* [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code.
@ 2011-02-06 23:04 Lars-Peter Clausen
2011-02-06 23:04 ` Lars-Peter Clausen
` (7 more replies)
0 siblings, 8 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-06 23:04 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, linux-kernel, Lars-Peter Clausen
It has been proven to be inflexible to do scenario management in kernel space.
Since actual neo1973 board support has not been merged in mainline and this
patch has been in the neo1973 tree for some time now it should be safe to remove
this functionality without breaking existing userspace.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/samsung/neo1973_wm8753.c | 142 +----------------------------------
1 files changed, 5 insertions(+), 137 deletions(-)
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index d3cd688..1ea6e61 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -37,17 +37,6 @@
#include "dma.h"
#include "s3c24xx-i2s.h"
-/* define the scenarios */
-#define NEO_AUDIO_OFF 0
-#define NEO_GSM_CALL_AUDIO_HANDSET 1
-#define NEO_GSM_CALL_AUDIO_HEADSET 2
-#define NEO_GSM_CALL_AUDIO_BLUETOOTH 3
-#define NEO_STEREO_TO_SPEAKERS 4
-#define NEO_STEREO_TO_HEADPHONES 5
-#define NEO_CAPTURE_HANDSET 6
-#define NEO_CAPTURE_HEADSET 7
-#define NEO_CAPTURE_BLUETOOTH 8
-
static struct snd_soc_card neo1973;
static struct i2c_client *i2c;
@@ -224,113 +213,6 @@ static struct snd_soc_ops neo1973_voice_ops = {
.hw_free = neo1973_voice_hw_free,
};
-static int neo1973_scenario;
-
-static int neo1973_get_scenario(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = neo1973_scenario;
- return 0;
-}
-
-static int set_scenario_endpoints(struct snd_soc_codec *codec, int scenario)
-{
- struct snd_soc_dapm_context *dapm = &codec->dapm;
-
- pr_debug("Entered %s\n", __func__);
-
- switch (neo1973_scenario) {
- case NEO_AUDIO_OFF:
- snd_soc_dapm_disable_pin(dapm, "Audio Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line In");
- snd_soc_dapm_disable_pin(dapm, "Headset Mic");
- snd_soc_dapm_disable_pin(dapm, "Call Mic");
- break;
- case NEO_GSM_CALL_AUDIO_HANDSET:
- snd_soc_dapm_enable_pin(dapm, "Audio Out");
- snd_soc_dapm_enable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_enable_pin(dapm, "GSM Line In");
- snd_soc_dapm_disable_pin(dapm, "Headset Mic");
- snd_soc_dapm_enable_pin(dapm, "Call Mic");
- break;
- case NEO_GSM_CALL_AUDIO_HEADSET:
- snd_soc_dapm_enable_pin(dapm, "Audio Out");
- snd_soc_dapm_enable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_enable_pin(dapm, "GSM Line In");
- snd_soc_dapm_enable_pin(dapm, "Headset Mic");
- snd_soc_dapm_disable_pin(dapm, "Call Mic");
- break;
- case NEO_GSM_CALL_AUDIO_BLUETOOTH:
- snd_soc_dapm_disable_pin(dapm, "Audio Out");
- snd_soc_dapm_enable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_enable_pin(dapm, "GSM Line In");
- snd_soc_dapm_disable_pin(dapm, "Headset Mic");
- snd_soc_dapm_disable_pin(dapm, "Call Mic");
- break;
- case NEO_STEREO_TO_SPEAKERS:
- snd_soc_dapm_enable_pin(dapm, "Audio Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line In");
- snd_soc_dapm_disable_pin(dapm, "Headset Mic");
- snd_soc_dapm_disable_pin(dapm, "Call Mic");
- break;
- case NEO_STEREO_TO_HEADPHONES:
- snd_soc_dapm_enable_pin(dapm, "Audio Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line In");
- snd_soc_dapm_disable_pin(dapm, "Headset Mic");
- snd_soc_dapm_disable_pin(dapm, "Call Mic");
- break;
- case NEO_CAPTURE_HANDSET:
- snd_soc_dapm_disable_pin(dapm, "Audio Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line In");
- snd_soc_dapm_disable_pin(dapm, "Headset Mic");
- snd_soc_dapm_enable_pin(dapm, "Call Mic");
- break;
- case NEO_CAPTURE_HEADSET:
- snd_soc_dapm_disable_pin(dapm, "Audio Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line In");
- snd_soc_dapm_enable_pin(dapm, "Headset Mic");
- snd_soc_dapm_disable_pin(dapm, "Call Mic");
- break;
- case NEO_CAPTURE_BLUETOOTH:
- snd_soc_dapm_disable_pin(dapm, "Audio Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line In");
- snd_soc_dapm_disable_pin(dapm, "Headset Mic");
- snd_soc_dapm_disable_pin(dapm, "Call Mic");
- break;
- default:
- snd_soc_dapm_disable_pin(dapm, "Audio Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line In");
- snd_soc_dapm_disable_pin(dapm, "Headset Mic");
- snd_soc_dapm_disable_pin(dapm, "Call Mic");
- }
-
- snd_soc_dapm_sync(dapm);
-
- return 0;
-}
-
-static int neo1973_set_scenario(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-
- pr_debug("Entered %s\n", __func__);
-
- if (neo1973_scenario == ucontrol->value.integer.value[0])
- return 0;
-
- neo1973_scenario = ucontrol->value.integer.value[0];
- set_scenario_endpoints(codec, neo1973_scenario);
- return 1;
-}
-
static u8 lm4857_regs[4] = {0x00, 0x40, 0x80, 0xC0};
static void lm4857_write_regs(void)
@@ -454,22 +336,6 @@ static const struct soc_enum lm4857_mode_enum[] = {
SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode),
};
-static const char *neo_scenarios[] = {
- "Off",
- "GSM Handset",
- "GSM Headset",
- "GSM Bluetooth",
- "Speakers",
- "Headphones",
- "Capture Handset",
- "Capture Headset",
- "Capture Bluetooth"
-};
-
-static const struct soc_enum neo_scenario_enum[] = {
- SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(neo_scenarios), neo_scenarios),
-};
-
static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0);
static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0);
@@ -482,8 +348,6 @@ static const struct snd_kcontrol_new wm8753_neo1973_controls[] = {
lm4857_get_reg, lm4857_set_reg, mono_tlv),
SOC_ENUM_EXT("Amp Mode", lm4857_mode_enum[0],
lm4857_get_mode, lm4857_set_mode),
- SOC_ENUM_EXT("Neo Mode", neo_scenario_enum[0],
- neo1973_get_scenario, neo1973_set_scenario),
SOC_SINGLE_EXT("Amp Spk 3D Playback Switch", LM4857_LVOL, 5, 1, 0,
lm4857_get_reg, lm4857_set_reg),
SOC_SINGLE_EXT("Amp HP 3d Playback Switch", LM4857_RVOL, 5, 1, 0,
@@ -520,7 +384,11 @@ static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
ARRAY_SIZE(wm8753_dapm_widgets));
/* set endpoints to default mode */
- set_scenario_endpoints(codec, NEO_AUDIO_OFF);
+ snd_soc_dapm_disable_pin(codec, "Audio Out");
+ snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+ snd_soc_dapm_disable_pin(codec, "GSM Line In");
+ snd_soc_dapm_disable_pin(codec, "Headset Mic");
+ snd_soc_dapm_disable_pin(codec, "Call Mic");
/* add neo1973 specific controls */
err = snd_soc_add_controls(codec, wm8753_neo1973_controls,
--
1.7.2.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 2/7] ASoC: neo1973_wm8753: Move lm4857 specefic code to its own module
2011-02-06 23:04 [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code Lars-Peter Clausen
@ 2011-02-06 23:04 ` Lars-Peter Clausen
2011-02-06 23:04 ` Lars-Peter Clausen
` (6 subsequent siblings)
7 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-06 23:04 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, linux-kernel, Lars-Peter Clausen
This patch moves the code for the lm4857 AMP from the neo1973_wm8753 sound
board driver to its own module.
The lm4857 is a generic AMP IC and not specific to the neo1973.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/codecs/Kconfig | 3 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/lm4857.c | 236 ++++++++++++++++++++++++++++++++++++
sound/soc/codecs/lm4857.h | 23 ++++
sound/soc/samsung/Kconfig | 1 +
sound/soc/samsung/lm4857.h | 32 -----
sound/soc/samsung/neo1973_wm8753.c | 195 +-----------------------------
7 files changed, 267 insertions(+), 225 deletions(-)
create mode 100644 sound/soc/codecs/lm4857.c
create mode 100644 sound/soc/codecs/lm4857.h
delete mode 100644 sound/soc/samsung/lm4857.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index e239345..3e10344 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -338,6 +338,9 @@ config SND_SOC_WM9713
tristate
# Amp
+config SND_SOC_LM4857
+ tristate
+
config SND_SOC_MAX9877
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index ae10507..87ce9bd 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -75,6 +75,7 @@ snd-soc-wm-hubs-objs := wm_hubs.o
snd-soc-jz4740-codec-objs := jz4740.o
# Amp
+snd-soc-lm4857-objs := lm4857.o
snd-soc-max9877-objs := max9877.o
snd-soc-tpa6130a2-objs := tpa6130a2.o
snd-soc-wm2000-objs := wm2000.o
@@ -157,6 +158,7 @@ obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o
# Amp
+obj-$(CONFIG_SND_SOC_LM4857) += snd-soc-lm4857.o
obj-$(CONFIG_SND_SOC_MAX9877) += snd-soc-max9877.o
obj-$(CONFIG_SND_SOC_TPA6130A2) += snd-soc-tpa6130a2.o
obj-$(CONFIG_SND_SOC_WM2000) += snd-soc-wm2000.o
diff --git a/sound/soc/codecs/lm4857.c b/sound/soc/codecs/lm4857.c
new file mode 100644
index 0000000..2d726c0
--- /dev/null
+++ b/sound/soc/codecs/lm4857.c
@@ -0,0 +1,236 @@
+/*
+ * LM4857 AMP driver
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ * graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+
+#include <sound/core.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/tlv.h>
+
+#include "lm4857.h"
+
+static struct {
+ struct i2c_client *i2c;
+ uint8_t regs[4];
+ uint8_t state;
+} lm4857 = {
+ .regs = {0x00, 0x40, 0x80, 0xC0},
+};
+
+/* The register offsets in the cache array */
+#define LM4857_MVOL 0
+#define LM4857_LVOL 1
+#define LM4857_RVOL 2
+#define LM4857_CTRL 3
+
+/* the shifts required to set these bits */
+#define LM4857_3D 5
+#define LM4857_WAKEUP 5
+#define LM4857_EPGAIN 4
+
+static void lm4857_write_regs(void)
+{
+ if (!lm4857.i2c)
+ return;
+
+ if (i2c_master_send(lm4857.i2c, lm4857.regs, 4) != 4)
+ dev_err(&lm4857.i2c->dev, "lm4857: i2c write failed\n");
+}
+
+static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int reg = mc->reg;
+ int shift = mc->shift;
+ int mask = mc->max;
+
+ ucontrol->value.integer.value[0] = (lm4857.regs[reg] >> shift) & mask;
+ return 0;
+}
+
+static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int reg = mc->reg;
+ int shift = mc->shift;
+ int mask = mc->max;
+
+ if (((lm4857.regs[reg] >> shift) & mask) ==
+ ucontrol->value.integer.value[0])
+ return 0;
+
+ lm4857.regs[reg] &= ~(mask << shift);
+ lm4857.regs[reg] |= ucontrol->value.integer.value[0] << shift;
+
+ lm4857_write_regs();
+
+ return 1;
+}
+
+static int lm4857_get_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ uint8_t value = lm4857.regs[LM4857_CTRL] & 0x0F;
+
+ if (value)
+ value -= 5;
+
+ ucontrol->value.integer.value[0] = value;
+
+ return 0;
+}
+
+static int lm4857_set_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ uint8_t value = ucontrol->value.integer.value[0];
+
+ if (value)
+ value += 5;
+
+ if ((lm4857.regs[LM4857_CTRL] & 0x0F) == value)
+ return 0;
+
+ lm4857.regs[LM4857_CTRL] &= 0xF0;
+ lm4857.regs[LM4857_CTRL] |= value;
+ lm4857_write_regs();
+ return 1;
+}
+
+static const char *lm4857_mode[] = {
+ "Off",
+ "Call Speaker",
+ "Stereo Speakers",
+ "Stereo Speakers + Headphones",
+ "Headphones"
+};
+
+static const struct soc_enum lm4857_mode_enum[] = {
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode),
+};
+
+static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0);
+static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0);
+
+static const struct snd_kcontrol_new lm4857_controls[] = {
+ SOC_SINGLE_EXT_TLV("Amp Left Playback Volume", LM4857_LVOL, 0, 31, 0,
+ lm4857_get_reg, lm4857_set_reg, stereo_tlv),
+ SOC_SINGLE_EXT_TLV("Amp Right Playback Volume", LM4857_RVOL, 0, 31, 0,
+ lm4857_get_reg, lm4857_set_reg, stereo_tlv),
+ SOC_SINGLE_EXT_TLV("Amp Mono Playback Volume", LM4857_MVOL, 0, 31, 0,
+ lm4857_get_reg, lm4857_set_reg, mono_tlv),
+ SOC_ENUM_EXT("Amp Mode", lm4857_mode_enum[0],
+ lm4857_get_mode, lm4857_set_mode),
+ SOC_SINGLE_EXT("Amp Spk 3D Playback Switch", LM4857_LVOL, 5, 1, 0,
+ lm4857_get_reg, lm4857_set_reg),
+ SOC_SINGLE_EXT("Amp HP 3d Playback Switch", LM4857_RVOL, 5, 1, 0,
+ lm4857_get_reg, lm4857_set_reg),
+ SOC_SINGLE_EXT("Amp Fast Wakeup Playback Switch", LM4857_CTRL, 5, 1, 0,
+ lm4857_get_reg, lm4857_set_reg),
+ SOC_SINGLE_EXT("Amp Earpiece 6dB Playback Switch", LM4857_CTRL, 4, 1, 0,
+ lm4857_get_reg, lm4857_set_reg),
+};
+
+int lm4857_add_controls(struct snd_soc_codec *codec)
+{
+ return snd_soc_add_controls(codec, lm4857_controls,
+ ARRAY_SIZE(lm4857_controls));
+}
+EXPORT_SYMBOL_GPL(lm4857_add_controls);
+
+static int __devinit lm4857_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ lm4857.i2c = client;
+ lm4857_write_regs();
+ return 0;
+}
+
+static int __devexit lm4857_remove(struct i2c_client *client)
+{
+ lm4857.i2c = NULL;
+ return 0;
+}
+
+static void lm4857_shutdown(struct i2c_client *client)
+{
+ lm4857.regs[LM4857_CTRL] &= 0xF0;
+ lm4857_write_regs();
+}
+
+#ifdef CONFIG_PM
+
+static int lm4857_suspend(struct i2c_client *client, pm_message_t state)
+{
+ lm4857.state = lm4857.regs[LM4857_CTRL] & 0xF;
+
+ if (lm4857.state)
+ lm4857_shutdown(lm4857.i2c);
+
+ return 0;
+}
+
+static int lm4857_resume(struct i2c_client *dev)
+{
+ if (lm4857.state) {
+ lm4857.regs[LM4857_CTRL] |= (lm4857.state & 0x0F);
+ lm4857_write_regs();
+ }
+ return 0;
+}
+
+#else
+#define lm4857_suspend NULL
+#define lm4857_resume NULL
+#endif
+
+static const struct i2c_device_id lm4857_i2c_id[] = {
+ { "lm4857", 0 },
+ { }
+};
+
+static struct i2c_driver lm4857_i2c_driver = {
+ .driver = {
+ .name = "LM4857 I2C Amp",
+ .owner = THIS_MODULE,
+ },
+ .probe = lm4857_probe,
+ .remove = __devexit_p(lm4857_remove),
+ .suspend = lm4857_suspend,
+ .resume = lm4857_resume,
+ .shutdown = lm4857_shutdown,
+ .id_table = lm4857_i2c_id,
+};
+
+static int __init lm4857_init(void)
+{
+ return i2c_add_driver(&lm4857_i2c_driver);
+}
+module_init(lm4857_init);
+
+static void __exit lm4857_exit(void)
+{
+ i2c_del_driver(&lm4857_i2c_driver);
+}
+module_exit(lm4857_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("LM4857 amplifier driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/lm4857.h b/sound/soc/codecs/lm4857.h
new file mode 100644
index 0000000..9b28457
--- /dev/null
+++ b/sound/soc/codecs/lm4857.h
@@ -0,0 +1,23 @@
+/*
+ * lm4857.h -- ALSA Soc Audio Layer
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ * graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Revision history
+ * 18th Jun 2007 Initial version.
