All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paulo Zanoni <przanoni@gmail.com>
To: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
	Paulo Zanoni <paulo.r.zanoni@intel.com>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: Re: [PATCH 2/2] drm/i915: Fix DEIER and GTIER collecting for BDW.
Date: Wed, 30 Jul 2014 15:28:20 -0300	[thread overview]
Message-ID: <CA+gsUGRSkbgSwmn_dtadTcxT_4+efVU04=QaRMQ8-4-uL9KC3Q@mail.gmail.com> (raw)
In-Reply-To: <CABVU7+uuaKjGjUf0H08=3c1JHtXDv--E6MUTPtgZSSK2Zo90Yw@mail.gmail.com>

2014-07-30 15:20 GMT-03:00 Rodrigo Vivi <rodrigo.vivi@gmail.com>:
>
>
>
> On Wed, Jul 30, 2014 at 11:09 AM, Paulo Zanoni <przanoni@gmail.com> wrote:
>>
>> 2014-07-28 12:19 GMT-03:00 Rodrigo Vivi <rodrigo.vivi@intel.com>:
>> > BDW has many other Display Engine interrupts and GT interrupts
>> > registers.
>> > Collecting it properly on gpu_error_state.
>> >
>> > On debugfs all was properly listed already but besides we were also
>> > listing old
>> > DEIER and GTIER that doesn't exist on BDW anymore. This was causing
>> > unclaimed register messages:
>> >
>> > https://bugs.freedesktop.org/show_bug.cgi?id=81701
>> >
>> > Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
>> > Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
>> > ---
>> >  drivers/gpu/drm/i915/i915_debugfs.c   |  2 +-
>> >  drivers/gpu/drm/i915/i915_drv.h       |  4 +++-
>> >  drivers/gpu/drm/i915/i915_gpu_error.c | 23 ++++++++++++++++++++---
>> >  3 files changed, 24 insertions(+), 5 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
>> > b/drivers/gpu/drm/i915/i915_debugfs.c
>> > index 9e737b7..679cda6 100644
>> > --- a/drivers/gpu/drm/i915/i915_debugfs.c
>> > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
>> > @@ -783,7 +783,7 @@ static int i915_interrupt_info(struct seq_file *m,
>> > void *data)
>> >                         seq_printf(m, "Pipe %c stat:         %08x\n",
>> >                                    pipe_name(pipe),
>> >                                    I915_READ(PIPESTAT(pipe)));
>> > -       } else {
>> > +       } else if (!IS_BROADWELL(dev)) {
>> >                 seq_printf(m, "North Display Interrupt enable:
>> > %08x\n",
>> >                            I915_READ(DEIER));
>> >                 seq_printf(m, "North Display Interrupt identity:
>> > %08x\n",
>>
>> This chunk is not needed since we already have a check for "gen >= 8"
>> at the top.
>
>
> oh, for a moment I thought it was messy as the other code and it was writing
> twice...
> mainly when you mentioned that you could reproduce the unclaimed when
> reading debugfs...
> but probably was related to the powerwell you mentioned below...

Yes, at i915_interrupt_info we also need to call intel_display_power_enabled().

I also won't complain if you fix i915_frequency_info on BDW :)

