[PATCH v14 00/33] rcar-vin: Add Gen3 with media controller

[PATCH v14 00/33] rcar-vin: Add Gen3 with media controller

[Niklas Söderlund]

Hi,

This series adds Gen3 VIN support to rcar-vin driver for Renesas r8a7795,
r8a7796 and r8a77970. It is based on the media-tree and depends on
Fabrizio Castro patches as they touches the order of the compatible
strings in the documentation to reduce merge conflicts. The dependencies
are included in this series.

The driver is tested on Renesas H3 (r8a7795, ES2.0),
M3-W (r8a7796) together with the rcar-csi2 driver (posted separately and
not yet upstream) and the Salvator-X onboard ADV7482. It is also tested
on the V3M (r8a77970) on the Eagle board together with its expansion
board with a ADV7482 and out of tree patches for GMSL capture using the
max9286 and rdacm20 drivers.

It is possible to capture both CVBS and HDMI video streams,
v4l2-compliance passes with no errors and media-ctl can be used to
change the routing and formats for the different entities in the media
graph.

Gen2 compatibility is verified on Koelsch and no problems where found,
video can be captured just like before and v4l2-compliance passes
without errors or warnings just like before this series.

For convenience the series can be fetched from:

  git://git.ragnatech.se/linux rcar/vin/mc-v14

I have started on a very basic test suite for the VIN driver at:

  https://git.ragnatech.se/vin-tests

And as before the state of the driver and information about how to test
it can be found on the elinux wiki:

  http://elinux.org/R-Car/Tests:rcar-vin

* Changes since v13
- rvin_reset_format() always returns 0, make it a void function and
  update all call-sites no to check the return value.
- Simplify how the source, compose and crop geometry is reset in 
  rvin_reset_format(), no change except making the code more readable, 
  thanks Laurent for a good suggestion.
- Split two single line declaration of multiple variables to multiple 
  lines, removing constructs like 'crop->top = crop->left = 0;' into two 
  separate statements.
- Make crop and compose arguments to rvin_try_format() optional to avoid
  having to declare local variables in rvin_try_fmt_vid_cap() which are
  not used.
- Remove VNCSI_IFMD_DES2 define as the later versions of the datasheet 
  have been updated to remove the register as pointed out by Koji Matsuoka.
- Do not set the VNCSI_IFMD_DES2 bit in the VNCSI_IFMD register as that 
  bit have been removed from later versions of the datasheet.
- Spelling dose -> does
- Add review tag from Laurent, big thanks!

* Changes from v12
- Rebase to latest media-tree/master changed a 'return ret' to a 'goto
  out' in rvin_start_streaming() to take recent changes to the VIN
  driver into account.
- Moved field != V4L2_FIELD_ANY in 'rcar-vin: set a default field to
  fallback on' check from a later commit 'rcar-vin: simplify how formats
  are set and reset' in the series. This is to avoid ignoring the field
  returned from the sensor if FIELD_ANY was requested by the user. This
  was only a problem between this change and a few patches later, but
  better to fix it now. Reported by Hans, thanks for spotting this.
- Fix spelling.
- Add review tags from Hans.

* Changes since v11
- Rewrote commit message for '[PATCH v11 22/32] rcar-vin: force default
  colorspace for media centric mode'. Also set fixed values for
  xfer_func, quantization and ycbcr_enc.
- Reorderd filed order in struct rvin_group_route.
- Renamed chan to channel in struct rvin_group_route.
- Rework 'rcar-vin: read subdevice format for crop only when
  needed' into 'rcar-vin: simplify how formats are set and reset'.
- Keep caching the source dimensions and drop all changes to
  rvin_g_selection() and rvin_s_selection().
- Inline rvin_get_vin_format_from_source() into rvin_reset_format()
  which now is the only user left.
- Add patch to cache the video standard instead of reading it at stream
  on.
- Fix error labels in rvin_mc_open().
- Fixed spelling in commit messages and comment, thanks Laurent!
- Added reviewed tags from Laurent, Thanks!

* Changes since v10
- Corrected spelling in comments and commit messages.
- Reworked 'rcar-vin: read subdevice format for crop only when needed'
  to only get the source format once per operation.
- Moved some patches around to make it easier to review, moved:
    - rcar-vin: set a default field to fallback on
    - rcar-vin: fix handling of single field frames (top, bottom and alternate fields)
    - rcar-vin: update bytesperline and sizeimage calculation
    - rcar-vin: break out format alignment and checking
    - rcar-vin: update pixelformat check for M1
  Before:
    - rcar-vin: read subdevice format for crop only when needed
- Rename variable 'code' to 'mbus_code' in struct rvin_dev.
- Add comment describing no locking is needed in
  rvin_set_channel_routing().
- Check return value of pm_runtime_get_sync() in
  rvin_set_channel_routing().
- Rework 'rcar-vin: add check for colorspace' to not try to check the
  format, instead force a default format. This should be revisited once
  either v4l2-compliance or v4l2 framework changes are worked out to
  allow for MC centric drivers to validate user supplied colorspace.
- Add error checking for pm_runtime_get_sync() and
  v4l2_pipeline_pm_use().
- Change mutex_lock() to mutex_lock_interruptible() in rvin_mc_open().
- Rewrote documentation for struct rvin_group_route.
- Rename rvin_mc_parse_v4l2() to rvin_mc_parse_of_endpoint().
- Reword error messages in rvin_mc_parse_of_endpoint().
- Removed unneeded loop in rvin_mc_parse_of_endpoint().
- Remove check !is_media_entity_v4l2_subdev() in
  rvin_group_entity_to_csi_id().
- Add documentation for the algorithm used to figure out if a link can
  be enabled or not in rvin_group_link_notify().
- Break out format validation to rvin_mc_validate_format().
- Include two DT documentation patches from Fabrizio Castro which
  previously where mentioned as the only dependency for this series.
- Added reviewed tags from Laurent, Thanks!

* Changes since v9
- Fixed mistakes in the device tree description pointed out by  Laurent.
    - GenX -> GenX platforms
    - portX -> port X
    - Explicitly state the on Gen3 platforms port 0 can only describe
      one endpoint and that only VIN instances connected to external
      pins should have a port 0 node.
    - s/which is/connected to/ in he endpoint description for Gen3
      platforms.
- Update some poorly written commit messages.
- Moved the digital subdevice attach and detach code to two separate
  functions to increase readability.
- Rename the struct rvin_info member chip to model to better describe
  its purpose.
- Change the video name from "rcar_vin e6ef0000.video" to "VINx output"
  where x is the VIN id.
- Dropped patch 'rcar-vin: do not allow changing scaling and composing
  while streaming' as it removed Gen2 functionality which is valid as
  pointed out by Laurent.
- Rename rvin_get_sd_format() to rvin_get_source_format() and change its
  parameter from struct v4l2_pix_format* to struct v4l2_mbus_framefmt*.
- Clarified commit message and add a few move comments to 'rcar-vin: fix
  handling of single field frames (top, bottom and alternate fields'.
- Update documentation for struct rvin_dev fields mbus_cfg and code.
- Fix argument in VNCSI_IFMD_CSI_CHSEL macro.
- Renamed rvin_set_chsel() to rvin_set_channel_routing().
- Restore the VNMC register after changing CHSEL setting.
- Broke patch 'rcar-vin: break out format alignment and checking' into
  three parts to ease review.
- Add new patch to introduce a default field.
- Only include media/v4l2-mc.h in the .c files that needs it and not in
  rcar-vin.h.
- Rename rvin_group_allocate() rvin_group_get()
- Rename rvin_group_delete() rvin_group_put()
- Updated error message "VIN number %d already occupied\n" to "Duplicate
  renesas,id property value %u\n".
- Removed dev_dbg messages which only where useful during development.
- Dropped patch '[PATCH v9 10/28] rcar-vin: do not reset crop and
  compose when setting format' as it introduces a regression on Gen2.
- Inline rvin_group_read_id() and rvin_group_add_vin() into
  rvin_group_get().
- Define static variables at the top of rcar-core.c.
- Fix potential deadlock in rvin_group_get().
- Set media device model name to the VIN module name.
- Set media device model to matched complicity string.
- Do not use a 2 dimensional sparse array for chsel values in struct
  rvin_info, instead use a flat array and store VIN and CHSEL value
  inside each array item.
- Reworked DT parsing code to make use of the new
  v4l2_async_notifier_parse_fwnode_endpoints_by_port() helper removing a
  lot of iffy custom parsing code.
- Rework how CHSEL value is calculated in the link notifier callback.
  Using a bitmap of possible values instead of looping over an array
  turned out great reducing both LoC and increasing readability of the
  code which was a bit difficult before. It also reduced to memory
  needed to contain the static routing information.
- Verify the media bus pixel code when starting a stream.
- Take the media device graph lock when figuring out and starting a
  stream so not to race between simultaneous stream start from multiple
  rcar-vin instances as they might share common subdevices.
- Added review tags from Laurent.
- Dropped tags from patches that where changed more then just correcting
  spelling or other gramma errors.

* Changes since v8
- Fixed issue in rvin_group_init() where rvin_group_update_links() was
  called, but after moving the video device registration to the
  complete() callback this is now invalid.
- Fixed spelling in commit messages.
- Added review and acks from Hans, Kieran and Rob.

* Changes since v7
- Dropped '[PATCH v7 02/25] rcar-vin: register the video device at probe time'
- Add patch which renames four badly name functions. Some of the
  renaming was in v7 part of the dropped patch 02/25. Make it a own
  patch and rename all badly named functions in one patch.
- Add patch to replace part of the functionality of the dropped patch v7
  02/25. The new patch keeps the subdevice (un)registration calls in the
  async callbacks bind() and unbind() but moves the direct subdevice
  initialization which only is used on Gen2 from the Gen2 and Gen3
  shared rvin_v4l2_register().
- Add patch to enable Renesas V3M (r8a77970)
- Patch 'rcar-vin: parse Gen3 OF and setup media graph' have had code
  additions since v7 since it now registers the video devices in the
  async complete() callback instead of at probe time as an effect of
  dropping v7 02/25.
  - The complete() callback now register all video devices.
  - The unbind() callback now unregister all video devices.
  - A new member '*notifier' is added to struct rvin_group which keeps
    track of which rcar-vin instance have registered its notifier on the
    groups behalf.
  For the reason above all Reviewed-by tags have been dropped for this
  patch.
- Replaced all kernel messages which used of_node_full_name() as now
  only returns the basename and not till full path, thanks Geert.

    printk("%s", of_node_full_name(ep)); -> printk("%pOF", ep);

- Added Reviewed-by tags from Hans, big thanks!

* Changes since v6
- Rebase ontop of latest media-tree which brings in the use of the
  fwnode async helpers for Gen2.
- Updated DT binding documentation, thanks Laurent for very helpful
  input!
- Removed help text which where copied in from v4l2_ctrl_handler_init()
  documentation when moving that code block, this was a residue from the
  soc_camera conversion and should have been removed at that time.
- Removed bad check of tvnorms which disables IOCTLs if it's not set,
  this was a residue from soc_camera conversion and have use in the
  current driver.
- Moved all subdevice initialization from complete to bound handler
  while improving the unbind handler. With this move all operations of
  the ctrl_handler from the subdevice is handled in either bound or
  unbind removing races pointed out by Laurent.
- Renamed rvin_v4l2_probe() -> rvin_v4l2_register() and
  rvin_v4l2_remove() -> rvin_v4l2_unregister().
- Fold rvin_mbus_supported() into its only caller.
- Sort compatible string entries in ascending order.
- Improved documentation for struct rvin_group_chsel.
- Clarify comment in rvin_group_csi_pad_to_chan().
- Make use of of_device_get_match_data() as suggested by Geert.
- Fixed spelling mistakes.
- Added review tags from Hans.

* Changes since v5
- Extract and make use of common format checking for both Gen2 and Gen3.
- Assign pad at declaration time in rvin_get_sd_format()
- Always call pm_runtime_{get_sync,put}() and v4l2_pipeline_pm_use()
  when opening/closing a video device, remove the check of
  v4l2_fh_is_singular_file().
- Make rvin_set_chsel() return void instead of int since it always
  return 0.
- Simplify the VIN group allocator functions.
- Make the group notifier callbacks and setup more robust.
- Moved the video device registration back to probe time.
- Add H3 ES2.0 support.
- Fix handling of single field formats (top, bottom, alternate) as this
  was obviously wrong before but hidden by the Gen2 scaler support.
- Added review tags from Kieran.

* Changes since v4 (Not posted to ML)
- Updated to the new fwnode functions.
- Moved the registration of the video devices to the async notification
  callback.

* Changes since v3
- Only add neighboring subdevices to the async notifier. Instead of
  parsing the whole OF graph depend on incremental async subnotifier to
  discover the whole pipeline. This is needed to support arbitrarily
  long graphs and support the new ADV7482 prototype driver which Kieran
  is working on.
- Fix warning from lockdep, reported by Kieran.
- Fix commit messages from feedback from Sergei, thanks.
- Fix chip info an OF device ids sorting order, thanks Geert.
- Use subdev->of_node instead of subdev->dev->of_node, thanks Kieran.

* Changes since v2
- Do not try to control the subdevices in the media graph from the rcar-vin
  driver. Have user-space configure to format in the pipeline instead.
- Add link validation before starting the stream.
- Rework on how the subdevices are and the video node behave by defining
  specific V4L2 operations for the MC mode of operation, this simplified
  the driver quit a bit, thanks Laurent!
- Add a new 'renesas,id' DT property which is needed to to be able to
  keep the VIN to CSI-2 routing table inside the driver. Previously this
  information was taken from the CSI-2 DT node which is obviously the
  wrong way to do things. Thanks Laurent for pointing this out.
- Fixed a memory leek in the group allocator function.
- Return -EMLINK instead of -EBUSY if a MC link is not possible given
  the current routing setup.
- Add comments to clarify that the 4 channels from the CSI-2 node is not
  directly related to CSI-2 virtual channels, the CSI-2 node can output
  any VC on any of its output channels.

* Changes since v1
- Remove unneeded casts as pointed out by Geert.
- Fix spelling and DT documentation as pointed out by Geert and Sergei,
  thanks!
- Refresh patch 2/32 with an updated version, thanks Sakari for pointing
  this out.
- Add Sakaris Ack to patch 1/32.
- Rebase on top of v4.9-rc1 instead of v4.9-rc3 to ease integration
  testing together with renesas-drivers tree.

Fabrizio Castro (2):
  dt-bindings: media: rcar_vin: Reverse SoC part number list
  dt-bindings: media: rcar_vin: add device tree support for r8a774[35]

Niklas Söderlund (31):
  rcar-vin: add Gen3 devicetree bindings documentation
  rcar-vin: rename poorly named initialize and cleanup functions
  rcar-vin: unregister video device on driver removal
  rcar-vin: move subdevice handling to async callbacks
  rcar-vin: move model information to own struct
  rcar-vin: move max width and height information to chip information
  rcar-vin: move functions regarding scaling
  rcar-vin: all Gen2 boards can scale simplify logic
  rcar-vin: set a default field to fallback on
  rcar-vin: fix handling of single field frames (top, bottom and
    alternate fields)
  rcar-vin: update bytesperline and sizeimage calculation
  rcar-vin: align pixelformat check
  rcar-vin: break out format alignment and checking
  rcar-vin: simplify how formats are set and reset
  rcar-vin: cache video standard
  rcar-vin: move media bus configuration to struct rvin_dev
  rcar-vin: enable Gen3 hardware configuration
  rcar-vin: add function to manipulate Gen3 chsel value
  rcar-vin: add flag to switch to media controller mode
  rcar-vin: use different v4l2 operations in media controller mode
  rcar-vin: force default colorspace for media centric mode
  rcar-vin: prepare for media controller mode initialization
  rcar-vin: add group allocator functions
  rcar-vin: change name of video device
  rcar-vin: add chsel information to rvin_info
  rcar-vin: parse Gen3 OF and setup media graph
  rcar-vin: add link notify for Gen3
  rcar-vin: extend {start,stop}_streaming to work with media controller
  rcar-vin: enable support for r8a7795
  rcar-vin: enable support for r8a7796
  rcar-vin: enable support for r8a77970

 .../devicetree/bindings/media/rcar_vin.txt         | 137 ++-
 drivers/media/platform/rcar-vin/Kconfig            |   2 +-
 drivers/media/platform/rcar-vin/rcar-core.c        | 962 +++++++++++++++++++--
 drivers/media/platform/rcar-vin/rcar-dma.c         | 783 ++++++++++-------
 drivers/media/platform/rcar-vin/rcar-v4l2.c        | 484 ++++++-----
 drivers/media/platform/rcar-vin/rcar-vin.h         | 146 +++-
 6 files changed, 1907 insertions(+), 607 deletions(-)

-- 
2.16.2

[PATCH v14 01/33] dt-bindings: media: rcar_vin: Reverse SoC part number list

[Niklas Söderlund]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Change the sorting of the part numbers from descending to ascending to
match with other documentation.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 Documentation/devicetree/bindings/media/rcar_vin.txt | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 1ce7ff9449c556d9..d99b6f5dee418056 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -6,14 +6,14 @@ family of devices. The current blocks are always slaves and suppot one input
 channel which can be either RGB, YUYV or BT656.
 
  - compatible: Must be one or more of the following
-   - "renesas,vin-r8a7795" for the R8A7795 device
-   - "renesas,vin-r8a7794" for the R8A7794 device
-   - "renesas,vin-r8a7793" for the R8A7793 device
-   - "renesas,vin-r8a7792" for the R8A7792 device
-   - "renesas,vin-r8a7791" for the R8A7791 device
-   - "renesas,vin-r8a7790" for the R8A7790 device
-   - "renesas,vin-r8a7779" for the R8A7779 device
    - "renesas,vin-r8a7778" for the R8A7778 device
+   - "renesas,vin-r8a7779" for the R8A7779 device
+   - "renesas,vin-r8a7790" for the R8A7790 device
+   - "renesas,vin-r8a7791" for the R8A7791 device
+   - "renesas,vin-r8a7792" for the R8A7792 device
+   - "renesas,vin-r8a7793" for the R8A7793 device
+   - "renesas,vin-r8a7794" for the R8A7794 device
+   - "renesas,vin-r8a7795" for the R8A7795 device
    - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 compatible device.
    - "renesas,rcar-gen3-vin" for a generic R-Car Gen3 compatible device.
 
-- 
2.16.2

[PATCH v14 02/33] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]

[Niklas Söderlund]

From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

Add compatible strings for r8a7743 and r8a7745. No driver change
is needed as "renesas,rcar-gen2-vin" will activate the right code.
However, it is good practice to document compatible strings for the
specific SoC as this allows SoC specific changes to the driver if
needed, in addition to document SoC support and therefore allow
checkpatch.pl to validate compatible string values.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 Documentation/devicetree/bindings/media/rcar_vin.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index d99b6f5dee418056..4c76d82905c9d3b8 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -6,6 +6,8 @@ family of devices. The current blocks are always slaves and suppot one input
 channel which can be either RGB, YUYV or BT656.
 
  - compatible: Must be one or more of the following
+   - "renesas,vin-r8a7743" for the R8A7743 device
+   - "renesas,vin-r8a7745" for the R8A7745 device
    - "renesas,vin-r8a7778" for the R8A7778 device
    - "renesas,vin-r8a7779" for the R8A7779 device
    - "renesas,vin-r8a7790" for the R8A7790 device
@@ -14,7 +16,8 @@ channel which can be either RGB, YUYV or BT656.
    - "renesas,vin-r8a7793" for the R8A7793 device
    - "renesas,vin-r8a7794" for the R8A7794 device
    - "renesas,vin-r8a7795" for the R8A7795 device
-   - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 compatible device.
+   - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
+     device.
    - "renesas,rcar-gen3-vin" for a generic R-Car Gen3 compatible device.
 
    When compatible with the generic version nodes must list the
-- 
2.16.2

[PATCH v14 03/33] rcar-vin: add Gen3 devicetree bindings documentation

[Niklas Söderlund]

Document the devicetree bindings for the CSI-2 inputs available on Gen3.

There is a need to add a custom property 'renesas,id' and to define
which CSI-2 input is described in which endpoint under the port@1 node.
This information is needed since there are a set of predefined routes
between each VIN and CSI-2 block. This routing table will be kept
inside the driver but in order for it to act on it it must know which
VIN and CSI-2 is which.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 .../devicetree/bindings/media/rcar_vin.txt         | 118 ++++++++++++++++++---
 1 file changed, 106 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 4c76d82905c9d3b8..ba31431d4b1fbdbb 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -2,8 +2,12 @@ Renesas R-Car Video Input driver (rcar_vin)
 -------------------------------------------
 
 The rcar_vin device provides video input capabilities for the Renesas R-Car
-family of devices. The current blocks are always slaves and suppot one input
-channel which can be either RGB, YUYV or BT656.
+family of devices.
+
+Each VIN instance has a single parallel input that supports RGB and YUV video,
+with both external synchronization and BT.656 synchronization for the latter.
+Depending on the instance the VIN input is connected to external SoC pins, or
+on Gen3 platforms to a CSI-2 receiver.
 
  - compatible: Must be one or more of the following
    - "renesas,vin-r8a7743" for the R8A7743 device
@@ -16,6 +20,8 @@ channel which can be either RGB, YUYV or BT656.
    - "renesas,vin-r8a7793" for the R8A7793 device
    - "renesas,vin-r8a7794" for the R8A7794 device
    - "renesas,vin-r8a7795" for the R8A7795 device
+   - "renesas,vin-r8a7796" for the R8A7796 device
+   - "renesas,vin-r8a77970" for the R8A77970 device
    - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
      device.
    - "renesas,rcar-gen3-vin" for a generic R-Car Gen3 compatible device.
@@ -31,21 +37,38 @@ channel which can be either RGB, YUYV or BT656.
 Additionally, an alias named vinX will need to be created to specify
 which video input device this is.
 
-The per-board settings:
+The per-board settings Gen2 platforms:
  - port sub-node describing a single endpoint connected to the vin
    as described in video-interfaces.txt[1]. Only the first one will
    be considered as each vin interface has one input port.
 
-   These settings are used to work out video input format and widths
-   into the system.
+The per-board settings Gen3 platforms:
 
+Gen3 platforms can support both a single connected parallel input source
+from external SoC pins (port0) and/or multiple parallel input sources
+from local SoC CSI-2 receivers (port1) depending on SoC.
 
-Device node example
--------------------
+- renesas,id - ID number of the VIN, VINx in the documentation.
+- ports
+    - port 0 - sub-node describing a single endpoint connected to the VIN
+      from external SoC pins described in video-interfaces.txt[1].
+      Describing more then one endpoint in port 0 is invalid. Only VIN
+      instances that are connected to external pins should have port 0.
+    - port 1 - sub-nodes describing one or more endpoints connected to
+      the VIN from local SoC CSI-2 receivers. The endpoint numbers must
+      use the following schema.
 
