* libgpiod v0.1: C library and command-line tools for controlling GPIOs @ 2017-01-18 15:48 ` Bartosz Golaszewski 0 siblings, 0 replies; 13+ messages in thread From: Bartosz Golaszewski @ 2017-01-18 15:48 UTC (permalink / raw) To: Linus Walleij, Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio-u79uwXL29TY76Z2rM5mHXA I'd like to announce the first release of libgpiod. The project consists of a C library and a set of command-line tools for controlling GPIOs over the new character device interface. The tools support reading & setting values, keeping the lines exported, finding GPIO lines by name, monitoring events etc. The source code can be found at: https://github.com/brgl/libgpiod I also submitted a patch for the project to be included in buildroot. Best regards, Bartosz Golaszewski ^ permalink raw reply [flat|nested] 13+ messages in thread
* libgpiod v0.1: C library and command-line tools for controlling GPIOs @ 2017-01-18 15:48 ` Bartosz Golaszewski 0 siblings, 0 replies; 13+ messages in thread From: Bartosz Golaszewski @ 2017-01-18 15:48 UTC (permalink / raw) To: Linus Walleij, Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio I'd like to announce the first release of libgpiod. The project consists of a C library and a set of command-line tools for controlling GPIOs over the new character device interface. The tools support reading & setting values, keeping the lines exported, finding GPIO lines by name, monitoring events etc. The source code can be found at: https://github.com/brgl/libgpiod I also submitted a patch for the project to be included in buildroot. Best regards, Bartosz Golaszewski ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: libgpiod v0.1: C library and command-line tools for controlling GPIOs 2017-01-18 15:48 ` Bartosz Golaszewski (?) @ 2017-01-19 9:34 ` Linus Walleij [not found] ` <CACRpkdbq5aFZZfNN1UxjrxTzsHQBdkLcz9LCx3BSp-JoirXR6A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> -1 siblings, 1 reply; 13+ messages in thread From: Linus Walleij @ 2017-01-19 9:34 UTC (permalink / raw) To: Bartosz Golaszewski Cc: Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio On Wed, Jan 18, 2017 at 4:48 PM, Bartosz Golaszewski <bgolaszewski@baylibre.com> wrote: > I'd like to announce the first release of libgpiod. The project > consists of a C library and a set of command-line tools for > controlling GPIOs over the new character device interface. Nice! Have you thought about adding bindings for higher order languages etc that I think can make GPIO programming a bliss? I created some for Control Groups at a point, using ctypes: https://sourceforge.net/p/cgfreak/code/ci/master/tree/pylibcgroup.py The point is not that Python would be so great (some think so) more that this kind of stuff makes GPIOs so much more accessible, apart from good old C. Yours, Linus Walleij ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <CACRpkdbq5aFZZfNN1UxjrxTzsHQBdkLcz9LCx3BSp-JoirXR6A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: libgpiod v0.1: C library and command-line tools for controlling GPIOs 2017-01-19 9:34 ` Linus Walleij @ 2017-01-19 10:10 ` Bartosz Golaszewski 0 siblings, 0 replies; 13+ messages in thread From: Bartosz Golaszewski @ 2017-01-19 10:10 UTC (permalink / raw) To: Linus Walleij Cc: Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio-u79uwXL29TY76Z2rM5mHXA 2017-01-19 10:34 GMT+01:00 Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>: > On Wed, Jan 18, 2017 at 4:48 PM, Bartosz Golaszewski > <bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> wrote: > >> I'd like to announce the first release of libgpiod. The project >> consists of a C library and a set of command-line tools for >> controlling GPIOs over the new character device interface. > > Nice! > > Have you thought about adding bindings for higher order > languages etc that I think can make GPIO programming a bliss? > I have thought about soooo many things I could do, but the problem is - as usual - time I can devote to this project. ;) Anyways: I'll welcome any contribution, so if you'll happen to have some time to do it, I'll surely include it. > I created some for Control Groups at a point, using ctypes: > https://sourceforge.net/p/cgfreak/code/ci/master/tree/pylibcgroup.py > FYI check out libsigrok - it generates python bindings from C++ using swig - maybe this would be a good approach to decrease the amount of work needed. > The point is not that Python would be so great (some think > so) more that this kind of stuff makes GPIOs so