* [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code
@ 2016-05-13 6:29 Miao Yan
2016-05-13 6:29 ` [U-Boot] [PATCH 01/12] x86: qemu: fix ACPI Kconfig options Miao Yan
` (11 more replies)
0 siblings, 12 replies; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
This patchset cleans the QEMU fw_cfg code:
*) split qfw core and qfw command interface
*) split x86 specific operations from qfw core
*) move x86 ACPI generation code into qfw core as this can also
be used by others like ARM64
*) various cleanups
Miao Yan (12):
x86: qemu: fix ACPI Kconfig options
cmd: qfw: add API to iterate firmware list
cmd: qfw: remove qemu_fwcfg_free_files()
cmd: qfw: make fwcfg_present and fwcfg_dma_present public
x86: qemu: split qfw command interface and qfw core
x86: qemu: move x86 specific operations out of qfw core
x86: qemu: add comment about qfw register endianness
cmd: qfw: rename qemu_fw_cfg.[c|h] to qfw.[c|h]
cmd: qfw: workaround qfw build issue
cmd: qfw: do not depend on x86
cmd: qfw: bring ACPI generation code into qfw core
x86: qemu: rename qemu/acpi_table.c
arch/x86/Kconfig | 10 +-
arch/x86/cpu/mp_init.c | 8 +-
arch/x86/cpu/qemu/Makefile | 4 +-
arch/x86/cpu/qemu/acpi_table.c | 243 --------------------------
arch/x86/cpu/qemu/cpu.c | 2 +-
arch/x86/cpu/qemu/e820.c | 43 +++++
arch/x86/cpu/qemu/qemu.c | 52 +++++-
arch/x86/lib/Makefile | 2 +-
cmd/Kconfig | 2 +-
cmd/Makefile | 2 +-
cmd/cmd_qfw.c | 195 +++++++++++++++++++++
cmd/qemu_fw_cfg.c | 343 ------------------------------------
common/Kconfig | 1 +
drivers/misc/Kconfig | 6 +
drivers/misc/Makefile | 1 +
drivers/misc/qfw.c | 387 +++++++++++++++++++++++++++++++++++++++++
include/qemu_fw_cfg.h | 162 -----------------
include/qfw.h | 176 +++++++++++++++++++
18 files changed, 871 insertions(+), 768 deletions(-)
delete mode 100644 arch/x86/cpu/qemu/acpi_table.c
create mode 100644 arch/x86/cpu/qemu/e820.c
create mode 100644 cmd/cmd_qfw.c
delete mode 100644 cmd/qemu_fw_cfg.c
create mode 100644 drivers/misc/qfw.c
delete mode 100644 include/qemu_fw_cfg.h
create mode 100644 include/qfw.h
--
1.9.1
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 01/12] x86: qemu: fix ACPI Kconfig options
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 13:59 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 02/12] cmd: qfw: add API to iterate firmware list Miao Yan
` (10 subsequent siblings)
11 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
CONFIG_GENENRATE_ACPI_TABLE controls the generation of ACPI table which
uses U-Boot's built-in methods and CONFIG_QEMU_ACPI_TABLE controls whether
to load ACPI table from QEMU's fw_cfg interface.
But with commit "697ec431469ce0a4c2fc2c02d8685d907491af84 x86: qemu: Drop
our own ACPI implementation", there is only one way to support ACPI table
for QEMU targets which is the fw_cfg interface. Having two Kconfig options
for this purpose is not necessary any more, so this patch consolidates
the two.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
arch/x86/Kconfig | 10 +---------
arch/x86/cpu/qemu/Makefile | 2 +-
arch/x86/lib/Makefile | 2 +-
3 files changed, 3 insertions(+), 11 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4ef27dc..a60e0da 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -436,21 +436,13 @@ config GENERATE_MP_TABLE
config GENERATE_ACPI_TABLE
bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
default n
+ select QEMU_FW_CFG if QEMU
help
The Advanced Configuration and Power Interface (ACPI) specification
provides an open standard for device configuration and management
by the operating system. It defines platform-independent interfaces
for configuration and power management monitoring.
-config QEMU_ACPI_TABLE
- bool "Load ACPI table from QEMU fw_cfg interface"
- depends on GENERATE_ACPI_TABLE && QEMU
- default y
- help
- By default, U-Boot generates its own ACPI tables. This option, if
- enabled, disables U-Boot's version and loads ACPI tables generated
- by QEMU.
-
config GENERATE_SMBIOS_TABLE
bool "Generate an SMBIOS (System Management BIOS) table"
default y
diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
index 97b965c..43ee4bd 100644
--- a/arch/x86/cpu/qemu/Makefile
+++ b/arch/x86/cpu/qemu/Makefile
@@ -8,4 +8,4 @@ ifndef CONFIG_EFI_STUB
obj-y += car.o dram.o
endif
obj-y += cpu.o qemu.o
-obj-$(CONFIG_QEMU_ACPI_TABLE) += acpi_table.o
+obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index dc90df2..ce5eb82 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -31,7 +31,7 @@ obj-$(CONFIG_X86_RAMTEST) += ramtest.o
obj-y += sfi.o
obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += smbios.o
obj-y += string.o
-ifndef CONFIG_QEMU_ACPI_TABLE
+ifndef CONFIG_QEMU
obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
endif
obj-y += tables.o
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 02/12] cmd: qfw: add API to iterate firmware list
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
2016-05-13 6:29 ` [U-Boot] [PATCH 01/12] x86: qemu: fix ACPI Kconfig options Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 03/12] cmd: qfw: remove qemu_fwcfg_free_files() Miao Yan
` (9 subsequent siblings)
11 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
This patch is part of the refactor work of qfw. It adds 3 APIs to qfw
core to iterate firmware list.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
cmd/qemu_fw_cfg.c | 25 ++++++++++++++++++++++---
include/qemu_fw_cfg.h | 9 +++++++++
2 files changed, 31 insertions(+), 3 deletions(-)
diff --git a/cmd/qemu_fw_cfg.c b/cmd/qemu_fw_cfg.c
index 48ae476..192b7d1 100644
--- a/cmd/qemu_fw_cfg.c
+++ b/cmd/qemu_fw_cfg.c
@@ -229,10 +229,27 @@ void qemu_fwcfg_free_files(void)
}
}
+struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
+{
+ iter->entry = fw_list.next;
+ return list_entry(iter->entry, struct fw_file, list);
+}
+
+struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter)
+{
+ iter->entry = iter->entry->next;
+ return list_entry(iter->entry, struct fw_file, list);
+}
+
+bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
+{
+ return iter->entry == &fw_list;
+}
+
static int qemu_fwcfg_list_firmware(void)
{
int ret;
- struct list_head *entry;
+ struct fw_cfg_file_iter iter;
struct fw_file *file;
/* make sure fw_list is loaded */
@@ -240,8 +257,10 @@ static int qemu_fwcfg_list_firmware(void)
if (ret)
return ret;
- list_for_each(entry, &fw_list) {
- file = list_entry(entry, struct fw_file, list);
+
+ for (file = qemu_fwcfg_file_iter_init(&iter);
+ !qemu_fwcfg_file_iter_end(&iter);
+ file = qemu_fwcfg_file_iter_next(&iter)) {
printf("%-56s\n", file->cfg.name);
}
diff --git a/include/qemu_fw_cfg.h b/include/qemu_fw_cfg.h
index e21f150..19d0ba0 100644
--- a/include/qemu_fw_cfg.h
+++ b/include/qemu_fw_cfg.h
@@ -87,6 +87,10 @@ struct fw_file {
struct list_head list; /* list node to link to fw_list */
};
+struct fw_cfg_file_iter {
+ struct list_head *entry; /* structure to iterate file list */
+};
+
struct fw_cfg_dma_access {
__be32 control;
__be32 length;
@@ -159,4 +163,9 @@ void qemu_fwcfg_free_files(void);
*/
int qemu_fwcfg_online_cpus(void);
+/* helper functions to iterate firmware file list */
+struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter);
+struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter);
+bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter);
+
#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 03/12] cmd: qfw: remove qemu_fwcfg_free_files()
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
2016-05-13 6:29 ` [U-Boot] [PATCH 01/12] x86: qemu: fix ACPI Kconfig options Miao Yan
2016-05-13 6:29 ` [U-Boot] [PATCH 02/12] cmd: qfw: add API to iterate firmware list Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 04/12] cmd: qfw: make fwcfg_present and fwcfg_dma_present public Miao Yan
` (8 subsequent siblings)
11 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
This patch is part of the qfw refactor work.
The qemu_fwcfg_free_files() function is only used in error handling in
ACPI table generation, let's not make this a core function and move it
to the right place.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
arch/x86/cpu/qemu/acpi_table.c | 13 +++++++++++--
cmd/qemu_fw_cfg.c | 12 ------------
include/qemu_fw_cfg.h | 1 -
3 files changed, 11 insertions(+), 15 deletions(-)
diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c
index 49381ac..b17fa03 100644
--- a/arch/x86/cpu/qemu/acpi_table.c
+++ b/arch/x86/cpu/qemu/acpi_table.c
@@ -235,8 +235,17 @@ u32 write_acpi_tables(u32 addr)
}
out:
- if (ret)
- qemu_fwcfg_free_files();
+ if (ret) {
+ struct fw_cfg_file_iter iter;
+ for (file = qemu_fwcfg_file_iter_init(&iter);
+ !qemu_fwcfg_file_iter_end(&iter);
+ file = qemu_fwcfg_file_iter_next(&iter)) {
+ if (file->addr) {
+ free((void *)file->addr);
+ file->addr = 0;
+ }
+ }
+ }
free(table_loader);
return addr;
diff --git a/cmd/qemu_fw_cfg.c b/cmd/qemu_fw_cfg.c
index 192b7d1..9f03ab6 100644
--- a/cmd/qemu_fw_cfg.c
+++ b/cmd/qemu_fw_cfg.c
@@ -217,18 +217,6 @@ struct fw_file *qemu_fwcfg_find_file(const char *name)
return NULL;
}
-void qemu_fwcfg_free_files(void)
-{
- struct fw_file *file;
- struct list_head *list;
-
- list_for_each(list, &fw_list) {
- file = list_entry(list, struct fw_file, list);
- if (file->addr)
- free((void *)file->addr);
- }
-}
-
struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
{
iter->entry = fw_list.next;
diff --git a/include/qemu_fw_cfg.h b/include/qemu_fw_cfg.h
index 19d0ba0..986f4b2 100644
--- a/include/qemu_fw_cfg.h
+++ b/include/qemu_fw_cfg.h
@@ -154,7 +154,6 @@ void qemu_fwcfg_init(void);
void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address);
int qemu_fwcfg_read_firmware_list(void);
struct fw_file *qemu_fwcfg_find_file(const char *name);
-void qemu_fwcfg_free_files(void);
/**
* Get system cpu number
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 04/12] cmd: qfw: make fwcfg_present and fwcfg_dma_present public
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
` (2 preceding siblings ...)
2016-05-13 6:29 ` [U-Boot] [PATCH 03/12] cmd: qfw: remove qemu_fwcfg_free_files() Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core Miao Yan
` (7 subsequent siblings)
11 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
This patch is part of the qfw refactor work. This patch makes
qemu_fwcfg_present() and qemu_fwcfg_dma_present() public functions.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
cmd/qemu_fw_cfg.c | 37 ++++++++++++++++++++-----------------
include/qemu_fw_cfg.h | 3 +++
2 files changed, 23 insertions(+), 17 deletions(-)
diff --git a/cmd/qemu_fw_cfg.c b/cmd/qemu_fw_cfg.c
index 9f03ab6..aab6b1a 100644
--- a/cmd/qemu_fw_cfg.c
+++ b/cmd/qemu_fw_cfg.c
@@ -62,23 +62,14 @@ static void qemu_fwcfg_read_entry_dma(uint16_t entry,
__asm__ __volatile__ ("pause");
}
-static bool qemu_fwcfg_present(void)
+bool qemu_fwcfg_present(void)
{
- uint32_t qemu;
-
- qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
- return be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE;
+ return fwcfg_present;
}
-static bool qemu_fwcfg_dma_present(void)
+bool qemu_fwcfg_dma_present(void)
{
- uint8_t dma_enabled;
-
- qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
- if (dma_enabled & FW_CFG_DMA_ENABLED)
- return true;
-
- return false;
+ return fwcfg_dma_present;
}
void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
@@ -257,9 +248,21 @@ static int qemu_fwcfg_list_firmware(void)
void qemu_fwcfg_init(void)
{
- fwcfg_present = qemu_fwcfg_present();
- if (fwcfg_present)
- fwcfg_dma_present = qemu_fwcfg_dma_present();
+ uint32_t qemu;
+ uint32_t dma_enabled;
+
+ fwcfg_present = false;
+ fwcfg_dma_present = false;
+
+ qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
+ if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
+ fwcfg_present = true;
+
+ if (fwcfg_present) {
+ qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
+ if (dma_enabled & FW_CFG_DMA_ENABLED)
+ fwcfg_dma_present = true;
+ }
}
static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
@@ -323,7 +326,7 @@ static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
int ret;
cmd_tbl_t *fwcfg_cmd;
- if (!fwcfg_present) {
+ if (!qemu_fwcfg_present()) {
printf("QEMU fw_cfg interface not found\n");
return CMD_RET_USAGE;
}
diff --git a/include/qemu_fw_cfg.h b/include/qemu_fw_cfg.h
index 986f4b2..f718e09 100644
--- a/include/qemu_fw_cfg.h
+++ b/include/qemu_fw_cfg.h
@@ -167,4 +167,7 @@ struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter);
struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter);
bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter);
+bool qemu_fwcfg_present(void);
+bool qemu_fwcfg_dma_present(void);
+
#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
` (3 preceding siblings ...)
2016-05-13 6:29 ` [U-Boot] [PATCH 04/12] cmd: qfw: make fwcfg_present and fwcfg_dma_present public Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-16 8:47 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 06/12] x86: qemu: move x86 specific operations out of " Miao Yan
` (6 subsequent siblings)
11 siblings, 2 replies; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
This patch splits qfw command interface and qfw core function into two
files, and introduces a new Kconfig option (CONFIG_QFW). for
qfw core.
Now when qfw command interface is enabled, it will automatically select
qfw core. This patch also makes the ACPI table generation select
CONFIG_QFW.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
arch/x86/Kconfig | 2 +-
arch/x86/cpu/mp_init.c | 6 +-
arch/x86/cpu/qemu/Makefile | 3 +-
arch/x86/cpu/qemu/acpi_table.c | 2 +
arch/x86/cpu/qemu/qemu.c | 4 +
cmd/Kconfig | 1 +
cmd/Makefile | 2 +-
cmd/cmd_qfw.c | 182 +++++++++++++++++++++
cmd/qemu_fw_cfg.c | 353 -----------------------------------------
common/Kconfig | 1 +
drivers/misc/Kconfig | 6 +
drivers/misc/Makefile | 1 +
drivers/misc/qemu_fw_cfg.c | 185 +++++++++++++++++++++
13 files changed, 390 insertions(+), 358 deletions(-)
create mode 100644 cmd/cmd_qfw.c
delete mode 100644 cmd/qemu_fw_cfg.c
create mode 100644 drivers/misc/qemu_fw_cfg.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a60e0da..2f63170 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -436,7 +436,7 @@ config GENERATE_MP_TABLE
config GENERATE_ACPI_TABLE
bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
default n
- select QEMU_FW_CFG if QEMU
+ select QFW if QEMU
help
The Advanced Configuration and Power Interface (ACPI) specification
provides an open standard for device configuration and management
diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
index 13bec7a..109b3d7 100644
--- a/arch/x86/cpu/mp_init.c
+++ b/arch/x86/cpu/mp_init.c
@@ -11,7 +11,9 @@
#include <dm.h>
#include <errno.h>
#include <malloc.h>
+#ifdef CONFIG_QFW
#include <qemu_fw_cfg.h>
+#endif
#include <asm/atomic.h>
#include <asm/cpu.h>
#include <asm/interrupt.h>
@@ -420,7 +422,7 @@ static int init_bsp(struct udevice **devp)
return 0;
}
-#ifdef CONFIG_QEMU
+#ifdef CONFIG_QFW
static int qemu_cpu_fixup(void)
{
int ret;
@@ -496,7 +498,7 @@ int mp_init(struct mp_params *p)
if (ret)
return ret;
-#ifdef CONFIG_QEMU
+#ifdef CONFIG_QFW
ret = qemu_cpu_fixup();
if (ret)
return ret;
diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
index 43ee4bd..7c08c3d 100644
--- a/arch/x86/cpu/qemu/Makefile
+++ b/arch/x86/cpu/qemu/Makefile
@@ -7,5 +7,6 @@
ifndef CONFIG_EFI_STUB
obj-y += car.o dram.o
endif
-obj-y += cpu.o qemu.o
+obj-y += qemu.o
+obj-$(CONFIG_QFW) += cpu.o
obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c
index b17fa03..4584fc7 100644
--- a/arch/x86/cpu/qemu/acpi_table.c
+++ b/arch/x86/cpu/qemu/acpi_table.c
@@ -8,7 +8,9 @@
#include <command.h>
#include <errno.h>
#include <malloc.h>
+#ifdef CONFIG_QFW
#include <qemu_fw_cfg.h>
+#endif
#include <asm/io.h>
#include <asm/tables.h>
#include <asm/e820.h>
diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c
index b41e4ec..2631e99 100644
--- a/arch/x86/cpu/qemu/qemu.c
+++ b/arch/x86/cpu/qemu/qemu.c
@@ -6,7 +6,9 @@
#include <common.h>
#include <pci.h>
+#ifdef CONFIG_QFW
#include <qemu_fw_cfg.h>
+#endif
#include <asm/irq.h>
#include <asm/post.h>
#include <asm/processor.h>
@@ -88,7 +90,9 @@ static void qemu_chipset_init(void)
enable_pm_ich9();
}
+#ifdef CONFIG_QFW
qemu_fwcfg_init();
+#endif
}
int arch_cpu_init(void)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index c0fffe3..08b761f 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -596,6 +596,7 @@ config CMD_SOUND
config CMD_QEMU_FW_CFG
bool "qfw"
depends on X86
+ select QFW
help
This provides access to the QEMU firmware interface. The main
feature is to allow easy loading of files passed to qemu-system
diff --git a/cmd/Makefile b/cmd/Makefile
index f99e67d..31e4da7 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -105,7 +105,7 @@ endif
obj-y += pcmcia.o
obj-$(CONFIG_CMD_PORTIO) += portio.o
obj-$(CONFIG_CMD_PXE) += pxe.o
-obj-$(CONFIG_CMD_QEMU_FW_CFG) += qemu_fw_cfg.o
+obj-$(CONFIG_CMD_QEMU_FW_CFG) += cmd_qfw.o
obj-$(CONFIG_CMD_READ) += read.o
obj-$(CONFIG_CMD_REGINFO) += reginfo.o
obj-$(CONFIG_CMD_REISER) += reiser.o
diff --git a/cmd/cmd_qfw.c b/cmd/cmd_qfw.c
new file mode 100644
index 0000000..eefaf65
--- /dev/null
+++ b/cmd/cmd_qfw.c
@@ -0,0 +1,182 @@
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <qemu_fw_cfg.h>
+
+/*
+ * This function prepares kernel for zboot. It loads kernel data
+ * to 'load_addr', initrd to 'initrd_addr' and kernel command
+ * line using qemu fw_cfg interface.
+ */
+static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
+{
+ char *data_addr;
+ uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
+
+ qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
+ qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
+
+ if (setup_size == 0 || kernel_size == 0) {
+ printf("warning: no kernel available\n");
+ return -1;
+ }
+
+ data_addr = load_addr;
+ qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
+ le32_to_cpu(setup_size), data_addr);
+ data_addr += le32_to_cpu(setup_size);
+
+ qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
+ le32_to_cpu(kernel_size), data_addr);
+ data_addr += le32_to_cpu(kernel_size);
+
+ data_addr = initrd_addr;
+ qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
+ if (initrd_size == 0) {
+ printf("warning: no initrd available\n");
+ } else {
+ qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
+ le32_to_cpu(initrd_size), data_addr);
+ data_addr += le32_to_cpu(initrd_size);
+ }
+
+ qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
+ if (cmdline_size) {
+ qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
+ le32_to_cpu(cmdline_size), data_addr);
+ /*
+ * if kernel cmdline only contains '\0', (e.g. no -append
+ * when invoking qemu), do not update bootargs
+ */
+ if (*data_addr != '\0') {
+ if (setenv("bootargs", data_addr) < 0)
+ printf("warning: unable to change bootargs\n");
+ }
+ }
+
+ printf("loading kernel to address %p size %x", load_addr,
+ le32_to_cpu(kernel_size));
+ if (initrd_size)
+ printf(" initrd %p size %x\n",
+ initrd_addr,
+ le32_to_cpu(initrd_size));
+ else
+ printf("\n");
+
+ return 0;
+}
+
+static int qemu_fwcfg_list_firmware(void)
+{
+ int ret;
+ struct fw_cfg_file_iter iter;
+ struct fw_file *file;
+
+ /* make sure fw_list is loaded */
+ ret = qemu_fwcfg_read_firmware_list();
+ if (ret)
+ return ret;
+
+
+ for (file = qemu_fwcfg_file_iter_init(&iter);
+ !qemu_fwcfg_file_iter_end(&iter);
+ file = qemu_fwcfg_file_iter_next(&iter)) {
+ printf("%-56s\n", file->cfg.name);
+ }
+
+ return 0;
+}
+
+static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ if (qemu_fwcfg_list_firmware() < 0)
+ return CMD_RET_FAILURE;
+
+ return 0;
+}
+
+static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ int ret = qemu_fwcfg_online_cpus();
+ if (ret < 0) {
+ printf("QEMU fw_cfg interface not found\n");
+ return CMD_RET_FAILURE;
+ }
+
+ printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
+
+ return 0;
+}
+
+static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
+ int argc, char * const argv[])
+{
+ char *env;
+ void *load_addr;
+ void *initrd_addr;
+
+ env = getenv("loadaddr");
+ load_addr = env ?
+ (void *)simple_strtoul(env, NULL, 16) :
+ (void *)CONFIG_LOADADDR;
+
+ env = getenv("ramdiskaddr");
+ initrd_addr = env ?
