller (0x197b:0x2363 rev 0x03)
pci 0000:05:00.1: enabling device (0000 -> 0001)
pci 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
jmicron 0000:05:00.1: 100% native mode on irq 17
pci 0000:05:00.1: setting latency timer to 64
ide0: BM-DMA at 0xc400-0xc407
ide1: BM-DMA at 0xc408-0xc40f
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0xcc00-0xcc07,0xc882 on irq 17
ide1 at 0xc800-0xc807,0xc482 on irq 17
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide2...
ide2: no devices on the port
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide3...
ide3: no devices on the port
ide3 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
SCSI Media Changer driver v0.25
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.4
aoe: AoE v47 initialised.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Freeing unused kernel memory: 412k freed
Write protecting the kernel read-only data: 4796k
input: AT Translated Set 2 keyboard as /class/input/input1
libata version 3.00 loaded.
Error: Driver 'pata_platform' is already registered, aborting...
ahci 0000:05:00.0: version 3.0
ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:05:00.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
ata4.00: configured for UDMA/133
ata3.01: configured for UDMA/133
ata4.01: configured for UDMA/133
scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:1:0: [sda] Write Protect is off
sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sda:
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:
scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sdd] Write Protect is off
scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd:
sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sda1 sda2 sda3 sda4 < sde1
sd 5:0:0:0: [sde] Attached SCSI disk
sdb1 sdb2 sdb3 sdb4 <
sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sdd1
sd 4:0:0:0: [sdd] Attached SCSI disk
sda5 sdb5 sda6 >
sdb6
sd 3:0:1:0: [sdc] Write Protect is off
sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
>
sd 2:0:1:0: [sda] Attached SCSI disk
sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 3:0:1:0: [sdc] Attached SCSI disk
sr 2:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:1:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:1:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: Attached scsi generic sg5 type 0
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
Fusion MPT base driver 3.04.10
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.10
Fusion MPT FC Host driver 3.04.10
Fusion MPT SAS Host driver 3.04.10
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: PS/2 Generic Mouse as /class/input/input2
Adaptec aacraid driver 1.1-5[2461]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
QLogic Fibre Channel HBA Driver: 8.03.01-k4
Emulex LightPulse Fibre Channel SCSI driver 8.3.3
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-gentoo-r6 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-gentoo-r6 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
ohci1394 0000:08:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fbeff000-fbeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
md: raid0 personality registered for level 0
usb 3-2: new full speed USB device using uhci_hcd and address 2
md: raid1 personality registered for level 1
usb 3-2: New USB device found, idVendor=051d, idProduct=0002
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
usb 3-2: Manufacturer: American Power Conversion
usb 3-2: SerialNumber: 3B1007X44377
usb 3-2: configuration #1 chosen from 1 choice
raid6: int64x1 3360 MB/s
generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
raid6: int64x2 4275 MB/s
usb 8-2: new low speed USB device using uhci_hcd and address 2
raid6: int64x4 3031 MB/s
usb 8-2: New USB device found, idVendor=045e, idProduct=0039
usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
usb 8-2: Manufacturer: Microsoft
usb 8-2: configuration #1 chosen from 1 choice
raid6: int64x8 2841 MB/s
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input3
generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
raid6: sse2x1 8307 MB/s
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000f332f7]
raid6: sse2x2 9705 MB/s
raid6: sse2x4 10755 MB/s
raid6: using algorithm sse2x4 (10755 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 12672.800 MB/sec
xor: using function: generic_sse (12672.800 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
fuse init (API version 7.12)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
EXT4-fs (/dev/sr0): Update your userspace programs to mount using ext4
EXT4-fs (/dev/sr0): ext4dev backwards compatibility will go away by 2.6.31
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
udev: starting version 146
<3>udev: missing sysfs features; please update the kernel or disable the kernel's CONFIG_SYSFS_DEPRECATED option; udev may fail to work correctly
Real Time Clock Driver v1.12b
warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sky2 driver version 1.23
sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sky2 0000:06:00.0: setting latency timer to 64
sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
sky2 eth0: addr e0:cb:4e:97:7a:09
sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
sky2 eth1: addr e0:cb:4e:97:80:fd
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
HDA Intel 0000:03:00.1: setting latency timer to 64
ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
processor LNXCPU:08: registered as cooling_device8
processor LNXCPU:09: registered as cooling_device9
processor LNXCPU:0a: registered as cooling_device10
processor LNXCPU:0b: registered as cooling_device11
input: Power Button as /class/input/input4
ACPI: Power Button [PWRF]
input: Power Button as /class/input/input5
ACPI: Power Button [PWRB]
sky2 eth0: enabling interface
sky2 eth1: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[-- Attachment #3: GentooBoot_AHCI --]
[-- Type: application/octet-stream, Size: 30911 bytes --]
domain 0: span 5,11 level SIBLING
groups: 11 5
domain 1: span 0-11 level MC
groups: 5,11 0,6 1,7 2,8 3,9 4,10
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.8
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - F6, should be EE 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x9800-0x981f]
pci 0000:00:1a.1: reg 20 io port: [0x9880-0x989f]
pci 0000:00:1a.2: reg 20 io port: [0x9c00-0x9c1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfb9ff000-0xfb9ff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfb9f8000-0xfb9fbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x9080-0x909f]
pci 0000:00:1d.1: reg 20 io port: [0x9400-0x941f]
pci 0000:00:1d.2: reg 20 io port: [0x9480-0x949f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfb9fe000-0xfb9fe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10 io port: [0x8c00-0x8c07]
pci 0000:00:1f.2: reg 14 io port: [0x8880-0x8883]
pci 0000:00:1f.2: reg 18 io port: [0x8800-0x8807]
pci 0000:00:1f.2: reg 1c io port: [0x8480-0x8483]
pci 0000:00:1f.2: reg 20 io port: [0x8400-0x841f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb9fc000-0xfb9fc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb9fd000-0xfb9fd0ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:03:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:03:00.0: reg 18 64bit mmio: [0xfbac0000-0xfbadffff]
pci 0000:03:00.0: reg 20 io port: [0xa000-0xa0ff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xfbaa0000-0xfbabffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: reg 10 64bit mmio: [0xfbafc000-0xfbafffff]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:07.0: bridge io port: [0xa000-0xafff]
pci 0000:00:07.0: bridge 32bit mmio: [0xfba00000-0xfbafffff]
pci 0000:00:07.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff]
pci 0000:06:00.0: reg 10 64bit mmio: [0xfbdfc000-0xfbdfffff]
pci 0000:06:00.0: reg 18 io port: [0xd800-0xd8ff]
pci 0000:06:00.0: reg 30 32bit mmio: [0xfbdc0000-0xfbddffff]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
pci 0000:05:00.0: reg 24 32bit mmio: [0xfbcfe000-0xfbcfffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.1: reg 10 io port: [0xcc00-0xcc07]
pci 0000:05:00.1: reg 14 io port: [0xc880-0xc883]
pci 0000:05:00.1: reg 18 io port: [0xc800-0xc807]
pci 0000:05:00.1: reg 1c io port: [0xc480-0xc483]
pci 0000:05:00.1: reg 20 io port: [0xc400-0xc40f]
pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfbc00000-0xfbcfffff]
pci 0000:04:00.0: reg 10 64bit mmio: [0xfbbfc000-0xfbbfffff]
pci 0000:04:00.0: reg 18 io port: [0xb800-0xb8ff]
pci 0000:04:00.0: reg 30 32bit mmio: [0xfbbc0000-0xfbbdffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfbb00000-0xfbbfffff]
pci 0000:08:02.0: reg 10 32bit mmio: [0xfbeff000-0xfbeff7ff]
pci 0000:08:02.0: reg 14 io port: [0xec00-0xec7f]
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved
system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
system 00:07: ioport range 0x290-0x29f has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x500-0x57f could not be reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
system 00:10: iomem range 0x0-0x9ffff could not be reserved
system 00:10: iomem range 0xc0000-0xcffff has been reserved
system 00:10: iomem range 0xe0000-0xfffff could not be reserved
system 00:10: iomem range 0x100000-0xbfffffff could not be reserved
system 00:10: iomem range 0xfed90000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: disabled
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: disabled
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0: IO window: 0xa000-0xafff
pci 0000:00:07.0: MEM window: 0xfba00000-0xfbafffff
pci 0000:00:07.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: 0x000000faf00000-0x000000faffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.2: IO window: 0xd000-0xdfff
pci 0000:00:1c.2: MEM window: 0xfbd00000-0xfbdfffff
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.4: IO window: 0xc000-0xcfff
pci 0000:00:1c.4: MEM window: 0xfbc00000-0xfbcfffff
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.5: IO window: 0xb000-0xbfff
pci 0000:00:1c.5: MEM window: 0xfbb00000-0xfbbfffff
pci 0000:00:1c.5: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
pci 0000:00:1e.0: IO window: 0xe000-0xefff
pci 0000:00:1e.0: MEM window: 0xfbe00000-0xfbefffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:03: resource 0 io: [0xa000-0xafff]
pci_bus 0000:03: resource 1 mem: [0xfba00000-0xfbafffff]
pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:07: resource 2 pref mem [0xfaf00000-0xfaffffff]
pci_bus 0000:06: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:06: resource 1 mem: [0xfbd00000-0xfbdfffff]
pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:05: resource 1 mem: [0xfbc00000-0xfbcfffff]
pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:04: resource 1 mem: [0xfbb00000-0xfbbfffff]
pci_bus 0000:08: resource 0 io: [0xe000-0xefff]
pci_bus 0000:08: resource 1 mem: [0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 3 io: [0x00-0xffff]
pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5261k freed
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/O].
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 24028
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
pci 0000:03:00.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.5: setting latency timer to 64
Linux agpgart interface v0.103
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010100000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver
jmicron 0000:05:00.1: IDE controller (0x197b:0x2363 rev 0x03)
pci 0000:05:00.1: enabling device (0000 -> 0001)
pci 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
jmicron 0000:05:00.1: 100% native mode on irq 17
pci 0000:05:00.1: setting latency timer to 64
ide0: BM-DMA at 0xc400-0xc407
ide1: BM-DMA at 0xc408-0xc40f
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0xcc00-0xcc07,0xc882 on irq 17
ide1 at 0xc800-0xc807,0xc482 on irq 17
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide2...
ide2: no devices on the port
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide3...
ide3: no devices on the port
ide3 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
SCSI Media Changer driver v0.25
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.4
aoe: AoE v47 initialised.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Freeing unused kernel memory: 412k freed
Write protecting the kernel read-only data: 4796k
input: AT Translated Set 2 keyboard as /class/input/input1
libata version 3.00 loaded.
Error: Driver 'pata_platform' is already registered, aborting...
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb9fc000 port 0xfb9fc100 irq 20
ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 20
ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:05:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100, ATAPI AN
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 1:0:0:0: [sda] Attached SCSI disk
input: PS/2 Generic Mouse as /class/input/input2
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 2:0:0:0: [sdb] Attached SCSI disk
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
sd 3:0:0:0: [sdc] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1
sd 4:0:0:0: [sdd] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 5:0:0:0: [sde] Attached SCSI disk
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: Attached scsi generic sg5 type 0
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
Fusion MPT base driver 3.04.10
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.10
Fusion MPT FC Host driver 3.04.10
Fusion MPT SAS Host driver 3.04.10
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[2461]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
QLogic Fibre Channel HBA Driver: 8.03.01-k4
Emulex LightPulse Fibre Channel SCSI driver 8.3.3
Copyright(c) 2004-2009 Emulex. All rights reserved.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-gentoo-r6 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-gentoo-r6 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.31-gentoo-r6 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
ohci1394 0000:08:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fbeff000-fbeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
md: raid0 personality registered for level 0
usb 3-2: new full speed USB device using uhci_hcd and address 2
md: raid1 personality registered for level 1
usb 3-2: New USB device found, idVendor=051d, idProduct=0002
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
usb 3-2: Manufacturer: American Power Conversion
usb 3-2: SerialNumber: 3B1007X44377
usb 3-2: configuration #1 chosen from 1 choice
raid6: int64x1 3337 MB/s
generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
raid6: int64x2 4267 MB/s
usb 8-2: new low speed USB device using uhci_hcd and address 2
raid6: int64x4 3033 MB/s
usb 8-2: New USB device found, idVendor=045e, idProduct=0039
usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
usb 8-2: Manufacturer: Microsoft
usb 8-2: configuration #1 chosen from 1 choice
raid6: int64x8 2888 MB/s
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input3
generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
raid6: sse2x1 8296 MB/s
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000f332f7]
raid6: sse2x2 9679 MB/s
raid6: sse2x4 10714 MB/s
raid6: using algorithm sse2x4 (10714 MB/s)
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 12672.800 MB/sec
xor: using function: generic_sse (12672.800 MB/sec)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
fuse init (API version 7.12)
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
EXT4-fs (/dev/sr0): Update your userspace programs to mount using ext4
EXT4-fs (/dev/sr0): ext4dev backwards compatibility will go away by 2.6.31
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
udev: starting version 146
<3>udev: missing sysfs features; please update the kernel or disable the kernel's CONFIG_SYSFS_DEPRECATED option; udev may fail to work correctly
Real Time Clock Driver v1.12b
warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sky2 driver version 1.23
sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
sky2 0000:06:00.0: setting latency timer to 64
sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
sky2 eth0: addr e0:cb:4e:97:7a:09
sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sky2 0000:04:00.0: setting latency timer to 64
sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
sky2 eth1: addr e0:cb:4e:97:80:fd
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
HDA Intel 0000:03:00.1: setting latency timer to 64
ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
processor LNXCPU:08: registered as cooling_device8
processor LNXCPU:09: registered as cooling_device9
processor LNXCPU:0a: registered as cooling_device10
processor LNXCPU:0b: registered as cooling_device11
input: Power Button as /class/input/input4
ACPI: Power Button [PWRF]
input: Power Button as /class/input/input5
ACPI: Power Button [PWRB]
sky2 eth0: enabling interface
sky2 eth1: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-05 6:30 ` Tejun Heo
@ 2010-07-05 16:56 ` Mark Knecht
2010-07-06 6:33 ` Tejun Heo
0 siblings, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-05 16:56 UTC (permalink / raw)
To: Tejun Heo; +Cc: Linux Kernel List, linux-ide
On Sun, Jul 4, 2010 at 11:30 PM, Tejun Heo <tj@kernel.org> wrote:
> On 07/03/2010 06:42 PM, Mark Knecht wrote:
>> On Sat, Jul 3, 2010 at 9:13 AM, Tejun Heo <tj@kernel.org> wrote:
>>> Hello,
>>>
>>> On 07/03/2010 06:06 PM, Mark Knecht wrote:
>>>>> Can you please *attach* full logs of a successful boot and several
>>>>> failing boots?
>>>>
>>>> Certainly? Which logs? dmesg or something else?
>>>
>>> dmesg output preferably with printk timestamp enabled.
>
> Can you please apply the attached patch, reproduce the problem and
> post the kernel log?
>
> Thanks.
>
> --
> tejun
>
I'm sorry. What am I patching? I'm not a kernel developer - not even a
programmer - so I'll need some help with this. What's the command I
should use?
c2stable src # ls -la /usr/src/
total 32
drwxr-xr-x 8 root root 4096 Jul 2 09:56 .
drwxr-xr-x 14 root root 4096 Apr 15 07:46 ..
-rw-r--r-- 1 root root 0 Mar 24 18:37 .keep
lrwxrwxrwx 1 root root 22 Jul 2 09:56 linux ->
linux-2.6.34-gentoo-r1
drwxr-xr-x 23 root root 4096 Jun 16 07:23 linux-2.6.32-gentoo-r7
drwxr-xr-x 24 root root 4096 Jun 16 08:42 linux-2.6.34-gentoo
drwxr-xr-x 24 root root 4096 Jul 3 15:30 linux-2.6.34-gentoo-r1
drwxr-xr-x 21 root root 4096 Jun 27 13:12 linux-2.6.34-rc3
drwxr-xr-x 20 root root 4096 Jun 15 08:05 linux-2.6.34-rc5
drwxr-xr-x 20 root root 4096 Jun 27 13:13 linux-2.6.35-rc3
c2stable src #
Thanks,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-05 16:48 ` Mark Knecht
@ 2010-07-05 23:59 ` Robert Hancock
2010-07-06 4:16 ` Mark Knecht
2010-07-06 6:32 ` Tejun Heo
1 sibling, 1 reply; 55+ messages in thread
From: Robert Hancock @ 2010-07-05 23:59 UTC (permalink / raw)
To: Mark Knecht; +Cc: Tejun Heo, Stan Hoeppner, Linux Kernel List, linux-ide
On 07/05/2010 10:48 AM, Mark Knecht wrote:
> On Sun, Jul 4, 2010 at 11:19 PM, Tejun Heo<tj@kernel.org> wrote:
>> Hello,
>>
>> On 07/04/2010 12:31 AM, Mark Knecht wrote:
>>> OK, I don't know if this is related but so far I cannot get the
>>> machine to boot if I set BIOS SATA configuration to AHCI. I believe
>>> that I have AHCI support as well as SATA support built into the kernel
>>> but when I set the BIOS to AHCI the machine just hangs saying it finds
>>> no medium. I assume that means no hard drive. I have to set SATA
>>> support to enhanced and then IDE to get the machine to boot at all.
>>
>> That's odd. Can you please attach kernel boot log w/ ahci mode?
>> Booting a recent live CD and saving boot log from there should do the
>> trick.
>>
>> Thanks.
>>
>> --
>> tejun
>>
>
> Hi Tehun,
> Thanks for the help.
>
> I tried a Gentoo install CD from last march. It's a 2.6.31 type
> kernel. Problem is the buffer depths are not big enough to capture the
> complete dmesg contents and I don't know a command line option to make
> it larger on the fly. If you know of one that's got a larger buffer -
> or a command to increase it at boot time - then let me know and I'll
> try again.
>
> I'm attaching what I was able to catch for both AHCI and IDE
> settings in BIOS for the storage configuration option.
>
> It seems to me that even in AHCI mode the machine does see all the
> hard drives. Maybe there's something about my boot partition that's
> having problems in AHCI mode only? If it sees /dev/sda then why
> wouldn't it find grub and at least show a grub menu?
On some machines changing from IDE to AHCI messes up the boot order
selection in the BIOS - you may have to switch to AHCI, save settings,
reboot, go back into the BIOS and then make sure the disk boot order
settings are correct (whatever drive grub is installed on needs to be
first).
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-05 23:59 ` Robert Hancock
@ 2010-07-06 4:16 ` Mark Knecht
2010-07-06 6:13 ` Stan Hoeppner
2010-07-06 11:26 ` Sander
0 siblings, 2 replies; 55+ messages in thread
From: Mark Knecht @ 2010-07-06 4:16 UTC (permalink / raw)
To: Robert Hancock; +Cc: Tejun Heo, Stan Hoeppner, Linux Kernel List, linux-ide
On Mon, Jul 5, 2010 at 4:59 PM, Robert Hancock <hancockrwd@gmail.com> wrote:
> On 07/05/2010 10:48 AM, Mark Knecht wrote:
>>
>> On Sun, Jul 4, 2010 at 11:19 PM, Tejun Heo<tj@kernel.org> wrote:
>>>
>>> Hello,
>>>
>>> On 07/04/2010 12:31 AM, Mark Knecht wrote:
>>>>
>>>> OK, I don't know if this is related but so far I cannot get the
>>>> machine to boot if I set BIOS SATA configuration to AHCI. I believe
>>>> that I have AHCI support as well as SATA support built into the kernel
>>>> but when I set the BIOS to AHCI the machine just hangs saying it finds
>>>> no medium. I assume that means no hard drive. I have to set SATA
>>>> support to enhanced and then IDE to get the machine to boot at all.
>>>
>>> That's odd. Can you please attach kernel boot log w/ ahci mode?
>>> Booting a recent live CD and saving boot log from there should do the
>>> trick.
>>>
>>> Thanks.
>>>
>>> --
>>> tejun
>>>
>>
>> Hi Tehun,
>> Thanks for the help.
>>
>> I tried a Gentoo install CD from last march. It's a 2.6.31 type
>> kernel. Problem is the buffer depths are not big enough to capture the
>> complete dmesg contents and I don't know a command line option to make
>> it larger on the fly. If you know of one that's got a larger buffer -
>> or a command to increase it at boot time - then let me know and I'll
>> try again.
>>
>> I'm attaching what I was able to catch for both AHCI and IDE
>> settings in BIOS for the storage configuration option.
>>
>> It seems to me that even in AHCI mode the machine does see all the
>> hard drives. Maybe there's something about my boot partition that's
>> having problems in AHCI mode only? If it sees /dev/sda then why
>> wouldn't it find grub and at least show a grub menu?
>
> On some machines changing from IDE to AHCI messes up the boot order
> selection in the BIOS - you may have to switch to AHCI, save settings,
> reboot, go back into the BIOS and then make sure the disk boot order
> settings are correct (whatever drive grub is installed on needs to be
> first).
>
That's a very interesting idea Robert. Thanks.
I'll have to be careful. I have 5 identical drives in the machine so
figuring out which is which when I'm in BIOS might be a bit of a
trick.
I'll give it a go and report back.
Cheers,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-06 4:16 ` Mark Knecht
@ 2010-07-06 6:13 ` Stan Hoeppner
2010-07-06 11:26 ` Sander
1 sibling, 0 replies; 55+ messages in thread
From: Stan Hoeppner @ 2010-07-06 6:13 UTC (permalink / raw)
To: Mark Knecht; +Cc: Robert Hancock, Tejun Heo, Linux Kernel List, linux-ide
Mark Knecht put forth on 7/5/2010 11:16 PM:
> I'll have to be careful. I have 5 identical drives in the machine so
> figuring out which is which when I'm in BIOS might be a bit of a
> trick.
Makes you yearn for the good old days of SCSI don't it? :(
--
Stan
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-05 16:48 ` Mark Knecht
2010-07-05 23:59 ` Robert Hancock
@ 2010-07-06 6:32 ` Tejun Heo
1 sibling, 0 replies; 55+ messages in thread
From: Tejun Heo @ 2010-07-06 6:32 UTC (permalink / raw)
To: Mark Knecht; +Cc: Stan Hoeppner, Linux Kernel List, linux-ide
On 07/05/2010 06:48 PM, Mark Knecht wrote:
> I tried a Gentoo install CD from last march. It's a 2.6.31 type
> kernel. Problem is the buffer depths are not big enough to capture the
> complete dmesg contents and I don't know a command line option to make
> it larger on the fly. If you know of one that's got a larger buffer -
> or a command to increase it at boot time - then let me know and I'll
> try again.
>
> I'm attaching what I was able to catch for both AHCI and IDE
> settings in BIOS for the storage configuration option.
That's enough.
> It seems to me that even in AHCI mode the machine does see all the
> hard drives. Maybe there's something about my boot partition that's
> having problems in AHCI mode only? If it sees /dev/sda then why
> wouldn't it find grub and at least show a grub menu?
The ahci driver is working fine. If the system can't boot w/ ahci
mode, the problem is probably on the bios side and most likely caused
by getting the boot device wrong as Robert suggested. Just choose one
after another until it boots should do the trick.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-05 16:56 ` Mark Knecht
@ 2010-07-06 6:33 ` Tejun Heo
2010-07-06 18:13 ` Mark Knecht
0 siblings, 1 reply; 55+ messages in thread
From: Tejun Heo @ 2010-07-06 6:33 UTC (permalink / raw)
To: Mark Knecht; +Cc: Linux Kernel List, linux-ide
Hello,
On 07/05/2010 06:56 PM, Mark Knecht wrote:
>>>> dmesg output preferably with printk timestamp enabled.
>>
>> Can you please apply the attached patch, reproduce the problem and
>> post the kernel log?
>
> I'm sorry. What am I patching? I'm not a kernel developer - not even a
> programmer - so I'll need some help with this. What's the command I
> should use?
>
> c2stable src # ls -la /usr/src/
> total 32
> drwxr-xr-x 8 root root 4096 Jul 2 09:56 .
> drwxr-xr-x 14 root root 4096 Apr 15 07:46 ..
> -rw-r--r-- 1 root root 0 Mar 24 18:37 .keep
> lrwxrwxrwx 1 root root 22 Jul 2 09:56 linux ->
> linux-2.6.34-gentoo-r1
> drwxr-xr-x 23 root root 4096 Jun 16 07:23 linux-2.6.32-gentoo-r7
> drwxr-xr-x 24 root root 4096 Jun 16 08:42 linux-2.6.34-gentoo
> drwxr-xr-x 24 root root 4096 Jul 3 15:30 linux-2.6.34-gentoo-r1
> drwxr-xr-x 21 root root 4096 Jun 27 13:12 linux-2.6.34-rc3
> drwxr-xr-x 20 root root 4096 Jun 15 08:05 linux-2.6.34-rc5
> drwxr-xr-x 20 root root 4096 Jun 27 13:13 linux-2.6.35-rc3
Hmm...
$ cd /usr/src/linux && patch -p1 < PATCH_FILE
should do it. You know how to build and install the compiled kernel,
right?
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-06 4:16 ` Mark Knecht
2010-07-06 6:13 ` Stan Hoeppner
@ 2010-07-06 11:26 ` Sander
1 sibling, 0 replies; 55+ messages in thread
From: Sander @ 2010-07-06 11:26 UTC (permalink / raw)
To: Mark Knecht
Cc: Robert Hancock, Tejun Heo, Stan Hoeppner, Linux Kernel List, linux-ide
Mark Knecht wrote (ao):
> On Mon, Jul 5, 2010 at 4:59 PM, Robert Hancock <hancockrwd@gmail.com> wrote:
> > On some machines changing from IDE to AHCI messes up the boot order
> > selection in the BIOS - you may have to switch to AHCI, save settings,
> > reboot, go back into the BIOS and then make sure the disk boot order
> > settings are correct (whatever drive grub is installed on needs to be
> > first).
>
> That's a very interesting idea Robert. Thanks.
>
> I'll have to be careful. I have 5 identical drives in the machine so
> figuring out which is which when I'm in BIOS might be a bit of a
> trick.
>
> I'll give it a go and report back.
You can install grub on the mbr of all disks and not worry about the
order. Especially if you work with UUIDs.
Sander
--
Humilis IT Services and Solutions
http://www.humilis.net
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-06 6:33 ` Tejun Heo
@ 2010-07-06 18:13 ` Mark Knecht
2010-07-07 5:50 ` Tejun Heo
0 siblings, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-06 18:13 UTC (permalink / raw)
To: Tejun Heo; +Cc: Linux Kernel List, linux-ide
[-- Attachment #1: Type: text/plain, Size: 1289 bytes --]
On Mon, Jul 5, 2010 at 11:33 PM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On 07/05/2010 06:56 PM, Mark Knecht wrote:
>>>>> dmesg output preferably with printk timestamp enabled.
>>>
>>> Can you please apply the attached patch, reproduce the problem and
>>> post the kernel log?
>>
>> I'm sorry. What am I patching? I'm not a kernel developer - not even a
>> programmer - so I'll need some help with this. What's the command I
<SNIP>
>
> Hmm...
>
> $ cd /usr/src/linux && patch -p1 < PATCH_FILE
>
> should do it. You know how to build and install the compiled kernel,
> right?
>
> Thanks.
>
> --
> tejun
>
OK - thanks. The patch seemed to install correctly. I then did
make clean
make && make modules_install
and then a Gentoo command:
modules-rebuild -X rebuild
to pick up any package modules that need to be rebuild when I use a
new kernel. (X drivers, vmware, etc.)
The kernel boots fine:
mark@c2stable ~ $ uname -a
Linux c2stable 2.6.34-gentoo-r1 #4 SMP PREEMPT Tue Jul 6 10:35:15 PDT
2010 x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel
GNU/Linux
mark@c2stable ~ $
I don't know what I'm looking for in the dmesg files but I do see one
message about a SATA Link being down.
Files attached.
Cheers,
Mark
[-- Attachment #2: dmesg.IDEAllDrives --]
[-- Type: application/octet-stream, Size: 62356 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #4 SMP PREEMPT Tue Jul 6 10:35:15 PDT 2010
[ 0.000000] Command line: root=/dev/md5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 1G
[ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000
[ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143439
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 12
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] early_res array is doubled to 64 at [14000 - 147ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
[ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
[ 0.000000] Kernel command line: root=/dev/md5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] early_res array is doubled to 128 at [14800 - 157ff]
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (60 early reservations)
[ 0.000000] #1 [0001000000 - 0001771144] TEXT DATA BSS
[ 0.000000] #2 [0001772000 - 0001772298] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved
[ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM
[ 0.000000] #11 [0001771180 - 0001771780] BOOTMEM
[ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM
[ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM
[ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0
[ 0.000000] #15 [0001771780 - 0001771900] BOOTMEM
[ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM
[ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM
[ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM
[ 0.000000] #19 [0001771900 - 0001771941] BOOTMEM
[ 0.000000] #20 [0001771980 - 0001771a06] BOOTMEM
[ 0.000000] #21 [0001771a40 - 0001771ca8] BOOTMEM
[ 0.000000] #22 [0001771cc0 - 0001771d28] BOOTMEM
[ 0.000000] #23 [0001771d40 - 0001771da8] BOOTMEM
[ 0.000000] #24 [0001771dc0 - 0001771e28] BOOTMEM
[ 0.000000] #25 [0001771e40 - 0001771ea8] BOOTMEM
[ 0.000000] #26 [0001771ec0 - 0001771f28] BOOTMEM
[ 0.000000] #27 [0001771f40 - 0001771fa8] BOOTMEM
[ 0.000000] #28 [00017a32c0 - 00017a3328] BOOTMEM
[ 0.000000] #29 [00017a3340 - 00017a33a8] BOOTMEM
[ 0.000000] #30 [00017a33c0 - 00017a3428] BOOTMEM
[ 0.000000] #31 [00017a3440 - 00017a34a8] BOOTMEM
[ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM
[ 0.000000] #33 [00017a34c0 - 00017a34ce] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM
[ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM
[ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM
[ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM
[ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM
[ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM
[ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM
[ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM
[ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM
[ 0.000000] #46 [00017a3500 - 00017a3508] BOOTMEM
[ 0.000000] #47 [00017a3540 - 00017a3548] BOOTMEM
[ 0.000000] #48 [00017a3580 - 00017a35b0] BOOTMEM
[ 0.000000] #49 [00017a35c0 - 00017a3620] BOOTMEM
[ 0.000000] #50 [00017a3640 - 00017a3750] BOOTMEM
[ 0.000000] #51 [00017a3780 - 00017a37c8] BOOTMEM
[ 0.000000] #52 [00017a3800 - 00017a3848] BOOTMEM
[ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM
[ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM
[ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM
[ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM
[ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM
[ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM
[ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 12302060k/13631488k available (3630k kernel code, 1057732k absent, 271696k reserved, 2958k data, 476k init)
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3337.796 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6675.59 BogoMIPS (lpj=3337796)
[ 0.000292] Security Framework initialized
[ 0.000430] Mount-cache hash table entries: 256
[ 0.000636] CPU: Physical Processor ID: 0
[ 0.000760] CPU: Processor Core ID: 0
[ 0.000886] mce: CPU supports 9 MCE banks
[ 0.001020] CPU0: Thermal monitoring enabled (TM1)
[ 0.001152] using mwait in idle threads.
[ 0.001283] Performance Events: Westmere events, Intel PMU driver.
[ 0.001463] ... version: 3
[ 0.001586] ... bit width: 48
[ 0.001710] ... generic registers: 4
[ 0.001833] ... value mask: 0000ffffffffffff
[ 0.001960] ... max period: 000000007fffffff
[ 0.002085] ... fixed-purpose events: 3
[ 0.002215] ... event mask: 000000070000000f
[ 0.002361] Freeing SMP alternatives: 36k freed
[ 0.002490] ACPI: Core revision 20100121
[ 0.041854] Setting APIC routing to physical flat
[ 0.042420] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052523] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
[ 0.157790] APIC calibration not consistent with PM-Timer: 103ms instead of 100ms
[ 0.158015] APIC delta adjusted to PM-Timer: 834372 (867738)
[ 0.164141] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
[ 1.201382] Brought up 12 CPUs
[ 1.201505] Total of 12 processors activated (81028.69 BogoMIPS).
[ 1.208015] NET: Registered protocol family 16
[ 1.208285] ACPI: bus type pci registered
[ 1.208468] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.208691] PCI: not using MMCONFIG
[ 1.208813] PCI: Using configuration type 1 for base access
[ 1.210823] bio: create slab <bio-0> at 0
[ 1.212149] ACPI: EC: Look up EC in DSDT
[ 1.213277] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.293487] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.294317] ACPI: Interpreter enabled
[ 1.294440] ACPI: (supports S0 S5)
[ 1.294616] ACPI: Using IOAPIC for interrupt routing
[ 1.294780] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.296574] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.321262] ACPI: No dock devices found.
[ 1.321386] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.321714] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.322057] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.322185] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.322313] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.322532] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.322753] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.322974] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.323237] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.323239] pci 0000:00:00.0: PME# disabled
[ 1.323281] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.323283] pci 0000:00:01.0: PME# disabled
[ 1.323326] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.323328] pci 0000:00:03.0: PME# disabled
[ 1.323371] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.323373] pci 0000:00:07.0: PME# disabled
[ 1.323541] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
[ 1.323594] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
[ 1.323646] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
[ 1.323697] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 1.323743] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.323746] pci 0000:00:1a.7: PME# disabled
[ 1.323773] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 1.323806] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.323808] pci 0000:00:1b.0: PME# disabled
[ 1.323859] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.323862] pci 0000:00:1c.0: PME# disabled
[ 1.323915] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.323917] pci 0000:00:1c.2: PME# disabled
[ 1.323971] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.323973] pci 0000:00:1c.4: PME# disabled
[ 1.324027] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.324030] pci 0000:00:1c.5: PME# disabled
[ 1.324069] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
[ 1.324122] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
[ 1.324174] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
[ 1.324226] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 1.324271] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.324274] pci 0000:00:1d.7: PME# disabled
[ 1.324368] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 1.324590] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.324720] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.324979] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
[ 1.324983] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
[ 1.324989] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
[ 1.324993] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
[ 1.324997] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
[ 1.325001] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
[ 1.325037] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 1.325047] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.325077] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
[ 1.325081] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
[ 1.325085] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
[ 1.325089] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
[ 1.325093] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
[ 1.325097] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
[ 1.325147] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.325273] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.325275] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.325279] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.325306] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.325431] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.325434] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.325437] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.325478] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.325485] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[ 1.325489] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
[ 1.325495] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[ 1.325509] pci 0000:03:00.0: supports D1 D2
[ 1.325531] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[ 1.325558] pci 0000:03:00.1: supports D1 D2
[ 1.325568] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.325694] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.325697] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.325700] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.325732] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.325858] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.325861] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.325865] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.325932] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.325938] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.325961] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.325997] pci 0000:06:00.0: supports D1 D2
[ 1.325998] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.326002] pci 0000:06:00.0: PME# disabled
[ 1.326011] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.326138] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.326140] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.326145] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.326242] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 1.326276] pci 0000:05:00.0: PME# supported from D3hot
[ 1.326280] pci 0000:05:00.0: PME# disabled
[ 1.326319] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.326327] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
[ 1.326334] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
[ 1.326342] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.326349] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.326401] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.326528] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.326531] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.326535] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.326599] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 1.326606] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.326628] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 1.326663] pci 0000:04:00.0: supports D1 D2
[ 1.326664] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.326668] pci 0000:04:00.0: PME# disabled
[ 1.326677] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.326803] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.326806] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.326810] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.326848] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 1.326854] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
[ 1.326890] pci 0000:08:02.0: supports D2
[ 1.326891] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 1.326894] pci 0000:08:02.0: PME# disabled
[ 1.326930] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.327062] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.327064] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.327068] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.327070] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.327071] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.327073] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.327074] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.327076] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.327077] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.327101] pci_bus 0000:00: on NUMA node 0
[ 1.327105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.327335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.327410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.327455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.327500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.327552] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.327594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.327636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.327678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.348051] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.348534] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.348816] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.349301] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.349782] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.350267] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.350748] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.351232] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.351807] SCSI subsystem initialized
[ 1.352042] libata version 3.00 loaded.
