[PATCH RESEND linux-next v4 0/4] Used onboard HUB to reset and add power to hub

[PATCH RESEND linux-next v4 0/4] Used onboard HUB to reset and add power to hub

[Anand Moon]

Amlogic board use gpio-hog to reset the USB hub.
so using onboard hub we could reset the USB hub and
also enable power to the USB hub.

v4: rebased on linux-next
    Fixed some small changes like the subject.
    Dropped the merge patches.

v3: Fix some small changes in $subject
    address the input from Neil
    fix the vialab device tree binding as per Krzysztof inputs.

[2] https://lore.kernel.org/all/20230121175639.12818-2-linux.amoon@gmail.com

v2: Odroid C1 / C2 : usb hub reset working as expected.
    Odroid N2 : dropped usb hub changes, since my board USB hub
                is hitting regression.
    Odroid C4 : Fix the device tree binding and used peer-hub for
                usb2.0 and usb3.0 hub.
[1] https://lore.kernel.org/all/20230118044418.875-10-linux.amoon@gmail.com

v1: Odroid C1 / C2 : were not working as expected.
    Odroid N2 : used single USB 3.0 hub reset.
    Odroid C4 : used single USB 3.0 hub reset.

[0] https://patchwork.kernel.org/project/linux-amlogic/list/?series=707292

Any inputs for these changes ?

Thanks
-Anand

Anand Moon (4):
  ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1
  arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2
  arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4
  dt-bindings: usb: Fix properties for VL817 hub controller

 .../devicetree/bindings/usb/vialab,vl817.yaml | 18 ++++----
 arch/arm/boot/dts/meson8b-odroidc1.dts        |  1 -
 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  |  1 -
 .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 41 +++++++++----------
 4 files changed, 30 insertions(+), 31 deletions(-)

-- 
2.38.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH RESEND linux-next v4 1/4] ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1

[Anand Moon]

Drop superfluous dr_mode="host" as it is the default in meson.dtsi

Fixes: 3325f3e4534c ("ARM: dts: amlogic: Used onboard usb hub reset to enable usb hub")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 941682844faf..1097b35b7a49 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -368,7 +368,6 @@ &usb1_phy {
 };
 
 &usb1 {
-	dr_mode = "host";
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
-- 
2.38.1

[PATCH RESEND linux-next v4 1/4] ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1

[Anand Moon]

Drop superfluous dr_mode="host" as it is the default in meson.dtsi

Fixes: 3325f3e4534c ("ARM: dts: amlogic: Used onboard usb hub reset to enable usb hub")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 941682844faf..1097b35b7a49 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -368,7 +368,6 @@ &usb1_phy {
 };
 
 &usb1 {
-	dr_mode = "host";
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
-- 
2.38.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH RESEND linux-next v4 1/4] ARM: dts: amlogic: Drop superfluous dr_mode in usb node on odroid C1

[Anand Moon]

Drop superfluous dr_mode="host" as it is the default in meson.dtsi

Fixes: 3325f3e4534c ("ARM: dts: amlogic: Used onboard usb hub reset to enable usb hub")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 941682844faf..1097b35b7a49 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -368,7 +368,6 @@ &usb1_phy {
 };
 
 &usb1 {
-	dr_mode = "host";
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
-- 
2.38.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH RESEND linux-next v4 2/4] arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2

[Anand Moon]

Drop superfluous dr_mode="host" as it is the default in meson-gxbb.dtsi

Fixes: f24859bbec8a ("arm64: dts: amlogic: Used onboard usb hub reset on odroid c2")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 01356437a077..70b10934a811 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -399,7 +399,6 @@ &usb0 {
 };
 
 &usb1 {
-	dr_mode = "host";
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
-- 
2.38.1

[PATCH RESEND linux-next v4 2/4] arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2

[Anand Moon]

Drop superfluous dr_mode="host" as it is the default in meson-gxbb.dtsi

Fixes: f24859bbec8a ("arm64: dts: amlogic: Used onboard usb hub reset on odroid c2")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 01356437a077..70b10934a811 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -399,7 +399,6 @@ &usb0 {
 };
 
 &usb1 {
-	dr_mode = "host";
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
-- 
2.38.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH RESEND linux-next v4 2/4] arm64: dts: amlogic: Drop superfluous dr_mode in usb node on odroid c2

[Anand Moon]

Drop superfluous dr_mode="host" as it is the default in meson-gxbb.dtsi

Fixes: f24859bbec8a ("arm64: dts: amlogic: Used onboard usb hub reset on odroid c2")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 01356437a077..70b10934a811 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -399,7 +399,6 @@ &usb0 {
 };
 
 &usb1 {
-	dr_mode = "host";
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";
-- 
2.38.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH RESEND linux-next v4 3/4] arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4

[Anand Moon]

Move the usb-hub node under dwc3 node and drop superfluous
dr_mode as it is the default in meson-g12-common.dtsi.