>
>>
>>
>>
>> > diff --git a/drivers/gpu/drm/i915/i915_drv.h
>> > b/drivers/gpu/drm/i915/i915_drv.h
>> > index ccb97f1..ee28cd7 100644
>> > --- a/drivers/gpu/drm/i915/i915_drv.h
>> > +++ b/drivers/gpu/drm/i915/i915_drv.h
>> > @@ -314,7 +314,9 @@ struct drm_i915_error_state {
>> >         u32 eir;
>> >         u32 pgtbl_er;
>> >         u32 ier;
>> > -       u32 gtier;
>> > +       u32 gtier[4];
>> > +       u32 deier[3];
>> > +       u32 de_misc_ier;
>> >         u32 ccid;
>> >         u32 derrmr;
>> >         u32 forcewake;
>> > diff --git a/drivers/gpu/drm/i915/i915_gpu_error.c
>> > b/drivers/gpu/drm/i915/i915_gpu_error.c
>> > index 372fea3..f865d1d 100644
>> > --- a/drivers/gpu/drm/i915/i915_gpu_error.c
>> > +++ b/drivers/gpu/drm/i915/i915_gpu_error.c
>> > @@ -358,9 +358,19 @@ int i915_error_state_to_str(struct
>> > drm_i915_error_state_buf *m,
>> >         err_printf(m, "Suspend count: %u\n", error->suspend_count);
>> >         err_printf(m, "PCI ID: 0x%04x\n", dev->pdev->device);
>> >         err_printf(m, "EIR: 0x%08x\n", error->eir);
>> > -       err_printf(m, "IER: 0x%08x\n", error->ier);
>> > +       if (IS_BROADWELL(dev)) {
>> > +               for_each_pipe(i)
>> > +                       err_printf(m, "DEIER pipe %c: 0x%08x\n",
>> > pipe_name(i),
>> > +                                  error->deier[i]);
>> > +               for (i = 0; i < 4; i++)
>> > +                       err_printf(m, "GTIER gt %d: 0x%08x\n", i,
>> > +                                  error->gtier[i]);
>> > +               err_printf(m, "DE_MISC_IER: 0x%08x\n",
>> > error->de_misc_ier);
>> > +       } else {
>> > +               err_printf(m, "IER: 0x%08x\n", error->ier);
>> > +       }
>> >         if (IS_HASWELL(dev))
>> > -               err_printf(m, "GTIER: 0x%08x\n", error->gtier);
>> > +               err_printf(m, "GTIER: 0x%08x\n", error->gtier[0]);
>> >         err_printf(m, "PGTBL_ER: 0x%08x\n", error->pgtbl_er);
>> >         err_printf(m, "FORCEWAKE: 0x%08x\n", error->forcewake);
>> >         err_printf(m, "DERRMR: 0x%08x\n", error->derrmr);
>> > @@ -1093,6 +1103,7 @@ static void i915_capture_reg_state(struct
>> > drm_i915_private *dev_priv,
>> >                                    struct drm_i915_error_state *error)
>> >  {
>> >         struct drm_device *dev = dev_priv->dev;
>> > +       int i;
>> >
>> >         /* General organization
>> >          * 1. Registers specific to a single generation
>> > @@ -1139,7 +1150,13 @@ static void i915_capture_reg_state(struct
>> > drm_i915_private *dev_priv,
>> >
>> >         if (IS_HASWELL(dev)) {
>> >                 error->ier = I915_READ(DEIER);
>> > -               error->gtier = I915_READ(GTIER);
>> > +               error->gtier[0] = I915_READ(GTIER);
>> > +       } else if (IS_BROADWELL(dev)) {
>> > +               for_each_pipe(i)
>> > +                       error->deier[i] =
>> > I915_READ(GEN8_DE_PIPE_IER(i));
>>
>> for_each_pipe(i)
>>         if (intel_display_power_enabled(dev_priv, POWER_DOMAIN_PIPE(i)))
>>             error->deier[i] = I915_READ(GEN8_DE_PIPE_IER(i));
>>
>> If the pipe's power well is disabled, the IER register is powered off
>> and we can get an unclaimed register errors too.
>
>
> thanks! I'll add it...
> Also also need to be added to debugfs interface.
>
>>
>>
>> I also just noticed that this function contains the "/* 4: Everything
>> else */" comment twice. You could remove one :)
>
>
> indeed.
>
>
>>
>>
>>
>> > +               for (i = 0; i < 4; i++)
>> > +                       error->gtier[3] = I915_READ(GEN8_GT_IER(i));
>> > +               error->de_misc_ier = I915_READ(GEN8_DE_MISC_IER);
>> >         } else if (HAS_PCH_SPLIT(dev)) {
>> >                 error->ier = I915_READ(DEIER) | I915_READ(GTIER);
>> >         } else if (IS_GEN2(dev)) {
>> > --
>> > 1.9.3
>> >
>> > _______________________________________________
>> > Intel-gfx mailing list
>> > Intel-gfx@lists.freedesktop.org
>> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>>
>>
>>
>> --
>> Paulo Zanoni
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>
>
>
> --
> Rodrigo Vivi
> Blog: http://blog.vivi.eng.br
>



-- 
Paulo Zanoni

  reply	other threads:[~2014-07-30 18:28 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-28 15:19 [PATCH 1/2] drm/i915: Collect gtier properly on HSW Rodrigo Vivi
2014-07-28 15:19 ` [PATCH 2/2] drm/i915: Fix DEIER and GTIER collecting for BDW Rodrigo Vivi
2014-07-30 18:09   ` Paulo Zanoni
2014-07-30 18:20     ` Rodrigo Vivi
2014-07-30 18:28       ` Paulo Zanoni [this message]
2014-08-01  9:14         ` Rodrigo Vivi
2014-08-01 18:11           ` Paulo Zanoni
2014-08-01 16:13             ` Rodrigo Vivi
2014-08-04 14:44               ` Paulo Zanoni
2014-08-04 14:56                 ` Daniel Vetter
2014-08-05 16:39                   ` [PATCH] " Rodrigo Vivi
2014-08-05 17:07                     ` Rodrigo Vivi
2014-08-06  7:51                       ` Daniel Vetter
2014-07-30 17:53 ` [PATCH 1/2] drm/i915: Collect gtier properly on HSW Paulo Zanoni
2014-07-30 18:17   ` Rodrigo Vivi
2014-08-01  9:13     ` Rodrigo Vivi
2014-08-01 17:58       ` Paulo Zanoni
2014-08-01 16:12         ` Rodrigo Vivi
2014-08-04 14:37           ` Paulo Zanoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CA+gsUGRSkbgSwmn_dtadTcxT_4+efVU04=QaRMQ8-4-uL9KC3Q@mail.gmail.com' \
    --to=przanoni@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    --cc=rodrigo.vivi@gmail.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.