+ */
+
+#ifndef LM4857_H_
+#define LM4857_H_
+
+int lm4857_add_controls(struct snd_soc_codec *codec);
+
+#endif /*LM4857_H_*/
+
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index a6a6b5f..ba78e26 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -39,6 +39,7 @@ config SND_SOC_SAMSUNG_NEO1973_WM8753
depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA01
select SND_S3C24XX_I2S
select SND_SOC_WM8753
+ select SND_SOC_LM4857
help
Say Y if you want to add support for SoC audio on smdk2440
with the WM8753.
diff --git a/sound/soc/samsung/lm4857.h b/sound/soc/samsung/lm4857.h
deleted file mode 100644
index 0cf5b70..0000000
--- a/sound/soc/samsung/lm4857.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * lm4857.h -- ALSA Soc Audio Layer
- *
- * Copyright 2007 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory
- * graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Revision history
- * 18th Jun 2007 Initial version.
- */
-
-#ifndef LM4857_H_
-#define LM4857_H_
-
-/* The register offsets in the cache array */
-#define LM4857_MVOL 0
-#define LM4857_LVOL 1
-#define LM4857_RVOL 2
-#define LM4857_CTRL 3
-
-/* the shifts required to set these bits */
-#define LM4857_3D 5
-#define LM4857_WAKEUP 5
-#define LM4857_EPGAIN 4
-
-#endif /*LM4857_H_*/
-
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index 1ea6e61..21e85b0 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -17,11 +17,9 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/i2c.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
-#include <sound/tlv.h>
#include <asm/mach-types.h>
#include <mach/regs-clock.h>
@@ -33,12 +31,11 @@
#include <plat/regs-iis.h>
#include "../codecs/wm8753.h"
-#include "lm4857.h"
+#include "../codecs/lm4857.h"
#include "dma.h"
#include "s3c24xx-i2s.h"
static struct snd_soc_card neo1973;
-static struct i2c_client *i2c;
static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
@@ -213,83 +210,6 @@ static struct snd_soc_ops neo1973_voice_ops = {
.hw_free = neo1973_voice_hw_free,
};
-static u8 lm4857_regs[4] = {0x00, 0x40, 0x80, 0xC0};
-
-static void lm4857_write_regs(void)
-{
- pr_debug("Entered %s\n", __func__);
-
- if (i2c_master_send(i2c, lm4857_regs, 4) != 4)
- printk(KERN_ERR "lm4857: i2c write failed\n");
-}
-
-static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
- int reg = mc->reg;
- int shift = mc->shift;
- int mask = mc->max;
-
- pr_debug("Entered %s\n", __func__);
-
- ucontrol->value.integer.value[0] = (lm4857_regs[reg] >> shift) & mask;
- return 0;
-}
-
-static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
- int reg = mc->reg;
- int shift = mc->shift;
- int mask = mc->max;
-
- if (((lm4857_regs[reg] >> shift) & mask) ==
- ucontrol->value.integer.value[0])
- return 0;
-
- lm4857_regs[reg] &= ~(mask << shift);
- lm4857_regs[reg] |= ucontrol->value.integer.value[0] << shift;
- lm4857_write_regs();
- return 1;
-}
-
-static int lm4857_get_mode(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- u8 value = lm4857_regs[LM4857_CTRL] & 0x0F;
-
- pr_debug("Entered %s\n", __func__);
-
- if (value)
- value -= 5;
-
- ucontrol->value.integer.value[0] = value;
- return 0;
-}
-
-static int lm4857_set_mode(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- u8 value = ucontrol->value.integer.value[0];
-
- pr_debug("Entered %s\n", __func__);
-
- if (value)
- value += 5;
-
- if ((lm4857_regs[LM4857_CTRL] & 0x0F) == value)
- return 0;
-
- lm4857_regs[LM4857_CTRL] &= 0xF0;
- lm4857_regs[LM4857_CTRL] |= value;
- lm4857_write_regs();
- return 1;
-}
-
static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
SND_SOC_DAPM_LINE("Audio Out", NULL),
SND_SOC_DAPM_LINE("GSM Line Out", NULL),
@@ -324,40 +244,6 @@ static const struct snd_soc_dapm_route dapm_routes[] = {
{"ACIN", NULL, "ACOP"},
};
-static const char *lm4857_mode[] = {
- "Off",
- "Call Speaker",
- "Stereo Speakers",
- "Stereo Speakers + Headphones",
- "Headphones"
-};
-
-static const struct soc_enum lm4857_mode_enum[] = {
- SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode),
-};
-
-static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0);
-static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0);
-
-static const struct snd_kcontrol_new wm8753_neo1973_controls[] = {
- SOC_SINGLE_EXT_TLV("Amp Left Playback Volume", LM4857_LVOL, 0, 31, 0,
- lm4857_get_reg, lm4857_set_reg, stereo_tlv),
- SOC_SINGLE_EXT_TLV("Amp Right Playback Volume", LM4857_RVOL, 0, 31, 0,
- lm4857_get_reg, lm4857_set_reg, stereo_tlv),
- SOC_SINGLE_EXT_TLV("Amp Mono Playback Volume", LM4857_MVOL, 0, 31, 0,
- lm4857_get_reg, lm4857_set_reg, mono_tlv),
- SOC_ENUM_EXT("Amp Mode", lm4857_mode_enum[0],
- lm4857_get_mode, lm4857_set_mode),
- SOC_SINGLE_EXT("Amp Spk 3D Playback Switch", LM4857_LVOL, 5, 1, 0,
- lm4857_get_reg, lm4857_set_reg),
- SOC_SINGLE_EXT("Amp HP 3d Playback Switch", LM4857_RVOL, 5, 1, 0,
- lm4857_get_reg, lm4857_set_reg),
- SOC_SINGLE_EXT("Amp Fast Wakeup Playback Switch", LM4857_CTRL, 5, 1, 0,
- lm4857_get_reg, lm4857_set_reg),
- SOC_SINGLE_EXT("Amp Earpiece 6dB Playback Switch", LM4857_CTRL, 4, 1, 0,
- lm4857_get_reg, lm4857_set_reg),
-};
-
/*
* This is an example machine initialisation for a wm8753 connected to a
* neo1973 II. It is missing logic to detect hp/mic insertions and logic
@@ -391,8 +277,7 @@ static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
snd_soc_dapm_disable_pin(codec, "Call Mic");
/* add neo1973 specific controls */
- err = snd_soc_add_controls(codec, wm8753_neo1973_controls,
- ARRAY_SIZE(8753_neo1973_controls));
+ err = lm4857_add_controls(codec);
if (err < 0)
return err;
@@ -449,79 +334,6 @@ static struct snd_soc_card neo1973 = {
.num_links = ARRAY_SIZE(neo1973_dai),
};
-static int lm4857_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- pr_debug("Entered %s\n", __func__);
-
- i2c = client;
-
- lm4857_write_regs();
- return 0;
-}
-
-static int lm4857_i2c_remove(struct i2c_client *client)
-{
- pr_debug("Entered %s\n", __func__);
-
- i2c = NULL;
-
- return 0;
-}
-
-static u8 lm4857_state;
-
-static int lm4857_suspend(struct i2c_client *dev, pm_message_t state)
-{
- pr_debug("Entered %s\n", __func__);
-
- dev_dbg(&dev->dev, "lm4857_suspend\n");
- lm4857_state = lm4857_regs[LM4857_CTRL] & 0xf;
- if (lm4857_state) {
- lm4857_regs[LM4857_CTRL] &= 0xf0;
- lm4857_write_regs();
- }
- return 0;
-}
-
-static int lm4857_resume(struct i2c_client *dev)
-{
- pr_debug("Entered %s\n", __func__);
-
- if (lm4857_state) {
- lm4857_regs[LM4857_CTRL] |= (lm4857_state & 0x0f);
- lm4857_write_regs();
- }
- return 0;
-}
-
-static void lm4857_shutdown(struct i2c_client *dev)
-{
- pr_debug("Entered %s\n", __func__);
-
- dev_dbg(&dev->dev, "lm4857_shutdown\n");
- lm4857_regs[LM4857_CTRL] &= 0xf0;
- lm4857_write_regs();
-}
-
-static const struct i2c_device_id lm4857_i2c_id[] = {
- { "neo1973_lm4857", 0 },
- { }
-};
-
-static struct i2c_driver lm4857_i2c_driver = {
- .driver = {
- .name = "LM4857 I2C Amp",
- .owner = THIS_MODULE,
- },
- .suspend = lm4857_suspend,
- .resume = lm4857_resume,
- .shutdown = lm4857_shutdown,
- .probe = lm4857_i2c_probe,
- .remove = lm4857_i2c_remove,
- .id_table = lm4857_i2c_id,
-};
-
static struct platform_device *neo1973_snd_device;
static int __init neo1973_init(void)
@@ -548,8 +360,6 @@ static int __init neo1973_init(void)
return ret;
}
- ret = i2c_add_driver(&lm4857_i2c_driver);
-
if (ret != 0)
platform_device_unregister(neo1973_snd_device);
@@ -560,7 +370,6 @@ static void __exit neo1973_exit(void)
{
pr_debug("Entered %s\n", __func__);
- i2c_del_driver(&lm4857_i2c_driver);
platform_device_unregister(neo1973_snd_device);
}
--
1.7.2.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 2/7] ASoC: neo1973_wm8753: Move lm4857 specefic code to its own module
@ 2011-02-06 23:04 ` Lars-Peter Clausen
0 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-06 23:04 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, Lars-Peter Clausen, linux-kernel
This patch moves the code for the lm4857 AMP from the neo1973_wm8753 sound
board driver to its own module.
The lm4857 is a generic AMP IC and not specific to the neo1973.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/codecs/Kconfig | 3 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/lm4857.c | 236 ++++++++++++++++++++++++++++++++++++
sound/soc/codecs/lm4857.h | 23 ++++
sound/soc/samsung/Kconfig | 1 +
sound/soc/samsung/lm4857.h | 32 -----
sound/soc/samsung/neo1973_wm8753.c | 195 +-----------------------------
7 files changed, 267 insertions(+), 225 deletions(-)
create mode 100644 sound/soc/codecs/lm4857.c
create mode 100644 sound/soc/codecs/lm4857.h
delete mode 100644 sound/soc/samsung/lm4857.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index e239345..3e10344 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -338,6 +338,9 @@ config SND_SOC_WM9713
tristate
# Amp
+config SND_SOC_LM4857
+ tristate
+
config SND_SOC_MAX9877
tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index ae10507..87ce9bd 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -75,6 +75,7 @@ snd-soc-wm-hubs-objs := wm_hubs.o
snd-soc-jz4740-codec-objs := jz4740.o
# Amp
+snd-soc-lm4857-objs := lm4857.o
snd-soc-max9877-objs := max9877.o
snd-soc-tpa6130a2-objs := tpa6130a2.o
snd-soc-wm2000-objs := wm2000.o
@@ -157,6 +158,7 @@ obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o
# Amp
+obj-$(CONFIG_SND_SOC_LM4857) += snd-soc-lm4857.o
obj-$(CONFIG_SND_SOC_MAX9877) += snd-soc-max9877.o
obj-$(CONFIG_SND_SOC_TPA6130A2) += snd-soc-tpa6130a2.o
obj-$(CONFIG_SND_SOC_WM2000) += snd-soc-wm2000.o
diff --git a/sound/soc/codecs/lm4857.c b/sound/soc/codecs/lm4857.c
new file mode 100644
index 0000000..2d726c0
--- /dev/null
+++ b/sound/soc/codecs/lm4857.c
@@ -0,0 +1,236 @@
+/*
+ * LM4857 AMP driver
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ * graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+
+#include <sound/core.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/tlv.h>
+
+#include "lm4857.h"
+
+static struct {
+ struct i2c_client *i2c;
+ uint8_t regs[4];
+ uint8_t state;
+} lm4857 = {
+ .regs = {0x00, 0x40, 0x80, 0xC0},
+};
+
+/* The register offsets in the cache array */
+#define LM4857_MVOL 0
+#define LM4857_LVOL 1
+#define LM4857_RVOL 2
+#define LM4857_CTRL 3
+
+/* the shifts required to set these bits */
+#define LM4857_3D 5
+#define LM4857_WAKEUP 5
+#define LM4857_EPGAIN 4
+
+static void lm4857_write_regs(void)
+{
+ if (!lm4857.i2c)
+ return;
+
+ if (i2c_master_send(lm4857.i2c, lm4857.regs, 4) != 4)
+ dev_err(&lm4857.i2c->dev, "lm4857: i2c write failed\n");
+}
+
+static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int reg = mc->reg;
+ int shift = mc->shift;
+ int mask = mc->max;
+
+ ucontrol->value.integer.value[0] = (lm4857.regs[reg] >> shift) & mask;
+ return 0;
+}
+
+static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int reg = mc->reg;
+ int shift = mc->shift;
+ int mask = mc->max;
+
+ if (((lm4857.regs[reg] >> shift) & mask) ==
+ ucontrol->value.integer.value[0])
+ return 0;
+
+ lm4857.regs[reg] &= ~(mask << shift);
+ lm4857.regs[reg] |= ucontrol->value.integer.value[0] << shift;
+
+ lm4857_write_regs();
+
+ return 1;
+}
+
+static int lm4857_get_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ uint8_t value = lm4857.regs[LM4857_CTRL] & 0x0F;
+
+ if (value)
+ value -= 5;
+
+ ucontrol->value.integer.value[0] = value;
+
+ return 0;
+}
+
+static int lm4857_set_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ uint8_t value = ucontrol->value.integer.value[0];
+
+ if (value)
+ value += 5;
+
+ if ((lm4857.regs[LM4857_CTRL] & 0x0F) == value)
+ return 0;
+
+ lm4857.regs[LM4857_CTRL] &= 0xF0;
+ lm4857.regs[LM4857_CTRL] |= value;
+ lm4857_write_regs();
+ return 1;
+}
+
+static const char *lm4857_mode[] = {
+ "Off",
+ "Call Speaker",
+ "Stereo Speakers",
+ "Stereo Speakers + Headphones",
+ "Headphones"
+};
+
+static const struct soc_enum lm4857_mode_enum[] = {
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode),
+};
+
+static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0);
+static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0);
+
+static const struct snd_kcontrol_new lm4857_controls[] = {
+ SOC_SINGLE_EXT_TLV("Amp Left Playback Volume", LM4857_LVOL, 0, 31, 0,
+ lm4857_get_reg, lm4857_set_reg, stereo_tlv),
+ SOC_SINGLE_EXT_TLV("Amp Right Playback Volume", LM4857_RVOL, 0, 31, 0,
+ lm4857_get_reg, lm4857_set_reg, stereo_tlv),
+ SOC_SINGLE_EXT_TLV("Amp Mono Playback Volume", LM4857_MVOL, 0, 31, 0,
+ lm4857_get_reg, lm4857_set_reg, mono_tlv),
+ SOC_ENUM_EXT("Amp Mode", lm4857_mode_enum[0],
+ lm4857_get_mode, lm4857_set_mode),
+ SOC_SINGLE_EXT("Amp Spk 3D Playback Switch", LM4857_LVOL, 5, 1, 0,
+ lm4857_get_reg, lm4857_set_reg),
+ SOC_SINGLE_EXT("Amp HP 3d Playback Switch", LM4857_RVOL, 5, 1, 0,
+ lm4857_get_reg, lm4857_set_reg),
+ SOC_SINGLE_EXT("Amp Fast Wakeup Playback Switch", LM4857_CTRL, 5, 1, 0,
+ lm4857_get_reg, lm4857_set_reg),
+ SOC_SINGLE_EXT("Amp Earpiece 6dB Playback Switch", LM4857_CTRL, 4, 1, 0,
+ lm4857_get_reg, lm4857_set_reg),
+};
+
+int lm4857_add_controls(struct snd_soc_codec *codec)
+{
+ return snd_soc_add_controls(codec, lm4857_controls,
+ ARRAY_SIZE(lm4857_controls));
+}
+EXPORT_SYMBOL_GPL(lm4857_add_controls);
+
+static int __devinit lm4857_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ lm4857.i2c = client;
+ lm4857_write_regs();
+ return 0;
+}
+
+static int __devexit lm4857_remove(struct i2c_client *client)
+{
+ lm4857.i2c = NULL;
+ return 0;
+}
+
+static void lm4857_shutdown(struct i2c_client *client)
+{
+ lm4857.regs[LM4857_CTRL] &= 0xF0;
+ lm4857_write_regs();
+}
+
+#ifdef CONFIG_PM
+
+static int lm4857_suspend(struct i2c_client *client, pm_message_t state)
+{
+ lm4857.state = lm4857.regs[LM4857_CTRL] & 0xF;
+
+ if (lm4857.state)
+ lm4857_shutdown(lm4857.i2c);
+
+ return 0;
+}
+
+static int lm4857_resume(struct i2c_client *dev)
+{
+ if (lm4857.state) {
+ lm4857.regs[LM4857_CTRL] |= (lm4857.state & 0x0F);
+ lm4857_write_regs();
+ }
+ return 0;
+}
+
+#else
+#define lm4857_suspend NULL
+#define lm4857_resume NULL
+#endif
+
+static const struct i2c_device_id lm4857_i2c_id[] = {
+ { "lm4857", 0 },
+ { }
+};
+
+static struct i2c_driver lm4857_i2c_driver = {
+ .driver = {
+ .name = "LM4857 I2C Amp",
+ .owner = THIS_MODULE,
+ },
+ .probe = lm4857_probe,
+ .remove = __devexit_p(lm4857_remove),
+ .suspend = lm4857_suspend,
+ .resume = lm4857_resume,
+ .shutdown = lm4857_shutdown,
+ .id_table = lm4857_i2c_id,
+};
+
+static int __init lm4857_init(void)
+{
+ return i2c_add_driver(&lm4857_i2c_driver);
+}
+module_init(lm4857_init);
+
+static void __exit lm4857_exit(void)
+{
+ i2c_del_driver(&lm4857_i2c_driver);
+}
+module_exit(lm4857_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("LM4857 amplifier driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/lm4857.h b/sound/soc/codecs/lm4857.h
new file mode 100644
index 0000000..9b28457
--- /dev/null
+++ b/sound/soc/codecs/lm4857.h
@@ -0,0 +1,23 @@
+/*
+ * lm4857.h -- ALSA Soc Audio Layer
+ *
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory
+ * graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Revision history
+ * 18th Jun 2007 Initial version.