+ (void *)simple_strtoul(env, NULL, 16) :
+ (void *)CONFIG_RAMDISK_ADDR;
+
+ if (argc == 2) {
+ load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+ initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
+ } else if (argc == 1) {
+ load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
+ }
+
+ return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
+}
+
+static cmd_tbl_t fwcfg_commands[] = {
+ U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
+ U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
+ U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
+};
+
+static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int ret;
+ cmd_tbl_t *fwcfg_cmd;
+
+ if (!qemu_fwcfg_present()) {
+ printf("QEMU fw_cfg interface not found\n");
+ return CMD_RET_USAGE;
+ }
+
+ fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
+ ARRAY_SIZE(fwcfg_commands));
+ argc -= 2;
+ argv += 2;
+ if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
+ return CMD_RET_USAGE;
+
+ ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
+
+ return cmd_process_error(fwcfg_cmd, ret);
+}
+
+U_BOOT_CMD(
+ qfw, 4, 1, do_qemu_fw,
+ "QEMU firmware interface",
+ "<command>\n"
+ " - list : print firmware(s) currently loaded\n"
+ " - cpus : print online cpu number\n"
+ " - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
+)
+
diff --git a/cmd/qemu_fw_cfg.c b/cmd/qemu_fw_cfg.c
deleted file mode 100644
index aab6b1a..0000000
--- a/cmd/qemu_fw_cfg.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <errno.h>
-#include <malloc.h>
-#include <qemu_fw_cfg.h>
-#include <asm/io.h>
-#include <linux/list.h>
-
-static bool fwcfg_present;
-static bool fwcfg_dma_present;
-
-static LIST_HEAD(fw_list);
-
-/* Read configuration item using fw_cfg PIO interface */
-static void qemu_fwcfg_read_entry_pio(uint16_t entry,
- uint32_t size, void *address)
-{
- uint32_t i = 0;
- uint8_t *data = address;
-
- /*
- * writting FW_CFG_INVALID will cause read operation to resume at
- * last offset, otherwise read will start at offset 0
- */
- if (entry != FW_CFG_INVALID)
- outw(entry, FW_CONTROL_PORT);
- while (size--)
- data[i++] = inb(FW_DATA_PORT);
-}
-
-/* Read configuration item using fw_cfg DMA interface */
-static void qemu_fwcfg_read_entry_dma(uint16_t entry,
- uint32_t size, void *address)
-{
- struct fw_cfg_dma_access dma;
-
- dma.length = cpu_to_be32(size);
- dma.address = cpu_to_be64((uintptr_t)address);
- dma.control = cpu_to_be32(FW_CFG_DMA_READ);
-
- /*
- * writting FW_CFG_INVALID will cause read operation to resume at
- * last offset, otherwise read will start at offset 0
- */
- if (entry != FW_CFG_INVALID)
- dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
-
- barrier();
-
- debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
- address, size, be32_to_cpu(dma.control));
-
- outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
-
- while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
- __asm__ __volatile__ ("pause");
-}
-
-bool qemu_fwcfg_present(void)
-{
- return fwcfg_present;
-}
-
-bool qemu_fwcfg_dma_present(void)
-{
- return fwcfg_dma_present;
-}
-
-void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
-{
- if (fwcfg_dma_present)
- qemu_fwcfg_read_entry_dma(entry, length, address);
- else
- qemu_fwcfg_read_entry_pio(entry, length, address);
-}
-
-int qemu_fwcfg_online_cpus(void)
-{
- uint16_t nb_cpus;
-
- if (!fwcfg_present)
- return -ENODEV;
-
- qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
-
- return le16_to_cpu(nb_cpus);
-}
-
-/*
- * This function prepares kernel for zboot. It loads kernel data
- * to 'load_addr', initrd to 'initrd_addr' and kernel command
- * line using qemu fw_cfg interface.
- */
-static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
-{
- char *data_addr;
- uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
-
- qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
- qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
-
- if (setup_size == 0 || kernel_size == 0) {
- printf("warning: no kernel available\n");
- return -1;
- }
-
- data_addr = load_addr;
- qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
- le32_to_cpu(setup_size), data_addr);
- data_addr += le32_to_cpu(setup_size);
-
- qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
- le32_to_cpu(kernel_size), data_addr);
- data_addr += le32_to_cpu(kernel_size);
-
- data_addr = initrd_addr;
- qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
- if (initrd_size == 0) {
- printf("warning: no initrd available\n");
- } else {
- qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
- le32_to_cpu(initrd_size), data_addr);
- data_addr += le32_to_cpu(initrd_size);
- }
-
- qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
- if (cmdline_size) {
- qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
- le32_to_cpu(cmdline_size), data_addr);
- /*
- * if kernel cmdline only contains '\0', (e.g. no -append
- * when invoking qemu), do not update bootargs
- */
- if (*data_addr != '\0') {
- if (setenv("bootargs", data_addr) < 0)
- printf("warning: unable to change bootargs\n");
- }
- }
-
- printf("loading kernel to address %p size %x", load_addr,
- le32_to_cpu(kernel_size));
- if (initrd_size)
- printf(" initrd %p size %x\n",
- initrd_addr,
- le32_to_cpu(initrd_size));
- else
- printf("\n");
-
- return 0;
-}
-
-int qemu_fwcfg_read_firmware_list(void)
-{
- int i;
- uint32_t count;
- struct fw_file *file;
- struct list_head *entry;
-
- /* don't read it twice */
- if (!list_empty(&fw_list))
- return 0;
-
- qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
- if (!count)
- return 0;
-
- count = be32_to_cpu(count);
- for (i = 0; i < count; i++) {
- file = malloc(sizeof(*file));
- if (!file) {
- printf("error: allocating resource\n");
- goto err;
- }
- qemu_fwcfg_read_entry(FW_CFG_INVALID,
- sizeof(struct fw_cfg_file), &file->cfg);
- file->addr = 0;
- list_add_tail(&file->list, &fw_list);
- }
-
- return 0;
-
-err:
- list_for_each(entry, &fw_list) {
- file = list_entry(entry, struct fw_file, list);
- free(file);
- }
-
- return -ENOMEM;
-}
-
-struct fw_file *qemu_fwcfg_find_file(const char *name)
-{
- struct list_head *entry;
- struct fw_file *file;
-
- list_for_each(entry, &fw_list) {
- file = list_entry(entry, struct fw_file, list);
- if (!strcmp(file->cfg.name, name))
- return file;
- }
-
- return NULL;
-}
-
-struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
-{
- iter->entry = fw_list.next;
- return list_entry(iter->entry, struct fw_file, list);
-}
-
-struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter)
-{
- iter->entry = iter->entry->next;
- return list_entry(iter->entry, struct fw_file, list);
-}
-
-bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
-{
- return iter->entry == &fw_list;
-}
-
-static int qemu_fwcfg_list_firmware(void)
-{
- int ret;
- struct fw_cfg_file_iter iter;
- struct fw_file *file;
-
- /* make sure fw_list is loaded */
- ret = qemu_fwcfg_read_firmware_list();
- if (ret)
- return ret;
-
-
- for (file = qemu_fwcfg_file_iter_init(&iter);
- !qemu_fwcfg_file_iter_end(&iter);
- file = qemu_fwcfg_file_iter_next(&iter)) {
- printf("%-56s\n", file->cfg.name);
- }
-
- return 0;
-}
-
-void qemu_fwcfg_init(void)
-{
- uint32_t qemu;
- uint32_t dma_enabled;
-
- fwcfg_present = false;
- fwcfg_dma_present = false;
-
- qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
- if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
- fwcfg_present = true;
-
- if (fwcfg_present) {
- qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
- if (dma_enabled & FW_CFG_DMA_ENABLED)
- fwcfg_dma_present = true;
- }
-}
-
-static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[])
-{
- if (qemu_fwcfg_list_firmware() < 0)
- return CMD_RET_FAILURE;
-
- return 0;
-}
-
-static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[])
-{
- int ret = qemu_fwcfg_online_cpus();
- if (ret < 0) {
- printf("QEMU fw_cfg interface not found\n");
- return CMD_RET_FAILURE;
- }
-
- printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
-
- return 0;
-}
-
-static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
- int argc, char * const argv[])
-{
- char *env;
- void *load_addr;
- void *initrd_addr;
-
- env = getenv("loadaddr");
- load_addr = env ?
- (void *)simple_strtoul(env, NULL, 16) :
- (void *)CONFIG_LOADADDR;
-
- env = getenv("ramdiskaddr");
- initrd_addr = env ?
- (void *)simple_strtoul(env, NULL, 16) :
- (void *)CONFIG_RAMDISK_ADDR;
-
- if (argc == 2) {
- load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
- initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
- } else if (argc == 1) {
- load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
- }
-
- return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
-}
-
-static cmd_tbl_t fwcfg_commands[] = {
- U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
- U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
- U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
-};
-
-static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int ret;
- cmd_tbl_t *fwcfg_cmd;
-
- if (!qemu_fwcfg_present()) {
- printf("QEMU fw_cfg interface not found\n");
- return CMD_RET_USAGE;
- }
-
- fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
- ARRAY_SIZE(fwcfg_commands));
- argc -= 2;
- argv += 2;
- if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
- return CMD_RET_USAGE;
-
- ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
-
- return cmd_process_error(fwcfg_cmd, ret);
-}
-
-U_BOOT_CMD(
- qfw, 4, 1, do_qemu_fw,
- "QEMU firmware interface",
- "<command>\n"
- " - list : print firmware(s) currently loaded\n"
- " - cpus : print online cpu number\n"
- " - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
-)
diff --git a/common/Kconfig b/common/Kconfig
index 067545d..8ca5a68 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -124,3 +124,4 @@ config CONSOLE_RECORD_IN_SIZE
tstc() and getc() will use this in preference to real device input.
The buffer is allocated immediately after the malloc() region is
ready.
+
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index af8667f..fa53700 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -138,4 +138,10 @@ config WINBOND_W83627
legacy UART or other devices in the Winbond Super IO chips
on X86 platforms.
+config QFW
+ bool
+ help
+ Hidden option to enable QEMU fw_cfg interface. This will be selected by
+ either CONFIG_CMD_QEMU_FW_CFG or CONFIG_GENERATE_ACPI_TABLE.
+
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 5969d34..4893086 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -43,3 +43,4 @@ obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
obj-$(CONFIG_RESET) += reset-uclass.o
obj-$(CONFIG_FSL_DEVICE_DISABLE) += fsl_devdis.o
obj-$(CONFIG_WINBOND_W83627) += winbond_w83627.o
+obj-$(CONFIG_QFW) += qemu_fw_cfg.o
diff --git a/drivers/misc/qemu_fw_cfg.c b/drivers/misc/qemu_fw_cfg.c
new file mode 100644
index 0000000..e726059
--- /dev/null
+++ b/drivers/misc/qemu_fw_cfg.c
@@ -0,0 +1,185 @@
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <qemu_fw_cfg.h>
+#include <asm/io.h>
+#include <linux/list.h>
+
+static bool fwcfg_present;
+static bool fwcfg_dma_present;
+
+static LIST_HEAD(fw_list);
+
+/* Read configuration item using fw_cfg PIO interface */
+static void qemu_fwcfg_read_entry_pio(uint16_t entry,
+ uint32_t size, void *address)
+{
+ uint32_t i = 0;
+ uint8_t *data = address;
+
+ /*
+ * writting FW_CFG_INVALID will cause read operation to resume at
+ * last offset, otherwise read will start at offset 0
+ */
+ if (entry != FW_CFG_INVALID)
+ outw(entry, FW_CONTROL_PORT);
+ while (size--)
+ data[i++] = inb(FW_DATA_PORT);
+}
+
+/* Read configuration item using fw_cfg DMA interface */
+static void qemu_fwcfg_read_entry_dma(uint16_t entry,
+ uint32_t size, void *address)
+{
+ struct fw_cfg_dma_access dma;
+
+ dma.length = cpu_to_be32(size);
+ dma.address = cpu_to_be64((uintptr_t)address);
+ dma.control = cpu_to_be32(FW_CFG_DMA_READ);
+
+ /*
+ * writting FW_CFG_INVALID will cause read operation to resume at
+ * last offset, otherwise read will start at offset 0
+ */
+ if (entry != FW_CFG_INVALID)
+ dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
+
+ barrier();
+
+ debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
+ address, size, be32_to_cpu(dma.control));
+
+ outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
+
+ while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
+ __asm__ __volatile__ ("pause");
+}
+
+bool qemu_fwcfg_present(void)
+{
+ return fwcfg_present;
+}
+
+bool qemu_fwcfg_dma_present(void)
+{
+ return fwcfg_dma_present;
+}
+
+void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
+{
+ if (fwcfg_dma_present)
+ qemu_fwcfg_read_entry_dma(entry, length, address);
+ else
+ qemu_fwcfg_read_entry_pio(entry, length, address);
+}
+
+int qemu_fwcfg_online_cpus(void)
+{
+ uint16_t nb_cpus;
+
+ if (!fwcfg_present)
+ return -ENODEV;
+
+ qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
+
+ return le16_to_cpu(nb_cpus);
+}
+
+int qemu_fwcfg_read_firmware_list(void)
+{
+ int i;
+ uint32_t count;
+ struct fw_file *file;
+ struct list_head *entry;
+
+ /* don't read it twice */
+ if (!list_empty(&fw_list))
+ return 0;
+
+ qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
+ if (!count)
+ return 0;
+
+ count = be32_to_cpu(count);
+ for (i = 0; i < count; i++) {
+ file = malloc(sizeof(*file));
+ if (!file) {
+ printf("error: allocating resource\n");
+ goto err;
+ }
+ qemu_fwcfg_read_entry(FW_CFG_INVALID,
+ sizeof(struct fw_cfg_file), &file->cfg);
+ file->addr = 0;
+ list_add_tail(&file->list, &fw_list);
+ }
+
+ return 0;
+
+err:
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ free(file);
+ }
+
+ return -ENOMEM;
+}
+
+struct fw_file *qemu_fwcfg_find_file(const char *name)
+{
+ struct list_head *entry;
+ struct fw_file *file;
+
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ if (!strcmp(file->cfg.name, name))
+ return file;
+ }
+
+ return NULL;
+}
+
+struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
+{
+ iter->entry = fw_list.next;
+ return list_entry((struct list_head *)iter->entry,
+ struct fw_file, list);
+}
+
+struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter)
+{
+ iter->entry = ((struct list_head *)iter->entry)->next;
+ return list_entry((struct list_head *)iter->entry,
+ struct fw_file, list);
+}
+
+bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
+{
+ return iter->entry == &fw_list;
+}
+
+void qemu_fwcfg_init(void)
+{
+ uint32_t qemu;
+ uint32_t dma_enabled;
+
+ fwcfg_present = false;
+ fwcfg_dma_present = false;
+
+ qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
+ if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
+ fwcfg_present = true;
+
+ if (fwcfg_present) {
+ qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
+ if (dma_enabled & FW_CFG_DMA_ENABLED)
+ fwcfg_dma_present = true;
+ }
+}
+
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 06/12] x86: qemu: move x86 specific operations out of qfw core
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
` (4 preceding siblings ...)
2016-05-13 6:29 ` [U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 07/12] x86: qemu: add comment about qfw register endianness Miao Yan
` (5 subsequent siblings)
11 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
The original implementation of qfw includes several x86 specific
operations, like directly calling outb/inb and using some inline
assembly code which prevents it being ported to other architectures.
This patch adds callback functions and moves those to arch/x86/
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
arch/x86/cpu/qemu/qemu.c | 39 ++++++++++++++++++++++++++++++++++++++-
drivers/misc/qemu_fw_cfg.c | 30 +++++++++++++-----------------
include/qemu_fw_cfg.h | 15 +++++++++------
3 files changed, 60 insertions(+), 24 deletions(-)
diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c
index 2631e99..d964283 100644
--- a/arch/x86/cpu/qemu/qemu.c
+++ b/arch/x86/cpu/qemu/qemu.c
@@ -17,6 +17,43 @@
static bool i440fx;
+#ifdef CONFIG_QFW
+
+#define FW_CONTROL_PORT 0x510
+#define FW_DATA_PORT 0x511
+#define FW_DMA_PORT_LOW 0x514
+#define FW_DMA_PORT_HIGH 0x518
+
+static void qemu_x86_fwcfg_read_entry_pio(uint16_t entry,
+ uint32_t size, void *address)
+{
+ uint32_t i = 0;
+ uint8_t *data = address;
+
+ /*
+ * writting FW_CFG_INVALID will cause read operation to resume at
+ * last offset, otherwise read will start at offset 0
+ */
+ if (entry != FW_CFG_INVALID)
+ outw(entry, FW_CONTROL_PORT);
+ while (size--)
+ data[i++] = inb(FW_DATA_PORT);
+}
+
+static void qemu_x86_fwcfg_read_entry_dma(struct fw_cfg_dma_access *dma)
+{
+ outl(cpu_to_be32((uint32_t)dma), FW_DMA_PORT_HIGH);
+
+ while (be32_to_cpu(dma->control) & ~FW_CFG_DMA_ERROR)
+ __asm__ __volatile__ ("pause");
+}
+
+static struct fw_cfg_arch_ops fwcfg_x86_ops = {
+ .arch_read_pio = qemu_x86_fwcfg_read_entry_pio,
+ .arch_read_dma = qemu_x86_fwcfg_read_entry_dma
+};
+#endif
+
static void enable_pm_piix(void)
{
u8 en;
@@ -91,7 +128,7 @@ static void qemu_chipset_init(void)
}
#ifdef CONFIG_QFW
- qemu_fwcfg_init();
+ qemu_fwcfg_init(&fwcfg_x86_ops);
#endif
}
diff --git a/drivers/misc/qemu_fw_cfg.c b/drivers/misc/qemu_fw_cfg.c
index e726059..0700641 100644
--- a/drivers/misc/qemu_fw_cfg.c
+++ b/drivers/misc/qemu_fw_cfg.c
@@ -14,6 +14,7 @@
static bool fwcfg_present;
static bool fwcfg_dma_present;
+static struct fw_cfg_arch_ops *fwcfg_arch_ops;
static LIST_HEAD(fw_list);
@@ -21,17 +22,10 @@ static LIST_HEAD(fw_list);
static void qemu_fwcfg_read_entry_pio(uint16_t entry,
uint32_t size, void *address)
{
- uint32_t i = 0;
- uint8_t *data = address;
+ debug("qemu_fwcfg_read_entry_pio: entry 0x%x, size %u address %p\n",
+ entry, size, address);
- /*
- * writting FW_CFG_INVALID will cause read operation to resume at
- * last offset, otherwise read will start at offset 0
- */
- if (entry != FW_CFG_INVALID)
- outw(entry, FW_CONTROL_PORT);
- while (size--)
- data[i++] = inb(FW_DATA_PORT);
+ return fwcfg_arch_ops->arch_read_pio(entry, size, address);
}
/* Read configuration item using fw_cfg DMA interface */
@@ -53,13 +47,10 @@ static void qemu_fwcfg_read_entry_dma(uint16_t entry,
barrier();
- debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
- address, size, be32_to_cpu(dma.control));
-
- outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
+ debug("qemu_fwcfg_read_entry_dma: entry 0x%x, size %u address %p, control 0x%x\n",
+ entry, size, address, be32_to_cpu(dma.control));
- while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
- __asm__ __volatile__ ("pause");
+ fwcfg_arch_ops->arch_read_dma(&dma);
}
bool qemu_fwcfg_present(void)
@@ -164,13 +155,18 @@ bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
return iter->entry == &fw_list;
}
-void qemu_fwcfg_init(void)
+void qemu_fwcfg_init(struct fw_cfg_arch_ops *ops)
{
uint32_t qemu;
uint32_t dma_enabled;
fwcfg_present = false;
fwcfg_dma_present = false;
+ fwcfg_arch_ops = NULL;
+
+ if (!ops || !ops->arch_read_pio || !ops->arch_read_dma)
+ return;
+ fwcfg_arch_ops = ops;
qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
diff --git a/include/qemu_fw_cfg.h b/include/qemu_fw_cfg.h
index f718e09..b0b3b59 100644
--- a/include/qemu_fw_cfg.h
+++ b/include/qemu_fw_cfg.h
@@ -7,11 +7,6 @@
#ifndef __FW_CFG__
#define __FW_CFG__
-#define FW_CONTROL_PORT 0x510
-#define FW_DATA_PORT 0x511
-#define FW_DMA_PORT_LOW 0x514
-#define FW_DMA_PORT_HIGH 0x518
-
#include <linux/list.h>
enum qemu_fwcfg_items {
@@ -97,6 +92,12 @@ struct fw_cfg_dma_access {
__be64 address;
};
+struct fw_cfg_arch_ops {
+ void (*arch_read_pio)(uint16_t selector, uint32_t size,
+ void *address);
+ void (*arch_read_dma)(struct fw_cfg_dma_access *dma);
+};
+
struct bios_linker_entry {
__le32 command;
union {
@@ -148,8 +149,10 @@ struct bios_linker_entry {
/**
* Initialize QEMU fw_cfg interface
+ *
+ * @ops: arch specific read operations
*/
-void qemu_fwcfg_init(void);
+void qemu_fwcfg_init(struct fw_cfg_arch_ops *ops);
void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address);
int qemu_fwcfg_read_firmware_list(void);
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 07/12] x86: qemu: add comment about qfw register endianness
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
` (5 preceding siblings ...)
2016-05-13 6:29 ` [U-Boot] [PATCH 06/12] x86: qemu: move x86 specific operations out of " Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 08/12] cmd: qfw: rename qemu_fw_cfg.[c|h] to qfw.[c|h] Miao Yan
` (4 subsequent siblings)
11 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
This patch adds some comments about qfw register endianness for clarity.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
arch/x86/cpu/qemu/qemu.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c
index d964283..716a0ac 100644
--- a/arch/x86/cpu/qemu/qemu.c
+++ b/arch/x86/cpu/qemu/qemu.c
@@ -19,6 +19,7 @@ static bool i440fx;
#ifdef CONFIG_QFW
+/* on x86, the qfw registers are all IO ports */
#define FW_CONTROL_PORT 0x510
#define FW_DATA_PORT 0x511
#define FW_DMA_PORT_LOW 0x514
@@ -33,15 +34,21 @@ static void qemu_x86_fwcfg_read_entry_pio(uint16_t entry,
/*
* writting FW_CFG_INVALID will cause read operation to resume at
* last offset, otherwise read will start at offset 0
+ *
+ * Note: on platform where the control register is IO port, the
+ * endianness is little endian.
*/
if (entry != FW_CFG_INVALID)
- outw(entry, FW_CONTROL_PORT);
+ outw(cpu_to_le16(entry), FW_CONTROL_PORT);
+
+ /* the endianness of data register is string-preserving */
while (size--)
data[i++] = inb(FW_DATA_PORT);
}
static void qemu_x86_fwcfg_read_entry_dma(struct fw_cfg_dma_access *dma)
{
+ /* the DMA address register is big endian */
outl(cpu_to_be32((uint32_t)dma), FW_DMA_PORT_HIGH);
while (be32_to_cpu(dma->control) & ~FW_CFG_DMA_ERROR)
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 08/12] cmd: qfw: rename qemu_fw_cfg.[c|h] to qfw.[c|h]
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
` (6 preceding siblings ...)
