* [PATCH v2 0/3] Add clock binding id for rk3288
@ 2014-09-24 15:33 ` Kever Yang
0 siblings, 0 replies; 16+ messages in thread
From: Kever Yang @ 2014-09-24 15:33 UTC (permalink / raw)
To: heiko, Mike Turquette
Cc: dianders, sonnyrao, addy.ke, cf, xjq, hj, huangtao,
linux-rockchip, Kever Yang, devicetree, Kumar Gala, linux-kernel,
Ian Campbell, Rob Herring, Pawel Moll, Mark Rutland,
linux-arm-kernel
This patch add some clock binding id for different modules
that under development and going to send upstream.
This patch also add the clock node in PD_VIDEO.
Changes in v2:
- split into two patches of add clock node in PD_VIDEO and
use new defined clock ID
Kever Yang (3):
clk: rockchip: add some needed clock binding id for rk3288
clk: rockchip: use the clock id for nodes init
clk: rockchip: add clock node in PD_VIDEO
drivers/clk/rockchip/clk-rk3288.c | 79 +++++++++++++++++++---------------
include/dt-bindings/clock/rk3288-cru.h | 38 +++++++++++++++-
2 files changed, 82 insertions(+), 35 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 0/3] Add clock binding id for rk3288
@ 2014-09-24 15:33 ` Kever Yang
0 siblings, 0 replies; 16+ messages in thread
From: Kever Yang @ 2014-09-24 15:33 UTC (permalink / raw)
To: heiko-4mtYJXux2i+zQB+pC5nmwQ, Mike Turquette
Cc: dianders-F7+t8E8rja9g9hUCZPvPmw, sonnyrao-F7+t8E8rja9g9hUCZPvPmw,
addy.ke-TNX95d0MmH7DzftRWevZcw, cf-TNX95d0MmH7DzftRWevZcw,
xjq-TNX95d0MmH7DzftRWevZcw, hj-TNX95d0MmH7DzftRWevZcw,
huangtao-TNX95d0MmH7DzftRWevZcw,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Kever Yang,
devicetree-u79uwXL29TY76Z2rM5mHXA, Kumar Gala,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Ian Campbell, Rob Herring,
Pawel Moll, Mark Rutland,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
This patch add some clock binding id for different modules
that under development and going to send upstream.
This patch also add the clock node in PD_VIDEO.
Changes in v2:
- split into two patches of add clock node in PD_VIDEO and
use new defined clock ID
Kever Yang (3):
clk: rockchip: add some needed clock binding id for rk3288
clk: rockchip: use the clock id for nodes init
clk: rockchip: add clock node in PD_VIDEO
drivers/clk/rockchip/clk-rk3288.c | 79 +++++++++++++++++++---------------
include/dt-bindings/clock/rk3288-cru.h | 38 +++++++++++++++-
2 files changed, 82 insertions(+), 35 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 0/3] Add clock binding id for rk3288
@ 2014-09-24 15:33 ` Kever Yang
0 siblings, 0 replies; 16+ messages in thread
From: Kever Yang @ 2014-09-24 15:33 UTC (permalink / raw)
To: linux-arm-kernel
This patch add some clock binding id for different modules
that under development and going to send upstream.
This patch also add the clock node in PD_VIDEO.
Changes in v2:
- split into two patches of add clock node in PD_VIDEO and
use new defined clock ID
Kever Yang (3):
clk: rockchip: add some needed clock binding id for rk3288
clk: rockchip: use the clock id for nodes init
clk: rockchip: add clock node in PD_VIDEO
drivers/clk/rockchip/clk-rk3288.c | 79 +++++++++++++++++++---------------
include/dt-bindings/clock/rk3288-cru.h | 38 +++++++++++++++-
2 files changed, 82 insertions(+), 35 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 1/3] clk: rockchip: add some needed clock binding id for rk3288
2014-09-24 15:33 ` Kever Yang
(?)
(?)
@ 2014-09-24 15:33 ` Kever Yang
2014-09-24 17:56 ` Doug Anderson
-1 siblings, 1 reply; 16+ messages in thread
From: Kever Yang @ 2014-09-24 15:33 UTC (permalink / raw)
To: heiko, Mike Turquette
Cc: dianders, sonnyrao, addy.ke, cf, xjq, hj, huangtao,
linux-rockchip, Kever Yang, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, devicetree, linux-kernel
This patch add some clock binding id for different modules
that under development and going to send upstream.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---
Changes in v2: None
include/dt-bindings/clock/rk3288-cru.h | 38 +++++++++++++++++++++++++++++++++-
1 file changed, 37 insertions(+), 1 deletion(-)
diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
index ebcb460..ee579ff 100644
--- a/include/dt-bindings/clock/rk3288-cru.h
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -61,6 +61,15 @@
#define SCLK_LCDC_PWM1 101
#define SCLK_MAC_RX 102
#define SCLK_MAC_TX 103
+#define SCLK_EDP_24M 104
+#define SCLK_EDP 105
+#define SCLK_RGA 106
+#define SCLK_ISP 107
+#define SCLK_ISP_JPE 108
+#define SCLK_HDMI_HDCP 109
+#define SCLK_HDMI_CEC 110
+#define SCLK_HEVC_CABAC 111
+#define SCLK_HEVC_CORE 112
#define DCLK_VOP0 190
#define DCLK_VOP1 191
@@ -75,6 +84,16 @@
#define ACLK_VOP1 198
#define ACLK_CRYPTO 199
#define ACLK_RGA 200
+#define ACLK_RGA_NIU 201
+#define ACLK_IEP 202
+#define ACLK_VIO0_NIU 203
+#define ACLK_VIP 204
+#define ACLK_ISP 205
+#define ACLK_VIO1_NIU 206
+#define ACLK_HEVC 207
+#define ACLK_VCODEC 208
+#define ACLK_CPU 209
+#define ACLK_PERI 210
/* pclk gates */
