* [PATCH 01/10 RESEND] mmc: spi: Move SSP register definitions into separate file
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-23 20:40 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Cc: Marek Vasut, Fabio Estevam, Shawn Guo, Mark Brown, Attila Kinali,
Chris Ball, Dong Aisheng, Linux ARM kernel
Move the definitions into separate file so separate SPI driver can be
implemented. The SSP controller in MXS can act both as a MMC host and
as a SPI host.
Based on previous attempt by:
Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
drivers/mmc/host/mxs-mmc.c | 87 ++--------------------------------
include/linux/spi/mxs-spi.h | 109 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 112 insertions(+), 84 deletions(-)
create mode 100644 include/linux/spi/mxs-spi.h
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index a51f930..26c95dc 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -45,87 +45,10 @@
#include <linux/pinctrl/consumer.h>
#include <linux/stmp_device.h>
#include <linux/mmc/mxs-mmc.h>
+#include <linux/spi/mxs-spi.h>
#define DRIVER_NAME "mxs-mmc"
-/* card detect polling timeout */
-#define MXS_MMC_DETECT_TIMEOUT (HZ/2)
-
-#define ssp_is_old(host) ((host)->devid == IMX23_MMC)
-
-/* SSP registers */
-#define HW_SSP_CTRL0 0x000
-#define BM_SSP_CTRL0_RUN (1 << 29)
-#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
-#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
-#define BM_SSP_CTRL0_READ (1 << 25)
-#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
-#define BP_SSP_CTRL0_BUS_WIDTH (22)
-#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
-#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
-#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
-#define BM_SSP_CTRL0_GET_RESP (1 << 17)
-#define BM_SSP_CTRL0_ENABLE (1 << 16)
-#define BP_SSP_CTRL0_XFER_COUNT (0)
-#define BM_SSP_CTRL0_XFER_COUNT (0xffff)
-#define HW_SSP_CMD0 0x010
-#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
-#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22)
-#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21)
-#define BM_SSP_CMD0_APPEND_8CYC (1 << 20)
-#define BP_SSP_CMD0_BLOCK_SIZE (16)
-#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16)
-#define BP_SSP_CMD0_BLOCK_COUNT (8)
-#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8)
-#define BP_SSP_CMD0_CMD (0)
-#define BM_SSP_CMD0_CMD (0xff)
-#define HW_SSP_CMD1 0x020
-#define HW_SSP_XFER_SIZE 0x030
-#define HW_SSP_BLOCK_SIZE 0x040
-#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT (4)
-#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
-#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE (0)
-#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE (0xf)
-#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
-#define BP_SSP_TIMING_TIMEOUT (16)
-#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
-#define BP_SSP_TIMING_CLOCK_DIVIDE (8)
-#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
-#define BP_SSP_TIMING_CLOCK_RATE (0)
-#define BM_SSP_TIMING_CLOCK_RATE (0xff)
-#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
-#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
-#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
-#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
-#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
-#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
-#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
-#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
-#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20)
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
-#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
-#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
-#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
-#define BM_SSP_CTRL1_POLARITY (1 << 9)
-#define BP_SSP_CTRL1_WORD_LENGTH (4)
-#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
-#define BP_SSP_CTRL1_SSP_MODE (0)
-#define BM_SSP_CTRL1_SSP_MODE (0xf)
-#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
-#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
-#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
-#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
-#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
-#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
-#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
-
-#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
-
#define MXS_MMC_IRQ_BITS (BM_SSP_CTRL1_SDIO_IRQ | \
BM_SSP_CTRL1_RESP_ERR_IRQ | \
BM_SSP_CTRL1_RESP_TIMEOUT_IRQ | \
@@ -135,12 +58,8 @@
BM_SSP_CTRL1_RECV_TIMEOUT_IRQ | \
BM_SSP_CTRL1_FIFO_OVERRUN_IRQ)
-#define SSP_PIO_NUM 3
-
-enum mxs_mmc_id {
- IMX23_MMC,
- IMX28_MMC,
-};
+/* card detect polling timeout */
+#define MXS_MMC_DETECT_TIMEOUT (HZ/2)
struct mxs_mmc_host {
struct mmc_host *mmc;
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
new file mode 100644
index 0000000..b7ccd57
--- /dev/null
+++ b/include/linux/spi/mxs-spi.h
@@ -0,0 +1,109 @@
+/*
+ * include/linux/spi/mxs-spi.h
+ *
+ * Freescale i.MX233/i.MX28 SPI controller register definition
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __LINUX_SPI_MXS_SPI_H__
+#define __LINUX_SPI_MXS_SPI_H__
+
+#define ssp_is_old(host) ((host)->devid == IMX23_MMC)
+
+/* SSP registers */
+#define HW_SSP_CTRL0 0x000
+#define BM_SSP_CTRL0_RUN (1 << 29)
+#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
+#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
+#define BM_SSP_CTRL0_READ (1 << 25)
+#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
+#define BP_SSP_CTRL0_BUS_WIDTH 22
+#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
+#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
+#define BM_SSP_CTRL0_GET_RESP (1 << 17)
+#define BM_SSP_CTRL0_ENABLE (1 << 16)
+#define BP_SSP_CTRL0_XFER_COUNT 0
+#define BM_SSP_CTRL0_XFER_COUNT 0xffff
+#define HW_SSP_CMD0 0x010
+#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
+#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22)
+#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21)
+#define BM_SSP_CMD0_APPEND_8CYC (1 << 20)
+#define BP_SSP_CMD0_BLOCK_SIZE 16
+#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16)
+#define BP_SSP_CMD0_BLOCK_COUNT 8
+#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8)
+#define BP_SSP_CMD0_CMD 0
+#define BM_SSP_CMD0_CMD 0xff
+#define HW_SSP_CMD1 0x020
+#define HW_SSP_XFER_SIZE 0x030
+#define HW_SSP_BLOCK_SIZE 0x040
+#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT 4
+#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
+#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE 0
+#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE 0xf
+#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
+#define BP_SSP_TIMING_TIMEOUT 16
+#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
+#define BP_SSP_TIMING_CLOCK_DIVIDE 8
+#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
+#define BP_SSP_TIMING_CLOCK_RATE 0
+#define BM_SSP_TIMING_CLOCK_RATE 0xff
+#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
+#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
+#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
+#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
+#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20)
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
+#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
+#define BM_SSP_CTRL1_POLARITY (1 << 9)
+#define BP_SSP_CTRL1_WORD_LENGTH 4
+#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
+#define BP_SSP_CTRL1_SSP_MODE 0
+#define BM_SSP_CTRL1_SSP_MODE 0xf
+#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
+#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
+#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
+#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
+#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
+#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
+#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
+
+#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
+
+#define SSP_PIO_NUM 3
+
+enum mxs_mmc_id {
+ IMX23_MMC,
+ IMX28_MMC,
+};
+
+#endif /* __LINUX_SPI_MXS_SPI_H__ */
--
1.7.10.4
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 01/10 RESEND] mmc: spi: Move SSP register definitions into separate file
@ 2012-07-23 20:40 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: linux-arm-kernel
Move the definitions into separate file so separate SPI driver can be
implemented. The SSP controller in MXS can act both as a MMC host and
as a SPI host.
Based on previous attempt by:
Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
drivers/mmc/host/mxs-mmc.c | 87 ++--------------------------------
include/linux/spi/mxs-spi.h | 109 +++++++++++++++++++++++++++++++++++++++++++
2 files changed, 112 insertions(+), 84 deletions(-)
create mode 100644 include/linux/spi/mxs-spi.h
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index a51f930..26c95dc 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -45,87 +45,10 @@
#include <linux/pinctrl/consumer.h>
#include <linux/stmp_device.h>
#include <linux/mmc/mxs-mmc.h>
+#include <linux/spi/mxs-spi.h>
#define DRIVER_NAME "mxs-mmc"
-/* card detect polling timeout */
-#define MXS_MMC_DETECT_TIMEOUT (HZ/2)
-
-#define ssp_is_old(host) ((host)->devid == IMX23_MMC)
-
-/* SSP registers */
-#define HW_SSP_CTRL0 0x000
-#define BM_SSP_CTRL0_RUN (1 << 29)
-#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
-#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
-#define BM_SSP_CTRL0_READ (1 << 25)
-#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
-#define BP_SSP_CTRL0_BUS_WIDTH (22)
-#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
-#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
-#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
-#define BM_SSP_CTRL0_GET_RESP (1 << 17)
-#define BM_SSP_CTRL0_ENABLE (1 << 16)
-#define BP_SSP_CTRL0_XFER_COUNT (0)
-#define BM_SSP_CTRL0_XFER_COUNT (0xffff)
-#define HW_SSP_CMD0 0x010
-#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
-#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22)
-#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21)
-#define BM_SSP_CMD0_APPEND_8CYC (1 << 20)
-#define BP_SSP_CMD0_BLOCK_SIZE (16)
-#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16)
-#define BP_SSP_CMD0_BLOCK_COUNT (8)
-#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8)
-#define BP_SSP_CMD0_CMD (0)
-#define BM_SSP_CMD0_CMD (0xff)
-#define HW_SSP_CMD1 0x020
-#define HW_SSP_XFER_SIZE 0x030
-#define HW_SSP_BLOCK_SIZE 0x040
-#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT (4)
-#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
-#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE (0)
-#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE (0xf)
-#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
-#define BP_SSP_TIMING_TIMEOUT (16)
-#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
-#define BP_SSP_TIMING_CLOCK_DIVIDE (8)
-#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
-#define BP_SSP_TIMING_CLOCK_RATE (0)
-#define BM_SSP_TIMING_CLOCK_RATE (0xff)
-#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
-#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
-#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
-#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
-#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
-#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
-#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
-#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
-#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
-#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
-#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20)
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
-#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
-#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
-#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
-#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
-#define BM_SSP_CTRL1_POLARITY (1 << 9)
-#define BP_SSP_CTRL1_WORD_LENGTH (4)
-#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
-#define BP_SSP_CTRL1_SSP_MODE (0)
-#define BM_SSP_CTRL1_SSP_MODE (0xf)
-#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
-#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
-#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
-#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
-#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
-#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
-#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
-
-#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
-
#define MXS_MMC_IRQ_BITS (BM_SSP_CTRL1_SDIO_IRQ | \
BM_SSP_CTRL1_RESP_ERR_IRQ | \
BM_SSP_CTRL1_RESP_TIMEOUT_IRQ | \
@@ -135,12 +58,8 @@
BM_SSP_CTRL1_RECV_TIMEOUT_IRQ | \
BM_SSP_CTRL1_FIFO_OVERRUN_IRQ)
-#define SSP_PIO_NUM 3
-
-enum mxs_mmc_id {
- IMX23_MMC,
- IMX28_MMC,
-};
+/* card detect polling timeout */
+#define MXS_MMC_DETECT_TIMEOUT (HZ/2)
struct mxs_mmc_host {
struct mmc_host *mmc;
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
new file mode 100644
index 0000000..b7ccd57
--- /dev/null
+++ b/include/linux/spi/mxs-spi.h
@@ -0,0 +1,109 @@
+/*
+ * include/linux/spi/mxs-spi.h
+ *
+ * Freescale i.MX233/i.MX28 SPI controller register definition
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __LINUX_SPI_MXS_SPI_H__
+#define __LINUX_SPI_MXS_SPI_H__
+
+#define ssp_is_old(host) ((host)->devid == IMX23_MMC)
+
+/* SSP registers */
+#define HW_SSP_CTRL0 0x000
+#define BM_SSP_CTRL0_RUN (1 << 29)
+#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
+#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
+#define BM_SSP_CTRL0_READ (1 << 25)
+#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
+#define BP_SSP_CTRL0_BUS_WIDTH 22
+#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
+#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
+#define BM_SSP_CTRL0_GET_RESP (1 << 17)
+#define BM_SSP_CTRL0_ENABLE (1 << 16)
+#define BP_SSP_CTRL0_XFER_COUNT 0
+#define BM_SSP_CTRL0_XFER_COUNT 0xffff
+#define HW_SSP_CMD0 0x010
+#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
+#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22)
+#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21)
+#define BM_SSP_CMD0_APPEND_8CYC (1 << 20)
+#define BP_SSP_CMD0_BLOCK_SIZE 16
+#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16)
+#define BP_SSP_CMD0_BLOCK_COUNT 8
+#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8)
+#define BP_SSP_CMD0_CMD 0
+#define BM_SSP_CMD0_CMD 0xff
+#define HW_SSP_CMD1 0x020
+#define HW_SSP_XFER_SIZE 0x030
+#define HW_SSP_BLOCK_SIZE 0x040
+#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT 4
+#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
+#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE 0
+#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE 0xf
+#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
+#define BP_SSP_TIMING_TIMEOUT 16
+#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
+#define BP_SSP_TIMING_CLOCK_DIVIDE 8
+#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
+#define BP_SSP_TIMING_CLOCK_RATE 0
+#define BM_SSP_TIMING_CLOCK_RATE 0xff
+#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
+#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
+#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
+#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
+#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20)
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
+#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
+#define BM_SSP_CTRL1_POLARITY (1 << 9)
+#define BP_SSP_CTRL1_WORD_LENGTH 4
+#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
+#define BP_SSP_CTRL1_SSP_MODE 0
+#define BM_SSP_CTRL1_SSP_MODE 0xf
+#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
+#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
+#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
+#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
+#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
+#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
+#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
+
+#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
+
+#define SSP_PIO_NUM 3
+
+enum mxs_mmc_id {
+ IMX23_MMC,
+ IMX28_MMC,
+};
+
+#endif /* __LINUX_SPI_MXS_SPI_H__ */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 02/10 RESEND] mmc: spi: Rename IMX2[38]_MMC to IMX2[38]_SSP
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-23 20:40 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Cc: Marek Vasut, Fabio Estevam, Shawn Guo, Mark Brown, Attila Kinali,
Chris Ball, Dong Aisheng, Linux ARM kernel
Since the SSP controller can act as both SPI and MMC host,
renaming the enum to properly reflect the naming seems
appropriate.
Based on previous attempt by:
Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
drivers/mmc/host/mxs-mmc.c | 18 +++++++++---------
include/linux/spi/mxs-spi.h | 8 ++++----
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 26c95dc..e80c2b6 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -78,7 +78,7 @@ struct mxs_mmc_host {
enum dma_transfer_direction slave_dirn;
u32 ssp_pio_words[SSP_PIO_NUM];
- enum mxs_mmc_id devid;
+ enum mxs_ssp_id devid;
unsigned char bus_width;
spinlock_t lock;
int sdio_irq_en;
@@ -601,22 +601,22 @@ static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param)
return true;
}
-static struct platform_device_id mxs_mmc_ids[] = {
+static struct platform_device_id mxs_ssp_ids[] = {
{
.name = "imx23-mmc",
- .driver_data = IMX23_MMC,
+ .driver_data = IMX23_SSP,
}, {
.name = "imx28-mmc",
- .driver_data = IMX28_MMC,
+ .driver_data = IMX28_SSP,
}, {
/* sentinel */
}
};
-MODULE_DEVICE_TABLE(platform, mxs_mmc_ids);
+MODULE_DEVICE_TABLE(platform, mxs_ssp_ids);
static const struct of_device_id mxs_mmc_dt_ids[] = {
- { .compatible = "fsl,imx23-mmc", .data = (void *) IMX23_MMC, },
- { .compatible = "fsl,imx28-mmc", .data = (void *) IMX28_MMC, },
+ { .compatible = "fsl,imx23-mmc", .data = (void *) IMX23_SSP, },
+ { .compatible = "fsl,imx28-mmc", .data = (void *) IMX28_SSP, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_mmc_dt_ids);
@@ -655,7 +655,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
}
if (np) {
- host->devid = (enum mxs_mmc_id) of_id->data;
+ host->devid = (enum mxs_ssp_id) of_id->data;
/*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helpers get in.
@@ -829,7 +829,7 @@ static const struct dev_pm_ops mxs_mmc_pm_ops = {
static struct platform_driver mxs_mmc_driver = {
.probe = mxs_mmc_probe,
.remove = mxs_mmc_remove,
- .id_table = mxs_mmc_ids,
+ .id_table = mxs_ssp_ids,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index b7ccd57..c08aef5 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -24,7 +24,7 @@
#ifndef __LINUX_SPI_MXS_SPI_H__
#define __LINUX_SPI_MXS_SPI_H__
-#define ssp_is_old(host) ((host)->devid == IMX23_MMC)
+#define ssp_is_old(host) ((host)->devid == IMX23_SSP)
/* SSP registers */
#define HW_SSP_CTRL0 0x000
@@ -101,9 +101,9 @@
#define SSP_PIO_NUM 3
-enum mxs_mmc_id {
- IMX23_MMC,
- IMX28_MMC,
+enum mxs_ssp_id {
+ IMX23_SSP,
+ IMX28_SSP,
};
#endif /* __LINUX_SPI_MXS_SPI_H__ */
--
1.7.10.4
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 02/10 RESEND] mmc: spi: Rename IMX2[38]_MMC to IMX2[38]_SSP
@ 2012-07-23 20:40 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: linux-arm-kernel
Since the SSP controller can act as both SPI and MMC host,
renaming the enum to properly reflect the naming seems
appropriate.
Based on previous attempt by:
Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
drivers/mmc/host/mxs-mmc.c | 18 +++++++++---------
include/linux/spi/mxs-spi.h | 8 ++++----
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 26c95dc..e80c2b6 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -78,7 +78,7 @@ struct mxs_mmc_host {
enum dma_transfer_direction slave_dirn;
u32 ssp_pio_words[SSP_PIO_NUM];
- enum mxs_mmc_id devid;
+ enum mxs_ssp_id devid;
unsigned char bus_width;
spinlock_t lock;
int sdio_irq_en;
@@ -601,22 +601,22 @@ static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param)
return true;
}
-static struct platform_device_id mxs_mmc_ids[] = {
+static struct platform_device_id mxs_ssp_ids[] = {
{
.name = "imx23-mmc",
- .driver_data = IMX23_MMC,
+ .driver_data = IMX23_SSP,
}, {
.name = "imx28-mmc",
- .driver_data = IMX28_MMC,
+ .driver_data = IMX28_SSP,
}, {
/* sentinel */
}
};
-MODULE_DEVICE_TABLE(platform, mxs_mmc_ids);
+MODULE_DEVICE_TABLE(platform, mxs_ssp_ids);
static const struct of_device_id mxs_mmc_dt_ids[] = {
- { .compatible = "fsl,imx23-mmc", .data = (void *) IMX23_MMC, },
- { .compatible = "fsl,imx28-mmc", .data = (void *) IMX28_MMC, },
+ { .compatible = "fsl,imx23-mmc", .data = (void *) IMX23_SSP, },
+ { .compatible = "fsl,imx28-mmc", .data = (void *) IMX28_SSP, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_mmc_dt_ids);
@@ -655,7 +655,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
}
if (np) {
- host->devid = (enum mxs_mmc_id) of_id->data;
+ host->devid = (enum mxs_ssp_id) of_id->data;
/*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helpers get in.
@@ -829,7 +829,7 @@ static const struct dev_pm_ops mxs_mmc_pm_ops = {
static struct platform_driver mxs_mmc_driver = {
.probe = mxs_mmc_probe,
.remove = mxs_mmc_remove,
- .id_table = mxs_mmc_ids,
+ .id_table = mxs_ssp_ids,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index b7ccd57..c08aef5 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -24,7 +24,7 @@
#ifndef __LINUX_SPI_MXS_SPI_H__
#define __LINUX_SPI_MXS_SPI_H__
-#define ssp_is_old(host) ((host)->devid == IMX23_MMC)
+#define ssp_is_old(host) ((host)->devid == IMX23_SSP)
/* SSP registers */
#define HW_SSP_CTRL0 0x000
@@ -101,9 +101,9 @@
#define SSP_PIO_NUM 3
-enum mxs_mmc_id {
- IMX23_MMC,
- IMX28_MMC,
+enum mxs_ssp_id {
+ IMX23_SSP,
+ IMX28_SSP,
};
#endif /* __LINUX_SPI_MXS_SPI_H__ */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 03/10 V2] mmc: spi: Add necessary bits into mxs-spi.h
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-23 20:40 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Cc: Marek Vasut, Fabio Estevam, Shawn Guo, Mark Brown, Attila Kinali,
Chris Ball, Dong Aisheng, Linux ARM kernel
Add missing register bits and registers into mxs-spi.h .
These will be used by the SPI driver.
Based on previous attempt by:
Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
include/linux/spi/mxs-spi.h | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
V2: Location of HW_SSP_DATA register differs on MX233 and MX28,
handle accordingly. (Thanks to Attila Kinali for finding this).
