[PATCH] arm(64)/kvm: improve the documentation about HVC calls

[PATCH] arm(64)/kvm: improve the documentation about HVC calls

[Pingfan Liu]

Both arm and arm64 kernel entry point have the following prerequisite:
  MMU = off, D-cache = off, I-cache = dont care.

HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
new kernel.

Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
off, and KVM resets them when its unload. These are achieved by
HVC_RESET_VECTORS call.

Improve the document.

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: James Morse <james.morse@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-doc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
To: kvmarm@lists.cs.columbia.edu
---
 Documentation/virt/kvm/arm/hyp-abi.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
index d9eba93..a95bc30 100644
--- a/Documentation/virt/kvm/arm/hyp-abi.rst
+++ b/Documentation/virt/kvm/arm/hyp-abi.rst
@@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
 
 * ::
 
-    r0/x0 = HVC_RESET_VECTORS
+    x0 = HVC_RESET_VECTORS (arm64 only)
 
-  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
+  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
   stubs' exception vector value. This effectively disables an existing
   hypervisor.
 
@@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
     x3 = x1's value when entering the next payload (arm64)
     x4 = x2's value when entering the next payload (arm64)
 
-  Mask all exceptions, disable the MMU, move the arguments into place
+  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
   (arm64 only), and jump to the restart address while at HYP/EL2. This
   hypercall is not expected to return to its caller.
 
-- 
2.7.5

[PATCH] arm(64)/kvm: improve the documentation about HVC calls

[Pingfan Liu]

Both arm and arm64 kernel entry point have the following prerequisite:
  MMU = off, D-cache = off, I-cache = dont care.

HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
new kernel.

Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
off, and KVM resets them when its unload. These are achieved by
HVC_RESET_VECTORS call.

Improve the document.

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: James Morse <james.morse@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-doc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
To: kvmarm@lists.cs.columbia.edu
---
 Documentation/virt/kvm/arm/hyp-abi.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
index d9eba93..a95bc30 100644
--- a/Documentation/virt/kvm/arm/hyp-abi.rst
+++ b/Documentation/virt/kvm/arm/hyp-abi.rst
@@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
 
 * ::
 
-    r0/x0 = HVC_RESET_VECTORS
+    x0 = HVC_RESET_VECTORS (arm64 only)
 
-  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
+  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
   stubs' exception vector value. This effectively disables an existing
   hypervisor.
 
@@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
     x3 = x1's value when entering the next payload (arm64)
     x4 = x2's value when entering the next payload (arm64)
 
-  Mask all exceptions, disable the MMU, move the arguments into place
+  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
   (arm64 only), and jump to the restart address while at HYP/EL2. This
   hypercall is not expected to return to its caller.
 
-- 
2.7.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH] arm(64)/kvm: improve the documentation about HVC calls

[Pingfan Liu]

Both arm and arm64 kernel entry point have the following prerequisite:
  MMU = off, D-cache = off, I-cache = dont care.

HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
new kernel.

Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
off, and KVM resets them when its unload. These are achieved by
HVC_RESET_VECTORS call.

Improve the document.

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: James Morse <james.morse@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-doc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
To: kvmarm@lists.cs.columbia.edu
---
 Documentation/virt/kvm/arm/hyp-abi.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
index d9eba93..a95bc30 100644
--- a/Documentation/virt/kvm/arm/hyp-abi.rst
+++ b/Documentation/virt/kvm/arm/hyp-abi.rst
@@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
 
 * ::
 
-    r0/x0 = HVC_RESET_VECTORS
+    x0 = HVC_RESET_VECTORS (arm64 only)
 
-  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
+  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
   stubs' exception vector value. This effectively disables an existing
   hypervisor.
 
@@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
     x3 = x1's value when entering the next payload (arm64)
     x4 = x2's value when entering the next payload (arm64)
 
-  Mask all exceptions, disable the MMU, move the arguments into place
+  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
   (arm64 only), and jump to the restart address while at HYP/EL2. This
   hypercall is not expected to return to its caller.
 