-	aliases {
-	       vin0 = &vin0;
-	};
+        - Endpoint 0 - sub-node describing the endpoint connected to CSI20
+        - Endpoint 1 - sub-node describing the endpoint connected to CSI21
+        - Endpoint 2 - sub-node describing the endpoint connected to CSI40
+        - Endpoint 3 - sub-node describing the endpoint connected to CSI41
+
+Device node example for Gen2 platforms
+--------------------------------------
+
+        aliases {
+                vin0 = &vin0;
+        };
 
         vin0: vin@e6ef0000 {
                 compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
@@ -55,8 +78,8 @@ Device node example
                 status = "disabled";
         };
 
-Board setup example (vin1 composite video input)
-------------------------------------------------
+Board setup example for Gen2 platforms (vin1 composite video input)
+-------------------------------------------------------------------
 
 &i2c2   {
         status = "okay";
@@ -95,6 +118,77 @@ Board setup example (vin1 composite video input)
         };
 };
 
+Device node example for Gen3 platforms
+--------------------------------------
 
+        vin0: video@e6ef0000 {
+                compatible = "renesas,vin-r8a7795";
+                reg = <0 0xe6ef0000 0 0x1000>;
+                interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cpg CPG_MOD 811>;
+                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                resets = <&cpg 811>;
+                renesas,id = <0>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@1 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+
+                                reg = <1>;
+
+                                vin0csi20: endpoint@0 {
+                                        reg = <0>;
+                                        remote-endpoint= <&csi20vin0>;
+                                };
+                                vin0csi21: endpoint@1 {
+                                        reg = <1>;
+                                        remote-endpoint= <&csi21vin0>;
+                                };
+                                vin0csi40: endpoint@2 {
+                                        reg = <2>;
+                                        remote-endpoint= <&csi40vin0>;
+                                };
+                        };
+                };
+        };
+
+        csi20: csi2@fea80000 {
+                compatible = "renesas,r8a7795-csi2";
+                reg = <0 0xfea80000 0 0x10000>;
+                interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cpg CPG_MOD 714>;
+                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+                resets = <&cpg 714>;
+
+                ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                                reg = <0>;
+                                csi20_in: endpoint {
+                                        clock-lanes = <0>;
+                                        data-lanes = <1>;
+                                        remote-endpoint = <&adv7482_txb>;
+                                };
+                        };
+
+                        port@1 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+
+                                reg = <1>;
+
+                                csi20vin0: endpoint@0 {
+                                        reg = <0>;
+                                        remote-endpoint = <&vin0csi20>;
+                                };
+                        };
+                };
+        };
 
 [1] video-interfaces.txt common video media interface
-- 
2.16.2

[PATCH v14 04/33] rcar-vin: rename poorly named initialize and cleanup functions

[Niklas Söderlund]

The functions to register and unregister the hardware and video device
where poorly named from the start. Rename them to better describe their
intended function.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 10 +++++-----
 drivers/media/platform/rcar-vin/rcar-dma.c  |  6 +++---
 drivers/media/platform/rcar-vin/rcar-v4l2.c |  4 ++--
 drivers/media/platform/rcar-vin/rcar-vin.h  |  8 ++++----
 4 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index f1fc7978d6d1523d..2bedf20abcf3ca07 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -93,7 +93,7 @@ static int rvin_digital_notify_complete(struct v4l2_async_notifier *notifier)
 		return ret;
 	}
 
-	return rvin_v4l2_probe(vin);
+	return rvin_v4l2_register(vin);
 }
 
 static void rvin_digital_notify_unbind(struct v4l2_async_notifier *notifier,
@@ -103,7 +103,7 @@ static void rvin_digital_notify_unbind(struct v4l2_async_notifier *notifier,
 	struct rvin_dev *vin = notifier_to_vin(notifier);
 
 	vin_dbg(vin, "unbind digital subdev %s\n", subdev->name);
-	rvin_v4l2_remove(vin);
+	rvin_v4l2_unregister(vin);
 	vin->digital->subdev = NULL;
 }
 
@@ -245,7 +245,7 @@ static int rcar_vin_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	ret = rvin_dma_probe(vin, irq);
+	ret = rvin_dma_register(vin, irq);
 	if (ret)
 		return ret;
 
@@ -260,7 +260,7 @@ static int rcar_vin_probe(struct platform_device *pdev)
 
 	return 0;
 error:
-	rvin_dma_remove(vin);
+	rvin_dma_unregister(vin);
 	v4l2_async_notifier_cleanup(&vin->notifier);
 
 	return ret;
@@ -275,7 +275,7 @@ static int rcar_vin_remove(struct platform_device *pdev)
 	v4l2_async_notifier_unregister(&vin->notifier);
 	v4l2_async_notifier_cleanup(&vin->notifier);
 
-	rvin_dma_remove(vin);
+	rvin_dma_unregister(vin);
 
 	return 0;
 }
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 4a40e6ad1be7ed95..2aae3ca54eabac01 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -1087,14 +1087,14 @@ static const struct vb2_ops rvin_qops = {
 	.wait_finish		= vb2_ops_wait_finish,
 };
 
-void rvin_dma_remove(struct rvin_dev *vin)
+void rvin_dma_unregister(struct rvin_dev *vin)
 {
 	mutex_destroy(&vin->lock);
 
 	v4l2_device_unregister(&vin->v4l2_dev);
 }
 
-int rvin_dma_probe(struct rvin_dev *vin, int irq)
+int rvin_dma_register(struct rvin_dev *vin, int irq)
 {
 	struct vb2_queue *q = &vin->queue;
 	int i, ret;
@@ -1142,7 +1142,7 @@ int rvin_dma_probe(struct rvin_dev *vin, int irq)
 
 	return 0;
 error:
-	rvin_dma_remove(vin);
+	rvin_dma_unregister(vin);
 
 	return ret;
 }
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index b479b882da12f62d..178aecc94962abe2 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -839,7 +839,7 @@ static const struct v4l2_file_operations rvin_fops = {
 	.read		= vb2_fop_read,
 };
 
-void rvin_v4l2_remove(struct rvin_dev *vin)
+void rvin_v4l2_unregister(struct rvin_dev *vin)
 {
 	v4l2_info(&vin->v4l2_dev, "Removing %s\n",
 		  video_device_node_name(&vin->vdev));
@@ -866,7 +866,7 @@ static void rvin_notify(struct v4l2_subdev *sd,
 	}
 }
 
-int rvin_v4l2_probe(struct rvin_dev *vin)
+int rvin_v4l2_register(struct rvin_dev *vin)
 {
 	struct video_device *vdev = &vin->vdev;
 	struct v4l2_subdev *sd = vin_to_source(vin);
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 95897127cc410d4f..385243e3d4da130b 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -153,11 +153,11 @@ struct rvin_dev {
 #define vin_warn(d, fmt, arg...)	dev_warn(d->dev, fmt, ##arg)
 #define vin_err(d, fmt, arg...)		dev_err(d->dev, fmt, ##arg)
 
-int rvin_dma_probe(struct rvin_dev *vin, int irq);
-void rvin_dma_remove(struct rvin_dev *vin);
+int rvin_dma_register(struct rvin_dev *vin, int irq);
+void rvin_dma_unregister(struct rvin_dev *vin);
 
-int rvin_v4l2_probe(struct rvin_dev *vin);
-void rvin_v4l2_remove(struct rvin_dev *vin);
+int rvin_v4l2_register(struct rvin_dev *vin);
+void rvin_v4l2_unregister(struct rvin_dev *vin);
 
 const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
 
-- 
2.16.2

[PATCH v14 05/33] rcar-vin: unregister video device on driver removal

[Niklas Söderlund]

If the video device was registered by the complete() callback it should
be unregistered when a device is unbound from the driver. Protect from
printing an uninitialized video device node name by adding a check in
rvin_v4l2_unregister() to identify that the video device is registered.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 2 ++
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 2bedf20abcf3ca07..47f06acde2e698f2 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -272,6 +272,8 @@ static int rcar_vin_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(&pdev->dev);
 
+	rvin_v4l2_unregister(vin);
+
 	v4l2_async_notifier_unregister(&vin->notifier);
 	v4l2_async_notifier_cleanup(&vin->notifier);
 
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 178aecc94962abe2..32a658214f48fa49 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -841,6 +841,9 @@ static const struct v4l2_file_operations rvin_fops = {
 
 void rvin_v4l2_unregister(struct rvin_dev *vin)
 {
+	if (!video_is_registered(&vin->vdev))
+		return;
+
 	v4l2_info(&vin->v4l2_dev, "Removing %s\n",
 		  video_device_node_name(&vin->vdev));
 
-- 
2.16.2

[PATCH v14 06/33] rcar-vin: move subdevice handling to async callbacks

[Niklas Söderlund]

In preparation for Gen3 support move the subdevice initialization and
clean up from rvin_v4l2_{register,unregister}() directly to the async
callbacks. This simplifies the addition of Gen3 support as the
rvin_v4l2_register() can be shared for both Gen2 and Gen3 while direct
subdevice control are only used on Gen2.

While moving this code drop a large comment which is copied from the
framework documentation and fold rvin_mbus_supported() into its only
caller. Also move the initialization and cleanup code to separate
functions to increase readability.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>

---

* Changes since v12
- 'shuld' -> should in comment to rvin_digital_subdevice_attach().
- Add review tag from Hans.
---
 drivers/media/platform/rcar-vin/rcar-core.c | 108 +++++++++++++++++++---------
 drivers/media/platform/rcar-vin/rcar-v4l2.c |  35 ---------
 2 files changed, 74 insertions(+), 69 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 47f06acde2e698f2..64daf92bc66dd81b 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -46,46 +46,88 @@ static int rvin_find_pad(struct v4l2_subdev *sd, int direction)
 	return -EINVAL;
 }
 
-static bool rvin_mbus_supported(struct rvin_graph_entity *entity)
+/* The vin lock should be held when calling the subdevice attach and detach */
+static int rvin_digital_subdevice_attach(struct rvin_dev *vin,
+					 struct v4l2_subdev *subdev)
 {
-	struct v4l2_subdev *sd = entity->subdev;
 	struct v4l2_subdev_mbus_code_enum code = {
 		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
 	};
+	int ret;
 
+	/* Find source and sink pad of remote subdevice */
+	ret = rvin_find_pad(subdev, MEDIA_PAD_FL_SOURCE);
+	if (ret < 0)
+		return ret;
+	vin->digital->source_pad = ret;
+
+	ret = rvin_find_pad(subdev, MEDIA_PAD_FL_SINK);
+	vin->digital->sink_pad = ret < 0 ? 0 : ret;
+
+	/* Find compatible subdevices mbus format */
+	vin->digital->code = 0;
 	code.index = 0;
-	code.pad = entity->source_pad;
-	while (!v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code)) {
+	code.pad = vin->digital->source_pad;
+	while (!vin->digital->code &&
+	       !v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL, &code)) {
 		code.index++;
 		switch (code.code) {
 		case MEDIA_BUS_FMT_YUYV8_1X16:
 		case MEDIA_BUS_FMT_UYVY8_2X8:
 		case MEDIA_BUS_FMT_UYVY10_2X10:
 		case MEDIA_BUS_FMT_RGB888_1X24:
-			entity->code = code.code;
-			return true;
+			vin->digital->code = code.code;
+			vin_dbg(vin, "Found media bus format for %s: %d\n",
+				subdev->name, vin->digital->code);
+			break;
 		default:
 			break;
 		}
 	}
 
-	return false;
-}
-
-static int rvin_digital_notify_complete(struct v4l2_async_notifier *notifier)
-{
-	struct rvin_dev *vin = notifier_to_vin(notifier);
-	int ret;
-
-	/* Verify subdevices mbus format */
-	if (!rvin_mbus_supported(vin->digital)) {
+	if (!vin->digital->code) {
 		vin_err(vin, "Unsupported media bus format for %s\n",
-			vin->digital->subdev->name);
+			subdev->name);
 		return -EINVAL;
 	}
 
-	vin_dbg(vin, "Found media bus format for %s: %d\n",
-		vin->digital->subdev->name, vin->digital->code);
+	/* Read tvnorms */
+	ret = v4l2_subdev_call(subdev, video, g_tvnorms, &vin->vdev.tvnorms);
+	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
+		return ret;
+
+	/* Add the controls */
+	ret = v4l2_ctrl_handler_init(&vin->ctrl_handler, 16);
+	if (ret < 0)
+		return ret;
+
+	ret = v4l2_ctrl_add_handler(&vin->ctrl_handler, subdev->ctrl_handler,
+				    NULL);
+	if (ret < 0) {
+		v4l2_ctrl_handler_free(&vin->ctrl_handler);
+		return ret;
+	}
+
+	vin->vdev.ctrl_handler = &vin->ctrl_handler;
+
+	vin->digital->subdev = subdev;
+
+	return 0;
+}
+
+static void rvin_digital_subdevice_detach(struct rvin_dev *vin)
+{
+	rvin_v4l2_unregister(vin);
+	v4l2_ctrl_handler_free(&vin->ctrl_handler);
+
+	vin->vdev.ctrl_handler = NULL;
+	vin->digital->subdev = NULL;
+}
+
+static int rvin_digital_notify_complete(struct v4l2_async_notifier *notifier)
+{
+	struct rvin_dev *vin = notifier_to_vin(notifier);
+	int ret;
 
 	ret = v4l2_device_register_subdev_nodes(&vin->v4l2_dev);
 	if (ret < 0) {
@@ -103,8 +145,10 @@ static void rvin_digital_notify_unbind(struct v4l2_async_notifier *notifier,
 	struct rvin_dev *vin = notifier_to_vin(notifier);
 
 	vin_dbg(vin, "unbind digital subdev %s\n", subdev->name);
-	rvin_v4l2_unregister(vin);
-	vin->digital->subdev = NULL;
+
+	mutex_lock(&vin->lock);
+	rvin_digital_subdevice_detach(vin);
+	mutex_unlock(&vin->lock);
 }
 
 static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
@@ -114,33 +158,27 @@ static int rvin_digital_notify_bound(struct v4l2_async_notifier *notifier,
 	struct rvin_dev *vin = notifier_to_vin(notifier);
 	int ret;
 
+	mutex_lock(&vin->lock);
+	ret = rvin_digital_subdevice_attach(vin, subdev);
+	mutex_unlock(&vin->lock);
+	if (ret)
+		return ret;
+
 	v4l2_set_subdev_hostdata(subdev, vin);
 
-	/* Find source and sink pad of remote subdevice */
-
-	ret = rvin_find_pad(subdev, MEDIA_PAD_FL_SOURCE);
-	if (ret < 0)
-		return ret;
-	vin->digital->source_pad = ret;
-
-	ret = rvin_find_pad(subdev, MEDIA_PAD_FL_SINK);
-	vin->digital->sink_pad = ret < 0 ? 0 : ret;
-
-	vin->digital->subdev = subdev;
-
 	vin_dbg(vin, "bound subdev %s source pad: %u sink pad: %u\n",
 		subdev->name, vin->digital->source_pad,
 		vin->digital->sink_pad);
 
 	return 0;
 }
+
 static const struct v4l2_async_notifier_operations rvin_digital_notify_ops = {
 	.bound = rvin_digital_notify_bound,
 	.unbind = rvin_digital_notify_unbind,
 	.complete = rvin_digital_notify_complete,
 };
 
-
 static int rvin_digital_parse_v4l2(struct device *dev,
 				   struct v4l2_fwnode_endpoint *vep,
 				   struct v4l2_async_subdev *asd)
@@ -277,6 +315,8 @@ static int rcar_vin_remove(struct platform_device *pdev)
 	v4l2_async_notifier_unregister(&vin->notifier);
 	v4l2_async_notifier_cleanup(&vin->notifier);
 
+	v4l2_ctrl_handler_free(&vin->ctrl_handler);
+
 	rvin_dma_unregister(vin);
 
 	return 0;
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 32a658214f48fa49..4a0610a6b4503501 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -847,9 +847,6 @@ void rvin_v4l2_unregister(struct rvin_dev *vin)
 	v4l2_info(&vin->v4l2_dev, "Removing %s\n",
 		  video_device_node_name(&vin->vdev));
 
-	/* Checks internaly if handlers have been init or not */
-	v4l2_ctrl_handler_free(&vin->ctrl_handler);
-
 	/* Checks internaly if vdev have been init or not */
 	video_unregister_device(&vin->vdev);
 }
@@ -872,41 +869,10 @@ static void rvin_notify(struct v4l2_subdev *sd,
 int rvin_v4l2_register(struct rvin_dev *vin)
 {
 	struct video_device *vdev = &vin->vdev;
-	struct v4l2_subdev *sd = vin_to_source(vin);
 	int ret;
 
-	v4l2_set_subdev_hostdata(sd, vin);
-
 	vin->v4l2_dev.notify = rvin_notify;
 
-	ret = v4l2_subdev_call(sd, video, g_tvnorms, &vin->vdev.tvnorms);
-	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
-		return ret;
-
-	if (vin->vdev.tvnorms == 0) {
-		/* Disable the STD API if there are no tvnorms defined */
-		v4l2_disable_ioctl(&vin->vdev, VIDIOC_G_STD);
-		v4l2_disable_ioctl(&vin->vdev, VIDIOC_S_STD);
-		v4l2_disable_ioctl(&vin->vdev, VIDIOC_QUERYSTD);
-		v4l2_disable_ioctl(&vin->vdev, VIDIOC_ENUMSTD);
-	}
-
-	/* Add the controls */
-	/*
-	 * Currently the subdev with the largest number of controls (13) is
-	 * ov6550. So let's pick 16 as a hint for the control handler. Note
-	 * that this is a hint only: too large and you waste some memory, too
-	 * small and there is a (very) small performance hit when looking up
-	 * controls in the internal hash.
-	 */
-	ret = v4l2_ctrl_handler_init(&vin->ctrl_handler, 16);
-	if (ret < 0)
-		return ret;
-
-	ret = v4l2_ctrl_add_handler(&vin->ctrl_handler, sd->ctrl_handler, NULL);
-	if (ret < 0)
-		return ret;
-
 	/* video node */
 	vdev->fops = &rvin_fops;
 	vdev->v4l2_dev = &vin->v4l2_dev;
@@ -915,7 +881,6 @@ int rvin_v4l2_register(struct rvin_dev *vin)
 	vdev->release = video_device_release_empty;
 	vdev->ioctl_ops = &rvin_ioctl_ops;
 	vdev->lock = &vin->lock;
-	vdev->ctrl_handler = &vin->ctrl_handler;
 	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
 		V4L2_CAP_READWRITE;
 
-- 
2.16.2

[PATCH v14 07/33] rcar-vin: move model information to own struct

[Niklas Söderlund]

When Gen3 support is added to the driver more than model ID will be
different for the different SoCs. To avoid a lot of if statements in the
code create a struct rvin_info to store this information.

While we are at it rename the poorly chosen enum which contains the
different model IDs from chip_id to model_id. Also sort the compatible
string entries and make use of of_device_get_match_data() which will
always work as the driver is DT only, so there's always a valid match.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 56 +++++++++++++++++++++--------
 drivers/media/platform/rcar-vin/rcar-v4l2.c |  3 +-
 drivers/media/platform/rcar-vin/rcar-vin.h  | 14 ++++++--
 3 files changed, 55 insertions(+), 18 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 64daf92bc66dd81b..71d66916ce1b28ab 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -241,21 +241,53 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
  * Platform Device Driver
  */
 
+static const struct rvin_info rcar_info_h1 = {
+	.model = RCAR_H1,
+};
+
+static const struct rvin_info rcar_info_m1 = {
+	.model = RCAR_M1,
+};
+
+static const struct rvin_info rcar_info_gen2 = {
+	.model = RCAR_GEN2,
+};
+
 static const struct of_device_id rvin_of_id_table[] = {
-	{ .compatible = "renesas,vin-r8a7794", .data = (void *)RCAR_GEN2 },
-	{ .compatible = "renesas,vin-r8a7793", .data = (void *)RCAR_GEN2 },
-	{ .compatible = "renesas,vin-r8a7791", .data = (void *)RCAR_GEN2 },
-	{ .compatible = "renesas,vin-r8a7790", .data = (void *)RCAR_GEN2 },
-	{ .compatible = "renesas,vin-r8a7779", .data = (void *)RCAR_H1 },
-	{ .compatible = "renesas,vin-r8a7778", .data = (void *)RCAR_M1 },
-	{ .compatible = "renesas,rcar-gen2-vin", .data = (void *)RCAR_GEN2 },
-	{ },
+	{
+		.compatible = "renesas,vin-r8a7778",
+		.data = &rcar_info_m1,
+	},
+	{
+		.compatible = "renesas,vin-r8a7779",
+		.data = &rcar_info_h1,
+	},
+	{
+		.compatible = "renesas,vin-r8a7790",
+		.data = &rcar_info_gen2,
+	},
+	{
+		.compatible = "renesas,vin-r8a7791",
+		.data = &rcar_info_gen2,
+	},
+	{
+		.compatible = "renesas,vin-r8a7793",
+		.data = &rcar_info_gen2,
+	},
+	{
+		.compatible = "renesas,vin-r8a7794",
+		.data = &rcar_info_gen2,
+	},
+	{
+		.compatible = "renesas,rcar-gen2-vin",
+		.data = &rcar_info_gen2,
+	},
+	{ /* Sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, rvin_of_id_table);
 
 static int rcar_vin_probe(struct platform_device *pdev)
 {
-	const struct of_device_id *match;
 	struct rvin_dev *vin;
 	struct resource *mem;
 	int irq, ret;
@@ -264,12 +296,8 @@ static int rcar_vin_probe(struct platform_device *pdev)
 	if (!vin)
 		return -ENOMEM;
 
-	match = of_match_device(of_match_ptr(rvin_of_id_table), &pdev->dev);
-	if (!match)
-		return -ENODEV;
-
 	vin->dev = &pdev->dev;
-	vin->chip = (enum chip_id)match->data;
+	vin->info = of_device_get_match_data(&pdev->dev);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (mem == NULL)
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 4a0610a6b4503501..0a035667c0b0e93f 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -266,7 +266,8 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	pix->sizeimage = max_t(u32, pix->sizeimage,
 			       rvin_format_sizeimage(pix));
 
-	if (vin->chip == RCAR_M1 && pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
+	if (vin->info->model == RCAR_M1 &&
+	    pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
 		vin_err(vin, "pixel format XBGR32 not supported on M1\n");
 		return -EINVAL;
 	}
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 385243e3d4da130b..b63c4fce68adaae6 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -29,7 +29,7 @@
 /* Address alignment mask for HW buffers */
 #define HW_BUFFER_MASK 0x7f
 
-enum chip_id {
+enum model_id {
 	RCAR_H1,
 	RCAR_M1,
 	RCAR_GEN2,
@@ -86,11 +86,19 @@ struct rvin_graph_entity {
 	unsigned int sink_pad;
 };
 
+/**
+ * struct rvin_info - Information about the particular VIN implementation
+ * @model:		VIN model
+ */
+struct rvin_info {
+	enum model_id model;
+};
+
 /**
  * struct rvin_dev - Renesas VIN device structure
  * @dev:		(OF) device
  * @base:		device I/O register space remapped to virtual memory
- * @chip:		type of VIN chip
+ * @info:		info about VIN instance
  *
  * @vdev:		V4L2 video device associated with VIN
  * @v4l2_dev:		V4L2 device
@@ -119,7 +127,7 @@ struct rvin_graph_entity {
 struct rvin_dev {
 	struct device *dev;
 	void __iomem *base;
-	enum chip_id chip;
+	const struct rvin_info *info;
 
 	struct video_device vdev;
 	struct v4l2_device v4l2_dev;
-- 
2.16.2

[PATCH v14 08/33] rcar-vin: move max width and height information to chip information

[Niklas Söderlund]

On Gen3 the max supported width and height will be different from Gen2.
Move the limits to the struct rvin_info to prepare for Gen3 support.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 6 ++++++
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 6 ++----
 drivers/media/platform/rcar-vin/rcar-vin.h  | 5 +++++
 3 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 71d66916ce1b28ab..be49d8968f0a0cef 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -243,14 +243,20 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
 
 static const struct rvin_info rcar_info_h1 = {
 	.model = RCAR_H1,
+	.max_width = 2048,
+	.max_height = 2048,
 };
 
 static const struct rvin_info rcar_info_m1 = {
 	.model = RCAR_M1,
+	.max_width = 2048,
+	.max_height = 2048,
 };
 
 static const struct rvin_info rcar_info_gen2 = {
 	.model = RCAR_GEN2,
+	.max_width = 2048,
+	.max_height = 2048,
 };
 
 static const struct of_device_id rvin_of_id_table[] = {
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 0a035667c0b0e93f..8805d7911a761019 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -23,8 +23,6 @@
 #include "rcar-vin.h"
 
 #define RVIN_DEFAULT_FORMAT	V4L2_PIX_FMT_YUYV
-#define RVIN_MAX_WIDTH		2048
-#define RVIN_MAX_HEIGHT		2048
 
 /* -----------------------------------------------------------------------------
  * Format Conversions
@@ -258,8 +256,8 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
 
 	/* Limit to VIN capabilities */
-	v4l_bound_align_image(&pix->width, 2, RVIN_MAX_WIDTH, walign,
-			      &pix->height, 4, RVIN_MAX_HEIGHT, 2, 0);
+	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
+			      &pix->height, 4, vin->info->max_height, 2, 0);
 
 	pix->bytesperline = max_t(u32, pix->bytesperline,
 				  rvin_format_bytesperline(pix));
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index b63c4fce68adaae6..8d135ed3f7abd855 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -89,9 +89,14 @@ struct rvin_graph_entity {
 /**
  * struct rvin_info - Information about the particular VIN implementation
  * @model:		VIN model
+ * @max_width:		max input width the VIN supports
+ * @max_height:		max input height the VIN supports
  */
 struct rvin_info {
 	enum model_id model;
+
+	unsigned int max_width;
+	unsigned int max_height;
 };
 
 /**
-- 
2.16.2

[PATCH v14 09/33] rcar-vin: move functions regarding scaling

[Niklas Söderlund]

In preparation of refactoring the scaling code move the code regarding
scaling to to the top of the file to avoid the need to add forward
declarations. No code is changed in this commit only whole functions
moved inside the same file.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 526 +++++++++++++++--------------
 1 file changed, 265 insertions(+), 261 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 2aae3ca54eabac01..23120901b0a062ed 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -138,267 +138,6 @@ static u32 rvin_read(struct rvin_dev *vin, u32 offset)
 	return ioread32(vin->base + offset);
 }
 