much more > accessible, apart from good old C. > Yep, certainly agree. This is definitely a feature I'd like to have in the future. Best regards, Bartosz Golaszewski ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: libgpiod v0.1: C library and command-line tools for controlling GPIOs @ 2017-01-19 10:10 ` Bartosz Golaszewski 0 siblings, 0 replies; 13+ messages in thread From: Bartosz Golaszewski @ 2017-01-19 10:10 UTC (permalink / raw) To: Linus Walleij Cc: Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio 2017-01-19 10:34 GMT+01:00 Linus Walleij <linus.walleij@linaro.org>: > On Wed, Jan 18, 2017 at 4:48 PM, Bartosz Golaszewski > <bgolaszewski@baylibre.com> wrote: > >> I'd like to announce the first release of libgpiod. The project >> consists of a C library and a set of command-line tools for >> controlling GPIOs over the new character device interface. > > Nice! > > Have you thought about adding bindings for higher order > languages etc that I think can make GPIO programming a bliss? > I have thought about soooo many things I could do, but the problem is - as usual - time I can devote to this project. ;) Anyways: I'll welcome any contribution, so if you'll happen to have some time to do it, I'll surely include it. > I created some for Control Groups at a point, using ctypes: > https://sourceforge.net/p/cgfreak/code/ci/master/tree/pylibcgroup.py > FYI check out libsigrok - it generates python bindings from C++ using swig - maybe this would be a good approach to decrease the amount of work needed. > The point is not that Python would be so great (some think > so) more that this kind of stuff makes GPIOs so much more > accessible, apart from good old C. > Yep, certainly agree. This is definitely a feature I'd like to have in the future. Best regards, Bartosz Golaszewski ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: libgpiod v0.1: C library and command-line tools for controlling GPIOs 2017-01-19 10:10 ` Bartosz Golaszewski (?) @ 2017-01-19 10:58 ` Angelo Compagnucci 2017-01-19 11:06 ` Bartosz Golaszewski -1 siblings, 1 reply; 13+ messages in thread From: Angelo Compagnucci @ 2017-01-19 10:58 UTC (permalink / raw) To: Bartosz Golaszewski Cc: Linus Walleij, Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio Bartosz Golaszewski, 2017-01-19 11:10 GMT+01:00 Bartosz Golaszewski <bgolaszewski@baylibre.com>: > 2017-01-19 10:34 GMT+01:00 Linus Walleij <linus.walleij@linaro.org>: >> On Wed, Jan 18, 2017 at 4:48 PM, Bartosz Golaszewski >> <bgolaszewski@baylibre.com> wrote: >> >>> I'd like to announce the first release of libgpiod. The project >>> consists of a C library and a set of command-line tools for >>> controlling GPIOs over the new character device interface. >> >> Nice! >> >> Have you thought about adding bindings for higher order >> languages etc that I think can make GPIO programming a bliss? >> > > I have thought about soooo many things I could do, but the problem is > - as usual - time I can devote to this project. ;) Anyways: I'll > welcome any contribution, so if you'll happen to have some time to do > it, I'll surely include it. > >> I created some for Control Groups at a point, using ctypes: >> https://sourceforge.net/p/cgfreak/code/ci/master/tree/pylibcgroup.py >> > > FYI check out libsigrok - it generates python bindings from C++ using > swig - maybe this would be a good approach to decrease the amount of > work needed. I'd really like to help here, I have a bit of previous experience with python bindings to c and I don't think it's a tremendous amount of work. I'm planning to fork your project next weeks and trying to do something! > >> The point is not that Python would be so great (some think >> so) more that this kind of stuff makes GPIOs so much more >> accessible, apart from good old C. >> > > Yep, certainly agree. This is definitely a feature I'd like to have in > the future. > > Best regards, > Bartosz Golaszewski > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Profile: http://it.linkedin.com/in/compagnucciangelo ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: libgpiod v0.1: C library and command-line tools for controlling GPIOs 2017-01-19 10:58 ` Angelo Compagnucci @ 2017-01-19 11:06 ` Bartosz Golaszewski 0 siblings, 0 replies; 13+ messages in thread From: Bartosz Golaszewski @ 2017-01-19 11:06 UTC (permalink / raw) To: Angelo Compagnucci Cc: Linus Walleij, Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio 2017-01-19 11:58 GMT+01:00 Angelo Compagnucci <angelo.compagnucci@gmail.com>: > Bartosz Golaszewski, > > 2017-01-19 11:10 GMT+01:00 Bartosz Golaszewski <bgolaszewski@baylibre.com>: >> 2017-01-19 10:34 GMT+01:00 Linus Walleij <linus.walleij@linaro.org>: >>> On Wed, Jan 18, 2017 at 4:48 PM, Bartosz Golaszewski >>> <bgolaszewski@baylibre.com> wrote: >>> >>>> I'd like to announce the first release of libgpiod. The project >>>> consists of a C library and a set of command-line tools for >>>> controlling GPIOs over the new character device interface. >>> >>> Nice! >>> >>> Have you thought about adding bindings for higher order >>> languages etc that I think can make GPIO programming a bliss? >>> >> >> I have thought about soooo many things I could do, but the problem is >> - as usual - time I can devote to this project. ;) Anyways: I'll >> welcome any contribution, so if you'll happen to have some time to do >> it, I'll surely include it. >> >>> I created some for Control Groups at a point, using ctypes: >>> https://sourceforge.net/p/cgfreak/code/ci/master/tree/pylibcgroup.py >>> >> >> FYI check out libsigrok - it generates python bindings from C++ using >> swig - maybe this would be a good approach to decrease the amount of >> work needed. > > I'd really like to help here, I have a bit of previous experience with > python bindings to c and I don't think it's a tremendous amount of > work. > I'm planning to fork your project next weeks and trying to do something! > Great! I'll try to find some time to work on C++ bindings then. Thanks, Bartosz ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <CAMpxmJUHfo7FRzzx7MxdADyVMYZiSLEPCtCSDLkq540M1fZTkg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: libgpiod v0.1: C library and command-line tools for controlling GPIOs 2017-01-18 15:48 ` Bartosz Golaszewski @ 2017-01-19 14:05 ` Alexander Stein -1 siblings, 0 replies; 13+ messages in thread From: Alexander Stein @ 2017-01-19 14:05 UTC (permalink / raw) To: Bartosz Golaszewski Cc: Linus Walleij, Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio-u79uwXL29TY76Z2rM5mHXA Hi, On Wednesday 18 January 2017 16:48:08, Bartosz Golaszewski wrote: > I'd like to announce the first release of libgpiod. The project > consists of a C library and a set of command-line tools for > controlling GPIOs over the new character device interface. > > The tools support reading & setting values, keeping the lines > exported, finding GPIO lines by name, monitoring events etc. > > The source code can be found at: https://github.com/brgl/libgpiod Cool thing. thanks! One bug found: https://github.com/brgl/libgpiod/blob/master/src/tools/gpiomon.c#L31 shortopts is missing 's' so the following occurs: > gpiomon -l -r -s --num-events=1 gpiochip2 1 > gpiomon: invalid option -- 's' > gpiomon: try gpiomon --help > gpiomon -l -r --silent --num-events=1 gpiochip2 1 works as expected Best regards, Alexander -- Dipl.-Inf. Alexander Stein SYS TEC electronic GmbH alexander.stein-93q1YBGzJSMe9JSWTWOYM3xStJ4P+DSV@public.gmane.org Legal and Commercial Address: Am Windrad 2 08468 Heinsdorfergrund Germany Office: +49 (0) 3765 38600-0 Fax: +49 (0) 3765 38600-4100 Managing Directors: Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt; Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp Commercial Registry: Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010 ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: libgpiod v0.1: C library and command-line tools for controlling GPIOs @ 2017-01-19 14:05 ` Alexander Stein 0 siblings, 0 replies; 13+ messages in thread From: Alexander Stein @ 2017-01-19 14:05 UTC (permalink / raw) To: Bartosz Golaszewski Cc: Linus Walleij, Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio Hi, On Wednesday 18 January 2017 16:48:08, Bartosz Golaszewski wrote: > I'd like to announce the first release of libgpiod. The project > consists of a C library and a set of command-line tools for > controlling GPIOs over the new character device interface. > > The tools support reading & setting values, keeping the lines > exported, finding GPIO lines by name, monitoring events etc. > > The source code can be found at: https://github.com/brgl/libgpiod Cool thing. thanks! One bug found: https://github.com/brgl/libgpiod/blob/master/src/tools/gpiomon.c#L31 shortopts is missing 's' so the following occurs: > gpiomon -l -r -s --num-events=1 gpiochip2 1 > gpiomon: invalid option -- 's' > gpiomon: try gpiomon --help > gpiomon -l -r --silent --num-events=1 gpiochip2 1 works as expected Best regards, Alexander -- Dipl.