[ath9k-devel] Transmitter Independent of Receiver

[ath9k-devel] Transmitter Independent of Receiver

[J. C. Jones]

Hi All,

I searched in vain for real data sheets (as you all know) for "typical"
Wi-Fi chips to determine which designs permit simultaneous, independent
transmission and reception. For example, the transmitter would be
transmitting at 1mbps on Channel 1, while receiver would be receiving at
11mbps on Channel 11. Does any Atheros architecture allow this? And other
vendors?

TIA,

-Wabbit-

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120426/48eec9cc/attachment-0001.htm 

[ath9k-devel] Transmitter Independent of Receiver

[Mohammed Shafi]

On Thu, Apr 26, 2012 at 11:00 AM, J. C. Jones <jaibuduvin@gmail.com> wrote:
> Hi All,
>
> I searched in vain for real data sheets (as you all know) for ?typical?
> Wi-Fi chips to determine which designs permit simultaneous, independent
> transmission and reception. For example, the transmitter would be
> transmitting at 1mbps on Channel 1, while receiver would be receiving at
> 11mbps on Channel 11. Does any Atheros architecture allow this? And other
> vendors?

no. not sure if there is something. some time between tx and rx thats
what i heard

>
> TIA,
>
> -Wabbit-
>
>
> _______________________________________________
> ath9k-devel mailing list
> ath9k-devel at lists.ath9k.org
> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>



-- 
thanks,
shafi

[ath9k-devel] Transmitter Independent of Receiver

[Adrian Chadd]

No, there's one radio and it's tuned for both TX and RX.



adrian

[ath9k-devel] Transmitter Independent of Receiver

[Daniel Smith]

On Thu, Apr 26, 2012 at 1:30 AM, J. C. Jones <jaibuduvin@gmail.com> wrote:
> Hi All,
>
> I searched in vain for real data sheets (as you all know) for ?typical?
> Wi-Fi chips to determine which designs permit simultaneous, independent
> transmission and reception. For example, the transmitter would be
> transmitting at 1mbps on Channel 1, while receiver would be receiving at
> 11mbps on Channel 11. Does any Atheros architecture allow this? And other
> vendors?

You may want to take a look at RedPine Signal's Maxi-Fi? BEAM450?
(http://redpinesignals.com/Products/Chipsets/beam450.html). Claims to
be a 3x3:3 dual band that you can split into a simultaneous 2x2:2 and
1x1:1.

v/r
Daniel Smith