* ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb @ 2021-05-24 8:27 Zoran 2021-05-24 12:24 ` [yocto] " Quentin Schulz 0 siblings, 1 reply; 6+ messages in thread From: Zoran @ 2021-05-24 8:27 UTC (permalink / raw) To: Yocto-mailing-list; +Cc: Scott Ellis Hello again to YOCTO Folks, Here is another blunder I ran into while fixing a yocto-setup.sh script: https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly. I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and approximately after: Parsing recipes: 9% |########## The following message pops up! Loading cache: 100% | | ETA: --:--:-- Loaded 0 entries from dependency cache. ERROR: ParseError at /home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb Summary: There was 1 WARNING message shown. Summary: There was 1 ERROR message shown, returning a non-zero exit code. If you peek into the following github repos: https://github.com/jumpnow/meta-bbb https://github.com/jumpnow/meta-jumpnow You'll see that in later images/basic-dev-image.bb does exist, as well as in the dunfell branch: https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb As well as in gatesgarth branch: https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb What I see upon the logic, something changes in poky/ setup, while transitioning from dunfell to gatesgarth. I also have created an issue in bbb-yocto repo: https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3 I would appreciate any ideas or hints... Maybe some changes required in local.conf ? You can all try it yourselves, and see the same! Thank you, Zoran _______ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [yocto] ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb 2021-05-24 8:27 ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb Zoran @ 2021-05-24 12:24 ` Quentin Schulz 2021-05-24 14:09 ` Zoran 0 siblings, 1 reply; 6+ messages in thread From: Quentin Schulz @ 2021-05-24 12:24 UTC (permalink / raw) To: yocto, Zoran, Yocto-mailing-list; +Cc: Scott Ellis Hi Zoran, On May 24, 2021 8:27:58 AM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote: >Hello again to YOCTO Folks, > >Here is another blunder I ran into while fixing a yocto-setup.sh script: >https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh > >While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly. > >I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and >approximately after: >Parsing recipes: 9% |########## > >The following message pops up! >Loading cache: 100% | > | ETA: --:--:-- >Loaded 0 entries from dependency cache. >ERROR: ParseError at >/home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: >Could not include required file images/basic-dev-image.bb > >Summary: There was 1 WARNING message shown. >Summary: There was 1 ERROR message shown, returning a non-zero exit code. > The layer is not included. Check in your bblayers.conf. see https://github.com/ZoranStojsavljevic/bbb-yocto/blob/a6e8e8ce491705816d02df58fa0ef9378b18ef83/yocto-setup.sh#L114 where you are missing the gatesgarth check. Cheers, Quentin >If you peek into the following github repos: >https://github.com/jumpnow/meta-bbb >https://github.com/jumpnow/meta-jumpnow > >You'll see that in later images/basic-dev-image.bb does exist, as >well as in the dunfell branch: >https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb > >As well as in gatesgarth branch: >https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb > >What I see upon the logic, something changes in poky/ setup, while >transitioning from dunfell to gatesgarth. > >I also have created an issue in bbb-yocto repo: >https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3 > >I would appreciate any ideas or hints... Maybe some changes required >in local.conf ? > >You can all try it yourselves, and see the same! > >Thank you, >Zoran >_______ -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [yocto] ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb 2021-05-24 12:24 ` [yocto] " Quentin Schulz @ 2021-05-24 14:09 ` Zoran 2021-05-24 14:13 ` Zoran 0 siblings, 1 reply; 6+ messages in thread From: Zoran @ 2021-05-24 14:09 UTC (permalink / raw) To: Quentin Schulz; +Cc: Yocto-mailing-list, Scott Ellis Hello Quentin, Thank you for finding the bug. It was in front of my eyes (I print all the layers at the end of setup, but I missed to compare bb-layers from dunfell with bb-layers from gatesgarth). I should do better. With regards to testing thinking. ;-) _______ Now, there are other bugs (I should say, new features introduced). Loading cache: 100% |################################################################################################| Time: 0:00:00 Loaded 3533 entries from dependency cache. Parsing recipes: 100% |##############################################################################################| Time: 0:00:00 Parsing of 2311 .bb files complete (2309 cached, 2 parsed). 