2016-05-13 6:29 ` [U-Boot] [PATCH 07/12] x86: qemu: add comment about qfw register endianness Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 09/12] cmd: qfw: workaround qfw build issue Miao Yan
` (3 subsequent siblings)
11 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
Make file names aligned with CONFIG_QFW
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
arch/x86/cpu/mp_init.c | 2 +-
arch/x86/cpu/qemu/acpi_table.c | 2 +-
arch/x86/cpu/qemu/cpu.c | 2 +-
arch/x86/cpu/qemu/qemu.c | 2 +-
cmd/cmd_qfw.c | 2 +-
drivers/misc/Makefile | 2 +-
drivers/misc/qemu_fw_cfg.c | 181 -----------------------------------------
drivers/misc/qfw.c | 181 +++++++++++++++++++++++++++++++++++++++++
include/qemu_fw_cfg.h | 176 ---------------------------------------
include/qfw.h | 176 +++++++++++++++++++++++++++++++++++++++
10 files changed, 363 insertions(+), 363 deletions(-)
delete mode 100644 drivers/misc/qemu_fw_cfg.c
create mode 100644 drivers/misc/qfw.c
delete mode 100644 include/qemu_fw_cfg.h
create mode 100644 include/qfw.h
diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
index 109b3d7..54285fa 100644
--- a/arch/x86/cpu/mp_init.c
+++ b/arch/x86/cpu/mp_init.c
@@ -12,7 +12,7 @@
#include <errno.h>
#include <malloc.h>
#ifdef CONFIG_QFW
-#include <qemu_fw_cfg.h>
+#include <qfw.h>
#endif
#include <asm/atomic.h>
#include <asm/cpu.h>
diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c
index 4584fc7..0c54b80 100644
--- a/arch/x86/cpu/qemu/acpi_table.c
+++ b/arch/x86/cpu/qemu/acpi_table.c
@@ -9,7 +9,7 @@
#include <errno.h>
#include <malloc.h>
#ifdef CONFIG_QFW
-#include <qemu_fw_cfg.h>
+#include <qfw.h>
#endif
#include <asm/io.h>
#include <asm/tables.h>
diff --git a/arch/x86/cpu/qemu/cpu.c b/arch/x86/cpu/qemu/cpu.c
index 4d2989a..b1a965e 100644
--- a/arch/x86/cpu/qemu/cpu.c
+++ b/arch/x86/cpu/qemu/cpu.c
@@ -8,7 +8,7 @@
#include <cpu.h>
#include <dm.h>
#include <errno.h>
-#include <qemu_fw_cfg.h>
+#include <qfw.h>
#include <asm/cpu.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c
index 716a0ac..35cd107 100644
--- a/arch/x86/cpu/qemu/qemu.c
+++ b/arch/x86/cpu/qemu/qemu.c
@@ -7,7 +7,7 @@
#include <common.h>
#include <pci.h>
#ifdef CONFIG_QFW
-#include <qemu_fw_cfg.h>
+#include <qfw.h>
#endif
#include <asm/irq.h>
#include <asm/post.h>
diff --git a/cmd/cmd_qfw.c b/cmd/cmd_qfw.c
index eefaf65..aeb576b 100644
--- a/cmd/cmd_qfw.c
+++ b/cmd/cmd_qfw.c
@@ -7,7 +7,7 @@
#include <common.h>
#include <command.h>
#include <errno.h>
-#include <qemu_fw_cfg.h>
+#include <qfw.h>
/*
* This function prepares kernel for zboot. It loads kernel data
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 4893086..98704f2 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -43,4 +43,4 @@ obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
obj-$(CONFIG_RESET) += reset-uclass.o
obj-$(CONFIG_FSL_DEVICE_DISABLE) += fsl_devdis.o
obj-$(CONFIG_WINBOND_W83627) += winbond_w83627.o
-obj-$(CONFIG_QFW) += qemu_fw_cfg.o
+obj-$(CONFIG_QFW) += qfw.o
diff --git a/drivers/misc/qemu_fw_cfg.c b/drivers/misc/qemu_fw_cfg.c
deleted file mode 100644
index 0700641..0000000
--- a/drivers/misc/qemu_fw_cfg.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <errno.h>
-#include <malloc.h>
-#include <qemu_fw_cfg.h>
-#include <asm/io.h>
-#include <linux/list.h>
-
-static bool fwcfg_present;
-static bool fwcfg_dma_present;
-static struct fw_cfg_arch_ops *fwcfg_arch_ops;
-
-static LIST_HEAD(fw_list);
-
-/* Read configuration item using fw_cfg PIO interface */
-static void qemu_fwcfg_read_entry_pio(uint16_t entry,
- uint32_t size, void *address)
-{
- debug("qemu_fwcfg_read_entry_pio: entry 0x%x, size %u address %p\n",
- entry, size, address);
-
- return fwcfg_arch_ops->arch_read_pio(entry, size, address);
-}
-
-/* Read configuration item using fw_cfg DMA interface */
-static void qemu_fwcfg_read_entry_dma(uint16_t entry,
- uint32_t size, void *address)
-{
- struct fw_cfg_dma_access dma;
-
- dma.length = cpu_to_be32(size);
- dma.address = cpu_to_be64((uintptr_t)address);
- dma.control = cpu_to_be32(FW_CFG_DMA_READ);
-
- /*
- * writting FW_CFG_INVALID will cause read operation to resume at
- * last offset, otherwise read will start at offset 0
- */
- if (entry != FW_CFG_INVALID)
- dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
-
- barrier();
-
- debug("qemu_fwcfg_read_entry_dma: entry 0x%x, size %u address %p, control 0x%x\n",
- entry, size, address, be32_to_cpu(dma.control));
-
- fwcfg_arch_ops->arch_read_dma(&dma);
-}
-
-bool qemu_fwcfg_present(void)
-{
- return fwcfg_present;
-}
-
-bool qemu_fwcfg_dma_present(void)
-{
- return fwcfg_dma_present;
-}
-
-void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
-{
- if (fwcfg_dma_present)
- qemu_fwcfg_read_entry_dma(entry, length, address);
- else
- qemu_fwcfg_read_entry_pio(entry, length, address);
-}
-
-int qemu_fwcfg_online_cpus(void)
-{
- uint16_t nb_cpus;
-
- if (!fwcfg_present)
- return -ENODEV;
-
- qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
-
- return le16_to_cpu(nb_cpus);
-}
-
-int qemu_fwcfg_read_firmware_list(void)
-{
- int i;
- uint32_t count;
- struct fw_file *file;
- struct list_head *entry;
-
- /* don't read it twice */
- if (!list_empty(&fw_list))
- return 0;
-
- qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
- if (!count)
- return 0;
-
- count = be32_to_cpu(count);
- for (i = 0; i < count; i++) {
- file = malloc(sizeof(*file));
- if (!file) {
- printf("error: allocating resource\n");
- goto err;
- }
- qemu_fwcfg_read_entry(FW_CFG_INVALID,
- sizeof(struct fw_cfg_file), &file->cfg);
- file->addr = 0;
- list_add_tail(&file->list, &fw_list);
- }
-
- return 0;
-
-err:
- list_for_each(entry, &fw_list) {
- file = list_entry(entry, struct fw_file, list);
- free(file);
- }
-
- return -ENOMEM;
-}
-
-struct fw_file *qemu_fwcfg_find_file(const char *name)
-{
- struct list_head *entry;
- struct fw_file *file;
-
- list_for_each(entry, &fw_list) {
- file = list_entry(entry, struct fw_file, list);
- if (!strcmp(file->cfg.name, name))
- return file;
- }
-
- return NULL;
-}
-
-struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
-{
- iter->entry = fw_list.next;
- return list_entry((struct list_head *)iter->entry,
- struct fw_file, list);
-}
-
-struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter)
-{
- iter->entry = ((struct list_head *)iter->entry)->next;
- return list_entry((struct list_head *)iter->entry,
- struct fw_file, list);
-}
-
-bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
-{
- return iter->entry == &fw_list;
-}
-
-void qemu_fwcfg_init(struct fw_cfg_arch_ops *ops)
-{
- uint32_t qemu;
- uint32_t dma_enabled;
-
- fwcfg_present = false;
- fwcfg_dma_present = false;
- fwcfg_arch_ops = NULL;
-
- if (!ops || !ops->arch_read_pio || !ops->arch_read_dma)
- return;
- fwcfg_arch_ops = ops;
-
- qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
- if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
- fwcfg_present = true;
-
- if (fwcfg_present) {
- qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
- if (dma_enabled & FW_CFG_DMA_ENABLED)
- fwcfg_dma_present = true;
- }
-}
-
diff --git a/drivers/misc/qfw.c b/drivers/misc/qfw.c
new file mode 100644
index 0000000..9f1bb2d
--- /dev/null
+++ b/drivers/misc/qfw.c
@@ -0,0 +1,181 @@
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <malloc.h>
+#include <qfw.h>
+#include <asm/io.h>
+#include <linux/list.h>
+
+static bool fwcfg_present;
+static bool fwcfg_dma_present;
+static struct fw_cfg_arch_ops *fwcfg_arch_ops;
+
+static LIST_HEAD(fw_list);
+
+/* Read configuration item using fw_cfg PIO interface */
+static void qemu_fwcfg_read_entry_pio(uint16_t entry,
+ uint32_t size, void *address)
+{
+ debug("qemu_fwcfg_read_entry_pio: entry 0x%x, size %u address %p\n",
+ entry, size, address);
+
+ return fwcfg_arch_ops->arch_read_pio(entry, size, address);
+}
+
+/* Read configuration item using fw_cfg DMA interface */
+static void qemu_fwcfg_read_entry_dma(uint16_t entry,
+ uint32_t size, void *address)
+{
+ struct fw_cfg_dma_access dma;
+
+ dma.length = cpu_to_be32(size);
+ dma.address = cpu_to_be64((uintptr_t)address);
+ dma.control = cpu_to_be32(FW_CFG_DMA_READ);
+
+ /*
+ * writting FW_CFG_INVALID will cause read operation to resume at
+ * last offset, otherwise read will start at offset 0
+ */
+ if (entry != FW_CFG_INVALID)
+ dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
+
+ barrier();
+
+ debug("qemu_fwcfg_read_entry_dma: entry 0x%x, size %u address %p, control 0x%x\n",
+ entry, size, address, be32_to_cpu(dma.control));
+
+ fwcfg_arch_ops->arch_read_dma(&dma);
+}
+
+bool qemu_fwcfg_present(void)
+{
+ return fwcfg_present;
+}
+
+bool qemu_fwcfg_dma_present(void)
+{
+ return fwcfg_dma_present;
+}
+
+void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
+{
+ if (fwcfg_dma_present)
+ qemu_fwcfg_read_entry_dma(entry, length, address);
+ else
+ qemu_fwcfg_read_entry_pio(entry, length, address);
+}
+
+int qemu_fwcfg_online_cpus(void)
+{
+ uint16_t nb_cpus;
+
+ if (!fwcfg_present)
+ return -ENODEV;
+
+ qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
+
+ return le16_to_cpu(nb_cpus);
+}
+
+int qemu_fwcfg_read_firmware_list(void)
+{
+ int i;
+ uint32_t count;
+ struct fw_file *file;
+ struct list_head *entry;
+
+ /* don't read it twice */
+ if (!list_empty(&fw_list))
+ return 0;
+
+ qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
+ if (!count)
+ return 0;
+
+ count = be32_to_cpu(count);
+ for (i = 0; i < count; i++) {
+ file = malloc(sizeof(*file));
+ if (!file) {
+ printf("error: allocating resource\n");
+ goto err;
+ }
+ qemu_fwcfg_read_entry(FW_CFG_INVALID,
+ sizeof(struct fw_cfg_file), &file->cfg);
+ file->addr = 0;
+ list_add_tail(&file->list, &fw_list);
+ }
+
+ return 0;
+
+err:
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ free(file);
+ }
+
+ return -ENOMEM;
+}
+
+struct fw_file *qemu_fwcfg_find_file(const char *name)
+{
+ struct list_head *entry;
+ struct fw_file *file;
+
+ list_for_each(entry, &fw_list) {
+ file = list_entry(entry, struct fw_file, list);
+ if (!strcmp(file->cfg.name, name))
+ return file;
+ }
+
+ return NULL;
+}
+
+struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
+{
+ iter->entry = fw_list.next;
+ return list_entry((struct list_head *)iter->entry,
+ struct fw_file, list);
+}
+
+struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter)
+{
+ iter->entry = ((struct list_head *)iter->entry)->next;
+ return list_entry((struct list_head *)iter->entry,
+ struct fw_file, list);
+}
+
+bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
+{
+ return iter->entry == &fw_list;
+}
+
+void qemu_fwcfg_init(struct fw_cfg_arch_ops *ops)
+{
+ uint32_t qemu;
+ uint32_t dma_enabled;
+
+ fwcfg_present = false;
+ fwcfg_dma_present = false;
+ fwcfg_arch_ops = NULL;
+
+ if (!ops || !ops->arch_read_pio || !ops->arch_read_dma)
+ return;
+ fwcfg_arch_ops = ops;
+
+ qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
+ if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
+ fwcfg_present = true;
+
+ if (fwcfg_present) {
+ qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
+ if (dma_enabled & FW_CFG_DMA_ENABLED)
+ fwcfg_dma_present = true;
+ }
+}
+
diff --git a/include/qemu_fw_cfg.h b/include/qemu_fw_cfg.h
deleted file mode 100644
index b0b3b59..0000000
--- a/include/qemu_fw_cfg.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __FW_CFG__
-#define __FW_CFG__
-
-#include <linux/list.h>
-
-enum qemu_fwcfg_items {
- FW_CFG_SIGNATURE = 0x00,
- FW_CFG_ID = 0x01,
- FW_CFG_UUID = 0x02,
- FW_CFG_RAM_SIZE = 0x03,
- FW_CFG_NOGRAPHIC = 0x04,
- FW_CFG_NB_CPUS = 0x05,
- FW_CFG_MACHINE_ID = 0x06,
- FW_CFG_KERNEL_ADDR = 0x07,
- FW_CFG_KERNEL_SIZE = 0x08,
- FW_CFG_KERNEL_CMDLINE = 0x09,
- FW_CFG_INITRD_ADDR = 0x0a,
- FW_CFG_INITRD_SIZE = 0x0b,
- FW_CFG_BOOT_DEVICE = 0x0c,
- FW_CFG_NUMA = 0x0d,
- FW_CFG_BOOT_MENU = 0x0e,
- FW_CFG_MAX_CPUS = 0x0f,
- FW_CFG_KERNEL_ENTRY = 0x10,
- FW_CFG_KERNEL_DATA = 0x11,
- FW_CFG_INITRD_DATA = 0x12,
- FW_CFG_CMDLINE_ADDR = 0x13,
- FW_CFG_CMDLINE_SIZE = 0x14,
- FW_CFG_CMDLINE_DATA = 0x15,
- FW_CFG_SETUP_ADDR = 0x16,
- FW_CFG_SETUP_SIZE = 0x17,
- FW_CFG_SETUP_DATA = 0x18,
- FW_CFG_FILE_DIR = 0x19,
- FW_CFG_FILE_FIRST = 0x20,
- FW_CFG_WRITE_CHANNEL = 0x4000,
- FW_CFG_ARCH_LOCAL = 0x8000,
- FW_CFG_INVALID = 0xffff,
-};
-
-enum {
- BIOS_LINKER_LOADER_COMMAND_ALLOCATE = 0x1,
- BIOS_LINKER_LOADER_COMMAND_ADD_POINTER = 0x2,
- BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM = 0x3,
-};
-
-enum {
- BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH = 0x1,
- BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG = 0x2,
-};
-
-#define FW_CFG_FILE_SLOTS 0x10
-#define FW_CFG_MAX_ENTRY (FW_CFG_FILE_FIRST + FW_CFG_FILE_SLOTS)
-#define FW_CFG_ENTRY_MASK ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL)
-
-#define FW_CFG_MAX_FILE_PATH 56
-#define BIOS_LINKER_LOADER_FILESZ FW_CFG_MAX_FILE_PATH
-
-#define QEMU_FW_CFG_SIGNATURE (('Q' << 24) | ('E' << 16) | ('M' << 8) | 'U')
-
-#define FW_CFG_DMA_ERROR (1 << 0)
-#define FW_CFG_DMA_READ (1 << 1)
-#define FW_CFG_DMA_SKIP (1 << 2)
-#define FW_CFG_DMA_SELECT (1 << 3)
-
-#define FW_CFG_DMA_ENABLED (1 << 1)
-
-struct fw_cfg_file {
- __be32 size;
- __be16 select;
- __be16 reserved;
- char name[FW_CFG_MAX_FILE_PATH];
-};
-
-struct fw_file {
- struct fw_cfg_file cfg; /* firmware file information */
- unsigned long addr; /* firmware file in-memory address */
- struct list_head list; /* list node to link to fw_list */
-};
-
-struct fw_cfg_file_iter {
- struct list_head *entry; /* structure to iterate file list */
-};
-
-struct fw_cfg_dma_access {
- __be32 control;
- __be32 length;
- __be64 address;
-};
-
-struct fw_cfg_arch_ops {
- void (*arch_read_pio)(uint16_t selector, uint32_t size,
- void *address);
- void (*arch_read_dma)(struct fw_cfg_dma_access *dma);
-};
-
-struct bios_linker_entry {
- __le32 command;
- union {
- /*
- * COMMAND_ALLOCATE - allocate a table from @alloc.file
- * subject to @alloc.align alignment (must be power of 2)
- * and @alloc.zone (can be HIGH or FSEG) requirements.
- *
- * Must appear exactly once for each file, and before
- * this file is referenced by any other command.
- */
- struct {
- char file[BIOS_LINKER_LOADER_FILESZ];
- __le32 align;
- uint8_t zone;
- } alloc;
-
- /*
- * COMMAND_ADD_POINTER - patch the table (originating from
- * @dest_file) at @pointer.offset, by adding a pointer to the
- * table originating from @src_file. 1,2,4 or 8 byte unsigned
- * addition is used depending on @pointer.size.
- */
- struct {
- char dest_file[BIOS_LINKER_LOADER_FILESZ];
- char src_file[BIOS_LINKER_LOADER_FILESZ];
- __le32 offset;
- uint8_t size;
- } pointer;
-
- /*
- * COMMAND_ADD_CHECKSUM - calculate checksum of the range
- * specified by @cksum_start and @cksum_length fields,
- * and then add the value at @cksum.offset.
- * Checksum simply sums -X for each byte X in the range
- * using 8-bit math.
- */
- struct {
- char file[BIOS_LINKER_LOADER_FILESZ];
- __le32 offset;
- __le32 start;
- __le32 length;
- } cksum;
-
- /* padding */
- char pad[124];
- };
-} __packed;
-
-/**
- * Initialize QEMU fw_cfg interface
- *
- * @ops: arch specific read operations
- */
-void qemu_fwcfg_init(struct fw_cfg_arch_ops *ops);
-
-void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address);
-int qemu_fwcfg_read_firmware_list(void);
-struct fw_file *qemu_fwcfg_find_file(const char *name);
-
-/**
- * Get system cpu number
- *
- * @return: cpu number in system
- */
-int qemu_fwcfg_online_cpus(void);
-
-/* helper functions to iterate firmware file list */
-struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter);
-struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter);
-bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter);
-
-bool qemu_fwcfg_present(void);
-bool qemu_fwcfg_dma_present(void);
-
-#endif
diff --git a/include/qfw.h b/include/qfw.h
new file mode 100644
index 0000000..b0b3b59
--- /dev/null
+++ b/include/qfw.h
@@ -0,0 +1,176 @@
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FW_CFG__
+#define __FW_CFG__
+
+#include <linux/list.h>
+
+enum qemu_fwcfg_items {
+ FW_CFG_SIGNATURE = 0x00,
+ FW_CFG_ID = 0x01,
+ FW_CFG_UUID = 0x02,
+ FW_CFG_RAM_SIZE = 0x03,
+ FW_CFG_NOGRAPHIC = 0x04,
+ FW_CFG_NB_CPUS = 0x05,
+ FW_CFG_MACHINE_ID = 0x06,
+ FW_CFG_KERNEL_ADDR = 0x07,
+ FW_CFG_KERNEL_SIZE = 0x08,
+ FW_CFG_KERNEL_CMDLINE = 0x09,
+ FW_CFG_INITRD_ADDR = 0x0a,
+ FW_CFG_INITRD_SIZE = 0x0b,
+ FW_CFG_BOOT_DEVICE = 0x0c,
+ FW_CFG_NUMA = 0x0d,
+ FW_CFG_BOOT_MENU = 0x0e,
+ FW_CFG_MAX_CPUS = 0x0f,
+ FW_CFG_KERNEL_ENTRY = 0x10,
+ FW_CFG_KERNEL_DATA = 0x11,
+ FW_CFG_INITRD_DATA = 0x12,
+ FW_CFG_CMDLINE_ADDR = 0x13,
+ FW_CFG_CMDLINE_SIZE = 0x14,
+ FW_CFG_CMDLINE_DATA = 0x15,
+ FW_CFG_SETUP_ADDR = 0x16,
+ FW_CFG_SETUP_SIZE = 0x17,
+ FW_CFG_SETUP_DATA = 0x18,
+ FW_CFG_FILE_DIR = 0x19,
+ FW_CFG_FILE_FIRST = 0x20,
+ FW_CFG_WRITE_CHANNEL = 0x4000,
+ FW_CFG_ARCH_LOCAL = 0x8000,
+ FW_CFG_INVALID = 0xffff,
+};
+
+enum {
+ BIOS_LINKER_LOADER_COMMAND_ALLOCATE = 0x1,
+ BIOS_LINKER_LOADER_COMMAND_ADD_POINTER = 0x2,
+ BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM = 0x3,
+};
+
+enum {
+ BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH = 0x1,
+ BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG = 0x2,
+};
+
+#define FW_CFG_FILE_SLOTS 0x10
+#define FW_CFG_MAX_ENTRY (FW_CFG_FILE_FIRST + FW_CFG_FILE_SLOTS)
+#define FW_CFG_ENTRY_MASK ~(FW_CFG_WRITE_CHANNEL | FW_CFG_ARCH_LOCAL)
+
+#define FW_CFG_MAX_FILE_PATH 56
+#define BIOS_LINKER_LOADER_FILESZ FW_CFG_MAX_FILE_PATH
+
+#define QEMU_FW_CFG_SIGNATURE (('Q' << 24) | ('E' << 16) | ('M' << 8) | 'U')
+
+#define FW_CFG_DMA_ERROR (1 << 0)
+#define FW_CFG_DMA_READ (1 << 1)
+#define FW_CFG_DMA_SKIP (1 << 2)
+#define FW_CFG_DMA_SELECT (1 << 3)
+
+#define FW_CFG_DMA_ENABLED (1 << 1)
+
+struct fw_cfg_file {
+ __be32 size;
+ __be16 select;
+ __be16 reserved;
+ char name[FW_CFG_MAX_FILE_PATH];
+};
+
+struct fw_file {
+ struct fw_cfg_file cfg; /* firmware file information */
+ unsigned long addr; /* firmware file in-memory address */
+ struct list_head list; /* list node to link to fw_list */
+};
+
+struct fw_cfg_file_iter {
+ struct list_head *entry; /* structure to iterate file list */
+};
+
+struct fw_cfg_dma_access {
+ __be32 control;
+ __be32 length;
+ __be64 address;
+};
+
+struct fw_cfg_arch_ops {
+ void (*arch_read_pio)(uint16_t selector, uint32_t size,
+ void *address);
+ void (*arch_read_dma)(struct fw_cfg_dma_access *dma);
+};
+
+struct bios_linker_entry {
+ __le32 command;
+ union {
+ /*
+ * COMMAND_ALLOCATE - allocate a table from @alloc.file
+ * subject to @alloc.align alignment (must be power of 2)
+ * and @alloc.zone (can be HIGH or FSEG) requirements.
+ *
+ * Must appear exactly once for each file, and before
+ * this file is referenced by any other command.
+ */
+ struct {
+ char file[BIOS_LINKER_LOADER_FILESZ];
+ __le32 align;
+ uint8_t zone;
+ } alloc;
+
+ /*
+ * COMMAND_ADD_POINTER - patch the table (originating from
+ * @dest_file) at @pointer.offset, by adding a pointer to the
+ * table originating from @src_file. 1,2,4 or 8 byte unsigned
+ * addition is used depending on @pointer.size.
+ */
+ struct {
+ char dest_file[BIOS_LINKER_LOADER_FILESZ];
+ char src_file[BIOS_LINKER_LOADER_FILESZ];
+ __le32 offset;
+ uint8_t size;
+ } pointer;
+
+ /*
+ * COMMAND_ADD_CHECKSUM - calculate checksum of the range
+ * specified by @cksum_start and @cksum_length fields,
+ * and then add the value@@cksum.offset.
+ * Checksum simply sums -X for each byte X in the range
+ * using 8-bit math.
+ */
+ struct {
+ char file[BIOS_LINKER_LOADER_FILESZ];
+ __le32 offset;
+ __le32 start;
+ __le32 length;
+ } cksum;
+
+ /* padding */
+ char pad[124];
+ };
+} __packed;
+
+/**
+ * Initialize QEMU fw_cfg interface
+ *
+ * @ops: arch specific read operations
+ */
+void qemu_fwcfg_init(struct fw_cfg_arch_ops *ops);
+
+void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address);
+int qemu_fwcfg_read_firmware_list(void);
+struct fw_file *qemu_fwcfg_find_file(const char *name);
+
+/**
+ * Get system cpu number
+ *
+ * @return: cpu number in system
+ */
+int qemu_fwcfg_online_cpus(void);
+
+/* helper functions to iterate firmware file list */
+struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter);
+struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter);
+bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter);
+
+bool qemu_fwcfg_present(void);
+bool qemu_fwcfg_dma_present(void);
+
+#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 09/12] cmd: qfw: workaround qfw build issue
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
` (7 preceding siblings ...)