[ 1.352126] usbcore: registered new interface driver usbfs
[ 1.352269] usbcore: registered new interface driver hub
[ 1.352416] usbcore: registered new device driver usb
[ 1.352648] PCI: Using ACPI for IRQ routing
[ 1.352772] PCI: pci_cache_line_size set to 64 bytes
[ 1.352854] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.352856] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.352927] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.353176] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.360163] Switching to clocksource tsc
[ 1.360711] pnp: PnP ACPI init
[ 1.360836] ACPI: bus type pnp registered
[ 1.363424] pnp: PnP ACPI: found 17 devices
[ 1.363547] ACPI: ACPI bus type pnp unregistered
[ 1.363677] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.363803] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.363933] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.364060] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.364187] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.364314] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.364444] system 00:07: [io 0x0290-0x029f] has been reserved
[ 1.364571] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.364697] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.364822] system 00:08: [io 0x0500-0x057f] could not be reserved
[ 1.364951] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.365078] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.365204] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.365333] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.365461] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.365589] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.365717] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.365846] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.365975] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.366102] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.366229] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.366356] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.371346] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.371474] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.371693] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.371915] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.372135] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.372261] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.372385] pci 0000:00:01.0: bridge window [io disabled]
[ 1.372512] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.372637] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.372765] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.372889] pci 0000:00:03.0: bridge window [io disabled]
[ 1.373017] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.373143] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.373271] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.373396] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.373523] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.373651] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.373872] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.373999] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.374127] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.374255] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.374477] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.374602] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.374729] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.374858] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.375082] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.375207] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.375334] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.375462] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.375684] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.375809] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.375939] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.376067] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.376290] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.376414] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.376542] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.376670] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.376804] pci 0000:00:01.0: setting latency timer to 64
[ 1.376809] pci 0000:00:03.0: setting latency timer to 64
[ 1.376814] pci 0000:00:07.0: setting latency timer to 64
[ 1.376819] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.376951] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.377079] pci 0000:00:1c.0: setting latency timer to 64
[ 1.377085] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.377213] pci 0000:00:1c.2: setting latency timer to 64
[ 1.377219] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.377346] pci 0000:00:1c.4: setting latency timer to 64
[ 1.377353] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.377481] pci 0000:00:1c.5: setting latency timer to 64
[ 1.377485] pci 0000:00:1e.0: setting latency timer to 64
[ 1.377488] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.377489] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.377490] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.377491] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.377493] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.377494] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.377496] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 1.377497] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.377498] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.377500] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.377501] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.377502] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.377503] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.377505] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.377506] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.377507] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.377509] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.377510] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.377511] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.377512] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.377514] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.377515] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 1.377516] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.377518] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.377519] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.377520] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.377521] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.377523] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.377524] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.377566] NET: Registered protocol family 2
[ 1.377740] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.378415] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.379091] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.379317] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.379444] TCP reno registered
[ 1.379566] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.379725] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.379968] NET: Registered protocol family 1
[ 1.380236] RPC: Registered udp transport module.
[ 1.380359] RPC: Registered tcp transport module.
[ 1.380482] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.380748] pci 0000:03:00.0: Boot video device
[ 1.380761] PCI: CLS 256 bytes, default 64
[ 1.380786] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.380915] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
[ 1.381135] software IO TLB at phys 0xe000000 - 0x12000000
[ 1.383321] VFS: Disk quotas dquot_6.5.2
[ 1.383462] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.383846] NTFS driver 2.1.29 [Flags: R/W].
[ 1.384011] fuse init (API version 7.13)
[ 1.384183] msgmni has been set to 24027
[ 1.384537] alg: No test for stdrng (krng)
[ 1.384695] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.384921] io scheduler noop registered
[ 1.385044] io scheduler deadline registered
[ 1.385181] io scheduler cfq registered (default)
[ 1.385369] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.385393] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.385455] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.385478] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.385537] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.385562] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.385624] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.385651] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.385734] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.385762] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.385843] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.385872] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.385956] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.385984] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.386081] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.386085] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.386088] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.387585] Non-volatile memory driver v1.3
[ 1.387801] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.388023] ACPI: Power Button [PWRB]
[ 1.388178] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.388397] ACPI: Power Button [PWRF]
[ 1.389025] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.390285] brd: module loaded
[ 1.390826] loop: module loaded
[ 1.391063] ahci 0000:05:00.0: version 3.0
[ 1.391076] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.401341] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.404183] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.404313] ahci 0000:05:00.0: setting latency timer to 64
[ 1.404392] scsi0 : ahci
[ 1.404593] scsi1 : ahci
[ 1.404785] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.405006] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.405267] ata_piix 0000:00:1f.2: version 2.13
[ 1.405276] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.405405] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.405674] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.405705] scsi2 : ata_piix
[ 1.405886] scsi3 : ata_piix
[ 1.407271] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[ 1.407402] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[ 1.407544] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.407675] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.407940] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.407960] scsi4 : ata_piix
[ 1.408139] scsi5 : ata_piix
[ 1.409324] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[ 1.409453] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[ 1.409666] console [netcon0] enabled
[ 1.409788] netconsole: network logging started
[ 1.409970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.410108] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.410242] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.410245] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.410408] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.410647] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.414657] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.414666] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.424256] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.424402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.424530] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.424749] usb usb1: Product: EHCI Host Controller
[ 1.424872] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.424998] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.425192] hub 1-0:1.0: USB hub found
[ 1.425318] hub 1-0:1.0: 6 ports detected
[ 1.425481] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.425615] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.425618] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.425774] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.426009] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.429995] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.430004] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.439218] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.439358] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.439486] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.439704] usb usb2: Product: EHCI Host Controller
[ 1.439828] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.439954] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.440144] hub 2-0:1.0: USB hub found
[ 1.440268] hub 2-0:1.0: 6 ports detected
[ 1.440444] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.440591] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.440733] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.440863] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.440865] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.441024] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.441262] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.441406] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.441536] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.441754] usb usb3: Product: UHCI Host Controller
[ 1.441877] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.442003] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.442193] hub 3-0:1.0: USB hub found
[ 1.442317] hub 3-0:1.0: 2 ports detected
[ 1.442470] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.442600] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.442602] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.442760] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.443002] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.443146] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.443272] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.443494] usb usb4: Product: UHCI Host Controller
[ 1.443617] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.443743] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.443931] hub 4-0:1.0: USB hub found
[ 1.444055] hub 4-0:1.0: 2 ports detected
[ 1.444205] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.444335] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.444337] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.444497] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.444740] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.444883] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.445009] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.445227] usb usb5: Product: UHCI Host Controller
[ 1.445351] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.445479] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.445669] hub 5-0:1.0: USB hub found
[ 1.445793] hub 5-0:1.0: 2 ports detected
[ 1.445943] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.446072] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.446074] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.446231] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.446471] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.446614] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.446741] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.446959] usb usb6: Product: UHCI Host Controller
[ 1.447083] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.447209] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.447400] hub 6-0:1.0: USB hub found
[ 1.447523] hub 6-0:1.0: 2 ports detected
[ 1.447674] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.447803] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.447805] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.447963] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.448201] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.448344] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.448474] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.448692] usb usb7: Product: UHCI Host Controller
[ 1.448815] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.448941] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.449131] hub 7-0:1.0: USB hub found
[ 1.449254] hub 7-0:1.0: 2 ports detected
[ 1.449406] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.449536] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.449538] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.449697] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.449934] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.450077] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.450204] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.450425] usb usb8: Product: UHCI Host Controller
[ 1.450549] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.450674] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.450863] hub 8-0:1.0: USB hub found
[ 1.450987] hub 8-0:1.0: 2 ports detected
[ 1.451153] Initializing USB Mass Storage driver...
[ 1.451316] usbcore: registered new interface driver usb-storage
[ 1.451444] USB Mass Storage support registered.
[ 1.451604] usbcore: registered new interface driver libusual
[ 1.451782] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.453568] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.453695] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.453870] mice: PS/2 mouse device common for all mice
[ 1.454099] i2c /dev entries driver
[ 1.454263] md: raid0 personality registered for level 0
[ 1.454388] md: raid1 personality registered for level 1
[ 1.454604] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.454826] cpuidle: using governor ladder
[ 1.454949] cpuidle: using governor menu
[ 1.455191] usbcore: registered new interface driver hiddev
[ 1.455339] usbcore: registered new interface driver usbhid
[ 1.455465] usbhid: USB HID core driver
[ 1.455746] TCP cubic registered
[ 1.455868] NET: Registered protocol family 17
[ 1.456397] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.471089] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.708549] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.708553] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.812253] ata6: link resume succeeded after 1 retries
[ 1.812256] ata5: link resume succeeded after 1 retries
[ 2.042662] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.064650] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.064667] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.067908] ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.068051] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.068056] ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.068058] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.071890] ata5.00: configured for UDMA/133
[ 2.074158] ata6.00: configured for UDMA/133
[ 2.204376] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.204512] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.204639] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
[ 2.204767] usb 3-2: Manufacturer: American Power Conversion
[ 2.204892] usb 3-2: SerialNumber: 3B1007X44377
[ 2.288260] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
[ 2.351921] ata3.00: SATA link down (SStatus 0 SControl 301)
[ 2.352061] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.366906] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.369657] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.370874] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.371019] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.376902] ata3.01: configured for UDMA/133
[ 2.377085] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.377253] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.377254] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.377458] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.377460] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.377924] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.377942] sd 2:0:1:0: Attached scsi generic sg0 type 0
[ 2.378301] sd 2:0:1:0: [sda] Write Protect is off
[ 2.378426] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.378438] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.378726] sda:
[ 2.383091] ata4.00: configured for UDMA/133
[ 2.387945] sda1 sda2 sda3 sda4 <
[ 2.390381] ata4.01: configured for UDMA/133
[ 2.390663] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.390980] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.391012] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.391071] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.391175] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.391203] sd 3:0:1:0: Attached scsi generic sg2 type 0
[ 2.391211] sd 3:0:1:0: [sdc] Write Protect is off
[ 2.391213] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.391228] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.391281] scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.391295] sdc:
[ 2.391380] sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.391405] sd 4:0:0:0: [sdd] Write Protect is off
[ 2.391406] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.391411] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.391417] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.391476] sdd:
[ 2.391576] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.391668] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.391693] sd 5:0:0:0: [sde] Write Protect is off
[ 2.391694] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.391702] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2.391705] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.391773] sde: sda5 sdd1
[ 2.396105] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 2.403195] sde1
[ 2.403482] sd 5:0:0:0: [sde] Attached SCSI disk
[ 2.406378] sda6 >
[ 2.406623] sdc1
[ 2.406633] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.406635] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.406645] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.407115] sdc2 sdc3 sdc4 < sdc5
[ 2.419324] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.429255] sdc6 >
[ 2.444492] sdb:
[ 2.457151] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 2.457394] sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
[ 2.493498] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.499011] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.662847] usb 8-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.662982] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.663113] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.663241] usb 8-2: Manufacturer: Microsoft
[ 2.680939] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.681249] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 4.573939] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.581438] md: Waiting for all devices to be available before autodetect
[ 4.581566] md: If you don't use raid, use raid=noautodetect
[ 4.581776] md: Autodetecting RAID arrays.
[ 4.646469] md: Scanned 6 and added 6 devices.
[ 4.646601] md: autorun ...
[ 4.646722] md: considering sdb5 ...
[ 4.646845] md: adding sdb5 ...
[ 4.646970] md: sdb3 has different UUID to sdb5
[ 4.647095] md: adding sdc5 ...
[ 4.647217] md: sdc3 has different UUID to sdb5
[ 4.647342] md: adding sda5 ...
[ 4.647464] md: sda3 has different UUID to sdb5
[ 4.647668] md: created md5
[ 4.647789] md: bind<sda5>
[ 4.647914] md: bind<sdc5>
[ 4.648041] md: bind<sdb5>
[ 4.648164] md: running: <sdb5><sdc5><sda5>
[ 4.648456] raid1: raid set md5 active with 3 out of 3 mirrors
[ 4.648594] md5: detected capacity change from 0 to 53694496768
[ 4.648741] md: considering sdb3 ...
[ 4.648864] md: adding sdb3 ...
[ 4.648990] md: adding sdc3 ...
[ 4.649112] md: adding sda3 ...
[ 4.649312] md: created md3
[ 4.649433] md: bind<sda3>
[ 4.649558] md: bind<sdc3>
[ 4.649682] md: bind<sdb3>
[ 4.649805] md: running: <sdb3><sdc3><sda3>
[ 4.650092] raid1: raid set md3 active with 3 out of 3 mirrors
[ 4.650228] md3: detected capacity change from 0 to 53694562304
[ 4.650374] md: ... autorun DONE.
[ 4.650530] md5: unknown partition table
[ 4.689954] kjournald starting. Commit interval 5 seconds
[ 4.689960] EXT3-fs (md5): mounted filesystem with writeback data mode
[ 4.689971] VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
[ 4.690344] Freeing unused kernel memory: 476k freed
[ 4.690524] Write protecting the kernel read-only data: 6144k
[ 4.690730] Freeing unused kernel memory: 448k freed
[ 4.690928] Freeing unused kernel memory: 248k freed
[ 6.569411] udev: starting version 149
[ 6.690502] md3: unknown partition table
[ 6.773971] rtc_cmos 00:03: RTC can wake from S4
[ 6.774001] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.774024] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.882701] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.882704] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f 64bit window disabled]
[ 6.882706] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.941923] sky2: driver version 1.27
[ 6.941945] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.941954] sky2 0000:06:00.0: setting latency timer to 64
[ 6.941984] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.942068] sky2 0000:06:00.0: irq 55 for MSI/MSI-X
[ 6.942289] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
[ 6.942305] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.942314] sky2 0000:04:00.0: setting latency timer to 64
[ 6.942334] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.942417] sky2 0000:04:00.0: irq 56 for MSI/MSI-X
[ 6.942584] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
[ 7.018360] Linux agpgart interface v0.103
[ 7.061931] [drm] Initialized drm 1.1.0 20060810
[ 7.133990] [drm] radeon defaulting to kernel modesetting.
[ 7.133992] [drm] radeon kernel modesetting enabled.
[ 7.134026] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 7.134029] radeon 0000:03:00.0: setting latency timer to 64
[ 7.134890] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[ 7.135082] [drm] register mmio base: 0xFBAC0000
[ 7.135083] [drm] register mmio size: 131072
[ 7.135150] ATOM BIOS: JUNIPER
[ 7.135159] [drm] Clocks initialized !
[ 7.135160] [drm] 1 Power State(s)
[ 7.135161] [drm] State 0 Default (default)
[ 7.135162] [drm] 16 PCIE Lanes
[ 7.135163] [drm] 1 Clock Mode(s)
[ 7.135164] [drm] 0 engine/memory: 850000/1200000
[ 7.135168] [drm] radeon: power management initialized
[ 7.135173] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 7.135175] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 7.135186] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 7.135247] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.135248] [drm] RAM width 128bits DDR
[ 7.135270] [TTM] Zone kernel: Available graphics memory: 6151634 kiB.
[ 7.135271] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 7.135278] [drm] radeon: 256M of VRAM memory ready
[ 7.135279] [drm] radeon: 512M of GTT memory ready.
[ 7.136626] [drm] Radeon Display Connectors
[ 7.136628] [drm] Connector 0:
[ 7.136629] [drm] DisplayPort
[ 7.136630] [drm] HPD4
[ 7.136632] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 7.136633] [drm] Encoders:
[ 7.136635] [drm] DFP1: INTERNAL_UNIPHY2
[ 7.136636] [drm] Connector 1:
[ 7.136637] [drm] HDMI-A
[ 7.136638] [drm] HPD5
[ 7.136640] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 7.136642] [drm] Encoders:
[ 7.136643] [drm] DFP2: INTERNAL_UNIPHY2
[ 7.136645] [drm] Connector 2:
[ 7.136646] [drm] DVI-I
[ 7.136647] [drm] HPD1
[ 7.136649] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 7.136650] [drm] Encoders:
[ 7.136652] [drm] DFP3: INTERNAL_UNIPHY1
[ 7.136653] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.136655] [drm] Connector 3:
[ 7.136656] [drm] DVI-I
[ 7.136657] [drm] HPD6
[ 7.136659] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 7.136661] [drm] Encoders:
[ 7.136662] [drm] DFP4: INTERNAL_UNIPHY
[ 7.136664] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.303867] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.303915] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 7.303937] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.486184] [drm] fb mappable at 0xD0040000
[ 7.486185] [drm] vram apper at 0xD0000000
[ 7.486186] [drm] size 8294400
[ 7.486187] [drm] fb depth is 24
[ 7.486188] [drm] pitch is 7680
[ 7.493774] Console: switching to colour frame buffer device 240x67
[ 7.497766] fb0: radeondrmfb frame buffer device
[ 7.497767] registered panic notifier
[ 7.497770] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
[ 7.683309] hda_codec: AD1989B: BIOS auto-probing.
[ 7.685597] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 7.685640] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
[ 7.685657] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 8.309117] EXT3-fs (md5): using internal journal
[ 8.615971] md: md11 stopped.
[ 8.657875] md: bind<sde1>
[ 8.658048] md: bind<sdd1>
[ 8.658542] raid0: looking at sdd1
[ 8.658544] raid0: comparing sdd1(104871936)
[ 8.658545] with sdd1(104871936)
[ 8.658546] raid0: END
[ 8.658546] raid0: ==> UNIQUE
[ 8.658547] raid0: 1 zones
[ 8.658548] raid0: looking at sde1
[ 8.658549] raid0: comparing sde1(104871936)
[ 8.658550] with sdd1(104871936)
[ 8.658551] raid0: EQUAL
[ 8.658552] raid0: FINAL 1 zones
[ 8.658553] raid0: done.
[ 8.658554] raid0 : md_size is 209743872 sectors.
[ 8.658555] ******* md11 configuration *********
[ 8.658556] zone0=[sdd1/sde1/]
[ 8.658558] zone offset=0kb device offset=0kb size=104871936kb
[ 8.658559] **********************************
[ 8.658559]
[ 8.658563] md11: detected capacity change from 0 to 107388862464
[ 8.659021] md11: unknown partition table
[ 8.664395] md: md6 stopped.
[ 8.665354] md: bind<sdb6>
[ 8.665657] md: bind<sdc6>
[ 8.665845] md: bind<sda6>
[ 8.666379] raid1: raid set md6 active with 3 out of 3 mirrors
[ 8.666391] md6: detected capacity change from 0 to 253354939392
[ 8.666632] md6: unknown partition table
[ 9.180550] kjournald starting. Commit interval 5 seconds
[ 9.180554] EXT3-fs (md11): warning: maximal mount count reached, running e2fsck is recommended
[ 9.180812] EXT3-fs (md11): using internal journal
[ 9.180817] EXT3-fs (md11): mounted filesystem with writeback data mode
[ 9.222457] kjournald starting. Commit interval 5 seconds
[ 9.222460] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 9.238847] EXT3-fs (md6): using internal journal
[ 9.238852] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 9.306719] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 9.308071] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 9.309487] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 15.215185] sky2 0000:06:00.0: eth0: enabling interface
[ 17.133294] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 26.742950] NET: Registered protocol family 10
[ 28.983183] /dev/vmmon[4193]: Module vmmon: registered with major=10 minor=165
[ 28.983191] /dev/vmmon[4193]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 28.983197] /dev/vmmon[4193]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 28.983198] /dev/vmmon[4193]: Module vmmon: initialized
[ 29.089626] /dev/vmci[4212]: VMCI: Driver initialized.
[ 29.089647] /dev/vmci[4212]: Module vmci: registered with major=10 minor=59
[ 29.089649] /dev/vmci[4212]: Module vmci: initialized
[ 29.387878] /dev/vmnet: open called by PID 4294 (vmnet-bridge)
[ 29.387883] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 29.387902] /dev/vmnet: port on hub 0 successfully opened
[ 29.387913] bridge-eth0: up
[ 29.387915] bridge-eth0: attached
[ 30.600891] /dev/vmnet: open called by PID 4301 (vmnet-dhcpd)
[ 30.600896] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 30.600915] /dev/vmnet: port on hub 1 successfully opened
[ 30.649363] /dev/vmnet: open called by PID 4303 (vmnet-netifup)
[ 30.649368] /dev/vmnet: port on hub 1 successfully opened
[ 30.693440] /dev/vmnet: open called by PID 4306 (vmnet-dhcpd)
[ 30.693445] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 30.693465] /dev/vmnet: port on hub 8 successfully opened
[ 30.791250] /dev/vmnet: open called by PID 4310 (vmnet-natd)
[ 30.791256] /dev/vmnet: port on hub 8 successfully opened
[ 30.799896] /dev/vmnet: open called by PID 4311 (vmnet-netifup)
[ 30.799902] /dev/vmnet: port on hub 8 successfully opened
[ 37.466088] eth0: no IPv6 routers present
[ 41.182014] vmnet8: no IPv6 routers present
[ 41.325622] vmnet1: no IPv6 routers present
[-- Attachment #3: dmesg.IDEDriveMissing --]
[-- Type: application/octet-stream, Size: 60234 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #4 SMP PREEMPT Tue Jul 6 10:35:15 PDT 2010
[ 0.000000] Command line: root=/dev/md5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 1G
[ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000
[ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143439
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 12
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] early_res array is doubled to 64 at [14000 - 147ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
[ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
[ 0.000000] Kernel command line: root=/dev/md5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] early_res array is doubled to 128 at [14800 - 157ff]
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (60 early reservations)
[ 0.000000] #1 [0001000000 - 0001771144] TEXT DATA BSS
[ 0.000000] #2 [0001772000 - 0001772298] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved
[ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM
[ 0.000000] #11 [0001771180 - 0001771780] BOOTMEM
[ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM
[ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM
[ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0
[ 0.000000] #15 [0001771780 - 0001771900] BOOTMEM
[ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM
[ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM
[ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM
[ 0.000000] #19 [0001771900 - 0001771941] BOOTMEM
[ 0.000000] #20 [0001771980 - 0001771a06] BOOTMEM
[ 0.000000] #21 [0001771a40 - 0001771ca8] BOOTMEM
[ 0.000000] #22 [0001771cc0 - 0001771d28] BOOTMEM
[ 0.000000] #23 [0001771d40 - 0001771da8] BOOTMEM
[ 0.000000] #24 [0001771dc0 - 0001771e28] BOOTMEM
[ 0.000000] #25 [0001771e40 - 0001771ea8] BOOTMEM
[ 0.000000] #26 [0001771ec0 - 0001771f28] BOOTMEM
[ 0.000000] #27 [0001771f40 - 0001771fa8] BOOTMEM
[ 0.000000] #28 [00017a32c0 - 00017a3328] BOOTMEM
[ 0.000000] #29 [00017a3340 - 00017a33a8] BOOTMEM
[ 0.000000] #30 [00017a33c0 - 00017a3428] BOOTMEM
[ 0.000000] #31 [00017a3440 - 00017a34a8] BOOTMEM
[ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM
[ 0.000000] #33 [00017a34c0 - 00017a34ce] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM
[ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM
[ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM
[ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM
[ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM
[ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM
[ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM
[ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM
[ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM
[ 0.000000] #46 [00017a3500 - 00017a3508] BOOTMEM
[ 0.000000] #47 [00017a3540 - 00017a3548] BOOTMEM
[ 0.000000] #48 [00017a3580 - 00017a35b0] BOOTMEM
[ 0.000000] #49 [00017a35c0 - 00017a3620] BOOTMEM
[ 0.000000] #50 [00017a3640 - 00017a3750] BOOTMEM
[ 0.000000] #51 [00017a3780 - 00017a37c8] BOOTMEM
[ 0.000000] #52 [00017a3800 - 00017a3848] BOOTMEM
[ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM
[ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM
[ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM
[ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM
[ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM
[ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM
[ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 12302060k/13631488k available (3630k kernel code, 1057732k absent, 271696k reserved, 2958k data, 476k init)
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3338.194 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6676.38 BogoMIPS (lpj=3338194)
[ 0.000296] Security Framework initialized
[ 0.000436] Mount-cache hash table entries: 256
[ 0.000642] CPU: Physical Processor ID: 0
[ 0.000767] CPU: Processor Core ID: 0
[ 0.000894] mce: CPU supports 9 MCE banks
[ 0.001030] CPU0: Thermal monitoring enabled (TM1)
[ 0.001163] using mwait in idle threads.
[ 0.001296] Performance Events: Westmere events, Intel PMU driver.
[ 0.001477] ... version: 3
[ 0.001602] ... bit width: 48
[ 0.001727] ... generic registers: 4
[ 0.001852] ... value mask: 0000ffffffffffff
[ 0.001980] ... max period: 000000007fffffff
[ 0.002107] ... fixed-purpose events: 3
[ 0.002239] ... event mask: 000000070000000f
[ 0.002386] Freeing SMP alternatives: 36k freed
[ 0.002517] ACPI: Core revision 20100121
[ 0.041833] Setting APIC routing to physical flat
[ 0.042401] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052507] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
[ 0.159795] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
[ 1.204151] Brought up 12 CPUs
[ 1.204276] Total of 12 processors activated (81697.10 BogoMIPS).
[ 1.210793] NET: Registered protocol family 16
[ 1.213689] ACPI: bus type pci registered
[ 1.213870] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.214100] PCI: not using MMCONFIG
[ 1.214223] PCI: Using configuration type 1 for base access
[ 1.216248] bio: create slab <bio-0> at 0
[ 1.217577] ACPI: EC: Look up EC in DSDT
[ 1.218706] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.299202] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.300038] ACPI: Interpreter enabled
[ 1.300162] ACPI: (supports S0 S5)
[ 1.300340] ACPI: Using IOAPIC for interrupt routing
[ 1.300504] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.302306] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.327180] ACPI: No dock devices found.
[ 1.327305] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.327636] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.327981] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.328110] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.328239] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.328461] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.328684] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.328909] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.329172] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.329175] pci 0000:00:00.0: PME# disabled
[ 1.329217] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.329219] pci 0000:00:01.0: PME# disabled
[ 1.329261] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.329263] pci 0000:00:03.0: PME# disabled
[ 1.329307] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.329309] pci 0000:00:07.0: PME# disabled
[ 1.329477] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
[ 1.329530] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
[ 1.329583] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
[ 1.329635] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 1.329680] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.329683] pci 0000:00:1a.7: PME# disabled
[ 1.329712] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 1.329746] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.329748] pci 0000:00:1b.0: PME# disabled
[ 1.329799] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.329802] pci 0000:00:1c.0: PME# disabled
[ 1.329855] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.329857] pci 0000:00:1c.2: PME# disabled
[ 1.329910] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.329913] pci 0000:00:1c.4: PME# disabled
[ 1.329965] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.329968] pci 0000:00:1c.5: PME# disabled
[ 1.330007] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
[ 1.330060] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
[ 1.330112] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
[ 1.330164] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 1.330210] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.330213] pci 0000:00:1d.7: PME# disabled
[ 1.330308] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 1.330532] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.330663] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.330927] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
[ 1.330931] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
[ 1.330935] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
[ 1.330940] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
[ 1.330944] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
[ 1.330948] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
[ 1.330984] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 1.330994] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.331024] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
[ 1.331028] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
[ 1.331032] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
[ 1.331036] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
[ 1.331040] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
[ 1.331044] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
[ 1.331094] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.331221] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.331223] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.331227] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.331254] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.331381] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.331383] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.331387] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.331427] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.331434] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[ 1.331438] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
[ 1.331444] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[ 1.331459] pci 0000:03:00.0: supports D1 D2
[ 1.331480] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[ 1.331508] pci 0000:03:00.1: supports D1 D2
[ 1.331518] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.331646] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.331649] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.331652] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.331684] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.331814] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.331816] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.331821] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.331886] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.331892] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.331915] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.331950] pci 0000:06:00.0: supports D1 D2
[ 1.331951] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.331955] pci 0000:06:00.0: PME# disabled
[ 1.331964] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.332091] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.332094] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.332098] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332196] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 1.332230] pci 0000:05:00.0: PME# supported from D3hot
[ 1.332234] pci 0000:05:00.0: PME# disabled
[ 1.332274] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.332281] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
[ 1.332289] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
[ 1.332296] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.332303] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.332356] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.332483] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.332486] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.332490] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332557] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 1.332564] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.332586] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 1.332621] pci 0000:04:00.0: supports D1 D2
[ 1.332623] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.332626] pci 0000:04:00.0: PME# disabled
[ 1.332636] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.332765] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.332768] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.332772] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332811] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 1.332816] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
[ 1.332853] pci 0000:08:02.0: supports D2
[ 1.332854] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 1.332857] pci 0000:08:02.0: PME# disabled
[ 1.332893] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.333023] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.333026] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.333030] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.333031] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.333033] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.333034] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.333036] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.333037] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.333039] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.333063] pci_bus 0000:00: on NUMA node 0
[ 1.333066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.333297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.333372] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.333417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.333461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.333513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.333557] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.333600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.333642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.354013] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.354501] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.354787] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.355272] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.355759] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.356243] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.356731] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.357215] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.357797] SCSI subsystem initialized
[ 1.358030] libata version 3.00 loaded.
[ 1.358113] usbcore: registered new interface driver usbfs
[ 1.358258] usbcore: registered new interface driver hub
[ 1.358406] usbcore: registered new device driver usb
[ 1.358647] PCI: Using ACPI for IRQ routing
[ 1.358772] PCI: pci_cache_line_size set to 64 bytes
[ 1.358854] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.358855] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.358925] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.359176] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.361315] Switching to clocksource tsc
[ 1.361819] pnp: PnP ACPI init
[ 1.361944] ACPI: bus type pnp registered
[ 1.364476] pnp: PnP ACPI: found 17 devices
[ 1.364603] ACPI: ACPI bus type pnp unregistered
[ 1.364734] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.364863] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.364991] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.365119] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.365247] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.365375] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.365506] system 00:07: [io 0x0290-0x029f] has been reserved
[ 1.365636] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.365764] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.365891] system 00:08: [io 0x0500-0x057f] could not be reserved
[ 1.366018] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.366147] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.366275] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.366405] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.366535] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.366666] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.366797] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.366926] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.367055] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.367183] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.367311] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.367440] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.372161] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.372290] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.372513] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.372737] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.372960] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.373087] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.373212] pci 0000:00:01.0: bridge window [io disabled]
[ 1.373340] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.373467] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.373597] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.373723] pci 0000:00:03.0: bridge window [io disabled]
[ 1.373851] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.373978] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.374107] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.374233] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.374362] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.374491] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.374717] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.374843] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.374972] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.375102] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.375327] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.375453] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.375583] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.375713] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.375938] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.376064] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.376193] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.376322] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.376549] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.376675] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.376804] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.376934] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.377159] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.377284] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.377413] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.377544] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.377679] pci 0000:00:01.0: setting latency timer to 64
[ 1.377684] pci 0000:00:03.0: setting latency timer to 64
[ 1.377690] pci 0000:00:07.0: setting latency timer to 64
[ 1.377695] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.377825] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.377954] pci 0000:00:1c.0: setting latency timer to 64
[ 1.377961] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.378090] pci 0000:00:1c.2: setting latency timer to 64
[ 1.378095] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.378224] pci 0000:00:1c.4: setting latency timer to 64
[ 1.378231] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.378360] pci 0000:00:1c.5: setting latency timer to 64
[ 1.378364] pci 0000:00:1e.0: setting latency timer to 64
[ 1.378366] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.378368] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.378369] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.378370] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.378371] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.378373] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.378374] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 1.378375] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.378377] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.378378] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.378379] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.378381] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.378382] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.378383] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.378384] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.378386] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.378387] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.378388] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.378390] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.378391] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.378392] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.378393] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 1.378395] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.378396] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.378397] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.378398] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.378400] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.378401] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.378402] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.378442] NET: Registered protocol family 2
[ 1.378618] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.379291] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.379973] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.380205] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.380333] TCP reno registered
[ 1.380456] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.380620] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.380864] NET: Registered protocol family 1
[ 1.381153] RPC: Registered udp transport module.
[ 1.381278] RPC: Registered tcp transport module.
[ 1.381402] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.381672] pci 0000:03:00.0: Boot video device
[ 1.381686] PCI: CLS 256 bytes, default 64
[ 1.381711] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.381839] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
[ 1.382061] software IO TLB at phys 0xe000000 - 0x12000000
[ 1.384260] VFS: Disk quotas dquot_6.5.2
[ 1.384403] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.384793] NTFS driver 2.1.29 [Flags: R/W].
[ 1.384955] fuse init (API version 7.13)
[ 1.385128] msgmni has been set to 24027
[ 1.385470] alg: No test for stdrng (krng)
[ 1.385626] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.385850] io scheduler noop registered
[ 1.385973] io scheduler deadline registered
[ 1.386111] io scheduler cfq registered (default)
[ 1.386299] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.386323] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.386387] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.386409] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.386470] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.386492] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.386622] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.386650] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.386733] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.386761] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.386841] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.386869] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.386948] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.386976] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.387073] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.387078] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.387081] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.388489] Non-volatile memory driver v1.3
[ 1.388716] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.388941] ACPI: Power Button [PWRB]
[ 1.389098] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.389320] ACPI: Power Button [PWRF]
[ 1.389952] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.391225] brd: module loaded
[ 1.391779] loop: module loaded
[ 1.392014] ahci 0000:05:00.0: version 3.0
[ 1.392027] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.402484] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.402718] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.402849] ahci 0000:05:00.0: setting latency timer to 64
[ 1.402931] scsi0 : ahci
[ 1.403130] scsi1 : ahci
[ 1.405966] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.406189] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.406452] ata_piix 0000:00:1f.2: version 2.13
[ 1.406461] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.406592] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.406863] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.406894] scsi2 : ata_piix
[ 1.407076] scsi3 : ata_piix
[ 1.408459] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[ 1.408591] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[ 1.408734] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.408866] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.409133] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.409154] scsi4 : ata_piix
[ 1.409335] scsi5 : ata_piix
[ 1.410527] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[ 1.410660] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[ 1.410871] console [netcon0] enabled
[ 1.410995] netconsole: network logging started
[ 1.411177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.411315] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.411451] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.411453] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.411619] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.411860] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.415863] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.415871] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.425401] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.425547] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.425677] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.425898] usb usb1: Product: EHCI Host Controller
[ 1.426023] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.426150] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.426347] hub 1-0:1.0: USB hub found
[ 1.426472] hub 1-0:1.0: 6 ports detected
[ 1.426637] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.426772] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.426774] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.426932] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.427169] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.431171] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.431180] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.440364] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.440506] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.440636] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.440857] usb usb2: Product: EHCI Host Controller
[ 1.440982] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.441109] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.441302] hub 2-0:1.0: USB hub found
[ 1.441426] hub 2-0:1.0: 6 ports detected
[ 1.441603] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.441752] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.441896] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.442027] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.442029] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.442190] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.442430] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.442578] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.442706] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.442927] usb usb3: Product: UHCI Host Controller
[ 1.443051] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.443179] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.443372] hub 3-0:1.0: USB hub found
[ 1.443497] hub 3-0:1.0: 2 ports detected
[ 1.443652] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.443783] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.443785] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.443943] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.444187] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.444332] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.444460] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.444684] usb usb4: Product: UHCI Host Controller
[ 1.444809] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.444936] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.445125] hub 4-0:1.0: USB hub found
[ 1.445250] hub 4-0:1.0: 2 ports detected
[ 1.445402] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.445533] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.445535] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.445695] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.445941] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.446086] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.446214] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.446435] usb usb5: Product: UHCI Host Controller
[ 1.446562] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.446689] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.446880] hub 5-0:1.0: USB hub found
[ 1.447005] hub 5-0:1.0: 2 ports detected
[ 1.447157] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.447288] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.447290] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.447448] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.447690] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.447835] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.447962] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.448183] usb usb6: Product: UHCI Host Controller
[ 1.448308] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.448436] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.448628] hub 6-0:1.0: USB hub found
[ 1.448753] hub 6-0:1.0: 2 ports detected
[ 1.448904] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.449036] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.449038] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.449196] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.449437] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.449584] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.449712] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.449933] usb usb7: Product: UHCI Host Controller
[ 1.450058] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.450185] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.450376] hub 7-0:1.0: USB hub found
[ 1.450501] hub 7-0:1.0: 2 ports detected
[ 1.450654] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.450785] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.450787] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.450946] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.451186] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.451331] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.451459] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.451682] usb usb8: Product: UHCI Host Controller
[ 1.451807] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.451934] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.452124] hub 8-0:1.0: USB hub found
[ 1.452249] hub 8-0:1.0: 2 ports detected
[ 1.452417] Initializing USB Mass Storage driver...
[ 1.452584] usbcore: registered new interface driver usb-storage
[ 1.452711] USB Mass Storage support registered.
