* [U-Boot] [PATCH] board: ls2085aqds: Update kernel_size env variable
@ 2016-01-06 5:00 Prabhakar Kushwaha
2016-01-14 18:06 ` york sun
2016-02-01 22:02 ` york sun
0 siblings, 2 replies; 7+ messages in thread
From: Prabhakar Kushwaha @ 2016-01-06 5:00 UTC (permalink / raw)
To: u-boot
kernel_size env variable is defined as 0x28000000, it is beyond NOR
flash.
Update kernel_size with 40MB kernel size.
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
---
include/configs/ls2080aqds.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index ba84248..a402c06 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -346,7 +346,7 @@ unsigned long get_board_ddr_clk(void);
"initrd_high=0xffffffffffffffff\0" \
"kernel_start=0x581100000\0" \
"kernel_load=0xa0000000\0" \
- "kernel_size=0x28000000\0"
+ "kernel_size=0x2800000\0"
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_FSL_MEMAC
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH] board: ls2085aqds: Update kernel_size env variable
2016-01-06 5:00 [U-Boot] [PATCH] board: ls2085aqds: Update kernel_size env variable Prabhakar Kushwaha
@ 2016-01-14 18:06 ` york sun
2016-01-15 4:53 ` Prabhakar Kushwaha
2016-01-21 22:48 ` Scott Wood
2016-02-01 22:02 ` york sun
1 sibling, 2 replies; 7+ messages in thread
From: york sun @ 2016-01-14 18:06 UTC (permalink / raw)
To: u-boot
On 01/05/2016 09:00 PM, Prabhakar Kushwaha wrote:
> kernel_size env variable is defined as 0x28000000, it is beyond NOR
> flash.
>
> Update kernel_size with 40MB kernel size.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> ---
> include/configs/ls2080aqds.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
> index ba84248..a402c06 100644
> --- a/include/configs/ls2080aqds.h
> +++ b/include/configs/ls2080aqds.h
> @@ -346,7 +346,7 @@ unsigned long get_board_ddr_clk(void);
> "initrd_high=0xffffffffffffffff\0" \
> "kernel_start=0x581100000\0" \
> "kernel_load=0xa0000000\0" \
> - "kernel_size=0x28000000\0"
> + "kernel_size=0x2800000\0"
>
> #ifdef CONFIG_FSL_MC_ENET
> #define CONFIG_FSL_MEMAC
>
Prabhakar,
I am tired of these changes. Can you go over all the default settings and verify
they all make sense? A short while ago Scott found fdt_high was not correct.
York
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH] board: ls2085aqds: Update kernel_size env variable
2016-01-14 18:06 ` york sun
@ 2016-01-15 4:53 ` Prabhakar Kushwaha
2016-01-27 17:39 ` york sun
2016-01-21 22:48 ` Scott Wood
1 sibling, 1 reply; 7+ messages in thread
From: Prabhakar Kushwaha @ 2016-01-15 4:53 UTC (permalink / raw)
To: u-boot
> -----Original Message-----
> From: york sun [mailto:york.sun at nxp.com]
> Sent: Thursday, January 14, 2016 11:37 PM
> To: Prabhakar Kushwaha <prabhakar@freescale.com>; u-boot at lists.denx.de
> Cc: Scott Wood <oss@buserror.net>
> Subject: Re: [PATCH] board: ls2085aqds: Update kernel_size env variable
>
> On 01/05/2016 09:00 PM, Prabhakar Kushwaha wrote:
> > kernel_size env variable is defined as 0x28000000, it is beyond NOR
> > flash.
> >
> > Update kernel_size with 40MB kernel size.
> >
> > Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> > ---
> > include/configs/ls2080aqds.h | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/include/configs/ls2080aqds.h
> > b/include/configs/ls2080aqds.h index ba84248..a402c06 100644
> > --- a/include/configs/ls2080aqds.h
> > +++ b/include/configs/ls2080aqds.h
> > @@ -346,7 +346,7 @@ unsigned long get_board_ddr_clk(void);
> > "initrd_high=0xffffffffffffffff\0" \
> > "kernel_start=0x581100000\0" \
> > "kernel_load=0xa0000000\0" \
> > - "kernel_size=0x28000000\0"
> > + "kernel_size=0x2800000\0"
> >
> > #ifdef CONFIG_FSL_MC_ENET
> > #define CONFIG_FSL_MEMAC
> >
> Prabhakar,
>
> I am tired of these changes. Can you go over all the default settings and
> verify they all make sense?
