[PATCH v2 00/12] AT91 pm cleanup for 3.20

[PATCH v2 00/12] AT91 pm cleanup for 3.20

[Wenyou Yang]

Hi Nicolas,

This version is rebased on the branch: at91-3.20-cleanup of the repository
	git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git

It is purpose to clean up the PM code, includes the patches from Peter Rosin and Sylvain Rochet.

Since verifying the USB clock and USB PLL disabling before suspending to memory,
it aslo depends on the following patch serials from Sylvain:
	[PATCHv6 0/5] USB: gadget: atmel_usba_udc: Driver improvements
	[PATCHv7 0/6] USB: host: Atmel OHCI and EHCI drivers improvements

Removes CONFIG_AT91_SLOW_CLOCK config item to simply the PM config,
The suspend to standby mode uses the same sram function as the suspend to memory mode.
Remove some unused code.

Alexandr & Sylvain, Thank you very much for so many feedbacks.

Changes in v2:
 - Rebase on the at91-3.20-cleanup branch
 - Recover the verify clock condition, only for suspend to memory.
 - Collect ACK from Alexandre
 - Add the macro for PM mode

Peter Rosin (1):
  pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

Sylvain Rochet (1):
  pm: at91: pm_slowclock: improve reliability of suspend/resume

Wenyou Yang (10):
  pm: at91: pm_slowclock: remove the unused code related with
    SLOWDOWN_MASTER_CLOCK
  pm: at91: move the copying the sram function to the sram
    initializationi phase
  ARM: at91: move select SRAM to ARCH_AT91
  pm: at91: remove the config item CONFIG_AT91_SLOW_CLOCK
  pm: at91: the standby mode uses the same sram function as the suspend
    to memory mode
  pm: at91: rename file name: pm_slowclock.S -->pm_suspend.S
  pm: at91: rename function name:
    at91_slow_clock()-->at91_pm_suspend_sram_fn
  pm: at91: remove the at91_xxx_standby() function definitions in the
    pm.h
  pm: at91: setup: remove the struct ramc_ids .data at91_xxx_standby
    members
  pm: at91: amend the pm_suspend entry for at91_cpuidle_device
arch/arm/mach-at91/Kconfig         |   17 +-
 arch/arm/mach-at91/Makefile        |    2 +-
 arch/arm/mach-at91/pm.c            |  143 ++++++++--------
 arch/arm/mach-at91/pm.h            |  100 +----------
 arch/arm/mach-at91/pm_slowclock.S  |  323 ------------------------------------
 arch/arm/mach-at91/pm_suspend.S    |  277 +++++++++++++++++++++++++++++++
 arch/arm/mach-at91/setup.c         |   19 +--
 include/soc/at91/at91sam9_ddrsdr.h |    2 +-
 8 files changed, 362 insertions(+), 521 deletions(-)
 delete mode 100644 arch/arm/mach-at91/pm_slowclock.S
 create mode 100644 arch/arm/mach-at91/pm_suspend.S

-- 
1.7.9.5

[PATCH v2 00/12] AT91 pm cleanup for 3.20

[Wenyou Yang]

Hi Nicolas,

This version is rebased on the branch: at91-3.20-cleanup of the repository
	git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git

It is purpose to clean up the PM code, includes the patches from Peter Rosin and Sylvain Rochet.

Since verifying the USB clock and USB PLL disabling before suspending to memory,
it aslo depends on the following patch serials from Sylvain:
	[PATCHv6 0/5] USB: gadget: atmel_usba_udc: Driver improvements
	[PATCHv7 0/6] USB: host: Atmel OHCI and EHCI drivers improvements

Removes CONFIG_AT91_SLOW_CLOCK config item to simply the PM config,
The suspend to standby mode uses the same sram function as the suspend to memory mode.
Remove some unused code.

Alexandr & Sylvain, Thank you very much for so many feedbacks.

Changes in v2:
 - Rebase on the at91-3.20-cleanup branch
 - Recover the verify clock condition, only for suspend to memory.
 - Collect ACK from Alexandre
 - Add the macro for PM mode

Peter Rosin (1):
  pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

Sylvain Rochet (1):
  pm: at91: pm_slowclock: improve reliability of suspend/resume

Wenyou Yang (10):
  pm: at91: pm_slowclock: remove the unused code related with
    SLOWDOWN_MASTER_CLOCK
  pm: at91: move the copying the sram function to the sram
    initializationi phase
  ARM: at91: move select SRAM to ARCH_AT91
  pm: at91: remove the config item CONFIG_AT91_SLOW_CLOCK
  pm: at91: the standby mode uses the same sram function as the suspend
    to memory mode
  pm: at91: rename file name: pm_slowclock.S -->pm_suspend.S
  pm: at91: rename function name:
    at91_slow_clock()-->at91_pm_suspend_sram_fn
  pm: at91: remove the at91_xxx_standby() function definitions in the
    pm.h
  pm: at91: setup: remove the struct ramc_ids .data at91_xxx_standby
    members
  pm: at91: amend the pm_suspend entry for at91_cpuidle_device
arch/arm/mach-at91/Kconfig         |   17 +-
 arch/arm/mach-at91/Makefile        |    2 +-
 arch/arm/mach-at91/pm.c            |  143 ++++++++--------
 arch/arm/mach-at91/pm.h            |  100 +----------
 arch/arm/mach-at91/pm_slowclock.S  |  323 ------------------------------------
 arch/arm/mach-at91/pm_suspend.S    |  277 +++++++++++++++++++++++++++++++
 arch/arm/mach-at91/setup.c         |   19 +--
 include/soc/at91/at91sam9_ddrsdr.h |    2 +-
 8 files changed, 362 insertions(+), 521 deletions(-)
 delete mode 100644 arch/arm/mach-at91/pm_slowclock.S
 create mode 100644 arch/arm/mach-at91/pm_suspend.S

-- 
1.7.9.5

[PATCH v2 01/12] pm: at91: pm_slowclock: improve reliability of suspend/resume

[Wenyou Yang]

From: Sylvain Rochet <sylvain.rochet@finsecur.com>

Assume USB PLL and PLL B are already stopped before entering sleep mode,
print a warning if this isn't the case.

Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if
something went wrong instead of continuing in unknown condition. There
is not much we can do if a PLL lock never ends, we are running in SRAM
and we will not be able to connect back the sdram or ddram in order to
be able to fire up a message or just panic.

As a bonus, not decounting the timeout register in slow clock mode
reduce cumulated suspend time and resume time from ~17ms to ~15ms.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
---
 arch/arm/mach-at91/pm.c           |   12 +++++++
 arch/arm/mach-at91/pm_slowclock.S |   62 ++-----------------------------------
 2 files changed, 15 insertions(+), 59 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 87c1fd8..5dd4e41 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -98,6 +98,18 @@ static int at91_pm_verify_clocks(void)
 		}
 	}
 
+	/* Drivers should have previously suspended USB PLL */
+	if (at91_pmc_read(AT91_CKGR_UCKR) & AT91_PMC_UPLLEN) {
+		pr_err("AT91: PM - Suspend-to-RAM with USB PLL running\n");
+		return 0;
+	}
+
+	/* Drivers should have previously suspended PLL B */
+	if (at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) {
+		pr_err("AT91: PM - Suspend-to-RAM with PLL B running\n");
+		return 0;
+	}
+
 	return 1;
 }
 
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 556151e..e2bfaf5 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -25,11 +25,6 @@
  */
 #undef SLOWDOWN_MASTER_CLOCK
 
-#define MCKRDY_TIMEOUT		1000
-#define MOSCRDY_TIMEOUT 	1000
-#define PLLALOCK_TIMEOUT	1000
-#define PLLBLOCK_TIMEOUT	1000
-
 pmc	.req	r0
 sdramc	.req	r1
 ramc1	.req	r2
@@ -41,56 +36,27 @@ tmp2	.req	r5
  * Wait until master clock is ready (after switching master clock source)
  */
 	.macro wait_mckrdy
-	mov	tmp2, #MCKRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MCKRDY
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until master oscillator has stabilized.
  */
 	.macro wait_moscrdy
-	mov	tmp2, #MOSCRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MOSCS
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until PLLA has locked.
  */
 	.macro wait_pllalock
-	mov	tmp2, #PLLALOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKA
 	beq	1b
-2:
-	.endm
-
-/*
- * Wait until PLLB has locked.
- */
-	.macro wait_pllblock
-	mov	tmp2, #PLLBLOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKB
-	beq	1b
-2:
 	.endm
 
 	.text
@@ -198,13 +164,6 @@ sdr_sr_done:
 	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
 
-	/* Save PLLB setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLBR]
-	str	tmp1, .saved_pllbr
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
 	/* Turn off the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
@@ -220,18 +179,6 @@ sdr_sr_done:
 
 	wait_moscrdy
 
-	/* Restore PLLB setting */
-	ldr	tmp1, .saved_pllbr
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	1f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	2f
-1:
-	wait_pllblock
-2:
-
 	/* Restore PLLA setting */
 	ldr	tmp1, .saved_pllar
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
@@ -310,9 +257,6 @@ ram_restored:
 .saved_pllar:
 	.word 0
 
-.saved_pllbr:
-	.word 0
-
 .saved_sam9_lpr:
 	.word 0
 
-- 
1.7.9.5

[PATCH v2 01/12] pm: at91: pm_slowclock: improve reliability of suspend/resume

[Wenyou Yang]

From: Sylvain Rochet <sylvain.rochet@finsecur.com>

Assume USB PLL and PLL B are already stopped before entering sleep mode,
print a warning if this isn't the case.

Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if
something went wrong instead of continuing in unknown condition. There
is not much we can do if a PLL lock never ends, we are running in SRAM
and we will not be able to connect back the sdram or ddram in order to
be able to fire up a message or just panic.

As a bonus, not decounting the timeout register in slow clock mode
reduce cumulated suspend time and resume time from ~17ms to ~15ms.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
---
 arch/arm/mach-at91/pm.c           |   12 +++++++
 arch/arm/mach-at91/pm_slowclock.S |   62 ++-----------------------------------
 2 files changed, 15 insertions(+), 59 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 87c1fd8..5dd4e41 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -98,6 +98,18 @@ static int at91_pm_verify_clocks(void)
 		}
 	}
 
+	/* Drivers should have previously suspended USB PLL */
+	if (at91_pmc_read(AT91_CKGR_UCKR) & AT91_PMC_UPLLEN) {
+		pr_err("AT91: PM - Suspend-to-RAM with USB PLL running\n");
+		return 0;
+	}
+
+	/* Drivers should have previously suspended PLL B */
+	if (at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) {
+		pr_err("AT91: PM - Suspend-to-RAM with PLL B running\n");
+		return 0;
+	}
+
 	return 1;
 }
 
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 556151e..e2bfaf5 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -25,11 +25,6 @@
  */
 #undef SLOWDOWN_MASTER_CLOCK
 
-#define MCKRDY_TIMEOUT		1000
-#define MOSCRDY_TIMEOUT 	1000
-#define PLLALOCK_TIMEOUT	1000
-#define PLLBLOCK_TIMEOUT	1000
-
 pmc	.req	r0
 sdramc	.req	r1
 ramc1	.req	r2
@@ -41,56 +36,27 @@ tmp2	.req	r5
  * Wait until master clock is ready (after switching master clock source)
  */
 	.macro wait_mckrdy
-	mov	tmp2, #MCKRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MCKRDY
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until master oscillator has stabilized.
  */
 	.macro wait_moscrdy
-	mov	tmp2, #MOSCRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MOSCS
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until PLLA has locked.
  */
 	.macro wait_pllalock
-	mov	tmp2, #PLLALOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKA
 	beq	1b
-2:
-	.endm
-
-/*
- * Wait until PLLB has locked.
- */
-	.macro wait_pllblock
-	mov	tmp2, #PLLBLOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKB
-	beq	1b
-2:
 	.endm
 
 	.text
@@ -198,13 +164,6 @@ sdr_sr_done:
 	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
 
-	/* Save PLLB setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLBR]
-	str	tmp1, .saved_pllbr
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
 	/* Turn off the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
@@ -220,18 +179,6 @@ sdr_sr_done:
 
 	wait_moscrdy
 
-	/* Restore PLLB setting */
-	ldr	tmp1, .saved_pllbr
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	1f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	2f
-1:
-	wait_pllblock
-2:
-
 	/* Restore PLLA setting */
 	ldr	tmp1, .saved_pllar
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
@@ -310,9 +257,6 @@ ram_restored:
 .saved_pllar:
 	.word 0
 
-.saved_pllbr:
-	.word 0
-
 .saved_sam9_lpr:
 	.word 0
 
-- 
1.7.9.5

[PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Wenyou Yang]

From: Peter Rosin <peda@axentia.se>

The DDRSDR controller fails miserably to put LPDDR1 memories in
self-refresh. Force the controller to think it has DDR2 memories
during the self-refresh period, as the DDR2 self-refresh spec is
equivalent to LPDDR1, and is correctly implemented in the
controller.

Assume that the second controller has the same fault, but that is
untested.

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/pm_slowclock.S  |   43 +++++++++++++++++++++++++++++++-----
 include/soc/at91/at91sam9_ddrsdr.h |    2 +-
 2 files changed, 39 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index e2bfaf5..1155217 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -100,6 +100,16 @@ ddr_sr_enable:
 	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
 	bne	sdr_sr_enable
 
+	/* LPDDR1 --> force DDR2 mode during self-refresh */
+	ldr	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	str	tmp1, .saved_sam9_mdr
+	bic	tmp1, tmp1, #~AT91_DDRSDRC_MD
+	cmp	tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	biceq	tmp1, tmp1, #AT91_DDRSDRC_MD
+	orreq	tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+
 	/* prepare for DDRAM self-refresh mode */
 	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
 	str	tmp1, .saved_sam9_lpr
@@ -108,14 +118,26 @@ ddr_sr_enable:
 
 	/* figure out if we use the second ram controller */
 	cmp	ramc1, #0
-	ldrne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-	strne	tmp2, .saved_sam9_lpr1
-	bicne	tmp2, #AT91_DDRSDRC_LPCB
-	orrne	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	beq	ddr_no_2nd_ctrl
+
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	str	tmp2, .saved_sam9_mdr1
+	bic	tmp2, tmp2, #~AT91_DDRSDRC_MD
+	cmp	tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	biceq	tmp2, tmp2, #AT91_DDRSDRC_MD
+	orreq	tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+	str	tmp2, .saved_sam9_lpr1
+	bic	tmp2, #AT91_DDRSDRC_LPCB
+	orr	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
 
 	/* Enable DDRAM self-refresh mode */
+	str	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+ddr_no_2nd_ctrl:
 	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
 
 	b	sdr_sr_done
 
@@ -227,12 +249,17 @@ sdr_sr_done:
 	 */
 	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
 	bne	sdr_en_restore
+	/* Restore MDR in case of LPDDR1 */
+	ldr	tmp1, .saved_sam9_mdr
+	str	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
 	/* Restore LPR on AT91 with DDRAM */
 	ldr	tmp1, .saved_sam9_lpr
 	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
 
 	/* if we use the second ram controller */
 	cmp	ramc1, #0
+	ldrne	tmp2, .saved_sam9_mdr1
+	strne	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
 	ldrne	tmp2, .saved_sam9_lpr1
 	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
 
@@ -263,5 +290,11 @@ ram_restored:
 .saved_sam9_lpr1:
 	.word 0
 
+.saved_sam9_mdr:
+	.word 0
+
+.saved_sam9_mdr1:
+	.word 0
+
 ENTRY(at91_slow_clock_sz)
 	.word .-at91_slow_clock
diff --git a/include/soc/at91/at91sam9_ddrsdr.h b/include/soc/at91/at91sam9_ddrsdr.h
index 0210797..dc10c52 100644
--- a/include/soc/at91/at91sam9_ddrsdr.h
+++ b/include/soc/at91/at91sam9_ddrsdr.h
@@ -92,7 +92,7 @@
 #define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
 
 #define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
-#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
+#define		AT91_DDRSDRC_MD		(7 << 0)	/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-- 
1.7.9.5

[PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Wenyou Yang]

From: Peter Rosin <peda@axentia.se>

The DDRSDR controller fails miserably to put LPDDR1 memories in
self-refresh. Force the controller to think it has DDR2 memories
during the self-refresh period, as the DDR2 self-refresh spec is
equivalent to LPDDR1, and is correctly implemented in the
controller.

Assume that the second controller has the same fault, but that is
untested.

Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/pm_slowclock.S  |   43 +++++++++++++++++++++++++++++++-----
 include/soc/at91/at91sam9_ddrsdr.h |    2 +-
 2 files changed, 39 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index e2bfaf5..1155217 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -100,6 +100,16 @@ ddr_sr_enable:
 	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
 	bne	sdr_sr_enable
 
+	/* LPDDR1 --> force DDR2 mode during self-refresh */
+	ldr	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	str	tmp1, .saved_sam9_mdr
+	bic	tmp1, tmp1, #~AT91_DDRSDRC_MD
+	cmp	tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	biceq	tmp1, tmp1, #AT91_DDRSDRC_MD
+	orreq	tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+
 	/* prepare for DDRAM self-refresh mode */
 	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
 	str	tmp1, .saved_sam9_lpr
@@ -108,14 +118,26 @@ ddr_sr_enable:
 
 	/* figure out if we use the second ram controller */
 	cmp	ramc1, #0
-	ldrne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-	strne	tmp2, .saved_sam9_lpr1
-	bicne	tmp2, #AT91_DDRSDRC_LPCB
-	orrne	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	beq	ddr_no_2nd_ctrl
+
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	str	tmp2, .saved_sam9_mdr1
+	bic	tmp2, tmp2, #~AT91_DDRSDRC_MD
+	cmp	tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	biceq	tmp2, tmp2, #AT91_DDRSDRC_MD
+	orreq	tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+	str	tmp2, .saved_sam9_lpr1
+	bic	tmp2, #AT91_DDRSDRC_LPCB
+	orr	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
 
 	/* Enable DDRAM self-refresh mode */
+	str	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+ddr_no_2nd_ctrl:
 	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
 
 	b	sdr_sr_done
 
@@ -227,12 +249,17 @@ sdr_sr_done:
 	 */
 	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
 	bne	sdr_en_restore
+	/* Restore MDR in case of LPDDR1 */
+	ldr	tmp1, .saved_sam9_mdr
+	str	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
 	/* Restore LPR on AT91 with DDRAM */
 	ldr	tmp1, .saved_sam9_lpr
 	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
 
 	/* if we use the second ram controller */
 	cmp	ramc1, #0
+	ldrne	tmp2, .saved_sam9_mdr1
+	strne	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
 	ldrne	tmp2, .saved_sam9_lpr1
 	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
 
@@ -263,5 +290,11 @@ ram_restored:
 .saved_sam9_lpr1:
 	.word 0
 
+.saved_sam9_mdr:
+	.word 0
+
+.saved_sam9_mdr1:
+	.word 0
+
 ENTRY(at91_slow_clock_sz)
 	.word .-at91_slow_clock
diff --git a/include/soc/at91/at91sam9_ddrsdr.h b/include/soc/at91/at91sam9_ddrsdr.h
index 0210797..dc10c52 100644
--- a/include/soc/at91/at91sam9_ddrsdr.h
+++ b/include/soc/at91/at91sam9_ddrsdr.h
@@ -92,7 +92,7 @@
 #define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
 
 #define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
-#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
+#define		AT91_DDRSDRC_MD		(7 << 0)	/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-- 
1.7.9.5

[PATCH v2 03/12] pm: at91: pm_slowclock: remove the unused code related with SLOWDOWN_MASTER_CLOCK

[Wenyou Yang]

The SLOWDOWN_MASTER_CLOCK definition is not used, remove the redundant code.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/pm_slowclock.S |   37 -------------------------------------
 1 file changed, 37 deletions(-)

diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 1155217..4e55665 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -11,20 +11,11 @@
  * published by the Free Software Foundation.
  *
  */
-
 #include <linux/linkage.h>
 #include <linux/clk/at91_pmc.h>
 #include <mach/hardware.h>
 #include <mach/at91_ramc.h>
 
-/*
- * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
- * clock during suspend by adjusting its prescalar and divisor.
- * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
- *       are errata regarding adjusting the prescalar and divisor.
- */
-#undef SLOWDOWN_MASTER_CLOCK
-
 pmc	.req	r0
 sdramc	.req	r1
 ramc1	.req	r2
@@ -166,18 +157,6 @@ sdr_sr_done:
 
 	wait_mckrdy
 
-#ifdef SLOWDOWN_MASTER_CLOCK
-	/*
-	 * Set the Master Clock PRES and MDIV fields.
-	 *
-	 * See AT91RM9200 errata #27 and #28 for details.
-	 */
-	mov	tmp1, #0
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-#endif
-
 	/* Save PLLA setting and disable it */
 	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
 	str	tmp1, .saved_pllar
@@ -213,22 +192,6 @@ sdr_sr_done:
 	wait_pllalock
 4:
 
-#ifdef SLOWDOWN_MASTER_CLOCK
-	/*
-	 * First set PRES if it was not 0,
-	 * than set CSS and MDIV fields.
-	 *
-	 * See AT91RM9200 errata #27 and #28 for details.
-	 */
-	ldr	tmp1, .saved_mckr
-	tst	tmp1, #AT91_PMC_PRES
-	beq	2f
-	and	tmp1, tmp1, #AT91_PMC_PRES
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-#endif
-
 	/*
 	 * Restore master clock setting
 	 */
-- 
1.7.9.5

[PATCH v2 03/12] pm: at91: pm_slowclock: remove the unused code related with SLOWDOWN_MASTER_CLOCK

[Wenyou Yang]

The SLOWDOWN_MASTER_CLOCK definition is not used, remove the redundant code.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/pm_slowclock.S |   37 -------------------------------------
 1 file changed, 37 deletions(-)

diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 1155217..4e55665 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -11,20 +11,11 @@
  * published by the Free Software Foundation.
  *
  */
-
 #include <linux/linkage.h>
 #include <linux/clk/at91_pmc.h>
 #include <mach/hardware.h>
 #include <mach/at91_ramc.h>
 
-/*
- * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
- * clock during suspend by adjusting its prescalar and divisor.
- * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
- *       are errata regarding adjusting the prescalar and divisor.
- */
-#undef SLOWDOWN_MASTER_CLOCK
-
 pmc	.req	r0
 sdramc	.req	r1
 ramc1	.req	r2
@@ -166,18 +157,6 @@ sdr_sr_done:
 
 	wait_mckrdy
 
-#ifdef SLOWDOWN_MASTER_CLOCK
-	/*
-	 * Set the Master Clock PRES and MDIV fields.
-	 *
-	 * See AT91RM9200 errata #27 and #28 for details.
-	 */
-	mov	tmp1, #0
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-#endif
-
 	/* Save PLLA setting and disable it */
 	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
 	str	tmp1, .saved_pllar
@@ -213,22 +192,6 @@ sdr_sr_done:
 	wait_pllalock
 4:
 
-#ifdef SLOWDOWN_MASTER_CLOCK
-	/*
-	 * First set PRES if it was not 0,
-	 * than set CSS and MDIV fields.
-	 *
-	 * See AT91RM9200 errata #27 and #28 for details.
-	 */
-	ldr	tmp1, .saved_mckr
-	tst	tmp1, #AT91_PMC_PRES
-	beq	2f
-	and	tmp1, tmp1, #AT91_PMC_PRES
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-#endif
-
 	/*
 	 * Restore master clock setting
 	 */
-- 
1.7.9.5

[PATCH v2 04/12] pm: at91: move the copying the sram function to the sram initializationi phase

[Wenyou Yang]

To decrease the suspend time, move the copying the sram function
to the sram initialization phase, instead of every time go to suspend.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/pm.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 5dd4e41..409185e 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -161,10 +161,6 @@ static int at91_pm_enter(suspend_state_t state)
 			 * turning off the main oscillator; reverse on wakeup.
 			 */
 			if (slow_clock) {
-#ifdef CONFIG_AT91_SLOW_CLOCK
-				/* copy slow_clock handler to SRAM, and call it */
-				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
-#endif
 				slow_clock(at91_pmc_base, at91_ramc_base[0],
 					   at91_ramc_base[1],
 					   at91_pm_data.memctrl);
@@ -272,6 +268,9 @@ static void __init at91_pm_sram_init(void)
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
 	slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
 
+	/* Copy slow_clock handler to SRAM, and call it */
+	memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
+
 put_node:
 	of_node_put(node);
 }
-- 
1.7.9.5

[PATCH v2 04/12] pm: at91: move the copying the sram function to the sram initializationi phase

[Wenyou Yang]

To decrease the suspend time, move the copying the sram function
to the sram initialization phase, instead of every time go to suspend.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/pm.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 5dd4e41..409185e 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -161,10 +161,6 @@ static int at91_pm_enter(suspend_state_t state)
 			 * turning off the main oscillator; reverse on wakeup.
 			 */
 			if (slow_clock) {
-#ifdef CONFIG_AT91_SLOW_CLOCK
-				/* copy slow_clock handler to SRAM, and call it */
-				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
-#endif
 				slow_clock(at91_pmc_base, at91_ramc_base[0],
 					   at91_ramc_base[1],
 					   at91_pm_data.memctrl);
@@ -272,6 +268,9 @@ static void __init at91_pm_sram_init(void)
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
 	slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
 
+	/* Copy slow_clock handler to SRAM, and call it */
+	memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
+
 put_node:
 	of_node_put(node);
 }
-- 
1.7.9.5

[PATCH v2 05/12] ARM: at91: move select SRAM to ARCH_AT91

[Wenyou Yang]

Because the CONFIG_AT91_SLOW_CLOCK will be removed
to simply the PM config, so move select SRAM.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/Kconfig |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index c6956b8..cbaf0c8 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -24,6 +24,7 @@ config SOC_AT91SAM9
 	select GENERIC_CLOCKEVENTS
 	select MEMORY
 	select ATMEL_SDRAMC
+	select SRAM if PM
 
 config SOC_SAMA5
 	bool
@@ -34,6 +35,7 @@ config SOC_SAMA5
 	select MEMORY
 	select ATMEL_SDRAMC
 	select PHYLIB if NETDEVICES
+	select SRAM if PM
 
 menu "Atmel AT91 System-on-Chip"
 
@@ -91,6 +93,7 @@ config SOC_AT91RM9200
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USB_CLK
+	select SRAM if PM
 
 config SOC_AT91SAM9260
 	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
@@ -159,7 +162,6 @@ comment "AT91 Feature Selections"
 
 config AT91_SLOW_CLOCK
 	bool "Suspend-to-RAM disables main oscillator"
-	select SRAM
 	depends on SUSPEND
 	help
 	  Select this if you want Suspend-to-RAM to save the most power
-- 
1.7.9.5

[PATCH v2 05/12] ARM: at91: move select SRAM to ARCH_AT91

[Wenyou Yang]

Because the CONFIG_AT91_SLOW_CLOCK will be removed
to simply the PM config, so move select SRAM.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/Kconfig |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index c6956b8..cbaf0c8 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -24,6 +24,7 @@ config SOC_AT91SAM9
 	select GENERIC_CLOCKEVENTS
 	select MEMORY
 	select ATMEL_SDRAMC
+	select SRAM if PM
 
 config SOC_SAMA5
 	bool
@@ -34,6 +35,7 @@ config SOC_SAMA5
 	select MEMORY
 	select ATMEL_SDRAMC
 	select PHYLIB if NETDEVICES
+	select SRAM if PM
 
 menu "Atmel AT91 System-on-Chip"
 
@@ -91,6 +93,7 @@ config SOC_AT91RM9200
 	select CPU_ARM920T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USB_CLK
+	select SRAM if PM
 
 config SOC_AT91SAM9260
 	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
@@ -159,7 +162,6 @@ comment "AT91 Feature Selections"
 
 config AT91_SLOW_CLOCK
 	bool "Suspend-to-RAM disables main oscillator"
-	select SRAM
 	depends on SUSPEND
 	help
 	  Select this if you want Suspend-to-RAM to save the most power
-- 
1.7.9.5

[PATCH v2 06/12] pm: at91: remove the config item CONFIG_AT91_SLOW_CLOCK

[Wenyou Yang]

The slow clock always exists, for the suspend to memory mode,
the master clock always switch to the slow clock.

To simplify the PM config, remove this config item, remove
the definition code as well.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/Kconfig  |   13 -------------
 arch/arm/mach-at91/Makefile |    2 +-
 arch/arm/mach-at91/pm.c     |    7 -------
 3 files changed, 1 insertion(+), 21 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index cbaf0c8..0af6744 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -160,19 +160,6 @@ endif # SOC_SAM_V4_V5
 
 comment "AT91 Feature Selections"
 
-config AT91_SLOW_CLOCK
-	bool "Suspend-to-RAM disables main oscillator"
-	depends on SUSPEND
-	help
-	  Select this if you want Suspend-to-RAM to save the most power
-	  possible (without powering off the CPU) by disabling the PLLs
-	  and main oscillator so that only the 32 KiHz clock is available.
-
-	  When only that slow-clock is available, some peripherals lose
-	  functionality.  Many can't issue wakeup events unless faster
-	  clocks are available.  Some lose their operating state and
-	  need to be completely re-initialized.
-
 config AT91_TIMER_HZ
        int "Kernel HZ (jiffies per second)"
        range 32 1024
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 8ef7d9a..13dd3e6 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_SOC_SAMA5)		+= board-dt-sama5.o
 
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
+obj-$(CONFIG_PM)		+= pm_slowclock.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 409185e..dc2541b 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -133,11 +133,9 @@ EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
 			  void __iomem *ramc1, int memctrl);
 
-#ifdef CONFIG_AT91_SLOW_CLOCK
 extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
 			    void __iomem *ramc1, int memctrl);
 extern u32 at91_slow_clock_sz;
-#endif
 
 static int at91_pm_enter(suspend_state_t state)
 {
@@ -232,7 +230,6 @@ void at91_pm_set_standby(void (*at91_standby)(void))
 	}
 }
 
-#ifdef CONFIG_AT91_SLOW_CLOCK
 static void __init at91_pm_sram_init(void)
 {
 	struct gen_pool *sram_pool;
@@ -274,14 +271,10 @@ static void __init at91_pm_sram_init(void)
 put_node:
 	of_node_put(node);
 }
-#endif
-
 
 static void __init at91_pm_init(void)
 {
-#ifdef CONFIG_AT91_SLOW_CLOCK
 	at91_pm_sram_init();
-#endif
 
 	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
 
-- 
1.7.9.5

[PATCH v2 06/12] pm: at91: remove the config item CONFIG_AT91_SLOW_CLOCK

[Wenyou Yang]

The slow clock always exists, for the suspend to memory mode,
the master clock always switch to the slow clock.

To simplify the PM config, remove this config item, remove
the definition code as well.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/Kconfig  |   13 -------------
 arch/arm/mach-at91/Makefile |    2 +-
 arch/arm/mach-at91/pm.c     |    7 -------
 3 files changed, 1 insertion(+), 21 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index cbaf0c8..0af6744 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -160,19 +160,6 @@ endif # SOC_SAM_V4_V5
 
 comment "AT91 Feature Selections"
 
-config AT91_SLOW_CLOCK
-	bool "Suspend-to-RAM disables main oscillator"
-	depends on SUSPEND
-	help
-	  Select this if you want Suspend-to-RAM to save the most power
-	  possible (without powering off the CPU) by disabling the PLLs
-	  and main oscillator so that only the 32 KiHz clock is available.
-
-	  When only that slow-clock is available, some peripherals lose
-	  functionality.  Many can't issue wakeup events unless faster
-	  clocks are available.  Some lose their operating state and
-	  need to be completely re-initialized.
-
 config AT91_TIMER_HZ
        int "Kernel HZ (jiffies per second)"
        range 32 1024
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 8ef7d9a..13dd3e6 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_SOC_SAMA5)		+= board-dt-sama5.o
 
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
+obj-$(CONFIG_PM)		+= pm_slowclock.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 409185e..dc2541b 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -133,11 +133,9 @@ EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
 			  void __iomem *ramc1, int memctrl);
 
-#ifdef CONFIG_AT91_SLOW_CLOCK
 extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
 			    void __iomem *ramc1, int memctrl);
 extern u32 at91_slow_clock_sz;
-#endif
 
 static int at91_pm_enter(suspend_state_t state)
 {
@@ -232,7 +230,6 @@ void at91_pm_set_standby(void (*at91_standby)(void))
 	}
 }
 
-#ifdef CONFIG_AT91_SLOW_CLOCK
 static void __init at91_pm_sram_init(void)
 {
 	struct gen_pool *sram_pool;
@@ -274,14 +271,10 @@ static void __init at91_pm_sram_init(void)
 put_node:
 	of_node_put(node);
 }
-#endif
-
 
 static void __init at91_pm_init(void)
 {
-#ifdef CONFIG_AT91_SLOW_CLOCK
 	at91_pm_sram_init();
-#endif
 
 	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
 
-- 
1.7.9.5

[PATCH v2 07/12] pm: at91: the standby mode uses the same sram function as the suspend to memory mode

[Wenyou Yang]

To simply the PM code, the suspend to standby mode uses the same sram function
as the suspend to memory mode, running in the internal SRAM,
instead of the respective code for each mode.

