* request for i.MX8MM Venice test
@ 2021-03-07 2:10 Marek Behun
2021-03-08 16:47 ` Tim Harvey
0 siblings, 1 reply; 7+ messages in thread
From: Marek Behun @ 2021-03-07 2:10 UTC (permalink / raw)
To: u-boot
[sorry for the spam, I accidentally sent this e-mail from my personal
address]
Hello Tim,
you are listed as maintainer of i.MX8MM Venice board in U-Boot.
I am currently working on LTO support for U-Boot, and I have
encountered a problem with i.MX8MM Venice board:
when LTO is enabled, the linking process for SPL does not throw away
relocation information, making the resulting SPL image too big for that
board.
I have added a patch that discards symbols from .rela* section to my
patch series, but I would like you to test whether the patch series
works for your board and does not break anything.
Could you please clone https://github.com/elkablo/u-boot branch lto,
build for imx8mm_venice_defconfig and test whether it boots on your
board and maybe test some U-Boot commands (disk reads, kernel
booting, ...)? If it does not work, could you also please check with
current U-Boot master, to see if it got broken with my patches or with
something different?
Thank you.
Marek
^ permalink raw reply [flat|nested] 7+ messages in thread
* request for i.MX8MM Venice test
2021-03-07 2:10 request for i.MX8MM Venice test Marek Behun
@ 2021-03-08 16:47 ` Tim Harvey
2021-03-08 20:35 ` Tim Harvey
0 siblings, 1 reply; 7+ messages in thread
From: Tim Harvey @ 2021-03-08 16:47 UTC (permalink / raw)
To: u-boot
On Sat, Mar 6, 2021 at 6:10 PM Marek Behun <marek.behun@nic.cz> wrote:
>
> [sorry for the spam, I accidentally sent this e-mail from my personal
> address]
>
> Hello Tim,
>
> you are listed as maintainer of i.MX8MM Venice board in U-Boot.
>
> I am currently working on LTO support for U-Boot, and I have
> encountered a problem with i.MX8MM Venice board:
> when LTO is enabled, the linking process for SPL does not throw away
> relocation information, making the resulting SPL image too big for that
> board.
>
> I have added a patch that discards symbols from .rela* section to my
> patch series, but I would like you to test whether the patch series
> works for your board and does not break anything.
>
> Could you please clone https://github.com/elkablo/u-boot branch lto,
> build for imx8mm_venice_defconfig and test whether it boots on your
> board and maybe test some U-Boot commands (disk reads, kernel
> booting, ...)? If it does not work, could you also please check with
> current U-Boot master, to see if it got broken with my patches or with
> something different?
>
Marek,
Your lto branch does not boot - I don't get anything after the SPL
banner. U-Boot master shows the same problem so some regression has
taken place.
There should be several other IMX8 boards using SPL that show the same
issue I would think?
I will have to bisect to find the breakage.
Best regards,
Tim
^ permalink raw reply [flat|nested] 7+ messages in thread
* request for i.MX8MM Venice test
2021-03-08 16:47 ` Tim Harvey
@ 2021-03-08 20:35 ` Tim Harvey
2021-03-08 20:42 ` Adam Ford
0 siblings, 1 reply; 7+ messages in thread
From: Tim Harvey @ 2021-03-08 20:35 UTC (permalink / raw)
To: u-boot
On Mon, Mar 8, 2021 at 8:47 AM Tim Harvey <tharvey@gateworks.com> wrote:
>
> On Sat, Mar 6, 2021 at 6:10 PM Marek Behun <marek.behun@nic.cz> wrote:
> >
> > [sorry for the spam, I accidentally sent this e-mail from my personal
> > address]
> >
> > Hello Tim,
> >
> > you are listed as maintainer of i.MX8MM Venice board in U-Boot.
> >
> > I am currently working on LTO support for U-Boot, and I have
> > encountered a problem with i.MX8MM Venice board:
> > when LTO is enabled, the linking process for SPL does not throw away
> > relocation information, making the resulting SPL image too big for that
> > board.