-- 
2.7.5

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

Re: [PATCH] arm(64)/kvm: improve the documentation about HVC calls

[Pingfan Liu]

This issue is detected by Morse
(https://lore.kernel.org/linux-arm-kernel/9b0da257-785b-90ba-de3c-b9ee9ccdeeba@arm.com/)
during the discussion for my patch.

I am not quite sure about the arm, but based on the note at the head
of arm/kernel/head.S, things should go that way. If any mistake,
please correct me.

Thanks,
Pingfan

On Wed, Aug 12, 2020 at 10:05 PM Pingfan Liu <kernelfans@gmail.com> wrote:
>
> Both arm and arm64 kernel entry point have the following prerequisite:
>   MMU = off, D-cache = off, I-cache = dont care.
>
> HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
> new kernel.
>
> Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
> off, and KVM resets them when its unload. These are achieved by
> HVC_RESET_VECTORS call.
>
> Improve the document.
>
> Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
> Cc: James Morse <james.morse@arm.com>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: linux-doc@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> To: kvmarm@lists.cs.columbia.edu
> ---
>  Documentation/virt/kvm/arm/hyp-abi.rst | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
> index d9eba93..a95bc30 100644
> --- a/Documentation/virt/kvm/arm/hyp-abi.rst
> +++ b/Documentation/virt/kvm/arm/hyp-abi.rst
> @@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>
>  * ::
>
> -    r0/x0 = HVC_RESET_VECTORS
> +    x0 = HVC_RESET_VECTORS (arm64 only)
>
> -  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
> +  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
>    stubs' exception vector value. This effectively disables an existing
>    hypervisor.
>
> @@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>      x3 = x1's value when entering the next payload (arm64)
>      x4 = x2's value when entering the next payload (arm64)
>
> -  Mask all exceptions, disable the MMU, move the arguments into place
> +  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
>    (arm64 only), and jump to the restart address while at HYP/EL2. This
>    hypercall is not expected to return to its caller.
>
> --
> 2.7.5
>

Re: [PATCH] arm(64)/kvm: improve the documentation about HVC calls

[Pingfan Liu]

This issue is detected by Morse
(https://lore.kernel.org/linux-arm-kernel/9b0da257-785b-90ba-de3c-b9ee9ccdeeba@arm.com/)
during the discussion for my patch.

I am not quite sure about the arm, but based on the note at the head
of arm/kernel/head.S, things should go that way. If any mistake,
please correct me.

Thanks,
Pingfan

On Wed, Aug 12, 2020 at 10:05 PM Pingfan Liu <kernelfans@gmail.com> wrote:
>
> Both arm and arm64 kernel entry point have the following prerequisite:
>   MMU = off, D-cache = off, I-cache = dont care.
>
> HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
> new kernel.
>
> Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
> off, and KVM resets them when its unload. These are achieved by
> HVC_RESET_VECTORS call.
>
> Improve the document.
>
> Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
> Cc: James Morse <james.morse@arm.com>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: linux-doc@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> To: kvmarm@lists.cs.columbia.edu
> ---
>  Documentation/virt/kvm/arm/hyp-abi.rst | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
> index d9eba93..a95bc30 100644
> --- a/Documentation/virt/kvm/arm/hyp-abi.rst
> +++ b/Documentation/virt/kvm/arm/hyp-abi.rst
> @@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>
>  * ::
>
> -    r0/x0 = HVC_RESET_VECTORS
> +    x0 = HVC_RESET_VECTORS (arm64 only)
>
> -  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
> +  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
>    stubs' exception vector value. This effectively disables an existing
>    hypervisor.
>
> @@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>      x3 = x1's value when entering the next payload (arm64)
>      x4 = x2's value when entering the next payload (arm64)
>
> -  Mask all exceptions, disable the MMU, move the arguments into place
> +  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
>    (arm64 only), and jump to the restart address while at HYP/EL2. This
>    hypercall is not expected to return to its caller.
>
> --
> 2.7.5
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] arm(64)/kvm: improve the documentation about HVC calls

[Pingfan Liu]

This issue is detected by Morse
(https://lore.kernel.org/linux-arm-kernel/9b0da257-785b-90ba-de3c-b9ee9ccdeeba@arm.com/)
during the discussion for my patch.

