* [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
@ 2022-06-16 0:52 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson
Cc: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski,
Jonathan Neuschäfer, Linus Walleij, Benoît Cousson,
Tony Lindgren, Andrew Lunn, Gregory Clement,
Sebastian Hesselbarth, Russell King, Joel Stanley,
Andrew Jeffery, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea,
Peter Rosin, Matthias Brugger, Andy Gross, Bjorn Andersson,
Heiko Stuebner, Thierry Reding, Jonathan Hunter, Michal Simek,
Khuong Dinh, Shawn Guo, Li Yang, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, Wei Xu,
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, linux-input,
devicetree, linux-kernel, openbmc, linux-gpio, linux-omap,
linux-arm-kernel, linux-aspeed, linux-mediatek, linux-arm-msm,
linux-rockchip, linux-tegra, Krzysztof Kozlowski
Hi,
Merging
=======
1. dt-bindings: rebased on top of Rob's:
https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
2. DTS patches are independent. They can be picked up directly by sub-arch
maintainers, by Arnd or Olof, or eventually by me (if you wish).
Changes since v2
================
1. Few node renamings according to comments (at91, rockchip, nuvoton,wpcm450-pinctrl.yaml).
2. Add Rb tags.
3. Drop applied patches: allwinner, amlogic, broadcom and samsung.
Changes since v1
================
Patch 1: Extend gpio-keys nodes pattern to cover buttons, events and switches (Jeff).
Patch 2: Include input.yaml (Dmitry, Rob).
Patch 3: New patch.
New DTS patches.
Best regards,
Krzysztof
Krzysztof Kozlowski (40):
dt-bindings: input: gpio-keys: enforce node names to match all
properties
dt-bindings: input: gpio-keys: reference input.yaml and document
properties
dt-bindings: input: gpio-keys: accept also interrupt-extended
dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
arm64: dts: apm: correct gpio-keys properties
arm64: dts: broadcom: align gpio-key node names with dtschema
arm64: dts: freescale: align gpio-key node names with dtschema
arm64: dts: freescale: align led node names with dtschema
arm64: dts: hisilicon: align gpio-key node names with dtschema
arm64: dts: hisilicon: correct gpio-keys properties
arm64: dts: marvell: align gpio-key node names with dtschema
arm64: dts: marvell: armada-3720: align lednode names with dtschema
ARM: dts: marvell: align gpio-key node names with dtschema
ARM: dts: marvell: correct gpio-keys properties
arm64: dts: mediatek: align gpio-key node names with dtschema
arm64: dts: mediatek: mt7622-bananapi-bpi-r64: align led node names
with dtschema
arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties
ARM: dts: mediatek: align gpio-key node names with dtschema
arm64: dts: tegra: align gpio-key node names with dtschema
ARM: dts: tegra: align gpio-key node names with dtschema
arm64: dts: qcom: align gpio-key node names with dtschema
arm64: dts: qcom: correct gpio-keys properties
arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from
gpio-keys
arm64: dts: qcom: align led node names with dtschema
ARM: dts: qcom: align gpio-key node names with dtschema
arm64: dts: rockchip: align gpio-key node names with dtschema
ARM: dts: rockchip: align gpio-key node names with dtschema
ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties
arm64: dts: ti: align gpio-key node names with dtschema
arm64: dts: xilinx: align gpio-key node names with dtschema
ARM: dts: xilinx: align gpio-key node names with dtschema
ARM: dts: omap: align gpio-key node names with dtschema
ARM: dts: omap: correct gpio-keys properties
ARM: dts: animeo: align gpio-key node names with dtschema
ARM: dts: animeo: correct gpio-keys properties
ARM: dts: aspeed: align gpio-key node names with dtschema
ARM: dts: aspeed: correct gpio-keys properties
ARM: dts: at91: align gpio-key node names with dtschema
ARM: dts: at91: correct gpio-keys properties
ARM: dts: at91: drop unneeded status from gpio-keys
.../devicetree/bindings/input/gpio-keys.yaml | 159 +++++++++---------
.../pinctrl/nuvoton,wpcm450-pinctrl.yaml | 2 +-
arch/arm/boot/dts/am335x-evm.dts | 8 +-
arch/arm/boot/dts/am335x-guardian.dts | 2 -
.../boot/dts/am335x-moxa-uc-2100-common.dtsi | 4 +-
.../boot/dts/am335x-moxa-uc-8100-common.dtsi | 4 +-
arch/arm/boot/dts/am335x-pcm-953.dtsi | 4 +-
arch/arm/boot/dts/am335x-pepper.dts | 8 +-
arch/arm/boot/dts/am335x-shc.dts | 6 +-
arch/arm/boot/dts/am3517-evm-ui.dtsi | 20 +--
arch/arm/boot/dts/am3517-evm.dts | 18 +-
arch/arm/boot/dts/am437x-idk-evm.dts | 6 +-
arch/arm/boot/dts/animeo_ip.dts | 10 +-
arch/arm/boot/dts/armada-370-c200-v2.dts | 8 +-
arch/arm/boot/dts/armada-370-rd.dts | 2 -
.../boot/dts/armada-370-seagate-nas-xbay.dtsi | 8 +-
.../armada-370-seagate-personal-cloud.dtsi | 8 +-
.../boot/dts/armada-381-netgear-gs110emx.dts | 2 +-
.../arm/boot/dts/armada-385-clearfog-gtr.dtsi | 4 +-
arch/arm/boot/dts/armada-385-linksys.dtsi | 4 +-
.../arm/boot/dts/armada-388-clearfog-base.dts | 2 +-
arch/arm/boot/dts/armada-388-clearfog.dts | 2 +-
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 6 +-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +-
.../boot/dts/armada-xp-openblocks-ax3-4.dts | 6 +-
.../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 30 ++--
.../boot/dts/aspeed-bmc-bytedance-g220a.dts | 48 +++---
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 10 +-
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 14 +-
.../boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 22 +--
arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 23 +--
arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 20 +--
arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 30 ++--
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 14 +-
arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 4 +-
.../boot/dts/aspeed-bmc-opp-witherspoon.dts | 16 +-
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 4 +-
arch/arm/boot/dts/at91-foxg20.dts | 4 +-
arch/arm/boot/dts/at91-gatwick.dts | 2 +-
arch/arm/boot/dts/at91-kizbox.dts | 8 +-
arch/arm/boot/dts/at91-kizbox2-common.dtsi | 10 +-
arch/arm/boot/dts/at91-kizbox3-hs.dts | 12 +-
arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 6 +-
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
arch/arm/boot/dts/at91-qil_a9260.dts | 4 +-
arch/arm/boot/dts/at91-sam9x60ek.dts | 5 +-
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 +-
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 5 +-
arch/arm/boot/dts/at91-sama5d2_icp.dts | 5 +-
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 4 +-
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d4ek.dts | 4 +-
arch/arm/boot/dts/at91-sama7g5ek.dts | 4 +-
arch/arm/boot/dts/at91-wb45n.dts | 7 +-
arch/arm/boot/dts/at91-wb50n.dts | 10 +-
arch/arm/boot/dts/at91sam9260ek.dts | 6 +-
arch/arm/boot/dts/at91sam9261ek.dts | 10 +-
arch/arm/boot/dts/at91sam9263ek.dts | 6 +-
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 +-
.../dts/at91sam9g25-gardena-smart-gateway.dts | 2 +-
arch/arm/boot/dts/at91sam9m10g45ek.dts | 16 +-
arch/arm/boot/dts/at91sam9n12ek.dts | 4 +-
arch/arm/boot/dts/at91sam9rlek.dts | 6 +-
arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 4 +-
arch/arm/boot/dts/mt7623a-rfb-nand.dts | 4 +-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 4 +-
arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 4 +-
arch/arm/boot/dts/mt7629-rfb.dts | 4 +-
.../boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 4 +-
.../qcom-apq8064-sony-xperia-lagan-yuga.dts | 8 +-
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi | 2 +-
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 4 +-
arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi | 6 +-
.../qcom-msm8974-lge-nexus5-hammerhead.dts | 4 +-
.../dts/qcom-msm8974-sony-xperia-rhine.dtsi | 8 +-
.../dts/qcom-msm8974pro-fairphone-fp2.dts | 6 +-
.../boot/dts/qcom-msm8974pro-samsung-klte.dts | 6 +-
...-msm8974pro-sony-xperia-shinano-castor.dts | 8 +-
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 4 +-
arch/arm/boot/dts/rk3066a-rayeager.dts | 2 +-
arch/arm/boot/dts/rk3188-bqedison2qc.dts | 4 +-
arch/arm/boot/dts/rk3188-px3-evb.dts | 2 +-
arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
arch/arm/boot/dts/rk3229-evb.dts | 2 +-
arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
arch/arm/boot/dts/rk3288-firefly-reload.dts | 2 +-
arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +-
arch/arm/boot/dts/rk3288-phycore-rdk.dts | 4 +-
arch/arm/boot/dts/rk3288-popmetal.dts | 2 +-
arch/arm/boot/dts/rk3288-r89.dts | 2 +-
arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +-
arch/arm/boot/dts/rk3288-tinker.dtsi | 4 +-
.../boot/dts/rk3288-veyron-chromebook.dtsi | 2 +-
arch/arm/boot/dts/rk3288-veyron-minnie.dts | 4 +-
arch/arm/boot/dts/rk3288-veyron-pinky.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron.dtsi | 2 +-
arch/arm/boot/dts/tegra114-asus-tf701t.dts | 8 +-
arch/arm/boot/dts/tegra114-dalmore.dts | 8 +-
arch/arm/boot/dts/tegra114-roth.dts | 6 +-
arch/arm/boot/dts/tegra114-tn7.dts | 6 +-
arch/arm/boot/dts/tegra124-apalis-eval.dts | 2 +-
.../boot/dts/tegra124-apalis-v1.2-eval.dts | 2 +-
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +-
arch/arm/boot/dts/tegra124-nyan.dtsi | 4 +-
arch/arm/boot/dts/tegra124-venice2.dts | 2 +-
.../boot/dts/tegra20-acer-a500-picasso.dts | 8 +-
arch/arm/boot/dts/tegra20-asus-tf101.dts | 8 +-
arch/arm/boot/dts/tegra20-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra20-colibri-iris.dts | 2 +-
arch/arm/boot/dts/tegra20-harmony.dts | 2 +-
arch/arm/boot/dts/tegra20-paz00.dts | 2 +-
arch/arm/boot/dts/tegra20-seaboard.dts | 4 +-
arch/arm/boot/dts/tegra20-trimslice.dts | 2 +-
arch/arm/boot/dts/tegra20-ventana.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis-eval.dts | 2 +-
.../arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 2 +-
.../tegra30-asus-nexus7-grouper-common.dtsi | 8 +-
.../dts/tegra30-asus-transformer-common.dtsi | 10 +-
arch/arm/boot/dts/tegra30-cardhu.dtsi | 6 +-
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra30-ouya.dts | 2 +-
.../arm/boot/dts/tegra30-pegatron-chagall.dts | 10 +-
arch/arm/boot/dts/zynq-zc702.dts | 4 +-
arch/arm/boot/dts/zynq-zturn-common.dtsi | 2 +-
arch/arm64/boot/dts/apm/apm-merlin.dts | 2 +-
arch/arm64/boot/dts/apm/apm-mustang.dts | 2 +-
.../bcm4906-tplink-archer-c2300-v1.dts | 8 +-
.../bcm4908/bcm4908-asus-gt-ac5300.dts | 8 +-
.../boot/dts/freescale/fsl-ls1088a-ten64.dts | 10 +-
.../boot/dts/freescale/imx8mm-mx8menlo.dts | 4 +-
.../dts/freescale/imx8mm-var-som-symphony.dts | 6 +-
.../dts/freescale/imx8mm-venice-gw700x.dtsi | 8 +-
.../dts/freescale/imx8mm-venice-gw7901.dts | 8 +-
.../dts/freescale/imx8mm-venice-gw7902.dts | 8 +-
.../dts/freescale/imx8mm-venice-gw7903.dts | 6 +-
.../boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
.../dts/freescale/imx8mn-var-som-symphony.dts | 6 +-
.../dts/freescale/imx8mn-venice-gw7902.dts | 8 +-
.../boot/dts/freescale/imx8mp-verdin.dtsi | 2 +-
.../dts/freescale/imx8mq-librem5-devkit.dts | 6 +-
.../boot/dts/freescale/imx8mq-librem5.dtsi | 4 +-
.../boot/dts/freescale/imx8mq-nitrogen.dts | 2 +-
.../freescale/imx8qxp-colibri-eval-v3.dtsi | 2 +-
arch/arm64/boot/dts/freescale/mba8mx.dtsi | 6 +-
.../boot/dts/hisilicon/hi3660-hikey960.dts | 2 +-
arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 6 +-
.../dts/marvell/armada-3720-turris-mox.dts | 4 +-
.../marvell/armada-8040-clearfog-gt-8k.dts | 4 +-
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 11 +-
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 5 +-
.../dts/mediatek/mt8173-elm-hana-rev7.dts | 6 +-
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 10 +-
.../dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 4 +-
.../dts/mediatek/mt8183-kukui-kakadu.dtsi | 2 +-
.../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 2 +-
.../boot/dts/mediatek/pumpkin-common.dtsi | 4 +-
.../arm64/boot/dts/nvidia/tegra132-norrin.dts | 4 +-
.../boot/dts/nvidia/tegra186-p2771-0000.dts | 6 +-
.../nvidia/tegra186-p3509-0000+p3636-0001.dts | 6 +-
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 4 +-
.../boot/dts/nvidia/tegra194-p3509-0000.dtsi | 4 +-
.../arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 6 +-
.../arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 2 +-
.../boot/dts/nvidia/tegra210-p3450-0000.dts | 4 +-
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 10 +-
.../nvidia/tegra234-p3737-0000+p3701-0000.dts | 6 +-
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 4 +-
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 6 +-
.../boot/dts/qcom/msm8916-alcatel-idol347.dts | 2 +-
.../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 4 +-
.../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 2 +-
.../boot/dts/qcom/msm8916-longcheer-l8150.dts | 2 +-
.../boot/dts/qcom/msm8916-longcheer-l8910.dts | 2 +-
.../qcom/msm8916-samsung-a2015-common.dtsi | 6 +-
.../boot/dts/qcom/msm8916-samsung-j5.dts | 4 +-
.../dts/qcom/msm8916-samsung-serranove.dts | 6 +-
.../dts/qcom/msm8916-wingtech-wt88047.dts | 2 +-
.../boot/dts/qcom/msm8992-xiaomi-libra.dts | 6 +-
.../dts/qcom/msm8994-msft-lumia-octagon.dtsi | 10 +-
.../qcom/msm8994-sony-xperia-kitakami.dtsi | 12 +-
.../boot/dts/qcom/msm8996-xiaomi-common.dtsi | 6 +-
.../boot/dts/qcom/msm8998-fxtec-pro1.dts | 26 ++-
.../boot/dts/qcom/msm8998-oneplus-common.dtsi | 6 +-
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 8 +-
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 +-
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 11 +-
.../boot/dts/qcom/sdm632-fairphone-fp3.dts | 2 +-
.../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 2 +-
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 10 +-
.../boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 +-
.../boot/dts/qcom/sdm845-shift-axolotl.dts | 2 +-
.../dts/qcom/sdm845-sony-xperia-tama.dtsi | 2 +-
.../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 2 +-
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 +-
.../qcom/sm6125-sony-xperia-seine-pdx201.dts | 4 +-
.../boot/dts/qcom/sm7225-fairphone-fp4.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 4 +-
.../dts/qcom/sm8150-microsoft-surface-duo.dts | 4 +-
arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 4 +-
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 2 +-
.../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 2 +-
.../boot/dts/rockchip/rk3326-odroid-go2.dts | 32 ++--
.../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi | 2 +-
.../boot/dts/rockchip/rk3368-geekbox.dts | 2 +-
.../dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
.../boot/dts/rockchip/rk3368-px5-evb.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +-
.../boot/dts/rockchip/rk3399-firefly.dts | 2 +-
.../dts/rockchip/rk3399-gru-chromebook.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-gru-kevin.dts | 2 +-
.../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-khadas-edge.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 4 +-
.../boot/dts/rockchip/rk3399-nanopi4.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-orangepi.dts | 2 +-
.../boot/dts/rockchip/rk3399-pinebook-pro.dts | 4 +-
.../boot/dts/rockchip/rk3399-roc-pc.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-rockpro64.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-sapphire.dtsi | 2 +-
.../boot/dts/rockchip/rk3566-pinenote.dtsi | 2 +-
.../arm64/boot/dts/ti/k3-am654-base-board.dts | 4 +-
.../dts/ti/k3-j721e-common-proc-board.dts | 4 +-
.../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 +-
236 files changed, 696 insertions(+), 757 deletions(-)
--
2.34.1
^ permalink raw reply [flat|nested] 163+ messages in thread
* [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
@ 2022-06-16 0:52 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson
Cc: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski,
Jonathan Neuschäfer, Linus Walleij, Benoît Cousson,
Tony Lindgren, Andrew Lunn, Gregory Clement,
Sebastian Hesselbarth, Russell King, Joel Stanley,
Andrew Jeffery, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea,
Peter Rosin, Matthias Brugger, Andy Gross, Bjorn Andersson,
Heiko Stuebner, Thierry Reding, Jonathan Hunter, Michal Simek,
Khuong Dinh, Shawn Guo, Li Yang, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, Wei Xu,
Nishanth Menon, Vignesh Raghavendra, Tero Kristo, linux-input,
devicetree, linux-kernel, openbmc, linux-gpio, linux-omap,
linux-arm-kernel, linux-aspeed, linux-mediatek, linux-arm-msm,
linux-rockchip, linux-tegra, Krzysztof Kozlowski
Hi,
Merging
=======
1. dt-bindings: rebased on top of Rob's:
https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
2. DTS patches are independent. They can be picked up directly by sub-arch
maintainers, by Arnd or Olof, or eventually by me (if you wish).
Changes since v2
================
1. Few node renamings according to comments (at91, rockchip, nuvoton,wpcm450-pinctrl.yaml).
2. Add Rb tags.
3. Drop applied patches: allwinner, amlogic, broadcom and samsung.
Changes since v1
================
Patch 1: Extend gpio-keys nodes pattern to cover buttons, events and switches (Jeff).
Patch 2: Include input.yaml (Dmitry, Rob).
Patch 3: New patch.
New DTS patches.
Best regards,
Krzysztof
Krzysztof Kozlowski (40):
dt-bindings: input: gpio-keys: enforce node names to match all
properties
dt-bindings: input: gpio-keys: reference input.yaml and document
properties
dt-bindings: input: gpio-keys: accept also interrupt-extended
dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
arm64: dts: apm: correct gpio-keys properties
arm64: dts: broadcom: align gpio-key node names with dtschema
arm64: dts: freescale: align gpio-key node names with dtschema
arm64: dts: freescale: align led node names with dtschema
arm64: dts: hisilicon: align gpio-key node names with dtschema
arm64: dts: hisilicon: correct gpio-keys properties
arm64: dts: marvell: align gpio-key node names with dtschema
arm64: dts: marvell: armada-3720: align lednode names with dtschema
ARM: dts: marvell: align gpio-key node names with dtschema
ARM: dts: marvell: correct gpio-keys properties
arm64: dts: mediatek: align gpio-key node names with dtschema
arm64: dts: mediatek: mt7622-bananapi-bpi-r64: align led node names
with dtschema
arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties
ARM: dts: mediatek: align gpio-key node names with dtschema
arm64: dts: tegra: align gpio-key node names with dtschema
ARM: dts: tegra: align gpio-key node names with dtschema
arm64: dts: qcom: align gpio-key node names with dtschema
arm64: dts: qcom: correct gpio-keys properties
arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from
gpio-keys
arm64: dts: qcom: align led node names with dtschema
ARM: dts: qcom: align gpio-key node names with dtschema
arm64: dts: rockchip: align gpio-key node names with dtschema
ARM: dts: rockchip: align gpio-key node names with dtschema
ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties
arm64: dts: ti: align gpio-key node names with dtschema
arm64: dts: xilinx: align gpio-key node names with dtschema
ARM: dts: xilinx: align gpio-key node names with dtschema
ARM: dts: omap: align gpio-key node names with dtschema
ARM: dts: omap: correct gpio-keys properties
ARM: dts: animeo: align gpio-key node names with dtschema
ARM: dts: animeo: correct gpio-keys properties
ARM: dts: aspeed: align gpio-key node names with dtschema
ARM: dts: aspeed: correct gpio-keys properties
ARM: dts: at91: align gpio-key node names with dtschema
ARM: dts: at91: correct gpio-keys properties
ARM: dts: at91: drop unneeded status from gpio-keys
.../devicetree/bindings/input/gpio-keys.yaml | 159 +++++++++---------
.../pinctrl/nuvoton,wpcm450-pinctrl.yaml | 2 +-
arch/arm/boot/dts/am335x-evm.dts | 8 +-
arch/arm/boot/dts/am335x-guardian.dts | 2 -
.../boot/dts/am335x-moxa-uc-2100-common.dtsi | 4 +-
.../boot/dts/am335x-moxa-uc-8100-common.dtsi | 4 +-
arch/arm/boot/dts/am335x-pcm-953.dtsi | 4 +-
arch/arm/boot/dts/am335x-pepper.dts | 8 +-
arch/arm/boot/dts/am335x-shc.dts | 6 +-
arch/arm/boot/dts/am3517-evm-ui.dtsi | 20 +--
arch/arm/boot/dts/am3517-evm.dts | 18 +-
arch/arm/boot/dts/am437x-idk-evm.dts | 6 +-
arch/arm/boot/dts/animeo_ip.dts | 10 +-
arch/arm/boot/dts/armada-370-c200-v2.dts | 8 +-
arch/arm/boot/dts/armada-370-rd.dts | 2 -
.../boot/dts/armada-370-seagate-nas-xbay.dtsi | 8 +-
.../armada-370-seagate-personal-cloud.dtsi | 8 +-
.../boot/dts/armada-381-netgear-gs110emx.dts | 2 +-
.../arm/boot/dts/armada-385-clearfog-gtr.dtsi | 4 +-
arch/arm/boot/dts/armada-385-linksys.dtsi | 4 +-
.../arm/boot/dts/armada-388-clearfog-base.dts | 2 +-
arch/arm/boot/dts/armada-388-clearfog.dts | 2 +-
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 6 +-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +-
.../boot/dts/armada-xp-openblocks-ax3-4.dts | 6 +-
.../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 30 ++--
.../boot/dts/aspeed-bmc-bytedance-g220a.dts | 48 +++---
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 10 +-
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 14 +-
.../boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 22 +--
arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 23 +--
arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 20 +--
arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 30 ++--
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 14 +-
arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 4 +-
.../boot/dts/aspeed-bmc-opp-witherspoon.dts | 16 +-
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 4 +-
arch/arm/boot/dts/at91-foxg20.dts | 4 +-
arch/arm/boot/dts/at91-gatwick.dts | 2 +-
arch/arm/boot/dts/at91-kizbox.dts | 8 +-
arch/arm/boot/dts/at91-kizbox2-common.dtsi | 10 +-
arch/arm/boot/dts/at91-kizbox3-hs.dts | 12 +-
arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 6 +-
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
arch/arm/boot/dts/at91-qil_a9260.dts | 4 +-
arch/arm/boot/dts/at91-sam9x60ek.dts | 5 +-
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 +-
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 5 +-
arch/arm/boot/dts/at91-sama5d2_icp.dts | 5 +-
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 4 +-
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d4ek.dts | 4 +-
arch/arm/boot/dts/at91-sama7g5ek.dts | 4 +-
arch/arm/boot/dts/at91-wb45n.dts | 7 +-
arch/arm/boot/dts/at91-wb50n.dts | 10 +-
arch/arm/boot/dts/at91sam9260ek.dts | 6 +-
arch/arm/boot/dts/at91sam9261ek.dts | 10 +-
arch/arm/boot/dts/at91sam9263ek.dts | 6 +-
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 +-
.../dts/at91sam9g25-gardena-smart-gateway.dts | 2 +-
arch/arm/boot/dts/at91sam9m10g45ek.dts | 16 +-
arch/arm/boot/dts/at91sam9n12ek.dts | 4 +-
arch/arm/boot/dts/at91sam9rlek.dts | 6 +-
arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 4 +-
arch/arm/boot/dts/mt7623a-rfb-nand.dts | 4 +-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 4 +-
arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 4 +-
arch/arm/boot/dts/mt7629-rfb.dts | 4 +-
.../boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 4 +-
.../qcom-apq8064-sony-xperia-lagan-yuga.dts | 8 +-
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi | 2 +-
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 4 +-
arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi | 6 +-
.../qcom-msm8974-lge-nexus5-hammerhead.dts | 4 +-
.../dts/qcom-msm8974-sony-xperia-rhine.dtsi | 8 +-
.../dts/qcom-msm8974pro-fairphone-fp2.dts | 6 +-
.../boot/dts/qcom-msm8974pro-samsung-klte.dts | 6 +-
...-msm8974pro-sony-xperia-shinano-castor.dts | 8 +-
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 4 +-
arch/arm/boot/dts/rk3066a-rayeager.dts | 2 +-
arch/arm/boot/dts/rk3188-bqedison2qc.dts | 4 +-
arch/arm/boot/dts/rk3188-px3-evb.dts | 2 +-
arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
arch/arm/boot/dts/rk3229-evb.dts | 2 +-
arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
arch/arm/boot/dts/rk3288-firefly-reload.dts | 2 +-
arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +-
arch/arm/boot/dts/rk3288-phycore-rdk.dts | 4 +-
arch/arm/boot/dts/rk3288-popmetal.dts | 2 +-
arch/arm/boot/dts/rk3288-r89.dts | 2 +-
arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +-
arch/arm/boot/dts/rk3288-tinker.dtsi | 4 +-
.../boot/dts/rk3288-veyron-chromebook.dtsi | 2 +-
arch/arm/boot/dts/rk3288-veyron-minnie.dts | 4 +-
arch/arm/boot/dts/rk3288-veyron-pinky.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron.dtsi | 2 +-
arch/arm/boot/dts/tegra114-asus-tf701t.dts | 8 +-
arch/arm/boot/dts/tegra114-dalmore.dts | 8 +-
arch/arm/boot/dts/tegra114-roth.dts | 6 +-
arch/arm/boot/dts/tegra114-tn7.dts | 6 +-
arch/arm/boot/dts/tegra124-apalis-eval.dts | 2 +-
.../boot/dts/tegra124-apalis-v1.2-eval.dts | 2 +-
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +-
arch/arm/boot/dts/tegra124-nyan.dtsi | 4 +-
arch/arm/boot/dts/tegra124-venice2.dts | 2 +-
.../boot/dts/tegra20-acer-a500-picasso.dts | 8 +-
arch/arm/boot/dts/tegra20-asus-tf101.dts | 8 +-
arch/arm/boot/dts/tegra20-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra20-colibri-iris.dts | 2 +-
arch/arm/boot/dts/tegra20-harmony.dts | 2 +-
arch/arm/boot/dts/tegra20-paz00.dts | 2 +-
arch/arm/boot/dts/tegra20-seaboard.dts | 4 +-
arch/arm/boot/dts/tegra20-trimslice.dts | 2 +-
arch/arm/boot/dts/tegra20-ventana.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis-eval.dts | 2 +-
.../arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 2 +-
.../tegra30-asus-nexus7-grouper-common.dtsi | 8 +-
.../dts/tegra30-asus-transformer-common.dtsi | 10 +-
arch/arm/boot/dts/tegra30-cardhu.dtsi | 6 +-
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra30-ouya.dts | 2 +-
.../arm/boot/dts/tegra30-pegatron-chagall.dts | 10 +-
arch/arm/boot/dts/zynq-zc702.dts | 4 +-
arch/arm/boot/dts/zynq-zturn-common.dtsi | 2 +-
arch/arm64/boot/dts/apm/apm-merlin.dts | 2 +-
arch/arm64/boot/dts/apm/apm-mustang.dts | 2 +-
.../bcm4906-tplink-archer-c2300-v1.dts | 8 +-
.../bcm4908/bcm4908-asus-gt-ac5300.dts | 8 +-
.../boot/dts/freescale/fsl-ls1088a-ten64.dts | 10 +-
.../boot/dts/freescale/imx8mm-mx8menlo.dts | 4 +-
.../dts/freescale/imx8mm-var-som-symphony.dts | 6 +-
.../dts/freescale/imx8mm-venice-gw700x.dtsi | 8 +-
.../dts/freescale/imx8mm-venice-gw7901.dts | 8 +-
.../dts/freescale/imx8mm-venice-gw7902.dts | 8 +-
.../dts/freescale/imx8mm-venice-gw7903.dts | 6 +-
.../boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
.../dts/freescale/imx8mn-var-som-symphony.dts | 6 +-
.../dts/freescale/imx8mn-venice-gw7902.dts | 8 +-
.../boot/dts/freescale/imx8mp-verdin.dtsi | 2 +-
.../dts/freescale/imx8mq-librem5-devkit.dts | 6 +-
.../boot/dts/freescale/imx8mq-librem5.dtsi | 4 +-
.../boot/dts/freescale/imx8mq-nitrogen.dts | 2 +-
.../freescale/imx8qxp-colibri-eval-v3.dtsi | 2 +-
arch/arm64/boot/dts/freescale/mba8mx.dtsi | 6 +-
.../boot/dts/hisilicon/hi3660-hikey960.dts | 2 +-
arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 6 +-
.../dts/marvell/armada-3720-turris-mox.dts | 4 +-
.../marvell/armada-8040-clearfog-gt-8k.dts | 4 +-
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 11 +-
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 5 +-
.../dts/mediatek/mt8173-elm-hana-rev7.dts | 6 +-
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 10 +-
.../dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 4 +-
.../dts/mediatek/mt8183-kukui-kakadu.dtsi | 2 +-
.../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 2 +-
.../boot/dts/mediatek/pumpkin-common.dtsi | 4 +-
.../arm64/boot/dts/nvidia/tegra132-norrin.dts | 4 +-
.../boot/dts/nvidia/tegra186-p2771-0000.dts | 6 +-
.../nvidia/tegra186-p3509-0000+p3636-0001.dts | 6 +-
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 4 +-
.../boot/dts/nvidia/tegra194-p3509-0000.dtsi | 4 +-
.../arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 6 +-
.../arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 2 +-
.../boot/dts/nvidia/tegra210-p3450-0000.dts | 4 +-
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 10 +-
.../nvidia/tegra234-p3737-0000+p3701-0000.dts | 6 +-
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 4 +-
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 6 +-
.../boot/dts/qcom/msm8916-alcatel-idol347.dts | 2 +-
.../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 4 +-
.../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 2 +-
.../boot/dts/qcom/msm8916-longcheer-l8150.dts | 2 +-
.../boot/dts/qcom/msm8916-longcheer-l8910.dts | 2 +-
.../qcom/msm8916-samsung-a2015-common.dtsi | 6 +-
.../boot/dts/qcom/msm8916-samsung-j5.dts | 4 +-
.../dts/qcom/msm8916-samsung-serranove.dts | 6 +-
.../dts/qcom/msm8916-wingtech-wt88047.dts | 2 +-
.../boot/dts/qcom/msm8992-xiaomi-libra.dts | 6 +-
.../dts/qcom/msm8994-msft-lumia-octagon.dtsi | 10 +-
.../qcom/msm8994-sony-xperia-kitakami.dtsi | 12 +-
.../boot/dts/qcom/msm8996-xiaomi-common.dtsi | 6 +-
.../boot/dts/qcom/msm8998-fxtec-pro1.dts | 26 ++-
.../boot/dts/qcom/msm8998-oneplus-common.dtsi | 6 +-
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 8 +-
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 +-
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 11 +-
.../boot/dts/qcom/sdm632-fairphone-fp3.dts | 2 +-
.../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 2 +-
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 10 +-
.../boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 +-
.../boot/dts/qcom/sdm845-shift-axolotl.dts | 2 +-
.../dts/qcom/sdm845-sony-xperia-tama.dtsi | 2 +-
.../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 2 +-
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 +-
.../qcom/sm6125-sony-xperia-seine-pdx201.dts | 4 +-
.../boot/dts/qcom/sm7225-fairphone-fp4.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 4 +-
.../dts/qcom/sm8150-microsoft-surface-duo.dts | 4 +-
arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 4 +-
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 2 +-
.../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 2 +-
.../boot/dts/rockchip/rk3326-odroid-go2.dts | 32 ++--
.../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi | 2 +-
.../boot/dts/rockchip/rk3368-geekbox.dts | 2 +-
.../dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
.../boot/dts/rockchip/rk3368-px5-evb.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +-
.../boot/dts/rockchip/rk3399-firefly.dts | 2 +-
.../dts/rockchip/rk3399-gru-chromebook.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-gru-kevin.dts | 2 +-
.../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-khadas-edge.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 4 +-
.../boot/dts/rockchip/rk3399-nanopi4.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-orangepi.dts | 2 +-
.../boot/dts/rockchip/rk3399-pinebook-pro.dts | 4 +-
.../boot/dts/rockchip/rk3399-roc-pc.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-rockpro64.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-sapphire.dtsi | 2 +-
.../boot/dts/rockchip/rk3566-pinenote.dtsi | 2 +-
.../arm64/boot/dts/ti/k3-am654-base-board.dts | 4 +-
.../dts/ti/k3-j721e-common-proc-board.dts | 4 +-
.../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 +-
236 files changed, 696 insertions(+), 757 deletions(-)
--
2.34.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 163+ messages in thread
* [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
@ 2022-06-16 0:52 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson
Cc: Nishanth Menon, Andrew Lunn, Alexandre Belloni, Heiko Stuebner,
linux-aspeed, Tony Lindgren, Linus Walleij, Bjorn Andersson,
linux-tegra, Thierry Reding, Krzysztof Kozlowski, Li Yang,
Fabio Estevam, Michal Simek, Vignesh Raghavendra, Khuong Dinh,
Gregory Clement, Russell King, Wei Xu, Jonathan Hunter,
linux-rockchip, Andy Gross, Joel Stanley, linux-input,
Sebastian Hesselbarth, linux-arm-msm
Hi,
Merging
=======
1. dt-bindings: rebased on top of Rob's:
https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
2. DTS patches are independent. They can be picked up directly by sub-arch
maintainers, by Arnd or Olof, or eventually by me (if you wish).
Changes since v2
================
1. Few node renamings according to comments (at91, rockchip, nuvoton,wpcm450-pinctrl.yaml).
2. Add Rb tags.
3. Drop applied patches: allwinner, amlogic, broadcom and samsung.
Changes since v1
================
Patch 1: Extend gpio-keys nodes pattern to cover buttons, events and switches (Jeff).
Patch 2: Include input.yaml (Dmitry, Rob).
Patch 3: New patch.
New DTS patches.