2016-05-13 6:29 ` [U-Boot] [PATCH 08/12] cmd: qfw: rename qemu_fw_cfg.[c|h] to qfw.[c|h] Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 10/12] cmd: qfw: do not depend on x86 Miao Yan
` (2 subsequent siblings)
11 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
The qfw command interface makes use of CONFIG_LOADADDR and
CONFIG_RAMDISKADDR to setup kernel. But not all boards have these macro,
which causes build problem on those platforms.
This patch fixes this issue.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
cmd/cmd_qfw.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/cmd/cmd_qfw.c b/cmd/cmd_qfw.c
index aeb576b..13ad673 100644
--- a/cmd/cmd_qfw.c
+++ b/cmd/cmd_qfw.c
@@ -126,12 +126,20 @@ static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
env = getenv("loadaddr");
load_addr = env ?
(void *)simple_strtoul(env, NULL, 16) :
+#ifdef CONFIG_LOADADDR
(void *)CONFIG_LOADADDR;
+#else
+ NULL;
+#endif
env = getenv("ramdiskaddr");
initrd_addr = env ?
(void *)simple_strtoul(env, NULL, 16) :
+#ifdef CONFIG_RAMDISK_ADDR
(void *)CONFIG_RAMDISK_ADDR;
+#else
+ NULL;
+#endif
if (argc == 2) {
load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
@@ -140,6 +148,11 @@ static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
}
+ if (!load_addr || !initrd_addr) {
+ printf("missing load or initrd address\n");
+ return CMD_RET_FAILURE;
+ }
+
return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
}
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 10/12] cmd: qfw: do not depend on x86
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
` (8 preceding siblings ...)
2016-05-13 6:29 ` [U-Boot] [PATCH 09/12] cmd: qfw: workaround qfw build issue Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 11/12] cmd: qfw: bring ACPI generation code into qfw core Miao Yan
2016-05-13 6:29 ` [U-Boot] [PATCH 12/12] x86: qemu: rename qemu/acpi_table.c Miao Yan
11 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
The qfw command interface used to depend on X86, this patch removes
this restriction so it can be built for sandbox for testing. For normal
usage, it can only be used with CONFIG_QEMU.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
cmd/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 08b761f..01870cb 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -595,7 +595,6 @@ config CMD_SOUND
config CMD_QEMU_FW_CFG
bool "qfw"
- depends on X86
select QFW
help
This provides access to the QEMU firmware interface. The main
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 11/12] cmd: qfw: bring ACPI generation code into qfw core
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
` (9 preceding siblings ...)
2016-05-13 6:29 ` [U-Boot] [PATCH 10/12] cmd: qfw: do not depend on x86 Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 14:01 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 12/12] x86: qemu: rename qemu/acpi_table.c Miao Yan
11 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
Loading ACPI table from QEMU's fw_cfg interface is not x86 specific
(ARM64 may also make user of it). So move the code common place.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
arch/x86/cpu/qemu/acpi_table.c | 211 -----------------------------------------
drivers/misc/qfw.c | 206 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 206 insertions(+), 211 deletions(-)
diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c
index 0c54b80..63853e4 100644
--- a/arch/x86/cpu/qemu/acpi_table.c
+++ b/arch/x86/cpu/qemu/acpi_table.c
@@ -5,141 +5,7 @@
*/
#include <common.h>
-#include <command.h>
-#include <errno.h>
-#include <malloc.h>
-#ifdef CONFIG_QFW
-#include <qfw.h>
-#endif
-#include <asm/io.h>
-#include <asm/tables.h>
#include <asm/e820.h>
-#include <linux/list.h>
-#include <memalign.h>
-
-/*
- * This function allocates memory for ACPI tables
- *
- * @entry : BIOS linker command entry which tells where to allocate memory
- * (either high memory or low memory)
- * @addr : The address that should be used for low memory allcation. If the
- * memory allocation request is 'ZONE_HIGH' then this parameter will
- * be ignored.
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr)
-{
- uint32_t size, align;
- struct fw_file *file;
- unsigned long aligned_addr;
-
- align = le32_to_cpu(entry->alloc.align);
- /* align must be power of 2 */
- if (align & (align - 1)) {
- printf("error: wrong alignment %u\n", align);
- return -EINVAL;
- }
-
- file = qemu_fwcfg_find_file(entry->alloc.file);
- if (!file) {
- printf("error: can't find file %s\n", entry->alloc.file);
- return -ENOENT;
- }
-
- size = be32_to_cpu(file->cfg.size);
-
- /*
- * ZONE_HIGH means we need to allocate from high memory, since
- * malloc space is already at the end of RAM, so we directly use it.
- * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
- * in which is low memory
- */
- if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
- aligned_addr = (unsigned long)memalign(align, size);
- if (!aligned_addr) {
- printf("error: allocating resource\n");
- return -ENOMEM;
- }
- } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
- aligned_addr = ALIGN(*addr, align);
- } else {
- printf("error: invalid allocation zone\n");
- return -EINVAL;
- }
-
- debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
- file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
-
- qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
- size, (void *)aligned_addr);
- file->addr = aligned_addr;
-
- /* adjust address for low memory allocation */
- if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
- *addr = (aligned_addr + size);
-
- return 0;
-}
-
-/*
- * This function patches ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells how to patch
- * ACPI tables
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_pointer(struct bios_linker_entry *entry)
-{
- struct fw_file *dest, *src;
- uint32_t offset = le32_to_cpu(entry->pointer.offset);
- uint64_t pointer = 0;
-
- dest = qemu_fwcfg_find_file(entry->pointer.dest_file);
- if (!dest || !dest->addr)
- return -ENOENT;
- src = qemu_fwcfg_find_file(entry->pointer.src_file);
- if (!src || !src->addr)
- return -ENOENT;
-
- debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
- dest->addr, src->addr, offset, entry->pointer.size, pointer);
-
- memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
- pointer = le64_to_cpu(pointer);
- pointer += (unsigned long)src->addr;
- pointer = cpu_to_le64(pointer);
- memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
-
- return 0;
-}
-
-/*
- * This function updates checksum fields of ACPI tables previously loaded
- * by bios_linker_allocate()
- *
- * @entry : BIOS linker command entry which tells where to update ACPI table
- * checksums
- * @return: 0 on success, or negative value on failure
- */
-static int bios_linker_add_checksum(struct bios_linker_entry *entry)
-{
- struct fw_file *file;
- uint8_t *data, cksum = 0;
- uint8_t *cksum_start;
-
- file = qemu_fwcfg_find_file(entry->cksum.file);
- if (!file || !file->addr)
- return -ENOENT;
-
- data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
- cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
- cksum = table_compute_checksum(cksum_start,
- le32_to_cpu(entry->cksum.length));
- *data = cksum;
-
- return 0;
-}
unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
{
@@ -175,80 +41,3 @@ unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
return 6;
}
-
-/* This function loads and patches ACPI tables provided by QEMU */
-u32 write_acpi_tables(u32 addr)
-{
- int i, ret = 0;
- struct fw_file *file;
- struct bios_linker_entry *table_loader;
- struct bios_linker_entry *entry;
- uint32_t size;
-
- /* make sure fw_list is loaded */
- ret = qemu_fwcfg_read_firmware_list();
- if (ret) {
- printf("error: can't read firmware file list\n");
- return addr;
- }
-
- file = qemu_fwcfg_find_file("etc/table-loader");
- if (!file) {
- printf("error: can't find etc/table-loader\n");
- return addr;
- }
-
- size = be32_to_cpu(file->cfg.size);
- if ((size % sizeof(*entry)) != 0) {
- printf("error: table-loader maybe corrupted\n");
- return addr;
- }
-
- table_loader = malloc(size);
- if (!table_loader) {
- printf("error: no memory for table-loader\n");
- return addr;
- }
-
- qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
- size, table_loader);
-
- for (i = 0; i < (size / sizeof(*entry)); i++) {
- entry = table_loader + i;
- switch (le32_to_cpu(entry->command)) {
- case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
- ret = bios_linker_allocate(entry, &addr);
- if (ret)
- goto out;
- break;
- case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
- ret = bios_linker_add_pointer(entry);
- if (ret)
- goto out;
- break;
- case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
- ret = bios_linker_add_checksum(entry);
- if (ret)
- goto out;
- break;
- default:
- break;
- }
- }
-
-out:
- if (ret) {
- struct fw_cfg_file_iter iter;
- for (file = qemu_fwcfg_file_iter_init(&iter);
- !qemu_fwcfg_file_iter_end(&iter);
- file = qemu_fwcfg_file_iter_next(&iter)) {
- if (file->addr) {
- free((void *)file->addr);
- file->addr = 0;
- }
- }
- }
-
- free(table_loader);
- return addr;
-}
diff --git a/drivers/misc/qfw.c b/drivers/misc/qfw.c
index 9f1bb2d..c0aaa61 100644
--- a/drivers/misc/qfw.c
+++ b/drivers/misc/qfw.c
@@ -10,6 +10,9 @@
#include <malloc.h>
#include <qfw.h>
#include <asm/io.h>
+#ifdef CONFIG_GENERATE_ACPI_TABLE
+#include <asm/tables.h>
+#endif
#include <linux/list.h>
static bool fwcfg_present;
@@ -18,6 +21,209 @@ static struct fw_cfg_arch_ops *fwcfg_arch_ops;
static LIST_HEAD(fw_list);
+#ifdef CONFIG_GENERATE_ACPI_TABLE
+/*
+ * This function allocates memory for ACPI tables
+ *
+ * @entry : BIOS linker command entry which tells where to allocate memory
+ * (either high memory or low memory)
+ * @addr : The address that should be used for low memory allcation. If the
+ * memory allocation request is 'ZONE_HIGH' then this parameter will
+ * be ignored.
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_allocate(struct bios_linker_entry *entry, u32 *addr)
+{
+ uint32_t size, align;
+ struct fw_file *file;
+ unsigned long aligned_addr;
+
+ align = le32_to_cpu(entry->alloc.align);
+ /* align must be power of 2 */
+ if (align & (align - 1)) {
+ printf("error: wrong alignment %u\n", align);
+ return -EINVAL;
+ }
+
+ file = qemu_fwcfg_find_file(entry->alloc.file);
+ if (!file) {
+ printf("error: can't find file %s\n", entry->alloc.file);
+ return -ENOENT;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+
+ /*
+ * ZONE_HIGH means we need to allocate from high memory, since
+ * malloc space is already at the end of RAM, so we directly use it.
+ * If allocation zone is ZONE_FSEG, then we use the 'addr' passed
+ * in which is low memory
+ */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_HIGH) {
+ aligned_addr = (unsigned long)memalign(align, size);
+ if (!aligned_addr) {
+ printf("error: allocating resource\n");
+ return -ENOMEM;
+ }
+ } else if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG) {
+ aligned_addr = ALIGN(*addr, align);
+ } else {
+ printf("error: invalid allocation zone\n");
+ return -EINVAL;
+ }
+
+ debug("bios_linker_allocate: allocate file %s, size %u, zone %d, align %u, addr 0x%lx\n",
+ file->cfg.name, size, entry->alloc.zone, align, aligned_addr);
+
+ qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+ size, (void *)aligned_addr);
+ file->addr = aligned_addr;
+
+ /* adjust address for low memory allocation */
+ if (entry->alloc.zone == BIOS_LINKER_LOADER_ALLOC_ZONE_FSEG)
+ *addr = (aligned_addr + size);
+
+ return 0;
+}
+
+/*
+ * This function patches ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells how to patch
+ * ACPI tables
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_pointer(struct bios_linker_entry *entry)
+{
+ struct fw_file *dest, *src;
+ uint32_t offset = le32_to_cpu(entry->pointer.offset);
+ uint64_t pointer = 0;
+
+ dest = qemu_fwcfg_find_file(entry->pointer.dest_file);
+ if (!dest || !dest->addr)
+ return -ENOENT;
+ src = qemu_fwcfg_find_file(entry->pointer.src_file);
+ if (!src || !src->addr)
+ return -ENOENT;
+
+ debug("bios_linker_add_pointer: dest->addr 0x%lx, src->addr 0x%lx, offset 0x%x size %u, 0x%llx\n",
+ dest->addr, src->addr, offset, entry->pointer.size, pointer);
+
+ memcpy(&pointer, (char *)dest->addr + offset, entry->pointer.size);
+ pointer = le64_to_cpu(pointer);
+ pointer += (unsigned long)src->addr;
+ pointer = cpu_to_le64(pointer);
+ memcpy((char *)dest->addr + offset, &pointer, entry->pointer.size);
+
+ return 0;
+}
+
+/*
+ * This function updates checksum fields of ACPI tables previously loaded
+ * by bios_linker_allocate()
+ *
+ * @entry : BIOS linker command entry which tells where to update ACPI table
+ * checksums
+ * @return: 0 on success, or negative value on failure
+ */
+static int bios_linker_add_checksum(struct bios_linker_entry *entry)
+{
+ struct fw_file *file;
+ uint8_t *data, cksum = 0;
+ uint8_t *cksum_start;
+
+ file = qemu_fwcfg_find_file(entry->cksum.file);
+ if (!file || !file->addr)
+ return -ENOENT;
+
+ data = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.offset));
+ cksum_start = (uint8_t *)(file->addr + le32_to_cpu(entry->cksum.start));
+ cksum = table_compute_checksum(cksum_start,
+ le32_to_cpu(entry->cksum.length));
+ *data = cksum;
+
+ return 0;
+}
+
+/* This function loads and patches ACPI tables provided by QEMU */
+u32 write_acpi_tables(u32 addr)
+{
+ int i, ret = 0;
+ struct fw_file *file;
+ struct bios_linker_entry *table_loader;
+ struct bios_linker_entry *entry;
+ uint32_t size;
+
+ /* make sure fw_list is loaded */
+ ret = qemu_fwcfg_read_firmware_list();
+ if (ret) {
+ printf("error: can't read firmware file list\n");
+ return addr;
+ }
+
+ file = qemu_fwcfg_find_file("etc/table-loader");
+ if (!file) {
+ printf("error: can't find etc/table-loader\n");
+ return addr;
+ }
+
+ size = be32_to_cpu(file->cfg.size);
+ if ((size % sizeof(*entry)) != 0) {
+ printf("error: table-loader maybe corrupted\n");
+ return addr;
+ }
+
+ table_loader = malloc(size);
+ if (!table_loader) {
+ printf("error: no memory for table-loader\n");
+ return addr;
+ }
+
+ qemu_fwcfg_read_entry(be16_to_cpu(file->cfg.select),
+ size, table_loader);
+
+ for (i = 0; i < (size / sizeof(*entry)); i++) {
+ entry = table_loader + i;
+ switch (le32_to_cpu(entry->command)) {
+ case BIOS_LINKER_LOADER_COMMAND_ALLOCATE:
+ ret = bios_linker_allocate(entry, &addr);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_POINTER:
+ ret = bios_linker_add_pointer(entry);
+ if (ret)
+ goto out;
+ break;
+ case BIOS_LINKER_LOADER_COMMAND_ADD_CHECKSUM:
+ ret = bios_linker_add_checksum(entry);
+ if (ret)
+ goto out;
+ break;
+ default:
+ break;
+ }
+ }
+
+out:
+ if (ret) {
+ struct fw_cfg_file_iter iter;
+ for (file = qemu_fwcfg_file_iter_init(&iter);
+ !qemu_fwcfg_file_iter_end(&iter);
+ file = qemu_fwcfg_file_iter_next(&iter)) {
+ if (file->addr) {
+ free((void *)file->addr);
+ file->addr = 0;
+ }
+ }
+ }
+
+ free(table_loader);
+ return addr;
+}
+#endif
+
/* Read configuration item using fw_cfg PIO interface */
static void qemu_fwcfg_read_entry_pio(uint16_t entry,
uint32_t size, void *address)
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 12/12] x86: qemu: rename qemu/acpi_table.c
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
` (10 preceding siblings ...)
2016-05-13 6:29 ` [U-Boot] [PATCH 11/12] cmd: qfw: bring ACPI generation code into qfw core Miao Yan
@ 2016-05-13 6:29 ` Miao Yan
2016-05-13 14:01 ` Bin Meng
11 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-13 6:29 UTC (permalink / raw)
To: u-boot
Rename qemu/acpi_table.c to qemu/e820.c, because ACPI stuff is moved
to qfw core, this file only contains code for installing e820 table.
Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
---
arch/x86/cpu/qemu/Makefile | 3 +--
arch/x86/cpu/qemu/acpi_table.c | 43 ------------------------------------------
arch/x86/cpu/qemu/e820.c | 43 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 44 insertions(+), 45 deletions(-)
delete mode 100644 arch/x86/cpu/qemu/acpi_table.c
create mode 100644 arch/x86/cpu/qemu/e820.c
diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
index 7c08c3d..a080c5e 100644
--- a/arch/x86/cpu/qemu/Makefile
+++ b/arch/x86/cpu/qemu/Makefile
@@ -8,5 +8,4 @@ ifndef CONFIG_EFI_STUB
obj-y += car.o dram.o
endif
obj-y += qemu.o
-obj-$(CONFIG_QFW) += cpu.o
-obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
+obj-$(CONFIG_QFW) += cpu.o e820.o
diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c
deleted file mode 100644
index 63853e4..0000000
--- a/arch/x86/cpu/qemu/acpi_table.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/e820.h>
-
-unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
-{
- entries[0].addr = 0;
- entries[0].size = ISA_START_ADDRESS;
- entries[0].type = E820_RAM;
-
- entries[1].addr = ISA_START_ADDRESS;
- entries[1].size = ISA_END_ADDRESS - ISA_START_ADDRESS;
- entries[1].type = E820_RESERVED;
-
- /*
- * since we use memalign(malloc) to allocate high memory for
- * storing ACPI tables, we need to reserve them in e820 tables,
- * otherwise kernel will reclaim them and data will be corrupted
- */
- entries[2].addr = ISA_END_ADDRESS;
- entries[2].size = gd->relocaddr - TOTAL_MALLOC_LEN - ISA_END_ADDRESS;
- entries[2].type = E820_RAM;
-
- /* for simplicity, reserve entire malloc space */
- entries[3].addr = gd->relocaddr - TOTAL_MALLOC_LEN;
- entries[3].size = TOTAL_MALLOC_LEN;
- entries[3].type = E820_RESERVED;
-
- entries[4].addr = gd->relocaddr;
- entries[4].size = gd->ram_size - gd->relocaddr;
- entries[4].type = E820_RESERVED;
-
- entries[5].addr = CONFIG_PCIE_ECAM_BASE;
- entries[5].size = CONFIG_PCIE_ECAM_SIZE;
- entries[5].type = E820_RESERVED;
-
- return 6;
-}
diff --git a/arch/x86/cpu/qemu/e820.c b/arch/x86/cpu/qemu/e820.c
new file mode 100644
index 0000000..63853e4
--- /dev/null
+++ b/arch/x86/cpu/qemu/e820.c
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/e820.h>
+
+unsigned install_e820_map(unsigned max_entries, struct e820entry *entries)
+{
+ entries[0].addr = 0;
+ entries[0].size = ISA_START_ADDRESS;
+ entries[0].type = E820_RAM;
+
+ entries[1].addr = ISA_START_ADDRESS;
+ entries[1].size = ISA_END_ADDRESS - ISA_START_ADDRESS;
+ entries[1].type = E820_RESERVED;
+
+ /*
+ * since we use memalign(malloc) to allocate high memory for
+ * storing ACPI tables, we need to reserve them in e820 tables,
+ * otherwise kernel will reclaim them and data will be corrupted
+ */
+ entries[2].addr = ISA_END_ADDRESS;
+ entries[2].size = gd->relocaddr - TOTAL_MALLOC_LEN - ISA_END_ADDRESS;
+ entries[2].type = E820_RAM;
+
+ /* for simplicity, reserve entire malloc space */
+ entries[3].addr = gd->relocaddr - TOTAL_MALLOC_LEN;
+ entries[3].size = TOTAL_MALLOC_LEN;
+ entries[3].type = E820_RESERVED;
+
+ entries[4].addr = gd->relocaddr;
+ entries[4].size = gd->ram_size - gd->relocaddr;
+ entries[4].type = E820_RESERVED;
+
+ entries[5].addr = CONFIG_PCIE_ECAM_BASE;
+ entries[5].size = CONFIG_PCIE_ECAM_SIZE;
+ entries[5].type = E820_RESERVED;
+
+ return 6;
+}
--
1.9.1
^ permalink raw reply related [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 01/12] x86: qemu: fix ACPI Kconfig options
2016-05-13 6:29 ` [U-Boot] [PATCH 01/12] x86: qemu: fix ACPI Kconfig options Miao Yan
@ 2016-05-13 13:59 ` Bin Meng
2016-05-16 9:37 ` Miao Yan
0 siblings, 1 reply; 40+ messages in thread
From: Bin Meng @ 2016-05-13 13:59 UTC (permalink / raw)
To: u-boot
Hi Miao,
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> CONFIG_GENENRATE_ACPI_TABLE controls the generation of ACPI table which
> uses U-Boot's built-in methods and CONFIG_QEMU_ACPI_TABLE controls whether
> to load ACPI table from QEMU's fw_cfg interface.
>
> But with commit "697ec431469ce0a4c2fc2c02d8685d907491af84 x86: qemu: Drop
> our own ACPI implementation", there is only one way to support ACPI table
> for QEMU targets which is the fw_cfg interface. Having two Kconfig options
> for this purpose is not necessary any more, so this patch consolidates
> the two.
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
> arch/x86/Kconfig | 10 +---------
> arch/x86/cpu/qemu/Makefile | 2 +-
> arch/x86/lib/Makefile | 2 +-
> 3 files changed, 3 insertions(+), 11 deletions(-)
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 4ef27dc..a60e0da 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -436,21 +436,13 @@ config GENERATE_MP_TABLE
> config GENERATE_ACPI_TABLE
> bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
> default n
> + select QEMU_FW_CFG if QEMU
I think this should be CMD_QEMU_FW_CFG
> help
> The Advanced Configuration and Power Interface (ACPI) specification
> provides an open standard for device configuration and management
> by the operating system. It defines platform-independent interfaces
> for configuration and power management monitoring.
>
> -config QEMU_ACPI_TABLE
> - bool "Load ACPI table from QEMU fw_cfg interface"
> - depends on GENERATE_ACPI_TABLE && QEMU
> - default y
> - help
> - By default, U-Boot generates its own ACPI tables. This option, if
> - enabled, disables U-Boot's version and loads ACPI tables generated
> - by QEMU.
> -
> config GENERATE_SMBIOS_TABLE
> bool "Generate an SMBIOS (System Management BIOS) table"
> default y
> diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
> index 97b965c..43ee4bd 100644
> --- a/arch/x86/cpu/qemu/Makefile
> +++ b/arch/x86/cpu/qemu/Makefile
> @@ -8,4 +8,4 @@ ifndef CONFIG_EFI_STUB
> obj-y += car.o dram.o
> endif
> obj-y += cpu.o qemu.o
> -obj-$(CONFIG_QEMU_ACPI_TABLE) += acpi_table.o
> +obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
> diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
> index dc90df2..ce5eb82 100644
> --- a/arch/x86/lib/Makefile
> +++ b/arch/x86/lib/Makefile
> @@ -31,7 +31,7 @@ obj-$(CONFIG_X86_RAMTEST) += ramtest.o
> obj-y += sfi.o
> obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += smbios.o
> obj-y += string.o
> -ifndef CONFIG_QEMU_ACPI_TABLE
> +ifndef CONFIG_QEMU
> obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
> endif
> obj-y += tables.o
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 02/12] cmd: qfw: add API to iterate firmware list
2016-05-13 6:29 ` [U-Boot] [PATCH 02/12] cmd: qfw: add API to iterate firmware list Miao Yan
@ 2016-05-13 14:00 ` Bin Meng
0 siblings, 0 replies; 40+ messages in thread
From: Bin Meng @ 2016-05-13 14:00 UTC (permalink / raw)
To: u-boot
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> This patch is part of the refactor work of qfw. It adds 3 APIs to qfw
> core to iterate firmware list.
