[PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Masahiro Yamada]

Many of clk_disable() implementations just return for NULL pointer,
but this check is missing from some.  Let's make it tree-wide
consistent.  It will allow clock consumers to call clk_disable()
without NULL pointer check.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Wan Zongshun <mcuos.com@gmail.com>
---

I came back after a long pause.
You can see the discussion about the previous version:
https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html


Changes in v3:
  - Return only when clk is NULL.  Do not take care of error pointer.

Changes in v2:
  - Rebase on Linux 4.6-rc1

 arch/arm/mach-mmp/clock.c        | 3 +++
 arch/arm/mach-w90x900/clock.c    | 3 +++
 arch/blackfin/mach-bf609/clock.c | 3 +++
 arch/m68k/coldfire/clk.c         | 4 ++++
 arch/mips/bcm63xx/clk.c          | 3 +++
 5 files changed, 16 insertions(+)

diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index ac6633d..28fe64c 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -67,6 +67,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (!clk)
+		return;
+
 	WARN_ON(clk->enabled == 0);
 
 	spin_lock_irqsave(&clocks_lock, flags);
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 2c371ff..ac6fd1a 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -46,6 +46,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (!clk)
+		return;
+
 	WARN_ON(clk->enabled == 0);
 
 	spin_lock_irqsave(&clocks_lock, flags);
diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c
index 3783058..392a59b 100644
--- a/arch/blackfin/mach-bf609/clock.c
+++ b/arch/blackfin/mach-bf609/clock.c
@@ -97,6 +97,9 @@ EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
+	if (!clk)
+		return;
+
 	if (clk->ops && clk->ops->disable)
 		clk->ops->disable(clk);
 }
diff --git a/arch/m68k/coldfire/clk.c b/arch/m68k/coldfire/clk.c
index fddfdcc..1e3c7e9 100644
--- a/arch/m68k/coldfire/clk.c
+++ b/arch/m68k/coldfire/clk.c
@@ -101,6 +101,10 @@ EXPORT_SYMBOL(clk_enable);
 void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
+
+	if (!clk)
+		return;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	if ((--clk->enabled == 0) && clk->clk_ops)
 		clk->clk_ops->disable(clk);
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 6375652..b49fc9c 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -326,6 +326,9 @@ EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
+	if (!clk)
+		return;
+
 	mutex_lock(&clocks_mutex);
 	clk_disable_unlocked(clk);
 	mutex_unlock(&clocks_mutex);
-- 
1.9.1

[PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Masahiro Yamada]

Many of clk_disable() implementations just return for NULL pointer,
but this check is missing from some.  Let's make it tree-wide
consistent.  It will allow clock consumers to call clk_disable()
without NULL pointer check.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Wan Zongshun <mcuos.com@gmail.com>
---

I came back after a long pause.
You can see the discussion about the previous version:
https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html


Changes in v3:
  - Return only when clk is NULL.  Do not take care of error pointer.

Changes in v2:
  - Rebase on Linux 4.6-rc1

 arch/arm/mach-mmp/clock.c        | 3 +++
 arch/arm/mach-w90x900/clock.c    | 3 +++
 arch/blackfin/mach-bf609/clock.c | 3 +++
 arch/m68k/coldfire/clk.c         | 4 ++++
 arch/mips/bcm63xx/clk.c          | 3 +++
 5 files changed, 16 insertions(+)

diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index ac6633d..28fe64c 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -67,6 +67,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (!clk)
+		return;
+
 	WARN_ON(clk->enabled == 0);
 
 	spin_lock_irqsave(&clocks_lock, flags);
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 2c371ff..ac6fd1a 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -46,6 +46,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (!clk)
+		return;
+
 	WARN_ON(clk->enabled == 0);
 