I am not quite sure about the arm, but based on the note at the head
of arm/kernel/head.S, things should go that way. If any mistake,
please correct me.

Thanks,
Pingfan

On Wed, Aug 12, 2020 at 10:05 PM Pingfan Liu <kernelfans@gmail.com> wrote:
>
> Both arm and arm64 kernel entry point have the following prerequisite:
>   MMU = off, D-cache = off, I-cache = dont care.
>
> HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
> new kernel.
>
> Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
> off, and KVM resets them when its unload. These are achieved by
> HVC_RESET_VECTORS call.
>
> Improve the document.
>
> Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
> Cc: James Morse <james.morse@arm.com>
> Cc: Russell King <linux@armlinux.org.uk>
> Cc: Marc Zyngier <maz@kernel.org>
> Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: linux-doc@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> To: kvmarm@lists.cs.columbia.edu
> ---
>  Documentation/virt/kvm/arm/hyp-abi.rst | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
> index d9eba93..a95bc30 100644
> --- a/Documentation/virt/kvm/arm/hyp-abi.rst
> +++ b/Documentation/virt/kvm/arm/hyp-abi.rst
> @@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>
>  * ::
>
> -    r0/x0 = HVC_RESET_VECTORS
> +    x0 = HVC_RESET_VECTORS (arm64 only)
>
> -  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
> +  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
>    stubs' exception vector value. This effectively disables an existing
>    hypervisor.
>
> @@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>      x3 = x1's value when entering the next payload (arm64)
>      x4 = x2's value when entering the next payload (arm64)
>
> -  Mask all exceptions, disable the MMU, move the arguments into place
> +  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
>    (arm64 only), and jump to the restart address while at HYP/EL2. This
>    hypercall is not expected to return to its caller.
>
> --
> 2.7.5
>
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

Re: [PATCH] arm(64)/kvm: improve the documentation about HVC calls

[James Morse]

Hi Pingfan,

On 12/08/2020 15:05, Pingfan Liu wrote:
> Both arm and arm64 kernel entry point have the following prerequisite:
>   MMU = off, D-cache = off, I-cache = dont care.
> 
> HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
> new kernel.

I think you have this the wrong way up. This should describe what HVC_SOFT_RESTART does.

We want to remove some extra work kexec does on arm64, and both implementations of
HVC_SOFT_RESTART on arm64 already do what we need. The change here should be to document
that the D/I bits are cleared after a HVC_SOFT_RESTART on arm64.


> Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
> off, and KVM resets them when its unload. These are achieved by
> HVC_RESET_VECTORS call.
> 
> Improve the document.


> diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
> index d9eba93..a95bc30 100644
> --- a/Documentation/virt/kvm/arm/hyp-abi.rst
> +++ b/Documentation/virt/kvm/arm/hyp-abi.rst
> @@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>  
>  * ::
>  
> -    r0/x0 = HVC_RESET_VECTORS
> +    x0 = HVC_RESET_VECTORS (arm64 only)
>  
> -  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
> +  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
>    stubs' exception vector value. This effectively disables an existing
>    hypervisor.

I don't think we should remove this. KVM on 32bit was the only implementer, but if there
ever is another, this is how it should work.


> @@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>      x3 = x1's value when entering the next payload (arm64)
>      x4 = x2's value when entering the next payload (arm64)
>  
> -  Mask all exceptions, disable the MMU, move the arguments into place
> +  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
>    (arm64 only), and jump to the restart address while at HYP/EL2. This
>    hypercall is not expected to return to its caller.