-static int rvin_setup(struct rvin_dev *vin)
-{
-	u32 vnmc, dmr, dmr2, interrupts;
-	v4l2_std_id std;
-	bool progressive = false, output_is_yuv = false, input_is_yuv = false;
-
-	switch (vin->format.field) {
-	case V4L2_FIELD_TOP:
-		vnmc = VNMC_IM_ODD;
-		break;
-	case V4L2_FIELD_BOTTOM:
-		vnmc = VNMC_IM_EVEN;
-		break;
-	case V4L2_FIELD_INTERLACED:
-		/* Default to TB */
-		vnmc = VNMC_IM_FULL;
-		/* Use BT if video standard can be read and is 60 Hz format */
-		if (!v4l2_subdev_call(vin_to_source(vin), video, g_std, &std)) {
-			if (std & V4L2_STD_525_60)
-				vnmc = VNMC_IM_FULL | VNMC_FOC;
-		}
-		break;
-	case V4L2_FIELD_INTERLACED_TB:
-		vnmc = VNMC_IM_FULL;
-		break;
-	case V4L2_FIELD_INTERLACED_BT:
-		vnmc = VNMC_IM_FULL | VNMC_FOC;
-		break;
-	case V4L2_FIELD_ALTERNATE:
-	case V4L2_FIELD_NONE:
-		vnmc = VNMC_IM_ODD_EVEN;
-		progressive = true;
-		break;
-	default:
-		vnmc = VNMC_IM_ODD;
-		break;
-	}
-
-	/*
-	 * Input interface
-	 */
-	switch (vin->digital->code) {
-	case MEDIA_BUS_FMT_YUYV8_1X16:
-		/* BT.601/BT.1358 16bit YCbCr422 */
-		vnmc |= VNMC_INF_YUV16;
-		input_is_yuv = true;
-		break;
-	case MEDIA_BUS_FMT_UYVY8_2X8:
-		/* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */
-		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
-			VNMC_INF_YUV8_BT656 : VNMC_INF_YUV8_BT601;
-		input_is_yuv = true;
-		break;
-	case MEDIA_BUS_FMT_RGB888_1X24:
-		vnmc |= VNMC_INF_RGB888;
-		break;
-	case MEDIA_BUS_FMT_UYVY10_2X10:
-		/* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */
-		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
-			VNMC_INF_YUV10_BT656 : VNMC_INF_YUV10_BT601;
-		input_is_yuv = true;
-		break;
-	default:
-		break;
-	}
-
-	/* Enable VSYNC Field Toogle mode after one VSYNC input */
-	dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
-
-	/* Hsync Signal Polarity Select */
-	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
-		dmr2 |= VNDMR2_HPS;
-
-	/* Vsync Signal Polarity Select */
-	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
-		dmr2 |= VNDMR2_VPS;
-
-	/*
-	 * Output format
-	 */
-	switch (vin->format.pixelformat) {
-	case V4L2_PIX_FMT_NV16:
-		rvin_write(vin,
-			   ALIGN(vin->format.width * vin->format.height, 0x80),
-			   VNUVAOF_REG);
-		dmr = VNDMR_DTMD_YCSEP;
-		output_is_yuv = true;
-		break;
-	case V4L2_PIX_FMT_YUYV:
-		dmr = VNDMR_BPSM;
-		output_is_yuv = true;
-		break;
-	case V4L2_PIX_FMT_UYVY:
-		dmr = 0;
-		output_is_yuv = true;
-		break;
-	case V4L2_PIX_FMT_XRGB555:
-		dmr = VNDMR_DTMD_ARGB1555;
-		break;
-	case V4L2_PIX_FMT_RGB565:
-		dmr = 0;
-		break;
-	case V4L2_PIX_FMT_XBGR32:
-		/* Note: not supported on M1 */
-		dmr = VNDMR_EXRGB;
-		break;
-	default:
-		vin_err(vin, "Invalid pixelformat (0x%x)\n",
-			vin->format.pixelformat);
-		return -EINVAL;
-	}
-
-	/* Always update on field change */
-	vnmc |= VNMC_VUP;
-
-	/* If input and output use the same colorspace, use bypass mode */
-	if (input_is_yuv == output_is_yuv)
-		vnmc |= VNMC_BPS;
-
-	/* Progressive or interlaced mode */
-	interrupts = progressive ? VNIE_FIE : VNIE_EFE;
-
-	/* Ack interrupts */
-	rvin_write(vin, interrupts, VNINTS_REG);
-	/* Enable interrupts */
-	rvin_write(vin, interrupts, VNIE_REG);
-	/* Start capturing */
-	rvin_write(vin, dmr, VNDMR_REG);
-	rvin_write(vin, dmr2, VNDMR2_REG);
-
-	/* Enable module */
-	rvin_write(vin, vnmc | VNMC_ME, VNMC_REG);
-
-	return 0;
-}
-
-static void rvin_disable_interrupts(struct rvin_dev *vin)
-{
-	rvin_write(vin, 0, VNIE_REG);
-}
-
-static u32 rvin_get_interrupt_status(struct rvin_dev *vin)
-{
-	return rvin_read(vin, VNINTS_REG);
-}
-
-static void rvin_ack_interrupt(struct rvin_dev *vin)
-{
-	rvin_write(vin, rvin_read(vin, VNINTS_REG), VNINTS_REG);
-}
-
-static bool rvin_capture_active(struct rvin_dev *vin)
-{
-	return rvin_read(vin, VNMS_REG) & VNMS_CA;
-}
-
-static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32 vnms)
-{
-	if (vin->format.field == V4L2_FIELD_ALTERNATE) {
-		/* If FS is set it's a Even field */
-		if (vnms & VNMS_FS)
-			return V4L2_FIELD_BOTTOM;
-		return V4L2_FIELD_TOP;
-	}
-
-	return vin->format.field;
-}
-
-static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t addr)
-{
-	const struct rvin_video_format *fmt;
-	int offsetx, offsety;
-	dma_addr_t offset;
-
-	fmt = rvin_format_from_pixel(vin->format.pixelformat);
-
-	/*
-	 * There is no HW support for composition do the beast we can
-	 * by modifying the buffer offset
-	 */
-	offsetx = vin->compose.left * fmt->bpp;
-	offsety = vin->compose.top * vin->format.bytesperline;
-	offset = addr + offsetx + offsety;
-
-	/*
-	 * The address needs to be 128 bytes aligned. Driver should never accept
-	 * settings that do not satisfy this in the first place...
-	 */
-	if (WARN_ON((offsetx | offsety | offset) & HW_BUFFER_MASK))
-		return;
-
-	rvin_write(vin, offset, VNMB_REG(slot));
-}
-
-/*
- * Moves a buffer from the queue to the HW slot. If no buffer is
- * available use the scratch buffer. The scratch buffer is never
- * returned to userspace, its only function is to enable the capture
- * loop to keep running.
- */
-static void rvin_fill_hw_slot(struct rvin_dev *vin, int slot)
-{
-	struct rvin_buffer *buf;
-	struct vb2_v4l2_buffer *vbuf;
-	dma_addr_t phys_addr;
-
-	/* A already populated slot shall never be overwritten. */
-	if (WARN_ON(vin->queue_buf[slot] != NULL))
-		return;
-
-	vin_dbg(vin, "Filling HW slot: %d\n", slot);
-
-	if (list_empty(&vin->buf_list)) {
-		vin->queue_buf[slot] = NULL;
-		phys_addr = vin->scratch_phys;
-	} else {
-		/* Keep track of buffer we give to HW */
-		buf = list_entry(vin->buf_list.next, struct rvin_buffer, list);
-		vbuf = &buf->vb;
-		list_del_init(to_buf_list(vbuf));
-		vin->queue_buf[slot] = vbuf;
-
-		/* Setup DMA */
-		phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
-	}
-
-	rvin_set_slot_addr(vin, slot, phys_addr);
-}
-
-static int rvin_capture_start(struct rvin_dev *vin)
-{
-	int slot, ret;
-
-	for (slot = 0; slot < HW_BUFFER_NUM; slot++)
-		rvin_fill_hw_slot(vin, slot);
-
-	rvin_crop_scale_comp(vin);
-
-	ret = rvin_setup(vin);
-	if (ret)
-		return ret;
-
-	vin_dbg(vin, "Starting to capture\n");
-
-	/* Continuous Frame Capture Mode */
-	rvin_write(vin, VNFC_C_FRAME, VNFC_REG);
-
-	vin->state = RUNNING;
-
-	return 0;
-}
-
-static void rvin_capture_stop(struct rvin_dev *vin)
-{
-	/* Set continuous & single transfer off */
-	rvin_write(vin, 0, VNFC_REG);
-
-	/* Disable module */
-	rvin_write(vin, rvin_read(vin, VNMC_REG) & ~VNMC_ME, VNMC_REG);
-}
-
 /* -----------------------------------------------------------------------------
  * Crop and Scaling Gen2
  */
@@ -854,6 +593,271 @@ void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
 	pix->height = height;
 }
 
+/* -----------------------------------------------------------------------------
+ * Hardware setup
+ */
+
+static int rvin_setup(struct rvin_dev *vin)
+{
+	u32 vnmc, dmr, dmr2, interrupts;
+	v4l2_std_id std;
+	bool progressive = false, output_is_yuv = false, input_is_yuv = false;
+
+	switch (vin->format.field) {
+	case V4L2_FIELD_TOP:
+		vnmc = VNMC_IM_ODD;
+		break;
+	case V4L2_FIELD_BOTTOM:
+		vnmc = VNMC_IM_EVEN;
+		break;
+	case V4L2_FIELD_INTERLACED:
+		/* Default to TB */
+		vnmc = VNMC_IM_FULL;
+		/* Use BT if video standard can be read and is 60 Hz format */
+		if (!v4l2_subdev_call(vin_to_source(vin), video, g_std, &std)) {
+			if (std & V4L2_STD_525_60)
+				vnmc = VNMC_IM_FULL | VNMC_FOC;
+		}
+		break;
+	case V4L2_FIELD_INTERLACED_TB:
+		vnmc = VNMC_IM_FULL;
+		break;
+	case V4L2_FIELD_INTERLACED_BT:
+		vnmc = VNMC_IM_FULL | VNMC_FOC;
+		break;
+	case V4L2_FIELD_ALTERNATE:
+	case V4L2_FIELD_NONE:
+		vnmc = VNMC_IM_ODD_EVEN;
+		progressive = true;
+		break;
+	default:
+		vnmc = VNMC_IM_ODD;
+		break;
+	}
+
+	/*
+	 * Input interface
+	 */
+	switch (vin->digital->code) {
+	case MEDIA_BUS_FMT_YUYV8_1X16:
+		/* BT.601/BT.1358 16bit YCbCr422 */
+		vnmc |= VNMC_INF_YUV16;
+		input_is_yuv = true;
+		break;
+	case MEDIA_BUS_FMT_UYVY8_2X8:
+		/* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */
+		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+			VNMC_INF_YUV8_BT656 : VNMC_INF_YUV8_BT601;
+		input_is_yuv = true;
+		break;
+	case MEDIA_BUS_FMT_RGB888_1X24:
+		vnmc |= VNMC_INF_RGB888;
+		break;
+	case MEDIA_BUS_FMT_UYVY10_2X10:
+		/* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */
+		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+			VNMC_INF_YUV10_BT656 : VNMC_INF_YUV10_BT601;
+		input_is_yuv = true;
+		break;
+	default:
+		break;
+	}
+
+	/* Enable VSYNC Field Toogle mode after one VSYNC input */
+	dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
+
+	/* Hsync Signal Polarity Select */
+	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
+		dmr2 |= VNDMR2_HPS;
+
+	/* Vsync Signal Polarity Select */
+	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
+		dmr2 |= VNDMR2_VPS;
+
+	/*
+	 * Output format
+	 */
+	switch (vin->format.pixelformat) {
+	case V4L2_PIX_FMT_NV16:
+		rvin_write(vin,
+			   ALIGN(vin->format.width * vin->format.height, 0x80),
+			   VNUVAOF_REG);
+		dmr = VNDMR_DTMD_YCSEP;
+		output_is_yuv = true;
+		break;
+	case V4L2_PIX_FMT_YUYV:
+		dmr = VNDMR_BPSM;
+		output_is_yuv = true;
+		break;
+	case V4L2_PIX_FMT_UYVY:
+		dmr = 0;
+		output_is_yuv = true;
+		break;
+	case V4L2_PIX_FMT_XRGB555:
+		dmr = VNDMR_DTMD_ARGB1555;
+		break;
+	case V4L2_PIX_FMT_RGB565:
+		dmr = 0;
+		break;
+	case V4L2_PIX_FMT_XBGR32:
+		/* Note: not supported on M1 */
+		dmr = VNDMR_EXRGB;
+		break;
+	default:
+		vin_err(vin, "Invalid pixelformat (0x%x)\n",
+			vin->format.pixelformat);
+		return -EINVAL;
+	}
+
+	/* Always update on field change */
+	vnmc |= VNMC_VUP;
+
+	/* If input and output use the same colorspace, use bypass mode */
+	if (input_is_yuv == output_is_yuv)
+		vnmc |= VNMC_BPS;
+
+	/* Progressive or interlaced mode */
+	interrupts = progressive ? VNIE_FIE : VNIE_EFE;
+
+	/* Ack interrupts */
+	rvin_write(vin, interrupts, VNINTS_REG);
+	/* Enable interrupts */
+	rvin_write(vin, interrupts, VNIE_REG);
+	/* Start capturing */
+	rvin_write(vin, dmr, VNDMR_REG);
+	rvin_write(vin, dmr2, VNDMR2_REG);
+
+	/* Enable module */
+	rvin_write(vin, vnmc | VNMC_ME, VNMC_REG);
+
+	return 0;
+}
+
+static void rvin_disable_interrupts(struct rvin_dev *vin)
+{
+	rvin_write(vin, 0, VNIE_REG);
+}
+
+static u32 rvin_get_interrupt_status(struct rvin_dev *vin)
+{
+	return rvin_read(vin, VNINTS_REG);
+}
+
+static void rvin_ack_interrupt(struct rvin_dev *vin)
+{
+	rvin_write(vin, rvin_read(vin, VNINTS_REG), VNINTS_REG);
+}
+
+static bool rvin_capture_active(struct rvin_dev *vin)
+{
+	return rvin_read(vin, VNMS_REG) & VNMS_CA;
+}
+
+static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32 vnms)
+{
+	if (vin->format.field == V4L2_FIELD_ALTERNATE) {
+		/* If FS is set it's a Even field */
+		if (vnms & VNMS_FS)
+			return V4L2_FIELD_BOTTOM;
+		return V4L2_FIELD_TOP;
+	}
+
+	return vin->format.field;
+}
+
+static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t addr)
+{
+	const struct rvin_video_format *fmt;
+	int offsetx, offsety;
+	dma_addr_t offset;
+
+	fmt = rvin_format_from_pixel(vin->format.pixelformat);
+
+	/*
+	 * There is no HW support for composition do the beast we can
+	 * by modifying the buffer offset
+	 */
+	offsetx = vin->compose.left * fmt->bpp;
+	offsety = vin->compose.top * vin->format.bytesperline;
+	offset = addr + offsetx + offsety;
+
+	/*
+	 * The address needs to be 128 bytes aligned. Driver should never accept
+	 * settings that do not satisfy this in the first place...
+	 */
+	if (WARN_ON((offsetx | offsety | offset) & HW_BUFFER_MASK))
+		return;
+
+	rvin_write(vin, offset, VNMB_REG(slot));
+}
+
+/*
+ * Moves a buffer from the queue to the HW slot. If no buffer is
+ * available use the scratch buffer. The scratch buffer is never
+ * returned to userspace, its only function is to enable the capture
+ * loop to keep running.
+ */
+static void rvin_fill_hw_slot(struct rvin_dev *vin, int slot)
+{
+	struct rvin_buffer *buf;
+	struct vb2_v4l2_buffer *vbuf;
+	dma_addr_t phys_addr;
+
+	/* A already populated slot shall never be overwritten. */
+	if (WARN_ON(vin->queue_buf[slot] != NULL))
+		return;
+
+	vin_dbg(vin, "Filling HW slot: %d\n", slot);
+
+	if (list_empty(&vin->buf_list)) {
+		vin->queue_buf[slot] = NULL;
+		phys_addr = vin->scratch_phys;
+	} else {
+		/* Keep track of buffer we give to HW */
+		buf = list_entry(vin->buf_list.next, struct rvin_buffer, list);
+		vbuf = &buf->vb;
+		list_del_init(to_buf_list(vbuf));
+		vin->queue_buf[slot] = vbuf;
+
+		/* Setup DMA */
+		phys_addr = vb2_dma_contig_plane_dma_addr(&vbuf->vb2_buf, 0);
+	}
+
+	rvin_set_slot_addr(vin, slot, phys_addr);
+}
+
+static int rvin_capture_start(struct rvin_dev *vin)
+{
+	int slot, ret;
+
+	for (slot = 0; slot < HW_BUFFER_NUM; slot++)
+		rvin_fill_hw_slot(vin, slot);
+
+	rvin_crop_scale_comp(vin);
+
+	ret = rvin_setup(vin);
+	if (ret)
+		return ret;
+
+	vin_dbg(vin, "Starting to capture\n");
+
+	/* Continuous Frame Capture Mode */
+	rvin_write(vin, VNFC_C_FRAME, VNFC_REG);
+
+	vin->state = RUNNING;
+
+	return 0;
+}
+
+static void rvin_capture_stop(struct rvin_dev *vin)
+{
+	/* Set continuous & single transfer off */
+	rvin_write(vin, 0, VNFC_REG);
+
+	/* Disable module */
+	rvin_write(vin, rvin_read(vin, VNMC_REG) & ~VNMC_ME, VNMC_REG);
+}
+
 /* -----------------------------------------------------------------------------
  * DMA Functions
  */
-- 
2.16.2

[PATCH v14 10/33] rcar-vin: all Gen2 boards can scale simplify logic

[Niklas Söderlund]

The logic to preserve the requested format width and height are too
complex and come from a premature optimization for Gen3. All Gen2 SoC
can scale and the Gen3 implementation will not use these functions at
all so simply preserve the width and height when interacting with the
subdevice much like the field is preserved simplifies the logic quite a
bit.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-dma.c  |  8 --------
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 25 +++++++++++--------------
 drivers/media/platform/rcar-vin/rcar-vin.h  |  2 --
 3 files changed, 11 insertions(+), 24 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 23120901b0a062ed..4f48575f2008fe34 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -585,14 +585,6 @@ void rvin_crop_scale_comp(struct rvin_dev *vin)
 		0, 0);
 }
 
-void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
-		    u32 width, u32 height)
-{
-	/* All VIN channels on Gen2 have scalers */
-	pix->width = width;
-	pix->height = height;
-}
-
 /* -----------------------------------------------------------------------------
  * Hardware setup
  */
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 8805d7911a761019..c2265324c7c96308 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -166,6 +166,7 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 		.which = which,
 	};
 	enum v4l2_field field;
+	u32 width, height;
 	int ret;
 
 	sd = vin_to_source(vin);
@@ -178,7 +179,10 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 
 	format.pad = vin->digital->source_pad;
 
+	/* Allow the video device to override field and to scale */
 	field = pix->field;
+	width = pix->width;
+	height = pix->height;
 
 	ret = v4l2_subdev_call(sd, pad, set_fmt, pad_cfg, &format);
 	if (ret < 0 && ret != -ENOIOCTLCMD)
@@ -186,11 +190,13 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 
 	v4l2_fill_pix_format(pix, &format.format);
 
-	pix->field = field;
-
 	source->width = pix->width;
 	source->height = pix->height;
 
+	pix->field = field;
+	pix->width = width;
+	pix->height = height;
+
 	vin_dbg(vin, "Source resolution: %ux%u\n", source->width,
 		source->height);
 
@@ -204,13 +210,9 @@ static int __rvin_try_format(struct rvin_dev *vin,
 			     struct v4l2_pix_format *pix,
 			     struct rvin_source_fmt *source)
 {
-	u32 rwidth, rheight, walign;
+	u32 walign;
 	int ret;
 
-	/* Requested */
-	rwidth = pix->width;
-	rheight = pix->height;
-
 	/* Keep current field if no specific one is asked for */
 	if (pix->field == V4L2_FIELD_ANY)
 		pix->field = vin->format.field;
@@ -248,10 +250,6 @@ static int __rvin_try_format(struct rvin_dev *vin,
 		break;
 	}
 
-	/* If source can't match format try if VIN can scale */
-	if (source->width != rwidth || source->height != rheight)
-		rvin_scale_try(vin, pix, rwidth, rheight);
-
 	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
 	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
 
@@ -270,9 +268,8 @@ static int __rvin_try_format(struct rvin_dev *vin,
 		return -EINVAL;
 	}
 
-	vin_dbg(vin, "Requested %ux%u Got %ux%u bpl: %d size: %d\n",
-		rwidth, rheight, pix->width, pix->height,
-		pix->bytesperline, pix->sizeimage);
+	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
+		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
 
 	return 0;
 }
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 8d135ed3f7abd855..1c91b774205a7750 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -175,8 +175,6 @@ void rvin_v4l2_unregister(struct rvin_dev *vin);
 const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
 
 /* Cropping, composing and scaling */
-void rvin_scale_try(struct rvin_dev *vin, struct v4l2_pix_format *pix,
-		    u32 width, u32 height);
 void rvin_crop_scale_comp(struct rvin_dev *vin);
 
 #endif
-- 
2.16.2

[PATCH v14 11/33] rcar-vin: set a default field to fallback on

[Niklas Söderlund]

If the field is not supported by the driver it should not try to keep
the current field. Instead it should set it to a default fallback. Since
trying a format should always result in the same state regardless of the
current state of the device.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>

---

* Changes since v12
- Moved field != V4L2_FIELD_ANY check from a later commit 'rcar-vin:
  simplify how formats are set and reset' in the series. This is to
  avoid ignoring the field returned from the sensor if FIELD_ANY was
  requested by the user. This was only a problem between this change and
  a few patches later, but better to fix it now. Reported by Hans,
  thanks for spotting this.
- Add review tag from Hans.
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index c2265324c7c96308..16e895657c3f51c5 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -23,6 +23,7 @@
 #include "rcar-vin.h"
 
 #define RVIN_DEFAULT_FORMAT	V4L2_PIX_FMT_YUYV
+#define RVIN_DEFAULT_FIELD	V4L2_FIELD_NONE
 
 /* -----------------------------------------------------------------------------
  * Format Conversions
@@ -143,7 +144,7 @@ static int rvin_reset_format(struct rvin_dev *vin)
 	case V4L2_FIELD_INTERLACED:
 		break;
 	default:
-		vin->format.field = V4L2_FIELD_NONE;
+		vin->format.field = RVIN_DEFAULT_FIELD;
 		break;
 	}
 
@@ -193,7 +194,9 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 	source->width = pix->width;
 	source->height = pix->height;
 
-	pix->field = field;
+	if (field != V4L2_FIELD_ANY)
+		pix->field = field;
+
 	pix->width = width;
 	pix->height = height;
 
@@ -213,10 +216,6 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	u32 walign;
 	int ret;
 
-	/* Keep current field if no specific one is asked for */
-	if (pix->field == V4L2_FIELD_ANY)
-		pix->field = vin->format.field;
-
 	/* If requested format is not supported fallback to the default */
 	if (!rvin_format_from_pixel(pix->pixelformat)) {
 		vin_dbg(vin, "Format 0x%x not found, using default 0x%x\n",
@@ -246,7 +245,7 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	case V4L2_FIELD_INTERLACED:
 		break;
 	default:
-		pix->field = V4L2_FIELD_NONE;
+		pix->field = RVIN_DEFAULT_FIELD;
 		break;
 	}
 
-- 
2.16.2

[PATCH v14 12/33] rcar-vin: fix handling of single field frames (top, bottom and alternate fields)

[Niklas Söderlund]

There was never proper support in the VIN driver to deliver ALTERNATING
field format to user-space, remove this field option. The problem is
that ALTERNATING field order requires the sequence numbers of buffers
returned to userspace to reflect if fields were dropped or not,
something which is not possible with the VIN drivers capture logic.

The VIN driver can still capture from a video source which delivers
frames in ALTERNATING field order, but needs to combine them using the
VIN hardware into INTERLACED field order. Before this change if a source
was delivering fields using ALTERNATE the driver would default to
combining them using this hardware feature. Only if the user explicitly
requested ALTERNATE field order would incorrect frames be delivered.