3535 targets, 121 skipped, 1 masked, 0 errors. NOTE: Resolving any missing task queue dependencies ERROR: Nothing RPROVIDES 'dhcp-libs' (but /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb RDEPENDS on or otherwise requires it) NOTE: Runtime target 'dhcp-libs' is unbuildable, removing... Missing or unbuildable dependency chain was: ['dhcp-libs'] ERROR: Nothing RPROVIDES 'dhcp-server' (but /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb RDEPENDS on or otherwise requires it) NOTE: Runtime target 'dhcp-server' is unbuildable, removing... Missing or unbuildable dependency chain was: ['dhcp-server'] ERROR: Nothing RPROVIDES 'dhcp-server-config' (but /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb RDEPENDS on or otherwise requires it) NOTE: Runtime target 'dhcp-server-config' is unbuildable, removing... Missing or unbuildable dependency chain was: ['dhcp-server-config'] ERROR: Nothing RPROVIDES 'dhcp-client' (but /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb RDEPENDS on or otherwise requires it) NOTE: Runtime target 'dhcp-client' is unbuildable, removing... Missing or unbuildable dependency chain was: ['dhcp-client'] ERROR: Nothing RPROVIDES 'dhcp-relay' (but /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb RDEPENDS on or otherwise requires it) NOTE: Runtime target 'dhcp-relay' is unbuildable, removing... Missing or unbuildable dependency chain was: ['dhcp-relay'] ERROR: Nothing RPROVIDES 'dhcp-omshell' (but /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb RDEPENDS on or otherwise requires it) NOTE: Runtime target 'dhcp-omshell' is unbuildable, removing... Missing or unbuildable dependency chain was: ['dhcp-omshell'] Seems that this line in local.conf got severely changed, or most likely the DHCP package version/handling got changed: CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcp-libs dhcp-server dhcp-server-config dhcp-client dhcp-relay dhcp-omshell cmake libsocketcan nfs-utils rt-tests strace procps packagegroup-core-buildessential " The question is: what should I include in the CORE_IMAGE_EXTRA_INSTALL_append for the DHCP package for gatesgarth and later releases??? Thank you, Zoran _______ On Mon, May 24, 2021 at 2:24 PM Quentin Schulz <foss@0leil.net> wrote: > > Hi Zoran, > > On May 24, 2021 8:27:58 AM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote: > >Hello again to YOCTO Folks, > > > >Here is another blunder I ran into while fixing a yocto-setup.sh script: > >https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh > > > >While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly. > > > >I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and > >approximately after: > >Parsing recipes: 9% |########## > > > >The following message pops up! > >Loading cache: 100% | > > | ETA: --:--:-- > >Loaded 0 entries from dependency cache. > >ERROR: ParseError at > >/home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: > >Could not include required file images/basic-dev-image.bb > > > >Summary: There was 1 WARNING message shown. > >Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > > The layer is not included. Check in your bblayers.conf. see https://github.com/ZoranStojsavljevic/bbb-yocto/blob/a6e8e8ce491705816d02df58fa0ef9378b18ef83/yocto-setup.sh#L114 where you are missing the gatesgarth check. > > Cheers, > Quentin > > > >If you peek into the following github repos: > >https://github.com/jumpnow/meta-bbb > >https://github.com/jumpnow/meta-jumpnow > > > >You'll see that in later images/basic-dev-image.bb does exist, as > >well as in the dunfell branch: > >https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb > > > >As well as in gatesgarth branch: > >https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb > > > >What I see upon the logic, something changes in poky/ setup, while > >transitioning from dunfell to gatesgarth. > > > >I also have created an issue in bbb-yocto repo: > >https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3 > > > >I would appreciate any ideas or hints... Maybe some changes required > >in local.conf ? > > > >You can all try it yourselves, and see the same! > > > >Thank you, > >Zoran > >_______ > > -- > Sent from my Android device with K-9 Mail. Please excuse my brevity. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [yocto] ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb 2021-05-24 14:09 ` Zoran @ 2021-05-24 14:13 ` Zoran 2021-05-24 19:27 ` Quentin Schulz 0 siblings, 1 reply; 6+ messages in thread From: Zoran @ 2021-05-24 14:13 UTC (permalink / raw) To: Quentin Schulz; +Cc: Yocto-mailing-list, Scott Ellis Or, maybe, now the DHCP is included in the releases by default? Thank you, Zoran _______ On Mon, May 24, 2021 at 4:09 PM Zoran Stojsavljevic <zoran.stojsavljevic@gmail.com> wrote: > > Hello Quentin, > > Thank you for finding the bug. It was in front of my eyes (I print all > the layers at the end of setup, but I missed to compare bb-layers from > dunfell with bb-layers from gatesgarth). > > I should do better. With regards to testing thinking. ;-) > _______ > > Now, there are other bugs (I should say, new features introduced). > > Loading cache: 100% > |################################################################################################| > Time: 0:00:00 > Loaded 3533 entries from dependency cache. > Parsing recipes: 100% > |##############################################################################################| > Time: 0:00:00 > Parsing of 2311 .bb files complete (2309 cached, 2 parsed). 3535 > targets, 121 skipped, 1 masked, 0 errors. > NOTE: Resolving any missing task queue dependencies > ERROR: Nothing RPROVIDES 'dhcp-libs' (but > /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > RDEPENDS on or otherwise requires it) > NOTE: Runtime target 'dhcp-libs' is unbuildable, removing... > Missing or unbuildable dependency chain was: ['dhcp-libs'] > ERROR: Nothing RPROVIDES 'dhcp-server' (but > /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > RDEPENDS on or otherwise requires it) > NOTE: Runtime target 'dhcp-server' is unbuildable, removing... > Missing or unbuildable dependency chain was: ['dhcp-server'] > ERROR: Nothing RPROVIDES 'dhcp-server-config' (but > /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > RDEPENDS on or otherwise requires it) > NOTE: Runtime target 'dhcp-server-config' is unbuildable, removing... > Missing or unbuildable dependency chain was: ['dhcp-server-config'] > ERROR: Nothing RPROVIDES 'dhcp-client' (but > /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > RDEPENDS on or otherwise requires it) > NOTE: Runtime target 'dhcp-client' is unbuildable, removing... > Missing or unbuildable dependency chain was: ['dhcp-client'] > ERROR: Nothing RPROVIDES 'dhcp-relay' (but > /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > RDEPENDS on or otherwise requires it) > NOTE: Runtime target 'dhcp-relay' is unbuildable, removing... > Missing or unbuildable dependency chain was: ['dhcp-relay'] > ERROR: Nothing RPROVIDES 'dhcp-omshell' (but > /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > RDEPENDS on or otherwise requires it) > NOTE: Runtime target 'dhcp-omshell' is unbuildable, removing... > Missing or unbuildable dependency chain was: ['dhcp-omshell'] > > Seems that this line in local.conf got severely changed, or most > likely the DHCP package version/handling got changed: > > CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcp-libs dhcp-server > dhcp-server-config dhcp-client dhcp-relay dhcp-omshell cmake > libsocketcan nfs-utils rt-tests strace procps > packagegroup-core-buildessential " > > The question is: what should I include in the > CORE_IMAGE_EXTRA_INSTALL_append for the DHCP package for gatesgarth > and later releases??? > > Thank you, > Zoran > _______ > > On Mon, May 24, 2021 at 2:24 PM Quentin Schulz <foss@0leil.net> wrote: > > > > Hi Zoran, > > > > On May 24, 2021 8:27:58 AM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote: > > >Hello again to YOCTO Folks, > > > > > >Here is another blunder I ran into while fixing a yocto-setup.sh script: > > >https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh > > > > > >While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly. > > > > > >I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and > > >approximately after: > > >Parsing recipes: 9% |########## > > > > > >The following message pops up! > > >Loading cache: 100% | > > > | ETA: --:--:-- > > >Loaded 0 entries from dependency cache. > > >ERROR: ParseError at > > >/home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: > > >Could not include required file images/basic-dev-image.bb > > > > > >Summary: There was 1 WARNING message shown. > > >Summary: There was 1 ERROR message shown, returning a non-zero exit code. > > > > > > > The layer is not included. Check in your bblayers.conf. see https://github.com/ZoranStojsavljevic/bbb-yocto/blob/a6e8e8ce491705816d02df58fa0ef9378b18ef83/yocto-setup.sh#L114 where you are missing the gatesgarth check. > > > > Cheers, > > Quentin > > > > > > >If you peek into the following github repos: > > >https://github.com/jumpnow/meta-bbb > > >https://github.com/jumpnow/meta-jumpnow > > > > > >You'll see that in later images/basic-dev-image.bb does exist, as > > >well as in the dunfell branch: > > >https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb > > > > > >As well as in gatesgarth branch: > > >https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb > > > > > >What I see upon the logic, something changes in poky/ setup, while > > >transitioning from dunfell to gatesgarth. > > > > > >I also have created an issue in bbb-yocto repo: > > >https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3 > > > > > >I would appreciate any ideas or hints... Maybe some changes required > > >in local.conf ? > > > > > >You can all try it yourselves, and see the same! > > > > > >Thank you, > > >Zoran > > >_______ > > > > -- > > Sent from my Android device with K-9 Mail. Please excuse my brevity. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [yocto] ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb 2021-05-24 14:13 ` Zoran @ 2021-05-24 19:27 ` Quentin Schulz 2021-05-25 4:35 ` Zoran 0 siblings, 1 reply; 6+ messages in thread From: Quentin Schulz @ 2021-05-24 19:27 UTC (permalink / raw) To: yocto, Zoran; +Cc: Yocto-mailing-list, Scott Ellis On May 24, 2021 2:13:57 PM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote: >Or, maybe, now the DHCP is included in the releases by default? > >Thank you, >Zoran >_______ > >On Mon, May 24, 2021 at 4:09 PM Zoran Stojsavljevic ><zoran.stojsavljevic@gmail.com> wrote: >> >> Hello Quentin, >> >> Thank you for finding the bug. It was in front of my eyes (I print all >> the layers at the end of setup, but I missed to compare bb-layers from >> dunfell with bb-layers from gatesgarth). >> >> I should do better. With regards to testing thinking. ;-) >> _______ >> >> Now, there are other bugs (I should say, new features introduced). >> >> Loading cache: 100% >> |################################################################################################| >> Time: 0:00:00 >> Loaded 3533 entries from dependency cache. >> Parsing recipes: 100% >> |##############################################################################################| >> Time: 0:00:00 >> Parsing of 2311 .bb files complete (2309 cached, 2 parsed). 3535 >> targets, 121 skipped, 1 masked, 0 errors. >> NOTE: Resolving any missing task queue dependencies >> ERROR: Nothing RPROVIDES 'dhcp-libs' (but >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb >> RDEPENDS on or otherwise requires it) >> NOTE: Runtime target 'dhcp-libs' is unbuildable, removing... >> Missing or unbuildable dependency chain was: ['dhcp-libs'] >> ERROR: Nothing RPROVIDES 'dhcp-server' (but >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb >> RDEPENDS on or otherwise requires it) >> NOTE: Runtime target 'dhcp-server' is unbuildable, removing... >> Missing or unbuildable dependency chain was: ['dhcp-server'] >> ERROR: Nothing RPROVIDES 'dhcp-server-config' (but >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb >> RDEPENDS on or otherwise requires it) >> NOTE: Runtime target 'dhcp-server-config' is unbuildable, removing... >> Missing or unbuildable dependency chain was: ['dhcp-server-config'] >> ERROR: Nothing RPROVIDES 'dhcp-client' (but >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb >> RDEPENDS on or otherwise requires it) >> NOTE: Runtime target 'dhcp-client' is unbuildable, removing... >> Missing or unbuildable dependency chain was: ['dhcp-client'] >> ERROR: Nothing RPROVIDES 'dhcp-relay' (but >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb >> RDEPENDS on or otherwise requires it) >> NOTE: Runtime target 'dhcp-relay' is unbuildable, removing... >> Missing or unbuildable dependency chain was: ['dhcp-relay'] >> ERROR: Nothing RPROVIDES 'dhcp-omshell' (but >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb >> RDEPENDS on or otherwise requires it) >> NOTE: Runtime target 'dhcp-omshell' is unbuildable, removing... >> Missing or unbuildable dependency chain was: ['dhcp-omshell'] >> >> Seems that this line in local.conf got severely changed, or most >> likely the DHCP package version/handling got changed: >> >> CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcp-libs dhcp-server >> dhcp-server-config dhcp-client dhcp-relay dhcp-omshell cmake >> libsocketcan nfs-utils rt-tests strace procps >> packagegroup-core-buildessential " >> >> The question is: what should I include in the >> CORE_IMAGE_EXTRA_INSTALL_append for the DHCP package for gatesgarth >> and later releases??? >> If I remember correctly, dhcp-server has been replaced by kea, check on that side maybe. Read the migration notes, pretty sure the kea thing is listed there. Cheers, Quentin >> Thank you, >> Zoran >> _______ >> >> On Mon, May 24, 2021 at 2:24 PM Quentin Schulz <foss@0leil.net> wrote: >> > >> > Hi Zoran, >> > >> > On May 24, 2021 8:27:58 AM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote: >> > >Hello again to YOCTO Folks, >> > > >> > >Here is another blunder I ran into while fixing a yocto-setup.sh