+ */
+
+#ifndef LM4857_H_
+#define LM4857_H_
+
+int lm4857_add_controls(struct snd_soc_codec *codec);
+
+#endif /*LM4857_H_*/
+
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index a6a6b5f..ba78e26 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -39,6 +39,7 @@ config SND_SOC_SAMSUNG_NEO1973_WM8753
depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA01
select SND_S3C24XX_I2S
select SND_SOC_WM8753
+ select SND_SOC_LM4857
help
Say Y if you want to add support for SoC audio on smdk2440
with the WM8753.
diff --git a/sound/soc/samsung/lm4857.h b/sound/soc/samsung/lm4857.h
deleted file mode 100644
index 0cf5b70..0000000
--- a/sound/soc/samsung/lm4857.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * lm4857.h -- ALSA Soc Audio Layer
- *
- * Copyright 2007 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory
- * graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * Revision history
- * 18th Jun 2007 Initial version.
- */
-
-#ifndef LM4857_H_
-#define LM4857_H_
-
-/* The register offsets in the cache array */
-#define LM4857_MVOL 0
-#define LM4857_LVOL 1
-#define LM4857_RVOL 2
-#define LM4857_CTRL 3
-
-/* the shifts required to set these bits */
-#define LM4857_3D 5
-#define LM4857_WAKEUP 5
-#define LM4857_EPGAIN 4
-
-#endif /*LM4857_H_*/
-
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index 1ea6e61..21e85b0 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -17,11 +17,9 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/i2c.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
-#include <sound/tlv.h>
#include <asm/mach-types.h>
#include <mach/regs-clock.h>
@@ -33,12 +31,11 @@
#include <plat/regs-iis.h>
#include "../codecs/wm8753.h"
-#include "lm4857.h"
+#include "../codecs/lm4857.h"
#include "dma.h"
#include "s3c24xx-i2s.h"
static struct snd_soc_card neo1973;
-static struct i2c_client *i2c;
static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
@@ -213,83 +210,6 @@ static struct snd_soc_ops neo1973_voice_ops = {
.hw_free = neo1973_voice_hw_free,
};
-static u8 lm4857_regs[4] = {0x00, 0x40, 0x80, 0xC0};
-
-static void lm4857_write_regs(void)
-{
- pr_debug("Entered %s\n", __func__);
-
- if (i2c_master_send(i2c, lm4857_regs, 4) != 4)
- printk(KERN_ERR "lm4857: i2c write failed\n");
-}
-
-static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
- int reg = mc->reg;
- int shift = mc->shift;
- int mask = mc->max;
-
- pr_debug("Entered %s\n", __func__);
-
- ucontrol->value.integer.value[0] = (lm4857_regs[reg] >> shift) & mask;
- return 0;
-}
-
-static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
- int reg = mc->reg;
- int shift = mc->shift;
- int mask = mc->max;
-
- if (((lm4857_regs[reg] >> shift) & mask) ==
- ucontrol->value.integer.value[0])
- return 0;
-
- lm4857_regs[reg] &= ~(mask << shift);
- lm4857_regs[reg] |= ucontrol->value.integer.value[0] << shift;
- lm4857_write_regs();
- return 1;
-}
-
-static int lm4857_get_mode(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- u8 value = lm4857_regs[LM4857_CTRL] & 0x0F;
-
- pr_debug("Entered %s\n", __func__);
-
- if (value)
- value -= 5;
-
- ucontrol->value.integer.value[0] = value;
- return 0;
-}
-
-static int lm4857_set_mode(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- u8 value = ucontrol->value.integer.value[0];
-
- pr_debug("Entered %s\n", __func__);
-
- if (value)
- value += 5;
-
- if ((lm4857_regs[LM4857_CTRL] & 0x0F) == value)
- return 0;
-
- lm4857_regs[LM4857_CTRL] &= 0xF0;
- lm4857_regs[LM4857_CTRL] |= value;
- lm4857_write_regs();
- return 1;
-}
-
static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
SND_SOC_DAPM_LINE("Audio Out", NULL),
SND_SOC_DAPM_LINE("GSM Line Out", NULL),
@@ -324,40 +244,6 @@ static const struct snd_soc_dapm_route dapm_routes[] = {
{"ACIN", NULL, "ACOP"},
};
-static const char *lm4857_mode[] = {
- "Off",
- "Call Speaker",
- "Stereo Speakers",
- "Stereo Speakers + Headphones",
- "Headphones"
-};
-
-static const struct soc_enum lm4857_mode_enum[] = {
- SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode),
-};
-
-static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0);
-static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0);
-
-static const struct snd_kcontrol_new wm8753_neo1973_controls[] = {
- SOC_SINGLE_EXT_TLV("Amp Left Playback Volume", LM4857_LVOL, 0, 31, 0,
- lm4857_get_reg, lm4857_set_reg, stereo_tlv),
- SOC_SINGLE_EXT_TLV("Amp Right Playback Volume", LM4857_RVOL, 0, 31, 0,
- lm4857_get_reg, lm4857_set_reg, stereo_tlv),
- SOC_SINGLE_EXT_TLV("Amp Mono Playback Volume", LM4857_MVOL, 0, 31, 0,
- lm4857_get_reg, lm4857_set_reg, mono_tlv),
- SOC_ENUM_EXT("Amp Mode", lm4857_mode_enum[0],
- lm4857_get_mode, lm4857_set_mode),
- SOC_SINGLE_EXT("Amp Spk 3D Playback Switch", LM4857_LVOL, 5, 1, 0,
- lm4857_get_reg, lm4857_set_reg),
- SOC_SINGLE_EXT("Amp HP 3d Playback Switch", LM4857_RVOL, 5, 1, 0,
- lm4857_get_reg, lm4857_set_reg),
- SOC_SINGLE_EXT("Amp Fast Wakeup Playback Switch", LM4857_CTRL, 5, 1, 0,
- lm4857_get_reg, lm4857_set_reg),
- SOC_SINGLE_EXT("Amp Earpiece 6dB Playback Switch", LM4857_CTRL, 4, 1, 0,
- lm4857_get_reg, lm4857_set_reg),
-};
-
/*
* This is an example machine initialisation for a wm8753 connected to a
* neo1973 II. It is missing logic to detect hp/mic insertions and logic
@@ -391,8 +277,7 @@ static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
snd_soc_dapm_disable_pin(codec, "Call Mic");
/* add neo1973 specific controls */
- err = snd_soc_add_controls(codec, wm8753_neo1973_controls,
- ARRAY_SIZE(8753_neo1973_controls));
+ err = lm4857_add_controls(codec);
if (err < 0)
return err;
@@ -449,79 +334,6 @@ static struct snd_soc_card neo1973 = {
.num_links = ARRAY_SIZE(neo1973_dai),
};
-static int lm4857_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- pr_debug("Entered %s\n", __func__);
-
- i2c = client;
-
- lm4857_write_regs();
- return 0;
-}
-
-static int lm4857_i2c_remove(struct i2c_client *client)
-{
- pr_debug("Entered %s\n", __func__);
-
- i2c = NULL;
-
- return 0;
-}
-
-static u8 lm4857_state;
-
-static int lm4857_suspend(struct i2c_client *dev, pm_message_t state)
-{
- pr_debug("Entered %s\n", __func__);
-
- dev_dbg(&dev->dev, "lm4857_suspend\n");
- lm4857_state = lm4857_regs[LM4857_CTRL] & 0xf;
- if (lm4857_state) {
- lm4857_regs[LM4857_CTRL] &= 0xf0;
- lm4857_write_regs();
- }
- return 0;
-}
-
-static int lm4857_resume(struct i2c_client *dev)
-{
- pr_debug("Entered %s\n", __func__);
-
- if (lm4857_state) {
- lm4857_regs[LM4857_CTRL] |= (lm4857_state & 0x0f);
- lm4857_write_regs();
- }
- return 0;
-}
-
-static void lm4857_shutdown(struct i2c_client *dev)
-{
- pr_debug("Entered %s\n", __func__);
-
- dev_dbg(&dev->dev, "lm4857_shutdown\n");
- lm4857_regs[LM4857_CTRL] &= 0xf0;
- lm4857_write_regs();
-}
-
-static const struct i2c_device_id lm4857_i2c_id[] = {
- { "neo1973_lm4857", 0 },
- { }
-};
-
-static struct i2c_driver lm4857_i2c_driver = {
- .driver = {
- .name = "LM4857 I2C Amp",
- .owner = THIS_MODULE,
- },
- .suspend = lm4857_suspend,
- .resume = lm4857_resume,
- .shutdown = lm4857_shutdown,
- .probe = lm4857_i2c_probe,
- .remove = lm4857_i2c_remove,
- .id_table = lm4857_i2c_id,
-};
-
static struct platform_device *neo1973_snd_device;
static int __init neo1973_init(void)
@@ -548,8 +360,6 @@ static int __init neo1973_init(void)
return ret;
}
- ret = i2c_add_driver(&lm4857_i2c_driver);
-
if (ret != 0)
platform_device_unregister(neo1973_snd_device);
@@ -560,7 +370,6 @@ static void __exit neo1973_exit(void)
{
pr_debug("Entered %s\n", __func__);
- i2c_del_driver(&lm4857_i2c_driver);
platform_device_unregister(neo1973_snd_device);
}
--
1.7.2.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 3/7] ASoC: codecs: lm4857: Use dev_pm_ops
2011-02-06 23:04 [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code Lars-Peter Clausen
@ 2011-02-06 23:04 ` Lars-Peter Clausen
2011-02-06 23:04 ` Lars-Peter Clausen
` (6 subsequent siblings)
7 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-06 23:04 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, linux-kernel, Lars-Peter Clausen
Use dev_pm_ops instead of legacy I2C power management hooks.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/codecs/lm4857.c | 15 ++++++++-------
1 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/lm4857.c b/sound/soc/codecs/lm4857.c
index 2d726c0..76cdb3f 100644
--- a/sound/soc/codecs/lm4857.c
+++ b/sound/soc/codecs/lm4857.c
@@ -175,9 +175,9 @@ static void lm4857_shutdown(struct i2c_client *client)
lm4857_write_regs();
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
-static int lm4857_suspend(struct i2c_client *client, pm_message_t state)
+static int lm4857_suspend(struct device *dev)
{
lm4857.state = lm4857.regs[LM4857_CTRL] & 0xF;
@@ -187,7 +187,7 @@ static int lm4857_suspend(struct i2c_client *client, pm_message_t state)
return 0;
}
-static int lm4857_resume(struct i2c_client *dev)
+static int lm4857_resume(struct device *dev)
{
if (lm4857.state) {
lm4857.regs[LM4857_CTRL] |= (lm4857.state & 0x0F);
@@ -196,9 +196,11 @@ static int lm4857_resume(struct i2c_client *dev)
return 0;
}
+static SIMPLE_DEV_PM_OPS(lm4857_pm_ops, lm4857_suspend, lm4857_resume);
+#define LM4857_PM_OPS (&lm4857_pm_ops)
+
#else
-#define lm4857_suspend NULL
-#define lm4857_resume NULL
+#define LM4857_PM_OPS NULL
#endif
static const struct i2c_device_id lm4857_i2c_id[] = {
@@ -210,11 +212,10 @@ static struct i2c_driver lm4857_i2c_driver = {
.driver = {
.name = "LM4857 I2C Amp",
.owner = THIS_MODULE,
+ .pm = LM4857_PM_OPS,
},
.probe = lm4857_probe,
.remove = __devexit_p(lm4857_remove),
- .suspend = lm4857_suspend,
- .resume = lm4857_resume,
.shutdown = lm4857_shutdown,
.id_table = lm4857_i2c_id,
};
--
1.7.2.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 3/7] ASoC: codecs: lm4857: Use dev_pm_ops
@ 2011-02-06 23:04 ` Lars-Peter Clausen
0 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-06 23:04 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, Lars-Peter Clausen, linux-kernel
Use dev_pm_ops instead of legacy I2C power management hooks.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/codecs/lm4857.c | 15 ++++++++-------
1 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/lm4857.c b/sound/soc/codecs/lm4857.c
index 2d726c0..76cdb3f 100644
--- a/sound/soc/codecs/lm4857.c
+++ b/sound/soc/codecs/lm4857.c
@@ -175,9 +175,9 @@ static void lm4857_shutdown(struct i2c_client *client)
lm4857_write_regs();
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
-static int lm4857_suspend(struct i2c_client *client, pm_message_t state)
+static int lm4857_suspend(struct device *dev)
{
lm4857.state = lm4857.regs[LM4857_CTRL] & 0xF;
@@ -187,7 +187,7 @@ static int lm4857_suspend(struct i2c_client *client, pm_message_t state)
return 0;
}
-static int lm4857_resume(struct i2c_client *dev)
+static int lm4857_resume(struct device *dev)
{
if (lm4857.state) {
lm4857.regs[LM4857_CTRL] |= (lm4857.state & 0x0F);
@@ -196,9 +196,11 @@ static int lm4857_resume(struct i2c_client *dev)
return 0;
}
+static SIMPLE_DEV_PM_OPS(lm4857_pm_ops, lm4857_suspend, lm4857_resume);
+#define LM4857_PM_OPS (&lm4857_pm_ops)
+
#else
-#define lm4857_suspend NULL
-#define lm4857_resume NULL
+#define LM4857_PM_OPS NULL
#endif
static const struct i2c_device_id lm4857_i2c_id[] = {
@@ -210,11 +212,10 @@ static struct i2c_driver lm4857_i2c_driver = {
.driver = {
.name = "LM4857 I2C Amp",
.owner = THIS_MODULE,
+ .pm = LM4857_PM_OPS,
},
.probe = lm4857_probe,
.remove = __devexit_p(lm4857_remove),
- .suspend = lm4857_suspend,
- .resume = lm4857_resume,
.shutdown = lm4857_shutdown,
.id_table = lm4857_i2c_id,
};
--
1.7.2.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 4/7] ASoC: neo1973_gta02_wm8753: Remove lm4853_{set,get}_state
2011-02-06 23:04 [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code Lars-Peter Clausen
2011-02-06 23:04 ` Lars-Peter Clausen
2011-02-06 23:04 ` Lars-Peter Clausen
@ 2011-02-06 23:04 ` Lars-Peter Clausen
2011-02-06 23:04 ` Lars-Peter Clausen
` (4 subsequent siblings)
7 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-06 23:04 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, linux-kernel, Lars-Peter Clausen
This patch drops the lm4853_{set,get}_state functions and the "Amp State Switch"
control.
