* ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb
@ 2021-05-24 8:27 Zoran
2021-05-24 12:24 ` [yocto] " Quentin Schulz
0 siblings, 1 reply; 6+ messages in thread
From: Zoran @ 2021-05-24 8:27 UTC (permalink / raw)
To: Yocto-mailing-list; +Cc: Scott Ellis
Hello again to YOCTO Folks,
Here is another blunder I ran into while fixing a yocto-setup.sh script:
https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh
While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly.
I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and
approximately after:
Parsing recipes: 9% |##########
The following message pops up!
Loading cache: 100% |
| ETA: --:--:--
Loaded 0 entries from dependency cache.
ERROR: ParseError at
/home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4:
Could not include required file images/basic-dev-image.bb
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
If you peek into the following github repos:
https://github.com/jumpnow/meta-bbb
https://github.com/jumpnow/meta-jumpnow
You'll see that in later images/basic-dev-image.bb does exist, as
well as in the dunfell branch:
https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb
As well as in gatesgarth branch:
https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb
What I see upon the logic, something changes in poky/ setup, while
transitioning from dunfell to gatesgarth.
I also have created an issue in bbb-yocto repo:
https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3
I would appreciate any ideas or hints... Maybe some changes required
in local.conf ?
You can all try it yourselves, and see the same!
Thank you,
Zoran
_______
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [yocto] ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb
2021-05-24 8:27 ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb Zoran
@ 2021-05-24 12:24 ` Quentin Schulz
2021-05-24 14:09 ` Zoran
0 siblings, 1 reply; 6+ messages in thread
From: Quentin Schulz @ 2021-05-24 12:24 UTC (permalink / raw)
To: yocto, Zoran, Yocto-mailing-list; +Cc: Scott Ellis
Hi Zoran,
On May 24, 2021 8:27:58 AM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote:
>Hello again to YOCTO Folks,
>
>Here is another blunder I ran into while fixing a yocto-setup.sh script:
>https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh
>
>While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly.
>
>I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and
>approximately after:
>Parsing recipes: 9% |##########
>
>The following message pops up!
>Loading cache: 100% |
> | ETA: --:--:--
>Loaded 0 entries from dependency cache.
>ERROR: ParseError at
>/home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4:
>Could not include required file images/basic-dev-image.bb
>
>Summary: There was 1 WARNING message shown.
>Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>
The layer is not included. Check in your bblayers.conf. see https://github.com/ZoranStojsavljevic/bbb-yocto/blob/a6e8e8ce491705816d02df58fa0ef9378b18ef83/yocto-setup.sh#L114 where you are missing the gatesgarth check.
Cheers,
Quentin
>If you peek into the following github repos:
>https://github.com/jumpnow/meta-bbb
>https://github.com/jumpnow/meta-jumpnow
>
>You'll see that in later images/basic-dev-image.bb does exist, as
>well as in the dunfell branch:
>https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb
>
>As well as in gatesgarth branch:
>https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb
>
>What I see upon the logic, something changes in poky/ setup, while
>transitioning from dunfell to gatesgarth.
>
>I also have created an issue in bbb-yocto repo:
>https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3
>
>I would appreciate any ideas or hints... Maybe some changes required
>in local.conf ?
>
>You can all try it yourselves, and see the same!
>
>Thank you,
>Zoran
>_______
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [yocto] ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb
2021-05-24 12:24 ` [yocto] " Quentin Schulz
@ 2021-05-24 14:09 ` Zoran
2021-05-24 14:13 ` Zoran
0 siblings, 1 reply; 6+ messages in thread
From: Zoran @ 2021-05-24 14:09 UTC (permalink / raw)
To: Quentin Schulz; +Cc: Yocto-mailing-list, Scott Ellis
Hello Quentin,
Thank you for finding the bug. It was in front of my eyes (I print all
the layers at the end of setup, but I missed to compare bb-layers from
dunfell with bb-layers from gatesgarth).
I should do better. With regards to testing thinking. ;-)
_______
Now, there are other bugs (I should say, new features introduced).