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index c08aef5..7dfa1d7 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -30,12 +30,14 @@
#define HW_SSP_CTRL0 0x000
#define BM_SSP_CTRL0_RUN (1 << 29)
#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
+#define BM_SSP_CTRL0_LOCK_CS (1 << 27)
#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
#define BM_SSP_CTRL0_READ (1 << 25)
#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
#define BP_SSP_CTRL0_BUS_WIDTH 22
#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
+#define BM_SSP_CTRL0_WAIT_FOR_CMD (1 << 20)
#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
#define BM_SSP_CTRL0_GET_RESP (1 << 17)
#define BM_SSP_CTRL0_ENABLE (1 << 16)
@@ -64,8 +66,12 @@
#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
#define BP_SSP_TIMING_CLOCK_DIVIDE 8
#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
+#define BF_SSP_TIMING_CLOCK_DIVIDE(v) \
+ (((v) << 8) & BM_SSP_TIMING_CLOCK_DIVIDE)
#define BP_SSP_TIMING_CLOCK_RATE 0
#define BM_SSP_TIMING_CLOCK_RATE 0xff
+#define BF_SSP_TIMING_CLOCK_RATE(v) \
+ (((v) << 0) & BM_SSP_TIMING_CLOCK_RATE)
#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
@@ -84,11 +90,26 @@
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
+#define BM_SSP_CTRL1_PHASE (1 << 10)
#define BM_SSP_CTRL1_POLARITY (1 << 9)
#define BP_SSP_CTRL1_WORD_LENGTH 4
#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
+#define BF_SSP_CTRL1_WORD_LENGTH(v) \
+ (((v) << 4) & BM_SSP_CTRL1_WORD_LENGTH)
+#define BV_SSP_CTRL1_WORD_LENGTH__FOUR_BITS 0x3
+#define BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS 0x7
+#define BV_SSP_CTRL1_WORD_LENGTH__SIXTEEN_BITS 0xF
#define BP_SSP_CTRL1_SSP_MODE 0
#define BM_SSP_CTRL1_SSP_MODE 0xf
+#define BF_SSP_CTRL1_SSP_MODE(v) \
+ (((v) << 0) & BM_SSP_CTRL1_SSP_MODE)
+#define BV_SSP_CTRL1_SSP_MODE__SPI 0x0
+#define BV_SSP_CTRL1_SSP_MODE__SSI 0x1
+#define BV_SSP_CTRL1_SSP_MODE__SD_MMC 0x3
+#define BV_SSP_CTRL1_SSP_MODE__MS 0x4
+
+#define HW_SSP_DATA(h) (ssp_is_old(h) ? 0x070 : 0x090)
+
#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
@@ -96,6 +117,7 @@
#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
+#define BM_SSP_STATUS_FIFO_EMPTY (1 << 5)
#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
--
1.7.10.4
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 03/10 V2] mmc: spi: Add necessary bits into mxs-spi.h
@ 2012-07-23 20:40 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: linux-arm-kernel
Add missing register bits and registers into mxs-spi.h .
These will be used by the SPI driver.
Based on previous attempt by:
Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
include/linux/spi/mxs-spi.h | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
V2: Location of HW_SSP_DATA register differs on MX233 and MX28,
handle accordingly. (Thanks to Attila Kinali for finding this).
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index c08aef5..7dfa1d7 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -30,12 +30,14 @@
#define HW_SSP_CTRL0 0x000
#define BM_SSP_CTRL0_RUN (1 << 29)
#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
+#define BM_SSP_CTRL0_LOCK_CS (1 << 27)
#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
#define BM_SSP_CTRL0_READ (1 << 25)
#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
#define BP_SSP_CTRL0_BUS_WIDTH 22
#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
+#define BM_SSP_CTRL0_WAIT_FOR_CMD (1 << 20)
#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
#define BM_SSP_CTRL0_GET_RESP (1 << 17)
#define BM_SSP_CTRL0_ENABLE (1 << 16)
@@ -64,8 +66,12 @@
#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
#define BP_SSP_TIMING_CLOCK_DIVIDE 8
#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
+#define BF_SSP_TIMING_CLOCK_DIVIDE(v) \
+ (((v) << 8) & BM_SSP_TIMING_CLOCK_DIVIDE)
#define BP_SSP_TIMING_CLOCK_RATE 0
#define BM_SSP_TIMING_CLOCK_RATE 0xff
+#define BF_SSP_TIMING_CLOCK_RATE(v) \
+ (((v) << 0) & BM_SSP_TIMING_CLOCK_RATE)
#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
@@ -84,11 +90,26 @@
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
+#define BM_SSP_CTRL1_PHASE (1 << 10)
#define BM_SSP_CTRL1_POLARITY (1 << 9)
#define BP_SSP_CTRL1_WORD_LENGTH 4
#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
+#define BF_SSP_CTRL1_WORD_LENGTH(v) \
+ (((v) << 4) & BM_SSP_CTRL1_WORD_LENGTH)
+#define BV_SSP_CTRL1_WORD_LENGTH__FOUR_BITS 0x3
+#define BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS 0x7
+#define BV_SSP_CTRL1_WORD_LENGTH__SIXTEEN_BITS 0xF
#define BP_SSP_CTRL1_SSP_MODE 0
#define BM_SSP_CTRL1_SSP_MODE 0xf
+#define BF_SSP_CTRL1_SSP_MODE(v) \
+ (((v) << 0) & BM_SSP_CTRL1_SSP_MODE)
+#define BV_SSP_CTRL1_SSP_MODE__SPI 0x0
+#define BV_SSP_CTRL1_SSP_MODE__SSI 0x1
+#define BV_SSP_CTRL1_SSP_MODE__SD_MMC 0x3
+#define BV_SSP_CTRL1_SSP_MODE__MS 0x4
+
+#define HW_SSP_DATA(h) (ssp_is_old(h) ? 0x070 : 0x090)
+
#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
@@ -96,6 +117,7 @@
#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
+#define BM_SSP_STATUS_FIFO_EMPTY (1 << 5)
#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 04/10 RESEND] mmc: spi: Pull out parts shared between MMC and SPI
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-23 20:40 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Cc: Marek Vasut, Fabio Estevam, Shawn Guo, Mark Brown, Attila Kinali,
Chris Ball, Dong Aisheng, Linux ARM kernel
Abstract out the common part of private data shared between MMC
and SPI. These shall later allow to use common clock configuration
function.
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
drivers/mmc/host/mxs-mmc.c | 107 ++++++++++++++++++++++++-------------------
include/linux/spi/mxs-spi.h | 8 ++++
2 files changed, 67 insertions(+), 48 deletions(-)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index e80c2b6..7b85e03 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -62,23 +62,20 @@
#define MXS_MMC_DETECT_TIMEOUT (HZ/2)
struct mxs_mmc_host {
+ struct mxs_ssp ssp;
+
struct mmc_host *mmc;
struct mmc_request *mrq;
struct mmc_command *cmd;
struct mmc_data *data;
- void __iomem *base;
int dma_channel;
- struct clk *clk;
- unsigned int clk_rate;
-
struct dma_chan *dmach;
struct mxs_dma_data dma_data;
unsigned int dma_dir;
enum dma_transfer_direction slave_dirn;
u32 ssp_pio_words[SSP_PIO_NUM];
- enum mxs_ssp_id devid;
unsigned char bus_width;
spinlock_t lock;
int sdio_irq_en;
@@ -105,16 +102,18 @@ static int mxs_mmc_get_ro(struct mmc_host *mmc)
static int mxs_mmc_get_cd(struct mmc_host *mmc)
{
struct mxs_mmc_host *host = mmc_priv(mmc);
+ struct mxs_ssp *ssp = &host->ssp;
- return !(readl(host->base + HW_SSP_STATUS(host)) &
+ return !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
BM_SSP_STATUS_CARD_DETECT);
}
static void mxs_mmc_reset(struct mxs_mmc_host *host)
{
+ struct mxs_ssp *ssp = &host->ssp;
u32 ctrl0, ctrl1;
- stmp_reset_block(host->base);
+ stmp_reset_block(ssp->base);
ctrl0 = BM_SSP_CTRL0_IGNORE_CRC;
ctrl1 = BF_SSP(0x3, CTRL1_SSP_MODE) |
@@ -130,15 +129,15 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host)
writel(BF_SSP(0xffff, TIMING_TIMEOUT) |
BF_SSP(2, TIMING_CLOCK_DIVIDE) |
BF_SSP(0, TIMING_CLOCK_RATE),
- host->base + HW_SSP_TIMING(host));
+ ssp->base + HW_SSP_TIMING(ssp));
if (host->sdio_irq_en) {
ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
ctrl1 |= BM_SSP_CTRL1_SDIO_IRQ_EN;
}
- writel(ctrl0, host->base + HW_SSP_CTRL0);
- writel(ctrl1, host->base + HW_SSP_CTRL1(host));
+ writel(ctrl0, ssp->base + HW_SSP_CTRL0);
+ writel(ctrl1, ssp->base + HW_SSP_CTRL1(ssp));
}
static void mxs_mmc_start_cmd(struct mxs_mmc_host *host,
@@ -149,15 +148,16 @@ static void mxs_mmc_request_done(struct mxs_mmc_host *host)
struct mmc_command *cmd = host->cmd;
struct mmc_data *data = host->data;
struct mmc_request *mrq = host->mrq;
+ struct mxs_ssp *ssp = &host->ssp;
if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) {
if (mmc_resp_type(cmd) & MMC_RSP_136) {
- cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0(host));
- cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1(host));
- cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2(host));
- cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3(host));
+ cmd->resp[3] = readl(ssp->base + HW_SSP_SDRESP0(ssp));
+ cmd->resp[2] = readl(ssp->base + HW_SSP_SDRESP1(ssp));
+ cmd->resp[1] = readl(ssp->base + HW_SSP_SDRESP2(ssp));
+ cmd->resp[0] = readl(ssp->base + HW_SSP_SDRESP3(ssp));
} else {
- cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0(host));
+ cmd->resp[0] = readl(ssp->base + HW_SSP_SDRESP0(ssp));
}
}
@@ -196,13 +196,14 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
struct mxs_mmc_host *host = dev_id;
struct mmc_command *cmd = host->cmd;
struct mmc_data *data = host->data;
+ struct mxs_ssp *ssp = &host->ssp;
u32 stat;
spin_lock(&host->lock);
- stat = readl(host->base + HW_SSP_CTRL1(host));
+ stat = readl(ssp->base + HW_SSP_CTRL1(ssp));
writel(stat & MXS_MMC_IRQ_BITS,
- host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
+ ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_CLR);
if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
mmc_signal_sdio_irq(host->mmc);
@@ -366,6 +367,8 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
unsigned int data_size = 0, log2_blksz;
unsigned int blocks = data->blocks;
+ struct mxs_ssp *ssp = &host->ssp;
+
u32 ignore_crc, get_resp, long_resp, read;
u32 ctrl0, cmd0, cmd1, val;
@@ -408,15 +411,15 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
blocks = 1;
/* xfer count, block size and count need to be set differently */
- if (ssp_is_old(host)) {
+ if (ssp_is_old(ssp)) {
ctrl0 |= BF_SSP(data_size, CTRL0_XFER_COUNT);
cmd0 |= BF_SSP(log2_blksz, CMD0_BLOCK_SIZE) |
BF_SSP(blocks - 1, CMD0_BLOCK_COUNT);
} else {
- writel(data_size, host->base + HW_SSP_XFER_SIZE);
+ writel(data_size, ssp->base + HW_SSP_XFER_SIZE);
writel(BF_SSP(log2_blksz, BLOCK_SIZE_BLOCK_SIZE) |
BF_SSP(blocks - 1, BLOCK_SIZE_BLOCK_COUNT),
- host->base + HW_SSP_BLOCK_SIZE);
+ ssp->base + HW_SSP_BLOCK_SIZE);
}
if ((cmd->opcode == MMC_STOP_TRANSMISSION) ||
@@ -431,11 +434,11 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
}
/* set the timeout count */
- timeout = mxs_ns_to_ssp_ticks(host->clk_rate, data->timeout_ns);
- val = readl(host->base + HW_SSP_TIMING(host));
+ timeout = mxs_ns_to_ssp_ticks(ssp->clk_rate, data->timeout_ns);
+ val = readl(ssp->base + HW_SSP_TIMING(ssp));
val &= ~(BM_SSP_TIMING_TIMEOUT);
val |= BF_SSP(timeout, TIMING_TIMEOUT);
- writel(val, host->base + HW_SSP_TIMING(host));
+ writel(val, ssp->base + HW_SSP_TIMING(ssp));
/* pio */
host->ssp_pio_words[0] = ctrl0;
@@ -500,11 +503,12 @@ static void mxs_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate)
{
+ struct mxs_ssp *ssp = &host->ssp;
unsigned int ssp_clk, ssp_sck;
u32 clock_divide, clock_rate;
u32 val;
- ssp_clk = clk_get_rate(host->clk);
+ ssp_clk = clk_get_rate(ssp->clk);
for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
@@ -521,13 +525,13 @@ static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate)
ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
- val = readl(host->base + HW_SSP_TIMING(host));
+ val = readl(ssp->base + HW_SSP_TIMING(ssp));
val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
- writel(val, host->base + HW_SSP_TIMING(host));
+ writel(val, ssp->base + HW_SSP_TIMING(ssp));
- host->clk_rate = ssp_sck;
+ ssp->clk_rate = ssp_sck;
dev_dbg(mmc_dev(host->mmc),
"%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
@@ -552,6 +556,7 @@ static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
{
struct mxs_mmc_host *host = mmc_priv(mmc);
+ struct mxs_ssp *ssp = &host->ssp;
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
@@ -560,19 +565,19 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
if (enable) {
writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
- host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
- host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET);
+ ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_SET);
- if (readl(host->base + HW_SSP_STATUS(host)) &
+ if (readl(ssp->base + HW_SSP_STATUS(ssp)) &
BM_SSP_STATUS_SDIO_IRQ)
mmc_signal_sdio_irq(host->mmc);
} else {
writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
- host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
- host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
+ ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_CLR);
}
spin_unlock_irqrestore(&host->lock, flags);
@@ -635,6 +640,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
dma_cap_mask_t mask;
struct regulator *reg_vmmc;
enum of_gpio_flags flags;
+ struct mxs_ssp *ssp;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -648,14 +654,16 @@ static int mxs_mmc_probe(struct platform_device *pdev)
return -ENOMEM;
host = mmc_priv(mmc);
- host->base = devm_request_and_ioremap(&pdev->dev, iores);
- if (!host->base) {
+ ssp = &host->ssp;
+ ssp->dev = &pdev->dev;
+ ssp->base = devm_request_and_ioremap(&pdev->dev, iores);
+ if (!ssp->base) {
ret = -EADDRNOTAVAIL;
goto out_mmc_free;
}
if (np) {
- host->devid = (enum mxs_ssp_id) of_id->data;
+ ssp->devid = (enum mxs_ssp_id) of_id->data;
/*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helpers get in.
@@ -668,7 +676,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
goto out_mmc_free;
}
} else {
- host->devid = pdev->id_entry->driver_data;
+ ssp->devid = pdev->id_entry->driver_data;
host->dma_channel = dmares->start;
}
@@ -691,12 +699,12 @@ static int mxs_mmc_probe(struct platform_device *pdev)
goto out_mmc_free;
}
- host->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(host->clk)) {
- ret = PTR_ERR(host->clk);
+ ssp->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ssp->clk)) {
+ ret = PTR_ERR(ssp->clk);
goto out_mmc_free;
}
- clk_prepare_enable(host->clk);
+ clk_prepare_enable(ssp->clk);
mxs_mmc_reset(host);
@@ -741,8 +749,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
mmc->max_segs = 52;
mmc->max_blk_size = 1 << 0xf;
- mmc->max_blk_count = (ssp_is_old(host)) ? 0xff : 0xffffff;
- mmc->max_req_size = (ssp_is_old(host)) ? 0xffff : 0xffffffff;
+ mmc->max_blk_count = (ssp_is_old(ssp)) ? 0xff : 0xffffff;
+ mmc->max_req_size = (ssp_is_old(ssp)) ? 0xffff : 0xffffffff;
mmc->max_seg_size = dma_get_max_seg_size(host->dmach->device->dev);
platform_set_drvdata(pdev, mmc);
@@ -766,8 +774,8 @@ out_free_dma:
if (host->dmach)
dma_release_channel(host->dmach);
out_clk_put:
- clk_disable_unprepare(host->clk);
- clk_put(host->clk);
+ clk_disable_unprepare(ssp->clk);
+ clk_put(ssp->clk);
out_mmc_free:
mmc_free_host(mmc);
return ret;
@@ -777,6 +785,7 @@ static int mxs_mmc_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct mxs_mmc_host *host = mmc_priv(mmc);
+ struct mxs_ssp *ssp = &host->ssp;
mmc_remove_host(mmc);
@@ -785,8 +794,8 @@ static int mxs_mmc_remove(struct platform_device *pdev)
if (host->dmach)
dma_release_channel(host->dmach);
- clk_disable_unprepare(host->clk);
- clk_put(host->clk);
+ clk_disable_unprepare(ssp->clk);
+ clk_put(ssp->clk);
mmc_free_host(mmc);
@@ -798,11 +807,12 @@ static int mxs_mmc_suspend(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
struct mxs_mmc_host *host = mmc_priv(mmc);
+ struct mxs_ssp *ssp = &host->ssp;
int ret = 0;
ret = mmc_suspend_host(mmc);
- clk_disable_unprepare(host->clk);
+ clk_disable_unprepare(ssp->clk);
return ret;
}
@@ -811,9 +821,10 @@ static int mxs_mmc_resume(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
struct mxs_mmc_host *host = mmc_priv(mmc);
+ struct mxs_ssp *ssp = &host->ssp;
int ret = 0;
- clk_prepare_enable(host->clk);
+ clk_prepare_enable(ssp->clk);
ret = mmc_resume_host(mmc);
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index 7dfa1d7..475f69f 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -128,4 +128,12 @@ enum mxs_ssp_id {
IMX28_SSP,
};
+struct mxs_ssp {
+ struct device *dev;
+ void __iomem *base;
+ struct clk *clk;
+ unsigned int clk_rate;
+ enum mxs_ssp_id devid;
+};
+
#endif /* __LINUX_SPI_MXS_SPI_H__ */
--
1.7.10.4
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 04/10 RESEND] mmc: spi: Pull out parts shared between MMC and SPI
@ 2012-07-23 20:40 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: linux-arm-kernel
Abstract out the common part of private data shared between MMC
and SPI. These shall later allow to use common clock configuration
function.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
drivers/mmc/host/mxs-mmc.c | 107 ++++++++++++++++++++++++-------------------
include/linux/spi/mxs-spi.h | 8 ++++
2 files changed, 67 insertions(+), 48 deletions(-)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index e80c2b6..7b85e03 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -62,23 +62,20 @@
#define MXS_MMC_DETECT_TIMEOUT (HZ/2)
struct mxs_mmc_host {
+ struct mxs_ssp ssp;
+
struct mmc_host *mmc;
struct mmc_request *mrq;
struct mmc_command *cmd;
struct mmc_data *data;
- void __iomem *base;
int dma_channel;
- struct clk *clk;
- unsigned int clk_rate;
-
struct dma_chan *dmach;
struct mxs_dma_data dma_data;
unsigned int dma_dir;
enum dma_transfer_direction slave_dirn;
u32 ssp_pio_words[SSP_PIO_NUM];
- enum mxs_ssp_id devid;
unsigned char bus_width;
spinlock_t lock;
int sdio_irq_en;
@@ -105,16 +102,18 @@ static int mxs_mmc_get_ro(struct mmc_host *mmc)
static int mxs_mmc_get_cd(struct mmc_host *mmc)
{
struct mxs_mmc_host *host = mmc_priv(mmc);
+ struct mxs_ssp *ssp = &host->ssp;
- return !(readl(host->base + HW_SSP_STATUS(host)) &
+ return !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
BM_SSP_STATUS_CARD_DETECT);
}
static void mxs_mmc_reset(struct mxs_mmc_host *host)
{
+ struct mxs_ssp *ssp = &host->ssp;
u32 ctrl0, ctrl1;
- stmp_reset_block(host->base);
+ stmp_reset_block(ssp->base);
ctrl0 = BM_SSP_CTRL0_IGNORE_CRC;
ctrl1 = BF_SSP(0x3, CTRL1_SSP_MODE) |
@@ -130,15 +129,15 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host)
writel(BF_SSP(0xffff, TIMING_TIMEOUT) |
BF_SSP(2, TIMING_CLOCK_DIVIDE) |
BF_SSP(0, TIMING_CLOCK_RATE),
- host->base + HW_SSP_TIMING(host));
+ ssp->base + HW_SSP_TIMING(ssp));
if (host->sdio_irq_en) {
ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
ctrl1 |= BM_SSP_CTRL1_SDIO_IRQ_EN;
}
- writel(ctrl0, host->base + HW_SSP_CTRL0);
- writel(ctrl1, host->base + HW_SSP_CTRL1(host));
+ writel(ctrl0, ssp->base + HW_SSP_CTRL0);
+ writel(ctrl1, ssp->base + HW_SSP_CTRL1(ssp));
}
static void mxs_mmc_start_cmd(struct mxs_mmc_host *host,
@@ -149,15 +148,16 @@ static void mxs_mmc_request_done(struct mxs_mmc_host *host)
struct mmc_command *cmd = host->cmd;
struct mmc_data *data = host->data;
struct mmc_request *mrq = host->mrq;
+ struct mxs_ssp *ssp = &host->ssp;
if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) {
if (mmc_resp_type(cmd) & MMC_RSP_136) {
- cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0(host));
- cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1(host));
- cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2(host));
- cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3(host));
+ cmd->resp[3] = readl(ssp->base + HW_SSP_SDRESP0(ssp));
+ cmd->resp[2] = readl(ssp->base + HW_SSP_SDRESP1(ssp));
+ cmd->resp[1] = readl(ssp->base + HW_SSP_SDRESP2(ssp));
+ cmd->resp[0] = readl(ssp->base + HW_SSP_SDRESP3(ssp));
} else {
- cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0(host));
+ cmd->resp[0] = readl(ssp->base + HW_SSP_SDRESP0(ssp));
}
}
@@ -196,13 +196,14 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
struct mxs_mmc_host *host = dev_id;
struct mmc_command *cmd = host->cmd;
struct mmc_data *data = host->data;
+ struct mxs_ssp *ssp = &host->ssp;
u32 stat;
spin_lock(&host->lock);
- stat = readl(host->base + HW_SSP_CTRL1(host));
+ stat = readl(ssp->base + HW_SSP_CTRL1(ssp));
writel(stat & MXS_MMC_IRQ_BITS,
- host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
+ ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_CLR);
if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
mmc_signal_sdio_irq(host->mmc);
@@ -366,6 +367,8 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
unsigned int data_size = 0, log2_blksz;
unsigned int blocks = data->blocks;
+ struct mxs_ssp *ssp = &host->ssp;
+
u32 ignore_crc, get_resp, long_resp, read;
u32 ctrl0, cmd0, cmd1, val;
@@ -408,15 +411,15 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
blocks = 1;
/* xfer count, block size and count need to be set differently */
- if (ssp_is_old(host)) {
+ if (ssp_is_old(ssp)) {
ctrl0 |= BF_SSP(data_size, CTRL0_XFER_COUNT);
cmd0 |= BF_SSP(log2_blksz, CMD0_BLOCK_SIZE) |
BF_SSP(blocks - 1, CMD0_BLOCK_COUNT);
} else {
- writel(data_size, host->base + HW_SSP_XFER_SIZE);
+ writel(data_size, ssp->base + HW_SSP_XFER_SIZE);
writel(BF_SSP(log2_blksz, BLOCK_SIZE_BLOCK_SIZE) |
BF_SSP(blocks - 1, BLOCK_SIZE_BLOCK_COUNT),
- host->base + HW_SSP_BLOCK_SIZE);
+ ssp->base + HW_SSP_BLOCK_SIZE);
}
if ((cmd->opcode == MMC_STOP_TRANSMISSION) ||
@@ -431,11 +434,11 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
}
/* set the timeout count */
- timeout = mxs_ns_to_ssp_ticks(host->clk_rate, data->timeout_ns);
- val = readl(host->base + HW_SSP_TIMING(host));
+ timeout = mxs_ns_to_ssp_ticks(ssp->clk_rate, data->timeout_ns);
+ val = readl(ssp->base + HW_SSP_TIMING(ssp));
val &= ~(BM_SSP_TIMING_TIMEOUT);
val |= BF_SSP(timeout, TIMING_TIMEOUT);
- writel(val, host->base + HW_SSP_TIMING(host));
+ writel(val, ssp->base + HW_SSP_TIMING(ssp));
/* pio */
host->ssp_pio_words[0] = ctrl0;
@@ -500,11 +503,12 @@ static void mxs_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate)
{
+ struct mxs_ssp *ssp = &host->ssp;
unsigned int ssp_clk, ssp_sck;
u32 clock_divide, clock_rate;
u32 val;
- ssp_clk = clk_get_rate(host->clk);
+ ssp_clk = clk_get_rate(ssp->clk);
for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
@@ -521,13 +525,13 @@ static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate)
ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
- val = readl(host->base + HW_SSP_TIMING(host));
+ val = readl(ssp->base + HW_SSP_TIMING(ssp));
val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
- writel(val, host->base + HW_SSP_TIMING(host));
+ writel(val, ssp->base + HW_SSP_TIMING(ssp));
- host->clk_rate = ssp_sck;
+ ssp->clk_rate = ssp_sck;
dev_dbg(mmc_dev(host->mmc),
"%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
@@ -552,6 +556,7 @@ static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
{
struct mxs_mmc_host *host = mmc_priv(mmc);
+ struct mxs_ssp *ssp = &host->ssp;
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
@@ -560,19 +565,19 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
if (enable) {
writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
- host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
- host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET);
+ ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_SET);
- if (readl(host->base + HW_SSP_STATUS(host)) &
+ if (readl(ssp->base + HW_SSP_STATUS(ssp)) &
BM_SSP_STATUS_SDIO_IRQ)
mmc_signal_sdio_irq(host->mmc);
} else {
writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
- host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
- host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
+ ssp->base + HW_SSP_CTRL1(ssp) + STMP_OFFSET_REG_CLR);
}
spin_unlock_irqrestore(&host->lock, flags);
@@ -635,6 +640,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
dma_cap_mask_t mask;
struct regulator *reg_vmmc;
enum of_gpio_flags flags;
+ struct mxs_ssp *ssp;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -648,14 +654,16 @@ static int mxs_mmc_probe(struct platform_device *pdev)
return -ENOMEM;
host = mmc_priv(mmc);
- host->base = devm_request_and_ioremap(&pdev->dev, iores);
- if (!host->base) {
+ ssp = &host->ssp;
+ ssp->dev = &pdev->dev;
+ ssp->base = devm_request_and_ioremap(&pdev->dev, iores);
+ if (!ssp->base) {
ret = -EADDRNOTAVAIL;
goto out_mmc_free;
}
if (np) {
- host->devid = (enum mxs_ssp_id) of_id->data;
+ ssp->devid = (enum mxs_ssp_id) of_id->data;
/*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helpers get in.