Best regards,
Krzysztof
Krzysztof Kozlowski (40):
dt-bindings: input: gpio-keys: enforce node names to match all
properties
dt-bindings: input: gpio-keys: reference input.yaml and document
properties
dt-bindings: input: gpio-keys: accept also interrupt-extended
dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
arm64: dts: apm: correct gpio-keys properties
arm64: dts: broadcom: align gpio-key node names with dtschema
arm64: dts: freescale: align gpio-key node names with dtschema
arm64: dts: freescale: align led node names with dtschema
arm64: dts: hisilicon: align gpio-key node names with dtschema
arm64: dts: hisilicon: correct gpio-keys properties
arm64: dts: marvell: align gpio-key node names with dtschema
arm64: dts: marvell: armada-3720: align lednode names with dtschema
ARM: dts: marvell: align gpio-key node names with dtschema
ARM: dts: marvell: correct gpio-keys properties
arm64: dts: mediatek: align gpio-key node names with dtschema
arm64: dts: mediatek: mt7622-bananapi-bpi-r64: align led node names
with dtschema
arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties
ARM: dts: mediatek: align gpio-key node names with dtschema
arm64: dts: tegra: align gpio-key node names with dtschema
ARM: dts: tegra: align gpio-key node names with dtschema
arm64: dts: qcom: align gpio-key node names with dtschema
arm64: dts: qcom: correct gpio-keys properties
arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from
gpio-keys
arm64: dts: qcom: align led node names with dtschema
ARM: dts: qcom: align gpio-key node names with dtschema
arm64: dts: rockchip: align gpio-key node names with dtschema
ARM: dts: rockchip: align gpio-key node names with dtschema
ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties
arm64: dts: ti: align gpio-key node names with dtschema
arm64: dts: xilinx: align gpio-key node names with dtschema
ARM: dts: xilinx: align gpio-key node names with dtschema
ARM: dts: omap: align gpio-key node names with dtschema
ARM: dts: omap: correct gpio-keys properties
ARM: dts: animeo: align gpio-key node names with dtschema
ARM: dts: animeo: correct gpio-keys properties
ARM: dts: aspeed: align gpio-key node names with dtschema
ARM: dts: aspeed: correct gpio-keys properties
ARM: dts: at91: align gpio-key node names with dtschema
ARM: dts: at91: correct gpio-keys properties
ARM: dts: at91: drop unneeded status from gpio-keys
.../devicetree/bindings/input/gpio-keys.yaml | 159 +++++++++---------
.../pinctrl/nuvoton,wpcm450-pinctrl.yaml | 2 +-
arch/arm/boot/dts/am335x-evm.dts | 8 +-
arch/arm/boot/dts/am335x-guardian.dts | 2 -
.../boot/dts/am335x-moxa-uc-2100-common.dtsi | 4 +-
.../boot/dts/am335x-moxa-uc-8100-common.dtsi | 4 +-
arch/arm/boot/dts/am335x-pcm-953.dtsi | 4 +-
arch/arm/boot/dts/am335x-pepper.dts | 8 +-
arch/arm/boot/dts/am335x-shc.dts | 6 +-
arch/arm/boot/dts/am3517-evm-ui.dtsi | 20 +--
arch/arm/boot/dts/am3517-evm.dts | 18 +-
arch/arm/boot/dts/am437x-idk-evm.dts | 6 +-
arch/arm/boot/dts/animeo_ip.dts | 10 +-
arch/arm/boot/dts/armada-370-c200-v2.dts | 8 +-
arch/arm/boot/dts/armada-370-rd.dts | 2 -
.../boot/dts/armada-370-seagate-nas-xbay.dtsi | 8 +-
.../armada-370-seagate-personal-cloud.dtsi | 8 +-
.../boot/dts/armada-381-netgear-gs110emx.dts | 2 +-
.../arm/boot/dts/armada-385-clearfog-gtr.dtsi | 4 +-
arch/arm/boot/dts/armada-385-linksys.dtsi | 4 +-
.../arm/boot/dts/armada-388-clearfog-base.dts | 2 +-
arch/arm/boot/dts/armada-388-clearfog.dts | 2 +-
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 6 +-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +-
.../boot/dts/armada-xp-openblocks-ax3-4.dts | 6 +-
.../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 30 ++--
.../boot/dts/aspeed-bmc-bytedance-g220a.dts | 48 +++---
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 10 +-
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 14 +-
.../boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 22 +--
arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 23 +--
arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 20 +--
arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 30 ++--
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 14 +-
arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 4 +-
.../boot/dts/aspeed-bmc-opp-witherspoon.dts | 16 +-
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 4 +-
arch/arm/boot/dts/at91-foxg20.dts | 4 +-
arch/arm/boot/dts/at91-gatwick.dts | 2 +-
arch/arm/boot/dts/at91-kizbox.dts | 8 +-
arch/arm/boot/dts/at91-kizbox2-common.dtsi | 10 +-
arch/arm/boot/dts/at91-kizbox3-hs.dts | 12 +-
arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 6 +-
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
arch/arm/boot/dts/at91-qil_a9260.dts | 4 +-
arch/arm/boot/dts/at91-sam9x60ek.dts | 5 +-
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 +-
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 5 +-
arch/arm/boot/dts/at91-sama5d2_icp.dts | 5 +-
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 4 +-
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d4ek.dts | 4 +-
arch/arm/boot/dts/at91-sama7g5ek.dts | 4 +-
arch/arm/boot/dts/at91-wb45n.dts | 7 +-
arch/arm/boot/dts/at91-wb50n.dts | 10 +-
arch/arm/boot/dts/at91sam9260ek.dts | 6 +-
arch/arm/boot/dts/at91sam9261ek.dts | 10 +-
arch/arm/boot/dts/at91sam9263ek.dts | 6 +-
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 +-
.../dts/at91sam9g25-gardena-smart-gateway.dts | 2 +-
arch/arm/boot/dts/at91sam9m10g45ek.dts | 16 +-
arch/arm/boot/dts/at91sam9n12ek.dts | 4 +-
arch/arm/boot/dts/at91sam9rlek.dts | 6 +-
arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 4 +-
arch/arm/boot/dts/mt7623a-rfb-nand.dts | 4 +-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 4 +-
arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 4 +-
arch/arm/boot/dts/mt7629-rfb.dts | 4 +-
.../boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 4 +-
.../qcom-apq8064-sony-xperia-lagan-yuga.dts | 8 +-
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi | 2 +-
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 4 +-
arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi | 6 +-
.../qcom-msm8974-lge-nexus5-hammerhead.dts | 4 +-
.../dts/qcom-msm8974-sony-xperia-rhine.dtsi | 8 +-
.../dts/qcom-msm8974pro-fairphone-fp2.dts | 6 +-
.../boot/dts/qcom-msm8974pro-samsung-klte.dts | 6 +-
...-msm8974pro-sony-xperia-shinano-castor.dts | 8 +-
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 4 +-
arch/arm/boot/dts/rk3066a-rayeager.dts | 2 +-
arch/arm/boot/dts/rk3188-bqedison2qc.dts | 4 +-
arch/arm/boot/dts/rk3188-px3-evb.dts | 2 +-
arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
arch/arm/boot/dts/rk3229-evb.dts | 2 +-
arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
arch/arm/boot/dts/rk3288-firefly-reload.dts | 2 +-
arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +-
arch/arm/boot/dts/rk3288-phycore-rdk.dts | 4 +-
arch/arm/boot/dts/rk3288-popmetal.dts | 2 +-
arch/arm/boot/dts/rk3288-r89.dts | 2 +-
arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +-
arch/arm/boot/dts/rk3288-tinker.dtsi | 4 +-
.../boot/dts/rk3288-veyron-chromebook.dtsi | 2 +-
arch/arm/boot/dts/rk3288-veyron-minnie.dts | 4 +-
arch/arm/boot/dts/rk3288-veyron-pinky.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron.dtsi | 2 +-
arch/arm/boot/dts/tegra114-asus-tf701t.dts | 8 +-
arch/arm/boot/dts/tegra114-dalmore.dts | 8 +-
arch/arm/boot/dts/tegra114-roth.dts | 6 +-
arch/arm/boot/dts/tegra114-tn7.dts | 6 +-
arch/arm/boot/dts/tegra124-apalis-eval.dts | 2 +-
.../boot/dts/tegra124-apalis-v1.2-eval.dts | 2 +-
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +-
arch/arm/boot/dts/tegra124-nyan.dtsi | 4 +-
arch/arm/boot/dts/tegra124-venice2.dts | 2 +-
.../boot/dts/tegra20-acer-a500-picasso.dts | 8 +-
arch/arm/boot/dts/tegra20-asus-tf101.dts | 8 +-
arch/arm/boot/dts/tegra20-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra20-colibri-iris.dts | 2 +-
arch/arm/boot/dts/tegra20-harmony.dts | 2 +-
arch/arm/boot/dts/tegra20-paz00.dts | 2 +-
arch/arm/boot/dts/tegra20-seaboard.dts | 4 +-
arch/arm/boot/dts/tegra20-trimslice.dts | 2 +-
arch/arm/boot/dts/tegra20-ventana.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis-eval.dts | 2 +-
.../arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 2 +-
.../tegra30-asus-nexus7-grouper-common.dtsi | 8 +-
.../dts/tegra30-asus-transformer-common.dtsi | 10 +-
arch/arm/boot/dts/tegra30-cardhu.dtsi | 6 +-
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra30-ouya.dts | 2 +-
.../arm/boot/dts/tegra30-pegatron-chagall.dts | 10 +-
arch/arm/boot/dts/zynq-zc702.dts | 4 +-
arch/arm/boot/dts/zynq-zturn-common.dtsi | 2 +-
arch/arm64/boot/dts/apm/apm-merlin.dts | 2 +-
arch/arm64/boot/dts/apm/apm-mustang.dts | 2 +-
.../bcm4906-tplink-archer-c2300-v1.dts | 8 +-
.../bcm4908/bcm4908-asus-gt-ac5300.dts | 8 +-
.../boot/dts/freescale/fsl-ls1088a-ten64.dts | 10 +-
.../boot/dts/freescale/imx8mm-mx8menlo.dts | 4 +-
.../dts/freescale/imx8mm-var-som-symphony.dts | 6 +-
.../dts/freescale/imx8mm-venice-gw700x.dtsi | 8 +-
.../dts/freescale/imx8mm-venice-gw7901.dts | 8 +-
.../dts/freescale/imx8mm-venice-gw7902.dts | 8 +-
.../dts/freescale/imx8mm-venice-gw7903.dts | 6 +-
.../boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
.../dts/freescale/imx8mn-var-som-symphony.dts | 6 +-
.../dts/freescale/imx8mn-venice-gw7902.dts | 8 +-
.../boot/dts/freescale/imx8mp-verdin.dtsi | 2 +-
.../dts/freescale/imx8mq-librem5-devkit.dts | 6 +-
.../boot/dts/freescale/imx8mq-librem5.dtsi | 4 +-
.../boot/dts/freescale/imx8mq-nitrogen.dts | 2 +-
.../freescale/imx8qxp-colibri-eval-v3.dtsi | 2 +-
arch/arm64/boot/dts/freescale/mba8mx.dtsi | 6 +-
.../boot/dts/hisilicon/hi3660-hikey960.dts | 2 +-
arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 6 +-
.../dts/marvell/armada-3720-turris-mox.dts | 4 +-
.../marvell/armada-8040-clearfog-gt-8k.dts | 4 +-
.../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 11 +-
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 5 +-
.../dts/mediatek/mt8173-elm-hana-rev7.dts | 6 +-
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 10 +-
.../dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 4 +-
.../dts/mediatek/mt8183-kukui-kakadu.dtsi | 2 +-
.../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 2 +-
.../boot/dts/mediatek/pumpkin-common.dtsi | 4 +-
.../arm64/boot/dts/nvidia/tegra132-norrin.dts | 4 +-
.../boot/dts/nvidia/tegra186-p2771-0000.dts | 6 +-
.../nvidia/tegra186-p3509-0000+p3636-0001.dts | 6 +-
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 4 +-
.../boot/dts/nvidia/tegra194-p3509-0000.dtsi | 4 +-
.../arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 6 +-
.../arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 2 +-
.../boot/dts/nvidia/tegra210-p3450-0000.dts | 4 +-
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 10 +-
.../nvidia/tegra234-p3737-0000+p3701-0000.dts | 6 +-
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 4 +-
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 6 +-
.../boot/dts/qcom/msm8916-alcatel-idol347.dts | 2 +-
.../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 4 +-
.../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 2 +-
.../boot/dts/qcom/msm8916-longcheer-l8150.dts | 2 +-
.../boot/dts/qcom/msm8916-longcheer-l8910.dts | 2 +-
.../qcom/msm8916-samsung-a2015-common.dtsi | 6 +-
.../boot/dts/qcom/msm8916-samsung-j5.dts | 4 +-
.../dts/qcom/msm8916-samsung-serranove.dts | 6 +-
.../dts/qcom/msm8916-wingtech-wt88047.dts | 2 +-
.../boot/dts/qcom/msm8992-xiaomi-libra.dts | 6 +-
.../dts/qcom/msm8994-msft-lumia-octagon.dtsi | 10 +-
.../qcom/msm8994-sony-xperia-kitakami.dtsi | 12 +-
.../boot/dts/qcom/msm8996-xiaomi-common.dtsi | 6 +-
.../boot/dts/qcom/msm8998-fxtec-pro1.dts | 26 ++-
.../boot/dts/qcom/msm8998-oneplus-common.dtsi | 6 +-
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 8 +-
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 +-
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 11 +-
.../boot/dts/qcom/sdm632-fairphone-fp3.dts | 2 +-
.../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 2 +-
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 10 +-
.../boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 +-
.../boot/dts/qcom/sdm845-shift-axolotl.dts | 2 +-
.../dts/qcom/sdm845-sony-xperia-tama.dtsi | 2 +-
.../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 2 +-
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 +-
.../qcom/sm6125-sony-xperia-seine-pdx201.dts | 4 +-
.../boot/dts/qcom/sm7225-fairphone-fp4.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 4 +-
.../dts/qcom/sm8150-microsoft-surface-duo.dts | 4 +-
arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 4 +-
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 2 +-
.../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 2 +-
.../boot/dts/rockchip/rk3326-odroid-go2.dts | 32 ++--
.../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi | 2 +-
.../boot/dts/rockchip/rk3368-geekbox.dts | 2 +-
.../dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
.../boot/dts/rockchip/rk3368-px5-evb.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +-
.../boot/dts/rockchip/rk3399-firefly.dts | 2 +-
.../dts/rockchip/rk3399-gru-chromebook.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-gru-kevin.dts | 2 +-
.../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-khadas-edge.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 4 +-
.../boot/dts/rockchip/rk3399-nanopi4.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-orangepi.dts | 2 +-
.../boot/dts/rockchip/rk3399-pinebook-pro.dts | 4 +-
.../boot/dts/rockchip/rk3399-roc-pc.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-rockpro64.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-sapphire.dtsi | 2 +-
.../boot/dts/rockchip/rk3566-pinenote.dtsi | 2 +-
.../arm64/boot/dts/ti/k3-am654-base-board.dts | 4 +-
.../dts/ti/k3-j721e-common-proc-board.dts | 4 +-
.../boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu102-revA.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 +-
.../boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 +-
236 files changed, 696 insertions(+), 757 deletions(-)
--
2.34.1
^ permalink raw reply [flat|nested] 163+ messages in thread
* [PATCH v3 01/40] dt-bindings: input: gpio-keys: enforce node names to match all properties
2022-06-16 0:52 ` Krzysztof Kozlowski
(?)
(?)
@ 2022-06-16 0:52 ` Krzysztof Kozlowski
2022-06-27 8:17 ` Krzysztof Kozlowski
-1 siblings, 1 reply; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Dmitry Torokhov,
Rob Herring, Krzysztof Kozlowski, linux-input, devicetree,
linux-kernel
Cc: Krzysztof Kozlowski, Rob Herring
The gpio-keys DT schema matches all properties with a wide pattern and
applies specific schema to children. This has drawback - all regular
properties are also matched and are silently ignored, even if they are
not described in schema. Basically this allows any non-object property
to be present.
Enforce specific naming pattern for children (keys) to narrow the
pattern thus do not match other properties. This will require all
children to be properly prefixed or suffixed (button, event, switch or
key).
Removal of "if:" within patternProperties causes drop of one indentation
level, but there are no other changes in the affected block.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/input/gpio-keys.yaml | 157 +++++++++---------
1 file changed, 77 insertions(+), 80 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index 645dfa1e0d07..27bb5c6ab8d9 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -16,86 +16,83 @@ properties:
- gpio-keys-polled
patternProperties:
- ".*":
- if:
- type: object
- then:
- $ref: input.yaml#
-
- properties:
- gpios:
- maxItems: 1
-
- interrupts:
- maxItems: 1
-
- label:
- description: Descriptive name of the key.
-
- linux,code:
- description: Key / Axis code to emit.
-
- linux,input-type:
- default: 1 # EV_KEY
-
- linux,input-value:
- description: |
- If linux,input-type is EV_ABS or EV_REL then this
- value is sent for events this button generates when pressed.
- EV_ABS/EV_REL axis will generate an event with a value of 0
- when all buttons with linux,input-type == type and
- linux,code == axis are released. This value is interpreted
- as a signed 32 bit value, e.g. to make a button generate a
- value of -1 use:
-
- linux,input-value = <0xffffffff>; /* -1 */
-
- $ref: /schemas/types.yaml#/definitions/uint32
-
- debounce-interval:
- description:
- Debouncing interval time in milliseconds. If not specified defaults to 5.
- $ref: /schemas/types.yaml#/definitions/uint32
-
- default: 5
-
- wakeup-source:
- description: Button can wake-up the system.
-
- wakeup-event-action:
- description: |
- Specifies whether the key should wake the system when asserted, when
- deasserted, or both. This property is only valid for keys that wake up the
- system (e.g., when the "wakeup-source" property is also provided).
-
- Supported values are defined in linux-event-codes.h:
-
- EV_ACT_ANY - both asserted and deasserted
- EV_ACT_ASSERTED - asserted
- EV_ACT_DEASSERTED - deasserted
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2]
-
- linux,can-disable:
- description:
- Indicates that button is connected to dedicated (not shared) interrupt
- which can be disabled to suppress events from the button.
- type: boolean
-
- required:
- - linux,code
-
- anyOf:
- - required:
- - interrupts
- - required:
- - gpios
-
- dependencies:
- wakeup-event-action: [ wakeup-source ]
- linux,input-value: [ gpios ]
-
- unevaluatedProperties: false
+ "^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$":
+ $ref: input.yaml#
+
+ properties:
+ gpios:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ label:
+ description: Descriptive name of the key.
+
+ linux,code:
+ description: Key / Axis code to emit.
+
+ linux,input-type:
+ default: 1 # EV_KEY
+
+ linux,input-value:
+ description: |
+ If linux,input-type is EV_ABS or EV_REL then this
+ value is sent for events this button generates when pressed.
+ EV_ABS/EV_REL axis will generate an event with a value of 0
+ when all buttons with linux,input-type == type and
+ linux,code == axis are released. This value is interpreted
+ as a signed 32 bit value, e.g. to make a button generate a
+ value of -1 use:
+
+ linux,input-value = <0xffffffff>; /* -1 */
+
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ debounce-interval:
+ description:
+ Debouncing interval time in milliseconds. If not specified defaults to 5.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ default: 5
+
+ wakeup-source:
+ description: Button can wake-up the system.
+
+ wakeup-event-action:
+ description: |
+ Specifies whether the key should wake the system when asserted, when
+ deasserted, or both. This property is only valid for keys that wake up the
+ system (e.g., when the "wakeup-source" property is also provided).
+
+ Supported values are defined in linux-event-codes.h:
+
+ EV_ACT_ANY - both asserted and deasserted
+ EV_ACT_ASSERTED - asserted
+ EV_ACT_DEASSERTED - deasserted
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+ linux,can-disable:
+ description:
+ Indicates that button is connected to dedicated (not shared) interrupt
+ which can be disabled to suppress events from the button.
+ type: boolean
+
+ required:
+ - linux,code
+
+ anyOf:
+ - required:
+ - interrupts
+ - required:
+ - gpios
+
+ dependencies:
+ wakeup-event-action: [ wakeup-source ]
+ linux,input-value: [ gpios ]
+
+ unevaluatedProperties: false
if:
properties:
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 02/40] dt-bindings: input: gpio-keys: reference input.yaml and document properties
2022-06-16 0:52 ` Krzysztof Kozlowski
` (2 preceding siblings ...)
(?)
@ 2022-06-16 0:52 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Dmitry Torokhov,
Rob Herring, Krzysztof Kozlowski, linux-input, devicetree,
linux-kernel
Cc: Krzysztof Kozlowski, Rob Herring
The original text bindings documented "autorepeat" and "label"
properties (in the device node, beside the nodes with keys). DTS use
also poll-interval. Reference the input.yaml to get these top-level
properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/input/gpio-keys.yaml | 32 +++++++++++--------
1 file changed, 19 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index 27bb5c6ab8d9..e722e681d237 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -15,6 +15,13 @@ properties:
- gpio-keys
- gpio-keys-polled
+ autorepeat: true
+
+ label:
+ description: Name of entire device
+
+ poll-interval: true
+
patternProperties:
"^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$":
$ref: input.yaml#
@@ -94,19 +101,18 @@ patternProperties:
unevaluatedProperties: false
-if:
- properties:
- compatible:
- const: gpio-keys-polled
-then:
- properties:
- poll-interval:
- description:
- Poll interval time in milliseconds
- $ref: /schemas/types.yaml#/definitions/uint32
-
- required:
- - poll-interval
+allOf:
+ - $ref: input.yaml#
+ - if:
+ properties:
+ compatible:
+ const: gpio-keys-polled
+ then:
+ required:
+ - poll-interval
+ else:
+ properties:
+ poll-interval: false
additionalProperties: false
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 03/40] dt-bindings: input: gpio-keys: accept also interrupt-extended
2022-06-16 0:52 ` Krzysztof Kozlowski
` (3 preceding siblings ...)
(?)
@ 2022-06-16 0:52 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Dmitry Torokhov,
Rob Herring, Krzysztof Kozlowski, linux-input, devicetree,
linux-kernel
Cc: Krzysztof Kozlowski, Rob Herring
Each key device node might have interrupts-extended instead of
interrupts property:
fsl-ls1028a-kontron-sl28-var1.dtb: buttons0: power-button: 'anyOf' conditional failed, one must be fixed:
'interrupts' is a required property
'gpios' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/input/gpio-keys.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index e722e681d237..17ac9dff7972 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -92,6 +92,8 @@ patternProperties:
anyOf:
- required:
- interrupts
+ - required:
+ - interrupts-extended
- required:
- gpios
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
2022-06-16 0:52 ` Krzysztof Kozlowski
` (4 preceding siblings ...)
(?)
@ 2022-06-16 0:52 ` Krzysztof Kozlowski
2022-06-25 23:28 ` Linus Walleij
` (2 more replies)
-1 siblings, 3 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson,
Jonathan Neuschäfer, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, openbmc, linux-gpio, devicetree,
linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys schema requires keys to have more generic name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v2:
1. Name it "button-uid"
---
.../devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
index 47a56b83a610..7a11beb8f222 100644
--- a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
@@ -152,7 +152,7 @@ examples:
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uid>, <&pinmux_uid>;
- uid {
+ button-uid {
label = "UID";
linux,code = <102>;
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 05/40] arm64: dts: apm: correct gpio-keys properties
2022-06-16 0:52 ` Krzysztof Kozlowski
` (5 preceding siblings ...)
(?)
@ 2022-06-16 0:52 ` Krzysztof Kozlowski
2022-06-20 11:14 ` (subset) " Krzysztof Kozlowski
-1 siblings, 1 reply; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Khuong Dinh,
Rob Herring, Krzysztof Kozlowski, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/apm/apm-merlin.dts | 2 +-
arch/arm64/boot/dts/apm/apm-mustang.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts
index 217d7728b63a..049e7a5edca7 100644
--- a/arch/arm64/boot/dts/apm/apm-merlin.dts
+++ b/arch/arm64/boot/dts/apm/apm-merlin.dts
@@ -22,7 +22,7 @@ memory {
gpio-keys {
compatible = "gpio-keys";
- button@1 {
+ button {
label = "POWER";
linux,code = <116>;
linux,input-type = <0x1>;
diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
index e927811ade28..efac50aeca64 100644
--- a/arch/arm64/boot/dts/apm/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -22,7 +22,7 @@ memory {
gpio-keys {
compatible = "gpio-keys";
- button@1 {
+ button {
label = "POWER";
linux,code = <116>;
linux,input-type = <0x1>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 06/40] arm64: dts: broadcom: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
` (6 preceding siblings ...)
(?)
@ 2022-06-16 0:52 ` Krzysztof Kozlowski
2022-06-20 11:14 ` (subset) " Krzysztof Kozlowski
-1 siblings, 1 reply; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts | 8 ++++----
.../boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
index b63eefab48bd..064f7f549665 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
@@ -83,25 +83,25 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <100>;
- brightness {
+ key-brightness {
label = "LEDs";
linux,code = <KEY_BRIGHTNESS_ZERO>;
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
- wps {
+ key-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
- wifi {
+ key-wifi {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
- restart {
+ key-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 169fbb7cfd34..04f8524b5335 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -18,25 +18,25 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <100>;
- wifi {
+ key-wifi {
label = "WiFi";
linux,code = <KEY_RFKILL>;
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
- wps {
+ key-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
- restart {
+ key-restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
};
- brightness {
+ key-brightness {
label = "LEDs";
linux,code = <KEY_BRIGHTNESS_ZERO>;
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 07/40] arm64: dts: freescale: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Shawn Guo, Li Yang,
Rob Herring, Krzysztof Kozlowski, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 2 +-
.../arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi | 2 +-
arch/arm64/boot/dts/freescale/mba8mx.dtsi | 6 +++---
15 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index d3f03dcbb8c3..aa38f5379558 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -35,14 +35,14 @@ buttons {
* external power off (e.g ATX Power Button)
* asserted
*/
- powerdn {
+ button-powerdn {
label = "External Power Down";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
/* Rear Panel 'ADMIN' button (GPIO_H) */
- admin {
+ button-admin {
label = "ADMIN button";
gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
index ac1fe1530ac7..d643381417f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -36,19 +36,19 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Back";
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- home {
+ key-home {
label = "Home";
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index 8a496aa09072..66a0d103c90f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -16,13 +16,13 @@ memory@40000000 {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -36,14 +36,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 24737e89038a..35fb929e7bcc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -38,13 +38,13 @@ memory@40000000 {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -58,14 +58,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 407ab4592b4c..79107e287d92 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -42,13 +42,13 @@ can20m: can20m {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -62,14 +62,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index a7dae9bd4c11..a65761a53f23 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -33,13 +33,13 @@ memory@40000000 {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -53,7 +53,7 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index eafa88d980b3..a8c329cb4c28 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -43,7 +43,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- wakeup {
+ key-wakeup {
debounce-interval = <10>;
/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
index f61c48776cf3..3ed7021a487c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -26,19 +26,19 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Back";
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- home {
+ key-home {
label = "Home";
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 367a232675aa..636f8602b979 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -39,13 +39,13 @@ can20m: can20m {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -59,14 +59,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index fb17e329cd37..8c38f89df0ad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -49,7 +49,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- wakeup {
+ button-wakeup {
debounce-interval = <10>;
/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index b86f188a440d..6445c6b90b5b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -36,21 +36,21 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- btn1 {
+ button-1 {
label = "VOL_UP";
gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <KEY_VOLUMEUP>;
};
- btn2 {
+ button-2 {
label = "VOL_DOWN";
gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <KEY_VOLUMEDOWN>;
};
- wwan-wake {
+ button-3 {
label = "WWAN_WAKE";
gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 587e55aaa57b..9eec8a7eecfc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -37,7 +37,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_keys>;
- vol-down {
+ key-vol-down {
label = "VOL_DOWN";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
@@ -45,7 +45,7 @@ vol-down {
wakeup-source;
};
- vol-up {
+ key-vol-up {
label = "VOL_UP";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index a89546b39095..9dda2a1554c3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -26,7 +26,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ button-power {
label = "Power Button";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
index e3f161a10448..a08e70fb7c7a 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
@@ -16,7 +16,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiokeys>;
- wakeup {
+ key-wakeup {
label = "Wake-Up";
gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index c2f0f1a1566c..aab1aee49893 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -26,21 +26,21 @@ gpio-keys {
pinctrl-0 = <&pinctrl_gpiobutton>;
autorepeat;
- switch1 {
+ switch-1 {
label = "switch1";
linux,code = <BTN_0>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- btn2: switch2 {
+ btn2: switch-2 {
label = "switch2";
linux,code = <BTN_1>;
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- switch3 {
+ switch-3 {
label = "switch3";
linux,code = <BTN_2>;
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 07/40] arm64: dts: freescale: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Shawn Guo, Li Yang,
Rob Herring, Krzysztof Kozlowski, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts | 8 ++++----
arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 2 +-
.../arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi | 2 +-
arch/arm64/boot/dts/freescale/mba8mx.dtsi | 6 +++---
15 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index d3f03dcbb8c3..aa38f5379558 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -35,14 +35,14 @@ buttons {
* external power off (e.g ATX Power Button)
* asserted
*/
- powerdn {
+ button-powerdn {
label = "External Power Down";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
/* Rear Panel 'ADMIN' button (GPIO_H) */
- admin {
+ button-admin {
label = "ADMIN button";
gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
index ac1fe1530ac7..d643381417f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -36,19 +36,19 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Back";
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- home {
+ key-home {
label = "Home";
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index 8a496aa09072..66a0d103c90f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -16,13 +16,13 @@ memory@40000000 {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -36,14 +36,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 24737e89038a..35fb929e7bcc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -38,13 +38,13 @@ memory@40000000 {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -58,14 +58,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 407ab4592b4c..79107e287d92 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -42,13 +42,13 @@ can20m: can20m {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -62,14 +62,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index a7dae9bd4c11..a65761a53f23 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -33,13 +33,13 @@ memory@40000000 {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -53,7 +53,7 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index eafa88d980b3..a8c329cb4c28 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -43,7 +43,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- wakeup {
+ key-wakeup {
debounce-interval = <10>;
/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
index f61c48776cf3..3ed7021a487c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -26,19 +26,19 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Back";
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- home {
+ key-home {
label = "Home";
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 367a232675aa..636f8602b979 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -39,13 +39,13 @@ can20m: can20m {
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -59,14 +59,14 @@ key-erased {
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index fb17e329cd37..8c38f89df0ad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -49,7 +49,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- wakeup {
+ button-wakeup {
debounce-interval = <10>;
/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index b86f188a440d..6445c6b90b5b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -36,21 +36,21 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- btn1 {
+ button-1 {
label = "VOL_UP";
gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <KEY_VOLUMEUP>;
};
- btn2 {
+ button-2 {
label = "VOL_DOWN";
gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
wakeup-source;
linux,code = <KEY_VOLUMEDOWN>;
};
- wwan-wake {
+ button-3 {
label = "WWAN_WAKE";
gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio3>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 587e55aaa57b..9eec8a7eecfc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -37,7 +37,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_keys>;
- vol-down {
+ key-vol-down {
label = "VOL_DOWN";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
@@ -45,7 +45,7 @@ vol-down {
wakeup-source;
};
- vol-up {
+ key-vol-up {
label = "VOL_UP";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index a89546b39095..9dda2a1554c3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -26,7 +26,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- power {
+ button-power {
label = "Power Button";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
index e3f161a10448..a08e70fb7c7a 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
@@ -16,7 +16,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiokeys>;
- wakeup {
+ key-wakeup {
label = "Wake-Up";
gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index c2f0f1a1566c..aab1aee49893 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -26,21 +26,21 @@ gpio-keys {
pinctrl-0 = <&pinctrl_gpiobutton>;
autorepeat;
- switch1 {
+ switch-1 {
label = "switch1";
linux,code = <BTN_0>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- btn2: switch2 {
+ btn2: switch-2 {
label = "switch2";
linux,code = <BTN_1>;
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- switch3 {
+ switch-3 {
label = "switch3";
linux,code = <BTN_2>;
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 08/40] arm64: dts: freescale: align led node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Shawn Guo, Li Yang,
Rob Herring, Krzysztof Kozlowski, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
with 'led'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 4 ++--
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index aa38f5379558..ef6c8967533e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -52,17 +52,17 @@ button-admin {
leds {
compatible = "gpio-leds";
- sfp1down {
+ led-0 {
label = "ten64:green:sfp1:down";
gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
};
- sfp2up {
+ led-1 {
label = "ten64:green:sfp2:up";
gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
};
- admin {
+ led-2 {
label = "ten64:admin";
gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
index 92eaf4ef4563..c97f4e06ae5f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -20,13 +20,13 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- user1 {
+ led-1 {
label = "TestLed601";
gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
- user2 {
+ led-2 {
label = "TestLed602";
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 08/40] arm64: dts: freescale: align led node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Shawn Guo, Li Yang,
Rob Herring, Krzysztof Kozlowski, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
with 'led'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 4 ++--
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index aa38f5379558..ef6c8967533e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -52,17 +52,17 @@ button-admin {
leds {
compatible = "gpio-leds";
- sfp1down {
+ led-0 {
label = "ten64:green:sfp1:down";
gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
};
- sfp2up {
+ led-1 {
label = "ten64:green:sfp2:up";
gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
};
- admin {
+ led-2 {
label = "ten64:admin";
gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
index 92eaf4ef4563..c97f4e06ae5f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -20,13 +20,13 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- user1 {
+ led-1 {
label = "TestLed601";
gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
- user2 {
+ led-2 {
label = "TestLed602";
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 09/40] arm64: dts: hisilicon: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Wei Xu, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 2 +-
arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index f68580dc87d8..0fe0542bf40e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -74,7 +74,7 @@ keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index 40f3e00ac832..ad53066ac495 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -27,12 +27,12 @@ chosen {
stdout-path = "serial0:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- pwrbutton {
+ pwr-button {
label = "Power Button";
gpios = <&porta 8 GPIO_ACTIVE_LOW>;
linux,code = <116>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 09/40] arm64: dts: hisilicon: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Wei Xu, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 2 +-
arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index f68580dc87d8..0fe0542bf40e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -74,7 +74,7 @@ keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index 40f3e00ac832..ad53066ac495 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -27,12 +27,12 @@ chosen {
stdout-path = "serial0:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- pwrbutton {
+ pwr-button {
label = "Power Button";
gpios = <&porta 8 GPIO_ACTIVE_LOW>;
linux,code = <116>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 10/40] arm64: dts: hisilicon: correct gpio-keys properties
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Wei Xu, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index ad53066ac495..c4eaebbb448f 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -29,8 +29,6 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pwr-button {
label = "Power Button";
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 10/40] arm64: dts: hisilicon: correct gpio-keys properties
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Wei Xu, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index ad53066ac495..c4eaebbb448f 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -29,8 +29,6 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pwr-button {
label = "Power Button";
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 11/40] arm64: dts: marvell: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index caf9c8529fca..6721b9b4cf5c 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -45,7 +45,7 @@ red {
gpio-keys {
compatible = "gpio-keys";
- reset {
+ key-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 871f84b4a6ed..15f6ca4df121 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -94,7 +94,7 @@ keys {
pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear button */
label = "Rear Button";
gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>;
@@ -102,7 +102,7 @@ button_0 {
linux,code = <BTN_0>;
};
- button_1 {
+ button-1 {
/* The wps button */
label = "WPS Button";
gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 11/40] arm64: dts: marvell: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index caf9c8529fca..6721b9b4cf5c 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -45,7 +45,7 @@ red {
gpio-keys {
compatible = "gpio-keys";
- reset {
+ key-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 871f84b4a6ed..15f6ca4df121 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -94,7 +94,7 @@ keys {
pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear button */
label = "Rear Button";
gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>;
@@ -102,7 +102,7 @@ button_0 {
linux,code = <BTN_0>;
};
- button_1 {
+ button-1 {
/* The wps button */
label = "WPS Button";
gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 12/40] arm64: dts: marvell: armada-3720: align lednode names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
with 'led'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 6721b9b4cf5c..de8d0cfa4cb4 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -35,7 +35,7 @@ memory@0 {
leds {
compatible = "gpio-leds";
- red {
+ led {
label = "mox:red:activity";
gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 12/40] arm64: dts: marvell: armada-3720: align lednode names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
with 'led'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 6721b9b4cf5c..de8d0cfa4cb4 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -35,7 +35,7 @@ memory@0 {
leds {
compatible = "gpio-leds";
- red {
+ led {
label = "mox:red:activity";
gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "default-on";
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 13/40] ARM: dts: marvell: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, Russell King, linux-arm-kernel, devicetree,
linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/armada-370-c200-v2.dts | 8 ++++----
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 6 +++---
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 6 +++---
arch/arm/boot/dts/armada-381-netgear-gs110emx.dts | 2 +-
arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi | 4 ++--
arch/arm/boot/dts/armada-385-linksys.dtsi | 4 ++--
arch/arm/boot/dts/armada-388-clearfog-base.dts | 2 +-
arch/arm/boot/dts/armada-388-clearfog.dts | 2 +-
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 4 ++--
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 6 +++---
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 4 ++--
11 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/armada-370-c200-v2.dts
index 1a4a09bdde63..84d40e1d70ef 100644
--- a/arch/arm/boot/dts/armada-370-c200-v2.dts
+++ b/arch/arm/boot/dts/armada-370-c200-v2.dts
@@ -75,25 +75,25 @@ keys {
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
- power {
+ button-power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
- usb1 {
+ button-usb1 {
label = "USB1 Button";
linux,code = <BTN_0>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ button-usb2 {
label = "USB2 Button";
linux,code = <BTN_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index b52634ecf1d9..cf7bffdd1c21 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -111,19 +111,19 @@ gpio-keys {
#address-cells = <1>;
#size-cells = <0>;
- power {
+ button-power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- backup {
+ button-backup {
label = "Backup button";
linux,code = <KEY_OPTION>;
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 0abac5ffe45a..6c33e3ba4ffb 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -86,19 +86,19 @@ gpio-keys {
#address-cells = <1>;
#size-cells = <0>;
- power {
+ button-power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
debounce-interval = <100>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- button {
+ button-usb {
label = "USB VBUS error";
linux,code = <KEY_UNKNOWN>;
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
index 396172067f6a..095df5567c93 100644
--- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
@@ -24,7 +24,7 @@ gpio-keys {
pinctrl-0 = <&front_button_pins>;
pinctrl-names = "default";
- factory_default {
+ key-factory-default {
label = "Factory Default";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
index 10ad46f29393..d1452a04e904 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
@@ -256,14 +256,14 @@ gpio-keys {
pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
label = "Rear Button";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
linux,can-disable;
linux,code = <BTN_0>;
};
- button_1 {
+ button-1 {
label = "Front Button";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
linux,can-disable;
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index fb9c8a0b241c..116aca5e688f 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -53,13 +53,13 @@ gpio_keys: gpio-keys {
pinctrl-0 = <&gpio_keys_pins>;
pinctrl-names = "default";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts
index 53b4bd35522a..f7daa3bc707e 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
@@ -19,7 +19,7 @@ gpio-keys {
pinctrl-0 = <&rear_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear SW3 button */
label = "Rear Button";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 4140a5303b48..95299167dcf5 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -35,7 +35,7 @@ gpio-keys {
pinctrl-0 = <&rear_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear SW3 button */
label = "Rear Button";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 3e77b4337802..86a0ad9bd5cc 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -69,14 +69,14 @@ ethernet@74000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_SETUP>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 36932e3b781a..51b2eb8bb4fd 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -172,20 +172,20 @@ bm-bppi {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 0efcc166dabf..ff698d6ebb87 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -97,12 +97,12 @@ green_led {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- init {
+ button-init {
label = "Init Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 13/40] ARM: dts: marvell: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, Russell King, linux-arm-kernel, devicetree,
linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/armada-370-c200-v2.dts | 8 ++++----
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 6 +++---
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 6 +++---
arch/arm/boot/dts/armada-381-netgear-gs110emx.dts | 2 +-
arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi | 4 ++--
arch/arm/boot/dts/armada-385-linksys.dtsi | 4 ++--
arch/arm/boot/dts/armada-388-clearfog-base.dts | 2 +-
arch/arm/boot/dts/armada-388-clearfog.dts | 2 +-
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 4 ++--
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 6 +++---
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 4 ++--
11 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/armada-370-c200-v2.dts
index 1a4a09bdde63..84d40e1d70ef 100644
--- a/arch/arm/boot/dts/armada-370-c200-v2.dts
+++ b/arch/arm/boot/dts/armada-370-c200-v2.dts
@@ -75,25 +75,25 @@ keys {
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
- power {
+ button-power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
- usb1 {
+ button-usb1 {
label = "USB1 Button";
linux,code = <BTN_0>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
- usb2 {
+ button-usb2 {
label = "USB2 Button";
linux,code = <BTN_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index b52634ecf1d9..cf7bffdd1c21 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -111,19 +111,19 @@ gpio-keys {
#address-cells = <1>;
#size-cells = <0>;
- power {
+ button-power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- backup {
+ button-backup {
label = "Backup button";
linux,code = <KEY_OPTION>;
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 0abac5ffe45a..6c33e3ba4ffb 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -86,19 +86,19 @@ gpio-keys {
#address-cells = <1>;
#size-cells = <0>;
- power {
+ button-power {
label = "Power button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
debounce-interval = <100>;
};
- reset {
+ button-reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
debounce-interval = <100>;
};
- button {
+ button-usb {
label = "USB VBUS error";
linux,code = <KEY_UNKNOWN>;
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
index 396172067f6a..095df5567c93 100644
--- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
@@ -24,7 +24,7 @@ gpio-keys {
pinctrl-0 = <&front_button_pins>;
pinctrl-names = "default";
- factory_default {
+ key-factory-default {
label = "Factory Default";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
index 10ad46f29393..d1452a04e904 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
@@ -256,14 +256,14 @@ gpio-keys {
pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
label = "Rear Button";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
linux,can-disable;
linux,code = <BTN_0>;
};
- button_1 {
+ button-1 {
label = "Front Button";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
linux,can-disable;
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index fb9c8a0b241c..116aca5e688f 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -53,13 +53,13 @@ gpio_keys: gpio-keys {
pinctrl-0 = <&gpio_keys_pins>;
pinctrl-names = "default";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts
index 53b4bd35522a..f7daa3bc707e 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
@@ -19,7 +19,7 @@ gpio-keys {
pinctrl-0 = <&rear_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear SW3 button */
label = "Rear Button";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 4140a5303b48..95299167dcf5 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -35,7 +35,7 @@ gpio-keys {
pinctrl-0 = <&rear_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear SW3 button */
label = "Rear Button";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 3e77b4337802..86a0ad9bd5cc 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -69,14 +69,14 @@ ethernet@74000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_SETUP>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 36932e3b781a..51b2eb8bb4fd 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -172,20 +172,20 @@ bm-bppi {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
- wps {
+ button-wps {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
- reset {
+ button-reset {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 0efcc166dabf..ff698d6ebb87 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -97,12 +97,12 @@ green_led {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- init {
+ button-init {
label = "Init Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 14/40] ARM: dts: marvell: correct gpio-keys properties
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/armada-370-rd.dts | 2 --
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 2 --
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 2 --
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 2 --
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 2 --
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 --
6 files changed, 12 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index c910d157a686..6ba7699b69ed 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -84,8 +84,6 @@ usb@51000 {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button {
label = "Software Button";
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index cf7bffdd1c21..866b8630d407 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -108,8 +108,6 @@ gpio-fan {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-power {
label = "Power button";
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 6c33e3ba4ffb..702a85af2078 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -83,8 +83,6 @@ regulator@1 {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-power {
label = "Power button";
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 86a0ad9bd5cc..5a74197be0ad 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -71,8 +71,6 @@ ethernet@74000 {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 51b2eb8bb4fd..622ac40dd164 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -174,8 +174,6 @@ bm-bppi {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index ff698d6ebb87..1ecf72a61bca 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -99,8 +99,6 @@ green_led {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-init {
label = "Init Button";
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 14/40] ARM: dts: marvell: correct gpio-keys properties
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/armada-370-rd.dts | 2 --
arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 2 --
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi | 2 --
arch/arm/boot/dts/armada-xp-axpwifiap.dts | 2 --
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 2 --
arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 --
6 files changed, 12 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index c910d157a686..6ba7699b69ed 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -84,8 +84,6 @@ usb@51000 {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button {
label = "Software Button";
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
index cf7bffdd1c21..866b8630d407 100644
--- a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -108,8 +108,6 @@ gpio-fan {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-power {
label = "Power button";
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index 6c33e3ba4ffb..702a85af2078 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -83,8 +83,6 @@ regulator@1 {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-power {
label = "Power button";
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 86a0ad9bd5cc..5a74197be0ad 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -71,8 +71,6 @@ ethernet@74000 {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 51b2eb8bb4fd..622ac40dd164 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -174,8 +174,6 @@ bm-bppi {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index ff698d6ebb87..1ecf72a61bca 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -99,8 +99,6 @@ green_led {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-init {
label = "Init Button";
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 15/40] arm64: dts: mediatek: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Matthias Brugger, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++--
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 4 ++--
arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts | 6 +++---
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 10 +++++-----
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 4 ++--
arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi | 2 +-
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 2 +-
arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 4 ++--
8 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 2b9bf8dd14ec..c2311733d2de 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -40,13 +40,13 @@ cpu@1 {
gpio-keys {
compatible = "gpio-keys";
- factory {
+ factory-key {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
};
- wps {
+ wps-key {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 596c073d8b05..c28da9323a9c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -42,13 +42,13 @@ gpio-keys {
compatible = "gpio-keys";
poll-interval = <100>;
- factory {
+ key-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 0 0>;
};
- wps {
+ key-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 102 0>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
index 44f6149c1307..28433b94f7c7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
@@ -21,7 +21,7 @@ cpu_crit: cpu_crit0 {
};
&gpio_keys {
- /delete-node/tablet_mode;
- /delete-node/volume_down;
- /delete-node/volume_up;
+ /delete-node/switch-tablet-mode;
+ /delete-node/switch-volume-down;
+ /delete-node/switch-volume-up;
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 9c75fbb31f98..d20378758213 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -53,7 +53,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pins>;
- lid {
+ switch-lid {
label = "Lid";
gpios = <&pio 69 GPIO_ACTIVE_LOW>;
linux,code = <SW_LID>;
@@ -61,7 +61,7 @@ lid {
gpio-key,wakeup;
};
- power {
+ switch-power {
label = "Power";
gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
@@ -69,7 +69,7 @@ power {
gpio-key,wakeup;
};
- tablet_mode {
+ switch-tablet-mode {
label = "Tablet_mode";
gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
linux,code = <SW_TABLET_MODE>;
@@ -77,13 +77,13 @@ tablet_mode {
gpio-key,wakeup;
};
- volume_down {
+ switch-volume-down {
label = "Volume_down";
gpios = <&pio 123 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ switch-volume-up {
label = "Volume_up";
gpios = <&pio 124 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 2d7a193272ae..3ac83be53627 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -73,7 +73,7 @@ volume_buttons: volume-buttons {
pinctrl-names = "default";
pinctrl-0 = <&volume_button_pins>;
- volume_down {
+ button-volume-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
@@ -81,7 +81,7 @@ volume_down {
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
};
- volume_up {
+ button-volume-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <100>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index 28966a65391b..50a0dd36b5fb 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -45,7 +45,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pen_eject>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index b035e06840e6..b50261e8b9ed 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -144,7 +144,7 @@ wifi_wakeup: wifi-wakeup {
pinctrl-names = "default";
pinctrl-0 = <&wifi_pins_wakeup>;
- wowlan {
+ button-wowlan {
label = "Wake on WiFi";
gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 7a717f926929..8ee1529683a3 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -28,7 +28,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
- volume-up {
+ key-volume-up {
gpios = <&pio 42 GPIO_ACTIVE_LOW>;
label = "volume_up";
linux,code = <115>;
@@ -36,7 +36,7 @@ volume-up {
debounce-interval = <15>;
};
- volume-down {
+ key-volume-down {
gpios = <&pio 43 GPIO_ACTIVE_LOW>;
label = "volume_down";
linux,code = <114>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 15/40] arm64: dts: mediatek: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Matthias Brugger, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++--
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 4 ++--
arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts | 6 +++---
arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 10 +++++-----
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 4 ++--
arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi | 2 +-
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 2 +-
arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 4 ++--
8 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 2b9bf8dd14ec..c2311733d2de 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -40,13 +40,13 @@ cpu@1 {
gpio-keys {
compatible = "gpio-keys";
- factory {
+ factory-key {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
};
- wps {
+ wps-key {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 596c073d8b05..c28da9323a9c 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -42,13 +42,13 @@ gpio-keys {
compatible = "gpio-keys";
poll-interval = <100>;
- factory {
+ key-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 0 0>;
};
- wps {
+ key-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 102 0>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
index 44f6149c1307..28433b94f7c7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
@@ -21,7 +21,7 @@ cpu_crit: cpu_crit0 {
};
&gpio_keys {
- /delete-node/tablet_mode;
- /delete-node/volume_down;
- /delete-node/volume_up;
+ /delete-node/switch-tablet-mode;
+ /delete-node/switch-volume-down;
+ /delete-node/switch-volume-up;
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
index 9c75fbb31f98..d20378758213 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
@@ -53,7 +53,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pins>;
- lid {
+ switch-lid {
label = "Lid";
gpios = <&pio 69 GPIO_ACTIVE_LOW>;
linux,code = <SW_LID>;
@@ -61,7 +61,7 @@ lid {
gpio-key,wakeup;
};
- power {
+ switch-power {
label = "Power";
gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
@@ -69,7 +69,7 @@ power {
gpio-key,wakeup;
};
- tablet_mode {
+ switch-tablet-mode {
label = "Tablet_mode";
gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
linux,code = <SW_TABLET_MODE>;
@@ -77,13 +77,13 @@ tablet_mode {
gpio-key,wakeup;
};
- volume_down {
+ switch-volume-down {
label = "Volume_down";
gpios = <&pio 123 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ switch-volume-up {
label = "Volume_up";
gpios = <&pio 124 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 2d7a193272ae..3ac83be53627 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -73,7 +73,7 @@ volume_buttons: volume-buttons {
pinctrl-names = "default";
pinctrl-0 = <&volume_button_pins>;
- volume_down {
+ button-volume-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
@@ -81,7 +81,7 @@ volume_down {
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
};
- volume_up {
+ button-volume-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <100>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index 28966a65391b..50a0dd36b5fb 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -45,7 +45,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pen_eject>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&pio 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index b035e06840e6..b50261e8b9ed 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -144,7 +144,7 @@ wifi_wakeup: wifi-wakeup {
pinctrl-names = "default";
pinctrl-0 = <&wifi_pins_wakeup>;
- wowlan {
+ button-wowlan {
label = "Wake on WiFi";
gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 7a717f926929..8ee1529683a3 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -28,7 +28,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
- volume-up {
+ key-volume-up {
gpios = <&pio 42 GPIO_ACTIVE_LOW>;
label = "volume_up";
linux,code = <115>;
@@ -36,7 +36,7 @@ volume-up {
debounce-interval = <15>;
};
- volume-down {
+ key-volume-down {
gpios = <&pio 43 GPIO_ACTIVE_LOW>;
label = "volume_down";
linux,code = <114>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 16/40] arm64: dts: mediatek: mt7622-bananapi-bpi-r64: align led node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Matthias Brugger, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
with 'led'. Use generic color properties instead of the node name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index c2311733d2de..7d1ecf72a6c3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include "mt7622.dtsi"
#include "mt6380.dtsi"
@@ -56,14 +57,16 @@ wps-key {
leds {
compatible = "gpio-leds";
- green {
+ led-0 {
label = "bpi-r64:pio:green";
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- red {
+ led-1 {
label = "bpi-r64:pio:red";
+ color = <LED_COLOR_ID_RED>;
gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 16/40] arm64: dts: mediatek: mt7622-bananapi-bpi-r64: align led node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Matthias Brugger, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
with 'led'. Use generic color properties instead of the node name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index c2311733d2de..7d1ecf72a6c3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
#include "mt7622.dtsi"
#include "mt6380.dtsi"
@@ -56,14 +57,16 @@ wps-key {
leds {
compatible = "gpio-leds";
- green {
+ led-0 {
label = "bpi-r64:pio:green";
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- red {
+ led-1 {
label = "bpi-r64:pio:red";
+ color = <LED_COLOR_ID_RED>;
gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 17/40] arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Matthias Brugger, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index c28da9323a9c..1a86857c9027 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -40,7 +40,6 @@ cpu@1 {
gpio-keys {
compatible = "gpio-keys";
- poll-interval = <100>;
key-factory {
label = "factory";
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 17/40] arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Matthias Brugger, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index c28da9323a9c..1a86857c9027 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -40,7 +40,6 @@ cpu@1 {
gpio-keys {
compatible = "gpio-keys";
- poll-interval = <100>;
key-factory {
label = "factory";
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 18/40] ARM: dts: mediatek: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Matthias Brugger, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 4 ++--
arch/arm/boot/dts/mt7623a-rfb-nand.dts | 4 ++--
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 4 ++--
arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 4 ++--
arch/arm/boot/dts/mt7629-rfb.dts | 4 ++--
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
index 13c86936d1c8..e8b4b6d30d19 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
@@ -45,13 +45,13 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
index 88d8f0b2f4c2..61f5da68d4b0 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
@@ -45,13 +45,13 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 027c1b0c6a98..5008115d2494 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -91,13 +91,13 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index 1b9b9a8145a7..bf67a8e9be59 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -60,13 +60,13 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
index eb536cbebd9b..84e14bee7235 100644
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -23,13 +23,13 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- reset {
+ button-reset {
label = "factory";
linux,code = <KEY_RESTART>;
gpios = <&pio 60 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 58 GPIO_ACTIVE_LOW>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 18/40] ARM: dts: mediatek: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Matthias Brugger, devicetree,
linux-arm-kernel, linux-mediatek, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 4 ++--
arch/arm/boot/dts/mt7623a-rfb-nand.dts | 4 ++--
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 4 ++--
arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 4 ++--
arch/arm/boot/dts/mt7629-rfb.dts | 4 ++--
5 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
index 13c86936d1c8..e8b4b6d30d19 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
@@ -45,13 +45,13 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
index 88d8f0b2f4c2..61f5da68d4b0 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
@@ -45,13 +45,13 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 027c1b0c6a98..5008115d2494 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -91,13 +91,13 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index 1b9b9a8145a7..bf67a8e9be59 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -60,13 +60,13 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&key_pins_a>;
- factory {
+ button-factory {
label = "factory";
linux,code = <BTN_0>;
gpios = <&pio 256 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
index eb536cbebd9b..84e14bee7235 100644
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -23,13 +23,13 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- reset {
+ button-reset {
label = "factory";
linux,code = <KEY_RESTART>;
gpios = <&pio 60 GPIO_ACTIVE_LOW>;
};
- wps {
+ button-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&pio 58 GPIO_ACTIVE_LOW>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 19/40] arm64: dts: tegra: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
` (19 preceding siblings ...)