Those were noops which existed to maintain alsa state file compatibility. Since
the control names have changed due to internal changes in the ASoC core and
state file compatibility was broken anyway it makes sense to drop them.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/samsung/neo1973_gta02_wm8753.c | 55 ++++--------------------------
1 files changed, 7 insertions(+), 48 deletions(-)
diff --git a/sound/soc/samsung/neo1973_gta02_wm8753.c b/sound/soc/samsung/neo1973_gta02_wm8753.c
index 95ebf81..b007dd79 100644
--- a/sound/soc/samsung/neo1973_gta02_wm8753.c
+++ b/sound/soc/samsung/neo1973_gta02_wm8753.c
@@ -194,47 +194,14 @@ static struct snd_soc_ops neo1973_gta02_voice_ops = {
.hw_free = neo1973_gta02_voice_hw_free,
};
-#define LM4853_AMP 1
-#define LM4853_SPK 2
-
-static u8 lm4853_state;
-
-/* This has no effect, it exists only to maintain compatibility with
- * existing ALSA state files.
- */
-static int lm4853_set_state(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- int val = ucontrol->value.integer.value[0];
-
- if (val)
- lm4853_state |= LM4853_AMP;
- else
- lm4853_state &= ~LM4853_AMP;
-
- return 0;
-}
-
-static int lm4853_get_state(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP;
-
- return 0;
-}
+static int gta02_speaker_enabled;
static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- int val = ucontrol->value.integer.value[0];
-
- if (val) {
- lm4853_state |= LM4853_SPK;
- gpio_set_value(GTA02_GPIO_HP_IN, 0);
- } else {
- lm4853_state &= ~LM4853_SPK;
- gpio_set_value(GTA02_GPIO_HP_IN, 1);
- }
+ gta02_speaker_enabled = ucontrol->value.integer.value[0];
+
+ gpio_set_value(GTA02_GPIO_HP_IN, !gta02_speaker_enabled);
return 0;
}
@@ -242,14 +209,12 @@ static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
- ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1;
-
+ ucontrol->value.integer.value[0] = gta02_speaker_enabled;
return 0;
}
static int lm4853_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *k,
- int event)
+ struct snd_kcontrol *k, int event)
{
gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event));
@@ -304,13 +269,7 @@ static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
SOC_DAPM_PIN_SWITCH("Handset Mic"),
SOC_DAPM_PIN_SWITCH("Handset Spk"),
- /* This has no effect, it exists only to maintain compatibility with
- * existing ALSA state files.
- */
- SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0,
- lm4853_get_state,
- lm4853_set_state),
- SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0,
+ SOC_SINGLE_BOOL_EXT("Amp Spk Switch", 0,
lm4853_get_spk,
lm4853_set_spk),
};
--
1.7.2.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 5/7] ASoC: Samsung: neo1973: Use gpio_request_array to request gpios
2011-02-06 23:04 [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code Lars-Peter Clausen
@ 2011-02-06 23:04 ` Lars-Peter Clausen
2011-02-06 23:04 ` Lars-Peter Clausen
` (6 subsequent siblings)
7 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-06 23:04 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, linux-kernel, Lars-Peter Clausen
Using gpio_request_array instead of requesting and setting up each gpio by hand
makes the code more readable and more compact.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/samsung/neo1973_gta02_wm8753.c | 36 +++++++----------------------
1 files changed, 9 insertions(+), 27 deletions(-)
diff --git a/sound/soc/samsung/neo1973_gta02_wm8753.c b/sound/soc/samsung/neo1973_gta02_wm8753.c
index b007dd79..62d2f39 100644
--- a/sound/soc/samsung/neo1973_gta02_wm8753.c
+++ b/sound/soc/samsung/neo1973_gta02_wm8753.c
@@ -370,6 +370,11 @@ static struct snd_soc_card neo1973_gta02 = {
.num_links = ARRAY_SIZE(neo1973_gta02_dai),
};
+static const struct gpio neo1973_gta02_gpios[] = {
+ { GTA02_GPIO_HP_IN, GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
+ { GTA02_GPIO_AMP_SHUT, GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
+};
+
static struct platform_device *neo1973_gta02_snd_device;
static int __init neo1973_gta02_init(void)
@@ -397,37 +402,15 @@ static int __init neo1973_gta02_init(void)
if (ret)
goto err_unregister_dai;
- /* Initialise GPIOs used by amp */
- ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN");
+ ret = gpio_request_array(neo1973_gta02_gpios,
+ ARRAY_SIZE(neo1973_gta02_gpios));
if (ret) {
- pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN);
+ pr_err("gta02_wm8753: Failed to request gpio\n");
goto err_del_device;
}
- ret = gpio_direction_output(GTA02_GPIO_HP_IN, 1);
- if (ret) {
- pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN);
- goto err_free_gpio_hp_in;
- }
-
- ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT");
- if (ret) {
- pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT);
- goto err_free_gpio_hp_in;
- }
-
- ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1);
- if (ret) {
- pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT);
- goto err_free_gpio_amp_shut;
- }
-
return 0;
-err_free_gpio_amp_shut:
- gpio_free(GTA02_GPIO_AMP_SHUT);
-err_free_gpio_hp_in:
- gpio_free(GTA02_GPIO_HP_IN);
err_del_device:
platform_device_del(neo1973_gta02_snd_device);
err_unregister_dai:
@@ -440,10 +423,9 @@ module_init(neo1973_gta02_init);
static void __exit neo1973_gta02_exit(void)
{
+ gpio_free_array(neo1973_gta02_gpios, ARRAY_SIZE(neo1973_gta02_gpios));
snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev);
platform_device_unregister(neo1973_gta02_snd_device);
- gpio_free(GTA02_GPIO_HP_IN);
- gpio_free(GTA02_GPIO_AMP_SHUT);
}
module_exit(neo1973_gta02_exit);
--
1.7.2.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 5/7] ASoC: Samsung: neo1973: Use gpio_request_array to request gpios
@ 2011-02-06 23:04 ` Lars-Peter Clausen
0 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-06 23:04 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, Lars-Peter Clausen, linux-kernel
Using gpio_request_array instead of requesting and setting up each gpio by hand
makes the code more readable and more compact.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/samsung/neo1973_gta02_wm8753.c | 36 +++++++----------------------
1 files changed, 9 insertions(+), 27 deletions(-)
diff --git a/sound/soc/samsung/neo1973_gta02_wm8753.c b/sound/soc/samsung/neo1973_gta02_wm8753.c
index b007dd79..62d2f39 100644
--- a/sound/soc/samsung/neo1973_gta02_wm8753.c
+++ b/sound/soc/samsung/neo1973_gta02_wm8753.c
@@ -370,6 +370,11 @@ static struct snd_soc_card neo1973_gta02 = {
.num_links = ARRAY_SIZE(neo1973_gta02_dai),
};
+static const struct gpio neo1973_gta02_gpios[] = {
+ { GTA02_GPIO_HP_IN, GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
+ { GTA02_GPIO_AMP_SHUT, GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
+};
+
static struct platform_device *neo1973_gta02_snd_device;
static int __init neo1973_gta02_init(void)
@@ -397,37 +402,15 @@ static int __init neo1973_gta02_init(void)
if (ret)
goto err_unregister_dai;
- /* Initialise GPIOs used by amp */
- ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN");
+ ret = gpio_request_array(neo1973_gta02_gpios,
+ ARRAY_SIZE(neo1973_gta02_gpios));
if (ret) {
- pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN);
+ pr_err("gta02_wm8753: Failed to request gpio\n");
goto err_del_device;
}
- ret = gpio_direction_output(GTA02_GPIO_HP_IN, 1);
- if (ret) {
- pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN);
- goto err_free_gpio_hp_in;
- }
-
- ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT");
- if (ret) {
- pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT);
- goto err_free_gpio_hp_in;
- }
-
- ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1);
- if (ret) {
- pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT);
- goto err_free_gpio_amp_shut;
- }
-
return 0;
-err_free_gpio_amp_shut:
- gpio_free(GTA02_GPIO_AMP_SHUT);
-err_free_gpio_hp_in:
- gpio_free(GTA02_GPIO_HP_IN);
err_del_device:
platform_device_del(neo1973_gta02_snd_device);
err_unregister_dai:
@@ -440,10 +423,9 @@ module_init(neo1973_gta02_init);
static void __exit neo1973_gta02_exit(void)
{
+ gpio_free_array(neo1973_gta02_gpios, ARRAY_SIZE(neo1973_gta02_gpios));
snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev);
platform_device_unregister(neo1973_gta02_snd_device);
- gpio_free(GTA02_GPIO_HP_IN);
- gpio_free(GTA02_GPIO_AMP_SHUT);
}
module_exit(neo1973_gta02_exit);
--
1.7.2.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
2011-02-06 23:04 [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code Lars-Peter Clausen
` (3 preceding siblings ...)
2011-02-06 23:04 ` Lars-Peter Clausen
@ 2011-02-06 23:04 ` Lars-Peter Clausen
2011-02-07 11:59 ` Mark Brown
2011-02-06 23:04 ` [PATCH 7/7] ASoC: Samsung: Merge neo1937 and neo1973_gta02 sound board driver Lars-Peter Clausen
` (2 subsequent siblings)
7 siblings, 1 reply; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-06 23:04 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, linux-kernel, Lars-Peter Clausen
This patch fixes two issues with the bluethooth DAI registration:
* The DAI has to be registered only after the sound device has been added.
* Currently the DAI is registered with snd_soc_register_dai which causes it to
be named after the device it was registered for. Which is in this case the
"soc-audio" device. (Ab)use snd_soc_register_dais which causes the DAI to be
named after the DAI driver, which is what we want in this case.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/samsung/neo1973_gta02_wm8753.c | 23 +++++++++++------------
1 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/sound/soc/samsung/neo1973_gta02_wm8753.c b/sound/soc/samsung/neo1973_gta02_wm8753.c
index 62d2f39..a82779b 100644
--- a/sound/soc/samsung/neo1973_gta02_wm8753.c
+++ b/sound/soc/samsung/neo1973_gta02_wm8753.c
@@ -391,32 +391,31 @@ static int __init neo1973_gta02_init(void)
if (!neo1973_gta02_snd_device)
return -ENOMEM;
- /* register bluetooth DAI here */
- ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, &bt_dai);
- if (ret)
- goto err_put_device;
-
platform_set_drvdata(neo1973_gta02_snd_device, &neo1973_gta02);
ret = platform_device_add(neo1973_gta02_snd_device);
+ if (ret) {
+ platform_device_del(neo1973_gta02_snd_device);
+ return ret;
+ }
+ /* register bluetooth DAI here */
+ ret = snd_soc_register_dais(&neo1973_gta02_snd_device->dev, &bt_dai, 1);
if (ret)
- goto err_unregister_dai;
+ goto err_unregister_device;
ret = gpio_request_array(neo1973_gta02_gpios,
ARRAY_SIZE(neo1973_gta02_gpios));
if (ret) {
pr_err("gta02_wm8753: Failed to request gpio\n");
- goto err_del_device;
+ goto err_unregister_dai;
}
return 0;
-err_del_device:
- platform_device_del(neo1973_gta02_snd_device);
err_unregister_dai:
snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev);
-err_put_device:
- platform_device_put(neo1973_gta02_snd_device);
+err_unregister_device:
+ platform_device_unregister(neo1973_gta02_snd_device);
return ret;
}
module_init(neo1973_gta02_init);
@@ -424,7 +423,7 @@ module_init(neo1973_gta02_init);
static void __exit neo1973_gta02_exit(void)
{
gpio_free_array(neo1973_gta02_gpios, ARRAY_SIZE(neo1973_gta02_gpios));
- snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev);
+ snd_soc_unregister_dais(&neo1973_gta02_snd_device->dev);
platform_device_unregister(neo1973_gta02_snd_device);
}
module_exit(neo1973_gta02_exit);
--
1.7.2.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH 7/7] ASoC: Samsung: Merge neo1937 and neo1973_gta02 sound board driver
2011-02-06 23:04 [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code Lars-Peter Clausen
` (4 preceding siblings ...)
2011-02-06 23:04 ` [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration Lars-Peter Clausen
@ 2011-02-06 23:04 ` Lars-Peter Clausen
2011-02-07 2:25 ` [alsa-devel] [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code Jassi Brar
2011-02-07 11:42 ` Mark Brown
7 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-06 23:04 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel, linux-kernel, Lars-Peter Clausen
The neo1973(GTA01) and neo1973_gta2(GTA02) have a very similar audio hardware
setup. They both use the same codec with the same routing to the gsm modem and
bluetooth chip. But they do use different AMPs though and there are some minor
differences in the speaker setup.
As a result most of the code of those two drivers is identical.
So from a maintenance point of view it makes sense to merge them into a single
driver. It also reduces the size of kernel images supporting both the GTA01 and
GTA02.
As a side-effect of this merge the GTA01 for example gains support for routing
audio to and from the bluetooth DAI.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
sound/soc/samsung/Kconfig | 17 +-
sound/soc/samsung/Makefile | 2 -
sound/soc/samsung/neo1973_gta02_wm8753.c | 434 ------------------------------
sound/soc/samsung/neo1973_wm8753.c | 253 +++++++++++++-----
4 files changed, 192 insertions(+), 514 deletions(-)
delete mode 100644 sound/soc/samsung/neo1973_gta02_wm8753.c
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index ba78e26..6deccbd 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -35,23 +35,14 @@ config SND_SAMSUNG_I2S
tristate
config SND_SOC_SAMSUNG_NEO1973_WM8753
- tristate "SoC I2S Audio support for NEO1973 - WM8753"
- depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA01
+ tristate "Audio support for Openmoko Neo1973 Smartphones (GTA01/GTA02)"
+ depends on SND_SOC_SAMSUNG && (MACH_NEO1973_GTA01 || MACH_NEO1973_GTA02)
select SND_S3C24XX_I2S
select SND_SOC_WM8753
select SND_SOC_LM4857
help
- Say Y if you want to add support for SoC audio on smdk2440
- with the WM8753.
-
-config SND_SOC_SAMSUNG_NEO1973_GTA02_WM8753
- tristate "Audio support for the Openmoko Neo FreeRunner (GTA02)"
- depends on SND_SOC_SAMSUNG && MACH_NEO1973_GTA02
- select SND_S3C24XX_I2S
- select SND_SOC_WM8753
- help
- This driver provides audio support for the Openmoko Neo FreeRunner
- smartphone.
