* Yocto Layers not getting recognized by bitbake @ 2013-06-17 17:08 varun bhatnagar 2013-06-17 17:33 ` Gary Thomas 0 siblings, 1 reply; 16+ messages in thread From: varun bhatnagar @ 2013-06-17 17:08 UTC (permalink / raw) To: yocto [-- Attachment #1: Type: text/plain, Size: 285 bytes --] Hi, I am trying to compile my code using yocto. For that I have created two layers: "meta-networking" and "meta-oe". I have added these dependencies in bblayer.conf too. But these are not getting build. Can anyone please tell me what should I do to make this work. // Varun [-- Attachment #2: Type: text/html, Size: 402 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-17 17:08 Yocto Layers not getting recognized by bitbake varun bhatnagar @ 2013-06-17 17:33 ` Gary Thomas 2013-06-17 18:03 ` varun bhatnagar 0 siblings, 1 reply; 16+ messages in thread From: Gary Thomas @ 2013-06-17 17:33 UTC (permalink / raw) To: yocto On 2013-06-17 18:08, varun bhatnagar wrote: > Hi, > > I am trying to compile my code using yocto. For that I have created two layers: "meta-networking" and "meta-oe". I have added these dependencies in bblayer.conf too. But these are > not getting build. Can anyone please tell me what should I do to make this work. More details are needed to be able to help. What do you mean "not getting built"? Do you mean that if you try to build recipe XYZ which is in one of those layers that it's not being built? Or perhaps you mean something else? What do you mean "created two layers: ..."? Did you just extract these from meta-openembedded? or something else? -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-17 17:33 ` Gary Thomas @ 2013-06-17 18:03 ` varun bhatnagar 2013-06-17 21:02 ` Sudhangathan B S 0 siblings, 1 reply; 16+ messages in thread From: varun bhatnagar @ 2013-06-17 18:03 UTC (permalink / raw) To: yocto [-- Attachment #1: Type: text/plain, Size: 1731 bytes --] Actually the package which I am building is having some dependencies on some libraries. So I provided those libraries with the help of creating layers. I did not extract those from meta-openembedded, instead, I manually created two layers and added them in bblayer.conf file. Now, after configuring all this stuff I am again trying to recompile my code but still I am getting the same error saying that it is not able to find those libraries provided by me in the form of layers. On Mon, Jun 17, 2013 at 11:03 PM, Gary Thomas <gary@mlbassoc.com> wrote: > On 2013-06-17 18:08, varun bhatnagar wrote: > >> Hi, >> >> I am trying to compile my code using yocto. For that I have created two >> layers: "meta-networking" and "meta-oe". I have added these dependencies in >> bblayer.conf too. But these are >> not getting build. Can anyone please tell me what should I do to make >> this work. >> > > More details are needed to be able to help. > > What do you mean "not getting built"? Do you mean that if you > try to build recipe XYZ which is in one of those layers that it's > not being built? Or perhaps you mean something else? > > What do you mean "created two layers: ..."? Did you just extract > these from meta-openembedded? or something else? > > -- > ------------------------------**------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------**------------------------------ > ______________________________**_________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> > [-- Attachment #2: Type: text/html, Size: 2424 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-17 18:03 ` varun bhatnagar @ 2013-06-17 21:02 ` Sudhangathan B S 2013-06-18 16:28 ` varun bhatnagar 0 siblings, 1 reply; 16+ messages in thread From: Sudhangathan B S @ 2013-06-17 21:02 UTC (permalink / raw) To: varun bhatnagar; +Cc: yocto [-- Attachment #1: Type: text/plain, Size: 2322 bytes --] Can you please paste your command and it's output here..! If you don't mind..!! Or explain with equivalent clarity. It l will good if you can also put in your directory structure. --------------------------------- Sudhangathan BS Ph:(+91) 9731-905-205 --------------------------------- On Mon, Jun 17, 2013 at 11:33 PM, varun bhatnagar <varun292006@gmail.com>wrote: > Actually the package which I am building is having some dependencies on > some libraries. So I provided those libraries with the help of creating > layers. I did not extract those from meta-openembedded, instead, I manually > created two layers and added them in bblayer.conf file. Now, after > configuring all this stuff I am again trying to recompile my code but still > I am getting the same error saying that it is not able to find those > libraries provided by me in the form of layers. > > > On Mon, Jun 17, 2013 at 11:03 PM, Gary Thomas <gary@mlbassoc.com> wrote: > >> On 2013-06-17 18:08, varun bhatnagar wrote: >> >>> Hi, >>> >>> I am trying to compile my code using yocto. For that I have created two >>> layers: "meta-networking" and "meta-oe". I have added these dependencies in >>> bblayer.conf too. But these are >>> not getting build. Can anyone please tell me what should I do to make >>> this work. >>> >> >> More details are needed to be able to help. >> >> What do you mean "not getting built"? Do you mean that if you >> try to build recipe XYZ which is in one of those layers that it's >> not being built? Or perhaps you mean something else? >> >> What do you mean "created two layers: ..."? Did you just extract >> these from meta-openembedded? or something else? >> >> -- >> ------------------------------**------------------------------ >> Gary Thomas | Consulting for the >> MLB Associates | Embedded world >> ------------------------------**------------------------------ >> ______________________________**_________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >> > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > > [-- Attachment #2: Type: text/html, Size: 3459 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-17 21:02 ` Sudhangathan B S @ 2013-06-18 16:28 ` varun bhatnagar 2013-06-18 16:41 ` Gary Thomas 0 siblings, 1 reply; 16+ messages in thread From: varun bhatnagar @ 2013-06-18 16:28 UTC (permalink / raw) To: yocto [-- Attachment #1: Type: text/plain, Size: 3272 bytes --] I am building one of my application using yocto by giving bitbake -k core-image-minimal command but I am facing some errors as this application requires two libraries *1) net-snmp* *2) fuse* * * I have one link where in they are asking to add these two libraries in the form of layers and then execute bitbake -k core-image-minimal command. I am pasting one screenshot below: As you can I have added two layers meta-networking (contains net-snmp) and meta-oe(contains fuse). After this I added these layers in * build/conf/bblayer.conf.