[PATCH v11 00/10] Add support for the silergy,sy7636a

[PATCH v11 00/10] Add support for the silergy,sy7636a

[Alistair Francis]

This series applied on top of the "mfd: simple-mfd-i2c: Add support for
registering devices via MFD cells" patch. Once "mfd: simple-mfd-i2c: Add
support for registering devices via MFD cells" is merged this series is
ready to go.

v11:
 - Address comments on hwmon
 - Improve "mfd: simple-mfd-i2c: Add a Kconfig name" commit message
v10:
 - Use dev_get_regmap() instead of dev_get_drvdata()
v9:
 - Convert to use the simple-mfd-i2c instead

Alistair Francis (10):
  dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml
  mfd: simple-mfd-i2c: Add a Kconfig name
  mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a
  regulator: sy7636a: Remove requirement on sy7636a mfd
  thermal: sy7636a: Add thermal driver for sy7636a
  hwmon: sy7636a: Add temperature driver for sy7636a
  ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a
  ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a
  ARM: imx_v6_v7_defconfig: Enable backlight class devices
  ARM: dts: imx7d: remarkable2: Enable lcdif

 .../bindings/mfd/silergy,sy7636a.yaml         |  79 ++++++++++++
 arch/arm/boot/dts/imx7d-remarkable2.dts       | 115 ++++++++++++++++++
 arch/arm/configs/imx_v6_v7_defconfig          |   5 +
 drivers/hwmon/Kconfig                         |  10 ++
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/sy7636a-hwmon.c                 |  77 ++++++++++++
 drivers/mfd/Kconfig                           |   2 +-
 drivers/mfd/simple-mfd-i2c.c                  |  12 ++
 drivers/regulator/Kconfig                     |   1 -
 drivers/regulator/sy7636a-regulator.c         |   2 +-
 drivers/thermal/Kconfig                       |   6 +
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/sy7636a_thermal.c             |  94 ++++++++++++++
 include/linux/mfd/sy7636a.h                   |  41 +++++++
 14 files changed, 443 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
 create mode 100644 drivers/hwmon/sy7636a-hwmon.c
 create mode 100644 drivers/thermal/sy7636a_thermal.c
 create mode 100644 include/linux/mfd/sy7636a.h

-- 
2.31.1

[PATCH v11 01/10] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml

[Alistair Francis]

Initial support for the Silergy SY7636A Power Management chip
and regulator.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/mfd/silergy,sy7636a.yaml         | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml

diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
new file mode 100644
index 000000000000..0566f9498e2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy7636a PMIC
+
+maintainers:
+  - Alistair Francis <alistair@alistair23.me>
+
+properties:
+  compatible:
+    const: silergy,sy7636a
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  epd-pwr-good-gpios:
+    description:
+      Specifying the power good GPIOs.
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    properties:
+      compatible:
+        const: silergy,sy7636a-regulator
+
+      vcom:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        properties:
+          regulator-name:
+            const: vcom
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@62 {
+        compatible = "silergy,sy7636a";
+        reg = <0x62>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_epdpmic>;
+        #thermal-sensor-cells = <0>;
+
+        regulators {
+          reg_epdpmic: vcom {
+            regulator-name = "vcom";
+            regulator-boot-on;
+          };
+        };
+      };
+    };
+...
-- 
2.31.1

[PATCH v11 02/10] mfd: simple-mfd-i2c: Add a Kconfig name

[Alistair Francis]

Add a Kconfig name to the "Simple Multi-Functional Device support (I2C)"
device so that it can be enabled via menuconfig.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 drivers/mfd/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6a3fd2d75f96..ff95d00dc1ac 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1176,7 +1176,7 @@ config MFD_SI476X_CORE
 	  module will be called si476x-core.
 
 config MFD_SIMPLE_MFD_I2C
-	tristate
+	tristate "Simple Multi-Functional Device support (I2C)"
 	depends on I2C
 	select REGMAP_I2C
 	help
-- 
2.31.1

[PATCH v11 03/10] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a

[Alistair Francis]