Loading cache: 100%
|################################################################################################|
Time: 0:00:00
Loaded 3533 entries from dependency cache.
Parsing recipes: 100%
|##############################################################################################|
Time: 0:00:00
Parsing of 2311 .bb files complete (2309 cached, 2 parsed). 3535
targets, 121 skipped, 1 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
ERROR: Nothing RPROVIDES 'dhcp-libs' (but
/home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
RDEPENDS on or otherwise requires it)
NOTE: Runtime target 'dhcp-libs' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['dhcp-libs']
ERROR: Nothing RPROVIDES 'dhcp-server' (but
/home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
RDEPENDS on or otherwise requires it)
NOTE: Runtime target 'dhcp-server' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['dhcp-server']
ERROR: Nothing RPROVIDES 'dhcp-server-config' (but
/home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
RDEPENDS on or otherwise requires it)
NOTE: Runtime target 'dhcp-server-config' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['dhcp-server-config']
ERROR: Nothing RPROVIDES 'dhcp-client' (but
/home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
RDEPENDS on or otherwise requires it)
NOTE: Runtime target 'dhcp-client' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['dhcp-client']
ERROR: Nothing RPROVIDES 'dhcp-relay' (but
/home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
RDEPENDS on or otherwise requires it)
NOTE: Runtime target 'dhcp-relay' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['dhcp-relay']
ERROR: Nothing RPROVIDES 'dhcp-omshell' (but
/home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
RDEPENDS on or otherwise requires it)
NOTE: Runtime target 'dhcp-omshell' is unbuildable, removing...
Missing or unbuildable dependency chain was: ['dhcp-omshell']
Seems that this line in local.conf got severely changed, or most
likely the DHCP package version/handling got changed:
CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcp-libs dhcp-server
dhcp-server-config dhcp-client dhcp-relay dhcp-omshell cmake
libsocketcan nfs-utils rt-tests strace procps
packagegroup-core-buildessential "
The question is: what should I include in the
CORE_IMAGE_EXTRA_INSTALL_append for the DHCP package for gatesgarth
and later releases???
Thank you,
Zoran
_______
On Mon, May 24, 2021 at 2:24 PM Quentin Schulz <foss@0leil.net> wrote:
>
> Hi Zoran,
>
> On May 24, 2021 8:27:58 AM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote:
> >Hello again to YOCTO Folks,
> >
> >Here is another blunder I ran into while fixing a yocto-setup.sh script:
> >https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh
> >
> >While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly.
> >
> >I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and
> >approximately after:
> >Parsing recipes: 9% |##########
> >
> >The following message pops up!
> >Loading cache: 100% |
> > | ETA: --:--:--
> >Loaded 0 entries from dependency cache.
> >ERROR: ParseError at
> >/home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4:
> >Could not include required file images/basic-dev-image.bb
> >
> >Summary: There was 1 WARNING message shown.
> >Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> >
>
> The layer is not included. Check in your bblayers.conf. see https://github.com/ZoranStojsavljevic/bbb-yocto/blob/a6e8e8ce491705816d02df58fa0ef9378b18ef83/yocto-setup.sh#L114 where you are missing the gatesgarth check.
>
> Cheers,
> Quentin
>
>
> >If you peek into the following github repos:
> >https://github.com/jumpnow/meta-bbb
> >https://github.com/jumpnow/meta-jumpnow
> >
> >You'll see that in later images/basic-dev-image.bb does exist, as
> >well as in the dunfell branch:
> >https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb
> >
> >As well as in gatesgarth branch:
> >https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb
> >
> >What I see upon the logic, something changes in poky/ setup, while
> >transitioning from dunfell to gatesgarth.
> >
> >I also have created an issue in bbb-yocto repo:
> >https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3
> >
> >I would appreciate any ideas or hints... Maybe some changes required
> >in local.conf ?
> >
> >You can all try it yourselves, and see the same!