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-24 16:08 ` Thierry Reding
-1 siblings, 1 reply; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Thierry Reding, Jonathan Hunter, devicetree,
linux-tegra, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 4 ++--
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 6 +++---
.../boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts | 6 +++---
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 4 ++--
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi | 4 ++--
arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 6 +++---
arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 2 +-
arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 4 ++--
arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 10 +++++-----
.../boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 6 +++---
10 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index f16acb4cabaa..62d58221ad3c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -1030,7 +1030,7 @@ clk32k_in: clock-32k {
gpio-keys {
compatible = "gpio-keys";
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <5>;
@@ -1039,7 +1039,7 @@ lid {
wakeup-source;
};
- power {
+ switch-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index bd1897707fcc..47cf2013afcc 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -2478,7 +2478,7 @@ sata@3507000 {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
GPIO_ACTIVE_LOW>;
@@ -2489,7 +2489,7 @@ power {
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
GPIO_ACTIVE_LOW>;
@@ -2498,7 +2498,7 @@ volume-up {
debounce-interval = <10>;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
index 7e9aad9ff177..3e83a4d52eb1 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -360,7 +360,7 @@ fan: pwm-fan {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 0)
GPIO_ACTIVE_LOW>;
@@ -371,7 +371,7 @@ power {
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 1)
GPIO_ACTIVE_LOW>;
@@ -380,7 +380,7 @@ volume-up {
debounce-interval = <10>;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio_aon TEGRA186_AON_GPIO(FF, 2)
GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index fafd7073d18c..bc1041d11f6d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -2258,7 +2258,7 @@ fan: pwm-fan {
gpio-keys {
compatible = "gpio-keys";
- force-recovery {
+ key-force-recovery {
label = "Force Recovery";
gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
GPIO_ACTIVE_LOW>;
@@ -2267,7 +2267,7 @@ force-recovery {
debounce-interval = <10>;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
index 4cee935e44a5..273a1ef716b6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -2262,7 +2262,7 @@ fan: pwm-fan {
gpio-keys {
compatible = "gpio-keys";
- force-recovery {
+ key-force-recovery {
label = "Force Recovery";
gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
GPIO_ACTIVE_LOW>;
@@ -2271,7 +2271,7 @@ force-recovery {
debounce-interval = <10>;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index 4b43b89a9651..a44c56c1e56e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1530,20 +1530,20 @@ gpio-keys {
compatible = "gpio-keys";
label = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- volume_down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
index 10347b6e6e84..8e657b10569d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
@@ -1596,7 +1596,7 @@ gpio-keys {
compatible = "gpio-keys";
status = "okay";
- power {
+ key-power {
debounce-interval = <30>;
gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
label = "Power";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 749b44cf3ffa..37678c337a34 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -1802,7 +1802,7 @@ cpu-passive {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
@@ -1812,7 +1812,7 @@ power {
wakeup-source;
};
- force-recovery {
+ key-force-recovery {
label = "Force Recovery";
gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index a263d51882ee..8494c7b2961b 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -1756,7 +1756,7 @@ cpu-sleep {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
@@ -1764,7 +1764,7 @@ power {
wakeup-source;
};
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(B, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
@@ -1772,7 +1772,7 @@ lid {
wakeup-source;
};
- tablet_mode {
+ key-tablet-mode {
label = "Tablet Mode";
gpios = <&gpio TEGRA_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
@@ -1780,13 +1780,13 @@ tablet_mode {
wakeup-source;
};
- volume_down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(M, 4) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 3f6c399e3371..02a10bb38562 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2021,14 +2021,14 @@ gpio-keys {
compatible = "gpio-keys";
status = "okay";
- force-recovery {
+ key-force-recovery {
label = "Force Recovery";
gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
linux,code = <BTN_1>;
};
- power-key {
+ key-power {
label = "Power";
gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
@@ -2037,7 +2037,7 @@ power-key {
wakeup-source;
};
- suspend {
+ key-suspend {
label = "Suspend";
gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 20/40] ARM: dts: tegra: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
` (20 preceding siblings ...)
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Thierry Reding, Jonathan Hunter, devicetree,
linux-tegra, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/tegra114-asus-tf701t.dts | 8 ++++----
arch/arm/boot/dts/tegra114-dalmore.dts | 8 ++++----
arch/arm/boot/dts/tegra114-roth.dts | 6 +++---
arch/arm/boot/dts/tegra114-tn7.dts | 6 +++---
arch/arm/boot/dts/tegra124-apalis-eval.dts | 2 +-
arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts | 2 +-
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +-
arch/arm/boot/dts/tegra124-nyan.dtsi | 4 ++--
arch/arm/boot/dts/tegra124-venice2.dts | 2 +-
arch/arm/boot/dts/tegra20-acer-a500-picasso.dts | 8 ++++----
arch/arm/boot/dts/tegra20-asus-tf101.dts | 8 ++++----
arch/arm/boot/dts/tegra20-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra20-colibri-iris.dts | 2 +-
arch/arm/boot/dts/tegra20-harmony.dts | 2 +-
arch/arm/boot/dts/tegra20-paz00.dts | 2 +-
arch/arm/boot/dts/tegra20-seaboard.dts | 4 ++--
arch/arm/boot/dts/tegra20-trimslice.dts | 2 +-
arch/arm/boot/dts/tegra20-ventana.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis-eval.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 2 +-
.../boot/dts/tegra30-asus-nexus7-grouper-common.dtsi | 8 ++++----
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi | 10 +++++-----
arch/arm/boot/dts/tegra30-cardhu.dtsi | 6 +++---
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra30-ouya.dts | 2 +-
arch/arm/boot/dts/tegra30-pegatron-chagall.dts | 10 +++++-----
26 files changed, 57 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/tegra114-asus-tf701t.dts b/arch/arm/boot/dts/tegra114-asus-tf701t.dts
index b791ce97424b..b44b2371cd56 100644
--- a/arch/arm/boot/dts/tegra114-asus-tf701t.dts
+++ b/arch/arm/boot/dts/tegra114-asus-tf701t.dts
@@ -684,7 +684,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
- power {
+ button-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
@@ -692,14 +692,14 @@ power {
wakeup-source;
};
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <10>;
};
- volume-down {
+ button-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
@@ -715,7 +715,7 @@ gpio-hall-sensor {
pinctrl-names = "default";
pinctrl-0 = <&gpio_hall_sensor_default>;
- hall-sensor {
+ event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 658edfb8d7fa..fffd62bcea6a 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1161,26 +1161,26 @@ clk32k_in: clock-32k {
gpio-keys {
compatible = "gpio-keys";
- home {
+ key-home {
label = "Home";
gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- volume_down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 2498cf18fd39..b9d00009d1f4 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -1025,19 +1025,19 @@ clk32k_in: clock-32k {
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Back";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- home {
+ key-home {
label = "Home";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
index ef8f722dd9cb..f02d8c79eee7 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -282,20 +282,20 @@ clk32k_in: clock-32k {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- volume_down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume_up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 3209554ec7e6..bce12b3411fc 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -191,7 +191,7 @@ backlight: backlight {
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "WAKE1_MICO";
gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
index 814257c79bf1..800283ad6bdc 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -193,7 +193,7 @@ backlight: backlight {
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "WAKE1_MICO";
gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 28b889e4e33b..f41dd4039c07 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1886,7 +1886,7 @@ cpu@0 {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index a93cfb492ba1..13061ab5247b 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -603,7 +603,7 @@ cpu@0 {
gpio-keys {
compatible = "gpio-keys";
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <5>;
@@ -612,7 +612,7 @@ lid {
wakeup-source;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 6a9592ceb5f2..8f40fcfc11b0 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -1078,7 +1078,7 @@ clk32k_in: clock-32k {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index bf1126d26aff..dac6d02a1b15 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -905,7 +905,7 @@ panel_input: endpoint {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
@@ -914,7 +914,7 @@ power {
wakeup-source;
};
- rotation-lock {
+ key-rotation-lock {
label = "Rotate-lock";
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
linux,code = <SW_ROTATE_LOCK>;
@@ -922,7 +922,7 @@ rotation-lock {
debounce-interval = <10>;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
@@ -931,7 +931,7 @@ volume-up {
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts
index f3b0166f7a9c..62db602c7205 100644
--- a/arch/arm/boot/dts/tegra20-asus-tf101.dts
+++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts
@@ -980,7 +980,7 @@ cpu1: cpu@1 {
gpio-keys {
compatible = "gpio-keys";
- dock-hall-sensor {
+ event-dock-hall-sensor {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
@@ -990,7 +990,7 @@ dock-hall-sensor {
wakeup-source;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
@@ -999,7 +999,7 @@ power {
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
@@ -1008,7 +1008,7 @@ volume-up {
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
index d2a3bf9d28bd..cb1190b77db3 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -209,7 +209,7 @@ clk16m: osc3 {
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "SODIMM pin 45 wakeup";
gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index 00ecbbd5e9e1..53487cc21513 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -191,7 +191,7 @@ backlight: backlight {
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "SODIMM pin 45 wakeup";
gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 79b6b79fab65..11f21aeba8e9 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -648,7 +648,7 @@ clk32k_in: clock-32k {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 0fb4b1f5bc1c..48fe628c6d87 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -596,7 +596,7 @@ clk32k_in: clock-32k {
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "Wakeup";
gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index c4a6a6a94559..5b4c5ef30996 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -800,14 +800,14 @@ clk32k_in: clock-32k {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
wakeup-source;
};
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
linux,input-type = <5>; /* EV_SW */
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 9d0c86711de2..dc51835423a9 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -388,7 +388,7 @@ clk32k_in: clock-32k {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index b0a00970b61c..caa17e876e41 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -628,7 +628,7 @@ cpu1: cpu@1 {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 93b83b3c5655..ad968ff968d7 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -181,7 +181,7 @@ backlight: backlight {
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "WAKE1_MICO";
gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index fbfa75e53f32..c172fdb5e1ae 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -182,7 +182,7 @@ backlight: backlight {
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "WAKE1_MICO";
gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
index 55e6171a411d..5ed6b4dca100 100644
--- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
@@ -1124,7 +1124,7 @@ trusted-foundations {
gpio-keys {
compatible = "gpio-keys";
- hall-sensor {
+ event-hall-sensor {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
@@ -1134,7 +1134,7 @@ hall-sensor {
wakeup-source;
};
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
@@ -1143,7 +1143,7 @@ power {
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
@@ -1152,7 +1152,7 @@ volume-up {
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
index c662ab261ed5..58159b789688 100644
--- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
@@ -1511,7 +1511,7 @@ extcon-keys {
compatible = "gpio-keys";
interrupt-parent = <&gpio>;
- dock-hall-sensor {
+ event-dock-hall-sensor {
label = "Lid sensor";
gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
@@ -1521,7 +1521,7 @@ dock-hall-sensor {
wakeup-source;
};
- lineout-detect {
+ event-lineout-detect {
label = "Audio dock line-out detect";
gpios = <&gpio TEGRA_GPIO(X, 3) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
@@ -1544,7 +1544,7 @@ gpio-keys {
compatible = "gpio-keys";
interrupt-parent = <&gpio>;
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
@@ -1553,7 +1553,7 @@ power {
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
@@ -1562,7 +1562,7 @@ volume-up {
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index ba257ed36d9c..540530c983ff 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -685,7 +685,7 @@ map0 {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
label = "Power";
interrupt-parent = <&pmic>;
interrupts = <2 0>;
@@ -694,14 +694,14 @@ power {
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <10>;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 7d4a6ca4936a..8dbc15f9a9e4 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -145,7 +145,7 @@ clk16m: osc3 {
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "SODIMM pin 45 wakeup";
gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts
index e58dda4f9d2c..b7acea39b942 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/tegra30-ouya.dts
@@ -4764,7 +4764,7 @@ usb3_vbus_reg: usb3_vbus_reg {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
debounce-interval = <10>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
index 8ce61035290b..8b22d12dd0e2 100644
--- a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
+++ b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
@@ -2655,7 +2655,7 @@ extcon-keys {
compatible = "gpio-keys";
interrupt-parent = <&gpio>;
- dock-insert {
+ event-dock-insert {
label = "Chagall Dock";
gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
@@ -2665,7 +2665,7 @@ dock-insert {
wakeup-source;
};
- lineout-detect {
+ event-lineout-detect {
label = "Audio dock line-out detect";
gpios = <&gpio TEGRA_GPIO(S, 3) GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
@@ -2688,7 +2688,7 @@ gpio-keys {
compatible = "gpio-keys";
interrupt-parent = <&gpio>;
- power {
+ key-power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
@@ -2697,7 +2697,7 @@ power {
wakeup-source;
};
- volume-up {
+ key-volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
@@ -2706,7 +2706,7 @@ volume-up {
wakeup-source;
};
- volume-down {
+ key-volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 21/40] arm64: dts: qcom: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
` (21 preceding siblings ...)
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-22 8:33 ` Krzysztof Kozlowski
` (2 more replies)
-1 siblings, 3 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andy Gross,
Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, linux-arm-msm,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 2 +-
.../boot/dts/qcom/msm8916-alcatel-idol347.dts | 2 +-
.../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 4 ++--
.../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 2 +-
.../boot/dts/qcom/msm8916-longcheer-l8150.dts | 2 +-
.../boot/dts/qcom/msm8916-longcheer-l8910.dts | 2 +-
.../qcom/msm8916-samsung-a2015-common.dtsi | 6 +++---
.../boot/dts/qcom/msm8916-samsung-j5.dts | 4 ++--
.../dts/qcom/msm8916-samsung-serranove.dts | 6 +++---
.../dts/qcom/msm8916-wingtech-wt88047.dts | 2 +-
.../boot/dts/qcom/msm8992-xiaomi-libra.dts | 2 +-
.../dts/qcom/msm8994-msft-lumia-octagon.dtsi | 10 +++++-----
.../qcom/msm8994-sony-xperia-kitakami.dtsi | 2 +-
.../boot/dts/qcom/msm8996-xiaomi-common.dtsi | 6 +++---
.../boot/dts/qcom/msm8998-fxtec-pro1.dts | 20 +++++++++----------
.../boot/dts/qcom/msm8998-oneplus-common.dtsi | 6 +++---
.../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 8 ++++----
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 +-
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 8 ++++----
.../boot/dts/qcom/sdm632-fairphone-fp3.dts | 2 +-
.../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 2 +-
arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++--
.../boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 ++--
.../boot/dts/qcom/sdm845-shift-axolotl.dts | 2 +-
.../dts/qcom/sdm845-sony-xperia-tama.dtsi | 2 +-
.../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 2 +-
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 ++--
.../qcom/sm6125-sony-xperia-seine-pdx201.dts | 2 +-
.../boot/dts/qcom/sm7225-fairphone-fp4.dts | 2 +-
arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 4 ++--
.../dts/qcom/sm8150-microsoft-surface-duo.dts | 4 ++--
arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 4 ++--
.../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 2 +-
.../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 2 +-
36 files changed, 71 insertions(+), 71 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 49afbb1a066a..1dbfedd5711c 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -82,7 +82,7 @@ div1_mclk: divclk1 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
index 265e539e7e99..3dc9619fde6e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
@@ -27,7 +27,7 @@ gpio-keys {
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
index d4d33dd3584a..dd92070a1211 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts
@@ -28,14 +28,14 @@ gpio-keys {
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <15>;
};
- volume-down {
+ button-volume-down {
label = "Volume Down";
gpios = <&msmgpio 117 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index 00488afb413d..9e470c67274e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -39,7 +39,7 @@ gpio-keys {
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index b3836dde8a54..d85e7f7c0835 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -39,7 +39,7 @@ gpio-keys {
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
index f9ce123471d4..b4812f093b17 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
@@ -28,7 +28,7 @@ gpio-keys {
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index 9b4b7de7cec2..72c829bf0b2e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -31,13 +31,13 @@ gpio-keys {
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- home {
+ button-home {
label = "Home";
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
@@ -52,7 +52,7 @@ gpio-hall-sensor {
label = "GPIO Hall Effect Sensor";
- hall-sensor {
+ event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
index 6c408d61de75..eabeed18cfaa 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -34,13 +34,13 @@ gpio-keys {
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- home-key {
+ button-home {
label = "Home Key";
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
index 58dfbfff4c7d..439e89cf7878 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts
@@ -49,13 +49,13 @@ gpio-keys {
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- home {
+ button-home {
label = "Home";
gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
@@ -70,7 +70,7 @@ gpio-hall-sensor {
label = "GPIO Hall Effect Sensor";
- hall-sensor {
+ event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
index 69a44c6f57fc..84a352dcf9a2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
@@ -29,7 +29,7 @@ gpio-keys {
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index 7748b745a5df..cdb2dfe02e56 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -51,7 +51,7 @@ framebuffer0: framebuffer@3400000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
index cc038f9b641f..a84a36edc4fa 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi
@@ -64,7 +64,7 @@ gpio-keys {
compatible = "gpio-keys";
autorepeat;
- volupkey {
+ volup-key {
label = "Volume Up";
gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -73,7 +73,7 @@ volupkey {
debounce-interval = <15>;
};
- camsnapkey {
+ camsnap-key {
label = "Camera Snapshot";
gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -82,7 +82,7 @@ camsnapkey {
debounce-interval = <15>;
};
- camfocuskey {
+ camfocus-key {
label = "Camera Focus";
gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -100,7 +100,7 @@ gpio-hall-sensor {
label = "GPIO Hall Effect Sensor";
- hall-front-sensor {
+ event-hall-front-sensor {
label = "Hall Effect Front Sensor";
gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
@@ -108,7 +108,7 @@ hall-front-sensor {
linux,can-disable;
};
- hall-back-sensor {
+ event-hall-back-sensor {
label = "Hall Effect Back Sensor";
gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index e5a45af0bd12..0fb12db47d6e 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -27,7 +27,7 @@ / {
/* Kitakami firmware doesn't support PSCI */
/delete-node/ psci;
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index a7090befc16f..2077d9f45a55 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -38,10 +38,10 @@ divclk4: divclk4 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- vol_up {
+ key-vol-up {
label = "Volume Up";
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
@@ -49,7 +49,7 @@ vol_up {
debounce-interval = <15>;
};
- dome {
+ key-dome {
label = "Home";
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index dc5b9b274df3..1ffe72b47f67 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -33,7 +33,7 @@ gpio-hall-sensors {
pinctrl-names = "default";
pinctrl-0 = <&hall_sensor1_default>;
- hall-sensor1 {
+ event-hall-sensor1 {
label = "Keyboard Hall Sensor";
gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
debounce-interval = <15>;
@@ -49,7 +49,7 @@ gpio-kb-extra-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_kb_pins_extra>;
- home {
+ key-home {
label = "Home";
gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
@@ -57,7 +57,7 @@ home {
linux,can-disable;
};
- super-l {
+ key-super-l {
label = "Super Left";
gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
linux,code = <KEY_FN>;
@@ -65,7 +65,7 @@ super-l {
linux,can-disable;
};
- super-r {
+ key-super-r {
label = "Super Right";
gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
linux,code = <KEY_FN>;
@@ -73,7 +73,7 @@ super-r {
linux,can-disable;
};
- shift {
+ key-shift {
label = "Shift";
gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RIGHTSHIFT>;
@@ -81,7 +81,7 @@ shift {
linux,can-disable;
};
- ctrl {
+ key-ctrl {
label = "Ctrl";
gpios = <&tlmm 128 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LEFTCTRL>;
@@ -89,7 +89,7 @@ ctrl {
linux,can-disable;
};
- alt {
+ key-alt {
label = "Alt";
gpios = <&tlmm 129 GPIO_ACTIVE_LOW>;
linux,code = <KEY_LEFTALT>;
@@ -106,7 +106,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,
<&cam_snapshot_pin_a>;
- vol-up {
+ button-vol-up {
label = "Volume Up";
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
@@ -115,7 +115,7 @@ vol-up {
debounce-interval = <15>;
};
- camera-snapshot {
+ button-camera-snapshot {
label = "Camera Snapshot";
gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
@@ -123,7 +123,7 @@ camera-snapshot {
debounce-interval = <15>;
};
- camera-focus {
+ button-camera-focus {
label = "Camera Focus";
gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index dbaea360bffc..cca5c9dfa96d 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -77,7 +77,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&vol_keys_default>;
- vol-down {
+ button-vol-down {
label = "Volume down";
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
@@ -85,7 +85,7 @@ vol-down {
wakeup-source;
};
- vol-up {
+ button-vol-up {
label = "Volume up";
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
@@ -101,7 +101,7 @@ gpio-hall-sensor {
pinctrl-names = "default";
pinctrl-0 = <&hall_sensor_default>;
- hall-sensor {
+ event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 47488a1aecae..9ad875c4a6ca 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -97,7 +97,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>,
<&cam_snapshot_pin_a>;
- vol-down {
+ button-vol-down {
label = "Volume Down";
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
@@ -106,7 +106,7 @@ vol-down {
debounce-interval = <15>;
};
- camera-snapshot {
+ button-camera-snapshot {
label = "Camera Snapshot";
gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
@@ -114,7 +114,7 @@ camera-snapshot {
debounce-interval = <15>;
};
- camera-focus {
+ button-camera-focus {
label = "Camera Focus";
gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_KEY>;
@@ -129,7 +129,7 @@ gpio-hall-sensor {
pinctrl-names = "default";
pinctrl-0 = <&hall_sensor0_default>;
- hall-sensor0 {
+ event-hall-sensor0 {
label = "Cover Hall Sensor";
gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index e55dbaa6dc12..53d76406ed25 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -330,7 +330,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pen_pdct_l>;
- pen_insert: pen-insert {
+ pen_insert: switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 5eb668991e24..5b294e81dbbc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -27,7 +27,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&key_vol_up_default>;
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 42af1fade461..bc06b485897c 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -87,13 +87,13 @@ cam_vana_rear_vreg: cam_vana_rear_vreg {
pinctrl-0 = <&imx300_vana_default>;
};
- gpio_keys {
+ gpio-keys {
status = "okay";
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- camera_focus {
+ key-camera-focus {
label = "Camera Focus";
gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -101,7 +101,7 @@ camera_focus {
debounce-interval = <15>;
};
- camera_snapshot {
+ key-camera-snapshot {
label = "Camera Snapshot";
gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -109,7 +109,7 @@ camera_snapshot {
debounce-interval = <15>;
};
- vol_down {
+ key-vol-down {
label = "Volume Down";
gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 8b815b2a60a7..891e314bc782 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -27,7 +27,7 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
- volume-up {
+ key-volume-up {
label = "volume_up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
index dcbaacf18f66..5a1df51a2da7 100644
--- a/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
+++ b/arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts
@@ -51,7 +51,7 @@ vph_pwr: vph-pwr-regulator {
gpio-keys {
compatible = "gpio-keys";
- volup {
+ key-volup {
label = "Volume Up";
gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index e7e4cc5936aa..14ffa0f96850 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -119,7 +119,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pen_eject_odl>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 194ebeb3259c..a6986f95a80a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -43,14 +43,14 @@ dc12v: dc12v-regulator {
regulator-always-on;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&vol_up_pin_a>;
- vol-up {
+ key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 07b729f9fec5..750c609c9258 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -34,14 +34,14 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
- vol-down {
+ key-vol-down {
label = "Volume down";
linux,code = <KEY_VOLUMEDOWN>;
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
};
- vol-up {
+ key-vol-up {
label = "Volume up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 103cc40816fd..07e8ab9e455d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -48,7 +48,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&volume_up_gpio>;
- vol-up {
+ key-vol-up {
label = "volume_up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index 281fe6dea62a..51ee42e3c995 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -19,7 +19,7 @@ gpio-keys {
/* Neither Camera Focus, nor Camera Shutter seem to work... */
- vol-down {
+ key-vol-down {
label = "volume_down";
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index d88dc07205f7..c396f30db050 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -45,7 +45,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&vol_up_pin_a>;
- vol-up {
+ key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index f1619b3f97ef..48fe2de28635 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -41,7 +41,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
- lid {
+ switch-lid {
gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
@@ -49,7 +49,7 @@ lid {
wakeup-event-action = <EV_ACT_DEASSERTED>;
};
- mode {
+ switch-mode {
gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
linux,input-type = <EV_SW>;
linux,code = <SW_TABLET_MODE>;
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 871ccbba445b..f933b6c4f763 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -46,7 +46,7 @@ gpio-keys {
#size-cells = <0>;
autorepeat;
- vol-dn {
+ key-vol-dn {
label = "Volume Down";
gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 61925216f5e3..0301f600e206 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -48,7 +48,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin>;
- volume-up {
+ key-volume-up {
label = "volume_up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index 37ddca0f0223..3331ee957d64 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -44,10 +44,10 @@ vreg_s4a_1p8: pm8150-s4 {
vin-supply = <&vph_pwr>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- vol-up {
+ key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
index a73317e1a824..bb278ecac3fa 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -49,10 +49,10 @@ vreg_s4a_1p8: pm8150-s4 {
vin-supply = <&vph_pwr>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- vol_up {
+ key-vol-up {
label = "Volume Up";
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
index 3b082472062b..632e98193d27 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-hdk.dts
@@ -53,10 +53,10 @@ vreg_s6c_0p88: smpc6-regulator {
vin-supply = <&vph_pwr>;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- vol-up {
+ key-vol-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index e819b5b77363..549e0a2aa9fe 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -57,7 +57,7 @@ gpio_keys: gpio-keys {
* case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1).
*/
- vol-down {
+ key-vol-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index 90b13cbe2fa6..cb9bbd234b7b 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -49,7 +49,7 @@ gpio-keys {
/* For reasons still unknown, GAssist key and Camera Focus/Shutter don't work.. */
- vol-down {
+ key-vol-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 22/40] arm64: dts: qcom: correct gpio-keys properties
2022-06-16 0:52 ` Krzysztof Kozlowski
` (22 preceding siblings ...)
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
-1 siblings, 2 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andy Gross,
Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, linux-arm-msm,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 4 +---
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 4 +---
arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts | 4 +---
.../boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 10 ++++------
arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 2 --
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 2 --
.../boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 2 --
7 files changed, 7 insertions(+), 21 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 7c1eab605c15..21242919fe18 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -92,14 +92,12 @@ hdmi_con: endpoint {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&msm_key_volp_n_default>;
- button@0 {
+ button {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 1dbfedd5711c..ba76d4620224 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -84,14 +84,12 @@ div1_mclk: divclk1 {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&volume_up_gpio>;
- button@0 {
+ button {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index cdb2dfe02e56..04887182bca3 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -53,11 +53,9 @@ framebuffer0: framebuffer@3400000 {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button {
label = "Volume Up";
gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index 0fb12db47d6e..f430d797196f 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -29,11 +29,9 @@ / {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
- button@0 {
+ button-0 {
label = "Volume Down";
gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -42,7 +40,7 @@ button@0 {
debounce-interval = <15>;
};
- button@1 {
+ button-1 {
label = "Volume Up";
gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -51,7 +49,7 @@ button@1 {
debounce-interval = <15>;
};
- button@2 {
+ button-2 {
label = "Camera Snapshot";
gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -60,7 +58,7 @@ button@2 {
debounce-interval = <15>;
};
- button@3 {
+ button-3 {
label = "Camera Focus";
gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index 1ffe72b47f67..6a200f37c035 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -101,8 +101,6 @@ key-alt {
gpio-keys {
compatible = "gpio-keys";
label = "Side buttons";
- #address-cells = <1>;
- #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>,
<&cam_snapshot_pin_a>;
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index bc06b485897c..42e89f41eb7d 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -90,8 +90,6 @@ cam_vana_rear_vreg: cam_vana_rear_vreg {
gpio-keys {
status = "okay";
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
key-camera-focus {
label = "Camera Focus";
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index f933b6c4f763..c9f195649954 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -42,8 +42,6 @@ extcon_usb: extcon-usb {
gpio-keys {
status = "okay";
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
key-vol-dn {
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 23/40] arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keys
2022-06-16 0:52 ` Krzysztof Kozlowski
` (23 preceding siblings ...)
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
-1 siblings, 2 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andy Gross,
Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, linux-arm-msm,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
Nodes do not need explicit status=okay.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 42e89f41eb7d..48720026423d 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -88,7 +88,6 @@ cam_vana_rear_vreg: cam_vana_rear_vreg {
};
gpio-keys {
- status = "okay";
compatible = "gpio-keys";
key-camera-focus {
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 24/40] arm64: dts: qcom: align led node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
` (24 preceding siblings ...)
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
-1 siblings, 2 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andy Gross,
Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, linux-arm-msm,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
with 'led'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 4 ++--
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index 6a200f37c035..0a5b4617a8e6 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -133,7 +133,7 @@ button-camera-focus {
keyboard-leds {
compatible = "gpio-leds";
- backlight {
+ led-0 {
color = <LED_COLOR_ID_WHITE>;
default-state = "off";
function = LED_FUNCTION_KBD_BACKLIGHT;
@@ -142,7 +142,7 @@ backlight {
retain-state-suspended;
};
- caps-lock {
+ led-1 {
color = <LED_COLOR_ID_YELLOW>;
default-state = "off";
function = LED_FUNCTION_CAPSLOCK;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a6986f95a80a..72b234ad9fab 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -60,21 +60,21 @@ key-vol-up {
leds {
compatible = "gpio-leds";
- user4 {
+ led-0 {
label = "green:user4";
gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "panic-indicator";
default-state = "off";
};
- wlan {
+ led-1 {
label = "yellow:wlan";
gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
- bt {
+ led-2 {
label = "blue:bt";
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 25/40] ARM: dts: qcom: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
` (25 preceding siblings ...)
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
-1 siblings, 1 reply; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andy Gross,
Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, linux-arm-msm,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 4 ++--
arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts | 8 ++++----
arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi | 2 +-
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 4 ++--
arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi | 6 +++---
arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 4 ++--
arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi | 8 ++++----
arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts | 6 +++---
arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts | 6 +++---
.../dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 8 ++++----
10 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index ca9f73528196..549f3ef53b2d 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -44,12 +44,12 @@ ext_3p3v: regulator-fixed@1 {
gpio-keys {
compatible = "gpio-keys";
- volume_up {
+ key-volume-up {
label = "Volume Up";
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_VOLUMEUP>;
};
- volume_down {
+ key-volume-down {
label = "Volume Down";
gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 0cee62c7b8b0..13826462fee5 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -23,28 +23,28 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- camera-focus {
+ key-camera-focus {
label = "camera_focus";
gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
index 1f3b1ce82108..af9a26fb5d4a 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
@@ -11,7 +11,7 @@ / {
keys {
compatible = "gpio-keys";
- reset {
+ key-reset {
label = "reset";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 596d129d4a95..760151b52add 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -187,12 +187,12 @@ partition@0 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&buttons_pins>;
pinctrl-names = "default";
- button@1 {
+ button {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index 5c802b99e15f..ccebb7d56113 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -65,19 +65,19 @@ sata@29000000 {
status = "okay";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&buttons_pins>;
pinctrl-names = "default";
- button@1 {
+ button-1 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
debounce-interval = <60>;
};
- button@2 {
+ button-2 {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 9493886a5c0d..72e82033252e 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -24,14 +24,14 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEUP>;
};
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
index 1d21de46f85c..e0152f118495 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -20,28 +20,28 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
- camera-focus {
+ key-camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
index 58cb2ce1e4df..92857283a675 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -25,7 +25,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_CAMERA>;
@@ -33,7 +33,7 @@ camera-snapshot {
debounce-interval = <15>;
};
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
@@ -41,7 +41,7 @@ volume-down {
debounce-interval = <15>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
index d6b2300a8223..1ed40c14f9d3 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -25,7 +25,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -33,7 +33,7 @@ volume-down {
debounce-interval = <15>;
};
- home-key {
+ key-home {
label = "home_key";
gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
@@ -42,7 +42,7 @@ home-key {
debounce-interval = <15>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 9bd8faea61a5..e409c12edc81 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -24,28 +24,28 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pin_a>;
- volume-down {
+ key-volume-down {
label = "volume_down";
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_VOLUMEDOWN>;
};
- camera-snapshot {
+ key-camera-snapshot {
label = "camera_snapshot";
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA>;
};
- camera-focus {
+ key-camera-focus {
label = "camera_focus";
gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
linux,code = <KEY_CAMERA_FOCUS>;
};
- volume-up {
+ key-volume-up {
label = "volume_up";
gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
linux,input-type = <1>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Heiko Stuebner, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v2:
1. rk3308-evb.dts, rk3326-odroid-go2.dts: different names according to
discussion.
---
arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 2 +-
.../boot/dts/rockchip/rk3326-odroid-go2.dts | 32 +++++++++----------
.../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi | 2 +-
.../boot/dts/rockchip/rk3368-geekbox.dts | 2 +-
.../dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
.../boot/dts/rockchip/rk3368-px5-evb.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +-
.../boot/dts/rockchip/rk3399-firefly.dts | 2 +-
.../dts/rockchip/rk3399-gru-chromebook.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-gru-kevin.dts | 2 +-
.../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-khadas-edge.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 4 +--
.../boot/dts/rockchip/rk3399-nanopi4.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-orangepi.dts | 2 +-
.../boot/dts/rockchip/rk3399-pinebook-pro.dts | 4 +--
.../boot/dts/rockchip/rk3399-roc-pc.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-rockpro64.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-sapphire.dtsi | 2 +-
.../boot/dts/rockchip/rk3566-pinenote.dtsi | 2 +-
21 files changed, 38 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
index 9b4f855ea5d4..9fe9b0d11003 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
@@ -75,7 +75,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index ea0695b51ecd..415aa9ff8bd4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -71,82 +71,82 @@ gpio-keys {
* |------------------------------------------------|
*/
- sw1 {
+ button-sw1 {
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
- sw2 {
+ button-sw2 {
gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
label = "DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
- sw3 {
+ button-sw3 {
gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
label = "DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
- sw4 {
+ button-sw4 {
gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
label = "DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
- sw5 {
+ button-sw5 {
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
label = "BTN-A";
linux,code = <BTN_EAST>;
};
- sw6 {
+ button-sw6 {
gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
label = "BTN-B";
linux,code = <BTN_SOUTH>;
};
- sw7 {
+ button-sw7 {
gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
label = "BTN-Y";
linux,code = <BTN_WEST>;
};
- sw8 {
+ button-sw8 {
gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
label = "BTN-X";
linux,code = <BTN_NORTH>;
};
- sw9 {
+ button-sw9 {
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
label = "F1";
linux,code = <BTN_TRIGGER_HAPPY1>;
};
- sw10 {
+ button-sw10 {
gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
label = "F2";
linux,code = <BTN_TRIGGER_HAPPY2>;
};
- sw11 {
+ button-sw11 {
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
label = "F3";
linux,code = <BTN_TRIGGER_HAPPY3>;
};
- sw12 {
+ button-sw12 {
gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
label = "F4";
linux,code = <BTN_TRIGGER_HAPPY4>;
};
- sw13 {
+ button-sw13 {
gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
label = "F5";
linux,code = <BTN_TRIGGER_HAPPY5>;
};
- sw14 {
+ button-sw14 {
gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
label = "F6";
linux,code = <BTN_TRIGGER_HAPPY6>;
};
- sw15 {
+ button-sw15 {
gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
label = "TOP-LEFT";
linux,code = <BTN_TL>;
};
- sw16 {
+ button-sw16 {
gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
label = "TOP-RIGHT";
linux,code = <BTN_TR>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 3857d487ab84..1445b879ac7a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -34,7 +34,7 @@ keys {
pinctrl-0 = <&reset_button_pin>;
pinctrl-names = "default";
- reset {
+ key-reset {
label = "reset";
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index 15d1fc541c38..083452c67711 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -76,7 +76,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index 62aa97a0b8c9..be06e6e64d18 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -43,7 +43,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 05c50e584e2e..7f5bba0c6001 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -44,7 +44,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index 5ccaa5f7a370..29df84b81552 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -30,7 +30,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 959d3cc801f2..38d757c00548 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -37,7 +37,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index b340c9e246c4..c5db64f3e124 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -87,7 +87,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 50d459ee4831..cd074641884b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -206,7 +206,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>;
- wake_on_bt: wake-on-bt {
+ wake_on_bt: key-wake-on-bt {
label = "Wake-on-Bluetooth";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 6863689df06f..2cc9b3386c16 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -92,7 +92,7 @@ &gpio_keys {
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index 1977103a5ef4..40d4053fba80 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -183,7 +183,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pen_eject_odl>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index 46c4581deb8d..2a332763c35c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -136,7 +136,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
index cef4d18b599d..fe5b52610010 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
@@ -46,9 +46,9 @@ wan_led: led-wan {
gpio-keys {
pinctrl-0 = <&reset_button_pin>;
- /delete-node/ power;
+ /delete-node/ key-power;
- reset {
+ key-reset {
debounce-interval = <50>;
gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
label = "reset";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 248ad41a976b..278123b4f911 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -111,7 +111,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&power_key>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index ed856bfcfc33..9e2e246e0bab 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -78,7 +78,7 @@ keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index d6b68d77d63a..194e48c755f6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -76,7 +76,7 @@ gpio-key-lid {
pinctrl-names = "default";
pinctrl-0 = <&lidbtn_pin>;
- lid {
+ switch-lid {
debounce-interval = <20>;
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
label = "Lid";
@@ -92,7 +92,7 @@ gpio-key-power {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn_pin>;
- power {
+ key-power {
debounce-interval = <20>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 0e45cc2d195b..acb174d3a8c5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -54,7 +54,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 6fdeee7d5f6d..78157521e944 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -42,7 +42,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 2aa0fad8f893..e6ac292ce645 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -53,7 +53,7 @@ keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index e01668e6e5f9..ea0fa627c464 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -49,7 +49,7 @@ gpio-keys {
pinctrl-0 = <&hall_int_l>;
pinctrl-names = "default";
- cover {
+ switch {
label = "cover";
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Heiko Stuebner, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v2:
1. rk3308-evb.dts, rk3326-odroid-go2.dts: different names according to
discussion.