* * * * * After this I again executed bitbake -k core-image-minimal command but I faced the same error as before... :( Is there anyway that these layers get recognized? Do I need to execute some other command? // Varun On Tue, Jun 18, 2013 at 2:32 AM, Sudhangathan B S <sudhangathan@gmail.com>wrote: > Can you please paste your command and it's output here..! If you don't > mind..!! Or explain with equivalent clarity. It > l will good if you can also put in your directory structure. > > --------------------------------- > Sudhangathan BS > Ph:(+91) 9731-905-205 > --------------------------------- > > > On Mon, Jun 17, 2013 at 11:33 PM, varun bhatnagar <varun292006@gmail.com>wrote: > >> Actually the package which I am building is having some dependencies on >> some libraries. So I provided those libraries with the help of creating >> layers. I did not extract those from meta-openembedded, instead, I manually >> created two layers and added them in bblayer.conf file. Now, after >> configuring all this stuff I am again trying to recompile my code but still >> I am getting the same error saying that it is not able to find those >> libraries provided by me in the form of layers. >> >> >> On Mon, Jun 17, 2013 at 11:03 PM, Gary Thomas <gary@mlbassoc.com> wrote: >> >>> On 2013-06-17 18:08, varun bhatnagar wrote: >>> >>>> Hi, >>>> >>>> I am trying to compile my code using yocto. For that I have created two >>>> layers: "meta-networking" and "meta-oe". I have added these dependencies in >>>> bblayer.conf too. But these are >>>> not getting build. Can anyone please tell me what should I do to make >>>> this work. >>>> >>> >>> More details are needed to be able to help. >>> >>> What do you mean "not getting built"? Do you mean that if you >>> try to build recipe XYZ which is in one of those layers that it's >>> not being built? Or perhaps you mean something else? >>> >>> What do you mean "created two layers: ..."? Did you just extract >>> these from meta-openembedded? or something else? >>> >>> -- >>> ------------------------------**------------------------------ >>> Gary Thomas | Consulting for the >>> MLB Associates | Embedded world >>> ------------------------------**------------------------------ >>> ______________________________**_________________ >>> yocto mailing list >>> yocto@yoctoproject.org >>> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >>> >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> >> > [-- Attachment #2: Type: text/html, Size: 5597 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-18 16:28 ` varun bhatnagar @ 2013-06-18 16:41 ` Gary Thomas 2013-06-19 16:10 ` varun bhatnagar 0 siblings, 1 reply; 16+ messages in thread From: Gary Thomas @ 2013-06-18 16:41 UTC (permalink / raw) To: yocto On 2013-06-18 17:28, varun bhatnagar wrote: > I am building one of my application using yocto by giving bitbake -k core-image-minimal command but I am facing some errors as this application requires two libraries > *1) net-snmp* > *2) fuse* > * > * > I have one link where in they are asking to add these two libraries in the form of layers and then execute bitbake -k core-image-minimal command. > > I am pasting one screenshot below: > > As you can I have added two layers meta-networking (contains net-snmp) and meta-oe(contains fuse). After this I added these layers in *build/conf/bblayer.conf.* > * > * > * > * > After this I again executed bitbake -k core-image-minimal command but I faced the same error as before... :( > Is there anyway that these layers get recognized? Do I need to execute some other command? Obviously, this is a recipe that you made. Does it show these dependencies? e.g. a line like this in your recipe file: DEPENDS = "net-snmp fuse" (or whatever the *packages* that you need are) Bitbake can't read your mind; it will only build the recipes you ask and the dependencies which are explicitly specified in that build chain. If you still have trouble, try sending your recipe (.bb file and all other components you might have), bblayers.conf, etc to the list because we're not mind readers either :-) > > On Tue, Jun 18, 2013 at 2:32 AM, Sudhangathan B S <sudhangathan@gmail.com <mailto:sudhangathan@gmail.com>> wrote: > > Can you please paste your command and it's output here..! If you don't mind..!! Or explain with equivalent clarity. It > l will good if you can also put in your directory structure. > > --------------------------------- > Sudhangathan BS > Ph:(+91) 9731-905-205 > --------------------------------- > > > On Mon, Jun 17, 2013 at 11:33 PM, varun bhatnagar <varun292006@gmail.com <mailto:varun292006@gmail.com>> wrote: > > Actually the package which I am building is having some dependencies on some libraries. So I provided those libraries with the help of creating layers. I did not extract > those from meta-openembedded, instead, I manually created two layers and added them in bblayer.conf file. Now, after configuring all this stuff I am again trying to > recompile my code but still I am getting the same error saying that it is not able to find those libraries provided by me in the form of layers. > > > On Mon, Jun 17, 2013 at 11:03 PM, Gary Thomas <gary@mlbassoc.com <mailto:gary@mlbassoc.com>> wrote: > > On 2013-06-17 18:08, varun bhatnagar wrote: > > Hi, > > I am trying to compile my code using yocto. For that I have created two layers: "meta-networking" and "meta-oe". I have added these dependencies in bblayer.conf > too. But these are > not getting build. Can anyone please tell me what should I do to make this work. > > > More details are needed to be able to help. > > What do you mean "not getting built"? Do you mean that if you > try to build recipe XYZ which is in one of those layers that it's > not being built? Or perhaps you mean something else? > > What do you mean "created two layers: ..."? Did you just extract > these from meta-openembedded? or something else? > > -- > ------------------------------__------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------__------------------------------ > _________________________________________________ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> > https://lists.yoctoproject.