[ 1.452872] usbcore: registered new interface driver libusual
[ 1.453050] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.454889] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.455018] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.455193] mice: PS/2 mouse device common for all mice
[ 1.455427] i2c /dev entries driver
[ 1.455590] md: raid0 personality registered for level 0
[ 1.455717] md: raid1 personality registered for level 1
[ 1.455932] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.456157] cpuidle: using governor ladder
[ 1.456281] cpuidle: using governor menu
[ 1.456525] usbcore: registered new interface driver hiddev
[ 1.456677] usbcore: registered new interface driver usbhid
[ 1.456803] usbhid: USB HID core driver
[ 1.457085] TCP cubic registered
[ 1.457208] NET: Registered protocol family 17
[ 1.457732] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.472972] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.710726] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.710729] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.044877] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.206546] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.206683] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.206812] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
[ 2.206940] usb 3-2: Manufacturer: American Power Conversion
[ 2.207067] usb 3-2: SerialNumber: 3B1007X44377
[ 2.210522] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.210668] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.216983] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.217120] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.217433] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.217585] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.223759] ata4.00: configured for UDMA/133
[ 2.230302] ata4.01: configured for UDMA/133
[ 2.233461] ata3.00: SATA link down (SStatus 0 SControl 301)
[ 2.233603] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.247860] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.247996] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.251686] ata3.01: configured for UDMA/133
[ 2.251872] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.252203] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.252221] sd 2:0:1:0: Attached scsi generic sg0 type 0
[ 2.252592] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.253407] sd 2:0:1:0: [sda] Write Protect is off
[ 2.253408] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.253426] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.253524] sda:
[ 2.255942] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.255976] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.256036] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.256132] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.256157] sd 3:0:1:0: [sdc] Write Protect is off
[ 2.256158] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.256159] sd 3:0:1:0: Attached scsi generic sg2 type 0
[ 2.256169] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.256233] sdc: sda1 sda2 sda3 sda4 < sdc1 sdc2
[ 2.267155] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.267158] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.267180] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.267655] sdc3 sdc4 < sdc5 sda5 sdc6 >
[ 2.290413] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
[ 2.293579] sda6 >
[ 2.305064] sdb:
[ 2.306533] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.313062] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 2.313190] sdb1 sdb2 sdb3 sdb4 < sdb5
[ 2.328956] ata5: SATA link down (SStatus 0 SControl 301)
[ 2.337495] sdb6 >
[ 2.354922] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.481838] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.485070] ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.485207] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.491826] ata6.00: configured for UDMA/133
[ 2.491998] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.492314] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.492354] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 2.492686] sd 5:0:0:0: [sdd] Write Protect is off
[ 2.492815] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.492826] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.493113] sdd:
[ 2.495773] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.503117] sdd1
[ 2.503410] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 2.665098] usb 8-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.665235] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.665367] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.665496] usb 8-2: Manufacturer: Microsoft
[ 2.683191] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.683504] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 4.574284] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.581943] md: Waiting for all devices to be available before autodetect
[ 4.582079] md: If you don't use raid, use raid=noautodetect
[ 4.582288] md: Autodetecting RAID arrays.
[ 4.643656] md: Scanned 6 and added 6 devices.
[ 4.643788] md: autorun ...
[ 4.643910] md: considering sdb5 ...
[ 4.644035] md: adding sdb5 ...
[ 4.644159] md: sdb3 has different UUID to sdb5
[ 4.644285] md: adding sda5 ...
[ 4.644408] md: sda3 has different UUID to sdb5
[ 4.644538] md: adding sdc5 ...
[ 4.644662] md: sdc3 has different UUID to sdb5
[ 4.644868] md: created md5
[ 4.644991] md: bind<sdc5>
[ 4.645117] md: bind<sda5>
[ 4.645243] md: bind<sdb5>
[ 4.645368] md: running: <sdb5><sda5><sdc5>
[ 4.645660] raid1: raid set md5 active with 3 out of 3 mirrors
[ 4.645802] md5: detected capacity change from 0 to 53694496768
[ 4.645950] md: considering sdb3 ...
[ 4.646075] md: adding sdb3 ...
[ 4.646199] md: adding sda3 ...
[ 4.646323] md: adding sdc3 ...
[ 4.646527] md: created md3
[ 4.646650] md: bind<sdc3>
[ 4.646776] md: bind<sda3>
[ 4.646901] md: bind<sdb3>
[ 4.647026] md: running: <sdb3><sda3><sdc3>
[ 4.647315] raid1: raid set md3 active with 3 out of 3 mirrors
[ 4.647452] md3: detected capacity change from 0 to 53694562304
[ 4.647602] md: ... autorun DONE.
[ 4.647758] md5: unknown partition table
[ 4.691815] kjournald starting. Commit interval 5 seconds
[ 4.691821] EXT3-fs (md5): mounted filesystem with writeback data mode
[ 4.691832] VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
[ 4.692209] Freeing unused kernel memory: 476k freed
[ 4.692393] Write protecting the kernel read-only data: 6144k
[ 4.692601] Freeing unused kernel memory: 448k freed
[ 4.692797] Freeing unused kernel memory: 248k freed
[ 6.486789] udev: starting version 149
[ 6.580054] rtc_cmos 00:03: RTC can wake from S4
[ 6.580121] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.580146] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.611062] md3:
[ 6.731884] sky2: driver version 1.27
[ 6.731907] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.731916] sky2 0000:06:00.0: setting latency timer to 64
[ 6.731943] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.732024] sky2 0000:06:00.0: irq 55 for MSI/MSI-X
[ 6.732193] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
[ 6.732205] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.732211] sky2 0000:04:00.0: setting latency timer to 64
[ 6.732231] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.732311] sky2 0000:04:00.0: irq 56 for MSI/MSI-X
[ 6.732473] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
[ 6.744861] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.744865] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f disabled]
[ 6.744867] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.752115] unknown partition table
[ 6.842496] Linux agpgart interface v0.103
[ 6.865663] [drm] Initialized drm 1.1.0 20060810
[ 6.945232] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.945290] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 6.945314] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.956533] [drm] radeon defaulting to kernel modesetting.
[ 6.956534] [drm] radeon kernel modesetting enabled.
[ 6.956565] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 6.956568] radeon 0000:03:00.0: setting latency timer to 64
[ 6.957286] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[ 6.957428] [drm] register mmio base: 0xFBAC0000
[ 6.957429] [drm] register mmio size: 131072
[ 6.957495] ATOM BIOS: JUNIPER
[ 6.957504] [drm] Clocks initialized !
[ 6.957505] [drm] 1 Power State(s)
[ 6.957506] [drm] State 0 Default (default)
[ 6.957507] [drm] 16 PCIE Lanes
[ 6.957508] [drm] 1 Clock Mode(s)
[ 6.957509] [drm] 0 engine/memory: 850000/1200000
[ 6.957514] [drm] radeon: power management initialized
[ 6.957519] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 6.957521] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 6.957531] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 6.957532] [drm] Detected VRAM RAM=256M, BAR=256M
[ 6.957533] [drm] RAM width 128bits DDR
[ 6.957553] [TTM] Zone kernel: Available graphics memory: 6151634 kiB.
[ 6.957554] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 6.957561] [drm] radeon: 256M of VRAM memory ready
[ 6.957562] [drm] radeon: 512M of GTT memory ready.
[ 6.958913] [drm] Radeon Display Connectors
[ 6.958915] [drm] Connector 0:
[ 6.958916] [drm] DisplayPort
[ 6.958918] [drm] HPD4
[ 6.958920] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 6.958921] [drm] Encoders:
[ 6.958923] [drm] DFP1: INTERNAL_UNIPHY2
[ 6.958924] [drm] Connector 1:
[ 6.958926] [drm] HDMI-A
[ 6.958927] [drm] HPD5
[ 6.958929] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 6.958931] [drm] Encoders:
[ 6.958932] [drm] DFP2: INTERNAL_UNIPHY2
[ 6.958934] [drm] Connector 2:
[ 6.958935] [drm] DVI-I
[ 6.958936] [drm] HPD1
[ 6.958938] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 6.958940] [drm] Encoders:
[ 6.958941] [drm] DFP3: INTERNAL_UNIPHY1
[ 6.958942] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 6.958944] [drm] Connector 3:
[ 6.958945] [drm] DVI-I
[ 6.958951] [drm] HPD6
[ 6.958953] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 6.958954] [drm] Encoders:
[ 6.958955] [drm] DFP4: INTERNAL_UNIPHY
[ 6.958957] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.307599] [drm] fb mappable at 0xD0040000
[ 7.307601] [drm] vram apper at 0xD0000000
[ 7.307602] [drm] size 8294400
[ 7.307602] [drm] fb depth is 24
[ 7.307603] [drm] pitch is 7680
[ 7.316065] Console: switching to colour frame buffer device 240x67
[ 7.320027] fb0: radeondrmfb frame buffer device
[ 7.320028] registered panic notifier
[ 7.320031] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
[ 7.321128] hda_codec: AD1989B: BIOS auto-probing.
[ 7.323402] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 7.323444] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
[ 7.323462] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 8.086540] EXT3-fs (md5): using internal journal
[ 8.362076] md: md11 stopped.
[ 8.385474] md: bind<sdd1>
[ 8.387906] md: md6 stopped.
[ 8.393334] md: bind<sdb6>
[ 8.393719] md: bind<sdc6>
[ 8.403198] md: bind<sda6>
[ 8.403778] raid1: raid set md6 active with 3 out of 3 mirrors
[ 8.403791] md6: detected capacity change from 0 to 253354939392
[ 8.404161] md6: unknown partition table
[ 8.947063] EXT3-fs (md11): error: unable to read superblock
[ 8.975182] kjournald starting. Commit interval 5 seconds
[ 8.975187] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 8.995355] EXT3-fs (md6): using internal journal
[ 8.995361] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 9.048862] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 9.050276] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 9.051611] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 14.327600] sky2 0000:06:00.0: eth0: enabling interface
[ 16.224803] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 20.878956] NET: Registered protocol family 10
[ 23.072866] /dev/vmmon[4159]: Module vmmon: registered with major=10 minor=165
[ 23.072874] /dev/vmmon[4159]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 23.072879] /dev/vmmon[4159]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 23.072881] /dev/vmmon[4159]: Module vmmon: initialized
[ 23.144869] /dev/vmci[4178]: VMCI: Driver initialized.
[ 23.144884] /dev/vmci[4178]: Module vmci: registered with major=10 minor=59
[ 23.144886] /dev/vmci[4178]: Module vmci: initialized
[ 23.421937] /dev/vmnet: open called by PID 4260 (vmnet-bridge)
[ 23.421944] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 23.421963] /dev/vmnet: port on hub 0 successfully opened
[ 23.421973] bridge-eth0: up
[ 23.421975] bridge-eth0: attached
[ 24.627203] /dev/vmnet: open called by PID 4267 (vmnet-dhcpd)
[ 24.627207] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 24.627219] /dev/vmnet: port on hub 1 successfully opened
[ 24.675538] /dev/vmnet: open called by PID 4269 (vmnet-netifup)
[ 24.675543] /dev/vmnet: port on hub 1 successfully opened
[ 24.715811] /dev/vmnet: open called by PID 4272 (vmnet-dhcpd)
[ 24.715815] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 24.715827] /dev/vmnet: port on hub 8 successfully opened
[ 24.807422] /dev/vmnet: open called by PID 4276 (vmnet-natd)
[ 24.807427] /dev/vmnet: port on hub 8 successfully opened
[ 24.814063] /dev/vmnet: open called by PID 4277 (vmnet-netifup)
[ 24.814069] /dev/vmnet: port on hub 8 successfully opened
[ 30.962545] eth0: no IPv6 routers present
[ 35.045016] vmnet8: no IPv6 routers present
[ 35.591626] vmnet1: no IPv6 routers present
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-06 18:13 ` Mark Knecht
@ 2010-07-07 5:50 ` Tejun Heo
2010-07-07 15:34 ` Mark Knecht
0 siblings, 1 reply; 55+ messages in thread
From: Tejun Heo @ 2010-07-07 5:50 UTC (permalink / raw)
To: Mark Knecht; +Cc: Linux Kernel List, linux-ide
Hello,
On 07/06/2010 08:13 PM, Mark Knecht wrote:
> OK - thanks. The patch seemed to install correctly. I then did
>
> make clean
> make && make modules_install
>
> and then a Gentoo command:
>
> modules-rebuild -X rebuild
>
> to pick up any package modules that need to be rebuild when I use a
> new kernel. (X drivers, vmware, etc.)
>
> The kernel boots fine:
>
> mark@c2stable ~ $ uname -a
> Linux c2stable 2.6.34-gentoo-r1 #4 SMP PREEMPT Tue Jul 6 10:35:15 PDT
> 2010 x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel
> GNU/Linux
> mark@c2stable ~ $
>
> I don't know what I'm looking for in the dmesg files but I do see one
> message about a SATA Link being down.
Umm... the patched module isn't being loaded. If patched, it should
be reporting whether it's hard or soft resetting and some other debug
messages. One common mistake is not updating initrd with patched
modules. Is "modules-rebuild -X rebuild" the command for initrd
update?
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-07 5:50 ` Tejun Heo
@ 2010-07-07 15:34 ` Mark Knecht
2010-07-07 15:48 ` Tejun Heo
0 siblings, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-07 15:34 UTC (permalink / raw)
To: Tejun Heo; +Cc: Linux Kernel List, linux-ide
[-- Attachment #1: Type: text/plain, Size: 2781 bytes --]
On Tue, Jul 6, 2010 at 10:50 PM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On 07/06/2010 08:13 PM, Mark Knecht wrote:
>> OK - thanks. The patch seemed to install correctly. I then did
>>
>> make clean
>> make && make modules_install
>>
>> and then a Gentoo command:
>>
>> modules-rebuild -X rebuild
>>
>> to pick up any package modules that need to be rebuild when I use a
>> new kernel. (X drivers, vmware, etc.)
>>
>> The kernel boots fine:
>>
>> mark@c2stable ~ $ uname -a
>> Linux c2stable 2.6.34-gentoo-r1 #4 SMP PREEMPT Tue Jul 6 10:35:15 PDT
>> 2010 x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel
>> GNU/Linux
>> mark@c2stable ~ $
>>
>> I don't know what I'm looking for in the dmesg files but I do see one
>> message about a SATA Link being down.
>
> Umm... the patched module isn't being loaded. If patched, it should
> be reporting whether it's hard or soft resetting and some other debug
> messages. One common mistake is not updating initrd with patched
> modules. Is "modules-rebuild -X rebuild" the command for initrd
> update?
>
> Thanks.
>
> --
> tejun
>
I don't use an initrd.
I don't know what happened with the patch but clearly it wasn't in
there. I wasn't confident so I used the --dry-run option. Maybe I
forgot to remove it or something. Sorry. It's in now.
OK - I don't know if this was you intention but since adding this
patch I've not had a single drive missing failure. I've cold booted
about 8 times and warm booted at least 20 times. Every one has come up
fine. I've even gone so far as to turn off the UPS and sit for 5
minutes before cold booting. Still nothing fails right now.
I've had this sort of statistical thing happen before where it hasn't
failed for days, maybe even weeks, but then it starts failing and
fails every time for awhile. Over the past few days working with you
I've never had to reboot more than twice to get you a file. Now I've
tried 30 times this morning and I've come up with nothing.
I will continue to watch the machine and send you the failing dmesg
file whenever I finally get it. For now I can only attach the passing
file showing the patch is now included.
modules-rebuild is just a little Gentoo script that rebuilds a list of
modules that I've previously set up. Each time I build a new kernel I
rebuild some modules as well as mesa:
xorg-drivers
xorg-input-evdev
xorg-input-keyboard
xorg-input-mouse
xf86-video-ati
xf86-video-fbdev
xf86-video-vmware
vmware-modules
mesa
Clearly I shouldn't need both evdev as well as keyboard/mouse but
there's been problems with hald so I've been flipping back and forth a
bit. mesa is just superstition but I _think_ it's helped a couple of
times.
Thanks!
- Mark
[-- Attachment #2: dmesg.IDE_AllDrives --]
[-- Type: application/octet-stream, Size: 63559 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #5 SMP PREEMPT Wed Jul 7 06:54:21 PDT 2010
[ 0.000000] Command line: root=/dev/md5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 1G
[ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000
[ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143439
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 12
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] early_res array is doubled to 64 at [14000 - 147ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
[ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
[ 0.000000] Kernel command line: root=/dev/md5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] early_res array is doubled to 128 at [14800 - 157ff]
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (60 early reservations)
[ 0.000000] #1 [0001000000 - 0001771144] TEXT DATA BSS
[ 0.000000] #2 [0001772000 - 0001772298] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved
[ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM
[ 0.000000] #11 [0001771180 - 0001771780] BOOTMEM
[ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM
[ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM
[ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0
[ 0.000000] #15 [0001771780 - 0001771900] BOOTMEM
[ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM
[ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM
[ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM
[ 0.000000] #19 [0001771900 - 0001771941] BOOTMEM
[ 0.000000] #20 [0001771980 - 0001771a06] BOOTMEM
[ 0.000000] #21 [0001771a40 - 0001771ca8] BOOTMEM
[ 0.000000] #22 [0001771cc0 - 0001771d28] BOOTMEM
[ 0.000000] #23 [0001771d40 - 0001771da8] BOOTMEM
[ 0.000000] #24 [0001771dc0 - 0001771e28] BOOTMEM
[ 0.000000] #25 [0001771e40 - 0001771ea8] BOOTMEM
[ 0.000000] #26 [0001771ec0 - 0001771f28] BOOTMEM
[ 0.000000] #27 [0001771f40 - 0001771fa8] BOOTMEM
[ 0.000000] #28 [00017a32c0 - 00017a3328] BOOTMEM
[ 0.000000] #29 [00017a3340 - 00017a33a8] BOOTMEM
[ 0.000000] #30 [00017a33c0 - 00017a3428] BOOTMEM
[ 0.000000] #31 [00017a3440 - 00017a34a8] BOOTMEM
[ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM
[ 0.000000] #33 [00017a34c0 - 00017a34ce] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM
[ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM
[ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM
[ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM
[ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM
[ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM
[ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM
[ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM
[ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM
[ 0.000000] #46 [00017a3500 - 00017a3508] BOOTMEM
[ 0.000000] #47 [00017a3540 - 00017a3548] BOOTMEM
[ 0.000000] #48 [00017a3580 - 00017a35b0] BOOTMEM
[ 0.000000] #49 [00017a35c0 - 00017a3620] BOOTMEM
[ 0.000000] #50 [00017a3640 - 00017a3750] BOOTMEM
[ 0.000000] #51 [00017a3780 - 00017a37c8] BOOTMEM
[ 0.000000] #52 [00017a3800 - 00017a3848] BOOTMEM
[ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM
[ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM
[ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM
[ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM
[ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM
[ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM
[ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 12302060k/13631488k available (3630k kernel code, 1057732k absent, 271696k reserved, 2958k data, 476k init)
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3338.144 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6676.28 BogoMIPS (lpj=3338144)
[ 0.000292] Security Framework initialized
[ 0.000430] Mount-cache hash table entries: 256
[ 0.000636] CPU: Physical Processor ID: 0
[ 0.000760] CPU: Processor Core ID: 0
[ 0.000886] mce: CPU supports 9 MCE banks
[ 0.001020] CPU0: Thermal monitoring enabled (TM1)
[ 0.001152] using mwait in idle threads.
[ 0.001283] Performance Events: Westmere events, Intel PMU driver.
[ 0.001462] ... version: 3
[ 0.001585] ... bit width: 48
[ 0.001708] ... generic registers: 4
[ 0.001832] ... value mask: 0000ffffffffffff
[ 0.001958] ... max period: 000000007fffffff
[ 0.002083] ... fixed-purpose events: 3
[ 0.002213] ... event mask: 000000070000000f
[ 0.002359] Freeing SMP alternatives: 36k freed
[ 0.002488] ACPI: Core revision 20100121
[ 0.046641] Setting APIC routing to physical flat
[ 0.047199] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057306] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
[ 0.164785] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
[ 1.212980] Brought up 12 CPUs
[ 1.213103] Total of 12 processors activated (81162.98 BogoMIPS).
[ 1.219620] NET: Registered protocol family 16
[ 1.222508] ACPI: bus type pci registered
[ 1.222688] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.222914] PCI: not using MMCONFIG
[ 1.223037] PCI: Using configuration type 1 for base access
[ 1.225071] bio: create slab <bio-0> at 0
[ 1.226390] ACPI: EC: Look up EC in DSDT
[ 1.227517] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.311207] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.312031] ACPI: Interpreter enabled
[ 1.312153] ACPI: (supports S0 S5)
[ 1.312328] ACPI: Using IOAPIC for interrupt routing
[ 1.312492] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.314294] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.339180] ACPI: No dock devices found.
[ 1.339304] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.339631] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.339976] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.340104] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.340231] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.340451] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.340673] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.340892] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.341154] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.341157] pci 0000:00:00.0: PME# disabled
[ 1.341199] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.341201] pci 0000:00:01.0: PME# disabled
[ 1.341243] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.341245] pci 0000:00:03.0: PME# disabled
[ 1.341289] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.341291] pci 0000:00:07.0: PME# disabled
[ 1.341459] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
[ 1.341512] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
[ 1.341565] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
[ 1.341617] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 1.341664] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.341667] pci 0000:00:1a.7: PME# disabled
[ 1.341694] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 1.341728] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.341730] pci 0000:00:1b.0: PME# disabled
[ 1.341781] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.341783] pci 0000:00:1c.0: PME# disabled
[ 1.341836] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.341839] pci 0000:00:1c.2: PME# disabled
[ 1.341892] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.341894] pci 0000:00:1c.4: PME# disabled
[ 1.341946] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.341949] pci 0000:00:1c.5: PME# disabled
[ 1.341988] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
[ 1.342041] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
[ 1.342093] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
[ 1.342145] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 1.342190] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.342193] pci 0000:00:1d.7: PME# disabled
[ 1.342288] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 1.342510] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.342641] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.342901] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
[ 1.342905] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
[ 1.342909] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
[ 1.342913] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
[ 1.342917] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
[ 1.342921] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
[ 1.342957] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 1.342967] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.342997] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
[ 1.343001] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
[ 1.343005] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
[ 1.343009] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
[ 1.343013] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
[ 1.343017] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
[ 1.343067] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.343193] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.343195] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.343199] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.343225] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.343351] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.343353] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.343357] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.343397] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.343404] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[ 1.343408] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
[ 1.343414] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[ 1.343428] pci 0000:03:00.0: supports D1 D2
[ 1.343450] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[ 1.343477] pci 0000:03:00.1: supports D1 D2
[ 1.343487] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.343614] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.343616] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.343620] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.343654] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.343780] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.343783] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.343787] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.343852] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.343858] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.343881] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.343916] pci 0000:06:00.0: supports D1 D2
[ 1.343917] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.343921] pci 0000:06:00.0: PME# disabled
[ 1.343930] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.344056] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.344059] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.344063] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.344160] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 1.344194] pci 0000:05:00.0: PME# supported from D3hot
[ 1.344198] pci 0000:05:00.0: PME# disabled
[ 1.344238] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.344245] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
[ 1.344253] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
[ 1.344260] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.344267] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.344320] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.344446] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.344448] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.344453] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.344517] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 1.344525] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.344547] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 1.344582] pci 0000:04:00.0: supports D1 D2
[ 1.344583] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.344587] pci 0000:04:00.0: PME# disabled
[ 1.344596] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.344724] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.344727] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.344731] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.344770] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 1.344775] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
[ 1.344812] pci 0000:08:02.0: supports D2
[ 1.344813] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 1.344816] pci 0000:08:02.0: PME# disabled
[ 1.344851] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.344980] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.344983] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.344987] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.344989] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.344990] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.344991] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.344993] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.344994] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.344996] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.345020] pci_bus 0000:00: on NUMA node 0
[ 1.345023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.345253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.345328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.345373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.345417] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.345469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.345512] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.345556] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.345599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.366004] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.366488] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.366774] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.367254] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.367738] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.368218] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.368701] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.369181] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.369758] SCSI subsystem initialized
[ 1.369988] libata version 3.00 loaded.
[ 1.370072] usbcore: registered new interface driver usbfs
[ 1.370216] usbcore: registered new interface driver hub
[ 1.370363] usbcore: registered new device driver usb
[ 1.370599] PCI: Using ACPI for IRQ routing
[ 1.370723] PCI: pci_cache_line_size set to 64 bytes
[ 1.370805] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.370806] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.370876] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.371123] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.373261] Switching to clocksource tsc
[ 1.373760] pnp: PnP ACPI init
[ 1.373884] ACPI: bus type pnp registered
[ 1.376413] pnp: PnP ACPI: found 17 devices
[ 1.376536] ACPI: ACPI bus type pnp unregistered
[ 1.376667] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.376794] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.376920] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.377046] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.377173] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.377300] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.377429] system 00:07: [io 0x0290-0x029f] has been reserved
[ 1.377560] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.377686] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.377811] system 00:08: [io 0x0500-0x057f] could not be reserved
[ 1.377937] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.378064] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.378190] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.378318] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.378447] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.378576] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.378705] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.378832] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.378959] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.379086] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.379212] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.379339] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.384057] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.384185] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.384404] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.384626] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.384846] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.384971] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.385095] pci 0000:00:01.0: bridge window [io disabled]
[ 1.385221] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.385347] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.385474] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.385600] pci 0000:00:03.0: bridge window [io disabled]
[ 1.385726] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.385852] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.385979] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.386104] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.386231] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.386358] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.386582] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.386707] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.386834] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.386962] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.387184] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.387308] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.387436] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.387566] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.387788] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.387912] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.388040] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.388168] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.388390] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.388516] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.388644] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.388771] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.388993] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.389118] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.389245] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.389373] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.389509] pci 0000:00:01.0: setting latency timer to 64
[ 1.389514] pci 0000:00:03.0: setting latency timer to 64
[ 1.389519] pci 0000:00:07.0: setting latency timer to 64
[ 1.389525] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.389653] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.389780] pci 0000:00:1c.0: setting latency timer to 64
[ 1.389787] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.389915] pci 0000:00:1c.2: setting latency timer to 64
[ 1.389920] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.390048] pci 0000:00:1c.4: setting latency timer to 64
[ 1.390054] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.390182] pci 0000:00:1c.5: setting latency timer to 64
[ 1.390186] pci 0000:00:1e.0: setting latency timer to 64
[ 1.390188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.390190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.390191] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.390192] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.390194] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.390195] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.390196] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 1.390197] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.390199] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.390200] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.390201] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.390203] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.390204] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.390205] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.390207] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.390208] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.390209] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.390210] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.390212] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.390213] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.390214] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.390216] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 1.390217] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.390218] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.390219] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.390221] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.390222] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.390223] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.390224] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.390264] NET: Registered protocol family 2
[ 1.390437] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.391109] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.391786] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.392015] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.392142] TCP reno registered
[ 1.392264] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.392424] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.392668] NET: Registered protocol family 1
[ 1.392935] RPC: Registered udp transport module.
[ 1.393058] RPC: Registered tcp transport module.
[ 1.393181] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.393443] pci 0000:03:00.0: Boot video device
[ 1.393456] PCI: CLS 256 bytes, default 64
[ 1.393482] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.393612] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
[ 1.393831] software IO TLB at phys 0xe000000 - 0x12000000
[ 1.396024] VFS: Disk quotas dquot_6.5.2
[ 1.396165] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.396557] NTFS driver 2.1.29 [Flags: R/W].
[ 1.396722] fuse init (API version 7.13)
[ 1.396895] msgmni has been set to 24027
[ 1.397215] alg: No test for stdrng (krng)
[ 1.397377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.397596] io scheduler noop registered
[ 1.397720] io scheduler deadline registered
[ 1.397858] io scheduler cfq registered (default)
[ 1.398045] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.398069] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.398131] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.398154] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.398213] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.398235] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.398295] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.398322] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.398405] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.398432] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.398513] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.398541] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.398621] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.398651] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.398749] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.398754] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.398757] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.400239] Non-volatile memory driver v1.3
[ 1.400456] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.400681] ACPI: Power Button [PWRB]
[ 1.400837] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.401057] ACPI: Power Button [PWRF]
[ 1.401697] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.402970] brd: module loaded
[ 1.403519] loop: module loaded
[ 1.403758] ahci 0000:05:00.0: version 3.0
[ 1.403771] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.415631] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.415860] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.415991] ahci 0000:05:00.0: setting latency timer to 64
[ 1.416071] scsi0 : ahci
[ 1.416268] scsi1 : ahci
[ 1.419074] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.419294] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.419531] ata1: hard resetting link
[ 1.419540] ata2: hard resetting link
[ 1.419553] ata_piix 0000:00:1f.2: version 2.13
[ 1.419562] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.419564] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.419586] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.419620] scsi2 : ata_piix
[ 1.419679] scsi3 : ata_piix
[ 1.420938] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[ 1.421069] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[ 1.421210] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.421224] ata3.00: hard resetting link
[ 1.421237] ata4.00: hard resetting link
[ 1.421585] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.421851] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.421872] scsi4 : ata_piix
[ 1.422049] scsi5 : ata_piix
[ 1.423236] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[ 1.423364] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[ 1.423516] ata5: hard resetting link
[ 1.423530] ata6: hard resetting link
[ 1.423762] console [netcon0] enabled
[ 1.423885] netconsole: network logging started
[ 1.424065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.424202] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.424336] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.424339] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.424500] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.424739] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.428739] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.428748] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.438342] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.438487] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.438616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.438835] usb usb1: Product: EHCI Host Controller
[ 1.438958] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.439084] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.439277] hub 1-0:1.0: USB hub found
[ 1.439401] hub 1-0:1.0: 6 ports detected
[ 1.439564] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.439698] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.439700] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.439856] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.440090] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.444078] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.444087] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.453306] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.453446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.453575] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.453794] usb usb2: Product: EHCI Host Controller
[ 1.453917] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.454043] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.454230] hub 2-0:1.0: USB hub found
[ 1.454353] hub 2-0:1.0: 6 ports detected
[ 1.454526] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.454672] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.454816] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.454946] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.454948] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.455106] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.455343] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.455487] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.455616] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.455835] usb usb3: Product: UHCI Host Controller
[ 1.455958] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.456084] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.456271] hub 3-0:1.0: USB hub found
[ 1.456395] hub 3-0:1.0: 2 ports detected
[ 1.456548] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.456678] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.456680] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.456836] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.457078] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.457222] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.457349] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.457570] usb usb4: Product: UHCI Host Controller
[ 1.457693] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.457819] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.458005] hub 4-0:1.0: USB hub found
[ 1.458128] hub 4-0:1.0: 2 ports detected
[ 1.458279] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.458408] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.458410] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.458568] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.458812] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.458955] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.459081] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.459299] usb usb5: Product: UHCI Host Controller
[ 1.459422] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.459550] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.459737] hub 5-0:1.0: USB hub found
[ 1.459862] hub 5-0:1.0: 2 ports detected
[ 1.460012] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.460141] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.460143] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.460298] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.460537] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.460680] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.460807] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.461026] usb usb6: Product: UHCI Host Controller
[ 1.461149] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.461275] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.461461] hub 6-0:1.0: USB hub found
[ 1.461587] hub 6-0:1.0: 2 ports detected
[ 1.461738] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.461868] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.461870] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.462026] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.462262] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.462405] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.462534] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.462753] usb usb7: Product: UHCI Host Controller
[ 1.462876] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.463002] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.463188] hub 7-0:1.0: USB hub found
[ 1.463311] hub 7-0:1.0: 2 ports detected
[ 1.463460] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.463592] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.463594] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.463752] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.463989] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.464132] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.464259] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.464479] usb usb8: Product: UHCI Host Controller
[ 1.464603] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.464729] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.464914] hub 8-0:1.0: USB hub found
[ 1.465037] hub 8-0:1.0: 2 ports detected
[ 1.465202] Initializing USB Mass Storage driver...
[ 1.465362] usbcore: registered new interface driver usb-storage
[ 1.465490] USB Mass Storage support registered.
[ 1.465648] usbcore: registered new interface driver libusual
[ 1.465822] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.467563] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.467690] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.467863] mice: PS/2 mouse device common for all mice
[ 1.468089] i2c /dev entries driver
[ 1.468246] md: raid0 personality registered for level 0
[ 1.468374] md: raid1 personality registered for level 1
[ 1.468588] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.468811] cpuidle: using governor ladder
[ 1.468933] cpuidle: using governor menu
[ 1.469169] usbcore: registered new interface driver hiddev
[ 1.469319] usbcore: registered new interface driver usbhid
[ 1.469444] usbhid: USB HID core driver
[ 1.469723] TCP cubic registered
[ 1.469844] NET: Registered protocol family 17
[ 1.470368] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.484912] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.722639] ata1: XXX SControl after resume = 300, tries=1
[ 1.722642] ata2: XXX SControl after resume = 300, tries=1
[ 1.723637] ata4.00: XXX SControl after resume = 300, tries=1
[ 1.723775] ata3.00: XXX SControl after resume = 300, tries=1
[ 1.726627] ata5: XXX SControl after resume = 300, tries=1
[ 1.726631] ata6: XXX SControl after resume = 300, tries=1
[ 1.824412] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.824415] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.825387] ata4.01: hard resetting link
[ 1.825389] ata3.01: hard resetting link
[ 1.835357] ata1: EH complete
[ 1.835488] ata2: EH complete
[ 1.979041] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.979058] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.982314] ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 1.982455] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.982650] ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 1.982778] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.986261] ata5.00: configured for UDMA/133
[ 1.986384] ata5: EH complete
[ 1.986729] ata6.00: configured for UDMA/133
[ 1.989480] ata6: EH complete
[ 2.053819] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.128633] ata3.01: XXX SControl after resume = 300, tries=1
[ 2.128636] ata4.01: XXX SControl after resume = 300, tries=1
[ 2.215465] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.215600] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.215728] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
[ 2.215854] usb 3-2: Manufacturer: American Power Conversion
[ 2.215980] usb 3-2: SerialNumber: 3B1007X44377
[ 2.299349] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
[ 2.381060] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.381201] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.387120] ata3.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
[ 2.387421] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.387557] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.393120] ata3.00: configured for UDMA/100
[ 2.399256] ata3.01: configured for UDMA/133
[ 2.399887] ata3: EH complete
[ 2.412269] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
[ 2.417252] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.417480] Uniform CD-ROM driver Revision: 3.20
[ 2.417672] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.417726] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.417922] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.418256] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.418275] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.418625] sd 2:0:1:0: [sda] Write Protect is off
[ 2.418749] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.418760] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.419049] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.460117] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.488796] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.488938] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.495317] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.495452] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.495750] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.495885] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.502015] ata4.00: configured for UDMA/133
[ 2.504704] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.508033] ata4.01: configured for UDMA/133
[ 2.508163] ata4: EH complete
[ 2.508322] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.508635] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.508669] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.508731] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.508834] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.508858] sd 3:0:1:0: [sdc] Write Protect is off
[ 2.508859] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.508865] sd 3:0:1:0: Attached scsi generic sg3 type 0
[ 2.508870] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.508937] sdc:
[ 2.508943] scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.509051] sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.509081] sd 4:0:0:0: [sdd] Write Protect is off
[ 2.509083] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.509093] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 2.509098] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.509167] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.509236] sdd:
[ 2.509319] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.509337] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 2.509345] sd 5:0:0:0: [sde] Write Protect is off
[ 2.509346] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.509357] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.509421] sde: sdd1
[ 2.518069] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 2.520284] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.520424] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.520426] sde1
[ 2.520436] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.520796]
[ 2.520931] sdc1 sdc2 sdc3 sdc4 <
[ 2.521242] sd 5:0:0:0: [sde] Attached SCSI disk
[ 2.529565] sdb: sdc5 sdb1 sdb2 sdb3 sdb4 < sdc6 >
[ 2.569623] sdb5 sdb6 >
[ 2.609814] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 2.610052] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.676902] usb 8-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.677037] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.677164] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.677295] usb 8-2: Manufacturer: Microsoft
[ 2.694993] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.695290] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 4.586288] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.593788] md: Waiting for all devices to be available before autodetect
[ 4.593924] md: If you don't use raid, use raid=noautodetect
[ 4.594133] md: Autodetecting RAID arrays.
[ 4.674282] md: Scanned 6 and added 6 devices.
[ 4.674416] md: autorun ...
[ 4.674536] md: considering sdb5 ...
[ 4.674660] md: adding sdb5 ...
[ 4.674782] md: sdb3 has different UUID to sdb5
[ 4.674906] md: adding sdc5 ...
[ 4.675028] md: sdc3 has different UUID to sdb5
[ 4.675153] md: adding sda5 ...
[ 4.675274] md: sda3 has different UUID to sdb5
[ 4.675473] md: created md5
[ 4.675594] md: bind<sda5>
[ 4.675718] md: bind<sdc5>
[ 4.675842] md: bind<sdb5>
[ 4.675965] md: running: <sdb5><sdc5><sda5>
[ 4.676253] raid1: raid set md5 active with 3 out of 3 mirrors
[ 4.676392] md5: detected capacity change from 0 to 53694496768
[ 4.676535] md: considering sdb3 ...
[ 4.676659] md: adding sdb3 ...
[ 4.676781] md: adding sdc3 ...
[ 4.676903] md: adding sda3 ...
[ 4.677092] md: created md3
[ 4.677213] md: bind<sda3>
[ 4.677340] md: bind<sdc3>
[ 4.677464] md: bind<sdb3>
[ 4.677588] md: running: <sdb3><sdc3><sda3>
[ 4.677871] raid1: raid set md3 active with 3 out of 3 mirrors
[ 4.678006] md3: detected capacity change from 0 to 53694562304
[ 4.678148] md: ... autorun DONE.
[ 4.678303] md5: unknown partition table
[ 4.695606] kjournald starting. Commit interval 5 seconds
[ 4.695612] EXT3-fs (md5): mounted filesystem with writeback data mode
[ 4.695623] VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
[ 4.695996] Freeing unused kernel memory: 476k freed
[ 4.696175] Write protecting the kernel read-only data: 6144k
[ 4.696385] Freeing unused kernel memory: 448k freed
[ 4.696580] Freeing unused kernel memory: 248k freed
[ 6.572290] udev: starting version 149
[ 6.656534] md3: unknown partition table
[ 6.672367] rtc_cmos 00:03: RTC can wake from S4
[ 6.672410] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.672435] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.834485] sky2: driver version 1.27
[ 6.834515] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.834526] sky2 0000:06:00.0: setting latency timer to 64
[ 6.834560] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.834643] sky2 0000:06:00.0: irq 55 for MSI/MSI-X
[ 6.834813] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
[ 6.834826] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.834833] sky2 0000:04:00.0: setting latency timer to 64
[ 6.834849] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.834928] sky2 0000:04:00.0: irq 56 for MSI/MSI-X
[ 6.835089] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
[ 6.846552] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.846556] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f pref window disabled]
[ 6.846558] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.986208] Linux agpgart interface v0.103
[ 7.013690] [drm] Initialized drm 1.1.0 20060810
[ 7.207949] [drm] radeon defaulting to kernel modesetting.
