* [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit
@ 2018-10-25 15:09 ` Alex Gonzalez
0 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: thierry.reding, airlied, dri-devel, shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
Add support for a LVDS panel accessory kit consisting of:
* AU Optronics G101EVN010 10.1 inches TFT-LCD display
* Goodix GT911 capacitive touch controller
This is used with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board.
Changes in v1 from initial changeset [1]:
* Split configuration change into a different commit
* Provide meaningful commit messages
* Use the new DRM mxsfb driver for the AUO G101EVN010 panel
[1] https://lore.kernel.org/lkml/1540204399-12982-1-git-send-email-alex.gonzalez@digi.com/
Alex Gonzalez (4):
drm/panel: simple: Add AUO G101EVN010 panel support
ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
.../bindings/display/panel/auo,g101evn010 | 12 +++++++
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 37 ++++++++++++++++++++++
arch/arm/configs/imx_v6_v7_defconfig | 1 +
drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++
4 files changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit
@ 2018-10-25 15:09 ` Alex Gonzalez
0 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: thierry.reding, airlied, dri-devel, shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
Add support for a LVDS panel accessory kit consisting of:
* AU Optronics G101EVN010 10.1 inches TFT-LCD display
* Goodix GT911 capacitive touch controller
This is used with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board.
Changes in v1 from initial changeset [1]:
* Split configuration change into a different commit
* Provide meaningful commit messages
* Use the new DRM mxsfb driver for the AUO G101EVN010 panel
[1] https://lore.kernel.org/lkml/1540204399-12982-1-git-send-email-alex.gonzalez@digi.com/
Alex Gonzalez (4):
drm/panel: simple: Add AUO G101EVN010 panel support
ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
.../bindings/display/panel/auo,g101evn010 | 12 +++++++
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 37 ++++++++++++++++++++++
arch/arm/configs/imx_v6_v7_defconfig | 1 +
drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++
4 files changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit
@ 2018-10-25 15:09 ` Alex Gonzalez
0 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
Add support for a LVDS panel accessory kit consisting of:
* AU Optronics G101EVN010 10.1 inches TFT-LCD display
* Goodix GT911 capacitive touch controller
This is used with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board.
Changes in v1 from initial changeset [1]:
* Split configuration change into a different commit
* Provide meaningful commit messages
* Use the new DRM mxsfb driver for the AUO G101EVN010 panel
[1] https://lore.kernel.org/lkml/1540204399-12982-1-git-send-email-alex.gonzalez at digi.com/
Alex Gonzalez (4):
drm/panel: simple: Add AUO G101EVN010 panel support
ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
.../bindings/display/panel/auo,g101evn010 | 12 +++++++
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 37 ++++++++++++++++++++++
arch/arm/configs/imx_v6_v7_defconfig | 1 +
drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++
4 files changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support
2018-10-25 15:09 ` Alex Gonzalez
(?)