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
> cmd/qemu_fw_cfg.c | 25 ++++++++++++++++++++++---
> include/qemu_fw_cfg.h | 9 +++++++++
> 2 files changed, 31 insertions(+), 3 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 03/12] cmd: qfw: remove qemu_fwcfg_free_files()
2016-05-13 6:29 ` [U-Boot] [PATCH 03/12] cmd: qfw: remove qemu_fwcfg_free_files() Miao Yan
@ 2016-05-13 14:00 ` Bin Meng
2016-05-13 20:46 ` Tom Rini
0 siblings, 1 reply; 40+ messages in thread
From: Bin Meng @ 2016-05-13 14:00 UTC (permalink / raw)
To: u-boot
Hi Miao,
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> This patch is part of the qfw refactor work.
>
> The qemu_fwcfg_free_files() function is only used in error handling in
> ACPI table generation, let's not make this a core function and move it
> to the right place.
>
But I suspect this API may still be needed in some other scenarioes?
eg: for future ARM64 ACPI?
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
> arch/x86/cpu/qemu/acpi_table.c | 13 +++++++++++--
> cmd/qemu_fw_cfg.c | 12 ------------
> include/qemu_fw_cfg.h | 1 -
> 3 files changed, 11 insertions(+), 15 deletions(-)
>
> diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c
> index 49381ac..b17fa03 100644
> --- a/arch/x86/cpu/qemu/acpi_table.c
> +++ b/arch/x86/cpu/qemu/acpi_table.c
> @@ -235,8 +235,17 @@ u32 write_acpi_tables(u32 addr)
> }
>
> out:
> - if (ret)
> - qemu_fwcfg_free_files();
> + if (ret) {
> + struct fw_cfg_file_iter iter;
> + for (file = qemu_fwcfg_file_iter_init(&iter);
> + !qemu_fwcfg_file_iter_end(&iter);
> + file = qemu_fwcfg_file_iter_next(&iter)) {
> + if (file->addr) {
> + free((void *)file->addr);
> + file->addr = 0;
> + }
> + }
> + }
>
> free(table_loader);
> return addr;
> diff --git a/cmd/qemu_fw_cfg.c b/cmd/qemu_fw_cfg.c
> index 192b7d1..9f03ab6 100644
> --- a/cmd/qemu_fw_cfg.c
> +++ b/cmd/qemu_fw_cfg.c
> @@ -217,18 +217,6 @@ struct fw_file *qemu_fwcfg_find_file(const char *name)
> return NULL;
> }
>
> -void qemu_fwcfg_free_files(void)
> -{
> - struct fw_file *file;
> - struct list_head *list;
> -
> - list_for_each(list, &fw_list) {
> - file = list_entry(list, struct fw_file, list);
> - if (file->addr)
> - free((void *)file->addr);
> - }
> -}
> -
> struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
> {
> iter->entry = fw_list.next;
> diff --git a/include/qemu_fw_cfg.h b/include/qemu_fw_cfg.h
> index 19d0ba0..986f4b2 100644
> --- a/include/qemu_fw_cfg.h
> +++ b/include/qemu_fw_cfg.h
> @@ -154,7 +154,6 @@ void qemu_fwcfg_init(void);
> void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address);
> int qemu_fwcfg_read_firmware_list(void);
> struct fw_file *qemu_fwcfg_find_file(const char *name);
> -void qemu_fwcfg_free_files(void);
>
> /**
> * Get system cpu number
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 04/12] cmd: qfw: make fwcfg_present and fwcfg_dma_present public
2016-05-13 6:29 ` [U-Boot] [PATCH 04/12] cmd: qfw: make fwcfg_present and fwcfg_dma_present public Miao Yan
@ 2016-05-13 14:00 ` Bin Meng
0 siblings, 0 replies; 40+ messages in thread
From: Bin Meng @ 2016-05-13 14:00 UTC (permalink / raw)
To: u-boot
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> This patch is part of the qfw refactor work. This patch makes
> qemu_fwcfg_present() and qemu_fwcfg_dma_present() public functions.
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
> cmd/qemu_fw_cfg.c | 37 ++++++++++++++++++++-----------------
> include/qemu_fw_cfg.h | 3 +++
> 2 files changed, 23 insertions(+), 17 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core
2016-05-13 6:29 ` [U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core Miao Yan
@ 2016-05-13 14:00 ` Bin Meng
2016-05-16 9:39 ` Miao Yan
2016-05-16 8:47 ` Bin Meng
1 sibling, 1 reply; 40+ messages in thread
From: Bin Meng @ 2016-05-13 14:00 UTC (permalink / raw)
To: u-boot
Hi Miao,
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> This patch splits qfw command interface and qfw core function into two
> files, and introduces a new Kconfig option (CONFIG_QFW). for
> qfw core.
>
> Now when qfw command interface is enabled, it will automatically select
> qfw core. This patch also makes the ACPI table generation select
> CONFIG_QFW.
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
> arch/x86/Kconfig | 2 +-
> arch/x86/cpu/mp_init.c | 6 +-
> arch/x86/cpu/qemu/Makefile | 3 +-
> arch/x86/cpu/qemu/acpi_table.c | 2 +
> arch/x86/cpu/qemu/qemu.c | 4 +
> cmd/Kconfig | 1 +
> cmd/Makefile | 2 +-
> cmd/cmd_qfw.c | 182 +++++++++++++++++++++
> cmd/qemu_fw_cfg.c | 353 -----------------------------------------
> common/Kconfig | 1 +
> drivers/misc/Kconfig | 6 +
> drivers/misc/Makefile | 1 +
> drivers/misc/qemu_fw_cfg.c | 185 +++++++++++++++++++++
> 13 files changed, 390 insertions(+), 358 deletions(-)
> create mode 100644 cmd/cmd_qfw.c
> delete mode 100644 cmd/qemu_fw_cfg.c
> create mode 100644 drivers/misc/qemu_fw_cfg.c
>
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index a60e0da..2f63170 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -436,7 +436,7 @@ config GENERATE_MP_TABLE
> config GENERATE_ACPI_TABLE
> bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
> default n
> - select QEMU_FW_CFG if QEMU
> + select QFW if QEMU
> help
> The Advanced Configuration and Power Interface (ACPI) specification
> provides an open standard for device configuration and management
> diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
> index 13bec7a..109b3d7 100644
> --- a/arch/x86/cpu/mp_init.c
> +++ b/arch/x86/cpu/mp_init.c
> @@ -11,7 +11,9 @@
> #include <dm.h>
> #include <errno.h>
> #include <malloc.h>
> +#ifdef CONFIG_QFW
> #include <qemu_fw_cfg.h>
> +#endif
There is no need to wrap header file with #ifdef.
> #include <asm/atomic.h>
> #include <asm/cpu.h>
> #include <asm/interrupt.h>
> @@ -420,7 +422,7 @@ static int init_bsp(struct udevice **devp)
> return 0;
> }
>
> -#ifdef CONFIG_QEMU
> +#ifdef CONFIG_QFW
> static int qemu_cpu_fixup(void)
> {
> int ret;
> @@ -496,7 +498,7 @@ int mp_init(struct mp_params *p)
> if (ret)
> return ret;
>
> -#ifdef CONFIG_QEMU
> +#ifdef CONFIG_QFW
> ret = qemu_cpu_fixup();
> if (ret)
> return ret;
> diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
> index 43ee4bd..7c08c3d 100644
> --- a/arch/x86/cpu/qemu/Makefile
> +++ b/arch/x86/cpu/qemu/Makefile
> @@ -7,5 +7,6 @@
> ifndef CONFIG_EFI_STUB
> obj-y += car.o dram.o
> endif
> -obj-y += cpu.o qemu.o
> +obj-y += qemu.o
> +obj-$(CONFIG_QFW) += cpu.o
> obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
> diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c
> index b17fa03..4584fc7 100644
> --- a/arch/x86/cpu/qemu/acpi_table.c
> +++ b/arch/x86/cpu/qemu/acpi_table.c
> @@ -8,7 +8,9 @@
> #include <command.h>
> #include <errno.h>
> #include <malloc.h>
> +#ifdef CONFIG_QFW
> #include <qemu_fw_cfg.h>
> +#endif
ditto.
> #include <asm/io.h>
> #include <asm/tables.h>
> #include <asm/e820.h>
> diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c
> index b41e4ec..2631e99 100644
> --- a/arch/x86/cpu/qemu/qemu.c
> +++ b/arch/x86/cpu/qemu/qemu.c
> @@ -6,7 +6,9 @@
>
> #include <common.h>
> #include <pci.h>
> +#ifdef CONFIG_QFW
> #include <qemu_fw_cfg.h>
> +#endif
ditto.
> #include <asm/irq.h>
> #include <asm/post.h>
> #include <asm/processor.h>
> @@ -88,7 +90,9 @@ static void qemu_chipset_init(void)
> enable_pm_ich9();
> }
>
> +#ifdef CONFIG_QFW
> qemu_fwcfg_init();
> +#endif
> }
>
> int arch_cpu_init(void)
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index c0fffe3..08b761f 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -596,6 +596,7 @@ config CMD_SOUND
> config CMD_QEMU_FW_CFG
> bool "qfw"
> depends on X86
> + select QFW
> help
> This provides access to the QEMU firmware interface. The main
> feature is to allow easy loading of files passed to qemu-system
> diff --git a/cmd/Makefile b/cmd/Makefile
> index f99e67d..31e4da7 100644
> --- a/cmd/Makefile
> +++ b/cmd/Makefile
> @@ -105,7 +105,7 @@ endif
> obj-y += pcmcia.o
> obj-$(CONFIG_CMD_PORTIO) += portio.o
> obj-$(CONFIG_CMD_PXE) += pxe.o
> -obj-$(CONFIG_CMD_QEMU_FW_CFG) += qemu_fw_cfg.o
> +obj-$(CONFIG_CMD_QEMU_FW_CFG) += cmd_qfw.o
> obj-$(CONFIG_CMD_READ) += read.o
> obj-$(CONFIG_CMD_REGINFO) += reginfo.o
> obj-$(CONFIG_CMD_REISER) += reiser.o
> diff --git a/cmd/cmd_qfw.c b/cmd/cmd_qfw.c
> new file mode 100644
> index 0000000..eefaf65
> --- /dev/null
> +++ b/cmd/cmd_qfw.c
> @@ -0,0 +1,182 @@
> +/*
> + * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <command.h>
> +#include <errno.h>
> +#include <qemu_fw_cfg.h>
> +
> +/*
> + * This function prepares kernel for zboot. It loads kernel data
> + * to 'load_addr', initrd to 'initrd_addr' and kernel command
> + * line using qemu fw_cfg interface.
> + */
> +static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
> +{
> + char *data_addr;
> + uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
> +
> + qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
> + qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
> +
> + if (setup_size == 0 || kernel_size == 0) {
> + printf("warning: no kernel available\n");
> + return -1;
> + }
> +
> + data_addr = load_addr;
> + qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
> + le32_to_cpu(setup_size), data_addr);
> + data_addr += le32_to_cpu(setup_size);
> +
> + qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
> + le32_to_cpu(kernel_size), data_addr);
> + data_addr += le32_to_cpu(kernel_size);
> +
> + data_addr = initrd_addr;
> + qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
> + if (initrd_size == 0) {
> + printf("warning: no initrd available\n");
> + } else {
> + qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
> + le32_to_cpu(initrd_size), data_addr);
> + data_addr += le32_to_cpu(initrd_size);
> + }
> +
> + qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
> + if (cmdline_size) {
> + qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
> + le32_to_cpu(cmdline_size), data_addr);
> + /*
> + * if kernel cmdline only contains '\0', (e.g. no -append
> + * when invoking qemu), do not update bootargs
> + */
> + if (*data_addr != '\0') {
> + if (setenv("bootargs", data_addr) < 0)
> + printf("warning: unable to change bootargs\n");
> + }
> + }
> +
> + printf("loading kernel to address %p size %x", load_addr,
> + le32_to_cpu(kernel_size));
> + if (initrd_size)
> + printf(" initrd %p size %x\n",
> + initrd_addr,
> + le32_to_cpu(initrd_size));
> + else
> + printf("\n");
> +
> + return 0;
> +}
> +
> +static int qemu_fwcfg_list_firmware(void)
> +{
> + int ret;
> + struct fw_cfg_file_iter iter;
> + struct fw_file *file;
> +
> + /* make sure fw_list is loaded */
> + ret = qemu_fwcfg_read_firmware_list();
> + if (ret)
> + return ret;
> +
> +
> + for (file = qemu_fwcfg_file_iter_init(&iter);
> + !qemu_fwcfg_file_iter_end(&iter);
> + file = qemu_fwcfg_file_iter_next(&iter)) {
> + printf("%-56s\n", file->cfg.name);
> + }
> +
> + return 0;
> +}
> +
> +static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
> + int argc, char * const argv[])
> +{
> + if (qemu_fwcfg_list_firmware() < 0)
> + return CMD_RET_FAILURE;
> +
> + return 0;
> +}
> +
> +static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
> + int argc, char * const argv[])
> +{
> + int ret = qemu_fwcfg_online_cpus();
> + if (ret < 0) {
> + printf("QEMU fw_cfg interface not found\n");
> + return CMD_RET_FAILURE;
> + }
> +
> + printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
> +
> + return 0;
> +}
> +
> +static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
> + int argc, char * const argv[])
> +{
> + char *env;
> + void *load_addr;
> + void *initrd_addr;
> +
> + env = getenv("loadaddr");
> + load_addr = env ?
> + (void *)simple_strtoul(env, NULL, 16) :
> + (void *)CONFIG_LOADADDR;
> +
> + env = getenv("ramdiskaddr");
> + initrd_addr = env ?
> + (void *)simple_strtoul(env, NULL, 16) :
> + (void *)CONFIG_RAMDISK_ADDR;
> +
> + if (argc == 2) {
> + load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
> + initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
> + } else if (argc == 1) {
> + load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
> + }
> +
> + return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
> +}
> +
> +static cmd_tbl_t fwcfg_commands[] = {
> + U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
> + U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
> + U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
> +};
> +
> +static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + int ret;
> + cmd_tbl_t *fwcfg_cmd;
> +
> + if (!qemu_fwcfg_present()) {
> + printf("QEMU fw_cfg interface not found\n");
> + return CMD_RET_USAGE;
> + }
> +
> + fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
> + ARRAY_SIZE(fwcfg_commands));
> + argc -= 2;
> + argv += 2;
> + if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
> + return CMD_RET_USAGE;
> +
> + ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
> +
> + return cmd_process_error(fwcfg_cmd, ret);
> +}
> +
> +U_BOOT_CMD(
> + qfw, 4, 1, do_qemu_fw,
> + "QEMU firmware interface",
> + "<command>\n"
> + " - list : print firmware(s) currently loaded\n"
> + " - cpus : print online cpu number\n"
> + " - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
> +)
> +
> diff --git a/cmd/qemu_fw_cfg.c b/cmd/qemu_fw_cfg.c
> deleted file mode 100644
> index aab6b1a..0000000
> --- a/cmd/qemu_fw_cfg.c
> +++ /dev/null
> @@ -1,353 +0,0 @@
> -/*
> - * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
> - *
> - * SPDX-License-Identifier: GPL-2.0+
> - */
> -
> -#include <common.h>
> -#include <command.h>
> -#include <errno.h>
> -#include <malloc.h>
> -#include <qemu_fw_cfg.h>
> -#include <asm/io.h>
> -#include <linux/list.h>
> -
> -static bool fwcfg_present;
> -static bool fwcfg_dma_present;
> -
> -static LIST_HEAD(fw_list);
> -
> -/* Read configuration item using fw_cfg PIO interface */
> -static void qemu_fwcfg_read_entry_pio(uint16_t entry,
> - uint32_t size, void *address)
> -{
> - uint32_t i = 0;
> - uint8_t *data = address;
> -
> - /*
> - * writting FW_CFG_INVALID will cause read operation to resume at
> - * last offset, otherwise read will start at offset 0
> - */
> - if (entry != FW_CFG_INVALID)
> - outw(entry, FW_CONTROL_PORT);
> - while (size--)
> - data[i++] = inb(FW_DATA_PORT);
> -}
> -
> -/* Read configuration item using fw_cfg DMA interface */
> -static void qemu_fwcfg_read_entry_dma(uint16_t entry,
> - uint32_t size, void *address)
> -{
> - struct fw_cfg_dma_access dma;
> -
> - dma.length = cpu_to_be32(size);
> - dma.address = cpu_to_be64((uintptr_t)address);
> - dma.control = cpu_to_be32(FW_CFG_DMA_READ);
> -
> - /*
> - * writting FW_CFG_INVALID will cause read operation to resume at
> - * last offset, otherwise read will start at offset 0
> - */
> - if (entry != FW_CFG_INVALID)
> - dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
> -
> - barrier();
> -
> - debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
> - address, size, be32_to_cpu(dma.control));
> -
> - outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
> -
> - while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
> - __asm__ __volatile__ ("pause");
> -}
> -
> -bool qemu_fwcfg_present(void)
> -{
> - return fwcfg_present;
> -}
> -
> -bool qemu_fwcfg_dma_present(void)
> -{
> - return fwcfg_dma_present;
> -}
> -
> -void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
> -{
> - if (fwcfg_dma_present)
> - qemu_fwcfg_read_entry_dma(entry, length, address);
> - else
> - qemu_fwcfg_read_entry_pio(entry, length, address);
> -}
> -
> -int qemu_fwcfg_online_cpus(void)
> -{
> - uint16_t nb_cpus;
> -
> - if (!fwcfg_present)
> - return -ENODEV;
> -
> - qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
> -
> - return le16_to_cpu(nb_cpus);
> -}
> -
> -/*
> - * This function prepares kernel for zboot. It loads kernel data
> - * to 'load_addr', initrd to 'initrd_addr' and kernel command
> - * line using qemu fw_cfg interface.
> - */
> -static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
> -{
> - char *data_addr;
> - uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
> -
> - qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
> - qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
> -
> - if (setup_size == 0 || kernel_size == 0) {
> - printf("warning: no kernel available\n");
> - return -1;
> - }
> -
> - data_addr = load_addr;
> - qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
> - le32_to_cpu(setup_size), data_addr);
> - data_addr += le32_to_cpu(setup_size);
> -
> - qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
> - le32_to_cpu(kernel_size), data_addr);
> - data_addr += le32_to_cpu(kernel_size);
> -
> - data_addr = initrd_addr;
> - qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
> - if (initrd_size == 0) {
> - printf("warning: no initrd available\n");
> - } else {
> - qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
> - le32_to_cpu(initrd_size), data_addr);
> - data_addr += le32_to_cpu(initrd_size);
> - }
> -
> - qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
> - if (cmdline_size) {
> - qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
> - le32_to_cpu(cmdline_size), data_addr);
> - /*
> - * if kernel cmdline only contains '\0', (e.g. no -append
> - * when invoking qemu), do not update bootargs
> - */
> - if (*data_addr != '\0') {
> - if (setenv("bootargs", data_addr) < 0)
> - printf("warning: unable to change bootargs\n");
> - }
> - }
> -
> - printf("loading kernel to address %p size %x", load_addr,
> - le32_to_cpu(kernel_size));
> - if (initrd_size)
> - printf(" initrd %p size %x\n",
> - initrd_addr,
> - le32_to_cpu(initrd_size));
> - else
> - printf("\n");
> -
> - return 0;
> -}
> -
> -int qemu_fwcfg_read_firmware_list(void)
> -{
> - int i;
> - uint32_t count;
> - struct fw_file *file;
> - struct list_head *entry;
> -
> - /* don't read it twice */
> - if (!list_empty(&fw_list))
> - return 0;
> -
> - qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
> - if (!count)
> - return 0;
> -
> - count = be32_to_cpu(count);
> - for (i = 0; i < count; i++) {
> - file = malloc(sizeof(*file));
> - if (!file) {
> - printf("error: allocating resource\n");
> - goto err;
> - }
> - qemu_fwcfg_read_entry(FW_CFG_INVALID,
> - sizeof(struct fw_cfg_file), &file->cfg);
> - file->addr = 0;
> - list_add_tail(&file->list, &fw_list);
> - }
> -
> - return 0;
> -
> -err:
> - list_for_each(entry, &fw_list) {
> - file = list_entry(entry, struct fw_file, list);
> - free(file);
> - }
> -
> - return -ENOMEM;
> -}
> -
> -struct fw_file *qemu_fwcfg_find_file(const char *name)
> -{
> - struct list_head *entry;
> - struct fw_file *file;
> -
> - list_for_each(entry, &fw_list) {
> - file = list_entry(entry, struct fw_file, list);
> - if (!strcmp(file->cfg.name, name))
> - return file;
> - }
> -
> - return NULL;
> -}
> -
> -struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
> -{
> - iter->entry = fw_list.next;
> - return list_entry(iter->entry, struct fw_file, list);
> -}
> -
> -struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter)
> -{
> - iter->entry = iter->entry->next;
> - return list_entry(iter->entry, struct fw_file, list);
> -}
> -
> -bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
> -{
> - return iter->entry == &fw_list;
> -}
> -
> -static int qemu_fwcfg_list_firmware(void)
> -{
> - int ret;
> - struct fw_cfg_file_iter iter;
> - struct fw_file *file;
> -
> - /* make sure fw_list is loaded */
> - ret = qemu_fwcfg_read_firmware_list();
> - if (ret)
> - return ret;
> -
> -
> - for (file = qemu_fwcfg_file_iter_init(&iter);
> - !qemu_fwcfg_file_iter_end(&iter);
> - file = qemu_fwcfg_file_iter_next(&iter)) {
> - printf("%-56s\n", file->cfg.name);
> - }
> -
> - return 0;
> -}
> -
> -void qemu_fwcfg_init(void)
> -{
> - uint32_t qemu;
> - uint32_t dma_enabled;
> -
> - fwcfg_present = false;
> - fwcfg_dma_present = false;
> -
> - qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
> - if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
> - fwcfg_present = true;
> -
> - if (fwcfg_present) {
> - qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
> - if (dma_enabled & FW_CFG_DMA_ENABLED)
> - fwcfg_dma_present = true;
> - }
> -}
> -
> -static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
> - int argc, char * const argv[])
> -{
> - if (qemu_fwcfg_list_firmware() < 0)
> - return CMD_RET_FAILURE;
> -
> - return 0;
> -}
> -
> -static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
> - int argc, char * const argv[])
> -{
> - int ret = qemu_fwcfg_online_cpus();
> - if (ret < 0) {
> - printf("QEMU fw_cfg interface not found\n");
> - return CMD_RET_FAILURE;
> - }
> -
> - printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
> -
> - return 0;
> -}
> -
> -static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
> - int argc, char * const argv[])
> -{
> - char *env;
> - void *load_addr;
> - void *initrd_addr;
> -
> - env = getenv("loadaddr");
> - load_addr = env ?
> - (void *)simple_strtoul(env, NULL, 16) :
> - (void *)CONFIG_LOADADDR;
> -
> - env = getenv("ramdiskaddr");
> - initrd_addr = env ?
> - (void *)simple_strtoul(env, NULL, 16) :
> - (void *)CONFIG_RAMDISK_ADDR;
> -
> - if (argc == 2) {
> - load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
> - initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
> - } else if (argc == 1) {
> - load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
> - }
> -
> - return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
> -}
> -
> -static cmd_tbl_t fwcfg_commands[] = {
> - U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
> - U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
> - U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
> -};
> -
> -static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> -{
> - int ret;
> - cmd_tbl_t *fwcfg_cmd;
> -
> - if (!qemu_fwcfg_present()) {
> - printf("QEMU fw_cfg interface not found\n");
> - return CMD_RET_USAGE;
> - }
> -
> - fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
> - ARRAY_SIZE(fwcfg_commands));
> - argc -= 2;
> - argv += 2;
> - if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
> - return CMD_RET_USAGE;
> -
> - ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
> -
> - return cmd_process_error(fwcfg_cmd, ret);
> -}
> -
> -U_BOOT_CMD(
> - qfw, 4, 1, do_qemu_fw,
> - "QEMU firmware interface",
> - "<command>\n"
> - " - list : print firmware(s) currently loaded\n"
> - " - cpus : print online cpu number\n"
> - " - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
> -)
> diff --git a/common/Kconfig b/common/Kconfig
> index 067545d..8ca5a68 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -124,3 +124,4 @@ config CONSOLE_RECORD_IN_SIZE
> tstc() and getc() will use this in preference to real device input.