> >
> >Thank you,
> >Zoran
> >_______
>
> --
> Sent from my Android device with K-9 Mail. Please excuse my brevity.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [yocto] ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb
2021-05-24 14:09 ` Zoran
@ 2021-05-24 14:13 ` Zoran
2021-05-24 19:27 ` Quentin Schulz
0 siblings, 1 reply; 6+ messages in thread
From: Zoran @ 2021-05-24 14:13 UTC (permalink / raw)
To: Quentin Schulz; +Cc: Yocto-mailing-list, Scott Ellis
Or, maybe, now the DHCP is included in the releases by default?
Thank you,
Zoran
_______
On Mon, May 24, 2021 at 4:09 PM Zoran Stojsavljevic
<zoran.stojsavljevic@gmail.com> wrote:
>
> Hello Quentin,
>
> Thank you for finding the bug. It was in front of my eyes (I print all
> the layers at the end of setup, but I missed to compare bb-layers from
> dunfell with bb-layers from gatesgarth).
>
> I should do better. With regards to testing thinking. ;-)
> _______
>
> Now, there are other bugs (I should say, new features introduced).
>
> Loading cache: 100%
> |################################################################################################|
> Time: 0:00:00
> Loaded 3533 entries from dependency cache.
> Parsing recipes: 100%
> |##############################################################################################|
> Time: 0:00:00
> Parsing of 2311 .bb files complete (2309 cached, 2 parsed). 3535
> targets, 121 skipped, 1 masked, 0 errors.
> NOTE: Resolving any missing task queue dependencies
> ERROR: Nothing RPROVIDES 'dhcp-libs' (but
> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> RDEPENDS on or otherwise requires it)
> NOTE: Runtime target 'dhcp-libs' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['dhcp-libs']
> ERROR: Nothing RPROVIDES 'dhcp-server' (but
> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> RDEPENDS on or otherwise requires it)
> NOTE: Runtime target 'dhcp-server' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['dhcp-server']
> ERROR: Nothing RPROVIDES 'dhcp-server-config' (but
> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> RDEPENDS on or otherwise requires it)
> NOTE: Runtime target 'dhcp-server-config' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['dhcp-server-config']
> ERROR: Nothing RPROVIDES 'dhcp-client' (but
> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> RDEPENDS on or otherwise requires it)
> NOTE: Runtime target 'dhcp-client' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['dhcp-client']
> ERROR: Nothing RPROVIDES 'dhcp-relay' (but
> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> RDEPENDS on or otherwise requires it)
> NOTE: Runtime target 'dhcp-relay' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['dhcp-relay']
> ERROR: Nothing RPROVIDES 'dhcp-omshell' (but
> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> RDEPENDS on or otherwise requires it)
> NOTE: Runtime target 'dhcp-omshell' is unbuildable, removing...
> Missing or unbuildable dependency chain was: ['dhcp-omshell']
>
> Seems that this line in local.conf got severely changed, or most
> likely the DHCP package version/handling got changed:
>
> CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcp-libs dhcp-server
> dhcp-server-config dhcp-client dhcp-relay dhcp-omshell cmake
> libsocketcan nfs-utils rt-tests strace procps
> packagegroup-core-buildessential "
>
> The question is: what should I include in the
> CORE_IMAGE_EXTRA_INSTALL_append for the DHCP package for gatesgarth
> and later releases???
>
> Thank you,
> Zoran
> _______
>
> On Mon, May 24, 2021 at 2:24 PM Quentin Schulz <foss@0leil.net> wrote:
> >
> > Hi Zoran,
> >
> > On May 24, 2021 8:27:58 AM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote:
> > >Hello again to YOCTO Folks,
> > >
> > >Here is another blunder I ran into while fixing a yocto-setup.sh script:
> > >https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh
> > >
> > >While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly.
> > >
> > >I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and
> > >approximately after:
> > >Parsing recipes: 9% |##########
> > >
> > >The following message pops up!
> > >Loading cache: 100% |
> > > | ETA: --:--:--
> > >Loaded 0 entries from dependency cache.
