* building and using yocto 1.1 @ 2011-10-28 14:20 Xianghua Xiao 2011-10-28 14:45 ` Mark Hatle 0 siblings, 1 reply; 10+ messages in thread From: Xianghua Xiao @ 2011-10-28 14:20 UTC (permalink / raw) To: yocto when I built 1.0 out of the box, it took 7 hours. on the same machine/network, yocto 1.1 took a full 12 hours, not sure what happened to cause this nearly doubled build time. after the default build(bitbake core-image-sato), I run 'runqemu qemux86', click on 'tasks', try to add a new task, however my input is shown non-english, or garbage on screen, which I have seen the same issue on yocto1.0 release as well. this is a 10.04 ubuntu 64bit machine. don't know what to say about it, just my OOB(out-of-box) experience xianghua ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: building and using yocto 1.1 2011-10-28 14:20 building and using yocto 1.1 Xianghua Xiao @ 2011-10-28 14:45 ` Mark Hatle 2011-10-28 15:07 ` Xu, Jiajun 2011-10-28 16:13 ` Xianghua Xiao 0 siblings, 2 replies; 10+ messages in thread From: Mark Hatle @ 2011-10-28 14:45 UTC (permalink / raw) To: yocto What machine are you using (amount of ram, disk space, and cpu cores)? What configuration did you set for parallel builds? I can build 1.1 on an 8 core i7 system w/ 8 GB of ram, set with parallel settings of 8 thread and 8 parallel make jobs, in about 100 minutes (or less). --Mark On 10/28/11 9:20 AM, Xianghua Xiao wrote: > when I built 1.0 out of the box, it took 7 hours. > on the same machine/network, yocto 1.1 took a full 12 hours, not sure > what happened to cause this nearly doubled build time. > > after the default build(bitbake core-image-sato), I run 'runqemu > qemux86', click on 'tasks', try to add a new task, however my input is > shown non-english, or garbage on screen, which I have seen the same > issue on yocto1.0 release as well. this is a 10.04 ubuntu 64bit > machine. > > don't know what to say about it, just my OOB(out-of-box) experience > > xianghua > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: building and using yocto 1.1 2011-10-28 14:45 ` Mark Hatle @ 2011-10-28 15:07 ` Xu, Jiajun 2011-10-28 16:13 ` Xianghua Xiao 1 sibling, 0 replies; 10+ messages in thread From: Xu, Jiajun @ 2011-10-28 15:07 UTC (permalink / raw) To: Mark Hatle, yocto We also test 1.1 on a 4-core Core i7 machine with 4GB memory. The build time is about 120 minutes. The detailed test result and configuration is on https://wiki.yoctoproject.org/wiki/Performance_Test. Maybe you could follow the page and retry the build. > What machine are you using (amount of ram, disk space, and cpu cores)? > > What configuration did you set for parallel builds? > > I can build 1.1 on an 8 core i7 system w/ 8 GB of ram, set with > parallel settings of 8 thread and 8 parallel make jobs, in about 100 minutes (or less). > > --Mark > > On 10/28/11 9:20 AM, Xianghua Xiao wrote: >> when I built 1.0 out of the box, it took 7 hours. >> on the same machine/network, yocto 1.1 took a full 12 hours, not >> sure what happened to cause this nearly doubled build time. >> >> after the default build(bitbake core-image-sato), I run 'runqemu >> qemux86', click on 'tasks', try to add a new task, however my input >> is shown non-english, or garbage on screen, which I have seen the >> same issue on yocto1.0 release as well. this is a 10.04 ubuntu 64bit >> machine. >> >> don't know what to say about it, just my OOB(out-of-box) experience >> >> xianghua >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto Best Regards, Jiajun ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: building and using yocto 1.1 2011-10-28 14:45 ` Mark Hatle 2011-10-28 15:07 ` Xu, Jiajun @ 2011-10-28 16:13 ` Xianghua Xiao 2011-10-28 16:20 ` Xianghua Xiao 2011-10-28 16:23 ` Mark Hatle 1 sibling, 2 replies; 10+ messages in thread From: Xianghua Xiao @ 2011-10-28 16:13 UTC (permalink / raw) To: Mark Hatle; +Cc: yocto core2duo E7200 2.53Ghz 4GB 500GB 1 thread 1 parallel due to past experience I had from the past(parallel make did not work well reliably) thanks, xianghua On Fri, Oct 28, 2011 at 9:45 AM, Mark Hatle <mark.hatle@windriver.com> wrote: > What machine are you using (amount of ram, disk space, and cpu cores)? > > What configuration did you set for parallel builds? > > I can build 1.1 on an 8 core i7 system w/ 8 GB of ram, set with parallel > settings of 8 thread and 8 parallel make jobs, in about 100 minutes (or less). > > --Mark > > On 10/28/11 9:20 AM, Xianghua Xiao wrote: >> when I built 1.0 out of the box, it took 7 hours. >> on the same machine/network, yocto 1.1 took a full 12 hours, not sure >> what happened to cause this nearly doubled build time. >> >> after the default build(bitbake core-image-sato), I run 'runqemu >> qemux86', click on 'tasks', try to add a new task, however my input is >> shown non-english, or garbage on screen, which I have seen the same >> issue on yocto1.0 release as well. this is a 10.04 ubuntu 64bit >> machine. >> >> don't know what to say about it, just my OOB(out-of-box) experience >> >> xianghua >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: building and using yocto 1.1 2011-10-28 16:13 ` Xianghua Xiao @ 2011-10-28 16:20 ` Xianghua Xiao 2011-10-28 16:45 ` Joshua Lock 2011-10-28 16:23 ` Mark Hatle 1 sibling, 1 reply; 10+ messages in thread From: Xianghua Xiao @ 2011-10-28 16:20 UTC (permalink / raw) To: Mark Hatle; +Cc: yocto sorry for the typo in my previous email. guess I need get a i7 and start to use parallel build again. is there a way that, when a release is made, all the related source tarballs can be download as a whole? the separate download slows build a lot for the out-of-box test as well. thanks, xianghua On Fri, Oct 28, 2011 at 11:13 AM, Xianghua Xiao <xiaoxianghua@gmail.com> wrote: > core2duo E7200 2.53Ghz 4GB 500GB > > 1 thread 1 parallel due to past experience I had from the > past(parallel make did not work well reliably) > > thanks, > xianghua > > > On Fri, Oct 28, 2011 at 9:45 AM, Mark Hatle <mark.hatle@windriver.com> wrote: >> What machine are you using (amount of ram, disk space, and cpu cores)? >> >> What configuration did you set for parallel builds? >> >> I can build 1.1 on an 8 core i7 system w/ 8 GB of ram, set with parallel >> settings of 8 thread and 8 parallel make jobs, in about 100 minutes (or less). >> >> --Mark >> >> On 10/28/11 9:20 AM, Xianghua Xiao wrote: >>> when I built 1.0 out of the box, it took 7 hours. >>> on the same machine/network, yocto 1.1 took a full 12 hours, not sure >>> what happened to cause this nearly doubled build time. >>> >>> after the default build(bitbake core-image-sato), I run 'runqemu >>> qemux86', click on 'tasks', try to add a new task, however my input is >>> shown non-english, or garbage on screen, which I have seen the same >>> issue on yocto1.0 release as well. this is a 10.04 ubuntu 64bit >>> machine. >>> >>> don't know what to say about it, just my OOB(out-of-box) experience >>> >>> xianghua >>> _______________________________________________ >>> yocto mailing list >>> yocto@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/yocto >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: building and using yocto 1.1 2011-10-28 16:20 ` Xianghua Xiao @ 2011-10-28 16:45 ` Joshua Lock 2011-10-28 17:17 ` Xianghua Xiao 0 siblings, 1 reply; 10+ messages in thread From: Joshua Lock @ 2011-10-28 16:45 UTC (permalink / raw) To: yocto On 28/10/11 09:20, Xianghua Xiao wrote: > is there a way that, when a release is made, all the related source > tarballs can be download as a whole? the separate download slows > build a lot for the out-of-box test as well. We have a BitBake command to fetch all of the sources without actually doing the build: bitbake <target> -c fetchall i.e. bitbake core-image-sato -c fetchall OR bitbake world -c fetchall Cheers, Joshua -- Joshua Lock Yocto Project "Johannes factotum" Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: building and using yocto 1.1 2011-10-28 16:45 ` Joshua Lock @ 2011-10-28 17:17 ` Xianghua Xiao 0 siblings, 0 replies; 10+ messages in thread From: Xianghua Xiao @ 2011-10-28 17:17 UTC (permalink / raw) To: Joshua Lock; +Cc: yocto filed a bug on sato-input. thanks! On Fri, Oct 28, 2011 at 11:45 AM, Joshua Lock <josh@linux.intel.com> wrote: > On 28/10/11 09:20, Xianghua Xiao wrote: >> is there a way that, when a release is made, all the related source >> tarballs can be download as a whole? the separate download slows >> build a lot for the out-of-box test as well. > > We have a BitBake command to fetch all of the sources without actually > doing the build: > > bitbake <target> -c fetchall > > i.e. > > bitbake core-image-sato -c fetchall > > OR > > bitbake world -c fetchall > > Cheers, > Joshua > -- > Joshua Lock > Yocto Project "Johannes factotum" > Intel Open Source Technology Centre > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: building and using yocto 1.1 2011-10-28 16:13 ` Xianghua Xiao 2011-10-28 16:20 ` Xianghua Xiao @ 2011-10-28 16:23 ` Mark Hatle 2011-10-28 16:39 ` Xianghua Xiao 1 sibling, 1 reply; 10+ messages in thread From: Mark Hatle @ 2011-10-28 16:23 UTC (permalink / raw) To: Xianghua Xiao; +Cc: yocto On 10/28/11 11:13 AM, Xianghua Xiao wrote: > core2duo E7200 2.53Ghz 4GB 500GB > > 1 thread 1 parallel due to past experience I had from the > past(parallel make did not work well reliably) It is a goal of the Yocto Project (and Open Embedded) that parallel building is full supported, and any identified bugs are fixed quickly. Enable parallel builds and your performance will be significantly better. If you have hyperthreading enabled, and setup a 4/4 parallel build. I would expect about a 4-5 hour build time. (May be faster) --Mark > thanks, > xianghua > > > On Fri, Oct 28, 2011 at 9:45 AM, Mark Hatle <mark.hatle@windriver.com> wrote: >> What machine are you using (amount of ram, disk space, and cpu cores)? >> >> What configuration did you set for parallel builds? >> >> I can build 1.1 on an 8 core i7 system w/ 8 GB of ram, set with parallel >> settings of 8 thread and 8 parallel make jobs, in about 100 minutes (or less). >> >> --Mark >> >> On 10/28/11 9:20 AM, Xianghua Xiao wrote: >>> when I built 1.0 out of the box, it took 7 hours. >>> on the same machine/network, yocto 1.1 took a full 12 hours, not sure >>> what happened to cause this nearly doubled build time. >>> >>> after the default build(bitbake core-image-sato), I run 'runqemu >>> qemux86', click on 'tasks', try to add a new task, however my input is >>> shown non-english, or garbage on screen, which I have seen the same >>> issue on yocto1.0 release as well. this is a 10.04 ubuntu 64bit >>> machine. >>> >>> don't know what to say about it, just my OOB(out-of-box) experience >>> >>> xianghua >>> _______________________________________________ >>> yocto mailing list >>> yocto@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/yocto >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto >> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: building and using yocto 1.1 2011-10-28 16:23 ` Mark Hatle @ 2011-10-28 16:39 ` Xianghua Xiao 2011-10-28 16:47 ` Joshua Lock 0 siblings, 1 reply; 10+ messages in thread From: Xianghua Xiao @ 2011-10-28 16:39 UTC (permalink / raw) To: Mark Hatle; +Cc: yocto I do want to point out that: 1.1 is 12 hours while 1.0 was 8 hours, using the same machine on the same network, not sure why. input under sato does not work, it's showing some non-English letters while i type. xianghua On Fri, Oct 28, 2011 at 11:23 AM, Mark Hatle <mark.hatle@windriver.com> wrote: > On 10/28/11 11:13 AM, Xianghua Xiao wrote: >> core2duo E7200 2.53Ghz 4GB 500GB >> >> 1 thread 1 parallel due to past experience I had from the >> past(parallel make did not work well reliably) > > It is a goal of the Yocto Project (and Open Embedded) that parallel building is > full supported, and any identified bugs are fixed quickly. > > Enable parallel builds and your performance will be significantly better. > > If you have hyperthreading enabled, and setup a 4/4 parallel build. I would > expect about a 4-5 hour build time. (May be faster) > > --Mark > >> thanks, >> xianghua >> >> >> On Fri, Oct 28, 2011 at 9:45 AM, Mark Hatle <mark.hatle@windriver.com> wrote: >>> What machine are you using (amount of ram, disk space, and cpu cores)? >>> >>> What configuration did you set for parallel builds? >>> >>> I can build 1.1 on an 8 core i7 system w/ 8 GB of ram, set with parallel >>> settings of 8 thread and 8 parallel make jobs, in about 100 minutes (or less). >>> >>> --Mark >>> >>> On 10/28/11 9:20 AM, Xianghua Xiao wrote: >>>> when I built 1.0 out of the box, it took 7 hours. >>>> on the same machine/network, yocto 1.1 took a full 12 hours, not sure >>>> what happened to cause this nearly doubled build time. >>>> >>>> after the default build(bitbake core-image-sato), I run 'runqemu >>>> qemux86', click on 'tasks', try to add a new task, however my input is >>>> shown non-english, or garbage on screen, which I have seen the same >>>> issue on yocto1.0 release as well. this is a 10.04 ubuntu 64bit >>>> machine. >>>> >>>> don't know what to say about it, just my OOB(out-of-box) experience >>>> >>>> xianghua >>>> _______________________________________________ >>>> yocto mailing list >>>> yocto@yoctoproject.org >>>> https://lists.yoctoproject.org/listinfo/yocto >>> >>> _______________________________________________ >>> yocto mailing list >>> yocto@yoctoproject.org >>> https://lists.yoctoproject.org/listinfo/yocto >>> > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: building and using yocto 1.1 2011-10-28 16:39 ` Xianghua Xiao @ 2011-10-28 16:47 ` Joshua Lock 0 siblings, 0 replies; 10+ messages in thread From: Joshua Lock @ 2011-10-28 16:47 UTC (permalink / raw) To: yocto On 28/10/11 09:39, Xianghua Xiao wrote: > I do want to point out that: > 1.1 is 12 hours while 1.0 was 8 hours, using the same machine on the > same network, not sure why. > input under sato does not work, it's showing some non-English letters > while i type. The build time issue is known, we're doing more work (building more things) in 1.1 - however, reducing build time is a primary goal and I expect there to be a reduction in build time by the time 1.2 is released. Could you file a bug for your input issue? That way it's more likely that someone with the appropriate skill set will be made aware of it. http://bugzilla.yoctoproject.org Thanks, Joshua -- Joshua Lock Yocto Project "Johannes factotum" Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2011-10-28 17:17 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-10-28 14:20 building and using yocto 1.1 Xianghua Xiao 2011-10-28 14:45 ` Mark Hatle 2011-10-28 15:07 ` Xu, Jiajun 2011-10-28 16:13 ` Xianghua Xiao 2011-10-28 16:20 ` Xianghua Xiao 2011-10-28 16:45 ` Joshua Lock 2011-10-28 17:17 ` Xianghua Xiao 2011-10-28 16:23 ` Mark Hatle 2011-10-28 16:39 ` Xianghua Xiao 2011-10-28 16:47 ` Joshua Lock
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.