From: Ming Qian <ming.qian@nxp.com> To: Nicolas Dufresne <nicolas@ndufresne.ca>, "mchehab@kernel.org" <mchehab@kernel.org>, "shawnguo@kernel.org" <shawnguo@kernel.org>, "robh+dt@kernel.org" <robh+dt@kernel.org>, "s.hauer@pengutronix.de" <s.hauer@pengutronix.de> Cc: "hverkuil-cisco@xs4all.nl" <hverkuil-cisco@xs4all.nl>, "kernel@pengutronix.de" <kernel@pengutronix.de>, "festevam@gmail.com" <festevam@gmail.com>, dl-linux-imx <linux-imx@nxp.com>, Aisheng Dong <aisheng.dong@nxp.com>, "linux-media@vger.kernel.org" <linux-media@vger.kernel.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Subject: RE: [EXT] Re: [PATCH v12 00/13] amphion video decoder/encoder driver Date: Wed, 24 Nov 2021 09:00:12 +0000 [thread overview] Message-ID: <AM6PR04MB6341BF1FB2A839961DBADF4EE7619@AM6PR04MB6341.eurprd04.prod.outlook.com> (raw) In-Reply-To: <9947131322e034bb6336802e5afb4b6132ca5071.camel@ndufresne.ca> > -----Original Message----- > From: Nicolas Dufresne [mailto:nicolas@ndufresne.ca] > Sent: Wednesday, November 24, 2021 3:23 AM > To: Ming Qian <ming.qian@nxp.com>; mchehab@kernel.org; > shawnguo@kernel.org; robh+dt@kernel.org; s.hauer@pengutronix.de > Cc: hverkuil-cisco@xs4all.nl; kernel@pengutronix.de; festevam@gmail.com; > dl-linux-imx <linux-imx@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>; > linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org > Subject: [EXT] Re: [PATCH v12 00/13] amphion video decoder/encoder driver > > Caution: EXT Email > > Hi Ming, > > For the patchset: > > Tested-By: Nicolas Dufresne <nicolas.dufresne@collabora.com> > > I've validated encoding manually with GStreamer: > > gst-launch-1.0 videotestsrc num-buffers=100 ! v4l2h264enc ! > video/x-h264,profile=main,level=\(string\)2 ! h264parse ! qtmux ! filesink > location=test.mov > > I've also verify the that the number of frames was exactly 100, this is common > issue with V4L2 encoders. Then I have validated VP8, H.264 and H.265 > decoders > using fluster [0] with this PR [1] applied. You can find full summary at the end > of this email. Markdown report didn't get generated, I will have to check with > upstream fluster if there is a regression. > > $> ./fluster.py run -s -so amphion-imx8qxp-conformance.md -d > GStreamer-VP8-V4L2-Gst1.0 GStreamer-H.264-V4L2-Gst1.0 > GStreamer-H.265-V4L2-Gst1.0 > > VP8: Ran 59/61 tests successfully in 131.788 secs > H.264: Ran 75/135 tests successfully in 501.206 secs > H.265: Ran 126/147 tests successfully in 1131.933 secs > > Note that in mainline, only 1 core get fired and is kept at its lowest possible > frequency, so perhaps it may cause some of the timeout seen. The driver is > overall functional, and I would like to thank you for this extra work. Also, > note that this very first time I run Fluster over the stateful CODEC wrappers. I > will need to run this on more platforms to locate the GStreamer specific fail. > > VP8 note, conformance vector vp80-03-segmentation-1425 cause a hang but it > then > recover: > > [ 8264.851841] amphion-vpu-core 2d040000.vpu_core: [0] sync session > timeout > [ 8264.858634] amphion-vpu-core 2d040000.vpu_core: [0] send cmd(0x2) fail > [ 8264.867992] amphion-vpu-core 2d040000.vpu_core: [0] start fail > [ 8264.905173] amphion-vpu-core 2d040000.vpu_core: reset hang core > HI Nicolas There is a bug in firmware that if send a command to firmware too close after stop cmd, The firmware may enter wfi wrong, and led to hang issue you met in vp80-03-segmentation-1425. I'll add a workaround in driver that add a delay after send stop cmd to firmware in next version. Because the amphion's vpu doesn't support to output i420, so the test will convert nv12_8l128 to i420 by videoconvert, it leds to most of timeout failure. The FM1_BT_B.h264 can't be decoded by amphion's vpu, the vpu is keeping parse sequence header, and it led to timeout failure. I run the test and change the timeout to 