@ 2018-10-25 15:09 ` Alex Gonzalez
-1 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: thierry.reding, airlied, dri-devel, shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
panel.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
.../bindings/display/panel/auo,g101evn010 | 12 ++++++++++
drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
2 files changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 b/Documentation/devicetree/bindings/display/panel/auo,g101evn010
new file mode 100644
index 000000000000..bc6a0c858e23
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010
@@ -0,0 +1,12 @@
+AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g101evn010"
+- power-supply: as specified in the base binding
+
+Optional properties:
+- backlight: as specified in the base binding
+- enable-gpios: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 97964f7f2ace..65a0dd166637 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -631,6 +631,30 @@ static const struct panel_desc auo_g104sn02 = {
},
};
+static const struct drm_display_mode auo_g101evn010_mode = {
+ .clock = 68930,
+ .hdisplay = 1280,
+ .hsync_start = 1280 + 82,
+ .hsync_end = 1280 + 82 + 2,
+ .htotal = 1280 + 82 + 2 + 84,
+ .vdisplay = 800,
+ .vsync_start = 800 + 8,
+ .vsync_end = 800 + 8 + 2,
+ .vtotal = 800 + 8 + 2 + 6,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc auo_g101evn010 = {
+ .modes = &auo_g101evn010_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 216,
+ .height = 135,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+};
+
static const struct display_timing auo_g133han01_timings = {
.pixelclock = { 134000000, 141200000, 149000000 },
.hactive = { 1920, 1920, 1920 },
@@ -2355,6 +2379,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "auo,g104sn02",
.data = &auo_g104sn02,
}, {
+ .compatible = "auo,g101evn010",
+ .data = &auo_g101evn010,
+ }, {
.compatible = "auo,g133han01",
.data = &auo_g133han01,
}, {
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support
@ 2018-10-25 15:09 ` Alex Gonzalez
0 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: thierry.reding, airlied, dri-devel, shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
panel.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
.../bindings/display/panel/auo,g101evn010 | 12 ++++++++++
drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
2 files changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 b/Documentation/devicetree/bindings/display/panel/auo,g101evn010
new file mode 100644
index 000000000000..bc6a0c858e23
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010
@@ -0,0 +1,12 @@
+AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g101evn010"
+- power-supply: as specified in the base binding
+
+Optional properties:
+- backlight: as specified in the base binding
+- enable-gpios: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 97964f7f2ace..65a0dd166637 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -631,6 +631,30 @@ static const struct panel_desc auo_g104sn02 = {
},
};
+static const struct drm_display_mode auo_g101evn010_mode = {
+ .clock = 68930,
+ .hdisplay = 1280,
+ .hsync_start = 1280 + 82,
+ .hsync_end = 1280 + 82 + 2,
+ .htotal = 1280 + 82 + 2 + 84,
+ .vdisplay = 800,
+ .vsync_start = 800 + 8,
+ .vsync_end = 800 + 8 + 2,
+ .vtotal = 800 + 8 + 2 + 6,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc auo_g101evn010 = {
+ .modes = &auo_g101evn010_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 216,
+ .height = 135,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+};
+
static const struct display_timing auo_g133han01_timings = {
.pixelclock = { 134000000, 141200000, 149000000 },
.hactive = { 1920, 1920, 1920 },
@@ -2355,6 +2379,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "auo,g104sn02",
.data = &auo_g104sn02,
}, {
+ .compatible = "auo,g101evn010",
+ .data = &auo_g101evn010,
+ }, {
.compatible = "auo,g133han01",
.data = &auo_g133han01,
}, {
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support
@ 2018-10-25 15:09 ` Alex Gonzalez
0 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
panel.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
.../bindings/display/panel/auo,g101evn010 | 12 ++++++++++
drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
2 files changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
diff --git a/Documentation/devicetree/bindings/display/panel/auo,g101evn010 b/Documentation/devicetree/bindings/display/panel/auo,g101evn010
new file mode 100644
index 000000000000..bc6a0c858e23
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,g101evn010
@@ -0,0 +1,12 @@
+AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,g101evn010"
+- power-supply: as specified in the base binding
+
+Optional properties:
+- backlight: as specified in the base binding
+- enable-gpios: as specified in the base binding
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 97964f7f2ace..65a0dd166637 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -631,6 +631,30 @@ static const struct panel_desc auo_g104sn02 = {
},
};
+static const struct drm_display_mode auo_g101evn010_mode = {
+ .clock = 68930,
+ .hdisplay = 1280,
+ .hsync_start = 1280 + 82,
+ .hsync_end = 1280 + 82 + 2,
+ .htotal = 1280 + 82 + 2 + 84,
+ .vdisplay = 800,
+ .vsync_start = 800 + 8,
+ .vsync_end = 800 + 8 + 2,
+ .vtotal = 800 + 8 + 2 + 6,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc auo_g101evn010 = {
+ .modes = &auo_g101evn010_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 216,
+ .height = 135,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+};
+
static const struct display_timing auo_g133han01_timings = {
.pixelclock = { 134000000, 141200000, 149000000 },
.hactive = { 1920, 1920, 1920 },
@@ -2355,6 +2379,9 @@ static const struct of_device_id platform_of_match[] = {
.compatible = "auo,g104sn02",
.data = &auo_g104sn02,
}, {
+ .compatible = "auo,g101evn010",
+ .data = &auo_g101evn010,
+ }, {
.compatible = "auo,g133han01",
.data = &auo_g133han01,
}, {
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
2018-10-25 15:09 ` Alex Gonzalez
(?)