[ 7.207950] [drm] radeon kernel modesetting enabled.
[ 7.207985] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 7.207988] radeon 0000:03:00.0: setting latency timer to 64
[ 7.208692] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[ 7.208862] [drm] register mmio base: 0xFBAC0000
[ 7.208864] [drm] register mmio size: 131072
[ 7.208930] ATOM BIOS: JUNIPER
[ 7.208939] [drm] Clocks initialized !
[ 7.208940] [drm] 1 Power State(s)
[ 7.208941] [drm] State 0 Default (default)
[ 7.208942] [drm] 16 PCIE Lanes
[ 7.208942] [drm] 1 Clock Mode(s)
[ 7.208943] [drm] 0 engine/memory: 850000/1200000
[ 7.208947] [drm] radeon: power management initialized
[ 7.208953] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 7.208954] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 7.208965] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 7.208966] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.208967] [drm] RAM width 128bits DDR
[ 7.208991] [TTM] Zone kernel: Available graphics memory: 6151634 kiB.
[ 7.208992] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 7.208999] [drm] radeon: 256M of VRAM memory ready
[ 7.209000] [drm] radeon: 512M of GTT memory ready.
[ 7.210356] [drm] Radeon Display Connectors
[ 7.210358] [drm] Connector 0:
[ 7.210359] [drm] DisplayPort
[ 7.210360] [drm] HPD4
[ 7.210362] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 7.210364] [drm] Encoders:
[ 7.210365] [drm] DFP1: INTERNAL_UNIPHY2
[ 7.210366] [drm] Connector 1:
[ 7.210368] [drm] HDMI-A
[ 7.210369] [drm] HPD5
[ 7.210371] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 7.210372] [drm] Encoders:
[ 7.210374] [drm] DFP2: INTERNAL_UNIPHY2
[ 7.210375] [drm] Connector 2:
[ 7.210376] [drm] DVI-I
[ 7.210378] [drm] HPD1
[ 7.210379] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 7.210381] [drm] Encoders:
[ 7.210383] [drm] DFP3: INTERNAL_UNIPHY1
[ 7.210384] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.210385] [drm] Connector 3:
[ 7.210387] [drm] DVI-I
[ 7.210388] [drm] HPD6
[ 7.210390] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 7.210391] [drm] Encoders:
[ 7.210393] [drm] DFP4: INTERNAL_UNIPHY
[ 7.210394] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.224096] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.224134] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 7.224154] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.559987] [drm] fb mappable at 0xD0040000
[ 7.559988] [drm] vram apper at 0xD0000000
[ 7.559989] [drm] size 8294400
[ 7.559990] [drm] fb depth is 24
[ 7.559991] [drm] pitch is 7680
[ 7.568419] Console: switching to colour frame buffer device 240x67
[ 7.572428] fb0: radeondrmfb frame buffer device
[ 7.572429] registered panic notifier
[ 7.572432] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
[ 7.625341] hda_codec: AD1989B: BIOS auto-probing.
[ 7.627623] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 7.627665] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
[ 7.627681] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 8.352007] EXT3-fs (md5): using internal journal
[ 8.696417] md: md11 stopped.
[ 8.734033] md: bind<sde1>
[ 8.734201] md: bind<sdd1>
[ 8.734684] raid0: looking at sdd1
[ 8.734685] raid0: comparing sdd1(104871936)
[ 8.734687] with sdd1(104871936)
[ 8.734687] raid0: END
[ 8.734688] raid0: ==> UNIQUE
[ 8.734689] raid0: 1 zones
[ 8.734690] raid0: looking at sde1
[ 8.734691] raid0: comparing sde1(104871936)
[ 8.734692] with sdd1(104871936)
[ 8.734692] raid0: EQUAL
[ 8.734693] raid0: FINAL 1 zones
[ 8.734695] raid0: done.
[ 8.734696] raid0 : md_size is 209743872 sectors.
[ 8.734697] ******* md11 configuration *********
[ 8.734697] zone0=[sdd1/sde1/]
[ 8.734699] zone offset=0kb device offset=0kb size=104871936kb
[ 8.734700] **********************************
[ 8.734701]
[ 8.734704] md11: detected capacity change from 0 to 107388862464
[ 8.735194] md11: unknown partition table
[ 8.739419] md: md6 stopped.
[ 8.753414] md: bind<sdb6>
[ 8.753594] md: bind<sdc6>
[ 8.753798] md: bind<sda6>
[ 8.754290] raid1: raid set md6 active with 3 out of 3 mirrors
[ 8.754303] md6: detected capacity change from 0 to 253354939392
[ 8.754703] md6: unknown partition table
[ 9.285892] kjournald starting. Commit interval 5 seconds
[ 9.285896] EXT3-fs (md11): warning: maximal mount count reached, running e2fsck is recommended
[ 9.286154] EXT3-fs (md11): using internal journal
[ 9.286159] EXT3-fs (md11): mounted filesystem with writeback data mode
[ 9.313107] kjournald starting. Commit interval 5 seconds
[ 9.313115] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 9.329466] EXT3-fs (md6): using internal journal
[ 9.329471] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 9.378643] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 9.380065] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 9.381329] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 14.429071] sky2 0000:06:00.0: eth0: enabling interface
[ 16.255372] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 21.268489] NET: Registered protocol family 10
[ 23.625830] /dev/vmmon[4198]: Module vmmon: registered with major=10 minor=165
[ 23.625838] /dev/vmmon[4198]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 23.625843] /dev/vmmon[4198]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 23.625845] /dev/vmmon[4198]: Module vmmon: initialized
[ 23.720873] /dev/vmci[4217]: VMCI: Driver initialized.
[ 23.720888] /dev/vmci[4217]: Module vmci: registered with major=10 minor=59
[ 23.720890] /dev/vmci[4217]: Module vmci: initialized
[ 24.004913] /dev/vmnet: open called by PID 4299 (vmnet-bridge)
[ 24.004919] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 24.004938] /dev/vmnet: port on hub 0 successfully opened
[ 24.004948] bridge-eth0: up
[ 24.004950] bridge-eth0: attached
[ 25.719515] /dev/vmnet: open called by PID 4306 (vmnet-dhcpd)
[ 25.719519] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 25.719538] /dev/vmnet: port on hub 1 successfully opened
[ 25.783582] /dev/vmnet: open called by PID 4308 (vmnet-netifup)
[ 25.783587] /dev/vmnet: port on hub 1 successfully opened
[ 25.816791] /dev/vmnet: open called by PID 4311 (vmnet-dhcpd)
[ 25.816796] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 25.816814] /dev/vmnet: port on hub 8 successfully opened
[ 25.909004] /dev/vmnet: open called by PID 4315 (vmnet-natd)
[ 25.909010] /dev/vmnet: port on hub 8 successfully opened
[ 25.914215] /dev/vmnet: open called by PID 4316 (vmnet-netifup)
[ 25.914222] /dev/vmnet: port on hub 8 successfully opened
[ 31.793962] eth0: no IPv6 routers present
[ 36.413430] vmnet8: no IPv6 routers present
[ 36.550082] vmnet1: no IPv6 routers present
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-07 15:34 ` Mark Knecht
@ 2010-07-07 15:48 ` Tejun Heo
2010-07-07 16:15 ` Mark Knecht
2010-07-07 17:06 ` Mark Knecht
0 siblings, 2 replies; 55+ messages in thread
From: Tejun Heo @ 2010-07-07 15:48 UTC (permalink / raw)
To: Mark Knecht; +Cc: Linux Kernel List, linux-ide
[-- Attachment #1: Type: text/plain, Size: 1468 bytes --]
Hello,
On 07/07/2010 05:34 PM, Mark Knecht wrote:
> OK - I don't know if this was you intention but since adding this
> patch I've not had a single drive missing failure. I've cold booted
> about 8 times and warm booted at least 20 times. Every one has come up
> fine. I've even gone so far as to turn off the UPS and sit for 5
> minutes before cold booting. Still nothing fails right now.
>
> I've had this sort of statistical thing happen before where it hasn't
> failed for days, maybe even weeks, but then it starts failing and
> fails every time for awhile. Over the past few days working with you
> I've never had to reboot more than twice to get you a file. Now I've
> tried 30 times this morning and I've come up with nothing.
>
> I will continue to watch the machine and send you the failing dmesg
> file whenever I finally get it. For now I can only attach the passing
> file showing the patch is now included.
It seems like SIDPR is a bit more unreliable than the current code can
handle and the added delay and read could have affected the result.
Eh... weird. Can you please apply the attached patch instead? The
only difference is it will print out two SControl values instead of
one. ie. "XXX SControl after resume = AAA BBB, tries=T". Can you
please try to boot multiple times and see if AAA and BBB differ
anytime? If that happens, please attach the boot log. Also, if you
see one with T > 1, please attach that one too.
Thanks.
--
tejun
[-- Attachment #2: resume-dbg-1.patch --]
[-- Type: text/x-patch, Size: 1365 bytes --]
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2984e45..ce87bfe 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3712,7 +3712,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
unsigned long deadline)
{
int tries = ATA_LINK_RESUME_TRIES;
- u32 scontrol, serror;
+ u32 scontrol, scontrol1, serror;
int rc;
if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
@@ -3739,6 +3739,14 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
return rc;
} while ((scontrol & 0xf0f) != 0x300 && --tries);
+ /* check once more */
+ msleep(100);
+ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol1)))
+ return rc;
+ ata_link_printk(link, KERN_ERR,
+ "XXX SControl after resume = %X %X, tries=%d\n",
+ scontrol, scontrol1, ATA_LINK_RESUME_TRIES - tries + 1);
+
if ((scontrol & 0xf0f) != 0x300) {
ata_link_printk(link, KERN_ERR,
"failed to resume link (SControl %X)\n",
@@ -6007,7 +6015,7 @@ static void async_port_probe(void *data, async_cookie_t cookie)
ehi->probe_mask |= ATA_ALL_DEVICES;
ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
- ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
+ ehi->flags |= ATA_EHI_NO_AUTOPSY/* | ATA_EHI_QUIET*/;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
ap->pflags |= ATA_PFLAG_LOADING;
^ permalink raw reply related [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-07 15:48 ` Tejun Heo
@ 2010-07-07 16:15 ` Mark Knecht
2010-07-07 16:19 ` Tejun Heo
2010-07-07 17:06 ` Mark Knecht
1 sibling, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-07 16:15 UTC (permalink / raw)
To: Tejun Heo; +Cc: Linux Kernel List, linux-ide
On Wed, Jul 7, 2010 at 8:48 AM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On 07/07/2010 05:34 PM, Mark Knecht wrote:
>> OK - I don't know if this was you intention but since adding this
>> patch I've not had a single drive missing failure. I've cold booted
>> about 8 times and warm booted at least 20 times. Every one has come up
>> fine. I've even gone so far as to turn off the UPS and sit for 5
>> minutes before cold booting. Still nothing fails right now.
>>
>> I've had this sort of statistical thing happen before where it hasn't
>> failed for days, maybe even weeks, but then it starts failing and
>> fails every time for awhile. Over the past few days working with you
>> I've never had to reboot more than twice to get you a file. Now I've
>> tried 30 times this morning and I've come up with nothing.
>>
>> I will continue to watch the machine and send you the failing dmesg
>> file whenever I finally get it. For now I can only attach the passing
>> file showing the patch is now included.
>
> It seems like SIDPR is a bit more unreliable than the current code can
> handle and the added delay and read could have affected the result.
> Eh... weird. Can you please apply the attached patch instead? The
> only difference is it will print out two SControl values instead of
> one. ie. "XXX SControl after resume = AAA BBB, tries=T". Can you
> please try to boot multiple times and see if AAA and BBB differ
> anytime? If that happens, please attach the boot log. Also, if you
> see one with T > 1, please attach that one too.
>
> Thanks.
>
> --
> tejun
>
Certainly. Is there a way to reverse the previous patch?
c2stable linux # patch -p1 --dry-run <~mark/Downloads/resume-dbg-1.patch
patching file drivers/ata/libata-core.c
Hunk #1 succeeded at 3798 (offset 86 lines).
Hunk #2 succeeded at 3833 with fuzz 2 (offset 94 lines).
Hunk #3 FAILED at 6109.
1 out of 3 hunks FAILED -- saving rejects to file drivers/ata/libata-core.c.rej
c2stable linux #
I assume this is failing because your patch is over the plain kernel,
not the one I've patched?
Thanks,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-07 16:15 ` Mark Knecht
@ 2010-07-07 16:19 ` Tejun Heo
2010-07-07 16:27 ` Mark Knecht
0 siblings, 1 reply; 55+ messages in thread
From: Tejun Heo @ 2010-07-07 16:19 UTC (permalink / raw)
To: Mark Knecht; +Cc: Linux Kernel List, linux-ide
On 07/07/2010 06:15 PM, Mark Knecht wrote:
> Certainly. Is there a way to reverse the previous patch?
>
> c2stable linux # patch -p1 --dry-run <~mark/Downloads/resume-dbg-1.patch
> patching file drivers/ata/libata-core.c
> Hunk #1 succeeded at 3798 (offset 86 lines).
> Hunk #2 succeeded at 3833 with fuzz 2 (offset 94 lines).
> Hunk #3 FAILED at 6109.
> 1 out of 3 hunks FAILED -- saving rejects to file drivers/ata/libata-core.c.rej
> c2stable linux #
>
> I assume this is failing because your patch is over the plain kernel,
> not the one I've patched?
$ patch -R -p1 < ~mark/Downloads/resume-dbg.patch
$ patch -p1 < ~mark/Downloads/resume-dbg-1.patch
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-07 16:19 ` Tejun Heo
@ 2010-07-07 16:27 ` Mark Knecht
0 siblings, 0 replies; 55+ messages in thread
From: Mark Knecht @ 2010-07-07 16:27 UTC (permalink / raw)
To: Tejun Heo; +Cc: Linux Kernel List, linux-ide
On Wed, Jul 7, 2010 at 9:19 AM, Tejun Heo <tj@kernel.org> wrote:
> On 07/07/2010 06:15 PM, Mark Knecht wrote:
>> Certainly. Is there a way to reverse the previous patch?
>>
>> c2stable linux # patch -p1 --dry-run <~mark/Downloads/resume-dbg-1.patch
>> patching file drivers/ata/libata-core.c
>> Hunk #1 succeeded at 3798 (offset 86 lines).
>> Hunk #2 succeeded at 3833 with fuzz 2 (offset 94 lines).
>> Hunk #3 FAILED at 6109.
>> 1 out of 3 hunks FAILED -- saving rejects to file drivers/ata/libata-core.c.rej
>> c2stable linux #
>>
>> I assume this is failing because your patch is over the plain kernel,
>> not the one I've patched?
>
> $ patch -R -p1 < ~mark/Downloads/resume-dbg.patch
> $ patch -p1 < ~mark/Downloads/resume-dbg-1.patch
>
> --
> tejun
>
Thanks. Building the new kernel now. I'll start trying to save the
data you're looking for.
Cheers,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-07 15:48 ` Tejun Heo
2010-07-07 16:15 ` Mark Knecht
@ 2010-07-07 17:06 ` Mark Knecht
2010-07-07 17:26 ` Tejun Heo
1 sibling, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-07 17:06 UTC (permalink / raw)
To: Tejun Heo; +Cc: Linux Kernel List, linux-ide
[-- Attachment #1: Type: text/plain, Size: 2062 bytes --]
On Wed, Jul 7, 2010 at 8:48 AM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On 07/07/2010 05:34 PM, Mark Knecht wrote:
>> OK - I don't know if this was you intention but since adding this
>> patch I've not had a single drive missing failure. I've cold booted
>> about 8 times and warm booted at least 20 times. Every one has come up
>> fine. I've even gone so far as to turn off the UPS and sit for 5
>> minutes before cold booting. Still nothing fails right now.
>>
>> I've had this sort of statistical thing happen before where it hasn't
>> failed for days, maybe even weeks, but then it starts failing and
>> fails every time for awhile. Over the past few days working with you
>> I've never had to reboot more than twice to get you a file. Now I've
>> tried 30 times this morning and I've come up with nothing.
>>
>> I will continue to watch the machine and send you the failing dmesg
>> file whenever I finally get it. For now I can only attach the passing
>> file showing the patch is now included.
>
> It seems like SIDPR is a bit more unreliable than the current code can
> handle and the added delay and read could have affected the result.
> Eh... weird. Can you please apply the attached patch instead? The
> only difference is it will print out two SControl values instead of
> one. ie. "XXX SControl after resume = AAA BBB, tries=T". Can you
> please try to boot multiple times and see if AAA and BBB differ
> anytime? If that happens, please attach the boot log. Also, if you
> see one with T > 1, please attach that one too.
>
> Thanks.
>
> --
> tejun
>
4 warm reboots. All 4 said 300 300. However the 4th one only showed an
extra attempt at running the patch code with and also showed Tries =
2. I'm attaching boot #1 and boot #4 for now. I've saved them all if
you need or just want them.
Please note that in all 4 cases all drives were found. Nothing is
missing in any test yet after adding these either of these patches.
I've not tried cold boots yet. That's next.
Cheers,
Mark
[-- Attachment #2: dmesg.Patch-R1.Test1 --]
[-- Type: application/octet-stream, Size: 63626 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #6 SMP PREEMPT Wed Jul 7 09:27:12 PDT 2010
[ 0.000000] Command line: root=/dev/md5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 1G
[ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000
[ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143439
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 12
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] early_res array is doubled to 64 at [14000 - 147ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
[ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
[ 0.000000] Kernel command line: root=/dev/md5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] early_res array is doubled to 128 at [14800 - 157ff]
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (60 early reservations)
[ 0.000000] #1 [0001000000 - 0001771144] TEXT DATA BSS
[ 0.000000] #2 [0001772000 - 0001772298] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved
[ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM
[ 0.000000] #11 [0001771180 - 0001771780] BOOTMEM
[ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM
[ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM
[ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0
[ 0.000000] #15 [0001771780 - 0001771900] BOOTMEM
[ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM
[ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM
[ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM
[ 0.000000] #19 [0001771900 - 0001771941] BOOTMEM
[ 0.000000] #20 [0001771980 - 0001771a06] BOOTMEM
[ 0.000000] #21 [0001771a40 - 0001771ca8] BOOTMEM
[ 0.000000] #22 [0001771cc0 - 0001771d28] BOOTMEM
[ 0.000000] #23 [0001771d40 - 0001771da8] BOOTMEM
[ 0.000000] #24 [0001771dc0 - 0001771e28] BOOTMEM
[ 0.000000] #25 [0001771e40 - 0001771ea8] BOOTMEM
[ 0.000000] #26 [0001771ec0 - 0001771f28] BOOTMEM
[ 0.000000] #27 [0001771f40 - 0001771fa8] BOOTMEM
[ 0.000000] #28 [00017a32c0 - 00017a3328] BOOTMEM
[ 0.000000] #29 [00017a3340 - 00017a33a8] BOOTMEM
[ 0.000000] #30 [00017a33c0 - 00017a3428] BOOTMEM
[ 0.000000] #31 [00017a3440 - 00017a34a8] BOOTMEM
[ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM
[ 0.000000] #33 [00017a34c0 - 00017a34ce] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM
[ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM
[ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM
[ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM
[ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM
[ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM
[ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM
[ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM
[ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM
[ 0.000000] #46 [00017a3500 - 00017a3508] BOOTMEM
[ 0.000000] #47 [00017a3540 - 00017a3548] BOOTMEM
[ 0.000000] #48 [00017a3580 - 00017a35b0] BOOTMEM
[ 0.000000] #49 [00017a35c0 - 00017a3620] BOOTMEM
[ 0.000000] #50 [00017a3640 - 00017a3750] BOOTMEM
[ 0.000000] #51 [00017a3780 - 00017a37c8] BOOTMEM
[ 0.000000] #52 [00017a3800 - 00017a3848] BOOTMEM
[ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM
[ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM
[ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM
[ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM
[ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM
[ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM
[ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 12302060k/13631488k available (3630k kernel code, 1057732k absent, 271696k reserved, 2958k data, 476k init)
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3337.974 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6675.94 BogoMIPS (lpj=3337974)
[ 0.000294] Security Framework initialized
[ 0.000434] Mount-cache hash table entries: 256
[ 0.000639] CPU: Physical Processor ID: 0
[ 0.000764] CPU: Processor Core ID: 0
[ 0.000891] mce: CPU supports 9 MCE banks
[ 0.001026] CPU0: Thermal monitoring enabled (TM1)
[ 0.001159] using mwait in idle threads.
[ 0.001291] Performance Events: Westmere events, Intel PMU driver.
[ 0.001471] ... version: 3
[ 0.001596] ... bit width: 48
[ 0.001720] ... generic registers: 4
[ 0.001845] ... value mask: 0000ffffffffffff
[ 0.001971] ... max period: 000000007fffffff
[ 0.002098] ... fixed-purpose events: 3
[ 0.002230] ... event mask: 000000070000000f
[ 0.002377] Freeing SMP alternatives: 36k freed
[ 0.002507] ACPI: Core revision 20100121
[ 0.041880] Setting APIC routing to physical flat
[ 0.042447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056901] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
[ 0.164785] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
[ 1.202010] Brought up 12 CPUs
[ 1.202134] Total of 12 processors activated (80895.70 BogoMIPS).
[ 1.208649] NET: Registered protocol family 16
[ 1.211558] ACPI: bus type pci registered
[ 1.211739] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.211967] PCI: not using MMCONFIG
[ 1.212090] PCI: Using configuration type 1 for base access
[ 1.214125] bio: create slab <bio-0> at 0
[ 1.215469] ACPI: EC: Look up EC in DSDT
[ 1.216585] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.296194] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.297018] ACPI: Interpreter enabled
[ 1.297142] ACPI: (supports S0 S5)
[ 1.297318] ACPI: Using IOAPIC for interrupt routing
[ 1.297483] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.299280] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.323706] ACPI: No dock devices found.
[ 1.323831] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.324159] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.324501] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.324630] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.324760] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.324981] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.325202] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.325424] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.325688] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.325691] pci 0000:00:00.0: PME# disabled
[ 1.325733] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.325735] pci 0000:00:01.0: PME# disabled
[ 1.325777] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.325779] pci 0000:00:03.0: PME# disabled
[ 1.325823] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.325825] pci 0000:00:07.0: PME# disabled
[ 1.325993] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
[ 1.326045] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
[ 1.326098] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
[ 1.326150] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 1.326195] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.326199] pci 0000:00:1a.7: PME# disabled
[ 1.326226] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 1.326259] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.326262] pci 0000:00:1b.0: PME# disabled
[ 1.326312] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.326315] pci 0000:00:1c.0: PME# disabled
[ 1.326368] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.326371] pci 0000:00:1c.2: PME# disabled
[ 1.326424] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.326426] pci 0000:00:1c.4: PME# disabled
[ 1.326479] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.326481] pci 0000:00:1c.5: PME# disabled
[ 1.326520] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
[ 1.326574] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
[ 1.326626] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
[ 1.326680] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 1.326726] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.326729] pci 0000:00:1d.7: PME# disabled
[ 1.326824] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 1.327047] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.327177] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.327438] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
[ 1.327442] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
[ 1.327446] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
[ 1.327450] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
[ 1.327454] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
[ 1.327458] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
[ 1.327494] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 1.327504] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.327534] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
[ 1.327538] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
[ 1.327542] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
[ 1.327546] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
[ 1.327550] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
[ 1.327554] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
[ 1.327605] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.327733] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.327736] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.327739] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.327766] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.327892] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.327895] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.327898] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.327939] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.327946] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[ 1.327950] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
[ 1.327956] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[ 1.327970] pci 0000:03:00.0: supports D1 D2
[ 1.327992] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[ 1.328019] pci 0000:03:00.1: supports D1 D2
[ 1.328030] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.328156] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.328158] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.328162] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.328194] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.328321] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.328323] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.328328] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.328392] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.328399] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.328421] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.328456] pci 0000:06:00.0: supports D1 D2
[ 1.328457] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.328461] pci 0000:06:00.0: PME# disabled
[ 1.328471] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.328599] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.328601] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.328606] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.328705] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 1.328739] pci 0000:05:00.0: PME# supported from D3hot
[ 1.328743] pci 0000:05:00.0: PME# disabled
[ 1.333508] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.333515] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
[ 1.333523] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
[ 1.333530] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.333537] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.333592] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.333723] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.333725] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.333730] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.333797] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 1.333804] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.333826] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 1.333861] pci 0000:04:00.0: supports D1 D2
[ 1.333862] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.333866] pci 0000:04:00.0: PME# disabled
[ 1.333876] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.334003] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.334006] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.334010] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.334050] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 1.334056] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
[ 1.334093] pci 0000:08:02.0: supports D2
[ 1.334094] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 1.334097] pci 0000:08:02.0: PME# disabled
[ 1.334133] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.334262] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.334265] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.334269] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.334271] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.334273] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.334274] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.334276] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.334277] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.334279] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.334304] pci_bus 0000:00: on NUMA node 0
[ 1.334311] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.334561] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.334644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.334690] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.334735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.334788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.334830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.334872] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.334914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.355376] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.355865] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.356148] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.356633] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.357116] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.357602] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.358085] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.358571] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.359156] SCSI subsystem initialized
[ 1.359387] libata version 3.00 loaded.
[ 1.359474] usbcore: registered new interface driver usbfs
[ 1.359622] usbcore: registered new interface driver hub
[ 1.359771] usbcore: registered new device driver usb
[ 1.360008] PCI: Using ACPI for IRQ routing
[ 1.360133] PCI: pci_cache_line_size set to 64 bytes
[ 1.360218] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.360219] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.360289] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.360541] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.362679] Switching to clocksource tsc
[ 1.363178] pnp: PnP ACPI init
[ 1.363303] ACPI: bus type pnp registered
[ 1.365861] pnp: PnP ACPI: found 17 devices
[ 1.365985] ACPI: ACPI bus type pnp unregistered
[ 1.366114] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.366241] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.366368] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.366495] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.366627] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.366755] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.366885] system 00:07: [io 0x0290-0x029f] has been reserved
[ 1.367012] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.367138] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.367265] system 00:08: [io 0x0500-0x057f] could not be reserved
[ 1.367391] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.367519] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.367648] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.367777] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.367907] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.368034] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.368163] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.368292] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.368419] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.368548] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.368676] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.368804] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.373793] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.373921] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.374142] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.374362] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.374585] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.374711] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.374836] pci 0000:00:01.0: bridge window [io disabled]
[ 1.374963] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.375089] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.375217] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.375341] pci 0000:00:03.0: bridge window [io disabled]
[ 1.375468] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.375597] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.375725] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.375850] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.375978] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.376106] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.376329] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.376454] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.376584] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.376713] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.376936] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.377061] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.377189] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.377318] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.377543] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.377668] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.377797] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.377925] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.378148] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.378273] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.378401] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.378531] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.378754] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.378879] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.379007] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.379135] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.379269] pci 0000:00:01.0: setting latency timer to 64
[ 1.379275] pci 0000:00:03.0: setting latency timer to 64
[ 1.379280] pci 0000:00:07.0: setting latency timer to 64
[ 1.379285] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.379414] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.379544] pci 0000:00:1c.0: setting latency timer to 64
[ 1.379551] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.379679] pci 0000:00:1c.2: setting latency timer to 64
[ 1.379685] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.379813] pci 0000:00:1c.4: setting latency timer to 64
[ 1.379820] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.379948] pci 0000:00:1c.5: setting latency timer to 64
[ 1.379953] pci 0000:00:1e.0: setting latency timer to 64
[ 1.379955] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.379956] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.379957] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.379959] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.379960] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.379961] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.379963] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 1.379964] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.379965] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.379967] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.379968] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.379969] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.379971] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.379972] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.379973] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.379974] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.379976] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.379977] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.379978] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.379979] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.379981] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.379982] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 1.379983] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.379985] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.379986] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.379987] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.379988] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.379990] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.379991] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.380031] NET: Registered protocol family 2
[ 1.380204] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.380878] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.381556] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.381784] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.381912] TCP reno registered
[ 1.382034] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.382195] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.382438] NET: Registered protocol family 1
[ 1.382708] RPC: Registered udp transport module.
[ 1.382832] RPC: Registered tcp transport module.
[ 1.382956] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.383220] pci 0000:03:00.0: Boot video device
[ 1.383234] PCI: CLS 256 bytes, default 64
[ 1.383259] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.383386] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
[ 1.383610] software IO TLB at phys 0xe000000 - 0x12000000
[ 1.385837] VFS: Disk quotas dquot_6.5.2
[ 1.385979] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.386372] NTFS driver 2.1.29 [Flags: R/W].
[ 1.386533] fuse init (API version 7.13)
[ 1.386707] msgmni has been set to 24027
[ 1.387054] alg: No test for stdrng (krng)
[ 1.387210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.387431] io scheduler noop registered
[ 1.387553] io scheduler deadline registered
[ 1.387692] io scheduler cfq registered (default)
[ 1.387880] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.387904] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.387968] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.387990] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.388050] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.388075] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.388138] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.388165] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.388251] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.388278] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.388362] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.388389] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.388473] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.388500] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.388601] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.388605] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.388608] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.390144] Non-volatile memory driver v1.3
[ 1.390360] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.390582] ACPI: Power Button [PWRB]
[ 1.390738] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.390958] ACPI: Power Button [PWRF]
[ 1.391600] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.392878] brd: module loaded
[ 1.393430] loop: module loaded
[ 1.393661] ahci 0000:05:00.0: version 3.0
[ 1.393674] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.403843] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.404074] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.404206] ahci 0000:05:00.0: setting latency timer to 64
[ 1.404284] scsi0 : ahci
[ 1.404478] scsi1 : ahci
[ 1.407292] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.407514] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.407751] ata1: hard resetting link
[ 1.407760] ata2: hard resetting link
[ 1.407775] ata_piix 0000:00:1f.2: version 2.13
[ 1.407784] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.407787] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.407808] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.407839] scsi2 : ata_piix
[ 1.407899] scsi3 : ata_piix
[ 1.409162] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[ 1.409293] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[ 1.409435] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.409449] ata3.00: hard resetting link
[ 1.409462] ata4.00: hard resetting link
[ 1.409809] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.410077] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.410098] scsi4 : ata_piix
[ 1.410278] scsi5 : ata_piix
[ 1.411464] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[ 1.411593] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[ 1.411745] ata5: hard resetting link
[ 1.411756] ata6: hard resetting link
[ 1.411993] console [netcon0] enabled
[ 1.412118] netconsole: network logging started
[ 1.412301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.412439] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.412574] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.412576] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.412740] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.412976] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.416971] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.416980] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.425763] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.425908] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.426037] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.426257] usb usb1: Product: EHCI Host Controller
[ 1.426381] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.426507] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.426704] hub 1-0:1.0: USB hub found
[ 1.426829] hub 1-0:1.0: 6 ports detected
[ 1.426993] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.427128] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.427130] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.427287] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.427522] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.431520] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.431529] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.440726] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.440866] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.440996] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.441215] usb usb2: Product: EHCI Host Controller
[ 1.441339] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.441465] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.441656] hub 2-0:1.0: USB hub found
[ 1.441781] hub 2-0:1.0: 6 ports detected
[ 1.441957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.442105] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.442247] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.442378] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.442380] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.442539] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.442778] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.442925] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.443052] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.443272] usb usb3: Product: UHCI Host Controller
[ 1.443396] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.443522] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.443714] hub 3-0:1.0: USB hub found
[ 1.443839] hub 3-0:1.0: 2 ports detected
[ 1.443994] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.444124] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.444126] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.444284] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.444527] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.444671] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.444799] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.445021] usb usb4: Product: UHCI Host Controller
[ 1.445145] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.445271] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.445460] hub 4-0:1.0: USB hub found
[ 1.445584] hub 4-0:1.0: 2 ports detected
[ 1.445735] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.445865] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.445867] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.446027] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.446271] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.446415] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.446542] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.446761] usb usb5: Product: UHCI Host Controller
[ 1.446885] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.447014] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.447205] hub 5-0:1.0: USB hub found
[ 1.447329] hub 5-0:1.0: 2 ports detected
[ 1.447480] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.447610] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.447612] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.447769] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.448010] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.448153] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.448281] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.448500] usb usb6: Product: UHCI Host Controller
[ 1.448624] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.448750] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.448941] hub 6-0:1.0: USB hub found
[ 1.449065] hub 6-0:1.0: 2 ports detected
[ 1.449216] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.449346] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.449348] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.449506] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.449746] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.449889] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.450019] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.450239] usb usb7: Product: UHCI Host Controller
[ 1.450363] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.450489] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.450679] hub 7-0:1.0: USB hub found
[ 1.450803] hub 7-0:1.0: 2 ports detected
[ 1.450955] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.451085] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.451087] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.451246] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.451484] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.451628] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.451755] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.451977] usb usb8: Product: UHCI Host Controller
[ 1.452101] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.452227] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.452417] hub 8-0:1.0: USB hub found
[ 1.452541] hub 8-0:1.0: 2 ports detected
[ 1.452709] Initializing USB Mass Storage driver...
[ 1.452871] usbcore: registered new interface driver usb-storage
[ 1.453000] USB Mass Storage support registered.
[ 1.453161] usbcore: registered new interface driver libusual
[ 1.453338] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.455121] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.455249] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.455425] mice: PS/2 mouse device common for all mice
[ 1.455655] i2c /dev entries driver
[ 1.455819] md: raid0 personality registered for level 0
[ 1.455945] md: raid1 personality registered for level 1
[ 1.456161] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.456385] cpuidle: using governor ladder
[ 1.456508] cpuidle: using governor menu
[ 1.456755] usbcore: registered new interface driver hiddev
[ 1.456904] usbcore: registered new interface driver usbhid
[ 1.457031] usbhid: USB HID core driver
[ 1.457310] TCP cubic registered
[ 1.457433] NET: Registered protocol family 17
[ 1.457956] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.473141] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.710044] ata2: XXX SControl after resume = 300 300, tries=1
[ 1.711041] ata1: XXX SControl after resume = 300 300, tries=1
[ 1.712041] ata3.00: XXX SControl after resume = 300 300, tries=1
[ 1.712179] ata4.00: XXX SControl after resume = 300 300, tries=1
[ 1.714034] ata6: XXX SControl after resume = 300 300, tries=1
[ 1.715030] ata5: XXX SControl after resume = 300 300, tries=1
[ 1.811802] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.812800] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.813787] ata4.01: hard resetting link
[ 1.813927] ata3.01: hard resetting link
[ 1.822759] ata2: EH complete
[ 1.823755] ata1: EH complete
[ 1.966432] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.967429] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.969668] ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 1.969805] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.970655] ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 1.970791] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.975848] ata5.00: configured for UDMA/133
[ 1.975992] ata5: EH complete
[ 1.976132] ata6.00: configured for UDMA/133
[ 1.978874] ata6: EH complete
[ 2.042204] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.117016] ata3.01: XXX SControl after resume = 300 300, tries=1
[ 2.117154] ata4.01: XXX SControl after resume = 300 300, tries=1
[ 2.203898] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.204034] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.204163] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
[ 2.204290] usb 3-2: Manufacturer: American Power Conversion
[ 2.204416] usb 3-2: SerialNumber: 3B1007X44377
[ 2.287784] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
[ 2.369442] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.369458] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.369470] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.369843] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.375542] ata3.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
[ 2.375851] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.375987] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.376404] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.376540] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.376851] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.376986] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.381489] ata3.00: configured for UDMA/100
[ 2.381949] ata4.00: configured for UDMA/133
[ 2.385446] ata3.01: configured for UDMA/133
[ 2.387632] ata4.01: configured for UDMA/133
[ 2.387763] ata4: EH complete
[ 2.387973] ata3: EH complete
[ 2.389383] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
[ 2.394303] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.394535] Uniform CD-ROM driver Revision: 3.20
[ 2.394731] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.394786] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.394980] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.395311] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.395337] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.395402] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.395510] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.395526] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.395542] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.395544] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.395555] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.395607] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.395633] sdb:
[ 2.395742] sd 3:0:1:0: Attached scsi generic sg3 type 0
[ 2.395813] scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.395901] sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.395932] sd 4:0:0:0: [sdd] Write Protect is off
[ 2.395934] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.395936] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 2.395947] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.396000] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.396020] sdd:
[ 2.396120] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.396129] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 2.396164] sd 5:0:0:0: [sde] Write Protect is off
[ 2.396165] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.396176] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.396238] sde:
[ 2.399029] sd 2:0:1:0: [sda] Write Protect is off
[ 2.399271] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.399282] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.399571] sda:
[ 2.399874] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.400242] sd 3:0:1:0: [sdc] Write Protect is off
[ 2.400369] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.400381] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.400553] sdb1 sdb2 sdb3 sdb4 < sde1
[ 2.404550] sd 5:0:0:0: [sde] Attached SCSI disk
[ 2.405705] sdd1
[ 2.405983] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 2.409725] sdb5 sda1 sda2 sda3 sda4 < sdb6 >
[ 2.426544] sda5 sda6 >
[ 2.441651] sdc:
[ 2.452202] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.457789] sdc1 sdc2 sdc3
[ 2.457874] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.458125] sdc4 < sdc5 sdc6 >
[ 2.493067] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.495885] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 2.662403] usb 8-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.662539] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.662671] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.662799] usb 8-2: Manufacturer: Microsoft
[ 2.680495] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.680793] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 4.576512] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.583997] md: Waiting for all devices to be available before autodetect
[ 4.584133] md: If you don't use raid, use raid=noautodetect
[ 4.584332] md: Autodetecting RAID arrays.
