* [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu @ 2017-11-19 17:30 Heinrich Schuchardt 2017-11-20 7:07 ` Bin Meng 0 siblings, 1 reply; 7+ messages in thread From: Heinrich Schuchardt @ 2017-11-19 17:30 UTC (permalink / raw) To: u-boot Enable CONFIG_DISTRO_DEFAULTS in qemu-x86_64_defconfig and qemu-x86_defconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> --- configs/qemu-x86_64_defconfig | 1 + configs/qemu-x86_defconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index 0cea3694d0..4ebf062156 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -14,6 +14,7 @@ CONFIG_SMP=y CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_GENERATE_MP_TABLE=y CONFIG_GENERATE_ACPI_TABLE=y +CONFIG_DISTRO_DEFAULTS=y CONFIG_BUILD_ROM=y CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index bf7fbc723d..5dfc8307b3 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -5,6 +5,7 @@ CONFIG_SMP=y CONFIG_GENERATE_PIRQ_TABLE=y CONFIG_GENERATE_MP_TABLE=y CONFIG_GENERATE_ACPI_TABLE=y +CONFIG_DISTRO_DEFAULTS=y CONFIG_BUILD_ROM=y CONFIG_FIT=y CONFIG_BOOTSTAGE=y -- 2.15.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu 2017-11-19 17:30 [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu Heinrich Schuchardt @ 2017-11-20 7:07 ` Bin Meng 2017-11-20 9:20 ` Bin Meng 0 siblings, 1 reply; 7+ messages in thread From: Bin Meng @ 2017-11-20 7:07 UTC (permalink / raw) To: u-boot On Mon, Nov 20, 2017 at 1:30 AM, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > Enable CONFIG_DISTRO_DEFAULTS in qemu-x86_64_defconfig > and qemu-x86_defconfig. > > Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> > --- > configs/qemu-x86_64_defconfig | 1 + > configs/qemu-x86_defconfig | 1 + > 2 files changed, 2 insertions(+) > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> ^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu 2017-11-20 7:07 ` Bin Meng @ 2017-11-20 9:20 ` Bin Meng 2017-11-24 8:12 ` Bin Meng 0 siblings, 1 reply; 7+ messages in thread From: Bin Meng @ 2017-11-20 9:20 UTC (permalink / raw) To: u-boot On Mon, Nov 20, 2017 at 3:07 PM, Bin Meng <bmeng.cn@gmail.com> wrote: > On Mon, Nov 20, 2017 at 1:30 AM, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >> Enable CONFIG_DISTRO_DEFAULTS in qemu-x86_64_defconfig >> and qemu-x86_defconfig. >> >> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> >> --- >> configs/qemu-x86_64_defconfig | 1 + >> configs/qemu-x86_defconfig | 1 + >> 2 files changed, 2 insertions(+) >> > > Reviewed-by: Bin Meng <bmeng.cn@gmail.com> applied to u-boot-x86, thanks! ^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu 2017-11-20 9:20 ` Bin Meng @ 2017-11-24 8:12 ` Bin Meng 2017-11-29 9:00 ` Bin Meng 0 siblings, 1 reply; 7+ messages in thread From: Bin Meng @ 2017-11-24 8:12 UTC (permalink / raw) To: u-boot Hi Heinrich, On Mon, Nov 20, 2017 at 5:20 PM, Bin Meng <bmeng.cn@gmail.com> wrote: > On Mon, Nov 20, 2017 at 3:07 PM, Bin Meng <bmeng.cn@gmail.com> wrote: >> On Mon, Nov 20, 2017 at 1:30 AM, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >>> Enable CONFIG_DISTRO_DEFAULTS in qemu-x86_64_defconfig >>> and qemu-x86_defconfig. >>> >>> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> >>> --- >>> configs/qemu-x86_64_defconfig | 1 + >>> configs/qemu-x86_defconfig | 1 + >>> 2 files changed, 2 insertions(+) >>> >> >> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> > > applied to u-boot-x86, thanks! Unfortunately, this creates build warnings on QEMU. include/configs/x86-common.h:70:0: warning: "CONFIG_BOOTCOMMAND" redefined #define CONFIG_BOOTCOMMAND \ ^ Can you please post your new patch against u-boot-x86/master that fixes this issue? Regards, Bin ^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu 2017-11-24 8:12 ` Bin Meng @ 2017-11-29 9:00 ` Bin Meng 2017-11-29 18:46 ` Heinrich Schuchardt 0 siblings, 1 reply; 7+ messages in thread From: Bin Meng @ 2017-11-29 9:00 UTC (permalink / raw) To: u-boot Hi Heinrich, On Fri, Nov 24, 2017 at 4:12 PM, Bin Meng <bmeng.cn@gmail.com> wrote: > Hi Heinrich, > > On Mon, Nov 20, 2017 at 5:20 PM, Bin Meng <bmeng.cn@gmail.com> wrote: >> On Mon, Nov 20, 2017 at 3:07 PM, Bin Meng <bmeng.cn@gmail.com> wrote: >>> On Mon, Nov 20, 2017 at 1:30 AM, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >>>> Enable CONFIG_DISTRO_DEFAULTS in qemu-x86_64_defconfig >>>> and