@@ -668,7 +676,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
goto out_mmc_free;
}
} else {
- host->devid = pdev->id_entry->driver_data;
+ ssp->devid = pdev->id_entry->driver_data;
host->dma_channel = dmares->start;
}
@@ -691,12 +699,12 @@ static int mxs_mmc_probe(struct platform_device *pdev)
goto out_mmc_free;
}
- host->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(host->clk)) {
- ret = PTR_ERR(host->clk);
+ ssp->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ssp->clk)) {
+ ret = PTR_ERR(ssp->clk);
goto out_mmc_free;
}
- clk_prepare_enable(host->clk);
+ clk_prepare_enable(ssp->clk);
mxs_mmc_reset(host);
@@ -741,8 +749,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
mmc->max_segs = 52;
mmc->max_blk_size = 1 << 0xf;
- mmc->max_blk_count = (ssp_is_old(host)) ? 0xff : 0xffffff;
- mmc->max_req_size = (ssp_is_old(host)) ? 0xffff : 0xffffffff;
+ mmc->max_blk_count = (ssp_is_old(ssp)) ? 0xff : 0xffffff;
+ mmc->max_req_size = (ssp_is_old(ssp)) ? 0xffff : 0xffffffff;
mmc->max_seg_size = dma_get_max_seg_size(host->dmach->device->dev);
platform_set_drvdata(pdev, mmc);
@@ -766,8 +774,8 @@ out_free_dma:
if (host->dmach)
dma_release_channel(host->dmach);
out_clk_put:
- clk_disable_unprepare(host->clk);
- clk_put(host->clk);
+ clk_disable_unprepare(ssp->clk);
+ clk_put(ssp->clk);
out_mmc_free:
mmc_free_host(mmc);
return ret;
@@ -777,6 +785,7 @@ static int mxs_mmc_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct mxs_mmc_host *host = mmc_priv(mmc);
+ struct mxs_ssp *ssp = &host->ssp;
mmc_remove_host(mmc);
@@ -785,8 +794,8 @@ static int mxs_mmc_remove(struct platform_device *pdev)
if (host->dmach)
dma_release_channel(host->dmach);
- clk_disable_unprepare(host->clk);
- clk_put(host->clk);
+ clk_disable_unprepare(ssp->clk);
+ clk_put(ssp->clk);
mmc_free_host(mmc);
@@ -798,11 +807,12 @@ static int mxs_mmc_suspend(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
struct mxs_mmc_host *host = mmc_priv(mmc);
+ struct mxs_ssp *ssp = &host->ssp;
int ret = 0;
ret = mmc_suspend_host(mmc);
- clk_disable_unprepare(host->clk);
+ clk_disable_unprepare(ssp->clk);
return ret;
}
@@ -811,9 +821,10 @@ static int mxs_mmc_resume(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
struct mxs_mmc_host *host = mmc_priv(mmc);
+ struct mxs_ssp *ssp = &host->ssp;
int ret = 0;
- clk_prepare_enable(host->clk);
+ clk_prepare_enable(ssp->clk);
ret = mmc_resume_host(mmc);
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index 7dfa1d7..475f69f 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -128,4 +128,12 @@ enum mxs_ssp_id {
IMX28_SSP,
};
+struct mxs_ssp {
+ struct device *dev;
+ void __iomem *base;
+ struct clk *clk;
+ unsigned int clk_rate;
+ enum mxs_ssp_id devid;
+};
+
#endif /* __LINUX_SPI_MXS_SPI_H__ */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 05/10 V2] mmc: spi: Pull out the SSP clock configuration function
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-23 20:40 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Cc: Marek Vasut, Fabio Estevam, Shawn Guo, Mark Brown, Attila Kinali,
Chris Ball, Dong Aisheng, Linux ARM kernel
Pull out the MMC clock configuration function and make it
into SSP clock configuration function, so it can be used by
the SPI driver too.
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
drivers/clk/mxs/Makefile | 2 +-
drivers/clk/mxs/clk-ssp.c | 62 +++++++++++++++++++++++++++++++++++++++++++
drivers/mmc/host/mxs-mmc.c | 39 +--------------------------
include/linux/spi/mxs-spi.h | 2 ++
4 files changed, 66 insertions(+), 39 deletions(-)
create mode 100644 drivers/clk/mxs/clk-ssp.c
V2: Add EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate); to allow compiling as a module.
(Thanks to Attila Kinali).
diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile
index 7bedeec..a6a2223 100644
--- a/drivers/clk/mxs/Makefile
+++ b/drivers/clk/mxs/Makefile
@@ -2,7 +2,7 @@
# Makefile for mxs specific clk
#
-obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o
+obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o clk-ssp.o
obj-$(CONFIG_SOC_IMX23) += clk-imx23.o
obj-$(CONFIG_SOC_IMX28) += clk-imx28.o
diff --git a/drivers/clk/mxs/clk-ssp.c b/drivers/clk/mxs/clk-ssp.c
new file mode 100644
index 0000000..af7bdbf
--- /dev/null
+++ b/drivers/clk/mxs/clk-ssp.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2012 DENX Software Engineering, GmbH
+ *
+ * Pulled from code:
+ * Portions copyright (C) 2003 Russell King, PXA MMCI Driver
+ * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/spi/mxs-spi.h>
+
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate)
+{
+ unsigned int ssp_clk, ssp_sck;
+ u32 clock_divide, clock_rate;
+ u32 val;
+
+ ssp_clk = clk_get_rate(ssp->clk);
+
+ for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
+ clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
+ clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0;
+ if (clock_rate <= 255)
+ break;
+ }
+
+ if (clock_divide > 254) {
+ dev_err(ssp->dev,
+ "%s: cannot set clock to %d\n", __func__, rate);
+ return;
+ }
+
+ ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
+
+ val = readl(ssp->base + HW_SSP_TIMING(ssp));
+ val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
+ val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
+ val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
+ writel(val, ssp->base + HW_SSP_TIMING(ssp));
+
+ ssp->clk_rate = ssp_sck;
+
+ dev_dbg(ssp->dev,
+ "%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
+ __func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate);
+}
+EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate);
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 7b85e03..0813340 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -501,43 +501,6 @@ static void mxs_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
mxs_mmc_start_cmd(host, mrq->cmd);
}
-static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate)
-{
- struct mxs_ssp *ssp = &host->ssp;
- unsigned int ssp_clk, ssp_sck;
- u32 clock_divide, clock_rate;
- u32 val;
-
- ssp_clk = clk_get_rate(ssp->clk);
-
- for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
- clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
- clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0;
- if (clock_rate <= 255)
- break;
- }
-
- if (clock_divide > 254) {
- dev_err(mmc_dev(host->mmc),
- "%s: cannot set clock to %d\n", __func__, rate);
- return;
- }
-
- ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
-
- val = readl(ssp->base + HW_SSP_TIMING(ssp));
- val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
- val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
- val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
- writel(val, ssp->base + HW_SSP_TIMING(ssp));
-
- ssp->clk_rate = ssp_sck;
-
- dev_dbg(mmc_dev(host->mmc),
- "%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
- __func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate);
-}
-
static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct mxs_mmc_host *host = mmc_priv(mmc);
@@ -550,7 +513,7 @@ static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
host->bus_width = 0;
if (ios->clock)
- mxs_mmc_set_clk_rate(host, ios->clock);
+ mxs_ssp_set_clk_rate(&host->ssp, ios->clock);
}
static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index 475f69f..d07f8dc 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -136,4 +136,6 @@ struct mxs_ssp {
enum mxs_ssp_id devid;
};
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);
+
#endif /* __LINUX_SPI_MXS_SPI_H__ */
--
1.7.10.4
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 05/10 V2] mmc: spi: Pull out the SSP clock configuration function
@ 2012-07-23 20:40 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: linux-arm-kernel
Pull out the MMC clock configuration function and make it
into SSP clock configuration function, so it can be used by
the SPI driver too.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
drivers/clk/mxs/Makefile | 2 +-
drivers/clk/mxs/clk-ssp.c | 62 +++++++++++++++++++++++++++++++++++++++++++
drivers/mmc/host/mxs-mmc.c | 39 +--------------------------
include/linux/spi/mxs-spi.h | 2 ++
4 files changed, 66 insertions(+), 39 deletions(-)
create mode 100644 drivers/clk/mxs/clk-ssp.c
V2: Add EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate); to allow compiling as a module.
(Thanks to Attila Kinali).
diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile
index 7bedeec..a6a2223 100644
--- a/drivers/clk/mxs/Makefile
+++ b/drivers/clk/mxs/Makefile
@@ -2,7 +2,7 @@
# Makefile for mxs specific clk
#
-obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o
+obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o clk-ssp.o
obj-$(CONFIG_SOC_IMX23) += clk-imx23.o
obj-$(CONFIG_SOC_IMX28) += clk-imx28.o
diff --git a/drivers/clk/mxs/clk-ssp.c b/drivers/clk/mxs/clk-ssp.c
new file mode 100644
index 0000000..af7bdbf
--- /dev/null
+++ b/drivers/clk/mxs/clk-ssp.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2012 DENX Software Engineering, GmbH
+ *
+ * Pulled from code:
+ * Portions copyright (C) 2003 Russell King, PXA MMCI Driver
+ * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/spi/mxs-spi.h>
+
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate)
+{
+ unsigned int ssp_clk, ssp_sck;
+ u32 clock_divide, clock_rate;
+ u32 val;
+
+ ssp_clk = clk_get_rate(ssp->clk);
+
+ for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
+ clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
+ clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0;
+ if (clock_rate <= 255)
+ break;
+ }
+
+ if (clock_divide > 254) {
+ dev_err(ssp->dev,
+ "%s: cannot set clock to %d\n", __func__, rate);
+ return;
+ }
+
+ ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
+
+ val = readl(ssp->base + HW_SSP_TIMING(ssp));
+ val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
+ val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
+ val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
+ writel(val, ssp->base + HW_SSP_TIMING(ssp));
+
+ ssp->clk_rate = ssp_sck;
+
+ dev_dbg(ssp->dev,
+ "%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
+ __func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate);
+}
+EXPORT_SYMBOL_GPL(mxs_ssp_set_clk_rate);
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 7b85e03..0813340 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -501,43 +501,6 @@ static void mxs_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
mxs_mmc_start_cmd(host, mrq->cmd);
}
-static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate)
-{
- struct mxs_ssp *ssp = &host->ssp;
- unsigned int ssp_clk, ssp_sck;
- u32 clock_divide, clock_rate;
- u32 val;
-
- ssp_clk = clk_get_rate(ssp->clk);
-
- for (clock_divide = 2; clock_divide <= 254; clock_divide += 2) {
- clock_rate = DIV_ROUND_UP(ssp_clk, rate * clock_divide);
- clock_rate = (clock_rate > 0) ? clock_rate - 1 : 0;
- if (clock_rate <= 255)
- break;
- }
-
- if (clock_divide > 254) {
- dev_err(mmc_dev(host->mmc),
- "%s: cannot set clock to %d\n", __func__, rate);
- return;
- }
-
- ssp_sck = ssp_clk / clock_divide / (1 + clock_rate);
-
- val = readl(ssp->base + HW_SSP_TIMING(ssp));
- val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
- val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE);
- val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE);
- writel(val, ssp->base + HW_SSP_TIMING(ssp));
-
- ssp->clk_rate = ssp_sck;
-
- dev_dbg(mmc_dev(host->mmc),
- "%s: clock_divide %d, clock_rate %d, ssp_clk %d, rate_actual %d, rate_requested %d\n",
- __func__, clock_divide, clock_rate, ssp_clk, ssp_sck, rate);
-}
-
static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct mxs_mmc_host *host = mmc_priv(mmc);
@@ -550,7 +513,7 @@ static void mxs_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
host->bus_width = 0;
if (ios->clock)
- mxs_mmc_set_clk_rate(host, ios->clock);
+ mxs_ssp_set_clk_rate(&host->ssp, ios->clock);
}
static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index 475f69f..d07f8dc 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -136,4 +136,6 @@ struct mxs_ssp {
enum mxs_ssp_id devid;
};
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);
+
#endif /* __LINUX_SPI_MXS_SPI_H__ */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-23 20:40 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Cc: Marek Vasut, Fabio Estevam, Shawn Guo, Mark Brown, Attila Kinali,
Chris Ball, Dong Aisheng, Linux ARM kernel
This is slightly reworked version of the SPI driver.
Support for DT has been added and it's been converted
to queued API.
Based on previous attempt by:
Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-mxs.c | 428 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 436 insertions(+)
create mode 100644 drivers/spi/spi-mxs.c
V2: Adjust the HW_SSP_DATA usage as it's now a parametrized macro
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 5f84b55..6992b30 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -364,6 +364,13 @@ config SPI_STMP3XXX
help
SPI driver for Freescale STMP37xx/378x SoC SSP interface
+config SPI_MXS
+ tristate "Freescale MXS SPI controller"
+ depends on ARCH_MXS
+ select STMP_DEVICE
+ help
+ SPI driver for Freescale MXS devices.