 	spin_lock_irqsave(&clocks_lock, flags);
diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c
index 3783058..392a59b 100644
--- a/arch/blackfin/mach-bf609/clock.c
+++ b/arch/blackfin/mach-bf609/clock.c
@@ -97,6 +97,9 @@ EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
+	if (!clk)
+		return;
+
 	if (clk->ops && clk->ops->disable)
 		clk->ops->disable(clk);
 }
diff --git a/arch/m68k/coldfire/clk.c b/arch/m68k/coldfire/clk.c
index fddfdcc..1e3c7e9 100644
--- a/arch/m68k/coldfire/clk.c
+++ b/arch/m68k/coldfire/clk.c
@@ -101,6 +101,10 @@ EXPORT_SYMBOL(clk_enable);
 void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
+
+	if (!clk)
+		return;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	if ((--clk->enabled == 0) && clk->clk_ops)
 		clk->clk_ops->disable(clk);
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 6375652..b49fc9c 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -326,6 +326,9 @@ EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
+	if (!clk)
+		return;
+
 	mutex_lock(&clocks_mutex);
 	clk_disable_unlocked(clk);
 	mutex_unlock(&clocks_mutex);
-- 
1.9.1

[PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Masahiro Yamada]

Many of clk_disable() implementations just return for NULL pointer,
but this check is missing from some.  Let's make it tree-wide
consistent.  It will allow clock consumers to call clk_disable()
without NULL pointer check.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Wan Zongshun <mcuos.com@gmail.com>
---

I came back after a long pause.
You can see the discussion about the previous version:
https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html


Changes in v3:
  - Return only when clk is NULL.  Do not take care of error pointer.

Changes in v2:
  - Rebase on Linux 4.6-rc1

 arch/arm/mach-mmp/clock.c        | 3 +++
 arch/arm/mach-w90x900/clock.c    | 3 +++
 arch/blackfin/mach-bf609/clock.c | 3 +++
 arch/m68k/coldfire/clk.c         | 4 ++++
 arch/mips/bcm63xx/clk.c          | 3 +++
 5 files changed, 16 insertions(+)

diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index ac6633d..28fe64c 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -67,6 +67,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (!clk)
+		return;
+
 	WARN_ON(clk->enabled == 0);
 
 	spin_lock_irqsave(&clocks_lock, flags);
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 2c371ff..ac6fd1a 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -46,6 +46,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (!clk)
+		return;
+
 	WARN_ON(clk->enabled == 0);
 
 	spin_lock_irqsave(&clocks_lock, flags);
diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c
index 3783058..392a59b 100644
--- a/arch/blackfin/mach-bf609/clock.c
+++ b/arch/blackfin/mach-bf609/clock.c
@@ -97,6 +97,9 @@ EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
+	if (!clk)
+		return;
+
 	if (clk->ops && clk->ops->disable)
 		clk->ops->disable(clk);
 }
diff --git a/arch/m68k/coldfire/clk.c b/arch/m68k/coldfire/clk.c
index fddfdcc..1e3c7e9 100644
--- a/arch/m68k/coldfire/clk.c
+++ b/arch/m68k/coldfire/clk.c
@@ -101,6 +101,10 @@ EXPORT_SYMBOL(clk_enable);
 void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
+
+	if (!clk)
+		return;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	if ((--clk->enabled == 0) && clk->clk_ops)
 		clk->clk_ops->disable(clk);
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 6375652..b49fc9c 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -326,6 +326,9 @@ EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
+	if (!clk)
+		return;
+
 	mutex_lock(&clocks_mutex);
 	clk_disable_unlocked(clk);
 	mutex_unlock(&clocks_mutex);
-- 
1.9.1

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Geert Uytterhoeven]

On Wed, Aug 24, 2016 at 7:26 PM, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
> Many of clk_disable() implementations just return for NULL pointer,
> but this check is missing from some.  Let's make it tree-wide
> consistent.  It will allow clock consumers to call clk_disable()
> without NULL pointer check.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Greg Ungerer <gerg@uclinux.org>
> Acked-by: Wan Zongshun <mcuos.com@gmail.com>

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Geert Uytterhoeven]

On Wed, Aug 24, 2016 at 7:26 PM, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
> Many of clk_disable() implementations just return for NULL pointer,
> but this check is missing from some.  Let's make it tree-wide
> consistent.  It will allow clock consumers to call clk_disable()
> without NULL pointer check.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Greg Ungerer <gerg@uclinux.org>
> Acked-by: Wan Zongshun <mcuos.com@gmail.com>

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Geert Uytterhoeven]