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mfd/simple-mfd-i2c.c | 12 +++++++++++
 include/linux/mfd/sy7636a.h  | 41 ++++++++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 include/linux/mfd/sy7636a.h

diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
index 583e8c7924af..ce213c68b8cf 100644
--- a/drivers/mfd/simple-mfd-i2c.c
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -62,8 +62,20 @@ static int simple_mfd_i2c_probe(struct i2c_client *i2c)
 	return ret;
 }
 
+static const struct mfd_cell sy7636a_cells[] = {
+	{ .name = "sy7636a-regulator", },
+	{ .name = "sy7636a-temperature", },
+	{ .name = "sy7636a-thermal", },
+};
+
+static const struct simple_mfd_data silergy_sy7636a = {
+	.mfd_cell = sy7636a_cells,
+	.mfd_cell_size = ARRAY_SIZE(sy7636a_cells),
+};
+
 static const struct of_device_id simple_mfd_i2c_of_match[] = {
 	{ .compatible = "kontron,sl28cpld" },
+	{ .compatible = "silergy,sy7636a", .data = &silergy_sy7636a},
 	{}
 };
 MODULE_DEVICE_TABLE(of, simple_mfd_i2c_of_match);
diff --git a/include/linux/mfd/sy7636a.h b/include/linux/mfd/sy7636a.h
new file mode 100644
index 000000000000..15caa54f0432
--- /dev/null
+++ b/include/linux/mfd/sy7636a.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Functions to access SY3686A power management chip.
+ *
+ * Copyright (C) 2021 reMarkable AS - http://www.remarkable.com/
+ */
+
+#ifndef __MFD_SY7636A_H
+#define __MFD_SY7636A_H
+
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#define SY7636A_REG_OPERATION_MODE_CRL		0x00
+#define SY7636A_OPERATION_MODE_CRL_VCOMCTL	BIT(6)
+#define SY7636A_OPERATION_MODE_CRL_ONOFF	BIT(7)
+#define SY7636A_REG_VCOM_ADJUST_CTRL_L		0x01
+#define SY7636A_REG_VCOM_ADJUST_CTRL_H		0x02
+#define SY7636A_REG_VCOM_ADJUST_CTRL_MASK	0x01ff
+#define SY7636A_REG_VLDO_VOLTAGE_ADJULST_CTRL	0x03
+#define SY7636A_REG_POWER_ON_DELAY_TIME		0x06
+#define SY7636A_REG_FAULT_FLAG			0x07
+#define SY7636A_FAULT_FLAG_PG			BIT(0)
+#define SY7636A_REG_TERMISTOR_READOUT		0x08
+
+#define SY7636A_REG_MAX				0x08
+
+#define VCOM_MIN		0
+#define VCOM_MAX		5000
+
+#define VCOM_ADJUST_CTRL_MASK	0x1ff
+// Used to shift the high byte
+#define VCOM_ADJUST_CTRL_SHIFT	8
+// Used to scale from VCOM_ADJUST_CTRL to mv
+#define VCOM_ADJUST_CTRL_SCAL	10000
+
+#define FAULT_FLAG_SHIFT	1
+
+#endif /* __LINUX_MFD_SY7636A_H */
-- 
2.31.1

[PATCH v11 04/10] regulator: sy7636a: Remove requirement on sy7636a mfd

[Alistair Francis]

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 drivers/regulator/Kconfig             | 1 -
 drivers/regulator/sy7636a-regulator.c | 2 +-
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 24ce9a17ab4f..54ba141d114a 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1179,7 +1179,6 @@ config REGULATOR_STW481X_VMMC
 
 config REGULATOR_SY7636A
 	tristate "Silergy SY7636A voltage regulator"
-	depends on MFD_SY7636A
 	help
 	  This driver supports Silergy SY3686A voltage regulator.
 
diff --git a/drivers/regulator/sy7636a-regulator.c b/drivers/regulator/sy7636a-regulator.c
index 8360b3947ead..22fddf868e4c 100644
--- a/drivers/regulator/sy7636a-regulator.c
+++ b/drivers/regulator/sy7636a-regulator.c
@@ -70,7 +70,7 @@ static const struct regulator_desc desc = {
 
 static int sy7636a_regulator_probe(struct platform_device *pdev)
 {
-	struct regmap *regmap = dev_get_drvdata(pdev->dev.parent);
+	struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
 	struct gpio_desc *gdp;
-- 
2.31.1

