* usb-wacom-tablet failing to register @ 2020-07-11 14:38 Michael Nazzareno Trimarchi 2020-08-08 14:59 ` Michael Nazzareno Trimarchi 0 siblings, 1 reply; 7+ messages in thread From: Michael Nazzareno Trimarchi @ 2020-07-11 14:38 UTC (permalink / raw) To: qemu-devel Hi all On my 4.17.0-rc1 linux kernel i386 running on qemu, I can't register the wacom driver emulation QEMU emulator version 4.2.0 (Debian 1:4.2-3ubuntu6.3) Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers [ 0.395368] ata2.00: configured for MWDMA2 [ 0.397049] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.584135] usb 2-1: new full-speed USB device number 2 using xhci_hcd [ 0.734449] usb 2-1: New USB device found, idVendor=056a, idProduct=0000, bcdDevice=42.10 [ 0.734461] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 0.734466] usb 2-1: Product: Wacom PenPartner [ 0.734470] usb 2-1: Manufacturer: QEMU [ 0.734474] usb 2-1: SerialNumber: 1-0000:00:04.0-1 [ 0.737347] usbhid 2-1:1.0: can't add hid device: -32 [ 0.737366] usbhid: probe of 2-1:1.0 failed with error -32 I get back an error. Any suggestions? Michael ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: usb-wacom-tablet failing to register 2020-07-11 14:38 usb-wacom-tablet failing to register Michael Nazzareno Trimarchi @ 2020-08-08 14:59 ` Michael Nazzareno Trimarchi 2020-08-08 16:06 ` Michael Nazzareno Trimarchi 0 siblings, 1 reply; 7+ messages in thread From: Michael Nazzareno Trimarchi @ 2020-08-08 14:59 UTC (permalink / raw) To: qemu-devel Hi What I have seen is that the parse fail to execute hid ll_driver parse fai for ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, HID_DT_REPORT, rdesc, rsize); Now this is not implemented in hw/dev-wacom.c . What am I missing? #!/bin/sh IMAGE_DIR="${0%/*}/" if [ "${1}" = "serial-only" ]; then EXTRA_ARGS='-nographic' else EXTRA_ARGS='-serial stdio' fi export PATH="/home/michael/work/amarula/buildroot/output/host/bin:${PATH}" exec qemu-system-i386 -M pc -kernel ${IMAGE_DIR}/bzImage -usb -device usb-wacom-tablet -drive file=${IMAGE_DIR}/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda console=tty1 console=ttyS0" -net nic,model=virtio -net use r ${EXTRA_ARGS} This is how I run it Michael On Sat, Jul 11, 2020 at 4:38 PM Michael Nazzareno Trimarchi <michael@amarulasolutions.com> wrote: > > Hi all > > On my 4.17.0-rc1 linux kernel i386 running on qemu, I can't register > the wacom driver emulation > QEMU emulator version 4.2.0 (Debian 1:4.2-3ubuntu6.3) > Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers > > [ 0.395368] ata2.00: configured for MWDMA2 > [ 0.397049] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM > 2.5+ PQ: 0 ANSI: 5 > [ 0.584135] usb 2-1: new full-speed USB device number 2 using xhci_hcd > [ 0.734449] usb 2-1: New USB device found, idVendor=056a, > idProduct=0000, bcdDevice=42.10 > [ 0.734461] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 0.734466] usb 2-1: Product: Wacom PenPartner > [ 0.734470] usb 2-1: Manufacturer: QEMU > [ 0.734474] usb 2-1: SerialNumber: 1-0000:00:04.0-1 > [ 0.737347] usbhid 2-1:1.0: can't add hid device: -32 > [ 0.737366] usbhid: probe of 2-1:1.0 failed with error -32 > > I get back an error. Any suggestions? > > Michael -- Michael Nazzareno Trimarchi Amarula Solutions BV COO Co-Founder Cruquiuskade 47 Amsterdam 1018 AM NL T. +31(0)851119172 M. +39(0)3479132170 [`as] https://www.amarulasolutions.