-Inf. Alexander Stein SYS TEC electronic GmbH alexander.stein@systec-electronic.com Legal and Commercial Address: Am Windrad 2 08468 Heinsdorfergrund Germany Office: +49 (0) 3765 38600-0 Fax: +49 (0) 3765 38600-4100 Managing Directors: Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt; Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp Commercial Registry: Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010 ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: libgpiod v0.1: C library and command-line tools for controlling GPIOs 2017-01-19 14:05 ` Alexander Stein (?) @ 2017-01-19 14:12 ` Bartosz Golaszewski [not found] ` <CAMpxmJUAKOqcBQ=p9Y=wrFk7Ms=dVGCRDWhmiijuUMQ2-MAHug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> -1 siblings, 1 reply; 13+ messages in thread From: Bartosz Golaszewski @ 2017-01-19 14:12 UTC (permalink / raw) To: Alexander Stein Cc: Linus Walleij, Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio 2017-01-19 15:05 GMT+01:00 Alexander Stein <alexander.stein@systec-electronic.com>: > Hi, > > On Wednesday 18 January 2017 16:48:08, Bartosz Golaszewski wrote: >> I'd like to announce the first release of libgpiod. The project >> consists of a C library and a set of command-line tools for >> controlling GPIOs over the new character device interface. >> >> The tools support reading & setting values, keeping the lines >> exported, finding GPIO lines by name, monitoring events etc. >> >> The source code can be found at: https://github.com/brgl/libgpiod > > Cool thing. thanks! One bug found: > https://github.com/brgl/libgpiod/blob/master/src/tools/gpiomon.c#L31 > shortopts is missing 's' so the following occurs: >> gpiomon -l -r -s --num-events=1 gpiochip2 1 >> gpiomon: invalid option -- 's' >> gpiomon: try gpiomon --help > >> gpiomon -l -r --silent --num-events=1 gpiochip2 1 > works as expected Thanks, fixed in git. Best regards, Bartosz Golaszewski ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <CAMpxmJUAKOqcBQ=p9Y=wrFk7Ms=dVGCRDWhmiijuUMQ2-MAHug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: libgpiod v0.1: C library and command-line tools for controlling GPIOs 2017-01-19 14:12 ` Bartosz Golaszewski @ 2017-01-19 14:30 ` Alexander Stein 0 siblings, 0 replies; 13+ messages in thread From: Alexander Stein @ 2017-01-19 14:30 UTC (permalink / raw) To: Bartosz Golaszewski Cc: Linus Walleij, Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio-u79uwXL29TY76Z2rM5mHXA On Thursday 19 January 2017 15:12:43, Bartosz Golaszewski wrote: > 2017-01-19 15:05 GMT+01:00 Alexander Stein > > <alexander.stein-93q1YBGzJSMe9JSWTWOYM3xStJ4P+DSV@public.gmane.org>: > > Hi, > > > > On Wednesday 18 January 2017 16:48:08, Bartosz Golaszewski wrote: > >> I'd like to announce the first release of libgpiod. The project > >> consists of a C library and a set of command-line tools for > >> controlling GPIOs over the new character device interface. > >> > >> The tools support reading & setting values, keeping the lines > >> exported, finding GPIO lines by name, monitoring events etc. > >> > >> The source code can be found at: https://github.com/brgl/libgpiod > > > > Cool thing. thanks! One bug found: > > https://github.com/brgl/libgpiod/blob/master/src/tools/gpiomon.c#L31 > > > > shortopts is missing 's' so the following occurs: > >> gpiomon -l -r -s --num-events=1 gpiochip2 1 > >> gpiomon: invalid option -- 's' > >> gpiomon: try gpiomon --help > >> > >> gpiomon -l -r --silent --num-events=1 gpiochip2 1 > > > > works as expected > > Thanks, fixed in git. Thanks, also for defines of GPIOHANDLE_REQUEST_INPUT and friends you actually need kernel headers >=4.8. README.md says >=4.7 Best regards, Alexander -- Dipl.-Inf. Alexander Stein SYS TEC electronic GmbH alexander.stein-93q1YBGzJSMe9JSWTWOYM3xStJ4P+DSV@public.gmane.org Legal and Commercial Address: Am Windrad 2 08468 Heinsdorfergrund Germany Office: +49 (0) 3765 38600-0 Fax: +49 (0) 3765 38600-4100 Managing Directors: Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt; Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp Commercial Registry: Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010 ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: libgpiod v0.1: C library and command-line tools for controlling GPIOs @ 2017-01-19 14:30 ` Alexander Stein 0 siblings, 0 replies; 13+ messages in thread From: Alexander Stein @ 2017-01-19 14:30 UTC (permalink / raw) To: Bartosz Golaszewski Cc: Linus Walleij, Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio On Thursday 19 January 2017 15:12:43, Bartosz Golaszewski wrote: > 2017-01-19 15:05 GMT+01:00 Alexander Stein > > <alexander.stein@systec-electronic.com>: > > Hi, > > > > On Wednesday 18 January 2017 16:48:08, Bartosz Golaszewski wrote: > >> I'd like to announce the first release of libgpiod. The project > >> consists of a C library and a set of command-line tools for > >> controlling GPIOs over the new character device interface. > >> > >> The tools support reading & setting values, keeping the lines > >> exported, finding GPIO lines by name, monitoring events etc. > >> > >> The source code can be found at: https://github.com/brgl/libgpiod > > > > Cool thing. thanks! One bug found: > > https://github.com/brgl/libgpiod/blob/master/src/tools/gpiomon.c#L31 > > > > shortopts is missing 's' so the following occurs: > >> gpiomon -l -r -s --num-events=1 gpiochip2 1 > >> gpiomon: invalid option -- 's' > >> gpiomon: try gpiomon --help > >> > >> gpiomon -l -r --silent --num-events=1 gpiochip2 1 > > > > works as expected > > Thanks, fixed in git. Thanks, also for defines of GPIOHANDLE_REQUEST_INPUT and friends you actually need kernel headers >=4.8. README.md says >=4.7 Best regards, Alexander -- Dipl.-Inf. Alexander Stein SYS TEC electronic GmbH alexander.stein@systec-electronic.com Legal and Commercial Address: Am Windrad 2 08468 Heinsdorfergrund Germany Office: +49 (0) 3765 38600-0 Fax: +49 (0) 3765 38600-4100 Managing Directors: Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt; Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp Commercial Registry: Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010 ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: libgpiod v0.1: C library and command-line tools for controlling GPIOs 2017-01-19 14:30 ` Alexander Stein (?) @ 2017-01-19 14:59 ` Bartosz Golaszewski -1 siblings, 0 replies; 13+ messages in thread From: Bartosz Golaszewski @ 2017-01-19 14:59 UTC (permalink / raw) To: Alexander Stein Cc: Linus Walleij, Lars-Peter Clausen, linux-gpio, Jonathan Cameron, Geert Uytterhoeven, Alexandre Courbot, linux-iio 2017-01-19 15:30 GMT+01:00 Alexander Stein <alexander.stein@systec-electronic.com>: > On Thursday 19 January 2017 15:12:43, Bartosz Golaszewski wrote: >> 2017-01-19 15:05 GMT+01:00 Alexander Stein >> >> <alexander.stein@systec-electronic.com>: >> > Hi, >> > >> > On Wednesday 18 January 2017 16:48:08, Bartosz Golaszewski wrote: >> >> I'd like to announce the first release of libgpiod. The project >> >> consists of a C library and a set of command-line tools for >> >> controlling GPIOs over the new character device interface. >> >> >> >> The tools support reading & setting values, keeping the lines >> >> exported, finding GPIO lines by name, monitoring events etc. >> >> >> >> The source code can be found at: https://github.com/brgl/libgpiod >> > >> > Cool thing. thanks! One bug found: >> > https://github.com/brgl/libgpiod/blob/master/src/tools/gpiomon.c#L31 >> > >> > shortopts is missing 's' so the following occurs: >> >> gpiomon -l -r -s --num-events=1 gpiochip2 1 >> >> gpiomon: invalid option -- 's' >> >> gpiomon: try gpiomon --help >> >> >> >> gpiomon -l -r --silent --num-events=1 gpiochip2 1 >> > >> > works as expected >> >> Thanks, fixed in git. > > Thanks, also for defines of GPIOHANDLE_REQUEST_INPUT and friends you actually > need kernel headers >=4.8. README.md says >=4.7 > Fixed as well. Would you mind opening a github issue in the future to keep track of issues? Thanks, Bartosz Golaszewski ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2017-01-19 15:06 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-01-18 15:48 libgpiod v0.1: C library and command-line tools for controlling GPIOs Bartosz Golaszewski 2017-01-18 15:48 ` Bartosz Golaszewski 2017-01-19 9:34 ` Linus Walleij [not found] ` <CACRpkdbq5aFZZfNN1UxjrxTzsHQBdkLcz9LCx3BSp-JoirXR6A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2017-01-19 10:10 ` Bartosz Golaszewski 2017-01-19 10:10 ` Bartosz Golaszewski 2017-01-19 10:58 ` Angelo Compagnucci 2017-01-19 11:06 ` Bartosz Golaszewski [not found] ` <CAMpxmJUHfo7FRzzx7MxdADyVMYZiSLEPCtCSDLkq540M1fZTkg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2017-01-19 14:05 ` Alexander Stein 2017-01-19 14:05 ` Alexander Stein 2017-01-19 14:12 ` Bartosz Golaszewski [not found] ` <CAMpxmJUAKOqcBQ=p9Y=wrFk7Ms=dVGCRDWhmiijuUMQ2-MAHug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2017-01-19 14:30 ` Alexander Stein 2017-01-19 14:30 ` Alexander Stein 2017-01-19 14:59 ` Bartosz Golaszewski
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.