[ 4.636329] md: Scanned 6 and added 6 devices.
[ 4.636460] md: autorun ...
[ 4.636581] md: considering sdc5 ...
[ 4.636708] md: adding sdc5 ...
[ 4.636831] md: sdc3 has different UUID to sdc5
[ 4.636956] md: adding sda5 ...
[ 4.637079] md: sda3 has different UUID to sdc5
[ 4.637204] md: adding sdb5 ...
[ 4.637327] md: sdb3 has different UUID to sdc5
[ 4.637522] md: created md5
[ 4.637647] md: bind<sdb5>
[ 4.637772] md: bind<sda5>
[ 4.637896] md: bind<sdc5>
[ 4.638020] md: running: <sdc5><sda5><sdb5>
[ 4.638311] raid1: raid set md5 active with 3 out of 3 mirrors
[ 4.638448] md5: detected capacity change from 0 to 53694496768
[ 4.638592] md: considering sdc3 ...
[ 4.638719] md: adding sdc3 ...
[ 4.638842] md: adding sda3 ...
[ 4.638965] md: adding sdb3 ...
[ 4.639158] md: created md3
[ 4.639280] md: bind<sdb3>
[ 4.639404] md: bind<sda3>
[ 4.639529] md: bind<sdc3>
[ 4.639655] md: running: <sdc3><sda3><sdb3>
[ 4.639939] raid1: raid set md3 active with 3 out of 3 mirrors
[ 4.640076] md3: detected capacity change from 0 to 53694562304
[ 4.640219] md: ... autorun DONE.
[ 4.640373] md5: unknown partition table
[ 4.683014] kjournald starting. Commit interval 5 seconds
[ 4.683020] EXT3-fs (md5): mounted filesystem with writeback data mode
[ 4.683030] VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
[ 4.683406] Freeing unused kernel memory: 476k freed
[ 4.683589] Write protecting the kernel read-only data: 6144k
[ 4.683798] Freeing unused kernel memory: 448k freed
[ 4.683994] Freeing unused kernel memory: 248k freed
[ 6.620208] udev: starting version 149
[ 6.737067] rtc_cmos 00:03: RTC can wake from S4
[ 6.737099] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.737122] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.748316] md3: unknown partition table
[ 6.762314] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.762318] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [mem 0x00000400-0x0000040f window disabled]
[ 6.762320] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.827518] sky2: driver version 1.27
[ 6.827536] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.827545] sky2 0000:06:00.0: setting latency timer to 64
[ 6.827572] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.827653] sky2 0000:06:00.0: irq 55 for MSI/MSI-X
[ 6.827821] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
[ 6.827833] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.827839] sky2 0000:04:00.0: setting latency timer to 64
[ 6.827855] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.827935] sky2 0000:04:00.0: irq 56 for MSI/MSI-X
[ 6.828089] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
[ 7.130906] Linux agpgart interface v0.103
[ 7.151994] [drm] Initialized drm 1.1.0 20060810
[ 7.244263] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.244319] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 7.244340] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.386536] [drm] radeon defaulting to kernel modesetting.
[ 7.386538] [drm] radeon kernel modesetting enabled.
[ 7.386573] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 7.386576] radeon 0000:03:00.0: setting latency timer to 64
[ 7.387289] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[ 7.387442] [drm] register mmio base: 0xFBAC0000
[ 7.387443] [drm] register mmio size: 131072
[ 7.387510] ATOM BIOS: JUNIPER
[ 7.387519] [drm] Clocks initialized !
[ 7.387520] [drm] 1 Power State(s)
[ 7.387521] [drm] State 0 Default (default)
[ 7.387522] [drm] 16 PCIE Lanes
[ 7.387522] [drm] 1 Clock Mode(s)
[ 7.387523] [drm] 0 engine/memory: 850000/1200000
[ 7.387527] [drm] radeon: power management initialized
[ 7.387533] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 7.387534] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 7.387545] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 7.387546] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.387547] [drm] RAM width 128bits DDR
[ 7.387570] [TTM] Zone kernel: Available graphics memory: 6151634 kiB.
[ 7.387571] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 7.387578] [drm] radeon: 256M of VRAM memory ready
[ 7.387579] [drm] radeon: 512M of GTT memory ready.
[ 7.388921] [drm] Radeon Display Connectors
[ 7.388922] [drm] Connector 0:
[ 7.388924] [drm] DisplayPort
[ 7.388925] [drm] HPD4
[ 7.388927] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 7.388928] [drm] Encoders:
[ 7.388929] [drm] DFP1: INTERNAL_UNIPHY2
[ 7.388931] [drm] Connector 1:
[ 7.388932] [drm] HDMI-A
[ 7.388933] [drm] HPD5
[ 7.388935] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 7.388936] [drm] Encoders:
[ 7.388938] [drm] DFP2: INTERNAL_UNIPHY2
[ 7.388939] [drm] Connector 2:
[ 7.388940] [drm] DVI-I
[ 7.388941] [drm] HPD1
[ 7.388943] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 7.388945] [drm] Encoders:
[ 7.388946] [drm] DFP3: INTERNAL_UNIPHY1
[ 7.388947] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.388949] [drm] Connector 3:
[ 7.388950] [drm] DVI-I
[ 7.388951] [drm] HPD6
[ 7.388953] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 7.388955] [drm] Encoders:
[ 7.388957] [drm] DFP4: INTERNAL_UNIPHY
[ 7.388958] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.740540] hda_codec: AD1989B: BIOS auto-probing.
[ 7.771573] [drm] fb mappable at 0xD0040000
[ 7.771575] [drm] vram apper at 0xD0000000
[ 7.771576] [drm] size 8294400
[ 7.771577] [drm] fb depth is 24
[ 7.771577] [drm] pitch is 7680
[ 7.780457] Console: switching to colour frame buffer device 240x67
[ 7.784484] fb0: radeondrmfb frame buffer device
[ 7.784485] registered panic notifier
[ 7.784488] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
[ 7.784511] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 7.784550] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
[ 7.784567] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 8.246619] EXT3-fs (md5): using internal journal
[ 8.476081] md: md11 stopped.
[ 8.494699] md: bind<sde1>
[ 8.494868] md: bind<sdd1>
[ 8.495348] raid0: looking at sdd1
[ 8.495349] raid0: comparing sdd1(104871936)
[ 8.495350] with sdd1(104871936)
[ 8.495351] raid0: END
[ 8.495352] raid0: ==> UNIQUE
[ 8.495352] raid0: 1 zones
[ 8.495353] raid0: looking at sde1
[ 8.495354] raid0: comparing sde1(104871936)
[ 8.495355] with sdd1(104871936)
[ 8.495356] raid0: EQUAL
[ 8.495357] raid0: FINAL 1 zones
[ 8.495358] raid0: done.
[ 8.495359] raid0 : md_size is 209743872 sectors.
[ 8.495360] ******* md11 configuration *********
[ 8.495361] zone0=[sdd1/sde1/]
[ 8.495363] zone offset=0kb device offset=0kb size=104871936kb
[ 8.495364] **********************************
[ 8.495364]
[ 8.495368] md11: detected capacity change from 0 to 107388862464
[ 8.495858] md11: unknown partition table
[ 8.501042] md: md6 stopped.
[ 8.505155] md: bind<sdb6>
[ 8.505344] md: bind<sdc6>
[ 8.505511] md: bind<sda6>
[ 8.505987] raid1: raid set md6 active with 3 out of 3 mirrors
[ 8.505999] md6: detected capacity change from 0 to 253354939392
[ 8.506471] md6: unknown partition table
[ 8.949405] kjournald starting. Commit interval 5 seconds
[ 8.949410] EXT3-fs (md11): warning: maximal mount count reached, running e2fsck is recommended
[ 8.949667] EXT3-fs (md11): using internal journal
[ 8.949672] EXT3-fs (md11): mounted filesystem with writeback data mode
[ 8.976911] kjournald starting. Commit interval 5 seconds
[ 8.976916] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 8.999088] EXT3-fs (md6): using internal journal
[ 8.999093] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 9.056684] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 9.057970] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 9.059269] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 14.996222] sky2 0000:06:00.0: eth0: enabling interface
[ 16.814959] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 21.819937] NET: Registered protocol family 10
[ 24.106178] /dev/vmmon[4195]: Module vmmon: registered with major=10 minor=165
[ 24.106186] /dev/vmmon[4195]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 24.106191] /dev/vmmon[4195]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 24.106193] /dev/vmmon[4195]: Module vmmon: initialized
[ 24.162194] /dev/vmci[4214]: VMCI: Driver initialized.
[ 24.162209] /dev/vmci[4214]: Module vmci: registered with major=10 minor=59
[ 24.162211] /dev/vmci[4214]: Module vmci: initialized
[ 24.419139] /dev/vmnet: open called by PID 4296 (vmnet-bridge)
[ 24.419146] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 24.419165] /dev/vmnet: port on hub 0 successfully opened
[ 24.419174] bridge-eth0: up
[ 24.419177] bridge-eth0: attached
[ 25.633933] /dev/vmnet: open called by PID 4303 (vmnet-dhcpd)
[ 25.633938] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 25.633956] /dev/vmnet: port on hub 1 successfully opened
[ 25.685920] /dev/vmnet: open called by PID 4305 (vmnet-netifup)
[ 25.685925] /dev/vmnet: port on hub 1 successfully opened
[ 25.727758] /dev/vmnet: open called by PID 4308 (vmnet-dhcpd)
[ 25.727763] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 25.727782] /dev/vmnet: port on hub 8 successfully opened
[ 25.813959] /dev/vmnet: open called by PID 4312 (vmnet-natd)
[ 25.813964] /dev/vmnet: port on hub 8 successfully opened
[ 25.819176] /dev/vmnet: open called by PID 4313 (vmnet-netifup)
[ 25.819182] /dev/vmnet: port on hub 8 successfully opened
[ 32.108936] eth0: no IPv6 routers present
[ 35.893293] vmnet8: no IPv6 routers present
[ 36.018943] vmnet1: no IPv6 routers present
[-- Attachment #3: dmesg.Patch-R1.Test4 --]
[-- Type: application/octet-stream, Size: 63672 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #6 SMP PREEMPT Wed Jul 7 09:27:12 PDT 2010
[ 0.000000] Command line: root=/dev/md5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 1G
[ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000
[ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143439
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 12
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] early_res array is doubled to 64 at [14000 - 147ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
[ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
[ 0.000000] Kernel command line: root=/dev/md5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] early_res array is doubled to 128 at [14800 - 157ff]
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (60 early reservations)
[ 0.000000] #1 [0001000000 - 0001771144] TEXT DATA BSS
[ 0.000000] #2 [0001772000 - 0001772298] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved
[ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM
[ 0.000000] #11 [0001771180 - 0001771780] BOOTMEM
[ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM
[ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM
[ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0
[ 0.000000] #15 [0001771780 - 0001771900] BOOTMEM
[ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM
[ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM
[ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM
[ 0.000000] #19 [0001771900 - 0001771941] BOOTMEM
[ 0.000000] #20 [0001771980 - 0001771a06] BOOTMEM
[ 0.000000] #21 [0001771a40 - 0001771ca8] BOOTMEM
[ 0.000000] #22 [0001771cc0 - 0001771d28] BOOTMEM
[ 0.000000] #23 [0001771d40 - 0001771da8] BOOTMEM
[ 0.000000] #24 [0001771dc0 - 0001771e28] BOOTMEM
[ 0.000000] #25 [0001771e40 - 0001771ea8] BOOTMEM
[ 0.000000] #26 [0001771ec0 - 0001771f28] BOOTMEM
[ 0.000000] #27 [0001771f40 - 0001771fa8] BOOTMEM
[ 0.000000] #28 [00017a32c0 - 00017a3328] BOOTMEM
[ 0.000000] #29 [00017a3340 - 00017a33a8] BOOTMEM
[ 0.000000] #30 [00017a33c0 - 00017a3428] BOOTMEM
[ 0.000000] #31 [00017a3440 - 00017a34a8] BOOTMEM
[ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM
[ 0.000000] #33 [00017a34c0 - 00017a34ce] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM
[ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM
[ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM
[ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM
[ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM
[ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM
[ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM
[ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM
[ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM
[ 0.000000] #46 [00017a3500 - 00017a3508] BOOTMEM
[ 0.000000] #47 [00017a3540 - 00017a3548] BOOTMEM
[ 0.000000] #48 [00017a3580 - 00017a35b0] BOOTMEM
[ 0.000000] #49 [00017a35c0 - 00017a3620] BOOTMEM
[ 0.000000] #50 [00017a3640 - 00017a3750] BOOTMEM
[ 0.000000] #51 [00017a3780 - 00017a37c8] BOOTMEM
[ 0.000000] #52 [00017a3800 - 00017a3848] BOOTMEM
[ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM
[ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM
[ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM
[ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM
[ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM
[ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM
[ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 12302060k/13631488k available (3630k kernel code, 1057732k absent, 271696k reserved, 2958k data, 476k init)
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3337.699 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6675.39 BogoMIPS (lpj=3337699)
[ 0.000293] Security Framework initialized
[ 0.000432] Mount-cache hash table entries: 256
[ 0.000637] CPU: Physical Processor ID: 0
[ 0.000762] CPU: Processor Core ID: 0
[ 0.000888] mce: CPU supports 9 MCE banks
[ 0.001023] CPU0: Thermal monitoring enabled (TM1)
[ 0.001156] using mwait in idle threads.
[ 0.001288] Performance Events: Westmere events, Intel PMU driver.
[ 0.001468] ... version: 3
[ 0.001593] ... bit width: 48
[ 0.001717] ... generic registers: 4
[ 0.001841] ... value mask: 0000ffffffffffff
[ 0.001968] ... max period: 000000007fffffff
[ 0.002095] ... fixed-purpose events: 3
[ 0.002226] ... event mask: 000000070000000f
[ 0.002373] Freeing SMP alternatives: 36k freed
[ 0.002504] ACPI: Core revision 20100121
[ 0.041818] Setting APIC routing to physical flat
[ 0.042385] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052488] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
[ 0.159798] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
[ 1.200000] Brought up 12 CPUs
[ 1.200124] Total of 12 processors activated (81756.81 BogoMIPS).
[ 1.206637] NET: Registered protocol family 16
[ 1.209542] ACPI: bus type pci registered
[ 1.209724] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.209951] PCI: not using MMCONFIG
[ 1.210074] PCI: Using configuration type 1 for base access
[ 1.212130] bio: create slab <bio-0> at 0
[ 1.213467] ACPI: EC: Look up EC in DSDT
[ 1.214572] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.299165] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.299990] ACPI: Interpreter enabled
[ 1.300113] ACPI: (supports S0 S5)
[ 1.300290] ACPI: Using IOAPIC for interrupt routing
[ 1.300454] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.302250] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.327130] ACPI: No dock devices found.
[ 1.327255] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.327584] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.327930] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.328058] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.328186] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.328407] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.328629] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.328852] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.329115] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.329118] pci 0000:00:00.0: PME# disabled
[ 1.329160] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.329162] pci 0000:00:01.0: PME# disabled
[ 1.329204] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.329206] pci 0000:00:03.0: PME# disabled
[ 1.329249] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.329252] pci 0000:00:07.0: PME# disabled
[ 1.329420] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
[ 1.329472] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
[ 1.329525] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
[ 1.329577] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 1.329623] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.329626] pci 0000:00:1a.7: PME# disabled
[ 1.329653] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 1.329689] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.329691] pci 0000:00:1b.0: PME# disabled
[ 1.329742] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.329745] pci 0000:00:1c.0: PME# disabled
[ 1.329798] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.329800] pci 0000:00:1c.2: PME# disabled
[ 1.329853] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.329856] pci 0000:00:1c.4: PME# disabled
[ 1.329908] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.329911] pci 0000:00:1c.5: PME# disabled
[ 1.329950] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
[ 1.330002] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
[ 1.330055] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
[ 1.330107] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 1.330152] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.330155] pci 0000:00:1d.7: PME# disabled
[ 1.330250] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 1.330473] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.330603] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.330865] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
[ 1.330869] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
[ 1.330873] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
[ 1.330877] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
[ 1.330881] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
[ 1.330885] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
[ 1.330921] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 1.330932] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.330961] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
[ 1.330965] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
[ 1.330969] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
[ 1.330973] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
[ 1.330977] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
[ 1.330982] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
[ 1.331031] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.331158] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.331161] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.331164] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.331191] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.331317] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.331319] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.331323] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.331364] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.331370] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[ 1.331374] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
[ 1.331381] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[ 1.331395] pci 0000:03:00.0: supports D1 D2
[ 1.331416] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[ 1.331443] pci 0000:03:00.1: supports D1 D2
[ 1.331454] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.331581] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.331583] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.331587] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.331619] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.331748] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.331750] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.331755] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.331820] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.331826] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.331849] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.331884] pci 0000:06:00.0: supports D1 D2
[ 1.331885] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.331889] pci 0000:06:00.0: PME# disabled
[ 1.331898] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.332025] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.332027] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.332032] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332129] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 1.332163] pci 0000:05:00.0: PME# supported from D3hot
[ 1.332167] pci 0000:05:00.0: PME# disabled
[ 1.332206] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.332213] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
[ 1.332221] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
[ 1.332228] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.332235] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.332288] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.332415] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.332417] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.332422] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332486] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 1.332493] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.332516] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 1.332551] pci 0000:04:00.0: supports D1 D2
[ 1.332552] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.332556] pci 0000:04:00.0: PME# disabled
[ 1.332566] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.332694] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.332697] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.332701] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332740] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 1.332745] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
[ 1.332782] pci 0000:08:02.0: supports D2
[ 1.332783] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 1.332786] pci 0000:08:02.0: PME# disabled
[ 1.332822] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.332951] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.332954] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.332958] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.332960] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.332961] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.332963] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.332964] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.332966] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.332967] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.332991] pci_bus 0000:00: on NUMA node 0
[ 1.332994] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.333224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.333298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.333343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.333387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.333439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.333481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.333524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.333568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.353962] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.354447] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.354735] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.355217] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.355703] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.356185] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.356671] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.357153] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.357731] SCSI subsystem initialized
[ 1.357962] libata version 3.00 loaded.
[ 1.358047] usbcore: registered new interface driver usbfs
[ 1.358191] usbcore: registered new interface driver hub
[ 1.358339] usbcore: registered new device driver usb
[ 1.358579] PCI: Using ACPI for IRQ routing
[ 1.358706] PCI: pci_cache_line_size set to 64 bytes
[ 1.358789] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.358791] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.358860] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.359110] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.361249] Switching to clocksource tsc
[ 1.361744] pnp: PnP ACPI init
[ 1.361870] ACPI: bus type pnp registered
[ 1.364407] pnp: PnP ACPI: found 17 devices
[ 1.364531] ACPI: ACPI bus type pnp unregistered
[ 1.364665] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.364792] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.364919] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.365046] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.365174] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.365302] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.365432] system 00:07: [io 0x0290-0x029f] has been reserved
[ 1.365562] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.365689] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.365815] system 00:08: [io 0x0500-0x057f] could not be reserved
[ 1.365942] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.366069] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.366196] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.366325] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.366455] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.366585] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.366714] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.366843] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.366971] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.367098] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.367226] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.367354] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.372074] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.372202] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.372423] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.372646] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.372867] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.372994] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.373118] pci 0000:00:01.0: bridge window [io disabled]
[ 1.373245] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.373372] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.373500] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.373627] pci 0000:00:03.0: bridge window [io disabled]
[ 1.373754] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.373880] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.374009] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.374134] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.374262] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.374390] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.374615] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.374741] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.374869] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.374998] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.375221] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.375347] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.375475] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.375606] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.375829] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.375955] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.376083] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.376212] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.376435] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.376563] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.376691] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.376820] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.377043] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.377169] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.377297] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.377425] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.377562] pci 0000:00:01.0: setting latency timer to 64
[ 1.377567] pci 0000:00:03.0: setting latency timer to 64
[ 1.377572] pci 0000:00:07.0: setting latency timer to 64
[ 1.377578] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.377707] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.377835] pci 0000:00:1c.0: setting latency timer to 64
[ 1.377842] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.377970] pci 0000:00:1c.2: setting latency timer to 64
[ 1.377976] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.378104] pci 0000:00:1c.4: setting latency timer to 64
[ 1.378111] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.378239] pci 0000:00:1c.5: setting latency timer to 64
[ 1.378243] pci 0000:00:1e.0: setting latency timer to 64
[ 1.378246] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.378247] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.378248] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.378250] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.378251] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.378252] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.378254] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 1.378255] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.378256] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.378257] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.378259] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.378260] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.378261] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.378262] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.378264] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.378265] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.378266] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.378268] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.378269] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.378270] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.378272] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.378273] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 1.378274] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.378275] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.378277] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.378278] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.378279] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.378280] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.378281] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.378322] NET: Registered protocol family 2
[ 1.378496] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.379171] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.379850] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.380082] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.380209] TCP reno registered
[ 1.380332] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.380492] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.380738] NET: Registered protocol family 1
[ 1.381004] RPC: Registered udp transport module.
[ 1.381128] RPC: Registered tcp transport module.
[ 1.381253] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.381519] pci 0000:03:00.0: Boot video device
[ 1.381532] PCI: CLS 256 bytes, default 64
[ 1.381558] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.381685] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
[ 1.381906] software IO TLB at phys 0xe000000 - 0x12000000
[ 1.384120] VFS: Disk quotas dquot_6.5.2
[ 1.384263] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.384653] NTFS driver 2.1.29 [Flags: R/W].
[ 1.384814] fuse init (API version 7.13)
[ 1.384986] msgmni has been set to 24027
[ 1.385328] alg: No test for stdrng (krng)
[ 1.385481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.385705] io scheduler noop registered
[ 1.385827] io scheduler deadline registered
[ 1.385966] io scheduler cfq registered (default)
[ 1.386153] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.386177] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.386239] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.386261] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.386320] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.386342] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.386403] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.386430] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.386516] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.386544] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.386626] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.386654] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.386734] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.386761] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.386858] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.386862] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.386865] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.388288] Non-volatile memory driver v1.3
[ 1.388510] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.388736] ACPI: Power Button [PWRB]
[ 1.388893] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.389114] ACPI: Power Button [PWRF]
[ 1.389761] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.391032] brd: module loaded
[ 1.391580] loop: module loaded
[ 1.391860] ahci 0000:05:00.0: version 3.0
[ 1.391872] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.402409] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.402640] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.402771] ahci 0000:05:00.0: setting latency timer to 64
[ 1.402852] scsi0 : ahci
[ 1.403049] scsi1 : ahci
[ 1.405870] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.406092] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.406330] ata1: hard resetting link
[ 1.406338] ata2: hard resetting link
[ 1.406354] ata_piix 0000:00:1f.2: version 2.13
[ 1.406363] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.406366] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.406387] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.406418] scsi2 : ata_piix
[ 1.406479] scsi3 : ata_piix
[ 1.407739] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[ 1.407870] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[ 1.408012] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.408026] ata3.00: hard resetting link
[ 1.408039] ata4.00: hard resetting link
[ 1.408386] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.408655] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.408676] scsi4 : ata_piix
[ 1.408857] scsi5 : ata_piix
[ 1.410049] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[ 1.410179] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[ 1.410332] ata5: hard resetting link
[ 1.410345] ata6: hard resetting link
[ 1.410580] console [netcon0] enabled
[ 1.410703] netconsole: network logging started
[ 1.410886] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.411024] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.411159] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.411161] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.411325] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.411565] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.415552] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.415561] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.424326] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.424471] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.424600] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.424820] usb usb1: Product: EHCI Host Controller
[ 1.424944] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.425071] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.425267] hub 1-0:1.0: USB hub found
[ 1.425392] hub 1-0:1.0: 6 ports detected
[ 1.425556] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.425691] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.425694] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.425850] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.426086] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.430068] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.430077] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.439288] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.439429] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.439559] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.439778] usb usb2: Product: EHCI Host Controller
[ 1.439902] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd
[ 1.440029] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.440221] hub 2-0:1.0: USB hub found
[ 1.440345] hub 2-0:1.0: 6 ports detected
[ 1.440521] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.440670] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.440813] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.440943] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.440945] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.441106] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.441345] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.441492] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.441619] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.441839] usb usb3: Product: UHCI Host Controller
[ 1.441963] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.442089] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.442282] hub 3-0:1.0: USB hub found
[ 1.442406] hub 3-0:1.0: 2 ports detected
[ 1.442560] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.442691] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.442693] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.442851] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.443094] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.443238] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.443366] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.443588] usb usb4: Product: UHCI Host Controller
[ 1.443713] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.443839] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.444029] hub 4-0:1.0: USB hub found
[ 1.444154] hub 4-0:1.0: 2 ports detected
[ 1.444305] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.444435] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.444437] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.444598] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.444842] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.444985] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.445113] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.445332] usb usb5: Product: UHCI Host Controller
[ 1.445456] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.445585] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.445777] hub 5-0:1.0: USB hub found
[ 1.445901] hub 5-0:1.0: 2 ports detected
[ 1.446052] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.446182] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.446184] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.446341] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.446582] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.446726] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.446853] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.447073] usb usb6: Product: UHCI Host Controller
[ 1.447197] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.447323] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.447517] hub 6-0:1.0: USB hub found
[ 1.447641] hub 6-0:1.0: 2 ports detected
[ 1.447792] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.447923] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.447925] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.448083] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.448323] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.448469] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.448597] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.448816] usb usb7: Product: UHCI Host Controller
[ 1.448940] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.449067] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.449258] hub 7-0:1.0: USB hub found
[ 1.449383] hub 7-0:1.0: 2 ports detected
[ 1.449535] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.449665] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.449667] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.449826] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.450064] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.450208] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.450335] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.450558] usb usb8: Product: UHCI Host Controller
[ 1.450682] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd
[ 1.450808] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.450998] hub 8-0:1.0: USB hub found
[ 1.451122] hub 8-0:1.0: 2 ports detected
[ 1.451290] Initializing USB Mass Storage driver...
[ 1.451452] usbcore: registered new interface driver usb-storage
[ 1.451581] USB Mass Storage support registered.
[ 1.451742] usbcore: registered new interface driver libusual
[ 1.451920] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.453763] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.453891] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.454066] mice: PS/2 mouse device common for all mice
[ 1.454299] i2c /dev entries driver
[ 1.454460] md: raid0 personality registered for level 0
[ 1.454586] md: raid1 personality registered for level 1
[ 1.454800] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.455024] cpuidle: using governor ladder
[ 1.455147] cpuidle: using governor menu
[ 1.455392] usbcore: registered new interface driver hiddev
[ 1.455543] usbcore: registered new interface driver usbhid
[ 1.455669] usbhid: USB HID core driver
[ 1.455948] TCP cubic registered
[ 1.456070] NET: Registered protocol family 17
[ 1.456590] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.471783] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.708593] ata2: XXX SControl after resume = 300 300, tries=1
[ 1.709583] ata1: XXX SControl after resume = 300 300, tries=1
[ 1.710589] ata3.00: XXX SControl after resume = 300 300, tries=1
[ 1.710727] ata4.00: XXX SControl after resume = 300 300, tries=1
[ 1.713570] ata5: XXX SControl after resume = 300 300, tries=1
[ 1.810336] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.811332] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.812318] ata3.01: hard resetting link
[ 1.812458] ata4.01: hard resetting link
[ 1.821290] ata2: EH complete
[ 1.822286] ata1: EH complete
[ 1.914055] ata6: XXX SControl after resume = 300 300, tries=2
[ 1.914190] ata6: link resume succeeded after 1 retries
[ 1.965960] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.969190] ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 1.969326] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.975592] ata5.00: configured for UDMA/133
[ 1.975722] ata5: EH complete
[ 2.044711] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.115531] ata3.01: XXX SControl after resume = 300 300, tries=1
[ 2.115668] ata4.01: XXX SControl after resume = 300 300, tries=1
[ 2.166424] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.169654] ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.169790] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.175998] ata6.00: configured for UDMA/133
[ 2.176129] ata6: EH complete
[ 2.205459] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.205594] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.205723] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
[ 2.205850] usb 3-2: Manufacturer: American Power Conversion
[ 2.205976] usb 3-2: SerialNumber: 3B1007X44377
[ 2.289348] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
[ 2.367927] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.368069] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.369909] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.370051] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.374090] ata3.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
[ 2.374385] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.374536] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.374540] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.374541] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.375100] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.375236] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.378143] ata4.00: configured for UDMA/133
[ 2.379971] ata3.00: configured for UDMA/100
[ 2.384491] ata4.01: configured for UDMA/133
[ 2.384622] ata4: EH complete
[ 2.386122] ata3.01: configured for UDMA/133
[ 2.386791] ata3: EH complete
[ 2.399055] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
[ 2.403961] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.404192] Uniform CD-ROM driver Revision: 3.20
[ 2.404388] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.404443] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.404637] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.404978] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.405214] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.405235] sd 2:0:1:0: [sda] Write Protect is off
[ 2.405237] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.405247] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.405316] sda:
[ 2.405781] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.406225] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.406475] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.406602] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.406740] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.406757] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.406794] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.406902] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.406927] sd 3:0:1:0: [sdc] Write Protect is off
[ 2.406928] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.406936] sd 3:0:1:0: Attached scsi generic sg3 type 0
[ 2.406939] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.407001] scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.407008] sdc:
[ 2.407134] sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.407149] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 2.407166] sd 4:0:0:0: [sdd] Write Protect is off
[ 2.407167] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.407184] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.407240] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.407330] sdd:
[ 2.407412] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.407415] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 2.407437] sd 5:0:0:0: [sde] Write Protect is off
[ 2.407438] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.407449] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.407510] sde: sde1
[ 2.415404] sd 5:0:0:0: [sde] Attached SCSI disk
[ 2.415728] sda1 sda2 sda3 sda4 < sdd1
[ 2.419852] sdc1 sdc2 sdc3 sdc4 <
[ 2.420165] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 2.421443] sda5 sdc5 sda6 >
[ 2.442487] sdc6 >
[ 2.447093] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.457723] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6
[ 2.488577] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 2.488825] >
[ 2.494535] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.505948] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.663975] usb 8-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.664114] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.664243] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.664370] usb 8-2: Manufacturer: Microsoft
[ 2.682071] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.682367] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 4.573727] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.581223] md: Waiting for all devices to be available before autodetect
[ 4.581360] md: If you don't use raid, use raid=noautodetect
[ 4.581566] md: Autodetecting RAID arrays.
[ 4.645105] md: Scanned 6 and added 6 devices.
[ 4.645236] md: autorun ...
[ 4.645358] md: considering sdb5 ...
[ 4.645482] md: adding sdb5 ...
[ 4.645605] md: sdb3 has different UUID to sdb5
[ 4.645730] md: adding sdc5 ...
[ 4.645853] md: sdc3 has different UUID to sdb5
[ 4.645981] md: adding sda5 ...
[ 4.646104] md: sda3 has different UUID to sdb5
[ 4.646304] md: created md5
[ 4.646426] md: bind<sda5>
[ 4.646551] md: bind<sdc5>
[ 4.646676] md: bind<sdb5>
[ 4.646800] md: running: <sdb5><sdc5><sda5>
[ 4.647092] raid1: raid set md5 active with 3 out of 3 mirrors
[ 4.647230] md5: detected capacity change from 0 to 53694496768
[ 4.647374] md: considering sdb3 ...
[ 4.647498] md: adding sdb3 ...
[ 4.647621] md: adding sdc3 ...
[ 4.647744] md: adding sda3 ...
[ 4.647939] md: created md3
[ 4.648061] md: bind<sda3>
[ 4.648185] md: bind<sdc3>
[ 4.648310] md: bind<sdb3>
[ 4.648434] md: running: <sdb3><sdc3><sda3>
[ 4.648717] raid1: raid set md3 active with 3 out of 3 mirrors
[ 4.648854] md3: detected capacity change from 0 to 53694562304
[ 4.649000] md: ... autorun DONE.
[ 4.649155] md5: unknown partition table
[ 4.694872] kjournald starting. Commit interval 5 seconds
[ 4.694878] EXT3-fs (md5): mounted filesystem with writeback data mode
[ 4.694889] VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
[ 4.695264] Freeing unused kernel memory: 476k freed
[ 4.695444] Write protecting the kernel read-only data: 6144k
[ 4.695651] Freeing unused kernel memory: 448k freed
[ 4.695851] Freeing unused kernel memory: 248k freed
[ 6.601946] udev: starting version 149
[ 6.698071] rtc_cmos 00:03: RTC can wake from S4
[ 6.698107] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.698132] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.712090] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.712093] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f 64bit pref window disabled]
[ 6.712095] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.770455] sky2: driver version 1.27
[ 6.770474] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.770483] sky2 0000:06:00.0: setting latency timer to 64
[ 6.770510] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.770593] sky2 0000:06:00.0: irq 55 for MSI/MSI-X
[ 6.770782] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
[ 6.770795] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.770802] sky2 0000:04:00.0: setting latency timer to 64
[ 6.770818] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.770899] sky2 0000:04:00.0: irq 56 for MSI/MSI-X
[ 6.771068] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
[ 6.778841] md3: unknown partition table
[ 6.981856] Linux agpgart interface v0.103
[ 7.021342] [drm] Initialized drm 1.1.0 20060810
[ 7.136889] [drm] radeon defaulting to kernel modesetting.
[ 7.136890] [drm] radeon kernel modesetting enabled.
[ 7.136925] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 7.136929] radeon 0000:03:00.0: setting latency timer to 64
[ 7.137632] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[ 7.137800] [drm] register mmio base: 0xFBAC0000
[ 7.137801] [drm] register mmio size: 131072
[ 7.137870] ATOM BIOS: JUNIPER
[ 7.137878] [drm] Clocks initialized !
[ 7.137879] [drm] 1 Power State(s)
[ 7.137880] [drm] State 0 Default (default)
[ 7.137881] [drm] 16 PCIE Lanes
[ 7.137882] [drm] 1 Clock Mode(s)
[ 7.137883] [drm] 0 engine/memory: 850000/1200000
[ 7.137887] [drm] radeon: power management initialized
[ 7.137892] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 7.137894] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 7.137904] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 7.137906] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.137907] [drm] RAM width 128bits DDR
[ 7.137929] [TTM] Zone kernel: Available graphics memory: 6151634 kiB.
[ 7.137931] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 7.137937] [drm] radeon: 256M of VRAM memory ready
[ 7.137938] [drm] radeon: 512M of GTT memory ready.
[ 7.139285] [drm] Radeon Display Connectors
[ 7.139287] [drm] Connector 0:
[ 7.139288] [drm] DisplayPort
[ 7.139289] [drm] HPD4
[ 7.139291] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 7.139293] [drm] Encoders:
[ 7.139294] [drm] DFP1: INTERNAL_UNIPHY2
[ 7.139296] [drm] Connector 1:
[ 7.139297] [drm] HDMI-A
[ 7.139298] [drm] HPD5
[ 7.139300] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 7.139301] [drm] Encoders:
[ 7.139303] [drm] DFP2: INTERNAL_UNIPHY2
[ 7.139304] [drm] Connector 2:
[ 7.139305] [drm] DVI-I
[ 7.139306] [drm] HPD1
[ 7.139308] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 7.139310] [drm] Encoders:
[ 7.139311] [drm] DFP3: INTERNAL_UNIPHY1
[ 7.139313] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.139314] [drm] Connector 3:
[ 7.139316] [drm] DVI-I
[ 7.139317] [drm] HPD6
[ 7.139319] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 7.139320] [drm] Encoders:
[ 7.139322] [drm] DFP4: INTERNAL_UNIPHY
[ 7.139323] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.319040] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.319094] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 7.319117] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.488206] [drm] fb mappable at 0xD0040000
[ 7.488207] [drm] vram apper at 0xD0000000
[ 7.488208] [drm] size 8294400
[ 7.488209] [drm] fb depth is 24
[ 7.488210] [drm] pitch is 7680
[ 7.496737] Console: switching to colour frame buffer device 240x67
[ 7.500730] fb0: radeondrmfb frame buffer device
[ 7.500732] registered panic notifier
[ 7.500734] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
[ 7.705846] hda_codec: AD1989B: BIOS auto-probing.
[ 7.708145] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 7.708188] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
[ 7.708206] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 8.294363] EXT3-fs (md5): using internal journal
[ 8.587733] md: md11 stopped.