> > >ERROR: ParseError at
> > >/home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4:
> > >Could not include required file images/basic-dev-image.bb
> > >
> > >Summary: There was 1 WARNING message shown.
> > >Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> > >
> >
> > The layer is not included. Check in your bblayers.conf. see https://github.com/ZoranStojsavljevic/bbb-yocto/blob/a6e8e8ce491705816d02df58fa0ef9378b18ef83/yocto-setup.sh#L114 where you are missing the gatesgarth check.
> >
> > Cheers,
> > Quentin
> >
> >
> > >If you peek into the following github repos:
> > >https://github.com/jumpnow/meta-bbb
> > >https://github.com/jumpnow/meta-jumpnow
> > >
> > >You'll see that in later images/basic-dev-image.bb does exist, as
> > >well as in the dunfell branch:
> > >https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb
> > >
> > >As well as in gatesgarth branch:
> > >https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb
> > >
> > >What I see upon the logic, something changes in poky/ setup, while
> > >transitioning from dunfell to gatesgarth.
> > >
> > >I also have created an issue in bbb-yocto repo:
> > >https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3
> > >
> > >I would appreciate any ideas or hints... Maybe some changes required
> > >in local.conf ?
> > >
> > >You can all try it yourselves, and see the same!
> > >
> > >Thank you,
> > >Zoran
> > >_______
> >
> > --
> > Sent from my Android device with K-9 Mail. Please excuse my brevity.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [yocto] ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb
2021-05-24 14:13 ` Zoran
@ 2021-05-24 19:27 ` Quentin Schulz
2021-05-25 4:35 ` Zoran
0 siblings, 1 reply; 6+ messages in thread
From: Quentin Schulz @ 2021-05-24 19:27 UTC (permalink / raw)
To: yocto, Zoran; +Cc: Yocto-mailing-list, Scott Ellis
On May 24, 2021 2:13:57 PM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote:
>Or, maybe, now the DHCP is included in the releases by default?
>
>Thank you,
>Zoran
>_______
>
>On Mon, May 24, 2021 at 4:09 PM Zoran Stojsavljevic
><zoran.stojsavljevic@gmail.com> wrote:
>>
>> Hello Quentin,
>>
>> Thank you for finding the bug. It was in front of my eyes (I print all
>> the layers at the end of setup, but I missed to compare bb-layers from
>> dunfell with bb-layers from gatesgarth).
>>
>> I should do better. With regards to testing thinking. ;-)
>> _______
>>
>> Now, there are other bugs (I should say, new features introduced).
>>
>> Loading cache: 100%
>> |################################################################################################|
>> Time: 0:00:00
>> Loaded 3533 entries from dependency cache.
>> Parsing recipes: 100%
>> |##############################################################################################|
>> Time: 0:00:00
>> Parsing of 2311 .bb files complete (2309 cached, 2 parsed). 3535
>> targets, 121 skipped, 1 masked, 0 errors.
>> NOTE: Resolving any missing task queue dependencies
>> ERROR: Nothing RPROVIDES 'dhcp-libs' (but
>> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
>> RDEPENDS on or otherwise requires it)
>> NOTE: Runtime target 'dhcp-libs' is unbuildable, removing...
>> Missing or unbuildable dependency chain was: ['dhcp-libs']
>> ERROR: Nothing RPROVIDES 'dhcp-server' (but
>> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
>> RDEPENDS on or otherwise requires it)
>> NOTE: Runtime target 'dhcp-server' is unbuildable, removing...
>> Missing or unbuildable dependency chain was: ['dhcp-server']
>> ERROR: Nothing RPROVIDES 'dhcp-server-config' (but
>> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
>> RDEPENDS on or otherwise requires it)
>> NOTE: Runtime target 'dhcp-server-config' is unbuildable, removing...
>> Missing or unbuildable dependency chain was: ['dhcp-server-config']
>> ERROR: Nothing RPROVIDES 'dhcp-client' (but
>> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
>> RDEPENDS on or otherwise requires it)
>> NOTE: Runtime target 'dhcp-client' is unbuildable, removing...