On Wed, Aug 24, 2016 at 7:26 PM, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
> Many of clk_disable() implementations just return for NULL pointer,
> but this check is missing from some.  Let's make it tree-wide
> consistent.  It will allow clock consumers to call clk_disable()
> without NULL pointer check.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Greg Ungerer <gerg@uclinux.org>
> Acked-by: Wan Zongshun <mcuos.com@gmail.com>

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Geert Uytterhoeven]

On Wed, Aug 24, 2016 at 7:26 PM, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
> Many of clk_disable() implementations just return for NULL pointer,
> but this check is missing from some.  Let's make it tree-wide
> consistent.  It will allow clock consumers to call clk_disable()
> without NULL pointer check.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Greg Ungerer <gerg@uclinux.org>
> Acked-by: Wan Zongshun <mcuos.com@gmail.com>

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Geert Uytterhoeven]

On Wed, Aug 24, 2016 at 7:26 PM, Masahiro Yamada
<yamada.masahiro@socionext.com> wrote:
> Many of clk_disable() implementations just return for NULL pointer,
> but this check is missing from some.  Let's make it tree-wide
> consistent.  It will allow clock consumers to call clk_disable()
> without NULL pointer check.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Greg Ungerer <gerg@uclinux.org>
> Acked-by: Wan Zongshun <mcuos.com@gmail.com>

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Florian Fainelli]

On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
> Many of clk_disable() implementations just return for NULL pointer,
> but this check is missing from some.  Let's make it tree-wide
> consistent.  It will allow clock consumers to call clk_disable()
> without NULL pointer check.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Greg Ungerer <gerg@uclinux.org>
> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
> ---
> 
> I came back after a long pause.
> You can see the discussion about the previous version:
> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
> 
> 
> Changes in v3:
>   - Return only when clk is NULL.  Do not take care of error pointer.
> 
> Changes in v2:
>   - Rebase on Linux 4.6-rc1
> 
>  arch/arm/mach-mmp/clock.c        | 3 +++
>  arch/arm/mach-w90x900/clock.c    | 3 +++
>  arch/blackfin/mach-bf609/clock.c | 3 +++
>  arch/m68k/coldfire/clk.c         | 4 ++++
>  arch/mips/bcm63xx/clk.c          | 3 +++

For bcm63xx:

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

[PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Florian Fainelli]

On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
> Many of clk_disable() implementations just return for NULL pointer,
> but this check is missing from some.  Let's make it tree-wide
> consistent.  It will allow clock consumers to call clk_disable()
> without NULL pointer check.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Greg Ungerer <gerg@uclinux.org>
> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
> ---
> 
> I came back after a long pause.
> You can see the discussion about the previous version:
> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
> 
> 
> Changes in v3:
>   - Return only when clk is NULL.  Do not take care of error pointer.
> 
> Changes in v2:
>   - Rebase on Linux 4.6-rc1
> 
>  arch/arm/mach-mmp/clock.c        | 3 +++
>  arch/arm/mach-w90x900/clock.c    | 3 +++
>  arch/blackfin/mach-bf609/clock.c | 3 +++
>  arch/m68k/coldfire/clk.c         | 4 ++++
>  arch/mips/bcm63xx/clk.c          | 3 +++

For bcm63xx:

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Florian Fainelli]

On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
> Many of clk_disable() implementations just return for NULL pointer,
> but this check is missing from some.  Let's make it tree-wide
> consistent.  It will allow clock consumers to call clk_disable()
> without NULL pointer check.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> Acked-by: Greg Ungerer <gerg@uclinux.org>
> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
> ---
> 
> I came back after a long pause.
> You can see the discussion about the previous version:
> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
> 
> 
> Changes in v3:
>   - Return only when clk is NULL.  Do not take care of error pointer.
> 
> Changes in v2:
>   - Rebase on Linux 4.6-rc1
> 
>  arch/arm/mach-mmp/clock.c        | 3 +++
>  arch/arm/mach-w90x900/clock.c    | 3 +++
>  arch/blackfin/mach-bf609/clock.c | 3 +++
>  arch/m68k/coldfire/clk.c         | 4 ++++
>  arch/mips/bcm63xx/clk.c          | 3 +++