#define PCLK_GPIO0 320
@@ -112,6 +131,15 @@
#define PCLK_PS2C 352
#define PCLK_TIMER 353
#define PCLK_TZPC 354
+#define PCLK_EDP_CTRL 355
+#define PCLK_MIPI_DSI0 356
+#define PCLK_MIPI_DSI1 357
+#define PCLK_MIPI_CSI 358
+#define PCLK_LVDS_PHY 359
+#define PCLK_HDMI_CTRL 360
+#define PCLK_VIO2_H2P 361
+#define PCLK_CPU 362
+#define PCLK_PERI 363
/* hclk gates */
#define HCLK_GPS 448
@@ -137,8 +165,16 @@
#define HCLK_IEP 468
#define HCLK_ISP 469
#define HCLK_RGA 470
+#define HCLK_VIO_AHB_ARBI 471
+#define HCLK_VIO_NIU 472
+#define HCLK_VIP 473
+#define HCLK_VIO2_H2P 474
+#define HCLK_HEVC 475
+#define HCLK_VCODEC 476
+#define HCLK_CPU 477
+#define HCLK_PERI 478
-#define CLK_NR_CLKS (HCLK_RGA + 1)
+#define CLK_NR_CLKS (HCLK_PERI + 1)
/* soft-reset indices */
#define SRST_CORE0 0
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 2/3] clk: rockchip: use the clock id for nodes init
2014-09-24 15:33 ` Kever Yang
@ 2014-09-24 15:33 ` Kever Yang
-1 siblings, 0 replies; 16+ messages in thread
From: Kever Yang @ 2014-09-24 15:33 UTC (permalink / raw)
To: heiko, Mike Turquette
Cc: dianders, sonnyrao, addy.ke, cf, xjq, hj, huangtao,
linux-rockchip, Kever Yang, linux-arm-kernel, linux-kernel
This patch use the new defined clock ID to initial the clock nodes.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---
Changes in v2:
- split into two patches of add clock node in PD_VIDEO and
use new defined clock ID
drivers/clk/rockchip/clk-rk3288.c | 68 +++++++++++++++++++--------------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 8ea885b..d691a56 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -219,12 +219,12 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
RK3288_CLKSEL_CON(1), 15, 1, MFLAGS, 3, 5, DFLAGS),
DIV(0, "aclk_cpu_pre", "aclk_cpu_src", 0,
RK3288_CLKSEL_CON(1), 0, 3, DFLAGS),
- GATE(0, "aclk_cpu", "aclk_cpu_pre", 0,
+ GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_pre", 0,
RK3288_CLKGATE_CON(0), 3, GFLAGS),
- COMPOSITE_NOMUX(0, "pclk_cpu", "aclk_cpu_pre", 0,
+ COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_pre", 0,
RK3288_CLKSEL_CON(1), 12, 3, DFLAGS,
RK3288_CLKGATE_CON(0), 5, GFLAGS),
- COMPOSITE_NOMUX_DIVTBL(0, "hclk_cpu", "aclk_cpu_pre", 0,
+ COMPOSITE_NOMUX_DIVTBL(HCLK_CPU, "hclk_cpu", "aclk_cpu_pre", 0,
RK3288_CLKSEL_CON(1), 8, 2, DFLAGS, div_hclk_cpu_t,
RK3288_CLKGATE_CON(0), 4, GFLAGS),
GATE(0, "c2c_host", "aclk_cpu_src", 0,
@@ -309,7 +309,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
COMPOSITE(0, "aclk_rga_pre", mux_pll_src_cpll_gpll_usb480m_p, 0,
RK3288_CLKSEL_CON(30), 6, 2, MFLAGS, 0, 5, DFLAGS,
RK3288_CLKGATE_CON(3), 5, GFLAGS),
- COMPOSITE(0, "sclk_rga", mux_pll_src_cpll_gpll_usb480m_p, 0,
+ COMPOSITE(SCLK_RGA, "sclk_rga", mux_pll_src_cpll_gpll_usb480m_p, 0,
RK3288_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(3), 4, GFLAGS),
@@ -320,35 +320,35 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
RK3288_CLKSEL_CON(29), 6, 2, MFLAGS, 8, 8, DFLAGS,
RK3288_CLKGATE_CON(3), 3, GFLAGS),
- COMPOSITE_NODIV(0, "sclk_edp_24m", mux_edp_24m_p, 0,
+ COMPOSITE_NODIV(SCLK_EDP_24M, "sclk_edp_24m", mux_edp_24m_p, 0,
RK3288_CLKSEL_CON(28), 15, 1, MFLAGS,
RK3288_CLKGATE_CON(3), 12, GFLAGS),
- COMPOSITE(0, "sclk_edp", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_EDP, "sclk_edp", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 6, DFLAGS,
RK3288_CLKGATE_CON(3), 13, GFLAGS),
- COMPOSITE(0, "sclk_isp", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_ISP, "sclk_isp", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(6), 6, 2, MFLAGS, 0, 6, DFLAGS,
RK3288_CLKGATE_CON(3), 14, GFLAGS),
- COMPOSITE(0, "sclk_isp_jpe", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_ISP_JPE, "sclk_isp_jpe", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(6), 14, 2, MFLAGS, 8, 6, DFLAGS,
RK3288_CLKGATE_CON(3), 15, GFLAGS),
- GATE(0, "sclk_hdmi_hdcp", "xin24m", 0,
+ GATE(SCLK_HDMI_HDCP, "sclk_hdmi_hdcp", "xin24m", 0,
RK3288_CLKGATE_CON(5), 12, GFLAGS),
- GATE(0, "sclk_hdmi_cec", "xin32k", 0,
+ GATE(SCLK_HDMI_CEC, "sclk_hdmi_cec", "xin32k", 0,
RK3288_CLKGATE_CON(5), 11, GFLAGS),
- COMPOSITE(0, "aclk_hevc", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(ACLK_HEVC, "aclk_hevc", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(39), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(13), 13, GFLAGS),
- DIV(0, "hclk_hevc", "aclk_hevc", 0,
+ DIV(HCLK_HEVC, "hclk_hevc", "aclk_hevc", 0,
RK3288_CLKSEL_CON(40), 12, 2, DFLAGS),
- COMPOSITE(0, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_HEVC_CABAC, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(42), 6, 2, MFLAGS, 0, 5, DFLAGS,
RK3288_CLKGATE_CON(13), 14, GFLAGS),
- COMPOSITE(0, "sclk_hevc_core", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_HEVC_CORE, "sclk_hevc_core", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(42), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(13), 15, GFLAGS),
