All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alex Deucher <alexdeucher-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Sylvain Munaut <246tnt-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: "Koenig,
	Christian" <Christian.Koenig-5C7GfCeVMHo@public.gmane.org>,
	amd-gfx list
	<amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org>
Subject: Re: Spontaneous reboots when using RX 560
Date: Thu, 24 Oct 2019 12:55:59 -0400	[thread overview]
Message-ID: <CADnq5_OL2ra6k8HHnAc=2Zp=bkKA6pLmGDacS3V+6RYHPgwtjg@mail.gmail.com> (raw)
In-Reply-To: <CAHL+j0-D=AX7==2RRTXDaKEQwid8x817XO-upaDmCemMpvEF6Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>

On Tue, Oct 22, 2019 at 7:01 AM Sylvain Munaut <246tnt@gmail.com> wrote:
>
> Hi All,
>
> More testing over the last few days showed that only either the lowest
> power mode, or slightly above can work. Oh, I also tested 5.4-rc3 just
> in case but same results.
> It doesn't seem to be the affected by PCIe lane speed, Memory seems
> stable at 625M and almost at 1500M (only the sustained heavy workload
> eventually bring it down), but the SoC speed seems pretty touchy.
>
> So that would seem to confirm something is wrong either in the power
> play table itself, or its interpretation by the linux driver.
> I tried brute-loading some other RX570 pptable into it, but that
> didn't really do much. After writing it to pp_table, the card was
> stuck at its lower clock mode. Working fine, but same as if I had
> forced it to low power.
>
> Is there anyway to extract the power play table from windows since
> it's running fine there ?
> I'm kind of running out of idea of what to try next.

Can you send me a copy of the vbios from that board?

(as root)
(use lspci to get the bus id)
cd /sys/bus/pci/devices/<pci bus id>
echo 1 > rom
cat rom > /tmp/vbios.rom
echo 0 > rom
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

WARNING: multiple messages have this Message-ID (diff)
From: Alex Deucher <alexdeucher@gmail.com>
To: Sylvain Munaut <246tnt@gmail.com>
Cc: "Koenig, Christian" <Christian.Koenig@amd.com>,
	amd-gfx list <amd-gfx@lists.freedesktop.org>
Subject: Re: Spontaneous reboots when using RX 560
Date: Thu, 24 Oct 2019 12:55:59 -0400	[thread overview]
Message-ID: <CADnq5_OL2ra6k8HHnAc=2Zp=bkKA6pLmGDacS3V+6RYHPgwtjg@mail.gmail.com> (raw)
Message-ID: <20191024165559.__emXEvA42DgvFg0HmNnPOJ6E0M9wpvwHW5VLIAtgsA@z> (raw)
In-Reply-To: <CAHL+j0-D=AX7==2RRTXDaKEQwid8x817XO-upaDmCemMpvEF6Q@mail.gmail.com>

On Tue, Oct 22, 2019 at 7:01 AM Sylvain Munaut <246tnt@gmail.com> wrote:
>
> Hi All,
>
> More testing over the last few days showed that only either the lowest
> power mode, or slightly above can work. Oh, I also tested 5.4-rc3 just
> in case but same results.
> It doesn't seem to be the affected by PCIe lane speed, Memory seems
> stable at 625M and almost at 1500M (only the sustained heavy workload
> eventually bring it down), but the SoC speed seems pretty touchy.
>
> So that would seem to confirm something is wrong either in the power
> play table itself, or its interpretation by the linux driver.
> I tried brute-loading some other RX570 pptable into it, but that
> didn't really do much. After writing it to pp_table, the card was
> stuck at its lower clock mode. Working fine, but same as if I had
> forced it to low power.
>
> Is there anyway to extract the power play table from windows since
> it's running fine there ?
> I'm kind of running out of idea of what to try next.

Can you send me a copy of the vbios from that board?

(as root)
(use lspci to get the bus id)
cd /sys/bus/pci/devices/<pci bus id>
echo 1 > rom
cat rom > /tmp/vbios.rom
echo 0 > rom
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

  parent reply	other threads:[~2019-10-24 16:55 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-17 14:12 Spontaneous reboots when using RX 560 Sylvain Munaut
     [not found] ` <CAHL+j0_2ir=8hHDoyqizweOUSV6XfqC-UCD15WuJ9vvptNLr0g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-17 14:14   ` Alex Deucher
     [not found]     ` <CADnq5_N0r8O2vQapGaary0L-OfdTdz-ezcMJK90+Gy2sPujYcw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-17 14:29       ` Sylvain Munaut
     [not found]         ` <CAHL+j08qsu1pSOZPLB9-XWw9ZmT2OamaWPBJV4T3Vzx_C8cD7g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-17 17:13           ` Koenig, Christian
     [not found]             ` <67658520-b3f4-d2f9-7247-dd434ab5c30b-5C7GfCeVMHo@public.gmane.org>
2019-10-17 19:08               ` Sylvain Munaut
     [not found]                 ` <CAHL+j0-Nm+6VFXi_w4iciNdG40zubpqvh1RXs3MFfXJK2mFr0Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-17 20:12                   ` Sylvain Munaut
     [not found]                     ` <CAHL+j0_=r1XBOzwiQmbZTVoRsZ5=Du3pAPd_n7pia81FegdHhw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-18 10:32                       ` Koenig, Christian
     [not found]                         ` <57826a9e-5842-4ddd-a456-67d1d1b9a9ce-5C7GfCeVMHo@public.gmane.org>
2019-10-18 12:07                           ` Sylvain Munaut
     [not found]                             ` <CAHL+j0-NJ8F4RpMJ5m9_9gk_t+zhwFwVmG6MMy4TBYa4XjnWEA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-18 13:42                               ` Alex Deucher
     [not found]                                 ` <CADnq5_MTYe5z0gbtY0eCnUax2D=HZYBQF7YWPS86pikDXGVWOA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-18 14:35                                   ` Sylvain Munaut
     [not found]                                     ` <CAHL+j0_Dn9VZ7CN-yaaFP4kk39gWTKu4fLZ6SN4Dj17e2z+4RQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-19  9:37                                       ` Sylvain Munaut
     [not found]                                         ` <CAHL+j08BgqmOoQHnsfE3xtZFsz14cOZ=Xui3o7mENJd3Fq0z0g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-19 23:41                                           ` Sylvain Munaut
     [not found]                                             ` <CAHL+j0-E83G4+xYDcJ2xB2abF9DXA78CXfP9LrVVktTmvsBYvg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-22 11:01                                               ` Sylvain Munaut
     [not found]                                                 ` <CAHL+j0-D=AX7==2RRTXDaKEQwid8x817XO-upaDmCemMpvEF6Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-24 16:55                                                   ` Alex Deucher [this message]
2019-10-24 16:55                                                     ` Alex Deucher
     [not found]                                                     ` <CADnq5_OL2ra6k8HHnAc=2Zp=bkKA6pLmGDacS3V+6RYHPgwtjg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-10-24 17:33                                                       ` Sylvain Munaut
2019-10-24 17:33                                                         ` Sylvain Munaut
2019-10-29 13:43                                                       ` Sylvain Munaut
2019-10-29 13:43                                                         ` Sylvain Munaut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CADnq5_OL2ra6k8HHnAc=2Zp=bkKA6pLmGDacS3V+6RYHPgwtjg@mail.gmail.com' \
    --to=alexdeucher-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=246tnt-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=Christian.Koenig-5C7GfCeVMHo@public.gmane.org \
    --cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.