script: >> > >https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh >> > > >> > >While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly. >> > > >> > >I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and >> > >approximately after: >> > >Parsing recipes: 9% |########## >> > > >> > >The following message pops up! >> > >Loading cache: 100% | >> > > | ETA: --:--:-- >> > >Loaded 0 entries from dependency cache. >> > >ERROR: ParseError at >> > >/home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: >> > >Could not include required file images/basic-dev-image.bb >> > > >> > >Summary: There was 1 WARNING message shown. >> > >Summary: There was 1 ERROR message shown, returning a non-zero exit code. >> > > >> > >> > The layer is not included. Check in your bblayers.conf. see https://github.com/ZoranStojsavljevic/bbb-yocto/blob/a6e8e8ce491705816d02df58fa0ef9378b18ef83/yocto-setup.sh#L114 where you are missing the gatesgarth check. >> > >> > Cheers, >> > Quentin >> > >> > >> > >If you peek into the following github repos: >> > >https://github.com/jumpnow/meta-bbb >> > >https://github.com/jumpnow/meta-jumpnow >> > > >> > >You'll see that in later images/basic-dev-image.bb does exist, as >> > >well as in the dunfell branch: >> > >https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb >> > > >> > >As well as in gatesgarth branch: >> > >https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb >> > > >> > >What I see upon the logic, something changes in poky/ setup, while >> > >transitioning from dunfell to gatesgarth. >> > > >> > >I also have created an issue in bbb-yocto repo: >> > >https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3 >> > > >> > >I would appreciate any ideas or hints... Maybe some changes required >> > >in local.conf ? >> > > >> > >You can all try it yourselves, and see the same! >> > > >> > >Thank you, >> > >Zoran >> > >_______ >> > >> > -- >> > Sent from my Android device with K-9 Mail. Please excuse my brevity. -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [yocto] ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb 2021-05-24 19:27 ` Quentin Schulz @ 2021-05-25 4:35 ` Zoran 0 siblings, 0 replies; 6+ messages in thread From: Zoran @ 2021-05-25 4:35 UTC (permalink / raw) To: Quentin Schulz; +Cc: Yocto-mailing-list, Scott Ellis > IIRC, dhcp-server has been replaced by kea, check on that side maybe. > Read the migration notes, pretty sure the kea thing is listed there. Done. All fixed according to Quentin's recommendations. https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh#L114 https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/bbb-releases/bbb-gatesgarth/local.conf#L18 https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/bbb-releases/bbb-gatesgarth/local.conf_kernel#L26 Added to README.md . https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/README.md Thank you, Zoran _______ On Mon, May 24, 2021 at 9:27 PM Quentin Schulz <foss@0leil.net> wrote: > > > > On May 24, 2021 2:13:57 PM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote: > >Or, maybe, now the DHCP is included in the releases by default? > > > >Thank you, > >Zoran > >_______ > > > >On Mon, May 24, 2021 at 4:09 PM Zoran Stojsavljevic > ><zoran.stojsavljevic@gmail.com> wrote: > >> > >> Hello Quentin, > >> > >> Thank you for finding the bug. It was in front of my eyes (I print all > >> the layers at the end of setup, but I missed to compare bb-layers from > >> dunfell with bb-layers from gatesgarth). > >> > >> I should do better. With regards to testing thinking. ;-) > >> _______ > >> > >> Now, there are other bugs (I should say, new features introduced). > >> > >> Loading cache: 100% > >> |################################################################################################| > >> Time: 0:00:00 > >> Loaded 3533 entries from dependency cache. > >> Parsing recipes: 100% > >> |##############################################################################################| > >> Time: 0:00:00 > >> Parsing of 2311 .bb files complete (2309 cached, 2 parsed). 