But for the suspend to standby mode, the master clock doesn't
switch to the slow clock,  and the main oscillator doesn't
turn off as well.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---
 arch/arm/mach-at91/pm.c           |   87 +++++++++++++++++--------------------
 arch/arm/mach-at91/pm.h           |    7 +++
 arch/arm/mach-at91/pm_slowclock.S |   18 ++++++++
 3 files changed, 65 insertions(+), 47 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index dc2541b..509ac9d 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -71,11 +71,15 @@ static int at91_pm_begin(suspend_state_t state)
  * Verify that all the clocks are correct before entering
  * slow-clock mode.
  */
-static int at91_pm_verify_clocks(void)
+static int at91_pm_verify_clocks(suspend_state_t state)
 {
 	unsigned long scsr;
 	int i;
 
+	/* For PM_SUSPEND_STANDBY, skip verifying the clock */
+	if (state == PM_SUSPEND_STANDBY)
+		return 1;
+
 	scsr = at91_pmc_read(AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
@@ -137,62 +141,51 @@ extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
 			    void __iomem *ramc1, int memctrl);
 extern u32 at91_slow_clock_sz;
 
+static void at91_pm_suspend(suspend_state_t state)
+{
+	unsigned int pm_data = at91_pm_data.memctrl;
+
+	pm_data |= (state == PM_SUSPEND_MEM) ?
+				AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
+
+	slow_clock(at91_pmc_base, at91_ramc_base[0],
+			at91_ramc_base[1], pm_data);
+}
+
 static int at91_pm_enter(suspend_state_t state)
 {
 	at91_pinctrl_gpio_suspend();
 
 	switch (state) {
+	/*
+	 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
+	 * drivers must suspend more deeply, the master clock switches
+	 * to the clk32k and turns off the main oscillator
+	 *
+	 * STANDBY mode has *all* drivers suspended; ignores irqs not
+	 * marked as 'wakeup' event sources; and reduces DRAM power.
+	 * But otherwise it's identical to PM_SUSPEND_ON:  cpu idle, and
+	 * nothing fancy done with main or cpu clocks.
+	 */
+	case PM_SUSPEND_MEM:
+	case PM_SUSPEND_STANDBY:
 		/*
-		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
-		 * drivers must suspend more deeply:  only the master clock
-		 * controller may be using the main oscillator.
+		 * Ensure that clocks are in a valid state.
 		 */
-		case PM_SUSPEND_MEM:
-			/*
-			 * Ensure that clocks are in a valid state.
-			 */
-			if (!at91_pm_verify_clocks())
-				goto error;
-
-			/*
-			 * Enter slow clock mode by switching over to clk32k and
-			 * turning off the main oscillator; reverse on wakeup.
-			 */
-			if (slow_clock) {
-				slow_clock(at91_pmc_base, at91_ramc_base[0],
-					   at91_ramc_base[1],
-					   at91_pm_data.memctrl);
-				break;
-			} else {
-				pr_info("AT91: PM - no slow clock mode enabled ...\n");
-				/* FALLTHROUGH leaving master clock alone */
-			}
+		if (!at91_pm_verify_clocks(state))
+			goto error;
 
-		/*
-		 * STANDBY mode has *all* drivers suspended; ignores irqs not
-		 * marked as 'wakeup' event sources; and reduces DRAM power.
-		 * But otherwise it's identical to PM_SUSPEND_ON:  cpu idle, and
-		 * nothing fancy done with main or cpu clocks.
-		 */
-		case PM_SUSPEND_STANDBY:
-			/*
-			 * NOTE: the Wait-for-Interrupt instruction needs to be
-			 * in icache so no SDRAM accesses are needed until the
-			 * wakeup IRQ occurs and self-refresh is terminated.
-			 * For ARM 926 based chips, this requirement is weaker
-			 * as at91sam9 can access a RAM in self-refresh mode.
-			 */
-			if (at91_pm_standby)
-				at91_pm_standby();
-			break;
+		at91_pm_suspend(state);
 
-		case PM_SUSPEND_ON:
-			cpu_do_idle();
-			break;
+		break;
 
-		default:
-			pr_debug("AT91: PM - bogus suspend state %d\n", state);
-			goto error;
+	case PM_SUSPEND_ON:
+		cpu_do_idle();
+		break;
+
+	default:
+		pr_debug("AT91: PM - bogus suspend state %d\n", state);
+		goto error;
 	}
 
 error:
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index d2c8996..5bc9c33 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -15,6 +15,13 @@
 
 #include <mach/at91_ramc.h>
 
+#define	AT91_PM_MEMCTRL_MASK	0x0f
+#define	AT91_PM_MODE_OFFSET	4
+#define	AT91_PM_MODE_MASK	0x0f
+#define	AT91_PM_MODE(x)		(((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
+
+#define	AT91_PM_SLOW_CLOCK	0x01
+
 #ifdef CONFIG_PM
 extern void at91_pm_set_standby(void (*at91_standby)(void));
 #else
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 4e55665..f56d114 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -16,12 +16,15 @@
 #include <mach/hardware.h>
 #include <mach/at91_ramc.h>
 
+#include "pm.h"
+
 pmc	.req	r0
 sdramc	.req	r1
 ramc1	.req	r2
 memctrl	.req	r3
 tmp1	.req	r4
 tmp2	.req	r5
+mode	.req	r6
 
 /*
  * Wait until master clock is ready (after switching master clock source)
@@ -73,6 +76,13 @@ ENTRY(at91_slow_clock)
 	mov	tmp1, #0
 	mcr	p15, 0, tmp1, c7, c10, 4
 
+	mov	tmp1, memctrl
+	mov	tmp2, tmp1, lsr#AT91_PM_MODE_OFFSET
+	and	mode, tmp2, #AT91_PM_MODE_MASK
+
+	mov	tmp1, memctrl
+	and	memctrl, tmp1, #AT91_PM_MEMCTRL_MASK
+
 	cmp	memctrl, #AT91_MEMCTRL_MC
 	bne	ddr_sr_enable
 
@@ -145,6 +155,9 @@ sdr_sr_enable:
 	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
 
 sdr_sr_done:
+	tst	mode, #AT91_PM_SLOW_CLOCK
+	beq	skip_disable_main_clock
+
 	/* Save Master clock setting */
 	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
 	str	tmp1, .saved_mckr
@@ -170,9 +183,13 @@ sdr_sr_done:
 	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
+skip_disable_main_clock:
 	/* Wait for interrupt */
 	mcr	p15, 0, tmp1, c7, c0, 4
 
+	tst	mode, #AT91_PM_SLOW_CLOCK
+	beq	skip_enable_main_clock
+
 	/* Turn on the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
@@ -200,6 +217,7 @@ sdr_sr_done:
 
 	wait_mckrdy
 
+skip_enable_main_clock:
 	/*
 	 * at91rm9200 Memory controller
 	 * Do nothing - self-refresh is automatically disabled.
-- 
1.7.9.5

[PATCH v2 07/12] pm: at91: the standby mode uses the same sram function as the suspend to memory mode

[Wenyou Yang]

To simply the PM code, the suspend to standby mode uses the same sram function
as the suspend to memory mode, running in the internal SRAM,
instead of the respective code for each mode.

But for the suspend to standby mode, the master clock doesn't
switch to the slow clock,  and the main oscillator doesn't
turn off as well.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---
 arch/arm/mach-at91/pm.c           |   87 +++++++++++++++++--------------------
 arch/arm/mach-at91/pm.h           |    7 +++
 arch/arm/mach-at91/pm_slowclock.S |   18 ++++++++
 3 files changed, 65 insertions(+), 47 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index dc2541b..509ac9d 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -71,11 +71,15 @@ static int at91_pm_begin(suspend_state_t state)
  * Verify that all the clocks are correct before entering
  * slow-clock mode.
  */
-static int at91_pm_verify_clocks(void)
+static int at91_pm_verify_clocks(suspend_state_t state)
 {
 	unsigned long scsr;
 	int i;
 
+	/* For PM_SUSPEND_STANDBY, skip verifying the clock */
+	if (state == PM_SUSPEND_STANDBY)
+		return 1;
+
 	scsr = at91_pmc_read(AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
@@ -137,62 +141,51 @@ extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
 			    void __iomem *ramc1, int memctrl);
 extern u32 at91_slow_clock_sz;
 
+static void at91_pm_suspend(suspend_state_t state)
+{
+	unsigned int pm_data = at91_pm_data.memctrl;
+
+	pm_data |= (state == PM_SUSPEND_MEM) ?
+				AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
+
+	slow_clock(at91_pmc_base, at91_ramc_base[0],
+			at91_ramc_base[1], pm_data);
+}
+
 static int at91_pm_enter(suspend_state_t state)
 {
 	at91_pinctrl_gpio_suspend();
 
 	switch (state) {
+	/*
+	 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
+	 * drivers must suspend more deeply, the master clock switches
+	 * to the clk32k and turns off the main oscillator
+	 *
+	 * STANDBY mode has *all* drivers suspended; ignores irqs not
+	 * marked as 'wakeup' event sources; and reduces DRAM power.
+	 * But otherwise it's identical to PM_SUSPEND_ON:  cpu idle, and
+	 * nothing fancy done with main or cpu clocks.
+	 */
+	case PM_SUSPEND_MEM:
+	case PM_SUSPEND_STANDBY:
 		/*
-		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
-		 * drivers must suspend more deeply:  only the master clock
-		 * controller may be using the main oscillator.
+		 * Ensure that clocks are in a valid state.
 		 */
-		case PM_SUSPEND_MEM:
-			/*
-			 * Ensure that clocks are in a valid state.
-			 */
-			if (!at91_pm_verify_clocks())
-				goto error;
-
-			/*
-			 * Enter slow clock mode by switching over to clk32k and
-			 * turning off the main oscillator; reverse on wakeup.
-			 */
-			if (slow_clock) {
-				slow_clock(at91_pmc_base, at91_ramc_base[0],
-					   at91_ramc_base[1],
-					   at91_pm_data.memctrl);
-				break;
-			} else {
-				pr_info("AT91: PM - no slow clock mode enabled ...\n");
-				/* FALLTHROUGH leaving master clock alone */
-			}
+		if (!at91_pm_verify_clocks(state))
+			goto error;
 
-		/*
-		 * STANDBY mode has *all* drivers suspended; ignores irqs not
-		 * marked as 'wakeup' event sources; and reduces DRAM power.
-		 * But otherwise it's identical to PM_SUSPEND_ON:  cpu idle, and
-		 * nothing fancy done with main or cpu clocks.
-		 */
-		case PM_SUSPEND_STANDBY:
-			/*
-			 * NOTE: the Wait-for-Interrupt instruction needs to be
-			 * in icache so no SDRAM accesses are needed until the
-			 * wakeup IRQ occurs and self-refresh is terminated.
-			 * For ARM 926 based chips, this requirement is weaker
-			 * as at91sam9 can access a RAM in self-refresh mode.
-			 */
-			if (at91_pm_standby)
-				at91_pm_standby();
-			break;
+		at91_pm_suspend(state);
 
-		case PM_SUSPEND_ON:
-			cpu_do_idle();
-			break;
+		break;
 
-		default:
-			pr_debug("AT91: PM - bogus suspend state %d\n", state);
-			goto error;
+	case PM_SUSPEND_ON:
+		cpu_do_idle();
+		break;
+
+	default:
+		pr_debug("AT91: PM - bogus suspend state %d\n", state);
+		goto error;
 	}
 
 error:
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index d2c8996..5bc9c33 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -15,6 +15,13 @@
 
 #include <mach/at91_ramc.h>
 
+#define	AT91_PM_MEMCTRL_MASK	0x0f
+#define	AT91_PM_MODE_OFFSET	4
+#define	AT91_PM_MODE_MASK	0x0f
+#define	AT91_PM_MODE(x)		(((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
+
+#define	AT91_PM_SLOW_CLOCK	0x01
+
 #ifdef CONFIG_PM
 extern void at91_pm_set_standby(void (*at91_standby)(void));
 #else
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 4e55665..f56d114 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -16,12 +16,15 @@
 #include <mach/hardware.h>
 #include <mach/at91_ramc.h>
 
+#include "pm.h"
+
 pmc	.req	r0
 sdramc	.req	r1
 ramc1	.req	r2
 memctrl	.req	r3
 tmp1	.req	r4
 tmp2	.req	r5
+mode	.req	r6
 
 /*
  * Wait until master clock is ready (after switching master clock source)
@@ -73,6 +76,13 @@ ENTRY(at91_slow_clock)
 	mov	tmp1, #0
 	mcr	p15, 0, tmp1, c7, c10, 4
 
+	mov	tmp1, memctrl
+	mov	tmp2, tmp1, lsr#AT91_PM_MODE_OFFSET
+	and	mode, tmp2, #AT91_PM_MODE_MASK
+
+	mov	tmp1, memctrl
+	and	memctrl, tmp1, #AT91_PM_MEMCTRL_MASK
+
 	cmp	memctrl, #AT91_MEMCTRL_MC
 	bne	ddr_sr_enable
 
@@ -145,6 +155,9 @@ sdr_sr_enable:
 	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
 
 sdr_sr_done:
+	tst	mode, #AT91_PM_SLOW_CLOCK
+	beq	skip_disable_main_clock
+
 	/* Save Master clock setting */
 	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
 	str	tmp1, .saved_mckr
@@ -170,9 +183,13 @@ sdr_sr_done:
 	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
+skip_disable_main_clock:
 	/* Wait for interrupt */
 	mcr	p15, 0, tmp1, c7, c0, 4
 
+	tst	mode, #AT91_PM_SLOW_CLOCK
+	beq	skip_enable_main_clock
+
 	/* Turn on the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
@@ -200,6 +217,7 @@ sdr_sr_done:
 
 	wait_mckrdy
 
+skip_enable_main_clock:
 	/*
 	 * at91rm9200 Memory controller
 	 * Do nothing - self-refresh is automatically disabled.
-- 
1.7.9.5

[PATCH v2 08/12] pm: at91: rename file name: pm_slowclock.S -->pm_suspend.S

[Wenyou Yang]

Because the sram function is used for the suspend to standby mode as well,
more than suspend to memory, so renaming is more elegant.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/Makefile       |    2 +-
 arch/arm/mach-at91/pm_slowclock.S |  281 -------------------------------------
 arch/arm/mach-at91/pm_suspend.S   |  281 +++++++++++++++++++++++++++++++++++++
 3 files changed, 282 insertions(+), 282 deletions(-)
 delete mode 100644 arch/arm/mach-at91/pm_slowclock.S
 create mode 100644 arch/arm/mach-at91/pm_suspend.S

diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 13dd3e6..aba208f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_SOC_SAMA5)		+= board-dt-sama5.o
 