---
arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 2 +-
.../boot/dts/rockchip/rk3326-odroid-go2.dts | 32 +++++++++----------
.../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi | 2 +-
.../boot/dts/rockchip/rk3368-geekbox.dts | 2 +-
.../dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
.../boot/dts/rockchip/rk3368-px5-evb.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +-
.../boot/dts/rockchip/rk3399-firefly.dts | 2 +-
.../dts/rockchip/rk3399-gru-chromebook.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-gru-kevin.dts | 2 +-
.../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-khadas-edge.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 4 +--
.../boot/dts/rockchip/rk3399-nanopi4.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-orangepi.dts | 2 +-
.../boot/dts/rockchip/rk3399-pinebook-pro.dts | 4 +--
.../boot/dts/rockchip/rk3399-roc-pc.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-rockpro64.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-sapphire.dtsi | 2 +-
.../boot/dts/rockchip/rk3566-pinenote.dtsi | 2 +-
21 files changed, 38 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
index 9b4f855ea5d4..9fe9b0d11003 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
@@ -75,7 +75,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index ea0695b51ecd..415aa9ff8bd4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -71,82 +71,82 @@ gpio-keys {
* |------------------------------------------------|
*/
- sw1 {
+ button-sw1 {
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
- sw2 {
+ button-sw2 {
gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
label = "DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
- sw3 {
+ button-sw3 {
gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
label = "DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
- sw4 {
+ button-sw4 {
gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
label = "DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
- sw5 {
+ button-sw5 {
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
label = "BTN-A";
linux,code = <BTN_EAST>;
};
- sw6 {
+ button-sw6 {
gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
label = "BTN-B";
linux,code = <BTN_SOUTH>;
};
- sw7 {
+ button-sw7 {
gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
label = "BTN-Y";
linux,code = <BTN_WEST>;
};
- sw8 {
+ button-sw8 {
gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
label = "BTN-X";
linux,code = <BTN_NORTH>;
};
- sw9 {
+ button-sw9 {
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
label = "F1";
linux,code = <BTN_TRIGGER_HAPPY1>;
};
- sw10 {
+ button-sw10 {
gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
label = "F2";
linux,code = <BTN_TRIGGER_HAPPY2>;
};
- sw11 {
+ button-sw11 {
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
label = "F3";
linux,code = <BTN_TRIGGER_HAPPY3>;
};
- sw12 {
+ button-sw12 {
gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
label = "F4";
linux,code = <BTN_TRIGGER_HAPPY4>;
};
- sw13 {
+ button-sw13 {
gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
label = "F5";
linux,code = <BTN_TRIGGER_HAPPY5>;
};
- sw14 {
+ button-sw14 {
gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
label = "F6";
linux,code = <BTN_TRIGGER_HAPPY6>;
};
- sw15 {
+ button-sw15 {
gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
label = "TOP-LEFT";
linux,code = <BTN_TL>;
};
- sw16 {
+ button-sw16 {
gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
label = "TOP-RIGHT";
linux,code = <BTN_TR>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 3857d487ab84..1445b879ac7a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -34,7 +34,7 @@ keys {
pinctrl-0 = <&reset_button_pin>;
pinctrl-names = "default";
- reset {
+ key-reset {
label = "reset";
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index 15d1fc541c38..083452c67711 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -76,7 +76,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index 62aa97a0b8c9..be06e6e64d18 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -43,7 +43,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 05c50e584e2e..7f5bba0c6001 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -44,7 +44,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index 5ccaa5f7a370..29df84b81552 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -30,7 +30,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 959d3cc801f2..38d757c00548 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -37,7 +37,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index b340c9e246c4..c5db64f3e124 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -87,7 +87,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 50d459ee4831..cd074641884b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -206,7 +206,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>;
- wake_on_bt: wake-on-bt {
+ wake_on_bt: key-wake-on-bt {
label = "Wake-on-Bluetooth";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 6863689df06f..2cc9b3386c16 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -92,7 +92,7 @@ &gpio_keys {
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index 1977103a5ef4..40d4053fba80 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -183,7 +183,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pen_eject_odl>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index 46c4581deb8d..2a332763c35c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -136,7 +136,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
index cef4d18b599d..fe5b52610010 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
@@ -46,9 +46,9 @@ wan_led: led-wan {
gpio-keys {
pinctrl-0 = <&reset_button_pin>;
- /delete-node/ power;
+ /delete-node/ key-power;
- reset {
+ key-reset {
debounce-interval = <50>;
gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
label = "reset";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 248ad41a976b..278123b4f911 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -111,7 +111,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&power_key>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index ed856bfcfc33..9e2e246e0bab 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -78,7 +78,7 @@ keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index d6b68d77d63a..194e48c755f6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -76,7 +76,7 @@ gpio-key-lid {
pinctrl-names = "default";
pinctrl-0 = <&lidbtn_pin>;
- lid {
+ switch-lid {
debounce-interval = <20>;
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
label = "Lid";
@@ -92,7 +92,7 @@ gpio-key-power {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn_pin>;
- power {
+ key-power {
debounce-interval = <20>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 0e45cc2d195b..acb174d3a8c5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -54,7 +54,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 6fdeee7d5f6d..78157521e944 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -42,7 +42,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 2aa0fad8f893..e6ac292ce645 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -53,7 +53,7 @@ keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index e01668e6e5f9..ea0fa627c464 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -49,7 +49,7 @@ gpio-keys {
pinctrl-0 = <&hall_int_l>;
pinctrl-names = "default";
- cover {
+ switch {
label = "cover";
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
--
2.34.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Heiko Stuebner, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v2:
1. rk3308-evb.dts, rk3326-odroid-go2.dts: different names according to
discussion.
---
arch/arm64/boot/dts/rockchip/rk3308-evb.dts | 2 +-
.../boot/dts/rockchip/rk3326-odroid-go2.dts | 32 +++++++++----------
.../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi | 2 +-
.../boot/dts/rockchip/rk3368-geekbox.dts | 2 +-
.../dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
.../boot/dts/rockchip/rk3368-px5-evb.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368-r88.dts | 2 +-
.../boot/dts/rockchip/rk3399-firefly.dts | 2 +-
.../dts/rockchip/rk3399-gru-chromebook.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-gru-kevin.dts | 2 +-
.../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-khadas-edge.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 4 +--
.../boot/dts/rockchip/rk3399-nanopi4.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-orangepi.dts | 2 +-
.../boot/dts/rockchip/rk3399-pinebook-pro.dts | 4 +--
.../boot/dts/rockchip/rk3399-roc-pc.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-rockpro64.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-sapphire.dtsi | 2 +-
.../boot/dts/rockchip/rk3566-pinenote.dtsi | 2 +-
21 files changed, 38 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
index 9b4f855ea5d4..9fe9b0d11003 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts
@@ -75,7 +75,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index ea0695b51ecd..415aa9ff8bd4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -71,82 +71,82 @@ gpio-keys {
* |------------------------------------------------|
*/
- sw1 {
+ button-sw1 {
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
label = "DPAD-UP";
linux,code = <BTN_DPAD_UP>;
};
- sw2 {
+ button-sw2 {
gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
label = "DPAD-DOWN";
linux,code = <BTN_DPAD_DOWN>;
};
- sw3 {
+ button-sw3 {
gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
label = "DPAD-LEFT";
linux,code = <BTN_DPAD_LEFT>;
};
- sw4 {
+ button-sw4 {
gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
label = "DPAD-RIGHT";
linux,code = <BTN_DPAD_RIGHT>;
};
- sw5 {
+ button-sw5 {
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
label = "BTN-A";
linux,code = <BTN_EAST>;
};
- sw6 {
+ button-sw6 {
gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
label = "BTN-B";
linux,code = <BTN_SOUTH>;
};
- sw7 {
+ button-sw7 {
gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
label = "BTN-Y";
linux,code = <BTN_WEST>;
};
- sw8 {
+ button-sw8 {
gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
label = "BTN-X";
linux,code = <BTN_NORTH>;
};
- sw9 {
+ button-sw9 {
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
label = "F1";
linux,code = <BTN_TRIGGER_HAPPY1>;
};
- sw10 {
+ button-sw10 {
gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
label = "F2";
linux,code = <BTN_TRIGGER_HAPPY2>;
};
- sw11 {
+ button-sw11 {
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
label = "F3";
linux,code = <BTN_TRIGGER_HAPPY3>;
};
- sw12 {
+ button-sw12 {
gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
label = "F4";
linux,code = <BTN_TRIGGER_HAPPY4>;
};
- sw13 {
+ button-sw13 {
gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
label = "F5";
linux,code = <BTN_TRIGGER_HAPPY5>;
};
- sw14 {
+ button-sw14 {
gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
label = "F6";
linux,code = <BTN_TRIGGER_HAPPY6>;
};
- sw15 {
+ button-sw15 {
gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
label = "TOP-LEFT";
linux,code = <BTN_TL>;
};
- sw16 {
+ button-sw16 {
gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
label = "TOP-RIGHT";
linux,code = <BTN_TR>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index 3857d487ab84..1445b879ac7a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -34,7 +34,7 @@ keys {
pinctrl-0 = <&reset_button_pin>;
pinctrl-names = "default";
- reset {
+ key-reset {
label = "reset";
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index 15d1fc541c38..083452c67711 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -76,7 +76,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index 62aa97a0b8c9..be06e6e64d18 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -43,7 +43,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 05c50e584e2e..7f5bba0c6001 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -44,7 +44,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index 5ccaa5f7a370..29df84b81552 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -30,7 +30,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 959d3cc801f2..38d757c00548 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -37,7 +37,7 @@ keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index b340c9e246c4..c5db64f3e124 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -87,7 +87,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 50d459ee4831..cd074641884b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -206,7 +206,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>;
- wake_on_bt: wake-on-bt {
+ wake_on_bt: key-wake-on-bt {
label = "Wake-on-Bluetooth";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 6863689df06f..2cc9b3386c16 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -92,7 +92,7 @@ &gpio_keys {
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index 1977103a5ef4..40d4053fba80 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -183,7 +183,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pen_eject_odl>;
- pen-insert {
+ switch-pen-insert {
label = "Pen Insert";
/* Insert = low, eject = high */
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index 46c4581deb8d..2a332763c35c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -136,7 +136,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
index cef4d18b599d..fe5b52610010 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
@@ -46,9 +46,9 @@ wan_led: led-wan {
gpio-keys {
pinctrl-0 = <&reset_button_pin>;
- /delete-node/ power;
+ /delete-node/ key-power;
- reset {
+ key-reset {
debounce-interval = <50>;
gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
label = "reset";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 248ad41a976b..278123b4f911 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -111,7 +111,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&power_key>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index ed856bfcfc33..9e2e246e0bab 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -78,7 +78,7 @@ keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index d6b68d77d63a..194e48c755f6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -76,7 +76,7 @@ gpio-key-lid {
pinctrl-names = "default";
pinctrl-0 = <&lidbtn_pin>;
- lid {
+ switch-lid {
debounce-interval = <20>;
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
label = "Lid";
@@ -92,7 +92,7 @@ gpio-key-power {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn_pin>;
- power {
+ key-power {
debounce-interval = <20>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 0e45cc2d195b..acb174d3a8c5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -54,7 +54,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 6fdeee7d5f6d..78157521e944 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -42,7 +42,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Key Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 2aa0fad8f893..e6ac292ce645 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -53,7 +53,7 @@ keys: gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
debounce-interval = <100>;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index e01668e6e5f9..ea0fa627c464 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -49,7 +49,7 @@ gpio-keys {
pinctrl-0 = <&hall_int_l>;
pinctrl-names = "default";
- cover {
+ switch {
label = "cover";
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 27/40] ARM: dts: rockchip: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Heiko Stuebner,
Rob Herring, Krzysztof Kozlowski, linux-arm-kernel,
linux-rockchip, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 4 ++--
arch/arm/boot/dts/rk3066a-rayeager.dts | 2 +-
arch/arm/boot/dts/rk3188-bqedison2qc.dts | 4 ++--
arch/arm/boot/dts/rk3188-px3-evb.dts | 2 +-
arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
arch/arm/boot/dts/rk3229-evb.dts | 2 +-
arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
arch/arm/boot/dts/rk3288-firefly-reload.dts | 2 +-
arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +-
arch/arm/boot/dts/rk3288-phycore-rdk.dts | 4 ++--
arch/arm/boot/dts/rk3288-popmetal.dts | 2 +-
arch/arm/boot/dts/rk3288-r89.dts | 2 +-
arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 2 +-
arch/arm/boot/dts/rk3288-veyron-minnie.dts | 4 ++--
arch/arm/boot/dts/rk3288-veyron-pinky.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron.dtsi | 2 +-
17 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 390aa33cd55a..962b4d1291db 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -48,7 +48,7 @@ gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
@@ -56,7 +56,7 @@ power {
wakeup-source;
debounce-interval = <100>;
};
- volume-down {
+ key-volume-down {
gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
linux,code = <KEY_VOLUMEDOWN>;
label = "GPIO Key Vol-";
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 12b2e59aebc4..dbbc5170094e 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -32,7 +32,7 @@ ir: ir-receiver {
keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index 35b7a5798eee..9312be362a7a 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -37,7 +37,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key &usb_int>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
@@ -46,7 +46,7 @@ power {
wakeup-source;
};
- wake_on_usb: wake-on-usb {
+ wake_on_usb: key-wake-on-usb {
label = "Wake-on-USB";
gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index fc478ac4e781..0a1ae689b162 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -29,7 +29,7 @@ gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 36c0945f43b2..a9ed3cd2c2da 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -24,7 +24,7 @@ gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index 797476e8bef1..5c3d08e3eea3 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -107,7 +107,7 @@ vdd_log: vdd-log-regulator {
regulator-boot-on;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
autorepeat;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index c4ca73b40d4a..399d6b9c5fd4 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -118,7 +118,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 9a4a9749c405..a5a0826341e6 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -27,7 +27,7 @@ button-recovery {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 7fb582302b32..052afe5543e2 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -49,7 +49,7 @@ ir: ir-receiver {
keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
index 1e33859de484..1a5156951492 100644
--- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -20,14 +20,14 @@ user_buttons: user-buttons {
pinctrl-names = "default";
pinctrl-0 = <&user_button_pins>;
- button@0 {
+ button-0 {
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
- button@1 {
+ button-1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 8c7376d64bc4..fd90f3b8fc32 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -30,7 +30,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 55467bc30fa6..633e5a032463 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -31,7 +31,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index c4d1d142d8c6..80e0f07c8e87 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -28,7 +28,7 @@ button-recovery {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index 05112c25176d..700bb548d6b2 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -32,7 +32,7 @@ lid_switch: lid-switch {
pinctrl-names = "default";
pinctrl-0 = <&ap_lid_int_l>;
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
wakeup-source;
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 82fc6fba9999..dcdcc55c4098 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -21,14 +21,14 @@ volume_buttons: volume-buttons {
pinctrl-names = "default";
pinctrl-0 = <&volum_down_l &volum_up_l>;
- volum_down {
+ key-volum-down {
label = "Volum_down";
gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
};
- volum_up {
+ key-volum-up {
label = "Volum_up";
gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 4e9fdb0f722d..e2a4e6232eb5 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -45,7 +45,7 @@ &edp {
&lid_switch {
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 54a6838d73f5..e406c8c7c7e5 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -29,7 +29,7 @@ power_button: power-button {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
- power {
+ key-power {
label = "Power";
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 27/40] ARM: dts: rockchip: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Heiko Stuebner,
Rob Herring, Krzysztof Kozlowski, linux-arm-kernel,
linux-rockchip, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 4 ++--
arch/arm/boot/dts/rk3066a-rayeager.dts | 2 +-
arch/arm/boot/dts/rk3188-bqedison2qc.dts | 4 ++--
arch/arm/boot/dts/rk3188-px3-evb.dts | 2 +-
arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
arch/arm/boot/dts/rk3229-evb.dts | 2 +-
arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
arch/arm/boot/dts/rk3288-firefly-reload.dts | 2 +-
arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +-
arch/arm/boot/dts/rk3288-phycore-rdk.dts | 4 ++--
arch/arm/boot/dts/rk3288-popmetal.dts | 2 +-
arch/arm/boot/dts/rk3288-r89.dts | 2 +-
arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 2 +-
arch/arm/boot/dts/rk3288-veyron-minnie.dts | 4 ++--
arch/arm/boot/dts/rk3288-veyron-pinky.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron.dtsi | 2 +-
17 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 390aa33cd55a..962b4d1291db 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -48,7 +48,7 @@ gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
@@ -56,7 +56,7 @@ power {
wakeup-source;
debounce-interval = <100>;
};
- volume-down {
+ key-volume-down {
gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
linux,code = <KEY_VOLUMEDOWN>;
label = "GPIO Key Vol-";
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 12b2e59aebc4..dbbc5170094e 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -32,7 +32,7 @@ ir: ir-receiver {
keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index 35b7a5798eee..9312be362a7a 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -37,7 +37,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key &usb_int>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
@@ -46,7 +46,7 @@ power {
wakeup-source;
};
- wake_on_usb: wake-on-usb {
+ wake_on_usb: key-wake-on-usb {
label = "Wake-on-USB";
gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index fc478ac4e781..0a1ae689b162 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -29,7 +29,7 @@ gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 36c0945f43b2..a9ed3cd2c2da 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -24,7 +24,7 @@ gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index 797476e8bef1..5c3d08e3eea3 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -107,7 +107,7 @@ vdd_log: vdd-log-regulator {
regulator-boot-on;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
autorepeat;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index c4ca73b40d4a..399d6b9c5fd4 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -118,7 +118,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 9a4a9749c405..a5a0826341e6 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -27,7 +27,7 @@ button-recovery {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 7fb582302b32..052afe5543e2 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -49,7 +49,7 @@ ir: ir-receiver {
keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
index 1e33859de484..1a5156951492 100644
--- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -20,14 +20,14 @@ user_buttons: user-buttons {
pinctrl-names = "default";
pinctrl-0 = <&user_button_pins>;
- button@0 {
+ button-0 {
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
- button@1 {
+ button-1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 8c7376d64bc4..fd90f3b8fc32 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -30,7 +30,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 55467bc30fa6..633e5a032463 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -31,7 +31,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index c4d1d142d8c6..80e0f07c8e87 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -28,7 +28,7 @@ button-recovery {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index 05112c25176d..700bb548d6b2 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -32,7 +32,7 @@ lid_switch: lid-switch {
pinctrl-names = "default";
pinctrl-0 = <&ap_lid_int_l>;
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
wakeup-source;
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 82fc6fba9999..dcdcc55c4098 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -21,14 +21,14 @@ volume_buttons: volume-buttons {
pinctrl-names = "default";
pinctrl-0 = <&volum_down_l &volum_up_l>;
- volum_down {
+ key-volum-down {
label = "Volum_down";
gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
};
- volum_up {
+ key-volum-up {
label = "Volum_up";
gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 4e9fdb0f722d..e2a4e6232eb5 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -45,7 +45,7 @@ &edp {
&lid_switch {
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 54a6838d73f5..e406c8c7c7e5 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -29,7 +29,7 @@ power_button: power-button {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
- power {
+ key-power {
label = "Power";
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
--
2.34.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 27/40] ARM: dts: rockchip: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Heiko Stuebner,
Rob Herring, Krzysztof Kozlowski, linux-arm-kernel,
linux-rockchip, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/rk3066a-bqcurie2.dts | 4 ++--
arch/arm/boot/dts/rk3066a-rayeager.dts | 2 +-
arch/arm/boot/dts/rk3188-bqedison2qc.dts | 4 ++--
arch/arm/boot/dts/rk3188-px3-evb.dts | 2 +-
arch/arm/boot/dts/rk3188-radxarock.dts | 2 +-
arch/arm/boot/dts/rk3229-evb.dts | 2 +-
arch/arm/boot/dts/rk3288-evb.dtsi | 2 +-
arch/arm/boot/dts/rk3288-firefly-reload.dts | 2 +-
arch/arm/boot/dts/rk3288-firefly.dtsi | 2 +-
arch/arm/boot/dts/rk3288-phycore-rdk.dts | 4 ++--
arch/arm/boot/dts/rk3288-popmetal.dts | 2 +-
arch/arm/boot/dts/rk3288-r89.dts | 2 +-
arch/arm/boot/dts/rk3288-rock2-square.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi | 2 +-
arch/arm/boot/dts/rk3288-veyron-minnie.dts | 4 ++--
arch/arm/boot/dts/rk3288-veyron-pinky.dts | 2 +-
arch/arm/boot/dts/rk3288-veyron.dtsi | 2 +-
17 files changed, 21 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 390aa33cd55a..962b4d1291db 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -48,7 +48,7 @@ gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
@@ -56,7 +56,7 @@ power {
wakeup-source;
debounce-interval = <100>;
};
- volume-down {
+ key-volume-down {
gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
linux,code = <KEY_VOLUMEDOWN>;
label = "GPIO Key Vol-";
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 12b2e59aebc4..dbbc5170094e 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -32,7 +32,7 @@ ir: ir-receiver {
keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index 35b7a5798eee..9312be362a7a 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -37,7 +37,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key &usb_int>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
@@ -46,7 +46,7 @@ power {
wakeup-source;
};
- wake_on_usb: wake-on-usb {
+ wake_on_usb: key-wake-on-usb {
label = "Wake-on-USB";
gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index fc478ac4e781..0a1ae689b162 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -29,7 +29,7 @@ gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 36c0945f43b2..a9ed3cd2c2da 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -24,7 +24,7 @@ gpio-keys {
compatible = "gpio-keys";
autorepeat;
- power {
+ key-power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index 797476e8bef1..5c3d08e3eea3 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -107,7 +107,7 @@ vdd_log: vdd-log-regulator {
regulator-boot-on;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
autorepeat;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index c4ca73b40d4a..399d6b9c5fd4 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -118,7 +118,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 9a4a9749c405..a5a0826341e6 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -27,7 +27,7 @@ button-recovery {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 7fb582302b32..052afe5543e2 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -49,7 +49,7 @@ ir: ir-receiver {
keys: gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
wakeup-source;
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
index 1e33859de484..1a5156951492 100644
--- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -20,14 +20,14 @@ user_buttons: user-buttons {
pinctrl-names = "default";
pinctrl-0 = <&user_button_pins>;
- button@0 {
+ button-0 {
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
- button@1 {
+ button-1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index 8c7376d64bc4..fd90f3b8fc32 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -30,7 +30,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 55467bc30fa6..633e5a032463 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -31,7 +31,7 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index c4d1d142d8c6..80e0f07c8e87 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -28,7 +28,7 @@ button-recovery {
gpio-keys {
compatible = "gpio-keys";
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index 05112c25176d..700bb548d6b2 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -32,7 +32,7 @@ lid_switch: lid-switch {
pinctrl-names = "default";
pinctrl-0 = <&ap_lid_int_l>;
- lid {
+ switch-lid {
label = "Lid";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
wakeup-source;
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 82fc6fba9999..dcdcc55c4098 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -21,14 +21,14 @@ volume_buttons: volume-buttons {
pinctrl-names = "default";
pinctrl-0 = <&volum_down_l &volum_up_l>;
- volum_down {
+ key-volum-down {
label = "Volum_down";
gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <100>;
};
- volum_up {
+ key-volum-up {
label = "Volum_up";
gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 4e9fdb0f722d..e2a4e6232eb5 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -45,7 +45,7 @@ &edp {
&lid_switch {
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
- power {
+ key-power {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 54a6838d73f5..e406c8c7c7e5 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -29,7 +29,7 @@ power_button: power-button {
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
- power {
+ key-power {
label = "Power";
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 28/40] ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties
2022-06-16 0:52 ` Krzysztof Kozlowski
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Heiko Stuebner,
Rob Herring, Krzysztof Kozlowski, linux-arm-kernel,
linux-rockchip, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/rk3288-tinker.dtsi | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 9c1e38c54eae..09618bb7d872 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -26,14 +26,12 @@ ext_gmac: external-gmac-clock {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- button@0 {
+ button {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 28/40] ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Heiko Stuebner,
Rob Herring, Krzysztof Kozlowski, linux-arm-kernel,
linux-rockchip, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/rk3288-tinker.dtsi | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 9c1e38c54eae..09618bb7d872 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -26,14 +26,12 @@ ext_gmac: external-gmac-clock {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- button@0 {
+ button {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
--
2.34.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 28/40] ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Heiko Stuebner,
Rob Herring, Krzysztof Kozlowski, linux-arm-kernel,
linux-rockchip, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/rk3288-tinker.dtsi | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 9c1e38c54eae..09618bb7d872 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -26,14 +26,12 @@ ext_gmac: external-gmac-clock {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&pwrbtn>;
- button@0 {
+ button {
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 29/40] arm64: dts: ti: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Nishanth Menon,
Vignesh Raghavendra, Tero Kristo, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 4 ++--
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 57497cb1ed68..31039f7e36ac 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -73,13 +73,13 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&push_button_pins_default>;
- sw5 {
+ switch-5 {
label = "GPIO Key USER1";
linux,code = <BTN_0>;
gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
};
- sw6 {
+ switch-6 {
label = "GPIO Key USER2";
linux,code = <BTN_1>;
gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 2bc26a296496..b1691ac3442d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -26,13 +26,13 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>;
- sw10: sw10 {
+ sw10: switch-10 {
label = "GPIO Key USER1";
linux,code = <BTN_0>;
gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
};
- sw11: sw11 {
+ sw11: switch-11 {
label = "GPIO Key USER2";
linux,code = <BTN_1>;
gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 29/40] arm64: dts: ti: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Nishanth Menon,
Vignesh Raghavendra, Tero Kristo, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 4 ++--
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 57497cb1ed68..31039f7e36ac 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -73,13 +73,13 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&push_button_pins_default>;
- sw5 {
+ switch-5 {
label = "GPIO Key USER1";
linux,code = <BTN_0>;
gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
};
- sw6 {
+ switch-6 {
label = "GPIO Key USER2";
linux,code = <BTN_1>;
gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 2bc26a296496..b1691ac3442d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -26,13 +26,13 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>;
- sw10: sw10 {
+ sw10: switch-10 {
label = "GPIO Key USER1";
linux,code = <BTN_0>;
gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>;
};
- sw11: sw11 {
+ sw11: switch-11 {
label = "GPIO Key USER2";
linux,code = <BTN_1>;
gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 30/40] arm64: dts: xilinx: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Michal Simek, devicetree, linux-arm-kernel,
linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index bb2602dd2805..20e83ca47b5d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -52,7 +52,7 @@ memory@0 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- fwuen {
+ key-fwuen {
label = "fwuen";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index f6aad4159ccd..d61a297a2090 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -49,7 +49,7 @@ memory@0 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw4 {
+ switch-4 {
label = "sw4";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 7b9a88b125d1..5fd6b70a154a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -47,7 +47,7 @@ memory@0 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw19 {
+ switch-19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 20b7c75bb1d3..e2dd72fe33ce 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -47,7 +47,7 @@ memory@0 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw19 {
+ switch-19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index e36df6adbeee..d685d8fbc36a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -47,7 +47,7 @@ memory@0 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw19 {
+ switch-19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 30/40] arm64: dts: xilinx: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Michal Simek, devicetree, linux-arm-kernel,
linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index bb2602dd2805..20e83ca47b5d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -52,7 +52,7 @@ memory@0 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- fwuen {
+ key-fwuen {
label = "fwuen";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index f6aad4159ccd..d61a297a2090 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -49,7 +49,7 @@ memory@0 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw4 {
+ switch-4 {
label = "sw4";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 7b9a88b125d1..5fd6b70a154a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -47,7 +47,7 @@ memory@0 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw19 {
+ switch-19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 20b7c75bb1d3..e2dd72fe33ce 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -47,7 +47,7 @@ memory@0 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw19 {
+ switch-19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index e36df6adbeee..d685d8fbc36a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -47,7 +47,7 @@ memory@0 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw19 {
+ switch-19 {
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 31/40] ARM: dts: xilinx: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Michal Simek, devicetree, linux-arm-kernel,
linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/zynq-zc702.dts | 4 ++--
arch/arm/boot/dts/zynq-zturn-common.dtsi | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cf70aff26c66..d23201ba8cd7 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -30,14 +30,14 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw14 {
+ switch-14 {
label = "sw14";
gpios = <&gpio0 12 0>;
linux,code = <108>; /* down */
wakeup-source;
autorepeat;
};
- sw13 {
+ switch-13 {
label = "sw13";
gpios = <&gpio0 14 0>;
linux,code = <103>; /* up */
diff --git a/arch/arm/boot/dts/zynq-zturn-common.dtsi b/arch/arm/boot/dts/zynq-zturn-common.dtsi
index bf5d1c4568b0..dfb1fbafe3aa 100644
--- a/arch/arm/boot/dts/zynq-zturn-common.dtsi
+++ b/arch/arm/boot/dts/zynq-zturn-common.dtsi
@@ -49,7 +49,7 @@ usr-led2 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- K1 {
+ key {
label = "K1";
gpios = <&gpio0 0x32 0x1>;
linux,code = <0x66>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 31/40] ARM: dts: xilinx: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Michal Simek, devicetree, linux-arm-kernel,
linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/zynq-zc702.dts | 4 ++--
arch/arm/boot/dts/zynq-zturn-common.dtsi | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index cf70aff26c66..d23201ba8cd7 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -30,14 +30,14 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- sw14 {
+ switch-14 {
label = "sw14";
gpios = <&gpio0 12 0>;
linux,code = <108>; /* down */
wakeup-source;
autorepeat;
};
- sw13 {
+ switch-13 {
label = "sw13";
gpios = <&gpio0 14 0>;
linux,code = <103>; /* up */
diff --git a/arch/arm/boot/dts/zynq-zturn-common.dtsi b/arch/arm/boot/dts/zynq-zturn-common.dtsi
index bf5d1c4568b0..dfb1fbafe3aa 100644
--- a/arch/arm/boot/dts/zynq-zturn-common.dtsi
+++ b/arch/arm/boot/dts/zynq-zturn-common.dtsi
@@ -49,7 +49,7 @@ usr-led2 {
gpio-keys {
compatible = "gpio-keys";
autorepeat;
- K1 {
+ key {
label = "K1";
gpios = <&gpio0 0x32 0x1>;
linux,code = <0x66>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 32/40] ARM: dts: omap: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
` (32 preceding siblings ...)
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
-1 siblings, 1 reply; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Benoît Cousson,
Tony Lindgren, Rob Herring, Krzysztof Kozlowski, linux-omap,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/am335x-evm.dts | 6 +++---
arch/arm/boot/dts/am335x-shc.dts | 6 +++---
arch/arm/boot/dts/am3517-evm-ui.dtsi | 20 ++++++++++----------
arch/arm/boot/dts/am3517-evm.dts | 18 +++++++++---------
arch/arm/boot/dts/am437x-idk-evm.dts | 2 +-
5 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index b9745a2f0e4d..730898310641 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -92,20 +92,20 @@ &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */
0x0201006c>; /* DOWN */
};
- gpio_keys: volume_keys0 {
+ gpio_keys: volume-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
- switch9 {
+ switch-9 {
label = "volume-up";
linux,code = <115>;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- switch10 {
+ switch-10 {
label = "volume-down";
linux,code = <114>;
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
index 6b9877560741..c497200f9cb0 100644
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -36,10 +36,10 @@ cpu@0 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- back_button {
+ back-button {
label = "Back Button";
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_BACK>;
@@ -47,7 +47,7 @@ back_button {
wakeup-source;
};
- front_button {
+ front-button {
label = "Front Button";
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_FRONT>;
diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi
index 7d8f32bf70db..5a1c3eec12db 100644
--- a/arch/arm/boot/dts/am3517-evm-ui.dtsi
+++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi
@@ -70,61 +70,61 @@ expander-keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
- record {
+ key-record {
label = "Record";
/* linux,code = <BTN_0>; */
gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
};
- play {
+ key-play {
label = "Play";
linux,code = <KEY_PLAY>;
gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
};
- Stop {
+ key-stop {
label = "Stop";
linux,code = <KEY_STOP>;
gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
};
- fwd {
+ key-fwd {
label = "FWD";
linux,code = <KEY_FASTFORWARD>;
gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
};
- rwd {
+ key-rwd {
label = "RWD";
linux,code = <KEY_REWIND>;
gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
};
- shift {
+ key-shift {
label = "Shift";
linux,code = <KEY_LEFTSHIFT>;
gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
};
- Mode {
+ key-mode {
label = "Mode";
linux,code = <BTN_MODE>;
gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
};
- Menu {
+ key-menu {
label = "Menu";
linux,code = <KEY_MENU>;
gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
};
- Up {
+ key-up {
label = "Up";
linux,code = <KEY_UP>;
gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
};
- Down {
+ key-down {
label = "Down";
linux,code = <KEY_DOWN>;
gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index c8b80f156ec9..35b653014f2b 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -37,55 +37,55 @@ gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
- user_pb {
+ button-user {
label = "User Push Button";
linux,code = <BTN_0>;
gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
};
- user_sw_1 {
+ switch-1 {
label = "User Switch 1";
linux,code = <BTN_1>;
gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
};
- user_sw_2 {
+ switch-2 {
label = "User Switch 2";
linux,code = <BTN_2>;
gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
};
- user_sw_3 {
+ switch-3 {
label = "User Switch 3";
linux,code = <BTN_3>;
gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
};
- user_sw_4 {
+ switch-4 {
label = "User Switch 4";
linux,code = <BTN_4>;
gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
};
- user_sw_5 {
+ switch-5 {
label = "User Switch 5";
linux,code = <BTN_5>;
gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
};
- user_sw_6 {
+ switch-6 {
label = "User Switch 6";
linux,code = <BTN_6>;
gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
};
- user_sw_7 {
+ switch-7 {
label = "User Switch 7";
linux,code = <BTN_7>;
gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
};
- user_sw_8 {
+ switch-8 {
label = "User Switch 8";
linux,code = <BTN_8>;
gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 5a74b83145cf..d46cd721f27e 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -98,7 +98,7 @@ v1_5d: fixed-regulator-v1_5d{
vin-supply = <&v1_5dreg>;
};
- gpio_keys: gpio_keys {
+ gpio_keys: gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pins_default>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 33/40] ARM: dts: omap: correct gpio-keys properties
2022-06-16 0:52 ` Krzysztof Kozlowski
` (33 preceding siblings ...)
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
-1 siblings, 1 reply; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Benoît Cousson,
Tony Lindgren, Rob Herring, Krzysztof Kozlowski, linux-omap,
devicetree, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/am335x-evm.dts | 2 --
arch/arm/boot/dts/am335x-guardian.dts | 2 --
arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi | 4 +---
arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi | 4 +---
arch/arm/boot/dts/am335x-pcm-953.dtsi | 4 ++--
arch/arm/boot/dts/am335x-pepper.dts | 8 +++-----
arch/arm/boot/dts/am437x-idk-evm.dts | 4 +---
7 files changed, 8 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 730898310641..25c6ac9913d2 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -94,8 +94,6 @@ &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */
gpio_keys: volume-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
autorepeat;
switch-9 {
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
index 1a7e187b1953..f6356266564c 100644
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -33,8 +33,6 @@ guardian_buttons: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&guardian_button_pins>;
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
select-button {
label = "guardian-select-button";
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 92a0e98ec231..7b40ca9483ca 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -166,10 +166,8 @@ &mmc2 {
&buttons {
pinctrl-names = "default";
pinctrl-0 = <&push_button_pins>;
- #address-cells = <1>;
- #size-cells = <0>;
- button@0 {
+ button-0 {
label = "push_button";
linux,code = <0x100>;
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index e7e439a0630a..e0364adb8393 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -378,10 +378,8 @@ &mmc3 {
&buttons {
pinctrl-names = "default";
pinctrl-0 = <&push_button_pins>;
- #address-cells = <1>;
- #size-cells = <0>;
- button@0 {
+ button-0 {
label = "push_button";
linux,code = <0x100>;
gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
index 124026fa0d09..dae448040a97 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -54,14 +54,14 @@ user_buttons: user_buttons {
pinctrl-names = "default";
pinctrl-0 = <&user_buttons_pins>;
- button@0 {
+ button-0 {
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
- button@1 {
+ button-1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index b5e88e627bc1..8691eec33b61 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -596,24 +596,22 @@ led1 {
&buttons {
pinctrl-names = "default";
pinctrl-0 = <&user_buttons_pins>;
- #address-cells = <1>;
- #size-cells = <0>;
- button0 {
+ button-0 {
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- button1 {
+ button-1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- buttons2 {
+ button-2 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index d46cd721f27e..123a95f87554 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -102,10 +102,8 @@ gpio_keys: gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_pins_default>;
- #address-cells = <1>;
- #size-cells = <0>;
- switch0 {
+ switch-0 {
label = "power-button";
linux,code = <KEY_POWER>;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 34/40] ARM: dts: animeo: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
` (34 preceding siblings ...)
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-20 11:14 ` (subset) " Krzysztof Kozlowski
-1 siblings, 1 reply; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/animeo_ip.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 7da718abbd85..3fa3db2d9d02 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -168,26 +168,26 @@ tx_red {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- keyswitch_in {
+ key-switch-in {
label = "keyswitch_in";
gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
linux,code = <28>;
wakeup-source;
};
- error_in {
+ key-error-in {
label = "error_in";
gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
linux,code = <29>;
wakeup-source;
};
- btn {
+ key-s {
label = "btn";
gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
linux,code = <31>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 35/40] ARM: dts: animeo: correct gpio-keys properties
2022-06-16 0:52 ` Krzysztof Kozlowski
` (35 preceding siblings ...)
(?)