(I don't think disable the D-cache is what the bit does, it forces the attributes that are
used for a data access).

Please just describe this as the on arm64 the D and I bits are cleared.
(it might be true on 32bit, I can't work the assembly out).


Thanks,

James

Re: [PATCH] arm(64)/kvm: improve the documentation about HVC calls

[James Morse]

Hi Pingfan,

On 12/08/2020 15:05, Pingfan Liu wrote:
> Both arm and arm64 kernel entry point have the following prerequisite:
>   MMU = off, D-cache = off, I-cache = dont care.
> 
> HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
> new kernel.

I think you have this the wrong way up. This should describe what HVC_SOFT_RESTART does.

We want to remove some extra work kexec does on arm64, and both implementations of
HVC_SOFT_RESTART on arm64 already do what we need. The change here should be to document
that the D/I bits are cleared after a HVC_SOFT_RESTART on arm64.


> Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
> off, and KVM resets them when its unload. These are achieved by
> HVC_RESET_VECTORS call.
> 
> Improve the document.


> diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
> index d9eba93..a95bc30 100644
> --- a/Documentation/virt/kvm/arm/hyp-abi.rst
> +++ b/Documentation/virt/kvm/arm/hyp-abi.rst
> @@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>  
>  * ::
>  
> -    r0/x0 = HVC_RESET_VECTORS
> +    x0 = HVC_RESET_VECTORS (arm64 only)
>  
> -  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
> +  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
>    stubs' exception vector value. This effectively disables an existing
>    hypervisor.

I don't think we should remove this. KVM on 32bit was the only implementer, but if there
ever is another, this is how it should work.


> @@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>      x3 = x1's value when entering the next payload (arm64)
>      x4 = x2's value when entering the next payload (arm64)
>  
> -  Mask all exceptions, disable the MMU, move the arguments into place
> +  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
>    (arm64 only), and jump to the restart address while at HYP/EL2. This
>    hypercall is not expected to return to its caller.

(I don't think disable the D-cache is what the bit does, it forces the attributes that are
used for a data access).

Please just describe this as the on arm64 the D and I bits are cleared.
(it might be true on 32bit, I can't work the assembly out).


Thanks,

James




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] arm(64)/kvm: improve the documentation about HVC calls

[James Morse]

Hi Pingfan,

On 12/08/2020 15:05, Pingfan Liu wrote:
> Both arm and arm64 kernel entry point have the following prerequisite:
>   MMU = off, D-cache = off, I-cache = dont care.
> 
> HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
> new kernel.

I think you have this the wrong way up. This should describe what HVC_SOFT_RESTART does.

We want to remove some extra work kexec does on arm64, and both implementations of
HVC_SOFT_RESTART on arm64 already do what we need. The change here should be to document
that the D/I bits are cleared after a HVC_SOFT_RESTART on arm64.


> Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
> off, and KVM resets them when its unload. These are achieved by
> HVC_RESET_VECTORS call.
> 
> Improve the document.


> diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
> index d9eba93..a95bc30 100644
> --- a/Documentation/virt/kvm/arm/hyp-abi.rst
> +++ b/Documentation/virt/kvm/arm/hyp-abi.rst
> @@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>  
>  * ::
>  
> -    r0/x0 = HVC_RESET_VECTORS
> +    x0 = HVC_RESET_VECTORS (arm64 only)
>  
> -  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
> +  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
>    stubs' exception vector value. This effectively disables an existing
>    hypervisor.

I don't think we should remove this. KVM on 32bit was the only implementer, but if there
ever is another, this is how it should work.


> @@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
>      x3 = x1's value when entering the next payload (arm64)
>      x4 = x2's value when entering the next payload (arm64)
>  
> -  Mask all exceptions, disable the MMU, move the arguments into place
> +  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
>    (arm64 only), and jump to the restart address while at HYP/EL2. This
>    hypercall is not expected to return to its caller.

(I don't think disable the D-cache is what the bit does, it forces the attributes that are
used for a data access).

