* [boundary-imx] Enquiry boundary-imx_4.1.15_1.0.0_ga kernel with egalax touch support on sabrelite
@ 2016-12-29 7:42 Shrikant Bobade
2017-01-12 13:09 ` Otavio Salvador
0 siblings, 1 reply; 6+ messages in thread
From: Shrikant Bobade @ 2016-12-29 7:42 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 2106 bytes --]
Hi,
I used boundary-eval-image-nitrogen6x-krogoth-next.sdcard.gz
https://boundarydevices.com/krogoth-next-yocto-release/ on imx6q-sabrelite
target along with 10Inch Hannstar LVDS Display connected.
Observed the egalax touch is not working out of box. Does anyone else faced
similar issue?
Is Hannstar LVDS display supported by default?
short log:
Poky (Yocto Project Reference Distro) 2.1.1 nitrogen6x /dev/ttymxc1
nitrogen6x login: root
root@nitrogen6x:~#
root@nitrogen6x:~# cat /proc/version
Linux version 4.1.15-1.0.0_ga+yocto+ge1eae97 (ian@ian) (gcc version 5.3.0
(GCC) ) #4 SMP PREEMPT Thu Oct 20 13:50:44 PDT 2016
root@nitrogen6x:~#
root@nitrogen6x:~# dmesg | grep -i egalax
[ 8.080309] input: EETI eGalax Touch Screen as
/devices/soc0/soc/2100000.aips-bus/21a8000.i2c/i2c-2/2-0004/input/input1
root@nitrogen6x:~#
root@nitrogen6x:~# cat /proc/bus/input/devices
I: Bus=0019 Vendor=0001 Product=0001 Version=0100
N: Name=”gpio-keys”
P: Phys=gpio-keys/input0
S: Sysfs=/devices/soc0/gpio-keys/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=1000 40000800 1c0000 0 0 0
I: Bus=0018 Vendor=0000 Product=0000 Version=0000
N: Name=”EETI eGalax Touch Screen”
P: Phys=
S:
Sysfs=/devices/soc0/soc/2100000.aips-bus/21a8000.i2c/i2c-2/2-0004/input/input1
U: Uniq=
H: Handlers=mouse0 event1
B: PROP=0
B: EV=b
B: KEY=400 0 0 0 0 0 0 0 0 0 0
B: ABS=2608000 3
root@nitrogen6x:~#
root@nitrogen6x:~# cat /proc/interrupts | grep -i egalax
46: 12 0 0 0 gpio-mxc 9 Edge egalax_ts
root@nitrogen6x:~#
root@nitrogen6x:~# zcat /proc/config.gz | grep -i egalax
CONFIG_TOUCHSCREEN_EGALAX=m
root@nitrogen6x:~#
root@nitrogen6x:~# lsmod | grep egalax
egalax_ts 16384 0
root@nitrogen6x:~#
with random taps on LVDS display, can’t see random chars on event1 &
interrupt increment..
root@nitrogen6x:~# cat /dev/input/event1
^C
root@nitrogen6x:~#
root@nitrogen6x:~# cat /proc/interrupts | grep -i egalax
46: 12 0 0 0 gpio-mxc 9 Edge egalax_ts
root@nitrogen6x:~#
Any pointers or references will be a great help.
Thanks
Shrikant
[-- Attachment #2: Type: text/html, Size: 2607 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [boundary-imx] Enquiry boundary-imx_4.1.15_1.0.0_ga kernel with egalax touch support on sabrelite
2016-12-29 7:42 [boundary-imx] Enquiry boundary-imx_4.1.15_1.0.0_ga kernel with egalax touch support on sabrelite Shrikant Bobade
@ 2017-01-12 13:09 ` Otavio Salvador
2017-01-12 13:14 ` Gary Thomas
0 siblings, 1 reply; 6+ messages in thread
From: Otavio Salvador @ 2017-01-12 13:09 UTC (permalink / raw)
To: Shrikant Bobade; +Cc: meta-freescale
Hello,
On Thu, Dec 29, 2016 at 5:42 AM, Shrikant Bobade
<bobadeshrikant@gmail.com> wrote:
> I used boundary-eval-image-nitrogen6x-krogoth-next.sdcard.gz
> https://boundarydevices.com/krogoth-next-yocto-release/ on imx6q-sabrelite
> target along with 10Inch Hannstar LVDS Display connected.
>
> Observed the egalax touch is not working out of box. Does anyone else faced
> similar issue?
> Is Hannstar LVDS display supported by default?