3535 > >> targets, 121 skipped, 1 masked, 0 errors. > >> NOTE: Resolving any missing task queue dependencies > >> ERROR: Nothing RPROVIDES 'dhcp-libs' (but > >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > >> RDEPENDS on or otherwise requires it) > >> NOTE: Runtime target 'dhcp-libs' is unbuildable, removing... > >> Missing or unbuildable dependency chain was: ['dhcp-libs'] > >> ERROR: Nothing RPROVIDES 'dhcp-server' (but > >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > >> RDEPENDS on or otherwise requires it) > >> NOTE: Runtime target 'dhcp-server' is unbuildable, removing... > >> Missing or unbuildable dependency chain was: ['dhcp-server'] > >> ERROR: Nothing RPROVIDES 'dhcp-server-config' (but > >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > >> RDEPENDS on or otherwise requires it) > >> NOTE: Runtime target 'dhcp-server-config' is unbuildable, removing... > >> Missing or unbuildable dependency chain was: ['dhcp-server-config'] > >> ERROR: Nothing RPROVIDES 'dhcp-client' (but > >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > >> RDEPENDS on or otherwise requires it) > >> NOTE: Runtime target 'dhcp-client' is unbuildable, removing... > >> Missing or unbuildable dependency chain was: ['dhcp-client'] > >> ERROR: Nothing RPROVIDES 'dhcp-relay' (but > >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > >> RDEPENDS on or otherwise requires it) > >> NOTE: Runtime target 'dhcp-relay' is unbuildable, removing... > >> Missing or unbuildable dependency chain was: ['dhcp-relay'] > >> ERROR: Nothing RPROVIDES 'dhcp-omshell' (but > >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb > >> RDEPENDS on or otherwise requires it) > >> NOTE: Runtime target 'dhcp-omshell' is unbuildable, removing... > >> Missing or unbuildable dependency chain was: ['dhcp-omshell'] > >> > >> Seems that this line in local.conf got severely changed, or most > >> likely the DHCP package version/handling got changed: > >> > >> CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcp-libs dhcp-server > >> dhcp-server-config dhcp-client dhcp-relay dhcp-omshell cmake > >> libsocketcan nfs-utils rt-tests strace procps > >> packagegroup-core-buildessential " > >> > >> The question is: what should I include in the > >> CORE_IMAGE_EXTRA_INSTALL_append for the DHCP package for gatesgarth > >> and later releases??? > >> > > If I remember correctly, dhcp-server has been replaced by kea, check on that side maybe. Read the migration notes, pretty sure the kea thing is listed there. > > Cheers, > Quentin > > >> Thank you, > >> Zoran > >> _______ > >> > >> On Mon, May 24, 2021 at 2:24 PM Quentin Schulz <foss@0leil.net> wrote: > >> > > >> > Hi Zoran, > >> > > >> > On May 24, 2021 8:27:58 AM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote: > >> > >Hello again to YOCTO Folks, > >> > > > >> > >Here is another blunder I ran into while fixing a yocto-setup.sh script: > >> > >https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh > >> > > > >> > >While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly. > >> > > > >> > >I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and > >> > >approximately after: > >> > >Parsing recipes: 9% |########## > >> > > > >> > >The following message pops up! > >> > >Loading cache: 100% | > >> > > | ETA: --:--:-- > >> > >Loaded 0 entries from dependency cache. > >> > >ERROR: ParseError at > >> > >/home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: > >> > >Could not include required file images/basic-dev-image.bb > >> > > > >> > >Summary: There was 1 WARNING message shown. > >> > >Summary: There was 1 ERROR message shown, returning a non-zero exit code. > >> > > > >> > > >> > The layer is not included. Check in your bblayers.conf. see https://github.com/ZoranStojsavljevic/bbb-yocto/blob/a6e8e8ce491705816d02df58fa0ef9378b18ef83/yocto-setup.sh#L114 where you are missing the gatesgarth check. > >> > > >> > Cheers, > >> > Quentin > >> > > >> > > >> > >If you peek into the following github repos: > >> > >https://github.com/jumpnow/meta-bbb > >> > >https://github.com/jumpnow/meta-jumpnow > >> > > > >> > >You'll see that in later images/basic-dev-image.bb does exist, as > >> > >well as in the dunfell branch: > >> > >https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb > >> > > > >> > >As well as in gatesgarth branch: > >> > >https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb > >> > > > >> > >What I see upon the logic, something changes in poky/ setup, while > >> > >transitioning from dunfell to gatesgarth. > >> > > > >> > >I also have created an issue in bbb-yocto repo: > >> > >https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3 > >> > > > >> > >I would appreciate any ideas or hints... Maybe some changes required > >> > >in local.conf ? > >> > > > >> > >You can all try it yourselves, and see the same! > >> > > > >> > >Thank you, > >> > >Zoran > >> > >_______ > >> > > >> > -- > >> > Sent from my Android device with K-9 Mail. Please excuse my brevity. > > -- > Sent from my Android device with K-9 Mail. Please excuse my brevity. ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-05-25 4:35 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-05-24 8:27 ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb Zoran 2021-05-24 12:24 ` [yocto] " Quentin Schulz 2021-05-24 14:09 ` Zoran 2021-05-24 14:13 ` Zoran 2021-05-24 19:27 ` Quentin Schulz 2021-05-25 4:35 ` Zoran
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.