__org/listinfo/yocto <https://lists.yoctoproject.org/listinfo/yocto> > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> > https://lists.yoctoproject.org/listinfo/yocto > > > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-18 16:41 ` Gary Thomas @ 2013-06-19 16:10 ` varun bhatnagar 2013-06-22 19:04 ` varun bhatnagar 0 siblings, 1 reply; 16+ messages in thread From: varun bhatnagar @ 2013-06-19 16:10 UTC (permalink / raw) To: yocto [-- Attachment #1.1: Type: text/plain, Size: 5635 bytes --] Thanks for the reply Gary. I am attaching recipe file below. Please have a look at it. And yes, there is a line where in all the dependencies are given. And this is the link from where I created the layer : http://cgit.openembedded.org/meta-openembedded/tree/ // Varun On Tue, Jun 18, 2013 at 10:11 PM, Gary Thomas <gary@mlbassoc.com> wrote: > On 2013-06-18 17:28, varun bhatnagar wrote: > >> I am building one of my application using yocto by giving bitbake -k >> core-image-minimal command but I am facing some errors as this application >> requires two libraries >> *1) net-snmp* >> *2) fuse* >> * >> >> * >> I have one link where in they are asking to add these two libraries in >> the form of layers and then execute bitbake -k core-image-minimal command. >> >> I am pasting one screenshot below: >> >> As you can I have added two layers meta-networking (contains net-snmp) >> and meta-oe(contains fuse). After this I added these layers in >> *build/conf/bblayer.conf.* >> * >> * >> * >> >> * >> After this I again executed bitbake -k core-image-minimal command but I >> faced the same error as before... :( >> Is there anyway that these layers get recognized? Do I need to execute >> some other command? >> > > Obviously, this is a recipe that you made. > > Does it show these dependencies? e.g. a line like this in your recipe > file: > DEPENDS = "net-snmp fuse" > (or whatever the *packages* that you need are) > > Bitbake can't read your mind; it will only build the recipes you ask and > the > dependencies which are explicitly specified in that build chain. > > If you still have trouble, try sending your recipe (.bb file and all other > components you might have), bblayers.conf, etc to the list because we're > not > mind readers either :-) > > >> On Tue, Jun 18, 2013 at 2:32 AM, Sudhangathan B S <sudhangathan@gmail.com<mailto: >> sudhangathan@gmail.com**>> wrote: >> >> Can you please paste your command and it's output here..! If you >> don't mind..!! Or explain with equivalent clarity. It >> l will good if you can also put in your directory structure. >> >> ------------------------------**--- >> Sudhangathan BS >> Ph:(+91) 9731-905-205 >> ------------------------------**--- >> >> >> On Mon, Jun 17, 2013 at 11:33 PM, varun bhatnagar < >> varun292006@gmail.com <mailto:varun292006@gmail.com>**> wrote: >> >> Actually the package which I am building is having some >> dependencies on some libraries. So I provided those libraries with the help >> of creating layers. I did not extract >> those from meta-openembedded, instead, I manually created two >> layers and added them in bblayer.conf file. Now, after configuring all this >> stuff I am again trying to >> recompile my code but still I am getting the same error saying >> that it is not able to find those libraries provided by me in the form of >> layers. >> >> >> On Mon, Jun 17, 2013 at 11:03 PM, Gary Thomas <gary@mlbassoc.com<mailto: >> gary@mlbassoc.com>> wrote: >> >> On 2013-06-17 18:08, varun bhatnagar wrote: >> >> Hi, >> >> I am trying to compile my code using yocto. For that I >> have created two layers: "meta-networking" and "meta-oe". I have added >> these dependencies in bblayer.conf >> too. But these are >> not getting build. Can anyone please tell me what should >> I do to make this work. >> >> >> More details are needed to be able to help. >> >> What do you mean "not getting built"? Do you mean that if you >> try to build recipe XYZ which is in one of those layers that >> it's >> not being built? Or perhaps you mean something else? >> >> What do you mean "created two layers: ..."? Did you just >> extract >> these from meta-openembedded? or something else? >> >> -- >> ------------------------------** >> __----------------------------**-- >> >> Gary Thomas | Consulting for the >> MLB Associates | Embedded world >> ------------------------------** >> __----------------------------**-- >> ______________________________**___________________ >> yocto mailing list >> yocto@yoctoproject.org <mailto:yocto@yoctoproject.org**> >> https://lists.yoctoproject.__**org/listinfo/yocto < >> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >> > >> >> >> >> ______________________________**_________________ >> yocto mailing list >> yocto@yoctoproject.org <mailto:yocto@yoctoproject.org**> >> >> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >> >> >> >> >> >> ______________________________**_________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> >> >> > -- > ------------------------------**------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------**------------------------------ > ______________________________**_________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> > [-- Attachment #1.2: Type: text/html, Size: 7758 bytes --] [-- Attachment #2: myRecipe.bb.txt --] [-- Type: text/plain, Size: 790 bytes --] DESCRIPTION = "bitake file" DEPENDS = "net-snmp fuse" RDEPENDS = "curl rpm openssh openldap procps psmisc sed net-snmp-server" LICENSE = "GPLv2+" PR = "r0" SRC_URI = "file:///home/user/Myapp.tar.gz" EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH=${STAGING_DIR_HOST} " EXTRA_OECMAKE += "-DTARGET_ARCHITECTURE=${TARGET_ARCH} " EXTRA_OECMAKE += "-DCMAKE_SYSTEM_NAME=Linux " EXTRA_OECMAKE += "-DCMAKE_SYSTEM_VERSION=1 " EXTRA_OECMAKE += "-DRSTATE=${PR} " EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM=NEVER " EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY " EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY " EXTRA_OECMAKE += "-DRPM=1 " inherit cmake do_configure(){ cmake ..${EXTRA_OECMAKE} } do_compile(){ oe_runmake all } ^ permalink raw reply [flat|nested] 16+ messages in thread