Do you mind to test with other test images?
http://blink.ossystems.com.br/manufacturer/boundary
Those uses new kernel and provides new boot scripts. It may provide a
better result. Make sure to also use the latest production release for
U-Boot provided by them.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [boundary-imx] Enquiry boundary-imx_4.1.15_1.0.0_ga kernel with egalax touch support on sabrelite
2017-01-12 13:09 ` Otavio Salvador
@ 2017-01-12 13:14 ` Gary Thomas
2017-01-13 0:10 ` Ian Coolidge
0 siblings, 1 reply; 6+ messages in thread
From: Gary Thomas @ 2017-01-12 13:14 UTC (permalink / raw)
To: meta-freescale
On 2017-01-12 14:09, Otavio Salvador wrote:
> Hello,
>
> On Thu, Dec 29, 2016 at 5:42 AM, Shrikant Bobade
> <bobadeshrikant@gmail.com> wrote:
>> I used boundary-eval-image-nitrogen6x-krogoth-next.sdcard.gz
>> https://boundarydevices.com/krogoth-next-yocto-release/ on imx6q-sabrelite
>> target along with 10Inch Hannstar LVDS Display connected.
>>
>> Observed the egalax touch is not working out of box. Does anyone else faced
>> similar issue?
>> Is Hannstar LVDS display supported by default?
>
> Do you mind to test with other test images?
>
> http://blink.ossystems.com.br/manufacturer/boundary
>
> Those uses new kernel and provides new boot scripts. It may provide a
> better result. Make sure to also use the latest production release for
> U-Boot provided by them.
>
Note that Ian (Boundary Devices) just sent some patches for what
seems to be this problem. It may be easier to just check against
those.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [boundary-imx] Enquiry boundary-imx_4.1.15_1.0.0_ga kernel with egalax touch support on sabrelite
2017-01-12 13:14 ` Gary Thomas
@ 2017-01-13 0:10 ` Ian Coolidge
2017-01-16 14:34 ` Shrikant Bobade
0 siblings, 1 reply; 6+ messages in thread
From: Ian Coolidge @ 2017-01-13 0:10 UTC (permalink / raw)
To: Gary Thomas; +Cc: meta-freescale Mailing List
[-- Attachment #1: Type: text/plain, Size: 1788 bytes --]
This should be fixed in the latest kernel. Waiting on patch to be accepted
to update our morty blog post and images.
You can update your builds independently to the latest revision here to see
the fix:
https://github.com/boundarydevices/linux-imx6/commits/boundary-imx_4.1.15_2.0.0_ga
On Thu, Jan 12, 2017 at 5:14 AM, Gary Thomas <gary@mlbassoc.com> wrote:
> On 2017-01-12 14:09, Otavio Salvador wrote:
>
>> Hello,
>>
>> On Thu, Dec 29, 2016 at 5:42 AM, Shrikant Bobade
>> <bobadeshrikant@gmail.com> wrote:
>>
>>> I used boundary-eval-image-nitrogen6x-krogoth-next.sdcard.gz
>>> https://boundarydevices.com/krogoth-next-yocto-release/ on
>>> imx6q-sabrelite
>>> target along with 10Inch Hannstar LVDS Display connected.
>>>
>>> Observed the egalax touch is not working out of box. Does anyone else
>>> faced
>>> similar issue?
>>> Is Hannstar LVDS display supported by default?
>>>
>>
>> Do you mind to test with other test images?
>>
>> http://blink.ossystems.com.br/manufacturer/boundary
>>
>> Those uses new kernel and provides new boot scripts. It may provide a
>> better result. Make sure to also use the latest production release for
>> U-Boot provided by them.
>>
>>
> Note that Ian (Boundary Devices) just sent some patches for what
> seems to be this problem. It may be easier to just check against
> those.
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
[-- Attachment #2: Type: text/html, Size: 3085 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [boundary-imx] Enquiry boundary-imx_4.1.15_1.0.0_ga kernel with egalax touch support on sabrelite
2017-01-13 0:10 ` Ian Coolidge
@ 2017-01-16 14:34 ` Shrikant Bobade
2017-01-16 17:33 ` Ian Coolidge
0 siblings, 1 reply; 6+ messages in thread
From: Shrikant Bobade @ 2017-01-16 14:34 UTC (permalink / raw)
To: Ian Coolidge; +Cc: meta-freescale Mailing List, Gary Thomas
[-- Attachment #1: Type: text/plain, Size: 2179 bytes --]
Thanks, change serves out of box working of egalax.
Thanks
Shrikant
On Fri, Jan 13, 2017 at 5:40 AM, Ian Coolidge <ian@boundarydevices.com>
wrote:
>
> This should be fixed in the latest kernel. Waiting on patch to be
accepted to update our morty blog post and images.
>
> You can update your builds independently to the latest revision here to
see the fix:
https://github.com/boundarydevices/linux-imx6/commits/boundary-imx_4.1.15_2.0.0_ga
>
> On Thu, Jan 12, 2017 at 5:14 AM, Gary Thomas <gary@mlbassoc.com> wrote:
>>
>> On 2017-01-12 14:09, Otavio Salvador wrote:
>>>
>>> Hello,
>>>
>>> On Thu, Dec 29, 2016 at 5:42 AM, Shrikant Bobade
>>> <bobadeshrikant@gmail.com> wrote:
>>>>
>>>> I used boundary-eval-image-nitrogen6x-krogoth-next.sdcard.gz
>>>> https://boundarydevices.com/krogoth-next-yocto-release/ on
imx6q-sabrelite
>>>> target along with 10Inch Hannstar LVDS Display connected.