@@ -371,13 +371,13 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
COMPOSITE(0, "aclk_peri_src", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(10), 15, 1, MFLAGS, 0, 5, DFLAGS,
RK3288_CLKGATE_CON(2), 0, GFLAGS),
- COMPOSITE_NOMUX(0, "pclk_peri", "aclk_peri_src", 0,
+ COMPOSITE_NOMUX(PCLK_PERI, "pclk_peri", "aclk_peri_src", 0,
RK3288_CLKSEL_CON(10), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
RK3288_CLKGATE_CON(2), 3, GFLAGS),
- COMPOSITE_NOMUX(0, "hclk_peri", "aclk_peri_src", 0,
+ COMPOSITE_NOMUX(HCLK_PERI, "hclk_peri", "aclk_peri_src", 0,
RK3288_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
RK3288_CLKGATE_CON(2), 2, GFLAGS),
- GATE(0, "aclk_peri", "aclk_peri_src", 0,
+ GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0,
RK3288_CLKGATE_CON(2), 1, GFLAGS),
/*
@@ -643,34 +643,34 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
GATE(HCLK_RGA, "hclk_rga", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 1, GFLAGS),
GATE(HCLK_VOP0, "hclk_vop0", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 6, GFLAGS),
GATE(HCLK_VOP1, "hclk_vop1", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 8, GFLAGS),
- GATE(0, "hclk_vio_ahb_arbi", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 9, GFLAGS),
- GATE(0, "hclk_vio_niu", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 10, GFLAGS),
- GATE(0, "hclk_vip", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 15, GFLAGS),
+ GATE(HCLK_VIO_AHB_ARBI, "hclk_vio_ahb_arbi", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 9, GFLAGS),
+ GATE(HCLK_VIO_NIU, "hclk_vio_niu", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 10, GFLAGS),
+ GATE(HCLK_VIP, "hclk_vip", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 15, GFLAGS),
GATE(HCLK_IEP, "hclk_iep", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 3, GFLAGS),
GATE(HCLK_ISP, "hclk_isp", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 1, GFLAGS),
- GATE(0, "hclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 10, GFLAGS),
- GATE(0, "pclk_mipi_dsi0", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 4, GFLAGS),
- GATE(0, "pclk_mipi_dsi1", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 5, GFLAGS),
- GATE(0, "pclk_mipi_csi", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 6, GFLAGS),
- GATE(0, "pclk_lvds_phy", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 7, GFLAGS),
- GATE(0, "pclk_edp_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 8, GFLAGS),
- GATE(0, "pclk_hdmi_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 9, GFLAGS),
- GATE(0, "pclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 11, GFLAGS),
+ GATE(HCLK_VIO2_H2P, "hclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 10, GFLAGS),
+ GATE(PCLK_MIPI_DSI0, "pclk_mipi_dsi0", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 4, GFLAGS),
+ GATE(PCLK_MIPI_DSI1, "pclk_mipi_dsi1", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 5, GFLAGS),
+ GATE(PCLK_MIPI_CSI, "pclk_mipi_csi", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 6, GFLAGS),
+ GATE(PCLK_LVDS_PHY, "pclk_lvds_phy", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 7, GFLAGS),
+ GATE(PCLK_EDP_CTRL, "pclk_edp_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 8, GFLAGS),
+ GATE(PCLK_HDMI_CTRL, "pclk_hdmi_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 9, GFLAGS),
+ GATE(PCLK_VIO2_H2P, "pclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 11, GFLAGS),
/* aclk_vio0 gates */
GATE(ACLK_VOP0, "aclk_vop0", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 5, GFLAGS),
- GATE(0, "aclk_iep", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 2, GFLAGS),
- GATE(0, "aclk_vio0_niu", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 11, GFLAGS),
- GATE(0, "aclk_vip", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 14, GFLAGS),
+ GATE(ACLK_IEP, "aclk_iep", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 2, GFLAGS),
+ GATE(ACLK_VIO0_NIU, "aclk_vio0_niu", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 11, GFLAGS),
+ GATE(ACLK_VIP, "aclk_vip", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 14, GFLAGS),
/* aclk_vio1 gates */
GATE(ACLK_VOP1, "aclk_vop1", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 7, GFLAGS),
- GATE(0, "aclk_isp", "aclk_vio1", 0, RK3288_CLKGATE_CON(16), 2, GFLAGS),
- GATE(0, "aclk_vio1_niu", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 12, GFLAGS),
+ GATE(ACLK_ISP, "aclk_isp", "aclk_vio1", 0, RK3288_CLKGATE_CON(16), 2, GFLAGS),
+ GATE(ACLK_VIO1_NIU, "aclk_vio1_niu", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 12, GFLAGS),
/* aclk_rga_pre gates */
GATE(ACLK_RGA, "aclk_rga", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 0, GFLAGS),
- GATE(0, "aclk_rga_niu", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 13, GFLAGS),
+ GATE(ACLK_RGA_NIU, "aclk_rga_niu", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 13, GFLAGS),
/*
* Other ungrouped clocks.