For bcm63xx:

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Masahiro Yamada]

Hi Stephen, Michael,

2016-08-26 0:27 GMT+09:00 Florian Fainelli <f.fainelli@gmail.com>:
> On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
>> Many of clk_disable() implementations just return for NULL pointer,
>> but this check is missing from some.  Let's make it tree-wide
>> consistent.  It will allow clock consumers to call clk_disable()
>> without NULL pointer check.
>>
>> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
>> Acked-by: Greg Ungerer <gerg@uclinux.org>
>> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
>> ---
>>
>> I came back after a long pause.
>> You can see the discussion about the previous version:
>> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
>>
>>
>> Changes in v3:
>>   - Return only when clk is NULL.  Do not take care of error pointer.
>>
>> Changes in v2:
>>   - Rebase on Linux 4.6-rc1
>>
>>  arch/arm/mach-mmp/clock.c        | 3 +++
>>  arch/arm/mach-w90x900/clock.c    | 3 +++
>>  arch/blackfin/mach-bf609/clock.c | 3 +++
>>  arch/m68k/coldfire/clk.c         | 4 ++++
>>  arch/mips/bcm63xx/clk.c          | 3 +++
>


Gentle ping...


If you are not keen on this,
shall I split it per-arch and send to each arch subsystem?



-- 
Best Regards
Masahiro Yamada

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Masahiro Yamada]

Hi Stephen, Michael,

2016-08-26 0:27 GMT+09:00 Florian Fainelli <f.fainelli@gmail.com>:
> On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
>> Many of clk_disable() implementations just return for NULL pointer,
>> but this check is missing from some.  Let's make it tree-wide
>> consistent.  It will allow clock consumers to call clk_disable()
>> without NULL pointer check.
>>
>> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
>> Acked-by: Greg Ungerer <gerg@uclinux.org>
>> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
>> ---
>>
>> I came back after a long pause.
>> You can see the discussion about the previous version:
>> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
>>
>>
>> Changes in v3:
>>   - Return only when clk is NULL.  Do not take care of error pointer.
>>
>> Changes in v2:
>>   - Rebase on Linux 4.6-rc1
>>
>>  arch/arm/mach-mmp/clock.c        | 3 +++
>>  arch/arm/mach-w90x900/clock.c    | 3 +++
>>  arch/blackfin/mach-bf609/clock.c | 3 +++
>>  arch/m68k/coldfire/clk.c         | 4 ++++
>>  arch/mips/bcm63xx/clk.c          | 3 +++
>


Gentle ping...


If you are not keen on this,
shall I split it per-arch and send to each arch subsystem?



-- 
Best Regards
Masahiro Yamada

[PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Masahiro Yamada]

Hi Stephen, Michael,

2016-08-26 0:27 GMT+09:00 Florian Fainelli <f.fainelli@gmail.com>:
> On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
>> Many of clk_disable() implementations just return for NULL pointer,
>> but this check is missing from some.  Let's make it tree-wide
>> consistent.  It will allow clock consumers to call clk_disable()
>> without NULL pointer check.
>>
>> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
>> Acked-by: Greg Ungerer <gerg@uclinux.org>
>> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
>> ---
>>
>> I came back after a long pause.
>> You can see the discussion about the previous version:
>> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
>>
>>
>> Changes in v3:
>>   - Return only when clk is NULL.  Do not take care of error pointer.
>>
>> Changes in v2:
>>   - Rebase on Linux 4.6-rc1
>>
>>  arch/arm/mach-mmp/clock.c        | 3 +++
>>  arch/arm/mach-w90x900/clock.c    | 3 +++
>>  arch/blackfin/mach-bf609/clock.c | 3 +++
>>  arch/m68k/coldfire/clk.c         | 4 ++++
>>  arch/mips/bcm63xx/clk.c          | 3 +++
>


Gentle ping...


If you are not keen on this,
shall I split it per-arch and send to each arch subsystem?