+
config SPI_TEGRA
tristate "Nvidia Tegra SPI controller"
depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA)
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 3920dcf..3b72d87 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
+obj-$(CONFIG_SPI_MXS) += spi-mxs.o
obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += spi-omap-uwire.o
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
new file mode 100644
index 0000000..dce986c
--- /dev/null
+++ b/drivers/spi/spi-mxs.c
@@ -0,0 +1,428 @@
+/*
+ * Freescale MXS SPI master driver
+ *
+ * Copyright 2012 DENX Software Engineering, GmbH.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * Rework and transition to new API by:
+ * Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
+ *
+ * Based on previous attempt by:
+ * Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
+ *
+ * Based on code from U-Boot bootloader by:
+ * Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
+ *
+ * Based on spi-stmp.c, which is:
+ * Author: Dmitry Pervushin <dimka-L1vi/lXTdtvkgf6YlCu6wwC/G2K4zDHf@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/highmem.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/completion.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/fsl/mxs-dma.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/stmp_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mxs-spi.h>
+
+#define DRIVER_NAME "mxs-spi"
+
+#define SSP_TIMEOUT 1000 /* 1000 ms */
+
+struct mxs_spi {
+ struct mxs_ssp ssp;
+};
+
+static int mxs_spi_setup_transfer(struct spi_device *dev,
+ struct spi_transfer *t)
+{
+ struct mxs_spi *spi = spi_master_get_devdata(dev->master);
+ struct mxs_ssp *ssp = &spi->ssp;
+ uint8_t bits_per_word;
+ uint32_t hz = 0;
+
+ bits_per_word = dev->bits_per_word;
+ if (t && t->bits_per_word)
+ bits_per_word = t->bits_per_word;
+
+ if (bits_per_word != 8) {
+ dev_err(&dev->dev, "%s, unsupported bits_per_word=%d\n",
+ __func__, bits_per_word);
+ return -EINVAL;
+ }
+
+ if (dev->max_speed_hz)
+ hz = dev->max_speed_hz;
+ if (t && t->speed_hz)
+ hz = t->speed_hz;
+ if (hz == 0) {
+ dev_err(&dev->dev, "Cannot continue with zero clock\n");
+ return -EINVAL;
+ }
+
+ mxs_ssp_set_clk_rate(ssp, hz);
+
+ writel(BF_SSP_CTRL1_SSP_MODE(BV_SSP_CTRL1_SSP_MODE__SPI) |
+ BF_SSP_CTRL1_WORD_LENGTH
+ (BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS) |
+ ((dev->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) |
+ ((dev->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0),
+ ssp->base + HW_SSP_CTRL1(ssp));
+
+ writel(0x0, ssp->base + HW_SSP_CMD0);
+ writel(0x0, ssp->base + HW_SSP_CMD1);
+
+ return 0;
+}
+
+static void mxs_spi_cleanup(struct spi_device *dev)
+{
+ return;
+}
+
+static int mxs_spi_setup(struct spi_device *dev)
+{
+ int err = 0;
+
+ if (!dev->bits_per_word)
+ dev->bits_per_word = 8;
+
+ if (dev->mode & ~(SPI_CPOL | SPI_CPHA))
+ return -EINVAL;
+
+ err = mxs_spi_setup_transfer(dev, NULL);
+ if (err) {
+ dev_err(&dev->dev,
+ "Failed to setup transfer, error = %d\n", err);
+ }
+
+ return err;
+}
+
+static uint32_t mxs_spi_cs_to_reg(unsigned cs)
+{
+ uint32_t select = 0;
+
+ if (cs & 1)
+ select |= BM_SSP_CTRL0_WAIT_FOR_CMD;
+ if (cs & 2)
+ select |= BM_SSP_CTRL0_WAIT_FOR_IRQ;
+
+ return select;
+}
+
+static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
+{
+ const uint32_t mask =
+ BM_SSP_CTRL0_WAIT_FOR_CMD | BM_SSP_CTRL0_WAIT_FOR_IRQ;
+ uint32_t select;
+ struct mxs_ssp *ssp = &spi->ssp;
+
+ writel(mask, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ select = mxs_spi_cs_to_reg(cs);
+ writel(select, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+}
+
+static inline void mxs_spi_enable(struct mxs_spi *spi)
+{
+ struct mxs_ssp *ssp = &spi->ssp;
+
+ writel(BM_SSP_CTRL0_LOCK_CS,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+ writel(BM_SSP_CTRL0_IGNORE_CRC,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+}
+
+static inline void mxs_spi_disable(struct mxs_spi *spi)
+{
+ struct mxs_ssp *ssp = &spi->ssp;
+
+ writel(BM_SSP_CTRL0_LOCK_CS,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ writel(BM_SSP_CTRL0_IGNORE_CRC,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+}
+
+static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(SSP_TIMEOUT);
+ struct mxs_ssp *ssp = &spi->ssp;
+ uint32_t reg;
+
+ while (1) {
+ reg = readl_relaxed(ssp->base + offset);
+
+ if (set && ((reg & mask) == mask))
+ break;
+
+ if (!set && ((~reg & mask) == mask))
+ break;
+
+ udelay(1);
+
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static int mxs_spi_txrx_pio(struct mxs_spi *spi, int cs,
+ unsigned char *buf, int len,
+ int *first, int *last, int write)
+{
+ struct mxs_ssp *ssp = &spi->ssp;
+
+ if (*first)
+ mxs_spi_enable(spi);
+
+ mxs_spi_set_cs(spi, cs);
+
+ while (len--) {
+ if (*last && len == 0)
+ mxs_spi_disable(spi);
+
+ if (ssp->devid == IMX23_SSP) {
+ writel(BM_SSP_CTRL0_XFER_COUNT,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ writel(1,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+ } else {
+ writel(1, ssp->base + HW_SSP_XFER_SIZE);
+ }
+
+ if (write)
+ writel(BM_SSP_CTRL0_READ,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ else
+ writel(BM_SSP_CTRL0_READ,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+
+ writel(BM_SSP_CTRL0_RUN,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+
+ if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 1))
+ return -ETIMEDOUT;
+
+ if (write)
+ writel(*buf, ssp->base + HW_SSP_DATA(ssp));
+
+ writel(BM_SSP_CTRL0_DATA_XFER,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+
+ if (!write) {
+ if (mxs_ssp_wait(spi, HW_SSP_STATUS(ssp),
+ BM_SSP_STATUS_FIFO_EMPTY, 0))
+ return -ETIMEDOUT;
+
+ *buf = (readl(ssp->base + HW_SSP_DATA(ssp)) & 0xff);
+ }
+
+ if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 0))
+ return -ETIMEDOUT;
+
+ buf++;
+ }
+
+ if (len <= 0)
+ return 0;
+
+ return -ETIMEDOUT;
+}
+
+static int mxs_spi_transfer_one(struct spi_master *master,
+ struct spi_message *m)
+{
+ struct mxs_spi *spi = spi_master_get_devdata(master);
+ struct mxs_ssp *ssp = &spi->ssp;
+ int first, last;
+ struct spi_transfer *t, *tmp_t;
+ int status = 0;
+ int cs;
+
+ first = last = 0;
+
+ cs = m->spi->chip_select;
+
+ list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) {
+
+ mxs_spi_setup_transfer(m->spi, t);
+
+ if (&t->transfer_list == m->transfers.next)
+ first = 1;
+ if (&t->transfer_list == m->transfers.prev)
+ last = 1;
+ if (t->rx_buf && t->tx_buf) {
+ dev_err(ssp->dev,
+ "Cannot send and receive simultaneously\n");
+ return -EINVAL;
+ }
+
+ if (t->tx_buf)
+ status = mxs_spi_txrx_pio(spi, cs, (void *)t->tx_buf,
+ t->len, &first, &last, 1);
+ if (t->rx_buf)
+ status = mxs_spi_txrx_pio(spi, cs, t->rx_buf,
+ t->len, &first, &last, 0);
+
+ m->actual_length += t->len;
+ if (status)
+ break;
+
+ first = last = 0;
+ }
+
+ m->status = 0;
+ spi_finalize_current_message(master);
+
+ return status;
+}
+
+static const struct of_device_id mxs_spi_dt_ids[] = {
+ { .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, },
+ { .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_spi_dt_ids);
+
+static int __devinit mxs_spi_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id =
+ of_match_device(mxs_spi_dt_ids, &pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
+ struct spi_master *master;
+ struct mxs_spi *spi;
+ struct mxs_ssp *ssp;
+ struct resource *iores;
+ struct pinctrl *pinctrl;
+ struct clk *clk;
+ void __iomem *base;
+ int devid;
+ int ret = 0;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores)
+ return -EINVAL;
+
+ base = devm_request_and_ioremap(&pdev->dev, iores);
+ if (!base)
+ return -EADDRNOTAVAIL;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ return PTR_ERR(pinctrl);
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ if (np)
+ devid = (enum mxs_ssp_id) of_id->data;
+ else
+ devid = pdev->id_entry->driver_data;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*spi));
+ if (!master)
+ return -ENOMEM;
+
+ master->transfer_one_message = mxs_spi_transfer_one;
+ master->setup = mxs_spi_setup;
+ master->cleanup = mxs_spi_cleanup;
+ master->mode_bits = SPI_CPOL | SPI_CPHA;
+ master->num_chipselect = 3;
+ master->dev.of_node = np;
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+
+ spi = spi_master_get_devdata(master);
+ ssp = &spi->ssp;
+ ssp->dev = &pdev->dev;
+ ssp->clk = clk;
+ ssp->base = base;
+ ssp->devid = devid;
+
+ clk_prepare_enable(ssp->clk);
+ ssp->clk_rate = clk_get_rate(ssp->clk) / 1000;
+
+ stmp_reset_block(ssp->base);
+
+ platform_set_drvdata(pdev, master);
+
+ ret = spi_register_master(master);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret);
+ goto out_master_free;
+ }
+
+ return 0;
+
+out_master_free:
+ clk_disable_unprepare(ssp->clk);
+ spi_master_put(master);
+ kfree(master);
+ return ret;
+}
+
+static int __devexit mxs_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct mxs_spi *spi;
+ struct mxs_ssp *ssp;
+
+ master = platform_get_drvdata(pdev);
+ spi = spi_master_get_devdata(master);
+ ssp = &spi->ssp;
+
+ spi_unregister_master(master);
+
+ platform_set_drvdata(pdev, NULL);
+
+ clk_disable_unprepare(ssp->clk);
+
+ spi_master_put(master);
+ kfree(master);
+
+ return 0;
+}
+
+static struct platform_driver mxs_spi_driver = {
+ .probe = mxs_spi_probe,
+ .remove = __devexit_p(mxs_spi_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = mxs_spi_dt_ids,
+ },
+};
+
+module_platform_driver(mxs_spi_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>");
+MODULE_DESCRIPTION("MXS SPI master driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mxs-spi");
--
1.7.10.4
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
@ 2012-07-23 20:40 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: linux-arm-kernel
This is slightly reworked version of the SPI driver.
Support for DT has been added and it's been converted
to queued API.
Based on previous attempt by:
Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
drivers/spi/Kconfig | 7 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-mxs.c | 428 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 436 insertions(+)
create mode 100644 drivers/spi/spi-mxs.c
V2: Adjust the HW_SSP_DATA usage as it's now a parametrized macro
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 5f84b55..6992b30 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -364,6 +364,13 @@ config SPI_STMP3XXX
help
SPI driver for Freescale STMP37xx/378x SoC SSP interface
+config SPI_MXS
+ tristate "Freescale MXS SPI controller"
+ depends on ARCH_MXS
+ select STMP_DEVICE
+ help
+ SPI driver for Freescale MXS devices.
+
config SPI_TEGRA
tristate "Nvidia Tegra SPI controller"
depends on ARCH_TEGRA && (TEGRA_SYSTEM_DMA || TEGRA20_APB_DMA)
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 3920dcf..3b72d87 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o
obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
+obj-$(CONFIG_SPI_MXS) += spi-mxs.o
obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += spi-omap-uwire.o
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
new file mode 100644
index 0000000..dce986c
--- /dev/null
+++ b/drivers/spi/spi-mxs.c
@@ -0,0 +1,428 @@
+/*
+ * Freescale MXS SPI master driver
+ *
+ * Copyright 2012 DENX Software Engineering, GmbH.
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * Rework and transition to new API by:
+ * Marek Vasut <marex@denx.de>
+ *
+ * Based on previous attempt by:
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * Based on code from U-Boot bootloader by:
+ * Marek Vasut <marex@denx.de>
+ *
+ * Based on spi-stmp.c, which is:
+ * Author: Dmitry Pervushin <dimka@embeddedalley.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/highmem.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/completion.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/fsl/mxs-dma.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/stmp_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mxs-spi.h>
+
+#define DRIVER_NAME "mxs-spi"
+
+#define SSP_TIMEOUT 1000 /* 1000 ms */
+
+struct mxs_spi {
+ struct mxs_ssp ssp;
+};
+
+static int mxs_spi_setup_transfer(struct spi_device *dev,
+ struct spi_transfer *t)
+{
+ struct mxs_spi *spi = spi_master_get_devdata(dev->master);
+ struct mxs_ssp *ssp = &spi->ssp;
+ uint8_t bits_per_word;
+ uint32_t hz = 0;
+
+ bits_per_word = dev->bits_per_word;
+ if (t && t->bits_per_word)
+ bits_per_word = t->bits_per_word;
+
+ if (bits_per_word != 8) {
+ dev_err(&dev->dev, "%s, unsupported bits_per_word=%d\n",
+ __func__, bits_per_word);
+ return -EINVAL;
+ }
+
+ if (dev->max_speed_hz)
+ hz = dev->max_speed_hz;
+ if (t && t->speed_hz)
+ hz = t->speed_hz;
+ if (hz == 0) {
+ dev_err(&dev->dev, "Cannot continue with zero clock\n");
+ return -EINVAL;
+ }
+
+ mxs_ssp_set_clk_rate(ssp, hz);
+
+ writel(BF_SSP_CTRL1_SSP_MODE(BV_SSP_CTRL1_SSP_MODE__SPI) |
+ BF_SSP_CTRL1_WORD_LENGTH
+ (BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS) |
+ ((dev->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) |
+ ((dev->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0),
+ ssp->base + HW_SSP_CTRL1(ssp));
+
+ writel(0x0, ssp->base + HW_SSP_CMD0);
+ writel(0x0, ssp->base + HW_SSP_CMD1);
+
+ return 0;
+}
+
+static void mxs_spi_cleanup(struct spi_device *dev)
+{
+ return;
+}
+
+static int mxs_spi_setup(struct spi_device *dev)
+{
+ int err = 0;
+
+ if (!dev->bits_per_word)
+ dev->bits_per_word = 8;
+
+ if (dev->mode & ~(SPI_CPOL | SPI_CPHA))
+ return -EINVAL;
+
+ err = mxs_spi_setup_transfer(dev, NULL);
+ if (err) {
+ dev_err(&dev->dev,
+ "Failed to setup transfer, error = %d\n", err);
+ }
+
+ return err;
+}
+
+static uint32_t mxs_spi_cs_to_reg(unsigned cs)
+{
+ uint32_t select = 0;
+
+ if (cs & 1)
+ select |= BM_SSP_CTRL0_WAIT_FOR_CMD;
+ if (cs & 2)
+ select |= BM_SSP_CTRL0_WAIT_FOR_IRQ;
+
+ return select;
+}
+
+static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
+{
+ const uint32_t mask =
+ BM_SSP_CTRL0_WAIT_FOR_CMD | BM_SSP_CTRL0_WAIT_FOR_IRQ;
+ uint32_t select;
+ struct mxs_ssp *ssp = &spi->ssp;
+
+ writel(mask, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ select = mxs_spi_cs_to_reg(cs);
+ writel(select, ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+}
+
+static inline void mxs_spi_enable(struct mxs_spi *spi)
+{
+ struct mxs_ssp *ssp = &spi->ssp;
+
+ writel(BM_SSP_CTRL0_LOCK_CS,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+ writel(BM_SSP_CTRL0_IGNORE_CRC,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+}
+
+static inline void mxs_spi_disable(struct mxs_spi *spi)
+{
+ struct mxs_ssp *ssp = &spi->ssp;
+
+ writel(BM_SSP_CTRL0_LOCK_CS,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ writel(BM_SSP_CTRL0_IGNORE_CRC,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+}
+
+static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(SSP_TIMEOUT);
+ struct mxs_ssp *ssp = &spi->ssp;
+ uint32_t reg;
+
+ while (1) {
+ reg = readl_relaxed(ssp->base + offset);
+
+ if (set && ((reg & mask) == mask))
+ break;
+
+ if (!set && ((~reg & mask) == mask))
+ break;
+
+ udelay(1);
+
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static int mxs_spi_txrx_pio(struct mxs_spi *spi, int cs,
+ unsigned char *buf, int len,
+ int *first, int *last, int write)
+{
+ struct mxs_ssp *ssp = &spi->ssp;
+
+ if (*first)
+ mxs_spi_enable(spi);
+
+ mxs_spi_set_cs(spi, cs);
+
+ while (len--) {
+ if (*last && len == 0)
+ mxs_spi_disable(spi);
+
+ if (ssp->devid == IMX23_SSP) {
+ writel(BM_SSP_CTRL0_XFER_COUNT,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ writel(1,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+ } else {
+ writel(1, ssp->base + HW_SSP_XFER_SIZE);
+ }
+
+ if (write)
+ writel(BM_SSP_CTRL0_READ,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ else
+ writel(BM_SSP_CTRL0_READ,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+
+ writel(BM_SSP_CTRL0_RUN,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+
+ if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 1))
+ return -ETIMEDOUT;
+
+ if (write)
+ writel(*buf, ssp->base + HW_SSP_DATA(ssp));
+
+ writel(BM_SSP_CTRL0_DATA_XFER,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+
+ if (!write) {
+ if (mxs_ssp_wait(spi, HW_SSP_STATUS(ssp),
+ BM_SSP_STATUS_FIFO_EMPTY, 0))
+ return -ETIMEDOUT;
+
+ *buf = (readl(ssp->base + HW_SSP_DATA(ssp)) & 0xff);
+ }
+
+ if (mxs_ssp_wait(spi, HW_SSP_CTRL0, BM_SSP_CTRL0_RUN, 0))
+ return -ETIMEDOUT;
+
+ buf++;
+ }
+
+ if (len <= 0)
+ return 0;
+
+ return -ETIMEDOUT;
+}
+
+static int mxs_spi_transfer_one(struct spi_master *master,
+ struct spi_message *m)
+{
+ struct mxs_spi *spi = spi_master_get_devdata(master);
+ struct mxs_ssp *ssp = &spi->ssp;
+ int first, last;
+ struct spi_transfer *t, *tmp_t;
+ int status = 0;
+ int cs;
+
+ first = last = 0;
+
+ cs = m->spi->chip_select;
+
+ list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) {
+
+ mxs_spi_setup_transfer(m->spi, t);
+
+ if (&t->transfer_list == m->transfers.next)
+ first = 1;
+ if (&t->transfer_list == m->transfers.prev)
+ last = 1;
+ if (t->rx_buf && t->tx_buf) {
+ dev_err(ssp->dev,
+ "Cannot send and receive simultaneously\n");
+ return -EINVAL;
+ }
+
+ if (t->tx_buf)
+ status = mxs_spi_txrx_pio(spi, cs, (void *)t->tx_buf,
+ t->len, &first, &last, 1);
+ if (t->rx_buf)
+ status = mxs_spi_txrx_pio(spi, cs, t->rx_buf,
+ t->len, &first, &last, 0);
+
+ m->actual_length += t->len;
+ if (status)
+ break;
+
+ first = last = 0;
+ }
+
+ m->status = 0;
+ spi_finalize_current_message(master);
+
+ return status;
+}
+
+static const struct of_device_id mxs_spi_dt_ids[] = {
+ { .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, },
+ { .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_spi_dt_ids);
+
+static int __devinit mxs_spi_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id =
+ of_match_device(mxs_spi_dt_ids, &pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
+ struct spi_master *master;
+ struct mxs_spi *spi;
+ struct mxs_ssp *ssp;
+ struct resource *iores;
+ struct pinctrl *pinctrl;
+ struct clk *clk;
+ void __iomem *base;
+ int devid;
+ int ret = 0;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores)
+ return -EINVAL;
+
+ base = devm_request_and_ioremap(&pdev->dev, iores);
+ if (!base)
+ return -EADDRNOTAVAIL;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ return PTR_ERR(pinctrl);
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ if (np)
+ devid = (enum mxs_ssp_id) of_id->data;
+ else
+ devid = pdev->id_entry->driver_data;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*spi));
+ if (!master)
+ return -ENOMEM;
+
+ master->transfer_one_message = mxs_spi_transfer_one;
+ master->setup = mxs_spi_setup;
+ master->cleanup = mxs_spi_cleanup;
+ master->mode_bits = SPI_CPOL | SPI_CPHA;
+ master->num_chipselect = 3;
+ master->dev.of_node = np;
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+
+ spi = spi_master_get_devdata(master);
+ ssp = &spi->ssp;
+ ssp->dev = &pdev->dev;
+ ssp->clk = clk;
+ ssp->base = base;
+ ssp->devid = devid;
+
+ clk_prepare_enable(ssp->clk);
+ ssp->clk_rate = clk_get_rate(ssp->clk) / 1000;
+
+ stmp_reset_block(ssp->base);
+
+ platform_set_drvdata(pdev, master);
+
+ ret = spi_register_master(master);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret);
+ goto out_master_free;
+ }
+
+ return 0;
+
+out_master_free:
+ clk_disable_unprepare(ssp->clk);
+ spi_master_put(master);
+ kfree(master);
+ return ret;
+}
+
+static int __devexit mxs_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct mxs_spi *spi;
+ struct mxs_ssp *ssp;
+
+ master = platform_get_drvdata(pdev);
+ spi = spi_master_get_devdata(master);
+ ssp = &spi->ssp;
+
+ spi_unregister_master(master);
+
+ platform_set_drvdata(pdev, NULL);
+
+ clk_disable_unprepare(ssp->clk);
+
+ spi_master_put(master);
+ kfree(master);
+
+ return 0;
+}
+
+static struct platform_driver mxs_spi_driver = {
+ .probe = mxs_spi_probe,
+ .remove = __devexit_p(mxs_spi_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = mxs_spi_dt_ids,
+ },
+};
+
+module_platform_driver(mxs_spi_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("MXS SPI master driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mxs-spi");
--
1.7.10.4
^ permalink raw reply related [flat|nested] 62+ messages in thread[parent not found: <1343076052-27312-7-git-send-email-marex-ynQEQJNshbs@public.gmane.org>]
* Re: [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
2012-07-23 20:40 ` Marek Vasut
@ 2012-08-01 20:31 ` Mark Brown
-1 siblings, 0 replies; 62+ messages in thread
From: Mark Brown @ 2012-08-01 20:31 UTC (permalink / raw)
To: Marek Vasut
Cc: Fabio Estevam, Shawn Guo, Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
On Mon, Jul 23, 2012 at 10:40:48PM +0200, Marek Vasut wrote:
> This is slightly reworked version of the SPI driver.
> Support for DT has been added and it's been converted
> to queued API.
Looks reasonable overall.
> + bits_per_word = dev->bits_per_word;
> + if (t && t->bits_per_word)
> + bits_per_word = t->bits_per_word;
> +
> + if (bits_per_word != 8) {
> + dev_err(&dev->dev, "%s, unsupported bits_per_word=%d\n",
> + __func__, bits_per_word);
> + return -EINVAL;
> + }
> + if (dev->max_speed_hz)
> + hz = dev->max_speed_hz;
> + if (t && t->speed_hz)
> + hz = t->speed_hz;
> + if (hz == 0) {
> + dev_err(&dev->dev, "Cannot continue with zero clock\n");
> + return -EINVAL;
> + }
These two blocks use a different style (the first does the first assign
unconditionally, the second uses initialisation with declaration). I
prefer the first style but YMMV and it doesn't matter.
For the missing clock rate might it make sense to just use whatever the
clock happens to come out as?
> +static void mxs_spi_cleanup(struct spi_device *dev)
> +{
> + return;
> +}
Empty functions are generally a warning sign... why do we need this
one?
> +static int __devexit mxs_spi_remove(struct platform_device *pdev)
> +{
> + clk_disable_unprepare(ssp->clk);
It'd be nice to only keep the clocks enabled while doing transfers but
again totally non-essential.
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread* [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
@ 2012-08-01 20:31 ` Mark Brown
0 siblings, 0 replies; 62+ messages in thread
From: Mark Brown @ 2012-08-01 20:31 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jul 23, 2012 at 10:40:48PM +0200, Marek Vasut wrote:
> This is slightly reworked version of the SPI driver.
> Support for DT has been added and it's been converted
> to queued API.
Looks reasonable overall.
> + bits_per_word = dev->bits_per_word;
> + if (t && t->bits_per_word)
> + bits_per_word = t->bits_per_word;
> +
> + if (bits_per_word != 8) {
> + dev_err(&dev->dev, "%s, unsupported bits_per_word=%d\n",
> + __func__, bits_per_word);
> + return -EINVAL;
> + }
> + if (dev->max_speed_hz)
> + hz = dev->max_speed_hz;
> + if (t && t->speed_hz)
> + hz = t->speed_hz;
> + if (hz == 0) {
> + dev_err(&dev->dev, "Cannot continue with zero clock\n");
> + return -EINVAL;
> + }
These two blocks use a different style (the first does the first assign
unconditionally, the second uses initialisation with declaration). I
prefer the first style but YMMV and it doesn't matter.
For the missing clock rate might it make sense to just use whatever the
clock happens to come out as?
> +static void mxs_spi_cleanup(struct spi_device *dev)
> +{
> + return;
> +}
Empty functions are generally a warning sign... why do we need this
one?
> +static int __devexit mxs_spi_remove(struct platform_device *pdev)
> +{
> + clk_disable_unprepare(ssp->clk);
It'd be nice to only keep the clocks enabled while doing transfers but
again totally non-essential.
^ permalink raw reply [flat|nested] 62+ messages in thread[parent not found: <20120801203106.GW4483-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>]
* Re: [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
2012-08-01 20:31 ` Mark Brown
@ 2012-08-02 14:58 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-08-02 14:58 UTC (permalink / raw)
To: Mark Brown
Cc: Fabio Estevam, Shawn Guo, Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
Dear Mark Brown,
Thanks for the review!