> >
> > I have added a patch that discards symbols from .rela* section to my
> > patch series, but I would like you to test whether the patch series
> > works for your board and does not break anything.
> >
> > Could you please clone https://github.com/elkablo/u-boot branch lto,
> > build for imx8mm_venice_defconfig and test whether it boots on your
> > board and maybe test some U-Boot commands (disk reads, kernel
> > booting, ...)? If it does not work, could you also please check with
> > current U-Boot master, to see if it got broken with my patches or with
> > something different?
> >
>
> Marek,
>
> Your lto branch does not boot - I don't get anything after the SPL
> banner. U-Boot master shows the same problem so some regression has
> taken place.
>
> There should be several other IMX8 boards using SPL that show the same
> issue I would think?
>
> I will have to bisect to find the breakage.
>
Marek,
My testing may be flawed as I'm having issues with even the branches I
submitted to add my board (which I previously tested without issues).
I'm not sure if I'm having a compiler related issue or something else.
Perhaps there is another IMX8 SPL user out there that can test with
your patches while I figure out what's wrong on my end?
Tim
^ permalink raw reply [flat|nested] 7+ messages in thread
* request for i.MX8MM Venice test
2021-03-08 20:35 ` Tim Harvey
@ 2021-03-08 20:42 ` Adam Ford
2021-03-08 21:57 ` Tim Harvey
0 siblings, 1 reply; 7+ messages in thread
From: Adam Ford @ 2021-03-08 20:42 UTC (permalink / raw)
To: u-boot
On Mon, Mar 8, 2021 at 2:35 PM Tim Harvey <tharvey@gateworks.com> wrote:
>
> On Mon, Mar 8, 2021 at 8:47 AM Tim Harvey <tharvey@gateworks.com> wrote:
> >
> > On Sat, Mar 6, 2021 at 6:10 PM Marek Behun <marek.behun@nic.cz> wrote:
> > >
> > > [sorry for the spam, I accidentally sent this e-mail from my personal
> > > address]
> > >
> > > Hello Tim,
> > >
> > > you are listed as maintainer of i.MX8MM Venice board in U-Boot.
> > >
> > > I am currently working on LTO support for U-Boot, and I have
> > > encountered a problem with i.MX8MM Venice board:
> > > when LTO is enabled, the linking process for SPL does not throw away
> > > relocation information, making the resulting SPL image too big for that
> > > board.
> > >
> > > I have added a patch that discards symbols from .rela* section to my
> > > patch series, but I would like you to test whether the patch series
> > > works for your board and does not break anything.
> > >
> > > Could you please clone https://github.com/elkablo/u-boot branch lto,
> > > build for imx8mm_venice_defconfig and test whether it boots on your
> > > board and maybe test some U-Boot commands (disk reads, kernel
> > > booting, ...)? If it does not work, could you also please check with
> > > current U-Boot master, to see if it got broken with my patches or with
> > > something different?
> > >
> >
> > Marek,
> >
> > Your lto branch does not boot - I don't get anything after the SPL
> > banner. U-Boot master shows the same problem so some regression has
> > taken place.
> >
> > There should be several other IMX8 boards using SPL that show the same
> > issue I would think?
> >
> > I will have to bisect to find the breakage.
> >
>
> Marek,
>
> My testing may be flawed as I'm having issues with even the branches I
> submitted to add my board (which I previously tested without issues).
> I'm not sure if I'm having a compiler related issue or something else.
>
> Perhaps there is another IMX8 SPL user out there that can test with
> your patches while I figure out what's wrong on my end?