The height should not be cut in half for the format for TOP or BOTTOM
fields settings. This was a mistake and it was made visible by the
scaling refactoring. Correct behavior is that the user should request a
frame size that fits the half height frame reflected in the field
setting. If not the VIN will do its best to scale the top or bottom to
the requested format and cropping and scaling do not work as expected.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---

* Changes since v13
- Spelling dose -> does
- Add review tag from Laurent

* Changes since v12
- Spelling where -> were.
- Add review tag from Hans.
---
 drivers/media/platform/rcar-vin/rcar-dma.c  | 15 +----------
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 40 +++++++----------------------
 2 files changed, 10 insertions(+), 45 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 4f48575f2008fe34..9233924e5b52de5f 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -617,7 +617,6 @@ static int rvin_setup(struct rvin_dev *vin)
 	case V4L2_FIELD_INTERLACED_BT:
 		vnmc = VNMC_IM_FULL | VNMC_FOC;
 		break;
-	case V4L2_FIELD_ALTERNATE:
 	case V4L2_FIELD_NONE:
 		vnmc = VNMC_IM_ODD_EVEN;
 		progressive = true;
@@ -745,18 +744,6 @@ static bool rvin_capture_active(struct rvin_dev *vin)
 	return rvin_read(vin, VNMS_REG) & VNMS_CA;
 }
 
-static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32 vnms)
-{
-	if (vin->format.field == V4L2_FIELD_ALTERNATE) {
-		/* If FS is set it's a Even field */
-		if (vnms & VNMS_FS)
-			return V4L2_FIELD_BOTTOM;
-		return V4L2_FIELD_TOP;
-	}
-
-	return vin->format.field;
-}
-
 static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t addr)
 {
 	const struct rvin_video_format *fmt;
@@ -892,7 +879,7 @@ static irqreturn_t rvin_irq(int irq, void *data)
 
 	/* Capture frame */
 	if (vin->queue_buf[slot]) {
-		vin->queue_buf[slot]->field = rvin_get_active_field(vin, vnms);
+		vin->queue_buf[slot]->field = vin->format.field;
 		vin->queue_buf[slot]->sequence = vin->sequence;
 		vin->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
 		vb2_buffer_done(&vin->queue_buf[slot]->vb2_buf,
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 16e895657c3f51c5..81a9aec96e8e664a 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -121,33 +121,6 @@ static int rvin_reset_format(struct rvin_dev *vin)
 	vin->format.colorspace	= mf->colorspace;
 	vin->format.field	= mf->field;
 
-	/*
-	 * If the subdevice uses ALTERNATE field mode and G_STD is
-	 * implemented use the VIN HW to combine the two fields to
-	 * one INTERLACED frame. The ALTERNATE field mode can still
-	 * be requested in S_FMT and be respected, this is just the
-	 * default which is applied at probing or when S_STD is called.
-	 */
-	if (vin->format.field == V4L2_FIELD_ALTERNATE &&
-	    v4l2_subdev_has_op(vin_to_source(vin), video, g_std))
-		vin->format.field = V4L2_FIELD_INTERLACED;
-
-	switch (vin->format.field) {
-	case V4L2_FIELD_TOP:
-	case V4L2_FIELD_BOTTOM:
-	case V4L2_FIELD_ALTERNATE:
-		vin->format.height /= 2;
-		break;
-	case V4L2_FIELD_NONE:
-	case V4L2_FIELD_INTERLACED_TB:
-	case V4L2_FIELD_INTERLACED_BT:
-	case V4L2_FIELD_INTERLACED:
-		break;
-	default:
-		vin->format.field = RVIN_DEFAULT_FIELD;
-		break;
-	}
-
 	rvin_reset_crop_compose(vin);
 
 	vin->format.bytesperline = rvin_format_bytesperline(&vin->format);
@@ -235,15 +208,20 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	switch (pix->field) {
 	case V4L2_FIELD_TOP:
 	case V4L2_FIELD_BOTTOM:
-	case V4L2_FIELD_ALTERNATE:
-		pix->height /= 2;
-		source->height /= 2;
-		break;
 	case V4L2_FIELD_NONE:
 	case V4L2_FIELD_INTERLACED_TB:
 	case V4L2_FIELD_INTERLACED_BT:
 	case V4L2_FIELD_INTERLACED:
 		break;
+	case V4L2_FIELD_ALTERNATE:
+		/*
+		 * Driver does not (yet) support outputting ALTERNATE to a
+		 * userspace. It does support outputting INTERLACED so use
+		 * the VIN hardware to combine the two fields.
+		 */
+		pix->field = V4L2_FIELD_INTERLACED;
+		pix->height *= 2;
+		break;
 	default:
 		pix->field = RVIN_DEFAULT_FIELD;
 		break;
-- 
2.16.2

[PATCH v14 13/33] rcar-vin: update bytesperline and sizeimage calculation

[Niklas Söderlund]

Remove over complicated logic to calculate the value for bytesperline
and sizeimage that was carried over from the soc_camera port. There is
no need to find the max value of bytesperline and sizeimage from
user-space as they are set to 0 before the max_t() operation.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 81a9aec96e8e664a..907322e1eeb5f6a0 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -196,10 +196,6 @@ static int __rvin_try_format(struct rvin_dev *vin,
 		pix->pixelformat = RVIN_DEFAULT_FORMAT;
 	}
 
-	/* Always recalculate */
-	pix->bytesperline = 0;
-	pix->sizeimage = 0;
-
 	/* Limit to source capabilities */
 	ret = __rvin_try_format_source(vin, which, pix, source);
 	if (ret)
@@ -234,10 +230,8 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
 			      &pix->height, 4, vin->info->max_height, 2, 0);
 
-	pix->bytesperline = max_t(u32, pix->bytesperline,
-				  rvin_format_bytesperline(pix));
-	pix->sizeimage = max_t(u32, pix->sizeimage,
-			       rvin_format_sizeimage(pix));
+	pix->bytesperline = rvin_format_bytesperline(pix);
+	pix->sizeimage = rvin_format_sizeimage(pix);
 
 	if (vin->info->model == RCAR_M1 &&
 	    pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
-- 
2.16.2

[PATCH v14 14/33] rcar-vin: align pixelformat check

[Niklas Söderlund]

If the pixelformat is not supported it should not fail but be set to
something that works. While we are at it move the two different
checks of the pixelformat to the same statement.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 907322e1eeb5f6a0..d9231a074aa2c29d 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -189,12 +189,10 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	u32 walign;
 	int ret;
 
-	/* If requested format is not supported fallback to the default */
-	if (!rvin_format_from_pixel(pix->pixelformat)) {
-		vin_dbg(vin, "Format 0x%x not found, using default 0x%x\n",
-			pix->pixelformat, RVIN_DEFAULT_FORMAT);
+	if (!rvin_format_from_pixel(pix->pixelformat) ||
+	    (vin->info->model == RCAR_M1 &&
+	     pix->pixelformat == V4L2_PIX_FMT_XBGR32))
 		pix->pixelformat = RVIN_DEFAULT_FORMAT;
-	}
 
 	/* Limit to source capabilities */
 	ret = __rvin_try_format_source(vin, which, pix, source);
@@ -233,12 +231,6 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	pix->bytesperline = rvin_format_bytesperline(pix);
 	pix->sizeimage = rvin_format_sizeimage(pix);
 
-	if (vin->info->model == RCAR_M1 &&
-	    pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
-		vin_err(vin, "pixel format XBGR32 not supported on M1\n");
-		return -EINVAL;
-	}
-
 	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
 		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
 
-- 
2.16.2

[PATCH v14 15/33] rcar-vin: break out format alignment and checking

[Niklas Söderlund]

Part of the format alignment and checking can be shared with the Gen3
format handling. Break that part out to a separate function.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 85 ++++++++++++++++-------------
 1 file changed, 48 insertions(+), 37 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index d9231a074aa2c29d..f3a0310c43a9877f 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -87,6 +87,53 @@ static u32 rvin_format_sizeimage(struct v4l2_pix_format *pix)
 	return pix->bytesperline * pix->height;
 }
 
+static int rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
+{
+	u32 walign;
+
+	if (!rvin_format_from_pixel(pix->pixelformat) ||
+	    (vin->info->model == RCAR_M1 &&
+	     pix->pixelformat == V4L2_PIX_FMT_XBGR32))
+		pix->pixelformat = RVIN_DEFAULT_FORMAT;
+
+	switch (pix->field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+	case V4L2_FIELD_NONE:
+	case V4L2_FIELD_INTERLACED_TB:
+	case V4L2_FIELD_INTERLACED_BT:
+	case V4L2_FIELD_INTERLACED:
+		break;
+	case V4L2_FIELD_ALTERNATE:
+		/*
+		 * Driver does not (yet) support outputting ALTERNATE to a
+		 * userspace. It does support outputting INTERLACED so use
+		 * the VIN hardware to combine the two fields.
+		 */
+		pix->field = V4L2_FIELD_INTERLACED;
+		pix->height *= 2;
+		break;
+	default:
+		pix->field = RVIN_DEFAULT_FIELD;
+		break;
+	}
+
+	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
+	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
+
+	/* Limit to VIN capabilities */
+	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
+			      &pix->height, 4, vin->info->max_height, 2, 0);
+
+	pix->bytesperline = rvin_format_bytesperline(pix);
+	pix->sizeimage = rvin_format_sizeimage(pix);
+
+	vin_dbg(vin, "Format %ux%u bpl: %u size: %u\n",
+		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
+
+	return 0;
+}
+
 /* -----------------------------------------------------------------------------
  * V4L2
  */
@@ -186,7 +233,6 @@ static int __rvin_try_format(struct rvin_dev *vin,
 			     struct v4l2_pix_format *pix,
 			     struct rvin_source_fmt *source)
 {
-	u32 walign;
 	int ret;
 
 	if (!rvin_format_from_pixel(pix->pixelformat) ||
@@ -199,42 +245,7 @@ static int __rvin_try_format(struct rvin_dev *vin,
 	if (ret)
 		return ret;
 
-	switch (pix->field) {
-	case V4L2_FIELD_TOP:
-	case V4L2_FIELD_BOTTOM:
-	case V4L2_FIELD_NONE:
-	case V4L2_FIELD_INTERLACED_TB:
-	case V4L2_FIELD_INTERLACED_BT:
-	case V4L2_FIELD_INTERLACED:
-		break;
-	case V4L2_FIELD_ALTERNATE:
-		/*
-		 * Driver does not (yet) support outputting ALTERNATE to a
-		 * userspace. It does support outputting INTERLACED so use
-		 * the VIN hardware to combine the two fields.
-		 */
-		pix->field = V4L2_FIELD_INTERLACED;
-		pix->height *= 2;
-		break;
-	default:
-		pix->field = RVIN_DEFAULT_FIELD;
-		break;
-	}
-
-	/* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
-	walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
-
-	/* Limit to VIN capabilities */
-	v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
-			      &pix->height, 4, vin->info->max_height, 2, 0);
-
-	pix->bytesperline = rvin_format_bytesperline(pix);
-	pix->sizeimage = rvin_format_sizeimage(pix);
-
-	vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
-		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
-
-	return 0;
+	return rvin_format_align(vin, pix);
 }
 
 static int rvin_querycap(struct file *file, void *priv,
-- 
2.16.2

[PATCH v14 16/33] rcar-vin: simplify how formats are set and reset

[Niklas Söderlund]

With the recent cleanup of the format code to prepare for Gen3 it's
possible to simplify the Gen2 format code path as well. Clean up the
process by defining two functions to handle the set format and reset of
format when the standard is changed.

While at it replace the driver local struct rvin_source_fmt with a
struct v4l2_rect as all it's used for is keep track of the source
dimensions.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---

* Changes since v13
- rvin_reset_format() always returns 0, make it a void function and
  update all call-sites no to check the return value.
- Simplify how the source, compose and crop geometry is reset in
  rvin_reset_format(), no change except making the code more readable,
  thanks Laurent for a good suggestion.
- Split two single line declaration of multiple variables to multiple
  lines, removing constructs like 'crop->top = crop->left = 0;' into two
  separate statements.
- Make crop and compose arguments to rvin_try_format() optional to avoid
  having to declare local variables in rvin_try_fmt_vid_cap() which are
  not used.
- Add review tag from Laurent, thanks!

* Changes since v11
- This patch where 'rcar-vin: read subdevice format for crop only when
  needed'
- Keep caching the source dimensions and drop all changes to
  rvin_g_selection() and rvin_s_selection().
- Inline rvin_get_vin_format_from_source() into rvin_reset_format()
  which now is the only user left.
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 120 ++++++++++++----------------
 drivers/media/platform/rcar-vin/rcar-vin.h  |  14 +---
 2 files changed, 53 insertions(+), 81 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index f3a0310c43a9877f..9eddc2d95ea7d341 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -87,7 +87,7 @@ static u32 rvin_format_sizeimage(struct v4l2_pix_format *pix)
 	return pix->bytesperline * pix->height;
 }
 
-static int rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
+static void rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
 {
 	u32 walign;
 
@@ -130,75 +130,63 @@ static int rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format *pix)
 
 	vin_dbg(vin, "Format %ux%u bpl: %u size: %u\n",
 		pix->width, pix->height, pix->bytesperline, pix->sizeimage);
-
-	return 0;
 }
 
 /* -----------------------------------------------------------------------------
  * V4L2
  */
 
-static void rvin_reset_crop_compose(struct rvin_dev *vin)
-{
-	vin->crop.top = vin->crop.left = 0;
-	vin->crop.width = vin->source.width;
-	vin->crop.height = vin->source.height;
-
-	vin->compose.top = vin->compose.left = 0;
-	vin->compose.width = vin->format.width;
-	vin->compose.height = vin->format.height;
-}
-
 static int rvin_reset_format(struct rvin_dev *vin)
 {
 	struct v4l2_subdev_format fmt = {
 		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+		.pad = vin->digital->source_pad,
 	};
-	struct v4l2_mbus_framefmt *mf = &fmt.format;
 	int ret;
 
-	fmt.pad = vin->digital->source_pad;
-
 	ret = v4l2_subdev_call(vin_to_source(vin), pad, get_fmt, NULL, &fmt);
 	if (ret)
 		return ret;
 
-	vin->format.width	= mf->width;
-	vin->format.height	= mf->height;
-	vin->format.colorspace	= mf->colorspace;
-	vin->format.field	= mf->field;
+	v4l2_fill_pix_format(&vin->format, &fmt.format);
 
-	rvin_reset_crop_compose(vin);
+	rvin_format_align(vin, &vin->format);
 
-	vin->format.bytesperline = rvin_format_bytesperline(&vin->format);
-	vin->format.sizeimage = rvin_format_sizeimage(&vin->format);
+	vin->source.top = 0;
+	vin->source.left = 0;
+	vin->source.width = vin->format.width;
+	vin->source.height = vin->format.height;
+
+	vin->crop = vin->source;
+	vin->compose = vin->source;
 
 	return 0;
 }
 
-static int __rvin_try_format_source(struct rvin_dev *vin,
-				    u32 which,
-				    struct v4l2_pix_format *pix,
-				    struct rvin_source_fmt *source)
+static int rvin_try_format(struct rvin_dev *vin, u32 which,
+			   struct v4l2_pix_format *pix,
+			   struct v4l2_rect *crop, struct v4l2_rect *compose)
 {
-	struct v4l2_subdev *sd;
+	struct v4l2_subdev *sd = vin_to_source(vin);
 	struct v4l2_subdev_pad_config *pad_cfg;
 	struct v4l2_subdev_format format = {
 		.which = which,
+		.pad = vin->digital->source_pad,
 	};
 	enum v4l2_field field;
 	u32 width, height;
 	int ret;
 
-	sd = vin_to_source(vin);
-
-	v4l2_fill_mbus_format(&format.format, pix, vin->digital->code);
-
 	pad_cfg = v4l2_subdev_alloc_pad_config(sd);
 	if (pad_cfg == NULL)
 		return -ENOMEM;
 
-	format.pad = vin->digital->source_pad;
+	if (!rvin_format_from_pixel(pix->pixelformat) ||
+	    (vin->info->model == RCAR_M1 &&
+	     pix->pixelformat == V4L2_PIX_FMT_XBGR32))
+		pix->pixelformat = RVIN_DEFAULT_FORMAT;
+
+	v4l2_fill_mbus_format(&format.format, pix, vin->digital->code);
 
 	/* Allow the video device to override field and to scale */
 	field = pix->field;
@@ -211,8 +199,19 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 
 	v4l2_fill_pix_format(pix, &format.format);
 
-	source->width = pix->width;
-	source->height = pix->height;
+	if (crop) {
+		crop->top = 0;
+		crop->left = 0;
+		crop->width = pix->width;
+		crop->height = pix->height;
+
+		/*
+		 * If source is ALTERNATE the driver will use the VIN hardware
+		 * to INTERLACE it. The crop height then needs to be doubled.
+		 */
+		if (pix->field == V4L2_FIELD_ALTERNATE)
+			crop->height *= 2;
+	}
 
 	if (field != V4L2_FIELD_ANY)
 		pix->field = field;
@@ -220,32 +219,18 @@ static int __rvin_try_format_source(struct rvin_dev *vin,
 	pix->width = width;
 	pix->height = height;
 
-	vin_dbg(vin, "Source resolution: %ux%u\n", source->width,
-		source->height);
+	rvin_format_align(vin, pix);
 
+	if (compose) {
+		compose->top = 0;
+		compose->left = 0;
+		compose->width = pix->width;
+		compose->height = pix->height;
+	}
 done:
 	v4l2_subdev_free_pad_config(pad_cfg);
-	return ret;
-}
 
-static int __rvin_try_format(struct rvin_dev *vin,
-			     u32 which,
-			     struct v4l2_pix_format *pix,
-			     struct rvin_source_fmt *source)
-{
-	int ret;
-
-	if (!rvin_format_from_pixel(pix->pixelformat) ||
-	    (vin->info->model == RCAR_M1 &&
-	     pix->pixelformat == V4L2_PIX_FMT_XBGR32))
-		pix->pixelformat = RVIN_DEFAULT_FORMAT;
-
-	/* Limit to source capabilities */
-	ret = __rvin_try_format_source(vin, which, pix, source);
-	if (ret)
-		return ret;
-
-	return rvin_format_align(vin, pix);
+	return 0;
 }
 
 static int rvin_querycap(struct file *file, void *priv,
@@ -264,33 +249,30 @@ static int rvin_try_fmt_vid_cap(struct file *file, void *priv,
 				struct v4l2_format *f)
 {
 	struct rvin_dev *vin = video_drvdata(file);
-	struct rvin_source_fmt source;
 
-	return __rvin_try_format(vin, V4L2_SUBDEV_FORMAT_TRY, &f->fmt.pix,
-				 &source);
+	return rvin_try_format(vin, V4L2_SUBDEV_FORMAT_TRY, &f->fmt.pix, NULL,
+			       NULL);
 }
 
 static int rvin_s_fmt_vid_cap(struct file *file, void *priv,
 			      struct v4l2_format *f)
 {
 	struct rvin_dev *vin = video_drvdata(file);
-	struct rvin_source_fmt source;
+	struct v4l2_rect crop, compose;
 	int ret;
 
 	if (vb2_is_busy(&vin->queue))
 		return -EBUSY;
 
-	ret = __rvin_try_format(vin, V4L2_SUBDEV_FORMAT_ACTIVE, &f->fmt.pix,
-				&source);
+	ret = rvin_try_format(vin, V4L2_SUBDEV_FORMAT_ACTIVE, &f->fmt.pix,
+			      &crop, &compose);
 	if (ret)
 		return ret;
 
-	vin->source.width = source.width;
-	vin->source.height = source.height;
-
 	vin->format = f->fmt.pix;
-
-	rvin_reset_crop_compose(vin);
+	vin->crop = crop;
+	vin->compose = compose;
+	vin->source = crop;
 
 	return 0;
 }
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 1c91b774205a7750..e940366d7e8d0e76 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -46,16 +46,6 @@ enum rvin_dma_state {
 	STOPPING,
 };
 
-/**
- * struct rvin_source_fmt - Source information
- * @width:	Width from source
- * @height:	Height from source
- */
-struct rvin_source_fmt {
-	u32 width;
-	u32 height;
-};
-
 /**
  * struct rvin_video_format - Data format stored in memory
  * @fourcc:	Pixelformat
@@ -123,11 +113,11 @@ struct rvin_info {
  * @sequence:		V4L2 buffers sequence number
  * @state:		keeps track of operation state
  *
- * @source:		active format from the video source
  * @format:		active V4L2 pixel format
  *
  * @crop:		active cropping
  * @compose:		active composing
+ * @source:		active size of the video source
  */
 struct rvin_dev {
 	struct device *dev;
@@ -151,11 +141,11 @@ struct rvin_dev {
 	unsigned int sequence;
 	enum rvin_dma_state state;
 
-	struct rvin_source_fmt source;
 	struct v4l2_pix_format format;
 
 	struct v4l2_rect crop;
 	struct v4l2_rect compose;
+	struct v4l2_rect source;
 };
 
 #define vin_to_source(vin)		((vin)->digital->subdev)
-- 
2.16.2

[PATCH v14 17/33] rcar-vin: cache video standard

[Niklas Söderlund]

At stream on time the driver should not query the subdevice for which
standard are used. Instead it should be cached when userspace sets the
standard and used at stream on time.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c |  6 ++++++
 drivers/media/platform/rcar-vin/rcar-dma.c  |  7 ++-----
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 10 ++++++++--
 drivers/media/platform/rcar-vin/rcar-vin.h  |  2 ++
 4 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index be49d8968f0a0cef..8c251687e81b345b 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -96,6 +96,12 @@ static int rvin_digital_subdevice_attach(struct rvin_dev *vin,
 	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
 		return ret;
 
+	/* Read standard */
+	vin->std = V4L2_STD_UNKNOWN;
+	ret = v4l2_subdev_call(subdev, video, g_std, &vin->std);
+	if (ret < 0 && ret != -ENOIOCTLCMD)
+		return ret;
+
 	/* Add the controls */
 	ret = v4l2_ctrl_handler_init(&vin->ctrl_handler, 16);
 	if (ret < 0)
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 9233924e5b52de5f..79f4074b931b5aeb 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -592,7 +592,6 @@ void rvin_crop_scale_comp(struct rvin_dev *vin)
 static int rvin_setup(struct rvin_dev *vin)
 {
 	u32 vnmc, dmr, dmr2, interrupts;
-	v4l2_std_id std;
 	bool progressive = false, output_is_yuv = false, input_is_yuv = false;
 
 	switch (vin->format.field) {
@@ -606,10 +605,8 @@ static int rvin_setup(struct rvin_dev *vin)
 		/* Default to TB */
 		vnmc = VNMC_IM_FULL;
 		/* Use BT if video standard can be read and is 60 Hz format */
-		if (!v4l2_subdev_call(vin_to_source(vin), video, g_std, &std)) {
-			if (std & V4L2_STD_525_60)
-				vnmc = VNMC_IM_FULL | VNMC_FOC;
-		}
+		if (vin->std & V4L2_STD_525_60)
+			vnmc = VNMC_IM_FULL | VNMC_FOC;
 		break;
 	case V4L2_FIELD_INTERLACED_TB:
 		vnmc = VNMC_IM_FULL;
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 9eddc2d95ea7d341..ee8044992eca1a35 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -475,6 +475,8 @@ static int rvin_s_std(struct file *file, void *priv, v4l2_std_id a)
 	if (ret < 0)
 		return ret;
 
+	vin->std = a;
+
 	/* Changing the standard will change the width/height */
 	return rvin_reset_format(vin);
 }
@@ -482,9 +484,13 @@ static int rvin_s_std(struct file *file, void *priv, v4l2_std_id a)
 static int rvin_g_std(struct file *file, void *priv, v4l2_std_id *a)
 {
 	struct rvin_dev *vin = video_drvdata(file);
-	struct v4l2_subdev *sd = vin_to_source(vin);
 
-	return v4l2_subdev_call(sd, video, g_std, a);
+	if (v4l2_subdev_has_op(vin_to_source(vin), pad, dv_timings_cap))
+		return -ENOIOCTLCMD;
+
+	*a = vin->std;
+
+	return 0;
 }
 
 static int rvin_subscribe_event(struct v4l2_fh *fh,
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index e940366d7e8d0e76..06cec4f8e5ffaf2b 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -118,6 +118,7 @@ struct rvin_info {
  * @crop:		active cropping
  * @compose:		active composing
  * @source:		active size of the video source
+ * @std:		active video standard of the video source
  */
 struct rvin_dev {
 	struct device *dev;
@@ -146,6 +147,7 @@ struct rvin_dev {
 	struct v4l2_rect crop;
 	struct v4l2_rect compose;
 	struct v4l2_rect source;
+	v4l2_std_id std;
 };
 
 #define vin_to_source(vin)		((vin)->digital->subdev)
-- 
2.16.2

[PATCH v14 18/33] rcar-vin: move media bus configuration to struct rvin_dev

[Niklas Söderlund]

Bus configuration will once the driver is extended to support Gen3
contain information not specific to only the directly connected parallel
subdevice. Move it to struct rvin_dev to show it's not always coupled
to the parallel subdevice.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 18 +++++++++---------
 drivers/media/platform/rcar-vin/rcar-dma.c  | 10 +++++-----
 drivers/media/platform/rcar-vin/rcar-v4l2.c |  2 +-
 drivers/media/platform/rcar-vin/rcar-vin.h  |  9 ++++-----
 4 files changed, 19 insertions(+), 20 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 8c251687e81b345b..07a04d4bcc91b18b 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -65,10 +65,10 @@ static int rvin_digital_subdevice_attach(struct rvin_dev *vin,
 	vin->digital->sink_pad = ret < 0 ? 0 : ret;
 
 	/* Find compatible subdevices mbus format */
-	vin->digital->code = 0;
+	vin->mbus_code = 0;
 	code.index = 0;
 	code.pad = vin->digital->source_pad;
-	while (!vin->digital->code &&
+	while (!vin->mbus_code &&
 	       !v4l2_subdev_call(subdev, pad, enum_mbus_code, NULL, &code)) {
 		code.index++;
 		switch (code.code) {
@@ -76,16 +76,16 @@ static int rvin_digital_subdevice_attach(struct rvin_dev *vin,
 		case MEDIA_BUS_FMT_UYVY8_2X8:
 		case MEDIA_BUS_FMT_UYVY10_2X10:
 		case MEDIA_BUS_FMT_RGB888_1X24:
-			vin->digital->code = code.code;
+			vin->mbus_code = code.code;
 			vin_dbg(vin, "Found media bus format for %s: %d\n",
-				subdev->name, vin->digital->code);
+				subdev->name, vin->mbus_code);
 			break;
 		default:
 			break;
 		}
 	}
 
-	if (!vin->digital->code) {
+	if (!vin->mbus_code) {
 		vin_err(vin, "Unsupported media bus format for %s\n",
 			subdev->name);
 		return -EINVAL;
@@ -196,16 +196,16 @@ static int rvin_digital_parse_v4l2(struct device *dev,
 	if (vep->base.port || vep->base.id)
 		return -ENOTCONN;
 
-	rvge->mbus_cfg.type = vep->bus_type;
+	vin->mbus_cfg.type = vep->bus_type;
 
-	switch (rvge->mbus_cfg.type) {
+	switch (vin->mbus_cfg.type) {
 	case V4L2_MBUS_PARALLEL:
 		vin_dbg(vin, "Found PARALLEL media bus\n");
-		rvge->mbus_cfg.flags = vep->bus.parallel.flags;
+		vin->mbus_cfg.flags = vep->bus.parallel.flags;
 		break;
 	case V4L2_MBUS_BT656:
 		vin_dbg(vin, "Found BT656 media bus\n");
-		rvge->mbus_cfg.flags = 0;
+		vin->mbus_cfg.flags = 0;
 		break;
 	default:
 		vin_err(vin, "Unknown media bus type\n");
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 79f4074b931b5aeb..41907a200037d5d5 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -626,7 +626,7 @@ static int rvin_setup(struct rvin_dev *vin)
 	/*
 	 * Input interface
 	 */
-	switch (vin->digital->code) {
+	switch (vin->mbus_code) {
 	case MEDIA_BUS_FMT_YUYV8_1X16:
 		/* BT.601/BT.1358 16bit YCbCr422 */
 		vnmc |= VNMC_INF_YUV16;
@@ -634,7 +634,7 @@ static int rvin_setup(struct rvin_dev *vin)
 		break;
 	case MEDIA_BUS_FMT_UYVY8_2X8:
 		/* BT.656 8bit YCbCr422 or BT.601 8bit YCbCr422 */
-		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+		vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ?
 			VNMC_INF_YUV8_BT656 : VNMC_INF_YUV8_BT601;
 		input_is_yuv = true;
 		break;
@@ -643,7 +643,7 @@ static int rvin_setup(struct rvin_dev *vin)
 		break;
 	case MEDIA_BUS_FMT_UYVY10_2X10:
 		/* BT.656 10bit YCbCr422 or BT.601 10bit YCbCr422 */
-		vnmc |= vin->digital->mbus_cfg.type == V4L2_MBUS_BT656 ?
+		vnmc |= vin->mbus_cfg.type == V4L2_MBUS_BT656 ?
 			VNMC_INF_YUV10_BT656 : VNMC_INF_YUV10_BT601;
 		input_is_yuv = true;
 		break;
@@ -655,11 +655,11 @@ static int rvin_setup(struct rvin_dev *vin)
 	dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
 