* Yocto Layers not getting recognized by bitbake 2013-06-19 16:10 ` varun bhatnagar @ 2013-06-22 19:04 ` varun bhatnagar 2013-06-25 10:46 ` Paul Eggleton 0 siblings, 1 reply; 16+ messages in thread From: varun bhatnagar @ 2013-06-22 19:04 UTC (permalink / raw) To: yocto [-- Attachment #1.1: Type: text/plain, Size: 8929 bytes --] Hi, Sorry I am sending this again but can anybody suggest something for this problem please (please go through the mail chain below). // Varun Forwarded conversation Subject: Yocto Layers not getting recognized by bitbake ------------------------ From: *varun bhatnagar* <varun292006@gmail.com> Date: Mon, Jun 17, 2013 at 10:38 PM To: "yocto@yoctoproject.org" <yocto@yoctoproject.org> Hi, I am trying to compile my code using yocto. For that I have created two layers: "meta-networking" and "meta-oe". I have added these dependencies in bblayer.conf too. But these are not getting build. Can anyone please tell me what should I do to make this work. // Varun ---------- From: *Gary Thomas* <gary@mlbassoc.com> Date: Mon, Jun 17, 2013 at 11:03 PM To: yocto@yoctoproject.org More details are needed to be able to help. What do you mean "not getting built"? Do you mean that if you try to build recipe XYZ which is in one of those layers that it's not being built? Or perhaps you mean something else? What do you mean "created two layers: ..."? Did you just extract these from meta-openembedded? or something else? -- ------------------------------**------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------**------------------------------ ______________________________**_________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> ---------- From: *varun bhatnagar* <varun292006@gmail.com> Date: Mon, Jun 17, 2013 at 11:33 PM To: "yocto@yoctoproject.org" <yocto@yoctoproject.org> Actually the package which I am building is having some dependencies on some libraries. So I provided those libraries with the help of creating layers. I did not extract those from meta-openembedded, instead, I manually created two layers and added them in bblayer.conf file. Now, after configuring all this stuff I am again trying to recompile my code but still I am getting the same error saying that it is not able to find those libraries provided by me in the form of layers. ---------- From: *Sudhangathan B S* <sudhangathan@gmail.com> Date: Tue, Jun 18, 2013 at 2:32 AM To: varun bhatnagar <varun292006@gmail.com> Cc: "yocto@yoctoproject.org" <yocto@yoctoproject.org> Can you please paste your command and it's output here..! If you don't mind..!! Or explain with equivalent clarity. It l will good if you can also put in your directory structure. --------------------------------- Sudhangathan BS Ph:(+91) 9731-905-205 --------------------------------- ---------- From: *varun bhatnagar* <varun292006@gmail.com> Date: Tue, Jun 18, 2013 at 9:58 PM To: "yocto@yoctoproject.org" <yocto@yoctoproject.org> I am building one of my application using yocto by giving bitbake -k core-image-minimal command but I am facing some errors as this application requires two libraries *1) net-snmp* *2) fuse* * * I have one link where in they are asking to add these two libraries in the form of layers and then execute bitbake -k core-image-minimal command. I am pasting one screenshot below: As you can I have added two layers meta-networking (contains net-snmp) and meta-oe(contains fuse). After this I added these layers in * build/conf/bblayer.conf.* * * * * After this I again executed bitbake -k core-image-minimal command but I faced the same error as before... :( Is there anyway that these layers get recognized? Do I need to execute some other command? // Varun ---------- From: *Gary Thomas* <gary@mlbassoc.com> Date: Tue, Jun 18, 2013 at 10:11 PM To: yocto@yoctoproject.org On 2013-06-18 17:28, varun bhatnagar wrote: > I am building one of my application using yocto by giving bitbake -k > core-image-minimal command but I am facing some errors as this application > requires two libraries > *1) net-snmp* > *2) fuse* > * > > * > I have one link where in they are asking to add these two libraries in the > form of layers and then execute bitbake -k core-image-minimal command. > > I am pasting one screenshot below: > > As you can I have added two layers meta-networking (contains net-snmp) and > meta-oe(contains fuse). After this I added these layers in > *build/conf/bblayer.conf.* > * > * > * > > * > After this I again executed bitbake -k core-image-minimal command but I > faced the same error as before... :( > Is there anyway that these layers get recognized? Do I need to execute > some other command? > Obviously, this is a recipe that you made. Does it show these dependencies? e.g. a line like this in your recipe file: DEPENDS = "net-snmp fuse" (or whatever the *packages* that you need are) Bitbake can't read your mind; it will only build the recipes you ask and the dependencies which are explicitly specified in that build chain. If you still have trouble, try sending your recipe (.bb file and all other components you might have), bblayers.conf, etc to the list because we're not mind readers either :-) > On Tue, Jun 18, 2013 at 2:32 AM, Sudhangathan B S <sudhangathan@gmail.com<mailto: > sudhangathan@gmail.com**>> wrote: > > Can you please paste your command and it's output here..! If you don't > mind..!! Or explain with equivalent clarity. It > l will good if you can also put in your directory structure. > > ------------------------------**--- > Sudhangathan BS > Ph:(+91) 9731-905-205 > ------------------------------**--- > > > On Mon, Jun 17, 2013 at 11:33 PM, varun bhatnagar < > varun292006@gmail.com <mailto:varun292006@gmail.com>**> wrote: > > Actually the package which I am building is having some > dependencies on some libraries. So I provided those libraries with the help > of creating layers. I did not extract > those from meta-openembedded, instead, I manually created two > layers and added them in bblayer.conf file. Now, after configuring all this > stuff I am again trying to > recompile my code but still I am getting the same error saying > that it is not able to find those libraries provided by me in the form of > layers. > > > On Mon, Jun 17, 2013 at 11:03 PM, Gary Thomas <gary@mlbassoc.com<mailto: > gary@mlbassoc.com>> wrote: > > On 2013-06-17 18:08, varun bhatnagar wrote: > > Hi, > > I am trying to compile my code using yocto. For that I > have created two layers: "meta-networking" and "meta-oe". I have added > these dependencies in bblayer.conf > too. But these are > not getting build. Can anyone please tell me what should I > do to make this work. > > > More details are needed to be able to help. > > What do you mean "not getting built"? Do you mean that if you > try to build recipe XYZ which is in one of those layers that > it's > not being built? Or perhaps you mean something else? > > What do you mean "created two layers: ..."