> On Mon, Jul 23, 2012 at 10:40:48PM +0200, Marek Vasut wrote:
> > This is slightly reworked version of the SPI driver.
> > Support for DT has been added and it's been converted
> > to queued API.
>
> Looks reasonable overall.
>
> > + bits_per_word = dev->bits_per_word;
> > + if (t && t->bits_per_word)
> > + bits_per_word = t->bits_per_word;
> > +
> > + if (bits_per_word != 8) {
> > + dev_err(&dev->dev, "%s, unsupported bits_per_word=%d\n",
> > + __func__, bits_per_word);
> > + return -EINVAL;
> > + }
> >
> > + if (dev->max_speed_hz)
> > + hz = dev->max_speed_hz;
> > + if (t && t->speed_hz)
> > + hz = t->speed_hz;
> > + if (hz == 0) {
> > + dev_err(&dev->dev, "Cannot continue with zero clock\n");
> > + return -EINVAL;
> > + }
>
> These two blocks use a different style (the first does the first assign
> unconditionally, the second uses initialisation with declaration). I
> prefer the first style but YMMV and it doesn't matter.
>
> For the missing clock rate might it make sense to just use whatever the
> clock happens to come out as?
Hm, the max_speed_hz should be the cap for the transfer speed. I will change the
function to this:
hz = dev->max_speed_hz;
if (t && t->speed_hz)
hz = min(hz, t->speed_hz);
> > +static void mxs_spi_cleanup(struct spi_device *dev)
> > +{
> > + return;
> > +}
>
> Empty functions are generally a warning sign... why do we need this
> one?
Good catch, thanks!
> > +static int __devexit mxs_spi_remove(struct platform_device *pdev)
> > +{
> >
> > + clk_disable_unprepare(ssp->clk);
>
> It'd be nice to only keep the clocks enabled while doing transfers but
> again totally non-essential.
Hm, this is spread across mxs. Shawn, is there any plan for PM implementation
for MXS ?
Best regards,
Marek Vasut
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread* [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
@ 2012-08-02 14:58 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-08-02 14:58 UTC (permalink / raw)
To: linux-arm-kernel
Dear Mark Brown,
Thanks for the review!
> On Mon, Jul 23, 2012 at 10:40:48PM +0200, Marek Vasut wrote:
> > This is slightly reworked version of the SPI driver.
> > Support for DT has been added and it's been converted
> > to queued API.
>
> Looks reasonable overall.
>
> > + bits_per_word = dev->bits_per_word;
> > + if (t && t->bits_per_word)
> > + bits_per_word = t->bits_per_word;
> > +
> > + if (bits_per_word != 8) {
> > + dev_err(&dev->dev, "%s, unsupported bits_per_word=%d\n",
> > + __func__, bits_per_word);
> > + return -EINVAL;
> > + }
> >
> > + if (dev->max_speed_hz)
> > + hz = dev->max_speed_hz;
> > + if (t && t->speed_hz)
> > + hz = t->speed_hz;
> > + if (hz == 0) {
> > + dev_err(&dev->dev, "Cannot continue with zero clock\n");
> > + return -EINVAL;
> > + }
>
> These two blocks use a different style (the first does the first assign
> unconditionally, the second uses initialisation with declaration). I
> prefer the first style but YMMV and it doesn't matter.
>
> For the missing clock rate might it make sense to just use whatever the
> clock happens to come out as?
Hm, the max_speed_hz should be the cap for the transfer speed. I will change the
function to this:
hz = dev->max_speed_hz;
if (t && t->speed_hz)
hz = min(hz, t->speed_hz);
> > +static void mxs_spi_cleanup(struct spi_device *dev)
> > +{
> > + return;
> > +}
>
> Empty functions are generally a warning sign... why do we need this
> one?
Good catch, thanks!
> > +static int __devexit mxs_spi_remove(struct platform_device *pdev)
> > +{
> >
> > + clk_disable_unprepare(ssp->clk);
>
> It'd be nice to only keep the clocks enabled while doing transfers but
> again totally non-essential.
Hm, this is spread across mxs. Shawn, is there any plan for PM implementation
for MXS ?
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 62+ messages in thread[parent not found: <201208021658.38237.marex-ynQEQJNshbs@public.gmane.org>]
* Re: [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
2012-08-02 14:58 ` Marek Vasut
@ 2012-08-02 16:00 ` Mark Brown
-1 siblings, 0 replies; 62+ messages in thread
From: Mark Brown @ 2012-08-02 16:00 UTC (permalink / raw)
To: Marek Vasut
Cc: Fabio Estevam, Shawn Guo, Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
On Thu, Aug 02, 2012 at 04:58:38PM +0200, Marek Vasut wrote:
> > It'd be nice to only keep the clocks enabled while doing transfers but
> > again totally non-essential.
> Hm, this is spread across mxs. Shawn, is there any plan for PM implementation
> for MXS ?
Take a look at s3c64xx - I did something with runtime PM for this, it's
something that can reasonably be implemented in drivers and as far as I
can tell most framework implementations end up using runtime PM anyway.
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
@ 2012-08-02 16:00 ` Mark Brown
0 siblings, 0 replies; 62+ messages in thread
From: Mark Brown @ 2012-08-02 16:00 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Aug 02, 2012 at 04:58:38PM +0200, Marek Vasut wrote:
> > It'd be nice to only keep the clocks enabled while doing transfers but
> > again totally non-essential.
> Hm, this is spread across mxs. Shawn, is there any plan for PM implementation
> for MXS ?
Take a look at s3c64xx - I did something with runtime PM for this, it's
something that can reasonably be implemented in drivers and as far as I
can tell most framework implementations end up using runtime PM anyway.
^ permalink raw reply [flat|nested] 62+ messages in thread
[parent not found: <20120802160016.GA4537-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>]
* Re: [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
2012-08-02 16:00 ` Mark Brown
@ 2012-08-02 16:03 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-08-02 16:03 UTC (permalink / raw)
To: Mark Brown
Cc: Fabio Estevam, Shawn Guo, Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
Dear Mark Brown,
> On Thu, Aug 02, 2012 at 04:58:38PM +0200, Marek Vasut wrote:
> > > It'd be nice to only keep the clocks enabled while doing transfers but
> > > again totally non-essential.
> >
> > Hm, this is spread across mxs. Shawn, is there any plan for PM
> > implementation for MXS ?
>
> Take a look at s3c64xx - I did something with runtime PM for this, it's
> something that can reasonably be implemented in drivers and as far as I
> can tell most framework implementations end up using runtime PM anyway.
We don't even support runtime pm on mxs yet IIRC
Best regards,
Marek Vasut
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
@ 2012-08-02 16:03 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-08-02 16:03 UTC (permalink / raw)
To: linux-arm-kernel
Dear Mark Brown,
> On Thu, Aug 02, 2012 at 04:58:38PM +0200, Marek Vasut wrote:
> > > It'd be nice to only keep the clocks enabled while doing transfers but
> > > again totally non-essential.
> >
> > Hm, this is spread across mxs. Shawn, is there any plan for PM
> > implementation for MXS ?
>
> Take a look at s3c64xx - I did something with runtime PM for this, it's
> something that can reasonably be implemented in drivers and as far as I
> can tell most framework implementations end up using runtime PM anyway.
We don't even support runtime pm on mxs yet IIRC
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
2012-08-02 14:58 ` Marek Vasut
@ 2012-08-03 1:29 ` Shawn Guo
-1 siblings, 0 replies; 62+ messages in thread
From: Shawn Guo @ 2012-08-03 1:29 UTC (permalink / raw)
To: Marek Vasut
Cc: Fabio Estevam, Mark Brown, Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
On Thu, Aug 02, 2012 at 04:58:38PM +0200, Marek Vasut wrote:
> Hm, this is spread across mxs. Shawn, is there any plan for PM implementation
> for MXS ?
>
Near term, no. Long term, yes.
--
Regards,
Shawn
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
2012-07-23 20:40 ` Marek Vasut
@ 2012-08-03 13:38 ` Thomas Petazzoni
-1 siblings, 0 replies; 62+ messages in thread
From: Thomas Petazzoni @ 2012-08-03 13:38 UTC (permalink / raw)
To: Marek Vasut
Cc: Fabio Estevam, Chris Ball, Mark Brown, Attila Kinali, Dong,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Shawn Guo,
Aisheng, Linux ARM kernel
Marek,
Le Mon, 23 Jul 2012 22:40:48 +0200,
Marek Vasut <marex@denx.de> a écrit :
> +static uint32_t mxs_spi_cs_to_reg(unsigned cs)
> +{
> + uint32_t select = 0;
> +
> + if (cs & 1)
> + select |= BM_SSP_CTRL0_WAIT_FOR_CMD;
> + if (cs & 2)
> + select |= BM_SSP_CTRL0_WAIT_FOR_IRQ;
> +
> + return select;
> +}
It sounds really strange to manipulate WAIT_FOR_CMD and WAIT_FOR_IRQ
bits to adjust the chip select, and when reading the driver, it seemed
suspicious to me. After going through the datasheet, indeed those bits
are the appropriate one to select between the SS0, SS1 and SS2 chip
selects, but I find the code not really obvious. Would it be possible
to make it more obvious either by adding or comment or doing something
like:
/* Should be put in some header file */
#define BM_SSP_CTRL0_SPI_CS_BITS (20)
+static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
+{
+ struct mxs_ssp *ssp = &spi->ssp;
+
+ writel(0x3 << BM_SSP_CTRL0_SPI_CS_BITS,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ writel(cs,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+}
Regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
spi-devel-general mailing list
spi-devel-general@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/spi-devel-general
^ permalink raw reply [flat|nested] 62+ messages in thread* [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
@ 2012-08-03 13:38 ` Thomas Petazzoni
0 siblings, 0 replies; 62+ messages in thread
From: Thomas Petazzoni @ 2012-08-03 13:38 UTC (permalink / raw)
To: linux-arm-kernel
Marek,
Le Mon, 23 Jul 2012 22:40:48 +0200,
Marek Vasut <marex@denx.de> a ?crit :
> +static uint32_t mxs_spi_cs_to_reg(unsigned cs)
> +{
> + uint32_t select = 0;
> +
> + if (cs & 1)
> + select |= BM_SSP_CTRL0_WAIT_FOR_CMD;
> + if (cs & 2)
> + select |= BM_SSP_CTRL0_WAIT_FOR_IRQ;
> +
> + return select;
> +}
It sounds really strange to manipulate WAIT_FOR_CMD and WAIT_FOR_IRQ
bits to adjust the chip select, and when reading the driver, it seemed
suspicious to me. After going through the datasheet, indeed those bits
are the appropriate one to select between the SS0, SS1 and SS2 chip
selects, but I find the code not really obvious. Would it be possible
to make it more obvious either by adding or comment or doing something
like:
/* Should be put in some header file */
#define BM_SSP_CTRL0_SPI_CS_BITS (20)
+static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
+{
+ struct mxs_ssp *ssp = &spi->ssp;
+
+ writel(0x3 << BM_SSP_CTRL0_SPI_CS_BITS,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
+ writel(cs,
+ ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
+}
Regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 62+ messages in thread* Re: [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
2012-08-03 13:38 ` Thomas Petazzoni
@ 2012-08-03 13:46 ` Fabio Estevam
-1 siblings, 0 replies; 62+ messages in thread
From: Fabio Estevam @ 2012-08-03 13:46 UTC (permalink / raw)
To: Thomas Petazzoni
Cc: Marek Vasut, Fabio Estevam, Shawn Guo, Mark Brown, Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
On Fri, Aug 3, 2012 at 10:38 AM, Thomas Petazzoni
<thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:
>
> It sounds really strange to manipulate WAIT_FOR_CMD and WAIT_FOR_IRQ
> bits to adjust the chip select, and when reading the driver, it seemed
> suspicious to me. After going through the datasheet, indeed those bits
> are the appropriate one to select between the SS0, SS1 and SS2 chip
> selects, but I find the code not really obvious. Would it be possible
> to make it more obvious either by adding or comment or doing something
> like:
>
> /* Should be put in some header file */
> #define BM_SSP_CTRL0_SPI_CS_BITS (20)
>
> +static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
> +{
> + struct mxs_ssp *ssp = &spi->ssp;
> +
> + writel(0x3 << BM_SSP_CTRL0_SPI_CS_BITS,
> + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
> + writel(cs,
> + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
> +}
I agree with Thomas.
In U-boot I did the following in order to be able to select the
different chip selects:
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=148ca64f327a89ef77e84756f5d351af33e59b64
Thanks,
Fabio Estevam
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread* [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
@ 2012-08-03 13:46 ` Fabio Estevam
0 siblings, 0 replies; 62+ messages in thread
From: Fabio Estevam @ 2012-08-03 13:46 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Aug 3, 2012 at 10:38 AM, Thomas Petazzoni
<thomas.petazzoni@free-electrons.com> wrote:
>
> It sounds really strange to manipulate WAIT_FOR_CMD and WAIT_FOR_IRQ
> bits to adjust the chip select, and when reading the driver, it seemed
> suspicious to me. After going through the datasheet, indeed those bits
> are the appropriate one to select between the SS0, SS1 and SS2 chip
> selects, but I find the code not really obvious. Would it be possible
> to make it more obvious either by adding or comment or doing something
> like:
>
> /* Should be put in some header file */
> #define BM_SSP_CTRL0_SPI_CS_BITS (20)
>
> +static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
> +{
> + struct mxs_ssp *ssp = &spi->ssp;
> +
> + writel(0x3 << BM_SSP_CTRL0_SPI_CS_BITS,
> + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
> + writel(cs,
> + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
> +}
I agree with Thomas.
In U-boot I did the following in order to be able to select the
different chip selects:
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=148ca64f327a89ef77e84756f5d351af33e59b64
Thanks,
Fabio Estevam
^ permalink raw reply [flat|nested] 62+ messages in thread[parent not found: <CAOMZO5AQs1NzJBogcLPcKtY=QSaxpDmzUTvpfScY7P10FEoMJw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
2012-08-03 13:46 ` Fabio Estevam
@ 2012-08-03 13:49 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-08-03 13:49 UTC (permalink / raw)
To: Fabio Estevam
Cc: Thomas Petazzoni, Fabio Estevam, Shawn Guo, Mark Brown,
Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
Dear Fabio Estevam,
> On Fri, Aug 3, 2012 at 10:38 AM, Thomas Petazzoni
>
> <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:
> > It sounds really strange to manipulate WAIT_FOR_CMD and WAIT_FOR_IRQ
> > bits to adjust the chip select, and when reading the driver, it seemed
> > suspicious to me. After going through the datasheet, indeed those bits
> > are the appropriate one to select between the SS0, SS1 and SS2 chip
> > selects, but I find the code not really obvious. Would it be possible
> > to make it more obvious either by adding or comment or doing something
> > like:
> >
> > /* Should be put in some header file */
> > #define BM_SSP_CTRL0_SPI_CS_BITS (20)
> >
> > +static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
> > +{
> > + struct mxs_ssp *ssp = &spi->ssp;
> > +
> > + writel(0x3 << BM_SSP_CTRL0_SPI_CS_BITS,
> > + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
> > + writel(cs,
> > + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
> > +}
>
> I agree with Thomas.
>
> In U-boot I did the following in order to be able to select the
> different chip selects:
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=148ca64f327a89ef77e84756f5d
> 351af33e59b64
Good thing I waited with submission :)
I'll fix it in a bit and resubmit in the evening.
> Thanks,
>
> Fabio Estevam
Best regards,
Marek Vasut
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread* [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
@ 2012-08-03 13:49 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-08-03 13:49 UTC (permalink / raw)
To: linux-arm-kernel
Dear Fabio Estevam,
> On Fri, Aug 3, 2012 at 10:38 AM, Thomas Petazzoni
>
> <thomas.petazzoni@free-electrons.com> wrote:
> > It sounds really strange to manipulate WAIT_FOR_CMD and WAIT_FOR_IRQ
> > bits to adjust the chip select, and when reading the driver, it seemed
> > suspicious to me. After going through the datasheet, indeed those bits
> > are the appropriate one to select between the SS0, SS1 and SS2 chip
> > selects, but I find the code not really obvious. Would it be possible
> > to make it more obvious either by adding or comment or doing something
> > like:
> >
> > /* Should be put in some header file */
> > #define BM_SSP_CTRL0_SPI_CS_BITS (20)
> >
> > +static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
> > +{
> > + struct mxs_ssp *ssp = &spi->ssp;
> > +
> > + writel(0x3 << BM_SSP_CTRL0_SPI_CS_BITS,
> > + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
> > + writel(cs,
> > + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
> > +}
>
> I agree with Thomas.
>
> In U-boot I did the following in order to be able to select the
> different chip selects:
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=148ca64f327a89ef77e84756f5d
> 351af33e59b64
Good thing I waited with submission :)
I'll fix it in a bit and resubmit in the evening.
> Thanks,
>
> Fabio Estevam
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
2012-08-03 13:46 ` Fabio Estevam
@ 2012-08-03 14:00 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-08-03 14:00 UTC (permalink / raw)
To: Fabio Estevam
Cc: Thomas Petazzoni, Fabio Estevam, Shawn Guo, Mark Brown,
Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
Dear Fabio Estevam,
> On Fri, Aug 3, 2012 at 10:38 AM, Thomas Petazzoni
>
> <thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:
> > It sounds really strange to manipulate WAIT_FOR_CMD and WAIT_FOR_IRQ
> > bits to adjust the chip select, and when reading the driver, it seemed
> > suspicious to me. After going through the datasheet, indeed those bits
> > are the appropriate one to select between the SS0, SS1 and SS2 chip
> > selects, but I find the code not really obvious. Would it be possible
> > to make it more obvious either by adding or comment or doing something
> > like:
> >
> > /* Should be put in some header file */
> > #define BM_SSP_CTRL0_SPI_CS_BITS (20)
> >
> > +static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
> > +{
> > + struct mxs_ssp *ssp = &spi->ssp;
> > +
> > + writel(0x3 << BM_SSP_CTRL0_SPI_CS_BITS,
> > + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
> > + writel(cs,
> > + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
> > +}
>
> I agree with Thomas.
>
> In U-boot I did the following in order to be able to select the
> different chip selects:
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=148ca64f327a89ef77e84756f5d
> 351af33e59b64
I'll just add the following comment if it's ok with you:
/*
* i.MX28 Datasheet: 17.10.1: HW_SSP_CTRL0
*
* The bits BM_SSP_CTRL0_WAIT_FOR_CMD and BM_SSP_CTRL0_WAIT_FOR_IRQ
* in HW_SSP_CTRL0 register do have multiple usage, please refer to
* the datasheet for further details. In SPI mode, they are used to
* toggle the chip-select lines (nCS pins).
*/
I hope it'll suffice. Recycling bits in registers is really crazy practice and
I'd like to avoid these getting out of scope of this flaw's location.
> Thanks,
>
> Fabio Estevam
Best regards,
Marek Vasut
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread* [PATCH 06/10 V2] spi: Add SPI driver for mx233/mx28
@ 2012-08-03 14:00 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-08-03 14:00 UTC (permalink / raw)
To: linux-arm-kernel
Dear Fabio Estevam,
> On Fri, Aug 3, 2012 at 10:38 AM, Thomas Petazzoni
>
> <thomas.petazzoni@free-electrons.com> wrote:
> > It sounds really strange to manipulate WAIT_FOR_CMD and WAIT_FOR_IRQ
> > bits to adjust the chip select, and when reading the driver, it seemed
> > suspicious to me. After going through the datasheet, indeed those bits
> > are the appropriate one to select between the SS0, SS1 and SS2 chip
> > selects, but I find the code not really obvious. Would it be possible
> > to make it more obvious either by adding or comment or doing something
> > like:
> >
> > /* Should be put in some header file */
> > #define BM_SSP_CTRL0_SPI_CS_BITS (20)
> >
> > +static void mxs_spi_set_cs(struct mxs_spi *spi, unsigned cs)
> > +{
> > + struct mxs_ssp *ssp = &spi->ssp;
> > +
> > + writel(0x3 << BM_SSP_CTRL0_SPI_CS_BITS,
> > + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
> > + writel(cs,
> > + ssp->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
> > +}
>
> I agree with Thomas.
>
> In U-boot I did the following in order to be able to select the
> different chip selects:
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=148ca64f327a89ef77e84756f5d
> 351af33e59b64
I'll just add the following comment if it's ok with you:
/*
* i.MX28 Datasheet: 17.10.1: HW_SSP_CTRL0
*
* The bits BM_SSP_CTRL0_WAIT_FOR_CMD and BM_SSP_CTRL0_WAIT_FOR_IRQ
* in HW_SSP_CTRL0 register do have multiple usage, please refer to
* the datasheet for further details. In SPI mode, they are used to
* toggle the chip-select lines (nCS pins).
*/
I hope it'll suffice. Recycling bits in registers is really crazy practice and
I'd like to avoid these getting out of scope of this flaw's location.
> Thanks,
>
> Fabio Estevam
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 07/10 RESEND] mmc: spi: Pull out common DMA parts from MXS MMC
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-23 20:40 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Cc: Marek Vasut, Fabio Estevam, Shawn Guo, Mark Brown, Attila Kinali,
Chris Ball, Dong Aisheng, Linux ARM kernel
These parts will be used by the MXS SPI driver too.