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= pm_slowclock.o
+obj-$(CONFIG_PM)		+= pm_suspend.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
deleted file mode 100644
index f56d114..0000000
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * arch/arm/mach-at91/pm_slow_clock.S
- *
- *  Copyright (C) 2006 Savin Zlobec
- *
- * AT91SAM9 support:
- *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/linkage.h>
-#include <linux/clk/at91_pmc.h>
-#include <mach/hardware.h>
-#include <mach/at91_ramc.h>
-
-#include "pm.h"
-
-pmc	.req	r0
-sdramc	.req	r1
-ramc1	.req	r2
-memctrl	.req	r3
-tmp1	.req	r4
-tmp2	.req	r5
-mode	.req	r6
-
-/*
- * Wait until master clock is ready (after switching master clock source)
- */
-	.macro wait_mckrdy
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_MCKRDY
-	beq	1b
-	.endm
-
-/*
- * Wait until master oscillator has stabilized.
- */
-	.macro wait_moscrdy
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_MOSCS
-	beq	1b
-	.endm
-
-/*
- * Wait until PLLA has locked.
- */
-	.macro wait_pllalock
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKA
-	beq	1b
-	.endm
-
-	.text
-
-/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
- *			void __iomem *ramc1, int memctrl)
- */
-ENTRY(at91_slow_clock)
-	/* Save registers on stack */
-	stmfd	sp!, {r4 - r12, lr}
-
-	/*
-	 * Register usage:
-	 *  R0 = Base address of AT91_PMC
-	 *  R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
-	 *  R2 = Base address of second RAM Controller or 0 if not present
-	 *  R3 = Memory controller
-	 *  R4 = temporary register
-	 *  R5 = temporary register
-	 */
-
-	/* Drain write buffer */
-	mov	tmp1, #0
-	mcr	p15, 0, tmp1, c7, c10, 4
-
-	mov	tmp1, memctrl
-	mov	tmp2, tmp1, lsr#AT91_PM_MODE_OFFSET
-	and	mode, tmp2, #AT91_PM_MODE_MASK
-
-	mov	tmp1, memctrl
-	and	memctrl, tmp1, #AT91_PM_MEMCTRL_MASK
-
-	cmp	memctrl, #AT91_MEMCTRL_MC
-	bne	ddr_sr_enable
-
-	/*
-	 * at91rm9200 Memory controller
-	 */
-	/* Put SDRAM in self-refresh mode */
-	mov	tmp1, #1
-	str	tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
-	b	sdr_sr_done
-
-	/*
-	 * DDRSDR Memory controller
-	 */
-ddr_sr_enable:
-	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
-	bne	sdr_sr_enable
-
-	/* LPDDR1 --> force DDR2 mode during self-refresh */
-	ldr	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
-	str	tmp1, .saved_sam9_mdr
-	bic	tmp1, tmp1, #~AT91_DDRSDRC_MD
-	cmp	tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
-	ldreq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
-	biceq	tmp1, tmp1, #AT91_DDRSDRC_MD
-	orreq	tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
-	streq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
-
-	/* prepare for DDRAM self-refresh mode */
-	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-	str	tmp1, .saved_sam9_lpr
-	bic	tmp1, #AT91_DDRSDRC_LPCB
-	orr	tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-
-	/* figure out if we use the second ram controller */
-	cmp	ramc1, #0
-	beq	ddr_no_2nd_ctrl
-
-	ldr	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
-	str	tmp2, .saved_sam9_mdr1
-	bic	tmp2, tmp2, #~AT91_DDRSDRC_MD
-	cmp	tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
-	ldreq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
-	biceq	tmp2, tmp2, #AT91_DDRSDRC_MD
-	orreq	tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
-	streq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
-
-	ldr	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-	str	tmp2, .saved_sam9_lpr1
-	bic	tmp2, #AT91_DDRSDRC_LPCB
-	orr	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-
-	/* Enable DDRAM self-refresh mode */
-	str	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-ddr_no_2nd_ctrl:
-	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-
-	b	sdr_sr_done
-
-	/*
-	 * SDRAMC Memory controller
-	 */
-sdr_sr_enable:
-	/* Enable SDRAM self-refresh mode */
-	ldr	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-	str	tmp1, .saved_sam9_lpr
-
-	bic	tmp1, #AT91_SDRAMC_LPCB
-	orr	tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
-	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-
-sdr_sr_done:
-	tst	mode, #AT91_PM_SLOW_CLOCK
-	beq	skip_disable_main_clock
-
-	/* Save Master clock setting */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
-	str	tmp1, .saved_mckr
-
-	/*
-	 * Set the Master clock source to slow clock
-	 */
-	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-
-	/* Save PLLA setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
-	str	tmp1, .saved_pllar
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
-
-	/* Turn off the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
-
-skip_disable_main_clock:
-	/* Wait for interrupt */
-	mcr	p15, 0, tmp1, c7, c0, 4
-
-	tst	mode, #AT91_PM_SLOW_CLOCK
-	beq	skip_enable_main_clock
-
-	/* Turn on the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
-
-	wait_moscrdy
-
-	/* Restore PLLA setting */
-	ldr	tmp1, .saved_pllar
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	3f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	4f
-3:
-	wait_pllalock
-4:
-
-	/*
-	 * Restore master clock setting
-	 */
-2:	ldr	tmp1, .saved_mckr
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-
-skip_enable_main_clock:
-	/*
-	 * at91rm9200 Memory controller
-	 * Do nothing - self-refresh is automatically disabled.
-	 */
-	cmp	memctrl, #AT91_MEMCTRL_MC
-	beq	ram_restored
-
-	/*
-	 * DDRSDR Memory controller
-	 */
-	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
-	bne	sdr_en_restore
-	/* Restore MDR in case of LPDDR1 */
-	ldr	tmp1, .saved_sam9_mdr
-	str	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
-	/* Restore LPR on AT91 with DDRAM */
-	ldr	tmp1, .saved_sam9_lpr
-	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-
-	/* if we use the second ram controller */
-	cmp	ramc1, #0
-	ldrne	tmp2, .saved_sam9_mdr1
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
-	ldrne	tmp2, .saved_sam9_lpr1
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-
-	b	ram_restored
-
-	/*
-	 * SDRAMC Memory controller
-	 */
-sdr_en_restore:
-	/* Restore LPR on AT91 with SDRAM */
-	ldr	tmp1, .saved_sam9_lpr
-	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-
-ram_restored:
-	/* Restore registers, and return */
-	ldmfd	sp!, {r4 - r12, pc}
-
-
-.saved_mckr:
-	.word 0
-
-.saved_pllar:
-	.word 0
-
-.saved_sam9_lpr:
-	.word 0
-
-.saved_sam9_lpr1:
-	.word 0
-
-.saved_sam9_mdr:
-	.word 0
-
-.saved_sam9_mdr1:
-	.word 0
-
-ENTRY(at91_slow_clock_sz)
-	.word .-at91_slow_clock
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
new file mode 100644
index 0000000..8edbad0
--- /dev/null
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -0,0 +1,281 @@
+/*
+ * arch/arm/mach-at91/pm_suspend.S
+ *
+ *  Copyright (C) 2006 Savin Zlobec
+ *
+ * AT91SAM9 support:
+ *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/clk/at91_pmc.h>
+#include <mach/hardware.h>
+#include <mach/at91_ramc.h>
+
+#include "pm.h"
+
+pmc	.req	r0
+sdramc	.req	r1
+ramc1	.req	r2
+memctrl	.req	r3
+tmp1	.req	r4
+tmp2	.req	r5
+mode	.req	r6
+
+/*
+ * Wait until master clock is ready (after switching master clock source)
+ */
+	.macro wait_mckrdy
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MCKRDY
+	beq	1b
+	.endm
+
+/*
+ * Wait until master oscillator has stabilized.
+ */
+	.macro wait_moscrdy
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCS
+	beq	1b
+	.endm
+
+/*
+ * Wait until PLLA has locked.
+ */
+	.macro wait_pllalock
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_LOCKA
+	beq	1b
+	.endm
+
+	.text
+
+/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
+ *			void __iomem *ramc1, int memctrl)
+ */
+ENTRY(at91_slow_clock)
+	/* Save registers on stack */
+	stmfd	sp!, {r4 - r12, lr}
+
+	/*
+	 * Register usage:
+	 *  R0 = Base address of AT91_PMC
+	 *  R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
+	 *  R2 = Base address of second RAM Controller or 0 if not present
+	 *  R3 = Memory controller
+	 *  R4 = temporary register
+	 *  R5 = temporary register
+	 */
+
+	/* Drain write buffer */
+	mov	tmp1, #0
+	mcr	p15, 0, tmp1, c7, c10, 4
+
+	mov	tmp1, memctrl
+	mov	tmp2, tmp1, lsr#AT91_PM_MODE_OFFSET
+	and	mode, tmp2, #AT91_PM_MODE_MASK
+
+	mov	tmp1, memctrl
+	and	memctrl, tmp1, #AT91_PM_MEMCTRL_MASK
+
+	cmp	memctrl, #AT91_MEMCTRL_MC
+	bne	ddr_sr_enable
+
+	/*
+	 * at91rm9200 Memory controller
+	 */
+	/* Put SDRAM in self-refresh mode */
+	mov	tmp1, #1
+	str	tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
+	b	sdr_sr_done
+
+	/*
+	 * DDRSDR Memory controller
+	 */
+ddr_sr_enable:
+	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
+	bne	sdr_sr_enable
+
+	/* LPDDR1 --> force DDR2 mode during self-refresh */
+	ldr	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	str	tmp1, .saved_sam9_mdr
+	bic	tmp1, tmp1, #~AT91_DDRSDRC_MD
+	cmp	tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	biceq	tmp1, tmp1, #AT91_DDRSDRC_MD
+	orreq	tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+
+	/* prepare for DDRAM self-refresh mode */
+	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+	str	tmp1, .saved_sam9_lpr
+	bic	tmp1, #AT91_DDRSDRC_LPCB
+	orr	tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* figure out if we use the second ram controller */
+	cmp	ramc1, #0
+	beq	ddr_no_2nd_ctrl
+
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	str	tmp2, .saved_sam9_mdr1
+	bic	tmp2, tmp2, #~AT91_DDRSDRC_MD
+	cmp	tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	biceq	tmp2, tmp2, #AT91_DDRSDRC_MD
+	orreq	tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+	str	tmp2, .saved_sam9_lpr1
+	bic	tmp2, #AT91_DDRSDRC_LPCB
+	orr	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* Enable DDRAM self-refresh mode */
+	str	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+ddr_no_2nd_ctrl:
+	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+
+	b	sdr_sr_done
+
+	/*
+	 * SDRAMC Memory controller
+	 */
+sdr_sr_enable:
+	/* Enable SDRAM self-refresh mode */
+	ldr	tmp1, [sdramc, #AT91_SDRAMC_LPR]
+	str	tmp1, .saved_sam9_lpr
+
+	bic	tmp1, #AT91_SDRAMC_LPCB
+	orr	tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
+
+sdr_sr_done:
+	tst	mode, #AT91_PM_SLOW_CLOCK
+	beq	skip_disable_main_clock
+
+	/* Save Master clock setting */
+	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, .saved_mckr
+
+	/*
+	 * Set the Master clock source to slow clock
+	 */
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
+	/* Save PLLA setting and disable it */
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
+	str	tmp1, .saved_pllar
+
+	mov	tmp1, #AT91_PMC_PLLCOUNT
+	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+
+	/* Turn off the main oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+skip_disable_main_clock:
+	/* Wait for interrupt */
+	mcr	p15, 0, tmp1, c7, c0, 4
+
+	tst	mode, #AT91_PM_SLOW_CLOCK
+	beq	skip_enable_main_clock
+
+	/* Turn on the main oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscrdy
+
+	/* Restore PLLA setting */
+	ldr	tmp1, .saved_pllar
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+
+	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
+	bne	3f
+	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
+	beq	4f
+3:
+	wait_pllalock
+4:
+
+	/*
+	 * Restore master clock setting
+	 */
+2:	ldr	tmp1, .saved_mckr
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
+skip_enable_main_clock:
+	/*
+	 * at91rm9200 Memory controller
+	 * Do nothing - self-refresh is automatically disabled.
+	 */
+	cmp	memctrl, #AT91_MEMCTRL_MC
+	beq	ram_restored
+
+	/*
+	 * DDRSDR Memory controller
+	 */
+	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
+	bne	sdr_en_restore
+	/* Restore MDR in case of LPDDR1 */
+	ldr	tmp1, .saved_sam9_mdr
+	str	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	/* Restore LPR on AT91 with DDRAM */
+	ldr	tmp1, .saved_sam9_lpr
+	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+
+	/* if we use the second ram controller */
+	cmp	ramc1, #0
+	ldrne	tmp2, .saved_sam9_mdr1
+	strne	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	ldrne	tmp2, .saved_sam9_lpr1
+	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+
+	b	ram_restored
+
+	/*
+	 * SDRAMC Memory controller
+	 */
+sdr_en_restore:
+	/* Restore LPR on AT91 with SDRAM */
+	ldr	tmp1, .saved_sam9_lpr
+	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
+
+ram_restored:
+	/* Restore registers, and return */
+	ldmfd	sp!, {r4 - r12, pc}
+
+
+.saved_mckr:
+	.word 0
+
+.saved_pllar:
+	.word 0
+
+.saved_sam9_lpr:
+	.word 0
+
+.saved_sam9_lpr1:
+	.word 0
+
+.saved_sam9_mdr:
+	.word 0
+
+.saved_sam9_mdr1:
+	.word 0
+
+ENTRY(at91_slow_clock_sz)
+	.word .-at91_slow_clock
-- 
1.7.9.5

[PATCH v2 08/12] pm: at91: rename file name: pm_slowclock.S -->pm_suspend.S

[Wenyou Yang]

Because the sram function is used for the suspend to standby mode as well,
more than suspend to memory, so renaming is more elegant.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/Makefile       |    2 +-
 arch/arm/mach-at91/pm_slowclock.S |  281 -------------------------------------
 arch/arm/mach-at91/pm_suspend.S   |  281 +++++++++++++++++++++++++++++++++++++
 3 files changed, 282 insertions(+), 282 deletions(-)
 delete mode 100644 arch/arm/mach-at91/pm_slowclock.S
 create mode 100644 arch/arm/mach-at91/pm_suspend.S

diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 13dd3e6..aba208f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_SOC_SAMA5)		+= board-dt-sama5.o
 
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= pm_slowclock.o
+obj-$(CONFIG_PM)		+= pm_suspend.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
deleted file mode 100644
index f56d114..0000000
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * arch/arm/mach-at91/pm_slow_clock.S
- *
- *  Copyright (C) 2006 Savin Zlobec
- *
- * AT91SAM9 support:
- *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/linkage.h>
-#include <linux/clk/at91_pmc.h>
-#include <mach/hardware.h>
-#include <mach/at91_ramc.h>
-
-#include "pm.h"
-
-pmc	.req	r0
-sdramc	.req	r1
-ramc1	.req	r2
-memctrl	.req	r3
-tmp1	.req	r4
-tmp2	.req	r5
-mode	.req	r6
-
-/*
- * Wait until master clock is ready (after switching master clock source)
- */
-	.macro wait_mckrdy
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_MCKRDY
-	beq	1b
-	.endm
-
-/*
- * Wait until master oscillator has stabilized.
- */
-	.macro wait_moscrdy
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_MOSCS
-	beq	1b
-	.endm
-
-/*
- * Wait until PLLA has locked.
- */
-	.macro wait_pllalock
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKA
-	beq	1b
-	.endm
-
-	.text
-
-/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
- *			void __iomem *ramc1, int memctrl)
- */
-ENTRY(at91_slow_clock)
-	/* Save registers on stack */
-	stmfd	sp!, {r4 - r12, lr}
-
-	/*
-	 * Register usage:
-	 *  R0 = Base address of AT91_PMC
-	 *  R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
-	 *  R2 = Base address of second RAM Controller or 0 if not present
-	 *  R3 = Memory controller
-	 *  R4 = temporary register
-	 *  R5 = temporary register
-	 */
-
-	/* Drain write buffer */
-	mov	tmp1, #0
-	mcr	p15, 0, tmp1, c7, c10, 4
-
-	mov	tmp1, memctrl
-	mov	tmp2, tmp1, lsr#AT91_PM_MODE_OFFSET
-	and	mode, tmp2, #AT91_PM_MODE_MASK
-
-	mov	tmp1, memctrl
-	and	memctrl, tmp1, #AT91_PM_MEMCTRL_MASK
-
-	cmp	memctrl, #AT91_MEMCTRL_MC
-	bne	ddr_sr_enable
-
-	/*
-	 * at91rm9200 Memory controller
-	 */
-	/* Put SDRAM in self-refresh mode */
-	mov	tmp1, #1
-	str	tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
-	b	sdr_sr_done
-
-	/*
-	 * DDRSDR Memory controller
-	 */
-ddr_sr_enable:
-	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
-	bne	sdr_sr_enable
-
-	/* LPDDR1 --> force DDR2 mode during self-refresh */
-	ldr	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
-	str	tmp1, .saved_sam9_mdr
-	bic	tmp1, tmp1, #~AT91_DDRSDRC_MD
-	cmp	tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
-	ldreq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
-	biceq	tmp1, tmp1, #AT91_DDRSDRC_MD
-	orreq	tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
-	streq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
-
-	/* prepare for DDRAM self-refresh mode */
-	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-	str	tmp1, .saved_sam9_lpr
-	bic	tmp1, #AT91_DDRSDRC_LPCB
-	orr	tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-
-	/* figure out if we use the second ram controller */
-	cmp	ramc1, #0
-	beq	ddr_no_2nd_ctrl
-
-	ldr	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
-	str	tmp2, .saved_sam9_mdr1
-	bic	tmp2, tmp2, #~AT91_DDRSDRC_MD
-	cmp	tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
-	ldreq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
-	biceq	tmp2, tmp2, #AT91_DDRSDRC_MD
-	orreq	tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
-	streq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
-
-	ldr	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-	str	tmp2, .saved_sam9_lpr1
-	bic	tmp2, #AT91_DDRSDRC_LPCB
-	orr	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-
-	/* Enable DDRAM self-refresh mode */
-	str	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-ddr_no_2nd_ctrl:
-	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-
-	b	sdr_sr_done
-
-	/*
-	 * SDRAMC Memory controller
-	 */
-sdr_sr_enable:
-	/* Enable SDRAM self-refresh mode */
-	ldr	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-	str	tmp1, .saved_sam9_lpr
-
-	bic	tmp1, #AT91_SDRAMC_LPCB
-	orr	tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
-	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-
-sdr_sr_done:
-	tst	mode, #AT91_PM_SLOW_CLOCK
-	beq	skip_disable_main_clock
-
-	/* Save Master clock setting */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
-	str	tmp1, .saved_mckr
-
-	/*
-	 * Set the Master clock source to slow clock
-	 */
-	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-
-	/* Save PLLA setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
-	str	tmp1, .saved_pllar
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
-
-	/* Turn off the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
-
-skip_disable_main_clock:
-	/* Wait for interrupt */
-	mcr	p15, 0, tmp1, c7, c0, 4
-
-	tst	mode, #AT91_PM_SLOW_CLOCK
-	beq	skip_enable_main_clock
-
-	/* Turn on the main oscillator */
-	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
-	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
-	str	tmp1, [pmc, #AT91_CKGR_MOR]
-
-	wait_moscrdy
-
-	/* Restore PLLA setting */
-	ldr	tmp1, .saved_pllar
-	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	3f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	4f
-3:
-	wait_pllalock
-4:
-
-	/*
-	 * Restore master clock setting
-	 */
-2:	ldr	tmp1, .saved_mckr
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
-
-	wait_mckrdy
-
-skip_enable_main_clock:
-	/*
-	 * at91rm9200 Memory controller
-	 * Do nothing - self-refresh is automatically disabled.
-	 */
-	cmp	memctrl, #AT91_MEMCTRL_MC
-	beq	ram_restored
-
-	/*
-	 * DDRSDR Memory controller
-	 */
-	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
-	bne	sdr_en_restore
-	/* Restore MDR in case of LPDDR1 */
-	ldr	tmp1, .saved_sam9_mdr
-	str	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
-	/* Restore LPR on AT91 with DDRAM */
-	ldr	tmp1, .saved_sam9_lpr
-	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
-
-	/* if we use the second ram controller */
-	cmp	ramc1, #0
-	ldrne	tmp2, .saved_sam9_mdr1
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
-	ldrne	tmp2, .saved_sam9_lpr1
-	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
-
-	b	ram_restored
-
-	/*
-	 * SDRAMC Memory controller
-	 */
-sdr_en_restore:
-	/* Restore LPR on AT91 with SDRAM */
-	ldr	tmp1, .saved_sam9_lpr
-	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
-
-ram_restored:
-	/* Restore registers, and return */
-	ldmfd	sp!, {r4 - r12, pc}
-
-
-.saved_mckr:
-	.word 0
-
-.saved_pllar:
-	.word 0
-
-.saved_sam9_lpr:
-	.word 0
-
-.saved_sam9_lpr1:
-	.word 0
-
-.saved_sam9_mdr:
-	.word 0
-
-.saved_sam9_mdr1:
-	.word 0
-
-ENTRY(at91_slow_clock_sz)
-	.word .-at91_slow_clock
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
new file mode 100644
index 0000000..8edbad0
--- /dev/null
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -0,0 +1,281 @@
+/*
+ * arch/arm/mach-at91/pm_suspend.S
+ *
+ *  Copyright (C) 2006 Savin Zlobec
+ *
+ * AT91SAM9 support:
+ *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/clk/at91_pmc.h>
+#include <mach/hardware.h>
+#include <mach/at91_ramc.h>
+
+#include "pm.h"
+
+pmc	.req	r0
+sdramc	.req	r1
+ramc1	.req	r2
+memctrl	.req	r3
+tmp1	.req	r4
+tmp2	.req	r5
+mode	.req	r6
+
+/*
+ * Wait until master clock is ready (after switching master clock source)
+ */
+	.macro wait_mckrdy
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MCKRDY
+	beq	1b
+	.endm
+
+/*
+ * Wait until master oscillator has stabilized.
+ */
+	.macro wait_moscrdy
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCS
+	beq	1b
+	.endm
+
+/*
+ * Wait until PLLA has locked.
+ */
+	.macro wait_pllalock
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_LOCKA
+	beq	1b
+	.endm
+
+	.text
+
+/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
+ *			void __iomem *ramc1, int memctrl)
+ */
+ENTRY(at91_slow_clock)
+	/* Save registers on stack */
+	stmfd	sp!, {r4 - r12, lr}
+
+	/*
+	 * Register usage:
+	 *  R0 = Base address of AT91_PMC
+	 *  R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
+	 *  R2 = Base address of second RAM Controller or 0 if not present
+	 *  R3 = Memory controller
+	 *  R4 = temporary register
+	 *  R5 = temporary register
+	 */
+
+	/* Drain write buffer */
+	mov	tmp1, #0
+	mcr	p15, 0, tmp1, c7, c10, 4
+
+	mov	tmp1, memctrl
+	mov	tmp2, tmp1, lsr#AT91_PM_MODE_OFFSET
+	and	mode, tmp2, #AT91_PM_MODE_MASK
+
+	mov	tmp1, memctrl
+	and	memctrl, tmp1, #AT91_PM_MEMCTRL_MASK
+
+	cmp	memctrl, #AT91_MEMCTRL_MC
+	bne	ddr_sr_enable
+
+	/*
+	 * at91rm9200 Memory controller
+	 */
+	/* Put SDRAM in self-refresh mode */
+	mov	tmp1, #1
+	str	tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
+	b	sdr_sr_done
+
+	/*
+	 * DDRSDR Memory controller
+	 */
+ddr_sr_enable:
+	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
+	bne	sdr_sr_enable
+
+	/* LPDDR1 --> force DDR2 mode during self-refresh */
+	ldr	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	str	tmp1, .saved_sam9_mdr
+	bic	tmp1, tmp1, #~AT91_DDRSDRC_MD
+	cmp	tmp1, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	biceq	tmp1, tmp1, #AT91_DDRSDRC_MD
+	orreq	tmp1, tmp1, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+
+	/* prepare for DDRAM self-refresh mode */
+	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+	str	tmp1, .saved_sam9_lpr
+	bic	tmp1, #AT91_DDRSDRC_LPCB
+	orr	tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* figure out if we use the second ram controller */
+	cmp	ramc1, #0
+	beq	ddr_no_2nd_ctrl
+
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	str	tmp2, .saved_sam9_mdr1
+	bic	tmp2, tmp2, #~AT91_DDRSDRC_MD
+	cmp	tmp2, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	biceq	tmp2, tmp2, #AT91_DDRSDRC_MD
+	orreq	tmp2, tmp2, #AT91_DDRSDRC_MD_DDR2
+	streq	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+
+	ldr	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+	str	tmp2, .saved_sam9_lpr1
+	bic	tmp2, #AT91_DDRSDRC_LPCB
+	orr	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* Enable DDRAM self-refresh mode */
+	str	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+ddr_no_2nd_ctrl:
+	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+
+	b	sdr_sr_done
+
+	/*
+	 * SDRAMC Memory controller
+	 */
+sdr_sr_enable:
+	/* Enable SDRAM self-refresh mode */
+	ldr	tmp1, [sdramc, #AT91_SDRAMC_LPR]
+	str	tmp1, .saved_sam9_lpr
+
+	bic	tmp1, #AT91_SDRAMC_LPCB
+	orr	tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
+
+sdr_sr_done:
+	tst	mode, #AT91_PM_SLOW_CLOCK
+	beq	skip_disable_main_clock
+
+	/* Save Master clock setting */
+	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, .saved_mckr
+
+	/*
+	 * Set the Master clock source to slow clock
+	 */
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
+	/* Save PLLA setting and disable it */
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
+	str	tmp1, .saved_pllar
+
+	mov	tmp1, #AT91_PMC_PLLCOUNT
+	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+
+	/* Turn off the main oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+skip_disable_main_clock:
+	/* Wait for interrupt */
+	mcr	p15, 0, tmp1, c7, c0, 4
+
+	tst	mode, #AT91_PM_SLOW_CLOCK
+	beq	skip_enable_main_clock
+
+	/* Turn on the main oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscrdy
+
+	/* Restore PLLA setting */
+	ldr	tmp1, .saved_pllar
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+
+	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
+	bne	3f
+	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
+	beq	4f
+3:
+	wait_pllalock
+4:
+
+	/*
+	 * Restore master clock setting
+	 */
+2:	ldr	tmp1, .saved_mckr
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
+
+	wait_mckrdy
+
+skip_enable_main_clock:
+	/*
+	 * at91rm9200 Memory controller
+	 * Do nothing - self-refresh is automatically disabled.
+	 */
+	cmp	memctrl, #AT91_MEMCTRL_MC
+	beq	ram_restored
+
+	/*
+	 * DDRSDR Memory controller
+	 */
+	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
+	bne	sdr_en_restore
+	/* Restore MDR in case of LPDDR1 */
+	ldr	tmp1, .saved_sam9_mdr
+	str	tmp1, [sdramc, #AT91_DDRSDRC_MDR]
+	/* Restore LPR on AT91 with DDRAM */
+	ldr	tmp1, .saved_sam9_lpr
+	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+
+	/* if we use the second ram controller */
+	cmp	ramc1, #0
+	ldrne	tmp2, .saved_sam9_mdr1
+	strne	tmp2, [ramc1, #AT91_DDRSDRC_MDR]
+	ldrne	tmp2, .saved_sam9_lpr1
+	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+
+	b	ram_restored
+
+	/*
+	 * SDRAMC Memory controller
+	 */
+sdr_en_restore:
+	/* Restore LPR on AT91 with SDRAM */
+	ldr	tmp1, .saved_sam9_lpr
+	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
+
+ram_restored:
+	/* Restore registers, and return */
+	ldmfd	sp!, {r4 - r12, pc}
+
+
+.saved_mckr:
+	.word 0
+
+.saved_pllar:
+	.word 0
+
+.saved_sam9_lpr:
+	.word 0
+
+.saved_sam9_lpr1:
+	.word 0
+
+.saved_sam9_mdr:
+	.word 0
+
+.saved_sam9_mdr1:
+	.word 0
+
+ENTRY(at91_slow_clock_sz)
+	.word .-at91_slow_clock
-- 
1.7.9.5

[PATCH v2 09/12] pm: at91: rename function name: at91_slow_clock()-->at91_pm_suspend_sram_fn

[Wenyou Yang]

As the file name's renaming, rename the file name at91_slow_clock()-->
at91_pm_suspend_sram_fn, rename the function handler's name at the same time.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/pm.c         |   23 +++++++++++------------
 arch/arm/mach-at91/pm_suspend.S |   24 ++++++++++--------------
 2 files changed, 21 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 509ac9d..68cd3ce 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -133,13 +133,12 @@ int at91_suspend_entering_slow_clock(void)
 }
 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 
-
-static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
+static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
 			  void __iomem *ramc1, int memctrl);
 
-extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
+extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
 			    void __iomem *ramc1, int memctrl);
-extern u32 at91_slow_clock_sz;
+extern u32 at91_pm_suspend_in_sram_sz;
 
 static void at91_pm_suspend(suspend_state_t state)
 {
@@ -148,8 +147,8 @@ static void at91_pm_suspend(suspend_state_t state)
 	pm_data |= (state == PM_SUSPEND_MEM) ?
 				AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
 
-	slow_clock(at91_pmc_base, at91_ramc_base[0],
-			at91_ramc_base[1], pm_data);
+	at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0],
+				at91_ramc_base[1], pm_data);
 }
 
 static int at91_pm_enter(suspend_state_t state)
@@ -249,17 +248,19 @@ static void __init at91_pm_sram_init(void)
 		goto put_node;
 	}
 
-	sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
+	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
 	if (!sram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		goto put_node;
 	}
 
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
-	slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
+	at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
+					at91_pm_suspend_in_sram_sz, false);
 
-	/* Copy slow_clock handler to SRAM, and call it */
-	memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
+	/* Copy pm suspend handler to SRAM, and call it */
+	memcpy(at91_suspend_sram_fn,
+		at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
 
 put_node:
 	of_node_put(node);
@@ -269,8 +270,6 @@ static void __init at91_pm_init(void)
 {
 	at91_pm_sram_init();
 
-	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
-
 	if (at91_cpuidle_device.dev.platform_data)
 		platform_device_register(&at91_cpuidle_device);
 
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index 8edbad0..122a3f1 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -55,23 +55,19 @@ mode	.req	r6
 
 	.text
 
-/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
+/*
+ * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
  *			void __iomem *ramc1, int memctrl)
+ * @input param:
+ * 	@r0: the base address of AT91_PMC
+ *  	@r1: the base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
+ *	@r2: the base address of second SDRAM Controller or 0 if not present
+ *	@r3: the pm information
  */
-ENTRY(at91_slow_clock)
+ENTRY(at91_pm_suspend_in_sram)
 	/* Save registers on stack */
 	stmfd	sp!, {r4 - r12, lr}
 
-	/*
-	 * Register usage:
-	 *  R0 = Base address of AT91_PMC
-	 *  R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
-	 *  R2 = Base address of second RAM Controller or 0 if not present
-	 *  R3 = Memory controller
-	 *  R4 = temporary register
-	 *  R5 = temporary register
-	 */
-
 	/* Drain write buffer */
 	mov	tmp1, #0
 	mcr	p15, 0, tmp1, c7, c10, 4
@@ -277,5 +273,5 @@ ram_restored:
 .saved_sam9_mdr1:
 	.word 0
 
-ENTRY(at91_slow_clock_sz)
-	.word .-at91_slow_clock
+ENTRY(at91_pm_suspend_in_sram_sz)
+	.word .-at91_pm_suspend_in_sram
-- 
1.7.9.5

[PATCH v2 09/12] pm: at91: rename function name: at91_slow_clock()-->at91_pm_suspend_sram_fn

[Wenyou Yang]

As the file name's renaming, rename the file name at91_slow_clock()-->
at91_pm_suspend_sram_fn, rename the function handler's name at the same time.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/pm.c         |   23 +++++++++++------------
 arch/arm/mach-at91/pm_suspend.S |   24 ++++++++++--------------
 2 files changed, 21 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 509ac9d..68cd3ce 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -133,13 +133,12 @@ int at91_suspend_entering_slow_clock(void)
 }
 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 
-
-static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
+static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
 			  void __iomem *ramc1, int memctrl);
 
-extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
+extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
 			    void __iomem *ramc1, int memctrl);
-extern u32 at91_slow_clock_sz;
+extern u32 at91_pm_suspend_in_sram_sz;
 
 static void at91_pm_suspend(suspend_state_t state)
 {
@@ -148,8 +147,8 @@ static void at91_pm_suspend(suspend_state_t state)
 	pm_data |= (state == PM_SUSPEND_MEM) ?
 				AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
 
-	slow_clock(at91_pmc_base, at91_ramc_base[0],
-			at91_ramc_base[1], pm_data);
+	at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0],
+				at91_ramc_base[1], pm_data);
 }
 
 static int at91_pm_enter(suspend_state_t state)
@@ -249,17 +248,19 @@ static void __init at91_pm_sram_init(void)
 		goto put_node;
 	}
 
-	sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
+	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
 	if (!sram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		goto put_node;
 	}
 
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
-	slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
+	at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
+					at91_pm_suspend_in_sram_sz, false);
 
-	/* Copy slow_clock handler to SRAM, and call it */
-	memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
+	/* Copy pm suspend handler to SRAM, and call it */
+	memcpy(at91_suspend_sram_fn,
+		at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
 
 put_node:
 	of_node_put(node);
@@ -269,8 +270,6 @@ static void __init at91_pm_init(void)
 {
 	at91_pm_sram_init();
 
-	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
-
 	if (at91_cpuidle_device.dev.platform_data)
 		platform_device_register(&at91_cpuidle_device);
 
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index 8edbad0..122a3f1 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -55,23 +55,19 @@ mode	.req	r6
 
 	.text
 
-/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
+/*
+ * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
  *			void __iomem *ramc1, int memctrl)
+ * @input param:
+ * 	@r0: the base address of AT91_PMC
+ *  	@r1: the base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
+ *	@r2: the base address of second SDRAM Controller or 0 if not present
+ *	@r3: the pm information
  */
-ENTRY(at91_slow_clock)
+ENTRY(at91_pm_suspend_in_sram)
 	/* Save registers on stack */
 	stmfd	sp!, {r4 - r12, lr}
 
-	/*
-	 * Register usage:
-	 *  R0 = Base address of AT91_PMC
-	 *  R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
-	 *  R2 = Base address of second RAM Controller or 0 if not present
-	 *  R3 = Memory controller
-	 *  R4 = temporary register
-	 *  R5 = temporary register
-	 */
-
 	/* Drain write buffer */
 	mov	tmp1, #0
 	mcr	p15, 0, tmp1, c7, c10, 4
@@ -277,5 +273,5 @@ ram_restored:
 .saved_sam9_mdr1:
 	.word 0
 
-ENTRY(at91_slow_clock_sz)
-	.word .-at91_slow_clock
+ENTRY(at91_pm_suspend_in_sram_sz)
+	.word .-at91_pm_suspend_in_sram
-- 
1.7.9.5

[PATCH v2 10/12] pm: at91: remove the at91_xxx_standby() function definitions in the pm.h

[Wenyou Yang]

Because the the suspend to standby mode uses the sram function,
these functions will not used, remove the redundant code.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/pm.h |   97 -----------------------------------------------
 1 file changed, 97 deletions(-)

diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 5bc9c33..158575e 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,7 +12,6 @@
 #define __ARCH_ARM_MACH_AT91_PM
 
 #include <asm/proc-fns.h>
-
 #include <mach/at91_ramc.h>
 
 #define	AT91_PM_MEMCTRL_MASK	0x0f
@@ -22,100 +21,4 @@
 
 #define	AT91_PM_SLOW_CLOCK	0x01
 
-#ifdef CONFIG_PM
-extern void at91_pm_set_standby(void (*at91_standby)(void));
-#else
-static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
-#endif
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- *
- * Self-refresh mode is exited as soon as a memory access is made, but we don't
- * know for sure when that happens. However, we need to restore the low-power
- * mode if it was enabled before going idle. Restoring low-power mode while
- * still in self-refresh is "not recommended", but seems to work.
- */
-
-static inline void at91rm9200_standby(void)
-{
-	u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
-
-	asm volatile(
-		"b    1f\n\t"
-		".align    5\n\t"
-		"1:  mcr    p15, 0, %0, c7, c10, 4\n\t"
-		"    str    %0, [%1, %2]\n\t"
-		"    str    %3, [%1, %4]\n\t"
-		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
-		"    str    %5, [%1, %2]"
-		:
-		: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
-		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
-		  "r" (lpr));
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91_ddr_standby(void)
-{
-	/* Those two values allow us to delay self-refresh activation
-	 * to the maximum. */
-	u32 lpr0, lpr1 = 0;
-	u32 saved_lpr0, saved_lpr1 = 0;
-
-	if (at91_ramc_base[1]) {
-		saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
-		lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
-		lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-	}
-
-	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
-	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
-	lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-
-	/* self-refresh mode now */
-	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
-	if (at91_ramc_base[1])
-		at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
-
-	cpu_do_idle();
-
-	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
-	if (at91_ramc_base[1])
-		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91sam9_sdram_standby(void)
-{
-	u32 lpr0, lpr1 = 0;
-	u32 saved_lpr0, saved_lpr1 = 0;
-
-	if (at91_ramc_base[1]) {
-		saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
-		lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
-		lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
-	}
-
-	saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
-	lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
-	lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
-
-	/* self-refresh mode now */
-	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
-	if (at91_ramc_base[1])
-		at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
-
-	cpu_do_idle();
-
-	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
-	if (at91_ramc_base[1])
-		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
 #endif
-- 
1.7.9.5

[PATCH v2 10/12] pm: at91: remove the at91_xxx_standby() function definitions in the pm.h

[Wenyou Yang]

Because the the suspend to standby mode uses the sram function,
these functions will not used, remove the redundant code.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/pm.h |   97 -----------------------------------------------
 1 file changed, 97 deletions(-)

diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 5bc9c33..158575e 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -12,7 +12,6 @@
 #define __ARCH_ARM_MACH_AT91_PM
 
 #include <asm/proc-fns.h>
-
 #include <mach/at91_ramc.h>
 
 #define	AT91_PM_MEMCTRL_MASK	0x0f
@@ -22,100 +21,4 @@
 
 #define	AT91_PM_SLOW_CLOCK	0x01
 
-#ifdef CONFIG_PM
-extern void at91_pm_set_standby(void (*at91_standby)(void));
-#else
-static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
-#endif
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- *
- * Self-refresh mode is exited as soon as a memory access is made, but we don't
- * know for sure when that happens. However, we need to restore the low-power
- * mode if it was enabled before going idle. Restoring low-power mode while
- * still in self-refresh is "not recommended", but seems to work.
- */
-
-static inline void at91rm9200_standby(void)
-{
-	u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
-
-	asm volatile(
-		"b    1f\n\t"
-		".align    5\n\t"
-		"1:  mcr    p15, 0, %0, c7, c10, 4\n\t"
-		"    str    %0, [%1, %2]\n\t"
-		"    str    %3, [%1, %4]\n\t"
-		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
-		"    str    %5, [%1, %2]"
-		:
-		: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
-		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
-		  "r" (lpr));
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91_ddr_standby(void)
-{
-	/* Those two values allow us to delay self-refresh activation
-	 * to the maximum. */
-	u32 lpr0, lpr1 = 0;
-	u32 saved_lpr0, saved_lpr1 = 0;
-
-	if (at91_ramc_base[1]) {
-		saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
-		lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
-		lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-	}
-
-	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
-	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
-	lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
-
-	/* self-refresh mode now */
-	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
-	if (at91_ramc_base[1])
-		at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
-
-	cpu_do_idle();
-
-	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
-	if (at91_ramc_base[1])
-		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
-}
-
-/* We manage both DDRAM/SDRAM controllers, we need more than one value to
- * remember.
- */
-static inline void at91sam9_sdram_standby(void)
-{
-	u32 lpr0, lpr1 = 0;
-	u32 saved_lpr0, saved_lpr1 = 0;
-
-	if (at91_ramc_base[1]) {
-		saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
-		lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
-		lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
-	}
-
-	saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
-	lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
-	lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
-
-	/* self-refresh mode now */
-	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
-	if (at91_ramc_base[1])
-		at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
-
-	cpu_do_idle();
-
-	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
-	if (at91_ramc_base[1])
-		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
 #endif
-- 
1.7.9.5

[PATCH v2 11/12] pm: at91: setup: remove the struct ramc_ids .data at91_xxx_standby members

[Wenyou Yang]

Because the at91_xxx_standby function is removed,
remove the struct ramc_ids .data members code.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/setup.c |   19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 4c18428..b8dba9f 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -362,10 +362,10 @@ void __init at91_ioremap_matrix(u32 base_addr)
 }
 
 static struct of_device_id ramc_ids[] = {
-	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
-	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
-	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
-	{ .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby },
+	{ .compatible = "atmel,at91rm9200-sdramc" },
+	{ .compatible = "atmel,at91sam9260-sdramc" },
+	{ .compatible = "atmel,at91sam9g45-ddramc" },
+	{ .compatible = "atmel,sama5d3-ddramc" },
 	{ /*sentinel*/ }
 };
 
@@ -374,28 +374,17 @@ static void at91_dt_ramc(void)
 	struct device_node *np;
 	const struct of_device_id *of_id;
 	int idx = 0;
-	const void *standby = NULL;
 
 	for_each_matching_node_and_match(np, ramc_ids, &of_id) {
 		at91_ramc_base[idx] = of_iomap(np, 0);
 		if (!at91_ramc_base[idx])
 			panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
 