[ 8.621244] md: bind<sde1>
[ 8.621416] md: bind<sdd1>
[ 8.621899] raid0: looking at sdd1
[ 8.621900] raid0: comparing sdd1(104871936)
[ 8.621901] with sdd1(104871936)
[ 8.621902] raid0: END
[ 8.621903] raid0: ==> UNIQUE
[ 8.621903] raid0: 1 zones
[ 8.621904] raid0: looking at sde1
[ 8.621905] raid0: comparing sde1(104871936)
[ 8.621906] with sdd1(104871936)
[ 8.621907] raid0: EQUAL
[ 8.621908] raid0: FINAL 1 zones
[ 8.621910] raid0: done.
[ 8.621910] raid0 : md_size is 209743872 sectors.
[ 8.621911] ******* md11 configuration *********
[ 8.621912] zone0=[sdd1/sde1/]
[ 8.621914] zone offset=0kb device offset=0kb size=104871936kb
[ 8.621915] **********************************
[ 8.621916]
[ 8.621919] md11: detected capacity change from 0 to 107388862464
[ 8.622378] md11: unknown partition table
[ 8.627435] md: md6 stopped.
[ 8.631193] md: bind<sdb6>
[ 8.631360] md: bind<sdc6>
[ 8.631516] md: bind<sda6>
[ 8.632027] raid1: raid set md6 active with 3 out of 3 mirrors
[ 8.632039] md6: detected capacity change from 0 to 253354939392
[ 8.632512] md6: unknown partition table
[ 9.129615] kjournald starting. Commit interval 5 seconds
[ 9.129620] EXT3-fs (md11): warning: maximal mount count reached, running e2fsck is recommended
[ 9.129880] EXT3-fs (md11): using internal journal
[ 9.129885] EXT3-fs (md11): mounted filesystem with writeback data mode
[ 9.155000] kjournald starting. Commit interval 5 seconds
[ 9.155008] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 9.179659] EXT3-fs (md6): using internal journal
[ 9.179664] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 9.233178] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 9.234595] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 9.235918] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 14.243983] sky2 0000:06:00.0: eth0: enabling interface
[ 16.078753] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 20.984070] NET: Registered protocol family 10
[ 23.250049] /dev/vmmon[4201]: Module vmmon: registered with major=10 minor=165
[ 23.250057] /dev/vmmon[4201]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 23.250063] /dev/vmmon[4201]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 23.250065] /dev/vmmon[4201]: Module vmmon: initialized
[ 23.296931] /dev/vmci[4220]: VMCI: Driver initialized.
[ 23.296953] /dev/vmci[4220]: Module vmci: registered with major=10 minor=59
[ 23.296955] /dev/vmci[4220]: Module vmci: initialized
[ 23.591919] /dev/vmnet: open called by PID 4302 (vmnet-bridge)
[ 23.591925] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 23.591944] /dev/vmnet: port on hub 0 successfully opened
[ 23.591953] bridge-eth0: up
[ 23.591956] bridge-eth0: attached
[ 24.787715] /dev/vmnet: open called by PID 4309 (vmnet-dhcpd)
[ 24.787719] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 24.787738] /dev/vmnet: port on hub 1 successfully opened
[ 24.836319] /dev/vmnet: open called by PID 4311 (vmnet-netifup)
[ 24.836324] /dev/vmnet: port on hub 1 successfully opened
[ 24.881238] /dev/vmnet: open called by PID 4314 (vmnet-dhcpd)
[ 24.881243] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 24.881262] /dev/vmnet: port on hub 8 successfully opened
[ 24.972959] /dev/vmnet: open called by PID 4318 (vmnet-natd)
[ 24.972964] /dev/vmnet: port on hub 8 successfully opened
[ 24.975764] /dev/vmnet: open called by PID 4319 (vmnet-netifup)
[ 24.975770] /dev/vmnet: port on hub 8 successfully opened
[ 31.694053] eth0: no IPv6 routers present
[ 35.225752] vmnet1: no IPv6 routers present
[ 35.599807] vmnet8: no IPv6 routers present
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-07 17:06 ` Mark Knecht
@ 2010-07-07 17:26 ` Tejun Heo
2010-07-07 17:32 ` Mark Knecht
2010-07-19 19:31 ` Mark Knecht
0 siblings, 2 replies; 55+ messages in thread
From: Tejun Heo @ 2010-07-07 17:26 UTC (permalink / raw)
To: Mark Knecht; +Cc: Linux Kernel List, linux-ide
Hello,
On 07/07/2010 07:06 PM, Mark Knecht wrote:
> 4 warm reboots. All 4 said 300 300. However the 4th one only showed an
> extra attempt at running the patch code with and also showed Tries =
> 2. I'm attaching boot #1 and boot #4 for now. I've saved them all if
> you need or just want them.
>
> Please note that in all 4 cases all drives were found. Nothing is
> missing in any test yet after adding these either of these patches.
>
> I've not tried cold boots yet. That's next.
Hmm... just in case you're being lucky, please keep an eye on it over
several days and report the result. I think all that's necessary is
slight modification to the resume logic but let's watch a bit first.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-07 17:26 ` Tejun Heo
@ 2010-07-07 17:32 ` Mark Knecht
2010-07-19 19:31 ` Mark Knecht
1 sibling, 0 replies; 55+ messages in thread
From: Mark Knecht @ 2010-07-07 17:32 UTC (permalink / raw)
To: Tejun Heo; +Cc: Linux Kernel List, linux-ide
On Wed, Jul 7, 2010 at 10:26 AM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On 07/07/2010 07:06 PM, Mark Knecht wrote:
>> 4 warm reboots. All 4 said 300 300. However the 4th one only showed an
>> extra attempt at running the patch code with and also showed Tries =
>> 2. I'm attaching boot #1 and boot #4 for now. I've saved them all if
>> you need or just want them.
>>
>> Please note that in all 4 cases all drives were found. Nothing is
>> missing in any test yet after adding these either of these patches.
>>
>> I've not tried cold boots yet. That's next.
>
> Hmm... just in case you're being lucky, please keep an eye on it over
> several days and report the result. I think all that's necessary is
> slight modification to the resume logic but let's watch a bit first.
>
> Thanks.
>
> --
> tejun
>
I've tried two cold boots so far. One of them had that same extra
Tries = 2 at the same place. I'll do a couple more just to see what
happens.
I'm happy to watch it as long as it takes and will certainly save any
results if and when a drive isn't found. This problem has run hot and
cold for a few months. Sometimes I go a week with every boot is good.
This last two weeks was finally bad enough to get me to report it.
I also want to investigate actually getting the BIOS AHCI setting
working, but I think I'll leave that alone for afew days so as to not
upset this experiment. Performance on the machine isn't critical right
now, assuming AHCI helps.
I'll get back to you when I've got something new to report.
Cheers,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-07 17:26 ` Tejun Heo
2010-07-07 17:32 ` Mark Knecht
@ 2010-07-19 19:31 ` Mark Knecht
2010-07-19 21:01 ` Tejun Heo
1 sibling, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-19 19:31 UTC (permalink / raw)
To: Tejun Heo; +Cc: Linux Kernel List, linux-ide
On Wed, Jul 7, 2010 at 10:26 AM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On 07/07/2010 07:06 PM, Mark Knecht wrote:
>> 4 warm reboots. All 4 said 300 300. However the 4th one only showed an
>> extra attempt at running the patch code with and also showed Tries =
>> 2. I'm attaching boot #1 and boot #4 for now. I've saved them all if
>> you need or just want them.
>>
>> Please note that in all 4 cases all drives were found. Nothing is
>> missing in any test yet after adding these either of these patches.
>>
>> I've not tried cold boots yet. That's next.
>
> Hmm... just in case you're being lucky, please keep an eye on it over
> several days and report the result. I think all that's necessary is
> slight modification to the resume logic but let's watch a bit first.
>
> Thanks.
>
> --
> tejun
>
Tejun,
With about 10-12 day of testing, 1-2 boots/day, I've not had a
single boot failure since adding the patch. Only twice has it said
tries=2. Every other time it's tries=1. The machine seems to work fine
either way.
Thanks,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-19 19:31 ` Mark Knecht
@ 2010-07-19 21:01 ` Tejun Heo
2010-07-20 3:14 ` Paul Check
0 siblings, 1 reply; 55+ messages in thread
From: Tejun Heo @ 2010-07-19 21:01 UTC (permalink / raw)
To: Mark Knecht; +Cc: Linux Kernel List, linux-ide
[-- Attachment #1: Type: text/plain, Size: 456 bytes --]
Hello,
On 07/19/2010 09:31 PM, Mark Knecht wrote:
> With about 10-12 day of testing, 1-2 boots/day, I've not had a
> single boot failure since adding the patch. Only twice has it said
> tries=2. Every other time it's tries=1. The machine seems to work fine
> either way.
Hmmm... can you please test the attached patch instead? It seems
likely that the root cause is not flakiness of SIDPR but incorrect
locking in libata EH code.
Thanks.
--
tejun
[-- Attachment #2: ata_piix-sidpr-lock.patch --]
[-- Type: text/x-patch, Size: 1609 bytes --]
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 7409f98..3971bc0 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -158,6 +158,7 @@ struct piix_map_db {
struct piix_host_priv {
const int *map;
u32 saved_iocfg;
+ spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */
void __iomem *sidpr;
};
@@ -951,12 +952,15 @@ static int piix_sidpr_scr_read(struct ata_link *link,
unsigned int reg, u32 *val)
{
struct piix_host_priv *hpriv = link->ap->host->private_data;
+ unsigned long flags;
if (reg >= ARRAY_SIZE(piix_sidx_map))
return -EINVAL;
+ spin_lock_irqsave(&hpriv->sidpr_lock, flags);
piix_sidpr_sel(link, reg);
*val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
+ spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
return 0;
}
@@ -964,12 +968,15 @@ static int piix_sidpr_scr_write(struct ata_link *link,
unsigned int reg, u32 val)
{
struct piix_host_priv *hpriv = link->ap->host->private_data;
+ unsigned long flags;
if (reg >= ARRAY_SIZE(piix_sidx_map))
return -EINVAL;
+ spin_lock_irqsave(&hpriv->sidpr_lock, flags);
piix_sidpr_sel(link, reg);
iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
+ spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
return 0;
}
@@ -1566,6 +1573,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
+ spin_lock_init(&hpriv->sidpr_lock);
/* Save IOCFG, this will be used for cable detection, quirk
* detection and restoration on detach. This is necessary
^ permalink raw reply related [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-19 21:01 ` Tejun Heo
@ 2010-07-20 3:14 ` Paul Check
2010-07-20 14:14 ` Tejun Heo
2010-07-20 20:52 ` Mark Knecht
0 siblings, 2 replies; 55+ messages in thread
From: Paul Check @ 2010-07-20 3:14 UTC (permalink / raw)
To: Tejun Heo; +Cc: Mark Knecht, Linux Kernel List, linux-ide
Hey Tejun: I guess this is the same patch that you sent me to fix my issue
with missing drives. Good news: I've been through about 10 reboots now
and no problems. Based on my prior experience, I'd say with the old
setup, 10 clean boots in a row was probably less than a 1% event. So, it
seems that this has fixed my problem.
Thanks!
Regards, Paul
> Hello,
>
> On 07/19/2010 09:31 PM, Mark Knecht wrote:
>> With about 10-12 day of testing, 1-2 boots/day, I've not had a
>> single boot failure since adding the patch. Only twice has it said
>> tries=2. Every other time it's tries=1. The machine seems to work fine
>> either way.
>
> Hmmm... can you please test the attached patch instead? It seems
> likely that the root cause is not flakiness of SIDPR but incorrect
> locking in libata EH code.
>
> Thanks.
>
> --
> tejun
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-20 3:14 ` Paul Check
@ 2010-07-20 14:14 ` Tejun Heo
2010-07-20 20:52 ` Mark Knecht
1 sibling, 0 replies; 55+ messages in thread
From: Tejun Heo @ 2010-07-20 14:14 UTC (permalink / raw)
To: Paul Check; +Cc: Mark Knecht, Linux Kernel List, linux-ide
Helo,
On 07/20/2010 05:14 AM, Paul Check wrote:
> Hey Tejun: I guess this is the same patch that you sent me to fix my issue
> with missing drives. Good news: I've been through about 10 reboots now
> and no problems. Based on my prior experience, I'd say with the old
> setup, 10 clean boots in a row was probably less than a 1% event. So, it
> seems that this has fixed my problem.
Yeap, it's the same one. I'm forwarding the patch upstream now but,
Mark, please let me know the test result.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
@ 2010-07-20 14:14 ` Tejun Heo
0 siblings, 0 replies; 55+ messages in thread
From: Tejun Heo @ 2010-07-20 14:14 UTC (permalink / raw)
To: Paul Check; +Cc: Mark Knecht, Linux Kernel List, linux-ide
Helo,
On 07/20/2010 05:14 AM, Paul Check wrote:
> Hey Tejun: I guess this is the same patch that you sent me to fix my issue
> with missing drives. Good news: I've been through about 10 reboots now
> and no problems. Based on my prior experience, I'd say with the old
> setup, 10 clean boots in a row was probably less than a 1% event. So, it
> seems that this has fixed my problem.
Yeap, it's the same one. I'm forwarding the patch upstream now but,
Mark, please let me know the test result.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-20 14:14 ` Tejun Heo
(?)
@ 2010-07-20 14:53 ` Mark Knecht
2010-07-20 16:16 ` Mark Knecht
-1 siblings, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-20 14:53 UTC (permalink / raw)
To: Tejun Heo; +Cc: Paul Check, Linux Kernel List, linux-ide
On Tue, Jul 20, 2010 at 7:14 AM, Tejun Heo <tj@kernel.org> wrote:
> Helo,
>
> On 07/20/2010 05:14 AM, Paul Check wrote:
>> Hey Tejun: I guess this is the same patch that you sent me to fix my issue
>> with missing drives. Good news: I've been through about 10 reboots now
>> and no problems. Based on my prior experience, I'd say with the old
>> setup, 10 clean boots in a row was probably less than a 1% event. So, it
>> seems that this has fixed my problem.
>
> Yeap, it's the same one. I'm forwarding the patch upstream now but,
> Mark, please let me know the test result.
>
> Thanks.
>
> --
> tejun
>
Tejun,
I'm traveling but back tonight. I'll try it then.
Thanks,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-20 14:53 ` Mark Knecht
@ 2010-07-20 16:16 ` Mark Knecht
0 siblings, 0 replies; 55+ messages in thread
From: Mark Knecht @ 2010-07-20 16:16 UTC (permalink / raw)
To: Tejun Heo; +Cc: Paul Check, Linux Kernel List, linux-ide
[-- Attachment #1: Type: text/plain, Size: 1840 bytes --]
On Tue, Jul 20, 2010 at 7:53 AM, Mark Knecht <markknecht@gmail.com> wrote:
> On Tue, Jul 20, 2010 at 7:14 AM, Tejun Heo <tj@kernel.org> wrote:
>> Helo,
>>
>> On 07/20/2010 05:14 AM, Paul Check wrote:
>>> Hey Tejun: I guess this is the same patch that you sent me to fix my issue
>>> with missing drives. Good news: I've been through about 10 reboots now
>>> and no problems. Based on my prior experience, I'd say with the old
>>> setup, 10 clean boots in a row was probably less than a 1% event. So, it
>>> seems that this has fixed my problem.
>>
>> Yeap, it's the same one. I'm forwarding the patch upstream now but,
>> Mark, please let me know the test result.
>>
>> Thanks.
>>
>> --
>> tejun
>>
>
> Tejun,
> I'm traveling but back tonight. I'll try it then.
>
> Thanks,
> Mark
>
OK, I was able to get into the machine remotely for a few minutes. I
think the patch applied correctly and the machine cold booted cleanly.
(My wife powered it up for me.)
I'll do more boots later when you confirm everything looks reasonable.
I don't see any print statement in the patch so I don't know what to
look for. I'm attaching a dmesg file for you to review.
Assuming I did this right then everything seems good so far.
Cheers,
Mark
c2stable linux # patch --verbose -p1 <~mark/Downloads/ata_piix-sidpr-lock.patch
Hmm... Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
|index 7409f98..3971bc0 100644
|--- a/drivers/ata/ata_piix.c
|+++ b/drivers/ata/ata_piix.c
--------------------------
Patching file drivers/ata/ata_piix.c using Plan A...
Hunk #1 succeeded at 158.
Hunk #2 succeeded at 952.
Hunk #3 succeeded at 968.
Hunk #4 succeeded at 1573.
done
c2stable linux #
[-- Attachment #2: dmesg.Patch-New.COLDTest1 --]
[-- Type: application/octet-stream, Size: 62896 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo-r2 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP PREEMPT Sun Jul 18 14:09:48 PDT 2010
[ 0.000000] Command line: root=/dev/md5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 1G
[ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000
[ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143439
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 12
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] early_res array is doubled to 64 at [14000 - 147ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
[ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
[ 0.000000] Kernel command line: root=/dev/md5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] early_res array is doubled to 128 at [14800 - 157ff]
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (60 early reservations)
[ 0.000000] #1 [0001000000 - 0001771144] TEXT DATA BSS
[ 0.000000] #2 [0001772000 - 0001772298] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved
[ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM
[ 0.000000] #11 [0001771180 - 0001771780] BOOTMEM
[ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM
[ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM
[ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0
[ 0.000000] #15 [0001771780 - 0001771900] BOOTMEM
[ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM
[ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM
[ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM
[ 0.000000] #19 [0001771900 - 0001771941] BOOTMEM
[ 0.000000] #20 [0001771980 - 0001771a06] BOOTMEM
[ 0.000000] #21 [0001771a40 - 0001771ca8] BOOTMEM
[ 0.000000] #22 [0001771cc0 - 0001771d28] BOOTMEM
[ 0.000000] #23 [0001771d40 - 0001771da8] BOOTMEM
[ 0.000000] #24 [0001771dc0 - 0001771e28] BOOTMEM
[ 0.000000] #25 [0001771e40 - 0001771ea8] BOOTMEM
[ 0.000000] #26 [0001771ec0 - 0001771f28] BOOTMEM
[ 0.000000] #27 [0001771f40 - 0001771fa8] BOOTMEM
[ 0.000000] #28 [00017a32c0 - 00017a3328] BOOTMEM
[ 0.000000] #29 [00017a3340 - 00017a33a8] BOOTMEM
[ 0.000000] #30 [00017a33c0 - 00017a3428] BOOTMEM
[ 0.000000] #31 [00017a3440 - 00017a34a8] BOOTMEM
[ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM
[ 0.000000] #33 [00017a34c0 - 00017a34ce] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM
[ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM
[ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM
[ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM
[ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM
[ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM
[ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM
[ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM
[ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM
[ 0.000000] #46 [00017a3500 - 00017a3508] BOOTMEM
[ 0.000000] #47 [00017a3540 - 00017a3548] BOOTMEM
[ 0.000000] #48 [00017a3580 - 00017a35b0] BOOTMEM
[ 0.000000] #49 [00017a35c0 - 00017a3620] BOOTMEM
[ 0.000000] #50 [00017a3640 - 00017a3750] BOOTMEM
[ 0.000000] #51 [00017a3780 - 00017a37c8] BOOTMEM
[ 0.000000] #52 [00017a3800 - 00017a3848] BOOTMEM
[ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM
[ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM
[ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM
[ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM
[ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM
[ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM
[ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 12302060k/13631488k available (3631k kernel code, 1057732k absent, 271696k reserved, 2957k data, 476k init)
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3337.851 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6675.70 BogoMIPS (lpj=3337851)
[ 0.000298] Security Framework initialized
[ 0.000439] Mount-cache hash table entries: 256
[ 0.000648] CPU: Physical Processor ID: 0
[ 0.000774] CPU: Processor Core ID: 0
[ 0.000902] mce: CPU supports 9 MCE banks
[ 0.001038] CPU0: Thermal monitoring enabled (TM1)
[ 0.001172] using mwait in idle threads.
[ 0.001305] Performance Events: Westmere events, Intel PMU driver.
[ 0.001486] ... version: 3
[ 0.001612] ... bit width: 48
[ 0.001737] ... generic registers: 4
[ 0.001862] ... value mask: 0000ffffffffffff
[ 0.001990] ... max period: 000000007fffffff
[ 0.002118] ... fixed-purpose events: 3
[ 0.002250] ... event mask: 000000070000000f
[ 0.002398] Freeing SMP alternatives: 36k freed
[ 0.002529] ACPI: Core revision 20100121
[ 0.046879] Setting APIC routing to physical flat
[ 0.047443] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057548] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
[ 0.164782] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
[ 1.209975] Brought up 12 CPUs
[ 1.210101] Total of 12 processors activated (81162.28 BogoMIPS).
[ 1.216630] NET: Registered protocol family 16
[ 1.219558] ACPI: bus type pci registered
[ 1.219741] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.219971] PCI: not using MMCONFIG
[ 1.220095] PCI: Using configuration type 1 for base access
[ 1.222157] bio: create slab <bio-0> at 0
[ 1.223489] ACPI: EC: Look up EC in DSDT
[ 1.224602] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.308252] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.309081] ACPI: Interpreter enabled
[ 1.309206] ACPI: (supports S0 S5)
[ 1.309384] ACPI: Using IOAPIC for interrupt routing
[ 1.309549] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.311350] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.337039] ACPI: No dock devices found.
[ 1.337165] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.337496] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.337843] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.337973] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.338102] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.338326] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.338550] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.338775] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.339039] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.339042] pci 0000:00:00.0: PME# disabled
[ 1.339084] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.339086] pci 0000:00:01.0: PME# disabled
[ 1.339128] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.339131] pci 0000:00:03.0: PME# disabled
[ 1.339175] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.339177] pci 0000:00:07.0: PME# disabled
[ 1.339345] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
[ 1.339398] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
[ 1.339451] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
[ 1.339503] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 1.339549] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.339552] pci 0000:00:1a.7: PME# disabled
[ 1.339580] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 1.339613] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.339616] pci 0000:00:1b.0: PME# disabled
[ 1.339669] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.339671] pci 0000:00:1c.0: PME# disabled
[ 1.339725] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.339728] pci 0000:00:1c.2: PME# disabled
[ 1.339781] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.339783] pci 0000:00:1c.4: PME# disabled
[ 1.339836] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.339839] pci 0000:00:1c.5: PME# disabled
[ 1.339878] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
[ 1.339931] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
[ 1.339984] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
[ 1.340036] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 1.340082] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.340085] pci 0000:00:1d.7: PME# disabled
[ 1.340180] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 1.340405] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.340537] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.340801] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
[ 1.340806] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
[ 1.340810] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
[ 1.340814] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
[ 1.340818] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
[ 1.340822] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
[ 1.340858] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 1.340868] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.340898] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
[ 1.340902] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
[ 1.340906] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
[ 1.340910] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
[ 1.340915] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
[ 1.340919] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
[ 1.340969] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.341097] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.341099] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.341103] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.341130] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.341257] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.341260] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.341263] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.341304] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.341311] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[ 1.341315] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
[ 1.341322] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[ 1.341336] pci 0000:03:00.0: supports D1 D2
[ 1.341358] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[ 1.341386] pci 0000:03:00.1: supports D1 D2
[ 1.341396] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.341524] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.341527] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.341531] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.341563] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.341693] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.341696] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.341701] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.341766] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.341772] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.341795] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.341830] pci 0000:06:00.0: supports D1 D2
[ 1.341831] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.341835] pci 0000:06:00.0: PME# disabled
[ 1.341844] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.341972] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.341975] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.341980] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.342077] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 1.342111] pci 0000:05:00.0: PME# supported from D3hot
[ 1.342115] pci 0000:05:00.0: PME# disabled
[ 1.342155] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.342162] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
[ 1.342170] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
[ 1.342177] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.342184] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.342237] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.342365] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.342368] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.342372] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.342437] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 1.342444] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.342467] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 1.342502] pci 0000:04:00.0: supports D1 D2
[ 1.342503] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.342507] pci 0000:04:00.0: PME# disabled
[ 1.342516] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.342647] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.342650] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.342654] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.342693] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 1.342698] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
[ 1.342735] pci 0000:08:02.0: supports D2
[ 1.342736] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 1.342739] pci 0000:08:02.0: PME# disabled
[ 1.342775] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.342906] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.342909] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.342913] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.342914] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.342916] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.342917] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.342919] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.342920] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.342922] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.342946] pci_bus 0000:00: on NUMA node 0
[ 1.342949] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.343178] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.343253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.343299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.343343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.343395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.343438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.343480] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.343523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.364030] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.364520] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.364807] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.365292] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.365781] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.366266] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.366754] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.367239] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.367822] SCSI subsystem initialized
[ 1.368056] libata version 3.00 loaded.
[ 1.368137] usbcore: registered new interface driver usbfs
[ 1.368283] usbcore: registered new interface driver hub
[ 1.368433] usbcore: registered new device driver usb
[ 1.368671] PCI: Using ACPI for IRQ routing
[ 1.368796] PCI: pci_cache_line_size set to 64 bytes
[ 1.368878] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.368880] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.368949] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.369199] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.371339] Switching to clocksource tsc
[ 1.371842] pnp: PnP ACPI init
[ 1.371968] ACPI: bus type pnp registered
[ 1.374507] pnp: PnP ACPI: found 17 devices
[ 1.374634] ACPI: ACPI bus type pnp unregistered
[ 1.374764] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.374893] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.375021] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.375149] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.375277] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.375406] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.375540] system 00:07: [io 0x0290-0x029f] has been reserved
[ 1.375669] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.375796] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.375923] system 00:08: [io 0x0500-0x057f] could not be reserved
[ 1.376051] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.376179] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.376307] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.376437] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.376571] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.376700] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.376830] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.376959] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.377088] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.377216] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.377345] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.377474] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.382195] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.382325] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.382550] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.382773] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.382995] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.383122] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.383248] pci 0000:00:01.0: bridge window [io disabled]
[ 1.383375] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.383503] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.383634] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.383759] pci 0000:00:03.0: bridge window [io disabled]
[ 1.383887] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.384014] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.384144] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.384270] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.384399] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.384530] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.384755] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.384881] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.385010] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.385140] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.385365] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.385491] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.385622] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.385752] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.385977] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.386103] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.386232] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.386362] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.386589] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.386715] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.386844] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.386974] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.387199] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.387325] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.387454] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.387586] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.387721] pci 0000:00:01.0: setting latency timer to 64
[ 1.387726] pci 0000:00:03.0: setting latency timer to 64
[ 1.387731] pci 0000:00:07.0: setting latency timer to 64
[ 1.387736] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.387866] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.387996] pci 0000:00:1c.0: setting latency timer to 64
[ 1.388002] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.388132] pci 0000:00:1c.2: setting latency timer to 64
[ 1.388137] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.388267] pci 0000:00:1c.4: setting latency timer to 64
[ 1.388273] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.388403] pci 0000:00:1c.5: setting latency timer to 64
[ 1.388408] pci 0000:00:1e.0: setting latency timer to 64
[ 1.388410] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.388411] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.388413] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.388414] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.388415] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.388416] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.388418] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 1.388419] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.388420] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.388422] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.388423] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.388424] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.388426] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.388427] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.388428] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.388430] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.388431] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.388432] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.388434] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.388435] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.388436] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.388438] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 1.388439] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.388440] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.388441] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.388443] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.388444] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.388445] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.388446] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.388488] NET: Registered protocol family 2
[ 1.388665] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.389337] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.390017] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.390248] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.390376] TCP reno registered
[ 1.390503] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.390665] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.390909] NET: Registered protocol family 1
[ 1.391178] RPC: Registered udp transport module.
[ 1.391302] RPC: Registered tcp transport module.
[ 1.391427] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.391695] pci 0000:03:00.0: Boot video device
[ 1.391708] PCI: CLS 256 bytes, default 64
[ 1.391733] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.391861] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
[ 1.392083] software IO TLB at phys 0xe000000 - 0x12000000
[ 1.394270] VFS: Disk quotas dquot_6.5.2
[ 1.394413] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.394834] NTFS driver 2.1.29 [Flags: R/W].
[ 1.394997] fuse init (API version 7.13)
[ 1.395171] msgmni has been set to 24027
[ 1.395547] alg: No test for stdrng (krng)
[ 1.395702] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.395927] io scheduler noop registered
[ 1.396050] io scheduler deadline registered
[ 1.396190] io scheduler cfq registered (default)
[ 1.396379] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.396403] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.396466] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.396488] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.396548] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.396570] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.396631] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.396658] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.396745] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.396773] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.396859] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.396887] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.396971] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.396998] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.397098] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.397103] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.397106] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.398575] Non-volatile memory driver v1.3
[ 1.398794] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.399019] ACPI: Power Button [PWRB]
[ 1.399176] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.399399] ACPI: Power Button [PWRF]
[ 1.400032] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.401292] brd: module loaded
[ 1.401844] loop: module loaded
[ 1.402079] ahci 0000:05:00.0: version 3.0
[ 1.402092] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.412505] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.412738] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.412870] ahci 0000:05:00.0: setting latency timer to 64
[ 1.412948] scsi0 : ahci
[ 1.413147] scsi1 : ahci
[ 1.415984] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.416208] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.416471] ata_piix 0000:00:1f.2: version 2.13
[ 1.416480] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.416610] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.416881] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.416913] scsi2 : ata_piix
[ 1.417094] scsi3 : ata_piix
[ 1.418475] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[ 1.418607] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[ 1.418751] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.418883] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.419150] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.419170] scsi4 : ata_piix
[ 1.419350] scsi5 : ata_piix
[ 1.420539] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[ 1.420672] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[ 1.420885] console [netcon0] enabled
[ 1.421008] netconsole: network logging started
[ 1.421191] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.421330] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.421466] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.421468] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.421633] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.421874] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.425871] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.425879] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.435421] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.435568] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.435698] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.435919] usb usb1: Product: EHCI Host Controller
[ 1.436045] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r2 ehci_hcd
[ 1.436172] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.436369] hub 1-0:1.0: USB hub found
[ 1.436495] hub 1-0:1.0: 6 ports detected
[ 1.436660] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.436796] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.436798] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.436956] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.437194] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.441180] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.441188] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.450383] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.450525] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.450655] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.450877] usb usb2: Product: EHCI Host Controller
[ 1.451002] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r2 ehci_hcd
[ 1.451129] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.451320] hub 2-0:1.0: USB hub found
[ 1.451445] hub 2-0:1.0: 6 ports detected
[ 1.451622] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.451771] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.451915] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.452046] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.452048] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.452209] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.452450] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.452598] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.452726] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.452947] usb usb3: Product: UHCI Host Controller
[ 1.453072] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.453199] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.453391] hub 3-0:1.0: USB hub found
[ 1.453516] hub 3-0:1.0: 2 ports detected
[ 1.453672] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.453803] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.453805] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.453964] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.454209] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.454353] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.454482] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.454706] usb usb4: Product: UHCI Host Controller
[ 1.454831] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.454958] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.455148] hub 4-0:1.0: USB hub found
[ 1.455273] hub 4-0:1.0: 2 ports detected
[ 1.455425] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.455556] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.455558] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.455719] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.455965] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.456109] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.456238] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.456459] usb usb5: Product: UHCI Host Controller
[ 1.456586] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.456714] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.456905] hub 5-0:1.0: USB hub found
[ 1.457030] hub 5-0:1.0: 2 ports detected
[ 1.457182] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.457313] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.457315] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.457473] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.457716] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.457861] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.457989] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.458210] usb usb6: Product: UHCI Host Controller
[ 1.458335] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.458462] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.458654] hub 6-0:1.0: USB hub found
[ 1.458780] hub 6-0:1.0: 2 ports detected
[ 1.458931] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.459063] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.459065] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.459223] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.459464] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.459612] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.459740] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.459961] usb usb7: Product: UHCI Host Controller
[ 1.460086] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.460213] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.460403] hub 7-0:1.0: USB hub found
[ 1.460528] hub 7-0:1.0: 2 ports detected
[ 1.460681] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.460813] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.460815] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.460973] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.461213] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.461357] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.461486] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.461710] usb usb8: Product: UHCI Host Controller
[ 1.461834] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.461961] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.462151] hub 8-0:1.0: USB hub found
[ 1.462276] hub 8-0:1.0: 2 ports detected
[ 1.462445] Initializing USB Mass Storage driver...
[ 1.462611] usbcore: registered new interface driver usb-storage
[ 1.462738] USB Mass Storage support registered.
[ 1.462899] usbcore: registered new interface driver libusual
[ 1.463077] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.464766] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.464895] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.465072] mice: PS/2 mouse device common for all mice
[ 1.465304] i2c /dev entries driver
[ 1.465469] md: raid0 personality registered for level 0
[ 1.465597] md: raid1 personality registered for level 1
[ 1.465813] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.466039] cpuidle: using governor ladder
[ 1.466164] cpuidle: using governor menu
[ 1.466409] usbcore: registered new interface driver hiddev
[ 1.466559] usbcore: registered new interface driver usbhid
[ 1.466687] usbhid: USB HID core driver
[ 1.466968] TCP cubic registered
[ 1.467091] NET: Registered protocol family 17
[ 1.467615] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.482445] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.720715] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.720719] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.823426] ata5: link resume succeeded after 1 retries
[ 1.823429] ata6: link resume succeeded after 1 retries
[ 1.925195] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.925338] ata6.00: link online but device misclassifed
[ 1.925339] ata6: link online but 1 devices misclassified, retrying
[ 1.925468] ata6: reset failed (errno=-11), retrying in 10 secs
[ 2.051842] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.075819] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.079052] ata5.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.079190] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.085896] ata5.00: configured for UDMA/133
[ 2.177573] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.177717] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.183631] ata3.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
[ 2.183929] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.184066] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.189631] ata3.00: configured for UDMA/100
[ 2.195778] ata3.01: configured for UDMA/133
[ 2.197681] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
[ 2.202614] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.202847] Uniform CD-ROM driver Revision: 3.20
[ 2.203042] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.203097] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.203293] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.206292] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.206540] sd 2:0:1:0: [sda] Write Protect is off
[ 2.206665] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.206676] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.206982] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.206983] sda:
[ 2.212578] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.212832] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.212961] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
[ 2.213090] usb 3-2: Manufacturer: American Power Conversion
[ 2.213217] usb 3-2: SerialNumber: 3B1007X44377
[ 2.218877] sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.258589] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.285301] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.285445] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.292021] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.292158] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.292460] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.292597] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.296467] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
[ 2.300021] ata4.00: configured for UDMA/133
[ 2.307172] ata4.01: configured for UDMA/133
[ 2.307345] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.307672] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.307707] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.307770] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.307879] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.307904] sd 3:0:1:0: [sdc] Write Protect is off
[ 2.307905] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.307915] sd 3:0:1:0: Attached scsi generic sg3 type 0
[ 2.307917] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.307984] scsi 4:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.308042] sdc:
[ 2.308108] sd 4:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.308133] sd 4:0:0:0: [sdd] Write Protect is off
[ 2.308135] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.308146] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.308159] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 2.308211] sdd: sdc1 sdc2 sdc3 sdc4 < sdd1
[ 2.325942] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 2.334606] sdc5 sdc6 >
[ 2.348149] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.348151] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.348166] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.363369] sdb: sdb1 sdb2 sdb3
[ 2.372215] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 2.372469] sdb4 < sdb5 sdb6 >
[ 2.414075] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.501689] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.671135] usb 8-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.671275] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.671405] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.671534] usb 8-2: Manufacturer: Microsoft
[ 2.689226] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.689523] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 4.584921] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 11.849771] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 11.853009] ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 11.853146] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 11.859767] ata6.00: configured for UDMA/133
[ 11.859940] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 11.860270] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 11.860297] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 11.860644] sd 5:0:0:0: [sde] Write Protect is off
[ 11.860771] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 11.860781] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.861077] sde: sde1
[ 11.869932] sd 5:0:0:0: [sde] Attached SCSI disk
[ 11.870065] md: Waiting for all devices to be available before autodetect
[ 11.870195] md: If you don't use raid, use raid=noautodetect
[ 11.870403] md: Autodetecting RAID arrays.
[ 11.924949] md: Scanned 6 and added 6 devices.
[ 11.925082] md: autorun ...
[ 11.925204] md: considering sdb5 ...
[ 11.925330] md: adding sdb5 ...
[ 11.925454] md: sdb3 has different UUID to sdb5
[ 11.925583] md: adding sdc5 ...
[ 11.925707] md: sdc3 has different UUID to sdb5
[ 11.925834] md: adding sda5 ...
[ 11.925958] md: sda3 has different UUID to sdb5
[ 11.926160] md: created md5
[ 11.926283] md: bind<sda5>
[ 11.926409] md: bind<sdc5>
[ 11.926537] md: bind<sdb5>
[ 11.926663] md: running: <sdb5><sdc5><sda5>
[ 11.926951] raid1: raid set md5 active with 3 out of 3 mirrors
[ 11.927089] md5: detected capacity change from 0 to 53694496768
[ 11.927234] md: considering sdb3 ...
[ 11.927359] md: adding sdb3 ...
[ 11.927484] md: adding sdc3 ...
[ 11.927610] md: adding sda3 ...