[PATCH v11 05/10] thermal: sy7636a: Add thermal driver for sy7636a

[Alistair Francis]

Add thermal driver to enable kernel based polling
and shutdown of device for temperatures out of spec

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 drivers/thermal/Kconfig           |  6 ++
 drivers/thermal/Makefile          |  1 +
 drivers/thermal/sy7636a_thermal.c | 94 +++++++++++++++++++++++++++++++
 3 files changed, 101 insertions(+)
 create mode 100644 drivers/thermal/sy7636a_thermal.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index d7f44deab5b1..6ee0e7de1b37 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -450,6 +450,12 @@ depends on (ARCH_STI || ARCH_STM32) && OF
 source "drivers/thermal/st/Kconfig"
 endmenu
 
+config SY7636A_THERMAL
+	tristate "SY7636A thermal management"
+	help
+	  Enable the sy7636a thermal driver, which supports the
+	  temperature sensor embedded in Silabs SY7636A IC.
+
 source "drivers/thermal/tegra/Kconfig"
 
 config GENERIC_ADC_THERMAL
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 82fc3e616e54..2e1aca8a0a09 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_DA9062_THERMAL)	+= da9062-thermal.o
 obj-y				+= intel/
 obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
 obj-y				+= st/
+obj-$(CONFIG_SY7636A_THERMAL)	+= sy7636a_thermal.o
 obj-$(CONFIG_QCOM_TSENS)	+= qcom/
 obj-y				+= tegra/
 obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
diff --git a/drivers/thermal/sy7636a_thermal.c b/drivers/thermal/sy7636a_thermal.c
new file mode 100644
index 000000000000..9e58305ca3ce
--- /dev/null
+++ b/drivers/thermal/sy7636a_thermal.c
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Functions to access SY3686A power management chip temperature
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ * Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+ *          Alistair Francis <alistair@alistair23.me>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static int sy7636a_get_temp(void *arg, int *res)
+{
+	unsigned int mode_ctr;
+	int ret, reg_val;
+	struct regmap *regmap = arg;
+	bool isVoltageActive;
+
+	ret = regmap_read(regmap,
+			SY7636A_REG_OPERATION_MODE_CRL, &mode_ctr);
+	if (ret)
+		return ret;
+
+	isVoltageActive = mode_ctr & SY7636A_OPERATION_MODE_CRL_ONOFF;
+
+	/* If operation mode isn't set to control, then let's set it. */
+	if (!isVoltageActive) {
+		ret = regmap_write(regmap,
+				SY7636A_REG_OPERATION_MODE_CRL,
+				mode_ctr | SY7636A_OPERATION_MODE_CRL_ONOFF);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(regmap,
+			SY7636A_REG_TERMISTOR_READOUT, &reg_val);
+	if (ret)
+		return ret;
+
+	/* Restore the operation mode if it wasn't set */
+	if (!isVoltageActive) {
+		ret = regmap_write(regmap,
+				SY7636A_REG_OPERATION_MODE_CRL,
+				mode_ctr);
+		if (ret)
+			return ret;
+	}
+
+	*res = reg_val * 1000;
+
+	return ret;
+}
+
+static const struct thermal_zone_of_device_ops ops = {
+	.get_temp	= sy7636a_get_temp,
+};
+
+static int sy7636a_thermal_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	struct thermal_zone_device *thermal_zone_dev;
+
+	thermal_zone_dev = devm_thermal_zone_of_sensor_register(
+			pdev->dev.parent,
+			0,
+			regmap,
+			&ops);
+
+	return PTR_ERR_OR_ZERO(thermal_zone_dev);
+}
+
+static const struct platform_device_id sy7636a_thermal_id_table[] = {
+	{ "sy7636a-thermal", },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, sy7636a_thermal_id_table);
+
+static struct platform_driver sy7636a_thermal_driver = {
+	.driver = {
+		.name = "sy7636a-thermal",
+	},
+	.probe = sy7636a_thermal_probe,
+	.id_table = sy7636a_thermal_id_table,
+};
+module_platform_driver(sy7636a_thermal_driver);
+
+MODULE_AUTHOR("Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>");
+MODULE_DESCRIPTION("SY7636A thermal driver");
+MODULE_LICENSE("GPL v2");
-- 
2.31.1

[PATCH v11 06/10] hwmon: sy7636a: Add temperature driver for sy7636a

[Alistair Francis]

This is a multi-function device to interface with the sy7636a
EPD PMIC chip from Silergy.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/configs/imx_v6_v7_defconfig |  1 +
 drivers/hwmon/Kconfig                | 10 ++++
 drivers/hwmon/Makefile               |  1 +
 drivers/hwmon/sy7636a-hwmon.c        | 77 ++++++++++++++++++++++++++++
 4 files changed, 89 insertions(+)
 create mode 100644 drivers/hwmon/sy7636a-hwmon.c

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 477dac1edc75..ef8c6dca1277 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -229,6 +229,7 @@ CONFIG_RN5T618_POWER=m
 CONFIG_SENSORS_MC13783_ADC=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_SY7636A=y
 CONFIG_THERMAL_STATISTICS=y
 CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_CPU_THERMAL=y
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e3675377bc5d..6cae12de59cd 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1631,6 +1631,16 @@ config SENSORS_SIS5595
 	  This driver can also be built as a module. If so, the module
 	  will be called sis5595.
 
+config SENSORS_SY7636A
+	tristate "Silergy SY7636A"
+	depends on I2C
+	help
+	  If you say yes here you get support for the thermistor readout of
+	  the Silergy SY7636A PMIC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called sy7636a-hwmon.
+
 config SENSORS_DME1737
 	tristate "SMSC DME1737, SCH311x and compatibles"
 	depends on I2C && !PPC
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d712c61c1f5e..8b2e09e25b24 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -180,6 +180,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
 obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
+obj-$(CONFIG_SENSORS_SY7636A)	+= sy7636a-hwmon.o
 obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
 obj-$(CONFIG_SENSORS_TC74)	+= tc74.o
 obj-$(CONFIG_SENSORS_THMC50)	+= thmc50.o
diff --git a/drivers/hwmon/sy7636a-hwmon.c b/drivers/hwmon/sy7636a-hwmon.c
new file mode 100644
index 000000000000..e0204278339b
--- /dev/null
+++ b/drivers/hwmon/sy7636a-hwmon.c
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Functions to access SY3686A power management chip temperature
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ * Authors: Lars Ivar Miljeteig <lars.ivar.miljeteig@remarkable.com>
+ *          Alistair Francis <alistair@alistair23.me>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static ssize_t show_temp(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	unsigned int reg_val;
+	struct regmap *regmap = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regmap_read(regmap,
+			SY7636A_REG_TERMISTOR_READOUT, &reg_val);
+	if (ret)
+		return ret;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", reg_val);
+}
+
+static SENSOR_DEVICE_ATTR(temp0, 0444, show_temp, NULL, 0);
+
+static struct attribute *sy7636a_attrs[] = {
+	&sensor_dev_attr_temp0.dev_attr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(sy7636a);
+
+static int sy7636a_sensor_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	struct device *hwmon_dev;
+	int err;
+
+	if (!regmap)
+		return -EPROBE_DEFER;
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
+			"sy7636a_temperature", regmap, sy7636a_groups);
+
+	if (IS_ERR(hwmon_dev)) {
+		err = PTR_ERR(hwmon_dev);
+		dev_err(&pdev->dev, "Unable to register hwmon device, returned %d", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static struct platform_driver sy7636a_sensor_driver = {
+	.probe = sy7636a_sensor_probe,
+	.driver = {
+		.name = "sy7636a-temperature",
+	},
+};
+module_platform_driver(sy7636a_sensor_driver);
+
+MODULE_DESCRIPTION("SY7636A sensor driver");
+MODULE_LICENSE("GPL");
-- 
2.31.1

[PATCH v11 07/10] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a

[Alistair Francis]