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
drivers/mmc/host/mxs-mmc.c | 88 +++++++++++++++++++++----------------------
drivers/spi/spi-mxs.c | 1 -
include/linux/spi/mxs-spi.h | 9 +++++
3 files changed, 51 insertions(+), 47 deletions(-)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 0813340..4da9966 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -41,7 +41,6 @@
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
-#include <linux/fsl/mxs-dma.h>
#include <linux/pinctrl/consumer.h>
#include <linux/stmp_device.h>
#include <linux/mmc/mxs-mmc.h>
@@ -69,13 +68,6 @@ struct mxs_mmc_host {
struct mmc_command *cmd;
struct mmc_data *data;
- int dma_channel;
- struct dma_chan *dmach;
- struct mxs_dma_data dma_data;
- unsigned int dma_dir;
- enum dma_transfer_direction slave_dirn;
- u32 ssp_pio_words[SSP_PIO_NUM];
-
unsigned char bus_width;
spinlock_t lock;
int sdio_irq_en;
@@ -163,7 +155,7 @@ static void mxs_mmc_request_done(struct mxs_mmc_host *host)
if (data) {
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
- data->sg_len, host->dma_dir);
+ data->sg_len, ssp->dma_dir);
/*
* If there was an error on any block, we mark all
* data blocks as being in error.
@@ -232,6 +224,7 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
struct mxs_mmc_host *host, unsigned long flags)
{
+ struct mxs_ssp *ssp = &host->ssp;
struct dma_async_tx_descriptor *desc;
struct mmc_data *data = host->data;
struct scatterlist * sgl;
@@ -240,24 +233,24 @@ static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
if (data) {
/* data */
dma_map_sg(mmc_dev(host->mmc), data->sg,
- data->sg_len, host->dma_dir);
+ data->sg_len, ssp->dma_dir);
sgl = data->sg;
sg_len = data->sg_len;
} else {
/* pio */
- sgl = (struct scatterlist *) host->ssp_pio_words;
+ sgl = (struct scatterlist *) ssp->ssp_pio_words;
sg_len = SSP_PIO_NUM;
}
- desc = dmaengine_prep_slave_sg(host->dmach,
- sgl, sg_len, host->slave_dirn, flags);
+ desc = dmaengine_prep_slave_sg(ssp->dmach,
+ sgl, sg_len, ssp->slave_dirn, flags);
if (desc) {
desc->callback = mxs_mmc_dma_irq_callback;
desc->callback_param = host;
} else {
if (data)
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
- data->sg_len, host->dma_dir);
+ data->sg_len, ssp->dma_dir);
}
return desc;
@@ -265,6 +258,7 @@ static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
static void mxs_mmc_bc(struct mxs_mmc_host *host)
{
+ struct mxs_ssp *ssp = &host->ssp;
struct mmc_command *cmd = host->cmd;
struct dma_async_tx_descriptor *desc;
u32 ctrl0, cmd0, cmd1;
@@ -278,17 +272,17 @@ static void mxs_mmc_bc(struct mxs_mmc_host *host)
cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
}
- host->ssp_pio_words[0] = ctrl0;
- host->ssp_pio_words[1] = cmd0;
- host->ssp_pio_words[2] = cmd1;
- host->dma_dir = DMA_NONE;
- host->slave_dirn = DMA_TRANS_NONE;
+ ssp->ssp_pio_words[0] = ctrl0;
+ ssp->ssp_pio_words[1] = cmd0;
+ ssp->ssp_pio_words[2] = cmd1;
+ ssp->dma_dir = DMA_NONE;
+ ssp->slave_dirn = DMA_TRANS_NONE;
desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
if (!desc)
goto out;
dmaengine_submit(desc);
- dma_async_issue_pending(host->dmach);
+ dma_async_issue_pending(ssp->dmach);
return;
out:
@@ -298,6 +292,7 @@ out:
static void mxs_mmc_ac(struct mxs_mmc_host *host)
{
+ struct mxs_ssp *ssp = &host->ssp;
struct mmc_command *cmd = host->cmd;
struct dma_async_tx_descriptor *desc;
u32 ignore_crc, get_resp, long_resp;
@@ -319,17 +314,17 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host)
cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
}
- host->ssp_pio_words[0] = ctrl0;
- host->ssp_pio_words[1] = cmd0;
- host->ssp_pio_words[2] = cmd1;
- host->dma_dir = DMA_NONE;
- host->slave_dirn = DMA_TRANS_NONE;
+ ssp->ssp_pio_words[0] = ctrl0;
+ ssp->ssp_pio_words[1] = cmd0;
+ ssp->ssp_pio_words[2] = cmd1;
+ ssp->dma_dir = DMA_NONE;
+ ssp->slave_dirn = DMA_TRANS_NONE;
desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
if (!desc)
goto out;
dmaengine_submit(desc);
- dma_async_issue_pending(host->dmach);
+ dma_async_issue_pending(ssp->dmach);
return;
out:
@@ -441,11 +436,11 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
writel(val, ssp->base + HW_SSP_TIMING(ssp));
/* pio */
- host->ssp_pio_words[0] = ctrl0;
- host->ssp_pio_words[1] = cmd0;
- host->ssp_pio_words[2] = cmd1;
- host->dma_dir = DMA_NONE;
- host->slave_dirn = DMA_TRANS_NONE;
+ ssp->ssp_pio_words[0] = ctrl0;
+ ssp->ssp_pio_words[1] = cmd0;
+ ssp->ssp_pio_words[2] = cmd1;
+ ssp->dma_dir = DMA_NONE;
+ ssp->slave_dirn = DMA_TRANS_NONE;
desc = mxs_mmc_prep_dma(host, 0);
if (!desc)
goto out;
@@ -453,14 +448,14 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
/* append data sg */
WARN_ON(host->data != NULL);
host->data = data;
- host->dma_dir = dma_data_dir;
- host->slave_dirn = slave_dirn;
+ ssp->dma_dir = dma_data_dir;
+ ssp->slave_dirn = slave_dirn;
desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc)
goto out;
dmaengine_submit(desc);
- dma_async_issue_pending(host->dmach);
+ dma_async_issue_pending(ssp->dmach);
return;
out:
dev_warn(mmc_dev(host->mmc),
@@ -557,14 +552,15 @@ static const struct mmc_host_ops mxs_mmc_ops = {
static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param)
{
struct mxs_mmc_host *host = param;
+ struct mxs_ssp *ssp = &host->ssp;
if (!mxs_dma_is_apbh(chan))
return false;
- if (chan->chan_id != host->dma_channel)
+ if (chan->chan_id != ssp->dma_channel)
return false;
- chan->private = &host->dma_data;
+ chan->private = &ssp->dma_data;
return true;
}
@@ -632,7 +628,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
* to use generic DMA binding later when the helpers get in.
*/
ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
- &host->dma_channel);
+ &ssp->dma_channel);
if (ret) {
dev_err(mmc_dev(host->mmc),
"failed to get dma channel\n");
@@ -640,7 +636,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
}
} else {
ssp->devid = pdev->id_entry->driver_data;
- host->dma_channel = dmares->start;
+ ssp->dma_channel = dmares->start;
}
host->mmc = mmc;
@@ -673,9 +669,9 @@ static int mxs_mmc_probe(struct platform_device *pdev)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- host->dma_data.chan_irq = irq_dma;
- host->dmach = dma_request_channel(mask, mxs_mmc_dma_filter, host);
- if (!host->dmach) {
+ ssp->dma_data.chan_irq = irq_dma;
+ ssp->dmach = dma_request_channel(mask, mxs_mmc_dma_filter, host);
+ if (!ssp->dmach) {
dev_err(mmc_dev(host->mmc),
"%s: failed to request dma\n", __func__);
goto out_clk_put;
@@ -714,7 +710,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
mmc->max_blk_size = 1 << 0xf;
mmc->max_blk_count = (ssp_is_old(ssp)) ? 0xff : 0xffffff;
mmc->max_req_size = (ssp_is_old(ssp)) ? 0xffff : 0xffffffff;
- mmc->max_seg_size = dma_get_max_seg_size(host->dmach->device->dev);
+ mmc->max_seg_size = dma_get_max_seg_size(ssp->dmach->device->dev);
platform_set_drvdata(pdev, mmc);
@@ -734,8 +730,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
return 0;
out_free_dma:
- if (host->dmach)
- dma_release_channel(host->dmach);
+ if (ssp->dmach)
+ dma_release_channel(ssp->dmach);
out_clk_put:
clk_disable_unprepare(ssp->clk);
clk_put(ssp->clk);
@@ -754,8 +750,8 @@ static int mxs_mmc_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
- if (host->dmach)
- dma_release_channel(host->dmach);
+ if (ssp->dmach)
+ dma_release_channel(ssp->dmach);
clk_disable_unprepare(ssp->clk);
clk_put(ssp->clk);
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index dce986c..bd2f2fd 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -46,7 +46,6 @@
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
-#include <linux/fsl/mxs-dma.h>
#include <linux/pinctrl/consumer.h>
#include <linux/stmp_device.h>
#include <linux/spi/spi.h>
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index d07f8dc..61ae130 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -24,6 +24,8 @@
#ifndef __LINUX_SPI_MXS_SPI_H__
#define __LINUX_SPI_MXS_SPI_H__
+#include <linux/fsl/mxs-dma.h>
+
#define ssp_is_old(host) ((host)->devid == IMX23_SSP)
/* SSP registers */
@@ -134,6 +136,13 @@ struct mxs_ssp {
struct clk *clk;
unsigned int clk_rate;
enum mxs_ssp_id devid;
+
+ int dma_channel;
+ struct dma_chan *dmach;
+ struct mxs_dma_data dma_data;
+ unsigned int dma_dir;
+ enum dma_transfer_direction slave_dirn;
+ u32 ssp_pio_words[SSP_PIO_NUM];
};
void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);
--
1.7.10.4
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 07/10 RESEND] mmc: spi: Pull out common DMA parts from MXS MMC
@ 2012-07-23 20:40 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: linux-arm-kernel
These parts will be used by the MXS SPI driver too.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
drivers/mmc/host/mxs-mmc.c | 88 +++++++++++++++++++++----------------------
drivers/spi/spi-mxs.c | 1 -
include/linux/spi/mxs-spi.h | 9 +++++
3 files changed, 51 insertions(+), 47 deletions(-)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 0813340..4da9966 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -41,7 +41,6 @@
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
-#include <linux/fsl/mxs-dma.h>
#include <linux/pinctrl/consumer.h>
#include <linux/stmp_device.h>
#include <linux/mmc/mxs-mmc.h>
@@ -69,13 +68,6 @@ struct mxs_mmc_host {
struct mmc_command *cmd;
struct mmc_data *data;
- int dma_channel;
- struct dma_chan *dmach;
- struct mxs_dma_data dma_data;
- unsigned int dma_dir;
- enum dma_transfer_direction slave_dirn;
- u32 ssp_pio_words[SSP_PIO_NUM];
-
unsigned char bus_width;
spinlock_t lock;
int sdio_irq_en;
@@ -163,7 +155,7 @@ static void mxs_mmc_request_done(struct mxs_mmc_host *host)
if (data) {
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
- data->sg_len, host->dma_dir);
+ data->sg_len, ssp->dma_dir);
/*
* If there was an error on any block, we mark all
* data blocks as being in error.
@@ -232,6 +224,7 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
struct mxs_mmc_host *host, unsigned long flags)
{
+ struct mxs_ssp *ssp = &host->ssp;
struct dma_async_tx_descriptor *desc;
struct mmc_data *data = host->data;
struct scatterlist * sgl;
@@ -240,24 +233,24 @@ static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
if (data) {
/* data */
dma_map_sg(mmc_dev(host->mmc), data->sg,
- data->sg_len, host->dma_dir);
+ data->sg_len, ssp->dma_dir);
sgl = data->sg;
sg_len = data->sg_len;
} else {
/* pio */
- sgl = (struct scatterlist *) host->ssp_pio_words;
+ sgl = (struct scatterlist *) ssp->ssp_pio_words;
sg_len = SSP_PIO_NUM;
}
- desc = dmaengine_prep_slave_sg(host->dmach,
- sgl, sg_len, host->slave_dirn, flags);
+ desc = dmaengine_prep_slave_sg(ssp->dmach,
+ sgl, sg_len, ssp->slave_dirn, flags);
if (desc) {
desc->callback = mxs_mmc_dma_irq_callback;
desc->callback_param = host;
} else {
if (data)
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
- data->sg_len, host->dma_dir);
+ data->sg_len, ssp->dma_dir);
}
return desc;
@@ -265,6 +258,7 @@ static struct dma_async_tx_descriptor *mxs_mmc_prep_dma(
static void mxs_mmc_bc(struct mxs_mmc_host *host)
{
+ struct mxs_ssp *ssp = &host->ssp;
struct mmc_command *cmd = host->cmd;
struct dma_async_tx_descriptor *desc;
u32 ctrl0, cmd0, cmd1;
@@ -278,17 +272,17 @@ static void mxs_mmc_bc(struct mxs_mmc_host *host)
cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
}
- host->ssp_pio_words[0] = ctrl0;
- host->ssp_pio_words[1] = cmd0;
- host->ssp_pio_words[2] = cmd1;
- host->dma_dir = DMA_NONE;
- host->slave_dirn = DMA_TRANS_NONE;
+ ssp->ssp_pio_words[0] = ctrl0;
+ ssp->ssp_pio_words[1] = cmd0;
+ ssp->ssp_pio_words[2] = cmd1;
+ ssp->dma_dir = DMA_NONE;
+ ssp->slave_dirn = DMA_TRANS_NONE;
desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
if (!desc)
goto out;
dmaengine_submit(desc);
- dma_async_issue_pending(host->dmach);
+ dma_async_issue_pending(ssp->dmach);
return;
out:
@@ -298,6 +292,7 @@ out:
static void mxs_mmc_ac(struct mxs_mmc_host *host)
{
+ struct mxs_ssp *ssp = &host->ssp;
struct mmc_command *cmd = host->cmd;
struct dma_async_tx_descriptor *desc;
u32 ignore_crc, get_resp, long_resp;
@@ -319,17 +314,17 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host)
cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
}
- host->ssp_pio_words[0] = ctrl0;
- host->ssp_pio_words[1] = cmd0;
- host->ssp_pio_words[2] = cmd1;
- host->dma_dir = DMA_NONE;
- host->slave_dirn = DMA_TRANS_NONE;
+ ssp->ssp_pio_words[0] = ctrl0;
+ ssp->ssp_pio_words[1] = cmd0;
+ ssp->ssp_pio_words[2] = cmd1;
+ ssp->dma_dir = DMA_NONE;
+ ssp->slave_dirn = DMA_TRANS_NONE;
desc = mxs_mmc_prep_dma(host, DMA_CTRL_ACK);
if (!desc)
goto out;
dmaengine_submit(desc);
- dma_async_issue_pending(host->dmach);
+ dma_async_issue_pending(ssp->dmach);
return;
out:
@@ -441,11 +436,11 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
writel(val, ssp->base + HW_SSP_TIMING(ssp));
/* pio */
- host->ssp_pio_words[0] = ctrl0;
- host->ssp_pio_words[1] = cmd0;
- host->ssp_pio_words[2] = cmd1;
- host->dma_dir = DMA_NONE;
- host->slave_dirn = DMA_TRANS_NONE;
+ ssp->ssp_pio_words[0] = ctrl0;
+ ssp->ssp_pio_words[1] = cmd0;
+ ssp->ssp_pio_words[2] = cmd1;
+ ssp->dma_dir = DMA_NONE;
+ ssp->slave_dirn = DMA_TRANS_NONE;
desc = mxs_mmc_prep_dma(host, 0);
if (!desc)
goto out;
@@ -453,14 +448,14 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
/* append data sg */
WARN_ON(host->data != NULL);
host->data = data;
- host->dma_dir = dma_data_dir;
- host->slave_dirn = slave_dirn;
+ ssp->dma_dir = dma_data_dir;
+ ssp->slave_dirn = slave_dirn;
desc = mxs_mmc_prep_dma(host, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc)
goto out;
dmaengine_submit(desc);
- dma_async_issue_pending(host->dmach);
+ dma_async_issue_pending(ssp->dmach);
return;
out:
dev_warn(mmc_dev(host->mmc),
@@ -557,14 +552,15 @@ static const struct mmc_host_ops mxs_mmc_ops = {
static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param)
{
struct mxs_mmc_host *host = param;
+ struct mxs_ssp *ssp = &host->ssp;
if (!mxs_dma_is_apbh(chan))
return false;
- if (chan->chan_id != host->dma_channel)
+ if (chan->chan_id != ssp->dma_channel)
return false;
- chan->private = &host->dma_data;
+ chan->private = &ssp->dma_data;
return true;
}
@@ -632,7 +628,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
* to use generic DMA binding later when the helpers get in.
*/
ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
- &host->dma_channel);
+ &ssp->dma_channel);
if (ret) {
dev_err(mmc_dev(host->mmc),
"failed to get dma channel\n");
@@ -640,7 +636,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
}
} else {
ssp->devid = pdev->id_entry->driver_data;
- host->dma_channel = dmares->start;
+ ssp->dma_channel = dmares->start;
}
host->mmc = mmc;
@@ -673,9 +669,9 @@ static int mxs_mmc_probe(struct platform_device *pdev)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- host->dma_data.chan_irq = irq_dma;
- host->dmach = dma_request_channel(mask, mxs_mmc_dma_filter, host);
- if (!host->dmach) {
+ ssp->dma_data.chan_irq = irq_dma;
+ ssp->dmach = dma_request_channel(mask, mxs_mmc_dma_filter, host);
+ if (!ssp->dmach) {
dev_err(mmc_dev(host->mmc),
"%s: failed to request dma\n", __func__);
goto out_clk_put;
@@ -714,7 +710,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
mmc->max_blk_size = 1 << 0xf;
mmc->max_blk_count = (ssp_is_old(ssp)) ? 0xff : 0xffffff;
mmc->max_req_size = (ssp_is_old(ssp)) ? 0xffff : 0xffffffff;
- mmc->max_seg_size = dma_get_max_seg_size(host->dmach->device->dev);
+ mmc->max_seg_size = dma_get_max_seg_size(ssp->dmach->device->dev);
platform_set_drvdata(pdev, mmc);
@@ -734,8 +730,8 @@ static int mxs_mmc_probe(struct platform_device *pdev)
return 0;
out_free_dma:
- if (host->dmach)
- dma_release_channel(host->dmach);
+ if (ssp->dmach)
+ dma_release_channel(ssp->dmach);
out_clk_put:
clk_disable_unprepare(ssp->clk);
clk_put(ssp->clk);
@@ -754,8 +750,8 @@ static int mxs_mmc_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL);
- if (host->dmach)
- dma_release_channel(host->dmach);
+ if (ssp->dmach)
+ dma_release_channel(ssp->dmach);
clk_disable_unprepare(ssp->clk);
clk_put(ssp->clk);
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index dce986c..bd2f2fd 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -46,7 +46,6 @@
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
-#include <linux/fsl/mxs-dma.h>
#include <linux/pinctrl/consumer.h>
#include <linux/stmp_device.h>
#include <linux/spi/spi.h>
diff --git a/include/linux/spi/mxs-spi.h b/include/linux/spi/mxs-spi.h
index d07f8dc..61ae130 100644
--- a/include/linux/spi/mxs-spi.h
+++ b/include/linux/spi/mxs-spi.h
@@ -24,6 +24,8 @@
#ifndef __LINUX_SPI_MXS_SPI_H__
#define __LINUX_SPI_MXS_SPI_H__
+#include <linux/fsl/mxs-dma.h>
+
#define ssp_is_old(host) ((host)->devid == IMX23_SSP)
/* SSP registers */
@@ -134,6 +136,13 @@ struct mxs_ssp {
struct clk *clk;
unsigned int clk_rate;
enum mxs_ssp_id devid;
+
+ int dma_channel;
+ struct dma_chan *dmach;
+ struct mxs_dma_data dma_data;
+ unsigned int dma_dir;
+ enum dma_transfer_direction slave_dirn;
+ u32 ssp_pio_words[SSP_PIO_NUM];
};
void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 08/10 RESEND] spi: Add DMA support into SPI driver
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-23 20:40 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Cc: Marek Vasut, Fabio Estevam, Shawn Guo, Mark Brown, Attila Kinali,
Chris Ball, Dong Aisheng, Linux ARM kernel
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
drivers/spi/spi-mxs.c | 229 +++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 214 insertions(+), 15 deletions(-)
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index bd2f2fd..d6a80a1 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -55,8 +55,12 @@
#define SSP_TIMEOUT 1000 /* 1000 ms */
+#define SG_NUM 4
+#define SG_MAXLEN 0xff00
+
struct mxs_spi {
struct mxs_ssp ssp;
+ struct completion c;
};
static int mxs_spi_setup_transfer(struct spi_device *dev,
@@ -192,6 +196,115 @@ static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set)
return 0;
}
+static void mxs_ssp_dma_irq_callback(void *param)
+{
+ struct mxs_spi *spi = param;
+ complete(&spi->c);
+}
+
+static irqreturn_t mxs_ssp_irq_handler(int irq, void *dev_id)
+{
+ struct mxs_ssp *ssp = dev_id;
+ dev_err(ssp->dev, "%s[%i] CTRL1=%08x STATUS=%08x\n",
+ __func__, __LINE__,
+ readl(ssp->base + HW_SSP_CTRL1(ssp)),
+ readl(ssp->base + HW_SSP_STATUS(ssp)));
+ return IRQ_HANDLED;
+}
+
+static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs,
+ unsigned char *buf, int len,
+ int *first, int *last, int write)
+{
+ struct mxs_ssp *ssp = &spi->ssp;
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist sg[SG_NUM];
+ int sg_count;
+ uint32_t pio = BM_SSP_CTRL0_DATA_XFER | mxs_spi_cs_to_reg(cs);
+ int ret;
+
+ if (len > SG_NUM * SG_MAXLEN) {
+ dev_err(ssp->dev, "Data chunk too big for DMA\n");
+ return -EINVAL;
+ }
+
+ init_completion(&spi->c);
+
+ if (*first)
+ pio |= BM_SSP_CTRL0_LOCK_CS;
+ if (*last)
+ pio |= BM_SSP_CTRL0_IGNORE_CRC;
+ if (!write)
+ pio |= BM_SSP_CTRL0_READ;
+
+ if (ssp->devid == IMX23_SSP)
+ pio |= len;
+ else
+ writel(len, ssp->base + HW_SSP_XFER_SIZE);
+
+ /* Queue the PIO register write transfer. */
+ desc = dmaengine_prep_slave_sg(ssp->dmach,
+ (struct scatterlist *)&pio,
+ 1, DMA_TRANS_NONE, 0);
+ if (!desc) {
+ dev_err(ssp->dev,
+ "Failed to get PIO reg. write descriptor.\n");
+ return -EINVAL;
+ }
+
+ /* Queue the DMA data transfer. */
+ sg_init_table(sg, (len / SG_MAXLEN) + 1);
+ sg_count = 0;
+ while (len) {
+ sg_set_buf(&sg[sg_count++], buf, min(len, SG_MAXLEN));
+ len -= min(len, SG_MAXLEN);
+ buf += min(len, SG_MAXLEN);
+ }
+ dma_map_sg(ssp->dev, sg, sg_count,
+ write ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+ desc = dmaengine_prep_slave_sg(ssp->dmach, sg, sg_count,
+ write ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
+ if (!desc) {
+ dev_err(ssp->dev,
+ "Failed to get DMA data write descriptor.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /*
+ * The last descriptor must have this callback,
+ * to finish the DMA transaction.
+ */
+ desc->callback = mxs_ssp_dma_irq_callback;
+ desc->callback_param = spi;
+
+ /* Start the transfer. */
+ dmaengine_submit(desc);
+ dma_async_issue_pending(ssp->dmach);
+
+ ret = wait_for_completion_timeout(&spi->c,
+ msecs_to_jiffies(SSP_TIMEOUT));
+
+ if (!ret) {
+ dev_err(ssp->dev, "DMA transfer timeout\n");
+ ret = -ETIMEDOUT;
+ goto err;
+ }
+
+ ret = 0;
+
+err:
+ for (--sg_count; sg_count >= 0; sg_count--) {
+ dma_unmap_sg(ssp->dev, &sg[sg_count], 1,
+ write ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ }
+
+ return ret;
+}
+
static int mxs_spi_txrx_pio(struct mxs_spi *spi, int cs,
unsigned char *buf, int len,
int *first, int *last, int write)
@@ -277,18 +390,48 @@ static int mxs_spi_transfer_one(struct spi_master *master,
first = 1;
if (&t->transfer_list == m->transfers.prev)
last = 1;
- if (t->rx_buf && t->tx_buf) {
+ if ((t->rx_buf && t->tx_buf) || (t->rx_dma && t->tx_dma)) {
dev_err(ssp->dev,
"Cannot send and receive simultaneously\n");
return -EINVAL;
}
- if (t->tx_buf)
- status = mxs_spi_txrx_pio(spi, cs, (void *)t->tx_buf,
- t->len, &first, &last, 1);
- if (t->rx_buf)
- status = mxs_spi_txrx_pio(spi, cs, t->rx_buf,
- t->len, &first, &last, 0);
+ /*
+ * Small blocks can be transfered via PIO.
+ * Measured by empiric means:
+ *
+ * dd if=/dev/mtdblock0 of=/dev/null bs=1024k count=1
+ *
+ * DMA only: 2.164808 seconds, 473.0KB/s
+ * Combined: 1.676276 seconds, 610.9KB/s
+ */
+ if (t->len <= 256) {
+ writel(BM_SSP_CTRL1_DMA_ENABLE,
+ ssp->base + HW_SSP_CTRL1(ssp) +
+ STMP_OFFSET_REG_CLR);
+
+ if (t->tx_buf)
+ status = mxs_spi_txrx_pio(spi, cs,
+ (void *)t->tx_buf,
+ t->len, &first, &last, 1);
+ if (t->rx_buf)
+ status = mxs_spi_txrx_pio(spi, cs,
+ t->rx_buf, t->len,
+ &first, &last, 0);
+ } else {
+ writel(BM_SSP_CTRL1_DMA_ENABLE,
+ ssp->base + HW_SSP_CTRL1(ssp) +
+ STMP_OFFSET_REG_SET);
+
+ if (t->tx_buf)
+ status = mxs_spi_txrx_dma(spi, cs,
+ (void *)t->tx_buf, t->len,
+ &first, &last, 1);
+ if (t->rx_buf)
+ status = mxs_spi_txrx_dma(spi, cs,
+ t->rx_buf, t->len,
+ &first, &last, 0);
+ }
m->actual_length += t->len;
if (status)
@@ -303,6 +446,21 @@ static int mxs_spi_transfer_one(struct spi_master *master,
return status;
}
+static bool mxs_ssp_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct mxs_ssp *ssp = param;
+
+ if (!mxs_dma_is_apbh(chan))
+ return false;
+
+ if (chan->chan_id != ssp->dma_channel)
+ return false;
+
+ chan->private = &ssp->dma_data;
+
+ return true;
+}
+
static const struct of_device_id mxs_spi_dt_ids[] = {
{ .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, },
{ .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, },
@@ -318,15 +476,18 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
struct spi_master *master;
struct mxs_spi *spi;
struct mxs_ssp *ssp;
- struct resource *iores;
+ struct resource *iores, *dmares;
struct pinctrl *pinctrl;
struct clk *clk;
void __iomem *base;
- int devid;
- int ret = 0;
+ int devid, dma_channel;
+ int ret = 0, irq_err, irq_dma;
+ dma_cap_mask_t mask;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!iores)
+ irq_err = platform_get_irq(pdev, 0);
+ irq_dma = platform_get_irq(pdev, 1);
+ if (!iores || irq_err < 0 || irq_dma < 0)
return -EINVAL;
base = devm_request_and_ioremap(&pdev->dev, iores);
@@ -341,10 +502,26 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
if (IS_ERR(clk))
return PTR_ERR(clk);
- if (np)
+ if (np) {
devid = (enum mxs_ssp_id) of_id->data;
- else
+ /*
+ * TODO: This is a temporary solution and should be changed
+ * to use generic DMA binding later when the helpers get in.
+ */
+ ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
+ &dma_channel);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to get DMA channel\n");
+ return -EINVAL;
+ }
+ } else {
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!dmares)
+ return -EINVAL;
devid = pdev->id_entry->driver_data;
+ dma_channel = dmares->start;
+ }
master = spi_alloc_master(&pdev->dev, sizeof(*spi));
if (!master)
@@ -364,8 +541,28 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
ssp->clk = clk;
ssp->base = base;
ssp->devid = devid;
+ ssp->dma_channel = dma_channel;
+
+ ret = devm_request_irq(&pdev->dev, irq_err, mxs_ssp_irq_handler, 0,
+ DRIVER_NAME, ssp);
+ if (ret)
+ goto out_master_free;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ ssp->dma_data.chan_irq = irq_dma;
+ ssp->dmach = dma_request_channel(mask, mxs_ssp_dma_filter, ssp);
+ if (!ssp->dmach) {
+ dev_err(ssp->dev, "Failed to request DMA\n");
+ goto out_master_free;
+ }
+ /*
+ * Crank up the clock to 120MHz, this will be further divided onto a
+ * proper speed.
+ */
clk_prepare_enable(ssp->clk);
+ clk_set_rate(ssp->clk, 120 * 1000 * 1000);
ssp->clk_rate = clk_get_rate(ssp->clk) / 1000;
stmp_reset_block(ssp->base);
@@ -375,13 +572,15 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
ret = spi_register_master(master);
if (ret) {
dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret);
- goto out_master_free;
+ goto out_free_dma;
}
return 0;
-out_master_free:
+out_free_dma:
+ dma_release_channel(ssp->dmach);
clk_disable_unprepare(ssp->clk);
+out_master_free:
spi_master_put(master);
kfree(master);
return ret;
--
1.7.10.4
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 08/10 RESEND] spi: Add DMA support into SPI driver
@ 2012-07-23 20:40 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
drivers/spi/spi-mxs.c | 229 +++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 214 insertions(+), 15 deletions(-)
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index bd2f2fd..d6a80a1 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -55,8 +55,12 @@
#define SSP_TIMEOUT 1000 /* 1000 ms */
+#define SG_NUM 4
+#define SG_MAXLEN 0xff00
+
struct mxs_spi {
struct mxs_ssp ssp;
+ struct completion c;
};
static int mxs_spi_setup_transfer(struct spi_device *dev,
@@ -192,6 +196,115 @@ static int mxs_ssp_wait(struct mxs_spi *spi, int offset, int mask, bool set)
return 0;
}
+static void mxs_ssp_dma_irq_callback(void *param)
+{
+ struct mxs_spi *spi = param;
+ complete(&spi->c);
+}
+
+static irqreturn_t mxs_ssp_irq_handler(int irq, void *dev_id)
+{
+ struct mxs_ssp *ssp = dev_id;
+ dev_err(ssp->dev, "%s[%i] CTRL1=%08x STATUS=%08x\n",
+ __func__, __LINE__,
+ readl(ssp->base + HW_SSP_CTRL1(ssp)),
+ readl(ssp->base + HW_SSP_STATUS(ssp)));
+ return IRQ_HANDLED;
+}
+
+static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs,
+ unsigned char *buf, int len,
+ int *first, int *last, int write)
+{
+ struct mxs_ssp *ssp = &spi->ssp;
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist sg[SG_NUM];
+ int sg_count;
+ uint32_t pio = BM_SSP_CTRL0_DATA_XFER | mxs_spi_cs_to_reg(cs);
+ int ret;
+
+ if (len > SG_NUM * SG_MAXLEN) {
+ dev_err(ssp->dev, "Data chunk too big for DMA\n");
+ return -EINVAL;
+ }
+
+ init_completion(&spi->c);
+
+ if (*first)
+ pio |= BM_SSP_CTRL0_LOCK_CS;
+ if (*last)
+ pio |= BM_SSP_CTRL0_IGNORE_CRC;
+ if (!write)
+ pio |= BM_SSP_CTRL0_READ;
+
+ if (ssp->devid == IMX23_SSP)
+ pio |= len;
+ else
+ writel(len, ssp->base + HW_SSP_XFER_SIZE);
+
+ /* Queue the PIO register write transfer. */
+ desc = dmaengine_prep_slave_sg(ssp->dmach,
+ (struct scatterlist *)&pio,
+ 1, DMA_TRANS_NONE, 0);
+ if (!desc) {
+ dev_err(ssp->dev,
+ "Failed to get PIO reg. write descriptor.\n");
+ return -EINVAL;
+ }
+
+ /* Queue the DMA data transfer. */
+ sg_init_table(sg, (len / SG_MAXLEN) + 1);
+ sg_count = 0;
+ while (len) {
+ sg_set_buf(&sg[sg_count++], buf, min(len, SG_MAXLEN));
+ len -= min(len, SG_MAXLEN);
+ buf += min(len, SG_MAXLEN);
+ }
+ dma_map_sg(ssp->dev, sg, sg_count,
+ write ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+ desc = dmaengine_prep_slave_sg(ssp->dmach, sg, sg_count,
+ write ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
+ if (!desc) {
+ dev_err(ssp->dev,
+ "Failed to get DMA data write descriptor.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /*
+ * The last descriptor must have this callback,
+ * to finish the DMA transaction.
+ */
+ desc->callback = mxs_ssp_dma_irq_callback;
+ desc->callback_param = spi;
+
+ /* Start the transfer. */
+ dmaengine_submit(desc);
+ dma_async_issue_pending(ssp->dmach);
+
+ ret = wait_for_completion_timeout(&spi->c,
+ msecs_to_jiffies(SSP_TIMEOUT));
+
+ if (!ret) {
+ dev_err(ssp->dev, "DMA transfer timeout\n");
+ ret = -ETIMEDOUT;
+ goto err;
+ }
+
+ ret = 0;
+
+err:
+ for (--sg_count; sg_count >= 0; sg_count--) {
+ dma_unmap_sg(ssp->dev, &sg[sg_count], 1,
+ write ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ }
+
+ return ret;
+}
+
static int mxs_spi_txrx_pio(struct mxs_spi *spi, int cs,
unsigned char *buf, int len,
int *first, int *last, int write)
@@ -277,18 +390,48 @@ static int mxs_spi_transfer_one(struct spi_master *master,
first = 1;
if (&t->transfer_list == m->transfers.prev)
last = 1;
- if (t->rx_buf && t->tx_buf) {
+ if ((t->rx_buf && t->tx_buf) || (t->rx_dma && t->tx_dma)) {
dev_err(ssp->dev,
"Cannot send and receive simultaneously\n");
return -EINVAL;
}
- if (t->tx_buf)
- status = mxs_spi_txrx_pio(spi, cs, (void *)t->tx_buf,
- t->len, &first, &last, 1);
- if (t->rx_buf)
- status = mxs_spi_txrx_pio(spi, cs, t->rx_buf,
- t->len, &first, &last, 0);
+ /*
+ * Small blocks can be transfered via PIO.
+ * Measured by empiric means:
+ *
+ * dd if=/dev/mtdblock0 of=/dev/null bs=1024k count=1
+ *
+ * DMA only: 2.164808 seconds, 473.0KB/s
+ * Combined: 1.676276 seconds, 610.9KB/s
+ */
+ if (t->len <= 256) {
+ writel(BM_SSP_CTRL1_DMA_ENABLE,
+ ssp->base + HW_SSP_CTRL1(ssp) +
+ STMP_OFFSET_REG_CLR);
+
+ if (t->tx_buf)
+ status = mxs_spi_txrx_pio(spi, cs,
+ (void *)t->tx_buf,
+ t->len, &first, &last, 1);
+ if (t->rx_buf)
+ status = mxs_spi_txrx_pio(spi, cs,
+ t->rx_buf, t->len,
+ &first, &last, 0);
+ } else {
+ writel(BM_SSP_CTRL1_DMA_ENABLE,
+ ssp->base + HW_SSP_CTRL1(ssp) +
+ STMP_OFFSET_REG_SET);
+
+ if (t->tx_buf)
+ status = mxs_spi_txrx_dma(spi, cs,
+ (void *)t->tx_buf, t->len,
+ &first, &last, 1);
+ if (t->rx_buf)
+ status = mxs_spi_txrx_dma(spi, cs,
+ t->rx_buf, t->len,
+ &first, &last, 0);
+ }
m->actual_length += t->len;
if (status)
@@ -303,6 +446,21 @@ static int mxs_spi_transfer_one(struct spi_master *master,
return status;
}
+static bool mxs_ssp_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct mxs_ssp *ssp = param;
+
+ if (!mxs_dma_is_apbh(chan))
+ return false;
+
+ if (chan->chan_id != ssp->dma_channel)
+ return false;
+
+ chan->private = &ssp->dma_data;
+
+ return true;
+}
+
static const struct of_device_id mxs_spi_dt_ids[] = {
{ .compatible = "fsl,imx23-spi", .data = (void *) IMX23_SSP, },
{ .compatible = "fsl,imx28-spi", .data = (void *) IMX28_SSP, },
@@ -318,15 +476,18 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
struct spi_master *master;
struct mxs_spi *spi;
struct mxs_ssp *ssp;
- struct resource *iores;
+ struct resource *iores, *dmares;
struct pinctrl *pinctrl;
struct clk *clk;
void __iomem *base;
- int devid;
- int ret = 0;
+ int devid, dma_channel;
+ int ret = 0, irq_err, irq_dma;
+ dma_cap_mask_t mask;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!iores)
+ irq_err = platform_get_irq(pdev, 0);
+ irq_dma = platform_get_irq(pdev, 1);
+ if (!iores || irq_err < 0 || irq_dma < 0)
return -EINVAL;
base = devm_request_and_ioremap(&pdev->dev, iores);
@@ -341,10 +502,26 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
if (IS_ERR(clk))
return PTR_ERR(clk);
- if (np)
+ if (np) {
devid = (enum mxs_ssp_id) of_id->data;
- else
+ /*
+ * TODO: This is a temporary solution and should be changed
+ * to use generic DMA binding later when the helpers get in.
+ */
+ ret = of_property_read_u32(np, "fsl,ssp-dma-channel",
+ &dma_channel);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to get DMA channel\n");
+ return -EINVAL;
+ }
+ } else {
+ dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!dmares)
+ return -EINVAL;
devid = pdev->id_entry->driver_data;
+ dma_channel = dmares->start;
+ }
master = spi_alloc_master(&pdev->dev, sizeof(*spi));
if (!master)
@@ -364,8 +541,28 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
ssp->clk = clk;
ssp->base = base;
ssp->devid = devid;
+ ssp->dma_channel = dma_channel;
+
+ ret = devm_request_irq(&pdev->dev, irq_err, mxs_ssp_irq_handler, 0,
+ DRIVER_NAME, ssp);
+ if (ret)
+ goto out_master_free;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ ssp->dma_data.chan_irq = irq_dma;
+ ssp->dmach = dma_request_channel(mask, mxs_ssp_dma_filter, ssp);
+ if (!ssp->dmach) {
+ dev_err(ssp->dev, "Failed to request DMA\n");
+ goto out_master_free;
+ }
+ /*
+ * Crank up the clock to 120MHz, this will be further divided onto a
+ * proper speed.
+ */
clk_prepare_enable(ssp->clk);
+ clk_set_rate(ssp->clk, 120 * 1000 * 1000);
ssp->clk_rate = clk_get_rate(ssp->clk) / 1000;
stmp_reset_block(ssp->base);
@@ -375,13 +572,15 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
ret = spi_register_master(master);
if (ret) {
dev_err(&pdev->dev, "Cannot register SPI master, %d\n", ret);
- goto out_master_free;
+ goto out_free_dma;
}
return 0;
-out_master_free:
+out_free_dma:
+ dma_release_channel(ssp->dmach);
clk_disable_unprepare(ssp->clk);
+out_master_free:
spi_master_put(master);
kfree(master);
return ret;
--
1.7.10.4
^ permalink raw reply related [flat|nested] 62+ messages in thread[parent not found: <1343076052-27312-9-git-send-email-marex-ynQEQJNshbs@public.gmane.org>]
* Re: [PATCH 08/10 RESEND] spi: Add DMA support into SPI driver
2012-07-23 20:40 ` Marek Vasut
@ 2012-08-01 20:34 ` Mark Brown
-1 siblings, 0 replies; 62+ messages in thread
From: Mark Brown @ 2012-08-01 20:34 UTC (permalink / raw)
To: Marek Vasut
Cc: Fabio Estevam, Shawn Guo, Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
On Mon, Jul 23, 2012 at 10:40:50PM +0200, Marek Vasut wrote:
> + /*
> + * Small blocks can be transfered via PIO.
> + * Measured by empiric means:
> + *
> + * dd if=/dev/mtdblock0 of=/dev/null bs=1024k count=1
> + *
> + * DMA only: 2.164808 seconds, 473.0KB/s
> + * Combined: 1.676276 seconds, 610.9KB/s
> + */
I've seen other devices end up using the FIFO length as the decision
point here which makes intuitive sense to me unless the FIFO is
extremely deep.
Not reviewed this properly yet but it looks OK from a first read
through.
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 08/10 RESEND] spi: Add DMA support into SPI driver
@ 2012-08-01 20:34 ` Mark Brown
0 siblings, 0 replies; 62+ messages in thread
From: Mark Brown @ 2012-08-01 20:34 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jul 23, 2012 at 10:40:50PM +0200, Marek Vasut wrote:
> + /*
> + * Small blocks can be transfered via PIO.
> + * Measured by empiric means:
> + *
> + * dd if=/dev/mtdblock0 of=/dev/null bs=1024k count=1
> + *
> + * DMA only: 2.164808 seconds, 473.0KB/s
> + * Combined: 1.676276 seconds, 610.9KB/s
> + */
I've seen other devices end up using the FIFO length as the decision
point here which makes intuitive sense to me unless the FIFO is
extremely deep.
Not reviewed this properly yet but it looks OK from a first read
through.
^ permalink raw reply [flat|nested] 62+ messages in thread
[parent not found: <20120801203448.GX4483-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>]
* Re: [PATCH 08/10 RESEND] spi: Add DMA support into SPI driver
2012-08-01 20:34 ` Mark Brown
@ 2012-08-02 15:00 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-08-02 15:00 UTC (permalink / raw)
To: Mark Brown
Cc: Fabio Estevam, Shawn Guo, Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
Dear Mark Brown,
> On Mon, Jul 23, 2012 at 10:40:50PM +0200, Marek Vasut wrote:
> > + /*
> > + * Small blocks can be transfered via PIO.
> > + * Measured by empiric means:
> > + *
> > + * dd if=/dev/mtdblock0 of=/dev/null bs=1024k count=1
> > + *
> > + * DMA only: 2.164808 seconds, 473.0KB/s
> > + * Combined: 1.676276 seconds, 610.9KB/s
> > + */
>
> I've seen other devices end up using the FIFO length as the decision
> point here which makes intuitive sense to me unless the FIFO is
> extremely deep.
Yep, that's all good. This device has not too deep FIFO, but the reason I chose
not to go that way is because the DMA allocations have some overhead too and
this values seemed to be the best.
> Not reviewed this properly yet but it looks OK from a first read
> through.
Thanks!
Best regards,
Marek Vasut
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 08/10 RESEND] spi: Add DMA support into SPI driver
@ 2012-08-02 15:00 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-08-02 15:00 UTC (permalink / raw)
To: linux-arm-kernel
Dear Mark Brown,
> On Mon, Jul 23, 2012 at 10:40:50PM +0200, Marek Vasut wrote:
> > + /*
> > + * Small blocks can be transfered via PIO.