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: usb-wacom-tablet failing to register 2020-08-08 14:59 ` Michael Nazzareno Trimarchi @ 2020-08-08 16:06 ` Michael Nazzareno Trimarchi 2020-08-08 16:40 ` Michael Nazzareno Trimarchi 2020-09-02 11:31 ` Markus Armbruster 0 siblings, 2 replies; 7+ messages in thread From: Michael Nazzareno Trimarchi @ 2020-08-08 16:06 UTC (permalink / raw) To: qemu-devel, Markus Armbruster Hi Markus I have seen that you are a committer there so what I have seen that This request is not implement switch (request) { case InterfaceRequest | USB_REQ_GET_DESCRIPTOR: When linux probe it fail here ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, > HID_DT_REPORT, rdesc, rsize); I think that I miss something in documentation Running 5.8.0-rc3 and qemu 4.2.0 Michael On Sat, Aug 8, 2020 at 4:59 PM Michael Nazzareno Trimarchi <michael@amarulasolutions.com> wrote: > > Hi > > What I have seen is that the parse fail to execute > hid ll_driver parse fai for > > ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, > HID_DT_REPORT, rdesc, rsize); > > Now this is not implemented in hw/dev-wacom.c . What am I missing? > > #!/bin/sh > IMAGE_DIR="${0%/*}/" > > if [ "${1}" = "serial-only" ]; then > EXTRA_ARGS='-nographic' > else > EXTRA_ARGS='-serial stdio' > fi > > export PATH="/home/michael/work/amarula/buildroot/output/host/bin:${PATH}" > exec qemu-system-i386 -M pc -kernel ${IMAGE_DIR}/bzImage -usb > -device usb-wacom-tablet -drive > file=${IMAGE_DIR}/rootfs.ext2,if=virtio,format=raw -append "rootwait > root=/dev/vda console=tty1 console=ttyS0" -net nic,model=virtio -net > use > r ${EXTRA_ARGS} > > This is how I run it > > Michael > > On Sat, Jul 11, 2020 at 4:38 PM Michael Nazzareno Trimarchi > <michael@amarulasolutions.com> wrote: > > > > Hi all > > > > On my 4.17.0-rc1 linux kernel i386 running on qemu, I can't register > > the wacom driver emulation > > QEMU emulator version 4.2.0 (Debian 1:4.2-3ubuntu6.3) > > Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers > > > > [ 0.395368] ata2.00: configured for MWDMA2 > > [ 0.397049] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM > > 2.5+ PQ: 0 ANSI: 5 > > [ 0.584135] usb 2-1: new full-speed USB device number 2 using xhci_hcd > > [ 0.734449] usb 2-1: New USB device found, idVendor=056a, > > idProduct=0000, bcdDevice=42.10 > > [ 0.734461] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > > [ 0.734466] usb 2-1: Product: Wacom PenPartner > > [ 0.734470] usb 2-1: Manufacturer: QEMU > > [ 0.734474] usb 2-1: SerialNumber: 1-0000:00:04.0-1 > > [ 0.737347] usbhid 2-1:1.0: can't add hid device: -32 > > [ 0.737366] usbhid: probe of 2-1:1.0 failed with error -32 > > > > I get back an error. Any suggestions? > > > > Michael > > > > -- > Michael Nazzareno Trimarchi > Amarula Solutions BV > COO Co-Founder > Cruquiuskade 47 Amsterdam 1018 AM NL > T. +31(0)851119172 > M. +39(0)3479132170 > [`as] https://www.amarulasolutions.com -- Michael Nazzareno Trimarchi Amarula Solutions BV COO Co-Founder Cruquiuskade 47 Amsterdam 1018 AM NL T. +31(0)851119172 M. +39(0)3479132170 [`as] https://www.amarulasolutions.