Fixes: 71593b2020b3 ("arm64: dts: amlogic: Used onboard usb hub reset on odroid c4")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 41 +++++++++----------
 1 file changed, 20 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index d04768a66bfe..a988015dd2d5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -26,30 +26,29 @@ led-blue {
 	sound {
 		model = "ODROID-C4";
 	};
+};
 
+&dwc3 {
 	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
-	usb-hub {
-		dr_mode = "host";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* 2.0 hub on port 1 */
-		hub_2_0: hub@1 {
-			compatible = "usb2109,2817";
-			reg = <1>;
-			peer-hub = <&hub_3_0>;
-			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-			vdd-supply = <&vcc_5v>;
-		};
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb2109,2817";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc_5v>;
+	};
 
-		/* 3.1 hub on port 4 */
-		hub_3_0: hub@2 {
-			compatible = "usb2109,817";
-			reg = <2>;
-			peer-hub = <&hub_2_0>;
-			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-			vdd-supply = <&vcc_5v>;
-		};
+	/* 3.1 hub on port 4 */
+	hub_3_0: hub@2 {
+		compatible = "usb2109,817";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc_5v>;
 	};
 };
 
-- 
2.38.1

[PATCH RESEND linux-next v4 3/4] arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4

[Anand Moon]

Move the usb-hub node under dwc3 node and drop superfluous
dr_mode as it is the default in meson-g12-common.dtsi.

Fixes: 71593b2020b3 ("arm64: dts: amlogic: Used onboard usb hub reset on odroid c4")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 41 +++++++++----------
 1 file changed, 20 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index d04768a66bfe..a988015dd2d5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -26,30 +26,29 @@ led-blue {
 	sound {
 		model = "ODROID-C4";
 	};
+};
 
+&dwc3 {
 	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
-	usb-hub {
-		dr_mode = "host";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* 2.0 hub on port 1 */
-		hub_2_0: hub@1 {
-			compatible = "usb2109,2817";
-			reg = <1>;
-			peer-hub = <&hub_3_0>;
-			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-			vdd-supply = <&vcc_5v>;
-		};
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb2109,2817";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc_5v>;
+	};
 
-		/* 3.1 hub on port 4 */
-		hub_3_0: hub@2 {
-			compatible = "usb2109,817";
-			reg = <2>;
-			peer-hub = <&hub_2_0>;
-			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-			vdd-supply = <&vcc_5v>;
-		};
+	/* 3.1 hub on port 4 */
+	hub_3_0: hub@2 {
+		compatible = "usb2109,817";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc_5v>;
 	};
 };
 
-- 
2.38.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH RESEND linux-next v4 3/4] arm64: dts: meson: move usb-hub node under dwc3 node on Odroid C4

[Anand Moon]

Move the usb-hub node under dwc3 node and drop superfluous
dr_mode as it is the default in meson-g12-common.dtsi.

Fixes: 71593b2020b3 ("arm64: dts: amlogic: Used onboard usb hub reset on odroid c4")
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 .../boot/dts/amlogic/meson-sm1-odroid-c4.dts  | 41 +++++++++----------
 1 file changed, 20 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index d04768a66bfe..a988015dd2d5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -26,30 +26,29 @@ led-blue {
 	sound {
 		model = "ODROID-C4";
 	};
+};
 
+&dwc3 {
 	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
-	usb-hub {
-		dr_mode = "host";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* 2.0 hub on port 1 */
-		hub_2_0: hub@1 {
-			compatible = "usb2109,2817";
-			reg = <1>;
-			peer-hub = <&hub_3_0>;
-			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-			vdd-supply = <&vcc_5v>;
-		};
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb2109,2817";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc_5v>;
+	};
 
-		/* 3.1 hub on port 4 */
-		hub_3_0: hub@2 {
-			compatible = "usb2109,817";
-			reg = <2>;
-			peer-hub = <&hub_2_0>;
-			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
-			vdd-supply = <&vcc_5v>;
-		};
+	/* 3.1 hub on port 4 */
+	hub_3_0: hub@2 {
+		compatible = "usb2109,817";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&vcc_5v>;
 	};
 };
 
-- 
2.38.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller

[Anand Moon]

Cleanup by removing unneeded quotes from refs and
add maxItems to reset-gpios and fix the required list.