Please just describe this as the on arm64 the D and I bits are cleared.
(it might be true on 32bit, I can't work the assembly out).


Thanks,

James



_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

Re: [PATCH] arm(64)/kvm: improve the documentation about HVC calls

[Pingfan Liu]

On Thu, Aug 27, 2020 at 2:10 AM James Morse <james.morse@arm.com> wrote:
>
> Hi Pingfan,
>
> On 12/08/2020 15:05, Pingfan Liu wrote:
> > Both arm and arm64 kernel entry point have the following prerequisite:
> >   MMU = off, D-cache = off, I-cache = dont care.
> >
> > HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
> > new kernel.
>
> I think you have this the wrong way up. This should describe what HVC_SOFT_RESTART does.
Yes, it is a wrong way.

>
> We want to remove some extra work kexec does on arm64, and both implementations of
> HVC_SOFT_RESTART on arm64 already do what we need. The change here should be to document
> that the D/I bits are cleared after a HVC_SOFT_RESTART on arm64.
>
>
> > Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
> > off, and KVM resets them when its unload. These are achieved by
> > HVC_RESET_VECTORS call.
> >
> > Improve the document.
>
>
> > diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
> > index d9eba93..a95bc30 100644
> > --- a/Documentation/virt/kvm/arm/hyp-abi.rst
> > +++ b/Documentation/virt/kvm/arm/hyp-abi.rst
> > @@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
> >
> >  * ::
> >
> > -    r0/x0 = HVC_RESET_VECTORS
> > +    x0 = HVC_RESET_VECTORS (arm64 only)
> >
> > -  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
> > +  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
> >    stubs' exception vector value. This effectively disables an existing
> >    hypervisor.
>
> I don't think we should remove this. KVM on 32bit was the only implementer, but if there
> ever is another, this is how it should work.
>
>
> > @@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
> >      x3 = x1's value when entering the next payload (arm64)
> >      x4 = x2's value when entering the next payload (arm64)
> >
> > -  Mask all exceptions, disable the MMU, move the arguments into place
> > +  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
> >    (arm64 only), and jump to the restart address while at HYP/EL2. This
> >    hypercall is not expected to return to its caller.
>
> (I don't think disable the D-cache is what the bit does, it forces the attributes that are
> used for a data access).
>
> Please just describe this as the on arm64 the D and I bits are cleared.
OK, I will do it.

> (it might be true on 32bit, I can't work the assembly out).
I will leave 32bit as it is.

Thanks,
Pingfan

Re: [PATCH] arm(64)/kvm: improve the documentation about HVC calls

[Pingfan Liu]

On Thu, Aug 27, 2020 at 2:10 AM James Morse <james.morse@arm.com> wrote:
>
> Hi Pingfan,
>
> On 12/08/2020 15:05, Pingfan Liu wrote:
> > Both arm and arm64 kernel entry point have the following prerequisite:
> >   MMU = off, D-cache = off, I-cache = dont care.
> >
> > HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
> > new kernel.
>
> I think you have this the wrong way up. This should describe what HVC_SOFT_RESTART does.
Yes, it is a wrong way.