-- 
Best Regards
Masahiro Yamada

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Masahiro Yamada]

Hi Stephen, Michael,

2016-08-26 0:27 GMT+09:00 Florian Fainelli <f.fainelli@gmail.com>:
> On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
>> Many of clk_disable() implementations just return for NULL pointer,
>> but this check is missing from some.  Let's make it tree-wide
>> consistent.  It will allow clock consumers to call clk_disable()
>> without NULL pointer check.
>>
>> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
>> Acked-by: Greg Ungerer <gerg@uclinux.org>
>> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
>> ---
>>
>> I came back after a long pause.
>> You can see the discussion about the previous version:
>> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
>>
>>
>> Changes in v3:
>>   - Return only when clk is NULL.  Do not take care of error pointer.
>>
>> Changes in v2:
>>   - Rebase on Linux 4.6-rc1
>>
>>  arch/arm/mach-mmp/clock.c        | 3 +++
>>  arch/arm/mach-w90x900/clock.c    | 3 +++
>>  arch/blackfin/mach-bf609/clock.c | 3 +++
>>  arch/m68k/coldfire/clk.c         | 4 ++++
>>  arch/mips/bcm63xx/clk.c          | 3 +++
>


Gentle ping...


If you are not keen on this,
shall I split it per-arch and send to each arch subsystem?



-- 
Best Regards
Masahiro Yamada

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Masahiro Yamada]

Hi Stephen, Michael,

2016-08-26 0:27 GMT+09:00 Florian Fainelli <f.fainelli@gmail.com>:
> On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
>> Many of clk_disable() implementations just return for NULL pointer,
>> but this check is missing from some.  Let's make it tree-wide
>> consistent.  It will allow clock consumers to call clk_disable()
>> without NULL pointer check.
>>
>> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
>> Acked-by: Greg Ungerer <gerg@uclinux.org>
>> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
>> ---
>>
>> I came back after a long pause.
>> You can see the discussion about the previous version:
>> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
>>
>>
>> Changes in v3:
>>   - Return only when clk is NULL.  Do not take care of error pointer.
>>
>> Changes in v2:
>>   - Rebase on Linux 4.6-rc1
>>
>>  arch/arm/mach-mmp/clock.c        | 3 +++
>>  arch/arm/mach-w90x900/clock.c    | 3 +++
>>  arch/blackfin/mach-bf609/clock.c | 3 +++
>>  arch/m68k/coldfire/clk.c         | 4 ++++
>>  arch/mips/bcm63xx/clk.c          | 3 +++
>


Gentle ping...


If you are not keen on this,
shall I split it per-arch and send to each arch subsystem?



-- 
Best Regards
Masahiro Yamada

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Stephen Boyd]

On 09/16, Masahiro Yamada wrote:
> Hi Stephen, Michael,
> 
> 2016-08-26 0:27 GMT+09:00 Florian Fainelli <f.fainelli@gmail.com>:
> > On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
> >> Many of clk_disable() implementations just return for NULL pointer,
> >> but this check is missing from some.  Let's make it tree-wide
> >> consistent.  It will allow clock consumers to call clk_disable()
> >> without NULL pointer check.
> >>
> >> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> >> Acked-by: Greg Ungerer <gerg@uclinux.org>
> >> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
> >> ---
> >>
> >> I came back after a long pause.
> >> You can see the discussion about the previous version:
> >> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
> >>
> >>
> >> Changes in v3:
> >>   - Return only when clk is NULL.  Do not take care of error pointer.
> >>
> >> Changes in v2:
> >>   - Rebase on Linux 4.6-rc1
> >>
> >>  arch/arm/mach-mmp/clock.c        | 3 +++
> >>  arch/arm/mach-w90x900/clock.c    | 3 +++
> >>  arch/blackfin/mach-bf609/clock.c | 3 +++
> >>  arch/m68k/coldfire/clk.c         | 4 ++++
> >>  arch/mips/bcm63xx/clk.c          | 3 +++
> >
> 
> 
> Gentle ping...
> 
> 
> If you are not keen on this,
> shall I split it per-arch and send to each arch subsystem?
> 

If we get acks from more arch maintainers we could take it
through clk tree, but we really don't maintain these other clk
implementations so it isn't very appropriate to take it through
clk tree anyway. Perhaps splitting it up per arch and sending it
that way and then Ccing akpm (aka the patch collector) would make
sure things get merged in a timely manner. Or Andrew could just
pick up this patch as is.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Stephen Boyd]