Fixes: 31360c28dfdd ("dt-bindings: usb: Add binding for Via lab VL817 hub controller")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 .../devicetree/bindings/usb/vialab,vl817.yaml  | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
index 5f9771e22058..23a13e1d5c7a 100644
--- a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
+++ b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
@@ -14,29 +14,32 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - usb2109,2817
-          - usb2109,817
+    enum:
+      - usb2109,2817
+      - usb2109,817
 
   reg: true
 
   reset-gpios:
-    description: GPIO controlling the RESET# pin.
+    maxItems: 1
+    description:
+      GPIO controlling the RESET# pin.
 
   vdd-supply:
     description:
       phandle to the regulator that provides power to the hub.
 
   peer-hub:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       phandle to the peer hub on the controller.
 
 required:
-  - peer-hub
   - compatible
   - reg
+  - reset-gpios
+  - vdd-supply
+  - peer-hub
 
 additionalProperties: false
 
@@ -45,7 +48,6 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
 
     usb {
-        dr_mode = "host";
         #address-cells = <1>;
         #size-cells = <0>;
 
-- 
2.38.1

[PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller

[Anand Moon]

Cleanup by removing unneeded quotes from refs and
add maxItems to reset-gpios and fix the required list.

Fixes: 31360c28dfdd ("dt-bindings: usb: Add binding for Via lab VL817 hub controller")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 .../devicetree/bindings/usb/vialab,vl817.yaml  | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
index 5f9771e22058..23a13e1d5c7a 100644
--- a/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
+++ b/Documentation/devicetree/bindings/usb/vialab,vl817.yaml
@@ -14,29 +14,32 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - usb2109,2817
-          - usb2109,817
+    enum:
+      - usb2109,2817
+      - usb2109,817
 
   reg: true
 
   reset-gpios:
-    description: GPIO controlling the RESET# pin.
+    maxItems: 1
+    description:
+      GPIO controlling the RESET# pin.
 
   vdd-supply:
     description:
       phandle to the regulator that provides power to the hub.
 
   peer-hub:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       phandle to the peer hub on the controller.
 
 required:
-  - peer-hub
   - compatible
   - reg
+  - reset-gpios
+  - vdd-supply
+  - peer-hub
 
 additionalProperties: false
 
@@ -45,7 +48,6 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
 
     usb {
-        dr_mode = "host";
         #address-cells = <1>;
         #size-cells = <0>;
 
-- 
2.38.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller

[Krzysztof Kozlowski]

On 25/01/2023 08:26, Anand Moon wrote:
> Cleanup by removing unneeded quotes from refs and
> add maxItems to reset-gpios and fix the required list.
> 
> Fixes: 31360c28dfdd ("dt-bindings: usb: Add binding for Via lab VL817 hub controller")
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

NAK.

You ignored my feedback. Please help me understand how my tag appeared here.

Best regards,
Krzysztof

Re: [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller

[Krzysztof Kozlowski]

On 25/01/2023 08:26, Anand Moon wrote:
> Cleanup by removing unneeded quotes from refs and
> add maxItems to reset-gpios and fix the required list.
> 
> Fixes: 31360c28dfdd ("dt-bindings: usb: Add binding for Via lab VL817 hub controller")
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

NAK.

You ignored my feedback. Please help me understand how my tag appeared here.

Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller

[Anand Moon]

Hi Krzysztof,

On Wed, 25 Jan 2023 at 13:10, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 25/01/2023 08:26, Anand Moon wrote:
> > Cleanup by removing unneeded quotes from refs and
> > add maxItems to reset-gpios and fix the required list.
> >
> > Fixes: 31360c28dfdd ("dt-bindings: usb: Add binding for Via lab VL817 hub controller")
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> NAK.
>
> You ignored my feedback. Please help me understand how my tag appeared here.
>
I have followed your feedback and modified the below patch
I thought you review these changes see below.

[0] https://lore.kernel.org/all/df1c8545-01d0-3821-0c19-07a369e40472@linaro.org/

> Best regards,
> Krzysztof
>

Thanks
-Anand

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller

[Anand Moon]

Hi Krzysztof,

On Wed, 25 Jan 2023 at 13:10, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 25/01/2023 08:26, Anand Moon wrote:
> > Cleanup by removing unneeded quotes from refs and
> > add maxItems to reset-gpios and fix the required list.
> >
> > Fixes: 31360c28dfdd ("dt-bindings: usb: Add binding for Via lab VL817 hub controller")
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> NAK.
>
> You ignored my feedback. Please help me understand how my tag appeared here.
>
I have followed your feedback and modified the below patch
I thought you review these changes see below.