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-20 11:14 ` (subset) " Krzysztof Kozlowski
-1 siblings, 1 reply; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, devicetree, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/animeo_ip.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 3fa3db2d9d02..29936bfbeeb7 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -170,8 +170,6 @@ tx_red {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
key-switch-in {
label = "keyswitch_in";
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 36/40] ARM: dts: aspeed: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 30 ++++++------
.../boot/dts/aspeed-bmc-bytedance-g220a.dts | 48 +++++++++----------
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 8 ++--
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 12 ++---
.../boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 22 ++++-----
arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 23 ++++-----
arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 20 ++++----
arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 30 ++++++------
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 12 ++---
arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 4 +-
.../boot/dts/aspeed-bmc-opp-witherspoon.dts | 16 +++----
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 4 +-
15 files changed, 118 insertions(+), 117 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 1b2e7ad37566..82a6f14a45f0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -100,91 +100,91 @@ identify {
gpio-keys {
compatible = "gpio-keys";
- shutdown_ack {
+ event-shutdown-ack {
label = "SHUTDOWN_ACK";
gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(G, 2)>;
};
- reboot_ack {
+ event-reboot-ack {
label = "REBOOT_ACK";
gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 3)>;
};
- S0_overtemp {
+ event-s0-overtemp {
label = "S0_OVERTEMP";
gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(G, 3)>;
};
- S0_hightemp {
+ event-s0-hightemp {
label = "S0_HIGHTEMP";
gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 0)>;
};
- S0_cpu_fault {
+ event-s0-cpu-fault {
label = "S0_CPU_FAULT";
gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
linux,code = <ASPEED_GPIO(J, 1)>;
};
- S0_scp_auth_fail {
+ event-s0-scp-auth-fail {
label = "S0_SCP_AUTH_FAIL";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- S1_scp_auth_fail {
+ event-s1-scp-auth-fail {
label = "S1_SCP_AUTH_FAIL";
gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 5)>;
};
- S1_overtemp {
+ event-s1-overtemp {
label = "S1_OVERTEMP";
gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 6)>;
};
- S1_hightemp {
+ event-s1-hightemp {
label = "S1_HIGHTEMP";
gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(AB, 0)>;
};
- S1_cpu_fault {
+ event-s1-cpu-fault {
label = "S1_CPU_FAULT";
gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
linux,code = <ASPEED_GPIO(Z, 1)>;
};
- id_button {
+ event-id {
label = "ID_BUTTON";
gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Q, 5)>;
};
- psu1_vin_good {
+ event-psu1-vin-good {
label = "PSU1_VIN_GOOD";
gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 4)>;
};
- psu2_vin_good {
+ event-psu2-vin-good {
label = "PSU2_VIN_GOOD";
gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 5)>;
};
- psu1_present {
+ event-psu1-present {
label = "PSU1_PRESENT";
gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(I, 0)>;
};
- psu2_present {
+ event-psu2-present {
label = "PSU2_PRESENT";
gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(I, 1)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
index 0d1fb5ccfd36..f75cad41ae6f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
@@ -100,7 +100,7 @@ bmc_alive {
gpio-keys {
compatible = "gpio-keys";
- burn-in-signal {
+ event-burn-in-signal {
label = "burn-in";
gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(R, 5)>;
@@ -111,139 +111,139 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- rear-riser1-presence {
+ event-rear-riser1-presence {
label = "rear-riser1-presence";
gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
linux,code = <1>;
};
- alrt-pvddq-cpu0 {
+ event-alrt-pvddq-cpu0 {
label = "alrt-pvddq-cpu0";
gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
linux,code = <2>;
};
- rear-riser0-presence {
+ event-rear-riser0-presence {
label = "rear-riser0-presence";
gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
linux,code = <3>;
};
- fault-pvddq-cpu0 {
+ event-fault-pvddq-cpu0 {
label = "fault-pvddq-cpu0";
gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- alrt-pvddq-cpu1 {
+ event-alrt-pvddq-cpu1 {
label = "alrt-pvddq-cpu1";
gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fault-pvddq-cpu1 {
+ event-fault-pvddq-cpu1 {
label = "alrt-pvddq-cpu1";
gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fault-pvccin-cpu1 {
+ event-fault-pvccin-cpu1 {
label = "fault-pvccin-cpuq";
gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- bmc-rom0-wp {
+ event-bmc-rom0-wp {
label = "bmc-rom0-wp";
gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
linux,code = <8>;
};
- bmc-rom1-wp {
+ event-bmc-rom1-wp {
label = "bmc-rom1-wp";
gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
linux,code = <14>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
linux,code = <15>;
};
- front-bp1-presence {
+ event-front-bp1-presence {
label = "front-bp1-presence";
gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
linux,code = <16>;
};
- rear-bp-presence {
+ event-rear-bp-presence {
label = "rear-bp-presence";
gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
linux,code = <17>;
};
- fault-pvccin-cpu0 {
+ event-fault-pvccin-cpu0 {
label = "fault-pvccin-cpu0";
gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
linux,code = <18>;
};
- alrt-p1v05-pvcc {
+ event-alrt-p1v05-pvcc {
label = "alrt-p1v05-pvcc1";
gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
linux,code = <19>;
};
- fault-p1v05-pvccio {
+ event-fault-p1v05-pvccio {
label = "alrt-p1v05-pvcc1";
gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
linux,code = <20>;
};
- alrt-p1v8-pvccio {
+ event-alrt-p1v8-pvccio {
label = "alrt-p1v8-pvccio";
gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
linux,code = <21>;
};
- fault-p1v8-pvccio {
+ event-fault-p1v8-pvccio {
label = "fault-p1v8-pvccio";
gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
linux,code = <22>;
};
- front-bp0-presence {
+ event-front-bp0-presence {
label = "front-bp0-presence";
gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
linux,code = <23>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 382da7934eaa..afad8d732cc3 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -193,25 +193,25 @@ gpio-keys-polled {
#size-cells = <0>;
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
linux,code = <15>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
linux,code = <14>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 7213434695bf..fc8222ea2dd0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -183,37 +183,37 @@ gpio-keys-polled {
#size-cells = <0>;
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
linux,code = <8>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
linux,code = <11>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
index 60a39ea10ab1..208b0f094ed9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -73,19 +73,19 @@ fsi: gpio-fsi {
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(B, 3)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 0)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 1)>;
@@ -97,49 +97,49 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
linux,code = <1>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
linux,code = <2>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
linux,code = <3>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan6-presence {
+ event-fan6-presence {
label = "fan6-presence";
gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- fan7-presence {
+ event-fan7-presence {
label = "fan7-presence";
gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
linux,code = <8>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index a52a289cee85..48776fb663fb 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -92,30 +92,31 @@ video_engine_memory: jpegbuffer {
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 6)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 2)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 0)>;
};
- id-button {
+
+ button-id {
label = "id-button";
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 1)>;
@@ -126,37 +127,37 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
linux,code = <14>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
index 7d38d121ec6d..31ff19ef87a0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
@@ -46,31 +46,31 @@ video_engine_memory: jpegbuffer {
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 6)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 2)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 0)>;
};
- id-button {
+ button-id {
label = "id-button";
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 1)>;
@@ -81,31 +81,31 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
index 3d4bdad27c2d..ac0d666ca10e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
@@ -96,7 +96,7 @@ fsi: gpio-fsi {
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index cd660c1ff3f5..45631b47a7b3 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -73,7 +73,7 @@ fsi: gpio-fsi {
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(P, 5)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 084f54866f38..893e621ecab1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -87,7 +87,7 @@ fsi: gpio-fsi {
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
index 4816486c0c9e..bbf864f84d37 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@@ -38,37 +38,37 @@ gfx_memory: framebuffer {
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(B, 5)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(R, 7)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(N, 0)>;
};
- oppanel-presence {
+ event-oppanel-presence {
label = "oppanel-presence";
gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(A, 7)>;
};
- opencapi-riser-presence {
+ event-opencapi-riser-presence {
label = "opencapi-riser-presence";
gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(I, 0)>;
@@ -84,55 +84,55 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- scm0-presence {
+ event-scm0-presence {
label = "scm0-presence";
gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- scm1-presence {
+ event-scm1-presence {
label = "scm1-presence";
gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- cpu0vrm-presence {
+ event-cpu0vrm-presence {
label = "cpu0vrm-presence";
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- cpu1vrm-presence {
+ event-cpu1vrm-presence {
label = "cpu1vrm-presence";
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
linux,code = <8>;
};
- fanboost-presence {
+ event-fanboost-presence {
label = "fanboost-presence";
gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index 72b7a6639ed9..6f6a35fe2caf 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -50,13 +50,13 @@ vga_memory: region@bf000000 {
gpio-keys {
compatible = "gpio-keys";
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 3)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(E, 5)>;
@@ -69,25 +69,25 @@ gpio-keys-polled {
#size-cells = <0>;
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
index 328ef472c479..8a7fb55ab489 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -63,13 +63,13 @@ alarm_yel {
gpio-keys {
compatible = "gpio-keys";
- button_checkstop {
+ event-checkstop {
label = "checkstop";
linux,code = <74>;
gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
};
- button_identify {
+ event-identify {
label = "identify";
linux,code = <152>;
gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 230f3584bcab..a20a532fc280 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -51,25 +51,25 @@ video_engine_memory: jpegbuffer {
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(B, 5)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(P, 7)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(N, 0)>;
@@ -85,25 +85,25 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
index 7ae4ea0d2931..0cb7b20ff3ab 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -58,13 +58,13 @@ onewire3 {
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 7)>;
};
- pcie-e2b-present{
+ event-pcie-e2b-present{
label = "pcie-e2b-present";
gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(E, 7)>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 36/40] ARM: dts: aspeed: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 30 ++++++------
.../boot/dts/aspeed-bmc-bytedance-g220a.dts | 48 +++++++++----------
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 8 ++--
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 12 ++---
.../boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 22 ++++-----
arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 23 ++++-----
arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 20 ++++----
arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 2 +-
arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 30 ++++++------
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 12 ++---
arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 4 +-
.../boot/dts/aspeed-bmc-opp-witherspoon.dts | 16 +++----
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 4 +-
15 files changed, 118 insertions(+), 117 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 1b2e7ad37566..82a6f14a45f0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -100,91 +100,91 @@ identify {
gpio-keys {
compatible = "gpio-keys";
- shutdown_ack {
+ event-shutdown-ack {
label = "SHUTDOWN_ACK";
gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(G, 2)>;
};
- reboot_ack {
+ event-reboot-ack {
label = "REBOOT_ACK";
gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 3)>;
};
- S0_overtemp {
+ event-s0-overtemp {
label = "S0_OVERTEMP";
gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(G, 3)>;
};
- S0_hightemp {
+ event-s0-hightemp {
label = "S0_HIGHTEMP";
gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 0)>;
};
- S0_cpu_fault {
+ event-s0-cpu-fault {
label = "S0_CPU_FAULT";
gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
linux,code = <ASPEED_GPIO(J, 1)>;
};
- S0_scp_auth_fail {
+ event-s0-scp-auth-fail {
label = "S0_SCP_AUTH_FAIL";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- S1_scp_auth_fail {
+ event-s1-scp-auth-fail {
label = "S1_SCP_AUTH_FAIL";
gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 5)>;
};
- S1_overtemp {
+ event-s1-overtemp {
label = "S1_OVERTEMP";
gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 6)>;
};
- S1_hightemp {
+ event-s1-hightemp {
label = "S1_HIGHTEMP";
gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(AB, 0)>;
};
- S1_cpu_fault {
+ event-s1-cpu-fault {
label = "S1_CPU_FAULT";
gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
linux,code = <ASPEED_GPIO(Z, 1)>;
};
- id_button {
+ event-id {
label = "ID_BUTTON";
gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Q, 5)>;
};
- psu1_vin_good {
+ event-psu1-vin-good {
label = "PSU1_VIN_GOOD";
gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 4)>;
};
- psu2_vin_good {
+ event-psu2-vin-good {
label = "PSU2_VIN_GOOD";
gpios = <&gpio ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 5)>;
};
- psu1_present {
+ event-psu1-present {
label = "PSU1_PRESENT";
gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(I, 0)>;
};
- psu2_present {
+ event-psu2-present {
label = "PSU2_PRESENT";
gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(I, 1)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
index 0d1fb5ccfd36..f75cad41ae6f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
@@ -100,7 +100,7 @@ bmc_alive {
gpio-keys {
compatible = "gpio-keys";
- burn-in-signal {
+ event-burn-in-signal {
label = "burn-in";
gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(R, 5)>;
@@ -111,139 +111,139 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- rear-riser1-presence {
+ event-rear-riser1-presence {
label = "rear-riser1-presence";
gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
linux,code = <1>;
};
- alrt-pvddq-cpu0 {
+ event-alrt-pvddq-cpu0 {
label = "alrt-pvddq-cpu0";
gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
linux,code = <2>;
};
- rear-riser0-presence {
+ event-rear-riser0-presence {
label = "rear-riser0-presence";
gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
linux,code = <3>;
};
- fault-pvddq-cpu0 {
+ event-fault-pvddq-cpu0 {
label = "fault-pvddq-cpu0";
gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- alrt-pvddq-cpu1 {
+ event-alrt-pvddq-cpu1 {
label = "alrt-pvddq-cpu1";
gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fault-pvddq-cpu1 {
+ event-fault-pvddq-cpu1 {
label = "alrt-pvddq-cpu1";
gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fault-pvccin-cpu1 {
+ event-fault-pvccin-cpu1 {
label = "fault-pvccin-cpuq";
gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- bmc-rom0-wp {
+ event-bmc-rom0-wp {
label = "bmc-rom0-wp";
gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
linux,code = <8>;
};
- bmc-rom1-wp {
+ event-bmc-rom1-wp {
label = "bmc-rom1-wp";
gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
linux,code = <14>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
linux,code = <15>;
};
- front-bp1-presence {
+ event-front-bp1-presence {
label = "front-bp1-presence";
gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
linux,code = <16>;
};
- rear-bp-presence {
+ event-rear-bp-presence {
label = "rear-bp-presence";
gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
linux,code = <17>;
};
- fault-pvccin-cpu0 {
+ event-fault-pvccin-cpu0 {
label = "fault-pvccin-cpu0";
gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
linux,code = <18>;
};
- alrt-p1v05-pvcc {
+ event-alrt-p1v05-pvcc {
label = "alrt-p1v05-pvcc1";
gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
linux,code = <19>;
};
- fault-p1v05-pvccio {
+ event-fault-p1v05-pvccio {
label = "alrt-p1v05-pvcc1";
gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
linux,code = <20>;
};
- alrt-p1v8-pvccio {
+ event-alrt-p1v8-pvccio {
label = "alrt-p1v8-pvccio";
gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
linux,code = <21>;
};
- fault-p1v8-pvccio {
+ event-fault-p1v8-pvccio {
label = "fault-p1v8-pvccio";
gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
linux,code = <22>;
};
- front-bp0-presence {
+ event-front-bp0-presence {
label = "front-bp0-presence";
gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
linux,code = <23>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 382da7934eaa..afad8d732cc3 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -193,25 +193,25 @@ gpio-keys-polled {
#size-cells = <0>;
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
linux,code = <15>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
linux,code = <14>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 7213434695bf..fc8222ea2dd0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -183,37 +183,37 @@ gpio-keys-polled {
#size-cells = <0>;
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
linux,code = <8>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
linux,code = <11>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
index 60a39ea10ab1..208b0f094ed9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -73,19 +73,19 @@ fsi: gpio-fsi {
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(B, 3)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 0)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 1)>;
@@ -97,49 +97,49 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
linux,code = <1>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
linux,code = <2>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
linux,code = <3>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan6-presence {
+ event-fan6-presence {
label = "fan6-presence";
gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- fan7-presence {
+ event-fan7-presence {
label = "fan7-presence";
gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
linux,code = <8>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index a52a289cee85..48776fb663fb 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -92,30 +92,31 @@ video_engine_memory: jpegbuffer {
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 6)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 2)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 0)>;
};
- id-button {
+
+ button-id {
label = "id-button";
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 1)>;
@@ -126,37 +127,37 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan5-presence {
+ event-fan5-presence {
label = "fan5-presence";
gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
linux,code = <14>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
index 7d38d121ec6d..31ff19ef87a0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
@@ -46,31 +46,31 @@ video_engine_memory: jpegbuffer {
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 6)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 2)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Z, 0)>;
};
- id-button {
+ button-id {
label = "id-button";
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 1)>;
@@ -81,31 +81,31 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- fan4-presence {
+ event-fan4-presence {
label = "fan4-presence";
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
index 3d4bdad27c2d..ac0d666ca10e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
@@ -96,7 +96,7 @@ fsi: gpio-fsi {
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index cd660c1ff3f5..45631b47a7b3 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -73,7 +73,7 @@ fsi: gpio-fsi {
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(P, 5)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 084f54866f38..893e621ecab1 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -87,7 +87,7 @@ fsi: gpio-fsi {
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
index 4816486c0c9e..bbf864f84d37 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@@ -38,37 +38,37 @@ gfx_memory: framebuffer {
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(B, 5)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(R, 7)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(N, 0)>;
};
- oppanel-presence {
+ event-oppanel-presence {
label = "oppanel-presence";
gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(A, 7)>;
};
- opencapi-riser-presence {
+ event-opencapi-riser-presence {
label = "opencapi-riser-presence";
gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(I, 0)>;
@@ -84,55 +84,55 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- scm0-presence {
+ event-scm0-presence {
label = "scm0-presence";
gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- scm1-presence {
+ event-scm1-presence {
label = "scm1-presence";
gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- cpu0vrm-presence {
+ event-cpu0vrm-presence {
label = "cpu0vrm-presence";
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
- cpu1vrm-presence {
+ event-cpu1vrm-presence {
label = "cpu1vrm-presence";
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
linux,code = <8>;
};
- fanboost-presence {
+ event-fanboost-presence {
label = "fanboost-presence";
gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
linux,code = <9>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index 72b7a6639ed9..6f6a35fe2caf 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -50,13 +50,13 @@ vga_memory: region@bf000000 {
gpio-keys {
compatible = "gpio-keys";
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(H, 3)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(E, 5)>;
@@ -69,25 +69,25 @@ gpio-keys-polled {
#size-cells = <0>;
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
index 328ef472c479..8a7fb55ab489 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -63,13 +63,13 @@ alarm_yel {
gpio-keys {
compatible = "gpio-keys";
- button_checkstop {
+ event-checkstop {
label = "checkstop";
linux,code = <74>;
gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
};
- button_identify {
+ event-identify {
label = "identify";
linux,code = <152>;
gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 230f3584bcab..a20a532fc280 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -51,25 +51,25 @@ video_engine_memory: jpegbuffer {
gpio-keys {
compatible = "gpio-keys";
- air-water {
+ event-air-water {
label = "air-water";
gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(B, 5)>;
};
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
- ps0-presence {
+ event-ps0-presence {
label = "ps0-presence";
gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(P, 7)>;
};
- ps1-presence {
+ event-ps1-presence {
label = "ps1-presence";
gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(N, 0)>;
@@ -85,25 +85,25 @@ gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
- fan0-presence {
+ event-fan0-presence {
label = "fan0-presence";
gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
- fan1-presence {
+ event-fan1-presence {
label = "fan1-presence";
gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
- fan2-presence {
+ event-fan2-presence {
label = "fan2-presence";
gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
- fan3-presence {
+ event-fan3-presence {
label = "fan3-presence";
gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
linux,code = <7>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
index 7ae4ea0d2931..0cb7b20ff3ab 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -58,13 +58,13 @@ onewire3 {
gpio-keys {
compatible = "gpio-keys";
- checkstop {
+ event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 7)>;
};
- pcie-e2b-present{
+ event-pcie-e2b-present{
label = "pcie-e2b-present";
gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(E, 7)>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 37/40] ARM: dts: aspeed: correct gpio-keys properties
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 2 --
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 2 --
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 2 --
3 files changed, 6 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index afad8d732cc3..a6a2bc3b855c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -189,8 +189,6 @@ vga_memory: region@bf000000 {
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
event-fan0-presence {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index fc8222ea2dd0..bf59a9962379 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -179,8 +179,6 @@ pcieslot-power {
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
event-fan0-presence {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index 6f6a35fe2caf..3f6010ef2b86 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -65,8 +65,6 @@ event-ps1-presence {
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
event-fan0-presence {
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 37/40] ARM: dts: aspeed: correct gpio-keys properties
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery, devicetree,
linux-arm-kernel, linux-aspeed, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 2 --
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 2 --
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 2 --
3 files changed, 6 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index afad8d732cc3..a6a2bc3b855c 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -189,8 +189,6 @@ vga_memory: region@bf000000 {
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
event-fan0-presence {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index fc8222ea2dd0..bf59a9962379 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -179,8 +179,6 @@ pcieslot-power {
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
event-fan0-presence {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index 6f6a35fe2caf..3f6010ef2b86 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -65,8 +65,6 @@ event-ps1-presence {
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <1000>;
event-fan0-presence {
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 38/40] ARM: dts: at91: align gpio-key node names with dtschema
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Nicolas Ferre, Alexandre Belloni,
Claudiu Beznea, Peter Rosin, devicetree, linux-arm-kernel,
linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v2:
1. at91-sam9x60ek.dts, at91-sama5d27_wlsom1_ek.dts,
at91-sama5d2_icp.dts: different names according to discussion.
---
arch/arm/boot/dts/at91-foxg20.dts | 4 ++--
arch/arm/boot/dts/at91-gatwick.dts | 2 +-
arch/arm/boot/dts/at91-kizbox.dts | 6 +++---
arch/arm/boot/dts/at91-kizbox2-common.dtsi | 8 ++++----
arch/arm/boot/dts/at91-kizbox3-hs.dts | 12 ++++++------
arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 4 ++--
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
arch/arm/boot/dts/at91-qil_a9260.dts | 2 +-
arch/arm/boot/dts/at91-sam9x60ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d2_icp.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d4ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama7g5ek.dts | 4 ++--
arch/arm/boot/dts/at91-wb45n.dts | 2 +-
arch/arm/boot/dts/at91-wb50n.dts | 2 +-
arch/arm/boot/dts/at91sam9260ek.dts | 6 +++---
arch/arm/boot/dts/at91sam9261ek.dts | 10 +++++-----
arch/arm/boot/dts/at91sam9263ek.dts | 6 +++---
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 +++---
.../dts/at91sam9g25-gardena-smart-gateway.dts | 2 +-
arch/arm/boot/dts/at91sam9m10g45ek.dts | 16 ++++++++--------
arch/arm/boot/dts/at91sam9n12ek.dts | 4 ++--
arch/arm/boot/dts/at91sam9rlek.dts | 6 +++---
28 files changed, 70 insertions(+), 70 deletions(-)
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index 7edf057047f8..9dfd5de808d1 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -155,10 +155,10 @@ user_led {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- btn {
+ button {
label = "Button";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
index 5a81cab5fc3a..2c718cf84d7b 100644
--- a/arch/arm/boot/dts/at91-gatwick.dts
+++ b/arch/arm/boot/dts/at91-gatwick.dts
@@ -13,7 +13,7 @@ / {
model = "Laird Workgroup Bridge 50N - Project Gatwick";
compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
autorepeat;
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 3b8812fcd854..87e972eb2ba6 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -28,19 +28,19 @@ main_xtal {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- reset {
+ button-reset {
label = "PB_RST";
gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
wakeup-source;
};
- user {
+ button-user {
label = "PB_USER";
gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index c08834ddf07b..ed7146e23147 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -31,26 +31,26 @@ main_xtal {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- prog {
+ button-prog {
label = "PB_PROG";
gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};
- reset {
+ button-reset {
label = "PB_RST";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
wakeup-source;
};
- user {
+ button-user {
label = "PB_USER";
gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
index 2799b2a1f4d2..f76e2e0b41ae 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -55,7 +55,7 @@ led-6 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default" , "default", "default",
"default", "default" ;
@@ -68,35 +68,35 @@ &pinctrl_pio_io_reset
&pinctrl_pio_zbe_rst>;
pinctrl-4 = <&pinctrl_pio_input>;
- SW1 {
+ switch-1 {
label = "SW1";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
linux,code = <0x101>;
wakeup-source;
};
- SW2 {
+ switch-2 {
label = "SW2";
gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};
- SW3 {
+ switch-3 {
label = "SW3";
gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};
- SW7 {
+ switch-7 {
label = "SW7";
gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
linux,code = <0x107>;
wakeup-source;
};
- SW8 {
+ switch-8 {
label = "SW8";
gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
linux,code = <0x108>;
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index 9c622892c692..8fb08e6fad7a 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -39,14 +39,14 @@ gpio_keys {
#address-cells = <1>;
#size-cells = <0>;
- prog {
+ key-prog {
label = "PB_PROG";
gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};
- reset {
+ key-reset {
label = "PB_RST";
gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 4f123477e631..f71377c9b757 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -18,7 +18,7 @@ / {
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "Wakeup";
linux,code = <10>;
wakeup-source;
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index 969d990767fc..d09b3d15a828 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -201,7 +201,7 @@ gpio_keys {
#address-cells = <1>;
#size-cells = <0>;
- user_pb {
+ button-user {
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 7719ea3d4933..838353a42097 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -76,13 +76,13 @@ vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
status = "okay";
- sw1 {
+ button-1 {
label = "SW1";
gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
linux,code=<KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 08f0d4b995ff..96c9290007a8 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -478,13 +478,13 @@ can1: can@fc050000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- pb4 {
+ button {
label = "USER";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 5e8755f22784..b55e8fb113b1 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -26,14 +26,14 @@ chosen {
stdout-path = "serial0:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
status = "okay";
- sw4 {
+ button-1 {
label = "USER BUTTON";
gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 806eb1d911d7..38f0e1ae6ae6 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -42,14 +42,14 @@ main_xtal {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
status = "okay";
- sw4 {
+ button-1 {
label = "USER_PB1";
gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 8ed58af01391..544c64549459 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -394,13 +394,13 @@ pinctrl_usba_vbus: usba_vbus {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- bp1 {
+ button-1 {
label = "PB_USER";
gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index cdfe891f9a9e..6799c2f475b2 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -703,13 +703,13 @@ can1: can@fc050000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- bp1 {
+ button {
label = "PB_USER";
gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index a49c2966b41e..1f42a6a981bf 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -372,13 +372,13 @@ vcc_mmc0_reg: fixedregulator_mmc0 {
regulator-always-on;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;
- bp3 {
+ button {
label = "PB_USER";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index e519d2747936..f122f302f8e0 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -242,13 +242,13 @@ rootfs@800000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;
- pb_user1 {
+ button {
label = "pb_user1";
gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 7017f626f362..fce4e93c6bee 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -269,13 +269,13 @@ rootfs@800000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;
- pb_user1 {
+ button {
label = "pb_user1";
gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index 103544620fd7..de44da2e4aae 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -45,13 +45,13 @@ main_xtal {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- bp1 {
+ button {
label = "PB_USER";
gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
index 54d130c92185..3e46b29412d1 100644
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -12,7 +12,7 @@ / {
model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
index 89f0f717f7ed..e2195bd3e4b4 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -13,7 +13,7 @@ / {
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index 6381088ba24f..bb72f050a4fe 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -144,17 +144,17 @@ nand0: nand@40000000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- btn3 {
+ button-3 {
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};
- btn4 {
+ button-4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 6fb4fe49cf1c..88869ca874d1 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -211,31 +211,31 @@ ds1 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- button_0 {
+ button-0 {
label = "button_0";
gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
linux,code = <256>;
wakeup-source;
};
- button_1 {
+ button-1 {
label = "button_1";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <257>;
wakeup-source;
};
- button_2 {
+ button-2 {
label = "button_2";
gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
linux,code = <258>;
wakeup-source;
};
- button_3 {
+ button-3 {
label = "button_3";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <259>;
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index e732565913a4..ce8baff6a9f4 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -232,17 +232,17 @@ d2 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
linux,code = <272>;
wakeup-source;
};
- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <273>;
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 85c17dd1c8d5..60d61291f344 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -234,17 +234,17 @@ wm8731: wm8731@1b {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- btn3 {
+ button-3 {
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};
- btn4 {
+ button-4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
index 7da70aeeb528..92f2c05c873f 100644
--- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
@@ -23,7 +23,7 @@ aliases {
gpio-keys {
compatible = "gpio-keys";
- user_btn1 {
+ button {
label = "USER_BTN1";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index e5db198a87a8..7f45e81ca165 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -343,48 +343,48 @@ led-3 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
linux,code = <272>;
wakeup-source;
};
- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
linux,code = <273>;
wakeup-source;
};
- left {
+ button-left {
label = "Joystick Left";
gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
linux,code = <105>;
};
- right {
+ button-right {
label = "Joystick Right";
gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
linux,code = <106>;
};
- up {
+ button-up {
label = "Joystick Up";
gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
linux,code = <103>;
};
- down {
+ button-down {
label = "Joystick Down";
gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
linux,code = <108>;
};
- enter {
+ button-enter {
label = "Joystick Press";
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index c905d7bfc771..4c644d4c6be7 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -226,10 +226,10 @@ d10 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- enter {
+ button-enter {
label = "Enter";
gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index ddaadfec6751..a57351270551 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -248,17 +248,17 @@ led-3 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,code = <273>;
wakeup-source;
};
- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,code = <272>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 38/40] ARM: dts: at91: align gpio-key node names with dtschema
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Nicolas Ferre, Alexandre Belloni,
Claudiu Beznea, Peter Rosin, devicetree, linux-arm-kernel,
linux-kernel
Cc: Krzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v2:
1. at91-sam9x60ek.dts, at91-sama5d27_wlsom1_ek.dts,
at91-sama5d2_icp.dts: different names according to discussion.
---
arch/arm/boot/dts/at91-foxg20.dts | 4 ++--
arch/arm/boot/dts/at91-gatwick.dts | 2 +-
arch/arm/boot/dts/at91-kizbox.dts | 6 +++---
arch/arm/boot/dts/at91-kizbox2-common.dtsi | 8 ++++----
arch/arm/boot/dts/at91-kizbox3-hs.dts | 12 ++++++------
arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 4 ++--
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
arch/arm/boot/dts/at91-qil_a9260.dts | 2 +-
arch/arm/boot/dts/at91-sam9x60ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d2_icp.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++--
arch/arm/boot/dts/at91-sama5d4ek.dts | 4 ++--
arch/arm/boot/dts/at91-sama7g5ek.dts | 4 ++--
arch/arm/boot/dts/at91-wb45n.dts | 2 +-
arch/arm/boot/dts/at91-wb50n.dts | 2 +-
arch/arm/boot/dts/at91sam9260ek.dts | 6 +++---
arch/arm/boot/dts/at91sam9261ek.dts | 10 +++++-----
arch/arm/boot/dts/at91sam9263ek.dts | 6 +++---
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 +++---
.../dts/at91sam9g25-gardena-smart-gateway.dts | 2 +-
arch/arm/boot/dts/at91sam9m10g45ek.dts | 16 ++++++++--------
arch/arm/boot/dts/at91sam9n12ek.dts | 4 ++--
arch/arm/boot/dts/at91sam9rlek.dts | 6 +++---
28 files changed, 70 insertions(+), 70 deletions(-)
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index 7edf057047f8..9dfd5de808d1 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -155,10 +155,10 @@ user_led {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- btn {
+ button {
label = "Button";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
index 5a81cab5fc3a..2c718cf84d7b 100644
--- a/arch/arm/boot/dts/at91-gatwick.dts
+++ b/arch/arm/boot/dts/at91-gatwick.dts
@@ -13,7 +13,7 @@ / {
model = "Laird Workgroup Bridge 50N - Project Gatwick";
compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
autorepeat;
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 3b8812fcd854..87e972eb2ba6 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -28,19 +28,19 @@ main_xtal {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- reset {
+ button-reset {
label = "PB_RST";
gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
wakeup-source;
};
- user {
+ button-user {
label = "PB_USER";
gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index c08834ddf07b..ed7146e23147 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -31,26 +31,26 @@ main_xtal {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- prog {
+ button-prog {
label = "PB_PROG";
gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};
- reset {
+ button-reset {
label = "PB_RST";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
wakeup-source;
};
- user {
+ button-user {
label = "PB_USER";
gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
linux,code = <0x101>;
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
index 2799b2a1f4d2..f76e2e0b41ae 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -55,7 +55,7 @@ led-6 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default" , "default", "default",
"default", "default" ;
@@ -68,35 +68,35 @@ &pinctrl_pio_io_reset
&pinctrl_pio_zbe_rst>;
pinctrl-4 = <&pinctrl_pio_input>;
- SW1 {
+ switch-1 {
label = "SW1";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
linux,code = <0x101>;
wakeup-source;
};
- SW2 {
+ switch-2 {
label = "SW2";
gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};
- SW3 {
+ switch-3 {
label = "SW3";
gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};
- SW7 {
+ switch-7 {
label = "SW7";
gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
linux,code = <0x107>;
wakeup-source;
};
- SW8 {
+ switch-8 {
label = "SW8";
gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
linux,code = <0x108>;
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index 9c622892c692..8fb08e6fad7a 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -39,14 +39,14 @@ gpio_keys {
#address-cells = <1>;
#size-cells = <0>;
- prog {
+ key-prog {
label = "PB_PROG";
gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
linux,code = <0x102>;
wakeup-source;
};
- reset {
+ key-reset {
label = "PB_RST";
gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 4f123477e631..f71377c9b757 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -18,7 +18,7 @@ / {
gpio-keys {
compatible = "gpio-keys";
- wakeup {
+ key-wakeup {
label = "Wakeup";
linux,code = <10>;
wakeup-source;
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index 969d990767fc..d09b3d15a828 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -201,7 +201,7 @@ gpio_keys {
#address-cells = <1>;
#size-cells = <0>;
- user_pb {
+ button-user {
label = "user_pb";
gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 7719ea3d4933..838353a42097 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -76,13 +76,13 @@ vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
status = "okay";
- sw1 {
+ button-1 {
label = "SW1";
gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
linux,code=<KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 08f0d4b995ff..96c9290007a8 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -478,13 +478,13 @@ can1: can@fc050000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- pb4 {
+ button {
label = "USER";
gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 5e8755f22784..b55e8fb113b1 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -26,14 +26,14 @@ chosen {
stdout-path = "serial0:115200n8";
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
status = "okay";
- sw4 {
+ button-1 {
label = "USER BUTTON";
gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 806eb1d911d7..38f0e1ae6ae6 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -42,14 +42,14 @@ main_xtal {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
status = "okay";
- sw4 {
+ button-1 {
label = "USER_PB1";
gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 8ed58af01391..544c64549459 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -394,13 +394,13 @@ pinctrl_usba_vbus: usba_vbus {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- bp1 {
+ button-1 {
label = "PB_USER";
gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index cdfe891f9a9e..6799c2f475b2 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -703,13 +703,13 @@ can1: can@fc050000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- bp1 {
+ button {
label = "PB_USER";
gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index a49c2966b41e..1f42a6a981bf 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -372,13 +372,13 @@ vcc_mmc0_reg: fixedregulator_mmc0 {
regulator-always-on;
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;
- bp3 {
+ button {
label = "PB_USER";
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index e519d2747936..f122f302f8e0 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -242,13 +242,13 @@ rootfs@800000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;
- pb_user1 {
+ button {
label = "pb_user1";
gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 7017f626f362..fce4e93c6bee 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -269,13 +269,13 @@ rootfs@800000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio>;
- pb_user1 {
+ button {
label = "pb_user1";
gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
linux,code = <0x100>;
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index 103544620fd7..de44da2e4aae 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -45,13 +45,13 @@ main_xtal {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- bp1 {
+ button {
label = "PB_USER";
gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
index 54d130c92185..3e46b29412d1 100644
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -12,7 +12,7 @@ / {
model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
index 89f0f717f7ed..e2195bd3e4b4 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -13,7 +13,7 @@ / {
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
index 6381088ba24f..bb72f050a4fe 100644
--- a/arch/arm/boot/dts/at91sam9260ek.dts
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -144,17 +144,17 @@ nand0: nand@40000000 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- btn3 {
+ button-3 {
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};
- btn4 {
+ button-4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 6fb4fe49cf1c..88869ca874d1 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -211,31 +211,31 @@ ds1 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- button_0 {
+ button-0 {
label = "button_0";
gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
linux,code = <256>;
wakeup-source;
};
- button_1 {
+ button-1 {
label = "button_1";
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
linux,code = <257>;
wakeup-source;
};
- button_2 {
+ button-2 {
label = "button_2";
gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
linux,code = <258>;
wakeup-source;
};
- button_3 {
+ button-3 {
label = "button_3";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <259>;
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index e732565913a4..ce8baff6a9f4 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -232,17 +232,17 @@ d2 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
linux,code = <272>;
wakeup-source;
};
- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
linux,code = <273>;
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 85c17dd1c8d5..60d61291f344 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -234,17 +234,17 @@ wm8731: wm8731@1b {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- btn3 {
+ button-3 {
label = "Button 3";
gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
linux,code = <0x103>;
wakeup-source;
};
- btn4 {
+ button-4 {
label = "Button 4";
gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
index 7da70aeeb528..92f2c05c873f 100644
--- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
@@ -23,7 +23,7 @@ aliases {
gpio-keys {
compatible = "gpio-keys";
- user_btn1 {
+ button {
label = "USER_BTN1";
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
linux,code = <KEY_PROG1>;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index e5db198a87a8..7f45e81ca165 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -343,48 +343,48 @@ led-3 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
linux,code = <272>;
wakeup-source;
};
- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
linux,code = <273>;
wakeup-source;
};
- left {
+ button-left {
label = "Joystick Left";
gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
linux,code = <105>;
};
- right {
+ button-right {
label = "Joystick Right";
gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
linux,code = <106>;
};
- up {
+ button-up {
label = "Joystick Up";
gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
linux,code = <103>;
};
- down {
+ button-down {
label = "Joystick Down";
gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
linux,code = <108>;
};
- enter {
+ button-enter {
label = "Joystick Press";
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index c905d7bfc771..4c644d4c6be7 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -226,10 +226,10 @@ d10 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- enter {
+ button-enter {
label = "Enter";
gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index ddaadfec6751..a57351270551 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -248,17 +248,17 @@ led-3 {
};
};
- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";
- right_click {
+ button-right-click {
label = "right_click";
gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
linux,code = <273>;
wakeup-source;
};
- left_click {
+ button-left-click {
label = "left_click";
gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
linux,code = <272>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 39/40] ARM: dts: at91: correct gpio-keys properties
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Nicolas Ferre, Alexandre Belloni,
Claudiu Beznea, devicetree, linux-arm-kernel, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/at91-kizbox.dts | 2 --
arch/arm/boot/dts/at91-kizbox2-common.dtsi | 2 --
arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 2 --
arch/arm/boot/dts/at91-qil_a9260.dts | 2 --
arch/arm/boot/dts/at91-wb45n.dts | 5 +----
arch/arm/boot/dts/at91-wb50n.dts | 8 ++------
6 files changed, 3 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 87e972eb2ba6..307663b4eec2 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -30,8 +30,6 @@ main_xtal {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-reset {
label = "PB_RST";
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index ed7146e23147..e5e21dff882f 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -33,8 +33,6 @@ main_xtal {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-prog {
label = "PB_PROG";
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index 8fb08e6fad7a..42640fe6b6d0 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -36,8 +36,6 @@ adc_op_clk {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
key-prog {
label = "PB_PROG";
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index d09b3d15a828..9d26f9996348 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -198,8 +198,6 @@ user_led {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-user {
label = "user_pb";
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
index 3e46b29412d1..ef73f727f7bd 100644
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -14,11 +14,8 @@ / {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- irqbtn@18 {
- reg = <18>;
+ button {
label = "IRQBTN";
linux,code = <99>;
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
index e2195bd3e4b4..ec2becf6133b 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -15,19 +15,15 @@ / {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- btn0@10 {
- reg = <10>;
+ button-0 {
label = "BTNESC";
linux,code = <1>; /* ESC button */
gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- irqbtn@31 {
- reg = <31>;
+ button-1 {
label = "IRQBTN";
linux,code = <99>; /* SysReq button */
gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 39/40] ARM: dts: at91: correct gpio-keys properties
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Nicolas Ferre, Alexandre Belloni,
Claudiu Beznea, devicetree, linux-arm-kernel, linux-kernel
Cc: Krzysztof Kozlowski
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/at91-kizbox.dts | 2 --
arch/arm/boot/dts/at91-kizbox2-common.dtsi | 2 --
arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 2 --
arch/arm/boot/dts/at91-qil_a9260.dts | 2 --
arch/arm/boot/dts/at91-wb45n.dts | 5 +----
arch/arm/boot/dts/at91-wb50n.dts | 8 ++------
6 files changed, 3 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 87e972eb2ba6..307663b4eec2 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -30,8 +30,6 @@ main_xtal {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-reset {
label = "PB_RST";
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index ed7146e23147..e5e21dff882f 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -33,8 +33,6 @@ main_xtal {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-prog {
label = "PB_PROG";
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index 8fb08e6fad7a..42640fe6b6d0 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -36,8 +36,6 @@ adc_op_clk {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
key-prog {
label = "PB_PROG";
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index d09b3d15a828..9d26f9996348 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -198,8 +198,6 @@ user_led {
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
button-user {
label = "user_pb";
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
index 3e46b29412d1..ef73f727f7bd 100644
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -14,11 +14,8 @@ / {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- irqbtn@18 {
- reg = <18>;
+ button {
label = "IRQBTN";
linux,code = <99>;
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
index e2195bd3e4b4..ec2becf6133b 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -15,19 +15,15 @@ / {
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- btn0@10 {
- reg = <10>;
+ button-0 {
label = "BTNESC";
linux,code = <1>; /* ESC button */
gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
wakeup-source;
};
- irqbtn@31 {
- reg = <31>;
+ button-1 {
label = "IRQBTN";
linux,code = <99>; /* SysReq button */
gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 40/40] ARM: dts: at91: drop unneeded status from gpio-keys
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Nicolas Ferre, Alexandre Belloni,
Claudiu Beznea, devicetree, linux-arm-kernel, linux-kernel
Cc: Krzysztof Kozlowski
Nodes do not need explicit status=okay.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/at91-sam9x60ek.dts | 1 -
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 1 -
arch/arm/boot/dts/at91-sama5d2_icp.dts | 1 -
3 files changed, 3 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 838353a42097..1432732e163b 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -80,7 +80,6 @@ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- status = "okay";
button-1 {
label = "SW1";
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index b55e8fb113b1..e1158755008b 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -31,7 +31,6 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- status = "okay";
button-1 {
label = "USER BUTTON";
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 38f0e1ae6ae6..0ba73df5cda7 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -47,7 +47,6 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- status = "okay";
button-1 {
label = "USER_PB1";
--
2.34.1
^ permalink raw reply related [flat|nested] 163+ messages in thread
* [PATCH v3 40/40] ARM: dts: at91: drop unneeded status from gpio-keys
@ 2022-06-16 0:53 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-16 0:53 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Nicolas Ferre, Alexandre Belloni,
Claudiu Beznea, devicetree, linux-arm-kernel, linux-kernel
Cc: Krzysztof Kozlowski
Nodes do not need explicit status=okay.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/at91-sam9x60ek.dts | 1 -
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 1 -
arch/arm/boot/dts/at91-sama5d2_icp.dts | 1 -
3 files changed, 3 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 838353a42097..1432732e163b 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -80,7 +80,6 @@ gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- status = "okay";
button-1 {
label = "SW1";
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index b55e8fb113b1..e1158755008b 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -31,7 +31,6 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- status = "okay";
button-1 {
label = "USER BUTTON";
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 38f0e1ae6ae6..0ba73df5cda7 100644
--- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -47,7 +47,6 @@ gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_key_gpio_default>;
- status = "okay";
button-1 {
label = "USER_PB1";
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 163+ messages in thread
* Re: [PATCH v3 38/40] ARM: dts: at91: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-16 7:41 ` Claudiu.Beznea
-1 siblings, 0 replies; 163+ messages in thread
From: Claudiu.Beznea @ 2022-06-16 7:41 UTC (permalink / raw)
To: krzysztof.kozlowski, arm, soc, arnd, olof, robh+dt,
krzysztof.kozlowski+dt, Nicolas.Ferre, alexandre.belloni, peda,
devicetree, linux-arm-kernel, linux-kernel
On 16.06.2022 03:53, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>
> ---
>
> Changes since v2:
> 1. at91-sam9x60ek.dts, at91-sama5d27_wlsom1_ek.dts,
> at91-sama5d2_icp.dts: different names according to discussion.