+ Say Y here to enable audio support for the Openmoko Neo1973
+ Smartphones.
config SND_SOC_SAMSUNG_JIVE_WM8750
tristate "SoC I2S Audio support for Jive"
diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
index 705d4e8..294dec0 100644
--- a/sound/soc/samsung/Makefile
+++ b/sound/soc/samsung/Makefile
@@ -20,7 +20,6 @@ obj-$(CONFIG_SND_SAMSUNG_I2S) += snd-soc-i2s.o
# S3C24XX Machine Support
snd-soc-jive-wm8750-objs := jive_wm8750.o
snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
-snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o
snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
@@ -38,7 +37,6 @@ snd-soc-smdk-spdif-objs := smdk_spdif.o
obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
-obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
obj-$(CONFIG_SND_SOC_SAMSUNG_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
obj-$(CONFIG_SND_SOC_SAMSUNG_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
diff --git a/sound/soc/samsung/neo1973_gta02_wm8753.c b/sound/soc/samsung/neo1973_gta02_wm8753.c
deleted file mode 100644
index a82779b..0000000
--- a/sound/soc/samsung/neo1973_gta02_wm8753.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * neo1973_gta02_wm8753.c -- SoC audio for Openmoko Freerunner(GTA02)
- *
- * Copyright 2007 Openmoko Inc
- * Author: Graeme Gregory <graeme@openmoko.org>
- * Copyright 2007 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory <linux@wolfsonmicro.com>
- * Copyright 2009 Wolfson Microelectronics
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/gpio.h>
-
-#include <sound/soc.h>
-
-#include <asm/mach-types.h>
-#include <plat/regs-iis.h>
-#include <mach/gta02.h>
-
-#include "../codecs/wm8753.h"
-#include "s3c24xx-i2s.h"
-
-static struct snd_soc_card neo1973_gta02;
-
-static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- unsigned int pll_out = 0, bclk = 0;
- int ret = 0;
- unsigned long iis_clkrate;
-
- iis_clkrate = s3c24xx_i2s_get_clockrate();
-
- switch (params_rate(params)) {
- case 8000:
- case 16000:
- pll_out = 12288000;
- break;
- case 48000:
- bclk = WM8753_BCLK_DIV_4;
- pll_out = 12288000;
- break;
- case 96000:
- bclk = WM8753_BCLK_DIV_2;
- pll_out = 12288000;
- break;
- case 11025:
- bclk = WM8753_BCLK_DIV_16;
- pll_out = 11289600;
- break;
- case 22050:
- bclk = WM8753_BCLK_DIV_8;
- pll_out = 11289600;
- break;
- case 44100:
- bclk = WM8753_BCLK_DIV_4;
- pll_out = 11289600;
- break;
- case 88200:
- bclk = WM8753_BCLK_DIV_2;
- pll_out = 11289600;
- break;
- }
-
- /* set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0)
- return ret;
-
- /* set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0)
- return ret;
-
- /* set the codec system clock for DAC and ADC */
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
- SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- /* set MCLK division for sample rate */
- ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
- S3C2410_IISMOD_32FS);
- if (ret < 0)
- return ret;
-
- /* set codec BCLK division for sample rate */
- ret = snd_soc_dai_set_clkdiv(codec_dai,
- WM8753_BCLKDIV, bclk);
- if (ret < 0)
- return ret;
-
- /* set prescaler division for sample rate */
- ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
- S3C24XX_PRESCALE(4, 4));
- if (ret < 0)
- return ret;
-
- /* codec PLL input is PCLK/4 */
- ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0,
- iis_clkrate / 4, pll_out);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
-
- /* disable the PLL */
- return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0);
-}
-
-/*
- * Neo1973 WM8753 HiFi DAI opserations.
- */
-static struct snd_soc_ops neo1973_gta02_hifi_ops = {
- .hw_params = neo1973_gta02_hifi_hw_params,
- .hw_free = neo1973_gta02_hifi_hw_free,
-};
-
-static int neo1973_gta02_voice_hw_params(
- struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- unsigned int pcmdiv = 0;
- int ret = 0;
- unsigned long iis_clkrate;
-
- iis_clkrate = s3c24xx_i2s_get_clockrate();
-
- if (params_rate(params) != 8000)
- return -EINVAL;
- if (params_channels(params) != 1)
- return -EINVAL;
-
- pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
-
- /* todo: gg check mode (DSP_B) against CSR datasheet */
- /* set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
- if (ret < 0)
- return ret;
-
- /* set the codec system clock for DAC and ADC */
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK,
- 12288000, SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- /* set codec PCM division for sample rate */
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV,
- pcmdiv);
- if (ret < 0)
- return ret;
-
- /* configure and enable PLL for 12.288MHz output */
- ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
- iis_clkrate / 4, 12288000);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
-
- /* disable the PLL */
- return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0);
-}
-
-static struct snd_soc_ops neo1973_gta02_voice_ops = {
- .hw_params = neo1973_gta02_voice_hw_params,
- .hw_free = neo1973_gta02_voice_hw_free,
-};
-
-static int gta02_speaker_enabled;
-
-static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- gta02_speaker_enabled = ucontrol->value.integer.value[0];
-
- gpio_set_value(GTA02_GPIO_HP_IN, !gta02_speaker_enabled);
-
- return 0;
-}
-
-static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = gta02_speaker_enabled;
- return 0;
-}
-
-static int lm4853_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *k, int event)
-{
- gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event));
-
- return 0;
-}
-
-static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
- SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
- SND_SOC_DAPM_LINE("GSM Line Out", NULL),
- SND_SOC_DAPM_LINE("GSM Line In", NULL),
- SND_SOC_DAPM_MIC("Headset Mic", NULL),
- SND_SOC_DAPM_MIC("Handset Mic", NULL),
- SND_SOC_DAPM_SPK("Handset Spk", NULL),
-};
-
-
-/* example machine audio_mapnections */
-static const struct snd_soc_dapm_route audio_map[] = {
-
- /* Connections to the lm4853 amp */
- {"Stereo Out", NULL, "LOUT1"},
- {"Stereo Out", NULL, "ROUT1"},
-
- /* Connections to the GSM Module */
- {"GSM Line Out", NULL, "MONO1"},
- {"GSM Line Out", NULL, "MONO2"},
- {"RXP", NULL, "GSM Line In"},
- {"RXN", NULL, "GSM Line In"},
-
- /* Connections to Headset */
- {"MIC1", NULL, "Mic Bias"},
- {"Mic Bias", NULL, "Headset Mic"},
-
- /* Call Mic */
- {"MIC2", NULL, "Mic Bias"},
- {"MIC2N", NULL, "Mic Bias"},
- {"Mic Bias", NULL, "Handset Mic"},
-
- /* Call Speaker */
- {"Handset Spk", NULL, "LOUT2"},
- {"Handset Spk", NULL, "ROUT2"},
-
- /* Connect the ALC pins */
- {"ACIN", NULL, "ACOP"},
-};
-
-static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
- SOC_DAPM_PIN_SWITCH("Stereo Out"),
- SOC_DAPM_PIN_SWITCH("GSM Line Out"),
- SOC_DAPM_PIN_SWITCH("GSM Line In"),
- SOC_DAPM_PIN_SWITCH("Headset Mic"),
- SOC_DAPM_PIN_SWITCH("Handset Mic"),
- SOC_DAPM_PIN_SWITCH("Handset Spk"),
-
- SOC_SINGLE_BOOL_EXT("Amp Spk Switch", 0,
- lm4853_get_spk,
- lm4853_set_spk),
-};
-
-/*
- * This is an example machine initialisation for a wm8753 connected to a
- * neo1973 GTA02.
- */
-static int neo1973_gta02_wm8753_init(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
- int err;
-
- /* set up NC codec pins */
- snd_soc_dapm_nc_pin(dapm, "OUT3");
- snd_soc_dapm_nc_pin(dapm, "OUT4");
- snd_soc_dapm_nc_pin(dapm, "LINE1");
- snd_soc_dapm_nc_pin(dapm, "LINE2");
-
- /* Add neo1973 gta02 specific widgets */
- snd_soc_dapm_new_controls(dapm, wm8753_dapm_widgets,
- ARRAY_SIZE(wm8753_dapm_widgets));
-
- /* add neo1973 gta02 specific controls */
- err = snd_soc_add_controls(codec, wm8753_neo1973_gta02_controls,
- ARRAY_SIZE(wm8753_neo1973_gta02_controls));
-
- if (err < 0)
- return err;
-
- /* set up neo1973 gta02 specific audio path audio_map */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-
- /* set endpoints to default off mode */
- snd_soc_dapm_disable_pin(dapm, "Stereo Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
- snd_soc_dapm_disable_pin(dapm, "GSM Line In");
- snd_soc_dapm_disable_pin(dapm, "Headset Mic");
- snd_soc_dapm_disable_pin(dapm, "Handset Mic");
- snd_soc_dapm_disable_pin(dapm, "Handset Spk");
-
- /* allow audio paths from the GSM modem to run during suspend */
- snd_soc_dapm_ignore_suspend(dapm, "Stereo Out");
- snd_soc_dapm_ignore_suspend(dapm, "GSM Line Out");
- snd_soc_dapm_ignore_suspend(dapm, "GSM Line In");
- snd_soc_dapm_ignore_suspend(dapm, "Headset Mic");
- snd_soc_dapm_ignore_suspend(dapm, "Handset Mic");
- snd_soc_dapm_ignore_suspend(dapm, "Handset Spk");
-
- snd_soc_dapm_sync(dapm);
-
- return 0;
-}
-
-/*
- * BT Codec DAI
- */
-static struct snd_soc_dai_driver bt_dai = {
- .name = "bluetooth-dai",
- .playback = {
- .channels_min = 1,
- .channels_max = 1,
- .rates = SNDRV_PCM_RATE_8000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
- .capture = {
- .channels_min = 1,
- .channels_max = 1,
- .rates = SNDRV_PCM_RATE_8000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
-};
-
-static struct snd_soc_dai_link neo1973_gta02_dai[] = {
-{ /* Hifi Playback - for similatious use with voice below */
- .name = "WM8753",
- .stream_name = "WM8753 HiFi",
- .cpu_dai_name = "s3c24xx-iis",
- .codec_dai_name = "wm8753-hifi",
- .init = neo1973_gta02_wm8753_init,
- .platform_name = "samsung-audio",
- .codec_name = "wm8753-codec.0-001a",
- .ops = &neo1973_gta02_hifi_ops,
-},
-{ /* Voice via BT */
- .name = "Bluetooth",
- .stream_name = "Voice",
- .cpu_dai_name = "bluetooth-dai",
- .codec_dai_name = "wm8753-voice",
- .ops = &neo1973_gta02_voice_ops,
- .codec_name = "wm8753-codec.0-001a",
- .platform_name = "samsung-audio",
-},
-};
-
-static struct snd_soc_card neo1973_gta02 = {
- .name = "neo1973-gta02",
- .dai_link = neo1973_gta02_dai,
- .num_links = ARRAY_SIZE(neo1973_gta02_dai),
-};
-
-static const struct gpio neo1973_gta02_gpios[] = {
- { GTA02_GPIO_HP_IN, GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
- { GTA02_GPIO_AMP_SHUT, GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
-};
-
-static struct platform_device *neo1973_gta02_snd_device;
-
-static int __init neo1973_gta02_init(void)
-{
- int ret;
-
- if (!machine_is_neo1973_gta02()) {
- printk(KERN_INFO
- "Only GTA02 is supported by this ASoC driver\n");
- return -ENODEV;
- }
-
- neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1);
- if (!neo1973_gta02_snd_device)
- return -ENOMEM;
-
- platform_set_drvdata(neo1973_gta02_snd_device, &neo1973_gta02);
- ret = platform_device_add(neo1973_gta02_snd_device);
- if (ret) {
- platform_device_del(neo1973_gta02_snd_device);
- return ret;
- }
-
- /* register bluetooth DAI here */
- ret = snd_soc_register_dais(&neo1973_gta02_snd_device->dev, &bt_dai, 1);
- if (ret)
- goto err_unregister_device;
-
- ret = gpio_request_array(neo1973_gta02_gpios,
- ARRAY_SIZE(neo1973_gta02_gpios));
- if (ret) {
- pr_err("gta02_wm8753: Failed to request gpio\n");
- goto err_unregister_dai;
- }
-
- return 0;
-
-err_unregister_dai:
- snd_soc_unregister_dai(&neo1973_gta02_snd_device->dev);
-err_unregister_device:
- platform_device_unregister(neo1973_gta02_snd_device);
- return ret;
-}
-module_init(neo1973_gta02_init);
-
-static void __exit neo1973_gta02_exit(void)
-{
- gpio_free_array(neo1973_gta02_gpios, ARRAY_SIZE(neo1973_gta02_gpios));
- snd_soc_unregister_dais(&neo1973_gta02_snd_device->dev);
- platform_device_unregister(neo1973_gta02_snd_device);
-}
-module_exit(neo1973_gta02_exit);
-
-/* Module information */
-MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org");
-MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index 21e85b0..fa20ee6 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -1,42 +1,33 @@
/*
- * neo1973_wm8753.c -- SoC audio for Neo1973
+ * neo1973_wm8753.c -- SoC audio for Openmoko Neo1973 and Freerunner devices
*
+ * Copyright 2007 Openmoko Inc
+ * Author: Graeme Gregory <graeme@openmoko.org>
* Copyright 2007 Wolfson Microelectronics PLC.
* Author: Graeme Gregory
* graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Copyright 2009 Wolfson Microelectronics
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
- *
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
+#include <linux/gpio.h>
+
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-#include <linux/io.h>
-#include <mach/spi-gpio.h>
-
#include <plat/regs-iis.h>
+#include <mach/gta02.h>
#include "../codecs/wm8753.h"
#include "../codecs/lm4857.h"
-#include "dma.h"
#include "s3c24xx-i2s.h"
-static struct snd_soc_card neo1973;
-
static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -47,8 +38,6 @@ static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
int ret = 0;
unsigned long iis_clkrate;
- pr_debug("Entered %s\n", __func__);
-
iis_clkrate = s3c24xx_i2s_get_clockrate();
switch (params_rate(params)) {
@@ -133,8 +122,6 @@ static int neo1973_hifi_hw_free(struct snd_pcm_substream *substream)
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- pr_debug("Entered %s\n", __func__);
-
/* disable the PLL */
return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0);
}
@@ -156,8 +143,6 @@ static int neo1973_voice_hw_params(struct snd_pcm_substream *substream,
int ret = 0;
unsigned long iis_clkrate;
- pr_debug("Entered %s\n", __func__);
-
iis_clkrate = s3c24xx_i2s_get_clockrate();
if (params_rate(params) != 8000)
@@ -199,8 +184,6 @@ static int neo1973_voice_hw_free(struct snd_pcm_substream *substream)
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- pr_debug("Entered %s\n", __func__);
-
/* disable the PLL */
return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0);
}
@@ -210,20 +193,21 @@ static struct snd_soc_ops neo1973_voice_ops = {
.hw_free = neo1973_voice_hw_free,
};
+/* Shared routes and controls */
+
static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
- SND_SOC_DAPM_LINE("Audio Out", NULL),
SND_SOC_DAPM_LINE("GSM Line Out", NULL),
SND_SOC_DAPM_LINE("GSM Line In", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
- SND_SOC_DAPM_MIC("Call Mic", NULL),
+ SND_SOC_DAPM_MIC("Handset Mic", NULL),
};
-static const struct snd_soc_dapm_route dapm_routes[] = {
+static const struct snd_soc_dapm_route audio_map[] = {
- /* Connections to the lm4857 amp */
- {"Audio Out", NULL, "LOUT1"},
- {"Audio Out", NULL, "ROUT1"},
+ /* Connections to the amp */
+ {"Stereo Out", NULL, "LOUT1"},
+ {"Stereo Out", NULL, "ROUT1"},
/* Connections to the GSM Module */
{"GSM Line Out", NULL, "MONO1"},
@@ -238,28 +222,109 @@ static const struct snd_soc_dapm_route dapm_routes[] = {
/* Call Mic */
{"MIC2", NULL, "Mic Bias"},
{"MIC2N", NULL, "Mic Bias"},
- {"Mic Bias", NULL, "Call Mic"},
+ {"Mic Bias", NULL, "Handset Mic"},
/* Connect the ALC pins */
{"ACIN", NULL, "ACOP"},
};
-/*
- * This is an example machine initialisation for a wm8753 connected to a
- * neo1973 II. It is missing logic to detect hp/mic insertions and logic
- * to re-route the audio in such an event.