[ 11.927802] md: created md3
[ 11.927925] md: bind<sda3>
[ 11.928051] md: bind<sdc3>
[ 11.928176] md: bind<sdb3>
[ 11.928303] md: running: <sdb3><sdc3><sda3>
[ 11.928590] raid1: raid set md3 active with 3 out of 3 mirrors
[ 11.928727] md3: detected capacity change from 0 to 53694562304
[ 11.928871] md: ... autorun DONE.
[ 11.929026] md5: unknown partition table
[ 11.972364] kjournald starting. Commit interval 5 seconds
[ 11.972370] EXT3-fs (md5): mounted filesystem with writeback data mode
[ 11.972380] VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
[ 11.972760] Freeing unused kernel memory: 476k freed
[ 11.972941] Write protecting the kernel read-only data: 6144k
[ 11.973149] Freeing unused kernel memory: 448k freed
[ 11.973346] Freeing unused kernel memory: 248k freed
[ 13.964241] udev: starting version 149
[ 14.073299] rtc_cmos 00:03: RTC can wake from S4
[ 14.073337] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 14.073362] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 14.105021] md3:
[ 14.124841] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 14.124844] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [mem 0x00000400-0x0000040f disabled]
[ 14.124846] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.134116] unknown partition table
[ 14.213978] Linux agpgart interface v0.103
[ 14.321784] sky2: driver version 1.27
[ 14.321806] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.321816] sky2 0000:06:00.0: setting latency timer to 64
[ 14.321847] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 14.321929] sky2 0000:06:00.0: irq 55 for MSI/MSI-X
[ 14.322112] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
[ 14.322125] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.322132] sky2 0000:04:00.0: setting latency timer to 64
[ 14.322152] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 14.322232] sky2 0000:04:00.0: irq 56 for MSI/MSI-X
[ 14.322403] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
[ 14.467682] [drm] Initialized drm 1.1.0 20060810
[ 14.701145] [drm] radeon defaulting to kernel modesetting.
[ 14.701147] [drm] radeon kernel modesetting enabled.
[ 14.701181] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 14.701184] radeon 0000:03:00.0: setting latency timer to 64
[ 14.701885] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[ 14.702030] [drm] register mmio base: 0xFBAC0000
[ 14.702031] [drm] register mmio size: 131072
[ 14.702102] ATOM BIOS: JUNIPER
[ 14.702111] [drm] Clocks initialized !
[ 14.702112] [drm] 1 Power State(s)
[ 14.702113] [drm] State 0 Default (default)
[ 14.702114] [drm] 16 PCIE Lanes
[ 14.702114] [drm] 1 Clock Mode(s)
[ 14.702115] [drm] 0 engine/memory: 850000/1200000
[ 14.702119] [drm] radeon: power management initialized
[ 14.702125] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 14.702126] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 14.702136] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 14.702138] [drm] Detected VRAM RAM=256M, BAR=256M
[ 14.702139] [drm] RAM width 128bits DDR
[ 14.702161] [TTM] Zone kernel: Available graphics memory: 6151634 kiB.
[ 14.702162] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 14.702169] [drm] radeon: 256M of VRAM memory ready
[ 14.702170] [drm] radeon: 512M of GTT memory ready.
[ 14.703525] [drm] Radeon Display Connectors
[ 14.703527] [drm] Connector 0:
[ 14.703528] [drm] DisplayPort
[ 14.703530] [drm] HPD4
[ 14.703532] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 14.703533] [drm] Encoders:
[ 14.703535] [drm] DFP1: INTERNAL_UNIPHY2
[ 14.703536] [drm] Connector 1:
[ 14.703537] [drm] HDMI-A
[ 14.703538] [drm] HPD5
[ 14.703540] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 14.703542] [drm] Encoders:
[ 14.703543] [drm] DFP2: INTERNAL_UNIPHY2
[ 14.703545] [drm] Connector 2:
[ 14.703546] [drm] DVI-I
[ 14.703547] [drm] HPD1
[ 14.703549] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 14.703551] [drm] Encoders:
[ 14.703552] [drm] DFP3: INTERNAL_UNIPHY1
[ 14.703554] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 14.703555] [drm] Connector 3:
[ 14.703557] [drm] DVI-I
[ 14.703558] [drm] HPD6
[ 14.703560] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 14.703562] [drm] Encoders:
[ 14.703563] [drm] DFP4: INTERNAL_UNIPHY
[ 14.703564] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 14.898791] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.898837] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 14.898860] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.052552] [drm] fb mappable at 0xD0040000
[ 15.052554] [drm] vram apper at 0xD0000000
[ 15.052555] [drm] size 8294400
[ 15.052556] [drm] fb depth is 24
[ 15.052556] [drm] pitch is 7680
[ 15.060755] Console: switching to colour frame buffer device 240x67
[ 15.064649] fb0: radeondrmfb frame buffer device
[ 15.064650] registered panic notifier
[ 15.064653] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
[ 15.285631] hda_codec: AD1989B: BIOS auto-probing.
[ 15.287875] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 15.287921] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
[ 15.287942] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 15.732759] EXT3-fs (md5): using internal journal
[ 16.016071] md: md11 stopped.
[ 16.045548] md: bind<sde1>
[ 16.045729] md: bind<sdd1>
[ 16.046210] raid0: looking at sdd1
[ 16.046212] raid0: comparing sdd1(104871936)
[ 16.046213] with sdd1(104871936)
[ 16.046214] raid0: END
[ 16.046214] raid0: ==> UNIQUE
[ 16.046215] raid0: 1 zones
[ 16.046216] raid0: looking at sde1
[ 16.046217] raid0: comparing sde1(104871936)
[ 16.046218] with sdd1(104871936)
[ 16.046219] raid0: EQUAL
[ 16.046220] raid0: FINAL 1 zones
[ 16.046221] raid0: done.
[ 16.046222] raid0 : md_size is 209743872 sectors.
[ 16.046223] ******* md11 configuration *********
[ 16.046224] zone0=[sdd1/sde1/]
[ 16.046226] zone offset=0kb device offset=0kb size=104871936kb
[ 16.046227] **********************************
[ 16.046228]
[ 16.046231] md11: detected capacity change from 0 to 107388862464
[ 16.046728] md11: unknown partition table
[ 16.052188] md: md6 stopped.
[ 16.055522] md: bind<sdb6>
[ 16.055690] md: bind<sdc6>
[ 16.055853] md: bind<sda6>
[ 16.056462] raid1: raid set md6 active with 3 out of 3 mirrors
[ 16.056474] md6: detected capacity change from 0 to 253354939392
[ 16.056984] md6: unknown partition table
[ 16.557114] kjournald starting. Commit interval 5 seconds
[ 16.557120] EXT3-fs (md11): warning: maximal mount count reached, running e2fsck is recommended
[ 16.557353] EXT3-fs (md11): using internal journal
[ 16.557356] EXT3-fs (md11): mounted filesystem with writeback data mode
[ 16.583069] kjournald starting. Commit interval 5 seconds
[ 16.583074] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 16.599428] EXT3-fs (md6): using internal journal
[ 16.599433] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 16.655888] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 16.657150] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 16.658580] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 22.331992] sky2 0000:06:00.0: eth0: enabling interface
[ 24.156276] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 33.980046] NET: Registered protocol family 10
[ 36.252726] /dev/vmmon[4192]: Module vmmon: registered with major=10 minor=165
[ 36.252734] /dev/vmmon[4192]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 36.252739] /dev/vmmon[4192]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 36.252741] /dev/vmmon[4192]: Module vmmon: initialized
[ 36.302012] /dev/vmci[4211]: VMCI: Driver initialized.
[ 36.302028] /dev/vmci[4211]: Module vmci: registered with major=10 minor=59
[ 36.302030] /dev/vmci[4211]: Module vmci: initialized
[ 36.590732] /dev/vmnet: open called by PID 4293 (vmnet-bridge)
[ 36.590739] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 36.590758] /dev/vmnet: port on hub 0 successfully opened
[ 36.590773] bridge-eth0: up
[ 36.590776] bridge-eth0: attached
[ 37.807934] /dev/vmnet: open called by PID 4300 (vmnet-dhcpd)
[ 37.807939] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 37.807958] /dev/vmnet: port on hub 1 successfully opened
[ 37.869709] /dev/vmnet: open called by PID 4302 (vmnet-netifup)
[ 37.869714] /dev/vmnet: port on hub 1 successfully opened
[ 37.921278] /dev/vmnet: open called by PID 4305 (vmnet-dhcpd)
[ 37.921283] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 37.921303] /dev/vmnet: port on hub 8 successfully opened
[ 37.994666] /dev/vmnet: open called by PID 4309 (vmnet-natd)
[ 37.994672] /dev/vmnet: port on hub 8 successfully opened
[ 38.006727] /dev/vmnet: open called by PID 4310 (vmnet-netifup)
[ 38.006734] /dev/vmnet: port on hub 8 successfully opened
[ 44.808852] eth0: no IPv6 routers present
[ 48.086634] vmnet1: no IPv6 routers present
[ 48.479639] vmnet8: no IPv6 routers present
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-20 3:14 ` Paul Check
2010-07-20 14:14 ` Tejun Heo
@ 2010-07-20 20:52 ` Mark Knecht
2010-07-20 21:19 ` Paul Check
1 sibling, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-20 20:52 UTC (permalink / raw)
To: Paul Check; +Cc: Tejun Heo, Linux Kernel List, linux-ide
On Mon, Jul 19, 2010 at 8:14 PM, Paul Check <paul@thechecks.ca> wrote:
> Hey Tejun: I guess this is the same patch that you sent me to fix my issue
> with missing drives. Good news: I've been through about 10 reboots now
> and no problems. Based on my prior experience, I'd say with the old
> setup, 10 clean boots in a row was probably less than a 1% event. So, it
> seems that this has fixed my problem.
>
> Thanks!
>
> Regards, Paul
>
Hey Paul. Glad it worked for you as it did for me.
Was your hardware in any way similar to mine?
- Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-20 20:52 ` Mark Knecht
@ 2010-07-20 21:19 ` Paul Check
2010-07-20 21:26 ` Mark Knecht
0 siblings, 1 reply; 55+ messages in thread
From: Paul Check @ 2010-07-20 21:19 UTC (permalink / raw)
To: Mark Knecht; +Cc: Paul Check, Tejun Heo, Linux Kernel List, linux-ide
I missed your hardware. I have an ASUS PT 6 Deluxe V2 board with 4 drives.
I think they are 1TB each, Seagate SATA drives. P
> On Mon, Jul 19, 2010 at 8:14 PM, Paul Check <paul@thechecks.ca> wrote:
>> Hey Tejun: I guess this is the same patch that you sent me to fix my
>> issue
>> with missing drives. Â Good news: I've been through about 10 reboots now
>> and no problems. Â Based on my prior experience, I'd say with the old
>> setup, 10 clean boots in a row was probably less than a 1% event. Â So,
>> it
>> seems that this has fixed my problem.
>>
>> Thanks!
>>
>> Regards, Paul
>>
>
> Hey Paul. Glad it worked for you as it did for me.
>
> Was your hardware in any way similar to mine?
>
> - Mark
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-20 21:19 ` Paul Check
@ 2010-07-20 21:26 ` Mark Knecht
2010-07-20 23:05 ` Paul Check
0 siblings, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-07-20 21:26 UTC (permalink / raw)
To: Paul Check; +Cc: Tejun Heo, Linux Kernel List, linux-ide
On Tue, Jul 20, 2010 at 2:19 PM, Paul Check <paul@thechecks.ca> wrote:
> I missed your hardware. I have an ASUS PT 6 Deluxe V2 board with 4 drives.
> I think they are 1TB each, Seagate SATA drives. P
>
What processor? I've got the Core i7-980X. I've wondered if this
problem showed up for me because possibly the 12 thread processor
moves through some part of boot setup pretty quickly.
Mine is an Asus Rampage II Extreme with five 500GB drives.
Whatever the reason great thanks to Tejun for fixing it. I keep
wanting to add an 'r' to his last name to get 'Hero'!
Cheers,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-20 21:26 ` Mark Knecht
@ 2010-07-20 23:05 ` Paul Check
0 siblings, 0 replies; 55+ messages in thread
From: Paul Check @ 2010-07-20 23:05 UTC (permalink / raw)
To: Mark Knecht; +Cc: Paul Check, Tejun Heo, Linux Kernel List, linux-ide
Oh, yeah, my processor is the i7 975. That's 4 cores 8 threads, right?
Yes, nice work Tejun, thanks. I'll have to run custom kernels until this
gets fed into Debian. P
> On Tue, Jul 20, 2010 at 2:19 PM, Paul Check <paul@thechecks.ca> wrote:
>> I missed your hardware. I have an ASUS PT 6 Deluxe V2 board with 4
>> drives.
>> I think they are 1TB each, Seagate SATA drives. Â P
>>
>
> What processor? I've got the Core i7-980X. I've wondered if this
> problem showed up for me because possibly the 12 thread processor
> moves through some part of boot setup pretty quickly.
>
> Mine is an Asus Rampage II Extreme with five 500GB drives.
>
> Whatever the reason great thanks to Tejun for fixing it. I keep
> wanting to add an 'r' to his last name to get 'Hero'!
>
> Cheers,
> Mark
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-20 14:14 ` Tejun Heo
(?)
(?)
@ 2010-07-21 20:54 ` Mark Knecht
2010-07-21 21:22 ` Paul Check
2010-07-22 12:39 ` Tejun Heo
-1 siblings, 2 replies; 55+ messages in thread
From: Mark Knecht @ 2010-07-21 20:54 UTC (permalink / raw)
To: Tejun Heo; +Cc: Paul Check, Linux Kernel List, linux-ide
[-- Attachment #1: Type: text/plain, Size: 1551 bytes --]
On Tue, Jul 20, 2010 at 7:14 AM, Tejun Heo <tj@kernel.org> wrote:
> Helo,
>
> On 07/20/2010 05:14 AM, Paul Check wrote:
>> Hey Tejun: I guess this is the same patch that you sent me to fix my issue
>> with missing drives. Good news: I've been through about 10 reboots now
>> and no problems. Based on my prior experience, I'd say with the old
>> setup, 10 clean boots in a row was probably less than a 1% event. So, it
>> seems that this has fixed my problem.
>
> Yeap, it's the same one. I'm forwarding the patch upstream now but,
> Mark, please let me know the test result.
>
> Thanks.
>
> --
> tejun
>
Tejun,
Looks like I had a failure today. First one in weeks and only the
3rd or 4th boot with this newer patch file. One of the two drives
making a RAID0 wasn't found so /dev/md11 (constructed from /dev/sdd
and /dev/sde) couldn't be started. I did a cold reboot and the drive
was found.
If it matters, and it probably doesn't, the failure came on a boot
which had a scheduled fsck to do of /dev/md5 - my main / drive. I
don't see how that would make a difference but I figure why leave the
info out. That's why the times are so much larger in the dmesg file.
(I think)
dmesg attached. I patched the Gentoo kernel if it makes a
difference, same as I did with the earlier patch.
mark@c2stable ~ $ uname -a
Linux c2stable 2.6.34-gentoo-r2 #1 SMP PREEMPT Sun Jul 18 14:09:48 PDT
2010 x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel
GNU/Linux
mark@c2stable ~ $
Sorry,
Mark
[-- Attachment #2: dmesg.Patch-New.COLDTest2 --]
[-- Type: application/octet-stream, Size: 60088 bytes --]
[ 0.000000] Linux version 2.6.34-gentoo-r2 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #1 SMP PREEMPT Sun Jul 18 14:09:48 PDT 2010
[ 0.000000] Command line: root=/dev/md5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask F00000000 write-back
[ 0.000000] 2 base 300000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf780000 page 4k
[ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] 0100000000 - 0340000000 page 1G
[ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000
[ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf798000 00040
[ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x00340000
[ 0.000000] On node 0 totalpages: 3143439
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31
[ 0.000000] Normal zone: 32256 pages used for memmap
[ 0.000000] Normal zone: 2327040 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 12
[ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 48
[ 0.000000] early_res array is doubled to 64 at [14000 - 147ff]
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
[ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072
[ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847
[ 0.000000] Kernel command line: root=/dev/md5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] early_res array is doubled to 128 at [14800 - 157ff]
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (60 early reservations)
[ 0.000000] #1 [0001000000 - 0001771144] TEXT DATA BSS
[ 0.000000] #2 [0001772000 - 0001772298] BRK
[ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved
[ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved
[ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000014000] PGTABLE
[ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM
[ 0.000000] #11 [0001771180 - 0001771780] BOOTMEM
[ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM
[ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM
[ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0
[ 0.000000] #15 [0001771780 - 0001771900] BOOTMEM
[ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM
[ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM
[ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM
[ 0.000000] #19 [0001771900 - 0001771941] BOOTMEM
[ 0.000000] #20 [0001771980 - 0001771a06] BOOTMEM
[ 0.000000] #21 [0001771a40 - 0001771ca8] BOOTMEM
[ 0.000000] #22 [0001771cc0 - 0001771d28] BOOTMEM
[ 0.000000] #23 [0001771d40 - 0001771da8] BOOTMEM
[ 0.000000] #24 [0001771dc0 - 0001771e28] BOOTMEM
[ 0.000000] #25 [0001771e40 - 0001771ea8] BOOTMEM
[ 0.000000] #26 [0001771ec0 - 0001771f28] BOOTMEM
[ 0.000000] #27 [0001771f40 - 0001771fa8] BOOTMEM
[ 0.000000] #28 [00017a32c0 - 00017a3328] BOOTMEM
[ 0.000000] #29 [00017a3340 - 00017a33a8] BOOTMEM
[ 0.000000] #30 [00017a33c0 - 00017a3428] BOOTMEM
[ 0.000000] #31 [00017a3440 - 00017a34a8] BOOTMEM
[ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM
[ 0.000000] #33 [00017a34c0 - 00017a34ce] BOOTMEM
[ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM
[ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM
[ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM
[ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM
[ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM
[ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM
[ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM
[ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM
[ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM
[ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM
[ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM
[ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM
[ 0.000000] #46 [00017a3500 - 00017a3508] BOOTMEM
[ 0.000000] #47 [00017a3540 - 00017a3548] BOOTMEM
[ 0.000000] #48 [00017a3580 - 00017a35b0] BOOTMEM
[ 0.000000] #49 [00017a35c0 - 00017a3620] BOOTMEM
[ 0.000000] #50 [00017a3640 - 00017a3750] BOOTMEM
[ 0.000000] #51 [00017a3780 - 00017a37c8] BOOTMEM
[ 0.000000] #52 [00017a3800 - 00017a3848] BOOTMEM
[ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM
[ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM
[ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM
[ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM
[ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM
[ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM
[ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM
[ 0.000000] Memory: 12302060k/13631488k available (3631k kernel code, 1057732k absent, 271696k reserved, 2957k data, 476k init)
[ 0.000000] Experimental preemptable hierarchical RCU implementation.
[ 0.000000] NR_IRQS:640
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 3337.353 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6674.70 BogoMIPS (lpj=3337353)
[ 0.000294] Security Framework initialized
[ 0.000433] Mount-cache hash table entries: 256
[ 0.000639] CPU: Physical Processor ID: 0
[ 0.000763] CPU: Processor Core ID: 0
[ 0.000890] mce: CPU supports 9 MCE banks
[ 0.001024] CPU0: Thermal monitoring enabled (TM1)
[ 0.001157] using mwait in idle threads.
[ 0.001289] Performance Events: Westmere events, Intel PMU driver.
[ 0.001468] ... version: 3
[ 0.001592] ... bit width: 48
[ 0.001716] ... generic registers: 4
[ 0.001839] ... value mask: 0000ffffffffffff
[ 0.001965] ... max period: 000000007fffffff
[ 0.002091] ... fixed-purpose events: 3
[ 0.002222] ... event mask: 000000070000000f
[ 0.002368] Freeing SMP alternatives: 36k freed
[ 0.002498] ACPI: Core revision 20100121
[ 0.042083] Setting APIC routing to physical flat
[ 0.042644] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052746] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02
[ 0.156794] APIC calibration not consistent with PM-Timer: 102ms instead of 100ms
[ 0.157018] APIC delta adjusted to PM-Timer: 834375 (859394)
[ 0.163145] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok.
[ 1.209335] Brought up 12 CPUs
[ 1.209458] Total of 12 processors activated (81161.31 BogoMIPS).
[ 1.215976] NET: Registered protocol family 16
[ 1.216241] ACPI: bus type pci registered
[ 1.216424] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.216648] PCI: not using MMCONFIG
[ 1.216770] PCI: Using configuration type 1 for base access
[ 1.218809] bio: create slab <bio-0> at 0
[ 1.220117] ACPI: EC: Look up EC in DSDT
[ 1.221257] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.301534] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 1.302370] ACPI: Interpreter enabled
[ 1.302492] ACPI: (supports S0 S5)
[ 1.302668] ACPI: Using IOAPIC for interrupt routing
[ 1.302832] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.304636] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.329099] ACPI: No dock devices found.
[ 1.329224] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.329552] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.329894] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.330025] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.330153] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.330374] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 1.330594] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 1.330815] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 1.331079] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.331081] pci 0000:00:00.0: PME# disabled
[ 1.331124] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.331126] pci 0000:00:01.0: PME# disabled
[ 1.331168] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.331171] pci 0000:00:03.0: PME# disabled
[ 1.331214] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.331216] pci 0000:00:07.0: PME# disabled
[ 1.331384] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f]
[ 1.331437] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
[ 1.331489] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f]
[ 1.331541] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff]
[ 1.331586] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.331590] pci 0000:00:1a.7: PME# disabled
[ 1.331617] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit]
[ 1.331650] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.331653] pci 0000:00:1b.0: PME# disabled
[ 1.331703] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.331706] pci 0000:00:1c.0: PME# disabled
[ 1.331759] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.331762] pci 0000:00:1c.2: PME# disabled
[ 1.331814] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.331817] pci 0000:00:1c.4: PME# disabled
[ 1.331869] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.331871] pci 0000:00:1c.5: PME# disabled
[ 1.331911] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f]
[ 1.331965] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f]
[ 1.332019] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f]
[ 1.332071] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff]
[ 1.332116] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.332119] pci 0000:00:1d.7: PME# disabled
[ 1.332214] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 1.332436] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.332566] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 1.332825] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007]
[ 1.332829] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03]
[ 1.332834] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887]
[ 1.332838] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803]
[ 1.332842] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f]
[ 1.332846] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f]
[ 1.332881] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit]
[ 1.332892] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 1.332922] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007]
[ 1.332926] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03]
[ 1.332931] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887]
[ 1.332935] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803]
[ 1.332939] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f]
[ 1.332943] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f]
[ 1.332995] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.333121] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.333124] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.333127] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.333154] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.333280] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.333283] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.333286] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.333329] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.333335] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[ 1.333339] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff]
[ 1.333346] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref]
[ 1.333360] pci 0000:03:00.0: supports D1 D2
[ 1.333382] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[ 1.333409] pci 0000:03:00.1: supports D1 D2
[ 1.333419] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.333546] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.333548] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.333551] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.333584] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.333710] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.333713] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.333717] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.333782] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.333789] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff]
[ 1.333811] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.333846] pci 0000:06:00.0: supports D1 D2
[ 1.333847] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.333851] pci 0000:06:00.0: PME# disabled
[ 1.333860] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.333989] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.333992] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.333996] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.334094] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
[ 1.334128] pci 0000:05:00.0: PME# supported from D3hot
[ 1.334132] pci 0000:05:00.0: PME# disabled
[ 1.334172] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07]
[ 1.334179] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883]
[ 1.334187] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807]
[ 1.334194] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483]
[ 1.334202] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f]
[ 1.334254] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.334381] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.334384] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.334388] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.334453] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit]
[ 1.334459] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.334482] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref]
[ 1.334517] pci 0000:04:00.0: supports D1 D2
[ 1.334518] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.334522] pci 0000:04:00.0: PME# disabled
[ 1.334531] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.334658] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.334660] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.334665] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.334703] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff]
[ 1.334708] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f]
[ 1.334745] pci 0000:08:02.0: supports D2
[ 1.334746] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
[ 1.334749] pci 0000:08:02.0: PME# disabled
[ 1.334785] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.334915] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.334917] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.334922] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.334923] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.334925] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.334926] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.334928] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 1.334929] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 1.334931] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 1.334955] pci_bus 0000:00: on NUMA node 0
[ 1.334958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.335188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.335263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.335308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.335352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 1.335405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 1.335447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
[ 1.335489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
[ 1.335531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
[ 1.355991] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 1.356475] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 1.356757] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 1.357243] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 1.357725] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 1.358210] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 1.358692] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 1.359178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15)
[ 1.359754] SCSI subsystem initialized
[ 1.359987] libata version 3.00 loaded.
[ 1.360070] usbcore: registered new interface driver usbfs
[ 1.360214] usbcore: registered new interface driver hub
[ 1.360362] usbcore: registered new device driver usb
[ 1.360595] PCI: Using ACPI for IRQ routing
[ 1.360719] PCI: pci_cache_line_size set to 64 bytes
[ 1.360801] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.360803] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff
[ 1.360875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.361126] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.363264] Switching to clocksource tsc
[ 1.363764] pnp: PnP ACPI init
[ 1.363889] ACPI: bus type pnp registered
[ 1.366430] pnp: PnP ACPI: found 17 devices
[ 1.366553] ACPI: ACPI bus type pnp unregistered
[ 1.366682] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 1.366809] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 1.366940] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 1.367067] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 1.367194] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 1.367322] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 1.367451] system 00:07: [io 0x0290-0x029f] has been reserved
[ 1.367579] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.367705] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.367830] system 00:08: [io 0x0500-0x057f] could not be reserved
[ 1.367960] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.368087] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.368214] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.368343] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
[ 1.368472] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.368600] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.368728] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.368857] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.368987] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.369114] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.369241] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.369369] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.374087] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
[ 1.374215] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.374435] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.374655] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.374875] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.375003] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.375127] pci 0000:00:01.0: bridge window [io disabled]
[ 1.375254] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.375379] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.375507] pci 0000:00:03.0: PCI bridge to [bus 02-02]
[ 1.375631] pci 0000:00:03.0: bridge window [io disabled]
[ 1.375758] pci 0000:00:03.0: bridge window [mem disabled]
[ 1.375886] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 1.376014] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[ 1.376139] pci 0000:00:07.0: bridge window [io 0xa000-0xafff]
[ 1.376267] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.376395] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.376616] pci 0000:00:1c.0: PCI bridge to [bus 07-07]
[ 1.376741] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.376870] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
[ 1.377000] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.377222] pci 0000:00:1c.2: PCI bridge to [bus 06-06]
[ 1.377348] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.377475] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.377604] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.377826] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.377953] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 1.378081] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.378209] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.378432] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.378557] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 1.378685] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.378813] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.379037] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
[ 1.379162] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 1.379290] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.379418] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.379552] pci 0000:00:01.0: setting latency timer to 64
[ 1.379557] pci 0000:00:03.0: setting latency timer to 64
[ 1.379562] pci 0000:00:07.0: setting latency timer to 64
[ 1.379567] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 1.379696] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.379824] pci 0000:00:1c.0: setting latency timer to 64
[ 1.379831] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.379961] pci 0000:00:1c.2: setting latency timer to 64
[ 1.379967] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.380095] pci 0000:00:1c.4: setting latency timer to 64
[ 1.380102] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.380230] pci 0000:00:1c.5: setting latency timer to 64
[ 1.380234] pci 0000:00:1e.0: setting latency timer to 64
[ 1.380236] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.380238] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.380239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.380240] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.380242] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.380243] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.380244] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 1.380245] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.380247] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.380248] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 1.380249] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
[ 1.380251] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 1.380252] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.380253] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.380255] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 1.380256] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.380257] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.380259] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 1.380260] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.380261] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.380262] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
[ 1.380264] pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
[ 1.380265] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.380266] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 1.380268] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 1.380269] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.380270] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.380271] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff]
[ 1.380273] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.380313] NET: Registered protocol family 2
[ 1.380485] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.381158] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.381832] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.382067] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.382194] TCP reno registered
[ 1.382316] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.382477] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.382718] NET: Registered protocol family 1
[ 1.382988] RPC: Registered udp transport module.
[ 1.383112] RPC: Registered tcp transport module.
[ 1.383235] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.383497] pci 0000:03:00.0: Boot video device
[ 1.383510] PCI: CLS 256 bytes, default 64
[ 1.383535] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.383662] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000
[ 1.383885] software IO TLB at phys 0xe000000 - 0x12000000
[ 1.386091] VFS: Disk quotas dquot_6.5.2
[ 1.386233] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.386621] NTFS driver 2.1.29 [Flags: R/W].
[ 1.386782] fuse init (API version 7.13)
[ 1.386959] msgmni has been set to 24027
[ 1.387280] alg: No test for stdrng (krng)
[ 1.387431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.387651] io scheduler noop registered
[ 1.387773] io scheduler deadline registered
[ 1.387918] io scheduler cfq registered (default)
[ 1.388105] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.388129] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X
[ 1.388192] pcieport 0000:00:03.0: setting latency timer to 64
[ 1.388215] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X
[ 1.388274] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.388296] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X
[ 1.388358] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.388385] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X
[ 1.388468] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.388495] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X
[ 1.388577] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.388605] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X
[ 1.388687] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.388714] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X
[ 1.388813] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.388818] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.388821] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support
[ 1.390283] Non-volatile memory driver v1.3
[ 1.390497] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.390722] ACPI: Power Button [PWRB]
[ 1.390879] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.391099] ACPI: Power Button [PWRF]
[ 1.391736] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.393020] brd: module loaded
[ 1.393555] loop: module loaded
[ 1.393791] ahci 0000:05:00.0: version 3.0
[ 1.393804] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.404419] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.407263] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.407393] ahci 0000:05:00.0: setting latency timer to 64
[ 1.407474] scsi0 : ahci
[ 1.407673] scsi1 : ahci
[ 1.407865] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
[ 1.408086] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
[ 1.408345] ata_piix 0000:00:1f.2: version 2.13
[ 1.408355] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.408484] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.408753] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.408784] scsi2 : ata_piix
[ 1.408964] scsi3 : ata_piix
[ 1.410344] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20
[ 1.410475] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20
[ 1.410617] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.410748] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.411013] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.411033] scsi4 : ata_piix
[ 1.411212] scsi5 : ata_piix
[ 1.412401] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20
[ 1.412530] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20
[ 1.412742] console [netcon0] enabled
[ 1.412864] netconsole: network logging started
[ 1.413045] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.413182] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.413317] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.413319] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.413484] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.413722] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.417733] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.417741] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000
[ 1.427332] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.427478] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.427607] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.427825] usb usb1: Product: EHCI Host Controller
[ 1.427949] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r2 ehci_hcd
[ 1.428075] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.428269] hub 1-0:1.0: USB hub found
[ 1.428394] hub 1-0:1.0: 6 ports detected
[ 1.428557] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.428692] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.428694] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.428851] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.429085] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.433071] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.433080] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000
[ 1.442291] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.442432] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.442560] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.442779] usb usb2: Product: EHCI Host Controller
[ 1.442903] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r2 ehci_hcd
[ 1.443029] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.443218] hub 2-0:1.0: USB hub found
[ 1.443342] hub 2-0:1.0: 6 ports detected
[ 1.443517] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.443664] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.443807] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.443937] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.443939] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.444099] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.444337] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.444481] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.444611] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.444829] usb usb3: Product: UHCI Host Controller
[ 1.444953] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.445079] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.445269] hub 3-0:1.0: USB hub found
[ 1.445392] hub 3-0:1.0: 2 ports detected
[ 1.445546] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.445676] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.445678] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.445835] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.446077] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
[ 1.446221] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.446348] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.446569] usb usb4: Product: UHCI Host Controller
[ 1.446692] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.446818] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.447007] hub 4-0:1.0: USB hub found
[ 1.447130] hub 4-0:1.0: 2 ports detected
[ 1.447280] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.447411] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.447413] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.447572] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.447815] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
[ 1.447958] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.448085] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.448304] usb usb5: Product: UHCI Host Controller
[ 1.448427] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.448556] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.448746] hub 5-0:1.0: USB hub found
[ 1.448870] hub 5-0:1.0: 2 ports detected
[ 1.449020] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.449150] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.449152] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.449309] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.449549] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
[ 1.449692] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.449819] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.450038] usb usb6: Product: UHCI Host Controller
[ 1.450161] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.450287] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.450477] hub 6-0:1.0: USB hub found
[ 1.450601] hub 6-0:1.0: 2 ports detected
[ 1.450751] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.450881] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.450883] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.451041] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.451278] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
[ 1.451421] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.451551] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.451770] usb usb7: Product: UHCI Host Controller
[ 1.451893] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.452019] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.452209] hub 7-0:1.0: USB hub found
[ 1.452332] hub 7-0:1.0: 2 ports detected
[ 1.452484] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.452614] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.452616] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.452775] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.453012] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
[ 1.453156] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.453283] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.453504] usb usb8: Product: UHCI Host Controller
[ 1.453628] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r2 uhci_hcd
[ 1.453754] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.453941] hub 8-0:1.0: USB hub found
[ 1.454065] hub 8-0:1.0: 2 ports detected
[ 1.454231] Initializing USB Mass Storage driver...
[ 1.454394] usbcore: registered new interface driver usb-storage
[ 1.454522] USB Mass Storage support registered.
[ 1.454682] usbcore: registered new interface driver libusual
[ 1.454859] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.456600] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.456727] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.456903] mice: PS/2 mouse device common for all mice
[ 1.457134] i2c /dev entries driver
[ 1.457297] md: raid0 personality registered for level 0
[ 1.457422] md: raid1 personality registered for level 1
[ 1.457638] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.457861] cpuidle: using governor ladder
[ 1.457984] cpuidle: using governor menu
[ 1.458224] usbcore: registered new interface driver hiddev
[ 1.458377] usbcore: registered new interface driver usbhid
[ 1.458503] usbhid: USB HID core driver
[ 1.458785] TCP cubic registered
[ 1.458907] NET: Registered protocol family 17
[ 1.459428] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.478637] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.711865] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.712656] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.813571] ata3.00: link resume succeeded after 1 retries
[ 1.814362] ata4.00: link resume succeeded after 1 retries
[ 1.926008] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.936654] ata5: SATA link down (SStatus 0 SControl 301)
[ 2.045663] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 2.206454] usb 3-2: New USB device found, idVendor=051d, idProduct=0002
[ 2.206591] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.206719] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1
[ 2.206846] usb 3-2: Manufacturer: American Power Conversion
[ 2.206972] usb 3-2: SerialNumber: 3B1007X44377
[ 2.290341] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0
[ 2.369856] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.369998] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.370855] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.370992] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.375885] ata3.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100
[ 2.376179] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.376316] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.377631] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.377768] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.380746] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133
[ 2.380874] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.383876] ata3.00: configured for UDMA/100
[ 2.387190] ata3.01: configured for UDMA/133
[ 2.387638] ata4.00: configured for UDMA/133
[ 2.391405] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5
[ 2.391778] ata4.01: configured for UDMA/133
[ 2.396328] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.396557] Uniform CD-ROM driver Revision: 3.20
[ 2.396763] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.396822] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.397016] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.397350] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.397384] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 2.397463] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.397564] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.397590] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.397591] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.397598] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.397603] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.397672] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5
[ 2.397683] sdb:
[ 2.397799] sd 3:0:1:0: Attached scsi generic sg3 type 0
[ 2.399106] sd 2:0:1:0: [sda] Write Protect is off
[ 2.399231] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 2.399243] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.399528] sda: sdb1 sdb2 sdb3 sdb4 < sdb5
[ 2.414290] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.416844] sda1 sda2 sda3 sda4 < sda5 sdb6 >
[ 2.435281] sda6 >
[ 2.446086] sd 3:0:1:0: [sdc] Write Protect is off
[ 2.446211] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.446228] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.446252] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.446638] sdc:
[ 2.448224] sd 2:0:1:0: [sda] Attached SCSI disk
[ 2.464171] sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
[ 2.495435] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.502292] sd 3:0:1:0: [sdc] Attached SCSI disk
[ 2.665926] usb 8-2: New USB device found, idVendor=045e, idProduct=0039
[ 2.666064] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.666192] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
[ 2.666320] usb 8-2: Manufacturer: Microsoft
[ 2.684025] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3
[ 2.684332] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0
[ 4.581655] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 4.589320] md: Waiting for all devices to be available before autodetect
[ 4.589456] md: If you don't use raid, use raid=noautodetect
[ 4.589669] md: Autodetecting RAID arrays.
[ 4.642701] md: Scanned 6 and added 6 devices.
[ 4.642832] md: autorun ...
[ 4.642953] md: considering sdc5 ...
[ 4.643078] md: adding sdc5 ...
[ 4.643200] md: sdc3 has different UUID to sdc5
[ 4.643325] md: adding sda5 ...
[ 4.643447] md: sda3 has different UUID to sdc5
[ 4.643572] md: adding sdb5 ...
[ 4.643697] md: sdb3 has different UUID to sdc5
[ 4.643903] md: created md5
[ 4.644025] md: bind<sdb5>
[ 4.644149] md: bind<sda5>
[ 4.644274] md: bind<sdc5>
[ 4.644398] md: running: <sdc5><sda5><sdb5>
[ 4.644696] raid1: raid set md5 active with 3 out of 3 mirrors
[ 4.644833] md5: detected capacity change from 0 to 53694496768
[ 4.644982] md: considering sdc3 ...