@ 2018-10-25 15:09 ` Alex Gonzalez
-1 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: thierry.reding, airlied, dri-devel, shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
This change adds support for the AUO G101EVN010 lcdif panel for the
mxsfb DRM driver.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index 11966d12af76..f6e6b2cf780b 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -24,6 +24,18 @@
status = "okay";
};
+ panel {
+ compatible = "auo,g101evn010", "simple-panel";
+ power-supply = <&ldo4_ext>;
+ backlight = <&lcd_backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
reg_usb_otg1_vbus: regulator-usb-otg1 {
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
@@ -112,6 +124,12 @@
&pinctrl_lcdif_hvsync>;
lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
};
&ldo4_ext {
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
@ 2018-10-25 15:09 ` Alex Gonzalez
0 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: thierry.reding, airlied, dri-devel, shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
This change adds support for the AUO G101EVN010 lcdif panel for the
mxsfb DRM driver.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index 11966d12af76..f6e6b2cf780b 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -24,6 +24,18 @@
status = "okay";
};
+ panel {
+ compatible = "auo,g101evn010", "simple-panel";
+ power-supply = <&ldo4_ext>;
+ backlight = <&lcd_backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
reg_usb_otg1_vbus: regulator-usb-otg1 {
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
@@ -112,6 +124,12 @@
&pinctrl_lcdif_hvsync>;
lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
};
&ldo4_ext {
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
@ 2018-10-25 15:09 ` Alex Gonzalez
0 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
This change adds support for the AUO G101EVN010 lcdif panel for the
mxsfb DRM driver.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index 11966d12af76..f6e6b2cf780b 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -24,6 +24,18 @@
status = "okay";
};
+ panel {
+ compatible = "auo,g101evn010", "simple-panel";
+ power-supply = <&ldo4_ext>;
+ backlight = <&lcd_backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
reg_usb_otg1_vbus: regulator-usb-otg1 {
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
@@ -112,6 +124,12 @@
&pinctrl_lcdif_hvsync>;
lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
};
&ldo4_ext {
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
2018-10-25 15:09 ` Alex Gonzalez
(?)
@ 2018-10-25 15:09 ` Alex Gonzalez
-1 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: thierry.reding, airlied, dri-devel, shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch
screen by default on Digi International's AUO/Goodix LCD accessory kit used
with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 7eca43ff69bb..d6e947307d67 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -170,6 +170,7 @@ CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
@ 2018-10-25 15:09 ` Alex Gonzalez
0 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: thierry.reding, airlied, dri-devel, shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch
screen by default on Digi International's AUO/Goodix LCD accessory kit used
with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 7eca43ff69bb..d6e947307d67 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -170,6 +170,7 @@ CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
@ 2018-10-25 15:09 ` Alex Gonzalez
0 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch
screen by default on Digi International's AUO/Goodix LCD accessory kit used
with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 7eca43ff69bb..d6e947307d67 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -170,6 +170,7 @@ CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_GOODIX=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
2018-10-25 15:09 ` Alex Gonzalez
(?)
@ 2018-10-25 15:09 ` Alex Gonzalez
-1 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: thierry.reding, airlied, dri-devel, shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is
connected on the LVDS interface through an on-board LVDS transceiver.
This change adds support for the touch interface.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index f6e6b2cf780b..3749fdda3611 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -117,6 +117,19 @@
};
};
+&i2c1 {
+ touchscreen@14 {
+ compatible = "goodix,gt911";
+ reg = <0x14>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_goodix_touch>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+};
+
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat0_17
@@ -290,6 +303,12 @@
>;
};
+ pinctrl_goodix_touch: goodixgrp{
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020
+ >;
+ };
+
pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
fsl,pins = <
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
@ 2018-10-25 15:09 ` Alex Gonzalez
0 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: thierry.reding, airlied, dri-devel, shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is
connected on the LVDS interface through an on-board LVDS transceiver.
This change adds support for the touch interface.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index f6e6b2cf780b..3749fdda3611 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -117,6 +117,19 @@
};
};
+&i2c1 {
+ touchscreen@14 {
+ compatible = "goodix,gt911";
+ reg = <0x14>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_goodix_touch>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+};
+
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat0_17
@@ -290,6 +303,12 @@
>;
};
+ pinctrl_goodix_touch: goodixgrp{
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020
+ >;
+ };
+
pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
fsl,pins = <
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
@ 2018-10-25 15:09 ` Alex Gonzalez
0 siblings, 0 replies; 38+ messages in thread
From: Alex Gonzalez @ 2018-10-25 15:09 UTC (permalink / raw)
To: linux-arm-kernel
The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is
connected on the LVDS interface through an on-board LVDS transceiver.
This change adds support for the touch interface.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index f6e6b2cf780b..3749fdda3611 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -117,6 +117,19 @@
};
};
+&i2c1 {
+ touchscreen at 14 {
+ compatible = "goodix,gt911";
+ reg = <0x14>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_goodix_touch>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ irq-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+};
+
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat0_17
@@ -290,6 +303,12 @@
>;
};
+ pinctrl_goodix_touch: goodixgrp{
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1020
+ >;
+ };
+
pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
fsl,pins = <
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
^ permalink raw reply related [flat|nested] 38+ messages in thread
* Re: [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
2018-10-25 15:09 ` Alex Gonzalez
(?)
@ 2018-10-25 15:56 ` Fabio Estevam
-1 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2018-10-25 15:56 UTC (permalink / raw)
To: Gonzalez, Alex
Cc: Thierry Reding, David Airlie, DRI mailing list, Shawn Guo,
Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Sascha Hauer, linux-kernel, Rob Herring, NXP Linux Team,
Sascha Hauer, Fabio Estevam,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
On Thu, Oct 25, 2018 at 12:11 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote:
>
> This change adds support for the AUO G101EVN010 lcdif panel for the
> mxsfb DRM driver.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
> ---
> arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
> index 11966d12af76..f6e6b2cf780b 100644
> --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
> +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
> @@ -24,6 +24,18 @@
> status = "okay";
> };
>
> + panel {
> + compatible = "auo,g101evn010", "simple-panel";
The "simple-panel" string could be dropped.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
> + power-supply = <&ldo4_ext>;
> + backlight = <&lcd_backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> + };
> +
> reg_usb_otg1_vbus: regulator-usb-otg1 {
> compatible = "regulator-fixed";
> regulator-name = "usb_otg1_vbus";
> @@ -112,6 +124,12 @@
> &pinctrl_lcdif_hvsync>;
> lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
> status = "okay";
> +
> + port {
> + display_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> };
>
> &ldo4_ext {
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
@ 2018-10-25 15:56 ` Fabio Estevam
0 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2018-10-25 15:56 UTC (permalink / raw)
To: Gonzalez, Alex
Cc: Thierry Reding, David Airlie, DRI mailing list, Shawn Guo,
Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Sascha Hauer, linux-kernel, Rob Herring, NXP Linux Team,
Sascha Hauer, Fabio Estevam,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
On Thu, Oct 25, 2018 at 12:11 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote:
>
> This change adds support for the AUO G101EVN010 lcdif panel for the
> mxsfb DRM driver.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
> ---
> arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
> index 11966d12af76..f6e6b2cf780b 100644
> --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
> +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
> @@ -24,6 +24,18 @@
> status = "okay";
> };
>
> + panel {
> + compatible = "auo,g101evn010", "simple-panel";
The "simple-panel" string could be dropped.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
> + power-supply = <&ldo4_ext>;
> + backlight = <&lcd_backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> + };
> +
> reg_usb_otg1_vbus: regulator-usb-otg1 {
> compatible = "regulator-fixed";
> regulator-name = "usb_otg1_vbus";
> @@ -112,6 +124,12 @@
> &pinctrl_lcdif_hvsync>;
> lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
> status = "okay";
> +
> + port {
> + display_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> };
>
> &ldo4_ext {
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
@ 2018-10-25 15:56 ` Fabio Estevam
0 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2018-10-25 15:56 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Oct 25, 2018 at 12:11 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote:
>
> This change adds support for the AUO G101EVN010 lcdif panel for the
> mxsfb DRM driver.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
> ---
> arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
> index 11966d12af76..f6e6b2cf780b 100644
> --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
> +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
> @@ -24,6 +24,18 @@
> status = "okay";
> };
>
> + panel {
> + compatible = "auo,g101evn010", "simple-panel";
The "simple-panel" string could be dropped.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
> + power-supply = <&ldo4_ext>;
> + backlight = <&lcd_backlight>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&display_out>;
> + };
> + };
> + };
> +
> reg_usb_otg1_vbus: regulator-usb-otg1 {
> compatible = "regulator-fixed";
> regulator-name = "usb_otg1_vbus";
> @@ -112,6 +124,12 @@
> &pinctrl_lcdif_hvsync>;
> lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
> status = "okay";
> +
> + port {
> + display_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> };
>
> &ldo4_ext {
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
2018-10-25 15:09 ` Alex Gonzalez
(?)
@ 2018-10-25 15:57 ` Fabio Estevam
-1 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2018-10-25 15:57 UTC (permalink / raw)
To: Gonzalez, Alex
Cc: Thierry Reding, David Airlie, DRI mailing list, Shawn Guo,
Rob Herring, Mark Rutland, Sascha Hauer, Sascha Hauer,
Fabio Estevam, NXP Linux Team,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
On Thu, Oct 25, 2018 at 12:11 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote:
>
> Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch
> screen by default on Digi International's AUO/Goodix LCD accessory kit used
> with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
@ 2018-10-25 15:57 ` Fabio Estevam
0 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2018-10-25 15:57 UTC (permalink / raw)
To: Gonzalez, Alex
Cc: Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
David Airlie, linux-kernel, DRI mailing list, Rob Herring,
Thierry Reding, NXP Linux Team, Sascha Hauer, Fabio Estevam,
Shawn Guo,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
On Thu, Oct 25, 2018 at 12:11 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote:
>
> Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch
> screen by default on Digi International's AUO/Goodix LCD accessory kit used
> with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
@ 2018-10-25 15:57 ` Fabio Estevam
0 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2018-10-25 15:57 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Oct 25, 2018 at 12:11 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote:
>
> Select CONFIG_TOUCHSCREEN_GOODIX so that we can have functional touch
> screen by default on Digi International's AUO/Goodix LCD accessory kit used
> with the ConnectCore 6UL SBC Pro (ccimx6ulsbcpro) board.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
2018-10-25 15:09 ` Alex Gonzalez
(?)
@ 2018-10-25 15:57 ` Fabio Estevam
-1 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2018-10-25 15:57 UTC (permalink / raw)
To: Gonzalez, Alex
Cc: Thierry Reding, David Airlie, DRI mailing list, Shawn Guo,
Rob Herring, Mark Rutland, Sascha Hauer, Sascha Hauer,
Fabio Estevam, NXP Linux Team,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
On Thu, Oct 25, 2018 at 12:10 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote:
>
> The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is
> connected on the LVDS interface through an on-board LVDS transceiver.
>
> This change adds support for the touch interface.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
@ 2018-10-25 15:57 ` Fabio Estevam
0 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2018-10-25 15:57 UTC (permalink / raw)
To: Gonzalez, Alex
Cc: Thierry Reding, David Airlie, DRI mailing list, Shawn Guo,
Rob Herring, Mark Rutland, Sascha Hauer, Sascha Hauer,
Fabio Estevam, NXP Linux Team,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-kernel,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
On Thu, Oct 25, 2018 at 12:10 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote:
>
> The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is
> connected on the LVDS interface through an on-board LVDS transceiver.
>
> This change adds support for the touch interface.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
@ 2018-10-25 15:57 ` Fabio Estevam
0 siblings, 0 replies; 38+ messages in thread
From: Fabio Estevam @ 2018-10-25 15:57 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Oct 25, 2018 at 12:10 PM Alex Gonzalez <alex.gonzalez@digi.com> wrote:
>
> The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is
> connected on the LVDS interface through an on-board LVDS transceiver.
>
> This change adds support for the touch interface.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support
2018-10-25 15:09 ` Alex Gonzalez
(?)
@ 2018-10-30 23:05 ` Rob Herring
-1 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2018-10-30 23:05 UTC (permalink / raw)
To: Alex Gonzalez
Cc: thierry.reding, airlied, dri-devel, shawnguo, robh+dt,
mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
On Thu, 25 Oct 2018 17:09:30 +0200, Alex Gonzalez wrote:
> The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
> panel.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
> ---
> .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++
> drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
> 2 files changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support
@ 2018-10-30 23:05 ` Rob Herring
0 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2018-10-30 23:05 UTC (permalink / raw)
Cc: thierry.reding, airlied, dri-devel, shawnguo, robh+dt,
mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
On Thu, 25 Oct 2018 17:09:30 +0200, Alex Gonzalez wrote:
> The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
> panel.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
> ---
> .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++
> drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
> 2 files changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support
@ 2018-10-30 23:05 ` Rob Herring
0 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2018-10-30 23:05 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 25 Oct 2018 17:09:30 +0200, Alex Gonzalez wrote:
> The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
> panel.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
> ---
> .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++
> drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
> 2 files changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit
2018-10-25 15:09 ` Alex Gonzalez
(?)
@ 2018-11-04 8:54 ` Shawn Guo
-1 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2018-11-04 8:54 UTC (permalink / raw)
To: Alex Gonzalez
Cc: thierry.reding, airlied, dri-devel, robh+dt, mark.rutland,
s.hauer, kernel, fabio.estevam, linux-imx, devicetree,
linux-kernel, linux-arm-kernel
On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote:
> Alex Gonzalez (4):
> drm/panel: simple: Add AUO G101EVN010 panel support
> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
> ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
It looks good to me. Ping me when the patch #1 gets accepted and I
will apply the test then.
Shawn
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit
@ 2018-11-04 8:54 ` Shawn Guo
0 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2018-11-04 8:54 UTC (permalink / raw)
To: Alex Gonzalez
Cc: mark.rutland, devicetree, airlied, linux-kernel, dri-devel,
robh+dt, thierry.reding, linux-imx, kernel, fabio.estevam,
linux-arm-kernel
On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote:
> Alex Gonzalez (4):
> drm/panel: simple: Add AUO G101EVN010 panel support
> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
> ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
It looks good to me. Ping me when the patch #1 gets accepted and I
will apply the test then.
Shawn
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit
@ 2018-11-04 8:54 ` Shawn Guo
0 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2018-11-04 8:54 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote:
> Alex Gonzalez (4):
> drm/panel: simple: Add AUO G101EVN010 panel support
> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
> ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
It looks good to me. Ping me when the patch #1 gets accepted and I
will apply the test then.
Shawn
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support
2018-10-30 23:05 ` Rob Herring
(?)
(?)
@ 2018-12-03 9:24 ` Gonzalez, Alex
-1 siblings, 0 replies; 38+ messages in thread
From: Gonzalez, Alex @ 2018-12-03 9:24 UTC (permalink / raw)
To: Thierry Reding; +Cc: dri-devel
On Tue, Oct 30, 2018 at 11:05:19PM +0000, Rob Herring wrote:
>On Thu, 25 Oct 2018 17:09:30 +0200, Alex Gonzalez wrote:
>> The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
>> panel.
>>
>> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
>> ---
>> .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++
>> drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
>> 2 files changed, 39 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
>>
>
>Reviewed-by: Rob Herring <robh@kernel.org>
Ping?
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support
2018-10-25 15:09 ` Alex Gonzalez
@ 2018-12-03 16:08 ` Thierry Reding
-1 siblings, 0 replies; 38+ messages in thread
From: Thierry Reding @ 2018-12-03 16:08 UTC (permalink / raw)
To: Alex Gonzalez
Cc: airlied, dri-devel, shawnguo, robh+dt, mark.rutland, s.hauer,
kernel, fabio.estevam, linux-imx, devicetree, linux-kernel,
linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 895 bytes --]
On Thu, Oct 25, 2018 at 05:09:30PM +0200, Alex Gonzalez wrote:
> The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
> panel.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
> ---
> .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++
> drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
> 2 files changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
Two things to keep in mind for next time: please split up DT bindings
and driver changes into two separate patches (checkpatch.pl warns about
this) and keep entries in panel-simple sorted alphabetically.
I fixed the sorting myself and also added a .txt suffix to the DT
binding documentation for consistency with other files in that
directory.
Applied to drm-misc-next, thanks.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support
@ 2018-12-03 16:08 ` Thierry Reding
0 siblings, 0 replies; 38+ messages in thread
From: Thierry Reding @ 2018-12-03 16:08 UTC (permalink / raw)
To: Alex Gonzalez
Cc: mark.rutland, devicetree, airlied, s.hauer, linux-kernel,
dri-devel, robh+dt, linux-imx, kernel, fabio.estevam, shawnguo,
linux-arm-kernel
[-- Attachment #1.1: Type: text/plain, Size: 895 bytes --]
On Thu, Oct 25, 2018 at 05:09:30PM +0200, Alex Gonzalez wrote:
> The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
> panel.
>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
> ---
> .../bindings/display/panel/auo,g101evn010 | 12 ++++++++++
> drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++
> 2 files changed, 39 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/auo,g101evn010
Two things to keep in mind for next time: please split up DT bindings
and driver changes into two separate patches (checkpatch.pl warns about
this) and keep entries in panel-simple sorted alphabetically.
I fixed the sorting myself and also added a .txt suffix to the DT
binding documentation for consistency with other files in that
directory.
Applied to drm-misc-next, thanks.
Thierry
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit
2018-11-04 8:54 ` Shawn Guo
(?)
@ 2018-12-04 16:52 ` Gonzalez, Alex
-1 siblings, 0 replies; 38+ messages in thread
From: Gonzalez, Alex @ 2018-12-04 16:52 UTC (permalink / raw)
To: Shawn Guo; +Cc: linux-kernel, devicetree, linux-arm-kernel, dri-devel
On Sun, Nov 04, 2018 at 08:54:26AM +0000, Shawn Guo wrote:
>On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote:
>> Alex Gonzalez (4):
>> drm/panel: simple: Add AUO G101EVN010 panel support
>> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
>> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
>> ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
>
>It looks good to me. Ping me when the patch #1 gets accepted and I
>will apply the test then.
>
>Shawn
Hi Shawn,
Patch #1 is already applied to drm-misc-next (thanks to Thierry for fixing it
up for me)
Alex
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit
@ 2018-12-04 16:52 ` Gonzalez, Alex
0 siblings, 0 replies; 38+ messages in thread
From: Gonzalez, Alex @ 2018-12-04 16:52 UTC (permalink / raw)
To: Shawn Guo; +Cc: devicetree, dri-devel, linux-kernel, linux-arm-kernel
On Sun, Nov 04, 2018 at 08:54:26AM +0000, Shawn Guo wrote:
>On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote:
>> Alex Gonzalez (4):
>> drm/panel: simple: Add AUO G101EVN010 panel support
>> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
>> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
>> ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
>
>It looks good to me. Ping me when the patch #1 gets accepted and I
>will apply the test then.
>
>Shawn
Hi Shawn,
Patch #1 is already applied to drm-misc-next (thanks to Thierry for fixing it
up for me)
Alex
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit
@ 2018-12-04 16:52 ` Gonzalez, Alex
0 siblings, 0 replies; 38+ messages in thread
From: Gonzalez, Alex @ 2018-12-04 16:52 UTC (permalink / raw)
To: Shawn Guo; +Cc: devicetree, dri-devel, linux-kernel, linux-arm-kernel
On Sun, Nov 04, 2018 at 08:54:26AM +0000, Shawn Guo wrote:
>On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote:
>> Alex Gonzalez (4):
>> drm/panel: simple: Add AUO G101EVN010 panel support
>> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
>> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
>> ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
>
>It looks good to me. Ping me when the patch #1 gets accepted and I
>will apply the test then.
>
>Shawn
Hi Shawn,
Patch #1 is already applied to drm-misc-next (thanks to Thierry for fixing it
up for me)
Alex
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit
2018-10-25 15:09 ` Alex Gonzalez
@ 2018-12-05 0:40 ` Shawn Guo
-1 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2018-12-05 0:40 UTC (permalink / raw)
To: Alex Gonzalez
Cc: thierry.reding, airlied, dri-devel, robh+dt, mark.rutland,
s.hauer, kernel, fabio.estevam, linux-imx, devicetree,
linux-kernel, linux-arm-kernel
On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote:
> Alex Gonzalez (4):
> drm/panel: simple: Add AUO G101EVN010 panel support
> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
> ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
Applied #2 ~ #4, thanks.
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit
@ 2018-12-05 0:40 ` Shawn Guo
0 siblings, 0 replies; 38+ messages in thread
From: Shawn Guo @ 2018-12-05 0:40 UTC (permalink / raw)
To: Alex Gonzalez
Cc: mark.rutland, devicetree, airlied, s.hauer, linux-kernel,
dri-devel, robh+dt, thierry.reding, linux-imx, kernel,
fabio.estevam, linux-arm-kernel
On Thu, Oct 25, 2018 at 05:09:29PM +0200, Alex Gonzalez wrote:
> Alex Gonzalez (4):
> drm/panel: simple: Add AUO G101EVN010 panel support
> ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
> ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
> ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
Applied #2 ~ #4, thanks.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 38+ messages in thread
end of thread, other threads:[~2018-12-05 0:41 UTC | newest]
Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-25 15:09 [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit Alex Gonzalez
2018-10-25 15:09 ` Alex Gonzalez
2018-10-25 15:09 ` Alex Gonzalez
2018-10-25 15:09 ` [PATCH v1 1/4] drm/panel: simple: Add AUO G101EVN010 panel support Alex Gonzalez
2018-10-25 15:09 ` Alex Gonzalez
2018-10-25 15:09 ` Alex Gonzalez
2018-10-30 23:05 ` Rob Herring
2018-10-30 23:05 ` Rob Herring
2018-10-30 23:05 ` Rob Herring
2018-12-03 9:24 ` Gonzalez, Alex
2018-12-03 16:08 ` Thierry Reding
2018-12-03 16:08 ` Thierry Reding
2018-10-25 15:09 ` [PATCH v1 2/4] ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel Alex Gonzalez
2018-10-25 15:09 ` Alex Gonzalez
2018-10-25 15:09 ` Alex Gonzalez
2018-10-25 15:56 ` Fabio Estevam
2018-10-25 15:56 ` Fabio Estevam
2018-10-25 15:56 ` Fabio Estevam
2018-10-25 15:09 ` [PATCH v1 3/4] ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX Alex Gonzalez
2018-10-25 15:09 ` Alex Gonzalez
2018-10-25 15:09 ` Alex Gonzalez
2018-10-25 15:57 ` Fabio Estevam
2018-10-25 15:57 ` Fabio Estevam
2018-10-25 15:57 ` Fabio Estevam
2018-10-25 15:09 ` [PATCH v1 4/4] ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller Alex Gonzalez
2018-10-25 15:09 ` Alex Gonzalez
2018-10-25 15:09 ` Alex Gonzalez
2018-10-25 15:57 ` Fabio Estevam
2018-10-25 15:57 ` Fabio Estevam
2018-10-25 15:57 ` Fabio Estevam
2018-11-04 8:54 ` [PATCH v1 0/4] ARM: dts: ccimx6ulsbcpro: Add 10" AUO/Goodix LVDS panel accessory kit Shawn Guo
2018-11-04 8:54 ` Shawn Guo
2018-11-04 8:54 ` Shawn Guo
2018-12-04 16:52 ` Gonzalez, Alex
2018-12-04 16:52 ` Gonzalez, Alex
2018-12-04 16:52 ` Gonzalez, Alex
2018-12-05 0:40 ` Shawn Guo
2018-12-05 0:40 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.