I agree.
Let me review all settings and provide one patch to fix all of them at once.
Do you want to hold this patch till I check and provide patch (if required)
>A short while ago Scott found fdt_high was not correct.
Is this change part of code or not?
--prabhakar
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH] board: ls2085aqds: Update kernel_size env variable
2016-01-15 4:53 ` Prabhakar Kushwaha
@ 2016-01-27 17:39 ` york sun
2016-01-28 6:36 ` Prabhakar Kushwaha
0 siblings, 1 reply; 7+ messages in thread
From: york sun @ 2016-01-27 17:39 UTC (permalink / raw)
To: u-boot
On 01/14/2016 08:53 PM, Prabhakar Kushwaha wrote:
>
>> -----Original Message-----
>> From: york sun [mailto:york.sun at nxp.com]
>> Sent: Thursday, January 14, 2016 11:37 PM
>> To: Prabhakar Kushwaha <prabhakar@freescale.com>; u-boot at lists.denx.de
>> Cc: Scott Wood <oss@buserror.net>
>> Subject: Re: [PATCH] board: ls2085aqds: Update kernel_size env variable
>>
>> On 01/05/2016 09:00 PM, Prabhakar Kushwaha wrote:
>>> kernel_size env variable is defined as 0x28000000, it is beyond NOR
>>> flash.
>>>
>>> Update kernel_size with 40MB kernel size.
>>>
>>> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
>>> ---
>>> include/configs/ls2080aqds.h | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/include/configs/ls2080aqds.h
>>> b/include/configs/ls2080aqds.h index ba84248..a402c06 100644
>>> --- a/include/configs/ls2080aqds.h
>>> +++ b/include/configs/ls2080aqds.h
>>> @@ -346,7 +346,7 @@ unsigned long get_board_ddr_clk(void);
>>> "initrd_high=0xffffffffffffffff\0" \
>>> "kernel_start=0x581100000\0" \
>>> "kernel_load=0xa0000000\0" \
>>> - "kernel_size=0x28000000\0"
>>> + "kernel_size=0x2800000\0"
>>>
>>> #ifdef CONFIG_FSL_MC_ENET
>>> #define CONFIG_FSL_MEMAC
>>>
>> Prabhakar,
>>
>> I am tired of these changes. Can you go over all the default settings and
>> verify they all make sense?
>
> I agree.
>
> Let me review all settings and provide one patch to fix all of them at once.
> Do you want to hold this patch till I check and provide patch (if required)
>
>> A short while ago Scott found fdt_high was not correct.
>
> Is this change part of code or not?
>
Prabhakar,
Do you have update on this patch?
York
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH] board: ls2085aqds: Update kernel_size env variable
2016-01-27 17:39 ` york sun
@ 2016-01-28 6:36 ` Prabhakar Kushwaha
0 siblings, 0 replies; 7+ messages in thread
From: Prabhakar Kushwaha @ 2016-01-28 6:36 UTC (permalink / raw)
To: u-boot
> -----Original Message-----
> From: york sun
> Sent: Wednesday, January 27, 2016 11:09 PM
> To: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>; u-
> boot at lists.denx.de
> Cc: Scott Wood <oss@buserror.net>
> Subject: Re: [PATCH] board: ls2085aqds: Update kernel_size env variable
>
> On 01/14/2016 08:53 PM, Prabhakar Kushwaha wrote:
> >
> >> -----Original Message-----
> >> From: york sun [mailto:york.sun at nxp.com]
> >> Sent: Thursday, January 14, 2016 11:37 PM
> >> To: Prabhakar Kushwaha <prabhakar@freescale.com>;
> >> u-boot at lists.denx.de
> >> Cc: Scott Wood <oss@buserror.net>
> >> Subject: Re: [PATCH] board: ls2085aqds: Update kernel_size env
> >> variable
> >>
> >> On 01/05/2016 09:00 PM, Prabhakar Kushwaha wrote:
> >>> kernel_size env variable is defined as 0x28000000, it is beyond NOR
> >>> flash.
> >>>
> >>> Update kernel_size with 40MB kernel size.