> ---
> arch/arm/boot/dts/at91-foxg20.dts | 4 ++--
> arch/arm/boot/dts/at91-gatwick.dts | 2 +-
> arch/arm/boot/dts/at91-kizbox.dts | 6 +++---
> arch/arm/boot/dts/at91-kizbox2-common.dtsi | 8 ++++----
> arch/arm/boot/dts/at91-kizbox3-hs.dts | 12 ++++++------
> arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 4 ++--
> arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
> arch/arm/boot/dts/at91-qil_a9260.dts | 2 +-
> arch/arm/boot/dts/at91-sam9x60ek.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d2_icp.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d3_xplained.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d4ek.dts | 4 ++--
> arch/arm/boot/dts/at91-sama7g5ek.dts | 4 ++--
> arch/arm/boot/dts/at91-wb45n.dts | 2 +-
> arch/arm/boot/dts/at91-wb50n.dts | 2 +-
> arch/arm/boot/dts/at91sam9260ek.dts | 6 +++---
> arch/arm/boot/dts/at91sam9261ek.dts | 10 +++++-----
> arch/arm/boot/dts/at91sam9263ek.dts | 6 +++---
> arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 +++---
> .../dts/at91sam9g25-gardena-smart-gateway.dts | 2 +-
> arch/arm/boot/dts/at91sam9m10g45ek.dts | 16 ++++++++--------
> arch/arm/boot/dts/at91sam9n12ek.dts | 4 ++--
> arch/arm/boot/dts/at91sam9rlek.dts | 6 +++---
> 28 files changed, 70 insertions(+), 70 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
> index 7edf057047f8..9dfd5de808d1 100644
> --- a/arch/arm/boot/dts/at91-foxg20.dts
> +++ b/arch/arm/boot/dts/at91-foxg20.dts
> @@ -155,10 +155,10 @@ user_led {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - btn {
> + button {
> label = "Button";
> gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
> linux,code = <0x103>;
> diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
> index 5a81cab5fc3a..2c718cf84d7b 100644
> --- a/arch/arm/boot/dts/at91-gatwick.dts
> +++ b/arch/arm/boot/dts/at91-gatwick.dts
> @@ -13,7 +13,7 @@ / {
> model = "Laird Workgroup Bridge 50N - Project Gatwick";
> compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> autorepeat;
>
> diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
> index 3b8812fcd854..87e972eb2ba6 100644
> --- a/arch/arm/boot/dts/at91-kizbox.dts
> +++ b/arch/arm/boot/dts/at91-kizbox.dts
> @@ -28,19 +28,19 @@ main_xtal {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> #address-cells = <1>;
> #size-cells = <0>;
>
> - reset {
> + button-reset {
> label = "PB_RST";
> gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
> linux,code = <0x100>;
> wakeup-source;
> };
>
> - user {
> + button-user {
> label = "PB_USER";
> gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
> linux,code = <0x101>;
> diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> index c08834ddf07b..ed7146e23147 100644
> --- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> @@ -31,26 +31,26 @@ main_xtal {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> #address-cells = <1>;
> #size-cells = <0>;
>
> - prog {
> + button-prog {
> label = "PB_PROG";
> gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
> linux,code = <0x102>;
> wakeup-source;
> };
>
> - reset {
> + button-reset {
> label = "PB_RST";
> gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
> linux,code = <0x100>;
> wakeup-source;
> };
>
> - user {
> + button-user {
> label = "PB_USER";
> gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
> linux,code = <0x101>;
> diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
> index 2799b2a1f4d2..f76e2e0b41ae 100644
> --- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
> +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
> @@ -55,7 +55,7 @@ led-6 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> pinctrl-names = "default" , "default", "default",
> "default", "default" ;
> @@ -68,35 +68,35 @@ &pinctrl_pio_io_reset
> &pinctrl_pio_zbe_rst>;
> pinctrl-4 = <&pinctrl_pio_input>;
>
> - SW1 {
> + switch-1 {
> label = "SW1";
> gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
> linux,code = <0x101>;
> wakeup-source;
> };
>
> - SW2 {
> + switch-2 {
> label = "SW2";
> gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
> linux,code = <0x102>;
> wakeup-source;
> };
>
> - SW3 {
> + switch-3 {
> label = "SW3";
> gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
> linux,code = <0x103>;
> wakeup-source;
> };
>
> - SW7 {
> + switch-7 {
> label = "SW7";
> gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
> linux,code = <0x107>;
> wakeup-source;
> };
>
> - SW8 {
> + switch-8 {
> label = "SW8";
> gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
> linux,code = <0x108>;
> diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> index 9c622892c692..8fb08e6fad7a 100644
> --- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> +++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> @@ -39,14 +39,14 @@ gpio_keys {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - prog {
> + key-prog {
> label = "PB_PROG";
> gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
> linux,code = <0x102>;
> wakeup-source;
> };
>
> - reset {
> + key-reset {
> label = "PB_RST";
> gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
> linux,code = <0x100>;
> diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> index 4f123477e631..f71377c9b757 100644
> --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> @@ -18,7 +18,7 @@ / {
> gpio-keys {
> compatible = "gpio-keys";
>
> - wakeup {
> + key-wakeup {
> label = "Wakeup";
> linux,code = <10>;
> wakeup-source;
> diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
> index 969d990767fc..d09b3d15a828 100644
> --- a/arch/arm/boot/dts/at91-qil_a9260.dts
> +++ b/arch/arm/boot/dts/at91-qil_a9260.dts
> @@ -201,7 +201,7 @@ gpio_keys {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - user_pb {
> + button-user {
> label = "user_pb";
> gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
> linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
> index 7719ea3d4933..838353a42097 100644
> --- a/arch/arm/boot/dts/at91-sam9x60ek.dts
> +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
> @@ -76,13 +76,13 @@ vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
> status = "okay";
>
> - sw1 {
> + button-1 {
> label = "SW1";
> gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
> linux,code=<KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> index 08f0d4b995ff..96c9290007a8 100644
> --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> @@ -478,13 +478,13 @@ can1: can@fc050000 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
>
> - pb4 {
> + button {
> label = "USER";
> gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> index 5e8755f22784..b55e8fb113b1 100644
> --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> @@ -26,14 +26,14 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
> status = "okay";
>
> - sw4 {
> + button-1 {
> label = "USER BUTTON";
> gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
> index 806eb1d911d7..38f0e1ae6ae6 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
> @@ -42,14 +42,14 @@ main_xtal {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
> status = "okay";
>
> - sw4 {
> + button-1 {
> label = "USER_PB1";
> gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> index 8ed58af01391..544c64549459 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> @@ -394,13 +394,13 @@ pinctrl_usba_vbus: usba_vbus {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
>
> - bp1 {
> + button-1 {
> label = "PB_USER";
> gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> index cdfe891f9a9e..6799c2f475b2 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> @@ -703,13 +703,13 @@ can1: can@fc050000 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
>
> - bp1 {
> + button {
> label = "PB_USER";
> gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> index a49c2966b41e..1f42a6a981bf 100644
> --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> @@ -372,13 +372,13 @@ vcc_mmc0_reg: fixedregulator_mmc0 {
> regulator-always-on;
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio>;
>
> - bp3 {
> + button {
> label = "PB_USER";
> gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> index e519d2747936..f122f302f8e0 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> @@ -242,13 +242,13 @@ rootfs@800000 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio>;
>
> - pb_user1 {
> + button {
> label = "pb_user1";
> gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
> index 7017f626f362..fce4e93c6bee 100644
> --- a/arch/arm/boot/dts/at91-sama5d4ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
> @@ -269,13 +269,13 @@ rootfs@800000 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio>;
>
> - pb_user1 {
> + button {
> label = "pb_user1";
> gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
> linux,code = <0x100>;
> diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
> index 103544620fd7..de44da2e4aae 100644
> --- a/arch/arm/boot/dts/at91-sama7g5ek.dts
> +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
> @@ -45,13 +45,13 @@ main_xtal {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
>
> - bp1 {
> + button {
> label = "PB_USER";
> gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
> index 54d130c92185..3e46b29412d1 100644
> --- a/arch/arm/boot/dts/at91-wb45n.dts
> +++ b/arch/arm/boot/dts/at91-wb45n.dts
> @@ -12,7 +12,7 @@ / {
> model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
> compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
> index 89f0f717f7ed..e2195bd3e4b4 100644
> --- a/arch/arm/boot/dts/at91-wb50n.dts
> +++ b/arch/arm/boot/dts/at91-wb50n.dts
> @@ -13,7 +13,7 @@ / {
> model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
> compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
> index 6381088ba24f..bb72f050a4fe 100644
> --- a/arch/arm/boot/dts/at91sam9260ek.dts
> +++ b/arch/arm/boot/dts/at91sam9260ek.dts
> @@ -144,17 +144,17 @@ nand0: nand@40000000 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - btn3 {
> + button-3 {
> label = "Button 3";
> gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
> linux,code = <0x103>;
> wakeup-source;
> };
>
> - btn4 {
> + button-4 {
> label = "Button 4";
> gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
> index 6fb4fe49cf1c..88869ca874d1 100644
> --- a/arch/arm/boot/dts/at91sam9261ek.dts
> +++ b/arch/arm/boot/dts/at91sam9261ek.dts
> @@ -211,31 +211,31 @@ ds1 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - button_0 {
> + button-0 {
> label = "button_0";
> gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
> linux,code = <256>;
> wakeup-source;
> };
>
> - button_1 {
> + button-1 {
> label = "button_1";
> gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
> linux,code = <257>;
> wakeup-source;
> };
>
> - button_2 {
> + button-2 {
> label = "button_2";
> gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
> linux,code = <258>;
> wakeup-source;
> };
>
> - button_3 {
> + button-3 {
> label = "button_3";
> gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
> linux,code = <259>;
> diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
> index e732565913a4..ce8baff6a9f4 100644
> --- a/arch/arm/boot/dts/at91sam9263ek.dts
> +++ b/arch/arm/boot/dts/at91sam9263ek.dts
> @@ -232,17 +232,17 @@ d2 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - left_click {
> + button-left-click {
> label = "left_click";
> gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
> linux,code = <272>;
> wakeup-source;
> };
>
> - right_click {
> + button-right-click {
> label = "right_click";
> gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
> linux,code = <273>;
> diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> index 85c17dd1c8d5..60d61291f344 100644
> --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> @@ -234,17 +234,17 @@ wm8731: wm8731@1b {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - btn3 {
> + button-3 {
> label = "Button 3";
> gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
> linux,code = <0x103>;
> wakeup-source;
> };
>
> - btn4 {
> + button-4 {
> label = "Button 4";
> gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> index 7da70aeeb528..92f2c05c873f 100644
> --- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> +++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> @@ -23,7 +23,7 @@ aliases {
> gpio-keys {
> compatible = "gpio-keys";
>
> - user_btn1 {
> + button {
> label = "USER_BTN1";
> gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> index e5db198a87a8..7f45e81ca165 100644
> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> @@ -343,48 +343,48 @@ led-3 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - left_click {
> + button-left-click {
> label = "left_click";
> gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
> linux,code = <272>;
> wakeup-source;
> };
>
> - right_click {
> + button-right-click {
> label = "right_click";
> gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
> linux,code = <273>;
> wakeup-source;
> };
>
> - left {
> + button-left {
> label = "Joystick Left";
> gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
> linux,code = <105>;
> };
>
> - right {
> + button-right {
> label = "Joystick Right";
> gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
> linux,code = <106>;
> };
>
> - up {
> + button-up {
> label = "Joystick Up";
> gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
> linux,code = <103>;
> };
>
> - down {
> + button-down {
> label = "Joystick Down";
> gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
> linux,code = <108>;
> };
>
> - enter {
> + button-enter {
> label = "Joystick Press";
> gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
> linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
> index c905d7bfc771..4c644d4c6be7 100644
> --- a/arch/arm/boot/dts/at91sam9n12ek.dts
> +++ b/arch/arm/boot/dts/at91sam9n12ek.dts
> @@ -226,10 +226,10 @@ d10 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - enter {
> + button-enter {
> label = "Enter";
> gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
> linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
> index ddaadfec6751..a57351270551 100644
> --- a/arch/arm/boot/dts/at91sam9rlek.dts
> +++ b/arch/arm/boot/dts/at91sam9rlek.dts
> @@ -248,17 +248,17 @@ led-3 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - right_click {
> + button-right-click {
> label = "right_click";
> gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
> linux,code = <273>;
> wakeup-source;
> };
>
> - left_click {
> + button-left-click {
> label = "left_click";
> gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
> linux,code = <272>;
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 38/40] ARM: dts: at91: align gpio-key node names with dtschema
@ 2022-06-16 7:41 ` Claudiu.Beznea
0 siblings, 0 replies; 163+ messages in thread
From: Claudiu.Beznea @ 2022-06-16 7:41 UTC (permalink / raw)
To: krzysztof.kozlowski, arm, soc, arnd, olof, robh+dt,
krzysztof.kozlowski+dt, Nicolas.Ferre, alexandre.belloni, peda,
devicetree, linux-arm-kernel, linux-kernel
On 16.06.2022 03:53, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>
> ---
>
> Changes since v2:
> 1. at91-sam9x60ek.dts, at91-sama5d27_wlsom1_ek.dts,
> at91-sama5d2_icp.dts: different names according to discussion.
> ---
> arch/arm/boot/dts/at91-foxg20.dts | 4 ++--
> arch/arm/boot/dts/at91-gatwick.dts | 2 +-
> arch/arm/boot/dts/at91-kizbox.dts | 6 +++---
> arch/arm/boot/dts/at91-kizbox2-common.dtsi | 8 ++++----
> arch/arm/boot/dts/at91-kizbox3-hs.dts | 12 ++++++------
> arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 4 ++--
> arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 2 +-
> arch/arm/boot/dts/at91-qil_a9260.dts | 2 +-
> arch/arm/boot/dts/at91-sam9x60ek.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d2_icp.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d3_xplained.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++--
> arch/arm/boot/dts/at91-sama5d4ek.dts | 4 ++--
> arch/arm/boot/dts/at91-sama7g5ek.dts | 4 ++--
> arch/arm/boot/dts/at91-wb45n.dts | 2 +-
> arch/arm/boot/dts/at91-wb50n.dts | 2 +-
> arch/arm/boot/dts/at91sam9260ek.dts | 6 +++---
> arch/arm/boot/dts/at91sam9261ek.dts | 10 +++++-----
> arch/arm/boot/dts/at91sam9263ek.dts | 6 +++---
> arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 6 +++---
> .../dts/at91sam9g25-gardena-smart-gateway.dts | 2 +-
> arch/arm/boot/dts/at91sam9m10g45ek.dts | 16 ++++++++--------
> arch/arm/boot/dts/at91sam9n12ek.dts | 4 ++--
> arch/arm/boot/dts/at91sam9rlek.dts | 6 +++---
> 28 files changed, 70 insertions(+), 70 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
> index 7edf057047f8..9dfd5de808d1 100644
> --- a/arch/arm/boot/dts/at91-foxg20.dts
> +++ b/arch/arm/boot/dts/at91-foxg20.dts
> @@ -155,10 +155,10 @@ user_led {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - btn {
> + button {
> label = "Button";
> gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
> linux,code = <0x103>;
> diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
> index 5a81cab5fc3a..2c718cf84d7b 100644
> --- a/arch/arm/boot/dts/at91-gatwick.dts
> +++ b/arch/arm/boot/dts/at91-gatwick.dts
> @@ -13,7 +13,7 @@ / {
> model = "Laird Workgroup Bridge 50N - Project Gatwick";
> compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> autorepeat;
>
> diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
> index 3b8812fcd854..87e972eb2ba6 100644
> --- a/arch/arm/boot/dts/at91-kizbox.dts
> +++ b/arch/arm/boot/dts/at91-kizbox.dts
> @@ -28,19 +28,19 @@ main_xtal {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> #address-cells = <1>;
> #size-cells = <0>;
>
> - reset {
> + button-reset {
> label = "PB_RST";
> gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
> linux,code = <0x100>;
> wakeup-source;
> };
>
> - user {
> + button-user {
> label = "PB_USER";
> gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
> linux,code = <0x101>;
> diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> index c08834ddf07b..ed7146e23147 100644
> --- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> @@ -31,26 +31,26 @@ main_xtal {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> #address-cells = <1>;
> #size-cells = <0>;
>
> - prog {
> + button-prog {
> label = "PB_PROG";
> gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
> linux,code = <0x102>;
> wakeup-source;
> };
>
> - reset {
> + button-reset {
> label = "PB_RST";
> gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
> linux,code = <0x100>;
> wakeup-source;
> };
>
> - user {
> + button-user {
> label = "PB_USER";
> gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
> linux,code = <0x101>;
> diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
> index 2799b2a1f4d2..f76e2e0b41ae 100644
> --- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
> +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
> @@ -55,7 +55,7 @@ led-6 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> pinctrl-names = "default" , "default", "default",
> "default", "default" ;
> @@ -68,35 +68,35 @@ &pinctrl_pio_io_reset
> &pinctrl_pio_zbe_rst>;
> pinctrl-4 = <&pinctrl_pio_input>;
>
> - SW1 {
> + switch-1 {
> label = "SW1";
> gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
> linux,code = <0x101>;
> wakeup-source;
> };
>
> - SW2 {
> + switch-2 {
> label = "SW2";
> gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
> linux,code = <0x102>;
> wakeup-source;
> };
>
> - SW3 {
> + switch-3 {
> label = "SW3";
> gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
> linux,code = <0x103>;
> wakeup-source;
> };
>
> - SW7 {
> + switch-7 {
> label = "SW7";
> gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
> linux,code = <0x107>;
> wakeup-source;
> };
>
> - SW8 {
> + switch-8 {
> label = "SW8";
> gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
> linux,code = <0x108>;
> diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> index 9c622892c692..8fb08e6fad7a 100644
> --- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> +++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> @@ -39,14 +39,14 @@ gpio_keys {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - prog {
> + key-prog {
> label = "PB_PROG";
> gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
> linux,code = <0x102>;
> wakeup-source;
> };
>
> - reset {
> + key-reset {
> label = "PB_RST";
> gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
> linux,code = <0x100>;
> diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> index 4f123477e631..f71377c9b757 100644
> --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> @@ -18,7 +18,7 @@ / {
> gpio-keys {
> compatible = "gpio-keys";
>
> - wakeup {
> + key-wakeup {
> label = "Wakeup";
> linux,code = <10>;
> wakeup-source;
> diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
> index 969d990767fc..d09b3d15a828 100644
> --- a/arch/arm/boot/dts/at91-qil_a9260.dts
> +++ b/arch/arm/boot/dts/at91-qil_a9260.dts
> @@ -201,7 +201,7 @@ gpio_keys {
> #address-cells = <1>;
> #size-cells = <0>;
>
> - user_pb {
> + button-user {
> label = "user_pb";
> gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
> linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
> index 7719ea3d4933..838353a42097 100644
> --- a/arch/arm/boot/dts/at91-sam9x60ek.dts
> +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
> @@ -76,13 +76,13 @@ vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
> status = "okay";
>
> - sw1 {
> + button-1 {
> label = "SW1";
> gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
> linux,code=<KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> index 08f0d4b995ff..96c9290007a8 100644
> --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> @@ -478,13 +478,13 @@ can1: can@fc050000 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
>
> - pb4 {
> + button {
> label = "USER";
> gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> index 5e8755f22784..b55e8fb113b1 100644
> --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> @@ -26,14 +26,14 @@ chosen {
> stdout-path = "serial0:115200n8";
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
> status = "okay";
>
> - sw4 {
> + button-1 {
> label = "USER BUTTON";
> gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
> index 806eb1d911d7..38f0e1ae6ae6 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
> @@ -42,14 +42,14 @@ main_xtal {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
> status = "okay";
>
> - sw4 {
> + button-1 {
> label = "USER_PB1";
> gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> index 8ed58af01391..544c64549459 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> @@ -394,13 +394,13 @@ pinctrl_usba_vbus: usba_vbus {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
>
> - bp1 {
> + button-1 {
> label = "PB_USER";
> gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> index cdfe891f9a9e..6799c2f475b2 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> @@ -703,13 +703,13 @@ can1: can@fc050000 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
>
> - bp1 {
> + button {
> label = "PB_USER";
> gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> index a49c2966b41e..1f42a6a981bf 100644
> --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> @@ -372,13 +372,13 @@ vcc_mmc0_reg: fixedregulator_mmc0 {
> regulator-always-on;
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio>;
>
> - bp3 {
> + button {
> label = "PB_USER";
> gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> index e519d2747936..f122f302f8e0 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> @@ -242,13 +242,13 @@ rootfs@800000 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio>;
>
> - pb_user1 {
> + button {
> label = "pb_user1";
> gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
> index 7017f626f362..fce4e93c6bee 100644
> --- a/arch/arm/boot/dts/at91-sama5d4ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
> @@ -269,13 +269,13 @@ rootfs@800000 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio>;
>
> - pb_user1 {
> + button {
> label = "pb_user1";
> gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
> linux,code = <0x100>;
> diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
> index 103544620fd7..de44da2e4aae 100644
> --- a/arch/arm/boot/dts/at91-sama7g5ek.dts
> +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
> @@ -45,13 +45,13 @@ main_xtal {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_key_gpio_default>;
>
> - bp1 {
> + button {
> label = "PB_USER";
> gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
> index 54d130c92185..3e46b29412d1 100644
> --- a/arch/arm/boot/dts/at91-wb45n.dts
> +++ b/arch/arm/boot/dts/at91-wb45n.dts
> @@ -12,7 +12,7 @@ / {
> model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
> compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
> index 89f0f717f7ed..e2195bd3e4b4 100644
> --- a/arch/arm/boot/dts/at91-wb50n.dts
> +++ b/arch/arm/boot/dts/at91-wb50n.dts
> @@ -13,7 +13,7 @@ / {
> model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
> compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
> index 6381088ba24f..bb72f050a4fe 100644
> --- a/arch/arm/boot/dts/at91sam9260ek.dts
> +++ b/arch/arm/boot/dts/at91sam9260ek.dts
> @@ -144,17 +144,17 @@ nand0: nand@40000000 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - btn3 {
> + button-3 {
> label = "Button 3";
> gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
> linux,code = <0x103>;
> wakeup-source;
> };
>
> - btn4 {
> + button-4 {
> label = "Button 4";
> gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
> index 6fb4fe49cf1c..88869ca874d1 100644
> --- a/arch/arm/boot/dts/at91sam9261ek.dts
> +++ b/arch/arm/boot/dts/at91sam9261ek.dts
> @@ -211,31 +211,31 @@ ds1 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - button_0 {
> + button-0 {
> label = "button_0";
> gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
> linux,code = <256>;
> wakeup-source;
> };
>
> - button_1 {
> + button-1 {
> label = "button_1";
> gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
> linux,code = <257>;
> wakeup-source;
> };
>
> - button_2 {
> + button-2 {
> label = "button_2";
> gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
> linux,code = <258>;
> wakeup-source;
> };
>
> - button_3 {
> + button-3 {
> label = "button_3";
> gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
> linux,code = <259>;
> diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
> index e732565913a4..ce8baff6a9f4 100644
> --- a/arch/arm/boot/dts/at91sam9263ek.dts
> +++ b/arch/arm/boot/dts/at91sam9263ek.dts
> @@ -232,17 +232,17 @@ d2 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - left_click {
> + button-left-click {
> label = "left_click";
> gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
> linux,code = <272>;
> wakeup-source;
> };
>
> - right_click {
> + button-right-click {
> label = "right_click";
> gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
> linux,code = <273>;
> diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> index 85c17dd1c8d5..60d61291f344 100644
> --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> @@ -234,17 +234,17 @@ wm8731: wm8731@1b {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - btn3 {
> + button-3 {
> label = "Button 3";
> gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
> linux,code = <0x103>;
> wakeup-source;
> };
>
> - btn4 {
> + button-4 {
> label = "Button 4";
> gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> index 7da70aeeb528..92f2c05c873f 100644
> --- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> +++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> @@ -23,7 +23,7 @@ aliases {
> gpio-keys {
> compatible = "gpio-keys";
>
> - user_btn1 {
> + button {
> label = "USER_BTN1";
> gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> index e5db198a87a8..7f45e81ca165 100644
> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> @@ -343,48 +343,48 @@ led-3 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - left_click {
> + button-left-click {
> label = "left_click";
> gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
> linux,code = <272>;
> wakeup-source;
> };
>
> - right_click {
> + button-right-click {
> label = "right_click";
> gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
> linux,code = <273>;
> wakeup-source;
> };
>
> - left {
> + button-left {
> label = "Joystick Left";
> gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
> linux,code = <105>;
> };
>
> - right {
> + button-right {
> label = "Joystick Right";
> gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
> linux,code = <106>;
> };
>
> - up {
> + button-up {
> label = "Joystick Up";
> gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
> linux,code = <103>;
> };
>
> - down {
> + button-down {
> label = "Joystick Down";
> gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
> linux,code = <108>;
> };
>
> - enter {
> + button-enter {
> label = "Joystick Press";
> gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
> linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
> index c905d7bfc771..4c644d4c6be7 100644
> --- a/arch/arm/boot/dts/at91sam9n12ek.dts
> +++ b/arch/arm/boot/dts/at91sam9n12ek.dts
> @@ -226,10 +226,10 @@ d10 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - enter {
> + button-enter {
> label = "Enter";
> gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
> linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
> index ddaadfec6751..a57351270551 100644
> --- a/arch/arm/boot/dts/at91sam9rlek.dts
> +++ b/arch/arm/boot/dts/at91sam9rlek.dts
> @@ -248,17 +248,17 @@ led-3 {
> };
> };
>
> - gpio_keys {
> + gpio-keys {
> compatible = "gpio-keys";
>
> - right_click {
> + button-right-click {
> label = "right_click";
> gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
> linux,code = <273>;
> wakeup-source;
> };
>
> - left_click {
> + button-left-click {
> label = "left_click";
> gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
> linux,code = <272>;
> --
> 2.34.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 17/40] arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-17 10:41 ` Matthias Brugger
-1 siblings, 0 replies; 163+ messages in thread
From: Matthias Brugger @ 2022-06-17 10:41 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
Is it me or doesn't the commit message match the actual commit? Change looks
good, but message puzzles me.
Regards,
Matthias
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> index c28da9323a9c..1a86857c9027 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> @@ -40,7 +40,6 @@ cpu@1 {
>
> gpio-keys {
> compatible = "gpio-keys";
> - poll-interval = <100>;
>
> key-factory {
> label = "factory";
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 17/40] arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties
@ 2022-06-17 10:41 ` Matthias Brugger
0 siblings, 0 replies; 163+ messages in thread
From: Matthias Brugger @ 2022-06-17 10:41 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
Is it me or doesn't the commit message match the actual commit? Change looks
good, but message puzzles me.
Regards,
Matthias
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> index c28da9323a9c..1a86857c9027 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> @@ -40,7 +40,6 @@ cpu@1 {
>
> gpio-keys {
> compatible = "gpio-keys";
> - poll-interval = <100>;
>
> key-factory {
> label = "factory";
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 15/40] arm64: dts: mediatek: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-17 10:43 ` Matthias Brugger
-1 siblings, 0 replies; 163+ messages in thread
From: Matthias Brugger @ 2022-06-17 10:43 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied, thanks
> ---
> .../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++--
> arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 4 ++--
> arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts | 6 +++---
> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 10 +++++-----
> arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 4 ++--
> arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi | 2 +-
> arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 2 +-
> arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 4 ++--
> 8 files changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> index 2b9bf8dd14ec..c2311733d2de 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> @@ -40,13 +40,13 @@ cpu@1 {
> gpio-keys {
> compatible = "gpio-keys";
>
> - factory {
> + factory-key {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
> };
>
> - wps {
> + wps-key {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> index 596c073d8b05..c28da9323a9c 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> @@ -42,13 +42,13 @@ gpio-keys {
> compatible = "gpio-keys";
> poll-interval = <100>;
>
> - factory {
> + key-factory {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 0 0>;
> };
>
> - wps {
> + key-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 102 0>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
> index 44f6149c1307..28433b94f7c7 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
> @@ -21,7 +21,7 @@ cpu_crit: cpu_crit0 {
> };
>
> &gpio_keys {
> - /delete-node/tablet_mode;
> - /delete-node/volume_down;
> - /delete-node/volume_up;
> + /delete-node/switch-tablet-mode;
> + /delete-node/switch-volume-down;
> + /delete-node/switch-volume-up;
> };
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> index 9c75fbb31f98..d20378758213 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> @@ -53,7 +53,7 @@ gpio_keys: gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_pins>;
>
> - lid {
> + switch-lid {
> label = "Lid";
> gpios = <&pio 69 GPIO_ACTIVE_LOW>;
> linux,code = <SW_LID>;
> @@ -61,7 +61,7 @@ lid {
> gpio-key,wakeup;
> };
>
> - power {
> + switch-power {
> label = "Power";
> gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
> linux,code = <KEY_POWER>;
> @@ -69,7 +69,7 @@ power {
> gpio-key,wakeup;
> };
>
> - tablet_mode {
> + switch-tablet-mode {
> label = "Tablet_mode";
> gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
> linux,code = <SW_TABLET_MODE>;
> @@ -77,13 +77,13 @@ tablet_mode {
> gpio-key,wakeup;
> };
>
> - volume_down {
> + switch-volume-down {
> label = "Volume_down";
> gpios = <&pio 123 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_VOLUMEDOWN>;
> };
>
> - volume_up {
> + switch-volume-up {
> label = "Volume_up";
> gpios = <&pio 124 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_VOLUMEUP>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> index 2d7a193272ae..3ac83be53627 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> @@ -73,7 +73,7 @@ volume_buttons: volume-buttons {
> pinctrl-names = "default";
> pinctrl-0 = <&volume_button_pins>;
>
> - volume_down {
> + button-volume-down {
> label = "Volume Down";
> linux,code = <KEY_VOLUMEDOWN>;
> debounce-interval = <100>;
> @@ -81,7 +81,7 @@ volume_down {
> gpios = <&pio 6 GPIO_ACTIVE_LOW>;
> };
>
> - volume_up {
> + button-volume-up {
> label = "Volume Up";
> linux,code = <KEY_VOLUMEUP>;
> debounce-interval = <100>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
> index 28966a65391b..50a0dd36b5fb 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
> @@ -45,7 +45,7 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&pen_eject>;
>
> - pen-insert {
> + switch-pen-insert {
> label = "Pen Insert";
> /* Insert = low, eject = high */
> gpios = <&pio 6 GPIO_ACTIVE_LOW>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index b035e06840e6..b50261e8b9ed 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -144,7 +144,7 @@ wifi_wakeup: wifi-wakeup {
> pinctrl-names = "default";
> pinctrl-0 = <&wifi_pins_wakeup>;
>
> - wowlan {
> + button-wowlan {
> label = "Wake on WiFi";
> gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
> linux,code = <KEY_WAKEUP>;
> diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> index 7a717f926929..8ee1529683a3 100644
> --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> @@ -28,7 +28,7 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
>
> - volume-up {
> + key-volume-up {
> gpios = <&pio 42 GPIO_ACTIVE_LOW>;
> label = "volume_up";
> linux,code = <115>;
> @@ -36,7 +36,7 @@ volume-up {
> debounce-interval = <15>;
> };
>
> - volume-down {
> + key-volume-down {
> gpios = <&pio 43 GPIO_ACTIVE_LOW>;
> label = "volume_down";
> linux,code = <114>;
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 15/40] arm64: dts: mediatek: align gpio-key node names with dtschema
@ 2022-06-17 10:43 ` Matthias Brugger
0 siblings, 0 replies; 163+ messages in thread
From: Matthias Brugger @ 2022-06-17 10:43 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied, thanks
> ---
> .../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++--
> arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 4 ++--
> arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts | 6 +++---
> arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 10 +++++-----
> arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 4 ++--
> arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi | 2 +-
> arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 2 +-
> arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi | 4 ++--
> 8 files changed, 18 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> index 2b9bf8dd14ec..c2311733d2de 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> @@ -40,13 +40,13 @@ cpu@1 {
> gpio-keys {
> compatible = "gpio-keys";
>
> - factory {
> + factory-key {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
> };
>
> - wps {
> + wps-key {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> index 596c073d8b05..c28da9323a9c 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
> @@ -42,13 +42,13 @@ gpio-keys {
> compatible = "gpio-keys";
> poll-interval = <100>;
>
> - factory {
> + key-factory {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 0 0>;
> };
>
> - wps {
> + key-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 102 0>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
> index 44f6149c1307..28433b94f7c7 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
> @@ -21,7 +21,7 @@ cpu_crit: cpu_crit0 {
> };
>
> &gpio_keys {
> - /delete-node/tablet_mode;
> - /delete-node/volume_down;
> - /delete-node/volume_up;
> + /delete-node/switch-tablet-mode;
> + /delete-node/switch-volume-down;
> + /delete-node/switch-volume-up;
> };
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> index 9c75fbb31f98..d20378758213 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi
> @@ -53,7 +53,7 @@ gpio_keys: gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_pins>;
>
> - lid {
> + switch-lid {
> label = "Lid";
> gpios = <&pio 69 GPIO_ACTIVE_LOW>;
> linux,code = <SW_LID>;
> @@ -61,7 +61,7 @@ lid {
> gpio-key,wakeup;
> };
>
> - power {
> + switch-power {
> label = "Power";
> gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
> linux,code = <KEY_POWER>;
> @@ -69,7 +69,7 @@ power {
> gpio-key,wakeup;
> };
>
> - tablet_mode {
> + switch-tablet-mode {
> label = "Tablet_mode";
> gpios = <&pio 121 GPIO_ACTIVE_HIGH>;
> linux,code = <SW_TABLET_MODE>;
> @@ -77,13 +77,13 @@ tablet_mode {
> gpio-key,wakeup;
> };
>
> - volume_down {
> + switch-volume-down {
> label = "Volume_down";
> gpios = <&pio 123 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_VOLUMEDOWN>;
> };
>
> - volume_up {
> + switch-volume-up {
> label = "Volume_up";
> gpios = <&pio 124 GPIO_ACTIVE_LOW>;
> linux,code = <KEY_VOLUMEUP>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> index 2d7a193272ae..3ac83be53627 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> @@ -73,7 +73,7 @@ volume_buttons: volume-buttons {
> pinctrl-names = "default";
> pinctrl-0 = <&volume_button_pins>;
>
> - volume_down {
> + button-volume-down {
> label = "Volume Down";
> linux,code = <KEY_VOLUMEDOWN>;
> debounce-interval = <100>;
> @@ -81,7 +81,7 @@ volume_down {
> gpios = <&pio 6 GPIO_ACTIVE_LOW>;
> };
>
> - volume_up {
> + button-volume-up {
> label = "Volume Up";
> linux,code = <KEY_VOLUMEUP>;
> debounce-interval = <100>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
> index 28966a65391b..50a0dd36b5fb 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
> @@ -45,7 +45,7 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&pen_eject>;
>
> - pen-insert {
> + switch-pen-insert {
> label = "Pen Insert";
> /* Insert = low, eject = high */
> gpios = <&pio 6 GPIO_ACTIVE_LOW>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> index b035e06840e6..b50261e8b9ed 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> @@ -144,7 +144,7 @@ wifi_wakeup: wifi-wakeup {
> pinctrl-names = "default";
> pinctrl-0 = <&wifi_pins_wakeup>;
>
> - wowlan {
> + button-wowlan {
> label = "Wake on WiFi";
> gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
> linux,code = <KEY_WAKEUP>;
> diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> index 7a717f926929..8ee1529683a3 100644
> --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> @@ -28,7 +28,7 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&gpio_keys_default>;
>
> - volume-up {
> + key-volume-up {
> gpios = <&pio 42 GPIO_ACTIVE_LOW>;
> label = "volume_up";
> linux,code = <115>;
> @@ -36,7 +36,7 @@ volume-up {
> debounce-interval = <15>;
> };
>
> - volume-down {
> + key-volume-down {
> gpios = <&pio 43 GPIO_ACTIVE_LOW>;
> label = "volume_down";
> linux,code = <114>;
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 16/40] arm64: dts: mediatek: mt7622-bananapi-bpi-r64: align led node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-17 10:43 ` Matthias Brugger
-1 siblings, 0 replies; 163+ messages in thread
From: Matthias Brugger @ 2022-06-17 10:43 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> with 'led'. Use generic color properties instead of the node name.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied, thanks!
> ---
> arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> index c2311733d2de..7d1ecf72a6c3 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> @@ -8,6 +8,7 @@
> /dts-v1/;
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
>
> #include "mt7622.dtsi"
> #include "mt6380.dtsi"
> @@ -56,14 +57,16 @@ wps-key {
> leds {
> compatible = "gpio-leds";
>
> - green {
> + led-0 {
> label = "bpi-r64:pio:green";
> + color = <LED_COLOR_ID_GREEN>;
> gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - red {
> + led-1 {
> label = "bpi-r64:pio:red";
> + color = <LED_COLOR_ID_RED>;
> gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 16/40] arm64: dts: mediatek: mt7622-bananapi-bpi-r64: align led node names with dtschema
@ 2022-06-17 10:43 ` Matthias Brugger
0 siblings, 0 replies; 163+ messages in thread
From: Matthias Brugger @ 2022-06-17 10:43 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> with 'led'. Use generic color properties instead of the node name.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied, thanks!
> ---
> arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> index c2311733d2de..7d1ecf72a6c3 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> @@ -8,6 +8,7 @@
> /dts-v1/;
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
>
> #include "mt7622.dtsi"
> #include "mt6380.dtsi"
> @@ -56,14 +57,16 @@ wps-key {
> leds {
> compatible = "gpio-leds";
>
> - green {
> + led-0 {
> label = "bpi-r64:pio:green";
> + color = <LED_COLOR_ID_GREEN>;
> gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
>
> - red {
> + led-1 {
> label = "bpi-r64:pio:red";
> + color = <LED_COLOR_ID_RED>;
> gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 18/40] ARM: dts: mediatek: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-17 10:44 ` Matthias Brugger
-1 siblings, 0 replies; 163+ messages in thread
From: Matthias Brugger @ 2022-06-17 10:44 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied, thanks!
> ---
> arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 4 ++--
> arch/arm/boot/dts/mt7623a-rfb-nand.dts | 4 ++--
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 4 ++--
> arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 4 ++--
> arch/arm/boot/dts/mt7629-rfb.dts | 4 ++--
> 5 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
> index 13c86936d1c8..e8b4b6d30d19 100644
> --- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
> +++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
> @@ -45,13 +45,13 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&key_pins_a>;
>
> - factory {
> + button-factory {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 256 GPIO_ACTIVE_LOW>;
> };
>
> - wps {
> + button-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
> index 88d8f0b2f4c2..61f5da68d4b0 100644
> --- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts
> +++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
> @@ -45,13 +45,13 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&key_pins_a>;
>
> - factory {
> + button-factory {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 256 GPIO_ACTIVE_LOW>;
> };
>
> - wps {
> + button-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 027c1b0c6a98..5008115d2494 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -91,13 +91,13 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&key_pins_a>;
>
> - factory {
> + button-factory {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 256 GPIO_ACTIVE_LOW>;
> };
>
> - wps {
> + button-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
> index 1b9b9a8145a7..bf67a8e9be59 100644
> --- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
> +++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
> @@ -60,13 +60,13 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&key_pins_a>;
>
> - factory {
> + button-factory {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 256 GPIO_ACTIVE_LOW>;
> };
>
> - wps {
> + button-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
> index eb536cbebd9b..84e14bee7235 100644
> --- a/arch/arm/boot/dts/mt7629-rfb.dts
> +++ b/arch/arm/boot/dts/mt7629-rfb.dts
> @@ -23,13 +23,13 @@ chosen {
> gpio-keys {
> compatible = "gpio-keys";
>
> - reset {
> + button-reset {
> label = "factory";
> linux,code = <KEY_RESTART>;
> gpios = <&pio 60 GPIO_ACTIVE_LOW>;
> };
>
> - wps {
> + button-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 58 GPIO_ACTIVE_LOW>;
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 18/40] ARM: dts: mediatek: align gpio-key node names with dtschema
@ 2022-06-17 10:44 ` Matthias Brugger
0 siblings, 0 replies; 163+ messages in thread
From: Matthias Brugger @ 2022-06-17 10:44 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Applied, thanks!
> ---
> arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 4 ++--
> arch/arm/boot/dts/mt7623a-rfb-nand.dts | 4 ++--
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 4 ++--
> arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 4 ++--
> arch/arm/boot/dts/mt7629-rfb.dts | 4 ++--
> 5 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
> index 13c86936d1c8..e8b4b6d30d19 100644
> --- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
> +++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
> @@ -45,13 +45,13 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&key_pins_a>;
>
> - factory {
> + button-factory {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 256 GPIO_ACTIVE_LOW>;
> };
>
> - wps {
> + button-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
> index 88d8f0b2f4c2..61f5da68d4b0 100644
> --- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts
> +++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
> @@ -45,13 +45,13 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&key_pins_a>;
>
> - factory {
> + button-factory {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 256 GPIO_ACTIVE_LOW>;
> };
>
> - wps {
> + button-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 027c1b0c6a98..5008115d2494 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -91,13 +91,13 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&key_pins_a>;
>
> - factory {
> + button-factory {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 256 GPIO_ACTIVE_LOW>;
> };
>
> - wps {
> + button-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
> index 1b9b9a8145a7..bf67a8e9be59 100644
> --- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
> +++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
> @@ -60,13 +60,13 @@ gpio-keys {
> pinctrl-names = "default";
> pinctrl-0 = <&key_pins_a>;
>
> - factory {
> + button-factory {
> label = "factory";
> linux,code = <BTN_0>;
> gpios = <&pio 256 GPIO_ACTIVE_LOW>;
> };
>
> - wps {
> + button-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
> index eb536cbebd9b..84e14bee7235 100644
> --- a/arch/arm/boot/dts/mt7629-rfb.dts
> +++ b/arch/arm/boot/dts/mt7629-rfb.dts
> @@ -23,13 +23,13 @@ chosen {
> gpio-keys {
> compatible = "gpio-keys";
>
> - reset {
> + button-reset {
> label = "factory";
> linux,code = <KEY_RESTART>;
> gpios = <&pio 60 GPIO_ACTIVE_LOW>;
> };
>
> - wps {
> + button-wps {
> label = "wps";
> linux,code = <KEY_WPS_BUTTON>;
> gpios = <&pio 58 GPIO_ACTIVE_LOW>;
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 17/40] arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties
2022-06-17 10:41 ` Matthias Brugger
@ 2022-06-17 23:18 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-17 23:18 UTC (permalink / raw)
To: Matthias Brugger, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel
On 17/06/2022 03:41, Matthias Brugger wrote:
> On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
>> gpio-keys children do not use unit addresses.