300, then most of timeout failures are gone. Besides that, my result is almost as same as yours. The failures of assertion error means that the vpu's output is different from the pattern, I think it should be the vpu's limitation. > > See comments about your GStreamer MR below... > > [0] > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub. > com%2Ffluendo%2Ffluster&data=04%7C01%7Cming.qian%40nxp.com%7 > C45d33490bfe546aa8e1408d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c3 > 01635%7C0%7C0%7C637732921809373007%7CUnknown%7CTWFpbGZsb3d > 8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3 > D%7C3000&sdata=bBqADaZ9ZN00SbCPalQE5fN740hB2bMUxHDL4QEki > mg%3D&reserved=0 > [1] > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub. > com%2Ffluendo%2Ffluster%2Fpull%2F98&data=04%7C01%7Cming.qian > %40nxp.com%7C45d33490bfe546aa8e1408d9aeb6a822%7C686ea1d3bc2b4c > 6fa92cd99c5c301635%7C0%7C0%7C637732921809382989%7CUnknown%7C > TWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLC > JXVCI6Mn0%3D%7C3000&sdata=90dUC%2FNzK%2BcFNSMwY7bgQ0iD8 > ctBwU%2FMhyrLoBBEf4g%3D&reserved=0 > > > [...] > > encoder is tested with gstreamer > > decoder is tested with gstreamer, but the following patches are required: > > GStreamer is now a single repo (and using main branch instead of master), I > have > migrated your 3 MRs into 2 MRs. Thank you very much. > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.fr > eedesktop.org%2Fgstreamer%2Fgst-plugins-base%2F-%2Fmerge_requests%2F > 1252&data=04%7C01%7Cming.qian%40nxp.com%7C45d33490bfe546aa > 8e1408d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7 > C637732921809382989%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAw > MDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sda > ta=G4PnqxRsnPjQtV%2FUcp4dkoz9fAGxkOv%2FzKR47RaHtu0%3D&reser > ved=0 > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.fr > eedesktop.org%2Fgstreamer%2Fgst-plugins-good%2F-%2Fmerge_requests%2F > 1098&data=04%7C01%7Cming.qian%40nxp.com%7C45d33490bfe546aa > 8e1408d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7 > C637732921809382989%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAw > MDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sda > ta=h6nEISAaiG54NPz9Xw0MiSNDx2QxWsNWyG7FLSAaLgI%3D&reserved > =0 > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.fr > eedesktop.org%2Fgstreamer%2Fgstreamer%2F-%2Fmerge_requests%2F1379& > amp;data=04%7C01%7Cming.qian%40nxp.com%7C45d33490bfe546aa8e140 > 8d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6377 > 32921809382989%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiL > CJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=PFe > Db4v%2BmiksgvJ08KgncRjZEt7GdMO7gV8hV0DD0uY%3D&reserved=0 > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.fr > eedesktop.org%2Fgstreamer%2Fgst-plugins-good%2F-%2Fmerge_requests%2F > 1099&data=04%7C01%7Cming.qian%40nxp.com%7C45d33490bfe546aa > 8e1408d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7 > C637732921809382989%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAw > MDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sda > ta=e6hSDpiP2scLN5C0f8Fb%2FoMbt8k4zC45qWPrQpG%2Fe5A%3D&rese > rved=0 > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.fr > eedesktop.org%2Fgstreamer%2Fgstreamer%2F-%2Fmerge_requests%2F1381& > amp;data=04%7C01%7Cming.qian%40nxp.com%7C45d33490bfe546aa8e140 > 8d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6377 > 32921809382989%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiL > CJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=xkX > WjCsgVaLb0wZgfaXDMiBchtbJBNnwtZNhKe42k5o%3D&reserved=0 > > > regards, > Nicolas > > [JVT-AVC_V1] (GStreamer-H.264-V4L2-Gst1.0) FM1_BT_B ... > Timeout The vpu can't decode this stream. > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > AMP_D_Hisilicon_3 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > AMP_E_Hisilicon_3 