> The buffer is allocated immediately after the malloc() region is
> ready.
> +
What is this for?
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index af8667f..fa53700 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -138,4 +138,10 @@ config WINBOND_W83627
> legacy UART or other devices in the Winbond Super IO chips
> on X86 platforms.
>
> +config QFW
> + bool
> + help
> + Hidden option to enable QEMU fw_cfg interface. This will be selected by
> + either CONFIG_CMD_QEMU_FW_CFG or CONFIG_GENERATE_ACPI_TABLE.
> +
> endmenu
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 5969d34..4893086 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -43,3 +43,4 @@ obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
> obj-$(CONFIG_RESET) += reset-uclass.o
> obj-$(CONFIG_FSL_DEVICE_DISABLE) += fsl_devdis.o
> obj-$(CONFIG_WINBOND_W83627) += winbond_w83627.o
> +obj-$(CONFIG_QFW) += qemu_fw_cfg.o
> diff --git a/drivers/misc/qemu_fw_cfg.c b/drivers/misc/qemu_fw_cfg.c
> new file mode 100644
> index 0000000..e726059
> --- /dev/null
> +++ b/drivers/misc/qemu_fw_cfg.c
> @@ -0,0 +1,185 @@
> +/*
> + * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <command.h>
> +#include <errno.h>
> +#include <malloc.h>
> +#include <qemu_fw_cfg.h>
> +#include <asm/io.h>
> +#include <linux/list.h>
> +
> +static bool fwcfg_present;
> +static bool fwcfg_dma_present;
> +
> +static LIST_HEAD(fw_list);
> +
> +/* Read configuration item using fw_cfg PIO interface */
> +static void qemu_fwcfg_read_entry_pio(uint16_t entry,
> + uint32_t size, void *address)
> +{
> + uint32_t i = 0;
> + uint8_t *data = address;
> +
> + /*
> + * writting FW_CFG_INVALID will cause read operation to resume at
> + * last offset, otherwise read will start at offset 0
> + */
> + if (entry != FW_CFG_INVALID)
> + outw(entry, FW_CONTROL_PORT);
> + while (size--)
> + data[i++] = inb(FW_DATA_PORT);
> +}
> +
> +/* Read configuration item using fw_cfg DMA interface */
> +static void qemu_fwcfg_read_entry_dma(uint16_t entry,
> + uint32_t size, void *address)
> +{
> + struct fw_cfg_dma_access dma;
> +
> + dma.length = cpu_to_be32(size);
> + dma.address = cpu_to_be64((uintptr_t)address);
> + dma.control = cpu_to_be32(FW_CFG_DMA_READ);
> +
> + /*
> + * writting FW_CFG_INVALID will cause read operation to resume at
> + * last offset, otherwise read will start at offset 0
> + */
> + if (entry != FW_CFG_INVALID)
> + dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
> +
> + barrier();
> +
> + debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
> + address, size, be32_to_cpu(dma.control));
> +
> + outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
> +
> + while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
> + __asm__ __volatile__ ("pause");
> +}
> +
> +bool qemu_fwcfg_present(void)
> +{
> + return fwcfg_present;
> +}
> +
> +bool qemu_fwcfg_dma_present(void)
> +{
> + return fwcfg_dma_present;
> +}
> +
> +void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
> +{
> + if (fwcfg_dma_present)
> + qemu_fwcfg_read_entry_dma(entry, length, address);
> + else
> + qemu_fwcfg_read_entry_pio(entry, length, address);
> +}
> +
> +int qemu_fwcfg_online_cpus(void)
> +{
> + uint16_t nb_cpus;
> +
> + if (!fwcfg_present)
> + return -ENODEV;
> +
> + qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
> +
> + return le16_to_cpu(nb_cpus);
> +}
> +
> +int qemu_fwcfg_read_firmware_list(void)
> +{
> + int i;
> + uint32_t count;
> + struct fw_file *file;
> + struct list_head *entry;
> +
> + /* don't read it twice */
> + if (!list_empty(&fw_list))
> + return 0;
> +
> + qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
> + if (!count)
> + return 0;
> +
> + count = be32_to_cpu(count);
> + for (i = 0; i < count; i++) {
> + file = malloc(sizeof(*file));
> + if (!file) {
> + printf("error: allocating resource\n");
> + goto err;
> + }
> + qemu_fwcfg_read_entry(FW_CFG_INVALID,
> + sizeof(struct fw_cfg_file), &file->cfg);
> + file->addr = 0;
> + list_add_tail(&file->list, &fw_list);
> + }
> +
> + return 0;
> +
> +err:
> + list_for_each(entry, &fw_list) {
> + file = list_entry(entry, struct fw_file, list);
> + free(file);
> + }
> +
> + return -ENOMEM;
> +}
> +
> +struct fw_file *qemu_fwcfg_find_file(const char *name)
> +{
> + struct list_head *entry;
> + struct fw_file *file;
> +
> + list_for_each(entry, &fw_list) {
> + file = list_entry(entry, struct fw_file, list);
> + if (!strcmp(file->cfg.name, name))
> + return file;
> + }
> +
> + return NULL;
> +}
> +
> +struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
> +{
> + iter->entry = fw_list.next;
> + return list_entry((struct list_head *)iter->entry,
> + struct fw_file, list);
> +}
> +
> +struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter)
> +{
> + iter->entry = ((struct list_head *)iter->entry)->next;
> + return list_entry((struct list_head *)iter->entry,
> + struct fw_file, list);
> +}
> +
> +bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
> +{
> + return iter->entry == &fw_list;
> +}
> +
> +void qemu_fwcfg_init(void)
> +{
> + uint32_t qemu;
> + uint32_t dma_enabled;
> +
> + fwcfg_present = false;
> + fwcfg_dma_present = false;
> +
> + qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
> + if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
> + fwcfg_present = true;
> +
> + if (fwcfg_present) {
> + qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
> + if (dma_enabled & FW_CFG_DMA_ENABLED)
> + fwcfg_dma_present = true;
> + }
> +}
> +
> --
When applying this patch, I got:
$ git am U-Boot-05-12-x86-qemu-split-qfw-command-interface-and-qfw-core.patch
Applying: x86: qemu: split qfw command interface and qfw core
/git/u-boot/.git/rebase-apply/patch:327: new blank line at EOF.
+
/git/u-boot/.git/rebase-apply/patch:695: new blank line at EOF.
+
/git/u-boot/.git/rebase-apply/patch:910: new blank line at EOF.
+
warning: 3 lines add whitespace errors.
Can you please fix these?
Regards,
Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 06/12] x86: qemu: move x86 specific operations out of qfw core
2016-05-13 6:29 ` [U-Boot] [PATCH 06/12] x86: qemu: move x86 specific operations out of " Miao Yan
@ 2016-05-13 14:00 ` Bin Meng
0 siblings, 0 replies; 40+ messages in thread
From: Bin Meng @ 2016-05-13 14:00 UTC (permalink / raw)
To: u-boot
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> The original implementation of qfw includes several x86 specific
> operations, like directly calling outb/inb and using some inline
> assembly code which prevents it being ported to other architectures.
>
> This patch adds callback functions and moves those to arch/x86/
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
> arch/x86/cpu/qemu/qemu.c | 39 ++++++++++++++++++++++++++++++++++++++-
> drivers/misc/qemu_fw_cfg.c | 30 +++++++++++++-----------------
> include/qemu_fw_cfg.h | 15 +++++++++------
> 3 files changed, 60 insertions(+), 24 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 07/12] x86: qemu: add comment about qfw register endianness
2016-05-13 6:29 ` [U-Boot] [PATCH 07/12] x86: qemu: add comment about qfw register endianness Miao Yan
@ 2016-05-13 14:00 ` Bin Meng
0 siblings, 0 replies; 40+ messages in thread
From: Bin Meng @ 2016-05-13 14:00 UTC (permalink / raw)
To: u-boot
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> This patch adds some comments about qfw register endianness for clarity.
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
> arch/x86/cpu/qemu/qemu.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 08/12] cmd: qfw: rename qemu_fw_cfg.[c|h] to qfw.[c|h]
2016-05-13 6:29 ` [U-Boot] [PATCH 08/12] cmd: qfw: rename qemu_fw_cfg.[c|h] to qfw.[c|h] Miao Yan
@ 2016-05-13 14:00 ` Bin Meng
0 siblings, 0 replies; 40+ messages in thread
From: Bin Meng @ 2016-05-13 14:00 UTC (permalink / raw)
To: u-boot
Hi Miao,
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> Make file names aligned with CONFIG_QFW
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
> arch/x86/cpu/mp_init.c | 2 +-
> arch/x86/cpu/qemu/acpi_table.c | 2 +-
> arch/x86/cpu/qemu/cpu.c | 2 +-
> arch/x86/cpu/qemu/qemu.c | 2 +-
> cmd/cmd_qfw.c | 2 +-
> drivers/misc/Makefile | 2 +-
> drivers/misc/qemu_fw_cfg.c | 181 -----------------------------------------
> drivers/misc/qfw.c | 181 +++++++++++++++++++++++++++++++++++++++++
> include/qemu_fw_cfg.h | 176 ---------------------------------------
> include/qfw.h | 176 +++++++++++++++++++++++++++++++++++++++
Please use 'git mv' for such operation.
> 10 files changed, 363 insertions(+), 363 deletions(-)
> delete mode 100644 drivers/misc/qemu_fw_cfg.c
> create mode 100644 drivers/misc/qfw.c
> delete mode 100644 include/qemu_fw_cfg.h
> create mode 100644 include/qfw.h
>
Regards,
Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 09/12] cmd: qfw: workaround qfw build issue
2016-05-13 6:29 ` [U-Boot] [PATCH 09/12] cmd: qfw: workaround qfw build issue Miao Yan
@ 2016-05-13 14:00 ` Bin Meng
2016-05-13 20:46 ` Tom Rini
0 siblings, 1 reply; 40+ messages in thread
From: Bin Meng @ 2016-05-13 14:00 UTC (permalink / raw)
To: u-boot
Hi Miao,
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> The qfw command interface makes use of CONFIG_LOADADDR and
> CONFIG_RAMDISKADDR to setup kernel. But not all boards have these macro,
> which causes build problem on those platforms.
>
> This patch fixes this issue.
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Looks good.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
But the commit title "workaround" looks to be a workaround, which does
not sound that good.
> ---
> cmd/cmd_qfw.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/cmd/cmd_qfw.c b/cmd/cmd_qfw.c
> index aeb576b..13ad673 100644
> --- a/cmd/cmd_qfw.c
> +++ b/cmd/cmd_qfw.c
> @@ -126,12 +126,20 @@ static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
> env = getenv("loadaddr");
> load_addr = env ?
> (void *)simple_strtoul(env, NULL, 16) :
> +#ifdef CONFIG_LOADADDR
> (void *)CONFIG_LOADADDR;
> +#else
> + NULL;
> +#endif
>
> env = getenv("ramdiskaddr");
> initrd_addr = env ?
> (void *)simple_strtoul(env, NULL, 16) :
> +#ifdef CONFIG_RAMDISK_ADDR
> (void *)CONFIG_RAMDISK_ADDR;
> +#else
> + NULL;
> +#endif
>
> if (argc == 2) {
> load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
> @@ -140,6 +148,11 @@ static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
> load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
> }
>
> + if (!load_addr || !initrd_addr) {
> + printf("missing load or initrd address\n");
> + return CMD_RET_FAILURE;
> + }
> +
> return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
> }
>
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 10/12] cmd: qfw: do not depend on x86
2016-05-13 6:29 ` [U-Boot] [PATCH 10/12] cmd: qfw: do not depend on x86 Miao Yan
@ 2016-05-13 14:00 ` Bin Meng
2016-05-16 9:44 ` Miao Yan
0 siblings, 1 reply; 40+ messages in thread
From: Bin Meng @ 2016-05-13 14:00 UTC (permalink / raw)
To: u-boot
Hi Miao,
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> The qfw command interface used to depend on X86, this patch removes
> this restriction so it can be built for sandbox for testing. For normal
> usage, it can only be used with CONFIG_QEMU.
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Would you prepare a patch to enable this on Sandbox?
> cmd/Kconfig | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index 08b761f..01870cb 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -595,7 +595,6 @@ config CMD_SOUND
>
> config CMD_QEMU_FW_CFG
> bool "qfw"
> - depends on X86
> select QFW
> help
> This provides access to the QEMU firmware interface. The main
> --
Regards,
Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 11/12] cmd: qfw: bring ACPI generation code into qfw core
2016-05-13 6:29 ` [U-Boot] [PATCH 11/12] cmd: qfw: bring ACPI generation code into qfw core Miao Yan
@ 2016-05-13 14:01 ` Bin Meng
0 siblings, 0 replies; 40+ messages in thread
From: Bin Meng @ 2016-05-13 14:01 UTC (permalink / raw)
To: u-boot
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> Loading ACPI table from QEMU's fw_cfg interface is not x86 specific
> (ARM64 may also make user of it). So move the code common place.
typo: use
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
> arch/x86/cpu/qemu/acpi_table.c | 211 -----------------------------------------
> drivers/misc/qfw.c | 206 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 206 insertions(+), 211 deletions(-)
>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 12/12] x86: qemu: rename qemu/acpi_table.c
2016-05-13 6:29 ` [U-Boot] [PATCH 12/12] x86: qemu: rename qemu/acpi_table.c Miao Yan
@ 2016-05-13 14:01 ` Bin Meng
2016-05-16 9:40 ` Miao Yan
0 siblings, 1 reply; 40+ messages in thread
From: Bin Meng @ 2016-05-13 14:01 UTC (permalink / raw)
To: u-boot
Hi Miao,
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> Rename qemu/acpi_table.c to qemu/e820.c, because ACPI stuff is moved
> to qfw core, this file only contains code for installing e820 table.
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
> arch/x86/cpu/qemu/Makefile | 3 +--
> arch/x86/cpu/qemu/acpi_table.c | 43 ------------------------------------------
> arch/x86/cpu/qemu/e820.c | 43 ++++++++++++++++++++++++++++++++++++++++++
Please use "git mv".
> 3 files changed, 44 insertions(+), 45 deletions(-)
> delete mode 100644 arch/x86/cpu/qemu/acpi_table.c
> create mode 100644 arch/x86/cpu/qemu/e820.c
>
Regards,
Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 03/12] cmd: qfw: remove qemu_fwcfg_free_files()
2016-05-13 14:00 ` Bin Meng
@ 2016-05-13 20:46 ` Tom Rini
2016-05-16 9:47 ` Miao Yan
0 siblings, 1 reply; 40+ messages in thread
From: Tom Rini @ 2016-05-13 20:46 UTC (permalink / raw)
To: u-boot
On Fri, May 13, 2016 at 10:00:05PM +0800, Bin Meng wrote:
> Hi Miao,
>
> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> > This patch is part of the qfw refactor work.
> >
> > The qemu_fwcfg_free_files() function is only used in error handling in
> > ACPI table generation, let's not make this a core function and move it
> > to the right place.
> >
>
> But I suspect this API may still be needed in some other scenarioes?
> eg: for future ARM64 ACPI?
Yes, as it stands currently the code looks likely useful for non-x86
QEMU+ACPI.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160513/5daa6869/attachment.sig>
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 09/12] cmd: qfw: workaround qfw build issue
2016-05-13 14:00 ` Bin Meng
@ 2016-05-13 20:46 ` Tom Rini
2016-05-16 9:44 ` Miao Yan
0 siblings, 1 reply; 40+ messages in thread
From: Tom Rini @ 2016-05-13 20:46 UTC (permalink / raw)
To: u-boot
On Fri, May 13, 2016 at 10:00:37PM +0800, Bin Meng wrote:
> Hi Miao,
>
> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> > The qfw command interface makes use of CONFIG_LOADADDR and
> > CONFIG_RAMDISKADDR to setup kernel. But not all boards have these macro,
> > which causes build problem on those platforms.
> >
> > This patch fixes this issue.
> >
> > Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
>
> Looks good.
>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
>
> But the commit title "workaround" looks to be a workaround, which does
> not sound that good.
Yes, maybe just say that it's no longer requiring default values?
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160513/abb6d20d/attachment.sig>
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core
2016-05-13 6:29 ` [U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core Miao Yan
2016-05-13 14:00 ` Bin Meng
@ 2016-05-16 8:47 ` Bin Meng
2016-05-16 9:50 ` Miao Yan
1 sibling, 1 reply; 40+ messages in thread
From: Bin Meng @ 2016-05-16 8:47 UTC (permalink / raw)
To: u-boot
Hi Miao,
On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> This patch splits qfw command interface and qfw core function into two
> files, and introduces a new Kconfig option (CONFIG_QFW). for
> qfw core.
>
> Now when qfw command interface is enabled, it will automatically select
> qfw core. This patch also makes the ACPI table generation select
> CONFIG_QFW.
>
> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> ---
> arch/x86/Kconfig | 2 +-
> arch/x86/cpu/mp_init.c | 6 +-
> arch/x86/cpu/qemu/Makefile | 3 +-
> arch/x86/cpu/qemu/acpi_table.c | 2 +
> arch/x86/cpu/qemu/qemu.c | 4 +
> cmd/Kconfig | 1 +
> cmd/Makefile | 2 +-
> cmd/cmd_qfw.c | 182 +++++++++++++++++++++
The file name should be qfw.c without cmd_
> cmd/qemu_fw_cfg.c | 353 -----------------------------------------
And I suspect you can also use "git mv" for cmd/qemu_fw_cfg.c. "git mv
cmd/qemu_fw_cfg.c cmd/qfw.c"
> common/Kconfig | 1 +
> drivers/misc/Kconfig | 6 +
> drivers/misc/Makefile | 1 +
> drivers/misc/qemu_fw_cfg.c | 185 +++++++++++++++++++++
> 13 files changed, 390 insertions(+), 358 deletions(-)
> create mode 100644 cmd/cmd_qfw.c
> delete mode 100644 cmd/qemu_fw_cfg.c
> create mode 100644 drivers/misc/qemu_fw_cfg.c
>
Regards,
Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 01/12] x86: qemu: fix ACPI Kconfig options
2016-05-13 13:59 ` Bin Meng
@ 2016-05-16 9:37 ` Miao Yan
0 siblings, 0 replies; 40+ messages in thread
From: Miao Yan @ 2016-05-16 9:37 UTC (permalink / raw)
To: u-boot
Hi Bin,
2016-05-13 21:59 GMT+08:00 Bin Meng <bmeng.cn@gmail.com>:
> Hi Miao,
>
> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
>> CONFIG_GENENRATE_ACPI_TABLE controls the generation of ACPI table which
>> uses U-Boot's built-in methods and CONFIG_QEMU_ACPI_TABLE controls whether
>> to load ACPI table from QEMU's fw_cfg interface.
>>
>> But with commit "697ec431469ce0a4c2fc2c02d8685d907491af84 x86: qemu: Drop
>> our own ACPI implementation", there is only one way to support ACPI table
>> for QEMU targets which is the fw_cfg interface. Having two Kconfig options
>> for this purpose is not necessary any more, so this patch consolidates
>> the two.
>>
>> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
>> ---
>> arch/x86/Kconfig | 10 +---------
>> arch/x86/cpu/qemu/Makefile | 2 +-
>> arch/x86/lib/Makefile | 2 +-
>> 3 files changed, 3 insertions(+), 11 deletions(-)
>>
>> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
>> index 4ef27dc..a60e0da 100644
>> --- a/arch/x86/Kconfig
>> +++ b/arch/x86/Kconfig
>> @@ -436,21 +436,13 @@ config GENERATE_MP_TABLE
>> config GENERATE_ACPI_TABLE
>> bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
>> default n
>> + select QEMU_FW_CFG if QEMU
>
> I think this should be CMD_QEMU_FW_CFG
Yes, will fix this. Thanks.
Miao
>
>> help
>> The Advanced Configuration and Power Interface (ACPI) specification
>> provides an open standard for device configuration and management
>> by the operating system. It defines platform-independent interfaces
>> for configuration and power management monitoring.
>>
>> -config QEMU_ACPI_TABLE
>> - bool "Load ACPI table from QEMU fw_cfg interface"
>> - depends on GENERATE_ACPI_TABLE && QEMU
>> - default y
>> - help
>> - By default, U-Boot generates its own ACPI tables. This option, if
>> - enabled, disables U-Boot's version and loads ACPI tables generated
>> - by QEMU.
>> -
>> config GENERATE_SMBIOS_TABLE
>> bool "Generate an SMBIOS (System Management BIOS) table"
>> default y
>> diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
>> index 97b965c..43ee4bd 100644
>> --- a/arch/x86/cpu/qemu/Makefile
>> +++ b/arch/x86/cpu/qemu/Makefile
>> @@ -8,4 +8,4 @@ ifndef CONFIG_EFI_STUB
>> obj-y += car.o dram.o
>> endif
>> obj-y += cpu.o qemu.o
>> -obj-$(CONFIG_QEMU_ACPI_TABLE) += acpi_table.o
>> +obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
>> diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
>> index dc90df2..ce5eb82 100644
>> --- a/arch/x86/lib/Makefile
>> +++ b/arch/x86/lib/Makefile
>> @@ -31,7 +31,7 @@ obj-$(CONFIG_X86_RAMTEST) += ramtest.o
>> obj-y += sfi.o
>> obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += smbios.o
>> obj-y += string.o
>> -ifndef CONFIG_QEMU_ACPI_TABLE
>> +ifndef CONFIG_QEMU
>> obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
>> endif
>> obj-y += tables.o
>> --
>
> Regards,
> Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core
2016-05-13 14:00 ` Bin Meng
@ 2016-05-16 9:39 ` Miao Yan
0 siblings, 0 replies; 40+ messages in thread
From: Miao Yan @ 2016-05-16 9:39 UTC (permalink / raw)
To: u-boot
Hi Bin,
2016-05-13 22:00 GMT+08:00 Bin Meng <bmeng.cn@gmail.com>:
> Hi Miao,
>
> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
>> This patch splits qfw command interface and qfw core function into two
>> files, and introduces a new Kconfig option (CONFIG_QFW). for
>> qfw core.
>>
>> Now when qfw command interface is enabled, it will automatically select
>> qfw core. This patch also makes the ACPI table generation select
>> CONFIG_QFW.
>>
>> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
>> ---
>> arch/x86/Kconfig | 2 +-
>> arch/x86/cpu/mp_init.c | 6 +-
>> arch/x86/cpu/qemu/Makefile | 3 +-
>> arch/x86/cpu/qemu/acpi_table.c | 2 +
>> arch/x86/cpu/qemu/qemu.c | 4 +
>> cmd/Kconfig | 1 +
>> cmd/Makefile | 2 +-
>> cmd/cmd_qfw.c | 182 +++++++++++++++++++++
>> cmd/qemu_fw_cfg.c | 353 -----------------------------------------
>> common/Kconfig | 1 +
>> drivers/misc/Kconfig | 6 +
>> drivers/misc/Makefile | 1 +
>> drivers/misc/qemu_fw_cfg.c | 185 +++++++++++++++++++++
>> 13 files changed, 390 insertions(+), 358 deletions(-)
>> create mode 100644 cmd/cmd_qfw.c
>> delete mode 100644 cmd/qemu_fw_cfg.c
>> create mode 100644 drivers/misc/qemu_fw_cfg.c
>>
>> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
>> index a60e0da..2f63170 100644
>> --- a/arch/x86/Kconfig
>> +++ b/arch/x86/Kconfig
>> @@ -436,7 +436,7 @@ config GENERATE_MP_TABLE
>> config GENERATE_ACPI_TABLE
>> bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
>> default n
>> - select QEMU_FW_CFG if QEMU
>> + select QFW if QEMU
>> help
>> The Advanced Configuration and Power Interface (ACPI) specification
>> provides an open standard for device configuration and management
>> diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
>> index 13bec7a..109b3d7 100644
>> --- a/arch/x86/cpu/mp_init.c
>> +++ b/arch/x86/cpu/mp_init.c
>> @@ -11,7 +11,9 @@
>> #include <dm.h>
>> #include <errno.h>
>> #include <malloc.h>
>> +#ifdef CONFIG_QFW
>> #include <qemu_fw_cfg.h>
>> +#endif
>
> There is no need to wrap header file with #ifdef.