Enable the silergy,sy7636a and silergy,sy7636a-regulator for the
reMarkable2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/configs/imx_v6_v7_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index ef8c6dca1277..0ac7c61c6f3d 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -234,6 +234,7 @@ CONFIG_THERMAL_STATISTICS=y
 CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
+CONFIG_SY7636A_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_DA9062_WATCHDOG=y
 CONFIG_DA9063_WATCHDOG=m
@@ -249,6 +250,7 @@ CONFIG_MFD_RN5T618=y
 CONFIG_MFD_STMPE=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MFD_SIMPLE_MFD_I2C=y
 CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_DA9062=y
@@ -258,6 +260,7 @@ CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_REGULATOR_PFUZE100=y
 CONFIG_REGULATOR_RN5T618=y
+CONFIG_REGULATOR_SY7636A=y
 CONFIG_RC_CORE=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_GPIO_CIR=y
-- 
2.31.1

[PATCH v11 08/10] ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a

[Alistair Francis]

Enable the silergy,sy7636a and silergy,sy7636a-regulator on the
reMarkable2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 41 +++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 052f9da32398..ab2f61d9c635 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -86,6 +86,33 @@ wacom_digitizer: digitizer@9 {
 	};
 };
 
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	epd_pmic: sy7636a@62 {
+		compatible = "silergy,sy7636a";
+		reg = <0x62>;
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_epdpmic>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#thermal-sensor-cells = <0>;
+
+		epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		regulators {
+			reg_epdpmic: vcom {
+				regulator-name = "vcom";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -179,6 +206,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13	0x14
 		>;
 	};
 
+	pinctrl_epdpmic: epdpmicgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074
+			MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
@@ -186,6 +220,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
 		>;
 	};
 
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SDA__I2C4_SDA		0x4000007f
+			MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-- 
2.31.1

[PATCH v11 09/10] ARM: imx_v6_v7_defconfig: Enable backlight class devices

[Alistair Francis]

The BACKLIGHT_CLASS_DEVICE config is required for the already enabled
DRM_SIMPLE_PANEL to work so let's enable BACKLIGHT_CLASS_DEVICE.

This allows the mxsfb probe to complete successfully on the reMarkable
2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/configs/imx_v6_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 0ac7c61c6f3d..486c59cdb174 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -300,6 +300,7 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y
 CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_GPIO=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-- 
2.31.1

[PATCH v11 10/10] ARM: dts: imx7d: remarkable2: Enable lcdif

[Alistair Francis]

Connect the dispaly on the reMarkable2.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 arch/arm/boot/dts/imx7d-remarkable2.dts | 74 +++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index ab2f61d9c635..7a48ffb14498 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -47,6 +47,16 @@ reg_digitizer: regulator-digitizer {
 		startup-delay-us = <100000>; /* 100 ms */
 	};
 
+	reg_sdoe: regulator-sdoe {
+		compatible = "regulator-fixed";
+		regulator-name = "SDOE";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pinctrl_sdoe_reg>;
+		pinctrl-1 = <&pinctrl_sdoe_reg>;
+		gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -55,6 +65,16 @@ wifi_pwrseq: wifi_pwrseq {
 		clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
 		clock-names = "ext_clock";
 	};
+
+	panel {
+		compatible = "eink,vb3300-kca";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
 };
 
 &clks {
@@ -113,6 +133,20 @@ reg_epdpmic: vcom {
 	};
 };
 
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif>;
+	lcd-supply = <&reg_epdpmic>;
+	lcd2-supply = <&reg_sdoe>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -227,6 +261,46 @@ MX7D_PAD_I2C4_SCL__I2C4_SCL		0x4000007f
 		>;
 	};
 
