All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vimal Singh <vimal.newwork@gmail.com>
To: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: linux-omap@vger.kernel.org, linux-mtd@lists.infradead.org,
	bdefaria@adeneo-embedded.com
Subject: Re: [PATCH] omap : nand : fix subpage ecc issue with prefetch
Date: Thu, 5 May 2011 19:50:40 +0530	[thread overview]
Message-ID: <BANLkTimfXSOTKPpxFG8+JpCxvpzd14aBOQ@mail.gmail.com> (raw)
In-Reply-To: <1304334638-2198-1-git-send-email-kishore.kadiyala@ti.com>

Hi Artem,

Can you please give a look on this patch?
This patch fixes is required for anyone who wants to use this driver
without using HW ECC.

-- Vimal

On Mon, May 2, 2011 at 4:40 PM, Kishore Kadiyala
<kishore.kadiyala@ti.com> wrote:
> For prefetch engine, read and write  got broken in commit '2c01946c'.
> We never hit a scenario of not getting 'gpmc_prefetch_enable'
> call success.
> When reading/writing a subpage with a non divisible by 4 ecc number
> of bytes, the mis-aligned bytes gets handled first before enabling
> the Prefetch engine, then it reads/writes rest of the bytes.
>
> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
> Signed-off-by: Vimal Singh <vimal.newwork@gmail.com>
> Reported-by: Bryan DE FARIA <bdefaria@adeneo-embedded.com>
> ---
>  drivers/mtd/nand/omap2.c |   12 +++++-------
>  1 files changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index da9a351..2c8040f 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -263,11 +263,10 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
>        if (ret) {
>                /* PFPW engine is busy, use cpu copy method */
>                if (info->nand.options & NAND_BUSWIDTH_16)
> -                       omap_read_buf16(mtd, buf, len);
> +                       omap_read_buf16(mtd, (u_char *)p, len);
>                else
> -                       omap_read_buf8(mtd, buf, len);
> +                       omap_read_buf8(mtd, (u_char *)p, len);
>        } else {
> -               p = (u32 *) buf;
>                do {
>                        r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
>                        r_count = r_count >> 2;
> @@ -293,7 +292,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
>                                                struct omap_nand_info, mtd);
>        uint32_t w_count = 0;
>        int i = 0, ret = 0;
> -       u16 *p;
> +       u16 *p = (u16 *)buf;
>        unsigned long tim, limit;
>
>        /* take care of subpage writes */
> @@ -309,11 +308,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
>        if (ret) {
>                /* PFPW engine is busy, use cpu copy method */
>                if (info->nand.options & NAND_BUSWIDTH_16)
> -                       omap_write_buf16(mtd, buf, len);
> +                       omap_write_buf16(mtd, (u_char *)p, len);
>                else
> -                       omap_write_buf8(mtd, buf, len);
> +                       omap_write_buf8(mtd, (u_char *)p, len);
>        } else {
> -               p = (u16 *) buf;
>                while (len) {
>                        w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
>                        w_count = w_count >> 1;
> --
> 1.7.4.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Vimal Singh <vimal.newwork@gmail.com>
To: Kishore Kadiyala <kishore.kadiyala@ti.com>
Cc: bdefaria@adeneo-embedded.com, linux-omap@vger.kernel.org,
	linux-mtd@lists.infradead.org
Subject: Re: [PATCH] omap : nand : fix subpage ecc issue with prefetch
Date: Thu, 5 May 2011 19:50:40 +0530	[thread overview]
Message-ID: <BANLkTimfXSOTKPpxFG8+JpCxvpzd14aBOQ@mail.gmail.com> (raw)
In-Reply-To: <1304334638-2198-1-git-send-email-kishore.kadiyala@ti.com>

Hi Artem,

Can you please give a look on this patch?
This patch fixes is required for anyone who wants to use this driver
without using HW ECC.

-- Vimal

On Mon, May 2, 2011 at 4:40 PM, Kishore Kadiyala
<kishore.kadiyala@ti.com> wrote:
> For prefetch engine, read and write  got broken in commit '2c01946c'.
> We never hit a scenario of not getting 'gpmc_prefetch_enable'
> call success.
> When reading/writing a subpage with a non divisible by 4 ecc number
> of bytes, the mis-aligned bytes gets handled first before enabling
> the Prefetch engine, then it reads/writes rest of the bytes.
>
> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
> Signed-off-by: Vimal Singh <vimal.newwork@gmail.com>
> Reported-by: Bryan DE FARIA <bdefaria@adeneo-embedded.com>
> ---
>  drivers/mtd/nand/omap2.c |   12 +++++-------
>  1 files changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
> index da9a351..2c8040f 100644
> --- a/drivers/mtd/nand/omap2.c
> +++ b/drivers/mtd/nand/omap2.c
> @@ -263,11 +263,10 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
>        if (ret) {
>                /* PFPW engine is busy, use cpu copy method */
>                if (info->nand.options & NAND_BUSWIDTH_16)
> -                       omap_read_buf16(mtd, buf, len);
> +                       omap_read_buf16(mtd, (u_char *)p, len);
>                else
> -                       omap_read_buf8(mtd, buf, len);
> +                       omap_read_buf8(mtd, (u_char *)p, len);
>        } else {
> -               p = (u32 *) buf;
>                do {
>                        r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
>                        r_count = r_count >> 2;
> @@ -293,7 +292,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
>                                                struct omap_nand_info, mtd);
>        uint32_t w_count = 0;
>        int i = 0, ret = 0;
> -       u16 *p;
> +       u16 *p = (u16 *)buf;
>        unsigned long tim, limit;
>
>        /* take care of subpage writes */
> @@ -309,11 +308,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
>        if (ret) {
>                /* PFPW engine is busy, use cpu copy method */
>                if (info->nand.options & NAND_BUSWIDTH_16)
> -                       omap_write_buf16(mtd, buf, len);
> +                       omap_write_buf16(mtd, (u_char *)p, len);
>                else
> -                       omap_write_buf8(mtd, buf, len);
> +                       omap_write_buf8(mtd, (u_char *)p, len);
>        } else {
> -               p = (u16 *) buf;
>                while (len) {
>                        w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
>                        w_count = w_count >> 1;
> --
> 1.7.4.1
>
>

  reply	other threads:[~2011-05-05 14:40 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-02 11:10 [PATCH] omap : nand : fix subpage ecc issue with prefetch Kishore Kadiyala
2011-05-02 11:10 ` Kishore Kadiyala
2011-05-05 14:20 ` Vimal Singh [this message]
2011-05-05 14:20   ` Vimal Singh
2011-05-05 18:48 ` Artem Bityutskiy
2011-05-05 18:48   ` Artem Bityutskiy
2011-05-06  7:30   ` Vimal Singh
2011-05-06  7:30     ` Vimal Singh
2011-05-06 18:56     ` Artem Bityutskiy
2011-05-06 18:56       ` Artem Bityutskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BANLkTimfXSOTKPpxFG8+JpCxvpzd14aBOQ@mail.gmail.com \
    --to=vimal.newwork@gmail.com \
    --cc=bdefaria@adeneo-embedded.com \
    --cc=kishore.kadiyala@ti.com \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.