>> Missing or unbuildable dependency chain was: ['dhcp-client']
>> ERROR: Nothing RPROVIDES 'dhcp-relay' (but
>> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
>> RDEPENDS on or otherwise requires it)
>> NOTE: Runtime target 'dhcp-relay' is unbuildable, removing...
>> Missing or unbuildable dependency chain was: ['dhcp-relay']
>> ERROR: Nothing RPROVIDES 'dhcp-omshell' (but
>> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
>> RDEPENDS on or otherwise requires it)
>> NOTE: Runtime target 'dhcp-omshell' is unbuildable, removing...
>> Missing or unbuildable dependency chain was: ['dhcp-omshell']
>>
>> Seems that this line in local.conf got severely changed, or most
>> likely the DHCP package version/handling got changed:
>>
>> CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcp-libs dhcp-server
>> dhcp-server-config dhcp-client dhcp-relay dhcp-omshell cmake
>> libsocketcan nfs-utils rt-tests strace procps
>> packagegroup-core-buildessential "
>>
>> The question is: what should I include in the
>> CORE_IMAGE_EXTRA_INSTALL_append for the DHCP package for gatesgarth
>> and later releases???
>>
If I remember correctly, dhcp-server has been replaced by kea, check on that side maybe. Read the migration notes, pretty sure the kea thing is listed there.
Cheers,
Quentin
>> Thank you,
>> Zoran
>> _______
>>
>> On Mon, May 24, 2021 at 2:24 PM Quentin Schulz <foss@0leil.net> wrote:
>> >
>> > Hi Zoran,
>> >
>> > On May 24, 2021 8:27:58 AM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote:
>> > >Hello again to YOCTO Folks,
>> > >
>> > >Here is another blunder I ran into while fixing a yocto-setup.sh script:
>> > >https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh
>> > >
>> > >While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly.
>> > >
>> > >I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and
>> > >approximately after:
>> > >Parsing recipes: 9% |##########
>> > >
>> > >The following message pops up!
>> > >Loading cache: 100% |
>> > > | ETA: --:--:--
>> > >Loaded 0 entries from dependency cache.
>> > >ERROR: ParseError at
>> > >/home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4:
>> > >Could not include required file images/basic-dev-image.bb
>> > >
>> > >Summary: There was 1 WARNING message shown.
>> > >Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>> > >
>> >
>> > The layer is not included. Check in your bblayers.conf. see https://github.com/ZoranStojsavljevic/bbb-yocto/blob/a6e8e8ce491705816d02df58fa0ef9378b18ef83/yocto-setup.sh#L114 where you are missing the gatesgarth check.
>> >
>> > Cheers,
>> > Quentin
>> >
>> >
>> > >If you peek into the following github repos:
>> > >https://github.com/jumpnow/meta-bbb
>> > >https://github.com/jumpnow/meta-jumpnow
>> > >
>> > >You'll see that in later images/basic-dev-image.bb does exist, as
>> > >well as in the dunfell branch:
>> > >https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb
>> > >
>> > >As well as in gatesgarth branch:
>> > >https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb
>> > >
>> > >What I see upon the logic, something changes in poky/ setup, while
>> > >transitioning from dunfell to gatesgarth.
>> > >
>> > >I also have created an issue in bbb-yocto repo:
>> > >https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3
>> > >
>> > >I would appreciate any ideas or hints... Maybe some changes required
>> > >in local.conf ?
>> > >
>> > >You can all try it yourselves, and see the same!
>> > >
>> > >Thank you,
>> > >Zoran
>> > >_______
>> >
>> > --
>> > Sent from my Android device with K-9 Mail. Please excuse my brevity.
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [yocto] ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb
2021-05-24 19:27 ` Quentin Schulz
@ 2021-05-25 4:35 ` Zoran
0 siblings, 0 replies; 6+ messages in thread
From: Zoran @ 2021-05-25 4:35 UTC (permalink / raw)
To: Quentin Schulz; +Cc: Yocto-mailing-list, Scott Ellis
> IIRC, dhcp-server has been replaced by kea, check on that side maybe.