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: usb-wacom-tablet failing to register 2020-08-08 16:06 ` Michael Nazzareno Trimarchi @ 2020-08-08 16:40 ` Michael Nazzareno Trimarchi 2020-09-02 11:31 ` Markus Armbruster 1 sibling, 0 replies; 7+ messages in thread From: Michael Nazzareno Trimarchi @ 2020-08-08 16:40 UTC (permalink / raw) To: qemu-devel, Markus Armbruster Hi On Sat, Aug 8, 2020 at 6:06 PM Michael Nazzareno Trimarchi <michael@amarulasolutions.com> wrote: > > Hi Markus > > I have seen that you are a committer there so what I have seen that > > This request is not implement > switch (request) { > case InterfaceRequest | USB_REQ_GET_DESCRIPTOR: > > When linux probe it fail here > > ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, > > HID_DT_REPORT, rdesc, rsize); > > I think that I miss something in documentation > > Running 5.8.0-rc3 and qemu 4.2.0 If I implement case InterfaceRequest | USB_REQ_GET_DESCRIPTOR: switch (value >> 8) { case 0x22: p->actual_length = 0; default: break; } break; Them modprobe wacom.ko works. Seems that the WACOM should be blacklist in kernel Michael > > Michael > > On Sat, Aug 8, 2020 at 4:59 PM Michael Nazzareno Trimarchi > <michael@amarulasolutions.com> wrote: > > > > Hi > > > > What I have seen is that the parse fail to execute > > hid ll_driver parse fai for > > > > ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, > > HID_DT_REPORT, rdesc, rsize); > > > > Now this is not implemented in hw/dev-wacom.c . What am I missing? > > > > #!/bin/sh > > IMAGE_DIR="${0%/*}/" > > > > if [ "${1}" = "serial-only" ]; then > > EXTRA_ARGS='-nographic' > > else > > EXTRA_ARGS='-serial stdio' > > fi > > > > export PATH="/home/michael/work/amarula/buildroot/output/host/bin:${PATH}" > > exec qemu-system-i386 -M pc -kernel ${IMAGE_DIR}/bzImage -usb > > -device usb-wacom-tablet -drive > > file=${IMAGE_DIR}/rootfs.ext2,if=virtio,format=raw -append "rootwait > > root=/dev/vda console=tty1 console=ttyS0" -net nic,model=virtio -net > > use > > r ${EXTRA_ARGS} > > > > This is how I run it > > > > Michael > > > > On Sat, Jul 11, 2020 at 4:38 PM Michael Nazzareno Trimarchi > > <michael@amarulasolutions.com> wrote: > > > > > > Hi all > > > > > > On my 4.17.0-rc1 linux kernel i386 running on qemu, I can't register > > > the wacom driver emulation > > > QEMU emulator version 4.2.0 (Debian 1:4.2-3ubuntu6.3) > > > Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers > > > > > > [ 0.395368] ata2.00: configured for MWDMA2 > > > [ 0.397049] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM > > > 2.5+ PQ: 0 ANSI: 5 > > > [ 0.584135] usb 2-1: new full-speed USB device number 2 using xhci_hcd > > > [ 0.734449] usb 2-1: New USB device found, idVendor=056a, > > > idProduct=0000, bcdDevice=42.10 > > > [ 0.734461] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > > > [ 0.734466] usb 2-1: Product: Wacom PenPartner > > > [ 0.734470] usb 2-1: Manufacturer: QEMU > > > [ 0.734474] usb 2-1: SerialNumber: 1-0000:00:04.0-1 > > > [ 0.737347] usbhid 2-1:1.0: can't add hid device: -32 > > > [ 0.737366] usbhid: probe of 2-1:1.0 failed with error -32 > > > > > > I get back an error. Any suggestions? > > > > > > Michael > > > > > > > > -- > > Michael Nazzareno Trimarchi > > Amarula Solutions BV > > COO Co-Founder > > Cruquiuskade 47 Amsterdam 1018 AM NL > > T. +31(0)851119172 > > M. +39(0)3479132170 > > [`as] https://www.amarulasolutions.com > > > > -- > Michael Nazzareno Trimarchi > Amarula Solutions BV > COO Co-Founder > Cruquiuskade 47 Amsterdam 1018 AM NL > T. +31(0)851119172 > M. +39(0)3479132170 > [`as] https://www.amarulasolutions.com -- Michael Nazzareno Trimarchi Amarula Solutions BV COO Co-Founder Cruquiuskade 47 Amsterdam 1018 AM NL T. +31(0)851119172 M. +39(0)3479132170 [`as] https://www.amarulasolutions.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: usb-wacom-tablet failing to register 2020-08-08 16:06 ` Michael Nazzareno Trimarchi 2020-08-08 16:40 ` Michael Nazzareno Trimarchi @ 2020-09-02 11:31 ` Markus Armbruster 2021-02-03 16:51 ` Philippe Mathieu-Daudé 1 sibling, 1 reply; 7+ messages in thread From: Markus Armbruster @ 2020-09-02 11:31 UTC (permalink / raw) To: Michael Nazzareno Trimarchi; +Cc: qemu-devel, Gerd Hoffmann Michael Nazzareno Trimarchi <michael@amarulasolutions.com> writes: > Hi Markus > > I have seen that you are a committer there so what I have seen that I know precious little about USB, and nothing about this particular device. I'm cc'ing our USB maintainer Gerd. > This request is not implement > switch (request) { > case InterfaceRequest | USB_REQ_GET_DESCRIPTOR: > > When linux probe it fail here > > ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, >> HID_DT_REPORT, rdesc, rsize); > > I think that I miss something in documentation > > Running 5.8.0-rc3 and qemu 4.2.0 > > Michael > > On Sat, Aug 8, 2020 at 4:59 PM Michael Nazzareno Trimarchi > <michael@amarulasolutions.com> wrote: >> >> Hi >> >> What I have seen is that the parse fail to execute >> hid ll_driver parse fai for >> >> ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, >> HID_DT_REPORT, rdesc, rsize); >> >> Now this is not implemented in hw/dev-wacom.c . What am I missing? >> >> #!/bin/sh >> IMAGE_DIR="${0%/*}/" >> >> if [ "${1}" = "serial-only" ]; then >> EXTRA_ARGS='-nographic' >> else >> EXTRA_ARGS='-serial stdio' >> fi >> >> export PATH="/home/michael/work/amarula/buildroot/output/host/bin:${PATH}" >> exec qemu-system-i386 -M pc -kernel ${IMAGE_DIR}/bzImage -usb >> -device usb-wacom-tablet -drive >> file=${IMAGE_DIR}/rootfs.ext2,if=virtio,format=raw -append "rootwait >> root=/dev/vda console=tty1 console=ttyS0" -net nic,model=virtio -net >> use >> r ${EXTRA_ARGS} >> >> This is how I run it >> >> Michael >> >> On Sat, Jul 11, 2020 at 4:38 PM Michael Nazzareno Trimarchi >> <michael@amarulasolutions.com> wrote: >> > >> > Hi all >> > >> > On my 4.17.0-rc1 linux kernel i386 running on qemu, I can't register >> > the wacom driver emulation >> > QEMU emulator version 4.2.0 (Debian 1:4.2-3ubuntu6.3) >> > Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers >> > >> > [ 0.395368] ata2.00: configured for MWDMA2 >> > [ 0.397049] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM >> > 2.5+ PQ: 0 ANSI: 5 >> > [ 0.584135] usb 2-1: new full-speed USB device number 2 using xhci_hcd >> > [ 0.734449] usb 2-1: New USB device found, idVendor=056a, >> > idProduct=0000, bcdDevice=42.10 >> > [ 0.734461] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >> > [ 0.734466] usb 2-1: Product: Wacom PenPartner >> > [ 0.734470] usb 2-1: Manufacturer: QEMU >> > [ 0.734474] usb 2-1: SerialNumber: 1-0000:00:04.0-1 >> > [ 0.737347] usbhid 2-1:1.0: can't add hid device: -32 >> > [ 0.737366] usbhid: probe of 2-1:1.0 failed with error -32 >> > >> > I get back an error. Any suggestions? >> > >> > Michael >> >> >> >> -- >> Michael Nazzareno Trimarchi >> Amarula Solutions BV >> COO Co-Founder >> Cruquiuskade 47 Amsterdam 1018 AM NL >> T. +31(0)851119172 >> M. +39(0)3479132170 >> [`as] https://www.amarulasolutions.