 	/* Hsync Signal Polarity Select */
-	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
+	if (!(vin->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
 		dmr2 |= VNDMR2_HPS;
 
 	/* Vsync Signal Polarity Select */
-	if (!(vin->digital->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
+	if (!(vin->mbus_cfg.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW))
 		dmr2 |= VNDMR2_VPS;
 
 	/*
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index ee8044992eca1a35..e4a99ef210044ab1 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -186,7 +186,7 @@ static int rvin_try_format(struct rvin_dev *vin, u32 which,
 	     pix->pixelformat == V4L2_PIX_FMT_XBGR32))
 		pix->pixelformat = RVIN_DEFAULT_FORMAT;
 
-	v4l2_fill_mbus_format(&format.format, pix, vin->digital->code);
+	v4l2_fill_mbus_format(&format.format, pix, vin->mbus_code);
 
 	/* Allow the video device to override field and to scale */
 	field = pix->field;
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 06cec4f8e5ffaf2b..952d57f32873388d 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -60,8 +60,6 @@ struct rvin_video_format {
  * struct rvin_graph_entity - Video endpoint from async framework
  * @asd:	sub-device descriptor for async framework
  * @subdev:	subdevice matched using async framework
- * @code:	Media bus format from source
- * @mbus_cfg:	Media bus format from DT
  * @source_pad:	source pad of remote subdevice
  * @sink_pad:	sink pad of remote subdevice
  */
@@ -69,9 +67,6 @@ struct rvin_graph_entity {
 	struct v4l2_async_subdev asd;
 	struct v4l2_subdev *subdev;
 
-	u32 code;
-	struct v4l2_mbus_config mbus_cfg;
-
 	unsigned int source_pad;
 	unsigned int sink_pad;
 };
@@ -113,6 +108,8 @@ struct rvin_info {
  * @sequence:		V4L2 buffers sequence number
  * @state:		keeps track of operation state
  *
+ * @mbus_cfg:		media bus configuration from DT
+ * @mbus_code:		media bus format code
  * @format:		active V4L2 pixel format
  *
  * @crop:		active cropping
@@ -142,6 +139,8 @@ struct rvin_dev {
 	unsigned int sequence;
 	enum rvin_dma_state state;
 
+	struct v4l2_mbus_config mbus_cfg;
+	u32 mbus_code;
 	struct v4l2_pix_format format;
 
 	struct v4l2_rect crop;
-- 
2.16.2

[PATCH v14 19/33] rcar-vin: enable Gen3 hardware configuration

[Niklas Söderlund]

Add the register needed to work with Gen3 hardware. This patch adds
the logic for how to work with the Gen3 hardware. More work is required
to enable the subdevice structure needed to configure capturing.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---

* Changes since v13
- Remove VNCSI_IFMD_DES2 define as the later versions of the datasheet
  have been updated to remove the register as pointed out by Koji
  Matsuoka.
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 93 ++++++++++++++++++++----------
 drivers/media/platform/rcar-vin/rcar-vin.h |  1 +
 2 files changed, 63 insertions(+), 31 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 41907a200037d5d5..482d89bae657a88e 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -33,21 +33,23 @@
 #define VNELPRC_REG	0x10	/* Video n End Line Pre-Clip Register */
 #define VNSPPRC_REG	0x14	/* Video n Start Pixel Pre-Clip Register */
 #define VNEPPRC_REG	0x18	/* Video n End Pixel Pre-Clip Register */
-#define VNSLPOC_REG	0x1C	/* Video n Start Line Post-Clip Register */
-#define VNELPOC_REG	0x20	/* Video n End Line Post-Clip Register */
-#define VNSPPOC_REG	0x24	/* Video n Start Pixel Post-Clip Register */
-#define VNEPPOC_REG	0x28	/* Video n End Pixel Post-Clip Register */
 #define VNIS_REG	0x2C	/* Video n Image Stride Register */
 #define VNMB_REG(m)	(0x30 + ((m) << 2)) /* Video n Memory Base m Register */
 #define VNIE_REG	0x40	/* Video n Interrupt Enable Register */
 #define VNINTS_REG	0x44	/* Video n Interrupt Status Register */
 #define VNSI_REG	0x48	/* Video n Scanline Interrupt Register */
 #define VNMTC_REG	0x4C	/* Video n Memory Transfer Control Register */
-#define VNYS_REG	0x50	/* Video n Y Scale Register */
-#define VNXS_REG	0x54	/* Video n X Scale Register */
 #define VNDMR_REG	0x58	/* Video n Data Mode Register */
 #define VNDMR2_REG	0x5C	/* Video n Data Mode Register 2 */
 #define VNUVAOF_REG	0x60	/* Video n UV Address Offset Register */
+
+/* Register offsets specific for Gen2 */
+#define VNSLPOC_REG	0x1C	/* Video n Start Line Post-Clip Register */
+#define VNELPOC_REG	0x20	/* Video n End Line Post-Clip Register */
+#define VNSPPOC_REG	0x24	/* Video n Start Pixel Post-Clip Register */
+#define VNEPPOC_REG	0x28	/* Video n End Pixel Post-Clip Register */
+#define VNYS_REG	0x50	/* Video n Y Scale Register */
+#define VNXS_REG	0x54	/* Video n X Scale Register */
 #define VNC1A_REG	0x80	/* Video n Coefficient Set C1A Register */
 #define VNC1B_REG	0x84	/* Video n Coefficient Set C1B Register */
 #define VNC1C_REG	0x88	/* Video n Coefficient Set C1C Register */
@@ -73,9 +75,13 @@
 #define VNC8B_REG	0xF4	/* Video n Coefficient Set C8B Register */
 #define VNC8C_REG	0xF8	/* Video n Coefficient Set C8C Register */
 
+/* Register offsets specific for Gen3 */
+#define VNCSI_IFMD_REG		0x20 /* Video n CSI2 Interface Mode Register */
 
 /* Register bit fields for R-Car VIN */
 /* Video n Main Control Register bits */
+#define VNMC_DPINE		(1 << 27) /* Gen3 specific */
+#define VNMC_SCLE		(1 << 26) /* Gen3 specific */
 #define VNMC_FOC		(1 << 21)
 #define VNMC_YCAL		(1 << 19)
 #define VNMC_INF_YUV8_BT656	(0 << 16)
@@ -119,6 +125,12 @@
 #define VNDMR2_FTEV		(1 << 17)
 #define VNDMR2_VLV(n)		((n & 0xf) << 12)
 
+/* Video n CSI2 Interface Mode Register (Gen3) */
+#define VNCSI_IFMD_DES1		(1 << 26)
+#define VNCSI_IFMD_DES0		(1 << 25)
+#define VNCSI_IFMD_CSI_CHSEL(n) (((n) & 0xf) << 0)
+#define VNCSI_IFMD_CSI_CHSEL_MASK 0xf
+
 struct rvin_buffer {
 	struct vb2_v4l2_buffer vb;
 	struct list_head list;
@@ -514,28 +526,10 @@ static void rvin_set_coeff(struct rvin_dev *vin, unsigned short xs)
 	rvin_write(vin, p_set->coeff_set[23], VNC8C_REG);
 }
 
-void rvin_crop_scale_comp(struct rvin_dev *vin)
+static void rvin_crop_scale_comp_gen2(struct rvin_dev *vin)
 {
 	u32 xs, ys;
 
-	/* Set Start/End Pixel/Line Pre-Clip */
-	rvin_write(vin, vin->crop.left, VNSPPRC_REG);
-	rvin_write(vin, vin->crop.left + vin->crop.width - 1, VNEPPRC_REG);
-	switch (vin->format.field) {
-	case V4L2_FIELD_INTERLACED:
-	case V4L2_FIELD_INTERLACED_TB:
-	case V4L2_FIELD_INTERLACED_BT:
-		rvin_write(vin, vin->crop.top / 2, VNSLPRC_REG);
-		rvin_write(vin, (vin->crop.top + vin->crop.height) / 2 - 1,
-			   VNELPRC_REG);
-		break;
-	default:
-		rvin_write(vin, vin->crop.top, VNSLPRC_REG);
-		rvin_write(vin, vin->crop.top + vin->crop.height - 1,
-			   VNELPRC_REG);
-		break;
-	}
-
 	/* Set scaling coefficient */
 	ys = 0;
 	if (vin->crop.height != vin->compose.height)
@@ -573,11 +567,6 @@ void rvin_crop_scale_comp(struct rvin_dev *vin)
 		break;
 	}
 
-	if (vin->format.pixelformat == V4L2_PIX_FMT_NV16)
-		rvin_write(vin, ALIGN(vin->format.width, 0x20), VNIS_REG);
-	else
-		rvin_write(vin, ALIGN(vin->format.width, 0x10), VNIS_REG);
-
 	vin_dbg(vin,
 		"Pre-Clip: %ux%u@%u:%u YS: %d XS: %d Post-Clip: %ux%u@%u:%u\n",
 		vin->crop.width, vin->crop.height, vin->crop.left,
@@ -585,6 +574,37 @@ void rvin_crop_scale_comp(struct rvin_dev *vin)
 		0, 0);
 }
 
+void rvin_crop_scale_comp(struct rvin_dev *vin)
+{
+	/* Set Start/End Pixel/Line Pre-Clip */
+	rvin_write(vin, vin->crop.left, VNSPPRC_REG);
+	rvin_write(vin, vin->crop.left + vin->crop.width - 1, VNEPPRC_REG);
+
+	switch (vin->format.field) {
+	case V4L2_FIELD_INTERLACED:
+	case V4L2_FIELD_INTERLACED_TB:
+	case V4L2_FIELD_INTERLACED_BT:
+		rvin_write(vin, vin->crop.top / 2, VNSLPRC_REG);
+		rvin_write(vin, (vin->crop.top + vin->crop.height) / 2 - 1,
+			   VNELPRC_REG);
+		break;
+	default:
+		rvin_write(vin, vin->crop.top, VNSLPRC_REG);
+		rvin_write(vin, vin->crop.top + vin->crop.height - 1,
+			   VNELPRC_REG);
+		break;
+	}
+
+	/* TODO: Add support for the UDS scaler. */
+	if (vin->info->model != RCAR_GEN3)
+		rvin_crop_scale_comp_gen2(vin);
+
+	if (vin->format.pixelformat == V4L2_PIX_FMT_NV16)
+		rvin_write(vin, ALIGN(vin->format.width, 0x20), VNIS_REG);
+	else
+		rvin_write(vin, ALIGN(vin->format.width, 0x10), VNIS_REG);
+}
+
 /* -----------------------------------------------------------------------------
  * Hardware setup
  */
@@ -652,7 +672,10 @@ static int rvin_setup(struct rvin_dev *vin)
 	}
 
 	/* Enable VSYNC Field Toogle mode after one VSYNC input */
-	dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
+	if (vin->info->model == RCAR_GEN3)
+		dmr2 = VNDMR2_FTEV;
+	else
+		dmr2 = VNDMR2_FTEV | VNDMR2_VLV(1);
 
 	/* Hsync Signal Polarity Select */
 	if (!(vin->mbus_cfg.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW))
@@ -704,6 +727,14 @@ static int rvin_setup(struct rvin_dev *vin)
 	if (input_is_yuv == output_is_yuv)
 		vnmc |= VNMC_BPS;
 
+	if (vin->info->model == RCAR_GEN3) {
+		/* Select between CSI-2 and Digital input */
+		if (vin->mbus_cfg.type == V4L2_MBUS_CSI2)
+			vnmc &= ~VNMC_DPINE;
+		else
+			vnmc |= VNMC_DPINE;
+	}
+
 	/* Progressive or interlaced mode */
 	interrupts = progressive ? VNIE_FIE : VNIE_EFE;
 
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 952d57f32873388d..321283f1618ae0b9 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -33,6 +33,7 @@ enum model_id {
 	RCAR_H1,
 	RCAR_M1,
 	RCAR_GEN2,
+	RCAR_GEN3,
 };
 
 /**
-- 
2.16.2

[PATCH v14 20/33] rcar-vin: add function to manipulate Gen3 chsel value

[Niklas Söderlund]

On Gen3 the CSI-2 routing is controlled by the VnCSI_IFMD register. One
feature of this register is that it's only present in the VIN0 and VIN4
instances. The register in VIN0 controls the routing for VIN0-3 and the
register in VIN4 controls routing for VIN4-7.

To be able to control routing from a media device this function is need
to control runtime PM for the subgroup master (VIN0 and VIN4). The
subgroup master must be switched on before the register is manipulated,
once the operation is complete it's safe to switch the master off and
the new routing will still be in effect.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>

---

* Changes since v13
- Do not set the VNCSI_IFMD_DES2 bit in the VNCSI_IFMD register as that
  bit have been removed from later versions of the datasheet.
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 37 ++++++++++++++++++++++++++++++
 drivers/media/platform/rcar-vin/rcar-vin.h |  2 ++
 2 files changed, 39 insertions(+)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 482d89bae657a88e..905d975b2909a867 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -16,6 +16,7 @@
 
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
 
 #include <media/videobuf2-dma-contig.h>
 
@@ -1157,3 +1158,39 @@ int rvin_dma_register(struct rvin_dev *vin, int irq)
 
 	return ret;
 }
+
+/* -----------------------------------------------------------------------------
+ * Gen3 CHSEL manipulation
+ */
+
+/*
+ * There is no need to have locking around changing the routing
+ * as it's only possible to do so when no VIN in the group is
+ * streaming so nothing can race with the VNMC register.
+ */
+int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel)
+{
+	u32 ifmd, vnmc;
+	int ret;
+
+	ret = pm_runtime_get_sync(vin->dev);
+	if (ret < 0)
+		return ret;
+
+	/* Make register writes take effect immediately. */
+	vnmc = rvin_read(vin, VNMC_REG);
+	rvin_write(vin, vnmc & ~VNMC_VUP, VNMC_REG);
+
+	ifmd = VNCSI_IFMD_DES1 | VNCSI_IFMD_DES0 | VNCSI_IFMD_CSI_CHSEL(chsel);
+
+	rvin_write(vin, ifmd, VNCSI_IFMD_REG);
+
+	vin_dbg(vin, "Set IFMD 0x%x\n", ifmd);
+
+	/* Restore VNMC. */
+	rvin_write(vin, vnmc, VNMC_REG);
+
+	pm_runtime_put(vin->dev);
+
+	return ret;
+}
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 321283f1618ae0b9..c19ddc5e08cbbea4 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -169,4 +169,6 @@ const struct rvin_video_format *rvin_format_from_pixel(u32 pixelformat);
 /* Cropping, composing and scaling */
 void rvin_crop_scale_comp(struct rvin_dev *vin);
 
+int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel);
+
 #endif
-- 
2.16.2

[PATCH v14 21/33] rcar-vin: add flag to switch to media controller mode

[Niklas Söderlund]

On Gen3 a media controller API needs to be used to allow userspace to
configure the subdevices in the pipeline instead of directly controlling
a single source subdevice, which is and will continue to be the mode of
operation on Gen2.

Prepare for these two modes of operation by adding a flag to struct
rvin_info which will control which mode to use.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 6 +++++-
 drivers/media/platform/rcar-vin/rcar-vin.h  | 2 ++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 07a04d4bcc91b18b..c0e0412e2ecd9487 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -249,18 +249,21 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
 
 static const struct rvin_info rcar_info_h1 = {
 	.model = RCAR_H1,
+	.use_mc = false,
 	.max_width = 2048,
 	.max_height = 2048,
 };
 
 static const struct rvin_info rcar_info_m1 = {
 	.model = RCAR_M1,
+	.use_mc = false,
 	.max_width = 2048,
 	.max_height = 2048,
 };
 
 static const struct rvin_info rcar_info_gen2 = {
 	.model = RCAR_GEN2,
+	.use_mc = false,
 	.max_width = 2048,
 	.max_height = 2048,
 };
@@ -355,7 +358,8 @@ static int rcar_vin_remove(struct platform_device *pdev)
 	v4l2_async_notifier_unregister(&vin->notifier);
 	v4l2_async_notifier_cleanup(&vin->notifier);
 
-	v4l2_ctrl_handler_free(&vin->ctrl_handler);
+	if (!vin->info->use_mc)
+		v4l2_ctrl_handler_free(&vin->ctrl_handler);
 
 	rvin_dma_unregister(vin);
 
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index c19ddc5e08cbbea4..e5668c1120a67899 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -75,11 +75,13 @@ struct rvin_graph_entity {
 /**
  * struct rvin_info - Information about the particular VIN implementation
  * @model:		VIN model
+ * @use_mc:		use media controller instead of controlling subdevice
  * @max_width:		max input width the VIN supports
  * @max_height:		max input height the VIN supports
  */
 struct rvin_info {
 	enum model_id model;
+	bool use_mc;
 
 	unsigned int max_width;
 	unsigned int max_height;
-- 
2.16.2

[PATCH v14 22/33] rcar-vin: use different v4l2 operations in media controller mode

[Niklas Söderlund]

When the driver runs in media controller mode it should not directly
control the subdevice instead userspace will be responsible for
configuring the pipeline. To be able to run in this mode a different set
of v4l2 operations needs to be used.

Add a new set of v4l2 operations to support operation without directly
interacting with the source subdevice.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---

* Changes since v13
- Add review from Laurent.

* Changes since v11
- Fixed error labels name in rvin_mc_open().
---
 drivers/media/platform/rcar-vin/rcar-dma.c  |   2 +-
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 158 +++++++++++++++++++++++++++-
 2 files changed, 156 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 905d975b2909a867..d70a689d9dd3713f 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -626,7 +626,7 @@ static int rvin_setup(struct rvin_dev *vin)
 		/* Default to TB */
 		vnmc = VNMC_IM_FULL;
 		/* Use BT if video standard can be read and is 60 Hz format */
-		if (vin->std & V4L2_STD_525_60)
+		if (!vin->info->use_mc && vin->std & V4L2_STD_525_60)
 			vnmc = VNMC_IM_FULL | VNMC_FOC;
 		break;
 	case V4L2_FIELD_INTERLACED_TB:
diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index e4a99ef210044ab1..f07cb4e6fbdec4eb 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -18,12 +18,16 @@
 
 #include <media/v4l2-event.h>
 #include <media/v4l2-ioctl.h>
+#include <media/v4l2-mc.h>
 #include <media/v4l2-rect.h>
 
 #include "rcar-vin.h"
 
 #define RVIN_DEFAULT_FORMAT	V4L2_PIX_FMT_YUYV
+#define RVIN_DEFAULT_WIDTH	800
+#define RVIN_DEFAULT_HEIGHT	600
 #define RVIN_DEFAULT_FIELD	V4L2_FIELD_NONE
+#define RVIN_DEFAULT_COLORSPACE	V4L2_COLORSPACE_SRGB
 
 /* -----------------------------------------------------------------------------
  * Format Conversions
@@ -654,6 +658,73 @@ static const struct v4l2_ioctl_ops rvin_ioctl_ops = {
 	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
 };
 
+/* -----------------------------------------------------------------------------
+ * V4L2 Media Controller
+ */
+
+static int rvin_mc_try_fmt_vid_cap(struct file *file, void *priv,
+				   struct v4l2_format *f)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+
+	rvin_format_align(vin, &f->fmt.pix);
+
+	return 0;
+}
+
+static int rvin_mc_s_fmt_vid_cap(struct file *file, void *priv,
+				 struct v4l2_format *f)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+
+	if (vb2_is_busy(&vin->queue))
+		return -EBUSY;
+
+	rvin_format_align(vin, &f->fmt.pix);
+
+	vin->format = f->fmt.pix;
+
+	return 0;
+}
+
+static int rvin_mc_enum_input(struct file *file, void *priv,
+			      struct v4l2_input *i)
+{
+	if (i->index != 0)
+		return -EINVAL;
+
+	i->type = V4L2_INPUT_TYPE_CAMERA;
+	strlcpy(i->name, "Camera", sizeof(i->name));
+
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops rvin_mc_ioctl_ops = {
+	.vidioc_querycap		= rvin_querycap,
+	.vidioc_try_fmt_vid_cap		= rvin_mc_try_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap		= rvin_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap		= rvin_mc_s_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap	= rvin_enum_fmt_vid_cap,
+
+	.vidioc_enum_input		= rvin_mc_enum_input,
+	.vidioc_g_input			= rvin_g_input,
+	.vidioc_s_input			= rvin_s_input,
+
+	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
+	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
+	.vidioc_querybuf		= vb2_ioctl_querybuf,
+	.vidioc_qbuf			= vb2_ioctl_qbuf,
+	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
+	.vidioc_expbuf			= vb2_ioctl_expbuf,
+	.vidioc_prepare_buf		= vb2_ioctl_prepare_buf,
+	.vidioc_streamon		= vb2_ioctl_streamon,
+	.vidioc_streamoff		= vb2_ioctl_streamoff,
+
+	.vidioc_log_status		= v4l2_ctrl_log_status,
+	.vidioc_subscribe_event		= rvin_subscribe_event,
+	.vidioc_unsubscribe_event	= v4l2_event_unsubscribe,
+};
+
 /* -----------------------------------------------------------------------------
  * File Operations
  */
@@ -797,6 +868,74 @@ static const struct v4l2_file_operations rvin_fops = {
 	.read		= vb2_fop_read,
 };
 
+/* -----------------------------------------------------------------------------
+ * Media controller file operations
+ */
+
+static int rvin_mc_open(struct file *file)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+	int ret;
+
+	ret = mutex_lock_interruptible(&vin->lock);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_get_sync(vin->dev);
+	if (ret < 0)
+		goto err_unlock;
+
+	ret = v4l2_pipeline_pm_use(&vin->vdev.entity, 1);
+	if (ret < 0)
+		goto err_pm;
+
+	file->private_data = vin;
+
+	ret = v4l2_fh_open(file);
+	if (ret)
+		goto err_v4l2pm;
+
+	mutex_unlock(&vin->lock);
+
+	return 0;
+err_v4l2pm:
+	v4l2_pipeline_pm_use(&vin->vdev.entity, 0);
+err_pm:
+	pm_runtime_put(vin->dev);
+err_unlock:
+	mutex_unlock(&vin->lock);
+
+	return ret;
+}
+
+static int rvin_mc_release(struct file *file)
+{
+	struct rvin_dev *vin = video_drvdata(file);
+	int ret;
+
+	mutex_lock(&vin->lock);
+
+	/* the release helper will cleanup any on-going streaming. */
+	ret = _vb2_fop_release(file, NULL);
+
+	v4l2_pipeline_pm_use(&vin->vdev.entity, 0);
+	pm_runtime_put(vin->dev);
+
+	mutex_unlock(&vin->lock);
+
+	return ret;
+}
+
+static const struct v4l2_file_operations rvin_mc_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= video_ioctl2,
+	.open		= rvin_mc_open,
+	.release	= rvin_mc_release,
+	.poll		= vb2_fop_poll,
+	.mmap		= vb2_fop_mmap,
+	.read		= vb2_fop_read,
+};
+
 void rvin_v4l2_unregister(struct rvin_dev *vin)
 {
 	if (!video_is_registered(&vin->vdev))
@@ -832,18 +971,31 @@ int rvin_v4l2_register(struct rvin_dev *vin)
 	vin->v4l2_dev.notify = rvin_notify;
 
 	/* video node */
-	vdev->fops = &rvin_fops;
 	vdev->v4l2_dev = &vin->v4l2_dev;
 	vdev->queue = &vin->queue;
 	strlcpy(vdev->name, KBUILD_MODNAME, sizeof(vdev->name));
 	vdev->release = video_device_release_empty;
-	vdev->ioctl_ops = &rvin_ioctl_ops;
 	vdev->lock = &vin->lock;
 	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
 		V4L2_CAP_READWRITE;
 
+	/* Set a default format */
 	vin->format.pixelformat	= RVIN_DEFAULT_FORMAT;
-	rvin_reset_format(vin);
+	vin->format.width = RVIN_DEFAULT_WIDTH;
+	vin->format.height = RVIN_DEFAULT_HEIGHT;
+	vin->format.field = RVIN_DEFAULT_FIELD;
+	vin->format.colorspace = RVIN_DEFAULT_COLORSPACE;
+
+	if (vin->info->use_mc) {
+		vdev->fops = &rvin_mc_fops;
+		vdev->ioctl_ops = &rvin_mc_ioctl_ops;
+	} else {
+		vdev->fops = &rvin_fops;
+		vdev->ioctl_ops = &rvin_ioctl_ops;
+		rvin_reset_format(vin);
+	}
+
+	rvin_format_align(vin, &vin->format);
 
 	ret = video_register_device(&vin->vdev, VFL_TYPE_GRABBER, -1);
 	if (ret) {
-- 
2.16.2

[PATCH v14 23/33] rcar-vin: force default colorspace for media centric mode

[Niklas Söderlund]

The V4L2 specification clearly documents the colorspace fields as being
set by drivers for capture devices. Using the values supplied by
userspace thus wouldn't comply with the API. Until the API is updated to
allow for userspace to set these Hans wants the fields to be set by the
driver to fixed values.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index f07cb4e6fbdec4eb..2c28daf1c725e64c 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -662,12 +662,30 @@ static const struct v4l2_ioctl_ops rvin_ioctl_ops = {
  * V4L2 Media Controller
  */
 
+static void rvin_mc_try_format(struct rvin_dev *vin,
+			       struct v4l2_pix_format *pix)
+{
+	/*
+	 * The V4L2 specification clearly documents the colorspace fields
+	 * as being set by drivers for capture devices. Using the values
+	 * supplied by userspace thus wouldn't comply with the API. Until
+	 * the API is updated force fixed vaules.
+	 */
+	pix->colorspace = RVIN_DEFAULT_COLORSPACE;
+	pix->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pix->colorspace);
+	pix->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pix->colorspace);
+	pix->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, pix->colorspace,
+							  pix->ycbcr_enc);
+
+	rvin_format_align(vin, pix);
+}
+
 static int rvin_mc_try_fmt_vid_cap(struct file *file, void *priv,
 				   struct v4l2_format *f)
 {
 	struct rvin_dev *vin = video_drvdata(file);
 
-	rvin_format_align(vin, &f->fmt.pix);
+	rvin_mc_try_format(vin, &f->fmt.pix);
 
 	return 0;
 }
@@ -680,7 +698,7 @@ static int rvin_mc_s_fmt_vid_cap(struct file *file, void *priv,
 	if (vb2_is_busy(&vin->queue))
 		return -EBUSY;
 
-	rvin_format_align(vin, &f->fmt.pix);
+	rvin_mc_try_format(vin, &f->fmt.pix);
 
 	vin->format = f->fmt.pix;
 
-- 
2.16.2

[PATCH v14 24/33] rcar-vin: prepare for media controller mode initialization

[Niklas Söderlund]

Prepare for media controller by calling a different initialization then
when running in device centric mode. Add trivial configuration of
the mbus and creation of the media pad for the video device entity.