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > AMP_F_Hisilicon_3 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > BUMPING_A_ericsson_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > CONFWIN_A_Sony_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > DELTAQP_A_BRCM_4 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > MVDL1ZERO_A_docomo_4 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > NoOutPrior_A_Qualcomm_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > NoOutPrior_B_Qualcomm_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > NUT_A_ericsson_5 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > PICSIZE_A_Bossen_1 ... Error The size is 1056x8440, vpu doesn't support it > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > PICSIZE_B_Bossen_1 ... Error The size is 8440x1056, vpu doesn't support it > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > PICSIZE_C_Bossen_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > PICSIZE_D_Bossen_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > RAP_B_Bossen_2 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > SAODBLK_A_MainConcept_4 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > SAODBLK_B_MainConcept_4 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > TILES_A_Cisco_2 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > TILES_B_Cisco_1 ... Timeout Performance issue of videoconvert, but assert fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > TSUNEQBD_A_MAIN10_Technicolor_2 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > VPSSPSPPS_A_MainConcept_1 ... Error Gstream report error: ERROR Error from element /GstPlayBin:playbin/GstURIDecodeBin:uridecodebin0/GstDecodeBin:decodebin0/v4l2h265dec:v4l2h265dec0: Could not read from resource. Could not read from resource. ../sys/v4l2/gstv4l2bufferpool.c(1155): gst_v4l2_buffer_pool_poll (): /GstPlayBin:playbin/GstURIDecodeBin:uridecodebin0/GstDecodeBin:decodebin0/v4l2h265dec:v4l2h265dec0: poll error 1: Success (0) for /mnt/fluster/resources/JCT-VC-HEVC_V1/VPSSPSPPS_A_MainConcept_1/VPSSPSPPS_A_MainConcept_1.bin > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2-Gst1.0) > vp80-03-segmentation-1425 ... Timeout Firmware bug, after apply driver workaround, assert fail > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2-Gst1.0) > vp80-03-segmentation-1436 ... Fail > >
WARNING: multiple messages have this Message-ID (diff)
From: Ming Qian <ming.qian@nxp.com> To: Nicolas Dufresne <nicolas@ndufresne.ca>, "mchehab@kernel.org" <mchehab@kernel.org>, "shawnguo@kernel.org" <shawnguo@kernel.org>, "robh+dt@kernel.org" <robh+dt@kernel.org>, "s.hauer@pengutronix.de" <s.hauer@pengutronix.de> Cc: "hverkuil-cisco@xs4all.nl" <hverkuil-cisco@xs4all.nl>, "kernel@pengutronix.de" <kernel@pengutronix.de>, "festevam@gmail.com" <festevam@gmail.com>, dl-linux-imx <linux-imx@nxp.com>, Aisheng Dong <aisheng.dong@nxp.com>, "linux-media@vger.kernel.org" <linux-media@vger.kernel.org>, "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org> Subject: RE: [EXT] Re: [PATCH v12 00/13] amphion video decoder/encoder driver Date: Wed, 24 Nov 2021 09:00:12 +0000 [thread overview] Message-ID: <AM6PR04MB6341BF1FB2A839961DBADF4EE7619@AM6PR04MB6341.eurprd04.prod.outlook.com> (raw) In-Reply-To: <9947131322e034bb6336802e5afb4b6132ca5071.camel@ndufresne.ca> > -----Original Message----- > From: Nicolas Dufresne [mailto:nicolas@ndufresne.ca] > Sent: Wednesday, November 24, 2021 3:23 AM > To: Ming Qian <ming.qian@nxp.com>; mchehab@kernel.org; > shawnguo@kernel.org; robh+dt@kernel.org; s.hauer@pengutronix.de > Cc: hverkuil-cisco@xs4all.nl; kernel@pengutronix.de; festevam@gmail.com; > dl-linux-imx <linux-imx@nxp.com>; Aisheng Dong <aisheng.dong@nxp.com>; > linux-media@vger.kernel.org; linux-kernel@vger.kernel.org; > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org > Subject: [EXT] Re: [PATCH v12 00/13] amphion video decoder/encoder driver > > Caution: EXT Email > > Hi Ming, > > For the patchset: > > Tested-By: Nicolas Dufresne <nicolas.dufresne@collabora.com> > > I've validated encoding manually with GStreamer: > > gst-launch-1.0 videotestsrc num-buffers=100 ! v4l2h264enc ! > video/x-h264,profile=main,level=\(string\)2 ! h264parse ! qtmux ! filesink > location=test.mov > > I've also verify the that the number of frames was exactly 100, this is common > issue with V4L2 encoders. Then I have validated VP8, H.264 and H.265 > decoders > using fluster [0] with this PR [1] applied. You can find full summary at the end > of this email. Markdown report didn't get generated, I will have to check with > upstream fluster if there is a regression. > > $> ./fluster.py run -s -so amphion-imx8qxp-conformance.md -d > GStreamer-VP8-V4L2-Gst1.0 GStreamer-H.264-V4L2-Gst1.0 > GStreamer-H.265-V4L2-Gst1.0 > > VP8: Ran 59/61 tests successfully in 131.788 secs > H.264: Ran 75/135 tests successfully in 501.206 secs > H.265: Ran 126/147 tests successfully in 1131.933 secs > > Note that in mainline, only 1 core get fired and is kept at its lowest possible > frequency, so perhaps it may cause some of the timeout seen. The driver is > overall functional, and I would like to thank you for this extra work. Also, > note that this very first time I run Fluster over the stateful CODEC wrappers. I > will need to run this on more platforms to locate the GStreamer specific fail. > > VP8 note, conformance vector vp80-03-segmentation-1425 cause a hang but it > then > recover: > > [ 8264.851841] amphion-vpu-core 2d040000.vpu_core: [0] sync session > timeout > [ 8264.858634] amphion-vpu-core 2d040000.vpu_core: [0] send cmd(0x2) fail > [ 8264.867992] amphion-vpu-core 2d040000.vpu_core: [0] start fail > [ 8264.905173] amphion-vpu-core 2d040000.vpu_core: reset hang core > HI Nicolas There is a bug in firmware that if send a command to firmware too close after stop cmd, The firmware may enter wfi wrong, and led to hang issue you met in vp80-03-segmentation-1425. I'll add a workaround in driver that add a delay after send stop cmd to firmware in next version. Because the amphion's vpu doesn't support to output i420, so the test will convert nv12_8l128 to i420 by videoconvert, it leds to most of timeout failure. The FM1_BT_B.h264 can't be decoded by amphion's vpu, the vpu is keeping parse sequence header, and it led to timeout failure. I run the test and change the timeout to 300, then most of timeout failures are gone. Besides that, my result is almost as same as yours. The failures of assertion error means that the vpu's output is different from the pattern, I think it should be the vpu's limitation. > > See comments about your GStreamer MR below... > > [0] > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub. > com%2Ffluendo%2Ffluster&data=04%7C01%7Cming.qian%40nxp.com%7 > C45d33490bfe546aa8e1408d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c3 > 01635%7C0%7C0%7C637732921809373007%7CUnknown%7CTWFpbGZsb3d > 8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3 > D%7C3000&sdata=bBqADaZ9ZN00SbCPalQE5fN740hB2bMUxHDL4QEki > mg%3D&reserved=0 > [1] > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub. > com%2Ffluendo%2Ffluster%2Fpull%2F98&data=04%7C01%7Cming.qian > %40nxp.com%7C45d33490bfe546aa8e1408d9aeb6a822%7C686ea1d3bc2b4c > 6fa92cd99c5c301635%7C0%7C0%7C637732921809382989%7CUnknown%7C > TWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLC > JXVCI6Mn0%3D%7C3000&sdata=90dUC%2FNzK%2BcFNSMwY7bgQ0iD8 > ctBwU%2FMhyrLoBBEf4g%3D&reserved=0 > > > [...] > > encoder is tested with gstreamer > > decoder is tested with gstreamer, but the following patches are required: > > GStreamer is now a single repo (and using main branch instead of master), I > have > migrated your 3 MRs into 2 MRs. Thank you very much. > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.fr > eedesktop.org%2Fgstreamer%2Fgst-plugins-base%2F-%2Fmerge_requests%2F > 1252&data=04%7C01%7Cming.qian%40nxp.com%7C45d33490bfe546aa > 8e1408d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7 > C637732921809382989%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAw > MDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sda > ta=G4PnqxRsnPjQtV%2FUcp4dkoz9fAGxkOv%2FzKR47RaHtu0%3D&reser > ved=0 > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.fr > eedesktop.org%2Fgstreamer%2Fgst-plugins-good%2F-%2Fmerge_requests%2F > 1098&data=04%7C01%7Cming.qian%40nxp.com%7C45d33490bfe546aa > 8e1408d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7 > C637732921809382989%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAw > MDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sda > ta=h6nEISAaiG54NPz9Xw0MiSNDx2QxWsNWyG7FLSAaLgI%3D&reserved > =0 > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.fr > eedesktop.org%2Fgstreamer%2Fgstreamer%2F-%2Fmerge_requests%2F1379& > amp;data=04%7C01%7Cming.qian%40nxp.com%7C45d33490bfe546aa8e140 > 8d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6377 > 32921809382989%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiL > CJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=PFe > Db4v%2BmiksgvJ08KgncRjZEt7GdMO7gV8hV0DD0uY%3D&reserved=0 > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.fr > eedesktop.org%2Fgstreamer%2Fgst-plugins-good%2F-%2Fmerge_requests%2F > 1099&data=04%7C01%7Cming.qian%40nxp.com%7C45d33490bfe546aa > 8e1408d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7 > C637732921809382989%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAw > MDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sda > ta=e6hSDpiP2scLN5C0f8Fb%2FoMbt8k4zC45qWPrQpG%2Fe5A%3D&rese > rved=0 > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.fr > eedesktop.org%2Fgstreamer%2Fgstreamer%2F-%2Fmerge_requests%2F1381& > amp;data=04%7C01%7Cming.qian%40nxp.com%7C45d33490bfe546aa8e140 > 8d9aeb6a822%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6377 > 32921809382989%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiL > CJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000&sdata=xkX > WjCsgVaLb0wZgfaXDMiBchtbJBNnwtZNhKe42k5o%3D&reserved=0 > > > regards, > Nicolas > > [JVT-AVC_V1] (GStreamer-H.264-V4L2-Gst1.0) FM1_BT_B ... > Timeout The vpu can't decode this stream. > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > AMP_D_Hisilicon_3 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > AMP_E_Hisilicon_3 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > AMP_F_Hisilicon_3 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > BUMPING_A_ericsson_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > CONFWIN_A_Sony_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > DELTAQP_A_BRCM_4 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > MVDL1ZERO_A_docomo_4 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > NoOutPrior_A_Qualcomm_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > NoOutPrior_B_Qualcomm_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > NUT_A_ericsson_5 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > PICSIZE_A_Bossen_1 ... Error The size is 1056x8440, vpu doesn't support it > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > PICSIZE_B_Bossen_1 ... Error The size is 8440x1056, vpu doesn't support it > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > PICSIZE_C_Bossen_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > PICSIZE_D_Bossen_1 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > RAP_B_Bossen_2 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > SAODBLK_A_MainConcept_4 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > SAODBLK_B_MainConcept_4 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > TILES_A_Cisco_2 ... Timeout Performance issue of videoconvert > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > TILES_B_Cisco_1 ... Timeout Performance issue of videoconvert, but assert fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > TSUNEQBD_A_MAIN10_Technicolor_2 ... Fail > [JCT-VC-HEVC_V1] (GStreamer-H.265-V4L2-Gst1.0) > VPSSPSPPS_A_MainConcept_1 ... Error Gstream report error: ERROR Error from element /GstPlayBin:playbin/GstURIDecodeBin:uridecodebin0/GstDecodeBin:decodebin0/v4l2h265dec:v4l2h265dec0: Could not read from resource. Could not read from resource. ../sys/v4l2/gstv4l2bufferpool.c(1155): gst_v4l2_buffer_pool_poll (): /GstPlayBin:playbin/GstURIDecodeBin:uridecodebin0/GstDecodeBin:decodebin0/v4l2h265dec:v4l2h265dec0: poll error 1: Success (0) for /mnt/fluster/resources/JCT-VC-HEVC_V1/VPSSPSPPS_A_MainConcept_1/VPSSPSPPS_A_MainConcept_1.bin > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2-Gst1.0) > vp80-03-segmentation-1425 ... Timeout Firmware bug, after apply driver workaround, assert fail > [VP8-TEST-VECTORS] (GStreamer-VP8-V4L2-Gst1.0) > vp80-03-segmentation-1436 ... Fail > > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-11-24 9:00 UTC|newest] Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-09 9:08 [PATCH v12 00/13] amphion video decoder/encoder driver Ming Qian 2021-11-09 9:08 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 01/13] dt-bindings: media: amphion: add amphion video codec bindings Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 02/13] media:Add nv12mt_8l128 and nv12mt_10be_8l128 video format Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 03/13] media: amphion: add amphion vpu device driver Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 04/13] media: amphion: add vpu core driver Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 05/13] media: amphion: implement vpu core communication based on mailbox Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 06/13] media: amphion: add vpu v4l2 m2m support Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 07/13] media: amphion: add v4l2 m2m vpu encoder stateful driver Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 08/13] media: amphion: add v4l2 m2m vpu decoder " Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 09/13] media: amphion: implement windsor encoder rpc interface Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 10/13] media: amphion: implement malone decoder " Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 11/13] ARM64: dts: freescale: imx8q: add imx vpu codec entries Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 12/13] firmware: imx: scu-pd: imx8q: add vpu mu resources Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 9:09 ` [PATCH v12 13/13] MAINTAINERS: add AMPHION VPU CODEC V4L2 driver entry Ming Qian 2021-11-09 9:09 ` Ming Qian 2021-11-09 15:46 ` [PATCH v12 00/13] amphion video decoder/encoder driver Nicolas Dufresne 2021-11-09 15:46 ` Nicolas Dufresne 2021-11-23 19:22 ` Nicolas Dufresne 2021-11-23 19:22 ` Nicolas Dufresne 2021-11-24 9:00 ` Ming Qian [this message] 2021-11-24 9:00 ` [EXT] " Ming Qian 2021-11-24 14:57 ` Nicolas Dufresne 2021-11-24 14:57 ` Nicolas Dufresne 2021-11-25 5:25 ` Ming Qian 2021-11-25 5:25 ` Ming Qian 2021-11-25 15:36 ` Nicolas Dufresne 2021-11-25 15:36 ` Nicolas Dufresne 2021-11-26 6:31 ` Ming Qian 2021-11-26 6:31 ` Ming Qian 2021-12-03 4:09 ` Nicolas Dufresne 2021-12-03 4:09 ` Nicolas Dufresne 2021-12-03 5:20 ` Ming Qian 2021-12-03 5:20 ` Ming Qian
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=AM6PR04MB6341BF1FB2A839961DBADF4EE7619@AM6PR04MB6341.eurprd04.prod.outlook.com \ --to=ming.qian@nxp.com \ --cc=aisheng.dong@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=hverkuil-cisco@xs4all.nl \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=mchehab@kernel.org \ --cc=nicolas@ndufresne.ca \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.