- */
+static const struct snd_kcontrol_new wm8753_neo1973_controls[] = {
+ SOC_DAPM_PIN_SWITCH("Stereo Out"),
+ SOC_DAPM_PIN_SWITCH("GSM Line Out"),
+ SOC_DAPM_PIN_SWITCH("GSM Line In"),
+ SOC_DAPM_PIN_SWITCH("Headset Mic"),
+ SOC_DAPM_PIN_SWITCH("Handset Mic"),
+};
+
+/* GTA01 specific controlls */
+
+#ifdef CONFIG_MACH_NEO1973_GTA01
+
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets_gta01[] = {
+ SND_SOC_DAPM_SPK("Stereo Out", NULL),
+};
+
+#else
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets_gta01[] = {};
+#endif
+
+/* GTA02 specific routes and controlls */
+
+#ifdef CONFIG_MACH_NEO1973_GTA02
+
+static int gta02_speaker_enabled;
+
+static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ gta02_speaker_enabled = ucontrol->value.integer.value[0];
+
+ gpio_set_value(GTA02_GPIO_HP_IN, !gta02_speaker_enabled);
+
+ return 0;
+}
+
+static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = gta02_speaker_enabled;
+ return 0;
+}
+
+static int lm4853_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
+{
+ gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event));
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_route audio_map_gta02[] = {
+ /* Call Speaker */
+ {"Handset Spk", NULL, "LOUT2"},
+ {"Handset Spk", NULL, "ROUT2"},
+};
+
+static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
+ SOC_DAPM_PIN_SWITCH("Handset Spk"),
+
+ SOC_SINGLE_BOOL_EXT("Amp Spk Switch", 0,
+ lm4853_get_spk,
+ lm4853_set_spk),
+};
+
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets_gta02[] = {
+ SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
+ SND_SOC_DAPM_SPK("Handset Spk", NULL),
+};
+
+#else
+static const struct snd_soc_dapm_route audio_map_gta02[] = {};
+static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {};
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets_gta02[] = {};
+#endif
+
static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
int err;
-
- pr_debug("Entered %s\n", __func__);
+ const struct snd_soc_dapm_widget *machine_widgets;
+ size_t num_machine_widgets;
+
+ if (machine_is_neo1973_gta01()) {
+ machine_widgets = wm8753_dapm_widgets_gta01;
+ num_machine_widgets = ARRAY_SIZE(wm8753_dapm_widgets_gta01);
+ } else {
+ machine_widgets = wm8753_dapm_widgets_gta02;
+ num_machine_widgets = ARRAY_SIZE(wm8753_dapm_widgets_gta02);
+ }
/* set up NC codec pins */
- snd_soc_dapm_nc_pin(dapm, "LOUT2");
- snd_soc_dapm_nc_pin(dapm, "ROUT2");
+ if (machine_is_neo1973_gta01()) {
+ snd_soc_dapm_nc_pin(dapm, "LOUT2");
+ snd_soc_dapm_nc_pin(dapm, "ROUT2");
+ }
snd_soc_dapm_nc_pin(dapm, "OUT3");
snd_soc_dapm_nc_pin(dapm, "OUT4");
snd_soc_dapm_nc_pin(dapm, "LINE1");
@@ -269,21 +334,52 @@ static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
snd_soc_dapm_new_controls(dapm, wm8753_dapm_widgets,
ARRAY_SIZE(wm8753_dapm_widgets));
- /* set endpoints to default mode */
- snd_soc_dapm_disable_pin(codec, "Audio Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line In");
- snd_soc_dapm_disable_pin(codec, "Headset Mic");
- snd_soc_dapm_disable_pin(codec, "Call Mic");
+ snd_soc_dapm_new_controls(dapm, machine_widgets, num_machine_widgets);
+
/* add neo1973 specific controls */
- err = lm4857_add_controls(codec);
+ err = snd_soc_add_controls(codec, wm8753_neo1973_controls,
+ ARRAY_SIZE(wm8753_neo1973_controls));
+
+ if (err < 0)
+ return err;
+
+ if (machine_is_neo1973_gta01()) {
+ err = lm4857_add_controls(codec);
+ } else {
+ err = snd_soc_add_controls(codec, wm8753_neo1973_gta02_controls,
+ ARRAY_SIZE(wm8753_neo1973_gta02_controls));
+ }
+
if (err < 0)
return err;
- /* set up neo1973 specific audio routes */
- err = snd_soc_dapm_add_routes(dapm, dapm_routes,
- ARRAY_SIZE(dapm_routes));
+ /* set up neo1973 gta02 specific audio path audio_map */
+ snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
+
+ if (machine_is_neo1973_gta02()) {
+ snd_soc_dapm_add_routes(dapm, audio_map_gta02,
+ ARRAY_SIZE(audio_map_gta02));
+ }
+
+ /* set endpoints to default off mode */
+ snd_soc_dapm_disable_pin(dapm, "Stereo Out");
+ snd_soc_dapm_disable_pin(dapm, "GSM Line Out");
+ snd_soc_dapm_disable_pin(dapm, "GSM Line In");
+ snd_soc_dapm_disable_pin(dapm, "Headset Mic");
+ snd_soc_dapm_disable_pin(dapm, "Handset Mic");
+
+ /* allow audio paths from the GSM modem to run during suspend */
+ snd_soc_dapm_ignore_suspend(dapm, "Stereo Out");
+ snd_soc_dapm_ignore_suspend(dapm, "GSM Line Out");
+ snd_soc_dapm_ignore_suspend(dapm, "GSM Line In");
+ snd_soc_dapm_ignore_suspend(dapm, "Headset Mic");
+ snd_soc_dapm_ignore_suspend(dapm, "Handset Mic");
+
+ if (machine_is_neo1973_gta02()) {
+ snd_soc_dapm_disable_pin(dapm, "Handset Spk");
+ snd_soc_dapm_ignore_suspend(dapm, "Handset Spk");
+ }
snd_soc_dapm_sync(dapm);
return 0;
@@ -292,18 +388,20 @@ static int neo1973_wm8753_init(struct snd_soc_pcm_runtime *rtd)
/*
* BT Codec DAI
*/
-static struct snd_soc_dai bt_dai = {
+static struct snd_soc_dai_driver bt_dai = {
.name = "bluetooth-dai",
.playback = {
.channels_min = 1,
.channels_max = 1,
.rates = SNDRV_PCM_RATE_8000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
.capture = {
.channels_min = 1,
.channels_max = 1,
.rates = SNDRV_PCM_RATE_8000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
};
static struct snd_soc_dai_link neo1973_dai[] = {
@@ -336,17 +434,24 @@ static struct snd_soc_card neo1973 = {
static struct platform_device *neo1973_snd_device;
+#ifdef CONFIG_MACH_NEO1973_GTA02
+static const struct gpio neo1973_gta02_gpios[] = {
+ { GTA02_GPIO_HP_IN, GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
+ { GTA02_GPIO_AMP_SHUT, GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
+};
+#else
+static const struct gpio neo1973_gta02_gpios[] = {};
+#endif
+
static int __init neo1973_init(void)
{
int ret;
- pr_debug("Entered %s\n", __func__);
-
- if (!machine_is_neo1973_gta01()) {
- printk(KERN_INFO
- "Only GTA01 hardware supported by ASoC driver\n");
+ if (!machine_is_neo1973_gta01() && !machine_is_neo1973_gta02())
return -ENODEV;
- }
+
+ if (machine_is_neo1973_gta02())
+ neo1973.name = "neo1973gta02";
neo1973_snd_device = platform_device_alloc("soc-audio", -1);
if (!neo1973_snd_device)
@@ -360,23 +465,41 @@ static int __init neo1973_init(void)
return ret;
}
- if (ret != 0)
- platform_device_unregister(neo1973_snd_device);
+ /* register bluetooth DAI here */
+ ret = snd_soc_register_dais(&neo1973_snd_device->dev, &bt_dai, 1);
+ if (ret)
+ goto err_unregister_device;
+ if (machine_is_neo1973_gta02()) {
+ ret = gpio_request_array(neo1973_gta02_gpios,
+ ARRAY_SIZE(neo1973_gta02_gpios));
+ if (ret)
+ goto err_unregister_dais;
+ }
+
+ return 0;
+
+err_unregister_dais:
+ snd_soc_unregister_dais(&neo1973_snd_device->dev, 1);
+err_unregister_device:
+ platform_device_unregister(neo1973_snd_device);
return ret;
}
+module_init(neo1973_init);
static void __exit neo1973_exit(void)
{
- pr_debug("Entered %s\n", __func__);
+ if (machine_is_neo1973_gta02()) {
+ gpio_free_array(neo1973_gta02_gpios,
+ ARRAY_SIZE(neo1973_gta02_gpios));
+ }
+ snd_soc_unregister_dais(&neo1973_snd_device->dev, 1);
platform_device_unregister(neo1973_snd_device);
}
-
-module_init(neo1973_init);
module_exit(neo1973_exit);
/* Module information */
MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org, www.openmoko.org");
-MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973");
+MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 and Frerunner");
MODULE_LICENSE("GPL");
--
1.7.2.3
^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [alsa-devel] [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code.
2011-02-06 23:04 [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code Lars-Peter Clausen
` (5 preceding siblings ...)
2011-02-06 23:04 ` [PATCH 7/7] ASoC: Samsung: Merge neo1937 and neo1973_gta02 sound board driver Lars-Peter Clausen
@ 2011-02-07 2:25 ` Jassi Brar
2011-02-07 11:42 ` Mark Brown
7 siblings, 0 replies; 36+ messages in thread
From: Jassi Brar @ 2011-02-07 2:25 UTC (permalink / raw)
To: Lars-Peter Clausen
Cc: Mark Brown, Liam Girdwood, alsa-devel, linux-kernel, Linux Samsung SoC
On Mon, Feb 7, 2011 at 8:04 AM, Lars-Peter Clausen <lars@metafoo.de> wrote:
> It has been proven to be inflexible to do scenario management in kernel space.
>
> Since actual neo1973 board support has not been merged in mainline and this
> patch has been in the neo1973 tree for some time now it should be safe to remove
> this functionality without breaking existing userspace.
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
All
Acked-by: Jassi Brar <jassi.brar@samsung.com>
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code.
2011-02-06 23:04 [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code Lars-Peter Clausen
@ 2011-02-07 11:42 ` Mark Brown
2011-02-06 23:04 ` Lars-Peter Clausen
` (6 subsequent siblings)
7 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-07 11:42 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: Liam Girdwood, alsa-devel, linux-kernel
On Mon, Feb 07, 2011 at 12:04:17AM +0100, Lars-Peter Clausen wrote:
> + snd_soc_dapm_disable_pin(codec, "Audio Out");
> + snd_soc_dapm_disable_pin(codec, "GSM Line Out");
> + snd_soc_dapm_disable_pin(codec, "GSM Line In");
> + snd_soc_dapm_disable_pin(codec, "Headset Mic");
> + snd_soc_dapm_disable_pin(codec, "Call Mic");
This will mean that it's impossible to enable most (if not all) of the
audio paths in the system which probably isn't what you want.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code.
@ 2011-02-07 11:42 ` Mark Brown
0 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-07 11:42 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: alsa-devel, linux-kernel, Liam Girdwood
On Mon, Feb 07, 2011 at 12:04:17AM +0100, Lars-Peter Clausen wrote:
> + snd_soc_dapm_disable_pin(codec, "Audio Out");
> + snd_soc_dapm_disable_pin(codec, "GSM Line Out");
> + snd_soc_dapm_disable_pin(codec, "GSM Line In");
> + snd_soc_dapm_disable_pin(codec, "Headset Mic");
> + snd_soc_dapm_disable_pin(codec, "Call Mic");
This will mean that it's impossible to enable most (if not all) of the
audio paths in the system which probably isn't what you want.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 2/7] ASoC: neo1973_wm8753: Move lm4857 specefic code to its own module
2011-02-06 23:04 ` Lars-Peter Clausen
@ 2011-02-07 11:50 ` Mark Brown
-1 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-07 11:50 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: Liam Girdwood, alsa-devel, linux-kernel
On Mon, Feb 07, 2011 at 12:04:18AM +0100, Lars-Peter Clausen wrote:
> +int lm4857_add_controls(struct snd_soc_codec *codec)
> +{
> + return snd_soc_add_controls(codec, lm4857_controls,
> + ARRAY_SIZE(lm4857_controls));
> +}
> +EXPORT_SYMBOL_GPL(lm4857_add_controls);
If you're moving this into a standalone driver it should be updated to
register as a CODEC.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 2/7] ASoC: neo1973_wm8753: Move lm4857 specefic code to its own module
@ 2011-02-07 11:50 ` Mark Brown
0 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-07 11:50 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: alsa-devel, linux-kernel, Liam Girdwood
On Mon, Feb 07, 2011 at 12:04:18AM +0100, Lars-Peter Clausen wrote:
> +int lm4857_add_controls(struct snd_soc_codec *codec)
> +{
> + return snd_soc_add_controls(codec, lm4857_controls,
> + ARRAY_SIZE(lm4857_controls));
> +}
> +EXPORT_SYMBOL_GPL(lm4857_add_controls);
If you're moving this into a standalone driver it should be updated to
register as a CODEC.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
2011-02-06 23:04 ` [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration Lars-Peter Clausen
@ 2011-02-07 11:59 ` Mark Brown
0 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-07 11:59 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: Liam Girdwood, alsa-devel, linux-kernel
On Mon, Feb 07, 2011 at 12:04:22AM +0100, Lars-Peter Clausen wrote:
> This patch fixes two issues with the bluethooth DAI registration:
> * The DAI has to be registered only after the sound device has been added.
This isn't a problem, components in the system can be registered in any
order.
> * Currently the DAI is registered with snd_soc_register_dai which causes it to
> be named after the device it was registered for. Which is in this case the
> "soc-audio" device. (Ab)use snd_soc_register_dais which causes the DAI to be
> named after the DAI driver, which is what we want in this case.
This doesn't tie up with your change which...
> - /* register bluetooth DAI here */
> - ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, &bt_dai);
> - if (ret)
> - goto err_put_device;
> + /* register bluetooth DAI here */
> + ret = snd_soc_register_dais(&neo1973_gta02_snd_device->dev, &bt_dai, 1);
> if (ret)
> - goto err_unregister_dai;
> + goto err_unregister_device;
...uses the same device in both cases and looking briefly at the code
both register functions just use the dev that was passed in. In any
case, we clearly shouldn't be applying patches which bodge around the
core.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
@ 2011-02-07 11:59 ` Mark Brown
0 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-07 11:59 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: alsa-devel, linux-kernel, Liam Girdwood
On Mon, Feb 07, 2011 at 12:04:22AM +0100, Lars-Peter Clausen wrote:
> This patch fixes two issues with the bluethooth DAI registration:
> * The DAI has to be registered only after the sound device has been added.
This isn't a problem, components in the system can be registered in any
order.
> * Currently the DAI is registered with snd_soc_register_dai which causes it to
> be named after the device it was registered for. Which is in this case the
> "soc-audio" device. (Ab)use snd_soc_register_dais which causes the DAI to be
> named after the DAI driver, which is what we want in this case.
This doesn't tie up with your change which...
> - /* register bluetooth DAI here */
> - ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, &bt_dai);
> - if (ret)
> - goto err_put_device;
> + /* register bluetooth DAI here */
> + ret = snd_soc_register_dais(&neo1973_gta02_snd_device->dev, &bt_dai, 1);
> if (ret)
> - goto err_unregister_dai;
> + goto err_unregister_device;
...uses the same device in both cases and looking briefly at the code
both register functions just use the dev that was passed in. In any
case, we clearly shouldn't be applying patches which bodge around the
core.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
2011-02-07 11:59 ` Mark Brown
(?)
@ 2011-02-07 16:53 ` Lars-Peter Clausen
2011-02-07 17:02 ` Mark Brown
-1 siblings, 1 reply; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-07 16:53 UTC (permalink / raw)
To: Mark Brown; +Cc: Liam Girdwood, alsa-devel, linux-kernel
On 02/07/2011 12:59 PM, Mark Brown wrote:
> On Mon, Feb 07, 2011 at 12:04:22AM +0100, Lars-Peter Clausen wrote:
>> This patch fixes two issues with the bluethooth DAI registration:
>> * The DAI has to be registered only after the sound device has been added.
>
> This isn't a problem, components in the system can be registered in any
> order.
By device I mean the soc-core platform device, which has to exist before a dai can be
registered with that device.
>
>> * Currently the DAI is registered with snd_soc_register_dai which causes it to
>> be named after the device it was registered for. Which is in this case the
>> "soc-audio" device. (Ab)use snd_soc_register_dais which causes the DAI to be
>> named after the DAI driver, which is what we want in this case.
>
> This doesn't tie up with your change which...
>
>> - /* register bluetooth DAI here */
>> - ret = snd_soc_register_dai(&neo1973_gta02_snd_device->dev, &bt_dai);
>> - if (ret)
>> - goto err_put_device;
>
>> + /* register bluetooth DAI here */
>> + ret = snd_soc_register_dais(&neo1973_gta02_snd_device->dev, &bt_dai, 1);
>> if (ret)
>> - goto err_unregister_dai;
>> + goto err_unregister_device;
>
> ...uses the same device in both cases and looking briefly at the code
> both register functions just use the dev that was passed in.
The difference between the two is that snd_soc_register_dais calls fmt_multiple_name,
but snd_soc_register_dai uses fmt_single_name. The later uses the name of device for
which the dai is registered to generate the dai_device name, while the former uses
the name of the dai_driver.
So by calling snd_soc_register_dai the bluetooth dai_device will be name "soc-core"
instead of "bluetooth-dai". So currently there is no match between the dai_link and
the dai_device, as a result the sound card is not instantiated.
> In any
> case, we clearly shouldn't be applying patches which bodge around the
> core.
Well the alternative would be a patch looking like this:
- .cpu_dai_name = "bluetooth-dai",
+ .cpu_dai_name = "soc-core",
Which isn't really nice either.
- Lars
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code.
2011-02-07 11:42 ` Mark Brown
@ 2011-02-07 17:01 ` Lars-Peter Clausen
-1 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-07 17:01 UTC (permalink / raw)
To: Mark Brown; +Cc: Liam Girdwood, alsa-devel, linux-kernel
On 02/07/2011 12:42 PM, Mark Brown wrote:
> On Mon, Feb 07, 2011 at 12:04:17AM +0100, Lars-Peter Clausen wrote:
>
>> + snd_soc_dapm_disable_pin(codec, "Audio Out");
>> + snd_soc_dapm_disable_pin(codec, "GSM Line Out");
>> + snd_soc_dapm_disable_pin(codec, "GSM Line In");
>> + snd_soc_dapm_disable_pin(codec, "Headset Mic");
>> + snd_soc_dapm_disable_pin(codec, "Call Mic");
>
> This will mean that it's impossible to enable most (if not all) of the
> audio paths in the system which probably isn't what you want.
I've seem to have overlooked to add DAPM_SWITCH_PIN controls for these pins, since it
has been done implicitly in the patch merging the gta01 and gta02 driver.
I'll resend a updated version.
- Lars
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code.
@ 2011-02-07 17:01 ` Lars-Peter Clausen
0 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-07 17:01 UTC (permalink / raw)
To: Mark Brown; +Cc: alsa-devel, linux-kernel, Liam Girdwood
On 02/07/2011 12:42 PM, Mark Brown wrote:
> On Mon, Feb 07, 2011 at 12:04:17AM +0100, Lars-Peter Clausen wrote:
>
>> + snd_soc_dapm_disable_pin(codec, "Audio Out");
>> + snd_soc_dapm_disable_pin(codec, "GSM Line Out");
>> + snd_soc_dapm_disable_pin(codec, "GSM Line In");
>> + snd_soc_dapm_disable_pin(codec, "Headset Mic");
>> + snd_soc_dapm_disable_pin(codec, "Call Mic");
>
> This will mean that it's impossible to enable most (if not all) of the
> audio paths in the system which probably isn't what you want.
I've seem to have overlooked to add DAPM_SWITCH_PIN controls for these pins, since it
has been done implicitly in the patch merging the gta01 and gta02 driver.
I'll resend a updated version.
- Lars
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
2011-02-07 16:53 ` Lars-Peter Clausen
@ 2011-02-07 17:02 ` Mark Brown
2011-02-07 17:37 ` Lars-Peter Clausen
0 siblings, 1 reply; 36+ messages in thread
From: Mark Brown @ 2011-02-07 17:02 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: Liam Girdwood, alsa-devel, linux-kernel
Please fix your MUA to word wrap at less than 80 columns, I've reflowed
your text so it's legible.
On Mon, Feb 07, 2011 at 05:53:56PM +0100, Lars-Peter Clausen wrote:
> > In any
> > case, we clearly shouldn't be applying patches which bodge around the
> > core.
> Well the alternative would be a patch looking like this:
> - .cpu_dai_name = "bluetooth-dai",
> + .cpu_dai_name = "soc-core",
> Which isn't really nice either.
If you think the core isn't behaving helpfully the core should be
changed. This is part of how APIs evolve to be maximally useful.
To be honest it's not massively obvious that we shouldn't just be taking
the name of the device here, either using a device to represent the
modem or registering the card using snd_soc_register_machine() and using
a more meaningful name for the card seems like a sensible approach here.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
2011-02-07 17:02 ` Mark Brown
@ 2011-02-07 17:37 ` Lars-Peter Clausen
0 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-07 17:37 UTC (permalink / raw)
To: Mark Brown; +Cc: Liam Girdwood, alsa-devel, linux-kernel
On 02/07/2011 06:02 PM, Mark Brown wrote:
> Please fix your MUA to word wrap at less than 80 columns, I've reflowed
> your text so it's legible.
>
> On Mon, Feb 07, 2011 at 05:53:56PM +0100, Lars-Peter Clausen wrote:
>
>>> In any
>>> case, we clearly shouldn't be applying patches which bodge around the
>>> core.
>
>> Well the alternative would be a patch looking like this:
>
>> - .cpu_dai_name = "bluetooth-dai",
>> + .cpu_dai_name = "soc-core",
>
>> Which isn't really nice either.
>
> If you think the core isn't behaving helpfully the core should be
> changed. This is part of how APIs evolve to be maximally useful.
>
As I see it the problem is that we have a deviceless dai and there is not really a
way to register a dai without a device. But I have no idea right now how to change
the core to make it "behave helpfully".
And in a sense snd_soc_register_dais seems to be the right thing to use for now,
because the sound card as a whole has multiple dais they just not all registered at
the same time.
> To be honest it's not massively obvious that we shouldn't just be taking
> the name of the device here, either using a device to represent the
> modem
Seriously? I don't see how adding a dummy device wouldn't be "bodging around the
core". Especially if using snd_soc_register_dais is.
> or registering the card using snd_soc_register_machine() and using
> a more meaningful name for the card seems like a sensible approach here.
Well, if were using snd_soc_register_machine to give the card a different name the
bluetooth-dai would still be named after the card, wouldn't it? So there is no
improvement here as to giving the dai a meaningful name.
- Lars
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
@ 2011-02-07 17:37 ` Lars-Peter Clausen
0 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-07 17:37 UTC (permalink / raw)
To: Mark Brown; +Cc: alsa-devel, linux-kernel, Liam Girdwood
On 02/07/2011 06:02 PM, Mark Brown wrote:
> Please fix your MUA to word wrap at less than 80 columns, I've reflowed
> your text so it's legible.
>
> On Mon, Feb 07, 2011 at 05:53:56PM +0100, Lars-Peter Clausen wrote:
>
>>> In any
>>> case, we clearly shouldn't be applying patches which bodge around the
>>> core.
>
>> Well the alternative would be a patch looking like this:
>
>> - .cpu_dai_name = "bluetooth-dai",
>> + .cpu_dai_name = "soc-core",
>
>> Which isn't really nice either.
>
> If you think the core isn't behaving helpfully the core should be
> changed. This is part of how APIs evolve to be maximally useful.
>
As I see it the problem is that we have a deviceless dai and there is not really a
way to register a dai without a device. But I have no idea right now how to change
the core to make it "behave helpfully".
And in a sense snd_soc_register_dais seems to be the right thing to use for now,
because the sound card as a whole has multiple dais they just not all registered at
the same time.
> To be honest it's not massively obvious that we shouldn't just be taking
> the name of the device here, either using a device to represent the
> modem
Seriously? I don't see how adding a dummy device wouldn't be "bodging around the
core". Especially if using snd_soc_register_dais is.
> or registering the card using snd_soc_register_machine() and using
> a more meaningful name for the card seems like a sensible approach here.
Well, if were using snd_soc_register_machine to give the card a different name the
bluetooth-dai would still be named after the card, wouldn't it? So there is no
improvement here as to giving the dai a meaningful name.
- Lars
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
2011-02-07 17:37 ` Lars-Peter Clausen
@ 2011-02-07 17:49 ` Mark Brown
-1 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-07 17:49 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: Liam Girdwood, alsa-devel, linux-kernel
As I said when replying to your previous mail and I'm sure some earlier
ones too you need to fix your MUA to word wrap at less than 80 columns.
I've yet again reflowed your text so that it's legible.
On Mon, Feb 07, 2011 at 06:37:03PM +0100, Lars-Peter Clausen wrote:
> On 02/07/2011 06:02 PM, Mark Brown wrote:
> > If you think the core isn't behaving helpfully the core should be
> > changed. This is part of how APIs evolve to be maximally useful.
> As I see it the problem is that we have a deviceless dai and there is
> not really a way to register a dai without a device. But I have no
> idea right now how to change the core to make it "behave helpfully".
You don't like the names the core is coming up with. Make better ones.
> And in a sense snd_soc_register_dais seems to be the right thing to
> use for now, because the sound card as a whole has multiple dais they
> just not all registered at the same time.
The card is only registering one DAI, all the other DAIs are attached to
other devices in the system.
> > To be honest it's not massively obvious that we shouldn't just be taking
> > the name of the device here, either using a device to represent the
> > modem
> Seriously? I don't see how adding a dummy device wouldn't be "bodging
> around the core". Especially if using snd_soc_register_dais is.
The bluetooth chip is an actual device which I can point to on the
board and schematic, having a struct device to represent a device that's
actually present doesn't seem like a great leap.
> > or registering the card using snd_soc_register_machine() and using
> > a more meaningful name for the card seems like a sensible approach here.
> Well, if were using snd_soc_register_machine to give the card a
> different name the bluetooth-dai would still be named after the card,
> wouldn't it? So there is no improvement here as to giving the dai a
> meaningful name.
It does mean it's named after the board.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
@ 2011-02-07 17:49 ` Mark Brown
0 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-07 17:49 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: alsa-devel, linux-kernel, Liam Girdwood
As I said when replying to your previous mail and I'm sure some earlier
ones too you need to fix your MUA to word wrap at less than 80 columns.
I've yet again reflowed your text so that it's legible.
On Mon, Feb 07, 2011 at 06:37:03PM +0100, Lars-Peter Clausen wrote:
> On 02/07/2011 06:02 PM, Mark Brown wrote:
> > If you think the core isn't behaving helpfully the core should be
> > changed. This is part of how APIs evolve to be maximally useful.
> As I see it the problem is that we have a deviceless dai and there is
> not really a way to register a dai without a device. But I have no
> idea right now how to change the core to make it "behave helpfully".
You don't like the names the core is coming up with. Make better ones.
> And in a sense snd_soc_register_dais seems to be the right thing to
> use for now, because the sound card as a whole has multiple dais they
> just not all registered at the same time.
The card is only registering one DAI, all the other DAIs are attached to
other devices in the system.
> > To be honest it's not massively obvious that we shouldn't just be taking
> > the name of the device here, either using a device to represent the
> > modem
> Seriously? I don't see how adding a dummy device wouldn't be "bodging
> around the core". Especially if using snd_soc_register_dais is.
The bluetooth chip is an actual device which I can point to on the
board and schematic, having a struct device to represent a device that's
actually present doesn't seem like a great leap.
> > or registering the card using snd_soc_register_machine() and using
> > a more meaningful name for the card seems like a sensible approach here.
> Well, if were using snd_soc_register_machine to give the card a
> different name the bluetooth-dai would still be named after the card,
> wouldn't it? So there is no improvement here as to giving the dai a
> meaningful name.
It does mean it's named after the board.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
2011-02-07 17:49 ` Mark Brown
@ 2011-02-07 18:09 ` Lars-Peter Clausen
-1 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-07 18:09 UTC (permalink / raw)
To: Mark Brown; +Cc: Liam Girdwood, alsa-devel, linux-kernel
On 02/07/2011 06:49 PM, Mark Brown wrote:
> As I said when replying to your previous mail and I'm sure some earlier
> ones too you need to fix your MUA to word wrap at less than 80 columns.
> I've yet again reflowed your text so that it's legible.
>
> On Mon, Feb 07, 2011 at 06:37:03PM +0100, Lars-Peter Clausen wrote:
>> On 02/07/2011 06:02 PM, Mark Brown wrote:
>
>>> If you think the core isn't behaving helpfully the core should be
>>> changed. This is part of how APIs evolve to be maximally useful.
>
>> As I see it the problem is that we have a deviceless dai and there is
>> not really a way to register a dai without a device. But I have no
>> idea right now how to change the core to make it "behave helpfully".
>
> You don't like the names the core is coming up with. Make better ones.
I don't like the the names a specific function of the core is coming up with, so I
used another one which names I like.
>
>> And in a sense snd_soc_register_dais seems to be the right thing to
>> use for now, because the sound card as a whole has multiple dais they
>> just not all registered at the same time.
>
> The card is only registering one DAI, all the other DAIs are attached to
> other devices in the system.
Isn't the card the combination of these other devices?
>
>>> To be honest it's not massively obvious that we shouldn't just be taking
>>> the name of the device here, either using a device to represent the
>>> modem
>
>> Seriously? I don't see how adding a dummy device wouldn't be "bodging
>> around the core". Especially if using snd_soc_register_dais is.
>
> The bluetooth chip is an actual device which I can point to on the
> board and schematic, having a struct device to represent a device that's
> actually present doesn't seem like a great leap.
Well, there is an actual device representing the bt device, but since this is the
standard bt usb device I have no idea how we would get an reference to it from within
the sound board driver.
>
>>> or registering the card using snd_soc_register_machine() and using
>>> a more meaningful name for the card seems like a sensible approach here.
>
>> Well, if were using snd_soc_register_machine to give the card a
>> different name the bluetooth-dai would still be named after the card,
>> wouldn't it? So there is no improvement here as to giving the dai a
>> meaningful name.
>
> It does mean it's named after the board.
Ok. Could you please explain how snd_soc_register_machine would work and how it would
effekt the naming of the dai? I couldn't find any reference to it.
- Lars
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
@ 2011-02-07 18:09 ` Lars-Peter Clausen
0 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-07 18:09 UTC (permalink / raw)
To: Mark Brown; +Cc: alsa-devel, linux-kernel, Liam Girdwood
On 02/07/2011 06:49 PM, Mark Brown wrote:
> As I said when replying to your previous mail and I'm sure some earlier
> ones too you need to fix your MUA to word wrap at less than 80 columns.
> I've yet again reflowed your text so that it's legible.
>
> On Mon, Feb 07, 2011 at 06:37:03PM +0100, Lars-Peter Clausen wrote:
>> On 02/07/2011 06:02 PM, Mark Brown wrote:
>
>>> If you think the core isn't behaving helpfully the core should be
>>> changed. This is part of how APIs evolve to be maximally useful.
>
>> As I see it the problem is that we have a deviceless dai and there is
>> not really a way to register a dai without a device. But I have no
>> idea right now how to change the core to make it "behave helpfully".
>
> You don't like the names the core is coming up with. Make better ones.
I don't like the the names a specific function of the core is coming up with, so I
used another one which names I like.
>
>> And in a sense snd_soc_register_dais seems to be the right thing to
>> use for now, because the sound card as a whole has multiple dais they
>> just not all registered at the same time.
>
> The card is only registering one DAI, all the other DAIs are attached to
> other devices in the system.
Isn't the card the combination of these other devices?
>
>>> To be honest it's not massively obvious that we shouldn't just be taking
>>> the name of the device here, either using a device to represent the
>>> modem
>
>> Seriously? I don't see how adding a dummy device wouldn't be "bodging
>> around the core". Especially if using snd_soc_register_dais is.
>
> The bluetooth chip is an actual device which I can point to on the
> board and schematic, having a struct device to represent a device that's
> actually present doesn't seem like a great leap.
Well, there is an actual device representing the bt device, but since this is the
standard bt usb device I have no idea how we would get an reference to it from within
the sound board driver.
>
>>> or registering the card using snd_soc_register_machine() and using
>>> a more meaningful name for the card seems like a sensible approach here.