> >>>
> >>> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> >>> ---
> >>> include/configs/ls2080aqds.h | 2 +-
> >>> 1 file changed, 1 insertion(+), 1 deletion(-)
> >>>
> >>> diff --git a/include/configs/ls2080aqds.h
> >>> b/include/configs/ls2080aqds.h index ba84248..a402c06 100644
> >>> --- a/include/configs/ls2080aqds.h
> >>> +++ b/include/configs/ls2080aqds.h
> >>> @@ -346,7 +346,7 @@ unsigned long get_board_ddr_clk(void);
> >>> "initrd_high=0xffffffffffffffff\0" \
> >>> "kernel_start=0x581100000\0" \
> >>> "kernel_load=0xa0000000\0" \
> >>> - "kernel_size=0x28000000\0"
> >>> + "kernel_size=0x2800000\0"
> >>>
> >>> #ifdef CONFIG_FSL_MC_ENET
> >>> #define CONFIG_FSL_MEMAC
> >>>
> >> Prabhakar,
> >>
> >> I am tired of these changes. Can you go over all the default settings
> >> and verify they all make sense?
> >
> > I agree.
> >
> > Let me review all settings and provide one patch to fix all of them at once.
> > Do you want to hold this patch till I check and provide patch (if
> > required)
> >
> >> A short while ago Scott found fdt_high was not correct.
> >
> > Is this change part of code or not?
> >
>
> Prabhakar,
>
> Do you have update on this patch?
>
I compared both QDS and RDB configuration files. They will be equal after merger of this patch.
No patch update is required.
--prabhakar
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH] board: ls2085aqds: Update kernel_size env variable
2016-01-14 18:06 ` york sun
2016-01-15 4:53 ` Prabhakar Kushwaha
@ 2016-01-21 22:48 ` Scott Wood
1 sibling, 0 replies; 7+ messages in thread
From: Scott Wood @ 2016-01-21 22:48 UTC (permalink / raw)
To: u-boot
On Thu, 2016-01-14 at 18:06 +0000, york sun wrote:
> On 01/05/2016 09:00 PM, Prabhakar Kushwaha wrote:
> > kernel_size env variable is defined as 0x28000000, it is beyond NOR
> > flash.
> >
> > Update kernel_size with 40MB kernel size.
> >
> > Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> > ---
> > include/configs/ls2080aqds.h | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
> > index ba84248..a402c06 100644
> > --- a/include/configs/ls2080aqds.h
> > +++ b/include/configs/ls2080aqds.h
> > @@ -346,7 +346,7 @@ unsigned long get_board_ddr_clk(void);
> > "initrd_high=0xffffffffffffffff\0" \
> > "kernel_start=0x581100000\0" \
> > "kernel_load=0xa0000000\0" \
> > - "kernel_size=0x28000000\0"
> > + "kernel_size=0x2800000\0"
> >
> > #ifdef CONFIG_FSL_MC_ENET
> > #define CONFIG_FSL_MEMAC
> >
> Prabhakar,
>
> I am tired of these changes. Can you go over all the default settings and
> verify
> they all make sense? A short while ago Scott found fdt_high was not correct.
That was ls1021a.
-Scott
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH] board: ls2085aqds: Update kernel_size env variable
2016-01-06 5:00 [U-Boot] [PATCH] board: ls2085aqds: Update kernel_size env variable Prabhakar Kushwaha
2016-01-14 18:06 ` york sun
@ 2016-02-01 22:02 ` york sun
1 sibling, 0 replies; 7+ messages in thread
From: york sun @ 2016-02-01 22:02 UTC (permalink / raw)
To: u-boot
On 01/05/2016 09:00 PM, Prabhakar Kushwaha wrote:
> kernel_size env variable is defined as 0x28000000, it is beyond NOR
> flash.
>
> Update kernel_size with 40MB kernel size.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> ---
Applied to u-boot-fsl-qoriq master branch. Awaiting upstream.
Thanks.
York
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-02-01 22:02 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-01-06 5:00 [U-Boot] [PATCH] board: ls2085aqds: Update kernel_size env variable Prabhakar Kushwaha
2016-01-14 18:06 ` york sun
2016-01-15 4:53 ` Prabhakar Kushwaha
2016-01-27 17:39 ` york sun
2016-01-28 6:36 ` Prabhakar Kushwaha
2016-01-21 22:48 ` Scott Wood
2016-02-01 22:02 ` york sun
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.