? Did you just > extract > these from meta-openembedded? or something else? > > -- > ------------------------------**__---------------------------- > **-- > > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------**__---------------------------- > **-- > ______________________________**___________________ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org**> > https://lists.yoctoproject.__**org/listinfo/yocto < > https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> > > > > > > ______________________________**_________________ > yocto mailing list > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org**> > > https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> > > > > > > ______________________________**_________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto> > > ---------- From: *varun bhatnagar* <varun292006@gmail.com> Date: Wed, Jun 19, 2013 at 9:40 PM To: "yocto@yoctoproject.org" <yocto@yoctoproject.org> Thanks for the reply Gary. I am attaching recipe file below. Please have a look at it. And yes, there is a line where in all the dependencies are given. And this is the link from where I created the layer : http://cgit.openembedded.org/meta-openembedded/tree/ // Varun [-- Attachment #1.2: Type: text/html, Size: 14072 bytes --] [-- Attachment #2: myRecipe.bb.txt --] [-- Type: text/plain, Size: 790 bytes --] DESCRIPTION = "bitake file" DEPENDS = "net-snmp fuse" RDEPENDS = "curl rpm openssh openldap procps psmisc sed net-snmp-server" LICENSE = "GPLv2+" PR = "r0" SRC_URI = "file:///home/user/Myapp.tar.gz" EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH=${STAGING_DIR_HOST} " EXTRA_OECMAKE += "-DTARGET_ARCHITECTURE=${TARGET_ARCH} " EXTRA_OECMAKE += "-DCMAKE_SYSTEM_NAME=Linux " EXTRA_OECMAKE += "-DCMAKE_SYSTEM_VERSION=1 " EXTRA_OECMAKE += "-DRSTATE=${PR} " EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM=NEVER " EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY " EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY " EXTRA_OECMAKE += "-DRPM=1 " inherit cmake do_configure(){ cmake ..${EXTRA_OECMAKE} } do_compile(){ oe_runmake all } ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-22 19:04 ` varun bhatnagar @ 2013-06-25 10:46 ` Paul Eggleton 2013-06-25 19:04 ` varun bhatnagar 0 siblings, 1 reply; 16+ messages in thread From: Paul Eggleton @ 2013-06-25 10:46 UTC (permalink / raw) To: varun bhatnagar; +Cc: yocto On Sunday 23 June 2013 00:34:17 varun bhatnagar wrote: > I am trying to compile my code using yocto. For that I have created two > layers: "meta-networking" and "meta-oe". I have added these dependencies in > bblayer.conf too. But these are not getting build. Can anyone please tell > me what should I do to make this work. > > // > Varun > > ---------- > From: *Gary Thomas* <gary@mlbassoc.com> > Date: Mon, Jun 17, 2013 at 11:03 PM > To: yocto@yoctoproject.org > > > More details are needed to be able to help. > > What do you mean "not getting built"? Do you mean that if you > try to build recipe XYZ which is in one of those layers that it's > not being built? Or perhaps you mean something else? > > What do you mean "created two layers: ..."? Did you just extract > these from meta-openembedded? or something else? > > > I am building one of my application using yocto by giving bitbake -k > > core-image-minimal command but I am facing some errors as this application > > requires two libraries > > *1) net-snmp* > > *2) fuse* > > * > > > > * > > I have one link where in they are asking to add these two libraries in the > > form of layers and then execute bitbake -k core-image-minimal command. > > > > I am pasting one screenshot below: > > > > As you can I have added two layers meta-networking (contains net-snmp) and > > meta-oe(contains fuse). After this I added these layers in > > *build/conf/bblayer.conf.* > > * > > * > > * > > > > * > > After this I again executed bitbake -k core-image-minimal command but I > > faced the same error as before... :( > > Is there anyway that these layers get recognized? Do I need to execute > > some other command? > > Obviously, this is a recipe that you made. > > Does it show these dependencies? e.g. a line like this in your recipe file: > DEPENDS = "net-snmp fuse" > (or whatever the *packages* that you need are) > > Bitbake can't read your mind; it will only build the recipes you ask and the > dependencies which are explicitly specified in that build chain. > > If you still have trouble, try sending your recipe (.bb file and all other > components you might have), bblayers.conf, etc to the list because we're not > mind readers either :-) > > > On Tue, Jun 18, 2013 at 2:32 AM, Sudhangathan B S > > <sudhangathan@gmail.com<mailto:> > > sudhangathan@gmail.com**>> wrote: > > Can you please paste your command and it's output here..! If you don't > > > > mind..!! Or explain with equivalent clarity. It > > > > l will good if you can also put in your directory structure. > > > > ------------------------------**--- > > Sudhangathan BS > > Ph:(+91) 9731-905-205 > > ------------------------------**--- > > > > > > On Mon, Jun 17, 2013 at 11:33 PM, varun bhatnagar < > > > > varun292006@gmail.com <mailto:varun292006@gmail.com>**> wrote: > > Actually the package which I am building is having some > > > > dependencies on some libraries. So I provided those libraries with the > > help of creating layers. I did not extract those from meta-openembedded, > > instead, I manually created two layers and added them in bblayer.conf file. Rather than creating these layers from scratch (which I think is the most likely source of the problem) I'd suggest starting by cloning the original meta-openembedded repository and building your recipe with the meta-networking and meta-oe layers enabled in your bblayers.conf file. Cheers, Paul -- Paul Eggleton Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-25 