-		if (!standby)
-			standby = of_id->data;
-
 		idx++;
 	}
 
 	if (!idx)
 		panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
-
-	if (!standby) {
-		pr_warn("ramc no standby function available\n");
-		return;
-	}
-
-	at91_pm_set_standby(standby);
 }
 
 void __init at91_dt_initialize(void)
-- 
1.7.9.5

[PATCH v2 11/12] pm: at91: setup: remove the struct ramc_ids .data at91_xxx_standby members

[Wenyou Yang]

Because the at91_xxx_standby function is removed,
remove the struct ramc_ids .data members code.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/setup.c |   19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 4c18428..b8dba9f 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -362,10 +362,10 @@ void __init at91_ioremap_matrix(u32 base_addr)
 }
 
 static struct of_device_id ramc_ids[] = {
-	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
-	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
-	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
-	{ .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby },
+	{ .compatible = "atmel,at91rm9200-sdramc" },
+	{ .compatible = "atmel,at91sam9260-sdramc" },
+	{ .compatible = "atmel,at91sam9g45-ddramc" },
+	{ .compatible = "atmel,sama5d3-ddramc" },
 	{ /*sentinel*/ }
 };
 
@@ -374,28 +374,17 @@ static void at91_dt_ramc(void)
 	struct device_node *np;
 	const struct of_device_id *of_id;
 	int idx = 0;
-	const void *standby = NULL;
 
 	for_each_matching_node_and_match(np, ramc_ids, &of_id) {
 		at91_ramc_base[idx] = of_iomap(np, 0);
 		if (!at91_ramc_base[idx])
 			panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
 
-		if (!standby)
-			standby = of_id->data;
-
 		idx++;
 	}
 
 	if (!idx)
 		panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
-
-	if (!standby) {
-		pr_warn("ramc no standby function available\n");
-		return;
-	}
-
-	at91_pm_set_standby(standby);
 }
 
 void __init at91_dt_initialize(void)
-- 
1.7.9.5

[PATCH v2 12/12] pm: at91: amend the pm_suspend entry for at91_cpuidle_device

[Wenyou Yang]

Because the at91_xxx_standby() function is substitued by the at91_pm_suspend(),
the pm_suspend entry for at91_cpuidle_device changes as well.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/pm.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 68cd3ce..7473978 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -40,8 +40,6 @@ static struct {
 	int memctrl;
 } at91_pm_data;
 
-static void (*at91_pm_standby)(void);
-
 static int at91_pm_valid_state(suspend_state_t state)
 {
 	switch (state) {
@@ -214,12 +212,15 @@ static struct platform_device at91_cpuidle_device = {
 	.name = "cpuidle-at91",
 };
 
-void at91_pm_set_standby(void (*at91_standby)(void))
+static void at91_cpuidle_suspend(void)
 {
-	if (at91_standby) {
-		at91_cpuidle_device.dev.platform_data = at91_standby;
-		at91_pm_standby = at91_standby;
-	}
+	at91_pm_suspend(PM_SUSPEND_STANDBY);
+}
+
+static void at91_cpuidle_set_suspend(void (*at91_suspend)(void))
+{
+	if (at91_suspend)
+		at91_cpuidle_device.dev.platform_data = at91_suspend;
 }
 
 static void __init at91_pm_sram_init(void)
@@ -270,6 +271,8 @@ static void __init at91_pm_init(void)
 {
 	at91_pm_sram_init();
 
+	at91_cpuidle_set_suspend(at91_cpuidle_suspend);
+
 	if (at91_cpuidle_device.dev.platform_data)
 		platform_device_register(&at91_cpuidle_device);
 
-- 
1.7.9.5

[PATCH v2 12/12] pm: at91: amend the pm_suspend entry for at91_cpuidle_device

[Wenyou Yang]

Because the at91_xxx_standby() function is substitued by the at91_pm_suspend(),
the pm_suspend entry for at91_cpuidle_device changes as well.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/mach-at91/pm.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 68cd3ce..7473978 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -40,8 +40,6 @@ static struct {
 	int memctrl;
 } at91_pm_data;
 
-static void (*at91_pm_standby)(void);
-
 static int at91_pm_valid_state(suspend_state_t state)
 {
 	switch (state) {
@@ -214,12 +212,15 @@ static struct platform_device at91_cpuidle_device = {
 	.name = "cpuidle-at91",
 };
 
-void at91_pm_set_standby(void (*at91_standby)(void))
+static void at91_cpuidle_suspend(void)
 {
-	if (at91_standby) {
-		at91_cpuidle_device.dev.platform_data = at91_standby;
-		at91_pm_standby = at91_standby;
-	}
+	at91_pm_suspend(PM_SUSPEND_STANDBY);
+}
+
+static void at91_cpuidle_set_suspend(void (*at91_suspend)(void))
+{
+	if (at91_suspend)
+		at91_cpuidle_device.dev.platform_data = at91_suspend;
 }
 
 static void __init at91_pm_sram_init(void)
@@ -270,6 +271,8 @@ static void __init at91_pm_init(void)
 {
 	at91_pm_sram_init();
 
+	at91_cpuidle_set_suspend(at91_cpuidle_suspend);
+
 	if (at91_cpuidle_device.dev.platform_data)
 		platform_device_register(&at91_cpuidle_device);
 
-- 
1.7.9.5

Re: [PATCH v2 00/12] AT91 pm cleanup for 3.20

[Sylvain Rochet]

Hello Wenyou,

On Mon, Jan 26, 2015 at 05:36:45PM +0800, Wenyou Yang wrote:
> Hi Nicolas,
> 
> This version is rebased on the branch: at91-3.20-cleanup of the repository
> 	git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
> 
> It is purpose to clean up the PM code, includes the patches from Peter Rosin and Sylvain Rochet.
> 
> Since verifying the USB clock and USB PLL disabling before suspending to memory,
> it aslo depends on the following patch serials from Sylvain:
> 	[PATCHv6 0/5] USB: gadget: atmel_usba_udc: Driver improvements
> 	[PATCHv7 0/6] USB: host: Atmel OHCI and EHCI drivers improvements
> 
> Removes CONFIG_AT91_SLOW_CLOCK config item to simply the PM config,
> The suspend to standby mode uses the same sram function as the suspend to memory mode.
> Remove some unused code.
> 
> Alexandr & Sylvain, Thank you very much for so many feedbacks.
> 
> Changes in v2:
>  - Rebase on the at91-3.20-cleanup branch
>  - Recover the verify clock condition, only for suspend to memory.
>  - Collect ACK from Alexandre
>  - Add the macro for PM mode

Did you fix the slow_clock == NULL condition with the change suggested 
by Alexandre ?

Sylvain

[PATCH v2 00/12] AT91 pm cleanup for 3.20

[Sylvain Rochet]

Hello Wenyou,

On Mon, Jan 26, 2015 at 05:36:45PM +0800, Wenyou Yang wrote:
> Hi Nicolas,
> 
> This version is rebased on the branch: at91-3.20-cleanup of the repository
> 	git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
> 
> It is purpose to clean up the PM code, includes the patches from Peter Rosin and Sylvain Rochet.
> 
> Since verifying the USB clock and USB PLL disabling before suspending to memory,
> it aslo depends on the following patch serials from Sylvain:
> 	[PATCHv6 0/5] USB: gadget: atmel_usba_udc: Driver improvements
> 	[PATCHv7 0/6] USB: host: Atmel OHCI and EHCI drivers improvements
> 
> Removes CONFIG_AT91_SLOW_CLOCK config item to simply the PM config,
> The suspend to standby mode uses the same sram function as the suspend to memory mode.
> Remove some unused code.
> 
> Alexandr & Sylvain, Thank you very much for so many feedbacks.
> 
> Changes in v2:
>  - Rebase on the at91-3.20-cleanup branch
>  - Recover the verify clock condition, only for suspend to memory.
>  - Collect ACK from Alexandre
>  - Add the macro for PM mode

Did you fix the slow_clock == NULL condition with the change suggested 
by Alexandre ?

Sylvain

Re: [PATCH v2 07/12] pm: at91: the standby mode uses the same sram function as the suspend to memory mode

[Sylvain Rochet]

Hello Wenyou,


On Mon, Jan 26, 2015 at 05:42:11PM +0800, Wenyou Yang wrote:
> +static int at91_pm_verify_clocks(suspend_state_t state)
>  {
>  	unsigned long scsr;
>  	int i;
>  
> +	/* For PM_SUSPEND_STANDBY, skip verifying the clock */
> +	if (state == PM_SUSPEND_STANDBY)
> +		return 1;
> +

In my opinion we should use the select() already in place in 
at91_pm_enter() to do that:

>  static int at91_pm_enter(suspend_state_t state)
>  {
>  	at91_pinctrl_gpio_suspend();
>  
>  	switch (state) {
     (...)
> +	case PM_SUSPEND_MEM:

	/*
	 * Ensure that clocks are in a valid state.
	 */
	if (!at91_pm_verify_clocks())
		goto error;
	/* FALLTHROUGH */

> +	case PM_SUSPEND_STANDBY:
>  		/*
> -		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so


Sylvain

[PATCH v2 07/12] pm: at91: the standby mode uses the same sram function as the suspend to memory mode

[Sylvain Rochet]

Hello Wenyou,


On Mon, Jan 26, 2015 at 05:42:11PM +0800, Wenyou Yang wrote:
> +static int at91_pm_verify_clocks(suspend_state_t state)
>  {
>  	unsigned long scsr;
>  	int i;
>  
> +	/* For PM_SUSPEND_STANDBY, skip verifying the clock */
> +	if (state == PM_SUSPEND_STANDBY)
> +		return 1;
> +

In my opinion we should use the select() already in place in 
at91_pm_enter() to do that:

>  static int at91_pm_enter(suspend_state_t state)
>  {
>  	at91_pinctrl_gpio_suspend();
>  
>  	switch (state) {
     (...)
> +	case PM_SUSPEND_MEM:

	/*
	 * Ensure that clocks are in a valid state.
	 */
	if (!at91_pm_verify_clocks())
		goto error;
	/* FALLTHROUGH */

> +	case PM_SUSPEND_STANDBY:
>  		/*
> -		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so


Sylvain

Re: [PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Sylvain Rochet]

Hello Wenyou,

On Mon, Jan 26, 2015 at 05:38:59PM +0800, Wenyou Yang wrote:
> From: Peter Rosin <peda@axentia.se>
> 
> The DDRSDR controller fails miserably to put LPDDR1 memories in
> self-refresh. Force the controller to think it has DDR2 memories
> during the self-refresh period, as the DDR2 self-refresh spec is
> equivalent to LPDDR1, and is correctly implemented in the
> controller.
> 
> Assume that the second controller has the same fault, but that is
> untested.
> 
> Signed-off-by: Peter Rosin <peda@axentia.se>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
>  arch/arm/mach-at91/pm_slowclock.S  |   43 +++++++++++++++++++++++++++++++-----
>  include/soc/at91/at91sam9_ddrsdr.h |    2 +-
>  2 files changed, 39 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
> index e2bfaf5..1155217 100644
> --- a/arch/arm/mach-at91/pm_slowclock.S
> +++ b/arch/arm/mach-at91/pm_slowclock.S
> @@ -100,6 +100,16 @@ ddr_sr_enable:
>  	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
>  	bne	sdr_sr_enable
>  
> +	/* LPDDR1 --> force DDR2 mode during self-refresh */

I think we should explain we are dealing with an errata here, this is 
not obvious at first sight, the patch summary may find its place here :-)

Sylvain

[PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Sylvain Rochet]

Hello Wenyou,

On Mon, Jan 26, 2015 at 05:38:59PM +0800, Wenyou Yang wrote:
> From: Peter Rosin <peda@axentia.se>
> 
> The DDRSDR controller fails miserably to put LPDDR1 memories in
> self-refresh. Force the controller to think it has DDR2 memories
> during the self-refresh period, as the DDR2 self-refresh spec is
> equivalent to LPDDR1, and is correctly implemented in the
> controller.
> 
> Assume that the second controller has the same fault, but that is
> untested.
> 
> Signed-off-by: Peter Rosin <peda@axentia.se>
> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
>  arch/arm/mach-at91/pm_slowclock.S  |   43 +++++++++++++++++++++++++++++++-----
>  include/soc/at91/at91sam9_ddrsdr.h |    2 +-
>  2 files changed, 39 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
> index e2bfaf5..1155217 100644
> --- a/arch/arm/mach-at91/pm_slowclock.S
> +++ b/arch/arm/mach-at91/pm_slowclock.S
> @@ -100,6 +100,16 @@ ddr_sr_enable:
>  	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
>  	bne	sdr_sr_enable
>  
> +	/* LPDDR1 --> force DDR2 mode during self-refresh */

I think we should explain we are dealing with an errata here, this is 
not obvious at first sight, the patch summary may find its place here :-)

Sylvain

Re: [PATCH v2 04/12] pm: at91: move the copying the sram function to the sram initializationi phase

[Sergei Shtylyov]

Hello.

On 1/26/2015 12:40 PM, Wenyou Yang wrote:

> To decrease the suspend time, move the copying the sram function
> to the sram initialization phase, instead of every time go to suspend.

> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>   arch/arm/mach-at91/pm.c |    7 +++----
>   1 file changed, 3 insertions(+), 4 deletions(-)

> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index 5dd4e41..409185e 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -161,10 +161,6 @@ static int at91_pm_enter(suspend_state_t state)
>   			 * turning off the main oscillator; reverse on wakeup.
>   			 */
>   			if (slow_clock) {
> -#ifdef CONFIG_AT91_SLOW_CLOCK
> -				/* copy slow_clock handler to SRAM, and call it */
> -				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
> -#endif
>   				slow_clock(at91_pmc_base, at91_ramc_base[0],
>   					   at91_ramc_base[1],
>   					   at91_pm_data.memctrl);
> @@ -272,6 +268,9 @@ static void __init at91_pm_sram_init(void)
>   	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
>   	slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
>
> +	/* Copy slow_clock handler to SRAM, and call it */

    You're not calling it here.

> +	memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
> +
>   put_node:
>   	of_node_put(node);
>   }

WBR, Sergei

[PATCH v2 04/12] pm: at91: move the copying the sram function to the sram initializationi phase

[Sergei Shtylyov]

Hello.

On 1/26/2015 12:40 PM, Wenyou Yang wrote:

> To decrease the suspend time, move the copying the sram function
> to the sram initialization phase, instead of every time go to suspend.

> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
>   arch/arm/mach-at91/pm.c |    7 +++----
>   1 file changed, 3 insertions(+), 4 deletions(-)

> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index 5dd4e41..409185e 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -161,10 +161,6 @@ static int at91_pm_enter(suspend_state_t state)
>   			 * turning off the main oscillator; reverse on wakeup.
>   			 */
>   			if (slow_clock) {
> -#ifdef CONFIG_AT91_SLOW_CLOCK
> -				/* copy slow_clock handler to SRAM, and call it */
> -				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
> -#endif
>   				slow_clock(at91_pmc_base, at91_ramc_base[0],
>   					   at91_ramc_base[1],
>   					   at91_pm_data.memctrl);
> @@ -272,6 +268,9 @@ static void __init at91_pm_sram_init(void)
>   	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
>   	slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
>
> +	/* Copy slow_clock handler to SRAM, and call it */

    You're not calling it here.

> +	memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
> +
>   put_node:
>   	of_node_put(node);
>   }

WBR, Sergei

Re: [PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Nicolas Ferre]

Le 26/01/2015 11:36, Sylvain Rochet a écrit :
> Hello Wenyou,
> 
> On Mon, Jan 26, 2015 at 05:38:59PM +0800, Wenyou Yang wrote:
>> From: Peter Rosin <peda@axentia.se>
>>
>> The DDRSDR controller fails miserably to put LPDDR1 memories in
>> self-refresh. Force the controller to think it has DDR2 memories
>> during the self-refresh period, as the DDR2 self-refresh spec is
>> equivalent to LPDDR1, and is correctly implemented in the
>> controller.
>>
>> Assume that the second controller has the same fault, but that is
>> untested.
>>
>> Signed-off-by: Peter Rosin <peda@axentia.se>
>> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>> ---
>>  arch/arm/mach-at91/pm_slowclock.S  |   43 +++++++++++++++++++++++++++++++-----
>>  include/soc/at91/at91sam9_ddrsdr.h |    2 +-
>>  2 files changed, 39 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
>> index e2bfaf5..1155217 100644
>> --- a/arch/arm/mach-at91/pm_slowclock.S
>> +++ b/arch/arm/mach-at91/pm_slowclock.S
>> @@ -100,6 +100,16 @@ ddr_sr_enable:
>>  	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
>>  	bne	sdr_sr_enable
>>  
>> +	/* LPDDR1 --> force DDR2 mode during self-refresh */
> 
> I think we should explain we are dealing with an errata here, this is 
> not obvious at first sight, the patch summary may find its place here :-)

True but the problem is that this errata is not public yet, it will be
in a couple of weeks.

I have the feeling though that the commit message is pretty clear. We'll
maybe add that it"s an actual errata.

Bye,
-- 
Nicolas Ferre

[PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Nicolas Ferre]

Le 26/01/2015 11:36, Sylvain Rochet a ?crit :
> Hello Wenyou,
> 
> On Mon, Jan 26, 2015 at 05:38:59PM +0800, Wenyou Yang wrote:
>> From: Peter Rosin <peda@axentia.se>
>>
>> The DDRSDR controller fails miserably to put LPDDR1 memories in
>> self-refresh. Force the controller to think it has DDR2 memories
>> during the self-refresh period, as the DDR2 self-refresh spec is
>> equivalent to LPDDR1, and is correctly implemented in the
>> controller.
>>
>> Assume that the second controller has the same fault, but that is
>> untested.
>>
>> Signed-off-by: Peter Rosin <peda@axentia.se>
>> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>> ---
>>  arch/arm/mach-at91/pm_slowclock.S  |   43 +++++++++++++++++++++++++++++++-----
>>  include/soc/at91/at91sam9_ddrsdr.h |    2 +-
>>  2 files changed, 39 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
>> index e2bfaf5..1155217 100644
>> --- a/arch/arm/mach-at91/pm_slowclock.S
>> +++ b/arch/arm/mach-at91/pm_slowclock.S
>> @@ -100,6 +100,16 @@ ddr_sr_enable:
>>  	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
>>  	bne	sdr_sr_enable
>>  
>> +	/* LPDDR1 --> force DDR2 mode during self-refresh */
> 
> I think we should explain we are dealing with an errata here, this is 
> not obvious at first sight, the patch summary may find its place here :-)

True but the problem is that this errata is not public yet, it will be
in a couple of weeks.