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 2/3] clk: rockchip: use the clock id for nodes init
@ 2014-09-24 15:33 ` Kever Yang
0 siblings, 0 replies; 16+ messages in thread
From: Kever Yang @ 2014-09-24 15:33 UTC (permalink / raw)
To: linux-arm-kernel
This patch use the new defined clock ID to initial the clock nodes.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---
Changes in v2:
- split into two patches of add clock node in PD_VIDEO and
use new defined clock ID
drivers/clk/rockchip/clk-rk3288.c | 68 +++++++++++++++++++--------------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 8ea885b..d691a56 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -219,12 +219,12 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
RK3288_CLKSEL_CON(1), 15, 1, MFLAGS, 3, 5, DFLAGS),
DIV(0, "aclk_cpu_pre", "aclk_cpu_src", 0,
RK3288_CLKSEL_CON(1), 0, 3, DFLAGS),
- GATE(0, "aclk_cpu", "aclk_cpu_pre", 0,
+ GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_pre", 0,
RK3288_CLKGATE_CON(0), 3, GFLAGS),
- COMPOSITE_NOMUX(0, "pclk_cpu", "aclk_cpu_pre", 0,
+ COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_pre", 0,
RK3288_CLKSEL_CON(1), 12, 3, DFLAGS,
RK3288_CLKGATE_CON(0), 5, GFLAGS),
- COMPOSITE_NOMUX_DIVTBL(0, "hclk_cpu", "aclk_cpu_pre", 0,
+ COMPOSITE_NOMUX_DIVTBL(HCLK_CPU, "hclk_cpu", "aclk_cpu_pre", 0,
RK3288_CLKSEL_CON(1), 8, 2, DFLAGS, div_hclk_cpu_t,
RK3288_CLKGATE_CON(0), 4, GFLAGS),
GATE(0, "c2c_host", "aclk_cpu_src", 0,
@@ -309,7 +309,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
COMPOSITE(0, "aclk_rga_pre", mux_pll_src_cpll_gpll_usb480m_p, 0,
RK3288_CLKSEL_CON(30), 6, 2, MFLAGS, 0, 5, DFLAGS,
RK3288_CLKGATE_CON(3), 5, GFLAGS),
- COMPOSITE(0, "sclk_rga", mux_pll_src_cpll_gpll_usb480m_p, 0,
+ COMPOSITE(SCLK_RGA, "sclk_rga", mux_pll_src_cpll_gpll_usb480m_p, 0,
RK3288_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(3), 4, GFLAGS),
@@ -320,35 +320,35 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
RK3288_CLKSEL_CON(29), 6, 2, MFLAGS, 8, 8, DFLAGS,
RK3288_CLKGATE_CON(3), 3, GFLAGS),
- COMPOSITE_NODIV(0, "sclk_edp_24m", mux_edp_24m_p, 0,
+ COMPOSITE_NODIV(SCLK_EDP_24M, "sclk_edp_24m", mux_edp_24m_p, 0,
RK3288_CLKSEL_CON(28), 15, 1, MFLAGS,
RK3288_CLKGATE_CON(3), 12, GFLAGS),
- COMPOSITE(0, "sclk_edp", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_EDP, "sclk_edp", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 6, DFLAGS,
RK3288_CLKGATE_CON(3), 13, GFLAGS),
- COMPOSITE(0, "sclk_isp", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_ISP, "sclk_isp", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(6), 6, 2, MFLAGS, 0, 6, DFLAGS,
RK3288_CLKGATE_CON(3), 14, GFLAGS),
- COMPOSITE(0, "sclk_isp_jpe", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_ISP_JPE, "sclk_isp_jpe", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(6), 14, 2, MFLAGS, 8, 6, DFLAGS,
RK3288_CLKGATE_CON(3), 15, GFLAGS),
- GATE(0, "sclk_hdmi_hdcp", "xin24m", 0,
+ GATE(SCLK_HDMI_HDCP, "sclk_hdmi_hdcp", "xin24m", 0,
RK3288_CLKGATE_CON(5), 12, GFLAGS),
- GATE(0, "sclk_hdmi_cec", "xin32k", 0,
+ GATE(SCLK_HDMI_CEC, "sclk_hdmi_cec", "xin32k", 0,
RK3288_CLKGATE_CON(5), 11, GFLAGS),
- COMPOSITE(0, "aclk_hevc", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(ACLK_HEVC, "aclk_hevc", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(39), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(13), 13, GFLAGS),
- DIV(0, "hclk_hevc", "aclk_hevc", 0,
+ DIV(HCLK_HEVC, "hclk_hevc", "aclk_hevc", 0,
RK3288_CLKSEL_CON(40), 12, 2, DFLAGS),
- COMPOSITE(0, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_HEVC_CABAC, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(42), 6, 2, MFLAGS, 0, 5, DFLAGS,
RK3288_CLKGATE_CON(13), 14, GFLAGS),
- COMPOSITE(0, "sclk_hevc_core", mux_pll_src_cpll_gpll_npll_p, 0,
+ COMPOSITE(SCLK_HEVC_CORE, "sclk_hevc_core", mux_pll_src_cpll_gpll_npll_p, 0,
RK3288_CLKSEL_CON(42), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(13), 15, GFLAGS),
@@ -371,13 +371,13 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
COMPOSITE(0, "aclk_peri_src", mux_pll_src_cpll_gpll_p, 0,
RK3288_CLKSEL_CON(10), 15, 1, MFLAGS, 0, 5, DFLAGS,
RK3288_CLKGATE_CON(2), 0, GFLAGS),
- COMPOSITE_NOMUX(0, "pclk_peri", "aclk_peri_src", 0,
+ COMPOSITE_NOMUX(PCLK_PERI, "pclk_peri", "aclk_peri_src", 0,
RK3288_CLKSEL_CON(10), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
RK3288_CLKGATE_CON(2), 3, GFLAGS),
- COMPOSITE_NOMUX(0, "hclk_peri", "aclk_peri_src", 0,
+ COMPOSITE_NOMUX(HCLK_PERI, "hclk_peri", "aclk_peri_src", 0,
RK3288_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
RK3288_CLKGATE_CON(2), 2, GFLAGS),
- GATE(0, "aclk_peri", "aclk_peri_src", 0,
+ GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0,
RK3288_CLKGATE_CON(2), 1, GFLAGS),
/*
@@ -643,34 +643,34 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
GATE(HCLK_RGA, "hclk_rga", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 1, GFLAGS),