10:46 ` Paul Eggleton @ 2013-06-25 19:04 ` varun bhatnagar 2013-06-25 19:13 ` Saul Wold 0 siblings, 1 reply; 16+ messages in thread From: varun bhatnagar @ 2013-06-25 19:04 UTC (permalink / raw) To: Paul Eggleton, yocto [-- Attachment #1: Type: text/plain, Size: 4170 bytes --] Thanks a ton for the reply Paul.... :) But how to clone the meta-openembedded repository. I am not very clear on the suggestion given by you. :( Can you please provide some steps on how to do this (cloning open-embedded repository). // Varun On Tue, Jun 25, 2013 at 4:16 PM, Paul Eggleton < paul.eggleton@linux.intel.com> wrote: > On Sunday 23 June 2013 00:34:17 varun bhatnagar wrote: > > I am trying to compile my code using yocto. For that I have created two > > layers: "meta-networking" and "meta-oe". I have added these dependencies > in > > bblayer.conf too. But these are not getting build. Can anyone please tell > > me what should I do to make this work. > > > > // > > Varun > > > > ---------- > > From: *Gary Thomas* <gary@mlbassoc.com> > > Date: Mon, Jun 17, 2013 at 11:03 PM > > To: yocto@yoctoproject.org > > > > > > More details are needed to be able to help. > > > > What do you mean "not getting built"? Do you mean that if you > > try to build recipe XYZ which is in one of those layers that it's > > not being built? Or perhaps you mean something else? > > > > What do you mean "created two layers: ..."? Did you just extract > > these from meta-openembedded? or something else? > > > > > I am building one of my application using yocto by giving bitbake -k > > > core-image-minimal command but I am facing some errors as this > application > > > requires two libraries > > > *1) net-snmp* > > > *2) fuse* > > > * > > > > > > * > > > I have one link where in they are asking to add these two libraries in > the > > > form of layers and then execute bitbake -k core-image-minimal command. > > > > > > I am pasting one screenshot below: > > > > > > As you can I have added two layers meta-networking (contains net-snmp) > and > > > meta-oe(contains fuse). After this I added these layers in > > > *build/conf/bblayer.conf.* > > > * > > > * > > > * > > > > > > * > > > After this I again executed bitbake -k core-image-minimal command but I > > > faced the same error as before... :( > > > Is there anyway that these layers get recognized? Do I need to execute > > > some other command? > > > > Obviously, this is a recipe that you made. > > > > Does it show these dependencies? e.g. a line like this in your recipe > file: > > DEPENDS = "net-snmp fuse" > > (or whatever the *packages* that you need are) > > > > Bitbake can't read your mind; it will only build the recipes you ask and > the > > dependencies which are explicitly specified in that build chain. > > > > If you still have trouble, try sending your recipe (.bb file and all > other > > components you might have), bblayers.conf, etc to the list because we're > not > > mind readers either :-) > > > > > On Tue, Jun 18, 2013 at 2:32 AM, Sudhangathan B S > > > <sudhangathan@gmail.com<mailto:> > > > sudhangathan@gmail.com**>> wrote: > > > Can you please paste your command and it's output here..! If you > don't > > > > > > mind..!! Or explain with equivalent clarity. It > > > > > > l will good if you can also put in your directory structure. > > > > > > ------------------------------**--- > > > Sudhangathan BS > > > Ph:(+91) 9731-905-205 > > > ------------------------------**--- > > > > > > > > > On Mon, Jun 17, 2013 at 11:33 PM, varun bhatnagar < > > > > > > varun292006@gmail.com <mailto:varun292006@gmail.com>**> wrote: > > > Actually the package which I am building is having some > > > > > > dependencies on some libraries. So I provided those libraries with the > > > help of creating layers. I did not extract those from > meta-openembedded, > > > instead, I manually created two layers and added them in bblayer.conf > file. > > Rather than creating these layers from scratch (which I think is the most > likely source of the problem) I'd suggest starting by cloning the original > meta-openembedded repository and building your recipe with the > meta-networking > and meta-oe layers enabled in your bblayers.conf file. > > Cheers, > Paul > > -- > > Paul Eggleton > Intel Open Source Technology Centre > [-- Attachment #2: Type: text/html, Size: 5669 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-25 19:04 ` varun bhatnagar @ 2013-06-25 19:13 ` Saul Wold 2013-06-27 17:58 ` varun bhatnagar 0 siblings, 1 reply; 16+ messages in thread From: Saul Wold @ 2013-06-25 19:13 UTC (permalink / raw) To: varun bhatnagar; +Cc: Paul Eggleton, yocto On 06/25/2013 12:04 PM, varun bhatnagar wrote: > Thanks a ton for the reply Paul.... :) > But how to clone the meta-openembedded repository. I am not very clear > on the suggestion given by you. :( > Can you please provide some steps on how to do this (cloning > open-embedded repository). > Paul is suggesting that you use the git tools to clone the repo. you can get man pages for git, but the summary is: git clone git://git.openembedded.org/meta-openembedded in the poky directory, this will bring everything you need. Sau! > // > Varun > > > On Tue, Jun 25, 2013 at 4:16 PM, Paul Eggleton > <paul.eggleton@linux.intel.com <mailto:paul.eggleton@linux.intel.com>> > wrote: > > On Sunday 23 June 2013 00:34:17 varun bhatnagar wrote: > > I am trying to compile my code using yocto. For that I have > created two > > layers: "meta-networking" and "meta-oe". I have added these > dependencies in > > bblayer.conf too. But these are not getting build. Can anyone > please tell > > me what should I do to make this work. > > > > // > > Varun > > > > ---------- > > From: *Gary Thomas* <gary@mlbassoc.com <mailto:gary@mlbassoc.com>> > > Date: Mon, Jun 17, 2013 at 11:03 PM > > To: yocto@yoctoproject.org <mailto:yocto@yoctoproject.org> > > > > > > More details are needed to be able to help. > > > > What do you mean "not getting built"? Do you mean that if you > > try to build recipe XYZ which is in one of those layers that it's > > not being built? Or perhaps you mean something else? > > > > What do you mean "created two layers: ..."