I have the feeling though that the commit message is pretty clear. We'll
maybe add that it"s an actual errata.

Bye,
-- 
Nicolas Ferre

Re: [PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Sylvain Rochet]

Hello Nicolas,

On Mon, Jan 26, 2015 at 02:34:38PM +0100, Nicolas Ferre wrote:
> Le 26/01/2015 11:36, Sylvain Rochet a écrit :
> > 
> > I think we should explain we are dealing with an errata here, this is 
> > not obvious at first sight, the patch summary may find its place here :-)
> 
> True but the problem is that this errata is not public yet, it will be
> in a couple of weeks.
> 
> I have the feeling though that the commit message is pretty clear. We'll
> maybe add that it"s an actual errata.

Humm, this is not what I meant actually. I only proposed a code source 
comment explaining why this is done this way, the current patch summary 
looked like it will be perfect between /* */ ;-)

Sylvain

[PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Sylvain Rochet]

Hello Nicolas,

On Mon, Jan 26, 2015 at 02:34:38PM +0100, Nicolas Ferre wrote:
> Le 26/01/2015 11:36, Sylvain Rochet a ?crit :
> > 
> > I think we should explain we are dealing with an errata here, this is 
> > not obvious at first sight, the patch summary may find its place here :-)
> 
> True but the problem is that this errata is not public yet, it will be
> in a couple of weeks.
> 
> I have the feeling though that the commit message is pretty clear. We'll
> maybe add that it"s an actual errata.

Humm, this is not what I meant actually. I only proposed a code source 
comment explaining why this is done this way, the current patch summary 
looked like it will be perfect between /* */ ;-)

Sylvain

[PATCH v2 0/2] pm: at91: pm_slowclock: improve reliability of suspend/resume

[Sylvain Rochet]

Changes since v1:
  * I only splitted my patch in two

Sylvain Rochet (2):
  pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts
  pm: at91: pm_slowclock: remove clocks which are already stopped when
    entering slow clock mode

 arch/arm/mach-at91/pm.c           | 12 ++++++++
 arch/arm/mach-at91/pm_slowclock.S | 62 ++-------------------------------------
 2 files changed, 15 insertions(+), 59 deletions(-)

-- 
2.1.4

[PATCH v2 0/2] pm: at91: pm_slowclock: improve reliability of suspend/resume

[Sylvain Rochet]

Changes since v1:
  * I only splitted my patch in two

Sylvain Rochet (2):
  pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts
  pm: at91: pm_slowclock: remove clocks which are already stopped when
    entering slow clock mode

 arch/arm/mach-at91/pm.c           | 12 ++++++++
 arch/arm/mach-at91/pm_slowclock.S | 62 ++-------------------------------------
 2 files changed, 15 insertions(+), 59 deletions(-)

-- 
2.1.4

[PATCH v2 1/2] pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts

[Sylvain Rochet]

Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if
something went wrong instead of continuing in unknown condition. There
is not much we can do if a PLL lock never ends, we are running in SRAM
and we will not be able to connect back the sdram or ddram in order to
be able to fire up a message or just panic.

As a bonus, not decounting the timeout register in slow clock mode
reduce cumulated suspend time and resume time from ~17ms to ~15ms.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
---
 arch/arm/mach-at91/pm_slowclock.S | 33 ++++-----------------------------
 1 file changed, 4 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 2001877..79dfdbe 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -34,11 +34,6 @@
  */
 #undef SLOWDOWN_MASTER_CLOCK
 
-#define MCKRDY_TIMEOUT		1000
-#define MOSCRDY_TIMEOUT 	1000
-#define PLLALOCK_TIMEOUT	1000
-#define PLLBLOCK_TIMEOUT	1000
-
 pmc	.req	r0
 sdramc	.req	r1
 ramc1	.req	r2
@@ -50,56 +45,36 @@ tmp2	.req	r5
  * Wait until master clock is ready (after switching master clock source)
  */
 	.macro wait_mckrdy
-	mov	tmp2, #MCKRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MCKRDY
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until master oscillator has stabilized.
  */
 	.macro wait_moscrdy
-	mov	tmp2, #MOSCRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MOSCS
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until PLLA has locked.
  */
 	.macro wait_pllalock
-	mov	tmp2, #PLLALOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKA
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until PLLB has locked.
  */
 	.macro wait_pllblock
-	mov	tmp2, #PLLBLOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKB
 	beq	1b
-2:
 	.endm
 
 	.text
-- 
2.1.4

[PATCH v2 1/2] pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts

[Sylvain Rochet]

Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if
something went wrong instead of continuing in unknown condition. There
is not much we can do if a PLL lock never ends, we are running in SRAM
and we will not be able to connect back the sdram or ddram in order to
be able to fire up a message or just panic.

As a bonus, not decounting the timeout register in slow clock mode
reduce cumulated suspend time and resume time from ~17ms to ~15ms.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
---
 arch/arm/mach-at91/pm_slowclock.S | 33 ++++-----------------------------
 1 file changed, 4 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 2001877..79dfdbe 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -34,11 +34,6 @@
  */
 #undef SLOWDOWN_MASTER_CLOCK
 
-#define MCKRDY_TIMEOUT		1000
-#define MOSCRDY_TIMEOUT 	1000
-#define PLLALOCK_TIMEOUT	1000
-#define PLLBLOCK_TIMEOUT	1000
-
 pmc	.req	r0
 sdramc	.req	r1
 ramc1	.req	r2
@@ -50,56 +45,36 @@ tmp2	.req	r5
  * Wait until master clock is ready (after switching master clock source)
  */
 	.macro wait_mckrdy
-	mov	tmp2, #MCKRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MCKRDY
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until master oscillator has stabilized.
  */
 	.macro wait_moscrdy
-	mov	tmp2, #MOSCRDY_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MOSCS
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until PLLA has locked.
  */
 	.macro wait_pllalock
-	mov	tmp2, #PLLALOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKA
 	beq	1b
-2:
 	.endm
 
 /*
  * Wait until PLLB has locked.
  */
 	.macro wait_pllblock
-	mov	tmp2, #PLLBLOCK_TIMEOUT
-1:	sub	tmp2, tmp2, #1
-	cmp	tmp2, #0
-	beq	2f
-	ldr	tmp1, [pmc, #AT91_PMC_SR]
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKB
 	beq	1b
-2:
 	.endm
 
 	.text
-- 
2.1.4

[PATCH v2 2/2] pm: at91: pm_slowclock: remove clocks which are already stopped when entering slow clock mode

[Sylvain Rochet]

Assume USB PLL and PLL B are already stopped before entering sleep mode,
print a warning if this isn't the case.

Removed PLL B from slow clock code, all drivers are supposed to properly
unprepare clocks.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
---
 arch/arm/mach-at91/pm.c           | 12 ++++++++++++
 arch/arm/mach-at91/pm_slowclock.S | 31 -------------------------------
 2 files changed, 12 insertions(+), 31 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 81f2f12..a561442 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -98,6 +98,18 @@ static int at91_pm_verify_clocks(void)
 		}
 	}
 
+	/* Drivers should have previously suspended USB PLL */
+	if (at91_pmc_read(AT91_CKGR_UCKR) & AT91_PMC_UPLLEN) {
+		pr_err("AT91: PM - Suspend-to-RAM with USB PLL running\n");
+		return 0;
+	}
+
+	/* Drivers should have previously suspended PLL B */
+	if (at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) {
+		pr_err("AT91: PM - Suspend-to-RAM with PLL B running\n");
+		return 0;
+	}
+
 	return 1;
 }
 
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 79dfdbe..75d8b19 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -68,15 +68,6 @@ tmp2	.req	r5
 	beq	1b
 	.endm
 
-/*
- * Wait until PLLB has locked.
- */
-	.macro wait_pllblock
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKB
-	beq	1b
-	.endm
-
 	.text
 
 /* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
@@ -182,13 +173,6 @@ sdr_sr_done:
 	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
 
-	/* Save PLLB setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLBR]
-	str	tmp1, .saved_pllbr
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
 	/* Turn off the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
@@ -204,18 +188,6 @@ sdr_sr_done:
 
 	wait_moscrdy
 
-	/* Restore PLLB setting */
-	ldr	tmp1, .saved_pllbr
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	1f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	2f
-1:
-	wait_pllblock
-2:
-
 	/* Restore PLLA setting */
 	ldr	tmp1, .saved_pllar
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
@@ -294,9 +266,6 @@ ram_restored:
 .saved_pllar:
 	.word 0
 
-.saved_pllbr:
-	.word 0
-
 .saved_sam9_lpr:
 	.word 0
 
-- 
2.1.4

[PATCH v2 2/2] pm: at91: pm_slowclock: remove clocks which are already stopped when entering slow clock mode

[Sylvain Rochet]

Assume USB PLL and PLL B are already stopped before entering sleep mode,
print a warning if this isn't the case.

Removed PLL B from slow clock code, all drivers are supposed to properly
unprepare clocks.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
---
 arch/arm/mach-at91/pm.c           | 12 ++++++++++++
 arch/arm/mach-at91/pm_slowclock.S | 31 -------------------------------
 2 files changed, 12 insertions(+), 31 deletions(-)

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 81f2f12..a561442 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -98,6 +98,18 @@ static int at91_pm_verify_clocks(void)
 		}
 	}
 
+	/* Drivers should have previously suspended USB PLL */
+	if (at91_pmc_read(AT91_CKGR_UCKR) & AT91_PMC_UPLLEN) {
+		pr_err("AT91: PM - Suspend-to-RAM with USB PLL running\n");
+		return 0;
+	}
+
+	/* Drivers should have previously suspended PLL B */
+	if (at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) {
+		pr_err("AT91: PM - Suspend-to-RAM with PLL B running\n");
+		return 0;
+	}
+
 	return 1;
 }
 
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 79dfdbe..75d8b19 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -68,15 +68,6 @@ tmp2	.req	r5
 	beq	1b
 	.endm
 
-/*
- * Wait until PLLB has locked.
- */
-	.macro wait_pllblock
-1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
-	tst	tmp1, #AT91_PMC_LOCKB
-	beq	1b
-	.endm
-
 	.text
 
 /* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
@@ -182,13 +173,6 @@ sdr_sr_done:
 	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
 
-	/* Save PLLB setting and disable it */
-	ldr	tmp1, [pmc, #AT91_CKGR_PLLBR]
-	str	tmp1, .saved_pllbr
-
-	mov	tmp1, #AT91_PMC_PLLCOUNT
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
 	/* Turn off the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
@@ -204,18 +188,6 @@ sdr_sr_done:
 
 	wait_moscrdy
 
-	/* Restore PLLB setting */
-	ldr	tmp1, .saved_pllbr
-	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
-
-	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
-	bne	1f
-	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
-	beq	2f
-1:
-	wait_pllblock
-2:
-
 	/* Restore PLLA setting */
 	ldr	tmp1, .saved_pllar
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
@@ -294,9 +266,6 @@ ram_restored:
 .saved_pllar:
 	.word 0
 
-.saved_pllbr:
-	.word 0
-
 .saved_sam9_lpr:
 	.word 0
 
-- 
2.1.4

RE: [PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Peter Rosin]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 2147 bytes --]

Sylvain Rochet wrote:
> Hello Nicolas,
> 
> On Mon, Jan 26, 2015 at 02:34:38PM +0100, Nicolas Ferre wrote:
> > Le 26/01/2015 11:36, Sylvain Rochet a écrit :
> > >
> > > I think we should explain we are dealing with an errata here, this
> > > is not obvious at first sight, the patch summary may find its place
> > > here :-)
> >
> > True but the problem is that this errata is not public yet, it will be
> > in a couple of weeks.
> >
> > I have the feeling though that the commit message is pretty clear.
> > We'll maybe add that it"s an actual errata.
> 
> Humm, this is not what I meant actually. I only proposed a code source
> comment explaining why this is done this way, the current patch summary
> looked like it will be perfect between /* */ ;-)

I did not want to fill up the source with wordy comments, and settled
for a one-liner. I don't know much about the underlying reasons other
than the fact that LPDDR1 mode of the controller isn't working properly
in self-refresh and that the DDR2 spec is similar enough to work.

The one-liner comment says about the same thing, but not with so
many words. The comment does make it clear that the switch to DDR2
is intentional, and that is all that is needed as protection from some
future cleanup. I mean, anyone seeing that comment and just erasing
the whole thing without further investigation is not doing a very good
job as there is no reason to intentionally switch from LPDDR1 mode to
DDR2 mode, other that the fact that the LPDDR1 mode isn't working for
some reason. That reason is not to be found in the commit message
and I have no information to improve the situation. IMO, the only thing
missing is a pointer to the as yet unreleased errata, which should explain
the situation clearly for any and all interested parties. May I suggest that
someone who cares sends a patch with the comment update when the
errata is released?

If others feel differently, by all means please reword and expand the
comment.

Cheers,
Peter
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

[PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Peter Rosin]

Sylvain Rochet wrote:
> Hello Nicolas,
> 
> On Mon, Jan 26, 2015 at 02:34:38PM +0100, Nicolas Ferre wrote:
> > Le 26/01/2015 11:36, Sylvain Rochet a ?crit :
> > >
> > > I think we should explain we are dealing with an errata here, this
> > > is not obvious at first sight, the patch summary may find its place
> > > here :-)
> >
> > True but the problem is that this errata is not public yet, it will be
> > in a couple of weeks.
> >
> > I have the feeling though that the commit message is pretty clear.
> > We'll maybe add that it"s an actual errata.
> 
> Humm, this is not what I meant actually. I only proposed a code source
> comment explaining why this is done this way, the current patch summary
> looked like it will be perfect between /* */ ;-)

I did not want to fill up the source with wordy comments, and settled
for a one-liner. I don't know much about the underlying reasons other
than the fact that LPDDR1 mode of the controller isn't working properly
in self-refresh and that the DDR2 spec is similar enough to work.

The one-liner comment says about the same thing, but not with so
many words. The comment does make it clear that the switch to DDR2
is intentional, and that is all that is needed as protection from some
future cleanup. I mean, anyone seeing that comment and just erasing
the whole thing without further investigation is not doing a very good
job as there is no reason to intentionally switch from LPDDR1 mode to
DDR2 mode, other that the fact that the LPDDR1 mode isn't working for
some reason. That reason is not to be found in the commit message
and I have no information to improve the situation. IMO, the only thing
missing is a pointer to the as yet unreleased errata, which should explain
the situation clearly for any and all interested parties. May I suggest that
someone who cares sends a patch with the comment update when the
errata is released?

If others feel differently, by all means please reword and expand the
comment.

Cheers,
Peter

Re: [PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Nicolas Ferre]

Le 26/01/2015 16:58, Peter Rosin a écrit :
> Sylvain Rochet wrote:
>> Hello Nicolas,
>>
>> On Mon, Jan 26, 2015 at 02:34:38PM +0100, Nicolas Ferre wrote:
>>> Le 26/01/2015 11:36, Sylvain Rochet a écrit :
>>>>
>>>> I think we should explain we are dealing with an errata here, this
>>>> is not obvious at first sight, the patch summary may find its place
>>>> here :-)
>>>
>>> True but the problem is that this errata is not public yet, it will be
>>> in a couple of weeks.
>>>
>>> I have the feeling though that the commit message is pretty clear.
>>> We'll maybe add that it"s an actual errata.
>>
>> Humm, this is not what I meant actually. I only proposed a code source
>> comment explaining why this is done this way, the current patch summary
>> looked like it will be perfect between /* */ ;-)
> 
> I did not want to fill up the source with wordy comments, and settled
> for a one-liner. I don't know much about the underlying reasons other
> than the fact that LPDDR1 mode of the controller isn't working properly
> in self-refresh and that the DDR2 spec is similar enough to work.
> 
> The one-liner comment says about the same thing, but not with so
> many words. The comment does make it clear that the switch to DDR2
> is intentional, and that is all that is needed as protection from some
> future cleanup. I mean, anyone seeing that comment and just erasing
> the whole thing without further investigation is not doing a very good
> job as there is no reason to intentionally switch from LPDDR1 mode to
> DDR2 mode, other that the fact that the LPDDR1 mode isn't working for
> some reason. That reason is not to be found in the commit message
> and I have no information to improve the situation. IMO, the only thing
> missing is a pointer to the as yet unreleased errata, which should explain
> the situation clearly for any and all interested parties. May I suggest that
> someone who cares sends a patch with the comment update when the
> errata is released?

That's the option that I'll take.

Let's go for it (and anyone remind me if I don't when the errata is
released).