On 09/16, Masahiro Yamada wrote:
> Hi Stephen, Michael,
> 
> 2016-08-26 0:27 GMT+09:00 Florian Fainelli <f.fainelli@gmail.com>:
> > On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
> >> Many of clk_disable() implementations just return for NULL pointer,
> >> but this check is missing from some.  Let's make it tree-wide
> >> consistent.  It will allow clock consumers to call clk_disable()
> >> without NULL pointer check.
> >>
> >> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> >> Acked-by: Greg Ungerer <gerg@uclinux.org>
> >> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
> >> ---
> >>
> >> I came back after a long pause.
> >> You can see the discussion about the previous version:
> >> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
> >>
> >>
> >> Changes in v3:
> >>   - Return only when clk is NULL.  Do not take care of error pointer.
> >>
> >> Changes in v2:
> >>   - Rebase on Linux 4.6-rc1
> >>
> >>  arch/arm/mach-mmp/clock.c        | 3 +++
> >>  arch/arm/mach-w90x900/clock.c    | 3 +++
> >>  arch/blackfin/mach-bf609/clock.c | 3 +++
> >>  arch/m68k/coldfire/clk.c         | 4 ++++
> >>  arch/mips/bcm63xx/clk.c          | 3 +++
> >
> 
> 
> Gentle ping...
> 
> 
> If you are not keen on this,
> shall I split it per-arch and send to each arch subsystem?
> 

If we get acks from more arch maintainers we could take it
through clk tree, but we really don't maintain these other clk
implementations so it isn't very appropriate to take it through
clk tree anyway. Perhaps splitting it up per arch and sending it
that way and then Ccing akpm (aka the patch collector) would make
sure things get merged in a timely manner. Or Andrew could just
pick up this patch as is.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Stephen Boyd]

On 09/16, Masahiro Yamada wrote:
> Hi Stephen, Michael,
> 
> 2016-08-26 0:27 GMT+09:00 Florian Fainelli <f.fainelli@gmail.com>:
> > On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
> >> Many of clk_disable() implementations just return for NULL pointer,
> >> but this check is missing from some.  Let's make it tree-wide
> >> consistent.  It will allow clock consumers to call clk_disable()
> >> without NULL pointer check.
> >>
> >> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> >> Acked-by: Greg Ungerer <gerg@uclinux.org>
> >> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
> >> ---
> >>
> >> I came back after a long pause.
> >> You can see the discussion about the previous version:
> >> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
> >>
> >>
> >> Changes in v3:
> >>   - Return only when clk is NULL.  Do not take care of error pointer.
> >>
> >> Changes in v2:
> >>   - Rebase on Linux 4.6-rc1
> >>
> >>  arch/arm/mach-mmp/clock.c        | 3 +++
> >>  arch/arm/mach-w90x900/clock.c    | 3 +++
> >>  arch/blackfin/mach-bf609/clock.c | 3 +++
> >>  arch/m68k/coldfire/clk.c         | 4 ++++
> >>  arch/mips/bcm63xx/clk.c          | 3 +++
> >
> 
> 
> Gentle ping...
> 
> 
> If you are not keen on this,
> shall I split it per-arch and send to each arch subsystem?
> 

If we get acks from more arch maintainers we could take it
through clk tree, but we really don't maintain these other clk
implementations so it isn't very appropriate to take it through
clk tree anyway. Perhaps splitting it up per arch and sending it
that way and then Ccing akpm (aka the patch collector) would make
sure things get merged in a timely manner. Or Andrew could just
pick up this patch as is.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Stephen Boyd]