OK. And will fix the reset of them.
>
>> #include <asm/atomic.h>
>> #include <asm/cpu.h>
>> #include <asm/interrupt.h>
>> @@ -420,7 +422,7 @@ static int init_bsp(struct udevice **devp)
>> return 0;
>> }
>>
>> -#ifdef CONFIG_QEMU
>> +#ifdef CONFIG_QFW
>> static int qemu_cpu_fixup(void)
>> {
>> int ret;
>> @@ -496,7 +498,7 @@ int mp_init(struct mp_params *p)
>> if (ret)
>> return ret;
>>
>> -#ifdef CONFIG_QEMU
>> +#ifdef CONFIG_QFW
>> ret = qemu_cpu_fixup();
>> if (ret)
>> return ret;
>> diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
>> index 43ee4bd..7c08c3d 100644
>> --- a/arch/x86/cpu/qemu/Makefile
>> +++ b/arch/x86/cpu/qemu/Makefile
>> @@ -7,5 +7,6 @@
>> ifndef CONFIG_EFI_STUB
>> obj-y += car.o dram.o
>> endif
>> -obj-y += cpu.o qemu.o
>> +obj-y += qemu.o
>> +obj-$(CONFIG_QFW) += cpu.o
>> obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
>> diff --git a/arch/x86/cpu/qemu/acpi_table.c b/arch/x86/cpu/qemu/acpi_table.c
>> index b17fa03..4584fc7 100644
>> --- a/arch/x86/cpu/qemu/acpi_table.c
>> +++ b/arch/x86/cpu/qemu/acpi_table.c
>> @@ -8,7 +8,9 @@
>> #include <command.h>
>> #include <errno.h>
>> #include <malloc.h>
>> +#ifdef CONFIG_QFW
>> #include <qemu_fw_cfg.h>
>> +#endif
>
> ditto.
>
>> #include <asm/io.h>
>> #include <asm/tables.h>
>> #include <asm/e820.h>
>> diff --git a/arch/x86/cpu/qemu/qemu.c b/arch/x86/cpu/qemu/qemu.c
>> index b41e4ec..2631e99 100644
>> --- a/arch/x86/cpu/qemu/qemu.c
>> +++ b/arch/x86/cpu/qemu/qemu.c
>> @@ -6,7 +6,9 @@
>>
>> #include <common.h>
>> #include <pci.h>
>> +#ifdef CONFIG_QFW
>> #include <qemu_fw_cfg.h>
>> +#endif
>
> ditto.
>
>> #include <asm/irq.h>
>> #include <asm/post.h>
>> #include <asm/processor.h>
>> @@ -88,7 +90,9 @@ static void qemu_chipset_init(void)
>> enable_pm_ich9();
>> }
>>
>> +#ifdef CONFIG_QFW
>> qemu_fwcfg_init();
>> +#endif
>> }
>>
>> int arch_cpu_init(void)
>> diff --git a/cmd/Kconfig b/cmd/Kconfig
>> index c0fffe3..08b761f 100644
>> --- a/cmd/Kconfig
>> +++ b/cmd/Kconfig
>> @@ -596,6 +596,7 @@ config CMD_SOUND
>> config CMD_QEMU_FW_CFG
>> bool "qfw"
>> depends on X86
>> + select QFW
>> help
>> This provides access to the QEMU firmware interface. The main
>> feature is to allow easy loading of files passed to qemu-system
>> diff --git a/cmd/Makefile b/cmd/Makefile
>> index f99e67d..31e4da7 100644
>> --- a/cmd/Makefile
>> +++ b/cmd/Makefile
>> @@ -105,7 +105,7 @@ endif
>> obj-y += pcmcia.o
>> obj-$(CONFIG_CMD_PORTIO) += portio.o
>> obj-$(CONFIG_CMD_PXE) += pxe.o
>> -obj-$(CONFIG_CMD_QEMU_FW_CFG) += qemu_fw_cfg.o
>> +obj-$(CONFIG_CMD_QEMU_FW_CFG) += cmd_qfw.o
>> obj-$(CONFIG_CMD_READ) += read.o
>> obj-$(CONFIG_CMD_REGINFO) += reginfo.o
>> obj-$(CONFIG_CMD_REISER) += reiser.o
>> diff --git a/cmd/cmd_qfw.c b/cmd/cmd_qfw.c
>> new file mode 100644
>> index 0000000..eefaf65
>> --- /dev/null
>> +++ b/cmd/cmd_qfw.c
>> @@ -0,0 +1,182 @@
>> +/*
>> + * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <command.h>
>> +#include <errno.h>
>> +#include <qemu_fw_cfg.h>
>> +
>> +/*
>> + * This function prepares kernel for zboot. It loads kernel data
>> + * to 'load_addr', initrd to 'initrd_addr' and kernel command
>> + * line using qemu fw_cfg interface.
>> + */
>> +static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
>> +{
>> + char *data_addr;
>> + uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
>> +
>> + qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
>> + qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
>> +
>> + if (setup_size == 0 || kernel_size == 0) {
>> + printf("warning: no kernel available\n");
>> + return -1;
>> + }
>> +
>> + data_addr = load_addr;
>> + qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
>> + le32_to_cpu(setup_size), data_addr);
>> + data_addr += le32_to_cpu(setup_size);
>> +
>> + qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
>> + le32_to_cpu(kernel_size), data_addr);
>> + data_addr += le32_to_cpu(kernel_size);
>> +
>> + data_addr = initrd_addr;
>> + qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
>> + if (initrd_size == 0) {
>> + printf("warning: no initrd available\n");
>> + } else {
>> + qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
>> + le32_to_cpu(initrd_size), data_addr);
>> + data_addr += le32_to_cpu(initrd_size);
>> + }
>> +
>> + qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
>> + if (cmdline_size) {
>> + qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
>> + le32_to_cpu(cmdline_size), data_addr);
>> + /*
>> + * if kernel cmdline only contains '\0', (e.g. no -append
>> + * when invoking qemu), do not update bootargs
>> + */
>> + if (*data_addr != '\0') {
>> + if (setenv("bootargs", data_addr) < 0)
>> + printf("warning: unable to change bootargs\n");
>> + }
>> + }
>> +
>> + printf("loading kernel to address %p size %x", load_addr,
>> + le32_to_cpu(kernel_size));
>> + if (initrd_size)
>> + printf(" initrd %p size %x\n",
>> + initrd_addr,
>> + le32_to_cpu(initrd_size));
>> + else
>> + printf("\n");
>> +
>> + return 0;
>> +}
>> +
>> +static int qemu_fwcfg_list_firmware(void)
>> +{
>> + int ret;
>> + struct fw_cfg_file_iter iter;
>> + struct fw_file *file;
>> +
>> + /* make sure fw_list is loaded */
>> + ret = qemu_fwcfg_read_firmware_list();
>> + if (ret)
>> + return ret;
>> +
>> +
>> + for (file = qemu_fwcfg_file_iter_init(&iter);
>> + !qemu_fwcfg_file_iter_end(&iter);
>> + file = qemu_fwcfg_file_iter_next(&iter)) {
>> + printf("%-56s\n", file->cfg.name);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
>> + int argc, char * const argv[])
>> +{
>> + if (qemu_fwcfg_list_firmware() < 0)
>> + return CMD_RET_FAILURE;
>> +
>> + return 0;
>> +}
>> +
>> +static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
>> + int argc, char * const argv[])
>> +{
>> + int ret = qemu_fwcfg_online_cpus();
>> + if (ret < 0) {
>> + printf("QEMU fw_cfg interface not found\n");
>> + return CMD_RET_FAILURE;
>> + }
>> +
>> + printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
>> +
>> + return 0;
>> +}
>> +
>> +static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
>> + int argc, char * const argv[])
>> +{
>> + char *env;
>> + void *load_addr;
>> + void *initrd_addr;
>> +
>> + env = getenv("loadaddr");
>> + load_addr = env ?
>> + (void *)simple_strtoul(env, NULL, 16) :
>> + (void *)CONFIG_LOADADDR;
>> +
>> + env = getenv("ramdiskaddr");
>> + initrd_addr = env ?
>> + (void *)simple_strtoul(env, NULL, 16) :
>> + (void *)CONFIG_RAMDISK_ADDR;
>> +
>> + if (argc == 2) {
>> + load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
>> + initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
>> + } else if (argc == 1) {
>> + load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
>> + }
>> +
>> + return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
>> +}
>> +
>> +static cmd_tbl_t fwcfg_commands[] = {
>> + U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
>> + U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
>> + U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
>> +};
>> +
>> +static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
>> +{
>> + int ret;
>> + cmd_tbl_t *fwcfg_cmd;
>> +
>> + if (!qemu_fwcfg_present()) {
>> + printf("QEMU fw_cfg interface not found\n");
>> + return CMD_RET_USAGE;
>> + }
>> +
>> + fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
>> + ARRAY_SIZE(fwcfg_commands));
>> + argc -= 2;
>> + argv += 2;
>> + if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
>> + return CMD_RET_USAGE;
>> +
>> + ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
>> +
>> + return cmd_process_error(fwcfg_cmd, ret);
>> +}
>> +
>> +U_BOOT_CMD(
>> + qfw, 4, 1, do_qemu_fw,
>> + "QEMU firmware interface",
>> + "<command>\n"
>> + " - list : print firmware(s) currently loaded\n"
>> + " - cpus : print online cpu number\n"
>> + " - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
>> +)
>> +
>> diff --git a/cmd/qemu_fw_cfg.c b/cmd/qemu_fw_cfg.c
>> deleted file mode 100644
>> index aab6b1a..0000000
>> --- a/cmd/qemu_fw_cfg.c
>> +++ /dev/null
>> @@ -1,353 +0,0 @@
>> -/*
>> - * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
>> - *
>> - * SPDX-License-Identifier: GPL-2.0+
>> - */
>> -
>> -#include <common.h>
>> -#include <command.h>
>> -#include <errno.h>
>> -#include <malloc.h>
>> -#include <qemu_fw_cfg.h>
>> -#include <asm/io.h>
>> -#include <linux/list.h>
>> -
>> -static bool fwcfg_present;
>> -static bool fwcfg_dma_present;
>> -
>> -static LIST_HEAD(fw_list);
>> -
>> -/* Read configuration item using fw_cfg PIO interface */
>> -static void qemu_fwcfg_read_entry_pio(uint16_t entry,
>> - uint32_t size, void *address)
>> -{
>> - uint32_t i = 0;
>> - uint8_t *data = address;
>> -
>> - /*
>> - * writting FW_CFG_INVALID will cause read operation to resume at
>> - * last offset, otherwise read will start at offset 0
>> - */
>> - if (entry != FW_CFG_INVALID)
>> - outw(entry, FW_CONTROL_PORT);
>> - while (size--)
>> - data[i++] = inb(FW_DATA_PORT);
>> -}
>> -
>> -/* Read configuration item using fw_cfg DMA interface */
>> -static void qemu_fwcfg_read_entry_dma(uint16_t entry,
>> - uint32_t size, void *address)
>> -{
>> - struct fw_cfg_dma_access dma;
>> -
>> - dma.length = cpu_to_be32(size);
>> - dma.address = cpu_to_be64((uintptr_t)address);
>> - dma.control = cpu_to_be32(FW_CFG_DMA_READ);
>> -
>> - /*
>> - * writting FW_CFG_INVALID will cause read operation to resume at
>> - * last offset, otherwise read will start at offset 0
>> - */
>> - if (entry != FW_CFG_INVALID)
>> - dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
>> -
>> - barrier();
>> -
>> - debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
>> - address, size, be32_to_cpu(dma.control));
>> -
>> - outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
>> -
>> - while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
>> - __asm__ __volatile__ ("pause");
>> -}
>> -
>> -bool qemu_fwcfg_present(void)
>> -{
>> - return fwcfg_present;
>> -}
>> -
>> -bool qemu_fwcfg_dma_present(void)
>> -{
>> - return fwcfg_dma_present;
>> -}
>> -
>> -void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
>> -{
>> - if (fwcfg_dma_present)
>> - qemu_fwcfg_read_entry_dma(entry, length, address);
>> - else
>> - qemu_fwcfg_read_entry_pio(entry, length, address);
>> -}
>> -
>> -int qemu_fwcfg_online_cpus(void)
>> -{
>> - uint16_t nb_cpus;
>> -
>> - if (!fwcfg_present)
>> - return -ENODEV;
>> -
>> - qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
>> -
>> - return le16_to_cpu(nb_cpus);
>> -}
>> -
>> -/*
>> - * This function prepares kernel for zboot. It loads kernel data
>> - * to 'load_addr', initrd to 'initrd_addr' and kernel command
>> - * line using qemu fw_cfg interface.
>> - */
>> -static int qemu_fwcfg_setup_kernel(void *load_addr, void *initrd_addr)
>> -{
>> - char *data_addr;
>> - uint32_t setup_size, kernel_size, cmdline_size, initrd_size;
>> -
>> - qemu_fwcfg_read_entry(FW_CFG_SETUP_SIZE, 4, &setup_size);
>> - qemu_fwcfg_read_entry(FW_CFG_KERNEL_SIZE, 4, &kernel_size);
>> -
>> - if (setup_size == 0 || kernel_size == 0) {
>> - printf("warning: no kernel available\n");
>> - return -1;
>> - }
>> -
>> - data_addr = load_addr;
>> - qemu_fwcfg_read_entry(FW_CFG_SETUP_DATA,
>> - le32_to_cpu(setup_size), data_addr);
>> - data_addr += le32_to_cpu(setup_size);
>> -
>> - qemu_fwcfg_read_entry(FW_CFG_KERNEL_DATA,
>> - le32_to_cpu(kernel_size), data_addr);
>> - data_addr += le32_to_cpu(kernel_size);
>> -
>> - data_addr = initrd_addr;
>> - qemu_fwcfg_read_entry(FW_CFG_INITRD_SIZE, 4, &initrd_size);
>> - if (initrd_size == 0) {
>> - printf("warning: no initrd available\n");
>> - } else {
>> - qemu_fwcfg_read_entry(FW_CFG_INITRD_DATA,
>> - le32_to_cpu(initrd_size), data_addr);
>> - data_addr += le32_to_cpu(initrd_size);
>> - }
>> -
>> - qemu_fwcfg_read_entry(FW_CFG_CMDLINE_SIZE, 4, &cmdline_size);
>> - if (cmdline_size) {
>> - qemu_fwcfg_read_entry(FW_CFG_CMDLINE_DATA,
>> - le32_to_cpu(cmdline_size), data_addr);
>> - /*
>> - * if kernel cmdline only contains '\0', (e.g. no -append
>> - * when invoking qemu), do not update bootargs
>> - */
>> - if (*data_addr != '\0') {
>> - if (setenv("bootargs", data_addr) < 0)
>> - printf("warning: unable to change bootargs\n");
>> - }
>> - }
>> -
>> - printf("loading kernel to address %p size %x", load_addr,
>> - le32_to_cpu(kernel_size));
>> - if (initrd_size)
>> - printf(" initrd %p size %x\n",
>> - initrd_addr,
>> - le32_to_cpu(initrd_size));
>> - else
>> - printf("\n");
>> -
>> - return 0;
>> -}
>> -
>> -int qemu_fwcfg_read_firmware_list(void)
>> -{
>> - int i;
>> - uint32_t count;
>> - struct fw_file *file;
>> - struct list_head *entry;
>> -
>> - /* don't read it twice */
>> - if (!list_empty(&fw_list))
>> - return 0;
>> -
>> - qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
>> - if (!count)
>> - return 0;
>> -
>> - count = be32_to_cpu(count);
>> - for (i = 0; i < count; i++) {
>> - file = malloc(sizeof(*file));
>> - if (!file) {
>> - printf("error: allocating resource\n");
>> - goto err;
>> - }
>> - qemu_fwcfg_read_entry(FW_CFG_INVALID,
>> - sizeof(struct fw_cfg_file), &file->cfg);
>> - file->addr = 0;
>> - list_add_tail(&file->list, &fw_list);
>> - }
>> -
>> - return 0;
>> -
>> -err:
>> - list_for_each(entry, &fw_list) {
>> - file = list_entry(entry, struct fw_file, list);
>> - free(file);
>> - }
>> -
>> - return -ENOMEM;
>> -}
>> -
>> -struct fw_file *qemu_fwcfg_find_file(const char *name)
>> -{
>> - struct list_head *entry;
>> - struct fw_file *file;
>> -
>> - list_for_each(entry, &fw_list) {
>> - file = list_entry(entry, struct fw_file, list);
>> - if (!strcmp(file->cfg.name, name))
>> - return file;
>> - }
>> -
>> - return NULL;
>> -}
>> -
>> -struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
>> -{
>> - iter->entry = fw_list.next;
>> - return list_entry(iter->entry, struct fw_file, list);
>> -}
>> -
>> -struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter)
>> -{
>> - iter->entry = iter->entry->next;
>> - return list_entry(iter->entry, struct fw_file, list);
>> -}
>> -
>> -bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
>> -{
>> - return iter->entry == &fw_list;
>> -}
>> -
>> -static int qemu_fwcfg_list_firmware(void)
>> -{
>> - int ret;
>> - struct fw_cfg_file_iter iter;
>> - struct fw_file *file;
>> -
>> - /* make sure fw_list is loaded */
>> - ret = qemu_fwcfg_read_firmware_list();
>> - if (ret)
>> - return ret;
>> -
>> -
>> - for (file = qemu_fwcfg_file_iter_init(&iter);
>> - !qemu_fwcfg_file_iter_end(&iter);
>> - file = qemu_fwcfg_file_iter_next(&iter)) {
>> - printf("%-56s\n", file->cfg.name);
>> - }
>> -
>> - return 0;
>> -}
>> -
>> -void qemu_fwcfg_init(void)
>> -{
>> - uint32_t qemu;
>> - uint32_t dma_enabled;
>> -
>> - fwcfg_present = false;
>> - fwcfg_dma_present = false;
>> -
>> - qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
>> - if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
>> - fwcfg_present = true;
>> -
>> - if (fwcfg_present) {
>> - qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
>> - if (dma_enabled & FW_CFG_DMA_ENABLED)
>> - fwcfg_dma_present = true;
>> - }
>> -}
>> -
>> -static int qemu_fwcfg_do_list(cmd_tbl_t *cmdtp, int flag,
>> - int argc, char * const argv[])
>> -{
>> - if (qemu_fwcfg_list_firmware() < 0)
>> - return CMD_RET_FAILURE;
>> -
>> - return 0;
>> -}
>> -
>> -static int qemu_fwcfg_do_cpus(cmd_tbl_t *cmdtp, int flag,
>> - int argc, char * const argv[])
>> -{
>> - int ret = qemu_fwcfg_online_cpus();
>> - if (ret < 0) {
>> - printf("QEMU fw_cfg interface not found\n");
>> - return CMD_RET_FAILURE;
>> - }
>> -
>> - printf("%d cpu(s) online\n", qemu_fwcfg_online_cpus());
>> -
>> - return 0;
>> -}
>> -
>> -static int qemu_fwcfg_do_load(cmd_tbl_t *cmdtp, int flag,
>> - int argc, char * const argv[])
>> -{
>> - char *env;
>> - void *load_addr;
>> - void *initrd_addr;
>> -
>> - env = getenv("loadaddr");
>> - load_addr = env ?
>> - (void *)simple_strtoul(env, NULL, 16) :
>> - (void *)CONFIG_LOADADDR;
>> -
>> - env = getenv("ramdiskaddr");
>> - initrd_addr = env ?
>> - (void *)simple_strtoul(env, NULL, 16) :
>> - (void *)CONFIG_RAMDISK_ADDR;
>> -
>> - if (argc == 2) {
>> - load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
>> - initrd_addr = (void *)simple_strtoul(argv[1], NULL, 16);
>> - } else if (argc == 1) {
>> - load_addr = (void *)simple_strtoul(argv[0], NULL, 16);
>> - }
>> -
>> - return qemu_fwcfg_setup_kernel(load_addr, initrd_addr);
>> -}
>> -
>> -static cmd_tbl_t fwcfg_commands[] = {
>> - U_BOOT_CMD_MKENT(list, 0, 1, qemu_fwcfg_do_list, "", ""),
>> - U_BOOT_CMD_MKENT(cpus, 0, 1, qemu_fwcfg_do_cpus, "", ""),
>> - U_BOOT_CMD_MKENT(load, 2, 1, qemu_fwcfg_do_load, "", ""),
>> -};
>> -
>> -static int do_qemu_fw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
>> -{
>> - int ret;
>> - cmd_tbl_t *fwcfg_cmd;
>> -
>> - if (!qemu_fwcfg_present()) {
>> - printf("QEMU fw_cfg interface not found\n");
>> - return CMD_RET_USAGE;
>> - }
>> -
>> - fwcfg_cmd = find_cmd_tbl(argv[1], fwcfg_commands,
>> - ARRAY_SIZE(fwcfg_commands));
>> - argc -= 2;
>> - argv += 2;
>> - if (!fwcfg_cmd || argc > fwcfg_cmd->maxargs)
>> - return CMD_RET_USAGE;
>> -
>> - ret = fwcfg_cmd->cmd(fwcfg_cmd, flag, argc, argv);
>> -
>> - return cmd_process_error(fwcfg_cmd, ret);
>> -}
>> -
>> -U_BOOT_CMD(
>> - qfw, 4, 1, do_qemu_fw,
>> - "QEMU firmware interface",
>> - "<command>\n"
>> - " - list : print firmware(s) currently loaded\n"
>> - " - cpus : print online cpu number\n"
>> - " - load <kernel addr> <initrd addr> : load kernel and initrd (if any), and setup for zboot\n"
>> -)
>> diff --git a/common/Kconfig b/common/Kconfig
>> index 067545d..8ca5a68 100644
>> --- a/common/Kconfig
>> +++ b/common/Kconfig
>> @@ -124,3 +124,4 @@ config CONSOLE_RECORD_IN_SIZE
>> tstc() and getc() will use this in preference to real device input.
>> The buffer is allocated immediately after the malloc() region is
>> ready.
>> +
>
> What is this for?
>
>> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
>> index af8667f..fa53700 100644
>> --- a/drivers/misc/Kconfig
>> +++ b/drivers/misc/Kconfig
>> @@ -138,4 +138,10 @@ config WINBOND_W83627
>> legacy UART or other devices in the Winbond Super IO chips
>> on X86 platforms.
>>
>> +config QFW
>> + bool
>> + help
>> + Hidden option to enable QEMU fw_cfg interface. This will be selected by
>> + either CONFIG_CMD_QEMU_FW_CFG or CONFIG_GENERATE_ACPI_TABLE.