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: usb-wacom-tablet failing to register 2020-09-02 11:31 ` Markus Armbruster @ 2021-02-03 16:51 ` Philippe Mathieu-Daudé 2021-02-03 16:53 ` Michael Nazzareno Trimarchi 0 siblings, 1 reply; 7+ messages in thread From: Philippe Mathieu-Daudé @ 2021-02-03 16:51 UTC (permalink / raw) To: Markus Armbruster, Michael Nazzareno Trimarchi; +Cc: qemu-devel, Gerd Hoffmann Hi Michael, On 9/2/20 1:31 PM, Markus Armbruster wrote: > Michael Nazzareno Trimarchi <michael@amarulasolutions.com> writes: > >> Hi Markus >> >> I have seen that you are a committer there so what I have seen that > > I know precious little about USB, and nothing about this particular > device. I'm cc'ing our USB maintainer Gerd. > >> This request is not implement >> switch (request) { >> case InterfaceRequest | USB_REQ_GET_DESCRIPTOR: >> >> When linux probe it fail here >> >> ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, >>> HID_DT_REPORT, rdesc, rsize); >> >> I think that I miss something in documentation >> >> Running 5.8.0-rc3 and qemu 4.2.0 >> >> Michael >> >> On Sat, Aug 8, 2020 at 4:59 PM Michael Nazzareno Trimarchi >> <michael@amarulasolutions.com> wrote: >>> >>> Hi >>> >>> What I have seen is that the parse fail to execute >>> hid ll_driver parse fai for >>> >>> ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, >>> HID_DT_REPORT, rdesc, rsize); >>> >>> Now this is not implemented in hw/dev-wacom.c . What am I missing? >>> >>> #!/bin/sh >>> IMAGE_DIR="${0%/*}/" >>> >>> if [ "${1}" = "serial-only" ]; then >>> EXTRA_ARGS='-nographic' >>> else >>> EXTRA_ARGS='-serial stdio' >>> fi >>> >>> export PATH="/home/michael/work/amarula/buildroot/output/host/bin:${PATH}" >>> exec qemu-system-i386 -M pc -kernel ${IMAGE_DIR}/bzImage -usb >>> -device usb-wacom-tablet -drive >>> file=${IMAGE_DIR}/rootfs.ext2,if=virtio,format=raw -append "rootwait >>> root=/dev/vda console=tty1 console=ttyS0" -net nic,model=virtio -net >>> use >>> r ${EXTRA_ARGS} >>> >>> This is how I run it >>> >>> Michael >>> >>> On Sat, Jul 11, 2020 at 4:38 PM Michael Nazzareno Trimarchi >>> <michael@amarulasolutions.com> wrote: >>>> >>>> Hi all >>>> >>>> On my 4.17.0-rc1 linux kernel i386 running on qemu, I can't register >>>> the wacom driver emulation >>>> QEMU emulator version 4.2.0 (Debian 1:4.2-3ubuntu6.3) >>>> Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers >>>> >>>> [ 0.395368] ata2.00: configured for MWDMA2 >>>> [ 0.397049] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM >>>> 2.5+ PQ: 0 ANSI: 5 >>>> [ 0.584135] usb 2-1: new full-speed USB device number 2 using xhci_hcd >>>> [ 0.734449] usb 2-1: New USB device found, idVendor=056a, >>>> idProduct=0000, bcdDevice=42.10 >>>> [ 0.734461] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >>>> [ 0.734466] usb 2-1: Product: Wacom PenPartner >>>> [ 0.734470] usb 2-1: Manufacturer: QEMU >>>> [ 0.734474] usb 2-1: SerialNumber: 1-0000:00:04.0-1 >>>> [ 0.737347] usbhid 2-1:1.0: can't add hid device: -32 >>>> [ 0.737366] usbhid: probe of 2-1:1.0 failed with error -32 >>>> >>>> I get back an error. Any suggestions? Do you still have that issue? ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: usb-wacom-tablet failing to register 2021-02-03 16:51 ` Philippe Mathieu-Daudé @ 2021-02-03 16:53 ` Michael Nazzareno Trimarchi 0 siblings, 0 replies; 7+ messages in thread From: Michael Nazzareno Trimarchi @ 2021-02-03 16:53 UTC (permalink / raw) To: Philippe Mathieu-Daudé; +Cc: Gerd Hoffmann, Markus Armbruster, qemu-devel Hi On Wed, Feb 3, 2021 at 5:51 PM Philippe Mathieu-Daudé <philmd@redhat.com> wrote: > > Hi Michael, > > On 9/2/20 1:31 PM, Markus Armbruster wrote: > > Michael Nazzareno Trimarchi <michael@amarulasolutions.com> writes: > > > >> Hi Markus > >> > >> I have seen that you are a committer there so what I have seen that > > > > I know precious little about USB, and