+	pinctrl_lcdif: lcdifgrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
+			MX7D_PAD_LCD_DATA01__LCD_DATA1		0x79
+			MX7D_PAD_LCD_DATA02__LCD_DATA2		0x79
+			MX7D_PAD_LCD_DATA03__LCD_DATA3		0x79
+			MX7D_PAD_LCD_DATA04__LCD_DATA4		0x79
+			MX7D_PAD_LCD_DATA05__LCD_DATA5		0x79
+			MX7D_PAD_LCD_DATA06__LCD_DATA6		0x79
+			MX7D_PAD_LCD_DATA07__LCD_DATA7		0x79
+			MX7D_PAD_LCD_DATA08__LCD_DATA8		0x79
+			MX7D_PAD_LCD_DATA09__LCD_DATA9		0x79
+			MX7D_PAD_LCD_DATA10__LCD_DATA10		0x79
+			MX7D_PAD_LCD_DATA11__LCD_DATA11		0x79
+			MX7D_PAD_LCD_DATA12__LCD_DATA12		0x79
+			MX7D_PAD_LCD_DATA13__LCD_DATA13		0x79
+			MX7D_PAD_LCD_DATA14__LCD_DATA14		0x79
+			MX7D_PAD_LCD_DATA15__LCD_DATA15		0x79
+
+			MX7D_PAD_LCD_DATA17__LCD_DATA17		0x79
+			MX7D_PAD_LCD_DATA18__LCD_DATA18		0x79
+			MX7D_PAD_LCD_DATA19__LCD_DATA19		0x79
+			MX7D_PAD_LCD_DATA20__LCD_DATA20		0x79
+			MX7D_PAD_LCD_DATA21__LCD_DATA21		0x79
+
+			MX7D_PAD_LCD_DATA23__LCD_DATA23		0x79
+			MX7D_PAD_LCD_CLK__LCD_CLK		0x79
+			MX7D_PAD_LCD_ENABLE__LCD_ENABLE		0x79
+			MX7D_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX7D_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX7D_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
+	pinctrl_sdoe_reg: sdoereggrp {
+		fsl,pins = <
+			MX7D_PAD_LCD_DATA22__GPIO3_IO27		0x74
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
-- 
2.31.1

Re: [PATCH v11 00/10] Add support for the silergy,sy7636a

[Alistair Francis]

On Thu, Aug 19, 2021 at 9:15 PM Alistair Francis <alistair@alistair23.me> wrote:
>
> This series applied on top of the "mfd: simple-mfd-i2c: Add support for
> registering devices via MFD cells" patch. Once "mfd: simple-mfd-i2c: Add
> support for registering devices via MFD cells" is merged this series is
> ready to go.
>
> v11:
>  - Address comments on hwmon
>  - Improve "mfd: simple-mfd-i2c: Add a Kconfig name" commit message
> v10:
>  - Use dev_get_regmap() instead of dev_get_drvdata()
> v9:
>  - Convert to use the simple-mfd-i2c instead
>
> Alistair Francis (10):
>   dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml
>   mfd: simple-mfd-i2c: Add a Kconfig name
>   mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a
>   regulator: sy7636a: Remove requirement on sy7636a mfd
>   thermal: sy7636a: Add thermal driver for sy7636a
>   hwmon: sy7636a: Add temperature driver for sy7636a
>   ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a
>   ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a
>   ARM: imx_v6_v7_defconfig: Enable backlight class devices
>   ARM: dts: imx7d: remarkable2: Enable lcdif

It doesn't look like "mfd: simple-mfd-i2c: Add support for registering
devices via MFD cells" has made it into 5.15, is something else
required?

Alistair

>
>  .../bindings/mfd/silergy,sy7636a.yaml         |  79 ++++++++++++
>  arch/arm/boot/dts/imx7d-remarkable2.dts       | 115 ++++++++++++++++++
>  arch/arm/configs/imx_v6_v7_defconfig          |   5 +
>  drivers/hwmon/Kconfig                         |  10 ++
>  drivers/hwmon/Makefile                        |   1 +
>  drivers/hwmon/sy7636a-hwmon.c                 |  77 ++++++++++++
>  drivers/mfd/Kconfig                           |   2 +-
>  drivers/mfd/simple-mfd-i2c.c                  |  12 ++
>  drivers/regulator/Kconfig                     |   1 -
>  drivers/regulator/sy7636a-regulator.c         |   2 +-
>  drivers/thermal/Kconfig                       |   6 +
>  drivers/thermal/Makefile                      |   1 +
>  drivers/thermal/sy7636a_thermal.c             |  94 ++++++++++++++
>  include/linux/mfd/sy7636a.h                   |  41 +++++++
>  14 files changed, 443 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
>  create mode 100644 drivers/hwmon/sy7636a-hwmon.c
>  create mode 100644 drivers/thermal/sy7636a_thermal.c
>  create mode 100644 include/linux/mfd/sy7636a.h
>
> --
> 2.31.1
>