>>>>
>>>> Observed the egalax touch is not working out of box. Does anyone else
faced
>>>> similar issue?
>>>> Is Hannstar LVDS display supported by default?
>>>
>>>
>>> Do you mind to test with other test images?
>>>
>>> http://blink.ossystems.com.br/manufacturer/boundary
>>>
>>> Those uses new kernel and provides new boot scripts. It may provide a
>>> better result. Make sure to also use the latest production release for
>>> U-Boot provided by them.
>>>
>>
>> Note that Ian (Boundary Devices) just sent some patches for what
>> seems to be this problem. It may be easier to just check against
>> those.
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas | Consulting for the
>> MLB Associates | Embedded world
>> ------------------------------------------------------------
>>
>> --
>> _______________________________________________
>> meta-freescale mailing list
>> meta-freescale@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/meta-freescale
>
>
>
> --
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>
[-- Attachment #2: Type: text/html, Size: 3403 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [boundary-imx] Enquiry boundary-imx_4.1.15_1.0.0_ga kernel with egalax touch support on sabrelite
2017-01-16 14:34 ` Shrikant Bobade
@ 2017-01-16 17:33 ` Ian Coolidge
0 siblings, 0 replies; 6+ messages in thread
From: Ian Coolidge @ 2017-01-16 17:33 UTC (permalink / raw)
To: Shrikant Bobade; +Cc: meta-freescale Mailing List, Gary Thomas
[-- Attachment #1: Type: text/plain, Size: 2583 bytes --]
That's good to hear, it's what we expected.
When will the patch be accepted? Or have I messed up my meta-freescale
tagging in my patch e-mail and it got missed.
-Ian
On Mon, Jan 16, 2017 at 6:34 AM, Shrikant Bobade <bobadeshrikant@gmail.com>
wrote:
> Thanks, change serves out of box working of egalax.
>
> Thanks
> Shrikant
>
>
> On Fri, Jan 13, 2017 at 5:40 AM, Ian Coolidge <ian@boundarydevices.com>
> wrote:
> >
> > This should be fixed in the latest kernel. Waiting on patch to be
> accepted to update our morty blog post and images.
> >
> > You can update your builds independently to the latest revision here to
> see the fix: https://github.com/boundarydevices/linux-imx6/
> commits/boundary-imx_4.1.15_2.0.0_ga
> >
> > On Thu, Jan 12, 2017 at 5:14 AM, Gary Thomas <gary@mlbassoc.com> wrote:
> >>
> >> On 2017-01-12 14:09, Otavio Salvador wrote:
> >>>
> >>> Hello,
> >>>
> >>> On Thu, Dec 29, 2016 at 5:42 AM, Shrikant Bobade
> >>> <bobadeshrikant@gmail.com> wrote:
> >>>>
> >>>> I used boundary-eval-image-nitrogen6x-krogoth-next.sdcard.gz
> >>>> https://boundarydevices.com/krogoth-next-yocto-release/ on
> imx6q-sabrelite
> >>>> target along with 10Inch Hannstar LVDS Display connected.
> >>>>
> >>>> Observed the egalax touch is not working out of box. Does anyone else
> faced
> >>>> similar issue?
> >>>> Is Hannstar LVDS display supported by default?
> >>>
> >>>
> >>> Do you mind to test with other test images?
> >>>
> >>> http://blink.ossystems.com.br/manufacturer/boundary
> >>>
> >>> Those uses new kernel and provides new boot scripts. It may provide a
> >>> better result. Make sure to also use the latest production release for
> >>> U-Boot provided by them.
> >>>
> >>
> >> Note that Ian (Boundary Devices) just sent some patches for what
> >> seems to be this problem. It may be easier to just check against
> >> those.
> >>
> >> --
> >> ------------------------------------------------------------
> >> Gary Thomas | Consulting for the
> >> MLB Associates | Embedded world
> >> ------------------------------------------------------------
> >>
> >> --
> >> _______________________________________________
> >> meta-freescale mailing list
> >> meta-freescale@yoctoproject.org
> >> https://lists.yoctoproject.org/listinfo/meta-freescale
> >
> >
> >
> > --
> > _______________________________________________
> > meta-freescale mailing list
> > meta-freescale@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/meta-freescale
> >
>
[-- Attachment #2: Type: text/html, Size: 4393 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-01-16 17:33 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-12-29 7:42 [boundary-imx] Enquiry boundary-imx_4.1.15_1.0.0_ga kernel with egalax touch support on sabrelite Shrikant Bobade
2017-01-12 13:09 ` Otavio Salvador
2017-01-12 13:14 ` Gary Thomas
2017-01-13 0:10 ` Ian Coolidge
2017-01-16 14:34 ` Shrikant Bobade
2017-01-16 17:33 ` Ian Coolidge
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.