GATE(HCLK_VOP0, "hclk_vop0", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 6, GFLAGS),
GATE(HCLK_VOP1, "hclk_vop1", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 8, GFLAGS),
- GATE(0, "hclk_vio_ahb_arbi", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 9, GFLAGS),
- GATE(0, "hclk_vio_niu", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 10, GFLAGS),
- GATE(0, "hclk_vip", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 15, GFLAGS),
+ GATE(HCLK_VIO_AHB_ARBI, "hclk_vio_ahb_arbi", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 9, GFLAGS),
+ GATE(HCLK_VIO_NIU, "hclk_vio_niu", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 10, GFLAGS),
+ GATE(HCLK_VIP, "hclk_vip", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 15, GFLAGS),
GATE(HCLK_IEP, "hclk_iep", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 3, GFLAGS),
GATE(HCLK_ISP, "hclk_isp", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 1, GFLAGS),
- GATE(0, "hclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 10, GFLAGS),
- GATE(0, "pclk_mipi_dsi0", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 4, GFLAGS),
- GATE(0, "pclk_mipi_dsi1", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 5, GFLAGS),
- GATE(0, "pclk_mipi_csi", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 6, GFLAGS),
- GATE(0, "pclk_lvds_phy", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 7, GFLAGS),
- GATE(0, "pclk_edp_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 8, GFLAGS),
- GATE(0, "pclk_hdmi_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 9, GFLAGS),
- GATE(0, "pclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 11, GFLAGS),
+ GATE(HCLK_VIO2_H2P, "hclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 10, GFLAGS),
+ GATE(PCLK_MIPI_DSI0, "pclk_mipi_dsi0", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 4, GFLAGS),
+ GATE(PCLK_MIPI_DSI1, "pclk_mipi_dsi1", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 5, GFLAGS),
+ GATE(PCLK_MIPI_CSI, "pclk_mipi_csi", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 6, GFLAGS),
+ GATE(PCLK_LVDS_PHY, "pclk_lvds_phy", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 7, GFLAGS),
+ GATE(PCLK_EDP_CTRL, "pclk_edp_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 8, GFLAGS),
+ GATE(PCLK_HDMI_CTRL, "pclk_hdmi_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 9, GFLAGS),
+ GATE(PCLK_VIO2_H2P, "pclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 11, GFLAGS),
/* aclk_vio0 gates */
GATE(ACLK_VOP0, "aclk_vop0", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 5, GFLAGS),
- GATE(0, "aclk_iep", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 2, GFLAGS),
- GATE(0, "aclk_vio0_niu", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 11, GFLAGS),
- GATE(0, "aclk_vip", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 14, GFLAGS),
+ GATE(ACLK_IEP, "aclk_iep", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 2, GFLAGS),
+ GATE(ACLK_VIO0_NIU, "aclk_vio0_niu", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 11, GFLAGS),
+ GATE(ACLK_VIP, "aclk_vip", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 14, GFLAGS),
/* aclk_vio1 gates */
GATE(ACLK_VOP1, "aclk_vop1", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 7, GFLAGS),
- GATE(0, "aclk_isp", "aclk_vio1", 0, RK3288_CLKGATE_CON(16), 2, GFLAGS),
- GATE(0, "aclk_vio1_niu", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 12, GFLAGS),
+ GATE(ACLK_ISP, "aclk_isp", "aclk_vio1", 0, RK3288_CLKGATE_CON(16), 2, GFLAGS),
+ GATE(ACLK_VIO1_NIU, "aclk_vio1_niu", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 12, GFLAGS),
/* aclk_rga_pre gates */
GATE(ACLK_RGA, "aclk_rga", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 0, GFLAGS),
- GATE(0, "aclk_rga_niu", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 13, GFLAGS),
+ GATE(ACLK_RGA_NIU, "aclk_rga_niu", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 13, GFLAGS),
/*
* Other ungrouped clocks.
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 3/3] clk: rockchip: add clock node in PD_VIDEO
2014-09-24 15:33 ` Kever Yang
@ 2014-09-24 15:33 ` Kever Yang
-1 siblings, 0 replies; 16+ messages in thread
From: Kever Yang @ 2014-09-24 15:33 UTC (permalink / raw)
To: heiko, Mike Turquette
Cc: dianders, sonnyrao, addy.ke, cf, xjq, hj, huangtao,
linux-rockchip, Kever Yang, linux-arm-kernel, linux-kernel
This patch add the clock node in PD_VIDEO
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---
Changes in v2:
- split out the patch
drivers/clk/rockchip/clk-rk3288.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index d691a56..2cfcfb6 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -296,6 +296,17 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(3), 11, GFLAGS),
+ /*
+ * We use aclk_vdpu by default GRF_SOC_CON0[7] setting in system,
+ * so we ignore the mux and make clocks nodes as following,
+ * NOTE THAT hclk_vcodec is fix div by 4 from aclk_vcodec_pre.