>> +
>> endmenu
>> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
>> index 5969d34..4893086 100644
>> --- a/drivers/misc/Makefile
>> +++ b/drivers/misc/Makefile
>> @@ -43,3 +43,4 @@ obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
>> obj-$(CONFIG_RESET) += reset-uclass.o
>> obj-$(CONFIG_FSL_DEVICE_DISABLE) += fsl_devdis.o
>> obj-$(CONFIG_WINBOND_W83627) += winbond_w83627.o
>> +obj-$(CONFIG_QFW) += qemu_fw_cfg.o
>> diff --git a/drivers/misc/qemu_fw_cfg.c b/drivers/misc/qemu_fw_cfg.c
>> new file mode 100644
>> index 0000000..e726059
>> --- /dev/null
>> +++ b/drivers/misc/qemu_fw_cfg.c
>> @@ -0,0 +1,185 @@
>> +/*
>> + * (C) Copyright 2015 Miao Yan <yanmiaobest@gmail.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <command.h>
>> +#include <errno.h>
>> +#include <malloc.h>
>> +#include <qemu_fw_cfg.h>
>> +#include <asm/io.h>
>> +#include <linux/list.h>
>> +
>> +static bool fwcfg_present;
>> +static bool fwcfg_dma_present;
>> +
>> +static LIST_HEAD(fw_list);
>> +
>> +/* Read configuration item using fw_cfg PIO interface */
>> +static void qemu_fwcfg_read_entry_pio(uint16_t entry,
>> + uint32_t size, void *address)
>> +{
>> + uint32_t i = 0;
>> + uint8_t *data = address;
>> +
>> + /*
>> + * writting FW_CFG_INVALID will cause read operation to resume at
>> + * last offset, otherwise read will start at offset 0
>> + */
>> + if (entry != FW_CFG_INVALID)
>> + outw(entry, FW_CONTROL_PORT);
>> + while (size--)
>> + data[i++] = inb(FW_DATA_PORT);
>> +}
>> +
>> +/* Read configuration item using fw_cfg DMA interface */
>> +static void qemu_fwcfg_read_entry_dma(uint16_t entry,
>> + uint32_t size, void *address)
>> +{
>> + struct fw_cfg_dma_access dma;
>> +
>> + dma.length = cpu_to_be32(size);
>> + dma.address = cpu_to_be64((uintptr_t)address);
>> + dma.control = cpu_to_be32(FW_CFG_DMA_READ);
>> +
>> + /*
>> + * writting FW_CFG_INVALID will cause read operation to resume at
>> + * last offset, otherwise read will start at offset 0
>> + */
>> + if (entry != FW_CFG_INVALID)
>> + dma.control |= cpu_to_be32(FW_CFG_DMA_SELECT | (entry << 16));
>> +
>> + barrier();
>> +
>> + debug("qemu_fwcfg_dma_read_entry: addr %p, length %u control 0x%x\n",
>> + address, size, be32_to_cpu(dma.control));
>> +
>> + outl(cpu_to_be32((uint32_t)&dma), FW_DMA_PORT_HIGH);
>> +
>> + while (be32_to_cpu(dma.control) & ~FW_CFG_DMA_ERROR)
>> + __asm__ __volatile__ ("pause");
>> +}
>> +
>> +bool qemu_fwcfg_present(void)
>> +{
>> + return fwcfg_present;
>> +}
>> +
>> +bool qemu_fwcfg_dma_present(void)
>> +{
>> + return fwcfg_dma_present;
>> +}
>> +
>> +void qemu_fwcfg_read_entry(uint16_t entry, uint32_t length, void *address)
>> +{
>> + if (fwcfg_dma_present)
>> + qemu_fwcfg_read_entry_dma(entry, length, address);
>> + else
>> + qemu_fwcfg_read_entry_pio(entry, length, address);
>> +}
>> +
>> +int qemu_fwcfg_online_cpus(void)
>> +{
>> + uint16_t nb_cpus;
>> +
>> + if (!fwcfg_present)
>> + return -ENODEV;
>> +
>> + qemu_fwcfg_read_entry(FW_CFG_NB_CPUS, 2, &nb_cpus);
>> +
>> + return le16_to_cpu(nb_cpus);
>> +}
>> +
>> +int qemu_fwcfg_read_firmware_list(void)
>> +{
>> + int i;
>> + uint32_t count;
>> + struct fw_file *file;
>> + struct list_head *entry;
>> +
>> + /* don't read it twice */
>> + if (!list_empty(&fw_list))
>> + return 0;
>> +
>> + qemu_fwcfg_read_entry(FW_CFG_FILE_DIR, 4, &count);
>> + if (!count)
>> + return 0;
>> +
>> + count = be32_to_cpu(count);
>> + for (i = 0; i < count; i++) {
>> + file = malloc(sizeof(*file));
>> + if (!file) {
>> + printf("error: allocating resource\n");
>> + goto err;
>> + }
>> + qemu_fwcfg_read_entry(FW_CFG_INVALID,
>> + sizeof(struct fw_cfg_file), &file->cfg);
>> + file->addr = 0;
>> + list_add_tail(&file->list, &fw_list);
>> + }
>> +
>> + return 0;
>> +
>> +err:
>> + list_for_each(entry, &fw_list) {
>> + file = list_entry(entry, struct fw_file, list);
>> + free(file);
>> + }
>> +
>> + return -ENOMEM;
>> +}
>> +
>> +struct fw_file *qemu_fwcfg_find_file(const char *name)
>> +{
>> + struct list_head *entry;
>> + struct fw_file *file;
>> +
>> + list_for_each(entry, &fw_list) {
>> + file = list_entry(entry, struct fw_file, list);
>> + if (!strcmp(file->cfg.name, name))
>> + return file;
>> + }
>> +
>> + return NULL;
>> +}
>> +
>> +struct fw_file *qemu_fwcfg_file_iter_init(struct fw_cfg_file_iter *iter)
>> +{
>> + iter->entry = fw_list.next;
>> + return list_entry((struct list_head *)iter->entry,
>> + struct fw_file, list);
>> +}
>> +
>> +struct fw_file *qemu_fwcfg_file_iter_next(struct fw_cfg_file_iter *iter)
>> +{
>> + iter->entry = ((struct list_head *)iter->entry)->next;
>> + return list_entry((struct list_head *)iter->entry,
>> + struct fw_file, list);
>> +}
>> +
>> +bool qemu_fwcfg_file_iter_end(struct fw_cfg_file_iter *iter)
>> +{
>> + return iter->entry == &fw_list;
>> +}
>> +
>> +void qemu_fwcfg_init(void)
>> +{
>> + uint32_t qemu;
>> + uint32_t dma_enabled;
>> +
>> + fwcfg_present = false;
>> + fwcfg_dma_present = false;
>> +
>> + qemu_fwcfg_read_entry_pio(FW_CFG_SIGNATURE, 4, &qemu);
>> + if (be32_to_cpu(qemu) == QEMU_FW_CFG_SIGNATURE)
>> + fwcfg_present = true;
>> +
>> + if (fwcfg_present) {
>> + qemu_fwcfg_read_entry_pio(FW_CFG_ID, 1, &dma_enabled);
>> + if (dma_enabled & FW_CFG_DMA_ENABLED)
>> + fwcfg_dma_present = true;
>> + }
>> +}
>> +
>> --
>
> When applying this patch, I got:
>
> $ git am U-Boot-05-12-x86-qemu-split-qfw-command-interface-and-qfw-core.patch
> Applying: x86: qemu: split qfw command interface and qfw core
> /git/u-boot/.git/rebase-apply/patch:327: new blank line at EOF.
> +
> /git/u-boot/.git/rebase-apply/patch:695: new blank line at EOF.
> +
> /git/u-boot/.git/rebase-apply/patch:910: new blank line at EOF.
> +
> warning: 3 lines add whitespace errors.
>
> Can you please fix these?
Sure.
Thanks,
Miao
>
> Regards,
> Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 12/12] x86: qemu: rename qemu/acpi_table.c
2016-05-13 14:01 ` Bin Meng
@ 2016-05-16 9:40 ` Miao Yan
2016-05-17 0:42 ` Tom Rini
0 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-16 9:40 UTC (permalink / raw)
To: u-boot
Hi Bin,
2016-05-13 22:01 GMT+08:00 Bin Meng <bmeng.cn@gmail.com>:
> Hi Miao,
>
> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
>> Rename qemu/acpi_table.c to qemu/e820.c, because ACPI stuff is moved
>> to qfw core, this file only contains code for installing e820 table.
>>
>> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
>> ---
>> arch/x86/cpu/qemu/Makefile | 3 +--
>> arch/x86/cpu/qemu/acpi_table.c | 43 ------------------------------------------
>> arch/x86/cpu/qemu/e820.c | 43 ++++++++++++++++++++++++++++++++++++++++++
>
> Please use "git mv".
I did use "git mv". I'll double check.
Miao
>
>> 3 files changed, 44 insertions(+), 45 deletions(-)
>> delete mode 100644 arch/x86/cpu/qemu/acpi_table.c
>> create mode 100644 arch/x86/cpu/qemu/e820.c
>>
>
> Regards,
> Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 10/12] cmd: qfw: do not depend on x86
2016-05-13 14:00 ` Bin Meng
@ 2016-05-16 9:44 ` Miao Yan
2016-05-16 13:33 ` Bin Meng
0 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-16 9:44 UTC (permalink / raw)
To: u-boot
Hi Bin,
2016-05-13 22:00 GMT+08:00 Bin Meng <bmeng.cn@gmail.com>:
> Hi Miao,
>
> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
>> The qfw command interface used to depend on X86, this patch removes
>> this restriction so it can be built for sandbox for testing. For normal
>> usage, it can only be used with CONFIG_QEMU.
>>
>> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
>> ---
>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
>
> Would you prepare a patch to enable this on Sandbox?
I'll give it a try. Do you prefer to do that in this patch-set or submit later ?
Miao
>
>> cmd/Kconfig | 1 -
>> 1 file changed, 1 deletion(-)
>>
>> diff --git a/cmd/Kconfig b/cmd/Kconfig
>> index 08b761f..01870cb 100644
>> --- a/cmd/Kconfig
>> +++ b/cmd/Kconfig
>> @@ -595,7 +595,6 @@ config CMD_SOUND
>>
>> config CMD_QEMU_FW_CFG
>> bool "qfw"
>> - depends on X86
>> select QFW
>> help
>> This provides access to the QEMU firmware interface. The main
>> --
>
> Regards,
> Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 09/12] cmd: qfw: workaround qfw build issue
2016-05-13 20:46 ` Tom Rini
@ 2016-05-16 9:44 ` Miao Yan
0 siblings, 0 replies; 40+ messages in thread
From: Miao Yan @ 2016-05-16 9:44 UTC (permalink / raw)
To: u-boot
2016-05-14 4:46 GMT+08:00 Tom Rini <trini@konsulko.com>:
> On Fri, May 13, 2016 at 10:00:37PM +0800, Bin Meng wrote:
>> Hi Miao,
>>
>> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
>> > The qfw command interface makes use of CONFIG_LOADADDR and
>> > CONFIG_RAMDISKADDR to setup kernel. But not all boards have these macro,
>> > which causes build problem on those platforms.
>> >
>> > This patch fixes this issue.
>> >
>> > Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
>>
>> Looks good.
>>
>> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
>>
>> But the commit title "workaround" looks to be a workaround, which does
>> not sound that good.
>
> Yes, maybe just say that it's no longer requiring default values?
OK. Will fix.
Thanks,
Miao
>
> --
> Tom
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 03/12] cmd: qfw: remove qemu_fwcfg_free_files()
2016-05-13 20:46 ` Tom Rini
@ 2016-05-16 9:47 ` Miao Yan
2016-05-17 0:42 ` Tom Rini
0 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-16 9:47 UTC (permalink / raw)
To: u-boot
2016-05-14 4:46 GMT+08:00 Tom Rini <trini@konsulko.com>:
> On Fri, May 13, 2016 at 10:00:05PM +0800, Bin Meng wrote:
>> Hi Miao,
>>
>> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
>> > This patch is part of the qfw refactor work.
>> >
>> > The qemu_fwcfg_free_files() function is only used in error handling in
>> > ACPI table generation, let's not make this a core function and move it
>> > to the right place.
>> >
>>
>> But I suspect this API may still be needed in some other scenarioes?
>> eg: for future ARM64 ACPI?
>
> Yes, as it stands currently the code looks likely useful for non-x86
> QEMU+ACPI.
ARM64 and x86 should be able to share common ACPI code. As for now,
this function is not used anywhere but error handling in only one
place. I'd prefer not to make this public.
Thanks,
Miao
>
> --
> Tom
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core
2016-05-16 8:47 ` Bin Meng
@ 2016-05-16 9:50 ` Miao Yan
2016-05-16 13:32 ` Bin Meng
0 siblings, 1 reply; 40+ messages in thread
From: Miao Yan @ 2016-05-16 9:50 UTC (permalink / raw)
To: u-boot
Hi Bin,
2016-05-16 16:47 GMT+08:00 Bin Meng <bmeng.cn@gmail.com>:
> Hi Miao,
>
> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
>> This patch splits qfw command interface and qfw core function into two
>> files, and introduces a new Kconfig option (CONFIG_QFW). for
>> qfw core.
>>
>> Now when qfw command interface is enabled, it will automatically select
>> qfw core. This patch also makes the ACPI table generation select
>> CONFIG_QFW.
>>
>> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
>> ---
>> arch/x86/Kconfig | 2 +-
>> arch/x86/cpu/mp_init.c | 6 +-
>> arch/x86/cpu/qemu/Makefile | 3 +-
>> arch/x86/cpu/qemu/acpi_table.c | 2 +
>> arch/x86/cpu/qemu/qemu.c | 4 +
>> cmd/Kconfig | 1 +
>> cmd/Makefile | 2 +-
>> cmd/cmd_qfw.c | 182 +++++++++++++++++++++
>
> The file name should be qfw.c without cmd_
>
>> cmd/qemu_fw_cfg.c | 353 -----------------------------------------
>
> And I suspect you can also use "git mv" for cmd/qemu_fw_cfg.c. "git mv
> cmd/qemu_fw_cfg.c cmd/qfw.c"
But there is already a qfw.c under driver/misc/, having two files
using the same name seems a bit confusing.
Thanks,
Miao
>
>> common/Kconfig | 1 +
>> drivers/misc/Kconfig | 6 +
>> drivers/misc/Makefile | 1 +
>> drivers/misc/qemu_fw_cfg.c | 185 +++++++++++++++++++++
>> 13 files changed, 390 insertions(+), 358 deletions(-)
>> create mode 100644 cmd/cmd_qfw.c
>> delete mode 100644 cmd/qemu_fw_cfg.c
>> create mode 100644 drivers/misc/qemu_fw_cfg.c
>>
>
> Regards,
> Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core
2016-05-16 9:50 ` Miao Yan
@ 2016-05-16 13:32 ` Bin Meng
0 siblings, 0 replies; 40+ messages in thread
From: Bin Meng @ 2016-05-16 13:32 UTC (permalink / raw)
To: u-boot
Hi Miao,
On Mon, May 16, 2016 at 5:50 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> Hi Bin,
>
> 2016-05-16 16:47 GMT+08:00 Bin Meng <bmeng.cn@gmail.com>:
>> Hi Miao,
>>
>> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
>>> This patch splits qfw command interface and qfw core function into two
>>> files, and introduces a new Kconfig option (CONFIG_QFW). for
>>> qfw core.
>>>
>>> Now when qfw command interface is enabled, it will automatically select
>>> qfw core. This patch also makes the ACPI table generation select
>>> CONFIG_QFW.
>>>
>>> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
>>> ---
>>> arch/x86/Kconfig | 2 +-
>>> arch/x86/cpu/mp_init.c | 6 +-
>>> arch/x86/cpu/qemu/Makefile | 3 +-
>>> arch/x86/cpu/qemu/acpi_table.c | 2 +
>>> arch/x86/cpu/qemu/qemu.c | 4 +
>>> cmd/Kconfig | 1 +
>>> cmd/Makefile | 2 +-
>>> cmd/cmd_qfw.c | 182 +++++++++++++++++++++
>>
>> The file name should be qfw.c without cmd_
>>
>>> cmd/qemu_fw_cfg.c | 353 -----------------------------------------
>>
>> And I suspect you can also use "git mv" for cmd/qemu_fw_cfg.c. "git mv
>> cmd/qemu_fw_cfg.c cmd/qfw.c"
>
> But there is already a qfw.c under driver/misc/, having two files
> using the same name seems a bit confusing.
>
No problem because they are in different directory, and the command
one is in a directory named 'cmd'.
Regards,
Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 10/12] cmd: qfw: do not depend on x86
2016-05-16 9:44 ` Miao Yan
@ 2016-05-16 13:33 ` Bin Meng
0 siblings, 0 replies; 40+ messages in thread
From: Bin Meng @ 2016-05-16 13:33 UTC (permalink / raw)
To: u-boot
Hi Miao,
On Mon, May 16, 2016 at 5:44 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> Hi Bin,
>
> 2016-05-13 22:00 GMT+08:00 Bin Meng <bmeng.cn@gmail.com>:
>> Hi Miao,
>>
>> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
>>> The qfw command interface used to depend on X86, this patch removes
>>> this restriction so it can be built for sandbox for testing. For normal
>>> usage, it can only be used with CONFIG_QEMU.
>>>
>>> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
>>> ---
>>
>> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
>>
>> Would you prepare a patch to enable this on Sandbox?
>
> I'll give it a try. Do you prefer to do that in this patch-set or submit later ?
>
Please do in this patch-set so that we can test the sandbox build with
this qfw command.
Regards,
Bin
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 12/12] x86: qemu: rename qemu/acpi_table.c
2016-05-16 9:40 ` Miao Yan
@ 2016-05-17 0:42 ` Tom Rini
2016-05-17 1:23 ` Miao Yan
0 siblings, 1 reply; 40+ messages in thread
From: Tom Rini @ 2016-05-17 0:42 UTC (permalink / raw)
To: u-boot
On Mon, May 16, 2016 at 05:40:16PM +0800, Miao Yan wrote:
> Hi Bin,
>
> 2016-05-13 22:01 GMT+08:00 Bin Meng <bmeng.cn@gmail.com>:
> > Hi Miao,
> >
> > On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> >> Rename qemu/acpi_table.c to qemu/e820.c, because ACPI stuff is moved
> >> to qfw core, this file only contains code for installing e820 table.
> >>
> >> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
> >> ---
> >> arch/x86/cpu/qemu/Makefile | 3 +--
> >> arch/x86/cpu/qemu/acpi_table.c | 43 ------------------------------------------
> >> arch/x86/cpu/qemu/e820.c | 43 ++++++++++++++++++++++++++++++++++++++++++
> >
> > Please use "git mv".
>
> I did use "git mv". I'll double check.
I believe you need to tell git to work harder to detect renames. You'll
have to do git format-patch --find-copies-harder ... and git send-email
... rather than just using send-email by itself (or, there's a knob
somewhere I've missed that lets you tweak the rename threshold via the
config file).
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160516/aa363d8f/attachment.sig>
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 03/12] cmd: qfw: remove qemu_fwcfg_free_files()
2016-05-16 9:47 ` Miao Yan
@ 2016-05-17 0:42 ` Tom Rini
0 siblings, 0 replies; 40+ messages in thread
From: Tom Rini @ 2016-05-17 0:42 UTC (permalink / raw)
To: u-boot
On Mon, May 16, 2016 at 05:47:43PM +0800, Miao Yan wrote:
> 2016-05-14 4:46 GMT+08:00 Tom Rini <trini@konsulko.com>:
> > On Fri, May 13, 2016 at 10:00:05PM +0800, Bin Meng wrote:
> >> Hi Miao,
> >>
> >> On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
> >> > This patch is part of the qfw refactor work.
> >> >
> >> > The qemu_fwcfg_free_files() function is only used in error handling in
> >> > ACPI table generation, let's not make this a core function and move it
> >> > to the right place.
> >> >
> >>
> >> But I suspect this API may still be needed in some other scenarioes?
> >> eg: for future ARM64 ACPI?
> >
> > Yes, as it stands currently the code looks likely useful for non-x86
> > QEMU+ACPI.
>
> ARM64 and x86 should be able to share common ACPI code. As for now,
> this function is not used anywhere but error handling in only one
> place. I'd prefer not to make this public.
Well, OK, I'm not going to argue too too hard here, but if someone
duplicates this part of the qemu code since it wasn't in common, it's on
you :)
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160516/391bd7ff/attachment.sig>
^ permalink raw reply [flat|nested] 40+ messages in thread
* [U-Boot] [PATCH 12/12] x86: qemu: rename qemu/acpi_table.c
2016-05-17 0:42 ` Tom Rini
@ 2016-05-17 1:23 ` Miao Yan
0 siblings, 0 replies; 40+ messages in thread
From: Miao Yan @ 2016-05-17 1:23 UTC (permalink / raw)
To: u-boot
2016-05-17 8:42 GMT+08:00 Tom Rini <trini@konsulko.com>:
> On Mon, May 16, 2016 at 05:40:16PM +0800, Miao Yan wrote:
>> Hi Bin,
>>
>> 2016-05-13 22:01 GMT+08:00 Bin Meng <bmeng.cn@gmail.com>:
>> > Hi Miao,
>> >
>> > On Fri, May 13, 2016 at 2:29 PM, Miao Yan <yanmiaobest@gmail.com> wrote:
>> >> Rename qemu/acpi_table.c to qemu/e820.c, because ACPI stuff is moved
>> >> to qfw core, this file only contains code for installing e820 table.
>> >>
>> >> Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
>> >> ---
>> >> arch/x86/cpu/qemu/Makefile | 3 +--
>> >> arch/x86/cpu/qemu/acpi_table.c | 43 ------------------------------------------
>> >> arch/x86/cpu/qemu/e820.c | 43 ++++++++++++++++++++++++++++++++++++++++++
>> >
>> > Please use "git mv".
>>
>> I did use "git mv". I'll double check.
>
> I believe you need to tell git to work harder to detect renames. You'll
> have to do git format-patch --find-copies-harder ... and git send-email
> ... rather than just using send-email by itself (or, there's a knob
> somewhere I've missed that lets you tweak the rename threshold via the
> config file).
Thanks Tom, I'll try that.
Miao
>
> --
> Tom
^ permalink raw reply [flat|nested] 40+ messages in thread
end of thread, other threads:[~2016-05-17 1:23 UTC | newest]
Thread overview: 40+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-13 6:29 [U-Boot] [PATCH 00/12] cleanup QEMU fw_cfg code Miao Yan
2016-05-13 6:29 ` [U-Boot] [PATCH 01/12] x86: qemu: fix ACPI Kconfig options Miao Yan
2016-05-13 13:59 ` Bin Meng
2016-05-16 9:37 ` Miao Yan
2016-05-13 6:29 ` [U-Boot] [PATCH 02/12] cmd: qfw: add API to iterate firmware list Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 03/12] cmd: qfw: remove qemu_fwcfg_free_files() Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 20:46 ` Tom Rini
2016-05-16 9:47 ` Miao Yan
2016-05-17 0:42 ` Tom Rini
2016-05-13 6:29 ` [U-Boot] [PATCH 04/12] cmd: qfw: make fwcfg_present and fwcfg_dma_present public Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 05/12] x86: qemu: split qfw command interface and qfw core Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-16 9:39 ` Miao Yan
2016-05-16 8:47 ` Bin Meng
2016-05-16 9:50 ` Miao Yan
2016-05-16 13:32 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 06/12] x86: qemu: move x86 specific operations out of " Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 07/12] x86: qemu: add comment about qfw register endianness Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 08/12] cmd: qfw: rename qemu_fw_cfg.[c|h] to qfw.[c|h] Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 09/12] cmd: qfw: workaround qfw build issue Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-13 20:46 ` Tom Rini
2016-05-16 9:44 ` Miao Yan
2016-05-13 6:29 ` [U-Boot] [PATCH 10/12] cmd: qfw: do not depend on x86 Miao Yan
2016-05-13 14:00 ` Bin Meng
2016-05-16 9:44 ` Miao Yan
2016-05-16 13:33 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 11/12] cmd: qfw: bring ACPI generation code into qfw core Miao Yan
2016-05-13 14:01 ` Bin Meng
2016-05-13 6:29 ` [U-Boot] [PATCH 12/12] x86: qemu: rename qemu/acpi_table.c Miao Yan
2016-05-13 14:01 ` Bin Meng
2016-05-16 9:40 ` Miao Yan
2016-05-17 0:42 ` Tom Rini
2016-05-17 1:23 ` Miao Yan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.