While we are at it clearly mark the digital device centric notifier
functions with a comment.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 20 ++++++++++++++++++--
 drivers/media/platform/rcar-vin/rcar-vin.h  |  4 ++++
 2 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index c0e0412e2ecd9487..e0a33d372c500ccd 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -46,6 +46,10 @@ static int rvin_find_pad(struct v4l2_subdev *sd, int direction)
 	return -EINVAL;
 }
 
+/* -----------------------------------------------------------------------------
+ * Digital async notifier
+ */
+
 /* The vin lock should be held when calling the subdevice attach and detach */
 static int rvin_digital_subdevice_attach(struct rvin_dev *vin,
 					 struct v4l2_subdev *subdev)
@@ -243,6 +247,16 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
 	return 0;
 }
 
+static int rvin_mc_init(struct rvin_dev *vin)
+{
+	/* All our sources are CSI-2 */
+	vin->mbus_cfg.type = V4L2_MBUS_CSI2;
+	vin->mbus_cfg.flags = 0;
+
+	vin->pad.flags = MEDIA_PAD_FL_SINK;
+	return media_entity_pads_init(&vin->vdev.entity, 1, &vin->pad);
+}
+
 /* -----------------------------------------------------------------------------
  * Platform Device Driver
  */
@@ -331,8 +345,10 @@ static int rcar_vin_probe(struct platform_device *pdev)
 		return ret;
 
 	platform_set_drvdata(pdev, vin);
-
-	ret = rvin_digital_graph_init(vin);
+	if (vin->info->use_mc)
+		ret = rvin_mc_init(vin);
+	else
+		ret = rvin_digital_graph_init(vin);
 	if (ret < 0)
 		goto error;
 
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index e5668c1120a67899..5102ad254bff515b 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -99,6 +99,8 @@ struct rvin_info {
  * @notifier:		V4L2 asynchronous subdevs notifier
  * @digital:		entity in the DT for local digital subdevice
  *
+ * @pad:		media pad for the video device entity
+ *
  * @lock:		protects @queue
  * @queue:		vb2 buffers queue
  * @scratch:		cpu address for scratch buffer
@@ -131,6 +133,8 @@ struct rvin_dev {
 	struct v4l2_async_notifier notifier;
 	struct rvin_graph_entity *digital;
 
+	struct media_pad pad;
+
 	struct mutex lock;
 	struct vb2_queue queue;
 	void *scratch;
-- 
2.16.2

[PATCH v14 25/33] rcar-vin: add group allocator functions

[Niklas Söderlund]

In media controller mode all VIN instances needs to be part of the same
media graph. There is also a need for each VIN instance to know about
and in some cases be able to communicate with other VIN instances.

Add an allocator framework where the first VIN instance to be probed
creates a shared data structure and registers a media device.
Consecutive VINs insert themself into the global group.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 174 +++++++++++++++++++++++++++-
 drivers/media/platform/rcar-vin/rcar-vin.h  |  31 +++++
 2 files changed, 203 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index e0a33d372c500ccd..38eaa246e4c0a7b5 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -20,12 +20,174 @@
 #include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/slab.h>
 
 #include <media/v4l2-async.h>
 #include <media/v4l2-fwnode.h>
 
 #include "rcar-vin.h"
 
+/* -----------------------------------------------------------------------------
+ * Gen3 CSI2 Group Allocator
+ */
+
+/* FIXME:  This should if we find a system that supports more
+ * than one group for the whole system be replaced with a linked
+ * list of groups. And eventually all of this should be replaced
+ * with a global device allocator API.
+ *
+ * But for now this works as on all supported systems there will
+ * be only one group for all instances.
+ */
+
+static DEFINE_MUTEX(rvin_group_lock);
+static struct rvin_group *rvin_group_data;
+
+static void rvin_group_cleanup(struct rvin_group *group)
+{
+	media_device_unregister(&group->mdev);
+	media_device_cleanup(&group->mdev);
+	mutex_destroy(&group->lock);
+}
+
+static int rvin_group_init(struct rvin_group *group, struct rvin_dev *vin)
+{
+	struct media_device *mdev = &group->mdev;
+	const struct of_device_id *match;
+	struct device_node *np;
+	int ret;
+
+	mutex_init(&group->lock);
+
+	/* Count number of VINs in the system */
+	group->count = 0;
+	for_each_matching_node(np, vin->dev->driver->of_match_table)
+		if (of_device_is_available(np))
+			group->count++;
+
+	vin_dbg(vin, "found %u enabled VIN's in DT", group->count);
+
+	mdev->dev = vin->dev;
+
+	match = of_match_node(vin->dev->driver->of_match_table,
+			      vin->dev->of_node);
+
+	strlcpy(mdev->driver_name, KBUILD_MODNAME, sizeof(mdev->driver_name));
+	strlcpy(mdev->model, match->compatible, sizeof(mdev->model));
+	snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s",
+		 dev_name(mdev->dev));
+
+	media_device_init(mdev);
+
+	ret = media_device_register(&group->mdev);
+	if (ret)
+		rvin_group_cleanup(group);
+
+	return ret;
+}
+
+static void rvin_group_release(struct kref *kref)
+{
+	struct rvin_group *group =
+		container_of(kref, struct rvin_group, refcount);
+
+	mutex_lock(&rvin_group_lock);
+
+	rvin_group_data = NULL;
+
+	rvin_group_cleanup(group);
+
+	kfree(group);
+
+	mutex_unlock(&rvin_group_lock);
+}
+
+static int rvin_group_get(struct rvin_dev *vin)
+{
+	struct rvin_group *group;
+	u32 id;
+	int ret;
+
+	/* Make sure VIN id is present and sane */
+	ret = of_property_read_u32(vin->dev->of_node, "renesas,id", &id);
+	if (ret) {
+		vin_err(vin, "%pOF: No renesas,id property found\n",
+			vin->dev->of_node);
+		return -EINVAL;
+	}
+
+	if (id >= RCAR_VIN_NUM) {
+		vin_err(vin, "%pOF: Invalid renesas,id '%u'\n",
+			vin->dev->of_node, id);
+		return -EINVAL;
+	}
+
+	/* Join or create a VIN group */
+	mutex_lock(&rvin_group_lock);
+	if (rvin_group_data) {
+		group = rvin_group_data;
+		kref_get(&group->refcount);
+	} else {
+		group = kzalloc(sizeof(*group), GFP_KERNEL);
+		if (!group) {
+			ret = -ENOMEM;
+			goto err_group;
+		}
+
+		ret = rvin_group_init(group, vin);
+		if (ret) {
+			kfree(group);
+			vin_err(vin, "Failed to initialize group\n");
+			goto err_group;
+		}
+
+		kref_init(&group->refcount);
+
+		rvin_group_data = group;
+	}
+	mutex_unlock(&rvin_group_lock);
+
+	/* Add VIN to group */
+	mutex_lock(&group->lock);
+
+	if (group->vin[id]) {
+		vin_err(vin, "Duplicate renesas,id property value %u\n", id);
+		mutex_unlock(&group->lock);
+		kref_put(&group->refcount, rvin_group_release);
+		return -EINVAL;
+	}
+
+	group->vin[id] = vin;
+
+	vin->id = id;
+	vin->group = group;
+	vin->v4l2_dev.mdev = &group->mdev;
+
+	mutex_unlock(&group->lock);
+
+	return 0;
+err_group:
+	mutex_unlock(&rvin_group_lock);
+	return ret;
+}
+
+static void rvin_group_put(struct rvin_dev *vin)
+{
+	mutex_lock(&vin->group->lock);
+
+	vin->group = NULL;
+	vin->v4l2_dev.mdev = NULL;
+
+	if (WARN_ON(vin->group->vin[vin->id] != vin))
+		goto out;
+
+	vin->group->vin[vin->id] = NULL;
+out:
+	mutex_unlock(&vin->group->lock);
+
+	kref_put(&vin->group->refcount, rvin_group_release);
+}
+
 /* -----------------------------------------------------------------------------
  * Async notifier
  */
@@ -249,12 +411,18 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
 
 static int rvin_mc_init(struct rvin_dev *vin)
 {
+	int ret;
+
 	/* All our sources are CSI-2 */
 	vin->mbus_cfg.type = V4L2_MBUS_CSI2;
 	vin->mbus_cfg.flags = 0;
 
 	vin->pad.flags = MEDIA_PAD_FL_SINK;
-	return media_entity_pads_init(&vin->vdev.entity, 1, &vin->pad);
+	ret = media_entity_pads_init(&vin->vdev.entity, 1, &vin->pad);
+	if (ret)
+		return ret;
+
+	return rvin_group_get(vin);
 }
 
 /* -----------------------------------------------------------------------------
@@ -374,7 +542,9 @@ static int rcar_vin_remove(struct platform_device *pdev)
 	v4l2_async_notifier_unregister(&vin->notifier);
 	v4l2_async_notifier_cleanup(&vin->notifier);
 
-	if (!vin->info->use_mc)
+	if (vin->info->use_mc)
+		rvin_group_put(vin);
+	else
 		v4l2_ctrl_handler_free(&vin->ctrl_handler);
 
 	rvin_dma_unregister(vin);
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 5102ad254bff515b..cf5c467d45e10847 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -17,6 +17,8 @@
 #ifndef __RCAR_VIN__
 #define __RCAR_VIN__
 
+#include <linux/kref.h>
+
 #include <media/v4l2-async.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-dev.h>
@@ -29,6 +31,11 @@
 /* Address alignment mask for HW buffers */
 #define HW_BUFFER_MASK 0x7f
 
+/* Max number on VIN instances that can be in a system */
+#define RCAR_VIN_NUM 8
+
+struct rvin_group;
+
 enum model_id {
 	RCAR_H1,
 	RCAR_M1,
@@ -99,6 +106,8 @@ struct rvin_info {
  * @notifier:		V4L2 asynchronous subdevs notifier
  * @digital:		entity in the DT for local digital subdevice
  *
+ * @group:		Gen3 CSI group
+ * @id:			Gen3 group id for this VIN
  * @pad:		media pad for the video device entity
  *
  * @lock:		protects @queue
@@ -133,6 +142,8 @@ struct rvin_dev {
 	struct v4l2_async_notifier notifier;
 	struct rvin_graph_entity *digital;
 
+	struct rvin_group *group;
+	unsigned int id;
 	struct media_pad pad;
 
 	struct mutex lock;
@@ -164,6 +175,26 @@ struct rvin_dev {
 #define vin_warn(d, fmt, arg...)	dev_warn(d->dev, fmt, ##arg)
 #define vin_err(d, fmt, arg...)		dev_err(d->dev, fmt, ##arg)
 
+/**
+ * struct rvin_group - VIN CSI2 group information
+ * @refcount:		number of VIN instances using the group
+ *
+ * @mdev:		media device which represents the group
+ *
+ * @lock:		protects the count and vin members
+ * @count:		number of enabled VIN instances found in DT
+ * @vin:		VIN instances which are part of the group
+ */
+struct rvin_group {
+	struct kref refcount;
+
+	struct media_device mdev;
+
+	struct mutex lock;
+	unsigned int count;
+	struct rvin_dev *vin[RCAR_VIN_NUM];
+};
+
 int rvin_dma_register(struct rvin_dev *vin, int irq);
 void rvin_dma_unregister(struct rvin_dev *vin);
 
-- 
2.16.2

[PATCH v14 26/33] rcar-vin: change name of video device

[Niklas Söderlund]

The rcar-vin driver needs to be part of a media controller to support
Gen3. Give each VIN instance a unique name so it can be referenced from
userspace.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-v4l2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
index 2c28daf1c725e64c..09d584d8e839b868 100644
--- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
+++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
@@ -991,7 +991,7 @@ int rvin_v4l2_register(struct rvin_dev *vin)
 	/* video node */
 	vdev->v4l2_dev = &vin->v4l2_dev;
 	vdev->queue = &vin->queue;
-	strlcpy(vdev->name, KBUILD_MODNAME, sizeof(vdev->name));
+	snprintf(vdev->name, sizeof(vdev->name), "VIN%u output", vin->id);
 	vdev->release = video_device_release_empty;
 	vdev->lock = &vin->lock;
 	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
-- 
2.16.2

[PATCH v14 27/33] rcar-vin: add chsel information to rvin_info

[Niklas Söderlund]

Each Gen3 SoC has a limited set of predefined routing possibilities for
which CSI-2 device and channel can be routed to which VIN instance.
Prepare to store this information in the struct rvin_info.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---

* Changes since v13
- Add review by Laurent.

* Changes since v11
- Fixed spelling.
- Reorderd filed order in struct rvin_group_route.
- Renamed chan to channel in struct rvin_group_route.
---
 drivers/media/platform/rcar-vin/rcar-vin.h | 42 ++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index cf5c467d45e10847..93eb40856b866117 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -43,6 +43,14 @@ enum model_id {
 	RCAR_GEN3,
 };
 
+enum rvin_csi_id {
+	RVIN_CSI20,
+	RVIN_CSI21,
+	RVIN_CSI40,
+	RVIN_CSI41,
+	RVIN_CSI_MAX,
+};
+
 /**
  * STOPPED  - No operation in progress
  * RUNNING  - Operation in progress have buffers
@@ -79,12 +87,45 @@ struct rvin_graph_entity {
 	unsigned int sink_pad;
 };
 
+/**
+ * struct rvin_group_route - describes a route from a channel of a
+ *	CSI-2 receiver to a VIN
+ *
+ * @csi:	CSI-2 receiver ID.
+ * @channel:	Output channel of the CSI-2 receiver.
+ * @vin:	VIN ID.
+ * @mask:	Bitmask of the different CHSEL register values that
+ *		allow for a route from @csi + @chan to @vin.
+ *
+ * .. note::
+ *	Each R-Car CSI-2 receiver has four output channels facing the VIN
+ *	devices, each channel can carry one CSI-2 Virtual Channel (VC).
+ *	There is no correlation between channel number and CSI-2 VC. It's
+ *	up to the CSI-2 receiver driver to configure which VC is output
+ *	on which channel, the VIN devices only care about output channels.
+ *
+ *	There are in some cases multiple CHSEL register settings which would
+ *	allow for the same route from @csi + @channel to @vin. For example
+ *	on R-Car H3 both the CHSEL values 0 and 3 allow for a route from
+ *	CSI40/VC0 to VIN0. All possible CHSEL values for a route need to be
+ *	recorded as a bitmask in @mask, in this example bit 0 and 3 should
+ *	be set.
+ */
+struct rvin_group_route {
+	enum rvin_csi_id csi;
+	unsigned int channel;
+	unsigned int vin;
+	unsigned int mask;
+};
+
 /**
  * struct rvin_info - Information about the particular VIN implementation
  * @model:		VIN model
  * @use_mc:		use media controller instead of controlling subdevice
  * @max_width:		max input width the VIN supports
  * @max_height:		max input height the VIN supports
+ * @routes:		list of possible routes from the CSI-2 recivers to
+ *			all VINs. The list mush be NULL terminated.
  */
 struct rvin_info {
 	enum model_id model;
@@ -92,6 +133,7 @@ struct rvin_info {
 
 	unsigned int max_width;
 	unsigned int max_height;
+	const struct rvin_group_route *routes;
 };
 
 /**
-- 
2.16.2

[PATCH v14 28/33] rcar-vin: parse Gen3 OF and setup media graph

[Niklas Söderlund]

The parsing and registering CSI-2 subdevices with the v4l2 async
framework is a collaborative effort shared between the VIN instances
which are part of the group. When the last VIN in the group is probed it
asks all other VINs to parse its share of OF and record the async
subdevices it finds in the notifier belonging to the last probed VIN.

Once all CSI-2 subdevices in this notifier are bound proceed to register
all VIN video devices of the group and crate media device links between
all CSI-2 and VIN entities according to the SoC specific routing
configuration.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 246 +++++++++++++++++++++++++++-
 drivers/media/platform/rcar-vin/rcar-vin.h  |  12 +-
 2 files changed, 254 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 38eaa246e4c0a7b5..99f6301a778046df 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -27,6 +27,23 @@
 
 #include "rcar-vin.h"
 
+/*
+ * The companion CSI-2 receiver driver (rcar-csi2) is known
+ * and we know it has one source pad (pad 0) and four sink
+ * pads (pad 1-4). So to translate a pad on the remote
+ * CSI-2 receiver to/from the VIN internal channel number simply
+ * subtract/add one from the pad/channel number.
+ */
+#define rvin_group_csi_pad_to_channel(pad) ((pad) - 1)
+#define rvin_group_csi_channel_to_pad(channel) ((channel) + 1)
+
+/*
+ * Not all VINs are created equal, master VINs control the
+ * routing for other VIN's. We can figure out which VIN is
+ * master by looking at a VINs id.
+ */
+#define rvin_group_id_to_master(vin) ((vin) < 4 ? 0 : 4)
+
 /* -----------------------------------------------------------------------------
  * Gen3 CSI2 Group Allocator
  */
@@ -409,6 +426,216 @@ static int rvin_digital_graph_init(struct rvin_dev *vin)
 	return 0;
 }
 
+/* -----------------------------------------------------------------------------
+ * Group async notifier
+ */
+
+static int rvin_group_notify_complete(struct v4l2_async_notifier *notifier)
+{
+	struct rvin_dev *vin = notifier_to_vin(notifier);
+	const struct rvin_group_route *route;
+	unsigned int i;
+	int ret;
+
+	ret = v4l2_device_register_subdev_nodes(&vin->v4l2_dev);
+	if (ret) {
+		vin_err(vin, "Failed to register subdev nodes\n");
+		return ret;
+	}
+
+	/* Register all video nodes for the group. */
+	for (i = 0; i < RCAR_VIN_NUM; i++) {
+		if (vin->group->vin[i]) {
+			ret = rvin_v4l2_register(vin->group->vin[i]);
+			if (ret)
+				return ret;
+		}
+	}
+
+	/* Create all media device links between VINs and CSI-2's. */
+	mutex_lock(&vin->group->lock);
+	for (route = vin->info->routes; route->mask; route++) {
+		struct media_pad *source_pad, *sink_pad;
+		struct media_entity *source, *sink;
+		unsigned int source_idx;
+
+		/* Check that VIN is part of the group. */
+		if (!vin->group->vin[route->vin])
+			continue;
+
+		/* Check that VIN' master is part of the group. */
+		if (!vin->group->vin[rvin_group_id_to_master(route->vin)])
+			continue;
+
+		/* Check that CSI-2 is part of the group. */
+		if (!vin->group->csi[route->csi].subdev)
+			continue;
+
+		source = &vin->group->csi[route->csi].subdev->entity;
+		source_idx = rvin_group_csi_channel_to_pad(route->channel);
+		source_pad = &source->pads[source_idx];
+
+		sink = &vin->group->vin[route->vin]->vdev.entity;
+		sink_pad = &sink->pads[0];
+
+		/* Skip if link already exists. */
+		if (media_entity_find_link(source_pad, sink_pad))
+			continue;
+
+		ret = media_create_pad_link(source, source_idx, sink, 0, 0);
+		if (ret) {
+			vin_err(vin, "Error adding link from %s to %s\n",
+				source->name, sink->name);
+			break;
+		}
+	}
+	mutex_unlock(&vin->group->lock);
+
+	return ret;
+}
+
+static void rvin_group_notify_unbind(struct v4l2_async_notifier *notifier,
+				     struct v4l2_subdev *subdev,
+				     struct v4l2_async_subdev *asd)
+{
+	struct rvin_dev *vin = notifier_to_vin(notifier);
+	unsigned int i;
+
+	for (i = 0; i < RCAR_VIN_NUM; i++)
+		if (vin->group->vin[i])
+			rvin_v4l2_unregister(vin->group->vin[i]);
+
+	mutex_lock(&vin->group->lock);
+
+	for (i = 0; i < RVIN_CSI_MAX; i++) {
+		if (vin->group->csi[i].fwnode != asd->match.fwnode)
+			continue;
+		vin->group->csi[i].subdev = NULL;
+		vin_dbg(vin, "Unbind CSI-2 %s from slot %u\n", subdev->name, i);
+		break;
+	}
+
+	mutex_unlock(&vin->group->lock);
+}
+
+static int rvin_group_notify_bound(struct v4l2_async_notifier *notifier,
+				   struct v4l2_subdev *subdev,
+				   struct v4l2_async_subdev *asd)
+{
+	struct rvin_dev *vin = notifier_to_vin(notifier);
+	unsigned int i;
+
+	mutex_lock(&vin->group->lock);
+
+	for (i = 0; i < RVIN_CSI_MAX; i++) {
+		if (vin->group->csi[i].fwnode != asd->match.fwnode)
+			continue;
+		vin->group->csi[i].subdev = subdev;
+		vin_dbg(vin, "Bound CSI-2 %s to slot %u\n", subdev->name, i);
+		break;
+	}
+
+	mutex_unlock(&vin->group->lock);
+
+	return 0;
+}
+
+static const struct v4l2_async_notifier_operations rvin_group_notify_ops = {
+	.bound = rvin_group_notify_bound,
+	.unbind = rvin_group_notify_unbind,
+	.complete = rvin_group_notify_complete,
+};
+
+static int rvin_mc_parse_of_endpoint(struct device *dev,
+				     struct v4l2_fwnode_endpoint *vep,
+				     struct v4l2_async_subdev *asd)
+{
+	struct rvin_dev *vin = dev_get_drvdata(dev);
+
+	if (vep->base.port != 1 || vep->base.id >= RVIN_CSI_MAX)
+		return -EINVAL;
+
+	if (!of_device_is_available(to_of_node(asd->match.fwnode))) {
+
+		vin_dbg(vin, "OF device %pOF disabled, ignoring\n",
+			to_of_node(asd->match.fwnode));
+		return -ENOTCONN;
+
+	}
+
+	if (vin->group->csi[vep->base.id].fwnode) {
+		vin_dbg(vin, "OF device %pOF already handled\n",
+			to_of_node(asd->match.fwnode));
+		return -ENOTCONN;
+	}
+
+	vin->group->csi[vep->base.id].fwnode = asd->match.fwnode;
+
+	vin_dbg(vin, "Add group OF device %pOF to slot %u\n",
+		to_of_node(asd->match.fwnode), vep->base.id);
+
+	return 0;
+}
+
+static int rvin_mc_parse_of_graph(struct rvin_dev *vin)
+{
+	unsigned int count = 0;
+	unsigned int i;
+	int ret;
+
+	mutex_lock(&vin->group->lock);
+
+	/* If there already is a notifier something has gone wrong, bail out. */
+	if (WARN_ON(vin->group->notifier)) {
+		mutex_unlock(&vin->group->lock);
+		return -EINVAL;
+	}
+
+	/* If not all VIN's are registered don't register the notifier. */
+	for (i = 0; i < RCAR_VIN_NUM; i++)
+		if (vin->group->vin[i])
+			count++;
+
+	if (vin->group->count != count) {
+		mutex_unlock(&vin->group->lock);
+		return 0;
+	}
+
+	/*
+	 * Have all VIN's look for subdevices. Some subdevices will overlap
+	 * but the parser function can handle it, so each subdevice will
+	 * only be registered once with the notifier.
+	 */
+
+	vin->group->notifier = &vin->notifier;
+
+	for (i = 0; i < RCAR_VIN_NUM; i++) {
+		if (!vin->group->vin[i])
+			continue;
+
+		ret = v4l2_async_notifier_parse_fwnode_endpoints_by_port(
+				vin->group->vin[i]->dev, vin->group->notifier,
+				sizeof(struct v4l2_async_subdev), 1,
+				rvin_mc_parse_of_endpoint);
+		if (ret) {
+			mutex_unlock(&vin->group->lock);
+			return ret;
+		}
+	}
+
+	mutex_unlock(&vin->group->lock);
+
+	vin->group->notifier->ops = &rvin_group_notify_ops;
+
+	ret = v4l2_async_notifier_register(&vin->v4l2_dev, &vin->notifier);
+	if (ret < 0) {
+		vin_err(vin, "Notifier registration failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int rvin_mc_init(struct rvin_dev *vin)
 {
 	int ret;
@@ -422,7 +649,15 @@ static int rvin_mc_init(struct rvin_dev *vin)
 	if (ret)
 		return ret;
 
-	return rvin_group_get(vin);
+	ret = rvin_group_get(vin);
+	if (ret)
+		return ret;
+
+	ret = rvin_mc_parse_of_graph(vin);
+	if (ret)
+		rvin_group_put(vin);
+
+	return ret;
 }
 
 /* -----------------------------------------------------------------------------
@@ -542,10 +777,15 @@ static int rcar_vin_remove(struct platform_device *pdev)
 	v4l2_async_notifier_unregister(&vin->notifier);
 	v4l2_async_notifier_cleanup(&vin->notifier);
 
-	if (vin->info->use_mc)
+	if (vin->info->use_mc) {
+		mutex_lock(&vin->group->lock);
+		if (vin->group->notifier == &vin->notifier)
+			vin->group->notifier = NULL;
+		mutex_unlock(&vin->group->lock);
 		rvin_group_put(vin);
-	else
+	} else {
 		v4l2_ctrl_handler_free(&vin->ctrl_handler);
+	}
 
 	rvin_dma_unregister(vin);
 
diff --git a/drivers/media/platform/rcar-vin/rcar-vin.h b/drivers/media/platform/rcar-vin/rcar-vin.h
index 93eb40856b866117..c2aef789b491ab31 100644
--- a/drivers/media/platform/rcar-vin/rcar-vin.h
+++ b/drivers/media/platform/rcar-vin/rcar-vin.h
@@ -223,9 +223,13 @@ struct rvin_dev {
  *
  * @mdev:		media device which represents the group
  *
- * @lock:		protects the count and vin members
+ * @lock:		protects the count, notifier, vin and csi members
  * @count:		number of enabled VIN instances found in DT
+ * @notifier:		pointer to the notifier of a VIN which handles the
+ *			groups async sub-devices.
  * @vin:		VIN instances which are part of the group
+ * @csi:		array of pairs of fwnode and subdev pointers
+ *			to all CSI-2 subdevices.
  */
 struct rvin_group {
 	struct kref refcount;
@@ -234,7 +238,13 @@ struct rvin_group {
 
 	struct mutex lock;
 	unsigned int count;
+	struct v4l2_async_notifier *notifier;
 	struct rvin_dev *vin[RCAR_VIN_NUM];
+
+	struct {
+		struct fwnode_handle *fwnode;
+		struct v4l2_subdev *subdev;
+	} csi[RVIN_CSI_MAX];
 };
 
 int rvin_dma_register(struct rvin_dev *vin, int irq);
-- 
2.16.2

[PATCH v14 29/33] rcar-vin: add link notify for Gen3

[Niklas Söderlund]

Add the ability to process media device link change requests. Link
enabling is a bit complicated on Gen3, whether or not it's possible to
enable a link depends on what other links already are enabled. On Gen3
the 8 VINs are split into two subgroup's (VIN0-3 and VIN4-7) and from a
routing perspective these two groups are independent of each other.
Each subgroup's routing is controlled by the subgroup VIN master
instance (VIN0 and VIN4).