+ */
+ GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vdpu", 0,
+ RK3288_CLKGATE_CON(9), 0, GFLAGS),
+ GATE(0, "hclk_vcodec_pre", "aclk_vdpu", 0,
+ RK3288_CLKGATE_CON(3), 10, GFLAGS),
+ GATE(HCLK_VCODEC, "hclk_vcodec", "hclk_vcodec_pre", 0,
+ RK3288_CLKGATE_CON(9), 1, GFLAGS),
COMPOSITE(0, "aclk_vio0", mux_pll_src_cpll_gpll_usb480m_p, 0,
RK3288_CLKSEL_CON(31), 6, 2, MFLAGS, 0, 5, DFLAGS,
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 3/3] clk: rockchip: add clock node in PD_VIDEO
@ 2014-09-24 15:33 ` Kever Yang
0 siblings, 0 replies; 16+ messages in thread
From: Kever Yang @ 2014-09-24 15:33 UTC (permalink / raw)
To: linux-arm-kernel
This patch add the clock node in PD_VIDEO
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---
Changes in v2:
- split out the patch
drivers/clk/rockchip/clk-rk3288.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index d691a56..2cfcfb6 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -296,6 +296,17 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(3), 11, GFLAGS),
+ /*
+ * We use aclk_vdpu by default GRF_SOC_CON0[7] setting in system,
+ * so we ignore the mux and make clocks nodes as following,
+ * NOTE THAT hclk_vcodec is fix div by 4 from aclk_vcodec_pre.
+ */
+ GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vdpu", 0,
+ RK3288_CLKGATE_CON(9), 0, GFLAGS),
+ GATE(0, "hclk_vcodec_pre", "aclk_vdpu", 0,
+ RK3288_CLKGATE_CON(3), 10, GFLAGS),
+ GATE(HCLK_VCODEC, "hclk_vcodec", "hclk_vcodec_pre", 0,
+ RK3288_CLKGATE_CON(9), 1, GFLAGS),
COMPOSITE(0, "aclk_vio0", mux_pll_src_cpll_gpll_usb480m_p, 0,
RK3288_CLKSEL_CON(31), 6, 2, MFLAGS, 0, 5, DFLAGS,
--
1.9.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH v2 1/3] clk: rockchip: add some needed clock binding id for rk3288
@ 2014-09-24 17:56 ` Doug Anderson
0 siblings, 0 replies; 16+ messages in thread
From: Doug Anderson @ 2014-09-24 17:56 UTC (permalink / raw)
To: Kever Yang
Cc: Heiko Stübner, Mike Turquette, Sonny Rao, Addy Ke,
Eddie Cai, Jianqun Xu, han jiang, Tao Huang, linux-rockchip,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
devicetree, linux-kernel
Kever,
On Wed, Sep 24, 2014 at 8:33 AM, Kever Yang <kever.yang@rock-chips.com> wrote:
> This patch add some clock binding id for different modules
> that under development and going to send upstream.
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> ---
>
> Changes in v2: None
>
> include/dt-bindings/clock/rk3288-cru.h | 38 +++++++++++++++++++++++++++++++++-
> 1 file changed, 37 insertions(+), 1 deletion(-)
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 1/3] clk: rockchip: add some needed clock binding id for rk3288
@ 2014-09-24 17:56 ` Doug Anderson
0 siblings, 0 replies; 16+ messages in thread
From: Doug Anderson @ 2014-09-24 17:56 UTC (permalink / raw)
To: Kever Yang
Cc: Heiko Stübner, Mike Turquette, Sonny Rao, Addy Ke,
Eddie Cai, Jianqun Xu, han jiang, Tao Huang,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Rob Herring,
Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Kever,
On Wed, Sep 24, 2014 at 8:33 AM, Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
> This patch add some clock binding id for different modules
> that under development and going to send upstream.
>
> Signed-off-by: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> Reviewed-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
> ---
>
> Changes in v2: None
>
> include/dt-bindings/clock/rk3288-cru.h | 38 +++++++++++++++++++++++++++++++++-
> 1 file changed, 37 insertions(+), 1 deletion(-)
Reviewed-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 2/3] clk: rockchip: use the clock id for nodes init
2014-09-24 15:33 ` Kever Yang
@ 2014-09-24 17:57 ` Doug Anderson
-1 siblings, 0 replies; 16+ messages in thread
From: Doug Anderson @ 2014-09-24 17:57 UTC (permalink / raw)
To: Kever Yang
Cc: Heiko Stübner, Mike Turquette, Sonny Rao, Addy Ke,
Eddie Cai, Jianqun Xu, han jiang, Tao Huang, linux-rockchip,
linux-arm-kernel, linux-kernel
Kever,
On Wed, Sep 24, 2014 at 8:33 AM, Kever Yang <kever.yang@rock-chips.com> wrote:
> This patch use the new defined clock ID to initial the clock nodes.
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> ---
>
> Changes in v2:
> - split into two patches of add clock node in PD_VIDEO and
> use new defined clock ID
>
> drivers/clk/rockchip/clk-rk3288.c | 68 +++++++++++++++++++--------------------
> 1 file changed, 34 insertions(+), 34 deletions(-)
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 2/3] clk: rockchip: use the clock id for nodes init
@ 2014-09-24 17:57 ` Doug Anderson
0 siblings, 0 replies; 16+ messages in thread
From: Doug Anderson @ 2014-09-24 17:57 UTC (permalink / raw)
To: linux-arm-kernel
Kever,
On Wed, Sep 24, 2014 at 8:33 AM, Kever Yang <kever.yang@rock-chips.com> wrote:
> This patch use the new defined clock ID to initial the clock nodes.
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> ---
>
> Changes in v2:
> - split into two patches of add clock node in PD_VIDEO and
> use new defined clock ID
>
> drivers/clk/rockchip/clk-rk3288.c | 68 +++++++++++++++++++--------------------
> 1 file changed, 34 insertions(+), 34 deletions(-)
Reviewed-by: Doug Anderson <dianders@chromium.org>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 3/3] clk: rockchip: add clock node in PD_VIDEO
2014-09-24 15:33 ` Kever Yang
@ 2014-09-24 19:48 ` Doug Anderson
-1 siblings, 0 replies; 16+ messages in thread
From: Doug Anderson @ 2014-09-24 19:48 UTC (permalink / raw)
To: Kever Yang
Cc: Heiko Stübner, Mike Turquette, Sonny Rao, Addy Ke,
Eddie Cai, Jianqun Xu, han jiang, Tao Huang, linux-rockchip,
linux-arm-kernel, linux-kernel
Kever,
On Wed, Sep 24, 2014 at 8:33 AM, Kever Yang <kever.yang@rock-chips.com> wrote:
> This patch add the clock node in PD_VIDEO
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> ---
>
> Changes in v2:
> - split out the patch
>
> drivers/clk/rockchip/clk-rk3288.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
> index d691a56..2cfcfb6 100644
> --- a/drivers/clk/rockchip/clk-rk3288.c
> +++ b/drivers/clk/rockchip/clk-rk3288.c
> @@ -296,6 +296,17 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
> COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
> RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
> RK3288_CLKGATE_CON(3), 11, GFLAGS),
> + /*
> + * We use aclk_vdpu by default GRF_SOC_CON0[7] setting in system,
> + * so we ignore the mux and make clocks nodes as following,
I guess we can't add the mux for now because it's in the GRF and not
in the clock area and the current clock tables don't have support for
that. I guess that OK for now, but eventually we should probably add
it in.