>
> We want to remove some extra work kexec does on arm64, and both implementations of
> HVC_SOFT_RESTART on arm64 already do what we need. The change here should be to document
> that the D/I bits are cleared after a HVC_SOFT_RESTART on arm64.
>
>
> > Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
> > off, and KVM resets them when its unload. These are achieved by
> > HVC_RESET_VECTORS call.
> >
> > Improve the document.
>
>
> > diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
> > index d9eba93..a95bc30 100644
> > --- a/Documentation/virt/kvm/arm/hyp-abi.rst
> > +++ b/Documentation/virt/kvm/arm/hyp-abi.rst
> > @@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
> >
> >  * ::
> >
> > -    r0/x0 = HVC_RESET_VECTORS
> > +    x0 = HVC_RESET_VECTORS (arm64 only)
> >
> > -  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
> > +  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
> >    stubs' exception vector value. This effectively disables an existing
> >    hypervisor.
>
> I don't think we should remove this. KVM on 32bit was the only implementer, but if there
> ever is another, this is how it should work.
>
>
> > @@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
> >      x3 = x1's value when entering the next payload (arm64)
> >      x4 = x2's value when entering the next payload (arm64)
> >
> > -  Mask all exceptions, disable the MMU, move the arguments into place
> > +  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
> >    (arm64 only), and jump to the restart address while at HYP/EL2. This
> >    hypercall is not expected to return to its caller.
>
> (I don't think disable the D-cache is what the bit does, it forces the attributes that are
> used for a data access).
>
> Please just describe this as the on arm64 the D and I bits are cleared.
OK, I will do it.

> (it might be true on 32bit, I can't work the assembly out).
I will leave 32bit as it is.

Thanks,
Pingfan

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] arm(64)/kvm: improve the documentation about HVC calls

[Pingfan Liu]

On Thu, Aug 27, 2020 at 2:10 AM James Morse <james.morse@arm.com> wrote:
>
> Hi Pingfan,
>
> On 12/08/2020 15:05, Pingfan Liu wrote:
> > Both arm and arm64 kernel entry point have the following prerequisite:
> >   MMU = off, D-cache = off, I-cache = dont care.
> >
> > HVC_SOFT_RESTART call should meet this prerequisite before jumping to the
> > new kernel.
>
> I think you have this the wrong way up. This should describe what HVC_SOFT_RESTART does.
Yes, it is a wrong way.

>
> We want to remove some extra work kexec does on arm64, and both implementations of
> HVC_SOFT_RESTART on arm64 already do what we need. The change here should be to document
> that the D/I bits are cleared after a HVC_SOFT_RESTART on arm64.
>
>
> > Furthermore, on arm64, el2_setup doesn't set I+C bits and keeps EL2 MMU
> > off, and KVM resets them when its unload. These are achieved by
> > HVC_RESET_VECTORS call.
> >
> > Improve the document.
>
>
> > diff --git a/Documentation/virt/kvm/arm/hyp-abi.rst b/Documentation/virt/kvm/arm/hyp-abi.rst
> > index d9eba93..a95bc30 100644
> > --- a/Documentation/virt/kvm/arm/hyp-abi.rst
> > +++ b/Documentation/virt/kvm/arm/hyp-abi.rst
> > @@ -40,9 +40,9 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
> >
> >  * ::
> >
> > -    r0/x0 = HVC_RESET_VECTORS
> > +    x0 = HVC_RESET_VECTORS (arm64 only)
> >
> > -  Turn HYP/EL2 MMU off, and reset HVBAR/VBAR_EL2 to the initials
> > +  Disable HYP/EL2 MMU and D-cache, and reset HVBAR/VBAR_EL2 to the initials
> >    stubs' exception vector value. This effectively disables an existing
> >    hypervisor.
>
> I don't think we should remove this. KVM on 32bit was the only implementer, but if there
> ever is another, this is how it should work.
>
>
> > @@ -54,7 +54,7 @@ these functions (see arch/arm{,64}/include/asm/virt.h):
> >      x3 = x1's value when entering the next payload (arm64)
> >      x4 = x2's value when entering the next payload (arm64)
> >
> > -  Mask all exceptions, disable the MMU, move the arguments into place
> > +  Mask all exceptions, disable the MMU and D-cache, move the arguments into place
> >    (arm64 only), and jump to the restart address while at HYP/EL2. This
> >    hypercall is not expected to return to its caller.
>
> (I don't think disable the D-cache is what the bit does, it forces the attributes that are
> used for a data access).
>
> Please just describe this as the on arm64 the D and I bits are cleared.
OK, I will do it.

> (it might be true on 32bit, I can't work the assembly out).
I will leave 32bit as it is.

Thanks,
Pingfan
_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm