* [Intel-wired-lan] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC @ 2021-07-27 6:23 Yuvaraj Ranganathan 2021-07-27 15:04 ` [Intel-wired-lan] [E1000-devel] " Fujinaka, Todd 2021-07-29 2:11 ` Laurent Dumont 0 siblings, 2 replies; 6+ messages in thread From: Yuvaraj Ranganathan @ 2021-07-27 6:23 UTC (permalink / raw) To: intel-wired-lan Hi Team, With the SR-IOV enabled on I350 NIC which has 4 VF?s, on configuring VLAN ID from range 1 to 31 on the VM interface, network traffic is fine and no issues. When trying to create an interface with VLAN ID >= 32 on the VM, traffic is not passing to that interface and as per HW specs, VLAN ID?s from 1 to 4096 are supported. VM?s interface is directly mapped to one of the VF on I350 NIC. I am using IGB PF driver version 5.7.2(latest). Could somebody please help! Thanks in advance, Yuvaraj. Juniper Business Use Only -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20210727/19cc49b5/attachment.html> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [Intel-wired-lan] [E1000-devel] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC 2021-07-27 6:23 [Intel-wired-lan] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC Yuvaraj Ranganathan @ 2021-07-27 15:04 ` Fujinaka, Todd 2021-07-27 16:04 ` Fujinaka, Todd 2021-07-29 2:11 ` Laurent Dumont 1 sibling, 1 reply; 6+ messages in thread From: Fujinaka, Todd @ 2021-07-27 15:04 UTC (permalink / raw) To: intel-wired-lan Can you please file this through your company contact? I think you have very specific requirements that we can't discuss on a public mailing list. Todd Fujinaka Software Application Engineer Data Center Group Intel Corporation todd.fujinaka at intel.com -----Original Message----- From: Yuvaraj Ranganathan via E1000-devel <e1000-devel@lists.sourceforge.net> Sent: Monday, July 26, 2021 11:23 PM To: e1000-devel@lists.sourceforge.net; intel-wired-lan at lists.osuosl.org Cc: Pushp Saurav <psaurav@juniper.net> Subject: [E1000-devel] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC Hi Team, With the SR-IOV enabled on I350 NIC which has 4 VF's, on configuring VLAN ID from range 1 to 31 on the VM interface, network traffic is fine and no issues. When trying to create an interface with VLAN ID >= 32 on the VM, traffic is not passing to that interface and as per HW specs, VLAN ID's from 1 to 4096 are supported. VM's interface is directly mapped to one of the VF on I350 NIC. I am using IGB PF driver version 5.7.2(latest). Could somebody please help! Thanks in advance, Yuvaraj. Juniper Business Use Only _______________________________________________ E1000-devel mailing list E1000-devel at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel Ethernet, visit https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet ^ permalink raw reply [flat|nested] 6+ messages in thread
* [Intel-wired-lan] [E1000-devel] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC 2021-07-27 15:04 ` [Intel-wired-lan] [E1000-devel] " Fujinaka, Todd @ 2021-07-27 16:04 ` Fujinaka, Todd 0 siblings, 0 replies; 6+ messages in thread From: Fujinaka, Todd @ 2021-07-27 16:04 UTC (permalink / raw) To: intel-wired-lan You've already reported this internally, and you've mailed this to two different mailing lists. This just delays the issue so please go through the internal route. Todd Fujinaka Software Application Engineer Data Center Group Intel Corporation todd.fujinaka at intel.com -----Original Message----- From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of Fujinaka, Todd Sent: Tuesday, July 27, 2021 8:04 AM To: Yuvaraj Ranganathan <yranganathan@juniper.net>; intel-wired-lan at lists.osuosl.org Cc: Pushp Saurav <psaurav@juniper.net> Subject: Re: [Intel-wired-lan] [E1000-devel] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC Can you please file this through your company contact? I think you have very specific requirements that we can't discuss on a public mailing list. Todd Fujinaka Software Application Engineer Data Center Group Intel Corporation todd.fujinaka at intel.com -----Original Message----- From: Yuvaraj Ranganathan via E1000-devel <e1000-devel@lists.sourceforge.net> Sent: Monday, July 26, 2021 11:23 PM To: e1000-devel@lists.sourceforge.net; intel-wired-lan at lists.osuosl.org Cc: Pushp Saurav <psaurav@juniper.net> Subject: [E1000-devel] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC Hi Team, With the SR-IOV enabled on I350 NIC which has 4 VF's, on configuring VLAN ID from range 1 to 31 on the VM interface, network traffic is fine and no issues. When trying to create an interface with VLAN ID >= 32 on the VM, traffic is not passing to that interface and as per HW specs, VLAN ID's from 1 to 4096 are supported. VM's interface is directly mapped to one of the VF on I350 NIC. I am using IGB PF driver version 5.7.2(latest). Could somebody please help! Thanks in advance, Yuvaraj. Juniper Business Use Only _______________________________________________ E1000-devel mailing list E1000-devel at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel Ethernet, visit https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet _______________________________________________ Intel-wired-lan mailing list Intel-wired-lan at osuosl.org https://lists.osuosl.org/mailman/listinfo/intel-wired-lan ^ permalink raw reply [flat|nested] 6+ messages in thread
* [Intel-wired-lan] [E1000-devel] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC 2021-07-27 6:23 [Intel-wired-lan] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC Yuvaraj Ranganathan 2021-07-27 15:04 ` [Intel-wired-lan] [E1000-devel] " Fujinaka, Todd @ 2021-07-29 2:11 ` Laurent Dumont 2021-07-29 9:37 ` Yuvaraj Ranganathan 1 sibling, 1 reply; 6+ messages in thread From: Laurent Dumont @ 2021-07-29 2:11 UTC (permalink / raw) To: intel-wired-lan Can you show the output of ip link show $SRIOV_INT_NAME_HERE Are you seeing any traffic reaching inside the VM if you tcpdump there? On Tue, Jul 27, 2021 at 10:07 AM Yuvaraj Ranganathan via E1000-devel < e1000-devel@lists.sourceforge.net> wrote: > Hi Team, > > With the SR-IOV enabled on I350 NIC which has 4 VF?s, on configuring VLAN > ID from range 1 to 31 on the VM interface, network traffic is fine and no > issues. When trying to create an interface with VLAN ID >= 32 on the VM, > traffic is not passing to that interface and as per HW specs, VLAN ID?s > from 1 to 4096 are supported. > > VM?s interface is directly mapped to one of the VF on I350 NIC. I am using > IGB PF driver version 5.7.2(latest). > > Could somebody please help! > > Thanks in advance, > Yuvaraj. > > > Juniper Business Use Only > > _______________________________________________ > E1000-devel mailing list > E1000-devel at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/e1000-devel > To learn more about Intel Ethernet, visit > https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20210728/6e31a24c/attachment-0001.html> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [Intel-wired-lan] [E1000-devel] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC 2021-07-29 2:11 ` Laurent Dumont @ 2021-07-29 9:37 ` Yuvaraj Ranganathan 2021-07-29 12:34 ` Laurent Dumont 0 siblings, 1 reply; 6+ messages in thread From: Yuvaraj Ranganathan @ 2021-07-29 9:37 UTC (permalink / raw) To: intel-wired-lan Hi Laurent, Thanks for your help. Below is the information of SR-IOV interface, where VF 2 is directly mapped to VM interface. root at local-node:~# ip link show heth-0-1 5: heth-0-1: <BROADCAST,MULTICAST,ALLMULTI,PROMISC,UP,LOWER_UP> mtu 9192 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 58:00:bb:aa:ee:49 brd ff:ff:ff:ff:ff:ff vf 0 MAC aa:81:c7:6f:b4:0a, spoof checking on, link-state auto, trust on vf 1 MAC 16:26:97:40:0f:86, spoof checking on, link-state auto, trust on vf 2 MAC 58:00:bb:aa:ee:60, spoof checking on, link-state auto, trust on vf 3 MAC 22:28:fa:f4:68:1a, spoof checking on, link-state auto, trust on root at local-node:~# On configuring the VLAN >=32 on the VM interface and tried sending outgoing traffic, there is no packet captured in tcpdump at SR-IOV(heth-0-1) interface. In case of VLAN <= 31, the outgoing packet captured in tcpdump at heth-0-1 interface. You help is always appreciated! Thanks, Yuvaraj. From: Laurent Dumont <laurentfdumont@gmail.com> Date: Thursday, 29 July 2021 at 7:41 AM To: Yuvaraj Ranganathan <yranganathan@juniper.net> Cc: e1000-devel at lists.sourceforge.net <e1000-devel@lists.sourceforge.net>, intel-wired-lan at lists.osuosl.org <intel-wired-lan@lists.osuosl.org>, Pushp Saurav <psaurav@juniper.net> Subject: Re: [E1000-devel] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC [External Email. Be cautious of content] Can you show the output of ip link show $SRIOV_INT_NAME_HERE Are you seeing any traffic reaching inside the VM if you tcpdump there? On Tue, Jul 27, 2021 at 10:07 AM Yuvaraj Ranganathan via E1000-devel <e1000-devel at lists.sourceforge.net<mailto:e1000-devel@lists.sourceforge.net>> wrote: Hi Team, With the SR-IOV enabled on I350 NIC which has 4 VF?s, on configuring VLAN ID from range 1 to 31 on the VM interface, network traffic is fine and no issues. When trying to create an interface with VLAN ID >= 32 on the VM, traffic is not passing to that interface and as per HW specs, VLAN ID?s from 1 to 4096 are supported. VM?s interface is directly mapped to one of the VF on I350 NIC. I am using IGB PF driver version 5.7.2(latest). Could somebody please help! Thanks in advance, Yuvaraj. Juniper Business Use Only _______________________________________________ E1000-devel mailing list E1000-devel at lists.sourceforge.net<mailto:E1000-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/e1000-devel<https://urldefense.com/v3/__https:/lists.sourceforge.net/lists/listinfo/e1000-devel__;!!NEt6yMaO-gk!XuSTry-yCsDfr50s_cea2F8i2aZsn1EgmahFyYNsHaHk47t9o3oazDYLdf8qTZlJS5Q$> To learn more about Intel Ethernet, visit https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet<https://urldefense.com/v3/__https:/forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet__;!!NEt6yMaO-gk!XuSTry-yCsDfr50s_cea2F8i2aZsn1EgmahFyYNsHaHk47t9o3oazDYLdf8qBIRweU8$> Juniper Business Use Only -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20210729/8be33ee8/attachment-0001.html> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [Intel-wired-lan] [E1000-devel] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC 2021-07-29 9:37 ` Yuvaraj Ranganathan @ 2021-07-29 12:34 ` Laurent Dumont 0 siblings, 0 replies; 6+ messages in thread From: Laurent Dumont @ 2021-07-29 12:34 UTC (permalink / raw) To: intel-wired-lan Strange! Sorry, not sure what else to validate. I figured you might have been using vlan filters on the VF directly but you see to use them as bare VF. With a vlan specified at the VF level, it would have shown something like vf 19 MAC fa:16:3e:d3:f7:f0, vlan 65, spoof checking on, link-state auto, trust on I do wonder if there is a vlan limit on the VF side. 4096 is a IEEE standard max for VLANs because it's a 12 bit field in the ethernet frame but it could be lower for the SRIOV part. Can you try vlan ID 60 to 91? On Thu, Jul 29, 2021 at 5:37 AM Yuvaraj Ranganathan < yranganathan@juniper.net> wrote: > Hi Laurent, > > Thanks for your help. > > > Below is the information of SR-IOV interface, where VF 2 is directly > mapped to VM interface. > > > > root at local-node:~# ip link show heth-0-1 > > 5: heth-0-1: <BROADCAST,MULTICAST,ALLMULTI,PROMISC,UP,LOWER_UP> mtu 9192 > qdisc mq state UP mode DEFAULT group default qlen 1000 > > link/ether 58:00:bb:aa:ee:49 brd ff:ff:ff:ff:ff:ff > > vf 0 MAC aa:81:c7:6f:b4:0a, spoof checking on, link-state auto, trust > on > > vf 1 MAC 16:26:97:40:0f:86, spoof checking on, link-state auto, trust > on > > vf 2 MAC 58:00:bb:aa:ee:60, spoof checking on, link-state auto, trust > on > > vf 3 MAC 22:28:fa:f4:68:1a, spoof checking on, link-state auto, trust > on > > root at local-node:~# > > On configuring the VLAN >=32 on the VM interface and tried sending > outgoing traffic, there is no packet captured in tcpdump at > SR-IOV(heth-0-1) interface. In case of VLAN <= 31, the outgoing packet > captured in tcpdump at heth-0-1 interface. > > You help is always appreciated! > > > Thanks, > > Yuvaraj. > > > > *From: *Laurent Dumont <laurentfdumont@gmail.com> > *Date: *Thursday, 29 July 2021 at 7:41 AM > *To: *Yuvaraj Ranganathan <yranganathan@juniper.net> > *Cc: *e1000-devel at lists.sourceforge.net <e1000-devel@lists.sourceforge.net>, > intel-wired-lan at lists.osuosl.org <intel-wired-lan@lists.osuosl.org>, > Pushp Saurav <psaurav@juniper.net> > *Subject: *Re: [E1000-devel] Traffic not passing for VLAN ID >= 32 on the > I350 SR-IOV enabled NIC > > *[External Email. Be cautious of content]* > > > > Can you show the output of > > > > ip link show $SRIOV_INT_NAME_HERE > > > > Are you seeing any traffic reaching inside the VM if you tcpdump there? > > > > On Tue, Jul 27, 2021 at 10:07 AM Yuvaraj Ranganathan via E1000-devel < > e1000-devel at lists.sourceforge.net> wrote: > > Hi Team, > > With the SR-IOV enabled on I350 NIC which has 4 VF?s, on configuring VLAN > ID from range 1 to 31 on the VM interface, network traffic is fine and no > issues. When trying to create an interface with VLAN ID >= 32 on the VM, > traffic is not passing to that interface and as per HW specs, VLAN ID?s > from 1 to 4096 are supported. > > VM?s interface is directly mapped to one of the VF on I350 NIC. I am using > IGB PF driver version 5.7.2(latest). > > Could somebody please help! > > Thanks in advance, > Yuvaraj. > > > Juniper Business Use Only > > _______________________________________________ > E1000-devel mailing list > E1000-devel at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/e1000-devel > <https://urldefense.com/v3/__https:/lists.sourceforge.net/lists/listinfo/e1000-devel__;!!NEt6yMaO-gk!XuSTry-yCsDfr50s_cea2F8i2aZsn1EgmahFyYNsHaHk47t9o3oazDYLdf8qTZlJS5Q$> > To learn more about Intel Ethernet, visit > https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet > <https://urldefense.com/v3/__https:/forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet__;!!NEt6yMaO-gk!XuSTry-yCsDfr50s_cea2F8i2aZsn1EgmahFyYNsHaHk47t9o3oazDYLdf8qBIRweU8$> > > > Juniper Business Use Only > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.osuosl.org/pipermail/intel-wired-lan/attachments/20210729/87cf1145/attachment.html> ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-07-29 12:34 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-07-27 6:23 [Intel-wired-lan] Traffic not passing for VLAN ID >= 32 on the I350 SR-IOV enabled NIC Yuvaraj Ranganathan 2021-07-27 15:04 ` [Intel-wired-lan] [E1000-devel] " Fujinaka, Todd 2021-07-27 16:04 ` Fujinaka, Todd 2021-07-29 2:11 ` Laurent Dumont 2021-07-29 9:37 ` Yuvaraj Ranganathan 2021-07-29 12:34 ` Laurent Dumont
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.