nothing about this particular > > device. I'm cc'ing our USB maintainer Gerd. > > > >> This request is not implement > >> switch (request) { > >> case InterfaceRequest | USB_REQ_GET_DESCRIPTOR: > >> > >> When linux probe it fail here > >> > >> ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, > >>> HID_DT_REPORT, rdesc, rsize); > >> > >> I think that I miss something in documentation > >> > >> Running 5.8.0-rc3 and qemu 4.2.0 > >> > >> Michael > >> > >> On Sat, Aug 8, 2020 at 4:59 PM Michael Nazzareno Trimarchi > >> <michael@amarulasolutions.com> wrote: > >>> > >>> Hi > >>> > >>> What I have seen is that the parse fail to execute > >>> hid ll_driver parse fai for > >>> > >>> ret = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, > >>> HID_DT_REPORT, rdesc, rsize); > >>> > >>> Now this is not implemented in hw/dev-wacom.c . What am I missing? > >>> > >>> #!/bin/sh > >>> IMAGE_DIR="${0%/*}/" > >>> > >>> if [ "${1}" = "serial-only" ]; then > >>> EXTRA_ARGS='-nographic' > >>> else > >>> EXTRA_ARGS='-serial stdio' > >>> fi > >>> > >>> export PATH="/home/michael/work/amarula/buildroot/output/host/bin:${PATH}" > >>> exec qemu-system-i386 -M pc -kernel ${IMAGE_DIR}/bzImage -usb > >>> -device usb-wacom-tablet -drive > >>> file=${IMAGE_DIR}/rootfs.ext2,if=virtio,format=raw -append "rootwait > >>> root=/dev/vda console=tty1 console=ttyS0" -net nic,model=virtio -net > >>> use > >>> r ${EXTRA_ARGS} > >>> > >>> This is how I run it > >>> > >>> Michael > >>> > >>> On Sat, Jul 11, 2020 at 4:38 PM Michael Nazzareno Trimarchi > >>> <michael@amarulasolutions.com> wrote: > >>>> > >>>> Hi all > >>>> > >>>> On my 4.17.0-rc1 linux kernel i386 running on qemu, I can't register > >>>> the wacom driver emulation > >>>> QEMU emulator version 4.2.0 (Debian 1:4.2-3ubuntu6.3) > >>>> Copyright (c) 2003-2019 Fabrice Bellard and the QEMU Project developers > >>>> > >>>> [ 0.395368] ata2.00: configured for MWDMA2 > >>>> [ 0.397049] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM > >>>> 2.5+ PQ: 0 ANSI: 5 > >>>> [ 0.584135] usb 2-1: new full-speed USB device number 2 using xhci_hcd > >>>> [ 0.734449] usb 2-1: New USB device found, idVendor=056a, > >>>> idProduct=0000, bcdDevice=42.10 > >>>> [ 0.734461] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > >>>> [ 0.734466] usb 2-1: Product: Wacom PenPartner > >>>> [ 0.734470] usb 2-1: Manufacturer: QEMU > >>>> [ 0.734474] usb 2-1: SerialNumber: 1-0000:00:04.0-1 > >>>> [ 0.737347] usbhid 2-1:1.0: can't add hid device: -32 > >>>> [ 0.737366] usbhid: probe of 2-1:1.0 failed with error -32 > >>>> > >>>> I get back an error. Any suggestions? > > Do you still have that issue? > Sorry, I'm really on a lot of programming. I have a patch, need to clean up and send up, according to review and I need to test it again Michael -- Michael Nazzareno Trimarchi Amarula Solutions BV COO Co-Founder Cruquiuskade 47 Amsterdam 1018 AM NL T. +31(0)851119172 M. +39(0)3479132170 [`as] https://www.amarulasolutions.com ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-02-03 16:58 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-07-11 14:38 usb-wacom-tablet failing to register Michael Nazzareno Trimarchi 2020-08-08 14:59 ` Michael Nazzareno Trimarchi 2020-08-08 16:06 ` Michael Nazzareno Trimarchi 2020-08-08 16:40 ` Michael Nazzareno Trimarchi 2020-09-02 11:31 ` Markus Armbruster 2021-02-03 16:51 ` Philippe Mathieu-Daudé 2021-02-03 16:53 ` Michael Nazzareno Trimarchi
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.