[0] https://lore.kernel.org/all/df1c8545-01d0-3821-0c19-07a369e40472@linaro.org/

> Best regards,
> Krzysztof
>

Thanks
-Anand

Re: [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller

[Krzysztof Kozlowski]

On 25/01/2023 10:43, Anand Moon wrote:
> Hi Krzysztof,
> 
> On Wed, 25 Jan 2023 at 13:10, Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>>
>> On 25/01/2023 08:26, Anand Moon wrote:
>>> Cleanup by removing unneeded quotes from refs and
>>> add maxItems to reset-gpios and fix the required list.
>>>
>>> Fixes: 31360c28dfdd ("dt-bindings: usb: Add binding for Via lab VL817 hub controller")
>>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>
>> NAK.
>>
>> You ignored my feedback. Please help me understand how my tag appeared here.
>>
> I have followed your feedback and modified the below patch
> I thought you review these changes see below.
> 
> [0] https://lore.kernel.org/all/df1c8545-01d0-3821-0c19-07a369e40472@linaro.org/

This was entirely different patch. You cannot take reviews from
something else and apply to other patch.

Best regards,
Krzysztof

Re: [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller

[Krzysztof Kozlowski]

On 25/01/2023 10:43, Anand Moon wrote:
> Hi Krzysztof,
> 
> On Wed, 25 Jan 2023 at 13:10, Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>>
>> On 25/01/2023 08:26, Anand Moon wrote:
>>> Cleanup by removing unneeded quotes from refs and
>>> add maxItems to reset-gpios and fix the required list.
>>>
>>> Fixes: 31360c28dfdd ("dt-bindings: usb: Add binding for Via lab VL817 hub controller")
>>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>
>> NAK.
>>
>> You ignored my feedback. Please help me understand how my tag appeared here.
>>
> I have followed your feedback and modified the below patch
> I thought you review these changes see below.
> 
> [0] https://lore.kernel.org/all/df1c8545-01d0-3821-0c19-07a369e40472@linaro.org/

This was entirely different patch. You cannot take reviews from
something else and apply to other patch.

Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller

[Anand Moon]

Hi Krzysztof,

On Wed, 25 Jan 2023 at 15:27, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 25/01/2023 10:43, Anand Moon wrote:
> > Hi Krzysztof,
> >
> > On Wed, 25 Jan 2023 at 13:10, Krzysztof Kozlowski
> > <krzysztof.kozlowski@linaro.org> wrote:
> >>
> >> On 25/01/2023 08:26, Anand Moon wrote:
> >>> Cleanup by removing unneeded quotes from refs and
> >>> add maxItems to reset-gpios and fix the required list.
> >>>
> >>> Fixes: 31360c28dfdd ("dt-bindings: usb: Add binding for Via lab VL817 hub controller")
> >>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >>
> >> NAK.
> >>
> >> You ignored my feedback. Please help me understand how my tag appeared here.
> >>
> > I have followed your feedback and modified the below patch
> > I thought you review these changes see below.
> >
> > [0] https://lore.kernel.org/all/df1c8545-01d0-3821-0c19-07a369e40472@linaro.org/
>
> This was entirely different patch. You cannot take reviews from
> something else and apply to other patch.
>
> Best regards,
> Krzysztof
>
ok, I will keep this in my mind.

 Thanks
-Anand

Re: [PATCH RESEND linux-next v4 4/4] dt-bindings: usb: Fix properties for VL817 hub controller

[Anand Moon]

Hi Krzysztof,

On Wed, 25 Jan 2023 at 15:27, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 25/01/2023 10:43, Anand Moon wrote:
> > Hi Krzysztof,
> >
> > On Wed, 25 Jan 2023 at 13:10, Krzysztof Kozlowski
> > <krzysztof.kozlowski@linaro.org> wrote:
> >>
> >> On 25/01/2023 08:26, Anand Moon wrote:
> >>> Cleanup by removing unneeded quotes from refs and
> >>> add maxItems to reset-gpios and fix the required list.
> >>>
> >>> Fixes: 31360c28dfdd ("dt-bindings: usb: Add binding for Via lab VL817 hub controller")
> >>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> >>
> >> NAK.
> >>
> >> You ignored my feedback. Please help me understand how my tag appeared here.
> >>
> > I have followed your feedback and modified the below patch
> > I thought you review these changes see below.
> >
> > [0] https://lore.kernel.org/all/df1c8545-01d0-3821-0c19-07a369e40472@linaro.org/
>
> This was entirely different patch. You cannot take reviews from
> something else and apply to other patch.
>
> Best regards,
> Krzysztof
>
ok, I will keep this in my mind.

 Thanks
-Anand

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic