From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 29/32] fsl_esdhc: Update usdhc driver to support i.MX8
Date: Mon, 23 Jul 2018 16:26:51 -0300 [thread overview]
Message-ID: <CAOMZO5AZvA7xvyZmAx-5tndVtpT62Hc+_x6tWy3Oh9dniaBs0w@mail.gmail.com> (raw)
In-Reply-To: <HE1PR04MB300482D714638B1159F970A488520@HE1PR04MB3004.eurprd04.prod.outlook.com>
Hi Peng,
On Thu, Jul 19, 2018 at 11:04 AM, Peng Fan <peng.fan@nxp.com> wrote:
> There is i.MX8/8X/8M, 8M is for i.MX8MQ and i.MX8MM
> i.MX8/8X has different SoC architecture compared with i.MX8M,
> such as there is SCU inside i.MX8/8X.
> So add a new macro dedicated for i.MX8/8X.
Yes, I understand the differences between the MX8 family.
Couldn't you make CONFIG_IMX8 instead of CONFIG_ARCH_IMX8 for consistency?
Also, for consistency: should CONFIG_MX8M be changed to CONFIG_IMX8M?
Thanks
next prev parent reply other threads:[~2018-07-23 19:26 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-18 1:35 [U-Boot] [PATCH V2 00/32] i.MX: Add i.MX8QXP support Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 01/32] dt-bindings: pinctrl: add i.MX8QXP pads definition Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 02/32] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP clocks definition Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 03/32] dt-bindings: soc: add i.MX8QXP pm and rsrc definition Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 04/32] imx8: add scfw macro definition Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 05/32] imx: add Kconfig entry for i.MX8QXP Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 06/32] arm: build mach-imx for i.MX8 Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 07/32] misc: add i.MX8 misc driver Peng Fan
2018-07-18 8:37 ` Lokesh Vutla
2018-07-18 8:52 ` Peng Fan
2018-07-18 9:04 ` Lokesh Vutla
2018-07-18 9:15 ` Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 08/32] misc: imx8: add scfw api impementation Peng Fan
2018-07-18 8:54 ` Lokesh Vutla
2018-07-18 9:08 ` Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 09/32] arm: global_data: add scu_dev for i.MX8 Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 10/32] imx: boot_mode: Add FLEXSPI boot entry Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 11/32] imx8: add imx-regs header file Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 12/32] imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP defined Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 13/32] imx: add i.MX8 cpu type Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 14/32] armv8: add cpu core helper functions Peng Fan
2018-07-19 13:58 ` Fabio Estevam
2018-07-18 1:35 ` [U-Boot] [PATCH V2 15/32] imx8: add basic cpu support Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 16/32] imx8: add boot device detection Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 17/32] imx8: implement mmc_get_env_dev Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 18/32] imx8: add mmu and dram related functiions Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 19/32] imx8: add arch_cpu_init arch_cpu_init_dm Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 20/32] imx8: add iomux configuration api Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 21/32] imx8: add dummy clock Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 22/32] gpio: mxc_gpio: add support for i.MX8 Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 23/32] pinctrl: Add pinctrl driver " Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 24/32] power: Add power domain " Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 25/32] clk: imx: add clk driver for i.MX8QXP Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 26/32] serial_lpuart: Update lpuart driver to support i.MX8 Peng Fan
2018-07-19 14:03 ` Fabio Estevam
2018-07-18 1:35 ` [U-Boot] [PATCH V2 27/32] serial: lpuart: Enable RX and TX FIFO Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 28/32] serial: lpuart: support uclass clk api Peng Fan
2018-07-18 1:35 ` [U-Boot] [PATCH V2 29/32] fsl_esdhc: Update usdhc driver to support i.MX8 Peng Fan
2018-07-19 14:01 ` Fabio Estevam
2018-07-19 14:04 ` Peng Fan
2018-07-23 19:26 ` Fabio Estevam [this message]
2018-07-24 0:45 ` Peng Fan
2018-07-24 0:51 ` Fabio Estevam
2018-07-24 18:27 ` Troy Kisky
2018-07-24 18:28 ` Fabio Estevam
2018-07-25 0:06 ` Peng Fan
2018-07-18 1:36 ` [U-Boot] [PATCH V2 30/32] mmc: fsl_esdhc: add uclass clk support Peng Fan
2018-07-18 1:36 ` [U-Boot] [PATCH V2 31/32] arm: dts: introduce dtsi for i.MX8QXP Peng Fan
2018-07-18 1:36 ` [U-Boot] [PATCH V2 32/32] imx: add i.MX8QXP MEK board support Peng Fan
2018-07-18 8:29 ` [U-Boot] [PATCH V2 00/32] i.MX: Add i.MX8QXP support Lokesh Vutla
2018-07-18 12:05 ` Peng Fan
2018-07-18 12:43 ` Peter Robinson
2018-07-18 12:47 ` Peng Fan
2018-07-19 13:41 ` Fabio Estevam
2018-07-19 14:02 ` Peng Fan
2018-07-19 14:15 ` Fabio Estevam
2018-07-19 14:28 ` Anatolij Gustschin
2018-07-27 7:54 ` Peng Fan
2018-07-27 17:58 ` Troy Kisky
2018-07-28 2:43 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAOMZO5AZvA7xvyZmAx-5tndVtpT62Hc+_x6tWy3Oh9dniaBs0w@mail.gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.