> + * NOTE THAT hclk_vcodec is fix div by 4 from aclk_vcodec_pre.
Typo: from "aclk_vcodec_pre" or from "hclk_vcodec_pre"?
> + */
> + GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vdpu", 0,
> + RK3288_CLKGATE_CON(9), 0, GFLAGS),
> + GATE(0, "hclk_vcodec_pre", "aclk_vdpu", 0,
> + RK3288_CLKGATE_CON(3), 10, GFLAGS),
> + GATE(HCLK_VCODEC, "hclk_vcodec", "hclk_vcodec_pre", 0,
> + RK3288_CLKGATE_CON(9), 1, GFLAGS),
Shouldn't there be a fixed "/ 4" clock somewhere in here? That way
the clock rate will be reported correctly?
I guess the cleanest would be to add support to rockchip/clk.c to call
clk_register_fixed_factor() somehow. I guess I'll leave it to you and
Heiko to decide what you want to do here.
-Doug
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 3/3] clk: rockchip: add clock node in PD_VIDEO
@ 2014-09-24 19:48 ` Doug Anderson
0 siblings, 0 replies; 16+ messages in thread
From: Doug Anderson @ 2014-09-24 19:48 UTC (permalink / raw)
To: linux-arm-kernel
Kever,
On Wed, Sep 24, 2014 at 8:33 AM, Kever Yang <kever.yang@rock-chips.com> wrote:
> This patch add the clock node in PD_VIDEO
>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> ---
>
> Changes in v2:
> - split out the patch
>
> drivers/clk/rockchip/clk-rk3288.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
> index d691a56..2cfcfb6 100644
> --- a/drivers/clk/rockchip/clk-rk3288.c
> +++ b/drivers/clk/rockchip/clk-rk3288.c
> @@ -296,6 +296,17 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
> COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
> RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
> RK3288_CLKGATE_CON(3), 11, GFLAGS),
> + /*
> + * We use aclk_vdpu by default GRF_SOC_CON0[7] setting in system,
> + * so we ignore the mux and make clocks nodes as following,
I guess we can't add the mux for now because it's in the GRF and not
in the clock area and the current clock tables don't have support for
that. I guess that OK for now, but eventually we should probably add
it in.
> + * NOTE THAT hclk_vcodec is fix div by 4 from aclk_vcodec_pre.
Typo: from "aclk_vcodec_pre" or from "hclk_vcodec_pre"?
> + */
> + GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vdpu", 0,
> + RK3288_CLKGATE_CON(9), 0, GFLAGS),
> + GATE(0, "hclk_vcodec_pre", "aclk_vdpu", 0,
> + RK3288_CLKGATE_CON(3), 10, GFLAGS),
> + GATE(HCLK_VCODEC, "hclk_vcodec", "hclk_vcodec_pre", 0,
> + RK3288_CLKGATE_CON(9), 1, GFLAGS),
Shouldn't there be a fixed "/ 4" clock somewhere in here? That way
the clock rate will be reported correctly?
I guess the cleanest would be to add support to rockchip/clk.c to call
clk_register_fixed_factor() somehow. I guess I'll leave it to you and
Heiko to decide what you want to do here.
-Doug
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 3/3] clk: rockchip: add clock node in PD_VIDEO
2014-09-24 19:48 ` Doug Anderson
@ 2014-09-25 1:28 ` Kever Yang
-1 siblings, 0 replies; 16+ messages in thread
From: Kever Yang @ 2014-09-25 1:28 UTC (permalink / raw)
To: Doug Anderson
Cc: Tao Huang, Addy Ke, Mike Turquette, Heiko Stübner,
linux-kernel, linux-rockchip, Jianqun Xu, Eddie Cai, han jiang,
Sonny Rao, linux-arm-kernel
Hi Doug,
On 09/25/2014 03:48 AM, Doug Anderson wrote:
> Kever,
>
> On Wed, Sep 24, 2014 at 8:33 AM, Kever Yang <kever.yang@rock-chips.com> wrote:
>> This patch add the clock node in PD_VIDEO
>>
>> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
>> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
>> ---
>>
>> Changes in v2:
>> - split out the patch
>>
>> drivers/clk/rockchip/clk-rk3288.c | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
>> index d691a56..2cfcfb6 100644
>> --- a/drivers/clk/rockchip/clk-rk3288.c
>> +++ b/drivers/clk/rockchip/clk-rk3288.c
>> @@ -296,6 +296,17 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
>> COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
>> RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
>> RK3288_CLKGATE_CON(3), 11, GFLAGS),
>> + /*
>> + * We use aclk_vdpu by default GRF_SOC_CON0[7] setting in system,
>> + * so we ignore the mux and make clocks nodes as following,
> I guess we can't add the mux for now because it's in the GRF and not
> in the clock area and the current clock tables don't have support for
> that. I guess that OK for now, but eventually we should probably add
> it in.
The mux setting moved to GRF because it switch the clock source and some
other
controller logic.