? Did you just extract > > these from meta-openembedded? or something else? > > > > > I am building one of my application using yocto by giving > bitbake -k > > > core-image-minimal command but I am facing some errors as this > application > > > requires two libraries > > > *1) net-snmp* > > > *2) fuse* > > > * > > > > > > * > > > I have one link where in they are asking to add these two > libraries in the > > > form of layers and then execute bitbake -k core-image-minimal > command. > > > > > > I am pasting one screenshot below: > > > > > > As you can I have added two layers meta-networking (contains > net-snmp) and > > > meta-oe(contains fuse). After this I added these layers in > > > *build/conf/bblayer.conf.* > > > * > > > * > > > * > > > > > > * > > > After this I again executed bitbake -k core-image-minimal > command but I > > > faced the same error as before... :( > > > Is there anyway that these layers get recognized? Do I need to > execute > > > some other command? > > > > Obviously, this is a recipe that you made. > > > > Does it show these dependencies? e.g. a line like this in your > recipe file: > > DEPENDS = "net-snmp fuse" > > (or whatever the *packages* that you need are) > > > > Bitbake can't read your mind; it will only build the recipes you > ask and the > > dependencies which are explicitly specified in that build chain. > > > > If you still have trouble, try sending your recipe (.bb file and > all other > > components you might have), bblayers.conf, etc to the list > because we're not > > mind readers either :-) > > > > > On Tue, Jun 18, 2013 at 2:32 AM, Sudhangathan B S > > > <sudhangathan@gmail.com <mailto:sudhangathan@gmail.com><mailto:> > > > sudhangathan@gmail.com <mailto:sudhangathan@gmail.com>**>> wrote: > > > Can you please paste your command and it's output here..! > If you don't > > > > > > mind..!! Or explain with equivalent clarity. It > > > > > > l will good if you can also put in your directory structure. > > > > > > ------------------------------**--- > > > Sudhangathan BS > > > Ph:(+91) 9731-905-205 > > > ------------------------------**--- > > > > > > > > > On Mon, Jun 17, 2013 at 11:33 PM, varun bhatnagar < > > > > > > varun292006@gmail.com <mailto:varun292006@gmail.com> > <mailto:varun292006@gmail.com <mailto:varun292006@gmail.com>>**> wrote: > > > Actually the package which I am building is having some > > > > > > dependencies on some libraries. So I provided those libraries > with the > > > help of creating layers. I did not extract those from > meta-openembedded, > > > instead, I manually created two layers and added them in > bblayer.conf file. > > Rather than creating these layers from scratch (which I think is the > most > likely source of the problem) I'd suggest starting by cloning the > original > meta-openembedded repository and building your recipe with the > meta-networking > and meta-oe layers enabled in your bblayers.conf file. > > Cheers, > Paul > > -- > > Paul Eggleton > Intel Open Source Technology Centre > > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-25 19:13 ` Saul Wold @ 2013-06-27 17:58 ` varun bhatnagar 2013-06-27 20:25 ` Paul Eggleton 0 siblings, 1 reply; 16+ messages in thread From: varun bhatnagar @ 2013-06-27 17:58 UTC (permalink / raw) To: Saul Wold, yocto [-- Attachment #1: Type: text/plain, Size: 1162 bytes --] Thanks a ton Paul and Saul for the reply. Your suggestion worked. :) But after building my recipe file I executed bitbake -k core-image-minimal and I got the following error: NOTE: Resolving any missing task queue dependencies Missing or unbuildable dependency chain was: ['app-ea'] ERROR: Nothing RPROVIDES 'app-ea' (but /local/varun/poky-yocto-1.4-m3/meta/recipes-core/images/ core-image-minimal.bb RDEPENDS on or otherwise requires it) NOTE: Runtime target 'com-ea' is unbuildable, removing... Missing or unbuildable dependency chain was: ['test-ea'] ERROR: Nothing RPROVIDES 'tipcutils' (but /local/varun/poky-yocto-1.4-m3/meta/recipes-core/images/ core-image-minimal.bb RDEPENDS on or otherwise requires it) NOTE: Runtime target 'tipcutils' is unbuildable, removing... Missing or unbuildable dependency chain was: ['tipcutils'] NOTE: Preparing runqueue ERROR: All buildable tasks have been run but the build is incomplete (--continue mode). Errors for the tasks that failed will have been printed above. Summary: There were 3 ERROR messages shown, returning a non-zero exit code. Any idea how to resolve this one? // Varun [-- Attachment #2: Type: text/html, Size: 1996 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-27 17:58 ` varun bhatnagar @ 2013-06-27 20:25 ` Paul Eggleton 2013-06-29 18:35 ` varun bhatnagar 0 siblings, 1 reply; 16+ messages in thread From: Paul Eggleton @ 2013-06-27 20:25 UTC (permalink / raw) To: varun bhatnagar; +Cc: yocto On Thursday 27 June 2013 23:28:05 varun bhatnagar wrote: > Thanks a ton Paul and Saul for the reply. Your suggestion worked. :) > But after building my recipe file I executed bitbake -k core-image-minimal > and I got the following error: > > NOTE: Resolving any missing task queue dependencies > Missing or unbuildable dependency chain was: ['app-ea'] > ERROR: Nothing RPROVIDES 'app-ea' (but > /local/varun/poky-yocto-1.4-m3/meta/recipes-core/images/ > core-image-minimal.bb RDEPENDS on or otherwise requires it) > NOTE: Runtime target 'com-ea' is unbuildable, removing... > Missing or unbuildable dependency chain was: ['test-ea'] > ERROR: Nothing RPROVIDES 'tipcutils' (but > /local/varun/poky-yocto-1.4-m3/meta/recipes-core/images/ > core-image-minimal.bb RDEPENDS on or otherwise requires it) > NOTE: Runtime target 'tipcutils' is unbuildable, removing... > Missing or unbuildable dependency chain was: ['tipcutils'] > NOTE: Preparing runqueue > ERROR: All buildable tasks have been run but the build is incomplete > (--continue mode). Errors for the tasks that failed will have been printed > above. > > Summary: There were 3 ERROR messages shown, returning a non-zero exit code. > > > Any idea how to resolve this one? None of "com-ea", "test-ea" or "tipcutils" are normally in core-image-minimal nor are they in any OE layer that I am aware of. I can only suggest that you might have added these to CORE_IMAGE_EXTRA_INSTALL, is that correct? If so, either remove these or ensure they actually exist somewhere in an enabled layer where that layer has BBFILES correctly set up in its conf/layer.conf file to match the directory structure of the layer. Cheers, Paul -- Paul Eggleton Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-27 