[ 4.645106] md: adding sdc3 ...
[ 4.645229] md: adding sda3 ...
[ 4.645352] md: adding sdb3 ...
[ 4.645554] md: created md3
[ 4.645679] md: bind<sdb3>
[ 4.645804] md: bind<sda3>
[ 4.645929] md: bind<sdc3>
[ 4.646053] md: running: <sdc3><sda3><sdb3>
[ 4.646337] raid1: raid set md3 active with 3 out of 3 mirrors
[ 4.646473] md3: detected capacity change from 0 to 53694562304
[ 4.646623] md: ... autorun DONE.
[ 4.646781] md5: unknown partition table
[ 4.689384] kjournald starting. Commit interval 5 seconds
[ 4.689391] EXT3-fs (md5): mounted filesystem with writeback data mode
[ 4.689401] VFS: Mounted root (ext3 filesystem) readonly on device 9:5.
[ 4.689776] Freeing unused kernel memory: 476k freed
[ 4.689951] Write protecting the kernel read-only data: 6144k
[ 4.690158] Freeing unused kernel memory: 448k freed
[ 4.690351] Freeing unused kernel memory: 248k freed
[ 6.704488] udev: starting version 149
[ 6.889873] rtc_cmos 00:03: RTC can wake from S4
[ 6.889905] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.889929] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.898693] sky2: driver version 1.27
[ 6.898721] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.898735] sky2 0000:06:00.0: setting latency timer to 64
[ 6.898766] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.898850] sky2 0000:06:00.0: irq 55 for MSI/MSI-X
[ 6.899025] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09
[ 6.899038] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.899045] sky2 0000:04:00.0: setting latency timer to 64
[ 6.899061] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.899141] sky2 0000:04:00.0: irq 56 for MSI/MSI-X
[ 6.899309] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd
[ 7.070023] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.070027] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f pref window disabled]
[ 7.070028] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.167789] md3: unknown partition table
[ 7.264127] Linux agpgart interface v0.103
[ 7.328685] [drm] Initialized drm 1.1.0 20060810
[ 7.396947] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.397081] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X
[ 7.397103] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.736739] [drm] radeon defaulting to kernel modesetting.
[ 7.736740] [drm] radeon kernel modesetting enabled.
[ 7.736776] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 7.736779] radeon 0000:03:00.0: setting latency timer to 64
[ 7.737491] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8).
[ 7.737630] [drm] register mmio base: 0xFBAC0000
[ 7.737632] [drm] register mmio size: 131072
[ 7.737710] ATOM BIOS: JUNIPER
[ 7.737719] [drm] Clocks initialized !
[ 7.737720] [drm] 1 Power State(s)
[ 7.737721] [drm] State 0 Default (default)
[ 7.737722] [drm] 16 PCIE Lanes
[ 7.737723] [drm] 1 Clock Mode(s)
[ 7.737724] [drm] 0 engine/memory: 850000/1200000
[ 7.737727] [drm] radeon: power management initialized
[ 7.737733] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used)
[ 7.737735] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF
[ 7.737745] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 7.737746] [drm] Detected VRAM RAM=256M, BAR=256M
[ 7.737747] [drm] RAM width 128bits DDR
[ 7.737770] [TTM] Zone kernel: Available graphics memory: 6151634 kiB.
[ 7.737771] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 7.737779] [drm] radeon: 256M of VRAM memory ready
[ 7.737780] [drm] radeon: 512M of GTT memory ready.
[ 7.739128] [drm] Radeon Display Connectors
[ 7.739130] [drm] Connector 0:
[ 7.739131] [drm] DisplayPort
[ 7.739133] [drm] HPD4
[ 7.739135] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 7.739136] [drm] Encoders:
[ 7.739138] [drm] DFP1: INTERNAL_UNIPHY2
[ 7.739139] [drm] Connector 1:
[ 7.739141] [drm] HDMI-A
[ 7.739142] [drm] HPD5
[ 7.739144] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 7.739145] [drm] Encoders:
[ 7.739147] [drm] DFP2: INTERNAL_UNIPHY2
[ 7.739148] [drm] Connector 2:
[ 7.739149] [drm] DVI-I
[ 7.739151] [drm] HPD1
[ 7.739152] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 7.739154] [drm] Encoders:
[ 7.739155] [drm] DFP3: INTERNAL_UNIPHY1
[ 7.739156] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 7.739158] [drm] Connector 3:
[ 7.739159] [drm] DVI-I
[ 7.739160] [drm] HPD6
[ 7.739161] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 7.739163] [drm] Encoders:
[ 7.739164] [drm] DFP4: INTERNAL_UNIPHY
[ 7.739164] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.898601] hda_codec: AD1989B: BIOS auto-probing.
[ 8.108262] [drm] fb mappable at 0xD0040000
[ 8.108264] [drm] vram apper at 0xD0000000
[ 8.108265] [drm] size 8294400
[ 8.108266] [drm] fb depth is 24
[ 8.108266] [drm] pitch is 7680
[ 8.116100] Console: switching to colour frame buffer device 240x67
[ 8.119983] fb0: radeondrmfb frame buffer device
[ 8.119984] registered panic notifier
[ 8.119987] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0
[ 8.120010] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
[ 8.120048] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X
[ 8.120066] HDA Intel 0000:03:00.1: setting latency timer to 64
[ 161.338186] EXT3-fs (md5): using internal journal
[ 161.789257] md: md6 stopped.
[ 161.812486] md: bind<sdb6>
[ 161.812648] md: bind<sdc6>
[ 161.812812] md: bind<sda6>
[ 161.813397] raid1: raid set md6 active with 3 out of 3 mirrors
[ 161.813408] md6: detected capacity change from 0 to 253354939392
[ 161.813905] md6: unknown partition table
[ 162.213714] kjournald starting. Commit interval 5 seconds
[ 162.213721] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended
[ 162.230090] EXT3-fs (md6): using internal journal
[ 162.230096] EXT3-fs (md6): mounted filesystem with writeback data mode
[ 162.276407] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k
[ 162.277805] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k
[ 162.279153] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k
[ 166.570078] sky2 0000:06:00.0: eth0: enabling interface
[ 168.506160] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 173.137782] NET: Registered protocol family 10
[ 174.739049] /dev/vmmon[4139]: Module vmmon: registered with major=10 minor=165
[ 174.739057] /dev/vmmon[4139]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 174.739064] /dev/vmmon[4139]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 174.739066] /dev/vmmon[4139]: Module vmmon: initialized
[ 174.768427] /dev/vmci[4158]: VMCI: Driver initialized.
[ 174.768442] /dev/vmci[4158]: Module vmci: registered with major=10 minor=59
[ 174.768444] /dev/vmci[4158]: Module vmci: initialized
[ 175.057926] /dev/vmnet: open called by PID 4240 (vmnet-bridge)
[ 175.057932] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 175.057951] /dev/vmnet: port on hub 0 successfully opened
[ 175.057962] bridge-eth0: up
[ 175.057964] bridge-eth0: attached
[ 176.232410] /dev/vmnet: open called by PID 4247 (vmnet-dhcpd)
[ 176.232414] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 176.232433] /dev/vmnet: port on hub 1 successfully opened
[ 176.266899] /dev/vmnet: open called by PID 4249 (vmnet-netifup)
[ 176.266904] /dev/vmnet: port on hub 1 successfully opened
[ 176.299822] /dev/vmnet: open called by PID 4252 (vmnet-dhcpd)
[ 176.299827] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 176.299846] /dev/vmnet: port on hub 8 successfully opened
[ 176.390544] /dev/vmnet: open called by PID 4256 (vmnet-natd)
[ 176.390550] /dev/vmnet: port on hub 8 successfully opened
[ 176.395983] /dev/vmnet: open called by PID 4257 (vmnet-netifup)
[ 176.395989] /dev/vmnet: port on hub 8 successfully opened
[ 183.926146] eth0: no IPv6 routers present
[ 186.331298] vmnet1: no IPv6 routers present
[ 187.247829] vmnet8: no IPv6 routers present
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-21 20:54 ` Mark Knecht
@ 2010-07-21 21:22 ` Paul Check
2010-07-22 12:39 ` Tejun Heo
1 sibling, 0 replies; 55+ messages in thread
From: Paul Check @ 2010-07-21 21:22 UTC (permalink / raw)
To: Mark Knecht; +Cc: Tejun Heo, Linux Kernel List, linux-ide
That's unfortunate. FYI I have continued to be trouble free, but my
processor is a bit weaker than Mark's, although I would find it surprising
that this would cause a problem. Also, FYI Mark, I have 12GB of Corsair
RAM, and have it bumped up to the Intel XMP profile.
P
> On Tue, Jul 20, 2010 at 7:14 AM, Tejun Heo <tj@kernel.org> wrote:
>> Helo,
>>
>> On 07/20/2010 05:14 AM, Paul Check wrote:
>>> Hey Tejun: I guess this is the same patch that you sent me to fix my
>>> issue
>>> with missing drives. Â Good news: I've been through about 10 reboots
>>> now
>>> and no problems. Â Based on my prior experience, I'd say with the old
>>> setup, 10 clean boots in a row was probably less than a 1% event. Â So,
>>> it
>>> seems that this has fixed my problem.
>>
>> Yeap, it's the same one. Â I'm forwarding the patch upstream now but,
>> Mark, please let me know the test result.
>>
>> Thanks.
>>
>> --
>> tejun
>>
>
> Tejun,
> Looks like I had a failure today. First one in weeks and only the
> 3rd or 4th boot with this newer patch file. One of the two drives
> making a RAID0 wasn't found so /dev/md11 (constructed from /dev/sdd
> and /dev/sde) couldn't be started. I did a cold reboot and the drive
> was found.
>
> If it matters, and it probably doesn't, the failure came on a boot
> which had a scheduled fsck to do of /dev/md5 - my main / drive. I
> don't see how that would make a difference but I figure why leave the
> info out. That's why the times are so much larger in the dmesg file.
> (I think)
>
> dmesg attached. I patched the Gentoo kernel if it makes a
> difference, same as I did with the earlier patch.
>
> mark@c2stable ~ $ uname -a
> Linux c2stable 2.6.34-gentoo-r2 #1 SMP PREEMPT Sun Jul 18 14:09:48 PDT
> 2010 x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel
> GNU/Linux
> mark@c2stable ~ $
>
> Sorry,
> Mark
>
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-21 20:54 ` Mark Knecht
@ 2010-07-22 12:39 ` Tejun Heo
2010-07-22 12:39 ` Tejun Heo
1 sibling, 0 replies; 55+ messages in thread
From: Tejun Heo @ 2010-07-22 12:39 UTC (permalink / raw)
To: Mark Knecht; +Cc: Paul Check, Linux Kernel List, linux-ide
Hello,
On 07/21/2010 10:54 PM, Mark Knecht wrote:
> Looks like I had a failure today. First one in weeks and only the
> 3rd or 4th boot with this newer patch file. One of the two drives
> making a RAID0 wasn't found so /dev/md11 (constructed from /dev/sdd
> and /dev/sde) couldn't be started. I did a cold reboot and the drive
> was found.
>
> If it matters, and it probably doesn't, the failure came on a boot
> which had a scheduled fsck to do of /dev/md5 - my main / drive. I
> don't see how that would make a difference but I figure why leave the
> info out. That's why the times are so much larger in the dmesg file.
> (I think)
>
> dmesg attached. I patched the Gentoo kernel if it makes a
> difference, same as I did with the earlier patch.
>
> mark@c2stable ~ $ uname -a
> Linux c2stable 2.6.34-gentoo-r2 #1 SMP PREEMPT Sun Jul 18 14:09:48 PDT
> 2010 x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel
> GNU/Linux
> mark@c2stable ~ $
Hmmm... that's weird. Can you please make sure the patch is actually
applied? Adding a printk("XXX patch applied!\n") near other changes
usually is easy enough. Also, can you please apply resume-dbg-1.patch
too and reproduce the failure and post log?
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
@ 2010-07-22 12:39 ` Tejun Heo
0 siblings, 0 replies; 55+ messages in thread
From: Tejun Heo @ 2010-07-22 12:39 UTC (permalink / raw)
To: Mark Knecht; +Cc: Paul Check, Linux Kernel List, linux-ide
Hello,
On 07/21/2010 10:54 PM, Mark Knecht wrote:
> Looks like I had a failure today. First one in weeks and only the
> 3rd or 4th boot with this newer patch file. One of the two drives
> making a RAID0 wasn't found so /dev/md11 (constructed from /dev/sdd
> and /dev/sde) couldn't be started. I did a cold reboot and the drive
> was found.
>
> If it matters, and it probably doesn't, the failure came on a boot
> which had a scheduled fsck to do of /dev/md5 - my main / drive. I
> don't see how that would make a difference but I figure why leave the
> info out. That's why the times are so much larger in the dmesg file.
> (I think)
>
> dmesg attached. I patched the Gentoo kernel if it makes a
> difference, same as I did with the earlier patch.
>
> mark@c2stable ~ $ uname -a
> Linux c2stable 2.6.34-gentoo-r2 #1 SMP PREEMPT Sun Jul 18 14:09:48 PDT
> 2010 x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel
> GNU/Linux
> mark@c2stable ~ $
Hmmm... that's weird. Can you please make sure the patch is actually
applied? Adding a printk("XXX patch applied!\n") near other changes
usually is easy enough. Also, can you please apply resume-dbg-1.patch
too and reproduce the failure and post log?
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-07-22 12:39 ` Tejun Heo
(?)
@ 2010-08-02 22:07 ` Mark Knecht
2010-08-03 18:41 ` Randy Dunlap
-1 siblings, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-08-02 22:07 UTC (permalink / raw)
To: Tejun Heo; +Cc: Paul Check, Linux Kernel List, linux-ide
On Thu, Jul 22, 2010 at 5:39 AM, Tejun Heo <tj@kernel.org> wrote:
> Hello,
>
> On 07/21/2010 10:54 PM, Mark Knecht wrote:
>> Looks like I had a failure today. First one in weeks and only the
>> 3rd or 4th boot with this newer patch file. One of the two drives
>> making a RAID0 wasn't found so /dev/md11 (constructed from /dev/sdd
>> and /dev/sde) couldn't be started. I did a cold reboot and the drive
>> was found.
>>
>> If it matters, and it probably doesn't, the failure came on a boot
>> which had a scheduled fsck to do of /dev/md5 - my main / drive. I
>> don't see how that would make a difference but I figure why leave the
>> info out. That's why the times are so much larger in the dmesg file.
>> (I think)
>>
>> dmesg attached. I patched the Gentoo kernel if it makes a
>> difference, same as I did with the earlier patch.
>>
>> mark@c2stable ~ $ uname -a
>> Linux c2stable 2.6.34-gentoo-r2 #1 SMP PREEMPT Sun Jul 18 14:09:48 PDT
>> 2010 x86_64 Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz GenuineIntel
>> GNU/Linux
>> mark@c2stable ~ $
>
> Hmmm... that's weird. Can you please make sure the patch is actually
> applied? Adding a printk("XXX patch applied!\n") near other changes
> usually is easy enough. Also, can you please apply resume-dbg-1.patch
> too and reproduce the failure and post log?
>
> Thanks.
>
> --
> tejun
>
Hi Tejun,
I'm finally home and trying to get back to this. I'm really a bad
programmer so I don't know what I've done wrong but it seems patch
isn't happy with me.
c2stable linux # patch --dry-run -p1 <../ata_piix-sidpr-lock.patch
patching file drivers/ata/ata_piix.c
patch: **** malformed patch at line 13:
c2stable linux #
Here's the change I tried to make to a copy of the file:
c2stable linux # cat ../ata_piix-sidpr-lock.patch
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 7409f98..3971bc0 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -158,6 +158,7 @@ struct piix_map_db {
struct piix_host_priv {
const int *map;
u32 saved_iocfg;
+ spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */
+ printk("MWK - ata_sidpr patch applied!\n");
void __iomem *sidpr;
};
@@ -951,12 +952,15 @@ static int piix_sidpr_scr_read(struct ata_link *link,
unsigned int reg, u32 *val)
{
struct piix_host_priv *hpriv = link->ap->host->private_data;
+ unsigned long flags;
if (reg >= ARRAY_SIZE(piix_sidx_map))
return -EINVAL;
+ spin_lock_irqsave(&hpriv->sidpr_lock, flags);
piix_sidpr_sel(link, reg);
*val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
+ spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
return 0;
}
@@ -964,12 +968,15 @@ static int piix_sidpr_scr_write(struct ata_link *link,
unsigned int reg, u32 val)
{
struct piix_host_priv *hpriv = link->ap->host->private_data;
+ unsigned long flags;
if (reg >= ARRAY_SIZE(piix_sidx_map))
return -EINVAL;
+ spin_lock_irqsave(&hpriv->sidpr_lock, flags);
piix_sidpr_sel(link, reg);
iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
+ spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
return 0;
}
@@ -1566,6 +1573,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
+ spin_lock_init(&hpriv->sidpr_lock);
/* Save IOCFG, this will be used for cable detection, quirk
* detection and restoration on detach. This is necessary
c2stable linux #
Maybe you can shoot back something that's done correctly and I'll
start testing.
I've tried booting a few times. I've had 3 cold boot failures so
far. No warm boot failures. Each time it failed on cold boot a warm
boot fixed it.
Thanks,
Mark
^ permalink raw reply related [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-08-02 22:07 ` Mark Knecht
@ 2010-08-03 18:41 ` Randy Dunlap
2010-08-03 18:47 ` Mark Knecht
2010-08-03 18:49 ` Jim Paris
0 siblings, 2 replies; 55+ messages in thread
From: Randy Dunlap @ 2010-08-03 18:41 UTC (permalink / raw)
To: Mark Knecht; +Cc: Tejun Heo, Paul Check, Linux Kernel List, linux-ide
On Mon, 2 Aug 2010 15:07:11 -0700 Mark Knecht wrote:
> On Thu, Jul 22, 2010 at 5:39 AM, Tejun Heo <tj@kernel.org> wrote:
>
> Hi Tejun,
> I'm finally home and trying to get back to this. I'm really a bad
> programmer so I don't know what I've done wrong but it seems patch
> isn't happy with me.
>
> c2stable linux # patch --dry-run -p1 <../ata_piix-sidpr-lock.patch
> patching file drivers/ata/ata_piix.c
> patch: **** malformed patch at line 13:
Whenever the patch file was saved on this system, line 13 of it was
split (probably by an email client). Whenever I see this, I just
join (merge) that line and the next one and try again... sometimes
several lines are malformed and have to be fixed like this.
>
> c2stable linux #
>
> Here's the change I tried to make to a copy of the file:
>
> c2stable linux # cat ../ata_piix-sidpr-lock.patch
> diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
> index 7409f98..3971bc0 100644
> --- a/drivers/ata/ata_piix.c
> +++ b/drivers/ata/ata_piix.c
> @@ -158,6 +158,7 @@ struct piix_map_db {
> struct piix_host_priv {
> const int *map;
> u32 saved_iocfg;
> + spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */
> + printk("MWK - ata_sidpr patch applied!\n");
> void __iomem *sidpr;
> };
>
> @@ -951,12 +952,15 @@ static int piix_sidpr_scr_read(struct ata_link *link,
> unsigned int reg, u32 *val)
> {
> struct piix_host_priv *hpriv = link->ap->host->private_data;
> + unsigned long flags;
>
> if (reg >= ARRAY_SIZE(piix_sidx_map))
> return -EINVAL;
>
> + spin_lock_irqsave(&hpriv->sidpr_lock, flags);
> piix_sidpr_sel(link, reg);
> *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
> + spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
> return 0;
> }
>
> @@ -964,12 +968,15 @@ static int piix_sidpr_scr_write(struct ata_link *link,
> unsigned int reg, u32 val)
> {
> struct piix_host_priv *hpriv = link->ap->host->private_data;
> + unsigned long flags;
>
> if (reg >= ARRAY_SIZE(piix_sidx_map))
> return -EINVAL;
>
> + spin_lock_irqsave(&hpriv->sidpr_lock, flags);
> piix_sidpr_sel(link, reg);
> iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
> + spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
> return 0;
> }
>
> @@ -1566,6 +1573,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
> hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
> if (!hpriv)
> return -ENOMEM;
> + spin_lock_init(&hpriv->sidpr_lock);
>
> /* Save IOCFG, this will be used for cable detection, quirk
> * detection and restoration on detach. This is necessary
> c2stable linux #
>
> Maybe you can shoot back something that's done correctly and I'll
> start testing.
>
> I've tried booting a few times. I've had 3 cold boot failures so
> far. No warm boot failures. Each time it failed on cold boot a warm
> boot fixed it.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-08-03 18:41 ` Randy Dunlap
@ 2010-08-03 18:47 ` Mark Knecht
2010-08-03 18:55 ` Randy Dunlap
2010-08-03 18:49 ` Jim Paris
1 sibling, 1 reply; 55+ messages in thread
From: Mark Knecht @ 2010-08-03 18:47 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Tejun Heo, Paul Check, Linux Kernel List, linux-ide
On Tue, Aug 3, 2010 at 11:41 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
> On Mon, 2 Aug 2010 15:07:11 -0700 Mark Knecht wrote:
>
>> On Thu, Jul 22, 2010 at 5:39 AM, Tejun Heo <tj@kernel.org> wrote:
>>
>> Hi Tejun,
>> I'm finally home and trying to get back to this. I'm really a bad
>> programmer so I don't know what I've done wrong but it seems patch
>> isn't happy with me.
>>
>> c2stable linux # patch --dry-run -p1 <../ata_piix-sidpr-lock.patch
>> patching file drivers/ata/ata_piix.c
>> patch: **** malformed patch at line 13:
>
> Whenever the patch file was saved on this system, line 13 of it was
> split (probably by an email client). Whenever I see this, I just
> join (merge) that line and the next one and try again... sometimes
> several lines are malformed and have to be fixed like this.
>
Randy,
Could very well be what happened. I added line 13 (the printk) by hand
<SNIP - ORIGINAL PATCH FILE>
struct piix_host_priv {
const int *map;
u32 saved_iocfg;
+ spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */
void __iomem *sidpr;
};
<SNIP - MY CHANGE BY HAND>
struct piix_host_priv {
const int *map;
u32 saved_iocfg;
+ spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */
+ printk("MWK - ata_sidpr patch applied!\n");
void __iomem *sidpr;
};
Maybe I should have just put it on the same line as the previous
spinlock command?
I'll play with it and see if I can get it working.
Thanks,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-08-03 18:41 ` Randy Dunlap
2010-08-03 18:47 ` Mark Knecht
@ 2010-08-03 18:49 ` Jim Paris
2010-08-03 18:53 ` Mark Knecht
1 sibling, 1 reply; 55+ messages in thread
From: Jim Paris @ 2010-08-03 18:49 UTC (permalink / raw)
To: Randy Dunlap
Cc: Mark Knecht, Tejun Heo, Paul Check, Linux Kernel List, linux-ide
Randy Dunlap wrote:
> On Mon, 2 Aug 2010 15:07:11 -0700 Mark Knecht wrote:
>
> > On Thu, Jul 22, 2010 at 5:39 AM, Tejun Heo <tj@kernel.org> wrote:
> >
> > Hi Tejun,
> > I'm finally home and trying to get back to this. I'm really a bad
> > programmer so I don't know what I've done wrong but it seems patch
> > isn't happy with me.
> >
> > c2stable linux # patch --dry-run -p1 <../ata_piix-sidpr-lock.patch
> > patching file drivers/ata/ata_piix.c
> > patch: **** malformed patch at line 13:
>
> Whenever the patch file was saved on this system, line 13 of it was
> split (probably by an email client). Whenever I see this, I just
> join (merge) that line and the next one and try again... sometimes
> several lines are malformed and have to be fixed like this.
Tejun asked Mark to add a printk, and Mark added it directly to the
patch. Mark, just apply the original patch as-is, and then add the
printk to the source code in ata_piix.c. You should add it somewhere
like the piix_init_one function, e.g. right before the "Save IOCFG"
comment around line 1575.
-jim
>
> >
> > c2stable linux #
> >
> > Here's the change I tried to make to a copy of the file:
> >
> > c2stable linux # cat ../ata_piix-sidpr-lock.patch
> > diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
> > index 7409f98..3971bc0 100644
> > --- a/drivers/ata/ata_piix.c
> > +++ b/drivers/ata/ata_piix.c
> > @@ -158,6 +158,7 @@ struct piix_map_db {
> > struct piix_host_priv {
> > const int *map;
> > u32 saved_iocfg;
> > + spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */
> > + printk("MWK - ata_sidpr patch applied!\n");
> > void __iomem *sidpr;
> > };
> >
> > @@ -951,12 +952,15 @@ static int piix_sidpr_scr_read(struct ata_link *link,
> > unsigned int reg, u32 *val)
> > {
> > struct piix_host_priv *hpriv = link->ap->host->private_data;
> > + unsigned long flags;
> >
> > if (reg >= ARRAY_SIZE(piix_sidx_map))
> > return -EINVAL;
> >
> > + spin_lock_irqsave(&hpriv->sidpr_lock, flags);
> > piix_sidpr_sel(link, reg);
> > *val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
> > + spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
> > return 0;
> > }
> >
> > @@ -964,12 +968,15 @@ static int piix_sidpr_scr_write(struct ata_link *link,
> > unsigned int reg, u32 val)
> > {
> > struct piix_host_priv *hpriv = link->ap->host->private_data;
> > + unsigned long flags;
> >
> > if (reg >= ARRAY_SIZE(piix_sidx_map))
> > return -EINVAL;
> >
> > + spin_lock_irqsave(&hpriv->sidpr_lock, flags);
> > piix_sidpr_sel(link, reg);
> > iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
> > + spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
> > return 0;
> > }
> >
> > @@ -1566,6 +1573,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
> > hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
> > if (!hpriv)
> > return -ENOMEM;
> > + spin_lock_init(&hpriv->sidpr_lock);
> >
> > /* Save IOCFG, this will be used for cable detection, quirk
> > * detection and restoration on detach. This is necessary
> > c2stable linux #
> >
> > Maybe you can shoot back something that's done correctly and I'll
> > start testing.
> >
> > I've tried booting a few times. I've had 3 cold boot failures so
> > far. No warm boot failures. Each time it failed on cold boot a warm
> > boot fixed it.
>
>
> ---
> ~Randy
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-08-03 18:49 ` Jim Paris
@ 2010-08-03 18:53 ` Mark Knecht
0 siblings, 0 replies; 55+ messages in thread
From: Mark Knecht @ 2010-08-03 18:53 UTC (permalink / raw)
To: Jim Paris
Cc: Randy Dunlap, Tejun Heo, Paul Check, Linux Kernel List, linux-ide
On Tue, Aug 3, 2010 at 11:49 AM, Jim Paris <jim@jtan.com> wrote:
> Randy Dunlap wrote:
>> On Mon, 2 Aug 2010 15:07:11 -0700 Mark Knecht wrote:
>>
>> > On Thu, Jul 22, 2010 at 5:39 AM, Tejun Heo <tj@kernel.org> wrote:
>> >
>> > Hi Tejun,
>> > I'm finally home and trying to get back to this. I'm really a bad
>> > programmer so I don't know what I've done wrong but it seems patch
>> > isn't happy with me.
>> >
>> > c2stable linux # patch --dry-run -p1 <../ata_piix-sidpr-lock.patch
>> > patching file drivers/ata/ata_piix.c
>> > patch: **** malformed patch at line 13:
>>
>> Whenever the patch file was saved on this system, line 13 of it was
>> split (probably by an email client). Whenever I see this, I just
>> join (merge) that line and the next one and try again... sometimes
>> several lines are malformed and have to be fixed like this.
>
> Tejun asked Mark to add a printk, and Mark added it directly to the
> patch. Mark, just apply the original patch as-is, and then add the
> printk to the source code in ata_piix.c. You should add it somewhere
> like the piix_init_one function, e.g. right before the "Save IOCFG"
> comment around line 1575.
>
> -jim
Thanks Jim. I'll give it a shot.
Cheers,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-08-03 18:47 ` Mark Knecht
@ 2010-08-03 18:55 ` Randy Dunlap
2010-08-04 16:16 ` Mark Knecht
0 siblings, 1 reply; 55+ messages in thread
From: Randy Dunlap @ 2010-08-03 18:55 UTC (permalink / raw)
To: Mark Knecht; +Cc: Tejun Heo, Paul Check, Linux Kernel List, linux-ide
On Tue, 3 Aug 2010 11:47:25 -0700 Mark Knecht wrote:
> On Tue, Aug 3, 2010 at 11:41 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
> > On Mon, 2 Aug 2010 15:07:11 -0700 Mark Knecht wrote:
> >
> >> On Thu, Jul 22, 2010 at 5:39 AM, Tejun Heo <tj@kernel.org> wrote:
> >>
> >> Hi Tejun,
> >> I'm finally home and trying to get back to this. I'm really a bad
> >> programmer so I don't know what I've done wrong but it seems patch
> >> isn't happy with me.
> >>
> >> c2stable linux # patch --dry-run -p1 <../ata_piix-sidpr-lock.patch
> >> patching file drivers/ata/ata_piix.c
> >> patch: **** malformed patch at line 13:
> >
> > Whenever the patch file was saved on this system, line 13 of it was
> > split (probably by an email client). Whenever I see this, I just
> > join (merge) that line and the next one and try again... sometimes
> > several lines are malformed and have to be fixed like this.
> >
>
> Randy,
> Could very well be what happened. I added line 13 (the printk) by hand
>
> <SNIP - ORIGINAL PATCH FILE>
> struct piix_host_priv {
> const int *map;
> u32 saved_iocfg;
> + spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */
> void __iomem *sidpr;
> };
>
> <SNIP - MY CHANGE BY HAND>
> struct piix_host_priv {
> const int *map;
> u32 saved_iocfg;
> + spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */
> + printk("MWK - ata_sidpr patch applied!\n");
> void __iomem *sidpr;
> };
>
> Maybe I should have just put it on the same line as the previous
> spinlock command?
>
> I'll play with it and see if I can get it working.
Ah, so you added a line to a patch file. That means that the patch
block header must be changed from something like this:
@@ -964,12 +968,15 @@
to like this:
@@ -964,12 +968,16 @@
Any text following the second "@@" is just a comment so it does not matter.
The ,12 ,15 ,16 are all line counts. The ",12" is the number of lines
in the before version of the patch. The ",15" or ",16" is the number of lines
in the after version of the patch, so you would need to increase it by 1 if
you added one line. Or you can just put the printk on the same line as another
part of the patch and it won't matter. :)
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 55+ messages in thread
* Re: Drives missing at boot
2010-08-03 18:55 ` Randy Dunlap
@ 2010-08-04 16:16 ` Mark Knecht
0 siblings, 0 replies; 55+ messages in thread
From: Mark Knecht @ 2010-08-04 16:16 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Tejun Heo, Paul Check, Linux Kernel List, linux-ide
On Tue, Aug 3, 2010 at 11:55 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
> On Tue, 3 Aug 2010 11:47:25 -0700 Mark Knecht wrote:
>
>> On Tue, Aug 3, 2010 at 11:41 AM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
>> > On Mon, 2 Aug 2010 15:07:11 -0700 Mark Knecht wrote:
>> >
>> >> On Thu, Jul 22, 2010 at 5:39 AM, Tejun Heo <tj@kernel.org> wrote:
>> >>
>> >> Hi Tejun,
>> >> I'm finally home and trying to get back to this. I'm really a bad
>> >> programmer so I don't know what I've done wrong but it seems patch
>> >> isn't happy with me.
>> >>
>> >> c2stable linux # patch --dry-run -p1 <../ata_piix-sidpr-lock.patch
>> >> patching file drivers/ata/ata_piix.c
>> >> patch: **** malformed patch at line 13:
>> >
>> > Whenever the patch file was saved on this system, line 13 of it was
>> > split (probably by an email client). Whenever I see this, I just
>> > join (merge) that line and the next one and try again... sometimes
>> > several lines are malformed and have to be fixed like this.
>> >
>>
>> Randy,
>> Could very well be what happened. I added line 13 (the printk) by hand
>>
>> <SNIP - ORIGINAL PATCH FILE>
>> struct piix_host_priv {
>> const int *map;
>> u32 saved_iocfg;
>> + spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */
>> void __iomem *sidpr;
>> };
>>
>> <SNIP - MY CHANGE BY HAND>
>> struct piix_host_priv {
>> const int *map;
>> u32 saved_iocfg;
>> + spinlock_t sidpr_lock; /* FIXME: remove once locking in EH is fixed */
>> + printk("MWK - ata_sidpr patch applied!\n");
>> void __iomem *sidpr;
>> };
>>
>> Maybe I should have just put it on the same line as the previous
>> spinlock command?
>>
>> I'll play with it and see if I can get it working.
>
>
> Ah, so you added a line to a patch file. That means that the patch
> block header must be changed from something like this:
>
> @@ -964,12 +968,15 @@
>
> to like this:
>
> @@ -964,12 +968,16 @@
>
> Any text following the second "@@" is just a comment so it does not matter.
>
> The ,12 ,15 ,16 are all line counts. The ",12" is the number of lines
> in the before version of the patch. The ",15" or ",16" is the number of lines
> in the after version of the patch, so you would need to increase it by 1 if
> you added one line. Or you can just put the printk on the same line as another
> part of the patch and it won't matter. :)
>
>
> ---
> ~Randy
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
>
Thanks Randy. This helped.
OK - so I'm going to hang fire on this problem right now. As part of
this process I've updated to a 2.6.35-gentoo kernel and I'm not seeing
the problem at all so far. I've booted about 25 times over the last 3
days - warm and cold boots mixed - and so far no failures. While I've
had times in the past where earlier kernels didn't exhibit the problem
for days I don't remember a time where I got this many good boots in a
row.
As my problem didn't seem to be exactly the same as Paul's, and since
Tejun expressed surprise that his fix for Paul's issue didn't fix
mine, maybe my problem is actually something different and (hopefully)
already fixed.
I'll continue to use the machine and watch for any failures. If I get
one I'll reengage the list and go into debug mode.
Cheers,
Mark
^ permalink raw reply [flat|nested] 55+ messages in thread
end of thread, other threads:[~2010-08-04 16:16 UTC | newest]
Thread overview: 55+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-07-02 17:56 Drives missing at boot Mark Knecht
2010-07-03 15:20 ` Mark Knecht
2010-07-03 16:01 ` Tejun Heo
2010-07-03 16:06 ` Mark Knecht
2010-07-03 16:13 ` Tejun Heo
2010-07-03 16:42 ` Mark Knecht
2010-07-05 6:30 ` Tejun Heo
2010-07-05 16:56 ` Mark Knecht
2010-07-06 6:33 ` Tejun Heo
2010-07-06 18:13 ` Mark Knecht
2010-07-07 5:50 ` Tejun Heo
2010-07-07 15:34 ` Mark Knecht
2010-07-07 15:48 ` Tejun Heo
2010-07-07 16:15 ` Mark Knecht
2010-07-07 16:19 ` Tejun Heo
2010-07-07 16:27 ` Mark Knecht
2010-07-07 17:06 ` Mark Knecht
2010-07-07 17:26 ` Tejun Heo
2010-07-07 17:32 ` Mark Knecht
2010-07-19 19:31 ` Mark Knecht
2010-07-19 21:01 ` Tejun Heo
2010-07-20 3:14 ` Paul Check
2010-07-20 14:14 ` Tejun Heo
2010-07-20 14:14 ` Tejun Heo
2010-07-20 14:53 ` Mark Knecht
2010-07-20 16:16 ` Mark Knecht
2010-07-21 20:54 ` Mark Knecht
2010-07-21 21:22 ` Paul Check
2010-07-22 12:39 ` Tejun Heo
2010-07-22 12:39 ` Tejun Heo
2010-08-02 22:07 ` Mark Knecht
2010-08-03 18:41 ` Randy Dunlap
2010-08-03 18:47 ` Mark Knecht
2010-08-03 18:55 ` Randy Dunlap
2010-08-04 16:16 ` Mark Knecht
2010-08-03 18:49 ` Jim Paris
2010-08-03 18:53 ` Mark Knecht
2010-07-20 20:52 ` Mark Knecht
2010-07-20 21:19 ` Paul Check
2010-07-20 21:26 ` Mark Knecht
2010-07-20 23:05 ` Paul Check
2010-07-03 18:56 ` Stan Hoeppner
2010-07-03 19:21 ` Mark Knecht
2010-07-03 19:42 ` Stan Hoeppner
2010-07-03 19:57 ` Mark Knecht
2010-07-03 22:31 ` Mark Knecht
2010-07-04 1:25 ` Thomas Fjellstrom
2010-07-05 6:19 ` Tejun Heo
2010-07-05 16:48 ` Mark Knecht
2010-07-05 23:59 ` Robert Hancock
2010-07-06 4:16 ` Mark Knecht
2010-07-06 6:13 ` Stan Hoeppner
2010-07-06 11:26 ` Sander
2010-07-06 6:32 ` Tejun Heo
2010-07-03 20:15 ` Gene Heskett
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.