From: Arnd Bergmann <arnd@arndb.de>
To: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>,
Borislav Petkov <bp@alien8.de>,
jlu@pengutronix.de, Gregory CLEMENT <gregory.clement@bootlin.com>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
DTML <devicetree@vger.kernel.org>,
linux-edac@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: Re: [PATCH v6 5/9] dt-bindings: ARM: document marvell,ecc-enable binding
Date: Fri, 9 Nov 2018 12:40:06 +0100 [thread overview]
Message-ID: <CAK8P3a3PNvBhyQw0bfGxKmxj+KeJB2_TXtDx2R1BpjTCYNqVkA@mail.gmail.com> (raw)
In-Reply-To: <20181109070349.20464-6-chris.packham@alliedtelesis.co.nz>
On Fri, Nov 9, 2018 at 8:04 AM Chris Packham
<chris.packham@alliedtelesis.co.nz> wrote:
>
> Add documentation for the marvell,ecc-enable and marvell,ecc-disable
> properties which can be used to enable/disable ECC on the Marvell aurora
> cache.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
Why do you need both enable and disable? Wouldn't one of them be enough here?
Arnd
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>,
Borislav Petkov <bp@alien8.de>,
jlu@pengutronix.de, Gregory CLEMENT <gregory.clement@bootlin.com>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
DTML <devicetree@vger.kernel.org>,
linux-edac@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: [v6,5/9] dt-bindings: ARM: document marvell,ecc-enable binding
Date: Fri, 9 Nov 2018 12:40:06 +0100 [thread overview]
Message-ID: <CAK8P3a3PNvBhyQw0bfGxKmxj+KeJB2_TXtDx2R1BpjTCYNqVkA@mail.gmail.com> (raw)
On Fri, Nov 9, 2018 at 8:04 AM Chris Packham
<chris.packham@alliedtelesis.co.nz> wrote:
>
> Add documentation for the marvell,ecc-enable and marvell,ecc-disable
> properties which can be used to enable/disable ECC on the Marvell aurora
> cache.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
Why do you need both enable and disable? Wouldn't one of them be enough here?
Arnd
WARNING: multiple messages have this Message-ID (diff)
From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 5/9] dt-bindings: ARM: document marvell, ecc-enable binding
Date: Fri, 9 Nov 2018 12:40:06 +0100 [thread overview]
Message-ID: <CAK8P3a3PNvBhyQw0bfGxKmxj+KeJB2_TXtDx2R1BpjTCYNqVkA@mail.gmail.com> (raw)
In-Reply-To: <20181109070349.20464-6-chris.packham@alliedtelesis.co.nz>
On Fri, Nov 9, 2018 at 8:04 AM Chris Packham
<chris.packham@alliedtelesis.co.nz> wrote:
>
> Add documentation for the marvell,ecc-enable and marvell,ecc-disable
> properties which can be used to enable/disable ECC on the Marvell aurora
> cache.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
Why do you need both enable and disable? Wouldn't one of them be enough here?
Arnd
next prev parent reply other threads:[~2018-11-09 11:40 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-09 7:03 [PATCH v6 0/9] EDAC drivers for Armada XP L2 and DDR Chris Packham
2018-11-09 7:03 ` Chris Packham
2018-11-09 7:03 ` [PATCH v6 1/9] ARM: l2c: move cache-aurora-l2.h to asm/hardware Chris Packham
2018-11-09 7:03 ` Chris Packham
2018-11-09 7:03 ` [v6,1/9] " Chris Packham
2018-11-09 7:03 ` [PATCH v6 2/9] ARM: aurora-l2: add prefix to MAX_RANGE_SIZE Chris Packham
2018-11-09 7:03 ` Chris Packham
2018-11-09 7:03 ` [v6,2/9] " Chris Packham
2018-11-09 7:03 ` [PATCH v6 3/9] ARM: aurora-l2: add defines for parity and ECC registers Chris Packham
2018-11-09 7:03 ` Chris Packham
2018-11-09 7:03 ` [v6,3/9] " Chris Packham
2018-11-09 7:03 ` [PATCH v6 4/9] ARM: l2x0: support parity-enable/disable on aurora Chris Packham
2018-11-09 7:03 ` Chris Packham
2018-11-09 7:03 ` [v6,4/9] " Chris Packham
2018-11-09 7:03 ` [PATCH v6 5/9] dt-bindings: ARM: document marvell,ecc-enable binding Chris Packham
2018-11-09 7:03 ` Chris Packham
2018-11-09 7:03 ` [v6,5/9] " Chris Packham
2018-11-09 11:40 ` Arnd Bergmann [this message]
2018-11-09 11:40 ` [PATCH v6 5/9] dt-bindings: ARM: document marvell, ecc-enable binding Arnd Bergmann
2018-11-09 11:40 ` [v6,5/9] dt-bindings: ARM: document marvell,ecc-enable binding Arnd Bergmann
2018-11-09 11:48 ` [PATCH v6 5/9] " Russell King - ARM Linux
2018-11-09 11:48 ` Russell King - ARM Linux
2018-11-09 11:48 ` [v6,5/9] " Russell King - ARM Linux
2018-11-09 15:58 ` [PATCH v6 5/9] " Arnd Bergmann
2018-11-09 15:58 ` [PATCH v6 5/9] dt-bindings: ARM: document marvell, ecc-enable binding Arnd Bergmann
2018-11-09 15:58 ` [v6,5/9] dt-bindings: ARM: document marvell,ecc-enable binding Arnd Bergmann
2018-11-11 19:57 ` [PATCH v6 5/9] " Chris Packham
2018-11-11 19:57 ` Chris Packham
2018-11-11 19:57 ` [v6,5/9] " Chris Packham
2018-11-11 22:35 ` [PATCH v6 5/9] " Rob Herring
2018-11-11 22:35 ` Rob Herring
2018-11-11 22:35 ` Rob Herring
2018-11-11 22:35 ` [v6,5/9] " Rob Herring
2018-11-09 7:03 ` [PATCH v6 6/9] ARM: l2x0: add marvell,ecc-enable property for aurora Chris Packham
2018-11-09 7:03 ` Chris Packham
2018-11-09 7:03 ` [v6,6/9] " Chris Packham
2018-11-09 7:03 ` [PATCH v6 7/9] EDAC: Add missing debugfs_create_x32 wrapper Chris Packham
2018-11-09 7:03 ` Chris Packham
2018-11-09 7:03 ` [v6,7/9] " Chris Packham
2018-11-09 7:03 ` [PATCH v6 8/9] EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC Chris Packham
2018-11-09 7:03 ` Chris Packham
2018-11-09 7:03 ` [v6,8/9] " Chris Packham
2018-11-11 19:40 ` [PATCH v6 8/9] " Borislav Petkov
2018-11-11 19:40 ` Borislav Petkov
2018-11-11 19:40 ` [v6,8/9] " Borislav Petkov
2018-11-09 7:03 ` [PATCH v6 9/9] EDAC: armada_xp: Add support for more SoCs Chris Packham
2018-11-09 7:03 ` Chris Packham
2018-11-09 7:03 ` [v6,9/9] " Chris Packham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAK8P3a3PNvBhyQw0bfGxKmxj+KeJB2_TXtDx2R1BpjTCYNqVkA@mail.gmail.com \
--to=arnd@arndb.de \
--cc=bp@alien8.de \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=jlu@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.