>>
>
> Is it me or doesn't the commit message match the actual commit? Change looks
> good, but message puzzles me.
>
Indeed, wrong commit msg. Thanks for spotting it, I will send a v4 of
this patch alone.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 17/40] arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties
@ 2022-06-17 23:18 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-17 23:18 UTC (permalink / raw)
To: Matthias Brugger, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-mediatek, linux-kernel
On 17/06/2022 03:41, Matthias Brugger wrote:
> On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
>> gpio-keys children do not use unit addresses.
>>
>
> Is it me or doesn't the commit message match the actual commit? Change looks
> good, but message puzzles me.
>
Indeed, wrong commit msg. Thanks for spotting it, I will send a v4 of
this patch alone.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
2022-06-16 0:52 ` Krzysztof Kozlowski
(?)
@ 2022-06-18 3:02 ` Nishanth Menon
-1 siblings, 0 replies; 163+ messages in thread
From: Nishanth Menon @ 2022-06-18 3:02 UTC (permalink / raw)
To: krzysztof.kozlowski, olof, soc, Arnd Bergmann, arm
Cc: Nishanth Menon, linux-input, khuong, heiko, linux-kernel,
devicetree, jonathanh, sebastian.hesselbarth, agross, linux-omap,
linux-gpio, tony, nicolas.ferre, joel, linux-arm-msm, robh+dt,
bcousson, thierry.reding, claudiu.beznea, vigneshr,
bjorn.andersson, openbmc, peda, andrew, linux-aspeed,
linus.walleij, festevam, xuwei5, alexandre.belloni, leoyang.li,
michal.simek, andrew, kristo, linux-imx, krzysztof.kozlowski+dt,
shawnguo, Sascha Hauer, linux-arm-kernel, matthias.bgg,
j.neuschaefer, gregory.clement, linux-mediatek, linux-rockchip,
linux, kernel, dmitry.torokhov, linux-tegra
Hi Krzysztof Kozlowski,
On Wed, 15 Jun 2022 17:52:24 -0700, Krzysztof Kozlowski wrote:
> Merging
> =======
> 1. dt-bindings: rebased on top of Rob's:
> https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
>
> 2. DTS patches are independent. They can be picked up directly by sub-arch
> maintainers, by Arnd or Olof, or eventually by me (if you wish).
>
> [...]
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[29/40] arm64: dts: ti: align gpio-key node names with dtschema
commit: 85423386c9763fb20159892631eccc481a2d9b71
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
@ 2022-06-18 3:02 ` Nishanth Menon
0 siblings, 0 replies; 163+ messages in thread
From: Nishanth Menon @ 2022-06-18 3:02 UTC (permalink / raw)
To: krzysztof.kozlowski, olof, soc, Arnd Bergmann, arm
Cc: Nishanth Menon, linux-input, khuong, heiko, linux-kernel,
devicetree, jonathanh, sebastian.hesselbarth, agross, linux-omap,
linux-gpio, tony, nicolas.ferre, joel, linux-arm-msm, robh+dt,
bcousson, thierry.reding, claudiu.beznea, vigneshr,
bjorn.andersson, openbmc, peda, andrew, linux-aspeed,
linus.walleij, festevam, xuwei5, alexandre.belloni, leoyang.li,
michal.simek, andrew, kristo, linux-imx, krzysztof.kozlowski+dt,
shawnguo, Sascha Hauer, linux-arm-kernel, matthias.bgg,
j.neuschaefer, gregory.clement, linux-mediatek, linux-rockchip,
linux, kernel, dmitry.torokhov, linux-tegra
Hi Krzysztof Kozlowski,
On Wed, 15 Jun 2022 17:52:24 -0700, Krzysztof Kozlowski wrote:
> Merging
> =======
> 1. dt-bindings: rebased on top of Rob's:
> https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
>
> 2. DTS patches are independent. They can be picked up directly by sub-arch
> maintainers, by Arnd or Olof, or eventually by me (if you wish).
>
> [...]
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[29/40] arm64: dts: ti: align gpio-key node names with dtschema
commit: 85423386c9763fb20159892631eccc481a2d9b71
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
@ 2022-06-18 3:02 ` Nishanth Menon
0 siblings, 0 replies; 163+ messages in thread
From: Nishanth Menon @ 2022-06-18 3:02 UTC (permalink / raw)
To: krzysztof.kozlowski, olof, soc, Arnd Bergmann, arm
Cc: Nishanth Menon, andrew, alexandre.belloni, heiko, linux-aspeed,
tony, linus.walleij, bjorn.andersson, linux-tegra,
thierry.reding, krzysztof.kozlowski+dt, linux, leoyang.li,
festevam, vigneshr, khuong, peda, openbmc, michal.simek, xuwei5,
jonathanh, linux-rockchip, agross, joel, linux-input,
sebastian.hesselbarth, devicetree, kernel, gregory.clement,
linux-arm-msm, Sascha Hauer, j.neuschaefer, linux-gpio, robh+dt,
linux-mediatek, matthias.bgg, linux-imx, linux-omap,
linux-arm-kernel
Hi Krzysztof Kozlowski,
On Wed, 15 Jun 2022 17:52:24 -0700, Krzysztof Kozlowski wrote:
> Merging
> =======
> 1. dt-bindings: rebased on top of Rob's:
> https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
>
> 2. DTS patches are independent. They can be picked up directly by sub-arch
> maintainers, by Arnd or Olof, or eventually by me (if you wish).
>
> [...]
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[29/40] arm64: dts: ti: align gpio-key node names with dtschema
commit: 85423386c9763fb20159892631eccc481a2d9b71
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 05/40] arm64: dts: apm: correct gpio-keys properties
2022-06-16 0:52 ` [PATCH v3 05/40] arm64: dts: apm: correct gpio-keys properties Krzysztof Kozlowski
@ 2022-06-20 11:14 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-20 11:14 UTC (permalink / raw)
To: arm, Arnd Bergmann, devicetree, Krzysztof Kozlowski, Khuong Dinh,
Krzysztof Kozlowski, Olof Johansson, Rob Herring, linux-kernel,
soc
On Wed, 15 Jun 2022 17:52:58 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[05/40] arm64: dts: apm: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/2453119fe6eed92ae88baac14ed28425a2b9f95e
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 06/40] arm64: dts: broadcom: align gpio-key node names with dtschema
2022-06-16 0:52 ` [PATCH v3 06/40] arm64: dts: broadcom: align gpio-key node names with dtschema Krzysztof Kozlowski
@ 2022-06-20 11:14 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-20 11:14 UTC (permalink / raw)
To: Arnd Bergmann, arm, devicetree, Krzysztof Kozlowski,
Krzysztof Kozlowski, Olof Johansson, Rob Herring, linux-kernel,
soc
On Wed, 15 Jun 2022 17:52:59 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[06/40] arm64: dts: broadcom: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/ea559c81b61603d4044df6f826f10a832c42c98c
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 09/40] arm64: dts: hisilicon: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-20 11:14 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-20 11:14 UTC (permalink / raw)
To: arm, Arnd Bergmann, devicetree, Krzysztof Kozlowski,
linux-arm-kernel, Krzysztof Kozlowski, linux-kernel,
Olof Johansson, Rob Herring, Wei Xu, soc
On Wed, 15 Jun 2022 17:53:02 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[09/40] arm64: dts: hisilicon: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/111b4da2c2fc2551ecfe466616089e1223dc7ac1
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 09/40] arm64: dts: hisilicon: align gpio-key node names with dtschema
@ 2022-06-20 11:14 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-20 11:14 UTC (permalink / raw)
To: arm, Arnd Bergmann, devicetree, Krzysztof Kozlowski,
linux-arm-kernel, Krzysztof Kozlowski, linux-kernel,
Olof Johansson, Rob Herring, Wei Xu, soc
On Wed, 15 Jun 2022 17:53:02 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[09/40] arm64: dts: hisilicon: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/111b4da2c2fc2551ecfe466616089e1223dc7ac1
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 10/40] arm64: dts: hisilicon: correct gpio-keys properties
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-20 11:14 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-20 11:14 UTC (permalink / raw)
To: Arnd Bergmann, arm, devicetree, Krzysztof Kozlowski,
linux-arm-kernel, Krzysztof Kozlowski, Olof Johansson,
Rob Herring, Wei Xu, linux-kernel, soc
On Wed, 15 Jun 2022 17:53:03 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[10/40] arm64: dts: hisilicon: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/717b3096da2ea205c6f31b4c2cd4485671d6ac79
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 10/40] arm64: dts: hisilicon: correct gpio-keys properties
@ 2022-06-20 11:14 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-20 11:14 UTC (permalink / raw)
To: Arnd Bergmann, arm, devicetree, Krzysztof Kozlowski,
linux-arm-kernel, Krzysztof Kozlowski, Olof Johansson,
Rob Herring, Wei Xu, linux-kernel, soc
On Wed, 15 Jun 2022 17:53:03 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[10/40] arm64: dts: hisilicon: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/717b3096da2ea205c6f31b4c2cd4485671d6ac79
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 34/40] ARM: dts: animeo: align gpio-key node names with dtschema
2022-06-16 0:53 ` [PATCH v3 34/40] ARM: dts: animeo: align gpio-key node names with dtschema Krzysztof Kozlowski
@ 2022-06-20 11:14 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-20 11:14 UTC (permalink / raw)
To: Arnd Bergmann, arm, devicetree, Krzysztof Kozlowski,
Krzysztof Kozlowski, Olof Johansson, Rob Herring, linux-kernel,
soc
On Wed, 15 Jun 2022 17:53:27 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[34/40] ARM: dts: animeo: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/523b53bb750d91148222297c3857bbde7c7483a8
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 35/40] ARM: dts: animeo: correct gpio-keys properties
2022-06-16 0:53 ` [PATCH v3 35/40] ARM: dts: animeo: correct gpio-keys properties Krzysztof Kozlowski
@ 2022-06-20 11:14 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-20 11:14 UTC (permalink / raw)
To: arm, Arnd Bergmann, devicetree, Krzysztof Kozlowski,
Krzysztof Kozlowski, Olof Johansson, Rob Herring, linux-kernel,
soc
On Wed, 15 Jun 2022 17:53:28 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[35/40] ARM: dts: animeo: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/91503e5a3b5aee6ac7240d1f03abe69253c14de9
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 10/40] arm64: dts: hisilicon: correct gpio-keys properties
2022-06-20 11:14 ` Krzysztof Kozlowski
@ 2022-06-21 2:28 ` Wei Xu
-1 siblings, 0 replies; 163+ messages in thread
From: Wei Xu @ 2022-06-21 2:28 UTC (permalink / raw)
To: Krzysztof Kozlowski, Arnd Bergmann, arm, devicetree,
linux-arm-kernel, Krzysztof Kozlowski, Olof Johansson,
Rob Herring, linux-kernel, soc
Hi Krzysztof,
On 2022/6/20 19:14, Krzysztof Kozlowski wrote:
> On Wed, 15 Jun 2022 17:53:03 -0700, Krzysztof Kozlowski wrote:
>> gpio-keys children do not use unit addresses.
>>
>>
>
> Applied, thanks!
Thanks!
Best Regards,
Wei
>
> [10/40] arm64: dts: hisilicon: correct gpio-keys properties
> https://git.kernel.org/krzk/linux/c/717b3096da2ea205c6f31b4c2cd4485671d6ac79
>
> Best regards,
>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 10/40] arm64: dts: hisilicon: correct gpio-keys properties
@ 2022-06-21 2:28 ` Wei Xu
0 siblings, 0 replies; 163+ messages in thread
From: Wei Xu @ 2022-06-21 2:28 UTC (permalink / raw)
To: Krzysztof Kozlowski, Arnd Bergmann, arm, devicetree,
linux-arm-kernel, Krzysztof Kozlowski, Olof Johansson,
Rob Herring, linux-kernel, soc
Hi Krzysztof,
On 2022/6/20 19:14, Krzysztof Kozlowski wrote:
> On Wed, 15 Jun 2022 17:53:03 -0700, Krzysztof Kozlowski wrote:
>> gpio-keys children do not use unit addresses.
>>
>>
>
> Applied, thanks!
Thanks!
Best Regards,
Wei
>
> [10/40] arm64: dts: hisilicon: correct gpio-keys properties
> https://git.kernel.org/krzk/linux/c/717b3096da2ea205c6f31b4c2cd4485671d6ac79
>
> Best regards,
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 09/40] arm64: dts: hisilicon: align gpio-key node names with dtschema
2022-06-20 11:14 ` Krzysztof Kozlowski
@ 2022-06-21 2:29 ` Wei Xu
-1 siblings, 0 replies; 163+ messages in thread
From: Wei Xu @ 2022-06-21 2:29 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, Arnd Bergmann, devicetree,
linux-arm-kernel, Krzysztof Kozlowski, linux-kernel,
Olof Johansson, Rob Herring, soc
Hi Krzysztof,
On 2022/6/20 19:14, Krzysztof Kozlowski wrote:
> On Wed, 15 Jun 2022 17:53:02 -0700, Krzysztof Kozlowski wrote:
>> The node names should be generic and DT schema expects certain pattern
>> (e.g. with key/button/switch).
>>
>>
>
> Applied, thanks!
Thanks!
Best Regards,
Wei
>
> [09/40] arm64: dts: hisilicon: align gpio-key node names with dtschema
> https://git.kernel.org/krzk/linux/c/111b4da2c2fc2551ecfe466616089e1223dc7ac1
>
> Best regards,
>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 09/40] arm64: dts: hisilicon: align gpio-key node names with dtschema
@ 2022-06-21 2:29 ` Wei Xu
0 siblings, 0 replies; 163+ messages in thread
From: Wei Xu @ 2022-06-21 2:29 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, Arnd Bergmann, devicetree,
linux-arm-kernel, Krzysztof Kozlowski, linux-kernel,
Olof Johansson, Rob Herring, soc
Hi Krzysztof,
On 2022/6/20 19:14, Krzysztof Kozlowski wrote:
> On Wed, 15 Jun 2022 17:53:02 -0700, Krzysztof Kozlowski wrote:
>> The node names should be generic and DT schema expects certain pattern
>> (e.g. with key/button/switch).
>>
>>
>
> Applied, thanks!
Thanks!
Best Regards,
Wei
>
> [09/40] arm64: dts: hisilicon: align gpio-key node names with dtschema
> https://git.kernel.org/krzk/linux/c/111b4da2c2fc2551ecfe466616089e1223dc7ac1
>
> Best regards,
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 11/40] arm64: dts: marvell: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-22 8:32 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-22 8:32 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +-
> arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 4 ++--
> 2 files changed, 3 insertions(+), 3 deletions(-)
Andrew, Gregory, Sebastian,
Any comments on Marvel parts? Shall I grab them with rest of cleanups?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 11/40] arm64: dts: marvell: align gpio-key node names with dtschema
@ 2022-06-22 8:32 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-22 8:32 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +-
> arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 4 ++--
> 2 files changed, 3 insertions(+), 3 deletions(-)
Andrew, Gregory, Sebastian,
Any comments on Marvel parts? Shall I grab them with rest of cleanups?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 21/40] arm64: dts: qcom: align gpio-key node names with dtschema
2022-06-16 0:53 ` [PATCH v3 21/40] arm64: dts: qcom: " Krzysztof Kozlowski
@ 2022-06-22 8:33 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
2 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-22 8:33 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andy Gross,
Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, linux-arm-msm,
devicetree, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 2 +-
> .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 2 +-
> .../arm64/boot/dts/qcom/msm8916-asus-z00l.dts | 4 ++--
> .../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 2 +-
> .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 2 +-
> .../boot/dts/qcom/msm8916-longcheer-l8910.dts | 2 +-
> .../qcom/msm8916-samsung-a2015-common.dtsi | 6 +++---
> .../boot/dts/qcom/msm8916-samsung-j5.dts | 4 ++--
> .../dts/qcom/msm8916-samsung-serranove.dts | 6 +++---
> .../dts/qcom/msm8916-wingtech-wt88047.dts | 2 +-
> .../boot/dts/qcom/msm8992-xiaomi-libra.dts | 2 +-
> .../dts/qcom/msm8994-msft-lumia-octagon.dtsi | 10 +++++-----
> .../qcom/msm8994-sony-xperia-kitakami.dtsi | 2 +-
> .../boot/dts/qcom/msm8996-xiaomi-common.dtsi | 6 +++---
> .../boot/dts/qcom/msm8998-fxtec-pro1.dts | 20 +++++++++----------
> .../boot/dts/qcom/msm8998-oneplus-common.dtsi | 6 +++---
> .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 8 ++++----
> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 +-
> .../dts/qcom/sdm630-sony-xperia-nile.dtsi | 8 ++++----
> .../boot/dts/qcom/sdm632-fairphone-fp3.dts | 2 +-
> .../boot/dts/qcom/sdm660-xiaomi-lavender.dts | 2 +-
> arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 +-
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++--
> .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 ++--
> .../boot/dts/qcom/sdm845-shift-axolotl.dts | 2 +-
> .../dts/qcom/sdm845-sony-xperia-tama.dtsi | 2 +-
> .../boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 2 +-
> .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 ++--
> .../qcom/sm6125-sony-xperia-seine-pdx201.dts | 2 +-
> .../boot/dts/qcom/sm7225-fairphone-fp4.dts | 2 +-
> arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 4 ++--
> .../dts/qcom/sm8150-microsoft-surface-duo.dts | 4 ++--
> arch/arm64/boot/dts/qcom/sm8250-hdk.dts | 4 ++--
> .../boot/dts/qcom/sm8250-sony-xperia-edo.dtsi | 2 +-
> .../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 2 +-
> 36 files changed, 71 insertions(+), 71 deletions(-)
>
Bjorn,
Any comments on Qualcomm parts? Shall I grab them with rest of cleanups?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
(?)
@ 2022-06-22 8:34 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-22 8:34 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Heiko Stuebner, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Changes since v2:
> 1. rk3308-evb.dts, rk3326-odroid-go2.dts: different names according to
> discussion.
> ---
Heiko,
Any comments on Rockchip parts? Can you pick them or shall I grab them
with rest of cleanups?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
@ 2022-06-22 8:34 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-22 8:34 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Heiko Stuebner, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Changes since v2:
> 1. rk3308-evb.dts, rk3326-odroid-go2.dts: different names according to
> discussion.
> ---
Heiko,
Any comments on Rockchip parts? Can you pick them or shall I grab them
with rest of cleanups?
Best regards,
Krzysztof
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
@ 2022-06-22 8:34 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-22 8:34 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Heiko Stuebner, devicetree,
linux-arm-kernel, linux-rockchip, linux-kernel
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Changes since v2:
> 1. rk3308-evb.dts, rk3326-odroid-go2.dts: different names according to
> discussion.
> ---
Heiko,
Any comments on Rockchip parts? Can you pick them or shall I grab them
with rest of cleanups?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
2022-06-22 8:34 ` Krzysztof Kozlowski
(?)
@ 2022-06-22 12:52 ` Heiko Stuebner
-1 siblings, 0 replies; 163+ messages in thread
From: Heiko Stuebner @ 2022-06-22 12:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-rockchip, linux-kernel, Krzysztof Kozlowski
Hi Krzysztof,
Am Mittwoch, 22. Juni 2022, 10:34:08 CEST schrieb Krzysztof Kozlowski:
> On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> > The node names should be generic and DT schema expects certain pattern
> > (e.g. with key/button/switch).
> >
> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >
> > ---
> >
> > Changes since v2:
> > 1. rk3308-evb.dts, rk3326-odroid-go2.dts: different names according to
> > discussion.
> > ---
>
> Heiko,
>
> Any comments on Rockchip parts? Can you pick them or shall I grab them
> with rest of cleanups?
no it looks good and I'll just pick up the patch.
Thanks
Heiko
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
@ 2022-06-22 12:52 ` Heiko Stuebner
0 siblings, 0 replies; 163+ messages in thread
From: Heiko Stuebner @ 2022-06-22 12:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-rockchip, linux-kernel, Krzysztof Kozlowski
Hi Krzysztof,
Am Mittwoch, 22. Juni 2022, 10:34:08 CEST schrieb Krzysztof Kozlowski:
> On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> > The node names should be generic and DT schema expects certain pattern
> > (e.g. with key/button/switch).
> >
> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >
> > ---
> >
> > Changes since v2:
> > 1. rk3308-evb.dts, rk3326-odroid-go2.dts: different names according to
> > discussion.
> > ---
>
> Heiko,
>
> Any comments on Rockchip parts? Can you pick them or shall I grab them
> with rest of cleanups?
no it looks good and I'll just pick up the patch.
Thanks
Heiko
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
@ 2022-06-22 12:52 ` Heiko Stuebner
0 siblings, 0 replies; 163+ messages in thread
From: Heiko Stuebner @ 2022-06-22 12:52 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, devicetree, linux-arm-kernel,
linux-rockchip, linux-kernel, Krzysztof Kozlowski
Hi Krzysztof,
Am Mittwoch, 22. Juni 2022, 10:34:08 CEST schrieb Krzysztof Kozlowski:
> On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> > The node names should be generic and DT schema expects certain pattern
> > (e.g. with key/button/switch).
> >
> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >
> > ---
> >
> > Changes since v2:
> > 1. rk3308-evb.dts, rk3326-odroid-go2.dts: different names according to
> > discussion.
> > ---
>
> Heiko,
>
> Any comments on Rockchip parts? Can you pick them or shall I grab them
> with rest of cleanups?
no it looks good and I'll just pick up the patch.
Thanks
Heiko
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
2022-06-16 0:52 ` Krzysztof Kozlowski
(?)
@ 2022-06-22 19:47 ` Heiko Stuebner
-1 siblings, 0 replies; 163+ messages in thread
From: Heiko Stuebner @ 2022-06-22 19:47 UTC (permalink / raw)
To: soc, Olof Johansson, arm, Krzysztof Kozlowski, Arnd Bergmann
Cc: Heiko Stuebner, openbmc, Khuong Dinh, Tony Lindgren,
Joel Stanley, linux-arm-msm, Shawn Guo, Michal Simek,
linux-aspeed, Benoît Cousson, Pengutronix Kernel Team,
linux-input, Alexandre Belloni, Andy Gross, Gregory Clement,
Wei Xu, Sebastian Hesselbarth, Bjorn Andersson, devicetree,
Peter Rosin, Thierry Reding, linux-rockchip, linux-kernel,
Sascha Hauer, Jonathan Neuschäfer, Fabio Estevam,
Rob Herring, Nicolas Ferre, Li Yang, linux-tegra, linux-gpio,
Dmitry Torokhov, linux-omap, Matthias Brugger, linux-arm-kernel,
Tero Kristo, NXP Linux Team, Linus Walleij, Claudiu Beznea,
Russell King, Krzysztof Kozlowski, Vignesh Raghavendra,
Andrew Jeffery, Andrew Lunn, Nishanth Menon, Jonathan Hunter,
linux-mediatek
On Wed, 15 Jun 2022 17:52:24 -0700, Krzysztof Kozlowski wrote:
> Merging
> =======
> 1. dt-bindings: rebased on top of Rob's:
> https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
>
> 2. DTS patches are independent. They can be picked up directly by sub-arch
> maintainers, by Arnd or Olof, or eventually by me (if you wish).
>
> [...]
Applied, thanks!
[26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
commit: 517ed0ffd3cc691bef747288d51d01d2705b2251
In the pinenote dts the original patch changed "cover" to
switch, so to keep the cover information intact, I changed
the node to "switch-cover" ... similar to other "switch-lid"
instances in some other Rockchip devicetrees.
[27/40] ARM: dts: rockchip: align gpio-key node names with dtschema
commit: 271e2c92285075a890c58cba9ad5979a8959f6ff
[28/40] ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties
commit: e5a3cbe8b45b0a436a39cc969b7bcc8353248018
Best regards,
--
Heiko Stuebner <heiko@sntech.de>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
@ 2022-06-22 19:47 ` Heiko Stuebner
0 siblings, 0 replies; 163+ messages in thread
From: Heiko Stuebner @ 2022-06-22 19:47 UTC (permalink / raw)
To: soc, Olof Johansson, arm, Krzysztof Kozlowski, Arnd Bergmann
Cc: Heiko Stuebner, openbmc, Khuong Dinh, Tony Lindgren,
Joel Stanley, linux-arm-msm, Shawn Guo, Michal Simek,
linux-aspeed, Benoît Cousson, Pengutronix Kernel Team,
linux-input, Alexandre Belloni, Andy Gross, Gregory Clement,
Wei Xu, Sebastian Hesselbarth, Bjorn Andersson, devicetree,
Peter Rosin, Thierry Reding, linux-rockchip, linux-kernel,
Sascha Hauer, Jonathan Neuschäfer, Fabio Estevam,
Rob Herring, Nicolas Ferre, Li Yang, linux-tegra, linux-gpio,
Dmitry Torokhov, linux-omap, Matthias Brugger, linux-arm-kernel,
Tero Kristo, NXP Linux Team, Linus Walleij, Claudiu Beznea,
Russell King, Krzysztof Kozlowski, Vignesh Raghavendra,
Andrew Jeffery, Andrew Lunn, Nishanth Menon, Jonathan Hunter,
linux-mediatek
On Wed, 15 Jun 2022 17:52:24 -0700, Krzysztof Kozlowski wrote:
> Merging
> =======
> 1. dt-bindings: rebased on top of Rob's:
> https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
>
> 2. DTS patches are independent. They can be picked up directly by sub-arch
> maintainers, by Arnd or Olof, or eventually by me (if you wish).
>
> [...]
Applied, thanks!
[26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
commit: 517ed0ffd3cc691bef747288d51d01d2705b2251
In the pinenote dts the original patch changed "cover" to
switch, so to keep the cover information intact, I changed
the node to "switch-cover" ... similar to other "switch-lid"
instances in some other Rockchip devicetrees.
[27/40] ARM: dts: rockchip: align gpio-key node names with dtschema
commit: 271e2c92285075a890c58cba9ad5979a8959f6ff
[28/40] ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties
commit: e5a3cbe8b45b0a436a39cc969b7bcc8353248018
Best regards,
--
Heiko Stuebner <heiko@sntech.de>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
@ 2022-06-22 19:47 ` Heiko Stuebner
0 siblings, 0 replies; 163+ messages in thread
From: Heiko Stuebner @ 2022-06-22 19:47 UTC (permalink / raw)
To: soc, Olof Johansson, arm, Krzysztof Kozlowski, Arnd Bergmann
Cc: Nishanth Menon, Andrew Lunn, Alexandre Belloni, Heiko Stuebner,
linux-aspeed, Tony Lindgren, Linus Walleij, Bjorn Andersson,
Matthias Brugger, Thierry Reding, Krzysztof Kozlowski,
Russell King, Li Yang, Fabio Estevam, Vignesh Raghavendra,
Khuong Dinh, Gregory Clement, Michal Simek, Wei Xu,
Claudiu Beznea, linux-rockchip, Andy Gross, Joel Stanley,
linux-input, Sebastian Hesselbarth, Jonathan Hunter, devicetree,
Pengutronix Kernel Team, linux-arm-msm, Sascha Hauer,
Nicolas Ferre, Jonathan Neuschäfer, linux-gpio, Rob Herring,
linux-mediatek, linux-tegra, NXP Linux Team, linux-omap,
linux-arm-kernel, Tero Kristo, Andrew Jeffery, Dmitry Torokhov,
linux-kernel, Peter Rosin, Benoît Cousson, Shawn Guo,
openbmc
On Wed, 15 Jun 2022 17:52:24 -0700, Krzysztof Kozlowski wrote:
> Merging
> =======
> 1. dt-bindings: rebased on top of Rob's:
> https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
>
> 2. DTS patches are independent. They can be picked up directly by sub-arch
> maintainers, by Arnd or Olof, or eventually by me (if you wish).
>
> [...]
Applied, thanks!
[26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
commit: 517ed0ffd3cc691bef747288d51d01d2705b2251
In the pinenote dts the original patch changed "cover" to
switch, so to keep the cover information intact, I changed
the node to "switch-cover" ... similar to other "switch-lid"
instances in some other Rockchip devicetrees.
[27/40] ARM: dts: rockchip: align gpio-key node names with dtschema
commit: 271e2c92285075a890c58cba9ad5979a8959f6ff
[28/40] ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties
commit: e5a3cbe8b45b0a436a39cc969b7bcc8353248018
Best regards,
--
Heiko Stuebner <heiko@sntech.de>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 31/40] ARM: dts: xilinx: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-23 8:10 ` Michal Simek
-1 siblings, 0 replies; 163+ messages in thread
From: Michal Simek @ 2022-06-23 8:10 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, Michal Simek, devicetree,
linux-arm-kernel, linux-kernel
On 6/16/22 02:53, Krzysztof Kozlowski wrote:
> CAUTION: This message has originated from an External Source. Please use proper judgment and caution when opening attachments, clicking links, or responding to this email.
>
>
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm/boot/dts/zynq-zc702.dts | 4 ++--
> arch/arm/boot/dts/zynq-zturn-common.dtsi | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
Applied.
M
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 31/40] ARM: dts: xilinx: align gpio-key node names with dtschema
@ 2022-06-23 8:10 ` Michal Simek
0 siblings, 0 replies; 163+ messages in thread
From: Michal Simek @ 2022-06-23 8:10 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, Michal Simek, devicetree,
linux-arm-kernel, linux-kernel
On 6/16/22 02:53, Krzysztof Kozlowski wrote:
> CAUTION: This message has originated from an External Source. Please use proper judgment and caution when opening attachments, clicking links, or responding to this email.
>
>
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm/boot/dts/zynq-zc702.dts | 4 ++--
> arch/arm/boot/dts/zynq-zturn-common.dtsi | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
Applied.
M
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 30/40] arm64: dts: xilinx: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-23 8:10 ` Michal Simek
-1 siblings, 0 replies; 163+ messages in thread
From: Michal Simek @ 2022-06-23 8:10 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, Michal Simek, devicetree,
linux-arm-kernel, linux-kernel
On 6/16/22 02:53, Krzysztof Kozlowski wrote:
> CAUTION: This message has originated from an External Source. Please use proper judgment and caution when opening attachments, clicking links, or responding to this email.
>
>
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 2 +-
> arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 +-
> arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 2 +-
> arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 +-
> arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 +-
> 5 files changed, 5 insertions(+), 5 deletions(-)
Applied.
M
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 30/40] arm64: dts: xilinx: align gpio-key node names with dtschema
@ 2022-06-23 8:10 ` Michal Simek
0 siblings, 0 replies; 163+ messages in thread
From: Michal Simek @ 2022-06-23 8:10 UTC (permalink / raw)
To: Krzysztof Kozlowski, arm, soc, Arnd Bergmann, Olof Johansson,
Rob Herring, Krzysztof Kozlowski, Michal Simek, devicetree,
linux-arm-kernel, linux-kernel
On 6/16/22 02:53, Krzysztof Kozlowski wrote:
> CAUTION: This message has originated from an External Source. Please use proper judgment and caution when opening attachments, clicking links, or responding to this email.
>
>
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 2 +-
> arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 2 +-
> arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 2 +-
> arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 2 +-
> arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 2 +-
> 5 files changed, 5 insertions(+), 5 deletions(-)
Applied.
M
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 19/40] arm64: dts: tegra: align gpio-key node names with dtschema
2022-06-16 0:53 ` [PATCH v3 19/40] arm64: dts: tegra: " Krzysztof Kozlowski
@ 2022-06-24 16:08 ` Thierry Reding
2022-06-24 16:09 ` Krzysztof Kozlowski
0 siblings, 1 reply; 163+ messages in thread
From: Thierry Reding @ 2022-06-24 16:08 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Jonathan Hunter, devicetree, linux-tegra,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1466 bytes --]
On Wed, Jun 15, 2022 at 05:53:12PM -0700, Krzysztof Kozlowski wrote:
[...]
> diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
> index f16acb4cabaa..62d58221ad3c 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
> @@ -1030,7 +1030,7 @@ clk32k_in: clock-32k {
> gpio-keys {
> compatible = "gpio-keys";
>
> - lid {
> + switch-lid {
> label = "Lid";
> gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
> linux,input-type = <5>;
> @@ -1039,7 +1039,7 @@ lid {
> wakeup-source;
> };
>
> - power {
> + switch-power {
This one is actually a key.
[...]
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
> index a263d51882ee..8494c7b2961b 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
[...]
> @@ -1772,7 +1772,7 @@ lid {
> wakeup-source;
> };
>
> - tablet_mode {
> + key-tablet-mode {
> label = "Tablet Mode";
> gpios = <&gpio TEGRA_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
> linux,input-type = <EV_SW>;
And this one more like a switch since it's triggered by a magnet, as far
as I understand.
No need to resend, I can fix these up when I apply. Just let me know if
you have any objections to me making those changes.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 19/40] arm64: dts: tegra: align gpio-key node names with dtschema
2022-06-24 16:08 ` Thierry Reding
@ 2022-06-24 16:09 ` Krzysztof Kozlowski
2022-06-27 8:45 ` Krzysztof Kozlowski
0 siblings, 1 reply; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-24 16:09 UTC (permalink / raw)
To: Thierry Reding
Cc: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Jonathan Hunter, devicetree, linux-tegra,
linux-kernel
On 24/06/2022 18:08, Thierry Reding wrote:
> On Wed, Jun 15, 2022 at 05:53:12PM -0700, Krzysztof Kozlowski wrote:
> [...]
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
>> index f16acb4cabaa..62d58221ad3c 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
>> +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
>> @@ -1030,7 +1030,7 @@ clk32k_in: clock-32k {
>> gpio-keys {
>> compatible = "gpio-keys";
>>
>> - lid {
>> + switch-lid {
>> label = "Lid";
>> gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
>> linux,input-type = <5>;
>> @@ -1039,7 +1039,7 @@ lid {
>> wakeup-source;
>> };
>>
>> - power {
>> + switch-power {
>
> This one is actually a key.
>
> [...]
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
>> index a263d51882ee..8494c7b2961b 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
> [...]
>> @@ -1772,7 +1772,7 @@ lid {
>> wakeup-source;
>> };
>>
>> - tablet_mode {
>> + key-tablet-mode {
>> label = "Tablet Mode";
>> gpios = <&gpio TEGRA_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
>> linux,input-type = <EV_SW>;
>
> And this one more like a switch since it's triggered by a magnet, as far
> as I understand.
>
> No need to resend, I can fix these up when I apply. Just let me know if
> you have any objections to me making those changes.
Sounds good, thanks for catching these.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
2022-06-16 0:52 ` [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name Krzysztof Kozlowski
@ 2022-06-25 23:28 ` Linus Walleij
2022-06-27 22:18 ` Rob Herring
2022-06-28 19:26 ` Linus Walleij
2 siblings, 0 replies; 163+ messages in thread
From: Linus Walleij @ 2022-06-25 23:28 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: arm, soc, Arnd Bergmann, Olof Johansson,
Jonathan Neuschäfer, Rob Herring, Krzysztof Kozlowski,
openbmc, linux-gpio, devicetree, linux-kernel
On Thu, Jun 16, 2022 at 2:54 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
> gpio-keys schema requires keys to have more generic name.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
OK, do you want me to apply this one patch to the pinctrl tree or
will you collect a series?
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
@ 2022-06-25 23:28 ` Linus Walleij
0 siblings, 0 replies; 163+ messages in thread
From: Linus Walleij @ 2022-06-25 23:28 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: devicetree, arm, Arnd Bergmann, openbmc,
Jonathan Neuschäfer, linux-kernel, linux-gpio, soc,
Rob Herring, Krzysztof Kozlowski, Olof Johansson
On Thu, Jun 16, 2022 at 2:54 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
> gpio-keys schema requires keys to have more generic name.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
OK, do you want me to apply this one patch to the pinctrl tree or
will you collect a series?
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
2022-06-25 23:28 ` Linus Walleij
@ 2022-06-26 10:28 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-26 10:28 UTC (permalink / raw)
To: Linus Walleij
Cc: arm, soc, Arnd Bergmann, Olof Johansson,
Jonathan Neuschäfer, Rob Herring, Krzysztof Kozlowski,
openbmc, linux-gpio, devicetree, linux-kernel
On 26/06/2022 01:28, Linus Walleij wrote:
> On Thu, Jun 16, 2022 at 2:54 AM Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>
>> gpio-keys schema requires keys to have more generic name.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> OK, do you want me to apply this one patch to the pinctrl tree or
> will you collect a series?
I would prefer if you picked it up. I am not aware of any conflicts.
I am picking up only some left-overs and in general better if the
subsystem maintainer takes these.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
@ 2022-06-26 10:28 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-26 10:28 UTC (permalink / raw)
To: Linus Walleij
Cc: devicetree, arm, Arnd Bergmann, openbmc,
Jonathan Neuschäfer, linux-kernel, linux-gpio, soc,
Rob Herring, Krzysztof Kozlowski, Olof Johansson
On 26/06/2022 01:28, Linus Walleij wrote:
> On Thu, Jun 16, 2022 at 2:54 AM Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>
>> gpio-keys schema requires keys to have more generic name.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> OK, do you want me to apply this one patch to the pinctrl tree or
> will you collect a series?
I would prefer if you picked it up. I am not aware of any conflicts.
I am picking up only some left-overs and in general better if the
subsystem maintainer takes these.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 01/40] dt-bindings: input: gpio-keys: enforce node names to match all properties
2022-06-16 0:52 ` [PATCH v3 01/40] dt-bindings: input: gpio-keys: enforce node names to match all properties Krzysztof Kozlowski
@ 2022-06-27 8:17 ` Krzysztof Kozlowski
2022-07-05 11:39 ` Krzysztof Kozlowski
0 siblings, 1 reply; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 8:17 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: soc, linux-kernel, Olof Johansson, devicetree, Arnd Bergmann,
Krzysztof Kozlowski, Rob Herring, arm, linux-input, Rob Herring
On 16/06/2022 02:52, Krzysztof Kozlowski wrote:
> The gpio-keys DT schema matches all properties with a wide pattern and
> applies specific schema to children. This has drawback - all regular
> properties are also matched and are silently ignored, even if they are
> not described in schema. Basically this allows any non-object property
> to be present.
>
> Enforce specific naming pattern for children (keys) to narrow the
> pattern thus do not match other properties. This will require all
> children to be properly prefixed or suffixed (button, event, switch or
> key).
>
> Removal of "if:" within patternProperties causes drop of one indentation
> level, but there are no other changes in the affected block.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> .../devicetree/bindings/input/gpio-keys.yaml | 157 +++++++++---------
> 1 file changed, 77 insertions(+), 80 deletions(-)
>
Dmitry,
Any comments from your side? Are you planning to pick up the dt-bindings
here (patch 1-3)?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 11/40] arm64: dts: marvell: align gpio-key node names with dtschema
2022-06-22 8:32 ` Krzysztof Kozlowski
@ 2022-06-27 8:42 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 8:42 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
On 22/06/2022 10:32, Krzysztof Kozlowski wrote:
> On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
>> The node names should be generic and DT schema expects certain pattern
>> (e.g. with key/button/switch).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>> arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +-
>> arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 4 ++--
>> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> Andrew, Gregory, Sebastian,
>
> Any comments on Marvel parts? Shall I grab them with rest of cleanups?
>
I guess answer is yes, I shall. :)
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 11/40] arm64: dts: marvell: align gpio-key node names with dtschema
@ 2022-06-27 8:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 8:42 UTC (permalink / raw)
To: arm, soc, Arnd Bergmann, Olof Johansson, Andrew Lunn,
Gregory Clement, Sebastian Hesselbarth, Rob Herring,
Krzysztof Kozlowski, linux-arm-kernel, devicetree, linux-kernel
On 22/06/2022 10:32, Krzysztof Kozlowski wrote:
> On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
>> The node names should be generic and DT schema expects certain pattern
>> (e.g. with key/button/switch).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>> arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +-
>> arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 4 ++--
>> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> Andrew, Gregory, Sebastian,
>
> Any comments on Marvel parts? Shall I grab them with rest of cleanups?
>
I guess answer is yes, I shall. :)
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 19/40] arm64: dts: tegra: align gpio-key node names with dtschema
2022-06-24 16:09 ` Krzysztof Kozlowski
@ 2022-06-27 8:45 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 8:45 UTC (permalink / raw)
To: Thierry Reding
Cc: arm, soc, Arnd Bergmann, Olof Johansson, Rob Herring,
Krzysztof Kozlowski, Jonathan Hunter, devicetree, linux-tegra,
linux-kernel
On 24/06/2022 18:09, Krzysztof Kozlowski wrote:
> On 24/06/2022 18:08, Thierry Reding wrote:
>> On Wed, Jun 15, 2022 at 05:53:12PM -0700, Krzysztof Kozlowski wrote:
>> [...]
>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
>>> index f16acb4cabaa..62d58221ad3c 100644
>>> --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
>>> +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
>>> @@ -1030,7 +1030,7 @@ clk32k_in: clock-32k {
>>> gpio-keys {
>>> compatible = "gpio-keys";
>>>
>>> - lid {
>>> + switch-lid {
>>> label = "Lid";
>>> gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
>>> linux,input-type = <5>;
>>> @@ -1039,7 +1039,7 @@ lid {
>>> wakeup-source;
>>> };
>>>
>>> - power {
>>> + switch-power {
>>
>> This one is actually a key.
>>
>> [...]
>>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
>>> index a263d51882ee..8494c7b2961b 100644
>>> --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
>>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
>> [...]