There are a limited number of possible route setups available for each
subgroup and the configuration of each setup is dictated by the
hardware. On H3 for example there are 6 possible route setups for each
subgroup to choose from.

This leads to the media device link notification code being rather large
since it will find the best routing configuration to try and accommodate
as many links as possible. When it's not possible to enable a new link
due to hardware constrains the link_notifier callback will return
-EMLINK.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

---

* Changes since v12
- Add review tag from Laurent.

* Changes since v11
- Fixed spelling
- Updated comment to clarify the intent that no link can be enabled if
any video node is open.
- Use container_of() instead of a loop to find struct vin_dev from the
video device.
---
 drivers/media/platform/rcar-vin/rcar-core.c | 147 ++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 99f6301a778046df..0cc76d73115e9277 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -24,6 +24,7 @@
 
 #include <media/v4l2-async.h>
 #include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
 
 #include "rcar-vin.h"
 
@@ -44,6 +45,151 @@
  */
 #define rvin_group_id_to_master(vin) ((vin) < 4 ? 0 : 4)
 
+/* -----------------------------------------------------------------------------
+ * Media Controller link notification
+ */
+
+/* group lock should be held when calling this function. */
+static int rvin_group_entity_to_csi_id(struct rvin_group *group,
+				       struct media_entity *entity)
+{
+	struct v4l2_subdev *sd;
+	unsigned int i;
+
+	sd = media_entity_to_v4l2_subdev(entity);
+
+	for (i = 0; i < RVIN_CSI_MAX; i++)
+		if (group->csi[i].subdev == sd)
+			return i;
+
+	return -ENODEV;
+}
+
+static unsigned int rvin_group_get_mask(struct rvin_dev *vin,
+					enum rvin_csi_id csi_id,
+					unsigned char channel)
+{
+	const struct rvin_group_route *route;
+	unsigned int mask = 0;
+
+	for (route = vin->info->routes; route->mask; route++) {
+		if (route->vin == vin->id &&
+		    route->csi == csi_id &&
+		    route->channel == channel) {
+			vin_dbg(vin,
+				"Adding route: vin: %d csi: %d channel: %d\n",
+				route->vin, route->csi, route->channel);
+			mask |= route->mask;
+		}
+	}
+
+	return mask;
+}
+
+/*
+ * Link setup for the links between a VIN and a CSI-2 receiver is a bit
+ * complex. The reason for this is that the register controlling routing
+ * is not present in each VIN instance. There are special VINs which
+ * control routing for themselves and other VINs. There are not many
+ * different possible links combinations that can be enabled at the same
+ * time, therefor all already enabled links which are controlled by a
+ * master VIN need to be taken into account when making the decision
+ * if a new link can be enabled or not.
+ *
+ * 1. Find out which VIN the link the user tries to enable is connected to.
+ * 2. Lookup which master VIN controls the links for this VIN.
+ * 3. Start with a bitmask with all bits set.
+ * 4. For each previously enabled link from the master VIN bitwise AND its
+ *    route mask (see documentation for mask in struct rvin_group_route)
+ *    with the bitmask.
+ * 5. Bitwise AND the mask for the link the user tries to enable to the bitmask.
+ * 6. If the bitmask is not empty at this point the new link can be enabled
+ *    while keeping all previous links enabled. Update the CHSEL value of the
+ *    master VIN and inform the user that the link could be enabled.
+ *
+ * Please note that no link can be enabled if any VIN in the group is
+ * currently open.
+ */
+static int rvin_group_link_notify(struct media_link *link, u32 flags,
+				  unsigned int notification)
+{
+	struct rvin_group *group = container_of(link->graph_obj.mdev,
+						struct rvin_group, mdev);
+	unsigned int master_id, channel, mask_new, i;
+	unsigned int mask = ~0;
+	struct media_entity *entity;
+	struct video_device *vdev;
+	struct media_pad *csi_pad;
+	struct rvin_dev *vin = NULL;
+	int csi_id, ret;
+
+	ret = v4l2_pipeline_link_notify(link, flags, notification);
+	if (ret)
+		return ret;
+
+	/* Only care about link enablement for VIN nodes. */
+	if (!(flags & MEDIA_LNK_FL_ENABLED) ||
+	    !is_media_entity_v4l2_video_device(link->sink->entity))
+		return 0;
+
+	/* If any entity is in use don't allow link changes. */
+	media_device_for_each_entity(entity, &group->mdev)
+		if (entity->use_count)
+			return -EBUSY;
+
+	mutex_lock(&group->lock);
+
+	/* Find the master VIN that controls the routes. */
+	vdev = media_entity_to_video_device(link->sink->entity);
+	vin = container_of(vdev, struct rvin_dev, vdev);
+	master_id = rvin_group_id_to_master(vin->id);
+
+	if (WARN_ON(!group->vin[master_id])) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* Build a mask for already enabled links. */
+	for (i = master_id; i < master_id + 4; i++) {
+		if (!group->vin[i])
+			continue;
+
+		/* Get remote CSI-2, if any. */
+		csi_pad = media_entity_remote_pad(
+				&group->vin[i]->vdev.entity.pads[0]);
+		if (!csi_pad)
+			continue;
+
+		csi_id = rvin_group_entity_to_csi_id(group, csi_pad->entity);
+		channel = rvin_group_csi_pad_to_channel(csi_pad->index);
+
+		mask &= rvin_group_get_mask(group->vin[i], csi_id, channel);
+	}
+
+	/* Add the new link to the existing mask and check if it works. */
+	csi_id = rvin_group_entity_to_csi_id(group, link->source->entity);
+	channel = rvin_group_csi_pad_to_channel(link->source->index);
+	mask_new = mask & rvin_group_get_mask(vin, csi_id, channel);
+
+	vin_dbg(vin, "Try link change mask: 0x%x new: 0x%x\n", mask, mask_new);
+
+	if (!mask_new) {
+		ret = -EMLINK;
+		goto out;
+	}
+
+	/* New valid CHSEL found, set the new value. */
+	ret = rvin_set_channel_routing(group->vin[master_id], __ffs(mask_new));
+out:
+	mutex_unlock(&group->lock);
+
+	return ret;
+}
+
+static const struct media_device_ops rvin_media_ops = {
+	.link_notify = rvin_group_link_notify,
+};
+
 /* -----------------------------------------------------------------------------
  * Gen3 CSI2 Group Allocator
  */
@@ -85,6 +231,7 @@ static int rvin_group_init(struct rvin_group *group, struct rvin_dev *vin)
 	vin_dbg(vin, "found %u enabled VIN's in DT", group->count);
 
 	mdev->dev = vin->dev;
+	mdev->ops = &rvin_media_ops;
 
 	match = of_match_node(vin->dev->driver->of_match_table,
 			      vin->dev->of_node);
-- 
2.16.2

[PATCH v14 30/33] rcar-vin: extend {start,stop}_streaming to work with media controller

[Niklas Söderlund]

The procedure to start or stop streaming using the non-MC single
subdevice and the MC graph and multiple subdevices are quite different.
Create a new function to abstract which method is used based on which
mode the driver is running in and add logic to start the MC graph.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>

---

* Changes since v12
- Rebase to latest media-tree/master changed a 'return ret' to a 'goto
  out' in rvin_start_streaming().
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 135 +++++++++++++++++++++++++++--
 1 file changed, 127 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index d70a689d9dd3713f..4a3a195e7f59047c 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -996,10 +996,126 @@ static void rvin_buffer_queue(struct vb2_buffer *vb)
 	spin_unlock_irqrestore(&vin->qlock, flags);
 }
 
+static int rvin_mc_validate_format(struct rvin_dev *vin, struct v4l2_subdev *sd,
+				   struct media_pad *pad)
+{
+	struct v4l2_subdev_format fmt = {
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
+
+	fmt.pad = pad->index;
+	if (v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt))
+		return -EPIPE;
+
+	switch (fmt.format.code) {
+	case MEDIA_BUS_FMT_YUYV8_1X16:
+	case MEDIA_BUS_FMT_UYVY8_2X8:
+	case MEDIA_BUS_FMT_UYVY10_2X10:
+	case MEDIA_BUS_FMT_RGB888_1X24:
+		vin->mbus_code = fmt.format.code;
+		break;
+	default:
+		return -EPIPE;
+	}
+
+	switch (fmt.format.field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+	case V4L2_FIELD_NONE:
+	case V4L2_FIELD_INTERLACED_TB:
+	case V4L2_FIELD_INTERLACED_BT:
+	case V4L2_FIELD_INTERLACED:
+	case V4L2_FIELD_SEQ_TB:
+	case V4L2_FIELD_SEQ_BT:
+		/* Supported natively */
+		break;
+	case V4L2_FIELD_ALTERNATE:
+		switch (vin->format.field) {
+		case V4L2_FIELD_TOP:
+		case V4L2_FIELD_BOTTOM:
+		case V4L2_FIELD_NONE:
+			break;
+		case V4L2_FIELD_INTERLACED_TB:
+		case V4L2_FIELD_INTERLACED_BT:
+		case V4L2_FIELD_INTERLACED:
+		case V4L2_FIELD_SEQ_TB:
+		case V4L2_FIELD_SEQ_BT:
+			/* Use VIN hardware to combine the two fields */
+			fmt.format.height *= 2;
+			break;
+		default:
+			return -EPIPE;
+		}
+		break;
+	default:
+		return -EPIPE;
+	}
+
+	if (fmt.format.width != vin->format.width ||
+	    fmt.format.height != vin->format.height ||
+	    fmt.format.code != vin->mbus_code)
+		return -EPIPE;
+
+	return 0;
+}
+
+static int rvin_set_stream(struct rvin_dev *vin, int on)
+{
+	struct media_pipeline *pipe;
+	struct media_device *mdev;
+	struct v4l2_subdev *sd;
+	struct media_pad *pad;
+	int ret;
+
+	/* No media controller used, simply pass operation to subdevice. */
+	if (!vin->info->use_mc) {
+		ret = v4l2_subdev_call(vin->digital->subdev, video, s_stream,
+				       on);
+
+		return ret == -ENOIOCTLCMD ? 0 : ret;
+	}
+
+	pad = media_entity_remote_pad(&vin->pad);
+	if (!pad)
+		return -EPIPE;
+
+	sd = media_entity_to_v4l2_subdev(pad->entity);
+
+	if (!on) {
+		media_pipeline_stop(&vin->vdev.entity);
+		return v4l2_subdev_call(sd, video, s_stream, 0);
+	}
+
+	ret = rvin_mc_validate_format(vin, sd, pad);
+	if (ret)
+		return ret;
+
+	/*
+	 * The graph lock needs to be taken to protect concurrent
+	 * starts of multiple VIN instances as they might share
+	 * a common subdevice down the line and then should use
+	 * the same pipe.
+	 */
+	mdev = vin->vdev.entity.graph_obj.mdev;
+	mutex_lock(&mdev->graph_mutex);
+	pipe = sd->entity.pipe ? sd->entity.pipe : &vin->vdev.pipe;
+	ret = __media_pipeline_start(&vin->vdev.entity, pipe);
+	mutex_unlock(&mdev->graph_mutex);
+	if (ret)
+		return ret;
+
+	ret = v4l2_subdev_call(sd, video, s_stream, 1);
+	if (ret == -ENOIOCTLCMD)
+		ret = 0;
+	if (ret)
+		media_pipeline_stop(&vin->vdev.entity);
+
+	return ret;
+}
+
 static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
 {
 	struct rvin_dev *vin = vb2_get_drv_priv(vq);
-	struct v4l2_subdev *sd;
 	unsigned long flags;
 	int ret;
 
@@ -1014,8 +1130,13 @@ static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
 		return -ENOMEM;
 	}
 
-	sd = vin_to_source(vin);
-	v4l2_subdev_call(sd, video, s_stream, 1);
+	ret = rvin_set_stream(vin, 1);
+	if (ret) {
+		spin_lock_irqsave(&vin->qlock, flags);
+		return_all_buffers(vin, VB2_BUF_STATE_QUEUED);
+		spin_unlock_irqrestore(&vin->qlock, flags);
+		goto out;
+	}
 
 	spin_lock_irqsave(&vin->qlock, flags);
 
@@ -1024,11 +1145,11 @@ static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
 	ret = rvin_capture_start(vin);
 	if (ret) {
 		return_all_buffers(vin, VB2_BUF_STATE_QUEUED);
-		v4l2_subdev_call(sd, video, s_stream, 0);
+		rvin_set_stream(vin, 0);
 	}
 
 	spin_unlock_irqrestore(&vin->qlock, flags);
-
+out:
 	if (ret)
 		dma_free_coherent(vin->dev, vin->format.sizeimage, vin->scratch,
 				  vin->scratch_phys);
@@ -1039,7 +1160,6 @@ static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
 static void rvin_stop_streaming(struct vb2_queue *vq)
 {
 	struct rvin_dev *vin = vb2_get_drv_priv(vq);
-	struct v4l2_subdev *sd;
 	unsigned long flags;
 	int retries = 0;
 
@@ -1078,8 +1198,7 @@ static void rvin_stop_streaming(struct vb2_queue *vq)
 
 	spin_unlock_irqrestore(&vin->qlock, flags);
 
-	sd = vin_to_source(vin);
-	v4l2_subdev_call(sd, video, s_stream, 0);
+	rvin_set_stream(vin, 0);
 
 	/* disable interrupts */
 	rvin_disable_interrupts(vin);
-- 
2.16.2

[PATCH v14 31/33] rcar-vin: enable support for r8a7795

[Niklas Söderlund]

Add the SoC specific information for Renesas r8a7795 ES1.x and ES2.0.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/Kconfig     |   2 +-
 drivers/media/platform/rcar-vin/rcar-core.c | 120 ++++++++++++++++++++++++++++
 2 files changed, 121 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/rcar-vin/Kconfig b/drivers/media/platform/rcar-vin/Kconfig
index af4c98b44d2e22cb..8fa7ee468c63afb9 100644
--- a/drivers/media/platform/rcar-vin/Kconfig
+++ b/drivers/media/platform/rcar-vin/Kconfig
@@ -6,7 +6,7 @@ config VIDEO_RCAR_VIN
 	select V4L2_FWNODE
 	---help---
 	  Support for Renesas R-Car Video Input (VIN) driver.
-	  Supports R-Car Gen2 SoCs.
+	  Supports R-Car Gen2 and Gen3 SoCs.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called rcar-vin.
diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 0cc76d73115e9277..81119ae4402d0990 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <media/v4l2-async.h>
 #include <media/v4l2-fwnode.h>
@@ -832,6 +833,104 @@ static const struct rvin_info rcar_info_gen2 = {
 	.max_height = 2048,
 };
 
+static const struct rvin_group_route rcar_info_r8a7795_routes[] = {
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 0, .mask = BIT(0) | BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 0, .mask = BIT(1) | BIT(4) },
+	{ .csi = RVIN_CSI40, .channel = 1, .vin = 0, .mask = BIT(2) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 1, .mask = BIT(0) },
+	{ .csi = RVIN_CSI40, .channel = 1, .vin = 1, .mask = BIT(1) | BIT(3) },
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 1, .mask = BIT(2) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 1, .mask = BIT(4) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 2, .mask = BIT(0) },
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 2, .mask = BIT(1) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 2, .mask = BIT(2) },
+	{ .csi = RVIN_CSI40, .channel = 2, .vin = 2, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 2, .vin = 2, .mask = BIT(4) },
+	{ .csi = RVIN_CSI40, .channel = 1, .vin = 3, .mask = BIT(0) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 3, .mask = BIT(1) | BIT(2) },
+	{ .csi = RVIN_CSI40, .channel = 3, .vin = 3, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 3, .vin = 3, .mask = BIT(4) },
+	{ .csi = RVIN_CSI41, .channel = 0, .vin = 4, .mask = BIT(0) | BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 4, .mask = BIT(1) | BIT(4) },
+	{ .csi = RVIN_CSI41, .channel = 1, .vin = 4, .mask = BIT(2) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 5, .mask = BIT(0) },
+	{ .csi = RVIN_CSI41, .channel = 1, .vin = 5, .mask = BIT(1) | BIT(3) },
+	{ .csi = RVIN_CSI41, .channel = 0, .vin = 5, .mask = BIT(2) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 5, .mask = BIT(4) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 6, .mask = BIT(0) },
+	{ .csi = RVIN_CSI41, .channel = 0, .vin = 6, .mask = BIT(1) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 6, .mask = BIT(2) },
+	{ .csi = RVIN_CSI41, .channel = 2, .vin = 6, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 2, .vin = 6, .mask = BIT(4) },
+	{ .csi = RVIN_CSI41, .channel = 1, .vin = 7, .mask = BIT(0) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 7, .mask = BIT(1) | BIT(2) },
+	{ .csi = RVIN_CSI41, .channel = 3, .vin = 7, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 3, .vin = 7, .mask = BIT(4) },
+	{ /* Sentinel */ }
+};
+
+static const struct rvin_info rcar_info_r8a7795 = {
+	.model = RCAR_GEN3,
+	.use_mc = true,
+	.max_width = 4096,
+	.max_height = 4096,
+	.routes = rcar_info_r8a7795_routes,
+};
+
+static const struct rvin_group_route rcar_info_r8a7795es1_routes[] = {
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 0, .mask = BIT(0) | BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 0, .mask = BIT(1) | BIT(4) },
+	{ .csi = RVIN_CSI21, .channel = 0, .vin = 0, .mask = BIT(2) | BIT(5) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 1, .mask = BIT(0) },
+	{ .csi = RVIN_CSI21, .channel = 0, .vin = 1, .mask = BIT(1) },
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 1, .mask = BIT(2) },
+	{ .csi = RVIN_CSI40, .channel = 1, .vin = 1, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 1, .mask = BIT(4) },
+	{ .csi = RVIN_CSI21, .channel = 1, .vin = 1, .mask = BIT(5) },
+	{ .csi = RVIN_CSI21, .channel = 0, .vin = 2, .mask = BIT(0) },
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 2, .mask = BIT(1) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 2, .mask = BIT(2) },
+	{ .csi = RVIN_CSI40, .channel = 2, .vin = 2, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 2, .vin = 2, .mask = BIT(4) },
+	{ .csi = RVIN_CSI21, .channel = 2, .vin = 2, .mask = BIT(5) },
+	{ .csi = RVIN_CSI40, .channel = 1, .vin = 3, .mask = BIT(0) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 3, .mask = BIT(1) },
+	{ .csi = RVIN_CSI21, .channel = 1, .vin = 3, .mask = BIT(2) },
+	{ .csi = RVIN_CSI40, .channel = 3, .vin = 3, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 3, .vin = 3, .mask = BIT(4) },
+	{ .csi = RVIN_CSI21, .channel = 3, .vin = 3, .mask = BIT(5) },
+	{ .csi = RVIN_CSI41, .channel = 0, .vin = 4, .mask = BIT(0) | BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 4, .mask = BIT(1) | BIT(4) },
+	{ .csi = RVIN_CSI21, .channel = 0, .vin = 4, .mask = BIT(2) | BIT(5) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 5, .mask = BIT(0) },
+	{ .csi = RVIN_CSI21, .channel = 0, .vin = 5, .mask = BIT(1) },
+	{ .csi = RVIN_CSI41, .channel = 0, .vin = 5, .mask = BIT(2) },
+	{ .csi = RVIN_CSI41, .channel = 1, .vin = 5, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 5, .mask = BIT(4) },
+	{ .csi = RVIN_CSI21, .channel = 1, .vin = 5, .mask = BIT(5) },
+	{ .csi = RVIN_CSI21, .channel = 0, .vin = 6, .mask = BIT(0) },
+	{ .csi = RVIN_CSI41, .channel = 0, .vin = 6, .mask = BIT(1) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 6, .mask = BIT(2) },
+	{ .csi = RVIN_CSI41, .channel = 2, .vin = 6, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 2, .vin = 6, .mask = BIT(4) },
+	{ .csi = RVIN_CSI21, .channel = 2, .vin = 6, .mask = BIT(5) },
+	{ .csi = RVIN_CSI41, .channel = 1, .vin = 7, .mask = BIT(0) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 7, .mask = BIT(1) },
+	{ .csi = RVIN_CSI21, .channel = 1, .vin = 7, .mask = BIT(2) },
+	{ .csi = RVIN_CSI41, .channel = 3, .vin = 7, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 3, .vin = 7, .mask = BIT(4) },
+	{ .csi = RVIN_CSI21, .channel = 3, .vin = 7, .mask = BIT(5) },
+	{ /* Sentinel */ }
+};
+
+static const struct rvin_info rcar_info_r8a7795es1 = {
+	.model = RCAR_GEN3,
+	.use_mc = true,
+	.max_width = 4096,
+	.max_height = 4096,
+	.routes = rcar_info_r8a7795es1_routes,
+};
+
 static const struct of_device_id rvin_of_id_table[] = {
 	{
 		.compatible = "renesas,vin-r8a7778",
@@ -861,12 +960,25 @@ static const struct of_device_id rvin_of_id_table[] = {
 		.compatible = "renesas,rcar-gen2-vin",
 		.data = &rcar_info_gen2,
 	},
+	{
+		.compatible = "renesas,vin-r8a7795",
+		.data = &rcar_info_r8a7795,
+	},
 	{ /* Sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, rvin_of_id_table);
 
+static const struct soc_device_attribute r8a7795es1[] = {
+	{
+		.soc_id = "r8a7795", .revision = "ES1.*",
+		.data = &rcar_info_r8a7795es1,
+	},
+	{ /* Sentinel */ }
+};
+
 static int rcar_vin_probe(struct platform_device *pdev)
 {
+	const struct soc_device_attribute *attr;
 	struct rvin_dev *vin;
 	struct resource *mem;
 	int irq, ret;
@@ -878,6 +990,14 @@ static int rcar_vin_probe(struct platform_device *pdev)
 	vin->dev = &pdev->dev;
 	vin->info = of_device_get_match_data(&pdev->dev);
 
+	/*
+	 * Special care is needed on r8a7795 ES1.x since it
+	 * uses different routing than r8a7795 ES2.0.
+	 */
+	attr = soc_device_match(r8a7795es1);
+	if (attr)
+		vin->info = attr->data;
+
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (mem == NULL)
 		return -EINVAL;
-- 
2.16.2

[PATCH v14 32/33] rcar-vin: enable support for r8a7796

[Niklas Söderlund]

Add the SoC specific information for Renesas r8a7796.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 44 +++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 81119ae4402d0990..81c82793b1312aae 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -931,6 +931,46 @@ static const struct rvin_info rcar_info_r8a7795es1 = {
 	.routes = rcar_info_r8a7795es1_routes,
 };
 