> > + * Measured by empiric means:
> > + *
> > + * dd if=/dev/mtdblock0 of=/dev/null bs=1024k count=1
> > + *
> > + * DMA only: 2.164808 seconds, 473.0KB/s
> > + * Combined: 1.676276 seconds, 610.9KB/s
> > + */
>
> I've seen other devices end up using the FIFO length as the decision
> point here which makes intuitive sense to me unless the FIFO is
> extremely deep.
Yep, that's all good. This device has not too deep FIFO, but the reason I chose
not to go that way is because the DMA allocations have some overhead too and
this values seemed to be the best.
> Not reviewed this properly yet but it looks OK from a first read
> through.
Thanks!
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-23 20:40 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Cc: Marek Vasut, Fabio Estevam, Shawn Guo, Mark Brown, Attila Kinali,
Chris Ball, Dong Aisheng, Linux ARM kernel
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
Documentation/devicetree/bindings/spi/mxs-spi.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt
new file mode 100644
index 0000000..f1263a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
@@ -0,0 +1,18 @@
+* Freescale MX233/MX28 SSP/SPI
+
+Required properties:
+- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
+- reg: Offset and length of the register set for the device
+- interrupts: Should contain SSP interrupts (error irq first, dma irq second)
+- fsl,ssp-dma-channel: APBX DMA channel for the SSP
+
+Example:
+
+ssp0: ssp@80010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-spi";
+ reg = <0x80010000 2000>;
+ interrupts = <96 82>;
+ fsl,ssp-dma-channel = <0>;
+};
--
1.7.10.4
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation
@ 2012-07-23 20:40 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
Documentation/devicetree/bindings/spi/mxs-spi.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt
new file mode 100644
index 0000000..f1263a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
@@ -0,0 +1,18 @@
+* Freescale MX233/MX28 SSP/SPI
+
+Required properties:
+- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
+- reg: Offset and length of the register set for the device
+- interrupts: Should contain SSP interrupts (error irq first, dma irq second)
+- fsl,ssp-dma-channel: APBX DMA channel for the SSP
+
+Example:
+
+ssp0: ssp at 80010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-spi";
+ reg = <0x80010000 2000>;
+ interrupts = <96 82>;
+ fsl,ssp-dma-channel = <0>;
+};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* Re: [PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-24 18:15 ` Sergei Shtylyov
-1 siblings, 0 replies; 62+ messages in thread
From: Sergei Shtylyov @ 2012-07-24 18:15 UTC (permalink / raw)
To: Marek Vasut
Cc: Fabio Estevam, Chris Ball, Mark Brown, Attila Kinali,
Grant Likely, spi-devel-general, Shawn Guo, Dong Aisheng,
Linux ARM kernel
Hello.
On 07/24/2012 12:40 AM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Attila Kinali <attila@kinali.ch>
> Cc: Chris Ball <cjb@laptop.org>
> CC: Dong Aisheng <b29396@freescale.com>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
> CC: Shawn Guo <shawn.guo@linaro.org>
> ---
> Documentation/devicetree/bindings/spi/mxs-spi.txt | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt
> diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt
> new file mode 100644
> index 0000000..f1263a9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
> @@ -0,0 +1,18 @@
> +* Freescale MX233/MX28 SSP/SPI
> +
> +Required properties:
> +- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
> +- reg: Offset and length of the register set for the device
> +- interrupts: Should contain SSP interrupts (error irq first, dma irq second)
> +- fsl,ssp-dma-channel: APBX DMA channel for the SSP
> +
> +Example:
> +
> +ssp0: ssp@80010000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx28-spi";
> + reg = <0x80010000 2000>;
Not 0x2000?
WBR, Sergei
^ permalink raw reply [flat|nested] 62+ messages in thread* [PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation
@ 2012-07-24 18:15 ` Sergei Shtylyov
0 siblings, 0 replies; 62+ messages in thread
From: Sergei Shtylyov @ 2012-07-24 18:15 UTC (permalink / raw)
To: linux-arm-kernel
Hello.
On 07/24/2012 12:40 AM, Marek Vasut wrote:
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Attila Kinali <attila@kinali.ch>
> Cc: Chris Ball <cjb@laptop.org>
> CC: Dong Aisheng <b29396@freescale.com>
> Cc: Fabio Estevam <fabio.estevam@freescale.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
> CC: Shawn Guo <shawn.guo@linaro.org>
> ---
> Documentation/devicetree/bindings/spi/mxs-spi.txt | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt
> diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt
> new file mode 100644
> index 0000000..f1263a9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
> @@ -0,0 +1,18 @@
> +* Freescale MX233/MX28 SSP/SPI
> +
> +Required properties:
> +- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
> +- reg: Offset and length of the register set for the device
> +- interrupts: Should contain SSP interrupts (error irq first, dma irq second)
> +- fsl,ssp-dma-channel: APBX DMA channel for the SSP
> +
> +Example:
> +
> +ssp0: ssp at 80010000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx28-spi";
> + reg = <0x80010000 2000>;
Not 0x2000?
WBR, Sergei
^ permalink raw reply [flat|nested] 62+ messages in thread[parent not found: <500EE64B.8080103-Igf4POYTYCDQT0dZR+AlfA@public.gmane.org>]
* Re: [PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation
2012-07-24 18:15 ` Sergei Shtylyov
@ 2012-07-24 19:43 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-24 19:43 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Fabio Estevam, Chris Ball, Mark Brown, Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Shawn Guo,
Dong Aisheng, Linux ARM kernel
Dear Sergei Shtylyov,
> Hello.
>
> On 07/24/2012 12:40 AM, Marek Vasut wrote:
> > Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
> > Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
> > Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
> > CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > Cc: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> > Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
> > Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
> > CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> > ---
> >
> > Documentation/devicetree/bindings/spi/mxs-spi.txt | 18
> > ++++++++++++++++++ 1 file changed, 18 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt
> >
> > diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt
> > b/Documentation/devicetree/bindings/spi/mxs-spi.txt new file mode 100644
> > index 0000000..f1263a9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
> > @@ -0,0 +1,18 @@
> > +* Freescale MX233/MX28 SSP/SPI
> > +
> > +Required properties:
> > +- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
> > +- reg: Offset and length of the register set for the device
> > +- interrupts: Should contain SSP interrupts (error irq first, dma irq
> > second) +- fsl,ssp-dma-channel: APBX DMA channel for the SSP
> > +
> > +Example:
> > +
> > +ssp0: ssp@80010000 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "fsl,imx28-spi";
> > + reg = <0x80010000 2000>;
>
> Not 0x2000?
This is actually not the first place I was curious about in the imx28 DTS ...
yes, the size is 0x2000, but "2000" as is is used in multiple places across
imx28. Shawn?
> WBR, Sergei
Best regards,
Marek Vasut
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread* [PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation
@ 2012-07-24 19:43 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-24 19:43 UTC (permalink / raw)
To: linux-arm-kernel
Dear Sergei Shtylyov,
> Hello.
>
> On 07/24/2012 12:40 AM, Marek Vasut wrote:
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Attila Kinali <attila@kinali.ch>
> > Cc: Chris Ball <cjb@laptop.org>
> > CC: Dong Aisheng <b29396@freescale.com>
> > Cc: Fabio Estevam <fabio.estevam@freescale.com>
> > Cc: Grant Likely <grant.likely@secretlab.ca>
> > Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
> > Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
> > CC: Shawn Guo <shawn.guo@linaro.org>
> > ---
> >
> > Documentation/devicetree/bindings/spi/mxs-spi.txt | 18
> > ++++++++++++++++++ 1 file changed, 18 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/spi/mxs-spi.txt
> >
> > diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt
> > b/Documentation/devicetree/bindings/spi/mxs-spi.txt new file mode 100644
> > index 0000000..f1263a9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
> > @@ -0,0 +1,18 @@
> > +* Freescale MX233/MX28 SSP/SPI
> > +
> > +Required properties:
> > +- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
> > +- reg: Offset and length of the register set for the device
> > +- interrupts: Should contain SSP interrupts (error irq first, dma irq
> > second) +- fsl,ssp-dma-channel: APBX DMA channel for the SSP
> > +
> > +Example:
> > +
> > +ssp0: ssp at 80010000 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "fsl,imx28-spi";
> > + reg = <0x80010000 2000>;
>
> Not 0x2000?
This is actually not the first place I was curious about in the imx28 DTS ...
yes, the size is 0x2000, but "2000" as is is used in multiple places across
imx28. Shawn?
> WBR, Sergei
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 62+ messages in thread[parent not found: <201207242143.49038.marex-ynQEQJNshbs@public.gmane.org>]
* Re: [PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation
2012-07-24 19:43 ` Marek Vasut
@ 2012-07-28 11:40 ` Shawn Guo
-1 siblings, 0 replies; 62+ messages in thread
From: Shawn Guo @ 2012-07-28 11:40 UTC (permalink / raw)
To: Marek Vasut
Cc: Fabio Estevam, Sergei Shtylyov, Mark Brown, Attila Kinali, Dong,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Aisheng, Linux ARM kernel
On Tue, Jul 24, 2012 at 09:43:48PM +0200, Marek Vasut wrote:
> This is actually not the first place I was curious about in the imx28 DTS ...
> yes, the size is 0x2000, but "2000" as is is used in multiple places across
> imx28. Shawn?
>
It seems that I overlooked the problem when it got introduced at the
first place. I will send a patch to fix it. Thanks for spotting it.
--
Regards,
Shawn
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation
@ 2012-07-28 11:40 ` Shawn Guo
0 siblings, 0 replies; 62+ messages in thread
From: Shawn Guo @ 2012-07-28 11:40 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 24, 2012 at 09:43:48PM +0200, Marek Vasut wrote:
> This is actually not the first place I was curious about in the imx28 DTS ...
> yes, the size is 0x2000, but "2000" as is is used in multiple places across
> imx28. Shawn?
>
It seems that I overlooked the problem when it got introduced at the
first place. I will send a patch to fix it. Thanks for spotting it.
--
Regards,
Shawn
^ permalink raw reply [flat|nested] 62+ messages in thread
[parent not found: <20120728113957.GE2128-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>]
* Re: [PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation
2012-07-28 11:40 ` Shawn Guo
@ 2012-07-28 11:42 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-28 11:42 UTC (permalink / raw)
To: Shawn Guo
Cc: Fabio Estevam, Sergei Shtylyov, Mark Brown, Attila Kinali,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
Dear Shawn Guo,
> On Tue, Jul 24, 2012 at 09:43:48PM +0200, Marek Vasut wrote:
> > This is actually not the first place I was curious about in the imx28 DTS
> > ... yes, the size is 0x2000, but "2000" as is is used in multiple places
> > across imx28. Shawn?
>
> It seems that I overlooked the problem when it got introduced at the
> first place. I will send a patch to fix it. Thanks for spotting it.
Ok good.
Mark, do you want me to send a V2 of only this particular patch or whole set (I
think that's overkill)?
Best regards,
Marek Vasut
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 09/10 RESEND] spi: Add SSP/SPI device tree documentation
@ 2012-07-28 11:42 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-28 11:42 UTC (permalink / raw)
To: linux-arm-kernel
Dear Shawn Guo,
> On Tue, Jul 24, 2012 at 09:43:48PM +0200, Marek Vasut wrote:
> > This is actually not the first place I was curious about in the imx28 DTS
> > ... yes, the size is 0x2000, but "2000" as is is used in multiple places
> > across imx28. Shawn?
>
> It seems that I overlooked the problem when it got introduced at the
> first place. I will send a patch to fix it. Thanks for spotting it.
Ok good.
Mark, do you want me to send a V2 of only this particular patch or whole set (I
think that's overkill)?
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 10/10 RESEND] ARM: mx28: Add SPI pinmux into imx28.dtsi
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-23 20:40 ` Marek Vasut
-1 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Cc: Marek Vasut, Fabio Estevam, Shawn Guo, Mark Brown, Attila Kinali,
Chris Ball, Dong Aisheng, Linux ARM kernel
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
CC: Dong Aisheng <b29396-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Linux ARM kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Cc: Mark Brown <broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
CC: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/imx28.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index badc76a..4a0f12c 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -507,6 +507,45 @@
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ spi0_pins_a: spi0@0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x2000 0x2010 0x2020 0x2030
+ 0x2040 0x2050 0x2060 0x2070
+ 0x2080 0x2090 0x20a0>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi1_pins_a: spi1@0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x20c0 0x20d0 0x20e0 0x20f0>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi2_pins_a: spi2@0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x2100 0x2110 0x2120
+ 0x2130 0x2140 0x2150>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi3_pins_a: spi3@0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x2180 0x2190 0x21a0 0x21b0>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
};
digctl@8001c000 {
--
1.7.10.4
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 10/10 RESEND] ARM: mx28: Add SPI pinmux into imx28.dtsi
@ 2012-07-23 20:40 ` Marek Vasut
0 siblings, 0 replies; 62+ messages in thread
From: Marek Vasut @ 2012-07-23 20:40 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Attila Kinali <attila@kinali.ch>
Cc: Chris Ball <cjb@laptop.org>
CC: Dong Aisheng <b29396@freescale.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/boot/dts/imx28.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index badc76a..4a0f12c 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -507,6 +507,45 @@
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ spi0_pins_a: spi0 at 0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x2000 0x2010 0x2020 0x2030
+ 0x2040 0x2050 0x2060 0x2070
+ 0x2080 0x2090 0x20a0>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi1_pins_a: spi1 at 0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x20c0 0x20d0 0x20e0 0x20f0>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi2_pins_a: spi2 at 0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x2100 0x2110 0x2120
+ 0x2130 0x2140 0x2150>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi3_pins_a: spi3 at 0 {
+ reg = <0>;
+ fsl,pinmux-ids =
+ <0x2180 0x2190 0x21a0 0x21b0>;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
};
digctl at 8001c000 {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* Re: [PATCH 00/10 V2] MXS SPI driver
2012-07-23 20:40 ` Marek Vasut
@ 2012-07-24 9:25 ` Attila Kinali
-1 siblings, 0 replies; 62+ messages in thread
From: Attila Kinali @ 2012-07-24 9:25 UTC (permalink / raw)
To: Marek Vasut
Cc: Fabio Estevam, Shawn Guo, Mark Brown,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Chris Ball,
Dong Aisheng, Linux ARM kernel
On Mon, 23 Jul 2012 22:40:42 +0200
Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> wrote:
> This patchset adds SPI master support for Freescale i.MX233/i.MX28.
> This is rebased on top of next-20120713. Please consider applying,
> bugs shall now be squashed during the previous two review rounds.
The patchset is good and works as expectd
Tested-by: Attila Kinali <attila-HB9FjVmMKa7tRgLqZ5aouw@public.gmane.org>
Attila Kinali
--
The trouble with you, Shev, is you don't say anything until you've saved
up a whole truckload of damned heavy brick arguments and then you dump
them all out and never look at the bleeding body mangled beneath the heap
-- Tirin, The Dispossessed, U. Le Guin
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 00/10 V2] MXS SPI driver
@ 2012-07-24 9:25 ` Attila Kinali
0 siblings, 0 replies; 62+ messages in thread
From: Attila Kinali @ 2012-07-24 9:25 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, 23 Jul 2012 22:40:42 +0200
Marek Vasut <marex@denx.de> wrote:
> This patchset adds SPI master support for Freescale i.MX233/i.MX28.
> This is rebased on top of next-20120713. Please consider applying,
> bugs shall now be squashed during the previous two review rounds.
The patchset is good and works as expectd
Tested-by: Attila Kinali <attila@kinali.ch>
Attila Kinali
--
The trouble with you, Shev, is you don't say anything until you've saved
up a whole truckload of damned heavy brick arguments and then you dump
them all out and never look at the bleeding body mangled beneath the heap
-- Tirin, The Dispossessed, U. Le Guin
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH] SPI: MXS: Allow to pass the SPI master bus number from the device tree
2012-07-23 20:40 ` Marek Vasut
@ 2012-08-03 14:30 ` Maxime Ripard
-1 siblings, 0 replies; 62+ messages in thread
From: Maxime Ripard @ 2012-08-03 14:30 UTC (permalink / raw)
To: marex-ynQEQJNshbs
Cc: fabio.estevam-KZfg59tc24xl57MIdRCFDg, cjb-2X9k7bc8m7Mdnm+yROfE0A,
broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E,
attila-HB9FjVmMKa7tRgLqZ5aouw,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
shawn.guo-QSEj5FYQhm4dnm+yROfE0A, b29396-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
If you don't do it, the bus number will be a bogus value, possibly used
for device file names in drivers like spidev.
Signed-off-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
drivers/spi/spi-mxs.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index d6a80a1..d6a73ef 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -527,6 +527,15 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
if (!master)
return -ENOMEM;
+ if (pdev->id != -1)
+ master->bus_num = pdev->id;
+ if (np) {
+ unsigned long prop;
+
+ of_property_read_u32(np, "cell-index", &prop);
+ master->bus_num = prop;
+ }
+
master->transfer_one_message = mxs_spi_transfer_one;
master->setup = mxs_spi_setup;
master->cleanup = mxs_spi_cleanup;
--
1.7.9.5
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH] SPI: MXS: Allow to pass the SPI master bus number from the device tree
@ 2012-08-03 14:30 ` Maxime Ripard
0 siblings, 0 replies; 62+ messages in thread
From: Maxime Ripard @ 2012-08-03 14:30 UTC (permalink / raw)
To: linux-arm-kernel
If you don't do it, the bus number will be a bogus value, possibly used
for device file names in drivers like spidev.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
drivers/spi/spi-mxs.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/spi/spi-mxs.c b/drivers/spi/spi-mxs.c
index d6a80a1..d6a73ef 100644
--- a/drivers/spi/spi-mxs.c
+++ b/drivers/spi/spi-mxs.c
@@ -527,6 +527,15 @@ static int __devinit mxs_spi_probe(struct platform_device *pdev)
if (!master)
return -ENOMEM;
+ if (pdev->id != -1)
+ master->bus_num = pdev->id;
+ if (np) {
+ unsigned long prop;
+
+ of_property_read_u32(np, "cell-index", &prop);
+ master->bus_num = prop;
+ }
+
master->transfer_one_message = mxs_spi_transfer_one;
master->setup = mxs_spi_setup;
master->cleanup = mxs_spi_cleanup;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 62+ messages in thread[parent not found: <1344004239-22868-1-git-send-email-maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]
* Re: [PATCH] SPI: MXS: Allow to pass the SPI master bus number from the device tree
2012-08-03 14:30 ` Maxime Ripard
@ 2012-08-03 14:43 ` Shawn Guo
-1 siblings, 0 replies; 62+ messages in thread
From: Shawn Guo @ 2012-08-03 14:43 UTC (permalink / raw)
To: Maxime Ripard
Cc: marex-ynQEQJNshbs, fabio.estevam-KZfg59tc24xl57MIdRCFDg,
broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E,
attila-HB9FjVmMKa7tRgLqZ5aouw,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
cjb-2X9k7bc8m7Mdnm+yROfE0A, b29396-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Fri, Aug 03, 2012 at 04:30:39PM +0200, Maxime Ripard wrote:
> If you don't do it, the bus number will be a bogus value, possibly used
> for device file names in drivers like spidev.
>
Do you see any problem with that? Here is the take from Grant.
http://thread.gmane.org/gmane.linux.kernel.spi.devel/9839/focus=9863
Regards,
Shawn
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH] SPI: MXS: Allow to pass the SPI master bus number from the device tree
@ 2012-08-03 14:43 ` Shawn Guo
0 siblings, 0 replies; 62+ messages in thread
From: Shawn Guo @ 2012-08-03 14:43 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Aug 03, 2012 at 04:30:39PM +0200, Maxime Ripard wrote:
> If you don't do it, the bus number will be a bogus value, possibly used
> for device file names in drivers like spidev.
>
Do you see any problem with that? Here is the take from Grant.
http://thread.gmane.org/gmane.linux.kernel.spi.devel/9839/focus=9863
Regards,
Shawn
^ permalink raw reply [flat|nested] 62+ messages in thread
[parent not found: <20120803144326.GE23791-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>]
* Re: [PATCH] SPI: MXS: Allow to pass the SPI master bus number from the device tree
2012-08-03 14:43 ` Shawn Guo
@ 2012-08-03 16:27 ` Maxime Ripard
-1 siblings, 0 replies; 62+ messages in thread
From: Maxime Ripard @ 2012-08-03 16:27 UTC (permalink / raw)
To: Shawn Guo
Cc: marex-ynQEQJNshbs, fabio.estevam-KZfg59tc24xl57MIdRCFDg,
broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E,
attila-HB9FjVmMKa7tRgLqZ5aouw,
spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
cjb-2X9k7bc8m7Mdnm+yROfE0A, b29396-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Le 03/08/2012 16:43, Shawn Guo a écrit :
> On Fri, Aug 03, 2012 at 04:30:39PM +0200, Maxime Ripard wrote:
>> If you don't do it, the bus number will be a bogus value, possibly used
>> for device file names in drivers like spidev.
>>
> Do you see any problem with that? Here is the take from Grant.
>
> http://thread.gmane.org/gmane.linux.kernel.spi.devel/9839/focus=9863
Ok, I didn't see this thread, obviously.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH] SPI: MXS: Allow to pass the SPI master bus number from the device tree
@ 2012-08-03 16:27 ` Maxime Ripard
0 siblings, 0 replies; 62+ messages in thread
From: Maxime Ripard @ 2012-08-03 16:27 UTC (permalink / raw)
To: linux-arm-kernel
Le 03/08/2012 16:43, Shawn Guo a ?crit :
> On Fri, Aug 03, 2012 at 04:30:39PM +0200, Maxime Ripard wrote:
>> If you don't do it, the bus number will be a bogus value, possibly used
>> for device file names in drivers like spidev.
>>
> Do you see any problem with that? Here is the take from Grant.
>
> http://thread.gmane.org/gmane.linux.kernel.spi.devel/9839/focus=9863
Ok, I didn't see this thread, obviously.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 62+ messages in thread