On 09/16, Masahiro Yamada wrote:
> Hi Stephen, Michael,
> 
> 2016-08-26 0:27 GMT+09:00 Florian Fainelli <f.fainelli@gmail.com>:
> > On 08/24/2016 10:26 AM, Masahiro Yamada wrote:
> >> Many of clk_disable() implementations just return for NULL pointer,
> >> but this check is missing from some.  Let's make it tree-wide
> >> consistent.  It will allow clock consumers to call clk_disable()
> >> without NULL pointer check.
> >>
> >> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
> >> Acked-by: Greg Ungerer <gerg@uclinux.org>
> >> Acked-by: Wan Zongshun <mcuos.com@gmail.com>
> >> ---
> >>
> >> I came back after a long pause.
> >> You can see the discussion about the previous version:
> >> https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html
> >>
> >>
> >> Changes in v3:
> >>   - Return only when clk is NULL.  Do not take care of error pointer.
> >>
> >> Changes in v2:
> >>   - Rebase on Linux 4.6-rc1
> >>
> >>  arch/arm/mach-mmp/clock.c        | 3 +++
> >>  arch/arm/mach-w90x900/clock.c    | 3 +++
> >>  arch/blackfin/mach-bf609/clock.c | 3 +++
> >>  arch/m68k/coldfire/clk.c         | 4 ++++
> >>  arch/mips/bcm63xx/clk.c          | 3 +++
> >
> 
> 
> Gentle ping...
> 
> 
> If you are not keen on this,
> shall I split it per-arch and send to each arch subsystem?
> 

If we get acks from more arch maintainers we could take it
through clk tree, but we really don't maintain these other clk
implementations so it isn't very appropriate to take it through
clk tree anyway. Perhaps splitting it up per arch and sending it
that way and then Ccing akpm (aka the patch collector) would make
sure things get merged in a timely manner. Or Andrew could just
pick up this patch as is.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v3] clk: let clk_disable() return immediately if clk is NULL

[Masahiro Yamada]

Many of clk_disable() implementations just return for NULL pointer,
but this check is missing from some.  Let's make it tree-wide
consistent.  It will allow clock consumers to call clk_disable()
without NULL pointer check.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Wan Zongshun <mcuos.com@gmail.com>
---

I came back after a long pause.
You can see the discussion about the previous version:
https://www.linux-mips.org/archives/linux-mips/2016-04/msg00063.html


Changes in v3:
  - Return only when clk is NULL.  Do not take care of error pointer.

Changes in v2:
  - Rebase on Linux 4.6-rc1

 arch/arm/mach-mmp/clock.c        | 3 +++
 arch/arm/mach-w90x900/clock.c    | 3 +++
 arch/blackfin/mach-bf609/clock.c | 3 +++
 arch/m68k/coldfire/clk.c         | 4 ++++
 arch/mips/bcm63xx/clk.c          | 3 +++
 5 files changed, 16 insertions(+)

diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index ac6633d..28fe64c 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -67,6 +67,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (!clk)
+		return;
+
 	WARN_ON(clk->enabled == 0);
 
 	spin_lock_irqsave(&clocks_lock, flags);
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 2c371ff..ac6fd1a 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -46,6 +46,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (!clk)
+		return;
+
 	WARN_ON(clk->enabled == 0);
 
 	spin_lock_irqsave(&clocks_lock, flags);
diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c
index 3783058..392a59b 100644
--- a/arch/blackfin/mach-bf609/clock.c
+++ b/arch/blackfin/mach-bf609/clock.c
@@ -97,6 +97,9 @@ EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
+	if (!clk)
+		return;
+
 	if (clk->ops && clk->ops->disable)
 		clk->ops->disable(clk);
 }
diff --git a/arch/m68k/coldfire/clk.c b/arch/m68k/coldfire/clk.c
index fddfdcc..1e3c7e9 100644
--- a/arch/m68k/coldfire/clk.c
+++ b/arch/m68k/coldfire/clk.c
@@ -101,6 +101,10 @@ EXPORT_SYMBOL(clk_enable);
 void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
+
+	if (!clk)
+		return;
+
 	spin_lock_irqsave(&clk_lock, flags);
 	if ((--clk->enabled == 0) && clk->clk_ops)
 		clk->clk_ops->disable(clk);
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 6375652..b49fc9c 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -326,6 +326,9 @@ EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
+	if (!clk)
+		return;
+
 	mutex_lock(&clocks_mutex);
 	clk_disable_unlocked(clk);
 	mutex_unlock(&clocks_mutex);
-- 
1.9.1