> Read the migration notes, pretty sure the kea thing is listed there.
Done. All fixed according to Quentin's recommendations.
https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh#L114
https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/bbb-releases/bbb-gatesgarth/local.conf#L18
https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/bbb-releases/bbb-gatesgarth/local.conf_kernel#L26
Added to README.md .
https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/README.md
Thank you,
Zoran
_______
On Mon, May 24, 2021 at 9:27 PM Quentin Schulz <foss@0leil.net> wrote:
>
>
>
> On May 24, 2021 2:13:57 PM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote:
> >Or, maybe, now the DHCP is included in the releases by default?
> >
> >Thank you,
> >Zoran
> >_______
> >
> >On Mon, May 24, 2021 at 4:09 PM Zoran Stojsavljevic
> ><zoran.stojsavljevic@gmail.com> wrote:
> >>
> >> Hello Quentin,
> >>
> >> Thank you for finding the bug. It was in front of my eyes (I print all
> >> the layers at the end of setup, but I missed to compare bb-layers from
> >> dunfell with bb-layers from gatesgarth).
> >>
> >> I should do better. With regards to testing thinking. ;-)
> >> _______
> >>
> >> Now, there are other bugs (I should say, new features introduced).
> >>
> >> Loading cache: 100%
> >> |################################################################################################|
> >> Time: 0:00:00
> >> Loaded 3533 entries from dependency cache.
> >> Parsing recipes: 100%
> >> |##############################################################################################|
> >> Time: 0:00:00
> >> Parsing of 2311 .bb files complete (2309 cached, 2 parsed). 3535
> >> targets, 121 skipped, 1 masked, 0 errors.
> >> NOTE: Resolving any missing task queue dependencies
> >> ERROR: Nothing RPROVIDES 'dhcp-libs' (but
> >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> >> RDEPENDS on or otherwise requires it)
> >> NOTE: Runtime target 'dhcp-libs' is unbuildable, removing...
> >> Missing or unbuildable dependency chain was: ['dhcp-libs']
> >> ERROR: Nothing RPROVIDES 'dhcp-server' (but
> >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> >> RDEPENDS on or otherwise requires it)
> >> NOTE: Runtime target 'dhcp-server' is unbuildable, removing...
> >> Missing or unbuildable dependency chain was: ['dhcp-server']
> >> ERROR: Nothing RPROVIDES 'dhcp-server-config' (but
> >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> >> RDEPENDS on or otherwise requires it)
> >> NOTE: Runtime target 'dhcp-server-config' is unbuildable, removing...
> >> Missing or unbuildable dependency chain was: ['dhcp-server-config']
> >> ERROR: Nothing RPROVIDES 'dhcp-client' (but
> >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> >> RDEPENDS on or otherwise requires it)
> >> NOTE: Runtime target 'dhcp-client' is unbuildable, removing...
> >> Missing or unbuildable dependency chain was: ['dhcp-client']
> >> ERROR: Nothing RPROVIDES 'dhcp-relay' (but
> >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> >> RDEPENDS on or otherwise requires it)
> >> NOTE: Runtime target 'dhcp-relay' is unbuildable, removing...
> >> Missing or unbuildable dependency chain was: ['dhcp-relay']
> >> ERROR: Nothing RPROVIDES 'dhcp-omshell' (but
> >> /home/vuser/projects_yocto/bbb-yocto-gatesgarth/poky/meta/recipes-core/images/core-image-minimal.bb
> >> RDEPENDS on or otherwise requires it)
> >> NOTE: Runtime target 'dhcp-omshell' is unbuildable, removing...
> >> Missing or unbuildable dependency chain was: ['dhcp-omshell']
> >>
> >> Seems that this line in local.conf got severely changed, or most
> >> likely the DHCP package version/handling got changed:
> >>
> >> CORE_IMAGE_EXTRA_INSTALL_append = "openssh dhcp-libs dhcp-server
> >> dhcp-server-config dhcp-client dhcp-relay dhcp-omshell cmake
> >> libsocketcan nfs-utils rt-tests strace procps
> >> packagegroup-core-buildessential "
> >>
> >> The question is: what should I include in the
> >> CORE_IMAGE_EXTRA_INSTALL_append for the DHCP package for gatesgarth
> >> and later releases???