Bye,


> If others feel differently, by all means please reword and expand the
> comment.
> 
> Cheers,
> Peter
> 


-- 
Nicolas Ferre

[PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Nicolas Ferre]

Le 26/01/2015 16:58, Peter Rosin a ?crit :
> Sylvain Rochet wrote:
>> Hello Nicolas,
>>
>> On Mon, Jan 26, 2015 at 02:34:38PM +0100, Nicolas Ferre wrote:
>>> Le 26/01/2015 11:36, Sylvain Rochet a ?crit :
>>>>
>>>> I think we should explain we are dealing with an errata here, this
>>>> is not obvious at first sight, the patch summary may find its place
>>>> here :-)
>>>
>>> True but the problem is that this errata is not public yet, it will be
>>> in a couple of weeks.
>>>
>>> I have the feeling though that the commit message is pretty clear.
>>> We'll maybe add that it"s an actual errata.
>>
>> Humm, this is not what I meant actually. I only proposed a code source
>> comment explaining why this is done this way, the current patch summary
>> looked like it will be perfect between /* */ ;-)
> 
> I did not want to fill up the source with wordy comments, and settled
> for a one-liner. I don't know much about the underlying reasons other
> than the fact that LPDDR1 mode of the controller isn't working properly
> in self-refresh and that the DDR2 spec is similar enough to work.
> 
> The one-liner comment says about the same thing, but not with so
> many words. The comment does make it clear that the switch to DDR2
> is intentional, and that is all that is needed as protection from some
> future cleanup. I mean, anyone seeing that comment and just erasing
> the whole thing without further investigation is not doing a very good
> job as there is no reason to intentionally switch from LPDDR1 mode to
> DDR2 mode, other that the fact that the LPDDR1 mode isn't working for
> some reason. That reason is not to be found in the commit message
> and I have no information to improve the situation. IMO, the only thing
> missing is a pointer to the as yet unreleased errata, which should explain
> the situation clearly for any and all interested parties. May I suggest that
> someone who cares sends a patch with the comment update when the
> errata is released?

That's the option that I'll take.

Let's go for it (and anyone remind me if I don't when the errata is
released).

Bye,


> If others feel differently, by all means please reword and expand the
> comment.
> 
> Cheers,
> Peter
> 


-- 
Nicolas Ferre

Re: [PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Sylvain Rochet]

Hello Nicolas and Peter,

On Mon, Jan 26, 2015 at 05:04:25PM +0100, Nicolas Ferre wrote:
> Le 26/01/2015 16:58, Peter Rosin a écrit :
> > Sylvain Rochet wrote:
> >> Hello Nicolas,
> >>
> >> On Mon, Jan 26, 2015 at 02:34:38PM +0100, Nicolas Ferre wrote:
> >>> Le 26/01/2015 11:36, Sylvain Rochet a écrit :
> >>>>
> >>>> I think we should explain we are dealing with an errata here, this
> >>>> is not obvious at first sight, the patch summary may find its place
> >>>> here :-)
> >>>
> >>> True but the problem is that this errata is not public yet, it will be
> >>> in a couple of weeks.
> >>>
> >>> I have the feeling though that the commit message is pretty clear.
> >>> We'll maybe add that it"s an actual errata.
> >>
> >> Humm, this is not what I meant actually. I only proposed a code source
> >> comment explaining why this is done this way, the current patch summary
> >> looked like it will be perfect between /* */ ;-)
> > 
> > I did not want to fill up the source with wordy comments, and settled
> > for a one-liner. I don't know much about the underlying reasons other
> > than the fact that LPDDR1 mode of the controller isn't working properly
> > in self-refresh and that the DDR2 spec is similar enough to work.
> > 
> > The one-liner comment says about the same thing, but not with so
> > many words. The comment does make it clear that the switch to DDR2
> > is intentional, and that is all that is needed as protection from some
> > future cleanup. I mean, anyone seeing that comment and just erasing
> > the whole thing without further investigation is not doing a very good
> > job as there is no reason to intentionally switch from LPDDR1 mode to
> > DDR2 mode, other that the fact that the LPDDR1 mode isn't working for
> > some reason. That reason is not to be found in the commit message
> > and I have no information to improve the situation. IMO, the only thing
> > missing is a pointer to the as yet unreleased errata, which should explain
> > the situation clearly for any and all interested parties. May I suggest that
> > someone who cares sends a patch with the comment update when the
> > errata is released?
> 
> That's the option that I'll take.
> 
> Let's go for it (and anyone remind me if I don't when the errata is
> released).

I fully agree with that, a pointer to a datasheet errata is exactly the 
same thing as explaining the issue.

Sylvain

[PATCH v2 02/12] pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.

[Sylvain Rochet]

Hello Nicolas and Peter,

On Mon, Jan 26, 2015 at 05:04:25PM +0100, Nicolas Ferre wrote:
> Le 26/01/2015 16:58, Peter Rosin a ?crit :
> > Sylvain Rochet wrote:
> >> Hello Nicolas,
> >>
> >> On Mon, Jan 26, 2015 at 02:34:38PM +0100, Nicolas Ferre wrote:
> >>> Le 26/01/2015 11:36, Sylvain Rochet a ?crit :
> >>>>
> >>>> I think we should explain we are dealing with an errata here, this
> >>>> is not obvious at first sight, the patch summary may find its place
> >>>> here :-)
> >>>
> >>> True but the problem is that this errata is not public yet, it will be
> >>> in a couple of weeks.
> >>>
> >>> I have the feeling though that the commit message is pretty clear.
> >>> We'll maybe add that it"s an actual errata.
> >>
> >> Humm, this is not what I meant actually. I only proposed a code source
> >> comment explaining why this is done this way, the current patch summary
> >> looked like it will be perfect between /* */ ;-)
> > 
> > I did not want to fill up the source with wordy comments, and settled
> > for a one-liner. I don't know much about the underlying reasons other
> > than the fact that LPDDR1 mode of the controller isn't working properly
> > in self-refresh and that the DDR2 spec is similar enough to work.
> > 
> > The one-liner comment says about the same thing, but not with so
> > many words. The comment does make it clear that the switch to DDR2
> > is intentional, and that is all that is needed as protection from some
> > future cleanup. I mean, anyone seeing that comment and just erasing
> > the whole thing without further investigation is not doing a very good
> > job as there is no reason to intentionally switch from LPDDR1 mode to
> > DDR2 mode, other that the fact that the LPDDR1 mode isn't working for
> > some reason. That reason is not to be found in the commit message
> > and I have no information to improve the situation. IMO, the only thing
> > missing is a pointer to the as yet unreleased errata, which should explain
> > the situation clearly for any and all interested parties. May I suggest that
> > someone who cares sends a patch with the comment update when the
> > errata is released?
> 
> That's the option that I'll take.
> 
> Let's go for it (and anyone remind me if I don't when the errata is
> released).

I fully agree with that, a pointer to a datasheet errata is exactly the 
same thing as explaining the issue.

Sylvain

RE: [PATCH v2 00/12] AT91 pm cleanup for 3.20

[Yang, Wenyou]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1848 bytes --]



> -----Original Message-----
> From: Sylvain Rochet [mailto:sylvain.rochet@finsecur.com]
> Sent: Monday, January 26, 2015 5:56 PM
> To: Yang, Wenyou
> Cc: Ferre, Nicolas; linux@arm.linux.org.uk; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; alexandre.belloni@free-electrons.com;
> peda@axentia.se
> Subject: Re: [PATCH v2 00/12] AT91 pm cleanup for 3.20
> 
> Hello Wenyou,
> 
> On Mon, Jan 26, 2015 at 05:36:45PM +0800, Wenyou Yang wrote:
> > Hi Nicolas,
> >
> > This version is rebased on the branch: at91-3.20-cleanup of the repository
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
> >
> > It is purpose to clean up the PM code, includes the patches from Peter Rosin
> and Sylvain Rochet.
> >
> > Since verifying the USB clock and USB PLL disabling before suspending
> > to memory, it aslo depends on the following patch serials from Sylvain:
> > 	[PATCHv6 0/5] USB: gadget: atmel_usba_udc: Driver improvements
> > 	[PATCHv7 0/6] USB: host: Atmel OHCI and EHCI drivers improvements
> >
> > Removes CONFIG_AT91_SLOW_CLOCK config item to simply the PM config,
> > The suspend to standby mode uses the same sram function as the suspend to
> memory mode.
> > Remove some unused code.
> >
> > Alexandr & Sylvain, Thank you very much for so many feedbacks.
> >
> > Changes in v2:
> >  - Rebase on the at91-3.20-cleanup branch
> >  - Recover the verify clock condition, only for suspend to memory.
> >  - Collect ACK from Alexandre
> >  - Add the macro for PM mode
> 
> Did you fix the slow_clock == NULL condition with the change suggested by
> Alexandre ?
Sorry, didn't. I will send v3 to fix it.

> 
> Sylvain

Best Regards,
Wenyou Yang
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

[PATCH v2 00/12] AT91 pm cleanup for 3.20

[Yang, Wenyou]

> -----Original Message-----
> From: Sylvain Rochet [mailto:sylvain.rochet at finsecur.com]
> Sent: Monday, January 26, 2015 5:56 PM
> To: Yang, Wenyou
> Cc: Ferre, Nicolas; linux at arm.linux.org.uk; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org; alexandre.belloni at free-electrons.com;
> peda at axentia.se
> Subject: Re: [PATCH v2 00/12] AT91 pm cleanup for 3.20
> 
> Hello Wenyou,
> 
> On Mon, Jan 26, 2015 at 05:36:45PM +0800, Wenyou Yang wrote:
> > Hi Nicolas,
> >
> > This version is rebased on the branch: at91-3.20-cleanup of the repository
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
> >
> > It is purpose to clean up the PM code, includes the patches from Peter Rosin
> and Sylvain Rochet.
> >
> > Since verifying the USB clock and USB PLL disabling before suspending
> > to memory, it aslo depends on the following patch serials from Sylvain:
> > 	[PATCHv6 0/5] USB: gadget: atmel_usba_udc: Driver improvements
> > 	[PATCHv7 0/6] USB: host: Atmel OHCI and EHCI drivers improvements
> >
> > Removes CONFIG_AT91_SLOW_CLOCK config item to simply the PM config,
> > The suspend to standby mode uses the same sram function as the suspend to
> memory mode.
> > Remove some unused code.
> >
> > Alexandr & Sylvain, Thank you very much for so many feedbacks.
> >
> > Changes in v2:
> >  - Rebase on the at91-3.20-cleanup branch
> >  - Recover the verify clock condition, only for suspend to memory.
> >  - Collect ACK from Alexandre
> >  - Add the macro for PM mode
> 
> Did you fix the slow_clock == NULL condition with the change suggested by
> Alexandre ?
Sorry, didn't. I will send v3 to fix it.

> 
> Sylvain

Best Regards,
Wenyou Yang

RE: [PATCH v2 04/12] pm: at91: move the copying the sram function to the sram initializationi phase

[Yang, Wenyou]

Hi Sergei,

Thank you for your review.

> -----Original Message-----
> From: Sergei Shtylyov [mailto:sergei.shtylyov@cogentembedded.com]
> Sent: Monday, January 26, 2015 8:57 PM
> To: Yang, Wenyou; Ferre, Nicolas; linux@arm.linux.org.uk
> Cc: sylvain.rochet@finsecur.com; linux-kernel@vger.kernel.org;
> alexandre.belloni@free-electrons.com; peda@axentia.se; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH v2 04/12] pm: at91: move the copying the sram function to
> the sram initializationi phase
> 
> Hello.
> 
> On 1/26/2015 12:40 PM, Wenyou Yang wrote:
> 
> > To decrease the suspend time, move the copying the sram function to
> > the sram initialization phase, instead of every time go to suspend.
> 
> > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> > Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > ---
> >   arch/arm/mach-at91/pm.c |    7 +++----
> >   1 file changed, 3 insertions(+), 4 deletions(-)
> 
> > diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index
> > 5dd4e41..409185e 100644
> > --- a/arch/arm/mach-at91/pm.c
> > +++ b/arch/arm/mach-at91/pm.c
> > @@ -161,10 +161,6 @@ static int at91_pm_enter(suspend_state_t state)
> >   			 * turning off the main oscillator; reverse on wakeup.
> >   			 */
> >   			if (slow_clock) {
> > -#ifdef CONFIG_AT91_SLOW_CLOCK
> > -				/* copy slow_clock handler to SRAM, and call it */
> > -				memcpy(slow_clock, at91_slow_clock,
> at91_slow_clock_sz);
> > -#endif
> >   				slow_clock(at91_pmc_base, at91_ramc_base[0],
> >   					   at91_ramc_base[1],
> >   					   at91_pm_data.memctrl);
> > @@ -272,6 +268,9 @@ static void __init at91_pm_sram_init(void)
> >   	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
> >   	slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz,
> > false);
> >
> > +	/* Copy slow_clock handler to SRAM, and call it */
> 
>     You're not calling it here.
> 
> > +	memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
> > +
> >   put_node:
> >   	of_node_put(node);
> >   }
> 
> WBR, Sergei

Best Regards,
Wenyou Yang

[PATCH v2 04/12] pm: at91: move the copying the sram function to the sram initializationi phase

[Yang, Wenyou]

Hi Sergei,

Thank you for your review.

> -----Original Message-----
> From: Sergei Shtylyov [mailto:sergei.shtylyov at cogentembedded.com]
> Sent: Monday, January 26, 2015 8:57 PM
> To: Yang, Wenyou; Ferre, Nicolas; linux at arm.linux.org.uk
> Cc: sylvain.rochet at finsecur.com; linux-kernel at vger.kernel.org;
> alexandre.belloni at free-electrons.com; peda at axentia.se; linux-arm-
> kernel at lists.infradead.org
> Subject: Re: [PATCH v2 04/12] pm: at91: move the copying the sram function to
> the sram initializationi phase
> 
> Hello.
> 
> On 1/26/2015 12:40 PM, Wenyou Yang wrote:
> 
> > To decrease the suspend time, move the copying the sram function to
> > the sram initialization phase, instead of every time go to suspend.
> 
> > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
> > Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> > ---
> >   arch/arm/mach-at91/pm.c |    7 +++----
> >   1 file changed, 3 insertions(+), 4 deletions(-)
> 
> > diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index
> > 5dd4e41..409185e 100644
> > --- a/arch/arm/mach-at91/pm.c
> > +++ b/arch/arm/mach-at91/pm.c
> > @@ -161,10 +161,6 @@ static int at91_pm_enter(suspend_state_t state)
> >   			 * turning off the main oscillator; reverse on wakeup.
> >   			 */
> >   			if (slow_clock) {
> > -#ifdef CONFIG_AT91_SLOW_CLOCK
> > -				/* copy slow_clock handler to SRAM, and call it */
> > -				memcpy(slow_clock, at91_slow_clock,
> at91_slow_clock_sz);
> > -#endif
> >   				slow_clock(at91_pmc_base, at91_ramc_base[0],
> >   					   at91_ramc_base[1],
> >   					   at91_pm_data.memctrl);
> > @@ -272,6 +268,9 @@ static void __init at91_pm_sram_init(void)
> >   	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
> >   	slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz,
> > false);
> >
> > +	/* Copy slow_clock handler to SRAM, and call it */
> 
>     You're not calling it here.
> 
> > +	memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
> > +
> >   put_node:
> >   	of_node_put(node);
> >   }
> 
> WBR, Sergei

Best Regards,
Wenyou Yang

RE: [PATCH v2 07/12] pm: at91: the standby mode uses the same sram function as the suspend to memory mode

[Yang, Wenyou]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1496 bytes --]

Hi Sylvain,

> -----Original Message-----
> From: Sylvain Rochet [mailto:sylvain.rochet@finsecur.com]
> Sent: Monday, January 26, 2015 6:10 PM
> To: Yang, Wenyou
> Cc: Ferre, Nicolas; linux@arm.linux.org.uk; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; alexandre.belloni@free-electrons.com;
> peda@axentia.se
> Subject: Re: [PATCH v2 07/12] pm: at91: the standby mode uses the same sram
> function as the suspend to memory mode
> 
> Hello Wenyou,
> 
> 
> On Mon, Jan 26, 2015 at 05:42:11PM +0800, Wenyou Yang wrote:
> > +static int at91_pm_verify_clocks(suspend_state_t state)
> >  {
> >  	unsigned long scsr;
> >  	int i;
> >
> > +	/* For PM_SUSPEND_STANDBY, skip verifying the clock */
> > +	if (state == PM_SUSPEND_STANDBY)
> > +		return 1;
> > +
> 
> In my opinion we should use the select() already in place in
> at91_pm_enter() to do that:
Accepted. Thanks

> 
> >  static int at91_pm_enter(suspend_state_t state)  {
> >  	at91_pinctrl_gpio_suspend();
> >
> >  	switch (state) {
>      (...)
> > +	case PM_SUSPEND_MEM:
> 
> 	/*
> 	 * Ensure that clocks are in a valid state.
> 	 */
> 	if (!at91_pm_verify_clocks())
> 		goto error;
> 	/* FALLTHROUGH */
> 
> > +	case PM_SUSPEND_STANDBY:
> >  		/*
> > -		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
> 
> 
> Sylvain

Best Regards,
Wenyou Yang
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

[PATCH v2 07/12] pm: at91: the standby mode uses the same sram function as the suspend to memory mode

[Yang, Wenyou]

Hi Sylvain,

> -----Original Message-----
> From: Sylvain Rochet [mailto:sylvain.rochet at finsecur.com]
> Sent: Monday, January 26, 2015 6:10 PM
> To: Yang, Wenyou
> Cc: Ferre, Nicolas; linux at arm.linux.org.uk; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org; alexandre.belloni at free-electrons.com;
> peda at axentia.se
> Subject: Re: [PATCH v2 07/12] pm: at91: the standby mode uses the same sram
> function as the suspend to memory mode
> 
> Hello Wenyou,
> 
> 
> On Mon, Jan 26, 2015 at 05:42:11PM +0800, Wenyou Yang wrote:
> > +static int at91_pm_verify_clocks(suspend_state_t state)
> >  {
> >  	unsigned long scsr;
> >  	int i;
> >
> > +	/* For PM_SUSPEND_STANDBY, skip verifying the clock */
> > +	if (state == PM_SUSPEND_STANDBY)
> > +		return 1;
> > +
> 
> In my opinion we should use the select() already in place in
> at91_pm_enter() to do that:
Accepted. Thanks

> 
> >  static int at91_pm_enter(suspend_state_t state)  {
> >  	at91_pinctrl_gpio_suspend();
> >
> >  	switch (state) {
>      (...)
> > +	case PM_SUSPEND_MEM:
> 
> 	/*
> 	 * Ensure that clocks are in a valid state.
> 	 */
> 	if (!at91_pm_verify_clocks())
> 		goto error;
> 	/* FALLTHROUGH */
> 
> > +	case PM_SUSPEND_STANDBY:
> >  		/*
> > -		 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
> 
> 
> Sylvain

Best Regards,
Wenyou Yang