>>> @@ -1772,7 +1772,7 @@ lid {
>>> wakeup-source;
>>> };
>>>
>>> - tablet_mode {
>>> + key-tablet-mode {
>>> label = "Tablet Mode";
>>> gpios = <&gpio TEGRA_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
>>> linux,input-type = <EV_SW>;
>>
>> And this one more like a switch since it's triggered by a magnet, as far
>> as I understand.
>>
>> No need to resend, I can fix these up when I apply. Just let me know if
>> you have any objections to me making those changes.
>
> Sounds good, thanks for catching these.
Hi Thierry,
To be more explicit - no objects for taking these, please apply.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 36/40] ARM: dts: aspeed: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-27 8:49 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 8:49 UTC (permalink / raw)
To: Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery
Cc: soc, arm, linux-arm-kernel, linux-kernel, Arnd Bergmann,
linux-aspeed, devicetree, Olof Johansson, Rob Herring
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 30 ++++++------
> .../boot/dts/aspeed-bmc-bytedance-g220a.dts | 48 +++++++++----------
> arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 8 ++--
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 12 ++---
> .../boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 22 ++++-----
> arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 23 ++++-----
> arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 20 ++++----
> arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 2 +-
> arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
> arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 2 +-
> arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 30 ++++++------
> arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 12 ++---
> arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 4 +-
> .../boot/dts/aspeed-bmc-opp-witherspoon.dts | 16 +++----
> arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 4 +-
> 15 files changed, 118 insertions(+), 117 deletions(-)
>
Joel,
Any comments on the Aspeed patches? Do you intend to take them or shall
I handle them with the rest?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 36/40] ARM: dts: aspeed: align gpio-key node names with dtschema
@ 2022-06-27 8:49 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 8:49 UTC (permalink / raw)
To: Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery
Cc: soc, arm, linux-arm-kernel, linux-kernel, Arnd Bergmann,
linux-aspeed, devicetree, Olof Johansson, Rob Herring
On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 30 ++++++------
> .../boot/dts/aspeed-bmc-bytedance-g220a.dts | 48 +++++++++----------
> arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 8 ++--
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 12 ++---
> .../boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 22 ++++-----
> arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 23 ++++-----
> arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 20 ++++----
> arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 2 +-
> arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
> arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 2 +-
> arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 30 ++++++------
> arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 12 ++---
> arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 4 +-
> .../boot/dts/aspeed-bmc-opp-witherspoon.dts | 16 +++----
> arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 4 +-
> 15 files changed, 118 insertions(+), 117 deletions(-)
>
Joel,
Any comments on the Aspeed patches? Do you intend to take them or shall
I handle them with the rest?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 11/40] arm64: dts: marvell: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: gregory.clement, soc, linux-arm-kernel, andrew, linux-kernel,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, arm, sebastian.hesselbarth, robh+dt, olof
On Wed, 15 Jun 2022 17:53:04 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[11/40] arm64: dts: marvell: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/ebb8ba54950a1c6382647e573ab597e2b7b4af1b
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 11/40] arm64: dts: marvell: align gpio-key node names with dtschema
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: gregory.clement, soc, linux-arm-kernel, andrew, linux-kernel,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, arm, sebastian.hesselbarth, robh+dt, olof
On Wed, 15 Jun 2022 17:53:04 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[11/40] arm64: dts: marvell: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/ebb8ba54950a1c6382647e573ab597e2b7b4af1b
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 12/40] arm64: dts: marvell: armada-3720: align lednode names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: gregory.clement, soc, linux-arm-kernel, andrew, linux-kernel,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, arm, sebastian.hesselbarth, robh+dt, olof
On Wed, 15 Jun 2022 17:53:05 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> with 'led'.
>
>
Applied, thanks!
[12/40] arm64: dts: marvell: armada-3720: align lednode names with dtschema
https://git.kernel.org/krzk/linux/c/2b090180dced85ccf27f276c1b6c9521d4c4120e
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 12/40] arm64: dts: marvell: armada-3720: align lednode names with dtschema
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: gregory.clement, soc, linux-arm-kernel, andrew, linux-kernel,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, arm, sebastian.hesselbarth, robh+dt, olof
On Wed, 15 Jun 2022 17:53:05 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> with 'led'.
>
>
Applied, thanks!
[12/40] arm64: dts: marvell: armada-3720: align lednode names with dtschema
https://git.kernel.org/krzk/linux/c/2b090180dced85ccf27f276c1b6c9521d4c4120e
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 13/40] ARM: dts: marvell: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: gregory.clement, soc, linux-arm-kernel, andrew, linux-kernel,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, linux, arm, sebastian.hesselbarth, robh+dt, olof
On Wed, 15 Jun 2022 17:53:06 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[13/40] ARM: dts: marvell: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/41340053cc72180e9095ca02418a5ab80794983c
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 13/40] ARM: dts: marvell: align gpio-key node names with dtschema
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: gregory.clement, soc, linux-arm-kernel, andrew, linux-kernel,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, linux, arm, sebastian.hesselbarth, robh+dt, olof
On Wed, 15 Jun 2022 17:53:06 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[13/40] ARM: dts: marvell: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/41340053cc72180e9095ca02418a5ab80794983c
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 14/40] ARM: dts: marvell: correct gpio-keys properties
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: gregory.clement, soc, linux-arm-kernel, andrew, linux-kernel,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, arm, sebastian.hesselbarth, robh+dt, olof
On Wed, 15 Jun 2022 17:53:07 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[14/40] ARM: dts: marvell: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/8b0848f57769ae9ee4b8104a5ba7c7ee98d1fd35
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 14/40] ARM: dts: marvell: correct gpio-keys properties
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: gregory.clement, soc, linux-arm-kernel, andrew, linux-kernel,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, arm, sebastian.hesselbarth, robh+dt, olof
On Wed, 15 Jun 2022 17:53:07 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[14/40] ARM: dts: marvell: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/8b0848f57769ae9ee4b8104a5ba7c7ee98d1fd35
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 21/40] arm64: dts: qcom: align gpio-key node names with dtschema
2022-06-16 0:53 ` [PATCH v3 21/40] arm64: dts: qcom: " Krzysztof Kozlowski
2022-06-22 8:33 ` Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
2 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: soc, robh+dt, linux-arm-msm, linux-kernel, agross,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, arm, bjorn.andersson, olof
On Wed, 15 Jun 2022 17:53:14 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[21/40] arm64: dts: qcom: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/f118c00637144d0cec0b862dda283f565413539b
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 22/40] arm64: dts: qcom: correct gpio-keys properties
2022-06-16 0:53 ` [PATCH v3 22/40] arm64: dts: qcom: correct gpio-keys properties Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
1 sibling, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: soc, robh+dt, linux-arm-msm, linux-kernel, agross,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, arm, bjorn.andersson, olof
On Wed, 15 Jun 2022 17:53:15 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[22/40] arm64: dts: qcom: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/b5ddac0090d9a36a8279a8a998fb5366df1db487
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 23/40] arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keys
2022-06-16 0:53 ` [PATCH v3 23/40] arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keys Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
1 sibling, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: soc, linux-arm-msm, linux-kernel, agross, krzysztof.kozlowski,
Arnd Bergmann, krzysztof.kozlowski+dt, devicetree, arm, robh+dt,
olof, bjorn.andersson
On Wed, 15 Jun 2022 17:53:16 -0700, Krzysztof Kozlowski wrote:
> Nodes do not need explicit status=okay.
>
>
Applied, thanks!
[23/40] arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keys
https://git.kernel.org/krzk/linux/c/aa30ba37ebb4c66c9d0e6b6bddbeda7f84ac806e
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 24/40] arm64: dts: qcom: align led node names with dtschema
2022-06-16 0:53 ` [PATCH v3 24/40] arm64: dts: qcom: align led node names with dtschema Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
1 sibling, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: soc, robh+dt, linux-arm-msm, linux-kernel, agross,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, arm, bjorn.andersson, olof
On Wed, 15 Jun 2022 17:53:17 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> with 'led'.
>
>
Applied, thanks!
[24/40] arm64: dts: qcom: align led node names with dtschema
https://git.kernel.org/krzk/linux/c/365f7c26080fefc78a6d76ee4ba29e33a5a270d5
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 25/40] ARM: dts: qcom: align gpio-key node names with dtschema
2022-06-16 0:53 ` [PATCH v3 25/40] ARM: dts: qcom: align gpio-key " Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: soc, linux-arm-msm, linux-kernel, agross, krzysztof.kozlowski,
Arnd Bergmann, krzysztof.kozlowski+dt, devicetree, arm, robh+dt,
olof, bjorn.andersson
On Wed, 15 Jun 2022 17:53:18 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[25/40] ARM: dts: qcom: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/7ccf54f23a1453d07c67dc000d1ab1fb8b3581c6
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 32/40] ARM: dts: omap: align gpio-key node names with dtschema
2022-06-16 0:53 ` [PATCH v3 32/40] ARM: dts: omap: " Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: soc, tony, linux-omap, bcousson, linux-kernel,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, arm, robh+dt, olof
On Wed, 15 Jun 2022 17:53:25 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[32/40] ARM: dts: omap: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/b1c9af5fec442b164849dc6802ec3bdb4b0c4768
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 33/40] ARM: dts: omap: correct gpio-keys properties
2022-06-16 0:53 ` [PATCH v3 33/40] ARM: dts: omap: correct gpio-keys properties Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: soc, tony, linux-omap, bcousson, linux-kernel,
krzysztof.kozlowski, Arnd Bergmann, krzysztof.kozlowski+dt,
devicetree, arm, robh+dt, olof
On Wed, 15 Jun 2022 17:53:26 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[33/40] ARM: dts: omap: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/54ab5f367142577b8280f5b03eeb36616980cd68
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 38/40] ARM: dts: at91: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: soc, linux-arm-kernel, nicolas.ferre, claudiu.beznea,
linux-kernel, peda, krzysztof.kozlowski, Arnd Bergmann,
krzysztof.kozlowski+dt, devicetree, arm, alexandre.belloni,
robh+dt, olof
On Wed, 15 Jun 2022 17:53:31 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[38/40] ARM: dts: at91: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/17413b15ed9398e5d7f01f0da0da6043bb8392c7
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 38/40] ARM: dts: at91: align gpio-key node names with dtschema
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: soc, linux-arm-kernel, nicolas.ferre, claudiu.beznea,
linux-kernel, peda, krzysztof.kozlowski, Arnd Bergmann,
krzysztof.kozlowski+dt, devicetree, arm, alexandre.belloni,
robh+dt, olof
On Wed, 15 Jun 2022 17:53:31 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[38/40] ARM: dts: at91: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/17413b15ed9398e5d7f01f0da0da6043bb8392c7
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 39/40] ARM: dts: at91: correct gpio-keys properties
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: soc, linux-arm-kernel, nicolas.ferre, claudiu.beznea,
linux-kernel, krzysztof.kozlowski, Arnd Bergmann,
krzysztof.kozlowski+dt, devicetree, arm, alexandre.belloni,
robh+dt, olof
On Wed, 15 Jun 2022 17:53:32 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[39/40] ARM: dts: at91: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/fa8cc83a3bffaa868b789a424d5573b7901edd7c
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 39/40] ARM: dts: at91: correct gpio-keys properties
@ 2022-06-27 9:15 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:15 UTC (permalink / raw)
To: soc, linux-arm-kernel, nicolas.ferre, claudiu.beznea,
linux-kernel, krzysztof.kozlowski, Arnd Bergmann,
krzysztof.kozlowski+dt, devicetree, arm, alexandre.belloni,
robh+dt, olof
On Wed, 15 Jun 2022 17:53:32 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[39/40] ARM: dts: at91: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/fa8cc83a3bffaa868b789a424d5573b7901edd7c
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 40/40] ARM: dts: at91: drop unneeded status from gpio-keys
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-06-27 9:16 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:16 UTC (permalink / raw)
To: soc, linux-arm-kernel, nicolas.ferre, claudiu.beznea,
linux-kernel, krzysztof.kozlowski, Arnd Bergmann,
krzysztof.kozlowski+dt, devicetree, arm, alexandre.belloni,
robh+dt, olof
On Wed, 15 Jun 2022 17:53:33 -0700, Krzysztof Kozlowski wrote:
> Nodes do not need explicit status=okay.
>
>
Applied, thanks!
[40/40] ARM: dts: at91: drop unneeded status from gpio-keys
https://git.kernel.org/krzk/linux/c/592feeea113553be142680a25a9c0850daae3567
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 40/40] ARM: dts: at91: drop unneeded status from gpio-keys
@ 2022-06-27 9:16 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-27 9:16 UTC (permalink / raw)
To: soc, linux-arm-kernel, nicolas.ferre, claudiu.beznea,
linux-kernel, krzysztof.kozlowski, Arnd Bergmann,
krzysztof.kozlowski+dt, devicetree, arm, alexandre.belloni,
robh+dt, olof
On Wed, 15 Jun 2022 17:53:33 -0700, Krzysztof Kozlowski wrote:
> Nodes do not need explicit status=okay.
>
>
Applied, thanks!
[40/40] ARM: dts: at91: drop unneeded status from gpio-keys
https://git.kernel.org/krzk/linux/c/592feeea113553be142680a25a9c0850daae3567
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
2022-06-16 0:52 ` [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name Krzysztof Kozlowski
@ 2022-06-27 22:18 ` Rob Herring
2022-06-27 22:18 ` Rob Herring
2022-06-28 19:26 ` Linus Walleij
2 siblings, 0 replies; 163+ messages in thread
From: Rob Herring @ 2022-06-27 22:18 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Rob Herring, arm, Krzysztof Kozlowski, Olof Johansson,
linux-gpio, Jonathan Neuschäfer, linux-kernel, soc,
Linus Walleij, Arnd Bergmann, devicetree, openbmc
On Wed, 15 Jun 2022 17:52:57 -0700, Krzysztof Kozlowski wrote:
> gpio-keys schema requires keys to have more generic name.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Changes since v2:
> 1. Name it "button-uid"
> ---
> .../devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
@ 2022-06-27 22:18 ` Rob Herring
0 siblings, 0 replies; 163+ messages in thread
From: Rob Herring @ 2022-06-27 22:18 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: devicetree, arm, Arnd Bergmann, Linus Walleij,
Jonathan Neuschäfer, linux-kernel, linux-gpio, soc,
Rob Herring, Krzysztof Kozlowski, Olof Johansson, openbmc
On Wed, 15 Jun 2022 17:52:57 -0700, Krzysztof Kozlowski wrote:
> gpio-keys schema requires keys to have more generic name.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Changes since v2:
> 1. Name it "button-uid"
> ---
> .../devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
2022-06-16 0:52 ` [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name Krzysztof Kozlowski
@ 2022-06-28 19:26 ` Linus Walleij
2022-06-27 22:18 ` Rob Herring
2022-06-28 19:26 ` Linus Walleij
2 siblings, 0 replies; 163+ messages in thread
From: Linus Walleij @ 2022-06-28 19:26 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: arm, soc, Arnd Bergmann, Olof Johansson,
Jonathan Neuschäfer, Rob Herring, Krzysztof Kozlowski,
openbmc, linux-gpio, devicetree, linux-kernel
On Thu, Jun 16, 2022 at 2:54 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
> gpio-keys schema requires keys to have more generic name.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patch applied!
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
@ 2022-06-28 19:26 ` Linus Walleij
0 siblings, 0 replies; 163+ messages in thread
From: Linus Walleij @ 2022-06-28 19:26 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: devicetree, arm, Arnd Bergmann, openbmc,
Jonathan Neuschäfer, linux-kernel, linux-gpio, soc,
Rob Herring, Krzysztof Kozlowski, Olof Johansson
On Thu, Jun 16, 2022 at 2:54 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
> gpio-keys schema requires keys to have more generic name.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patch applied!
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
2022-06-16 0:52 ` Krzysztof Kozlowski
` (43 preceding siblings ...)
(?)
@ 2022-07-01 20:41 ` patchwork-bot+linux-soc
-1 siblings, 0 replies; 163+ messages in thread
From: patchwork-bot+linux-soc @ 2022-07-01 20:41 UTC (permalink / raw)
To: Krzysztof Kozlowski; +Cc: soc
Hello:
This series was applied to soc/soc.git (for-next)
by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
On Wed, 15 Jun 2022 17:52:24 -0700 you wrote:
> Hi,
>
> Merging
> =======
> 1. dt-bindings: rebased on top of Rob's:
> https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
>
> [...]
Here is the summary with links:
- [v3,01/40] dt-bindings: input: gpio-keys: enforce node names to match all properties
(no matching commit)
- [v3,02/40] dt-bindings: input: gpio-keys: reference input.yaml and document properties
(no matching commit)
- [v3,03/40] dt-bindings: input: gpio-keys: accept also interrupt-extended
(no matching commit)
- [v3,04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name
(no matching commit)
- [v3,05/40] arm64: dts: apm: correct gpio-keys properties
https://git.kernel.org/soc/soc/c/2453119fe6ee
- [v3,06/40] arm64: dts: broadcom: align gpio-key node names with dtschema
https://git.kernel.org/soc/soc/c/ea559c81b616
- [v3,07/40] arm64: dts: freescale: align gpio-key node names with dtschema
(no matching commit)
- [v3,08/40] arm64: dts: freescale: align led node names with dtschema
(no matching commit)
- [v3,09/40] arm64: dts: hisilicon: align gpio-key node names with dtschema
https://git.kernel.org/soc/soc/c/111b4da2c2fc
- [v3,10/40] arm64: dts: hisilicon: correct gpio-keys properties
https://git.kernel.org/soc/soc/c/717b3096da2e
- [v3,11/40] arm64: dts: marvell: align gpio-key node names with dtschema
(no matching commit)
- [v3,12/40] arm64: dts: marvell: armada-3720: align lednode names with dtschema
(no matching commit)
- [v3,13/40] ARM: dts: marvell: align gpio-key node names with dtschema
(no matching commit)
- [v3,14/40] ARM: dts: marvell: correct gpio-keys properties
(no matching commit)
- [v3,15/40] arm64: dts: mediatek: align gpio-key node names with dtschema
(no matching commit)
- [v3,16/40] arm64: dts: mediatek: mt7622-bananapi-bpi-r64: align led node names with dtschema
(no matching commit)
- [v3,17/40] arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties
(no matching commit)
- [v3,18/40] ARM: dts: mediatek: align gpio-key node names with dtschema
(no matching commit)
- [v3,19/40] arm64: dts: tegra: align gpio-key node names with dtschema
(no matching commit)
- [v3,20/40] ARM: dts: tegra: align gpio-key node names with dtschema
(no matching commit)
- [v3,21/40] arm64: dts: qcom: align gpio-key node names with dtschema
(no matching commit)
- [v3,22/40] arm64: dts: qcom: correct gpio-keys properties
(no matching commit)
- [v3,23/40] arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keys
(no matching commit)
- [v3,24/40] arm64: dts: qcom: align led node names with dtschema
(no matching commit)
- [v3,25/40] ARM: dts: qcom: align gpio-key node names with dtschema
(no matching commit)
- [v3,26/40] arm64: dts: rockchip: align gpio-key node names with dtschema
(no matching commit)
- [v3,27/40] ARM: dts: rockchip: align gpio-key node names with dtschema
(no matching commit)
- [v3,28/40] ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties
(no matching commit)
- [v3,29/40] arm64: dts: ti: align gpio-key node names with dtschema
(no matching commit)
- [v3,30/40] arm64: dts: xilinx: align gpio-key node names with dtschema
(no matching commit)
- [v3,31/40] ARM: dts: xilinx: align gpio-key node names with dtschema
(no matching commit)
- [v3,32/40] ARM: dts: omap: align gpio-key node names with dtschema
(no matching commit)
- [v3,33/40] ARM: dts: omap: correct gpio-keys properties
(no matching commit)
- [v3,34/40] ARM: dts: animeo: align gpio-key node names with dtschema
https://git.kernel.org/soc/soc/c/523b53bb750d
- [v3,35/40] ARM: dts: animeo: correct gpio-keys properties
https://git.kernel.org/soc/soc/c/91503e5a3b5a
- [v3,36/40] ARM: dts: aspeed: align gpio-key node names with dtschema
(no matching commit)
- [v3,37/40] ARM: dts: aspeed: correct gpio-keys properties
(no matching commit)
- [v3,38/40] ARM: dts: at91: align gpio-key node names with dtschema
(no matching commit)
- [v3,39/40] ARM: dts: at91: correct gpio-keys properties
(no matching commit)
- [v3,40/40] ARM: dts: at91: drop unneeded status from gpio-keys
(no matching commit)
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
2022-06-16 0:52 ` Krzysztof Kozlowski
@ 2022-07-03 3:56 ` Bjorn Andersson
-1 siblings, 0 replies; 163+ messages in thread
From: Bjorn Andersson @ 2022-07-03 3:56 UTC (permalink / raw)
To: Krzysztof Kozlowski, Olof Johansson, soc, arm, Arnd Bergmann
Cc: Li Yang, Matthias Brugger, Sebastian Hesselbarth, Tony Lindgren,
Joel Stanley, Thierry Reding, Shawn Guo, Tero Kristo,
linux-rockchip, Russell King, Benoît Cousson,
Pengutronix Kernel Team, linux-arm-msm, linux-kernel,
Rob Herring, linux-tegra, Khuong Dinh, linux-gpio, Fabio Estevam,
Michal Simek, Vignesh Raghavendra, NXP Linux Team,
Andrew Jeffery, Heiko Stuebner, Nishanth Menon, Peter Rosin,
Sascha Hauer, linux-arm-kernel, Dmitry Torokhov, Wei Xu, openbmc,
Linus Walleij, Krzysztof Kozlowski, linux-omap, linux-input,
Nicolas Ferre, devicetree, Jonathan Neuschäfer,
Gregory Clement, Andy Gross, linux-mediatek, linux-aspeed,
Alexandre Belloni, Jonathan Hunter, Andrew Lunn, Claudiu Beznea
On Wed, 15 Jun 2022 17:52:24 -0700, Krzysztof Kozlowski wrote:
> Merging
> =======
> 1. dt-bindings: rebased on top of Rob's:
> https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
>
> 2. DTS patches are independent. They can be picked up directly by sub-arch
> maintainers, by Arnd or Olof, or eventually by me (if you wish).
>
> [...]
Applied, thanks!
[25/40] ARM: dts: qcom: align gpio-key node names with dtschema
commit: 9c17baaa97c89379cbd89e36115b7fb6aba43518
Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children
@ 2022-07-03 3:56 ` Bjorn Andersson
0 siblings, 0 replies; 163+ messages in thread
From: Bjorn Andersson @ 2022-07-03 3:56 UTC (permalink / raw)
To: Krzysztof Kozlowski, Olof Johansson, soc, arm, Arnd Bergmann
Cc: Li Yang, Matthias Brugger, Sebastian Hesselbarth, Tony Lindgren,
Joel Stanley, Thierry Reding, Shawn Guo, Tero Kristo,
linux-rockchip, Russell King, Benoît Cousson,
Pengutronix Kernel Team, linux-arm-msm, linux-kernel,
Rob Herring, linux-tegra, Khuong Dinh, linux-gpio, Fabio Estevam,
Michal Simek, Vignesh Raghavendra, NXP Linux Team,
Andrew Jeffery, Heiko Stuebner, Nishanth Menon, Peter Rosin,
Sascha Hauer, linux-arm-kernel, Dmitry Torokhov, Wei Xu, openbmc,
Linus Walleij, Krzysztof Kozlowski, linux-omap, linux-input,
Nicolas Ferre, devicetree, Jonathan Neuschäfer,
Gregory Clement, Andy Gross, linux-mediatek, linux-aspeed,
Alexandre Belloni, Jonathan Hunter, Andrew Lunn, Claudiu Beznea
On Wed, 15 Jun 2022 17:52:24 -0700, Krzysztof Kozlowski wrote:
> Merging
> =======
> 1. dt-bindings: rebased on top of Rob's:
> https://lore.kernel.org/all/20220608211207.2058487-1-robh@kernel.org/
>
> 2. DTS patches are independent. They can be picked up directly by sub-arch
> maintainers, by Arnd or Olof, or eventually by me (if you wish).
>
> [...]
Applied, thanks!
[25/40] ARM: dts: qcom: align gpio-key node names with dtschema
commit: 9c17baaa97c89379cbd89e36115b7fb6aba43518
Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 21/40] arm64: dts: qcom: align gpio-key node names with dtschema
2022-06-16 0:53 ` [PATCH v3 21/40] arm64: dts: qcom: " Krzysztof Kozlowski
2022-06-22 8:33 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
@ 2022-07-03 3:56 ` Bjorn Andersson
2 siblings, 0 replies; 163+ messages in thread
From: Bjorn Andersson @ 2022-07-03 3:56 UTC (permalink / raw)
To: Rob Herring, linux-arm-msm, linux-kernel, Krzysztof Kozlowski,
Olof Johansson, devicetree, Andy Gross, Krzysztof Kozlowski, soc,
Arnd Bergmann, arm
On Wed, 15 Jun 2022 17:53:14 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[21/40] arm64: dts: qcom: align gpio-key node names with dtschema
commit: b08f5cbd69dcd25f5ab2a0798fe3836a97a9d7c6
Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 22/40] arm64: dts: qcom: correct gpio-keys properties
2022-06-16 0:53 ` [PATCH v3 22/40] arm64: dts: qcom: correct gpio-keys properties Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
@ 2022-07-03 3:56 ` Bjorn Andersson
1 sibling, 0 replies; 163+ messages in thread
From: Bjorn Andersson @ 2022-07-03 3:56 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, linux-arm-msm, Andy Gross,
Olof Johansson, devicetree, linux-kernel, Krzysztof Kozlowski,
soc, arm, Arnd Bergmann
On Wed, 15 Jun 2022 17:53:15 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[22/40] arm64: dts: qcom: correct gpio-keys properties
commit: 5a4b0b853a2914403746b0a1decab695202ff242
Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 23/40] arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keys
2022-06-16 0:53 ` [PATCH v3 23/40] arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keys Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
@ 2022-07-03 3:56 ` Bjorn Andersson
1 sibling, 0 replies; 163+ messages in thread
From: Bjorn Andersson @ 2022-07-03 3:56 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, linux-kernel, Andy Gross,
linux-arm-msm, devicetree, Olof Johansson, Krzysztof Kozlowski,
soc, arm, Arnd Bergmann
On Wed, 15 Jun 2022 17:53:16 -0700, Krzysztof Kozlowski wrote:
> Nodes do not need explicit status=okay.
>
>
Applied, thanks!
[23/40] arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keys
commit: 9d8840f6ee426b6dfcb65bdf39e2898652e2b1e5
Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 24/40] arm64: dts: qcom: align led node names with dtschema
2022-06-16 0:53 ` [PATCH v3 24/40] arm64: dts: qcom: align led node names with dtschema Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
@ 2022-07-03 3:56 ` Bjorn Andersson
1 sibling, 0 replies; 163+ messages in thread
From: Bjorn Andersson @ 2022-07-03 3:56 UTC (permalink / raw)
To: Rob Herring, Andy Gross, Krzysztof Kozlowski, linux-kernel,
Olof Johansson, devicetree, linux-arm-msm, Krzysztof Kozlowski,
soc, Arnd Bergmann, arm
On Wed, 15 Jun 2022 17:53:17 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> with 'led'.
>
>
Applied, thanks!
[24/40] arm64: dts: qcom: align led node names with dtschema
commit: 3cfe94d660a8ebc19e78ea0a4781d7e9a1054c65
Best regards,
--
Bjorn Andersson <bjorn.andersson@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 01/40] dt-bindings: input: gpio-keys: enforce node names to match all properties
2022-06-27 8:17 ` Krzysztof Kozlowski
@ 2022-07-05 11:39 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-07-05 11:39 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: soc, linux-kernel, Olof Johansson, devicetree, Arnd Bergmann,
Krzysztof Kozlowski, Rob Herring, arm, linux-input, Rob Herring
On 27/06/2022 10:17, Krzysztof Kozlowski wrote:
> On 16/06/2022 02:52, Krzysztof Kozlowski wrote:
>> The gpio-keys DT schema matches all properties with a wide pattern and
>> applies specific schema to children. This has drawback - all regular
>> properties are also matched and are silently ignored, even if they are
>> not described in schema. Basically this allows any non-object property
>> to be present.
>>
>> Enforce specific naming pattern for children (keys) to narrow the
>> pattern thus do not match other properties. This will require all
>> children to be properly prefixed or suffixed (button, event, switch or
>> key).
>>
>> Removal of "if:" within patternProperties causes drop of one indentation
>> level, but there are no other changes in the affected block.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> ---
>> .../devicetree/bindings/input/gpio-keys.yaml | 157 +++++++++---------
>> 1 file changed, 77 insertions(+), 80 deletions(-)
>>
>
> Dmitry,
>
> Any comments from your side? Are you planning to pick up the dt-bindings
> here (patch 1-3)?
Hmmm, I guess this should go via dt-bindings then...
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 36/40] ARM: dts: aspeed: align gpio-key node names with dtschema
2022-06-27 8:49 ` Krzysztof Kozlowski
@ 2022-07-05 11:42 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-07-05 11:42 UTC (permalink / raw)
To: Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery
Cc: soc, arm, linux-arm-kernel, linux-kernel, Arnd Bergmann,
linux-aspeed, devicetree, Olof Johansson, Rob Herring
On 27/06/2022 10:49, Krzysztof Kozlowski wrote:
> On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
>> The node names should be generic and DT schema expects certain pattern
>> (e.g. with key/button/switch).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>> .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 30 ++++++------
>> .../boot/dts/aspeed-bmc-bytedance-g220a.dts | 48 +++++++++----------
>> arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 8 ++--
>> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 12 ++---
>> .../boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 22 ++++-----
>> arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 23 ++++-----
>> arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 20 ++++----
>> arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 2 +-
>> arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
>> arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 2 +-
>> arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 30 ++++++------
>> arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 12 ++---
>> arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 4 +-
>> .../boot/dts/aspeed-bmc-opp-witherspoon.dts | 16 +++----
>> arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 4 +-
>> 15 files changed, 118 insertions(+), 117 deletions(-)
>>
>
> Joel,
>
> Any comments on the Aspeed patches? Do you intend to take them or shall
> I handle them with the rest?
These are still not in next and still not response here, so I'll pick
them up.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: [PATCH v3 36/40] ARM: dts: aspeed: align gpio-key node names with dtschema
@ 2022-07-05 11:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-07-05 11:42 UTC (permalink / raw)
To: Krzysztof Kozlowski, Joel Stanley, Andrew Jeffery
Cc: soc, arm, linux-arm-kernel, linux-kernel, Arnd Bergmann,
linux-aspeed, devicetree, Olof Johansson, Rob Herring
On 27/06/2022 10:49, Krzysztof Kozlowski wrote:
> On 16/06/2022 02:53, Krzysztof Kozlowski wrote:
>> The node names should be generic and DT schema expects certain pattern
>> (e.g. with key/button/switch).
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>> .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 30 ++++++------
>> .../boot/dts/aspeed-bmc-bytedance-g220a.dts | 48 +++++++++----------
>> arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 8 ++--
>> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 12 ++---
>> .../boot/dts/aspeed-bmc-inspur-fp5280g2.dts | 22 ++++-----
>> arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 23 ++++-----
>> arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts | 20 ++++----
>> arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 2 +-
>> arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 2 +-
>> arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 2 +-
>> arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 30 ++++++------
>> arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 12 ++---
>> arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts | 4 +-
>> .../boot/dts/aspeed-bmc-opp-witherspoon.dts | 16 +++----
>> arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 4 +-
>> 15 files changed, 118 insertions(+), 117 deletions(-)
>>
>
> Joel,
>
> Any comments on the Aspeed patches? Do you intend to take them or shall
> I handle them with the rest?
These are still not in next and still not response here, so I'll pick
them up.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 36/40] ARM: dts: aspeed: align gpio-key node names with dtschema
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-07-05 11:45 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-07-05 11:45 UTC (permalink / raw)
To: olof, krzysztof.kozlowski, arm, andrew, soc, joel, Arnd Bergmann,
linux-kernel, robh+dt, linux-arm-kernel, linux-aspeed,
krzysztof.kozlowski+dt, devicetree
On Wed, 15 Jun 2022 17:53:29 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[36/40] ARM: dts: aspeed: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/7bd809eee4290ae7277f4fb20f270fcedd74737b
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 36/40] ARM: dts: aspeed: align gpio-key node names with dtschema
@ 2022-07-05 11:45 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-07-05 11:45 UTC (permalink / raw)
To: olof, krzysztof.kozlowski, arm, andrew, soc, joel, Arnd Bergmann,
linux-kernel, robh+dt, linux-arm-kernel, linux-aspeed,
krzysztof.kozlowski+dt, devicetree
On Wed, 15 Jun 2022 17:53:29 -0700, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
>
>
Applied, thanks!
[36/40] ARM: dts: aspeed: align gpio-key node names with dtschema
https://git.kernel.org/krzk/linux/c/7bd809eee4290ae7277f4fb20f270fcedd74737b
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 37/40] ARM: dts: aspeed: correct gpio-keys properties
2022-06-16 0:53 ` Krzysztof Kozlowski
@ 2022-07-05 11:45 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-07-05 11:45 UTC (permalink / raw)
To: olof, krzysztof.kozlowski, arm, andrew, soc, joel, Arnd Bergmann,
linux-kernel, robh+dt, linux-arm-kernel, linux-aspeed,
krzysztof.kozlowski+dt, devicetree
On Wed, 15 Jun 2022 17:53:30 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[37/40] ARM: dts: aspeed: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/bafd5bb5ea496c8fc443e6b9de70af840bec0b9c
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
^ permalink raw reply [flat|nested] 163+ messages in thread
* Re: (subset) [PATCH v3 37/40] ARM: dts: aspeed: correct gpio-keys properties
@ 2022-07-05 11:45 ` Krzysztof Kozlowski
0 siblings, 0 replies; 163+ messages in thread
From: Krzysztof Kozlowski @ 2022-07-05 11:45 UTC (permalink / raw)
To: olof, krzysztof.kozlowski, arm, andrew, soc, joel, Arnd Bergmann,
linux-kernel, robh+dt, linux-arm-kernel, linux-aspeed,
krzysztof.kozlowski+dt, devicetree
On Wed, 15 Jun 2022 17:53:30 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
>
>
Applied, thanks!
[37/40] ARM: dts: aspeed: correct gpio-keys properties
https://git.kernel.org/krzk/linux/c/bafd5bb5ea496c8fc443e6b9de70af840bec0b9c
Best regards,
--
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 163+ messages in thread
end of thread, other threads:[~2022-07-05 11:46 UTC | newest]
Thread overview: 163+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-16 0:52 [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children Krzysztof Kozlowski
2022-06-16 0:52 ` Krzysztof Kozlowski
2022-06-16 0:52 ` Krzysztof Kozlowski
2022-06-16 0:52 ` [PATCH v3 01/40] dt-bindings: input: gpio-keys: enforce node names to match all properties Krzysztof Kozlowski
2022-06-27 8:17 ` Krzysztof Kozlowski
2022-07-05 11:39 ` Krzysztof Kozlowski
2022-06-16 0:52 ` [PATCH v3 02/40] dt-bindings: input: gpio-keys: reference input.yaml and document properties Krzysztof Kozlowski
2022-06-16 0:52 ` [PATCH v3 03/40] dt-bindings: input: gpio-keys: accept also interrupt-extended Krzysztof Kozlowski
2022-06-16 0:52 ` [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name Krzysztof Kozlowski
2022-06-25 23:28 ` Linus Walleij
2022-06-25 23:28 ` Linus Walleij
2022-06-26 10:28 ` Krzysztof Kozlowski
2022-06-26 10:28 ` Krzysztof Kozlowski
2022-06-27 22:18 ` Rob Herring
2022-06-27 22:18 ` Rob Herring
2022-06-28 19:26 ` Linus Walleij
2022-06-28 19:26 ` Linus Walleij
2022-06-16 0:52 ` [PATCH v3 05/40] arm64: dts: apm: correct gpio-keys properties Krzysztof Kozlowski
2022-06-20 11:14 ` (subset) " Krzysztof Kozlowski
2022-06-16 0:52 ` [PATCH v3 06/40] arm64: dts: broadcom: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-20 11:14 ` (subset) " Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 07/40] arm64: dts: freescale: " Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 08/40] arm64: dts: freescale: align led " Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 09/40] arm64: dts: hisilicon: align gpio-key " Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-20 11:14 ` (subset) " Krzysztof Kozlowski
2022-06-20 11:14 ` Krzysztof Kozlowski
2022-06-21 2:29 ` Wei Xu
2022-06-21 2:29 ` Wei Xu
2022-06-16 0:53 ` [PATCH v3 10/40] arm64: dts: hisilicon: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-20 11:14 ` (subset) " Krzysztof Kozlowski
2022-06-20 11:14 ` Krzysztof Kozlowski
2022-06-21 2:28 ` Wei Xu
2022-06-21 2:28 ` Wei Xu
2022-06-16 0:53 ` [PATCH v3 11/40] arm64: dts: marvell: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-22 8:32 ` Krzysztof Kozlowski
2022-06-22 8:32 ` Krzysztof Kozlowski
2022-06-27 8:42 ` Krzysztof Kozlowski
2022-06-27 8:42 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-06-27 9:15 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 12/40] arm64: dts: marvell: armada-3720: align lednode " Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-06-27 9:15 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 13/40] ARM: dts: marvell: align gpio-key node " Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-06-27 9:15 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 14/40] ARM: dts: marvell: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-06-27 9:15 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 15/40] arm64: dts: mediatek: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-17 10:43 ` Matthias Brugger
2022-06-17 10:43 ` Matthias Brugger
2022-06-16 0:53 ` [PATCH v3 16/40] arm64: dts: mediatek: mt7622-bananapi-bpi-r64: align led " Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-17 10:43 ` Matthias Brugger
2022-06-17 10:43 ` Matthias Brugger
2022-06-16 0:53 ` [PATCH v3 17/40] arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-17 10:41 ` Matthias Brugger
2022-06-17 10:41 ` Matthias Brugger
2022-06-17 23:18 ` Krzysztof Kozlowski
2022-06-17 23:18 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 18/40] ARM: dts: mediatek: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-17 10:44 ` Matthias Brugger
2022-06-17 10:44 ` Matthias Brugger
2022-06-16 0:53 ` [PATCH v3 19/40] arm64: dts: tegra: " Krzysztof Kozlowski
2022-06-24 16:08 ` Thierry Reding
2022-06-24 16:09 ` Krzysztof Kozlowski
2022-06-27 8:45 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 20/40] ARM: " Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 21/40] arm64: dts: qcom: " Krzysztof Kozlowski
2022-06-22 8:33 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
2022-06-16 0:53 ` [PATCH v3 22/40] arm64: dts: qcom: correct gpio-keys properties Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
2022-06-16 0:53 ` [PATCH v3 23/40] arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keys Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
2022-06-16 0:53 ` [PATCH v3 24/40] arm64: dts: qcom: align led node names with dtschema Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-07-03 3:56 ` Bjorn Andersson
2022-06-16 0:53 ` [PATCH v3 25/40] ARM: dts: qcom: align gpio-key " Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 26/40] arm64: dts: rockchip: " Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-22 8:34 ` Krzysztof Kozlowski
2022-06-22 8:34 ` Krzysztof Kozlowski
2022-06-22 8:34 ` Krzysztof Kozlowski
2022-06-22 12:52 ` Heiko Stuebner
2022-06-22 12:52 ` Heiko Stuebner
2022-06-22 12:52 ` Heiko Stuebner
2022-06-16 0:53 ` [PATCH v3 27/40] ARM: " Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 28/40] ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 29/40] arm64: dts: ti: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 30/40] arm64: dts: xilinx: " Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-23 8:10 ` Michal Simek
2022-06-23 8:10 ` Michal Simek
2022-06-16 0:53 ` [PATCH v3 31/40] ARM: " Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-23 8:10 ` Michal Simek
2022-06-23 8:10 ` Michal Simek
2022-06-16 0:53 ` [PATCH v3 32/40] ARM: dts: omap: " Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 33/40] ARM: dts: omap: correct gpio-keys properties Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 34/40] ARM: dts: animeo: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-20 11:14 ` (subset) " Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 35/40] ARM: dts: animeo: correct gpio-keys properties Krzysztof Kozlowski
2022-06-20 11:14 ` (subset) " Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 36/40] ARM: dts: aspeed: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 8:49 ` Krzysztof Kozlowski
2022-06-27 8:49 ` Krzysztof Kozlowski
2022-07-05 11:42 ` Krzysztof Kozlowski
2022-07-05 11:42 ` Krzysztof Kozlowski
2022-07-05 11:45 ` (subset) " Krzysztof Kozlowski
2022-07-05 11:45 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 37/40] ARM: dts: aspeed: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-07-05 11:45 ` (subset) " Krzysztof Kozlowski
2022-07-05 11:45 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 38/40] ARM: dts: at91: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-16 7:41 ` Claudiu.Beznea
2022-06-16 7:41 ` Claudiu.Beznea
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-06-27 9:15 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 39/40] ARM: dts: at91: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 9:15 ` (subset) " Krzysztof Kozlowski
2022-06-27 9:15 ` Krzysztof Kozlowski
2022-06-16 0:53 ` [PATCH v3 40/40] ARM: dts: at91: drop unneeded status from gpio-keys Krzysztof Kozlowski
2022-06-16 0:53 ` Krzysztof Kozlowski
2022-06-27 9:16 ` (subset) " Krzysztof Kozlowski
2022-06-27 9:16 ` Krzysztof Kozlowski
2022-06-18 3:02 ` (subset) [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children Nishanth Menon
2022-06-18 3:02 ` Nishanth Menon
2022-06-18 3:02 ` Nishanth Menon
2022-06-22 19:47 ` Heiko Stuebner
2022-06-22 19:47 ` Heiko Stuebner
2022-06-22 19:47 ` Heiko Stuebner
2022-07-01 20:41 ` patchwork-bot+linux-soc
2022-07-03 3:56 ` (subset) " Bjorn Andersson
2022-07-03 3:56 ` Bjorn Andersson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.