I have tested and booted an i.MX8M Nano with a slightly older revision
of Marek's git repo. I wrongly assumed that the Mini and Nano were
close enough to not warrant testing on the mini, but based on what I'm
hearing, I will test the Beacon i.mx8mm board. I can try to do that
sometime later this week.
adam
>
> Tim
^ permalink raw reply [flat|nested] 7+ messages in thread
* request for i.MX8MM Venice test
2021-03-08 20:42 ` Adam Ford
@ 2021-03-08 21:57 ` Tim Harvey
2021-03-08 22:19 ` Adam Ford
0 siblings, 1 reply; 7+ messages in thread
From: Tim Harvey @ 2021-03-08 21:57 UTC (permalink / raw)
To: u-boot
On Mon, Mar 8, 2021 at 12:43 PM Adam Ford <aford173@gmail.com> wrote:
>
> On Mon, Mar 8, 2021 at 2:35 PM Tim Harvey <tharvey@gateworks.com> wrote:
> >
> > On Mon, Mar 8, 2021 at 8:47 AM Tim Harvey <tharvey@gateworks.com> wrote:
> > >
> > > On Sat, Mar 6, 2021 at 6:10 PM Marek Behun <marek.behun@nic.cz> wrote:
> > > >
> > > > [sorry for the spam, I accidentally sent this e-mail from my personal
> > > > address]
> > > >
> > > > Hello Tim,
> > > >
> > > > you are listed as maintainer of i.MX8MM Venice board in U-Boot.
> > > >
> > > > I am currently working on LTO support for U-Boot, and I have
> > > > encountered a problem with i.MX8MM Venice board:
> > > > when LTO is enabled, the linking process for SPL does not throw away
> > > > relocation information, making the resulting SPL image too big for that
> > > > board.
> > > >
> > > > I have added a patch that discards symbols from .rela* section to my
> > > > patch series, but I would like you to test whether the patch series
> > > > works for your board and does not break anything.
> > > >
> > > > Could you please clone https://github.com/elkablo/u-boot branch lto,
> > > > build for imx8mm_venice_defconfig and test whether it boots on your
> > > > board and maybe test some U-Boot commands (disk reads, kernel
> > > > booting, ...)? If it does not work, could you also please check with
> > > > current U-Boot master, to see if it got broken with my patches or with
> > > > something different?
> > > >
> > >
> > > Marek,
> > >
> > > Your lto branch does not boot - I don't get anything after the SPL
> > > banner. U-Boot master shows the same problem so some regression has
> > > taken place.
> > >
> > > There should be several other IMX8 boards using SPL that show the same
> > > issue I would think?
> > >
> > > I will have to bisect to find the breakage.
> > >
> >
> > Marek,
> >
> > My testing may be flawed as I'm having issues with even the branches I
> > submitted to add my board (which I previously tested without issues).
> > I'm not sure if I'm having a compiler related issue or something else.
> >
> > Perhaps there is another IMX8 SPL user out there that can test with
> > your patches while I figure out what's wrong on my end?
>
> I have tested and booted an i.MX8M Nano with a slightly older revision
> of Marek's git repo. I wrongly assumed that the Mini and Nano were
> close enough to not warrant testing on the mini, but based on what I'm
> hearing, I will test the Beacon i.mx8mm board. I can try to do that
> sometime later this week.
>
Marek / Adam,
I found the issues with my board, got them resolved, and was able to
test the lto branch and it appears to work just fine with
imx8mm-venice SPL.
Best regards,
Tim
^ permalink raw reply [flat|nested] 7+ messages in thread
* request for i.MX8MM Venice test
2021-03-08 21:57 ` Tim Harvey
@ 2021-03-08 22:19 ` Adam Ford
0 siblings, 0 replies; 7+ messages in thread
From: Adam Ford @ 2021-03-08 22:19 UTC (permalink / raw)
To: u-boot
On Mon, Mar 8, 2021 at 3:57 PM Tim Harvey <tharvey@gateworks.com> wrote:
>
> On Mon, Mar 8, 2021 at 12:43 PM Adam Ford <aford173@gmail.com> wrote:
> >
> > On Mon, Mar 8, 2021 at 2:35 PM Tim Harvey <tharvey@gateworks.com> wrote:
> > >
> > > On Mon, Mar 8, 2021 at 8:47 AM Tim Harvey <tharvey@gateworks.com> wrote:
> > > >
> > > > On Sat, Mar 6, 2021 at 6:10 PM Marek Behun <marek.behun@nic.cz> wrote:
> > > > >
> > > > > [sorry for the spam, I accidentally sent this e-mail from my personal
> > > > > address]
> > > > >
> > > > > Hello Tim,
> > > > >
> > > > > you are listed as maintainer of i.MX8MM Venice board in U-Boot.
> > > > >
> > > > > I am currently working on LTO support for U-Boot, and I have
> > > > > encountered a problem with i.MX8MM Venice board:
> > > > > when LTO is enabled, the linking process for SPL does not throw away
> > > > > relocation information, making the resulting SPL image too big for that
> > > > > board.
> > > > >
> > > > > I have added a patch that discards symbols from .rela* section to my
> > > > > patch series, but I would like you to test whether the patch series
> > > > > works for your board and does not break anything.
> > > > >
> > > > > Could you please clone https://github.com/elkablo/u-boot branch lto,
> > > > > build for imx8mm_venice_defconfig and test whether it boots on your
> > > > > board and maybe test some U-Boot commands (disk reads, kernel
> > > > > booting, ...)? If it does not work, could you also please check with
> > > > > current U-Boot master, to see if it got broken with my patches or with
> > > > > something different?
> > > > >
> > > >
> > > > Marek,
> > > >
> > > > Your lto branch does not boot - I don't get anything after the SPL
> > > > banner. U-Boot master shows the same problem so some regression has
> > > > taken place.
> > > >
> > > > There should be several other IMX8 boards using SPL that show the same
> > > > issue I would think?
> > > >
> > > > I will have to bisect to find the breakage.
> > > >
> > >
> > > Marek,
> > >
> > > My testing may be flawed as I'm having issues with even the branches I
> > > submitted to add my board (which I previously tested without issues).
> > > I'm not sure if I'm having a compiler related issue or something else.
> > >
> > > Perhaps there is another IMX8 SPL user out there that can test with
> > > your patches while I figure out what's wrong on my end?
> >
> > I have tested and booted an i.MX8M Nano with a slightly older revision
> > of Marek's git repo. I wrongly assumed that the Mini and Nano were
> > close enough to not warrant testing on the mini, but based on what I'm
> > hearing, I will test the Beacon i.mx8mm board. I can try to do that
> > sometime later this week.
> >
>
> Marek / Adam,
>
> I found the issues with my board, got them resolved, and was able to
> test the lto branch and it appears to work just fine with
> imx8mm-venice SPL.
Tim,
That's good news.
Marek,
Go ahead and add imx8mm_beacon to the list of tested devices as well.
adam
>
> Best regards,
>
> Tim
^ permalink raw reply [flat|nested] 7+ messages in thread
* request for i.MX8MM Venice test
@ 2021-03-07 0:59 Marek Behun
0 siblings, 0 replies; 7+ messages in thread
From: Marek Behun @ 2021-03-07 0:59 UTC (permalink / raw)
To: u-boot
Hello Tim,
you are listed as maintainer of i.MX8MM Venice board in U-Boot.
I am currently working on LTO support for U-Boot, and I have
encountered a problem with i.MX8MM Venice board:
when LTO is enabled, the linking process for SPL does not throw away
relocation information, making the resulting SPL image too big for that
board.
I have added a patch that discards symbols from .rela* section to my
patch series, but I would like you to test whether the patch series
works for your board and does not break anything.
Could you please clone https://github.com/elkablo/u-boot branch lto,
build for imx8mm_venice_defconfig and test whether it boots on your
board and maybe test some U-Boot commands (disk reads, kernel
booting, ...)? If it does not work, could you also please check with
current U-Boot master, to see if it got broken with my patches or with
something different?
Thank you.
Marek
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-03-08 22:19 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-07 2:10 request for i.MX8MM Venice test Marek Behun
2021-03-08 16:47 ` Tim Harvey
2021-03-08 20:35 ` Tim Harvey
2021-03-08 20:42 ` Adam Ford
2021-03-08 21:57 ` Tim Harvey
2021-03-08 22:19 ` Adam Ford
-- strict thread matches above, loose matches on Subject: below --
2021-03-07 0:59 Marek Behun
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.