> >>
>
> If I remember correctly, dhcp-server has been replaced by kea, check on that side maybe. Read the migration notes, pretty sure the kea thing is listed there.
>
> Cheers,
> Quentin
>
> >> Thank you,
> >> Zoran
> >> _______
> >>
> >> On Mon, May 24, 2021 at 2:24 PM Quentin Schulz <foss@0leil.net> wrote:
> >> >
> >> > Hi Zoran,
> >> >
> >> > On May 24, 2021 8:27:58 AM UTC, Zoran <zoran.stojsavljevic@gmail.com> wrote:
> >> > >Hello again to YOCTO Folks,
> >> > >
> >> > >Here is another blunder I ran into while fixing a yocto-setup.sh script:
> >> > >https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/yocto-setup.sh
> >> > >
> >> > >While executing $ . ./yocto-setup.sh dunfell, everything ran smoothly.
> >> > >
> >> > >I did the same routine with the $ . ./yocto-setup.sh gatesgarth, and
> >> > >approximately after:
> >> > >Parsing recipes: 9% |##########
> >> > >
> >> > >The following message pops up!
> >> > >Loading cache: 100% |
> >> > > | ETA: --:--:--
> >> > >Loaded 0 entries from dependency cache.
> >> > >ERROR: ParseError at
> >> > >/home/vuser/projects_yocto/bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4:
> >> > >Could not include required file images/basic-dev-image.bb
> >> > >
> >> > >Summary: There was 1 WARNING message shown.
> >> > >Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> >> > >
> >> >
> >> > The layer is not included. Check in your bblayers.conf. see https://github.com/ZoranStojsavljevic/bbb-yocto/blob/a6e8e8ce491705816d02df58fa0ef9378b18ef83/yocto-setup.sh#L114 where you are missing the gatesgarth check.
> >> >
> >> > Cheers,
> >> > Quentin
> >> >
> >> >
> >> > >If you peek into the following github repos:
> >> > >https://github.com/jumpnow/meta-bbb
> >> > >https://github.com/jumpnow/meta-jumpnow
> >> > >
> >> > >You'll see that in later images/basic-dev-image.bb does exist, as
> >> > >well as in the dunfell branch:
> >> > >https://github.com/jumpnow/meta-jumpnow/blob/zeus/images/basic-dev-image.bb
> >> > >
> >> > >As well as in gatesgarth branch:
> >> > >https://github.com/jumpnow/meta-jumpnow/blob/gatesgarth/images/basic-dev-image.bb
> >> > >
> >> > >What I see upon the logic, something changes in poky/ setup, while
> >> > >transitioning from dunfell to gatesgarth.
> >> > >
> >> > >I also have created an issue in bbb-yocto repo:
> >> > >https://github.com/ZoranStojsavljevic/bbb-yocto/issues/3
> >> > >
> >> > >I would appreciate any ideas or hints... Maybe some changes required
> >> > >in local.conf ?
> >> > >
> >> > >You can all try it yourselves, and see the same!
> >> > >
> >> > >Thank you,
> >> > >Zoran
> >> > >_______
> >> >
> >> > --
> >> > Sent from my Android device with K-9 Mail. Please excuse my brevity.
>
> --
> Sent from my Android device with K-9 Mail. Please excuse my brevity.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-05-25 4:35 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-24 8:27 ERROR: ParseError at .../bbb-yocto-gatesgarth/meta-bbb/images/console-image.bb:4: Could not include required file images/basic-dev-image.bb Zoran
2021-05-24 12:24 ` [yocto] " Quentin Schulz
2021-05-24 14:09 ` Zoran
2021-05-24 14:13 ` Zoran
2021-05-24 19:27 ` Quentin Schulz
2021-05-25 4:35 ` Zoran
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.