The VCODEC can be used as encoder or decoder, we use it as decoder by
default,
so I guess we can ignore the decoder part before the clock module can
handle this.
>
>
>> + * NOTE THAT hclk_vcodec is fix div by 4 from aclk_vcodec_pre.
> Typo: from "aclk_vcodec_pre" or from "hclk_vcodec_pre"?
hclk_vcodec_pre is /4 from aclk_vcodec_pre, and hclk_vcodec has a gate
from hclk_vcodec_pre.
I should fix this.
>
>> + */
>> + GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vdpu", 0,
>> + RK3288_CLKGATE_CON(9), 0, GFLAGS),
>> + GATE(0, "hclk_vcodec_pre", "aclk_vdpu", 0,
>> + RK3288_CLKGATE_CON(3), 10, GFLAGS),
>> + GATE(HCLK_VCODEC, "hclk_vcodec", "hclk_vcodec_pre", 0,
>> + RK3288_CLKGATE_CON(9), 1, GFLAGS),
> Shouldn't there be a fixed "/ 4" clock somewhere in here? That way
> the clock rate will be reported correctly?
>
> I guess the cleanest would be to add support to rockchip/clk.c to call
> clk_register_fixed_factor() somehow. I guess I'll leave it to you and
> Heiko to decide what you want to do here.
There is a fixed "/4" that not add to this tree, which makes we get a 4
times
of real rate when we get the HCLK_VCODEC, that is why I write a commend
with "NOTE THAT" before.
I know there is a clk_register_fixed_factor(), but I'm not sure how to use
it here, this is a table.
I'll try to add the clk_register_fixed_factor() today.
-Kever
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 3/3] clk: rockchip: add clock node in PD_VIDEO
@ 2014-09-25 1:28 ` Kever Yang
0 siblings, 0 replies; 16+ messages in thread
From: Kever Yang @ 2014-09-25 1:28 UTC (permalink / raw)
To: linux-arm-kernel
Hi Doug,
On 09/25/2014 03:48 AM, Doug Anderson wrote:
> Kever,
>
> On Wed, Sep 24, 2014 at 8:33 AM, Kever Yang <kever.yang@rock-chips.com> wrote:
>> This patch add the clock node in PD_VIDEO
>>
>> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
>> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
>> ---
>>
>> Changes in v2:
>> - split out the patch
>>
>> drivers/clk/rockchip/clk-rk3288.c | 11 +++++++++++
>> 1 file changed, 11 insertions(+)
>>
>> diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
>> index d691a56..2cfcfb6 100644
>> --- a/drivers/clk/rockchip/clk-rk3288.c
>> +++ b/drivers/clk/rockchip/clk-rk3288.c
>> @@ -296,6 +296,17 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
>> COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0,
>> RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
>> RK3288_CLKGATE_CON(3), 11, GFLAGS),
>> + /*
>> + * We use aclk_vdpu by default GRF_SOC_CON0[7] setting in system,
>> + * so we ignore the mux and make clocks nodes as following,
> I guess we can't add the mux for now because it's in the GRF and not
> in the clock area and the current clock tables don't have support for
> that. I guess that OK for now, but eventually we should probably add
> it in.
The mux setting moved to GRF because it switch the clock source and some
other
controller logic.
The VCODEC can be used as encoder or decoder, we use it as decoder by
default,
so I guess we can ignore the decoder part before the clock module can
handle this.
>
>
>> + * NOTE THAT hclk_vcodec is fix div by 4 from aclk_vcodec_pre.
> Typo: from "aclk_vcodec_pre" or from "hclk_vcodec_pre"?
hclk_vcodec_pre is /4 from aclk_vcodec_pre, and hclk_vcodec has a gate
from hclk_vcodec_pre.
I should fix this.
>
>> + */
>> + GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vdpu", 0,
>> + RK3288_CLKGATE_CON(9), 0, GFLAGS),
>> + GATE(0, "hclk_vcodec_pre", "aclk_vdpu", 0,
>> + RK3288_CLKGATE_CON(3), 10, GFLAGS),
>> + GATE(HCLK_VCODEC, "hclk_vcodec", "hclk_vcodec_pre", 0,
>> + RK3288_CLKGATE_CON(9), 1, GFLAGS),
> Shouldn't there be a fixed "/ 4" clock somewhere in here? That way
> the clock rate will be reported correctly?
>
> I guess the cleanest would be to add support to rockchip/clk.c to call
> clk_register_fixed_factor() somehow. I guess I'll leave it to you and
> Heiko to decide what you want to do here.
There is a fixed "/4" that not add to this tree, which makes we get a 4
times
of real rate when we get the HCLK_VCODEC, that is why I write a commend
with "NOTE THAT" before.
I know there is a clk_register_fixed_factor(), but I'm not sure how to use
it here, this is a table.
I'll try to add the clk_register_fixed_factor() today.
-Kever
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2014-09-25 1:28 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-24 15:33 [PATCH v2 0/3] Add clock binding id for rk3288 Kever Yang
2014-09-24 15:33 ` Kever Yang
2014-09-24 15:33 ` Kever Yang
2014-09-24 15:33 ` [PATCH v2 1/3] clk: rockchip: add some needed " Kever Yang
2014-09-24 17:56 ` Doug Anderson
2014-09-24 17:56 ` Doug Anderson
2014-09-24 15:33 ` [PATCH v2 2/3] clk: rockchip: use the clock id for nodes init Kever Yang
2014-09-24 15:33 ` Kever Yang
2014-09-24 17:57 ` Doug Anderson
2014-09-24 17:57 ` Doug Anderson
2014-09-24 15:33 ` [PATCH v2 3/3] clk: rockchip: add clock node in PD_VIDEO Kever Yang
2014-09-24 15:33 ` Kever Yang
2014-09-24 19:48 ` Doug Anderson
2014-09-24 19:48 ` Doug Anderson
2014-09-25 1:28 ` Kever Yang
2014-09-25 1:28 ` Kever Yang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.