qemu-x86_defconfig. >>>> >>>> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> >>>> --- >>>> configs/qemu-x86_64_defconfig | 1 + >>>> configs/qemu-x86_defconfig | 1 + >>>> 2 files changed, 2 insertions(+) >>>> >>> >>> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> >> >> applied to u-boot-x86, thanks! > > Unfortunately, this creates build warnings on QEMU. > > include/configs/x86-common.h:70:0: warning: "CONFIG_BOOTCOMMAND" redefined > #define CONFIG_BOOTCOMMAND \ > ^ > > Can you please post your new patch against u-boot-x86/master that > fixes this issue? Did you get a chance to look at this? Regards, Bin ^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu 2017-11-29 9:00 ` Bin Meng @ 2017-11-29 18:46 ` Heinrich Schuchardt 2017-11-30 3:01 ` Bin Meng 0 siblings, 1 reply; 7+ messages in thread From: Heinrich Schuchardt @ 2017-11-29 18:46 UTC (permalink / raw) To: u-boot On 11/29/2017 10:00 AM, Bin Meng wrote: > Hi Heinrich, > > On Fri, Nov 24, 2017 at 4:12 PM, Bin Meng <bmeng.cn@gmail.com> wrote: >> Hi Heinrich, >> >> On Mon, Nov 20, 2017 at 5:20 PM, Bin Meng <bmeng.cn@gmail.com> wrote: >>> On Mon, Nov 20, 2017 at 3:07 PM, Bin Meng <bmeng.cn@gmail.com> wrote: >>>> On Mon, Nov 20, 2017 at 1:30 AM, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: >>>>> Enable CONFIG_DISTRO_DEFAULTS in qemu-x86_64_defconfig >>>>> and qemu-x86_defconfig. >>>>> >>>>> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> >>>>> --- >>>>> configs/qemu-x86_64_defconfig | 1 + >>>>> configs/qemu-x86_defconfig | 1 + >>>>> 2 files changed, 2 insertions(+) >>>>> >>>> >>>> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> >>> >>> applied to u-boot-x86, thanks! >> >> Unfortunately, this creates build warnings on QEMU. >> >> include/configs/x86-common.h:70:0: warning: "CONFIG_BOOTCOMMAND" redefined >> #define CONFIG_BOOTCOMMAND \ >> ^ >> >> Can you please post your new patch against u-boot-x86/master that >> fixes this issue? > > Did you get a chance to look at this? > > Regards, > Bin > Hello Bin, there seem quite a lot of changes needed to get DISTRO_DEFAUlTS running on x86. It's not only the double definition. Please, remove the patch from your queue. Best regards Heinrich ^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu 2017-11-29 18:46 ` Heinrich Schuchardt @ 2017-11-30 3:01 ` Bin Meng 0 siblings, 0 replies; 7+ messages in thread From: Bin Meng @ 2017-11-30 3:01 UTC (permalink / raw) To: u-boot Hi Heinrich, On Thu, Nov 30, 2017 at 2:46 AM, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote: > > > On 11/29/2017 10:00 AM, Bin Meng wrote: >> >> Hi Heinrich, >> >> On Fri, Nov 24, 2017 at 4:12 PM, Bin Meng <bmeng.cn@gmail.com> wrote: >>> >>> Hi Heinrich, >>> >>> On Mon, Nov 20, 2017 at 5:20 PM, Bin Meng <bmeng.cn@gmail.com> wrote: >>>> >>>> On Mon, Nov 20, 2017 at 3:07 PM, Bin Meng <bmeng.cn@gmail.com> wrote: >>>>> >>>>> On Mon, Nov 20, 2017 at 1:30 AM, Heinrich Schuchardt >>>>> <xypron.glpk@gmx.de> wrote: >>>>>> >>>>>> Enable CONFIG_DISTRO_DEFAULTS in qemu-x86_64_defconfig >>>>>> and qemu-x86_defconfig. >>>>>> >>>>>> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> >>>>>> --- >>>>>> configs/qemu-x86_64_defconfig | 1 + >>>>>> configs/qemu-x86_defconfig | 1 + >>>>>> 2 files changed, 2 insertions(+) >>>>>> >>>>> >>>>> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> >>>> >>>> >>>> applied to u-boot-x86, thanks! >>> >>> >>> Unfortunately, this creates build warnings on QEMU. >>> >>> include/configs/x86-common.h:70:0: warning: "CONFIG_BOOTCOMMAND" >>> redefined >>> #define CONFIG_BOOTCOMMAND \ >>> ^ >>> >>> Can you please post your new patch against u-boot-x86/master that >>> fixes this issue? >> >> >> Did you get a chance to look at this? >> >> Regards, >> Bin >> > Hello Bin, > > there seem quite a lot of changes needed to get DISTRO_DEFAUlTS running on > x86. It's not only the double definition. > > Please, remove the patch from your queue. > Thanks for your confirmation. Regards, Bin ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2017-11-30 3:01 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-11-19 17:30 [U-Boot] [PATCH 1/1] x86: enable DISTRO_DEFAULTS for qemu Heinrich Schuchardt 2017-11-20 7:07 ` Bin Meng 2017-11-20 9:20 ` Bin Meng 2017-11-24 8:12 ` Bin Meng 2017-11-29 9:00 ` Bin Meng 2017-11-29 18:46 ` Heinrich Schuchardt 2017-11-30 3:01 ` Bin Meng
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.