+static const struct rvin_group_route rcar_info_r8a7796_routes[] = {
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 0, .mask = BIT(0) | BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 0, .mask = BIT(1) | BIT(4) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 1, .mask = BIT(0) },
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 1, .mask = BIT(2) },
+	{ .csi = RVIN_CSI40, .channel = 1, .vin = 1, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 1, .mask = BIT(4) },
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 2, .mask = BIT(1) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 2, .mask = BIT(2) },
+	{ .csi = RVIN_CSI40, .channel = 2, .vin = 2, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 2, .vin = 2, .mask = BIT(4) },
+	{ .csi = RVIN_CSI40, .channel = 1, .vin = 3, .mask = BIT(0) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 3, .mask = BIT(1) },
+	{ .csi = RVIN_CSI40, .channel = 3, .vin = 3, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 3, .vin = 3, .mask = BIT(4) },
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 4, .mask = BIT(0) | BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 4, .mask = BIT(1) | BIT(4) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 5, .mask = BIT(0) },
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 5, .mask = BIT(2) },
+	{ .csi = RVIN_CSI40, .channel = 1, .vin = 5, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 5, .mask = BIT(4) },
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 6, .mask = BIT(1) },
+	{ .csi = RVIN_CSI20, .channel = 0, .vin = 6, .mask = BIT(2) },
+	{ .csi = RVIN_CSI40, .channel = 2, .vin = 6, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 2, .vin = 6, .mask = BIT(4) },
+	{ .csi = RVIN_CSI40, .channel = 1, .vin = 7, .mask = BIT(0) },
+	{ .csi = RVIN_CSI20, .channel = 1, .vin = 7, .mask = BIT(1) },
+	{ .csi = RVIN_CSI40, .channel = 3, .vin = 7, .mask = BIT(3) },
+	{ .csi = RVIN_CSI20, .channel = 3, .vin = 7, .mask = BIT(4) },
+	{ /* Sentinel */ }
+};
+
+static const struct rvin_info rcar_info_r8a7796 = {
+	.model = RCAR_GEN3,
+	.use_mc = true,
+	.max_width = 4096,
+	.max_height = 4096,
+	.routes = rcar_info_r8a7796_routes,
+};
+
 static const struct of_device_id rvin_of_id_table[] = {
 	{
 		.compatible = "renesas,vin-r8a7778",
@@ -964,6 +1004,10 @@ static const struct of_device_id rvin_of_id_table[] = {
 		.compatible = "renesas,vin-r8a7795",
 		.data = &rcar_info_r8a7795,
 	},
+	{
+		.compatible = "renesas,vin-r8a7796",
+		.data = &rcar_info_r8a7796,
+	},
 	{ /* Sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, rvin_of_id_table);
-- 
2.16.2

[PATCH v14 33/33] rcar-vin: enable support for r8a77970

[Niklas Söderlund]

Add the SoC specific information for Renesas r8a77970.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
---
 drivers/media/platform/rcar-vin/rcar-core.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/media/platform/rcar-vin/rcar-core.c b/drivers/media/platform/rcar-vin/rcar-core.c
index 81c82793b1312aae..55b745ac86a5884d 100644
--- a/drivers/media/platform/rcar-vin/rcar-core.c
+++ b/drivers/media/platform/rcar-vin/rcar-core.c
@@ -971,6 +971,25 @@ static const struct rvin_info rcar_info_r8a7796 = {
 	.routes = rcar_info_r8a7796_routes,
 };
 
+static const struct rvin_group_route _rcar_info_r8a77970_routes[] = {
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 0, .mask = BIT(0) | BIT(3) },
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 1, .mask = BIT(2) },
+	{ .csi = RVIN_CSI40, .channel = 1, .vin = 1, .mask = BIT(3) },
+	{ .csi = RVIN_CSI40, .channel = 0, .vin = 2, .mask = BIT(1) },
+	{ .csi = RVIN_CSI40, .channel = 2, .vin = 2, .mask = BIT(3) },
+	{ .csi = RVIN_CSI40, .channel = 1, .vin = 3, .mask = BIT(0) },
+	{ .csi = RVIN_CSI40, .channel = 3, .vin = 3, .mask = BIT(3) },
+	{ /* Sentinel */ }
+};
+
+static const struct rvin_info rcar_info_r8a77970 = {
+	.model = RCAR_GEN3,
+	.use_mc = true,
+	.max_width = 4096,
+	.max_height = 4096,
+	.routes = _rcar_info_r8a77970_routes,
+};
+
 static const struct of_device_id rvin_of_id_table[] = {
 	{
 		.compatible = "renesas,vin-r8a7778",
@@ -1008,6 +1027,10 @@ static const struct of_device_id rvin_of_id_table[] = {
 		.compatible = "renesas,vin-r8a7796",
 		.data = &rcar_info_r8a7796,
 	},
+	{
+		.compatible = "renesas,vin-r8a77970",
+		.data = &rcar_info_r8a77970,
+	},
 	{ /* Sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, rvin_of_id_table);
-- 
2.16.2

Re: [PATCH v14 03/33] rcar-vin: add Gen3 devicetree bindings documentation

[Geert Uytterhoeven]

Hi Niklas,

Some comments, triggered by seeing Simon's "[PATCH 00/10]
ARM, arm64: dts: renesas: update register properties"  series.

On Sat, Apr 14, 2018 at 1:56 PM, Niklas Söderlund
<niklas.soderlund+renesas@ragnatech.se> wrote:
> Document the devicetree bindings for the CSI-2 inputs available on Gen3.
>
> There is a need to add a custom property 'renesas,id' and to define
> which CSI-2 input is described in which endpoint under the port@1 node.
> This information is needed since there are a set of predefined routes
> between each VIN and CSI-2 block. This routing table will be kept
> inside the driver but in order for it to act on it it must know which
> VIN and CSI-2 is which.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Acked-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> --- a/Documentation/devicetree/bindings/media/rcar_vin.txt
> +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
> @@ -2,8 +2,12 @@ Renesas R-Car Video Input driver (rcar_vin)
>  -------------------------------------------
>
>  The rcar_vin device provides video input capabilities for the Renesas R-Car
> -family of devices. The current blocks are always slaves and suppot one input
> -channel which can be either RGB, YUYV or BT656.
> +family of devices.
> +
> +Each VIN instance has a single parallel input that supports RGB and YUV video,
> +with both external synchronization and BT.656 synchronization for the latter.
> +Depending on the instance the VIN input is connected to external SoC pins, or
> +on Gen3 platforms to a CSI-2 receiver.
>
>   - compatible: Must be one or more of the following
>     - "renesas,vin-r8a7743" for the R8A7743 device
> @@ -16,6 +20,8 @@ channel which can be either RGB, YUYV or BT656.
>     - "renesas,vin-r8a7793" for the R8A7793 device
>     - "renesas,vin-r8a7794" for the R8A7794 device
>     - "renesas,vin-r8a7795" for the R8A7795 device
> +   - "renesas,vin-r8a7796" for the R8A7796 device
> +   - "renesas,vin-r8a77970" for the R8A77970 device
>     - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible
>       device.
>     - "renesas,rcar-gen3-vin" for a generic R-Car Gen3 compatible device.
> @@ -31,21 +37,38 @@ channel which can be either RGB, YUYV or BT656.
>  Additionally, an alias named vinX will need to be created to specify
>  which video input device this is.
>
> -The per-board settings:
> +The per-board settings Gen2 platforms:
>   - port sub-node describing a single endpoint connected to the vin
>     as described in video-interfaces.txt[1]. Only the first one will
>     be considered as each vin interface has one input port.
>
> -   These settings are used to work out video input format and widths
> -   into the system.
> +The per-board settings Gen3 platforms:
>
> +Gen3 platforms can support both a single connected parallel input source
> +from external SoC pins (port0) and/or multiple parallel input sources

port@0?

> +from local SoC CSI-2 receivers (port1) depending on SoC.

port@1?

>
> -Device node example
> --------------------
> +- renesas,id - ID number of the VIN, VINx in the documentation.
> +- ports
> +    - port 0 - sub-node describing a single endpoint connected to the VIN

port@0?

> +      from external SoC pins described in video-interfaces.txt[1].
> +      Describing more then one endpoint in port 0 is invalid. Only VIN

port@0?

> +      instances that are connected to external pins should have port 0.

port@0?

> +    - port 1 - sub-nodes describing one or more endpoints connected to

port@1?

> +      the VIN from local SoC CSI-2 receivers. The endpoint numbers must
> +      use the following schema.
>
> -       aliases {
> -              vin0 = &vin0;
> -       };
> +        - Endpoint 0 - sub-node describing the endpoint connected to CSI20

endpoint@0 (lower case and unit address)?

> +        - Endpoint 1 - sub-node describing the endpoint connected to CSI21

endpoint@1?

> +        - Endpoint 2 - sub-node describing the endpoint connected to CSI40

endpoint@2?

> +        - Endpoint 3 - sub-node describing the endpoint connected to CSI41

endpoint@3?

> +
> +Device node example for Gen2 platforms
> +--------------------------------------
> +
> +        aliases {
> +                vin0 = &vin0;
> +        };
>
>          vin0: vin@e6ef0000 {
>                  compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin";
> @@ -55,8 +78,8 @@ Device node example
>                  status = "disabled";
>          };
>
> -Board setup example (vin1 composite video input)
> -------------------------------------------------
> +Board setup example for Gen2 platforms (vin1 composite video input)
> +-------------------------------------------------------------------
>
>  &i2c2   {
>          status = "okay";
> @@ -95,6 +118,77 @@ Board setup example (vin1 composite video input)
>          };
>  };
>
> +Device node example for Gen3 platforms
> +--------------------------------------
>
> +        vin0: video@e6ef0000 {
> +                compatible = "renesas,vin-r8a7795";
> +                reg = <0 0xe6ef0000 0 0x1000>;
> +                interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&cpg CPG_MOD 811>;
> +                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +                resets = <&cpg 811>;
> +                renesas,id = <0>;
> +
> +                ports {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +
> +                        port@1 {
> +                                #address-cells = <1>;
> +                                #size-cells = <0>;
> +
> +                                reg = <1>;
> +
> +                                vin0csi20: endpoint@0 {
> +                                        reg = <0>;
> +                                        remote-endpoint= <&csi20vin0>;
> +                                };
> +                                vin0csi21: endpoint@1 {
> +                                        reg = <1>;
> +                                        remote-endpoint= <&csi21vin0>;
> +                                };
> +                                vin0csi40: endpoint@2 {
> +                                        reg = <2>;
> +                                        remote-endpoint= <&csi40vin0>;
> +                                };
> +                        };
> +                };
> +        };
> +
> +        csi20: csi2@fea80000 {
> +                compatible = "renesas,r8a7795-csi2";
> +                reg = <0 0xfea80000 0 0x10000>;
> +                interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&cpg CPG_MOD 714>;
> +                power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
> +                resets = <&cpg 714>;
> +
> +                ports {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +
> +                        port@0 {
> +                                reg = <0>;
> +                                csi20_in: endpoint {
> +                                        clock-lanes = <0>;
> +                                        data-lanes = <1>;
> +                                        remote-endpoint = <&adv7482_txb>;
> +                                };
> +                        };
> +
> +                        port@1 {
> +                                #address-cells = <1>;
> +                                #size-cells = <0>;
> +
> +                                reg = <1>;
> +
> +                                csi20vin0: endpoint@0 {
> +                                        reg = <0>;
> +                                        remote-endpoint = <&vin0csi20>;
> +                                };
> +                        };
> +                };
> +        };
>
>  [1] video-interfaces.txt common video media interface

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v14,29/33] rcar-vin: add link notify for Gen3

[Eugeniu Rosca]

Hi Niklas,

jFYI/FWIW, checking the functionality of rcar-vin using the
procedure/commands described in https://elinux.org/R-Car/Tests:rcar-vin
on the recent Linux commit ea2cec24c8d429ee6f99040e4eb6c7ad627fe777, I
consistently reproduce below lockdep splat [2] (full log and .config at
https://gist.github.com/erosca/67a46451b3cb342fa59b558022278fff).

Since the locking primitives of rvin_group_link_notify (popping up in
the log) haven't suffered changes since v4.18-rc1 commit [1], I conclude
this thread [0] might be an appropriate place for reporting the issue.

Best regards,
Eugeniu.

[0] https://patchwork.kernel.org/patch/10341183/ [v14,29/33] rcar-vin: add link notify for Gen3
[1] c0cc5aef31704c ("media: rcar-vin: add link notify for Gen3")
[2] media-ctl -l "'rcar_csi2 feaa0000.csi2':1 -> 'VIN0 output':0 [1]"

======================================================
WARNING: possible circular locking dependency detected
5.1.0-rc3+ #27 Tainted: G        W        
------------------------------------------------------
media-ctl/2407 is trying to acquire lock:
00000000be992082 (&group->lock){+.+.}, at: rvin_group_link_notify+0xc4/0x4f4

but task is already holding lock:
0000000064693a2a (&mdev->graph_mutex){+.+.}, at: media_device_ioctl+0x1f8/0x2b8

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&mdev->graph_mutex){+.+.}:
       lock_acquire+0x144/0x39c
       __mutex_lock+0xe8/0xb54
       mutex_lock_nested+0x3c/0x4c
       media_device_register_entity+0x15c/0x308
       v4l2_device_register_subdev+0x1c8/0x288
       v4l2_async_match_notify+0x3c/0x200
       v4l2_async_notifier_try_all_subdevs+0xb8/0xc0
       __v4l2_async_notifier_register+0xac/0x214
       v4l2_async_notifier_register+0x68/0x80
       rcar_vin_probe+0x8d8/0xa0c
       platform_drv_probe+0x70/0xe4
       really_probe+0x2d8/0x3d8
       driver_probe_device+0x154/0x164
       device_driver_attach+0x98/0xa0
       __driver_attach+0xf0/0xf4
       bus_for_each_dev+0x114/0x13c
       driver_attach+0x38/0x44
       bus_add_driver+0x234/0x288
       driver_register+0x148/0x190
       __platform_driver_register+0x84/0x90
       rcar_vin_driver_init+0x20/0x28
       do_one_initcall+0x124/0x68c
       kernel_init_freeable+0xa5c/0xa60
       kernel_init+0x18/0x134
       ret_from_fork+0x10/0x18

-> #1 (list_lock){+.+.}:
       lock_acquire+0x144/0x39c
       __mutex_lock+0xe8/0xb54
       mutex_lock_nested+0x3c/0x4c
       v4l2_async_notifier_add_subdev+0x3c/0xdc
       __v4l2_async_notifier_parse_fwnode_ep+0x240/0x2b8
       v4l2_async_notifier_parse_fwnode_endpoints_by_port+0x4c/0x60
       rcar_vin_probe+0x858/0xa0c
       platform_drv_probe+0x70/0xe4
       really_probe+0x2d8/0x3d8
       driver_probe_device+0x154/0x164
       device_driver_attach+0x98/0xa0
       __driver_attach+0xf0/0xf4
       bus_for_each_dev+0x114/0x13c
       driver_attach+0x38/0x44
       bus_add_driver+0x234/0x288
       driver_register+0x148/0x190
       __platform_driver_register+0x84/0x90
       rcar_vin_driver_init+0x20/0x28
       do_one_initcall+0x124/0x68c
       kernel_init_freeable+0xa5c/0xa60
       kernel_init+0x18/0x134
       ret_from_fork+0x10/0x18

-> #0 (&group->lock){+.+.}:
       __lock_acquire+0x1c7c/0x1dd0
       lock_acquire+0x144/0x39c
       __mutex_lock+0xe8/0xb54
       mutex_lock_nested+0x3c/0x4c
       rvin_group_link_notify+0xc4/0x4f4
       __media_entity_setup_link+0x238/0x2f0
       media_device_setup_link+0x114/0x11c
       media_device_ioctl+0x21c/0x2b8
       __media_ioctl+0x78/0x84
       media_ioctl+0x58/0x68
       vfs_ioctl+0x68/0x78
       do_vfs_ioctl+0x134/0xbfc
       ksys_ioctl+0x68/0x98
       __arm64_sys_ioctl+0x4c/0x60
       el0_svc_common+0xd0/0x16c
       el0_svc_handler+0x94/0xa0
       el0_svc+0x8/0xc

other info that might help us debug this:

Chain exists of:
  &group->lock --> list_lock --> &mdev->graph_mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&mdev->graph_mutex);
                               lock(list_lock);
                               lock(&mdev->graph_mutex);
  lock(&group->lock);

 *** DEADLOCK ***

1 lock held by media-ctl/2407:
 #0: 0000000064693a2a (&mdev->graph_mutex){+.+.}, at: media_device_ioctl+0x1f8/0x2b8

stack backtrace:
CPU: 0 PID: 2407 Comm: media-ctl Tainted: G        W         5.1.0-rc3+ #27
Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
Call trace:
 dump_backtrace+0x0/0x1c0
 show_stack+0x24/0x30
 dump_stack+0xcc/0x128
 print_circular_bug.isra.16+0x22c/0x364
 check_prev_add.constprop.25+0x35c/0x1098
 __lock_acquire+0x1c7c/0x1dd0
 lock_acquire+0x144/0x39c
 __mutex_lock+0xe8/0xb54
 mutex_lock_nested+0x3c/0x4c
 rvin_group_link_notify+0xc4/0x4f4
 __media_entity_setup_link+0x238/0x2f0
 media_device_setup_link+0x114/0x11c
 media_device_ioctl+0x21c/0x2b8
 __media_ioctl+0x78/0x84
 media_ioctl+0x58/0x68
 vfs_ioctl+0x68/0x78
 do_vfs_ioctl+0x134/0xbfc
 ksys_ioctl+0x68/0x98
 __arm64_sys_ioctl+0x4c/0x60
 el0_svc_common+0xd0/0x16c
 el0_svc_handler+0x94/0xa0
 el0_svc+0x8/0xc

Re: [PATCH v14,29/33] rcar-vin: add link notify for Gen3

[Niklas Söderlund]

Hi Eugeniu,

Thanks for your report, the issue is known and fixed in [1] which is in 
the media-tree [2] on it's way to mainline.

1. d950fd992ef89f39 ("media: rcar-vin: Fix lockdep warning at stream on")
2. https://git.linuxtv.org/media_tree.git/

On 2019-04-05 16:17:18 +0200, Eugeniu Rosca wrote:
> Hi Niklas,
> 
> jFYI/FWIW, checking the functionality of rcar-vin using the
> procedure/commands described in https://elinux.org/R-Car/Tests:rcar-vin
> on the recent Linux commit ea2cec24c8d429ee6f99040e4eb6c7ad627fe777, I
> consistently reproduce below lockdep splat [2] (full log and .config at
> https://gist.github.com/erosca/67a46451b3cb342fa59b558022278fff).
> 
> Since the locking primitives of rvin_group_link_notify (popping up in
> the log) haven't suffered changes since v4.18-rc1 commit [1], I conclude
> this thread [0] might be an appropriate place for reporting the issue.
> 
> Best regards,
> Eugeniu.
> 
> [0] https://patchwork.kernel.org/patch/10341183/ [v14,29/33] rcar-vin: add link notify for Gen3
> [1] c0cc5aef31704c ("media: rcar-vin: add link notify for Gen3")
> [2] media-ctl -l "'rcar_csi2 feaa0000.csi2':1 -> 'VIN0 output':0 [1]"
> 
> ======================================================
> WARNING: possible circular locking dependency detected
> 5.1.0-rc3+ #27 Tainted: G        W        
> ------------------------------------------------------
> media-ctl/2407 is trying to acquire lock:
> 00000000be992082 (&group->lock){+.+.}, at: rvin_group_link_notify+0xc4/0x4f4
> 
> but task is already holding lock:
> 0000000064693a2a (&mdev->graph_mutex){+.+.}, at: media_device_ioctl+0x1f8/0x2b8
> 
> which lock already depends on the new lock.
> 
> the existing dependency chain (in reverse order) is:
> 
> -> #2 (&mdev->graph_mutex){+.+.}:
>        lock_acquire+0x144/0x39c
>        __mutex_lock+0xe8/0xb54
>        mutex_lock_nested+0x3c/0x4c
>        media_device_register_entity+0x15c/0x308
>        v4l2_device_register_subdev+0x1c8/0x288
>        v4l2_async_match_notify+0x3c/0x200
>        v4l2_async_notifier_try_all_subdevs+0xb8/0xc0
>        __v4l2_async_notifier_register+0xac/0x214
>        v4l2_async_notifier_register+0x68/0x80
>        rcar_vin_probe+0x8d8/0xa0c
>        platform_drv_probe+0x70/0xe4
>        really_probe+0x2d8/0x3d8
>        driver_probe_device+0x154/0x164
>        device_driver_attach+0x98/0xa0
>        __driver_attach+0xf0/0xf4
>        bus_for_each_dev+0x114/0x13c
>        driver_attach+0x38/0x44
>        bus_add_driver+0x234/0x288
>        driver_register+0x148/0x190
>        __platform_driver_register+0x84/0x90
>        rcar_vin_driver_init+0x20/0x28
>        do_one_initcall+0x124/0x68c
>        kernel_init_freeable+0xa5c/0xa60
>        kernel_init+0x18/0x134
>        ret_from_fork+0x10/0x18
> 
> -> #1 (list_lock){+.+.}:
>        lock_acquire+0x144/0x39c
>        __mutex_lock+0xe8/0xb54
>        mutex_lock_nested+0x3c/0x4c
>        v4l2_async_notifier_add_subdev+0x3c/0xdc
>        __v4l2_async_notifier_parse_fwnode_ep+0x240/0x2b8
>        v4l2_async_notifier_parse_fwnode_endpoints_by_port+0x4c/0x60
>        rcar_vin_probe+0x858/0xa0c
>        platform_drv_probe+0x70/0xe4
>        really_probe+0x2d8/0x3d8
>        driver_probe_device+0x154/0x164
>        device_driver_attach+0x98/0xa0
>        __driver_attach+0xf0/0xf4
>        bus_for_each_dev+0x114/0x13c
>        driver_attach+0x38/0x44
>        bus_add_driver+0x234/0x288
>        driver_register+0x148/0x190
>        __platform_driver_register+0x84/0x90
>        rcar_vin_driver_init+0x20/0x28
>        do_one_initcall+0x124/0x68c
>        kernel_init_freeable+0xa5c/0xa60
>        kernel_init+0x18/0x134
>        ret_from_fork+0x10/0x18
> 
> -> #0 (&group->lock){+.+.}:
>        __lock_acquire+0x1c7c/0x1dd0
>        lock_acquire+0x144/0x39c
>        __mutex_lock+0xe8/0xb54
>        mutex_lock_nested+0x3c/0x4c
>        rvin_group_link_notify+0xc4/0x4f4
>        __media_entity_setup_link+0x238/0x2f0
>        media_device_setup_link+0x114/0x11c
>        media_device_ioctl+0x21c/0x2b8
>        __media_ioctl+0x78/0x84
>        media_ioctl+0x58/0x68
>        vfs_ioctl+0x68/0x78
>        do_vfs_ioctl+0x134/0xbfc
>        ksys_ioctl+0x68/0x98
>        __arm64_sys_ioctl+0x4c/0x60
>        el0_svc_common+0xd0/0x16c
>        el0_svc_handler+0x94/0xa0
>        el0_svc+0x8/0xc
> 
> other info that might help us debug this:
> 
> Chain exists of:
>   &group->lock --> list_lock --> &mdev->graph_mutex
> 
>  Possible unsafe locking scenario:
> 
>        CPU0                    CPU1
>        ----                    ----
>   lock(&mdev->graph_mutex);
>                                lock(list_lock);
>                                lock(&mdev->graph_mutex);
>   lock(&group->lock);
> 
>  *** DEADLOCK ***
> 
> 1 lock held by media-ctl/2407:
>  #0: 0000000064693a2a (&mdev->graph_mutex){+.+.}, at: media_device_ioctl+0x1f8/0x2b8
> 
> stack backtrace:
> CPU: 0 PID: 2407 Comm: media-ctl Tainted: G        W         5.1.0-rc3+ #27
> Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
> Call trace:
>  dump_backtrace+0x0/0x1c0
>  show_stack+0x24/0x30
>  dump_stack+0xcc/0x128
>  print_circular_bug.isra.16+0x22c/0x364
>  check_prev_add.constprop.25+0x35c/0x1098
>  __lock_acquire+0x1c7c/0x1dd0
>  lock_acquire+0x144/0x39c
>  __mutex_lock+0xe8/0xb54
>  mutex_lock_nested+0x3c/0x4c
>  rvin_group_link_notify+0xc4/0x4f4
>  __media_entity_setup_link+0x238/0x2f0
>  media_device_setup_link+0x114/0x11c
>  media_device_ioctl+0x21c/0x2b8
>  __media_ioctl+0x78/0x84
>  media_ioctl+0x58/0x68
>  vfs_ioctl+0x68/0x78
>  do_vfs_ioctl+0x134/0xbfc
>  ksys_ioctl+0x68/0x98
>  __arm64_sys_ioctl+0x4c/0x60
>  el0_svc_common+0xd0/0x16c
>  el0_svc_handler+0x94/0xa0
>  el0_svc+0x8/0xc

-- 
Regards,
Niklas Söderlund

Re: [PATCH v14,29/33] rcar-vin: add link notify for Gen3

[Eugeniu Rosca]

Hi Niklas,

Appreciate the swift reply. I confirm the splat goes away after applying
the suggested patch. Thanks!

On Fri, Apr 05, 2019 at 04:34:07PM +0200, Niklas Söderlund wrote:
> Hi Eugeniu,
> 
> Thanks for your report, the issue is known and fixed in [1] which is in 
> the media-tree [2] on it's way to mainline.
> 
> 1. d950fd992ef89f39 ("media: rcar-vin: Fix lockdep warning at stream on")
> 2. https://git.linuxtv.org/media_tree.git/

[..]

> > Best regards,
> > Eugeniu.