>
>> Well, if were using snd_soc_register_machine to give the card a
>> different name the bluetooth-dai would still be named after the card,
>> wouldn't it? So there is no improvement here as to giving the dai a
>> meaningful name.
>
> It does mean it's named after the board.
Ok. Could you please explain how snd_soc_register_machine would work and how it would
effekt the naming of the dai? I couldn't find any reference to it.
- Lars
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
2011-02-07 18:09 ` Lars-Peter Clausen
@ 2011-02-07 18:17 ` Mark Brown
-1 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-07 18:17 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: Liam Girdwood, alsa-devel, linux-kernel
Once more I've reflowed your text. *Please* fix this, it's really
hurting the legibility of your mail.
On Mon, Feb 07, 2011 at 07:09:30PM +0100, Lars-Peter Clausen wrote:
> On 02/07/2011 06:49 PM, Mark Brown wrote:
> > The card is only registering one DAI, all the other DAIs are attached to
> > other devices in the system.
> Isn't the card the combination of these other devices?
Well, yes...
> > The bluetooth chip is an actual device which I can point to on the
> > board and schematic, having a struct device to represent a device that's
> > actually present doesn't seem like a great leap.
> Well, there is an actual device representing the bt device, but since
> this is the standard bt usb device I have no idea how we would get an
> reference to it from within the sound board driver.
If you've got a real device and a driver binding to it then you can make
the driver for that device register the DAI from its probe function, no
need for the machine driver to get involved.
> > It does mean it's named after the board.
> Ok. Could you please explain how snd_soc_register_machine would work
> and how it would effekt the naming of the dai? I couldn't find any
> reference to it.
Sorry, snd_soc_register_card(). This skips the soc-audio device and
allows the card to be registered from a regular device, meaning you can
do things like pass platform data in sanely and handle multiple boards
in a kernel without machine_is_() faff.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration
@ 2011-02-07 18:17 ` Mark Brown
0 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-07 18:17 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: alsa-devel, linux-kernel, Liam Girdwood
Once more I've reflowed your text. *Please* fix this, it's really
hurting the legibility of your mail.
On Mon, Feb 07, 2011 at 07:09:30PM +0100, Lars-Peter Clausen wrote:
> On 02/07/2011 06:49 PM, Mark Brown wrote:
> > The card is only registering one DAI, all the other DAIs are attached to
> > other devices in the system.
> Isn't the card the combination of these other devices?
Well, yes...
> > The bluetooth chip is an actual device which I can point to on the
> > board and schematic, having a struct device to represent a device that's
> > actually present doesn't seem like a great leap.
> Well, there is an actual device representing the bt device, but since
> this is the standard bt usb device I have no idea how we would get an
> reference to it from within the sound board driver.
If you've got a real device and a driver binding to it then you can make
the driver for that device register the DAI from its probe function, no
need for the machine driver to get involved.
> > It does mean it's named after the board.
> Ok. Could you please explain how snd_soc_register_machine would work
> and how it would effekt the naming of the dai? I couldn't find any
> reference to it.
Sorry, snd_soc_register_card(). This skips the soc-audio device and
allows the card to be registered from a regular device, meaning you can
do things like pass platform data in sanely and handle multiple boards
in a kernel without machine_is_() faff.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Adding bluetooth PCM interface support to ASoC (Was: Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration)
2011-02-07 18:17 ` Mark Brown
@ 2011-02-07 22:55 ` Lars-Peter Clausen
-1 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-07 22:55 UTC (permalink / raw)
To: Mark Brown; +Cc: Liam Girdwood, alsa-devel, linux-kernel, Marcel Holtmann "
On 02/07/2011 07:17 PM, Mark Brown wrote:
>>> The bluetooth chip is an actual device which I can point to on the
>>> board and schematic, having a struct device to represent a device that's
>>> actually present doesn't seem like a great leap.
>
>> Well, there is an actual device representing the bt device, but since
>> this is the standard bt usb device I have no idea how we would get an
>> reference to it from within the sound board driver.
>
> If you've got a real device and a driver binding to it then you can make
> the driver for that device register the DAI from its probe function, no
> need for the machine driver to get involved.
>
The audio hardware setup of the board looks roughly like this:
[### SOC ###]
| |
| USB | I2S
| |
[BT]----[Codec]----[Modem]
PCM Analog
So the bluetooth chip is handeld by the standard USB BT HCI driver.
I did some research on the topic and it seems that this is a pretty common
setup in embedded devices.
Audio to the bluetooth chip can either be send over the HCI interface (USB in
this case) from the CPU or over the PCM interface from the codec, so that audio
data from the modem to a bluetooth headset doesn't have to be routed through
the CPU.
The PCM interface seems to be part of the bluetooth standard and there are even
registers (PSKEY_PCM_CONFIG32) to configure the PCM format and bit-rate.
This and that neo1973 devices dont seem the only ones using such a setup, it
would naturally make sense to write an ASoC driver to negotiate the PCM format
between the codec and bluetooth chip and maybe do power management. (And
ofcourse register a dai_device).
But the bluetooth audio support seems to be entirely written in userspace. The
in-kernel bluetooth drivers in general seem only to provide a common interface
to the underlying hardware and all of the higher level functionality seems to
be implemented in userspace.
So right now I have no idea where to start if one wanted to add a ASoC driver
which did the bt-dai configuration.
I've Cced Marcel Holtmann and the bluez mailinglist, maybe someone can give
some input on subject.
- Lars
^ permalink raw reply [flat|nested] 36+ messages in thread
* Adding bluetooth PCM interface support to ASoC (Was: Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration)
@ 2011-02-07 22:55 ` Lars-Peter Clausen
0 siblings, 0 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-02-07 22:55 UTC (permalink / raw)
To: Mark Brown; +Cc: alsa-devel, Marcel Holtmann ", linux-kernel, Liam Girdwood
On 02/07/2011 07:17 PM, Mark Brown wrote:
>>> The bluetooth chip is an actual device which I can point to on the
>>> board and schematic, having a struct device to represent a device that's
>>> actually present doesn't seem like a great leap.
>
>> Well, there is an actual device representing the bt device, but since
>> this is the standard bt usb device I have no idea how we would get an
>> reference to it from within the sound board driver.
>
> If you've got a real device and a driver binding to it then you can make
> the driver for that device register the DAI from its probe function, no
> need for the machine driver to get involved.
>
The audio hardware setup of the board looks roughly like this:
[### SOC ###]
| |
| USB | I2S
| |
[BT]----[Codec]----[Modem]
PCM Analog
So the bluetooth chip is handeld by the standard USB BT HCI driver.
I did some research on the topic and it seems that this is a pretty common
setup in embedded devices.
Audio to the bluetooth chip can either be send over the HCI interface (USB in
this case) from the CPU or over the PCM interface from the codec, so that audio
data from the modem to a bluetooth headset doesn't have to be routed through
the CPU.
The PCM interface seems to be part of the bluetooth standard and there are even
registers (PSKEY_PCM_CONFIG32) to configure the PCM format and bit-rate.
This and that neo1973 devices dont seem the only ones using such a setup, it
would naturally make sense to write an ASoC driver to negotiate the PCM format
between the codec and bluetooth chip and maybe do power management. (And
ofcourse register a dai_device).
But the bluetooth audio support seems to be entirely written in userspace. The
in-kernel bluetooth drivers in general seem only to provide a common interface
to the underlying hardware and all of the higher level functionality seems to
be implemented in userspace.
So right now I have no idea where to start if one wanted to add a ASoC driver
which did the bt-dai configuration.
I've Cced Marcel Holtmann and the bluez mailinglist, maybe someone can give
some input on subject.
- Lars
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: Adding bluetooth PCM interface support to ASoC (Was: Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration)
2011-02-07 22:55 ` Lars-Peter Clausen
@ 2011-02-08 13:08 ` Mark Brown
-1 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-08 13:08 UTC (permalink / raw)
To: Lars-Peter Clausen
Cc: Liam Girdwood, alsa-devel, linux-kernel, Marcel Holtmann
On Mon, Feb 07, 2011 at 11:55:22PM +0100, Lars-Peter Clausen wrote:
> I did some research on the topic and it seems that this is a pretty common
> setup in embedded devices.
Yes, this is a totally vanilla setup except that for modern hardware the
baseband is connected digitally also.
> But the bluetooth audio support seems to be entirely written in userspace. The
> in-kernel bluetooth drivers in general seem only to provide a common interface
> to the underlying hardware and all of the higher level functionality seems to
> be implemented in userspace.
> So right now I have no idea where to start if one wanted to add a ASoC driver
> which did the bt-dai configuration.
The obvious starting point would seem to be to provide a driver which
allows userspace to tell the kernel about configuration changes - that's
what we're doing at the minute for the trivial case where the hardware
doesn't change configuration. We could then look at pushing more of the
code into the kernel if that made sense.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: Adding bluetooth PCM interface support to ASoC (Was: Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration)
@ 2011-02-08 13:08 ` Mark Brown
0 siblings, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-02-08 13:08 UTC (permalink / raw)
To: Lars-Peter Clausen
Cc: alsa-devel, Marcel Holtmann, linux-kernel, Liam Girdwood
On Mon, Feb 07, 2011 at 11:55:22PM +0100, Lars-Peter Clausen wrote:
> I did some research on the topic and it seems that this is a pretty common
> setup in embedded devices.
Yes, this is a totally vanilla setup except that for modern hardware the
baseband is connected digitally also.
> But the bluetooth audio support seems to be entirely written in userspace. The
> in-kernel bluetooth drivers in general seem only to provide a common interface
> to the underlying hardware and all of the higher level functionality seems to
> be implemented in userspace.
> So right now I have no idea where to start if one wanted to add a ASoC driver
> which did the bt-dai configuration.
The obvious starting point would seem to be to provide a driver which
allows userspace to tell the kernel about configuration changes - that's
what we're doing at the minute for the trivial case where the hardware
doesn't change configuration. We could then look at pushing more of the
code into the kernel if that made sense.
^ permalink raw reply [flat|nested] 36+ messages in thread
* RE: [alsa-devel] [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code.
2011-04-12 20:02 ` [alsa-devel] " Lars-Peter Clausen
2011-04-12 20:20 ` Mark Brown
@ 2011-04-13 22:33 ` Kukjin Kim
1 sibling, 0 replies; 36+ messages in thread
From: Kukjin Kim @ 2011-04-13 22:33 UTC (permalink / raw)
To: 'Lars-Peter Clausen', 'Mark Brown'
Cc: 'Liam Girdwood', alsa-devel, linux-kernel, 'Jassi Brar'
Lars-Peter Clausen wrote:
>
> On 03/07/2011 01:25 PM, Mark Brown wrote:
> > On Mon, Mar 07, 2011 at 11:04:38AM +0000, Liam Girdwood wrote:
> >
> >> Just had a quick look. All
> >
> >> Acked-by: Liam Girdwood <lrg@ti.com>
> >
> > Applied 1-6 - I'll wait for Kukjin to check patch 7 just in case he
> > wants it to go via his tree, there's no compile time dependency.
>
Oops, maybe I missed. Because he didn't send to me, Linux ARM Kernel mailing
list or Linux Samsung SoC mailing list at that time.
> Thanks.
>
> So far patch 7 (adding the dfbmcs320 platform device to gta02 mach file)
> hasn't
> been applied. Should I resent it, or do you still have it?
>
Anyway, I checked Mark's applying just now. It's ok to me :)
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [alsa-devel] [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code.
2011-04-12 20:02 ` [alsa-devel] " Lars-Peter Clausen
@ 2011-04-12 20:20 ` Mark Brown
2011-04-13 22:33 ` Kukjin Kim
1 sibling, 0 replies; 36+ messages in thread
From: Mark Brown @ 2011-04-12 20:20 UTC (permalink / raw)
To: Lars-Peter Clausen
Cc: Liam Girdwood, alsa-devel, linux-kernel, Jassi Brar, kgene.kim,
ben-linux
On Tue, Apr 12, 2011 at 10:02:46PM +0200, Lars-Peter Clausen wrote:
> So far patch 7 (adding the dfbmcs320 platform device to gta02 mach file) hasn't
> been applied. Should I resent it, or do you still have it?
Resend please.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [alsa-devel] [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code.
2011-03-07 12:25 ` Mark Brown
@ 2011-04-12 20:02 ` Lars-Peter Clausen
2011-04-12 20:20 ` Mark Brown
2011-04-13 22:33 ` Kukjin Kim
0 siblings, 2 replies; 36+ messages in thread
From: Lars-Peter Clausen @ 2011-04-12 20:02 UTC (permalink / raw)
To: Mark Brown; +Cc: Liam Girdwood, alsa-devel, linux-kernel, Jassi Brar, kgene.kim
On 03/07/2011 01:25 PM, Mark Brown wrote:
> On Mon, Mar 07, 2011 at 11:04:38AM +0000, Liam Girdwood wrote:
>
>> Just had a quick look. All
>
>> Acked-by: Liam Girdwood <lrg@ti.com>
>
> Applied 1-6 - I'll wait for Kukjin to check patch 7 just in case he
> wants it to go via his tree, there's no compile time dependency.
Thanks.
So far patch 7 (adding the dfbmcs320 platform device to gta02 mach file) hasn't
been applied. Should I resent it, or do you still have it?
- Lars
^ permalink raw reply [flat|nested] 36+ messages in thread
end of thread, other threads:[~2011-04-13 22:33 UTC | newest]
Thread overview: 36+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-02-06 23:04 [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code Lars-Peter Clausen
2011-02-06 23:04 ` [PATCH 2/7] ASoC: neo1973_wm8753: Move lm4857 specefic code to its own module Lars-Peter Clausen
2011-02-06 23:04 ` Lars-Peter Clausen
2011-02-07 11:50 ` Mark Brown
2011-02-07 11:50 ` Mark Brown
2011-02-06 23:04 ` [PATCH 3/7] ASoC: codecs: lm4857: Use dev_pm_ops Lars-Peter Clausen
2011-02-06 23:04 ` Lars-Peter Clausen
2011-02-06 23:04 ` [PATCH 4/7] ASoC: neo1973_gta02_wm8753: Remove lm4853_{set,get}_state Lars-Peter Clausen
2011-02-06 23:04 ` [PATCH 5/7] ASoC: Samsung: neo1973: Use gpio_request_array to request gpios Lars-Peter Clausen
2011-02-06 23:04 ` Lars-Peter Clausen
2011-02-06 23:04 ` [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration Lars-Peter Clausen
2011-02-07 11:59 ` Mark Brown
2011-02-07 11:59 ` Mark Brown
2011-02-07 16:53 ` Lars-Peter Clausen
2011-02-07 17:02 ` Mark Brown
2011-02-07 17:37 ` Lars-Peter Clausen
2011-02-07 17:37 ` Lars-Peter Clausen
2011-02-07 17:49 ` Mark Brown
2011-02-07 17:49 ` Mark Brown
2011-02-07 18:09 ` Lars-Peter Clausen
2011-02-07 18:09 ` Lars-Peter Clausen
2011-02-07 18:17 ` Mark Brown
2011-02-07 18:17 ` Mark Brown
2011-02-07 22:55 ` Adding bluetooth PCM interface support to ASoC (Was: Re: [PATCH 6/7] ASoC: Samsung: neo1973_gta02: Fix bluetooth DAI registration) Lars-Peter Clausen
2011-02-07 22:55 ` Lars-Peter Clausen
2011-02-08 13:08 ` Mark Brown
2011-02-08 13:08 ` Mark Brown
2011-02-06 23:04 ` [PATCH 7/7] ASoC: Samsung: Merge neo1937 and neo1973_gta02 sound board driver Lars-Peter Clausen
2011-02-07 2:25 ` [alsa-devel] [PATCH 1/7] ASoC: neo1973_wm8753: Remove scenario management code Jassi Brar
2011-02-07 11:42 ` Mark Brown
2011-02-07 11:42 ` Mark Brown
2011-02-07 17:01 ` Lars-Peter Clausen
2011-02-07 17:01 ` Lars-Peter Clausen
2011-03-07 7:04 Lars-Peter Clausen
2011-03-07 11:04 ` Liam Girdwood
2011-03-07 12:25 ` Mark Brown
2011-04-12 20:02 ` [alsa-devel] " Lars-Peter Clausen
2011-04-12 20:20 ` Mark Brown
2011-04-13 22:33 ` Kukjin Kim
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.