20:25 ` Paul Eggleton @ 2013-06-29 18:35 ` varun bhatnagar 2013-07-01 9:48 ` Paul Eggleton 0 siblings, 1 reply; 16+ messages in thread From: varun bhatnagar @ 2013-06-29 18:35 UTC (permalink / raw) To: Paul Eggleton, yocto [-- Attachment #1: Type: text/plain, Size: 2404 bytes --] Yes Paul that was the entry was there in CORE_IMAGE_EXTRA_INSTALL. I have removed it from there but I need to add the command provided by these packages in my image. So I have added one line in my layer.conf file "IMAGE_INSTALL_append= test-ea ". Now if I try to run bitbake -k core-image-minimal, it gives me a message saying "Nothing provides test-ea". What shall I do? (I have build the recipe file of test-ea without any error.) On Fri, Jun 28, 2013 at 1:55 AM, Paul Eggleton < paul.eggleton@linux.intel.com> wrote: > On Thursday 27 June 2013 23:28:05 varun bhatnagar wrote: > > Thanks a ton Paul and Saul for the reply. Your suggestion worked. :) > > But after building my recipe file I executed bitbake -k > core-image-minimal > > and I got the following error: > > > > NOTE: Resolving any missing task queue dependencies > > Missing or unbuildable dependency chain was: ['app-ea'] > > ERROR: Nothing RPROVIDES 'app-ea' (but > > /local/varun/poky-yocto-1.4-m3/meta/recipes-core/images/ > > core-image-minimal.bb RDEPENDS on or otherwise requires it) > > NOTE: Runtime target 'com-ea' is unbuildable, removing... > > Missing or unbuildable dependency chain was: ['test-ea'] > > ERROR: Nothing RPROVIDES 'tipcutils' (but > > /local/varun/poky-yocto-1.4-m3/meta/recipes-core/images/ > > core-image-minimal.bb RDEPENDS on or otherwise requires it) > > NOTE: Runtime target 'tipcutils' is unbuildable, removing... > > Missing or unbuildable dependency chain was: ['tipcutils'] > > NOTE: Preparing runqueue > > ERROR: All buildable tasks have been run but the build is incomplete > > (--continue mode). Errors for the tasks that failed will have been > printed > > above. > > > > Summary: There were 3 ERROR messages shown, returning a non-zero exit > code. > > > > > > Any idea how to resolve this one? > > None of "com-ea", "test-ea" or "tipcutils" are normally in > core-image-minimal > nor are they in any OE layer that I am aware of. I can only suggest that > you > might have added these to CORE_IMAGE_EXTRA_INSTALL, is that correct? If so, > either remove these or ensure they actually exist somewhere in an enabled > layer where that layer has BBFILES correctly set up in its conf/layer.conf > file > to match the directory structure of the layer. > > Cheers, > Paul > > -- > > Paul Eggleton > Intel Open Source Technology Centre > [-- Attachment #2: Type: text/html, Size: 3162 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-06-29 18:35 ` varun bhatnagar @ 2013-07-01 9:48 ` Paul Eggleton 2013-07-12 18:23 ` varun bhatnagar 0 siblings, 1 reply; 16+ messages in thread From: Paul Eggleton @ 2013-07-01 9:48 UTC (permalink / raw) To: varun bhatnagar; +Cc: yocto On Sunday 30 June 2013 00:05:58 varun bhatnagar wrote: > Yes Paul that was the entry was there in CORE_IMAGE_EXTRA_INSTALL. I have > removed it from there but I need to add the command provided by these > packages in my image. So I have added one line in my layer.conf file > "IMAGE_INSTALL_append= test-ea ". Now if I try to run bitbake -k > core-image-minimal, it gives me a message saying "Nothing provides > test-ea". What shall I do? (I have build the recipe file of test-ea without > any error.) Can you show me what the test-ea recipe contains? Cheers, Paul -- Paul Eggleton Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Yocto Layers not getting recognized by bitbake 2013-07-01 9:48 ` Paul Eggleton @ 2013-07-12 18:23 ` varun bhatnagar 0 siblings, 0 replies; 16+ messages in thread From: varun bhatnagar @ 2013-07-12 18:23 UTC (permalink / raw) To: Paul Eggleton, yocto [-- Attachment #1: Type: text/plain, Size: 1709 bytes --] Hi Paul, I am pasting the content of my recipe file below, please have a look at it. DESCRIPTION = "bitake file" *DEPENDS = "net-snmp fuse"* RDEPENDS = "curl rpm openssh openldap procps psmisc sed net-snmp-server" LICENSE = "GPLv2+" PR = "r0" SRC_URI = "*file:///home/user/Myapp.tar.gz"*<file:///home/user/Myapp.tar.gz%22> ; EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH=${STAGING_DIR_HOST} " EXTRA_OECMAKE += "-DTARGET_ARCHITECTURE=${TARGET_ARCH} " EXTRA_OECMAKE += "-DCMAKE_SYSTEM_NAME=Linux " EXTRA_OECMAKE += "-DCMAKE_SYSTEM_VERSION=1 " EXTRA_OECMAKE += "-DRSTATE=${PR} " EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM=NEVER " EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY " EXTRA_OECMAKE += "-DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY " EXTRA_OECMAKE += "-DRPM=1 " inherit cmake do_configure(){ cmake ..${EXTRA_OECMAKE} } do_compile(){ oe_runmake all } // Varun On Mon, Jul 1, 2013 at 3:18 PM, Paul Eggleton <paul.eggleton@linux.intel.com > wrote: > On Sunday 30 June 2013 00:05:58 varun bhatnagar wrote: > > Yes Paul that was the entry was there in CORE_IMAGE_EXTRA_INSTALL. I have > > removed it from there but I need to add the command provided by these > > packages in my image. So I have added one line in my layer.conf file > > "IMAGE_INSTALL_append= test-ea ". Now if I try to run bitbake -k > > core-image-minimal, it gives me a message saying "Nothing provides > > test-ea". What shall I do? (I have build the recipe file of test-ea > without > > any error.) > > Can you show me what the test-ea recipe contains? > > Cheers, > Paul > > -- > > Paul Eggleton > Intel Open Source Technology Centre > [-- Attachment #2: Type: text/html, Size: 5670 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2013-07-12 18:23 UTC | newest] Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-06-17 17:08 Yocto Layers not getting recognized by bitbake varun bhatnagar 2013-06-17 17:33 ` Gary Thomas 2013-06-17 18:03 ` varun bhatnagar 2013-06-17 21:02 ` Sudhangathan B S 2013-06-18 16:28 ` varun bhatnagar 2013-06-18 16:41 ` Gary Thomas 2013-06-19 16:10 ` varun bhatnagar 2013-06-22 19:04 ` varun bhatnagar 2013-06-25 10:46 ` Paul Eggleton 2013-06-25 19:04 ` varun bhatnagar 2013-06-25 19:13 ` Saul Wold 2013-06-27 17:58 ` varun bhatnagar 2013-06-27 20:25 ` Paul Eggleton 2013-06-29 18:35 ` varun bhatnagar 2013-07-01 9:48 ` Paul Eggleton 2013-07-12 18:23 ` varun bhatnagar
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.